aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/serial/cypress_m8.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/serial/cypress_m8.c')
-rw-r--r--drivers/usb/serial/cypress_m8.c251
1 files changed, 152 insertions, 99 deletions
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 012e63e0580..05c44ae3ed3 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -453,8 +453,8 @@ static int generic_startup (struct usb_serial *serial)
priv->cbr_mask = B300;
usb_set_serial_port_data(serial->port[0], priv);
- return (0);
-}
+ return 0;
+}
static int cypress_earthmate_startup (struct usb_serial *serial)
@@ -464,14 +464,15 @@ static int cypress_earthmate_startup (struct usb_serial *serial)
dbg("%s", __FUNCTION__);
if (generic_startup(serial)) {
- dbg("%s - Failed setting up port %d", __FUNCTION__, serial->port[0]->number);
+ dbg("%s - Failed setting up port %d", __FUNCTION__,
+ serial->port[0]->number);
return 1;
}
priv = usb_get_serial_port_data(serial->port[0]);
priv->chiptype = CT_EARTHMATE;
-
- return (0);
+
+ return 0;
} /* cypress_earthmate_startup */
@@ -482,14 +483,15 @@ static int cypress_hidcom_startup (struct usb_serial *serial)
dbg("%s", __FUNCTION__);
if (generic_startup(serial)) {
- dbg("%s - Failed setting up port %d", __FUNCTION__, serial->port[0]->number);
+ dbg("%s - Failed setting up port %d", __FUNCTION__,
+ serial->port[0]->number);
return 1;
}
priv = usb_get_serial_port_data(serial->port[0]);
priv->chiptype = CT_CYPHIDCOM;
- return (0);
+ return 0;
} /* cypress_hidcom_startup */
@@ -909,7 +911,8 @@ static int cypress_ioctl (struct usb_serial_port *port, struct file * file, unsi
} /* cypress_ioctl */
-static void cypress_set_termios (struct usb_serial_port *port, struct termios *old_termios)
+static void cypress_set_termios (struct usb_serial_port *port,
+ struct termios *old_termios)
{
struct cypress_private *priv = usb_get_serial_port_data(port);
struct tty_struct *tty;
@@ -918,7 +921,7 @@ static void cypress_set_termios (struct usb_serial_port *port, struct termios *o
unsigned long flags;
__u8 oldlines;
int linechange = 0;
-
+
dbg("%s - port %d", __FUNCTION__, port->number);
tty = port->tty;
@@ -931,10 +934,12 @@ static void cypress_set_termios (struct usb_serial_port *port, struct termios *o
if (!priv->termios_initialized) {
if (priv->chiptype == CT_EARTHMATE) {
*(tty->termios) = tty_std_termios;
- tty->termios->c_cflag = B4800 | CS8 | CREAD | HUPCL | CLOCAL;
+ tty->termios->c_cflag = B4800 | CS8 | CREAD | HUPCL |
+ CLOCAL;
} else if (priv->chiptype == CT_CYPHIDCOM) {
*(tty->termios) = tty_std_termios;
- tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL |
+ CLOCAL;
}
priv->termios_initialized = 1;
}
@@ -946,12 +951,15 @@ static void cypress_set_termios (struct usb_serial_port *port, struct termios *o
/* check if there are new settings */
if (old_termios) {
if ((cflag != old_termios->c_cflag) ||
- (RELEVANT_IFLAG(iflag) != RELEVANT_IFLAG(old_termios->c_iflag))) {
- dbg("%s - attempting to set new termios settings", __FUNCTION__);
- /* should make a copy of this in case something goes wrong in the function, we can restore it */
+ (RELEVANT_IFLAG(iflag) !=
+ RELEVANT_IFLAG(old_termios->c_iflag))) {
+ dbg("%s - attempting to set new termios settings",
+ __FUNCTION__);
+ /* should make a copy of this in case something goes
+ * wrong in the function, we can restore it */
spin_lock_irqsave(&priv->lock, flags);
priv->tmp_termios = *(tty->termios);
- spin_unlock_irqrestore(&priv->lock, flags);
+ spin_unlock_irqrestore(&priv->lock, flags);
} else {
dbg("%s - nothing to do, exiting", __FUNCTION__);
return;
@@ -962,21 +970,34 @@ static void cypress_set_termios (struct usb_serial_port *port, struct termios *o
/* set number of data bits, parity, stop bits */
/* when parity is disabled the parity type bit is ignored */
- stop_bits = cflag & CSTOPB ? 1 : 0; /* 1 means 2 stop bits, 0 means 1 stop bit */
-
+ /* 1 means 2 stop bits, 0 means 1 stop bit */
+ stop_bits = cflag & CSTOPB ? 1 : 0;
+
if (cflag & PARENB) {
parity_enable = 1;
- parity_type = cflag & PARODD ? 1 : 0; /* 1 means odd parity, 0 means even parity */
+ /* 1 means odd parity, 0 means even parity */
+ parity_type = cflag & PARODD ? 1 : 0;
} else
parity_enable = parity_type = 0;
if (cflag & CSIZE) {
switch (cflag & CSIZE) {
- case CS5: data_bits = 0; break;
- case CS6: data_bits = 1; break;
- case CS7: data_bits = 2; break;
- case CS8: data_bits = 3; break;
- default: err("%s - CSIZE was set, but not CS5-CS8", __FUNCTION__); data_bits = 3;
+ case CS5:
+ data_bits = 0;
+ break;
+ case CS6:
+ data_bits = 1;
+ break;
+ case CS7:
+ data_bits = 2;
+ break;
+ case CS8:
+ data_bits = 3;
+ break;
+ default:
+ err("%s - CSIZE was set, but not CS5-CS8",
+ __FUNCTION__);
+ data_bits = 3;
}
} else
data_bits = 3;
@@ -991,63 +1012,85 @@ static void cypress_set_termios (struct usb_serial_port *port, struct termios *o
} else {
baud_mask = (cflag & CBAUD);
switch(baud_mask) {
- case B300: dbg("%s - setting baud 300bps", __FUNCTION__); break;
- case B600: dbg("%s - setting baud 600bps", __FUNCTION__); break;
- case B1200: dbg("%s - setting baud 1200bps", __FUNCTION__); break;
- case B2400: dbg("%s - setting baud 2400bps", __FUNCTION__); break;
- case B4800: dbg("%s - setting baud 4800bps", __FUNCTION__); break;
- case B9600: dbg("%s - setting baud 9600bps", __FUNCTION__); break;
- case B19200: dbg("%s - setting baud 19200bps", __FUNCTION__); break;
- case B38400: dbg("%s - setting baud 38400bps", __FUNCTION__); break;
- case B57600: dbg("%s - setting baud 57600bps", __FUNCTION__); break;
- case B115200: dbg("%s - setting baud 115200bps", __FUNCTION__); break;
- default: dbg("%s - unknown masked baud rate", __FUNCTION__);
+ case B300:
+ dbg("%s - setting baud 300bps", __FUNCTION__);
+ break;
+ case B600:
+ dbg("%s - setting baud 600bps", __FUNCTION__);
+ break;
+ case B1200:
+ dbg("%s - setting baud 1200bps", __FUNCTION__);
+ break;
+ case B2400:
+ dbg("%s - setting baud 2400bps", __FUNCTION__);
+ break;
+ case B4800:
+ dbg("%s - setting baud 4800bps", __FUNCTION__);
+ break;
+ case B9600:
+ dbg("%s - setting baud 9600bps", __FUNCTION__);
+ break;
+ case B19200:
+ dbg("%s - setting baud 19200bps", __FUNCTION__);
+ break;
+ case B38400:
+ dbg("%s - setting baud 38400bps", __FUNCTION__);
+ break;
+ case B57600:
+ dbg("%s - setting baud 57600bps", __FUNCTION__);
+ break;
+ case B115200:
+ dbg("%s - setting baud 115200bps", __FUNCTION__);
+ break;
+ default:
+ dbg("%s - unknown masked baud rate", __FUNCTION__);
}
priv->line_control = (CONTROL_DTR | CONTROL_RTS);
}
spin_unlock_irqrestore(&priv->lock, flags);
-
- dbg("%s - sending %d stop_bits, %d parity_enable, %d parity_type, %d data_bits (+5)", __FUNCTION__,
- stop_bits, parity_enable, parity_type, data_bits);
- cypress_serial_control(port, baud_mask, data_bits, stop_bits, parity_enable,
- parity_type, 0, CYPRESS_SET_CONFIG);
+ dbg("%s - sending %d stop_bits, %d parity_enable, %d parity_type, "
+ "%d data_bits (+5)", __FUNCTION__, stop_bits,
+ parity_enable, parity_type, data_bits);
+
+ cypress_serial_control(port, baud_mask, data_bits, stop_bits,
+ parity_enable, parity_type, 0, CYPRESS_SET_CONFIG);
- /* we perform a CYPRESS_GET_CONFIG so that the current settings are filled into the private structure
- * this should confirm that all is working if it returns what we just set */
+ /* we perform a CYPRESS_GET_CONFIG so that the current settings are
+ * filled into the private structure this should confirm that all is
+ * working if it returns what we just set */
cypress_serial_control(port, 0, 0, 0, 0, 0, 0, CYPRESS_GET_CONFIG);
- /* Here we can define custom tty settings for devices
- *
- * the main tty termios flag base comes from empeg.c
- */
+ /* Here we can define custom tty settings for devices; the main tty
+ * termios flag base comes from empeg.c */
- spin_lock_irqsave(&priv->lock, flags);
+ spin_lock_irqsave(&priv->lock, flags);
if ( (priv->chiptype == CT_EARTHMATE) && (priv->baud_rate == 4800) ) {
-
- dbg("Using custom termios settings for a baud rate of 4800bps.");
+ dbg("Using custom termios settings for a baud rate of "
+ "4800bps.");
/* define custom termios settings for NMEA protocol */
tty->termios->c_iflag /* input modes - */
- &= ~(IGNBRK /* disable ignore break */
- | BRKINT /* disable break causes interrupt */
- | PARMRK /* disable mark parity errors */
- | ISTRIP /* disable clear high bit of input characters */
- | INLCR /* disable translate NL to CR */
- | IGNCR /* disable ignore CR */
- | ICRNL /* disable translate CR to NL */
- | IXON); /* disable enable XON/XOFF flow control */
-
+ &= ~(IGNBRK /* disable ignore break */
+ | BRKINT /* disable break causes interrupt */
+ | PARMRK /* disable mark parity errors */
+ | ISTRIP /* disable clear high bit of input char */
+ | INLCR /* disable translate NL to CR */
+ | IGNCR /* disable ignore CR */
+ | ICRNL /* disable translate CR to NL */
+ | IXON); /* disable enable XON/XOFF flow control */
+
tty->termios->c_oflag /* output modes */
- &= ~OPOST; /* disable postprocess output characters */
-
- tty->termios->c_lflag /* line discipline modes */
- &= ~(ECHO /* disable echo input characters */
- | ECHONL /* disable echo new line */
- | ICANON /* disable erase, kill, werase, and rprnt special characters */
- | ISIG /* disable interrupt, quit, and suspend special characters */
- | IEXTEN); /* disable non-POSIX special characters */
+ &= ~OPOST; /* disable postprocess output char */
+ tty->termios->c_lflag /* line discipline modes */
+ &= ~(ECHO /* disable echo input characters */
+ | ECHONL /* disable echo new line */
+ | ICANON /* disable erase, kill, werase, and rprnt
+ special characters */
+ | ISIG /* disable interrupt, quit, and suspend
+ special characters */
+ | IEXTEN); /* disable non-POSIX special characters */
} /* CT_CYPHIDCOM: Application should handle this for device */
linechange = (priv->line_control != oldlines);
@@ -1060,7 +1103,7 @@ static void cypress_set_termios (struct usb_serial_port *port, struct termios *o
}
} /* cypress_set_termios */
-
+
/* returns amount of data still left in soft buffer */
static int cypress_chars_in_buffer(struct usb_serial_port *port)
{
@@ -1088,7 +1131,7 @@ static void cypress_throttle (struct usb_serial_port *port)
spin_lock_irqsave(&priv->lock, flags);
priv->rx_flags = THROTTLED;
- spin_unlock_irqrestore(&priv->lock, flags);
+ spin_unlock_irqrestore(&priv->lock, flags);
}
@@ -1110,7 +1153,8 @@ static void cypress_unthrottle (struct usb_serial_port *port)
result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
if (result)
- dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __FUNCTION__, result);
+ dev_err(&port->dev, "%s - failed submitting read urb, "
+ "error %d\n", __FUNCTION__, result);
}
}
@@ -1122,7 +1166,7 @@ static void cypress_read_int_callback(struct urb *urb, struct pt_regs *regs)
struct tty_struct *tty;
unsigned char *data = urb->transfer_buffer;
unsigned long flags;
- char tty_flag = TTY_NORMAL;
+ char tty_flag = TTY_NORMAL;
int havedata = 0;
int bytes = 0;
int result;
@@ -1131,7 +1175,8 @@ static void cypress_read_int_callback(struct urb *urb, struct pt_regs *regs)
dbg("%s - port %d", __FUNCTION__, port->number);
if (urb->status) {
- dbg("%s - nonzero read status received: %d", __FUNCTION__, urb->status);
+ dbg("%s - nonzero read status received: %d", __FUNCTION__,
+ urb->status);
return;
}
@@ -1155,51 +1200,55 @@ static void cypress_read_int_callback(struct urb *urb, struct pt_regs *regs)
case 32:
/* This is for the CY7C64013... */
priv->current_status = data[0] & 0xF8;
- bytes = data[1]+2;
- i=2;
+ bytes = data[1] + 2;
+ i = 2;
if (bytes > 2)
havedata = 1;
break;
case 8:
/* This is for the CY7C63743... */
priv->current_status = data[0] & 0xF8;
- bytes = (data[0] & 0x07)+1;
- i=1;
+ bytes = (data[0] & 0x07) + 1;
+ i = 1;
if (bytes > 1)
havedata = 1;
break;
default:
- dbg("%s - wrong packet size - received %d bytes", __FUNCTION__, urb->actual_length);
+ dbg("%s - wrong packet size - received %d bytes",
+ __FUNCTION__, urb->actual_length);
spin_unlock_irqrestore(&priv->lock, flags);
goto continue_read;
}
spin_unlock_irqrestore(&priv->lock, flags);
- usb_serial_debug_data (debug, &port->dev, __FUNCTION__, urb->actual_length, data);
+ usb_serial_debug_data (debug, &port->dev, __FUNCTION__,
+ urb->actual_length, data);
spin_lock_irqsave(&priv->lock, flags);
/* check to see if status has changed */
if (priv != NULL) {
if (priv->current_status != priv->prev_status) {
- priv->diff_status |= priv->current_status ^ priv->prev_status;
+ priv->diff_status |= priv->current_status ^
+ priv->prev_status;
wake_up_interruptible(&priv->delta_msr_wait);
priv->prev_status = priv->current_status;
}
}
- spin_unlock_irqrestore(&priv->lock, flags);
+ spin_unlock_irqrestore(&priv->lock, flags);
- /* hangup, as defined in acm.c... this might be a bad place for it though */
- if (tty && !(tty->termios->c_cflag & CLOCAL) && !(priv->current_status & UART_CD)) {
+ /* hangup, as defined in acm.c... this might be a bad place for it
+ * though */
+ if (tty && !(tty->termios->c_cflag & CLOCAL) &&
+ !(priv->current_status & UART_CD)) {
dbg("%s - calling hangup", __FUNCTION__);
tty_hangup(tty);
goto continue_read;
}
- /* There is one error bit... I'm assuming it is a parity error indicator
- * as the generic firmware will set this bit to 1 if a parity error occurs.
- * I can not find reference to any other error events.
- *
- */
+ /* There is one error bit... I'm assuming it is a parity error
+ * indicator as the generic firmware will set this bit to 1 if a
+ * parity error occurs.
+ * I can not find reference to any other error events. */
spin_lock_irqsave(&priv->lock, flags);
if (priv->current_status & CYP_ERROR) {
spin_unlock_irqrestore(&priv->lock, flags);
@@ -1211,7 +1260,8 @@ static void cypress_read_int_callback(struct urb *urb, struct pt_regs *regs)
/* process read if there is data other than line status */
if (tty && (bytes > i)) {
for (; i < bytes ; ++i) {
- dbg("pushing byte number %d - %d - %c",i,data[i],data[i]);
+ dbg("pushing byte number %d - %d - %c", i, data[i],
+ data[i]);
if(tty->flip.count >= TTY_FLIPBUF_SIZE) {
tty_flip_buffer_push(tty);
}
@@ -1221,25 +1271,28 @@ static void cypress_read_int_callback(struct urb *urb, struct pt_regs *regs)
}
spin_lock_irqsave(&priv->lock, flags);
- priv->bytes_in += bytes; /* control and status byte(s) are also counted */
+ /* control and status byte(s) are also counted */
+ priv->bytes_in += bytes;
spin_unlock_irqrestore(&priv->lock, flags);
continue_read:
-
- /* Continue trying to always read... unless the port has closed. */
+
+ /* Continue trying to always read... unless the port has closed. */
if (port->open_count > 0) {
- usb_fill_int_urb(port->interrupt_in_urb, port->serial->dev,
- usb_rcvintpipe(port->serial->dev, port->interrupt_in_endpointAddress),
- port->interrupt_in_urb->transfer_buffer,
- port->interrupt_in_urb->transfer_buffer_length,
- cypress_read_int_callback, port,
- interval);
- result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
- if (result)
- dev_err(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result);
+ usb_fill_int_urb(port->interrupt_in_urb, port->serial->dev,
+ usb_rcvintpipe(port->serial->dev,
+ port->interrupt_in_endpointAddress),
+ port->interrupt_in_urb->transfer_buffer,
+ port->interrupt_in_urb->transfer_buffer_length,
+ cypress_read_int_callback, port, interval);
+ result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
+ if (result)
+ dev_err(&urb->dev->dev, "%s - failed resubmitting "
+ "read urb, error %d\n", __FUNCTION__,
+ result);
}
-
+
return;
} /* cypress_read_int_callback */
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-15 08:48:19 +0000