aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/input
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/input')
-rw-r--r--drivers/usb/input/Kconfig24
-rw-r--r--drivers/usb/input/Makefile2
-rw-r--r--drivers/usb/input/acecad.c285
-rw-r--r--drivers/usb/input/aiptek.c32
-rw-r--r--drivers/usb/input/ati_remote.c247
-rw-r--r--drivers/usb/input/hid-core.c26
-rw-r--r--drivers/usb/input/hid-debug.h16
-rw-r--r--drivers/usb/input/hid-input.c16
-rw-r--r--drivers/usb/input/hid-lgff.c18
-rw-r--r--drivers/usb/input/hid.h18
-rw-r--r--drivers/usb/input/hiddev.c56
-rw-r--r--drivers/usb/input/itmtouch.c268
-rw-r--r--drivers/usb/input/kbtab.c17
-rw-r--r--drivers/usb/input/mtouchusb.c410
-rw-r--r--drivers/usb/input/powermate.c30
-rw-r--r--drivers/usb/input/touchkitusb.c11
-rw-r--r--drivers/usb/input/usbkbd.c29
-rw-r--r--drivers/usb/input/usbmouse.c31
-rw-r--r--drivers/usb/input/wacom.c398
-rw-r--r--drivers/usb/input/xpad.c75
20 files changed, 1230 insertions, 779 deletions
diff --git a/drivers/usb/input/Kconfig b/drivers/usb/input/Kconfig
index d28e7eab6f9..fd59f6bdd67 100644
--- a/drivers/usb/input/Kconfig
+++ b/drivers/usb/input/Kconfig
@@ -151,6 +151,18 @@ config USB_WACOM
To compile this driver as a module, choose M here: the
module will be called wacom.
+config USB_ACECAD
+ tristate "Acecad Flair tablet support"
+ depends on USB && INPUT
+ help
+ Say Y here if you want to use the USB version of the Acecad Flair
+ tablet. Make sure to say Y to "Mouse support"
+ (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
+ (CONFIG_INPUT_EVDEV) as well.
+
+ To compile this driver as a module, choose M here: the
+ module will be called acecad.
+
config USB_KBTAB
tristate "KB Gear JamStudio tablet support"
depends on USB && INPUT
@@ -190,6 +202,18 @@ config USB_MTOUCH
To compile this driver as a module, choose M here: the
module will be called mtouchusb.
+config USB_ITMTOUCH
+ tristate "ITM Touch USB Touchscreen Driver"
+ depends on USB && INPUT
+ ---help---
+ Say Y here if you want to use a ITM Touch USB
+ Touchscreen controller.
+
+ This touchscreen is used in LG 1510SF monitors.
+
+ To compile this driver as a module, choose M here: the
+ module will be called itmtouch.
+
config USB_EGALAX
tristate "eGalax TouchKit USB Touchscreen Driver"
depends on USB && INPUT
diff --git a/drivers/usb/input/Makefile b/drivers/usb/input/Makefile
index 6bcedd16b0a..831b2b0f1f0 100644
--- a/drivers/usb/input/Makefile
+++ b/drivers/usb/input/Makefile
@@ -33,7 +33,9 @@ obj-$(CONFIG_USB_KBD) += usbkbd.o
obj-$(CONFIG_USB_KBTAB) += kbtab.o
obj-$(CONFIG_USB_MOUSE) += usbmouse.o
obj-$(CONFIG_USB_MTOUCH) += mtouchusb.o
+obj-$(CONFIG_USB_ITMTOUCH) += itmtouch.o
obj-$(CONFIG_USB_EGALAX) += touchkitusb.o
obj-$(CONFIG_USB_POWERMATE) += powermate.o
obj-$(CONFIG_USB_WACOM) += wacom.o
+obj-$(CONFIG_USB_ACECAD) += acecad.o
obj-$(CONFIG_USB_XPAD) += xpad.o
diff --git a/drivers/usb/input/acecad.c b/drivers/usb/input/acecad.c
new file mode 100644
index 00000000000..ebcf7c95580
--- /dev/null
+++ b/drivers/usb/input/acecad.c
@@ -0,0 +1,285 @@
+/*
+ * Copyright (c) 2001-2005 Edouard TISSERANT <edouard.tisserant@wanadoo.fr>
+ * Copyright (c) 2004-2005 Stephane VOLTZ <svoltz@numericable.fr>
+ *
+ * USB Acecad "Acecad Flair" tablet support
+ *
+ * Changelog:
+ * v3.2 - Added sysfs support
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/usb.h>
+
+/*
+ * Version Information
+ */
+#define DRIVER_VERSION "v3.2"
+#define DRIVER_DESC "USB Acecad Flair tablet driver"
+#define DRIVER_LICENSE "GPL"
+#define DRIVER_AUTHOR "Edouard TISSERANT <edouard.tisserant@wanadoo.fr>"
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE(DRIVER_LICENSE);
+
+#define USB_VENDOR_ID_ACECAD 0x0460
+#define USB_DEVICE_ID_FLAIR 0x0004
+#define USB_DEVICE_ID_302 0x0008
+
+struct usb_acecad {
+ char name[128];
+ char phys[64];
+ struct usb_device *usbdev;
+ struct input_dev dev;
+ struct urb *irq;
+
+ signed char *data;
+ dma_addr_t data_dma;
+};
+
+static void usb_acecad_irq(struct urb *urb, struct pt_regs *regs)
+{
+ struct usb_acecad *acecad = urb->context;
+ unsigned char *data = acecad->data;
+ struct input_dev *dev = &acecad->dev;
+ int prox, status;
+
+ switch (urb->status) {
+ case 0:
+ /* success */
+ break;
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ /* this urb is terminated, clean up */
+ dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status);
+ return;
+ default:
+ dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status);
+ goto resubmit;
+ }
+
+ prox = (data[0] & 0x04) >> 2;
+ input_report_key(dev, BTN_TOOL_PEN, prox);
+
+ if (prox) {
+ int x = data[1] | (data[2] << 8);
+ int y = data[3] | (data[4] << 8);
+ /*Pressure should compute the same way for flair and 302*/
+ int pressure = data[5] | ((int)data[6] << 8);
+ int touch = data[0] & 0x01;
+ int stylus = (data[0] & 0x10) >> 4;
+ int stylus2 = (data[0] & 0x20) >> 5;
+ input_report_abs(dev, ABS_X, x);
+ input_report_abs(dev, ABS_Y, y);
+ input_report_abs(dev, ABS_PRESSURE, pressure);
+ input_report_key(dev, BTN_TOUCH, touch);
+ input_report_key(dev, BTN_STYLUS, stylus);
+ input_report_key(dev, BTN_STYLUS2, stylus2);
+ }
+
+ /* event termination */
+ input_sync(dev);
+
+resubmit:
+ status = usb_submit_urb (urb, GFP_ATOMIC);
+ if (status)
+ err ("can't resubmit intr, %s-%s/input0, status %d",
+ acecad->usbdev->bus->bus_name, acecad->usbdev->devpath, status);
+}
+
+static int usb_acecad_open(struct input_dev *dev)
+{
+ struct usb_acecad *acecad = dev->private;
+
+ acecad->irq->dev = acecad->usbdev;
+ if (usb_submit_urb(acecad->irq, GFP_KERNEL))
+ return -EIO;
+
+ return 0;
+}
+
+static void usb_acecad_close(struct input_dev *dev)
+{
+ struct usb_acecad *acecad = dev->private;
+
+ usb_kill_urb(acecad->irq);
+}
+
+static int usb_acecad_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+ struct usb_device *dev = interface_to_usbdev(intf);
+ struct usb_host_interface *interface = intf->cur_altsetting;
+ struct usb_endpoint_descriptor *endpoint;
+ struct usb_acecad *acecad;
+ int pipe, maxp;
+ char path[64];
+
+ if (interface->desc.bNumEndpoints != 1)
+ return -ENODEV;
+
+ endpoint = &interface->endpoint[0].desc;
+
+ if (!(endpoint->bEndpointAddress & 0x80))
+ return -ENODEV;
+
+ if ((endpoint->bmAttributes & 3) != 3)
+ return -ENODEV;
+
+ pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress);
+ maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe));
+
+ acecad = kcalloc(1, sizeof(struct usb_acecad), GFP_KERNEL);
+ if (!acecad)
+ return -ENOMEM;
+
+ acecad->data = usb_buffer_alloc(dev, 8, SLAB_KERNEL, &acecad->data_dma);
+ if (!acecad->data)
+ goto fail1;
+
+ acecad->irq = usb_alloc_urb(0, GFP_KERNEL);
+ if (!acecad->irq)
+ goto fail2;
+
+ if (dev->manufacturer)
+ strlcpy(acecad->name, dev->manufacturer, sizeof(acecad->name));
+
+ if (dev->product) {
+ if (dev->manufacturer)
+ strlcat(acecad->name, " ", sizeof(acecad->name));
+ strlcat(acecad->name, dev->product, sizeof(acecad->name));
+ }
+
+ usb_make_path(dev, path, sizeof(path));
+ snprintf(acecad->phys, sizeof(acecad->phys), "%s/input0", path);
+
+ acecad->usbdev = dev;
+
+ acecad->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ acecad->dev.absbit[0] = BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE);
+ acecad->dev.keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE);
+ acecad->dev.keybit[LONG(BTN_DIGI)] = BIT(BTN_TOOL_PEN) |BIT(BTN_TOUCH) | BIT(BTN_STYLUS) | BIT(BTN_STYLUS2);
+
+ switch (id->driver_info) {
+ case 0:
+ acecad->dev.absmax[ABS_X] = 5000;
+ acecad->dev.absmax[ABS_Y] = 3750;
+ acecad->dev.absmax[ABS_PRESSURE] = 512;
+ if (!strlen(acecad->name))
+ snprintf(acecad->name, sizeof(acecad->name),
+ "USB Acecad Flair Tablet %04x:%04x",
+ dev->descriptor.idVendor, dev->descriptor.idProduct);
+ break;
+ case 1:
+ acecad->dev.absmax[ABS_X] = 3000;
+ acecad->dev.absmax[ABS_Y] = 2250;
+ acecad->dev.absmax[ABS_PRESSURE] = 1024;
+ if (!strlen(acecad->name))
+ snprintf(acecad->name, sizeof(acecad->name),
+ "USB Acecad 302 Tablet %04x:%04x",
+ dev->descriptor.idVendor, dev->descriptor.idProduct);
+ break;
+ }
+
+ acecad->dev.absfuzz[ABS_X] = 4;
+ acecad->dev.absfuzz[ABS_Y] = 4;
+
+ acecad->dev.private = acecad;
+ acecad->dev.open = usb_acecad_open;
+ acecad->dev.close = usb_acecad_close;
+
+ acecad->dev.name = acecad->name;
+ acecad->dev.phys = acecad->phys;
+ acecad->dev.id.bustype = BUS_USB;
+ acecad->dev.id.vendor = le16_to_cpu(dev->descriptor.idVendor);
+ acecad->dev.id.product = le16_to_cpu(dev->descriptor.idProduct);
+ acecad->dev.id.version = le16_to_cpu(dev->descriptor.bcdDevice);
+ acecad->dev.dev = &intf->dev;
+
+ usb_fill_int_urb(acecad->irq, dev, pipe,
+ acecad->data, maxp > 8 ? 8 : maxp,
+ usb_acecad_irq, acecad, endpoint->bInterval);
+ acecad->irq->transfer_dma = acecad->data_dma;
+ acecad->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+ input_register_device(&acecad->dev);
+
+ printk(KERN_INFO "input: %s with packet size %d on %s\n",
+ acecad->name, maxp, path);
+
+ usb_set_intfdata(intf, acecad);
+
+ return 0;
+
+ fail2: usb_buffer_free(dev, 8, acecad->data, acecad->data_dma);
+ fail1: kfree(acecad);
+ return -ENOMEM;
+}
+
+static void usb_acecad_disconnect(struct usb_interface *intf)
+{
+ struct usb_acecad *acecad = usb_get_intfdata(intf);
+
+ usb_set_intfdata(intf, NULL);
+ if (acecad) {
+ usb_kill_urb(acecad->irq);
+ input_unregister_device(&acecad->dev);
+ usb_free_urb(acecad->irq);
+ usb_buffer_free(interface_to_usbdev(intf), 10, acecad->data, acecad->data_dma);
+ kfree(acecad);
+ }
+}
+
+static struct usb_device_id usb_acecad_id_table [] = {
+ { USB_DEVICE(USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_FLAIR), .driver_info = 0 },
+ { USB_DEVICE(USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_302), .driver_info = 1 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(usb, usb_acecad_id_table);
+
+static struct usb_driver usb_acecad_driver = {
+ .owner = THIS_MODULE,
+ .name = "usb_acecad",
+ .probe = usb_acecad_probe,
+ .disconnect = usb_acecad_disconnect,
+ .id_table = usb_acecad_id_table,
+};
+
+static int __init usb_acecad_init(void)
+{
+ int result = usb_register(&usb_acecad_driver);
+ if (result == 0)
+ info(DRIVER_VERSION ":" DRIVER_DESC);
+ return result;
+}
+
+static void __exit usb_acecad_exit(void)
+{
+ usb_deregister(&usb_acecad_driver);
+}
+
+module_init(usb_acecad_init);
+module_exit(usb_acecad_exit);
diff --git a/drivers/usb/input/aiptek.c b/drivers/usb/input/aiptek.c
index e991f7ed733..6bb0f25e8e9 100644
--- a/drivers/usb/input/aiptek.c
+++ b/drivers/usb/input/aiptek.c
@@ -1,7 +1,7 @@
/*
* Native support for the Aiptek HyperPen USB Tablets
* (4000U/5000U/6000U/8000U/12000U)
- *
+ *
* Copyright (c) 2001 Chris Atenasio <chris@crud.net>
* Copyright (c) 2002-2004 Bryan W. Headley <bwheadley@earthlink.net>
*
@@ -31,7 +31,7 @@
* - Added support for the sysfs interface, deprecating the
* procfs interface for 2.5.x kernel. Also added support for
* Wheel command. Bryan W. Headley July-15-2003.
- * v1.2 - Reworked jitter timer as a kernel thread.
+ * v1.2 - Reworked jitter timer as a kernel thread.
* Bryan W. Headley November-28-2003/Jan-10-2004.
* v1.3 - Repaired issue of kernel thread going nuts on single-processor
* machines, introduced programmableDelay as a command line
@@ -49,10 +49,10 @@
* NOTE:
* This kernel driver is augmented by the "Aiptek" XFree86 input
* driver for your X server, as well as the Gaiptek GUI Front-end
- * "Tablet Manager".
- * These three products are highly interactive with one another,
+ * "Tablet Manager".
+ * These three products are highly interactive with one another,
* so therefore it's easier to document them all as one subsystem.
- * Please visit the project's "home page", located at,
+ * Please visit the project's "home page", located at,
* http://aiptektablet.sourceforge.net.
*
* This program is free software; you can redistribute it and/or modify
@@ -156,7 +156,7 @@
* Command/Data Description Return Bytes Return Value
* 0x10/0x00 SwitchToMouse 0
* 0x10/0x01 SwitchToTablet 0
- * 0x18/0x04 SetResolution 0
+ * 0x18/0x04 SetResolution 0
* 0x12/0xFF AutoGainOn 0
* 0x17/0x00 FilterOn 0
* 0x01/0x00 GetXExtension 2 MaxX
@@ -247,7 +247,7 @@
#define AIPTEK_DIAGNOSTIC_SENDING_ABSOLUTE_IN_RELATIVE 2
#define AIPTEK_DIAGNOSTIC_TOOL_DISALLOWED 3
- /* Time to wait (in ms) to help mask hand jittering
+ /* Time to wait (in ms) to help mask hand jittering
* when pressing the stylus buttons.
*/
#define AIPTEK_JITTER_DELAY_DEFAULT 50
@@ -324,7 +324,6 @@ struct aiptek {
struct aiptek_settings curSetting; /* tablet's current programmable */
struct aiptek_settings newSetting; /* ... and new param settings */
unsigned int ifnum; /* interface number for IO */
- int openCount; /* module use counter */
int diagnostic; /* tablet diagnostic codes */
unsigned long eventCount; /* event count */
int inDelay; /* jitter: in jitter delay? */
@@ -791,7 +790,7 @@ exit:
* specific Aiptek model numbers, because there has been overlaps,
* use, and reuse of id's in existing models. Certain models have
* been known to use more than one ID, indicative perhaps of
- * manufacturing revisions. In any event, we consider these
+ * manufacturing revisions. In any event, we consider these
* IDs to not be model-specific nor unique.
*/
static const struct usb_device_id aiptek_ids[] = {
@@ -814,15 +813,9 @@ static int aiptek_open(struct input_dev *inputdev)
{
struct aiptek *aiptek = inputdev->private;
- if (aiptek->openCount++ > 0) {
- return 0;
- }
-
aiptek->urb->dev = aiptek->usbdev;
- if (usb_submit_urb(aiptek->urb, GFP_KERNEL) != 0) {
- aiptek->openCount--;
+ if (usb_submit_urb(aiptek->urb, GFP_KERNEL) != 0)
return -EIO;
- }
return 0;
}
@@ -834,13 +827,11 @@ static void aiptek_close(struct input_dev *inputdev)
{
struct aiptek *aiptek = inputdev->private;
- if (--aiptek->openCount == 0) {
- usb_kill_urb(aiptek->urb);
- }
+ usb_kill_urb(aiptek->urb);
}
/***********************************************************************
- * aiptek_set_report and aiptek_get_report() are borrowed from Linux 2.4.x,
+ * aiptek_set_report and aiptek_get_report() are borrowed from Linux 2.4.x,
* where they were known as usb_set_report and usb_get_report.
*/
static int
@@ -2252,7 +2243,6 @@ static void aiptek_disconnect(struct usb_interface *intf)
AIPTEK_PACKET_LENGTH,
aiptek->data, aiptek->data_dma);
kfree(aiptek);
- aiptek = NULL;
}
}
diff --git a/drivers/usb/input/ati_remote.c b/drivers/usb/input/ati_remote.c
index 860df26323b..db95c975952 100644
--- a/drivers/usb/input/ati_remote.c
+++ b/drivers/usb/input/ati_remote.c
@@ -1,15 +1,15 @@
-/*
+/*
* USB ATI Remote support
*
* Version 2.2.0 Copyright (c) 2004 Torrey Hoffman <thoffman@arnor.net>
* Version 2.1.1 Copyright (c) 2002 Vladimir Dergachev
*
* This 2.2.0 version is a rewrite / cleanup of the 2.1.1 driver, including
- * porting to the 2.6 kernel interfaces, along with other modification
+ * porting to the 2.6 kernel interfaces, along with other modification
* to better match the style of the existing usb/input drivers. However, the
* protocol and hardware handling is essentially unchanged from 2.1.1.
- *
- * The 2.1.1 driver was derived from the usbati_remote and usbkbd drivers by
+ *
+ * The 2.1.1 driver was derived from the usbati_remote and usbkbd drivers by
* Vojtech Pavlik.
*
* Changes:
@@ -23,64 +23,64 @@
* Added support for the "Lola" remote contributed by:
* Seth Cohn <sethcohn@yahoo.com>
*
- * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
+ * the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
- *
+ *
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
+ *
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ *
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
*
* Hardware & software notes
*
- * These remote controls are distributed by ATI as part of their
- * "All-In-Wonder" video card packages. The receiver self-identifies as a
+ * These remote controls are distributed by ATI as part of their
+ * "All-In-Wonder" video card packages. The receiver self-identifies as a
* "USB Receiver" with manufacturer "X10 Wireless Technology Inc".
*
- * The "Lola" remote is available from X10. See:
+ * The "Lola" remote is available from X10. See:
* http://www.x10.com/products/lola_sg1.htm
* The Lola is similar to the ATI remote but has no mouse support, and slightly
* different keys.
*
- * It is possible to use multiple receivers and remotes on multiple computers
+ * It is possible to use multiple receivers and remotes on multiple computers
* simultaneously by configuring them to use specific channels.
- *
- * The RF protocol used by the remote supports 16 distinct channels, 1 to 16.
- * Actually, it may even support more, at least in some revisions of the
+ *
+ * The RF protocol used by the remote supports 16 distinct channels, 1 to 16.
+ * Actually, it may even support more, at least in some revisions of the
* hardware.
*
* Each remote can be configured to transmit on one channel as follows:
- * - Press and hold the "hand icon" button.
- * - When the red LED starts to blink, let go of the "hand icon" button.
- * - When it stops blinking, input the channel code as two digits, from 01
+ * - Press and hold the "hand icon" button.
+ * - When the red LED starts to blink, let go of the "hand icon" button.
+ * - When it stops blinking, input the channel code as two digits, from 01
* to 16, and press the hand icon again.
- *
+ *
* The timing can be a little tricky. Try loading the module with debug=1
* to have the kernel print out messages about the remote control number
* and mask. Note: debugging prints remote numbers as zero-based hexadecimal.
*
* The driver has a "channel_mask" parameter. This bitmask specifies which
- * channels will be ignored by the module. To mask out channels, just add
+ * channels will be ignored by the module. To mask out channels, just add
* all the 2^channel_number values together.
*
* For instance, set channel_mask = 2^4 = 16 (binary 10000) to make ati_remote
- * ignore signals coming from remote controls transmitting on channel 4, but
+ * ignore signals coming from remote controls transmitting on channel 4, but
* accept all other channels.
*
- * Or, set channel_mask = 65533, (0xFFFD), and all channels except 1 will be
+ * Or, set channel_mask = 65533, (0xFFFD), and all channels except 1 will be
* ignored.
*
- * The default is 0 (respond to all channels). Bit 0 and bits 17-32 of this
+ * The default is 0 (respond to all channels). Bit 0 and bits 17-32 of this
* parameter are unused.
*
*/
@@ -99,13 +99,13 @@
/*
* Module and Version Information, Module Parameters
*/
-
-#define ATI_REMOTE_VENDOR_ID 0x0bc7
-#define ATI_REMOTE_PRODUCT_ID 0x004
-#define LOLA_REMOTE_PRODUCT_ID 0x002
+
+#define ATI_REMOTE_VENDOR_ID 0x0bc7
+#define ATI_REMOTE_PRODUCT_ID 0x004
+#define LOLA_REMOTE_PRODUCT_ID 0x002
#define MEDION_REMOTE_PRODUCT_ID 0x006
-#define DRIVER_VERSION "2.2.1"
+#define DRIVER_VERSION "2.2.1"
#define DRIVER_AUTHOR "Torrey Hoffman <thoffman@arnor.net>"
#define DRIVER_DESC "ATI/X10 RF USB Remote Control"
@@ -113,18 +113,18 @@
#define DATA_BUFSIZE 63 /* size of URB data buffers */
#define ATI_INPUTNUM 1 /* Which input device to register as */
-static unsigned long channel_mask = 0;
+static unsigned long channel_mask;
module_param(channel_mask, ulong, 0444);
MODULE_PARM_DESC(channel_mask, "Bitmask of remote control channels to ignore");
-static int debug = 0;
+static int debug;
module_param(debug, int, 0444);
MODULE_PARM_DESC(debug, "Enable extra debug messages and information");
#define dbginfo(dev, format, arg...) do { if (debug) dev_info(dev , format , ## arg); } while (0)
#undef err
#define err(format, arg...) printk(KERN_ERR format , ## arg)
-
+
static struct usb_device_id ati_remote_table[] = {
{ USB_DEVICE(ATI_REMOTE_VENDOR_ID, ATI_REMOTE_PRODUCT_ID) },
{ USB_DEVICE(ATI_REMOTE_VENDOR_ID, LOLA_REMOTE_PRODUCT_ID) },
@@ -148,7 +148,7 @@ static char init2[] = { 0x01, 0x00, 0x20, 0x14, 0x20, 0x20, 0x20 };
/* Acceleration curve for directional control pad */
static char accel[] = { 1, 2, 4, 6, 9, 13, 20 };
-/* Duplicate event filtering time.
+/* Duplicate event filtering time.
* Sequential, identical KIND_FILTERED inputs with less than
* FILTER_TIME jiffies between them are considered as repeat
* events. The hardware generates 5 events for the first keypress
@@ -161,10 +161,10 @@ static char accel[] = { 1, 2, 4, 6, 9, 13, 20 };
static DECLARE_MUTEX(disconnect_sem);
struct ati_remote {
- struct input_dev idev;
+ struct input_dev idev;
struct usb_device *udev;
struct usb_interface *interface;
-
+
struct urb *irq_urb;
struct urb *out_urb;
struct usb_endpoint_descriptor *endpoint_in;
@@ -174,13 +174,11 @@ struct ati_remote {
dma_addr_t inbuf_dma;
dma_addr_t outbuf_dma;
- int open; /* open counter */
-
unsigned char old_data[2]; /* Detect duplicate events */
unsigned long old_jiffies;
unsigned long acc_jiffies; /* handle acceleration */
unsigned int repeat_count;
-
+
char name[NAME_BUFSIZE];
char phys[NAME_BUFSIZE];
@@ -206,14 +204,14 @@ static struct
int type;
unsigned int code;
int value;
-} ati_remote_tbl[] =
+} ati_remote_tbl[] =
{
/* Directional control pad axes */
{KIND_ACCEL, 0x35, 0x70, EV_REL, REL_X, -1}, /* left */
{KIND_ACCEL, 0x36, 0x71, EV_REL, REL_X, 1}, /* right */
{KIND_ACCEL, 0x37, 0x72, EV_REL, REL_Y, -1}, /* up */
{KIND_ACCEL, 0x38, 0x73, EV_REL, REL_Y, 1}, /* down */
- /* Directional control pad diagonals */
+ /* Directional control pad diagonals */
{KIND_LU, 0x39, 0x74, EV_REL, 0, 0}, /* left up */
{KIND_RU, 0x3a, 0x75, EV_REL, 0, 0}, /* right up */
{KIND_LD, 0x3c, 0x77, EV_REL, 0, 0}, /* left down */
@@ -225,7 +223,7 @@ static struct
{KIND_LITERAL, 0x41, 0x7c, EV_KEY, BTN_RIGHT, 1},/* right btn down */
{KIND_LITERAL, 0x42, 0x7d, EV_KEY, BTN_RIGHT, 0},/* right btn up */
- /* Artificial "doubleclick" events are generated by the hardware.
+ /* Artificial "doubleclick" events are generated by the hardware.
* They are mapped to the "side" and "extra" mouse buttons here. */
{KIND_FILTERED, 0x3f, 0x7a, EV_KEY, BTN_SIDE, 1}, /* left dblclick */
{KIND_FILTERED, 0x43, 0x7e, EV_KEY, BTN_EXTRA, 1},/* right dblclick */
@@ -273,15 +271,15 @@ static struct
{KIND_FILTERED, 0xea, 0x25, EV_KEY, KEY_PLAY, 1}, /* ( >) */
{KIND_FILTERED, 0xe9, 0x24, EV_KEY, KEY_REWIND, 1}, /* (<<) */
{KIND_FILTERED, 0xeb, 0x26, EV_KEY, KEY_FORWARD, 1}, /* (>>) */
- {KIND_FILTERED, 0xed, 0x28, EV_KEY, KEY_STOP, 1}, /* ([]) */
+ {KIND_FILTERED, 0xed, 0x28, EV_KEY, KEY_STOP, 1}, /* ([]) */
{KIND_FILTERED, 0xee, 0x29, EV_KEY, KEY_PAUSE, 1}, /* ('') */
{KIND_FILTERED, 0xf0, 0x2b, EV_KEY, KEY_PREVIOUS, 1}, /* (<-) */
{KIND_FILTERED, 0xef, 0x2a, EV_KEY, KEY_NEXT, 1}, /* (>+) */
{KIND_FILTERED, 0xf2, 0x2D, EV_KEY, KEY_INFO, 1}, /* PLAYING */
{KIND_FILTERED, 0xf3, 0x2E, EV_KEY, KEY_HOME, 1}, /* TOP */
{KIND_FILTERED, 0xf4, 0x2F, EV_KEY, KEY_END, 1}, /* END */
- {KIND_FILTERED, 0xf5, 0x30, EV_KEY, KEY_SELECT, 1}, /* SELECT */
-
+ {KIND_FILTERED, 0xf5, 0x30, EV_KEY, KEY_SELECT, 1}, /* SELECT */
+
{KIND_END, 0x00, 0x00, EV_MAX + 1, 0, 0}
};
@@ -315,7 +313,7 @@ static void ati_remote_dump(unsigned char *data, unsigned int len)
if ((len == 1) && (data[0] != (unsigned char)0xff) && (data[0] != 0x00))
warn("Weird byte 0x%02x", data[0]);
else if (len == 4)
- warn("Weird key %02x %02x %02x %02x",
+ warn("Weird key %02x %02x %02x %02x",
data[0], data[1], data[2], data[3]);
else
warn("Weird data, len=%d %02x %02x %02x %02x %02x %02x ...",
@@ -328,25 +326,16 @@ static void ati_remote_dump(unsigned char *data, unsigned int len)
static int ati_remote_open(struct input_dev *inputdev)
{
struct ati_remote *ati_remote = inputdev->private;
- int retval = 0;
-
- down(&disconnect_sem);
-
- if (ati_remote->open++)
- goto exit;
/* On first open, submit the read urb which was set up previously. */
ati_remote->irq_urb->dev = ati_remote->udev;
if (usb_submit_urb(ati_remote->irq_urb, GFP_KERNEL)) {
- dev_err(&ati_remote->interface->dev,
+ dev_err(&ati_remote->interface->dev,
"%s: usb_submit_urb failed!\n", __FUNCTION__);
- ati_remote->open--;
- retval = -EIO;
+ return -EIO;
}
-exit:
- up(&disconnect_sem);
- return retval;
+ return 0;
}
/*
@@ -355,9 +344,8 @@ exit:
static void ati_remote_close(struct input_dev *inputdev)
{
struct ati_remote *ati_remote = inputdev->private;
-
- if (!--ati_remote->open)
- usb_kill_urb(ati_remote->irq_urb);
+
+ usb_kill_urb(ati_remote->irq_urb);
}
/*
@@ -366,13 +354,13 @@ static void ati_remote_close(struct input_dev *inputdev)
static void ati_remote_irq_out(struct urb *urb, struct pt_regs *regs)
{
struct ati_remote *ati_remote = urb->context;
-
+
if (urb->status) {
dev_dbg(&ati_remote->interface->dev, "%s: status %d\n",
__FUNCTION__, urb->status);
return;
}
-
+
ati_remote->send_flags |= SEND_FLAG_COMPLETE;
wmb();
wake_up(&ati_remote->wait);
@@ -380,16 +368,16 @@ static void ati_remote_irq_out(struct urb *urb, struct pt_regs *regs)
/*
* ati_remote_sendpacket
- *
+ *
* Used to send device initialization strings
*/
static int ati_remote_sendpacket(struct ati_remote *ati_remote, u16 cmd, unsigned char *data)
{
int retval = 0;
-
+
/* Set up out_urb */
memcpy(ati_remote->out_urb->transfer_buffer + 1, data, LO(cmd));
- ((char *) ati_remote->out_urb->transfer_buffer)[0] = HI(cmd);
+ ((char *) ati_remote->out_urb->transfer_buffer)[0] = HI(cmd);
ati_remote->out_urb->transfer_buffer_length = LO(cmd) + 1;
ati_remote->out_urb->dev = ati_remote->udev;
@@ -397,17 +385,17 @@ static int ati_remote_sendpacket(struct ati_remote *ati_remote, u16 cmd, unsigne
retval = usb_submit_urb(ati_remote->out_urb, GFP_ATOMIC);
if (retval) {
- dev_dbg(&ati_remote->interface->dev,
+ dev_dbg(&ati_remote->interface->dev,
"sendpacket: usb_submit_urb failed: %d\n", retval);
return retval;
}
wait_event_timeout(ati_remote->wait,
((ati_remote->out_urb->status != -EINPROGRESS) ||
- (ati_remote->send_flags & SEND_FLAG_COMPLETE)),
+ (ati_remote->send_flags & SEND_FLAG_COMPLETE)),
HZ);
usb_kill_urb(ati_remote->out_urb);
-
+
return retval;
}
@@ -419,15 +407,15 @@ static int ati_remote_event_lookup(int rem, unsigned char d1, unsigned char d2)
int i;
for (i = 0; ati_remote_tbl[i].kind != KIND_END; i++) {
- /*
- * Decide if the table entry matches the remote input.
+ /*
+ * Decide if the table entry matches the remote input.
*/
if ((((ati_remote_tbl[i].data1 & 0x0f) == (d1 & 0x0f))) &&
- ((((ati_remote_tbl[i].data1 >> 4) -
- (d1 >> 4) + rem) & 0x0f) == 0x0f) &&
+ ((((ati_remote_tbl[i].data1 >> 4) -
+ (d1 >> 4) + rem) & 0x0f) == 0x0f) &&
(ati_remote_tbl[i].data2 == d2))
return i;
-
+
}
return -1;
}
@@ -435,16 +423,16 @@ static int ati_remote_event_lookup(int rem, unsigned char d1, unsigned char d2)
/*
* ati_remote_report_input
*/
-static void ati_remote_input_report(struct urb *urb, struct pt_regs *regs)
+static void ati_remote_input_report(struct urb *urb, struct pt_regs *regs)
{
struct ati_remote *ati_remote = urb->context;
unsigned char *data= ati_remote->inbuf;
- struct input_dev *dev = &ati_remote->idev;
+ struct input_dev *dev = &ati_remote->idev;
int index, acc;
int remote_num;
-
+
/* Deal with strange looking inputs */
- if ( (urb->actual_length != 4) || (data[0] != 0x14) ||
+ if ( (urb->actual_length != 4) || (data[0] != 0x14) ||
((data[3] & 0x0f) != 0x00) ) {
ati_remote_dump(data, urb->actual_length);
return;
@@ -453,7 +441,7 @@ static void ati_remote_input_report(struct urb *urb, struct pt_regs *regs)
/* Mask unwanted remote channels. */
/* note: remote_num is 0-based, channel 1 on remote == 0 here */
remote_num = (data[3] >> 4) & 0x0f;
- if (channel_mask & (1 << (remote_num + 1))) {
+ if (channel_mask & (1 << (remote_num + 1))) {
dbginfo(&ati_remote->interface->dev,
"Masked input from channel 0x%02x: data %02x,%02x, mask= 0x%02lx\n",
remote_num, data[1], data[2], channel_mask);
@@ -463,37 +451,36 @@ static void ati_remote_input_report(struct urb *urb, struct pt_regs *regs)
/* Look up event code index in translation table */
index = ati_remote_event_lookup(remote_num, data[1], data[2]);
if (index < 0) {
- dev_warn(&ati_remote->interface->dev,
- "Unknown input from channel 0x%02x: data %02x,%02x\n",
+ dev_warn(&ati_remote->interface->dev,
+ "Unknown input from channel 0x%02x: data %02x,%02x\n",
remote_num, data[1], data[2]);
return;
- }
- dbginfo(&ati_remote->interface->dev,
+ }
+ dbginfo(&ati_remote->interface->dev,
"channel 0x%02x; data %02x,%02x; index %d; keycode %d\n",
remote_num, data[1], data[2], index, ati_remote_tbl[index].code);
-
+
if (ati_remote_tbl[index].kind == KIND_LITERAL) {
input_regs(dev, regs);
input_event(dev, ati_remote_tbl[index].type,
ati_remote_tbl[index].code,
ati_remote_tbl[index].value);
input_sync(dev);
-
+
ati_remote->old_jiffies = jiffies;
return;
}
-
+
if (ati_remote_tbl[index].kind == KIND_FILTERED) {
/* Filter duplicate events which happen "too close" together. */
- if ((ati_remote->old_data[0] == data[1]) &&
- (ati_remote->old_data[1] == data[2]) &&
- ((ati_remote->old_jiffies + FILTER_