diff options
Diffstat (limited to 'drivers/usb/storage/Kconfig')
| -rw-r--r-- | drivers/usb/storage/Kconfig | 113 |
1 files changed, 113 insertions, 0 deletions
diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig new file mode 100644 index 00000000000..f1f1c0608c2 --- /dev/null +++ b/drivers/usb/storage/Kconfig @@ -0,0 +1,113 @@ +# +# USB Storage driver configuration +# + +comment "NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information" + depends on USB + +config USB_STORAGE + tristate "USB Mass Storage support" + depends on USB + select SCSI + ---help--- + Say Y here if you want to connect USB mass storage devices to your + computer's USB port. This is the driver you need for USB + floppy drives, USB hard disks, USB tape drives, USB CD-ROMs, + USB flash devices, and memory sticks, along with + similar devices. This driver may also be used for some cameras + and card readers. + + This option 'selects' (turns on, enables) 'SCSI', but you + probably also need 'SCSI device support: SCSI disk support' + (BLK_DEV_SD) for most USB storage devices. + + To compile this driver as a module, choose M here: the + module will be called usb-storage. + +config USB_STORAGE_DEBUG + bool "USB Mass Storage verbose debug" + depends on USB_STORAGE + help + Say Y here in order to have the USB Mass Storage code generate + verbose debugging messages. + +config USB_STORAGE_DATAFAB + bool "Datafab Compact Flash Reader support (EXPERIMENTAL)" + depends on USB_STORAGE && EXPERIMENTAL + help + Support for certain Datafab CompactFlash readers. + Datafab has a web page at <http://www.datafabusa.com/>. + +config USB_STORAGE_FREECOM + bool "Freecom USB/ATAPI Bridge support" + depends on USB_STORAGE + help + Support for the Freecom USB to IDE/ATAPI adaptor. + Freecom has a web page at <http://www.freecom.de/>. + +config USB_STORAGE_ISD200 + bool "ISD-200 USB/ATA Bridge support" + depends on USB_STORAGE && BLK_DEV_IDE + ---help--- + Say Y here if you want to use USB Mass Store devices based + on the In-Systems Design ISD-200 USB/ATA bridge. + + Some of the products that use this chip are: + + - Archos Jukebox 6000 + - ISD SmartCable for Storage + - Taiwan Skymaster CD530U/DEL-0241 IDE bridge + - Sony CRX10U CD-R/RW drive + - CyQ've CQ8060A CDRW drive + - Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U) + +config USB_STORAGE_DPCM + bool "Microtech/ZiO! CompactFlash/SmartMedia support" + depends on USB_STORAGE + help + Say Y here to support the Microtech/ZiO! CompactFlash reader. + There is a web page at <http://www.ziocorp.com/products/>. + +config USB_STORAGE_USBAT + bool "USBAT/USBAT02-based storage support (EXPERIMENTAL)" + depends on USB_STORAGE && EXPERIMENTAL + help + Say Y here to include additional code to support storage devices + based on the SCM/Shuttle USBAT/USBAT02 processors. + + Devices reported to work with this driver include: + - CompactFlash reader included with Kodak DC3800 camera + - Dane-Elec Zmate CompactFlash reader + - Delkin Efilm reader2 + - HP 8200e/8210e/8230e CD-Writer Plus drives + - I-JAM JS-50U + - Jessops CompactFlash JESDCFRU BLACK + - Kingston Technology PCREAD-USB/CF + - Maxell UA4 CompactFlash reader + - Memorex UCF-100 + - Microtech ZiO! ICS-45 CF2 + - RCA LYRA MP3 portable + - Sandisk ImageMate SDDR-05b + +config USB_STORAGE_SDDR09 + bool "SanDisk SDDR-09 (and other SmartMedia) support (EXPERIMENTAL)" + depends on USB_STORAGE && EXPERIMENTAL + help + Say Y here to include additional code to support the Sandisk SDDR-09 + SmartMedia reader in the USB Mass Storage driver. + Also works for the Microtech Zio! SmartMedia reader. + +config USB_STORAGE_SDDR55 + bool "SanDisk SDDR-55 SmartMedia support (EXPERIMENTAL)" + depends on USB_STORAGE && EXPERIMENTAL + help + Say Y here to include additional code to support the Sandisk SDDR-55 + SmartMedia reader in the USB Mass Storage driver. + +config USB_STORAGE_JUMPSHOT + bool "Lexar Jumpshot Compact Flash Reader (EXPERIMENTAL)" + depends on USB_STORAGE && EXPERIMENTAL + help + Say Y here to include additional code to support the Lexar Jumpshot + USB CompactFlash reader. + |