aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/serial')
-rw-r--r--drivers/usb/serial/omninet.c13
1 files changed, 6 insertions, 7 deletions
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index ea1105c84d5..ec16b92d52b 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -74,29 +74,28 @@ static struct usb_serial_driver * const serial_drivers[] = {
};
-/* The protocol.
+/*
+ * The protocol.
*
* The omni.net always exchange 64 bytes of data with the host. The first
- * four bytes are the control header, you can see it in the above structure.
+ * four bytes are the control header.
*
* oh_seq is a sequence number. Don't know if/how it's used.
* oh_len is the length of the data bytes in the packet.
* oh_xxx Bit-mapped, related to handshaking and status info.
- * I normally set it to 0x03 in trasmitted frames.
+ * I normally set it to 0x03 in transmitted frames.
* 7: Active when the TA is in a CONNECTed state.
* 6: unknown
* 5: handshaking, unknown
* 4: handshaking, unknown
* 3: unknown, usually 0
* 2: unknown, usually 0
- * 1: handshaking, unknown, usually set to 1 in trasmitted frames
- * 0: handshaking, unknown, usually set to 1 in trasmitted frames
+ * 1: handshaking, unknown, usually set to 1 in transmitted frames
+ * 0: handshaking, unknown, usually set to 1 in transmitted frames
* oh_pad Probably a pad byte.
*
* After the header you will find data bytes if oh_len was greater than zero.
- *
*/
-
struct omninet_header {
__u8 oh_seq;
__u8 oh_len;