diff options
Diffstat (limited to 'drivers/usb/musb/musb_host.c')
| -rw-r--r-- | drivers/usb/musb/musb_host.c | 24 |
1 files changed, 24 insertions, 0 deletions
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 74c4c3698f1..c3fdd6d69f5 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -1771,6 +1771,9 @@ static int musb_schedule( int best_end, epnum; struct musb_hw_ep *hw_ep = NULL; struct list_head *head = NULL; + u8 toggle; + u8 txtype; + struct urb *urb = next_urb(qh); /* use fixed hardware for control and bulk */ if (qh->type == USB_ENDPOINT_XFER_CONTROL) { @@ -1809,6 +1812,27 @@ static int musb_schedule( diff -= (qh->maxpacket * qh->hb_mult); if (diff >= 0 && best_diff > diff) { + + /* + * Mentor controller has a bug in that if we schedule + * a BULK Tx transfer on an endpoint that had earlier + * handled ISOC then the BULK transfer has to start on + * a zero toggle. If the BULK transfer starts on a 1 + * toggle then this transfer will fail as the mentor + * controller starts the Bulk transfer on a 0 toggle + * irrespective of the programming of the toggle bits + * in the TXCSR register. Check for this condition + * while allocating the EP for a Tx Bulk transfer. If + * so skip this EP. + */ + hw_ep = musb->endpoints + epnum; + toggle = usb_gettoggle(urb->dev, qh->epnum, !is_in); + txtype = (musb_readb(hw_ep->regs, MUSB_TXTYPE) + >> 4) & 0x3; + if (!is_in && (qh->type == USB_ENDPOINT_XFER_BULK) && + toggle && (txtype == USB_ENDPOINT_XFER_ISOC)) + continue; + best_diff = diff; best_end = epnum; } |