diff options
Diffstat (limited to 'drivers/usb/musb/musb_core.c')
| -rw-r--r-- | drivers/usb/musb/musb_core.c | 2261 |
1 files changed, 2261 insertions, 0 deletions
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c new file mode 100644 index 00000000000..d68ec6daf33 --- /dev/null +++ b/drivers/usb/musb/musb_core.c @@ -0,0 +1,2261 @@ +/* + * MUSB OTG driver core code + * + * Copyright 2005 Mentor Graphics Corporation + * Copyright (C) 2005-2006 by Texas Instruments + * Copyright (C) 2006-2007 Nokia Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +/* + * Inventra (Multipoint) Dual-Role Controller Driver for Linux. + * + * This consists of a Host Controller Driver (HCD) and a peripheral + * controller driver implementing the "Gadget" API; OTG support is + * in the works. These are normal Linux-USB controller drivers which + * use IRQs and have no dedicated thread. + * + * This version of the driver has only been used with products from + * Texas Instruments. Those products integrate the Inventra logic + * with other DMA, IRQ, and bus modules, as well as other logic that + * needs to be reflected in this driver. + * + * + * NOTE: the original Mentor code here was pretty much a collection + * of mechanisms that don't seem to have been fully integrated/working + * for *any* Linux kernel version. This version aims at Linux 2.6.now, + * Key open issues include: + * + * - Lack of host-side transaction scheduling, for all transfer types. + * The hardware doesn't do it; instead, software must. + * + * This is not an issue for OTG devices that don't support external + * hubs, but for more "normal" USB hosts it's a user issue that the + * "multipoint" support doesn't scale in the expected ways. That + * includes DaVinci EVM in a common non-OTG mode. + * + * * Control and bulk use dedicated endpoints, and there's as + * yet no mechanism to either (a) reclaim the hardware when + * peripherals are NAKing, which gets complicated with bulk + * endpoints, or (b) use more than a single bulk endpoint in + * each direction. + * + * RESULT: one device may be perceived as blocking another one. + * + * * Interrupt and isochronous will dynamically allocate endpoint + * hardware, but (a) there's no record keeping for bandwidth; + * (b) in the common case that few endpoints are available, there + * is no mechanism to reuse endpoints to talk to multiple devices. + * + * RESULT: At one extreme, bandwidth can be overcommitted in + * some hardware configurations, no faults will be reported. + * At the other extreme, the bandwidth capabilities which do + * exist tend to be severely undercommitted. You can't yet hook + * up both a keyboard and a mouse to an external USB hub. + */ + +/* + * This gets many kinds of configuration information: + * - Kconfig for everything user-configurable + * - <asm/arch/hdrc_cnf.h> for SOC or family details + * - platform_device for addressing, irq, and platform_data + * - platform_data is mostly for board-specific informarion + * + * Most of the conditional compilation will (someday) vanish. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/list.h> +#include <linux/kobject.h> +#include <linux/platform_device.h> +#include <linux/io.h> + +#ifdef CONFIG_ARM +#include <asm/arch/hardware.h> +#include <asm/arch/memory.h> +#include <asm/mach-types.h> +#endif + +#include "musb_core.h" + + +#ifdef CONFIG_ARCH_DAVINCI +#include "davinci.h" +#endif + + + +#if MUSB_DEBUG > 0 +unsigned debug = MUSB_DEBUG; +module_param(debug, uint, 0); +MODULE_PARM_DESC(debug, "initial debug message level"); + +#define MUSB_VERSION_SUFFIX "/dbg" +#endif + +#define DRIVER_AUTHOR "Mentor Graphics, Texas Instruments, Nokia" +#define DRIVER_DESC "Inventra Dual-Role USB Controller Driver" + +#define MUSB_VERSION_BASE "6.0" + +#ifndef MUSB_VERSION_SUFFIX +#define MUSB_VERSION_SUFFIX "" +#endif +#define MUSB_VERSION MUSB_VERSION_BASE MUSB_VERSION_SUFFIX + +#define DRIVER_INFO DRIVER_DESC ", v" MUSB_VERSION + +#define MUSB_DRIVER_NAME "musb_hdrc" +const char musb_driver_name[] = MUSB_DRIVER_NAME; + +MODULE_DESCRIPTION(DRIVER_INFO); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" MUSB_DRIVER_NAME); + + +/*-------------------------------------------------------------------------*/ + +static inline struct musb *dev_to_musb(struct device *dev) +{ +#ifdef CONFIG_USB_MUSB_HDRC_HCD + /* usbcore insists dev->driver_data is a "struct hcd *" */ + return hcd_to_musb(dev_get_drvdata(dev)); +#else + return dev_get_drvdata(dev); +#endif +} + +/*-------------------------------------------------------------------------*/ + +#ifndef CONFIG_USB_TUSB6010 +/* + * Load an endpoint's FIFO + */ +void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src) +{ + void __iomem *fifo = hw_ep->fifo; + + prefetch((u8 *)src); + + DBG(4, "%cX ep%d fifo %p count %d buf %p\n", + 'T', hw_ep->epnum, fifo, len, src); + + /* we can't assume unaligned reads work */ + if (likely((0x01 & (unsigned long) src) == 0)) { + u16 index = 0; + + /* best case is 32bit-aligned source address */ + if ((0x02 & (unsigned long) src) == 0) { + if (len >= 4) { + writesl(fifo, src + index, len >> 2); + index += len & ~0x03; + } + if (len & 0x02) { + musb_writew(fifo, 0, *(u16 *)&src[index]); + index += 2; + } + } else { + if (len >= 2) { + writesw(fifo, src + index, len >> 1); + index += len & ~0x01; + } + } + if (len & 0x01) + musb_writeb(fifo, 0, src[index]); + } else { + /* byte aligned */ + writesb(fifo, src, len); + } +} + +/* + * Unload an endpoint's FIFO + */ +void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst) +{ + void __iomem *fifo = hw_ep->fifo; + + DBG(4, "%cX ep%d fifo %p count %d buf %p\n", + 'R', hw_ep->epnum, fifo, len, dst); + + /* we can't assume unaligned writes work */ + if (likely((0x01 & (unsigned long) dst) == 0)) { + u16 index = 0; + + /* best case is 32bit-aligned destination address */ + if ((0x02 & (unsigned long) dst) == 0) { + if (len >= 4) { + readsl(fifo, dst, len >> 2); + index = len & ~0x03; + } + if (len & 0x02) { + *(u16 *)&dst[index] = musb_readw(fifo, 0); + index += 2; + } + } else { + if (len >= 2) { + readsw(fifo, dst, len >> 1); + index = len & ~0x01; + } + } + if (len & 0x01) + dst[index] = musb_readb(fifo, 0); + } else { + /* byte aligned */ + readsb(fifo, dst, len); + } +} + +#endif /* normal PIO */ + + +/*-------------------------------------------------------------------------*/ + +/* for high speed test mode; see USB 2.0 spec 7.1.20 */ +static const u8 musb_test_packet[53] = { + /* implicit SYNC then DATA0 to start */ + + /* JKJKJKJK x9 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* JJKKJJKK x8 */ + 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, + /* JJJJKKKK x8 */ + 0xee, 0xee, 0xee, 0xee, 0xee, 0xee, 0xee, 0xee, + /* JJJJJJJKKKKKKK x8 */ + 0xfe, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + /* JJJJJJJK x8 */ + 0x7f, 0xbf, 0xdf, 0xef, 0xf7, 0xfb, 0xfd, + /* JKKKKKKK x10, JK */ + 0xfc, 0x7e, 0xbf, 0xdf, 0xef, 0xf7, 0xfb, 0xfd, 0x7e + + /* implicit CRC16 then EOP to end */ +}; + +void musb_load_testpacket(struct musb *musb) +{ + void __iomem *regs = musb->endpoints[0].regs; + + musb_ep_select(musb->mregs, 0); + musb_write_fifo(musb->control_ep, + sizeof(musb_test_packet), musb_test_packet); + musb_writew(regs, MUSB_CSR0, MUSB_CSR0_TXPKTRDY); +} + +/*-------------------------------------------------------------------------*/ + +const char *otg_state_string(struct musb *musb) +{ + switch (musb->xceiv.state) { + case OTG_STATE_A_IDLE: return "a_idle"; + case OTG_STATE_A_WAIT_VRISE: return "a_wait_vrise"; + case OTG_STATE_A_WAIT_BCON: return "a_wait_bcon"; + case OTG_STATE_A_HOST: return "a_host"; + case OTG_STATE_A_SUSPEND: return "a_suspend"; + case OTG_STATE_A_PERIPHERAL: return "a_peripheral"; + case OTG_STATE_A_WAIT_VFALL: return "a_wait_vfall"; + case OTG_STATE_A_VBUS_ERR: return "a_vbus_err"; + case OTG_STATE_B_IDLE: return "b_idle"; + case OTG_STATE_B_SRP_INIT: return "b_srp_init"; + case OTG_STATE_B_PERIPHERAL: return "b_peripheral"; + case OTG_STATE_B_WAIT_ACON: return "b_wait_acon"; + case OTG_STATE_B_HOST: return "b_host"; + default: return "UNDEFINED"; + } +} + +#ifdef CONFIG_USB_MUSB_OTG + +/* + * See also USB_OTG_1-3.pdf 6.6.5 Timers + * REVISIT: Are the other timers done in the hardware? + */ +#define TB_ASE0_BRST 100 /* Min 3.125 ms */ + +/* + * Handles OTG hnp timeouts, such as b_ase0_brst + */ +void musb_otg_timer_func(unsigned long data) +{ + struct musb *musb = (struct musb *)data; + unsigned long flags; + + spin_lock_irqsave(&musb->lock, flags); + switch (musb->xceiv.state) { + case OTG_STATE_B_WAIT_ACON: + DBG(1, "HNP: b_wait_acon timeout; back to b_peripheral\n"); + musb_g_disconnect(musb); + musb->xceiv.state = OTG_STATE_B_PERIPHERAL; + musb->is_active = 0; + break; + case OTG_STATE_A_WAIT_BCON: + DBG(1, "HNP: a_wait_bcon timeout; back to a_host\n"); + musb_hnp_stop(musb); + break; + default: + DBG(1, "HNP: Unhandled mode %s\n", otg_state_string(musb)); + } + musb->ignore_disconnect = 0; + spin_unlock_irqrestore(&musb->lock, flags); +} + +static DEFINE_TIMER(musb_otg_timer, musb_otg_timer_func, 0, 0); + +/* + * Stops the B-device HNP state. Caller must take care of locking. + */ +void musb_hnp_stop(struct musb *musb) +{ + struct usb_hcd *hcd = musb_to_hcd(musb); + void __iomem *mbase = musb->mregs; + u8 reg; + + switch (musb->xceiv.state) { + case OTG_STATE_A_PERIPHERAL: + case OTG_STATE_A_WAIT_VFALL: + case OTG_STATE_A_WAIT_BCON: + DBG(1, "HNP: Switching back to A-host\n"); + musb_g_disconnect(musb); + musb->xceiv.state = OTG_STATE_A_IDLE; + MUSB_HST_MODE(musb); + musb->is_active = 0; + break; + case OTG_STATE_B_HOST: + DBG(1, "HNP: Disabling HR\n"); + hcd->self.is_b_host = 0; + musb->xceiv.state = OTG_STATE_B_PERIPHERAL; + MUSB_DEV_MODE(musb); + reg = musb_readb(mbase, MUSB_POWER); + reg |= MUSB_POWER_SUSPENDM; + musb_writeb(mbase, MUSB_POWER, reg); + /* REVISIT: Start SESSION_REQUEST here? */ + break; + default: + DBG(1, "HNP: Stopping in unknown state %s\n", + otg_state_string(musb)); + } + + /* + * When returning to A state after HNP, avoid hub_port_rebounce(), + * which cause occasional OPT A "Did not receive reset after connect" + * errors. + */ + musb->port1_status &= + ~(1 << USB_PORT_FEAT_C_CONNECTION); +} + +#endif + +/* + * Interrupt Service Routine to record USB "global" interrupts. + * Since these do not happen often and signify things of + * paramount importance, it seems OK to check them individually; + * the order of the tests is specified in the manual + * + * @param musb instance pointer + * @param int_usb register contents + * @param devctl + * @param power + */ + +#define STAGE0_MASK (MUSB_INTR_RESUME | MUSB_INTR_SESSREQ \ + | MUSB_INTR_VBUSERROR | MUSB_INTR_CONNECT \ + | MUSB_INTR_RESET) + +static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, + u8 devctl, u8 power) +{ + irqreturn_t handled = IRQ_NONE; + void __iomem *mbase = musb->mregs; + + DBG(3, "<== Power=%02x, DevCtl=%02x, int_usb=0x%x\n", power, devctl, + int_usb); + + /* in host mode, the peripheral may issue remote wakeup. + * in peripheral mode, the host may resume the link. + * spurious RESUME irqs happen too, paired with SUSPEND. + */ + if (int_usb & MUSB_INTR_RESUME) { + handled = IRQ_HANDLED; + DBG(3, "RESUME (%s)\n", otg_state_string(musb)); + + if (devctl & MUSB_DEVCTL_HM) { +#ifdef CONFIG_USB_MUSB_HDRC_HCD + switch (musb->xceiv.state) { + case OTG_STATE_A_SUSPEND: + /* remote wakeup? later, GetPortStatus + * will stop RESUME signaling + */ + + if (power & MUSB_POWER_SUSPENDM) { + /* spurious */ + musb->int_usb &= ~MUSB_INTR_SUSPEND; + DBG(2, "Spurious SUSPENDM\n"); + break; + } + + power &= ~MUSB_POWER_SUSPENDM; + musb_writeb(mbase, MUSB_POWER, + power | MUSB_POWER_RESUME); + + musb->port1_status |= + (USB_PORT_STAT_C_SUSPEND << 16) + | MUSB_PORT_STAT_RESUME; + musb->rh_timer = jiffies + + msecs_to_jiffies(20); + + musb->xceiv.state = OTG_STATE_A_HOST; + musb->is_active = 1; + usb_hcd_resume_root_hub(musb_to_hcd(musb)); + break; + case OTG_STATE_B_WAIT_ACON: + musb->xceiv.state = OTG_STATE_B_PERIPHERAL; + musb->is_active = 1; + MUSB_DEV_MODE(musb); + break; + default: + WARNING("bogus %s RESUME (%s)\n", + "host", + otg_state_string(musb)); + } +#endif + } else { + switch (musb->xceiv.state) { +#ifdef CONFIG_USB_MUSB_HDRC_HCD + case OTG_STATE_A_SUSPEND: + /* possibly DISCONNECT is upcoming */ + musb->xceiv.state = OTG_STATE_A_HOST; + usb_hcd_resume_root_hub(musb_to_hcd(musb)); + break; +#endif +#ifdef CONFIG_USB_GADGET_MUSB_HDRC + case OTG_STATE_B_WAIT_ACON: + case OTG_STATE_B_PERIPHERAL: + /* disconnect while suspended? we may + * not get a disconnect irq... + */ + if ((devctl & MUSB_DEVCTL_VBUS) + != (3 << MUSB_DEVCTL_VBUS_SHIFT) + ) { + musb->int_usb |= MUSB_INTR_DISCONNECT; + musb->int_usb &= ~MUSB_INTR_SUSPEND; + break; + } + musb_g_resume(musb); + break; + case OTG_STATE_B_IDLE: + musb->int_usb &= ~MUSB_INTR_SUSPEND; + break; +#endif + default: + WARNING("bogus %s RESUME (%s)\n", + "peripheral", + otg_state_string(musb)); + } + } + } + +#ifdef CONFIG_USB_MUSB_HDRC_HCD + /* see manual for the order of the tests */ + if (int_usb & MUSB_INTR_SESSREQ) { + DBG(1, "SESSION_REQUEST (%s)\n", otg_state_string(musb)); + + /* IRQ arrives from ID pin sense or (later, if VBUS power + * is removed) SRP. responses are time critical: + * - turn on VBUS (with silicon-specific mechanism) + * - go through A_WAIT_VRISE + * - ... to A_WAIT_BCON. + * a_wait_vrise_tmout triggers VBUS_ERROR transitions + */ + musb_writeb(mbase, MUSB_DEVCTL, MUSB_DEVCTL_SESSION); + musb->ep0_stage = MUSB_EP0_START; + musb->xceiv.state = OTG_STATE_A_IDLE; + MUSB_HST_MODE(musb); + musb_set_vbus(musb, 1); + + handled = IRQ_HANDLED; + } + + if (int_usb & MUSB_INTR_VBUSERROR) { + int ignore = 0; + + /* During connection as an A-Device, we may see a short + * current spikes causing voltage drop, because of cable + * and peripheral capacitance combined with vbus draw. + * (So: less common with truly self-powered devices, where + * vbus doesn't act like a power supply.) + * + * Such spikes are short; usually less than ~500 usec, max + * of ~2 msec. That is, they're not sustained overcurrent + * errors, though they're reported using VBUSERROR irqs. + * + * Workarounds: (a) hardware: use self powered devices. + * (b) software: ignore non-repeated VBUS errors. + * + * REVISIT: do delays from lots of DEBUG_KERNEL checks + * make trouble here, keeping VBUS < 4.4V ? + */ + switch (musb->xceiv.state) { + case OTG_STATE_A_HOST: + /* recovery is dicey once we've gotten past the + * initial stages of enumeration, but if VBUS + * stayed ok at the other end of the link, and + * another reset is due (at least for high speed, + * to redo the chirp etc), it might work OK... + */ + case OTG_STATE_A_WAIT_BCON: + case OTG_STATE_A_WAIT_VRISE: + if (musb->vbuserr_retry) { + musb->vbuserr_retry--; + ignore = 1; + devctl |= MUSB_DEVCTL_SESSION; + musb_writeb(mbase, MUSB_DEVCTL, devctl); + } else { + musb->port1_status |= + (1 << USB_PORT_FEAT_OVER_CURRENT) + | (1 << USB_PORT_FEAT_C_OVER_CURRENT); + } + break; + default: + break; + } + + DBG(1, "VBUS_ERROR in %s (%02x, %s), retry #%d, port1 %08x\n", + otg_state_string(musb), + devctl, + ({ char *s; + switch (devctl & MUSB_DEVCTL_VBUS) { + case 0 << MUSB_DEVCTL_VBUS_SHIFT: + s = "<SessEnd"; break; + case 1 << MUSB_DEVCTL_VBUS_SHIFT: + s = "<AValid"; break; + case 2 << MUSB_DEVCTL_VBUS_SHIFT: + s = "<VBusValid"; break; + /* case 3 << MUSB_DEVCTL_VBUS_SHIFT: */ + default: + s = "VALID"; break; + }; s; }), + VBUSERR_RETRY_COUNT - musb->vbuserr_retry, + musb->port1_status); + + /* go through A_WAIT_VFALL then start a new session */ + if (!ignore) + musb_set_vbus(musb, 0); + handled = IRQ_HANDLED; + } + + if (int_usb & MUSB_INTR_CONNECT) { + struct usb_hcd *hcd = musb_to_hcd(musb); + + handled = IRQ_HANDLED; + musb->is_active = 1; + set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags); + + musb->ep0_stage = MUSB_EP0_START; + +#ifdef CONFIG_USB_MUSB_OTG + /* flush endpoints when transitioning from Device Mode */ + if (is_peripheral_active(musb)) { + /* REVISIT HNP; just force disconnect */ + } + musb_writew(mbase, MUSB_INTRTXE, musb->epmask); + musb_writew(mbase, MUSB_INTRRXE, musb->epmask & 0xfffe); + musb_writeb(mbase, MUSB_INTRUSBE, 0xf7); +#endif + musb->port1_status &= ~(USB_PORT_STAT_LOW_SPEED + |USB_PORT_STAT_HIGH_SPEED + |USB_PORT_STAT_ENABLE + ); + musb->port1_status |= USB_PORT_STAT_CONNECTION + |(USB_PORT_STAT_C_CONNECTION << 16); + + /* high vs full speed is just a guess until after reset */ + if (devctl & MUSB_DEVCTL_LSDEV) + musb->port1_status |= USB_PORT_STAT_LOW_SPEED; + + if (hcd->status_urb) + usb_hcd_poll_rh_status(hcd); + else + usb_hcd_resume_root_hub(hcd); + + MUSB_HST_MODE(musb); + + /* indicate new connection to OTG machine */ + switch (musb->xceiv.state) { + case OTG_STATE_B_PERIPHERAL: + if (int_usb & MUSB_INTR_SUSPEND) { + DBG(1, "HNP: SUSPEND+CONNECT, now b_host\n"); + musb->xceiv.state = OTG_STATE_B_HOST; + hcd->self.is_b_host = 1; + int_usb &= ~MUSB_INTR_SUSPEND; + } else + DBG(1, "CONNECT as b_peripheral???\n"); + break; + case OTG_STATE_B_WAIT_ACON: + DBG(1, "HNP: Waiting to switch to b_host state\n"); + musb->xceiv.state = OTG_STATE_B_HOST; + hcd->self.is_b_host = 1; + break; + default: + if ((devctl & MUSB_DEVCTL_VBUS) + == (3 << MUSB_DEVCTL_VBUS_SHIFT)) { + musb->xceiv.state = OTG_STATE_A_HOST; + hcd->self.is_b_host = 0; + } + break; + } + DBG(1, "CONNECT (%s) devctl %02x\n", + otg_state_string(musb), devctl); + } +#endif /* CONFIG_USB_MUSB_HDRC_HCD */ + + /* mentor saves a bit: bus reset and babble share the same irq. + * only host sees babble; only peripheral sees bus reset. + */ + if (int_usb & MUSB_INTR_RESET) { + if (is_host_capable() && (devctl & MUSB_DEVCTL_HM) != 0) { + /* + * Looks like non-HS BABBLE can be ignored, but + * HS BABBLE is an error condition. For HS the solution + * is to avoid babble in the first place and fix what + * caused BABBLE. When HS BABBLE happens we can only + * stop the session. + */ + if (devctl & (MUSB_DEVCTL_FSDEV | MUSB_DEVCTL_LSDEV)) + DBG(1, "BABBLE devctl: %02x\n", devctl); + else { + ERR("Stopping host session -- babble\n"); + musb_writeb(mbase, MUSB_DEVCTL, 0); + } + } else if (is_peripheral_capable()) { + DBG(1, "BUS RESET as %s\n", otg_state_string(musb)); + switch (musb->xceiv.state) { +#ifdef CONFIG_USB_OTG + case OTG_STATE_A_SUSPEND: + /* We need to ignore disconnect on suspend + * otherwise tusb 2.0 won't reconnect after a + * power cycle, which breaks otg compliance. + */ + musb->ignore_disconnect = 1; + musb_g_reset(musb); + /* FALLTHROUGH */ + case OTG_STATE_A_WAIT_BCON: /* OPT TD.4.7-900ms */ + DBG(1, "HNP: Setting timer as %s\n", + otg_state_string(musb)); + musb_otg_timer.data = (unsigned long)musb; + mod_timer(&musb_otg_timer, jiffies + + msecs_to_jiffies(100)); + break; + case OTG_STATE_A_PERIPHERAL: + musb_hnp_stop(musb); + break; + case OTG_STATE_B_WAIT_ACON: + DBG(1, "HNP: RESET (%s), to b_peripheral\n", + otg_state_string(musb)); + musb->xceiv.state = OTG_STATE_B_PERIPHERAL; + musb_g_reset(musb); + break; +#endif + case OTG_STATE_B_IDLE: + musb->xceiv.state = OTG_STATE_B_PERIPHERAL; + /* FALLTHROUGH */ + case OTG_STATE_B_PERIPHERAL: + musb_g_reset(musb); + break; + default: + DBG(1, "Unhandled BUS RESET as %s\n", + otg_state_string(musb)); + } + } + + handled = IRQ_HANDLED; + } + schedule_work(&musb->irq_work); + + return handled; +} + +/* + * Interrupt Service Routine to record USB "global" interrupts. + * Since these do not happen often and signify things of + * paramount importance, it seems OK to check them individually; + * the order of the tests is specified in the manual + * + * @param musb instance pointer + * @param int_usb register contents + * @param devctl + * @param power + */ +static irqreturn_t musb_stage2_irq(struct musb *musb, u8 int_usb, + u8 devctl, u8 power) +{ + irqreturn_t handled = IRQ_NONE; + +#if 0 +/* REVISIT ... this would be for multiplexing periodic endpoints, or + * supporting transfer phasing to prevent exceeding ISO bandwidth + * limits of a given frame or microframe. + * + * It's not needed for peripheral side, which dedicates endpoints; + * though it _might_ use SOF irqs for other purposes. + * + * And it's not currently needed for host side, which also dedicates + * endpoints, relies on TX/RX interval registers, and isn't claimed + * to support ISO transfers yet. + */ + if (int_usb & MUSB_INTR_SOF) { + void __iomem *mbase = musb->mregs; + struct musb_hw_ep *ep; + u8 epnum; + u16 frame; + + DBG(6, "START_OF_FRAME\n"); + handled = IRQ_HANDLED; + + /* start any periodic Tx transfers waiting for current frame */ + frame = musb_readw(mbase, MUSB_FRAME); + ep = musb->endpoints; + for (epnum = 1; (epnum < musb->nr_endpoints) + && (musb->epmask >= (1 << epnum)); + epnum++, ep++) { + /* + * FIXME handle framecounter wraps (12 bits) + * eliminate duplicated StartUrb logic + */ + if (ep->dwWaitFrame >= frame) { + ep->dwWaitFrame = 0; + pr_debug("SOF --> periodic TX%s on %d\n", + ep->tx_channel ? " DMA" : "", + epnum); + if (!ep->tx_channel) + musb_h_tx_start(musb, epnum); + else + cppi_hostdma_start(musb, epnum); + } + } /* end of for loop */ + } +#endif + + if ((int_usb & MUSB_INTR_DISCONNECT) && !musb->ignore_disconnect) { + DBG(1, "DISCONNECT (%s) as %s, devctl %02x\n", + otg_state_string(musb), + MUSB_MODE(musb), devctl); + handled = IRQ_HANDLED; + + switch (musb->xceiv.state) { +#ifdef CONFIG_USB_MUSB_HDRC_HCD + case OTG_STATE_A_HOST: + case OTG_STATE_A_SUSPEND: + musb_root_disconnect(musb); + if (musb->a_wait_bcon != 0) + musb_platform_try_idle(musb, jiffies + + msecs_to_jiffies(musb->a_wait_bcon)); + break; +#endif /* HOST */ +#ifdef CONFIG_USB_MUSB_OTG + case OTG_STATE_B_HOST: + musb_hnp_stop(musb); + break; + case OTG_STATE_A_PERIPHERAL: + musb_hnp_stop(musb); + musb_root_disconnect(musb); + /* FALLTHROUGH */ + case OTG_STATE_B_WAIT_ACON: + /* FALLTHROUGH */ +#endif /* OTG */ +#ifdef CONFIG_USB_GADGET_MUSB_HDRC + case OTG_STATE_B_PERIPHERAL: + case OTG_STATE_B_IDLE: + musb_g_disconnect(musb); + break; +#endif /* GADGET */ + default: + WARNING("unhandled DISCONNECT transition (%s)\n", + otg_state_string(musb)); + break; + } + + schedule_work(&musb->irq_work); + } + + if (int_usb & MUSB_INTR_SUSPEND) { + DBG(1, "SUSPEND (%s) devctl %02x power %02x\n", + otg_state_string(musb), devctl, power); + handled = IRQ_HANDLED; + + switch (musb->xceiv.state) { +#ifdef CONFIG_USB_MUSB_OTG + case OTG_STATE_A_PERIPHERAL: + /* + * We cannot stop HNP here, devctl BDEVICE might be + * still set. + */ + break; +#endif + case OTG_STATE_B_PERIPHERAL: + musb_g_suspend(musb); + musb->is_active = is_otg_enabled(musb) + && musb->xceiv.gadget->b_hnp_enable; + if (musb->is_active) { +#ifdef CONFIG_USB_MUSB_OTG + musb->xceiv.state = OTG_STATE_B_WAIT_ACON; + DBG(1, "HNP: Setting timer for b_ase0_brst\n"); + musb_otg_timer.data = (unsigned long)musb; + mod_timer(&musb_otg_timer, jiffies + + msecs_to_jiffies(TB_ASE0_BRST)); +#endif + } + break; + case OTG_STATE_A_WAIT_BCON: + if (musb->a_wait_bcon != 0) + musb_platform_try_idle(musb, jiffies + + msecs_to_jiffies(musb->a_wait_bcon)); + break; + case OTG_STATE_A_HOST: + musb->xceiv.state = OTG_STATE_A_SUSPEND; + musb->is_active = is_otg_enabled(musb) + && musb->xceiv.host->b_hnp_enable; + break; + case OTG_STATE_B_HOST: + /* Transition to B_PERIPHERAL, see 6.8.2.6 p 44 */ + DBG(1, "REVISIT: SUSPEND as B_HOST\n"); + break; + default: + /* "should not happen" */ + musb->is_active = 0; + break; + } + schedule_work(&musb->irq_work); + } + + + return handled; +} + +/*-------------------------------------------------------------------------*/ + +/* +* Program the HDRC to start (enable interrupts, dma, etc.). +*/ +void musb_start(struct musb *musb) +{ + void __iomem *regs = musb->mregs; + u8 devctl = musb_readb(regs, MUSB_DEVCTL); + + DBG(2, "<== devctl %02x\n", devctl); + + /* Set INT enable registers, enable interrupts */ + musb_writew(regs, MUSB_INTRTXE, musb->epmask); + musb_writew(regs, MUSB_INTRRXE, musb->epmask & 0xfffe); + musb_writeb(regs, MUSB_INTRUSBE, 0xf7); + + musb_writeb(regs, MUSB_TESTMODE, 0); + + /* put into basic highspeed mode and start session */ + musb_writeb(regs, MUSB_POWER, MUSB_POWER_ISOUPDATE + | MUSB_POWER_SOFTCONN + | MUSB_POWER_HSENAB + /* ENSUSPEND wedges tusb */ + /* | MUSB_POWER_ENSUSPEND */ + ); + + musb->is_active = 0; + devctl = musb_readb(regs, MUSB_DEVCTL); + devctl &= ~MUSB_DEVCTL_SESSION; + + if (is_otg_enabled(musb)) { + /* session started after: + * (a) ID-grounded irq, host mode; + * (b) vbus present/connect IRQ, peripheral mode; + * (c) peripheral initiates, using SRP + */ + if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS) + musb->is_active = 1; + else + devctl |= MUSB_DEVCTL_SESSION; + + } else if (is_host_enabled(musb)) { + /* assume ID pin is hard-wired to ground */ + devctl |= MUSB_DEVCTL_SESSION; + + } else /* peripheral is enabled */ { + if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS) + musb->is_active = 1; + } + musb_platform_enable(musb); + musb_writeb(regs, MUSB_DEVCTL, devctl); +} + + +static void musb_generic_disable(struct musb *musb) +{ + void __iomem *mbase = musb->mregs; + u16 temp; + + /* disable interrupts */ + musb_writeb(mbase, MUSB_INTRUSBE, 0); + musb_writew(mbase, MUSB_INTRTXE, 0); + musb_writew(mbase, MUSB_INTRRXE, 0); + + /* off */ + musb_writeb(mbase, MUSB_DEVCTL, 0); + + /* flush pending interrupts */ + temp = musb_readb(mbase, MUSB_INTRUSB); + temp = musb_readw(mbase, MUSB_INTRTX); + temp = musb_readw(mbase, MUSB_INTRRX); + +} + +/* + * Make the HDRC stop (disable interrupts, etc.); + * reversible by musb_start + * called on gadget driver unregister + * with controller locked, irqs blocked + * acts as a NOP unless some role activated the hardware + */ +void musb_stop(struct musb *musb) +{ + /* stop IRQs, timers, ... */ + musb_platform_disable(musb); + musb_generic_disable(musb); + DBG(3, "HDRC disabled\n"); + + /* FIXME + * - mark host and/or peripheral drivers unusable/inactive + * - disable DMA (and enable it in HdrcStart) + * - make sure we can musb_start() after musb_stop(); with + * OTG mode, gadget driver module rmmod/modprobe cycles that + * - ... + */ + musb_platform_try_idle(musb, 0); +} + +static void musb_shutdown(struct platform_device *pdev) +{ + struct musb *musb = dev_to_musb(&pdev->dev); + unsigned long flags; + + spin_lock_irqsave(&musb->lock, flags); + musb_platform_disable(musb); + musb_generic_disable(musb); + if (musb->clock) { + clk_put(musb->clock); + musb->clock = NULL; + } + spin_unlock_irqrestore(&musb->lock, flags); + + /* FIXME power down */ +} + + +/*-------------------------------------------------------------------------*/ + +/* + * The silicon either has hard-wired endpoint configurations, or else + * "dynamic fifo" sizing. The driver has support for both, though at this + * writing only the dynamic sizing is very well tested. We use normal + * idioms to so both modes are compile-tested, but dead code elimination + * leaves only the relevant one in the object file. + * + * We don't currently use dynamic fifo setup capability to do anything + * more than selecting one of a bunch of predefined configurations. + */ +#if defined(CONFIG_USB_TUSB6010) || \ + defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP34XX) +static ushort __initdata fifo_mode = 4; +#else +static ushort __initdata fifo_mode = 2; +#endif + +/* "modprobe ... fifo_mode=1" etc */ +module_param(fifo_mode, ushort, 0); +MODULE_PARM_DESC(fifo_mode, "initial endpoint configuration"); + + +enum fifo_style { FIFO_RXTX, FIFO_TX, FIFO_RX } __attribute__ ((packed)); +enum buf_mode { BUF_SINGLE, BUF_DOUBLE } __attribute__ ((packed)); + +struct fifo_cfg { + u8 hw_ep_num; + enum fifo_style style; + enum buf_mode mode; + u16 maxpacket; +}; + +/* + * tables defining fifo_mode values. define more if you like. + * for host side, make sure both halves of ep1 are set up. + */ + +/* mode 0 - fits in 2KB */ +static struct fifo_cfg __initdata mode_0_cfg[] = { +{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, }, +{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, }, +{ .hw_ep_num = 2, .style = FIFO_RXTX, .maxpacket = 512, }, +{ .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 256, }, +{ .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 256, }, +}; + +/* mode 1 - fits in 4KB */ +static struct fifo_cfg __initdata mode_1_cfg[] = { +{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, .mode = BUF_DOUBLE, }, +{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, .mode = BUF_DOUBLE, }, +{ .hw_ep_num = 2, .style = FIFO_RXTX, .maxpacket = 512, .mode = BUF_DOUBLE, }, +{ .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 256, }, +{ .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 256, }, +}; + +/* mode 2 - fits in 4KB */ +static struct fifo_cfg __initdata mode_2_cfg[] = { +{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, }, +{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, }, +{ .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, }, +{ .hw_ep_num = 2, .style = FIFO_RX, .maxpacket = 512, }, +{ .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 256, }, +{ .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 256, }, +}; + +/* mode 3 - fits in 4KB */ +static struct fifo_cfg __initdata mode_3_cfg[] = { +{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, .mode = BUF_DOUBLE, }, +{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, .mode = BUF_DOUBLE, }, +{ .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, }, +{ .hw_ep_num = 2, .style = FIFO_RX, .maxpacket = 512, }, +{ .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 256, }, +{ .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 256, }, +}; + +/* mode 4 - fits in 16KB */ +static struct fifo_cfg __initdata mode_4_cfg[] = { +{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, }, +{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, }, +{ .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, }, +{ .hw_ep_num = 2, .style = FIFO_RX, .maxpacket = 512, }, +{ .hw_ep_num = 3, .style = FIFO_TX, .maxpacket = 512, }, +{ .hw_ep_num = 3, .style = FIFO_RX, .maxpacket = 512, }, +{ .hw_ep_num = 4, .style = FIFO_TX, .maxpacket = 512, }, +{ .hw_ep_num = 4, .style = FIFO_RX, .maxpacket = 512, }, +{ .hw_ep_num = 5, .style = FIFO_TX, .maxpacket = 512, }, +{ .hw_ep_num = 5, .style = FIFO_RX, .maxpacket = 512, }, +{ .hw_ep_num = 6, .style = FIFO_TX, .maxpacket = 512, }, +{ .hw_ep_num = 6, .style = FIFO_RX, .maxpacket = 512, }, +{ .hw_ep_num = 7, .style = FIFO_TX, .maxpacket = 512, }, +{ .hw_ep_num = 7, .style = FIFO_RX, .maxpacket = 512, }, +{ .hw_ep_num = 8, .style = FIFO_TX, .maxpacket = 512, }, +{ .hw_ep_num = 8, .style = FIFO_RX, .maxpacket = 512, }, +{ .hw_ep_num = 9, .style = FIFO_TX, .maxpacket = 512, }, +{ .hw_ep_num = 9, .style = FIFO_RX, .maxpacket = 512, }, +{ .hw_ep_num = 10, .style = FIFO_TX, .maxpacket = 512, }, +{ .hw_ep_num = 10, .style = FIFO_RX, .maxpacket = 512, }, +{ .hw_ep_num = 11, .style = FIFO_TX, .maxpacket = 512, }, +{ .hw_ep_num = 11, .style = FIFO_RX, .maxpacket = 512, }, +{ .hw_ep_num = 12, .style = FIFO_TX, .maxpacket = 512, }, +{ .hw_ep_num = 12, .style = FIFO_RX, .maxpacket = 512, }, +{ .hw_ep_num = 13, .style = FIFO_TX, .maxpacket = 512, }, +{ .hw_ep_num = 13, .style = FIFO_RX, .maxpacket = 512, }, +{ .hw_ep_num = 14, .style = FIFO_RXTX, .maxpacket = 1024, }, +{ .hw_ep_num = 15, .style = FIFO_RXTX, .maxpacket = 1024, }, +}; + + +/* + * configure a fifo; for non-shared endpoints, this may be called + * once for a tx fifo and once for an rx fifo. + * + * returns negative errno or offset for next fifo. + */ +static int __init +fifo_setup(struct musb *musb, struct musb_hw_ep *hw_ep, + const struct fifo_cfg *cfg, u16 offset) +{ + void __iomem *mbase = musb->mregs; + int size = 0; + u16 maxpacket = cfg->maxpacket; + u16 c_off = offset >> 3; + u8 c_size; + + /* expect hw_ep has already been zero-initialized */ + + size = ffs(max(maxpacket, (u16) 8)) - 1; + maxpacket = 1 << size; + + c_size = size - 3; + if (cfg->mode == BUF_DOUBLE) { + if ((offset + (maxpacket << 1)) > + (1 << (musb->config->ram_bits + 2))) + return -EMSGSIZE; + c_size |= MUSB_FIFOSZ_DPB; + } else { + if ((offset + maxpacket) > (1 << (musb->config->ram_bits + 2))) + return -EMSGSIZE; + } + + /* configure the FIFO */ + musb_writeb(mbase, MUSB_INDEX, hw_ep->epnum); + +#ifdef CONFIG_USB_MUSB_HDRC_HCD + /* EP0 reserved endpoint for control, bidirectional; + * EP1 reserved for bulk, two unidirection halves. + */ + if (hw_ep->epnum == 1) + musb->bulk_ep = hw_ep; + /* REVISIT error check: be sure ep0 can both rx and tx ... */ +#endif + switch (cfg->style) { + case FIFO_TX: + musb_writeb(mbase, MUSB_TXFIFOSZ, c_size); + musb_writew(mbase, MUSB_TXFIFOADD, c_off); + hw_ep->tx_double_buffered = !!(c_size & MUSB_FIFOSZ_DPB); + hw_ep->max_packet_sz_tx = maxpacket; + break; + case FIFO_RX: + musb_writeb(mbase, MUSB_RXFIFOSZ, c_size); + musb_writew(mbase, MUSB_RXFIFOADD, c_off); + hw_ep->rx_double_buffered = !!(c_size & MUSB_FIFOSZ_DPB); + hw_ep->max_packet_sz_rx = maxpacket; + break; + case FIFO_RXTX: + musb_writeb(mbase, MUSB_TXFIFOSZ, c_size); + musb_writew(mbase, MUSB_TXFIFOADD, c_off); + hw_ep->rx_double_buffered = !!(c_size & MUSB_FIFOSZ_DPB); + hw_ep->max_packet_sz_rx = maxpacket; + + musb_writeb(mbase, MUSB_RXFIFOSZ, c_size); + musb_writew(mbase, MUSB_RXFIFOADD, c_off); + hw_ep->tx_double_buffered = hw_ep->rx_double_buffered; + hw_ep->max_packet_sz_tx = maxpacket; + + hw_ep->is_shared_fifo = true; + break; + } + + /* NOTE rx and tx endpoint irqs aren't managed separately, + * which happens to be ok + */ + musb->epmask |= (1 << hw_ep->epnum); + + return offset + (maxpacket << ((c_size & MUSB_FIFOSZ_DPB) ? 1 : 0)); +} + +static struct fifo_cfg __initdata ep0_cfg = { + .style = FIFO_RXTX, .maxpacket = 64, +}; + +static int __init ep_config_from_table(struct musb *musb) +{ + const struct fifo_cfg *cfg; + unsigned i, n; + int offset; + struct musb_hw_ep *hw_ep = musb->endpoints; + + switch (fifo_mode) { + default: + fifo_mode = 0; + /* FALLTHROUGH */ + case 0: + cfg = mode_0_cfg; + n = ARRAY_SIZE(mode_0_cfg); + break; + case 1: + cfg = mode_1_cfg; + n = ARRAY_SIZE(mode_1_cfg); + break; + case 2: + cfg = mode_2_cfg; + n = ARRAY_SIZE(mode_2_cfg); + break; + case 3: + cfg = mode_3_cfg; + n = ARRAY_SIZE(mode_3_cfg); + break; + case 4: + cfg = mode_4_cfg; + n = ARRAY_SIZE(mode_4_cfg); + break; + } + + printk(KERN_DEBUG "%s: setup fifo_mode %d\n", + musb_driver_name, fifo_mode); + + + offset = fifo_setup(musb, hw_ep, &ep0_cfg, 0); + /* assert(offset > 0) */ + + /* NOTE: for RTL versions >= 1.400 EPINFO and RAMINFO would + * be better than static musb->config->num_eps and DYN_FIFO_SIZE... + */ + + for (i = 0; i < n; i++) { + u8 epn = cfg->hw_ep_num; + + if (epn >= musb->config->num_eps) { + pr_debug("%s: invalid ep %d\n", + musb_driver_name, epn); + continue; + } + offset = fifo_setup(musb, hw_ep + epn, cfg++, offset); + if (offset < 0) { + pr_debug("%s: mem overrun, ep %d\n", + musb_driver_name, epn); + return -EINVAL; + } + epn++; + musb->nr_endpoints = max(epn, musb->nr_endpoints); + } + + printk(KERN_DEBUG "%s: %d/%d max ep, %d/%d memory\n", + musb_driver_name, + n + 1, musb->config->num_eps * 2 - 1, + offset, (1 << (musb->config->ram_bits + 2))); + +#ifdef CONFIG_USB_MUSB_HDRC_HCD + if (!musb->bulk_ep) { + pr_debug("%s: missing bulk\n", musb_driver_name); + return -EINVAL; + } +#endif + + return 0; +} + + +/* + * ep_config_from_hw - when MUSB_C_DYNFIFO_DEF is false + * @param musb the controller + */ +static int __init ep_config_from_hw(struct musb *musb) +{ + u8 epnum = 0, reg; + struct musb_hw_ep *hw_ep; + void *mbase = musb->mregs; + + DBG(2, "<== static silicon ep config\n"); + + /* FIXME pick up ep0 maxpacket size */ + + for (epnum = 1; epnum < musb->config->num_eps; epnum++) { + musb_ep_select(mbase, epnum); + hw_ep = musb->endpoints + epnum; + + /* read from core using indexed model */ + reg = musb_readb(hw_ep->regs, 0x10 + MUSB_FIFOSIZE); + if (!reg) { + /* 0's returned when no more endpoints */ + break; + } + musb->nr_endpoints++; + musb->epmask |= (1 << epnum); + + hw_ep->max_packet_sz_tx = 1 << (reg & 0x0f); + + /* shared TX/RX FIFO? */ + if ((reg & 0xf0) == 0xf0) { + hw_ep->max_packet_sz_rx = hw_ep->max_packet_sz_tx; + hw_ep->is_shared_fifo = true; + continue; + } else { + hw_ep->max_packet_sz_rx = 1 << ((reg & 0xf0) >> 4); + hw_ep->is_shared_fifo = false; + } + + /* FIXME set up hw_ep->{rx,tx}_double_buffered */ + +#ifdef CONFIG_USB_MUSB_HDRC_HCD + /* pick an RX/TX endpoint for bulk */ + if (hw_ep->max_packet_sz_tx < 512 + || hw_ep->max_packet_sz_rx < 512) + continue; + + /* REVISIT: this algorithm is lazy, we should at least + * try to pick a double buffered endpoint. + */ + if (musb->bulk_ep) + continue; + musb->bulk_ep = hw_ep; +#endif + } + +#ifdef CONFIG_USB_MUSB_HDRC_HCD + if (!musb->bulk_ep) { + pr_debug("%s: missing bulk\n", musb_driver_name); + return -EINVAL; + } +#endif + + return 0; +} + +enum { MUSB_CONTROLLER_MHDRC, MUSB_CONTROLLER_HDRC, }; + +/* Initialize MUSB (M)HDRC part of the USB hardware subsystem; + * configure endpoints, or take their config from silicon + */ +static int __init musb_core_init(u16 musb_type, struct musb *musb) +{ +#ifdef MUSB_AHB_ID + u32 data; +#endif + u8 reg; + char *type; + u16 hwvers, rev_major, rev_minor; + char aInfo[78], aRevision[32], aDate[12]; + void __iomem *mbase = musb->mregs; + int status = 0; + int i; + + /* log core options (read using indexed model) */ + musb_ep_select(mbase, 0); + reg = musb_readb(mbase, 0x10 + MUSB_CONFIGDATA); + + strcpy(aInfo, (reg & MUSB_CONFIGDATA_UTMIDW) ? "UTMI-16" : "UTMI-8"); + if (reg & MUSB_CONFIGDATA_DYNFIFO) + strcat(aInfo, ", dyn FIFOs"); + if (reg & MUSB_CONFIGDATA_MPRXE) { + strcat(aInfo, ", bulk combine"); +#ifdef C_MP_RX + musb->bulk_combine = true; +#else + strcat(aInfo, " (X)"); /* no driver support */ +#endif + } + if (reg & MUSB_CONFIGDATA_MPTXE) { + strcat(aInfo, ", bulk split"); +#ifdef C_MP_TX + musb->bulk_split = true; +#else + strcat(aInfo, " (X)"); /* no driver support */ +#endif + } + if (reg & MUSB_CONFIGDATA_HBRXE) { + strcat(aInfo, ", HB-ISO Rx"); + strcat(aInfo, " (X)"); /* no driver support */ + } + if (reg & MUSB_CONFIGDATA_HBTXE) { + strcat(aInfo, ", HB-ISO Tx"); + strcat(aInfo, " (X)"); /* no driver support */ + } + if (reg & MUSB_CONFIGDATA_SOFTCONE) + strcat(aInfo, ", SoftConn"); + + printk(KERN_DEBUG "%s: ConfigData=0x%02x (%s)\n", + musb_driver_name, reg, aInfo); + +#ifdef MUSB_AHB_ID + data = musb_readl(mbase, 0x404); + sprintf(aDate, "%04d-%02x-%02x", (data & 0xffff), + (data >> 16) & 0xff, (data >> 24) & 0xff); + /* FIXME ID2 and ID3 are unused */ + data = musb_readl(mbase, 0x408); + printk(KERN_DEBUG "ID2=%lx\n", (long unsigned)data); + data = musb_readl(mbase, 0x40c); + printk(KERN_DEBUG "ID3=%lx\n", (long unsigned)data); + reg = musb_readb(mbase, 0x400); + musb_type = ('M' == reg) ? MUSB_CONTROLLER_MHDRC : MUSB_CONTROLLER_HDRC; +#else + aDate[0] = 0; +#endif + if (MUSB_CONTROLLER_MHDRC == musb_type) { + musb->is_multipoint = 1; + type = "M"; + } else { + musb->is_multipoint = 0; + type = ""; +#ifdef CONFIG_USB_MUSB_HDRC_HCD +#ifndef CONFIG_USB_OTG_BLACKLIST_HUB + printk(KERN_ERR + "%s: kernel must blacklist external hubs\n", + musb_driver_name); +#endif +#endif + } + + /* log release info */ + hwvers = musb_readw(mbase, MUSB_HWVERS); + rev_major = (hwvers >> 10) & 0x1f; + rev_minor = hwvers & 0x3ff; + snprintf(aRevision, 32, "%d.%d%s", rev_major, + rev_minor, (hwvers & 0x8000) ? "RC" : ""); + printk(KERN_DEBUG "%s: %sHDRC RTL version %s %s\n", + musb_driver_name, type, aRevision, aDate); + + /* configure ep0 */ + musb->endpoints[0].max_packet_sz_tx = MUSB_EP0_FIFOSIZE; + musb->endpoints[0].max_packet_sz_rx = MUSB_EP0_FIFOSIZE; + + /* discover endpoint configuration */ + musb->nr_endpoints = 1; + musb->epmask = 1; + + if (reg & MUSB_CONFIGDATA_DYNFIFO) { + if (musb->config->dyn_fifo) + status = ep_config_from_table(musb); + else { + ERR("reconfigure software for Dynamic FIFOs\n"); + status = -ENODEV; + } + } else { + if (!musb->config->dyn_fifo) + status = ep_config_from_hw(musb); + else { + ERR("reconfigure software for static FIFOs\n"); + return -ENODEV; + } + } + + if (status < 0) + return status; + + /* finish init, and print endpoint config */ + for (i = 0; i < musb->nr_endpoints; i++) { + struct musb_hw_ep *hw_ep = musb->endpoints + i; + + hw_ep->fifo = MUSB_FIFO_OFFSET(i) + mbase; +#ifdef CONFIG_USB_TUSB6010 + hw_ep->fifo_async = musb->async + 0x400 + MUSB_FIFO_OFFSET(i); + hw_ep->fifo_sync = musb->sync + 0x400 + MUSB_FIFO_OFFSET(i); + hw_ep->fifo_sync_va = + musb->sync_va + 0x400 + MUSB_FIFO_OFFSET(i); + + if (i == 0) + hw_ep->conf = mbase - 0x400 + TUSB_EP0_CONF; + else + hw_ep->conf = mbase + 0x400 + (((i - 1) & 0xf) << 2); +#endif + + hw_ep->regs = MUSB_EP_OFFSET(i, 0) + mbase; +#ifdef CONFIG_USB_MUSB_HDRC_HCD + hw_ep->target_regs = MUSB_BUSCTL_OFFSET(i, 0) + mbase; + hw_ep->rx_reinit = 1; + hw_ep->tx_reinit = 1; +#endif + + if (hw_ep->max_packet_sz_tx) { + printk(KERN_DEBUG + "%s: hw_ep %d%s, %smax %d\n", + musb_driver_name, i, + hw_ep->is_shared_fifo ? "shared" : "tx", + hw_ep->tx_double_buffered + ? "doublebuffer, " : "", + hw_ep->max_packet_sz_tx); + } + if (hw_ep->max_packet_sz_rx && !hw_ep->is_shared_fifo) { + printk(KERN_DEBUG + "%s: hw_ep %d%s, %smax %d\n", + musb_driver_name, i, + "rx", + hw_ep->rx_double_buffered + ? "doublebuffer, " : "", + hw_ep->max_packet_sz_rx); + } + if (!(hw_ep->max_packet_sz_tx || hw_ep->max_packet_sz_rx)) + DBG(1, "hw_ep %d not configured\n", i); + } + + return 0; +} + +/*-------------------------------------------------------------------------*/ + +#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430) + +static irqreturn_t generic_interrupt(int irq, void *__hci) +{ + unsigned long flags; + irqreturn_t retval = IRQ_NONE; + struct musb *musb = __hci; + + spin_lock_irqsave(&musb->lock, flags); + + musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB); + musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX); + musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX); + + if (musb->int_usb || musb->int_tx || musb->int_rx) + retval = musb_interrupt(musb); + + spin_unlock_irqrestore(&musb->lock, flags); + + /* REVISIT we sometimes get spurious IRQs on g_ep0 + * not clear why... + */ + if (retval != IRQ_HANDLED) + DBG(5, "spurious?\n"); + + return IRQ_HANDLED; +} + +#else +#define generic_interrupt NULL +#endif + +/* + * handle all the irqs defined by the HDRC core. for now we expect: other + * irq sources (phy, dma, etc) will be handled first, musb->int_* values + * will be assigned, and the irq will already have been acked. + * + * called in irq context with spinlock held, irqs blocked + */ +irqreturn_t musb_interrupt(struct musb *musb) +{ + irqreturn_t retval = IRQ_NONE; + u8 devctl, power; + int ep_num; + u32 reg; + + devctl = musb_readb(musb->mregs, MUSB_DEVCTL); + power = musb_readb(musb->mregs, MUSB_POWER); + + DBG(4, "** IRQ %s usb%04x tx%04x rx%04x\n", + (devctl & MUSB_DEVCTL_HM) ? "host" : "peripheral", + musb->int_usb, musb->int_tx, musb->int_rx); + + /* the core can interrupt us for multiple reasons; docs have + * a generic interrupt flowchart to follow + */ + if (musb->int_usb & STAGE0_MASK) + retval |= musb_stage0_irq(musb, musb->int_usb, + devctl, power); + + /* "stage 1" is handling endpoint irqs */ + + /* handle endpoint 0 first */ + if (musb->int_tx & 1) { + if (devctl & MUSB_DEVCTL_HM) + retval |= musb_h_ep0_irq(musb); + else + retval |= musb_g_ep0_irq(musb); + } + + /* RX on endpoints 1-15 */ + reg = musb->int_rx >> 1; + ep_num = 1; + while (reg) { + if (reg & 1) { + /* musb_ep_select(musb->mregs, ep_num); */ + /* REVISIT just retval = ep->rx_irq(...) */ + retval = IRQ_HANDLED; + if (devctl & MUSB_DEVCTL_HM) { + if (is_host_capable()) + musb_host_rx(musb, ep_num); + } else { + if (is_peripheral_capable()) + musb_g_rx(musb, ep_num); + } + } + + reg >>= 1; + ep_num++; + } + + /* TX on endpoints 1-15 */ + reg = musb->int_tx >> 1; + ep_num = 1; + while (reg) { + if (reg & 1) { + /* musb_ep_select(musb->mregs, ep_num); */ + /* REVISIT just retval |= ep->tx_irq(...) */ + retval = IRQ_HANDLED; + if (devctl & MUSB_DEVCTL_HM) { + if (is_host_capable()) + musb_host_tx(musb, ep_num); + } else { + if (is_peripheral_capable()) + musb_g_tx(musb, ep_num); + } + } + reg >>= 1; + ep_num++; + } + + /* finish handling "global" interrupts after handling fifos */ + if (musb->int_usb) + retval |= musb_stage2_irq(musb, + musb->int_usb, devctl, power); + + return retval; +} + + +#ifndef CONFIG_MUSB_PIO_ONLY +static int __initdata use_dma = 1; + +/* "modprobe ... use_dma=0" etc */ +module_param(use_dma, bool, 0); +MODULE_PARM_DESC(use_dma, "enable/disable use of DMA"); + +void musb_dma_completion(struct musb *musb, u8 epnum, u8 transmit) +{ + u8 devctl = musb_readb(musb->mregs, MUSB_DEVCTL); + + /* called with controller lock already held */ + + if (!epnum) { +#ifndef CONFIG_USB_TUSB_OMAP_DMA + if (!is_cppi_enabled()) { + /* endpoint 0 */ + if (devctl & MUSB_DEVCTL_HM) + musb_h_ep0_irq(musb); + else + musb_g_ep0_irq(musb); + } +#endif + } else { + /* endpoints 1..15 */ + if (transmit) { + if (devctl & MUSB_DEVCTL_HM) { + if (is_host_capable()) + musb_host_tx(musb, epnum); + } else { + if (is_peripheral_capable()) + musb_g_tx(musb, epnum); + } + } else { + /* receive */ + if (devctl & MUSB_DEVCTL_HM) { + if (is_host_capable()) + musb_host_rx(musb, epnum); + } else { + if (is_peripheral_capable()) + musb_g_rx(musb, epnum); + } + } + } +} + +#else +#define use_dma 0 +#endif + +/*-------------------------------------------------------------------------*/ + +#ifdef CONFIG_SYSFS + +static ssize_t +musb_mode_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct musb *musb = dev_to_musb(dev); + unsigned long flags; + int ret = -EINVAL; + + spin_lock_irqsave(&musb->lock, flags); + ret = sprintf(buf, "%s\n", otg_state_string(musb)); + spin_unlock_irqrestore(&musb->lock, flags); + + return ret; +} + +static ssize_t +musb_mode_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t n) +{ + struct musb *musb = dev_to_musb(dev); + unsigned long flags; + + spin_lock_irqsave(&musb->lock, flags); + if (!strncmp(buf, "host", 4)) + musb_platform_set_mode(musb, MUSB_HOST); + if (!strncmp(buf, "peripheral", 10)) + musb_platform_set_mode(musb, MUSB_PERIPHERAL); + if (!strncmp(buf, "otg", 3)) + musb_platform_set_mode(musb, MUSB_OTG); + spin_unlock_irqrestore(&musb->lock, flags); + + return n; +} +static DEVICE_ATTR(mode, 0644, musb_mode_show, musb_mode_store); + +static ssize_t +musb_vbus_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t n) +{ + struct musb *musb = dev_to_musb(dev); + unsigned long flags; + unsigned long val; + + if (sscanf(buf, "%lu", &val) < 1) { + printk(KERN_ERR "Invalid VBUS timeout ms value\n"); + return -EINVAL; + } + + spin_lock_irqsave(&musb->lock, flags); + musb->a_wait_bcon = val; + if (musb->xceiv.state == OTG_STATE_A_WAIT_BCON) + musb->is_active = 0; + musb_platform_try_idle(musb, jiffies + msecs_to_jiffies(val)); + spin_unlock_irqrestore(&musb->lock, flags); + + return n; +} + +static ssize_t +musb_vbus_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct musb *musb = dev_to_musb(dev); + unsigned long flags; + unsigned long val; + int vbus; + + spin_lock_irqsave(&musb->lock, flags); + val = musb->a_wait_bcon; + vbus = musb_platform_get_vbus_status(musb); + spin_unlock_irqrestore(&musb->lock, flags); + + return sprintf(buf, "Vbus %s, timeout %lu\n", + vbus ? "on" : "off", val); +} +static DEVICE_ATTR(vbus, 0644, musb_vbus_show, musb_vbus_store); + +#ifdef CONFIG_USB_GADGET_MUSB_HDRC + +/* Gadget drivers can't know that a host is connected so they might want + * to start SRP, but users can. This allows userspace to trigger SRP. + */ +static ssize_t +musb_srp_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t n) +{ + struct musb *musb = dev_to_musb(dev); + unsigned short srp; + + if (sscanf(buf, "%hu", &srp) != 1 + || (srp != 1)) { + printk(KERN_ERR "SRP: Value must be 1\n"); + return -EINVAL; + } + + if (srp == 1) + musb_g_wakeup(musb); + + return n; +} +static DEVICE_ATTR(srp, 0644, NULL, musb_srp_store); + +#endif /* CONFIG_USB_GADGET_MUSB_HDRC */ + +#endif /* sysfs */ + +/* Only used to provide driver mode change events */ +static void musb_irq_work(struct work_struct *data) +{ + struct musb *musb = container_of(data, struct musb, irq_work); + static int old_state; + + if (musb->xceiv.state != old_state) { + old_state = musb->xceiv.state; + sysfs_notify(&musb->controller->kobj, NULL, "mode"); + } +} + +/* -------------------------------------------------------------------------- + * Init support + */ + +static struct musb *__init +allocate_instance(struct device *dev, + struct musb_hdrc_config *config, void __iomem *mbase) +{ + struct musb *musb; + struct musb_hw_ep *ep; + int epnum; +#ifdef CONFIG_USB_MUSB_HDRC_HCD + struct usb_hcd *hcd; + + hcd = usb_create_hcd(&musb_hc_driver, dev, dev->bus_id); + if (!hcd) + return NULL; + /* usbcore sets dev->driver_data to hcd, and sometimes uses that... */ + + musb = hcd_to_musb(hcd); + INIT_LIST_HEAD(&musb->control); + INIT_LIST_HEAD(&musb->in_bulk); + INIT_LIST_HEAD(&musb->out_bulk); + + hcd->uses_new_polling = 1; + + musb->vbuserr_retry = VBUSERR_RETRY_COUNT; +#else + musb = kzalloc(sizeof *musb, GFP_KERNEL); + if (!musb) + return NULL; + dev_set_drvdata(dev, musb); + +#endif + + musb->mregs = mbase; + musb->ctrl_base = mbase; + musb->nIrq = -ENODEV; + musb->config = config; + for (epnum = 0, ep = musb->endpoints; + epnum < musb->config->num_eps; + epnum++, ep++) { + + ep->musb = musb; + ep->epnum = epnum; + } + + musb->controller = dev; + return musb; +} + +static void musb_free(struct musb *musb) +{ + /* this has multiple entry modes. it handles fault cleanup after + * probe(), where things may be partially set up, as well as rmmod + * cleanup after everything's been de-activated. + */ + +#ifdef CONFIG_SYSFS + device_remove_file(musb->controller, &dev_attr_mode); + device_remove_file(musb->controller, &dev_attr_vbus); +#ifdef CONFIG_USB_MUSB_OTG + device_remove_file(musb->controller, &dev_attr_srp); +#endif +#endif + +#ifdef CONFIG_USB_GADGET_MUSB_HDRC + musb_gadget_cleanup(musb); +#endif + + if (musb->nIrq >= 0) { + disable_irq_wake(musb->nIrq); + free_irq(musb->nIrq, musb); + } + if (is_dma_capable() && musb->dma_controller) { + struct dma_controller *c = musb->dma_controller; + + (void) c->stop(c); + dma_controller_destroy(c); + } + + musb_writeb(musb->mregs, MUSB_DEVCTL, 0); + musb_platform_exit(musb); + musb_writeb(musb->mregs, MUSB_DEVCTL, 0); + + if (musb->clock) { + clk_disable(musb->clock); + clk_put(musb->clock); + } + +#ifdef CONFIG_USB_MUSB_OTG + put_device(musb->xceiv.dev); +#endif + +#ifdef CONFIG_USB_MUSB_HDRC_HCD + usb_put_hcd(musb_to_hcd(musb)); +#else + kfree(musb); +#endif +} + +/* + * Perform generic per-controller initialization. + * + * @pDevice: the controller (already clocked, etc) + * @nIrq: irq + * @mregs: virtual address of controller registers, + * not yet corrected for platform-specific offsets + */ +static int __init +musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) +{ + int status; + struct musb *musb; + struct musb_hdrc_platform_data *plat = dev->platform_data; + + /* The driver might handle more features than the board; OK. + * Fail when the board needs a feature that's not enabled. + */ + if (!plat) { + dev_dbg(dev, "no platform_data?\n"); + return -ENODEV; + } + switch (plat->mode) { + case MUSB_HOST: +#ifdef CONFIG_USB_MUSB_HDRC_HCD + break; +#else + goto bad_config; +#endif + case MUSB_PERIPHERAL: +#ifdef CONFIG_USB_GADGET_MUSB_HDRC + break; +#else + goto bad_config; +#endif + case MUSB_OTG: +#ifdef CONFIG_USB_MUSB_OTG + break; +#else +bad_config: +#endif + default: + dev_err(dev, "incompatible Kconfig role setting\n"); + return -EINVAL; + } + + /* allocate */ + musb = allocate_instance(dev, plat->config, ctrl); + if (!musb) + return -ENOMEM; + + spin_lock_init(&musb->lock); + musb->board_mode = plat->mode; + musb->board_set_power = plat->set_power; + musb->set_clock = plat->set_clock; + musb->min_power = plat->min_power; + + /* Clock usage is chip-specific ... functional clock (DaVinci, + * OMAP2430), or PHY ref (some TUSB6010 boards). All this core + * code does is make sure a clock handle is available; platform + * code manages it during start/stop and suspend/resume. + */ + if (plat->clock) { + musb->clock = clk_get(dev, plat->clock); + if (IS_ERR(musb->clock)) { + status = PTR_ERR(musb->clock); + musb->clock = NULL; + goto fail; + } + } + + /* assume vbus is off */ + + /* platform adjusts musb->mregs and musb->isr if needed, + * and activates clocks + */ + musb->isr = generic_interrupt; + status = musb_platform_init(musb); + + if (status < 0) + goto fail; + if (!musb->isr) { + status = -ENODEV; + goto fail2; + } + +#ifndef CONFIG_MUSB_PIO_ONLY + if (use_dma && dev->dma_mask) { + struct dma_controller *c; + + c = dma_controller_create(musb, musb->mregs); + musb->dma_controller = c; + if (c) + (void) c->start(c); + } +#endif + /* ideally this would be abstracted in platform setup */ + if (!is_dma_capable() || !musb->dma_controller) + dev->dma_mask = NULL; + + /* be sure interrupts are disabled before connecting ISR */ + musb_platform_disable(musb); + musb_generic_disable(musb); + + /* setup musb parts of the core (especially endpoints) */ + status = musb_core_init(plat->config->multipoint + ? MUSB_CONTROLLER_MHDRC + : MUSB_CONTROLLER_HDRC, musb); + if (status < 0) + goto fail2; + + /* Init IRQ workqueue before request_irq */ + INIT_WORK(&musb->irq_work, musb_irq_work); + + /* attach to the IRQ */ + if (request_irq(nIrq, musb->isr, 0, dev->bus_id, musb)) { + dev_err(dev, "request_irq %d failed!\n", nIrq); + status = -ENODEV; + goto fail2; + } + musb->nIrq = nIrq; +/* FIXME this handles wakeup irqs wrong */ + if (enable_irq_wake(nIrq) == 0) + device_init_wakeup(dev, 1); + + pr_info("%s: USB %s mode controller at %p using %s, IRQ %d\n", + musb_driver_name, + ({char *s; + switch (musb->board_mode) { + case MUSB_HOST: s = "Host"; break; + case MUSB_PERIPHERAL: s = "Peripheral"; break; + default: s = "OTG"; break; + }; s; }), + ctrl, + (is_dma_capable() && musb->dma_controller) + ? "DMA" : "PIO", + musb->nIrq); + +#ifdef CONFIG_USB_MUSB_HDRC_HCD + /* host side needs more setup, except for no-host modes */ + if (musb->board_mode != MUSB_PERIPHERAL) { + struct usb_hcd *hcd = musb_to_hcd(musb); + + if (musb->board_mode == MUSB_OTG) + hcd->self.otg_port = 1; + musb->xceiv.host = &hcd->self; + hcd->power_budget = 2 * (plat->power ? : 250); + } +#endif /* CONFIG_USB_MUSB_HDRC_HCD */ + + /* For the host-only role, we can activate right away. + * (We expect the ID pin to be forcibly grounded!!) + * Otherwise, wait till the gadget driver hooks up. + */ + if (!is_otg_enabled(musb) && is_host_enabled(musb)) { + MUSB_HST_MODE(musb); + musb->xceiv.default_a = 1; + musb->xceiv.state = OTG_STATE_A_IDLE; + + status = usb_add_hcd(musb_to_hcd(musb), -1, 0); + + DBG(1, "%s mode, status %d, devctl %02x %c\n", + "HOST", status, + musb_readb(musb->mregs, MUSB_DEVCTL), + (musb_readb(musb->mregs, MUSB_DEVCTL) + & MUSB_DEVCTL_BDEVICE + ? 'B' : 'A')); + + } else /* peripheral is enabled */ { + MUSB_DEV_MODE(musb); + musb->xceiv.default_a = 0; + musb->xceiv.state = OTG_STATE_B_IDLE; + + status = musb_gadget_setup(musb); + + DBG(1, "%s mode, status %d, dev%02x\n", + is_otg_enabled(musb) ? "OTG" : "PERIPHERAL", + status, + musb_readb(musb->mregs, MUSB_DEVCTL)); + + } + + if (status == 0) + musb_debug_create("driver/musb_hdrc", musb); + else { +fail: + if (musb->clock) + clk_put(musb->clock); + device_init_wakeup(dev, 0); + musb_free(musb); + return status; + } + +#ifdef CONFIG_SYSFS + status = device_create_file(dev, &dev_attr_mode); + status = device_create_file(dev, &dev_attr_vbus); +#ifdef CONFIG_USB_GADGET_MUSB_HDRC + status = device_create_file(dev, &dev_attr_srp); +#endif /* CONFIG_USB_GADGET_MUSB_HDRC */ + status = 0; +#endif + + return status; + +fail2: + musb_platform_exit(musb); + goto fail; +} + +/*-------------------------------------------------------------------------*/ + +/* all implementations (PCI bridge to FPGA, VLYNQ, etc) should just + * bridge to a platform device; this driver then suffices. + */ + +#ifndef CONFIG_MUSB_PIO_ONLY +static u64 *orig_dma_mask; +#endif + +static int __init musb_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + int irq = platform_get_irq(pdev, 0); + struct resource *iomem; + void __iomem *base; + + iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!iomem || irq == 0) + return -ENODEV; + + base = ioremap(iomem->start, iomem->end - iomem->start + 1); + if (!base) { + dev_err(dev, "ioremap failed\n"); + return -ENOMEM; + } + +#ifndef CONFIG_MUSB_PIO_ONLY + /* clobbered by use_dma=n */ + orig_dma_mask = dev->dma_mask; +#endif + return musb_init_controller(dev, irq, base); +} + +static int __devexit musb_remove(struct platform_device *pdev) +{ + struct musb *musb = dev_to_musb(&pdev->dev); + void __iomem *ctrl_base = musb->ctrl_base; + + /* this gets called on rmmod. + * - Host mode: host may still be active + * - Peripheral mode: peripheral is deactivated (or never-activated) + * - OTG mode: both roles are deactivated (or never-activated) + */ + musb_shutdown(pdev); + musb_debug_delete("driver/musb_hdrc", musb); +#ifdef CONFIG_USB_MUSB_HDRC_HCD + if (musb->board_mode == MUSB_HOST) + usb_remove_hcd(musb_to_hcd(musb)); +#endif + musb_free(musb); + iounmap(ctrl_base); + device_init_wakeup(&pdev->dev, 0); +#ifndef CONFIG_MUSB_PIO_ONLY + pdev->dev.dma_mask = orig_dma_mask; +#endif + return 0; +} + +#ifdef CONFIG_PM + +static int musb_suspend(struct platform_device *pdev, pm_message_t message) +{ + unsigned long flags; + struct musb *musb = dev_to_musb(&pdev->dev); + + if (!musb->clock) + return 0; + + spin_lock_irqsave(&musb->lock, flags); + + if (is_peripheral_active(musb)) { + /* FIXME force disconnect unless we know USB will wake + * the system up quickly enough to respond ... + */ + } else if (is_host_active(musb)) { + /* we know all the children are suspended; sometimes + * they will even be wakeup-enabled. + */ + } + + if (musb->set_clock) + musb->set_clock(musb->clock, 0); + else + clk_disable(musb->clock); + spin_unlock_irqrestore(&musb->lock, flags); + return 0; +} + +static int musb_resume(struct platform_device *pdev) +{ + unsigned long flags; + struct musb *musb = dev_to_musb(&pdev->dev); + + if (!musb->clock) + return 0; + + spin_lock_irqsave(&musb->lock, flags); + + if (musb->set_clock) + musb->set_clock(musb->clock, 1); + else + clk_enable(musb->clock); + + /* for static cmos like DaVinci, register values were preserved + * unless for some reason the whole soc powered down and we're + * not treating that as a whole-system restart (e.g. swsusp) + */ + spin_unlock_irqrestore(&musb->lock, flags); + return 0; +} + +#else +#define musb_suspend NULL +#define musb_resume NULL +#endif + +static struct platform_driver musb_driver = { + .driver = { + .name = (char *)musb_driver_name, + .bus = &platform_bus_type, + .owner = THIS_MODULE, + }, + .remove = __devexit_p(musb_remove), + .shutdown = musb_shutdown, + .suspend = musb_suspend, + .resume = musb_resume, +}; + +/*-------------------------------------------------------------------------*/ + +static int __init musb_init(void) +{ +#ifdef CONFIG_USB_MUSB_HDRC_HCD + if (usb_disabled()) + return 0; +#endif + + pr_info("%s: version " MUSB_VERSION ", " +#ifdef CONFIG_MUSB_PIO_ONLY + "pio" +#elif defined(CONFIG_USB_TI_CPPI_DMA) + "cppi-dma" +#elif defined(CONFIG_USB_INVENTRA_DMA) + "musb-dma" +#elif defined(CONFIG_USB_TUSB_OMAP_DMA) + "tusb-omap-dma" +#else + "?dma?" +#endif + ", " +#ifdef CONFIG_USB_MUSB_OTG + "otg (peripheral+host)" +#elif defined(CONFIG_USB_GADGET_MUSB_HDRC) + "peripheral" +#elif defined(CONFIG_USB_MUSB_HDRC_HCD) + "host" +#endif + ", debug=%d\n", + musb_driver_name, debug); + return platform_driver_probe(&musb_driver, musb_probe); +} + +/* make us init after usbcore and before usb + * gadget and host-side drivers start to register + */ +subsys_initcall(musb_init); + +static void __exit musb_cleanup(void) +{ + platform_driver_unregister(&musb_driver); +} +module_exit(musb_cleanup); |