diff options
Diffstat (limited to 'drivers/usb/serial/aircable.c')
| -rw-r--r-- | drivers/usb/serial/aircable.c | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c index b675735bfbe..fbc8c27d5d9 100644 --- a/drivers/usb/serial/aircable.c +++ b/drivers/usb/serial/aircable.c @@ -9,7 +9,7 @@ * The device works as an standard CDC device, it has 2 interfaces, the first * one is for firmware access and the second is the serial one. * The protocol is very simply, there are two posibilities reading or writing. - * When writting the first urb must have a Header that starts with 0x20 0x29 the + * When writing the first urb must have a Header that starts with 0x20 0x29 the * next two bytes must say how much data will be sended. * When reading the process is almost equal except that the header starts with * 0x00 0x20. @@ -18,7 +18,7 @@ * buffer: The First and Second byte is used for a Header, the Third and Fourth * tells the device the amount of information the package holds. * Packages are 60 bytes long Header Stuff. - * When writting to the device the first two bytes of the header are 0x20 0x29 + * When writing to the device the first two bytes of the header are 0x20 0x29 * When reading the bytes are 0x00 0x20, or 0x00 0x10, there is an strange * situation, when too much data arrives to the device because it sends the data * but with out the header. I will use a simply hack to override this situation, |