diff options
Diffstat (limited to 'drivers/usb/serial/ssu100.c')
-rw-r--r-- | drivers/usb/serial/ssu100.c | 254 |
1 files changed, 165 insertions, 89 deletions
diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c index 6e82d4f54bc..660c31f1499 100644 --- a/drivers/usb/serial/ssu100.c +++ b/drivers/usb/serial/ssu100.c @@ -15,6 +15,7 @@ #include <linux/serial.h> #include <linux/usb.h> #include <linux/usb/serial.h> +#include <linux/serial_reg.h> #include <linux/uaccess.h> #define QT_OPEN_CLOSE_CHANNEL 0xca @@ -27,36 +28,11 @@ #define QT_HW_FLOW_CONTROL_MASK 0xc5 #define QT_SW_FLOW_CONTROL_MASK 0xc6 -#define MODEM_CTL_REGISTER 0x04 -#define MODEM_STATUS_REGISTER 0x06 - - -#define SERIAL_LSR_OE 0x02 -#define SERIAL_LSR_PE 0x04 -#define SERIAL_LSR_FE 0x08 -#define SERIAL_LSR_BI 0x10 - -#define SERIAL_LSR_TEMT 0x40 - -#define SERIAL_MCR_DTR 0x01 -#define SERIAL_MCR_RTS 0x02 -#define SERIAL_MCR_LOOP 0x10 - -#define SERIAL_MSR_CTS 0x10 -#define SERIAL_MSR_CD 0x80 -#define SERIAL_MSR_RI 0x40 -#define SERIAL_MSR_DSR 0x20 #define SERIAL_MSR_MASK 0xf0 -#define SERIAL_CRTSCTS ((SERIAL_MCR_RTS << 8) | SERIAL_MSR_CTS) +#define SERIAL_CRTSCTS ((UART_MCR_RTS << 8) | UART_MSR_CTS) -#define SERIAL_8_DATA 0x03 -#define SERIAL_7_DATA 0x02 -#define SERIAL_6_DATA 0x01 -#define SERIAL_5_DATA 0x00 - -#define SERIAL_ODD_PARITY 0X08 -#define SERIAL_EVEN_PARITY 0X18 +#define SERIAL_EVEN_PARITY (UART_LCR_PARITY | UART_LCR_EPAR) #define MAX_BAUD_RATE 460800 @@ -99,10 +75,12 @@ static struct usb_driver ssu100_driver = { }; struct ssu100_port_private { + spinlock_t status_lock; u8 shadowLSR; u8 shadowMSR; wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */ unsigned short max_packet_size; + struct async_icount icount; }; static void ssu100_release(struct usb_serial *serial) @@ -150,9 +128,10 @@ static inline int ssu100_getregister(struct usb_device *dev, static inline int ssu100_setregister(struct usb_device *dev, unsigned short uart, + unsigned short reg, u16 data) { - u16 value = (data << 8) | MODEM_CTL_REGISTER; + u16 value = (data << 8) | reg; return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), QT_SET_GET_REGISTER, 0x40, value, uart, @@ -178,11 +157,11 @@ static inline int update_mctrl(struct usb_device *dev, unsigned int set, clear &= ~set; /* 'set' takes precedence over 'clear' */ urb_value = 0; if (set & TIOCM_DTR) - urb_value |= SERIAL_MCR_DTR; + urb_value |= UART_MCR_DTR; if (set & TIOCM_RTS) - urb_value |= SERIAL_MCR_RTS; + urb_value |= UART_MCR_RTS; - result = ssu100_setregister(dev, 0, urb_value); + result = ssu100_setregister(dev, 0, UART_MCR, urb_value); if (result < 0) dbg("%s Error from MODEM_CTRL urb", __func__); @@ -264,24 +243,24 @@ static void ssu100_set_termios(struct tty_struct *tty, if (cflag & PARENB) { if (cflag & PARODD) - urb_value |= SERIAL_ODD_PARITY; + urb_value |= UART_LCR_PARITY; else urb_value |= SERIAL_EVEN_PARITY; } switch (cflag & CSIZE) { case CS5: - urb_value |= SERIAL_5_DATA; + urb_value |= UART_LCR_WLEN5; break; case CS6: - urb_value |= SERIAL_6_DATA; + urb_value |= UART_LCR_WLEN6; break; case CS7: - urb_value |= SERIAL_7_DATA; + urb_value |= UART_LCR_WLEN7; break; default: case CS8: - urb_value |= SERIAL_8_DATA; + urb_value |= UART_LCR_WLEN8; break; } @@ -333,6 +312,7 @@ static int ssu100_open(struct tty_struct *tty, struct usb_serial_port *port) struct ssu100_port_private *priv = usb_get_serial_port_data(port); u8 *data; int result; + unsigned long flags; dbg("%s - port %d", __func__, port->number); @@ -350,11 +330,10 @@ static int ssu100_open(struct tty_struct *tty, struct usb_serial_port *port) return result; } - priv->shadowLSR = data[0] & (SERIAL_LSR_OE | SERIAL_LSR_PE | - SERIAL_LSR_FE | SERIAL_LSR_BI); - - priv->shadowMSR = data[1] & (SERIAL_MSR_CTS | SERIAL_MSR_DSR | - SERIAL_MSR_RI | SERIAL_MSR_CD); + spin_lock_irqsave(&priv->status_lock, flags); + priv->shadowLSR = data[0]; + priv->shadowMSR = data[1]; + spin_unlock_irqrestore(&priv->status_lock, flags); kfree(data); @@ -398,11 +377,51 @@ static int get_serial_info(struct usb_serial_port *port, return 0; } +static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) +{ + struct ssu100_port_private *priv = usb_get_serial_port_data(port); + struct async_icount prev, cur; + unsigned long flags; + + spin_lock_irqsave(&priv->status_lock, flags); + prev = priv->icount; + spin_unlock_irqrestore(&priv->status_lock, flags); + + while (1) { + wait_event_interruptible(priv->delta_msr_wait, + ((priv->icount.rng != prev.rng) || + (priv->icount.dsr != prev.dsr) || + (priv->icount.dcd != prev.dcd) || + (priv->icount.cts != prev.cts))); + + if (signal_pending(current)) + return -ERESTARTSYS; + + spin_lock_irqsave(&priv->status_lock, flags); + cur = priv->icount; + spin_unlock_irqrestore(&priv->status_lock, flags); + + if ((prev.rng == cur.rng) && + (prev.dsr == cur.dsr) && + (prev.dcd == cur.dcd) && + (prev.cts == cur.cts)) + return -EIO; + + if ((arg & TIOCM_RNG && (prev.rng != cur.rng)) || + (arg & TIOCM_DSR && (prev.dsr != cur.dsr)) || + (arg & TIOCM_CD && (prev.dcd != cur.dcd)) || + (arg & TIOCM_CTS && (prev.cts != cur.cts))) + return 0; + } + return 0; +} + static int ssu100_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; struct ssu100_port_private *priv = usb_get_serial_port_data(port); + void __user *user_arg = (void __user *)arg; dbg("%s cmd 0x%04x", __func__, cmd); @@ -412,28 +431,28 @@ static int ssu100_ioctl(struct tty_struct *tty, struct file *file, (struct serial_struct __user *) arg); case TIOCMIWAIT: - while (priv != NULL) { - u8 prevMSR = priv->shadowMSR & SERIAL_MSR_MASK; - interruptible_sleep_on(&priv->delta_msr_wait); - /* see if a signal did it */ - if (signal_pending(current)) - return -ERESTARTSYS; - else { - u8 diff = (priv->shadowMSR & SERIAL_MSR_MASK) ^ prevMSR; - if (!diff) - return -EIO; /* no change => error */ - - /* Return 0 if caller wanted to know about - these bits */ - - if (((arg & TIOCM_RNG) && (diff & SERIAL_MSR_RI)) || - ((arg & TIOCM_DSR) && (diff & SERIAL_MSR_DSR)) || - ((arg & TIOCM_CD) && (diff & SERIAL_MSR_CD)) || - ((arg & TIOCM_CTS) && (diff & SERIAL_MSR_CTS))) - return 0; - } - } + return wait_modem_info(port, arg); + + case TIOCGICOUNT: + { + struct serial_icounter_struct icount; + struct async_icount cnow = priv->icount; + memset(&icount, 0, sizeof(icount)); + icount.cts = cnow.cts; + icount.dsr = cnow.dsr; + icount.rng = cnow.rng; + icount.dcd = cnow.dcd; + icount.rx = cnow.rx; + icount.tx = cnow.tx; + icount.frame = cnow.frame; + icount.overrun = cnow.overrun; + icount.parity = cnow.parity; + icount.brk = cnow.brk; + icount.buf_overrun = cnow.buf_overrun; + if (copy_to_user(user_arg, &icount, sizeof(icount))) + return -EFAULT; return 0; + } default: break; @@ -455,6 +474,7 @@ static void ssu100_set_max_packet_size(struct usb_serial_port *port) unsigned num_endpoints; int i; + unsigned long flags; num_endpoints = interface->cur_altsetting->desc.bNumEndpoints; dev_info(&udev->dev, "Number of endpoints %d\n", num_endpoints); @@ -466,7 +486,9 @@ static void ssu100_set_max_packet_size(struct usb_serial_port *port) } /* set max packet size based on descriptor */ + spin_lock_irqsave(&priv->status_lock, flags); priv->max_packet_size = ep_desc->wMaxPacketSize; + spin_unlock_irqrestore(&priv->status_lock, flags); dev_info(&udev->dev, "Setting MaxPacketSize %d\n", priv->max_packet_size); } @@ -485,9 +507,9 @@ static int ssu100_attach(struct usb_serial *serial) return -ENOMEM; } + spin_lock_init(&priv->status_lock); init_waitqueue_head(&priv->delta_msr_wait); usb_set_serial_port_data(port, priv); - ssu100_set_max_packet_size(port); return ssu100_initdevice(serial->dev); @@ -506,20 +528,20 @@ static int ssu100_tiocmget(struct tty_struct *tty, struct file *file) if (!d) return -ENOMEM; - r = ssu100_getregister(dev, 0, MODEM_CTL_REGISTER, d); + r = ssu100_getregister(dev, 0, UART_MCR, d); if (r < 0) goto mget_out; - r = ssu100_getregister(dev, 0, MODEM_STATUS_REGISTER, d+1); + r = ssu100_getregister(dev, 0, UART_MSR, d+1); if (r < 0) goto mget_out; - r = (d[0] & SERIAL_MCR_DTR ? TIOCM_DTR : 0) | - (d[0] & SERIAL_MCR_RTS ? TIOCM_RTS : 0) | - (d[1] & SERIAL_MSR_CTS ? TIOCM_CTS : 0) | - (d[1] & SERIAL_MSR_CD ? TIOCM_CAR : 0) | - (d[1] & SERIAL_MSR_RI ? TIOCM_RI : 0) | - (d[1] & SERIAL_MSR_DSR ? TIOCM_DSR : 0); + r = (d[0] & UART_MCR_DTR ? TIOCM_DTR : 0) | + (d[0] & UART_MCR_RTS ? TIOCM_RTS : 0) | + (d[1] & UART_MSR_CTS ? TIOCM_CTS : 0) | + (d[1] & UART_MSR_DCD ? TIOCM_CAR : 0) | + (d[1] & UART_MSR_RI ? TIOCM_RI : 0) | + (d[1] & UART_MSR_DSR ? TIOCM_DSR : 0); mget_out: kfree(d); @@ -546,7 +568,7 @@ static void ssu100_dtr_rts(struct usb_serial_port *port, int on) if (!port->serial->disconnected) { /* Disable flow control */ if (!on && - ssu100_setregister(dev, 0, 0) < 0) + ssu100_setregister(dev, 0, UART_MCR, 0) < 0) dev_err(&port->dev, "error from flowcontrol urb\n"); /* drop RTS and DTR */ if (on) @@ -557,34 +579,88 @@ static void ssu100_dtr_rts(struct usb_serial_port *port, int on) mutex_unlock(&port->serial->disc_mutex); } +static void ssu100_update_msr(struct usb_serial_port *port, u8 msr) +{ + struct ssu100_port_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + + spin_lock_irqsave(&priv->status_lock, flags); + priv->shadowMSR = msr; + spin_unlock_irqrestore(&priv->status_lock, flags); + + if (msr & UART_MSR_ANY_DELTA) { + /* update input line counters */ + if (msr & UART_MSR_DCTS) + priv->icount.cts++; + if (msr & UART_MSR_DDSR) + priv->icount.dsr++; + if (msr & UART_MSR_DDCD) + priv->icount.dcd++; + if (msr & UART_MSR_TERI) + priv->icount.rng++; + wake_up_interruptible(&priv->delta_msr_wait); + } +} + +static void ssu100_update_lsr(struct usb_serial_port *port, u8 lsr, + char *tty_flag) +{ + struct ssu100_port_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + + spin_lock_irqsave(&priv->status_lock, flags); + priv->shadowLSR = lsr; + spin_unlock_irqrestore(&priv->status_lock, flags); + + *tty_flag = TTY_NORMAL; + if (lsr & UART_LSR_BRK_ERROR_BITS) { + /* we always want to update icount, but we only want to + * update tty_flag for one case */ + if (lsr & UART_LSR_BI) { + priv->icount.brk++; + *tty_flag = TTY_BREAK; + usb_serial_handle_break(port); + } + if (lsr & UART_LSR_PE) { + priv->icount.parity++; + if (*tty_flag == TTY_NORMAL) + *tty_flag = TTY_PARITY; + } + if (lsr & UART_LSR_FE) { + priv->icount.frame++; + if (*tty_flag == TTY_NORMAL) + *tty_flag = TTY_FRAME; + } + if (lsr & UART_LSR_OE){ + priv->icount.overrun++; + if (*tty_flag == TTY_NORMAL) + *tty_flag = TTY_OVERRUN; + } + } + +} + static int ssu100_process_packet(struct tty_struct *tty, struct usb_serial_port *port, struct ssu100_port_private *priv, char *packet, int len) { int i; - char flag; + char flag = TTY_NORMAL; char *ch; dbg("%s - port %d", __func__, port->number); - if (len < 4) { - dbg("%s - malformed packet", __func__); - return 0; - } - - if ((packet[0] == 0x1b) && (packet[1] == 0x1b) && + if ((len >= 4) && + (packet[0] == 0x1b) && (packet[1] == 0x1b) && ((packet[2] == 0x00) || (packet[2] == 0x01))) { - if (packet[2] == 0x00) - priv->shadowLSR = packet[3] & (SERIAL_LSR_OE | - SERIAL_LSR_PE | - SERIAL_LSR_FE | - SERIAL_LSR_BI); - - if (packet[2] == 0x01) { - priv->shadowMSR = packet[3]; - wake_up_interruptible(&priv->delta_msr_wait); + if (packet[2] == 0x00) { + ssu100_update_lsr(port, packet[3], &flag); + if (flag == TTY_OVERRUN) + tty_insert_flip_char(tty, 0, TTY_OVERRUN); } + if (packet[2] == 0x01) + ssu100_update_msr(port, packet[3]); len -= 4; ch = packet + 4; @@ -631,7 +707,6 @@ static void ssu100_process_read_urb(struct urb *urb) tty_kref_put(tty); } - static struct usb_serial_driver ssu100_device = { .driver = { .owner = THIS_MODULE, @@ -653,6 +728,7 @@ static struct usb_serial_driver ssu100_device = { .tiocmset = ssu100_tiocmset, .ioctl = ssu100_ioctl, .set_termios = ssu100_set_termios, + .disconnect = usb_serial_generic_disconnect, }; static int __init ssu100_init(void) |