aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/musb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/musb')
-rw-r--r--drivers/usb/musb/Kconfig16
-rw-r--r--drivers/usb/musb/Makefile71
-rw-r--r--drivers/usb/musb/am35x.c524
-rw-r--r--drivers/usb/musb/blackfin.c7
-rw-r--r--drivers/usb/musb/cppi_dma.c2
-rw-r--r--drivers/usb/musb/da8xx.c469
-rw-r--r--drivers/usb/musb/davinci.c2
-rw-r--r--drivers/usb/musb/musb_core.c57
-rw-r--r--drivers/usb/musb/musb_core.h2
-rw-r--r--drivers/usb/musb/musb_debug.h11
-rw-r--r--drivers/usb/musb/musb_gadget.c132
-rw-r--r--drivers/usb/musb/musb_gadget.h2
-rw-r--r--drivers/usb/musb/musb_host.c11
-rw-r--r--drivers/usb/musb/musbhsdma.c2
-rw-r--r--drivers/usb/musb/omap2430.c1
-rw-r--r--drivers/usb/musb/tusb6010.c4
16 files changed, 1164 insertions, 149 deletions
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index cfd38edfcf9..341a37a469b 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -45,6 +45,9 @@ config USB_MUSB_SOC
comment "DaVinci 35x and 644x USB support"
depends on USB_MUSB_HDRC && ARCH_DAVINCI_DMx
+comment "DA8xx/OMAP-L1x USB support"
+ depends on USB_MUSB_HDRC && ARCH_DAVINCI_DA8XX
+
comment "OMAP 243x high speed USB support"
depends on USB_MUSB_HDRC && ARCH_OMAP2430
@@ -57,6 +60,17 @@ comment "OMAP 44xx high speed USB support"
comment "Blackfin high speed USB Support"
depends on USB_MUSB_HDRC && ((BF54x && !BF544) || (BF52x && !BF522 && !BF523))
+config USB_MUSB_AM35X
+ bool
+ depends on USB_MUSB_HDRC && !ARCH_OMAP2430 && !ARCH_OMAP4
+ select NOP_USB_XCEIV
+ default MACH_OMAP3517EVM
+ help
+ Select this option if your platform is based on AM35x. As
+ AM35x has an updated MUSB with CPPI4.1 DMA so this config
+ is introduced to differentiate musb ip between OMAP3x and
+ AM35x platforms.
+
config USB_TUSB6010
boolean "TUSB 6010 support"
depends on USB_MUSB_HDRC && !USB_MUSB_SOC
@@ -144,7 +158,7 @@ config USB_MUSB_HDRC_HCD
config MUSB_PIO_ONLY
bool 'Disable DMA (always use PIO)'
depends on USB_MUSB_HDRC
- default y if USB_TUSB6010
+ default USB_TUSB6010 || ARCH_DAVINCI_DA8XX || USB_MUSB_AM35X
help
All data is copied between memory and FIFO by the CPU.
DMA controllers are ignored.
diff --git a/drivers/usb/musb/Makefile b/drivers/usb/musb/Makefile
index 9705f716386..ce164e8998d 100644
--- a/drivers/usb/musb/Makefile
+++ b/drivers/usb/musb/Makefile
@@ -2,49 +2,27 @@
# for USB OTG silicon based on Mentor Graphics INVENTRA designs
#
-musb_hdrc-objs := musb_core.o
+ccflags-$(CONFIG_USB_MUSB_DEBUG) := -DDEBUG
-obj-$(CONFIG_USB_MUSB_HDRC) += musb_hdrc.o
+obj-$(CONFIG_USB_MUSB_HDRC) += musb_hdrc.o
-ifeq ($(CONFIG_ARCH_DAVINCI_DMx),y)
- musb_hdrc-objs += davinci.o
-endif
-
-ifeq ($(CONFIG_USB_TUSB6010),y)
- musb_hdrc-objs += tusb6010.o
-endif
-
-ifeq ($(CONFIG_ARCH_OMAP2430),y)
- musb_hdrc-objs += omap2430.o
-endif
-
-ifeq ($(CONFIG_ARCH_OMAP3430),y)
- musb_hdrc-objs += omap2430.o
-endif
-
-ifeq ($(CONFIG_ARCH_OMAP4),y)
- musb_hdrc-objs += omap2430.o
-endif
-
-ifeq ($(CONFIG_BF54x),y)
- musb_hdrc-objs += blackfin.o
-endif
+musb_hdrc-y := musb_core.o
-ifeq ($(CONFIG_BF52x),y)
- musb_hdrc-objs += blackfin.o
-endif
-
-ifeq ($(CONFIG_USB_GADGET_MUSB_HDRC),y)
- musb_hdrc-objs += musb_gadget_ep0.o musb_gadget.o
-endif
-
-ifeq ($(CONFIG_USB_MUSB_HDRC_HCD),y)
- musb_hdrc-objs += musb_virthub.o musb_host.o
-endif
-
-ifeq ($(CONFIG_DEBUG_FS),y)
- musb_hdrc-objs += musb_debugfs.o
+musb_hdrc-$(CONFIG_ARCH_DAVINCI_DMx) += davinci.o
+musb_hdrc-$(CONFIG_ARCH_DAVINCI_DA8XX) += da8xx.o
+musb_hdrc-$(CONFIG_USB_TUSB6010) += tusb6010.o
+musb_hdrc-$(CONFIG_ARCH_OMAP2430) += omap2430.o
+ifeq ($(CONFIG_USB_MUSB_AM35X),y)
+ musb_hdrc-$(CONFIG_ARCH_OMAP3430) += am35x.o
+else
+ musb_hdrc-$(CONFIG_ARCH_OMAP3430) += omap2430.o
endif
+musb_hdrc-$(CONFIG_ARCH_OMAP4) += omap2430.o
+musb_hdrc-$(CONFIG_BF54x) += blackfin.o
+musb_hdrc-$(CONFIG_BF52x) += blackfin.o
+musb_hdrc-$(CONFIG_USB_GADGET_MUSB_HDRC) += musb_gadget_ep0.o musb_gadget.o
+musb_hdrc-$(CONFIG_USB_MUSB_HDRC_HCD) += musb_virthub.o musb_host.o
+musb_hdrc-$(CONFIG_DEBUG_FS) += musb_debugfs.o
# the kconfig must guarantee that only one of the
# possible I/O schemes will be enabled at a time ...
@@ -54,26 +32,17 @@ endif
ifneq ($(CONFIG_MUSB_PIO_ONLY),y)
ifeq ($(CONFIG_USB_INVENTRA_DMA),y)
- musb_hdrc-objs += musbhsdma.o
+ musb_hdrc-y += musbhsdma.o
else
ifeq ($(CONFIG_USB_TI_CPPI_DMA),y)
- musb_hdrc-objs += cppi_dma.o
+ musb_hdrc-y += cppi_dma.o
else
ifeq ($(CONFIG_USB_TUSB_OMAP_DMA),y)
- musb_hdrc-objs += tusb6010_omap.o
+ musb_hdrc-y += tusb6010_omap.o
endif
endif
endif
endif
-
-
-################################################################################
-
-# Debugging
-
-ifeq ($(CONFIG_USB_MUSB_DEBUG),y)
- EXTRA_CFLAGS += -DDEBUG
-endif
diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c
new file mode 100644
index 00000000000..b0aabf3a606
--- /dev/null
+++ b/drivers/usb/musb/am35x.c
@@ -0,0 +1,524 @@
+/*
+ * Texas Instruments AM35x "glue layer"
+ *
+ * Copyright (c) 2010, by Texas Instruments
+ *
+ * Based on the DA8xx "glue layer" code.
+ * Copyright (c) 2008-2009, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This file is part of the Inventra Controller Driver for Linux.
+ *
+ * The Inventra Controller Driver for Linux is free software; you
+ * can redistribute it and/or modify it under the terms of the GNU
+ * General Public License version 2 as published by the Free Software
+ * Foundation.
+ *
+ * The Inventra Controller Driver for Linux is distributed in
+ * the hope that it will be useful, but WITHOUT ANY WARRANTY;
+ * without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
+ * License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with The Inventra Controller Driver for Linux ; if not,
+ * write to the Free Software Foundation, Inc., 59 Temple Place,
+ * Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <plat/control.h>
+#include <plat/usb.h>
+
+#include "musb_core.h"
+
+/*
+ * AM35x specific definitions
+ */
+/* USB 2.0 OTG module registers */
+#define USB_REVISION_REG 0x00
+#define USB_CTRL_REG 0x04
+#define USB_STAT_REG 0x08
+#define USB_EMULATION_REG 0x0c
+/* 0x10 Reserved */
+#define USB_AUTOREQ_REG 0x14
+#define USB_SRP_FIX_TIME_REG 0x18
+#define USB_TEARDOWN_REG 0x1c
+#define EP_INTR_SRC_REG 0x20
+#define EP_INTR_SRC_SET_REG 0x24
+#define EP_INTR_SRC_CLEAR_REG 0x28
+#define EP_INTR_MASK_REG 0x2c
+#define EP_INTR_MASK_SET_REG 0x30
+#define EP_INTR_MASK_CLEAR_REG 0x34
+#define EP_INTR_SRC_MASKED_REG 0x38
+#define CORE_INTR_SRC_REG 0x40
+#define CORE_INTR_SRC_SET_REG 0x44
+#define CORE_INTR_SRC_CLEAR_REG 0x48
+#define CORE_INTR_MASK_REG 0x4c
+#define CORE_INTR_MASK_SET_REG 0x50
+#define CORE_INTR_MASK_CLEAR_REG 0x54
+#define CORE_INTR_SRC_MASKED_REG 0x58
+/* 0x5c Reserved */
+#define USB_END_OF_INTR_REG 0x60
+
+/* Control register bits */
+#define AM35X_SOFT_RESET_MASK 1
+
+/* USB interrupt register bits */
+#define AM35X_INTR_USB_SHIFT 16
+#define AM35X_INTR_USB_MASK (0x1ff << AM35X_INTR_USB_SHIFT)
+#define AM35X_INTR_DRVVBUS 0x100
+#define AM35X_INTR_RX_SHIFT 16
+#define AM35X_INTR_TX_SHIFT 0
+#define AM35X_TX_EP_MASK 0xffff /* EP0 + 15 Tx EPs */
+#define AM35X_RX_EP_MASK 0xfffe /* 15 Rx EPs */
+#define AM35X_TX_INTR_MASK (AM35X_TX_EP_MASK << AM35X_INTR_TX_SHIFT)
+#define AM35X_RX_INTR_MASK (AM35X_RX_EP_MASK << AM35X_INTR_RX_SHIFT)
+
+#define USB_MENTOR_CORE_OFFSET 0x400
+
+static inline void phy_on(void)
+{
+ unsigned long timeout = jiffies + msecs_to_jiffies(100);
+ u32 devconf2;
+
+ /*
+ * Start the on-chip PHY and its PLL.
+ */
+ devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
+
+ devconf2 &= ~(CONF2_RESET | CONF2_PHYPWRDN | CONF2_OTGPWRDN);
+ devconf2 |= CONF2_PHY_PLLON;
+
+ omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
+
+ DBG(1, "Waiting for PHY clock good...\n");
+ while (!(omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2)
+ & CONF2_PHYCLKGD)) {
+ cpu_relax();
+
+ if (time_after(jiffies, timeout)) {
+ DBG(1, "musb PHY clock good timed out\n");
+ break;
+ }
+ }
+}
+
+static inline void phy_off(void)
+{
+ u32 devconf2;
+
+ /*
+ * Power down the on-chip PHY.
+ */
+ devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
+
+ devconf2 &= ~CONF2_PHY_PLLON;
+ devconf2 |= CONF2_PHYPWRDN | CONF2_OTGPWRDN;
+ omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
+}
+
+/*
+ * musb_platform_enable - enable interrupts
+ */
+void musb_platform_enable(struct musb *musb)
+{
+ void __iomem *reg_base = musb->ctrl_base;
+ u32 epmask;
+
+ /* Workaround: setup IRQs through both register sets. */
+ epmask = ((musb->epmask & AM35X_TX_EP_MASK) << AM35X_INTR_TX_SHIFT) |
+ ((musb->epmask & AM35X_RX_EP_MASK) << AM35X_INTR_RX_SHIFT);
+
+ musb_writel(reg_base, EP_INTR_MASK_SET_REG, epmask);
+ musb_writel(reg_base, CORE_INTR_MASK_SET_REG, AM35X_INTR_USB_MASK);
+
+ /* Force the DRVVBUS IRQ so we can start polling for ID change. */
+ if (is_otg_enabled(musb))
+ musb_writel(reg_base, CORE_INTR_SRC_SET_REG,
+ AM35X_INTR_DRVVBUS << AM35X_INTR_USB_SHIFT);
+}
+
+/*
+ * musb_platform_disable - disable HDRC and flush interrupts
+ */
+void musb_platform_disable(struct musb *musb)
+{
+ void __iomem *reg_base = musb->ctrl_base;
+
+ musb_writel(reg_base, CORE_INTR_MASK_CLEAR_REG, AM35X_INTR_USB_MASK);
+ musb_writel(reg_base, EP_INTR_MASK_CLEAR_REG,
+ AM35X_TX_INTR_MASK | AM35X_RX_INTR_MASK);
+ musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
+ musb_writel(reg_base, USB_END_OF_INTR_REG, 0);
+}
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+#define portstate(stmt) stmt
+#else
+#define portstate(stmt)
+#endif
+
+static void am35x_set_vbus(struct musb *musb, int is_on)
+{
+ WARN_ON(is_on && is_peripheral_active(musb));
+}
+
+#define POLL_SECONDS 2
+
+static struct timer_list otg_workaround;
+
+static void otg_timer(unsigned long _musb)
+{
+ struct musb *musb = (void *)_musb;
+ void __iomem *mregs = musb->mregs;
+ u8 devctl;
+ unsigned long flags;
+
+ /*
+ * We poll because AM35x's won't expose several OTG-critical
+ * status change events (from the transceiver) otherwise.
+ */
+ devctl = musb_readb(mregs, MUSB_DEVCTL);
+ DBG(7, "Poll devctl %02x (%s)\n", devctl, otg_state_string(musb));
+
+ spin_lock_irqsave(&musb->lock, flags);
+ switch (musb->xceiv->state) {
+ case OTG_STATE_A_WAIT_BCON:
+ devctl &= ~MUSB_DEVCTL_SESSION;
+ musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+
+ devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+ if (devctl & MUSB_DEVCTL_BDEVICE) {
+ musb->xceiv->state = OTG_STATE_B_IDLE;
+ MUSB_DEV_MODE(musb);
+ } else {
+ musb->xceiv->state = OTG_STATE_A_IDLE;
+ MUSB_HST_MODE(musb);
+ }
+ break;
+ case OTG_STATE_A_WAIT_VFALL:
+ musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
+ musb_writel(musb->ctrl_base, CORE_INTR_SRC_SET_REG,
+ MUSB_INTR_VBUSERROR << AM35X_INTR_USB_SHIFT);
+ break;
+ case OTG_STATE_B_IDLE:
+ if (!is_peripheral_enabled(musb))
+ break;
+
+ devctl = musb_readb(mregs, MUSB_DEVCTL);
+ if (devctl & MUSB_DEVCTL_BDEVICE)
+ mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
+ else
+ musb->xceiv->state = OTG_STATE_A_IDLE;
+ break;
+ default:
+ break;
+ }
+ spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
+{
+ static unsigned long last_timer;
+
+ if (!is_otg_enabled(musb))
+ return;
+
+ if (timeout == 0)
+ timeout = jiffies + msecs_to_jiffies(3);
+
+ /* Never idle if active, or when VBUS timeout is not set as host */
+ if (musb->is_active || (musb->a_wait_bcon == 0 &&
+ musb->xceiv->state == OTG_STATE_A_WAIT_BCON)) {
+ DBG(4, "%s active, deleting timer\n", otg_state_string(musb));
+ del_timer(&otg_workaround);
+ last_timer = jiffies;
+ return;
+ }
+
+ if (time_after(last_timer, timeout) && timer_pending(&otg_workaround)) {
+ DBG(4, "Longer idle timer already pending, ignoring...\n");
+ return;
+ }
+ last_timer = timeout;
+
+ DBG(4, "%s inactive, starting idle timer for %u ms\n",
+ otg_state_string(musb), jiffies_to_msecs(timeout - jiffies));
+ mod_timer(&otg_workaround, timeout);
+}
+
+static irqreturn_t am35x_interrupt(int irq, void *hci)
+{
+ struct musb *musb = hci;
+ void __iomem *reg_base = musb->ctrl_base;
+ unsigned long flags;
+ irqreturn_t ret = IRQ_NONE;
+ u32 epintr, usbintr, lvl_intr;
+
+ spin_lock_irqsave(&musb->lock, flags);
+
+ /* Get endpoint interrupts */
+ epintr = musb_readl(reg_base, EP_INTR_SRC_MASKED_REG);
+
+ if (epintr) {
+ musb_writel(reg_base, EP_INTR_SRC_CLEAR_REG, epintr);
+
+ musb->int_rx =
+ (epintr & AM35X_RX_INTR_MASK) >> AM35X_INTR_RX_SHIFT;
+ musb->int_tx =
+ (epintr & AM35X_TX_INTR_MASK) >> AM35X_INTR_TX_SHIFT;
+ }
+
+ /* Get usb core interrupts */
+ usbintr = musb_readl(reg_base, CORE_INTR_SRC_MASKED_REG);
+ if (!usbintr && !epintr)
+ goto eoi;
+
+ if (usbintr) {
+ musb_writel(reg_base, CORE_INTR_SRC_CLEAR_REG, usbintr);
+
+ musb->int_usb =
+ (usbintr & AM35X_INTR_USB_MASK) >> AM35X_INTR_USB_SHIFT;
+ }
+ /*
+ * DRVVBUS IRQs are the only proxy we have (a very poor one!) for
+ * AM35x's missing ID change IRQ. We need an ID change IRQ to
+ * switch appropriately between halves of the OTG state machine.
+ * Managing DEVCTL.SESSION per Mentor docs requires that we know its
+ * value but DEVCTL.BDEVICE is invalid without DEVCTL.SESSION set.
+ * Also, DRVVBUS pulses for SRP (but not at 5V) ...
+ */
+ if (usbintr & (AM35X_INTR_DRVVBUS << AM35X_INTR_USB_SHIFT)) {
+ int drvvbus = musb_readl(reg_base, USB_STAT_REG);
+ void __iomem *mregs = musb->mregs;
+ u8 devctl = musb_readb(mregs, MUSB_DEVCTL);
+ int err;
+
+ err = is_host_enabled(musb) && (musb->int_usb &
+ MUSB_INTR_VBUSERROR);
+ if (err) {
+ /*
+ * The Mentor core doesn't debounce VBUS as needed
+ * to cope with device connect current spikes. This
+ * means it's not uncommon for bus-powered devices
+ * to get VBUS errors during enumeration.
+ *
+ * This is a workaround, but newer RTL from Mentor
+ * seems to allow a better one: "re"-starting sessions
+ * without waiting for VBUS to stop registering in
+ * devctl.
+ */
+ musb->int_usb &= ~MUSB_INTR_VBUSERROR;
+ musb->xceiv->state = OTG_STATE_A_WAIT_VFALL;
+ mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
+ WARNING("VBUS error workaround (delay coming)\n");
+ } else if (is_host_enabled(musb) && drvvbus) {
+ MUSB_HST_MODE(musb);
+ musb->xceiv->default_a = 1;
+ musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
+ portstate(musb->port1_status |= USB_PORT_STAT_POWER);
+ del_timer(&otg_workaround);
+ } else {
+ musb->is_active = 0;
+ MUSB_DEV_MODE(musb);
+ musb->xceiv->default_a = 0;
+ musb->xceiv->state = OTG_STATE_B_IDLE;
+ portstate(musb->port1_status &= ~USB_PORT_STAT_POWER);
+ }
+
+ /* NOTE: this must complete power-on within 100 ms. */
+ DBG(2, "VBUS %s (%s)%s, devctl %02x\n",
+ drvvbus ? "on" : "off",
+ otg_state_string(musb),
+ err ? " ERROR" : "",
+ devctl);
+ ret = IRQ_HANDLED;
+ }
+
+ if (musb->int_tx || musb->int_rx || musb->int_usb)
+ ret |= musb_interrupt(musb);
+
+eoi:
+ /* EOI needs to be written for the IRQ to be re-asserted. */
+ if (ret == IRQ_HANDLED || epintr || usbintr) {
+ /* clear level interrupt */
+ lvl_intr = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+ lvl_intr |= AM35XX_USBOTGSS_INT_CLR;
+ omap_ctrl_writel(lvl_intr, AM35XX_CONTROL_LVL_INTR_CLEAR);
+ /* write EOI */
+ musb_writel(reg_base, USB_END_OF_INTR_REG, 0);
+ }
+
+ /* Poll for ID change */
+ if (is_otg_enabled(musb) && musb->xceiv->state == OTG_STATE_B_IDLE)
+ mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
+
+ spin_unlock_irqrestore(&musb->lock, flags);
+
+ return ret;
+}
+
+int musb_platform_set_mode(struct musb *musb, u8 musb_mode)
+{
+ u32 devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
+
+ devconf2 &= ~CONF2_OTGMODE;
+ switch (musb_mode) {
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+ case MUSB_HOST: /* Force VBUS valid, ID = 0 */
+ devconf2 |= CONF2_FORCE_HOST;
+ break;
+#endif
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+ case MUSB_PERIPHERAL: /* Force VBUS valid, ID = 1 */
+ devconf2 |= CONF2_FORCE_DEVICE;
+ break;
+#endif
+#ifdef CONFIG_USB_MUSB_OTG
+ case MUSB_OTG: /* Don't override the VBUS/ID comparators */
+ devconf2 |= CONF2_NO_OVERRIDE;
+ break;
+#endif
+ default:
+ DBG(2, "Trying to set unsupported mode %u\n", musb_mode);
+ }
+
+ omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
+ return 0;
+}
+
+int __init musb_platform_init(struct musb *musb, void *board_data)
+{
+ void __iomem *reg_base = musb->ctrl_base;
+ u32 rev, lvl_intr, sw_reset;
+ int status;
+
+ musb->mregs += USB_MENTOR_CORE_OFFSET;
+
+ clk_enable(musb->clock);
+ DBG(2, "musb->clock=%lud\n", clk_get_rate(musb->clock));
+
+ musb->phy_clock = clk_get(musb->controller, "fck");
+ if (IS_ERR(musb->phy_clock)) {
+ status = PTR_ERR(musb->phy_clock);
+ goto exit0;
+ }
+ clk_enable(musb->phy_clock);
+ DBG(2, "musb->phy_clock=%lud\n", clk_get_rate(musb->phy_clock));
+
+ /* Returns zero if e.g. not clocked */
+ rev = musb_readl(reg_base, USB_REVISION_REG);
+ if (!rev) {
+ status = -ENODEV;
+ goto exit1;
+ }
+
+ usb_nop_xceiv_register();
+ musb->xceiv = otg_get_transceiver();
+ if (!musb->xceiv) {
+ status = -ENODEV;
+ goto exit1;
+ }
+
+ if (is_host_enabled(musb))
+ setup_timer(&otg_workaround, otg_timer, (unsigned long) musb);
+
+ musb->board_set_vbus = am35x_set_vbus;
+
+ /* Global reset */
+ sw_reset = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
+
+ sw_reset |= AM35XX_USBOTGSS_SW_RST;
+ omap_ctrl_writel(sw_reset, AM35XX_CONTROL_IP_SW_RESET);
+
+ sw_reset &= ~AM35XX_USBOTGSS_SW_RST;
+ omap_ctrl_writel(sw_reset, AM35XX_CONTROL_IP_SW_RESET);
+
+ /* Reset the controller */
+ musb_writel(reg_base, USB_CTRL_REG, AM35X_SOFT_RESET_MASK);
+
+ /* Start the on-chip PHY and its PLL. */
+ phy_on();
+
+ msleep(5);
+
+ musb->isr = am35x_interrupt;
+
+ /* clear level interrupt */
+ lvl_intr = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+ lvl_intr |= AM35XX_USBOTGSS_INT_CLR;
+ omap_ctrl_writel(lvl_intr, AM35XX_CONTROL_LVL_INTR_CLEAR);
+ return 0;
+exit1:
+ clk_disable(musb->phy_clock);
+ clk_put(musb->phy_clock);
+exit0:
+ clk_disable(musb->clock);
+ return status;
+}
+
+int musb_platform_exit(struct musb *musb)
+{
+ if (is_host_enabled(musb))
+ del_timer_sync(&otg_workaround);
+
+ phy_off();
+
+ otg_put_transceiver(musb->xceiv);
+ usb_nop_xceiv_unregister();
+
+ clk_disable(musb->clock);
+
+ clk_disable(musb->phy_clock);
+ clk_put(musb->phy_clock);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+void musb_platform_save_context(struct musb *musb,
+ struct musb_context_registers *musb_context)
+{
+ phy_off();
+}
+
+void musb_platform_restore_context(struct musb *musb,
+ struct musb_context_registers *musb_context)
+{
+ phy_on();
+}
+#endif
+
+/* AM35x supports only 32bit read operation */
+void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
+{
+ void __iomem *fifo = hw_ep->fifo;
+ u32 val;
+ int i;
+
+ /* Read for 32bit-aligned destination address */
+ if (likely((0x03 & (unsigned long) dst) == 0) && len >= 4) {
+ readsl(fifo, dst, len >> 2);
+ dst += len & ~0x03;
+ len &= 0x03;
+ }
+ /*
+ * Now read the remaining 1 to 3 byte or complete length if
+ * unaligned address.
+ */
+ if (len > 4) {
+ for (i = 0; i < (len >> 2); i++) {
+ *(u32 *) dst = musb_readl(fifo, 0);
+ dst += 4;
+ }
+ len &= 0x03;
+ }
+ if (len > 0) {
+ val = musb_readl(fifo, 0);
+ memcpy(dst, &val, len);
+ }
+}
diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
index b611420a805..611a9d27436 100644
--- a/drivers/usb/musb/blackfin.c
+++ b/drivers/usb/musb/blackfin.c
@@ -342,8 +342,10 @@ int __init musb_platform_init(struct musb *musb, void *board_data)
usb_nop_xceiv_register();
musb->xceiv = otg_get_transceiver();
- if (!musb->xceiv)
+ if (!musb->xceiv) {
+ gpio_free(musb->config->gpio_vrsel);
return -ENODEV;
+ }
if (ANOMALY_05000346) {
bfin_write_USB_APHY_CALIB(ANOMALY_05000346_value);
@@ -394,8 +396,9 @@ int __init musb_platform_init(struct musb *musb, void *board_data)
int musb_platform_exit(struct musb *musb)
{
-
gpio_free(musb->config->gpio_vrsel);
+ otg_put_transceiver(musb->xceiv);
+ usb_nop_xceiv_unregister();
return 0;
}
diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c
index 5ab5bb89bae..f5a65ff0ac2 100644
--- a/drivers/usb/musb/cppi_dma.c
+++ b/drivers/usb/musb/cppi_dma.c
@@ -1156,7 +1156,7 @@ irqreturn_t cppi_interrupt(int irq, void *dev_id)
struct musb_hw_ep *hw_ep = NULL;
u32 rx, tx;
int i, index;
- unsigned long flags;
+ unsigned long uninitialized_var(flags);
cppi = container_of(musb->dma_controller, struct cppi, controller);
if (cppi->irq)
diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c
new file mode 100644
index 00000000000..84427bebbf6
--- /dev/null
+++ b/drivers/usb/musb/da8xx.c
@@ -0,0 +1,469 @@
+/*
+ * Texas Instruments DA8xx/OMAP-L1x "glue layer"
+ *
+ * Copyright (c) 2008-2009 MontaVista Software, Inc. <source@mvista.com>
+ *
+ * Based on the DaVinci "glue layer" code.
+ * Copyright (C) 2005-2006 by Texas Instruments
+ *
+ * This file is part of the Inventra Controller Driver for Linux.
+ *
+ * The Inventra Controller Driver for Linux is free software; you
+ * can redistribute it and/or modify it under the terms of the GNU
+ * General Public License version 2 as published by the Free Software
+ * Foundation.
+ *
+ * The Inventra Controller Driver for Linux is distributed in
+ * the hope that it will be useful, but WITHOUT ANY WARRANTY;
+ * without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
+ * License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with The Inventra Controller Driver for Linux ; if not,
+ * write to the Free Software Foundation, Inc., 59 Temple Place,
+ * Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <mach/da8xx.h>
+#include <mach/usb.h>
+
+#include "musb_core.h"
+
+/*
+ * DA8XX specific definitions
+ */
+
+/* USB 2.0 OTG module registers */
+#define DA8XX_USB_REVISION_REG 0x00
+#define DA8XX_USB_CTRL_REG 0x04
+#define DA8XX_USB_STAT_REG 0x08
+#define DA8XX_USB_EMULATION_REG 0x0c
+#define DA8XX_USB_MODE_REG 0x10 /* Transparent, CDC, [Generic] RNDIS */
+#define DA8XX_USB_AUTOREQ_REG 0x14
+#define DA8XX_USB_SRP_FIX_TIME_REG 0x18
+#define DA8XX_USB_TEARDOWN_REG 0x1c
+#define DA8XX_USB_INTR_SRC_REG 0x20
+#define DA8XX_USB_INTR_SRC_SET_REG 0x24
+#define DA8XX_USB_INTR_SRC_CLEAR_REG 0x28
+#define DA8XX_USB_INTR_MASK_REG 0x2c
+#define DA8XX_USB_INTR_MASK_SET_REG 0x30
+#define DA8XX_USB_INTR_MASK_CLEAR_REG 0x34
+#define DA8XX_USB_INTR_SRC_MASKED_REG 0x38
+#define DA8XX_USB_END_OF_INTR_REG 0x3c
+#define DA8XX_USB_GENERIC_RNDIS_EP_SIZE_REG(n) (0x50 + (((n) - 1) << 2))
+
+/* Control register bits */
+#define DA8XX_SOFT_RESET_MASK 1
+
+#define DA8XX_USB_TX_EP_MASK 0x1f /* EP0 + 4 Tx EPs */
+#define DA8XX_USB_RX_EP_MASK 0x1e /* 4 Rx EPs */
+
+/* USB interrupt register bits */
+#define DA8XX_INTR_USB_SHIFT 16
+#define DA8XX_INTR_USB_MASK (0x1ff << DA8XX_INTR_USB_SHIFT) /* 8 Mentor */
+ /* interrupts and DRVVBUS interrupt */
+#define DA8XX_INTR_DRVVBUS 0x100
+#define DA8XX_INTR_RX_SHIFT 8
+#define DA8XX_INTR_RX_MASK (DA8XX_USB_RX_EP_MASK << DA8XX_INTR_RX_SHIFT)
+#define DA8XX_INTR_TX_SHIFT 0
+#define DA8XX_INTR_TX_MASK (DA8XX_USB_TX_EP_MASK << DA8XX_INTR_TX_SHIFT)
+
+#define DA8XX_MENTOR_CORE_OFFSET 0x400
+
+#define CFGCHIP2 IO_ADDRESS(DA8XX_SYSCFG0_BASE + DA8XX_CFGCHIP2_REG)
+
+/*
+ * REVISIT (PM): we should be able to keep the PHY in low power mode most
+ * of the time (24 MHz oscillator and PLL off, etc.) by setting POWER.D0
+ * and, when in host mode, autosuspending idle root ports... PHY_PLLON
+ * (overriding SUSPENDM?) then likely needs to stay off.
+ */
+
+static inline void phy_on(void)
+{
+ u32 cfgchip2 = __raw_readl(CFGCHIP2);
+
+ /*
+ * Start the on-chip PHY and its PLL.
+ */
+ cfgchip2 &= ~(CFGCHIP2_RESET | CFGCHIP2_PHYPWRDN | CFGCHIP2_OTGPWRDN);
+ cfgchip2 |= CFGCHIP2_PHY_PLLON;
+ __raw_writel(cfgchip2, CFGCHIP2);
+
+ pr_info("Waiting for USB PHY clock good...\n");
+ while (!(__raw_readl(CFGCHIP2) & CFGCHIP2_PHYCLKGD))
+ cpu_relax();
+}
+
+static inline void phy_off(void)
+{
+ u32 cfgchip2 = __raw_readl(CFGCHIP2);
+
+ /*
+ * Ensure that USB 1.1 reference clock is not being sourced from
+ * USB 2.0 PHY. Otherwise do not power down the PHY.
+ */
+ if (!(cfgchip2 & CFGCHIP2_USB1PHYCLKMUX) &&
+ (cfgchip2 & CFGCHIP2_USB1SUSPENDM)) {
+ pr_warning("USB 1.1 clocked from USB 2.0 PHY -- "
+ "can't power it down\n");
+ return;
+ }
+
+ /*
+ * Power down the on-chip PHY.
+ */
+ cfgchip2 |= CFGCHIP2_PHYPWRDN | CFGCHIP2_OTGPWRDN;
+ __raw_writel(cfgchip2, CFGCHIP2);
+}
+
+/*
+ * Because we don't set CTRL.UINT, it's "important" to:
+ * - not read/write INTRUSB/INTRUSBE (except during
+ * initial setup, as a workaround);
+ * - use INTSET/INTCLR instead.
+ */
+
+/**
+ * musb_platform_enable - enable interrupts
+ */
+void musb_platform_enable(struct musb *musb)
+{
+ void __iomem *reg_base = musb->ctrl_base;
+ u32 mask;
+
+ /* Workaround: setup IRQs through both register sets. */
+ mask = ((musb->epmask & DA8XX_USB_TX_EP_MASK) << DA8XX_INTR_TX_SHIFT) |
+ ((musb->epmask & DA8XX_USB_RX_EP_MASK) << DA8XX_INTR_RX_SHIFT) |
+ DA8XX_INTR_USB_MASK;
+ musb_writel(reg_base, DA8XX_USB_INTR_MASK_SET_REG, mask);
+
+ /* Force the DRVVBUS IRQ so we can start polling for ID change. */
+ if (is_otg_enabled(musb))
+ musb_writel(reg_base, DA8XX_USB_INTR_SRC_SET_REG,
+ DA8XX_INTR_DRVVBUS << DA8XX_INTR_USB_SHIFT);
+}
+
+/**
+ * musb_platform_disable - disable HDRC and flush interrupts
+ */
+void musb_platform_disable(struct musb *musb)
+{
+ void __iomem *reg_base = musb->ctrl_base;
+
+ musb_writel(reg_base, DA8XX_USB_INTR_MASK_CLEAR_REG,
+ DA8XX_INTR_USB_MASK |
+ DA8XX_INTR_TX_MASK | DA8XX_INTR_RX_MASK);
+ musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
+ musb_writel(reg_base, DA8XX_USB_END_OF_INTR_REG, 0);
+}
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+#define portstate(stmt) stmt
+#else
+#define portstate(stmt)
+#endif
+
+static void da8xx_set_vbus(struct musb *musb, int is_on)
+{
+ WARN_ON(is_on && is_peripheral_active(musb));
+}
+
+#define POLL_SECONDS 2
+
+static struct timer_list otg_workaround;
+
+static void otg_timer(unsigned long _musb)
+{
+ struct musb *musb = (void *)_musb;
+ void __iomem *mregs = musb->mregs;
+ u8 devctl;
+ unsigned long flags;
+
+ /*
+ * We poll because DaVinci's won't expose several OTG-critical
+ * status change events (from the transceiver) otherwise.
+ */
+ devctl = musb_readb(mregs, MUSB_DEVCTL);
+ DBG(7, "Poll devctl %02x (%s)\n", devctl, otg_state_string(musb));
+
+ spin_lock_irqsave(&musb->lock, flags);
+ switch (musb->xceiv->state) {
+ case OTG_STATE_A_WAIT_BCON:
+ devctl &= ~MUSB_DEVCTL_SESSION;
+ musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+
+ devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+ if (devctl & MUSB_DEVCTL_BDEVICE) {
+ musb->xceiv->state = OTG_STATE_B_IDLE;
+ MUSB_DEV_MODE(musb);
+ } else {
+ musb->xceiv->state = OTG_STATE_A_IDLE;
+ MUSB_HST_MODE(musb);
+ }
+ break;
+ case OTG_STATE_A_WAIT_VFALL:
+ /*
+ * Wait till VBUS falls below SessionEnd (~0.2 V); the 1.3
+ * RTL seems to mis-handle session "start" otherwise (or in
+ * our case "recover"), in routine "VBUS was valid by the time
+ * VBUSERR got reported during enumeration" cases.
+ */
+ if (devctl & MUSB_DEVCTL_VBUS) {
+ mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
+ break;
+ }
+ musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
+ musb_writel(musb->ctrl_base, DA8XX_USB_INTR_SRC_SET_REG,
+ MUSB_INTR_VBUSERROR << DA8XX_INTR_USB_SHIFT);
+ break;
+ case OTG_STATE_B_IDLE:
+ if (!is_peripheral_enabled(musb))
+ break;
+
+ /*
+ * There's no ID-changed IRQ, so we have no good way to tell
+ * when to switch to the A-Default state machine (by setting
+ * the DEVCTL.Session bit).
+ *
+ * Workaround: whenever we're in B_IDLE, try setting the
+ * session flag every few seconds. If it works, ID was
+ * grounded and we're now in the A-Default state machine.
+ *
+ * NOTE: setting the session flag is _supposed_ to trigger
+ * SRP but clearly it doesn't.
+ */
+ musb_writeb(mregs, MUSB_DEVCTL, devctl | MUSB_DEVCTL_SESSION);
+ devctl = musb_readb(mregs, MUSB_DEVCTL);
+ if (devctl & MUSB_DEVCTL_BDEVICE)
+ mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
+ else
+ musb->xceiv->state = OTG_STATE_A_IDLE;
+ break;
+ default:
+ break;
+ }
+ spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
+{
+ static unsigned long last_timer;
+
+ if (!is_otg_enabled(musb))
+ return;
+
+ if (timeout == 0)
+ timeout = jiffies + msecs_to_jiffies(3);
+
+ /* Never idle if active, or when VBUS timeout is not set as host */
+ if (musb->is_active || (musb->a_wait_bcon == 0 &&
+ musb->xceiv->state == OTG_STATE_A_WAIT_BCON)) {
+ DBG(4, "%s active, deleting timer\n", otg_state_string(musb));
+ del_timer(&otg_workaround);
+ last_timer = jiffies;
+ return;
+ }
+
+ if (time_after(last_timer, timeout) && timer_pending(&otg_workaround)) {
+ DBG(4, "Longer idle timer already pending, ignoring...\n");
+ return;
+ }
+ last_timer = timeout;
+
+ DBG(4, "%s inactive, starting idle timer for %u ms\n",
+ otg_state_string(musb), jiffies_to_msecs(timeout - jiffies));
+ mod_timer(&otg_workaround, timeout);
+}
+
+static irqreturn_t da8xx_interrupt(int irq, void *hci)
+{
+ struct musb *musb = hci;
+ void __iomem *reg_base = musb->ctrl_base;
+ unsigned long flags;
+ irqreturn_t ret = IRQ_NONE;
+ u32 status;
+
+ spin_lock_irqsave(&musb->lock, flags);
+
+ /*
+ * NOTE: DA8XX shadows the Mentor IRQs. Don't manage them through
+ * the Mentor registers (except for setup), use the TI ones and EOI.
+ */
+
+ /* Acknowledge and handle non-CPPI interrupts */
+ status = musb_readl(reg_base, DA8XX_USB_INTR_SRC_MASKED_REG);
+ if (!status)
+ goto eoi;
+
+ musb_writel(reg_base, DA8XX_USB_INTR_SRC_CLEAR_REG, status);
+ DBG(4, "USB IRQ %08x\n", status);
+
+ musb->int_rx = (status & DA8XX_INTR_RX_MASK) >> DA8XX_INTR_RX_SHIFT;
+ musb->int_tx = (status & DA8XX_INTR_TX_MASK) >> DA8XX_INTR_TX_SHIFT;
+ musb->int_usb = (status & DA8XX_INTR_USB_MASK) >> DA8XX_INTR_USB_SHIFT;
+
+ /*
+ * DRVVBUS IRQs are the only proxy we have (a very poor one!) for
+ * DA8xx's missing ID change IRQ. We need an ID change IRQ to
+ * switch appropriately between halves of the OTG state machine.
+ * Managing DEVCTL.Session per Mentor docs requires that we know its
+ * value but DEVCTL.BDevice is invalid without DEVCTL.Session set.
+ * Also, DRVVBUS pulses for SRP (but not at 5 V)...
+ */
+ if (status & (DA8XX_INTR_DRVVBUS << DA8XX_INTR_USB_SHIFT)) {
+ int drvvbus = musb_readl(reg_base, DA8XX_USB_STAT_REG);
+ void __iomem *mregs = musb->mregs;
+ u8 devctl = musb_readb(mregs, MUSB_DEVCTL);
+ int err;
+
+ err = is_host_enabled(musb) && (musb->int_usb &
+ MUSB_INTR_VBUSERROR);
+ if (err) {
+ /*
+ * The Mentor core doesn't debounce VBUS as needed
+ * to cope with device connect current spikes. This
+ * means it's not uncommon for bus-powered devices
+ * to get VBUS errors during enumeration.
+ *
+ * This is a workaround, but newer RTL from Mentor
+ * seems to allow a better one: "re"-starting sessions
+ * without waiting for VBUS to stop registering in
+ * devctl.
+ */
+ musb->int_usb &= ~MUSB_INTR_VBUSERROR;
+ musb->xceiv->state = OTG_STATE_A_WAIT_VFALL;
+ mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
+ WARNING("VBUS error workaround (delay coming)\n");
+ } else if (is_host_enabled(musb) && drvvbus) {
+ MUSB_HST_MODE(musb);
+ musb->xceiv->default_a = 1;
+ musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
+ portstate(musb->port1_status |= USB_PORT_STAT_POWER);
+ del_timer(&otg_workaround);
+ } else {
+ musb->is_active = 0;
+ MUSB_DEV_MODE(musb);
+ musb->xceiv->default_a = 0;
+ musb->xceiv->state = OTG_STATE_B_IDLE;
+ portstate(musb->port1_status &= ~USB_PORT_STAT_POWER);
+ }
+
+ DBG(2, "VBUS %s (%s)%s, devctl %02x\n",
+ drvvbus ? "on" : "off",
+ otg_state_string(musb),
+ err ? " ERROR" : "",
+ devctl);
+ ret = IRQ_HANDLED;
+ }
+
+ if (musb->int_tx || musb->int_rx || musb->int_usb)
+ ret |= musb_interrupt(musb);
+
+ eoi:
+ /* EOI needs to be written for the IRQ to be re-asserted. */
+ if (ret == IRQ_HANDLED || status)
+ musb_writel(reg_base, DA8XX_USB_END_OF_INTR_REG, 0);
+
+ /* Poll for ID change */
+ if (is_otg_enabled(musb) && musb->xceiv->state == OTG_STATE_B_IDLE)
+ mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
+
+ spin_unlock_irqrestore(&musb->lock, flags);
+
+ return ret;
+}
+
+int musb_platform_set_mode(struct musb *musb, u8 musb_mode)
+{
+ u32 cfgchip2 = __raw_readl(CFGCHIP2);
+
+ cfgchip2 &= ~CFGCHIP2_OTGMODE;
+ switch (musb_mode) {
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+ case MUSB_HOST: /* Force VBUS valid, ID = 0 */
+ cfgchip2 |= CFGCHIP2_FORCE_HOST;
+ break;
+#endif
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+ case MUSB_PERIPHERAL: /* Force VBUS valid, ID = 1 */
+ cfgchip2 |= CFGCHIP2_FORCE_DEVICE;
+ break;
+#endif
+#ifdef CONFIG_USB_MUSB_OTG
+ case MUSB_OTG: /* Don't override the VBUS/ID comparators */
+ cfgchip2 |= CFGCHIP2_NO_OVERRIDE;
+ break;
+#endif
+ default:
+ DBG(2, "Trying to set unsupported mode %u\n", musb_mode);
+ }
+
+ __raw_writel(cfgchip2, CFGCHIP2);
+ return 0;
+}
+
+int __init musb_platform_init(struct musb *musb, void *board_data)
+{
+ void __iomem *reg_base = musb->ctrl_base;
+ u32 rev;
+
+ musb->mregs += DA8XX_MENTOR_CORE_OFFSET;
+
+ clk_enable(musb->clock);
+
+ /* Returns zero if e.g. not clocked */
+ rev = musb_readl(reg_base, DA8XX_USB_REVISION_REG);
+ if (!rev)
+ goto fail;
+
+ usb_nop_xceiv_register();
+ musb->xceiv = otg_get_transceiver();
+ if (!musb->xceiv)
+ goto fail;
+
+ if (is_host_enabled(musb))
+ setup_timer(&otg_workaround, otg_timer, (unsigned long)musb);
+
+ musb->board_set_vbus = da8xx_set_vbus;
+
+ /* Reset the controller */
+ musb_writel(reg_base, DA8XX_USB_CTRL_REG, DA8XX_SOFT_RESET_MASK);
+
+ /* Start the on-chip PHY and its PLL. */
+ phy_on();
+
+ msleep(5);
+
+ /* NOTE: IRQs are in mixed mode, not bypass to pure MUSB */
+ pr_debug("DA8xx OTG revision %08x, PHY %03x, control %02x\n",
+ rev, __raw_readl(CFGCHIP2),
+ musb_readb(reg_base, DA8XX_USB_CTRL_REG));
+
+ musb->isr = da8xx_interrupt;
+ return 0;
+fail:
+ clk_disable(musb->clock);
+ return -ENODEV;
+}
+
+int musb_platform_exit(struct musb *musb)
+{
+ if (is_host_enabled(musb))
+ del_timer_sync(&otg_workaround);
+
+ phy_off();
+
+ otg_put_transceiver(musb->xceiv);
+ usb_nop_xceiv_unregister();
+
+ clk_disable(musb->clock);
+
+ return 0;
+}
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 57624361c1d..6e67629f50c 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -446,6 +446,7 @@ int __init musb_platform_init(struct musb *musb, void *board_data)
fail:
clk_disable(musb->clock);
+ otg_put_transceiver(musb->xceiv);
usb_nop_xceiv_unregister();
return -ENODEV;
}
@@ -496,6 +497,7 @@ int musb_platform_exit(struct musb *musb)
clk_disable(musb->clock);
+ otg_put_transceiver(musb->xceiv);
usb_nop_xceiv_unregister();
return 0;
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 540c766c4f8..c9f9024c551 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -272,6 +272,7 @@ void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src)
}
}
+#if !defined(CONFIG_USB_MUSB_AM35X)
/*
* Unload an endpoint's FIFO
*/
@@ -309,6 +310,7 @@ void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
readsb(fifo, dst, len);
}
}
+#endif
#endif /* normal PIO */
@@ -550,6 +552,11 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
if (int_usb & MUSB_INTR_SESSREQ) {
void __iomem *mbase = musb->mregs;
+ if (devctl & MUSB_DEVCTL_BDEVICE) {
+ DBG(3, "SessReq while on B state\n");
+ return IRQ_HANDLED;
+ }
+
DBG(1, "SESSION_REQUEST (%s)\n", otg_state_string(musb));
/* IRQ arrives from ID pin sense or (later, if VBUS power
@@ -1921,10 +1928,6 @@ static void musb_free(struct musb *musb)
dma_controller_destroy(c);
}
-#ifdef CONFIG_USB_MUSB_OTG
- put_device(musb->xceiv->dev);
-#endif
-
#ifdef CONFIG_USB_MUSB_HDRC_HCD
usb_put_hcd(musb_to_hcd(musb));
#else
@@ -2266,6 +2269,7 @@ void musb_save_context(struct musb *musb)
{
int i;
void __iomem *musb_base = musb->mregs;
+ void __iomem *epio;
if (is_host_enabled(musb)) {
musb_context.frame = musb_readw(musb_base, MUSB_FRAME);
@@ -2279,16 +2283,16 @@ void musb_save_context(struct musb *musb)
musb_context.index = musb_readb(musb_base, MUSB_INDEX);
musb_context.devctl = musb_readb(musb_base, MUSB_DEVCTL);
- for (i = 0; i < MUSB_C_NUM_EPS; ++i) {
- musb_writeb(musb_base, MUSB_INDEX, i);
+ for (i = 0; i < musb->config->num_eps; ++i) {
+ epio = musb->endpoints[i].regs;
musb_context.index_regs[i].txmaxp =
- musb_readw(musb_base, 0x10 + MUSB_TXMAXP);
+ musb_readw(epio, MUSB_TXMAXP);
musb_context.index_regs[i].txcsr =
- musb_readw(musb_base, 0x10 + MUSB_TXCSR);
+ musb_readw(epio, MUSB_TXCSR);
musb_context.index_regs[i].rxmaxp =
- musb_readw(musb_base, 0x10 + MUSB_RXMAXP);
+ musb_readw(epio, MUSB_RXMAXP);
musb_context.index_regs[i].rxcsr =
- musb_readw(musb_base, 0x10 + MUSB_RXCSR);
+ musb_readw(epio, MUSB_RXCSR);
if (musb->dyn_fifo) {
musb_context.index_regs[i].txfifoadd =
@@ -2302,13 +2306,13 @@ void musb_save_context(struct musb *musb)
}
if (is_host_enabled(musb)) {
musb_context.index_regs[i].txtype =
- musb_readb(musb_base, 0x10 + MUSB_TXTYPE);
+ musb_readb(epio, MUSB_TXTYPE);
musb_context.index_regs[i].txinterval =
- musb_readb(musb_base, 0x10 + MUSB_TXINTERVAL);
+ musb_readb(epio, MUSB_TXINTERVAL);
musb_context.index_regs[i].rxtype =
- musb_readb(musb_base, 0x10 + MUSB_RXTYPE);
+ musb_readb(epio, MUSB_RXTYPE);
musb_context.index_regs[i].rxinterval =
- musb_readb(musb_base, 0x10 + MUSB_RXINTERVAL);
+ musb_readb(epio, MUSB_RXINTERVAL);
musb_context.index_regs[i].txfunaddr =
musb_read_txfunaddr(musb_base, i);
@@ -2326,8 +2330,6 @@ void musb_save_context(struct musb *musb)
}
}
- musb_writeb(musb_base, MUSB_INDEX, musb_context.index);
-
musb_platform_save_context(musb, &musb_context);
}
@@ -2336,6 +2338,7 @@ void musb_restore_context(struct musb *musb)
int i;
void __iomem *musb_base = musb->mregs;
void __iomem *ep_target_regs;
+ void __iomem *epio;
musb_platform_restore_context(musb, &musb_context);
@@ -2350,15 +2353,15 @@ void musb_restore_context(struct musb *musb)
musb_writeb(musb_base, MUSB_INTRUSBE, musb_context.intrusbe);
musb_writeb(musb_base, MUSB_DEVCTL, musb_context.devctl);
- for (i = 0; i < MUSB_C_NUM_EPS; ++i) {
- musb_writeb(musb_base, MUSB_INDEX, i);
- musb_writew(musb_base, 0x10 + MUSB_TXMAXP,
+ for (i = 0; i < musb->config->num_eps; ++i) {
+ epio = musb->endpoints[i].regs;
+ musb_writew(epio, MUSB_TXMAXP,
musb_context.index_regs[i].txmaxp);
- musb_writew(musb_base, 0x10 + MUSB_TXCSR,
+ musb_writew(epio, MUSB_TXCSR,
musb_context.index_regs[i].txcsr);
- musb_writew(musb_base, 0x10 + MUSB_RXMAXP,
+ musb_writew(epio, MUSB_RXMAXP,
musb_context.index_regs[i].rxmaxp);
- musb_writew(musb_base, 0x10 + MUSB_RXCSR,
+ musb_writew(epio, MUSB_RXCSR,
musb_context.index_regs[i].rxcsr);
if (musb->dyn_fifo) {
@@ -2373,13 +2376,13 @@ void musb_restore_context(struct musb *musb)
}
if (is_host_enabled(musb)) {
- musb_writeb(musb_base, 0x10 + MUSB_TXTYPE,
+ musb_writeb(epio, MUSB_TXTYPE,
musb_context.index_regs[i].txtype);
- musb_writeb(musb_base, 0x10 + MUSB_TXINTERVAL,
+ musb_writeb(epio, MUSB_TXINTERVAL,
musb_context.index_regs[i].txinterval);
- musb_writeb(musb_base, 0x10 + MUSB_RXTYPE,
+ musb_writeb(epio, MUSB_RXTYPE,
musb_context.index_regs[i].rxtype);
- musb_writeb(musb_base, 0x10 + MUSB_RXINTERVAL,
+ musb_writeb(epio, MUSB_RXINTERVAL,
musb_context.index_regs[i].rxinterval);
musb_write_txfunaddr(musb_base, i,
@@ -2400,8 +2403,6 @@ void musb_restore_context(struct musb *musb)
musb_context.index_regs[i].rxhubport);
}
}
-
- musb_writeb(musb_base, MUSB_INDEX, musb_context.index);
}
static int musb_suspend(struct device *dev)
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 91d67794e35..69797e5b46a 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -330,6 +330,7 @@ struct musb {
/* device lock */
spinlock_t lock;
struct clk *clock;
+ struct clk *phy_clock;
irqreturn_t (*isr)(int, void *);
struct work_struct irq_work;
u16 hwvers;
@@ -599,6 +600,7 @@ extern void musb_hnp_stop(struct musb *musb);
extern int musb_platform_set_mode(struct musb *musb, u8 musb_mode);
#if defined(CONFIG_USB_TUSB6010) || defined(CONFIG_BLACKFIN) || \
+ defined(CONFIG_ARCH_DAVINCI_DA8XX) || \
defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \
defined(CONFIG_ARCH_OMAP4)
extern void musb_platform_try_idle(struct musb *musb, unsigned long timeout);
diff --git a/drivers/usb/musb/musb_debug.h b/drivers/usb/musb/musb_debug.h
index d73afdbde3e..94f6973cf8f 100644
--- a/drivers/usb/musb/musb_debug.h
+++ b/drivers/usb/musb/musb_debug.h
@@ -42,11 +42,10 @@
#define INFO(fmt, args...) yprintk(KERN_INFO, fmt, ## args)
#define ERR(fmt, args...) yprintk(KERN_ERR, fmt, ## args)
-#define xprintk(level, facility, format, args...) do { \
- if (_dbg_level(level)) { \
- printk(facility "%s %d: " format , \
- __func__, __LINE__ , ## args); \
- } } while (0)
+#define DBG(level, format, args...) do { \
+ if (_dbg_level(level)) \
+ pr_debug("%s %d: " format, __func__, __LINE__, ## args); \
+ } while (0)
extern unsigned musb_debug;
@@ -55,8 +54,6 @@ static inline int _dbg_level(unsigned l)
return musb_debug >= l;
}
-#define DBG(level, fmt, args...) xprintk(level, KERN_DEBUG, fmt, ## args)
-
extern const char *otg_state_string(struct musb *);
#ifdef CONFIG_DEBUG_FS
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index d065e23f123..5d815049cba 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -337,13 +337,15 @@ static void txstate(struct musb *musb, struct musb_request *req)
csr |= (MUSB_TXCSR_DMAENAB |
MUSB_TXCSR_MODE);
/* against programming guide */
- } else
- csr |= (MUSB_TXCSR_AUTOSET
- | MUSB_TXCSR_DMAENAB
+ } else {
+ csr |= (MUSB_TXCSR_DMAENAB
| MUSB_TXCSR_DMAMODE
| MUSB_TXCSR_MODE);
-
+ if (!musb_ep->hb_mult)
+ csr |= MUSB_TXCSR_AUTOSET;
+ }
csr &= ~MUSB_TXCSR_P_UNDERRUN;
+
musb_writew(epio, MUSB_TXCSR, csr);
}
}
@@ -475,40 +477,39 @@ void musb_g_tx(struct musb *musb, u8 epnum)
epnum, csr, musb_ep->dma->actual_len, request);
}
- if (is_dma || request->actual == request->length) {
- /*
- * First, maybe a terminating short packet. Some DMA
- * engines might handle this by themselves.
- */
- if ((request->zero && request->length
- && request->length % musb_ep->packet_sz == 0)
+ /*
+ * First, maybe a terminating short packet. Some DMA
+ * engines might handle this by themselves.
+ */
+ if ((request->zero && request->length
+ && (request->length % musb_ep->packet_sz == 0)
+ && (request->actual == request->length))
#ifdef CONFIG_USB_INVENTRA_DMA
- || (is_dma && (!dma->desired_mode ||
- (request->actual &
- (musb_ep->packet_sz - 1))))
+ || (is_dma && (!dma->desired_mode ||
+ (request->actual &
+ (musb_ep->packet_sz - 1))))
#endif
- ) {
- /*
- * On DMA completion, FIFO may not be
- * available yet...
- */
- if (csr & MUSB_TXCSR_TXPKTRDY)
- return;
+ ) {
+ /*
+ * On DMA completion, FIFO may not be
+ * available yet...
+ */
+ if (csr & MUSB_TXCSR_TXPKTRDY)
+ return;
- DBG(4, "sending zero pkt\n");
- musb_writew(epio, MUSB_TXCSR, MUSB_TXCSR_MODE
- | MUSB_TXCSR_TXPKTRDY);
- request->zero = 0;
- }
+ DBG(4, "sending zero pkt\n");
+ musb_writew(epio, MUSB_TXCSR, MUSB_TXCSR_MODE
+ | MUSB_TXCSR_TXPKTRDY);
+ request->zero = 0;
+ }
- if (request->actual == request->length) {
- musb_g_giveback(musb_ep, request, 0);
- request = musb_ep->desc ? next_request(musb_ep) : NULL;
- if (!request) {
- DBG(4, "%s idle now\n",
- musb_ep->end_point.name);
- return;
- }
+ if (request->actual == request->length) {
+ musb_g_giveback(musb_ep, request, 0);
+ request = musb_ep->desc ? next_request(musb_ep) : NULL;
+ if (!request) {
+ DBG(4, "%s idle now\n",
+ musb_ep->end_point.name);
+ return;
}
}
@@ -643,7 +644,9 @@ static void rxstate(struct musb *musb, struct musb_request *req)
*/
csr |= MUSB_RXCSR_DMAENAB;
- csr |= MUSB_RXCSR_AUTOCLEAR;
+ if (!musb_ep->hb_mult &&
+ musb_ep->hw_ep->rx_double_buffered)
+ csr |= MUSB_RXCSR_AUTOCLEAR;
#ifdef USE_MODE1
/* csr |= MUSB_RXCSR_DMAMODE; */
@@ -772,7 +775,7 @@ void musb_g_rx(struct musb *musb, u8 epnum)
musb_writew(epio, MUSB_RXCSR, csr);
DBG(3, "%s iso overrun on %p\n", musb_ep->name, request);
- if (request && request->status == -EINPROGRESS)
+ if (request->status == -EINPROGRESS)
request->status = -EOVERFLOW;
}
if (csr & MUSB_RXCSR_INCOMPRX) {
@@ -825,14 +828,8 @@ void musb_g_rx(struct musb *musb, u8 epnum)
return;
}
- /* analyze request if the ep is hot */
- if (request)
- rxstate(musb, to_musb_request(request));
- else
- DBG(3, "packet waiting for %s%s request\n",
- musb_ep->desc ? "" : "inactive ",
- musb_ep->end_point.name);
- return;
+ /* Analyze request */
+ rxstate(musb, to_musb_request(request));
}
/* ------------------------------------------------------------ */
@@ -875,9 +872,25 @@ static int musb_gadget_enable(struct usb_ep *ep,
/* REVISIT this rules out high bandwidth periodic transfers */
tmp = le16_to_cpu(desc->wMaxPacketSize);
- if (tmp & ~0x07ff)
- goto fail;
- musb_ep->packet_sz = tmp;
+ if (tmp & ~0x07ff) {
+ int ok;
+
+ if (usb_endpoint_dir_in(desc))
+ ok = musb->hb_iso_tx;
+ else
+ ok = musb->hb_iso_rx;
+
+ if (!ok) {
+ DBG(4, "%s: not support ISO high bandwidth\n", __func__);
+ goto fail;
+ }
+ musb_ep->hb_mult = (tmp >> 11) & 3;
+ } else {
+ musb_ep->hb_mult = 0;
+ }
+
+ musb_ep->packet_sz = tmp & 0x7ff;
+ tmp = musb_ep->packet_sz * (musb_ep->hb_mult + 1);
/* enable the interrupts for the endpoint, set the endpoint
* packet size (or fail), set the mode, clear the fifo
@@ -890,8 +903,11 @@ static int musb_gadget_enable(struct usb_ep *ep,
musb_ep->is_in = 1;
if (!musb_ep->is_in)
goto fail;
- if (tmp > hw_ep->max_packet_sz_tx)
+
+ if (tmp > hw_ep->max_packet_sz_tx) {
+ DBG(4, "%s: packet size beyond hw fifo size\n", __func__);
goto fail;
+ }
int_txe |= (1 << epnum);
musb_writew(mbase, MUSB_INTRTXE, int_txe);
@@ -906,7 +922,7 @@ static int musb_gadget_enable(struct usb_ep *ep,
if (musb->hwvers < MUSB_HWVERS_2000)
musb_writew(regs, MUSB_TXMAXP, hw_ep->max_packet_sz_tx);
else
- musb_writew(regs, MUSB_TXMAXP, tmp);
+ musb_writew(regs, MUSB_TXMAXP, musb_ep->packet_sz | (musb_ep->hb_mult << 11));
csr = MUSB_TXCSR_MODE | MUSB_TXCSR_CLRDATATOG;
if (musb_readw(regs, MUSB_TXCSR)
@@ -927,8 +943,11 @@ static int musb_gadget_enable(struct usb_ep *ep,
musb_ep->is_in = 0;
if (musb_ep->is_in)
goto fail;
- if (tmp > hw_ep->max_packet_sz_rx)
+
+ if (tmp > hw_ep->max_packet_sz_rx) {
+ DBG(4, "%s: packet size beyond hw fifo size\n", __func__);
goto fail;
+ }
int_rxe |= (1 << epnum);
musb_writew(mbase, MUSB_INTRRXE, int_rxe);
@@ -942,7 +961,7 @@ static int musb_gadget_enable(struct usb_ep *ep,
if (musb->hwvers < MUSB_HWVERS_2000)
musb_writew(regs, MUSB_RXMAXP, hw_ep->max_packet_sz_rx);
else
- musb_writew(regs, MUSB_RXMAXP, tmp);
+ musb_writew(regs, MUSB_RXMAXP, musb_ep->packet_sz | (musb_ep->hb_mult << 11));
/* force shared fifo to OUT-only mode */
if (hw_ep->is_shared_fifo) {
@@ -1699,9 +1718,11 @@ void musb_gadget_cleanup(struct musb *musb)
* -ENOMEM no memeory to perform the operation
*
* @param driver the gadget driver
+ * @param bind the driver's bind function
* @return <0 if error, 0 if everything is fine
*/
-int usb_gadget_register_driver(struct usb_gadget_driver *driver)
+int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
+ int (*bind)(struct usb_gadget *))
{
int retval;
unsigned long flags;
@@ -1709,8 +1730,7 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver)
if (!driver
|| driver->speed != USB_SPEED_HIGH
- || !driver->bind
- || !driver->setup)
+ || !bind || !driver->setup)
return -EINVAL;
/* driver must be initialized to support peripheral mode */
@@ -1738,7 +1758,7 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver)
spin_unlock_irqrestore(&musb->lock, flags);
if (retval == 0) {
- retval = driver->bind(&musb->g);
+ retval = bind(&musb->g);
if (retval != 0) {
DBG(3, "bind to driver %s failed --> %d\n",
driver->driver.name, retval);
@@ -1786,7 +1806,7 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver)
return retval;
}
-EXPORT_SYMBOL(usb_gadget_register_driver);
+EXPORT_SYMBOL(usb_gadget_probe_driver);
static void stop_activity(struct musb *musb, struct usb_gadget_driver *driver)
{
diff --git a/drivers/usb/musb/musb_gadget.h b/drivers/usb/musb/musb_gadget.h
index 572b1da7f2d..dec8dc00819 100644
--- a/drivers/usb/musb/musb_gadget.h
+++ b/drivers/usb/musb/musb_gadget.h
@@ -79,6 +79,8 @@ struct musb_ep {
/* true if lock must be dropped but req_list may not be advanced */
u8 busy;
+
+ u8 hb_mult;
};
static inline struct musb_ep *to_musb_ep(struct usb_ep *ep)
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 9e65c47cc98..4d5bcb4e14d 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -41,6 +41,7 @@
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/list.h>
+#include <linux/dma-mapping.h>
#include "musb_core.h"
#include "musb_host.h"
@@ -1119,6 +1120,7 @@ void musb_host_tx(struct musb *musb, u8 epnum)
u32 status = 0;
void __iomem *mbase = musb->mregs;
struct dma_channel *dma;
+ bool transfer_pending = false;
musb_ep_select(mbase, epnum);
tx_csr = musb_readw(epio, MUSB_TXCSR);
@@ -1279,7 +1281,7 @@ void musb_host_tx(struct musb *musb, u8 epnum)
offset = d->offset;
length = d->length;
}
- } else if (dma) {
+ } else if (dma && urb->transfer_buffer_length == qh->offset) {
done = true;
} else {
/* see if we need to send more data, or ZLP */
@@ -1292,6 +1294,7 @@ void musb_host_tx(struct musb *musb, u8 epnum)
if (!done) {
offset = qh->offset;
length = urb->transfer_buffer_length - offset;
+ transfer_pending = true;
}
}
}
@@ -1311,7 +1314,7 @@ void musb_host_tx(struct musb *musb, u8 epnum)
urb->actual_length = qh->offset;
musb_advance_schedule(musb, urb, hw_ep, USB_DIR_OUT);
return;
- } else if (usb_pipeisoc(pipe) && dma) {
+ } else if ((usb_pipeisoc(pipe) || transfer_pending) && dma) {
if (musb_tx_dma_program(musb->dma_controller, hw_ep, qh, urb,
offset, length)) {
if (is_cppi_enabled() || tusb_dma_omap())
@@ -1332,6 +1335,8 @@ void musb_host_tx(struct musb *musb, u8 epnum)
*/
if (length > qh->maxpacket)
length = qh->maxpacket;
+ /* Unmap the buffer so that CPU can use it */
+ unmap_urb_for_dma(musb_to_hcd(musb), urb);
musb_write_fifo(hw_ep, length, urb->transfer_buffer + offset);
qh->segsize = length;
@@ -1752,6 +1757,8 @@ void musb_host_rx(struct musb *musb, u8 epnum)
#endif /* Mentor DMA */
if (!dma) {
+ /* Unmap the buffer so that CPU can use it */
+ unmap_urb_for_dma(musb_to_hcd(musb), urb);
done = musb_host_packet_rx(musb, urb,
epnum, iso_err);
DBG(6, "read %spacket\n", done ? "last " : "");
diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c
index 6dc107f2524..6f771af5cbd 100644
--- a/drivers/usb/musb/musbhsdma.c
+++ b/drivers/usb/musb/musbhsdma.c
@@ -91,7 +91,7 @@ static struct dma_channel *dma_channel_allocate(struct dma_controller *c,
channel = &(musb_channel->channel);
channel->private_data = musb_channel;
channel->status = MUSB_DMA_STATUS_FREE;
- channel->max_len = 0x10000;
+ channel->max_len = 0x100000;
/* Tx => mode 1; Rx => mode 0 */
channel->desired_mode = transmit;
channel->actual_len = 0;
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 2111a241dd0..ed618bde1ee 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -320,5 +320,6 @@ int musb_platform_exit(struct musb *musb)
musb_platform_suspend(musb);
+ otg_put_transceiver(musb->xceiv);
return 0;
}
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index 3c48e77a0aa..bde40efc704 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -1152,6 +1152,8 @@ done:
if (ret < 0) {
if (sync)
iounmap(sync);
+
+ otg_put_transceiver(musb->xceiv);
usb_nop_xceiv_unregister();
}
return ret;
@@ -1166,6 +1168,8 @@ int musb_platform_exit(struct musb *musb)
musb->board_set_power(0);
iounmap(musb->sync_va);
+
+ otg_put_transceiver(musb->xceiv);
usb_nop_xceiv_unregister();
return 0;
}
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-11-30 21:45:36 +0000