diff options
Diffstat (limited to 'drivers/usb/musb/davinci.c')
| -rw-r--r-- | drivers/usb/musb/davinci.c | 91 |
1 files changed, 52 insertions, 39 deletions
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c index 0d566dc5ce0..10d11ab113a 100644 --- a/drivers/usb/musb/davinci.c +++ b/drivers/usb/musb/davinci.c @@ -32,9 +32,10 @@ #include <linux/io.h> #include <linux/gpio.h> -#include <mach/arch/hardware.h> -#include <mach/arch/memory.h> -#include <mach/arch/gpio.h> +#include <mach/hardware.h> +#include <mach/memory.h> +#include <mach/gpio.h> + #include <asm/mach-types.h> #include "musb_core.h" @@ -47,6 +48,9 @@ #include "cppi_dma.h" +#define USB_PHY_CTRL IO_ADDRESS(USBPHY_CTL_PADDR) +#define DM355_DEEPSLEEP IO_ADDRESS(DM355_DEEPSLEEP_PADDR) + /* REVISIT (PM) we should be able to keep the PHY in low power mode most * of the time (24 MHZ oscillator and PLL off, etc) by setting POWER.D0 * and, when in host mode, autosuspending idle root ports... PHYPLLON @@ -55,20 +59,26 @@ static inline void phy_on(void) { - /* start the on-chip PHY and its PLL */ - __raw_writel(USBPHY_SESNDEN | USBPHY_VBDTCTEN | USBPHY_PHYPLLON, - (void __force __iomem *) IO_ADDRESS(USBPHY_CTL_PADDR)); - while ((__raw_readl((void __force __iomem *) - IO_ADDRESS(USBPHY_CTL_PADDR)) - & USBPHY_PHYCLKGD) == 0) + u32 phy_ctrl = __raw_readl(USB_PHY_CTRL); + + /* power everything up; start the on-chip PHY and its PLL */ + phy_ctrl &= ~(USBPHY_OSCPDWN | USBPHY_OTGPDWN | USBPHY_PHYPDWN); + phy_ctrl |= USBPHY_SESNDEN | USBPHY_VBDTCTEN | USBPHY_PHYPLLON; + __raw_writel(phy_ctrl, USB_PHY_CTRL); + + /* wait for PLL to lock before proceeding */ + while ((__raw_readl(USB_PHY_CTRL) & USBPHY_PHYCLKGD) == 0) cpu_relax(); } static inline void phy_off(void) { - /* powerdown the on-chip PHY and its oscillator */ - __raw_writel(USBPHY_OSCPDWN | USBPHY_PHYPDWN, (void __force __iomem *) - IO_ADDRESS(USBPHY_CTL_PADDR)); + u32 phy_ctrl = __raw_readl(USB_PHY_CTRL); + + /* powerdown the on-chip PHY, its PLL, and the OTG block */ + phy_ctrl &= ~(USBPHY_SESNDEN | USBPHY_VBDTCTEN | USBPHY_PHYPLLON); + phy_ctrl |= USBPHY_OSCPDWN | USBPHY_OTGPDWN | USBPHY_PHYPDWN; + __raw_writel(phy_ctrl, USB_PHY_CTRL); } static int dma_off = 1; @@ -125,10 +135,6 @@ void musb_platform_disable(struct musb *musb) } -/* REVISIT it's not clear whether DaVinci can support full OTG. */ - -static int vbus_state = -1; - #ifdef CONFIG_USB_MUSB_HDRC_HCD #define portstate(stmt) stmt #else @@ -136,10 +142,19 @@ static int vbus_state = -1; #endif -/* VBUS SWITCHING IS BOARD-SPECIFIC */ +/* + * VBUS SWITCHING IS BOARD-SPECIFIC ... at least for the DM6446 EVM, + * which doesn't wire DRVVBUS to the FET that switches it. Unclear + * if that's a problem with the DM6446 chip or just with that board. + * + * In either case, the DM355 EVM automates DRVVBUS the normal way, + * when J10 is out, and TI documents it as handling OTG. + */ #ifdef CONFIG_MACH_DAVINCI_EVM +static int vbus_state = -1; + /* I2C operations are always synchronous, and require a task context. * With unloaded systems, using the shared workqueue seems to suffice * to satisfy the 100msec A_WAIT_VRISE timeout... @@ -149,12 +164,12 @@ static void evm_deferred_drvvbus(struct work_struct *ignored) gpio_set_value_cansleep(GPIO_nVBUS_DRV, vbus_state); vbus_state = !vbus_state; } -static DECLARE_WORK(evm_vbus_work, evm_deferred_drvvbus); #endif /* EVM */ static void davinci_source_power(struct musb *musb, int is_on, int immediate) { +#ifdef CONFIG_MACH_DAVINCI_EVM if (is_on) is_on = 1; @@ -162,16 +177,17 @@ static void davinci_source_power(struct musb *musb, int is_on, int immediate) return; vbus_state = !is_on; /* 0/1 vs "-1 == unknown/init" */ -#ifdef CONFIG_MACH_DAVINCI_EVM if (machine_is_davinci_evm()) { + static DECLARE_WORK(evm_vbus_work, evm_deferred_drvvbus); + if (immediate) gpio_set_value_cansleep(GPIO_nVBUS_DRV, vbus_state); else schedule_work(&evm_vbus_work); } -#endif if (immediate) vbus_state = is_on; +#endif } static void davinci_set_vbus(struct musb *musb, int is_on) @@ -370,30 +386,14 @@ int musb_platform_set_mode(struct musb *musb, u8 mode) return -EIO; } -int musb_platform_set_mode(struct musb *musb, u8 mode) -{ - /* EVM can't do this (right?) */ - return -EIO; -} - int __init musb_platform_init(struct musb *musb) { void __iomem *tibase = musb->ctrl_base; u32 revision; musb->mregs += DAVINCI_BASE_OFFSET; -#if 0 - /* REVISIT there's something odd about clocking, this - * didn't appear do the job ... - */ - musb->clock = clk_get(pDevice, "usb"); - if (IS_ERR(musb->clock)) - return PTR_ERR(musb->clock); - status = clk_enable(musb->clock); - if (status < 0) - return -ENODEV; -#endif + clk_enable(musb->clock); /* returns zero if e.g. not clocked */ revision = musb_readl(tibase, DAVINCI_USB_VERSION_REG); @@ -406,6 +406,17 @@ int __init musb_platform_init(struct musb *musb) musb->board_set_vbus = davinci_set_vbus; davinci_source_power(musb, 0, 1); + /* dm355 EVM swaps D+/D- for signal integrity, and + * is clocked from the main 24 MHz crystal. + */ + if (machine_is_davinci_dm355_evm()) { + u32 phy_ctrl = __raw_readl(USB_PHY_CTRL); + + phy_ctrl &= ~(3 << 9); + phy_ctrl |= USBPHY_DATAPOL; + __raw_writel(phy_ctrl, USB_PHY_CTRL); + } + /* reset the controller */ musb_writel(tibase, DAVINCI_USB_CTRL_REG, 0x1); @@ -416,8 +427,7 @@ int __init musb_platform_init(struct musb *musb) /* NOTE: irqs are in mixed mode, not bypass to pure-musb */ pr_debug("DaVinci OTG revision %08x phy %03x control %02x\n", - revision, __raw_readl((void __force __iomem *) - IO_ADDRESS(USBPHY_CTL_PADDR)), + revision, __raw_readl(USB_PHY_CTRL), musb_readb(tibase, DAVINCI_USB_CTRL_REG)); musb->isr = davinci_interrupt; @@ -458,5 +468,8 @@ int musb_platform_exit(struct musb *musb) } phy_off(); + + clk_disable(musb->clock); + return 0; } |