diff options
Diffstat (limited to 'drivers/usb/host')
45 files changed, 1946 insertions, 1360 deletions
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 353cdd488b9..f788eb86707 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -27,6 +27,10 @@ config USB_XHCI_HCD To compile this driver as a module, choose M here: the module will be called xhci-hcd. +config USB_XHCI_PLATFORM + tristate + depends on USB_XHCI_HCD + config USB_XHCI_HCD_DEBUGGING bool "Debugging for the xHCI host controller" depends on USB_XHCI_HCD @@ -196,7 +200,7 @@ config USB_EHCI_S5P config USB_EHCI_MV bool "EHCI support for Marvell on-chip controller" - depends on USB_EHCI_HCD + depends on USB_EHCI_HCD && (ARCH_PXA || ARCH_MMP) select USB_EHCI_ROOT_HUB_TT ---help--- Enables support for Marvell (including PXA and MMP series) on-chip @@ -218,11 +222,15 @@ config USB_CNS3XXX_EHCI support. config USB_EHCI_ATH79 - bool "EHCI support for AR7XXX/AR9XXX SoCs" + bool "EHCI support for AR7XXX/AR9XXX SoCs (DEPRECATED)" depends on USB_EHCI_HCD && (SOC_AR71XX || SOC_AR724X || SOC_AR913X || SOC_AR933X) select USB_EHCI_ROOT_HUB_TT + select USB_EHCI_HCD_PLATFORM default y ---help--- + This option is deprecated now and the driver was removed, use + USB_EHCI_HCD_PLATFORM instead. + Enables support for the built-in EHCI controller present on the Atheros AR7XXX/AR9XXX SoCs. @@ -312,10 +320,14 @@ config USB_OHCI_HCD_OMAP3 OMAP3 and later chips. config USB_OHCI_ATH79 - bool "USB OHCI support for the Atheros AR71XX/AR7240 SoCs" + bool "USB OHCI support for the Atheros AR71XX/AR7240 SoCs (DEPRECATED)" depends on USB_OHCI_HCD && (SOC_AR71XX || SOC_AR724X) + select USB_OHCI_HCD_PLATFORM default y help + This option is deprecated now and the driver was removed, use + USB_OHCI_HCD_PLATFORM instead. + Enables support for the built-in OHCI controller present on the Atheros AR71XX/AR7240 SoCs. @@ -393,6 +405,26 @@ config USB_CNS3XXX_OHCI Enable support for the CNS3XXX SOC's on-chip OHCI controller. It is needed for low-speed USB 1.0 device support. +config USB_OHCI_HCD_PLATFORM + bool "Generic OHCI driver for a platform device" + depends on USB_OHCI_HCD && EXPERIMENTAL + default n + ---help--- + Adds an OHCI host driver for a generic platform device, which + provieds a memory space and an irq. + + If unsure, say N. + +config USB_EHCI_HCD_PLATFORM + bool "Generic EHCI driver for a platform device" + depends on USB_EHCI_HCD && EXPERIMENTAL + default n + ---help--- + Adds an EHCI host driver for a generic platform device, which + provieds a memory space and an irq. + + If unsure, say N. + config USB_OHCI_BIG_ENDIAN_DESC bool depends on USB_OHCI_HCD @@ -606,10 +638,3 @@ config USB_OCTEON_OHCI config USB_OCTEON2_COMMON bool default y if USB_OCTEON_EHCI || USB_OCTEON_OHCI - -config USB_PXA168_EHCI - bool "Marvell PXA168 on-chip EHCI HCD support" - depends on USB_EHCI_HCD && ARCH_MMP - help - Enable support for Marvell PXA168 SoC's on-chip EHCI - host controller diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index 7ca290fcb07..0982bcc140b 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -15,6 +15,10 @@ xhci-hcd-y := xhci.o xhci-mem.o xhci-hcd-y += xhci-ring.o xhci-hub.o xhci-dbg.o xhci-hcd-$(CONFIG_PCI) += xhci-pci.o +ifneq ($(CONFIG_USB_XHCI_PLATFORM), ) + xhci-hcd-y += xhci-plat.o +endif + obj-$(CONFIG_USB_WHCI_HCD) += whci/ obj-$(CONFIG_PCI) += pci-quirks.o diff --git a/drivers/usb/host/ehci-ath79.c b/drivers/usb/host/ehci-ath79.c deleted file mode 100644 index f1424f9bc36..00000000000 --- a/drivers/usb/host/ehci-ath79.c +++ /dev/null @@ -1,208 +0,0 @@ -/* - * Bus Glue for Atheros AR7XXX/AR9XXX built-in EHCI controller. - * - * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * Parts of this file are based on Atheros' 2.6.15 BSP - * Copyright (C) 2007 Atheros Communications, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/platform_device.h> - -enum { - EHCI_ATH79_IP_V1 = 0, - EHCI_ATH79_IP_V2, -}; - -static const struct platform_device_id ehci_ath79_id_table[] = { - { - .name = "ar71xx-ehci", - .driver_data = EHCI_ATH79_IP_V1, - }, - { - .name = "ar724x-ehci", - .driver_data = EHCI_ATH79_IP_V2, - }, - { - .name = "ar913x-ehci", - .driver_data = EHCI_ATH79_IP_V2, - }, - { - .name = "ar933x-ehci", - .driver_data = EHCI_ATH79_IP_V2, - }, - { - /* terminating entry */ - }, -}; - -MODULE_DEVICE_TABLE(platform, ehci_ath79_id_table); - -static int ehci_ath79_init(struct usb_hcd *hcd) -{ - struct ehci_hcd *ehci = hcd_to_ehci(hcd); - struct platform_device *pdev = to_platform_device(hcd->self.controller); - const struct platform_device_id *id; - int ret; - - id = platform_get_device_id(pdev); - if (!id) { - dev_err(hcd->self.controller, "missing device id\n"); - return -EINVAL; - } - - switch (id->driver_data) { - case EHCI_ATH79_IP_V1: - ehci->has_synopsys_hc_bug = 1; - - ehci->caps = hcd->regs; - ehci->regs = hcd->regs + - HC_LENGTH(ehci, - ehci_readl(ehci, &ehci->caps->hc_capbase)); - break; - - case EHCI_ATH79_IP_V2: - hcd->has_tt = 1; - - ehci->caps = hcd->regs + 0x100; - ehci->regs = hcd->regs + 0x100 + - HC_LENGTH(ehci, - ehci_readl(ehci, &ehci->caps->hc_capbase)); - break; - - default: - BUG(); - } - - dbg_hcs_params(ehci, "reset"); - dbg_hcc_params(ehci, "reset"); - ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); - ehci->sbrn = 0x20; - - ehci_reset(ehci); - - ret = ehci_init(hcd); - if (ret) - return ret; - - ehci_port_power(ehci, 0); - - return 0; -} - -static const struct hc_driver ehci_ath79_hc_driver = { - .description = hcd_name, - .product_desc = "Atheros built-in EHCI controller", - .hcd_priv_size = sizeof(struct ehci_hcd), - .irq = ehci_irq, - .flags = HCD_MEMORY | HCD_USB2, - - .reset = ehci_ath79_init, - .start = ehci_run, - .stop = ehci_stop, - .shutdown = ehci_shutdown, - - .urb_enqueue = ehci_urb_enqueue, - .urb_dequeue = ehci_urb_dequeue, - .endpoint_disable = ehci_endpoint_disable, - .endpoint_reset = ehci_endpoint_reset, - - .get_frame_number = ehci_get_frame, - - .hub_status_data = ehci_hub_status_data, - .hub_control = ehci_hub_control, - - .relinquish_port = ehci_relinquish_port, - .port_handed_over = ehci_port_handed_over, - - .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, -}; - -static int ehci_ath79_probe(struct platform_device *pdev) -{ - struct usb_hcd *hcd; - struct resource *res; - int irq; - int ret; - - if (usb_disabled()) - return -ENODEV; - - res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!res) { - dev_dbg(&pdev->dev, "no IRQ specified\n"); - return -ENODEV; - } - irq = res->start; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_dbg(&pdev->dev, "no base address specified\n"); - return -ENODEV; - } - - hcd = usb_create_hcd(&ehci_ath79_hc_driver, &pdev->dev, - dev_name(&pdev->dev)); - if (!hcd) - return -ENOMEM; - - hcd->rsrc_start = res->start; - hcd->rsrc_len = resource_size(res); - - if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { - dev_dbg(&pdev->dev, "controller already in use\n"); - ret = -EBUSY; - goto err_put_hcd; - } - - hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); - if (!hcd->regs) { - dev_dbg(&pdev->dev, "error mapping memory\n"); - ret = -EFAULT; - goto err_release_region; - } - - ret = usb_add_hcd(hcd, irq, IRQF_SHARED); - if (ret) - goto err_iounmap; - - return 0; - -err_iounmap: - iounmap(hcd->regs); - -err_release_region: - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); -err_put_hcd: - usb_put_hcd(hcd); - return ret; -} - -static int ehci_ath79_remove(struct platform_device *pdev) -{ - struct usb_hcd *hcd = platform_get_drvdata(pdev); - - usb_remove_hcd(hcd); - iounmap(hcd->regs); - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); - usb_put_hcd(hcd); - - return 0; -} - -static struct platform_driver ehci_ath79_driver = { - .probe = ehci_ath79_probe, - .remove = ehci_ath79_remove, - .id_table = ehci_ath79_id_table, - .driver = { - .owner = THIS_MODULE, - .name = "ath79-ehci", - } -}; - -MODULE_ALIAS(PLATFORM_MODULE_PREFIX "ath79-ehci"); diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c index a5a3ef1f009..19f318ababa 100644 --- a/drivers/usb/host/ehci-atmel.c +++ b/drivers/usb/host/ehci-atmel.c @@ -13,6 +13,7 @@ #include <linux/clk.h> #include <linux/platform_device.h> +#include <linux/of_platform.h> /* interface and function clocks */ static struct clk *iclk, *fclk; @@ -115,6 +116,8 @@ static const struct hc_driver ehci_atmel_hc_driver = { .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, }; +static u64 at91_ehci_dma_mask = DMA_BIT_MASK(32); + static int __devinit ehci_atmel_drv_probe(struct platform_device *pdev) { struct usb_hcd *hcd; @@ -137,6 +140,13 @@ static int __devinit ehci_atmel_drv_probe(struct platform_device *pdev) goto fail_create_hcd; } + /* Right now device-tree probed devices don't get dma_mask set. + * Since shared usb code relies on it, set it here for now. + * Once we have dma capability bindings this can go away. + */ + if (!pdev->dev.dma_mask) + pdev->dev.dma_mask = &at91_ehci_dma_mask; + hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev)); if (!hcd) { retval = -ENOMEM; @@ -225,9 +235,21 @@ static int __devexit ehci_atmel_drv_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_OF +static const struct of_device_id atmel_ehci_dt_ids[] = { + { .compatible = "atmel,at91sam9g45-ehci" }, + { /* sentinel */ } +}; + +MODULE_DEVICE_TABLE(of, atmel_ehci_dt_ids); +#endif + static struct platform_driver ehci_atmel_driver = { .probe = ehci_atmel_drv_probe, .remove = __devexit_p(ehci_atmel_drv_remove), .shutdown = usb_hcd_platform_shutdown, - .driver.name = "atmel-ehci", + .driver = { + .name = "atmel-ehci", + .of_match_table = of_match_ptr(atmel_ehci_dt_ids), + }, }; diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c index d6d74d2e09f..fd9109d7eb0 100644 --- a/drivers/usb/host/ehci-dbg.c +++ b/drivers/usb/host/ehci-dbg.c @@ -107,7 +107,7 @@ static void dbg_hcc_params (struct ehci_hcd *ehci, char *label) HCC_PER_PORT_CHANGE_EVENT(params) ? " ppce" : "", HCC_HW_PREFETCH(params) ? " hw prefetch" : "", HCC_32FRAME_PERIODIC_LIST(params) ? - " 32 peridic list" : ""); + " 32 periodic list" : ""); } } #else diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index b556a72264d..3e7345172e0 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -142,12 +142,12 @@ static int usb_hcd_fsl_probe(const struct hc_driver *driver, if (pdata->operating_mode == FSL_USB2_DR_OTG) { struct ehci_hcd *ehci = hcd_to_ehci(hcd); - ehci->transceiver = otg_get_transceiver(); + ehci->transceiver = usb_get_transceiver(); dev_dbg(&pdev->dev, "hcd=0x%p ehci=0x%p, transceiver=0x%p\n", hcd, ehci, ehci->transceiver); if (ehci->transceiver) { - retval = otg_set_host(ehci->transceiver, + retval = otg_set_host(ehci->transceiver->otg, &ehci_to_hcd(ehci)->self); if (retval) { if (ehci->transceiver) @@ -194,7 +194,7 @@ static void usb_hcd_fsl_remove(struct usb_hcd *hcd, struct ehci_hcd *ehci = hcd_to_ehci(hcd); if (ehci->transceiver) { - otg_set_host(ehci->transceiver, NULL); + otg_set_host(ehci->transceiver->otg, NULL); put_device(ehci->transceiver->dev); } @@ -216,6 +216,8 @@ static void ehci_fsl_setup_phy(struct ehci_hcd *ehci, unsigned int port_offset) { u32 portsc; + struct usb_hcd *hcd = ehci_to_hcd(ehci); + void __iomem *non_ehci = hcd->regs; portsc = ehci_readl(ehci, &ehci->regs->port_status[port_offset]); portsc &= ~(PORT_PTS_MSK | PORT_PTS_PTW); @@ -231,6 +233,8 @@ static void ehci_fsl_setup_phy(struct ehci_hcd *ehci, portsc |= PORT_PTS_PTW; /* fall through */ case FSL_USB2_PHY_UTMI: + /* enable UTMI PHY */ + setbits32(non_ehci + FSL_SOC_USB_CTRL, CTRL_UTMI_PHY_EN); portsc |= PORT_PTS_UTMI; break; case FSL_USB2_PHY_NONE: @@ -252,21 +256,18 @@ static void ehci_fsl_usb_setup(struct ehci_hcd *ehci) if (pdata->have_sysif_regs) { temp = in_be32(non_ehci + FSL_SOC_USB_CTRL); out_be32(non_ehci + FSL_SOC_USB_CTRL, temp | 0x00000004); - out_be32(non_ehci + FSL_SOC_USB_SNOOP1, 0x0000001b); - } -#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) - /* - * Turn on cache snooping hardware, since some PowerPC platforms - * wholly rely on hardware to deal with cache coherent - */ + /* + * Turn on cache snooping hardware, since some PowerPC platforms + * wholly rely on hardware to deal with cache coherent + */ - /* Setup Snooping for all the 4GB space */ - /* SNOOP1 starts from 0x0, size 2G */ - out_be32(non_ehci + FSL_SOC_USB_SNOOP1, 0x0 | SNOOP_SIZE_2GB); - /* SNOOP2 starts from 0x80000000, size 2G */ - out_be32(non_ehci + FSL_SOC_USB_SNOOP2, 0x80000000 | SNOOP_SIZE_2GB); -#endif + /* Setup Snooping for all the 4GB space */ + /* SNOOP1 starts from 0x0, size 2G */ + out_be32(non_ehci + FSL_SOC_USB_SNOOP1, 0x0 | SNOOP_SIZE_2GB); + /* SNOOP2 starts from 0x80000000, size 2G */ + out_be32(non_ehci + FSL_SOC_USB_SNOOP2, 0x80000000 | SNOOP_SIZE_2GB); + } if ((pdata->operating_mode == FSL_USB2_DR_HOST) || (pdata->operating_mode == FSL_USB2_DR_OTG)) @@ -316,7 +317,9 @@ static int ehci_fsl_setup(struct usb_hcd *hcd) struct ehci_hcd *ehci = hcd_to_ehci(hcd); int retval; struct fsl_usb2_platform_data *pdata; + struct device *dev; + dev = hcd->self.controller; pdata = hcd->self.controller->platform_data; ehci->big_endian_desc = pdata->big_endian_desc; ehci->big_endian_mmio = pdata->big_endian_mmio; @@ -346,6 +349,16 @@ static int ehci_fsl_setup(struct usb_hcd *hcd) ehci_reset(ehci); + if (of_device_is_compatible(dev->parent->of_node, + "fsl,mpc5121-usb2-dr")) { + /* + * set SBUSCFG:AHBBRST so that control msgs don't + * fail when doing heavy PATA writes. + */ + ehci_writel(ehci, SBUSCFG_INCR8, + hcd->regs + FSL_SOC_USB_SBUSCFG); + } + retval = ehci_fsl_reinit(ehci); return retval; } @@ -469,6 +482,8 @@ static int ehci_fsl_mpc512x_drv_resume(struct device *dev) ehci_writel(ehci, ISIPHYCTRL_PXE | ISIPHYCTRL_PHYE, hcd->regs + FSL_SOC_USB_ISIPHYCTRL); + ehci_writel(ehci, SBUSCFG_INCR8, hcd->regs + FSL_SOC_USB_SBUSCFG); + /* restore EHCI registers */ ehci_writel(ehci, pdata->pm_command, &ehci->regs->command); ehci_writel(ehci, pdata->pm_intr_enable, &ehci->regs->intr_enable); diff --git a/drivers/usb/host/ehci-fsl.h b/drivers/usb/host/ehci-fsl.h index 49180622116..863fb0c080d 100644 --- a/drivers/usb/host/ehci-fsl.h +++ b/drivers/usb/host/ehci-fsl.h @@ -19,6 +19,8 @@ #define _EHCI_FSL_H /* offsets for the non-ehci registers in the FSL SOC USB controller */ +#define FSL_SOC_USB_SBUSCFG 0x90 +#define SBUSCFG_INCR8 0x02 /* INCR8, specified */ #define FSL_SOC_USB_ULPIVP 0x170 #define FSL_SOC_USB_PORTSC1 0x184 #define PORT_PTS_MSK (3<<30) @@ -45,5 +47,7 @@ #define FSL_SOC_USB_PRICTRL 0x40c /* NOTE: big-endian */ #define FSL_SOC_USB_SICTRL 0x410 /* NOTE: big-endian */ #define FSL_SOC_USB_CTRL 0x500 /* NOTE: big-endian */ +#define CTRL_UTMI_PHY_EN (1<<9) +#define CTRL_PHY_CLK_VALID (1 << 17) #define SNOOP_SIZE_2GB 0x1e #endif /* _EHCI_FSL_H */ diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index a007a9fe0f8..057cdda7a48 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -45,7 +45,6 @@ #include <asm/byteorder.h> #include <asm/io.h> #include <asm/irq.h> -#include <asm/system.h> #include <asm/unaligned.h> #if defined(CONFIG_PPC_PS3) @@ -1351,21 +1350,11 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER s5p_ehci_driver #endif -#ifdef CONFIG_USB_EHCI_ATH79 -#include "ehci-ath79.c" -#define PLATFORM_DRIVER ehci_ath79_driver -#endif - #ifdef CONFIG_SPARC_LEON #include "ehci-grlib.c" #define PLATFORM_DRIVER ehci_grlib_driver #endif -#ifdef CONFIG_USB_PXA168_EHCI -#include "ehci-pxa168.c" -#define PLATFORM_DRIVER ehci_pxa168_driver -#endif - #ifdef CONFIG_CPU_XLR #include "ehci-xls.c" #define PLATFORM_DRIVER ehci_xls_driver @@ -1376,6 +1365,16 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER ehci_mv_driver #endif +#ifdef CONFIG_MACH_LOONGSON1 +#include "ehci-ls1x.c" +#define PLATFORM_DRIVER ehci_ls1x_driver +#endif + +#ifdef CONFIG_USB_EHCI_HCD_PLATFORM +#include "ehci-platform.c" +#define PLATFORM_DRIVER ehci_platform_driver +#endif + #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \ !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \ !defined(XILINX_OF_PLATFORM_DRIVER) diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 77bbb2357e4..256fbd42e48 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -107,7 +107,7 @@ static void ehci_handover_companion_ports(struct ehci_hcd *ehci) ehci->owned_ports = 0; } -static int ehci_port_change(struct ehci_hcd *ehci) +static int __maybe_unused ehci_port_change(struct ehci_hcd *ehci) { int i = HCS_N_PORTS(ehci->hcs_params); @@ -727,7 +727,7 @@ static int ehci_hub_control ( #ifdef CONFIG_USB_OTG if ((hcd->self.otg_port == (wIndex + 1)) && hcd->self.b_hnp_enable) { - otg_start_hnp(ehci->transceiver); + otg_start_hnp(ehci->transceiver->otg); break; } #endif @@ -1076,7 +1076,8 @@ error_exit: return retval; } -static void ehci_relinquish_port(struct usb_hcd *hcd, int portnum) +static void __maybe_unused ehci_relinquish_port(struct usb_hcd *hcd, + int portnum) { struct ehci_hcd *ehci = hcd_to_ehci(hcd); @@ -1085,7 +1086,8 @@ static void ehci_relinquish_port(struct usb_hcd *hcd, int portnum) set_owner(ehci, --portnum, PORT_OWNER); } -static int ehci_port_handed_over(struct usb_hcd *hcd, int portnum) +static int __maybe_unused ehci_port_handed_over(struct usb_hcd *hcd, + int portnum) { struct ehci_hcd *ehci = hcd_to_ehci(hcd); u32 __iomem *reg; diff --git a/drivers/usb/host/ehci-ls1x.c b/drivers/usb/host/ehci-ls1x.c new file mode 100644 index 00000000000..a283e59709d --- /dev/null +++ b/drivers/usb/host/ehci-ls1x.c @@ -0,0 +1,159 @@ +/* + * Bus Glue for Loongson LS1X built-in EHCI controller. + * + * Copyright (c) 2012 Zhang, Keguang <keguang.zhang@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + + +#include <linux/platform_device.h> + +static int ehci_ls1x_reset(struct usb_hcd *hcd) +{ + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + int ret; + + ehci->caps = hcd->regs; + + ret = ehci_setup(hcd); + if (ret) + return ret; + + ehci_port_power(ehci, 0); + + return 0; +} + +static const struct hc_driver ehci_ls1x_hc_driver = { + .description = hcd_name, + .product_desc = "LOONGSON1 EHCI", + .hcd_priv_size = sizeof(struct ehci_hcd), + + /* + * generic hardware linkage + */ + .irq = ehci_irq, + .flags = HCD_MEMORY | HCD_USB2, + + /* + * basic lifecycle operations + */ + .reset = ehci_ls1x_reset, + .start = ehci_run, + .stop = ehci_stop, + .shutdown = ehci_shutdown, + + /* + * managing i/o requests and associated device resources + */ + .urb_enqueue = ehci_urb_enqueue, + .urb_dequeue = ehci_urb_dequeue, + .endpoint_disable = ehci_endpoint_disable, + .endpoint_reset = ehci_endpoint_reset, + + /* + * scheduling support + */ + .get_frame_number = ehci_get_frame, + + /* + * root hub support + */ + .hub_status_data = ehci_hub_status_data, + .hub_control = ehci_hub_control, + .relinquish_port = ehci_relinquish_port, + .port_handed_over = ehci_port_handed_over, + + .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, +}; + +static int ehci_hcd_ls1x_probe(struct platform_device *pdev) +{ + struct usb_hcd *hcd; + struct resource *res; + int irq; + int ret; + + pr_debug("initializing loongson1 ehci USB Controller\n"); + + if (usb_disabled()) + return -ENODEV; + + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!res) { + dev_err(&pdev->dev, + "Found HC with no IRQ. Check %s setup!\n", + dev_name(&pdev->dev)); + return -ENODEV; + } + irq = res->start; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, + "Found HC with no register addr. Check %s setup!\n", + dev_name(&pdev->dev)); + return -ENODEV; + } + + hcd = usb_create_hcd(&ehci_ls1x_hc_driver, &pdev->dev, + dev_name(&pdev->dev)); + if (!hcd) + return -ENOMEM; + hcd->rsrc_start = res->start; + hcd->rsrc_len = resource_size(res); + + if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { + dev_dbg(&pdev->dev, "controller already in use\n"); + ret = -EBUSY; + goto err_put_hcd; + } + + hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); + if (hcd->regs == NULL) { + dev_dbg(&pdev->dev, "error mapping memory\n"); + ret = -EFAULT; + goto err_release_region; + } + + ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED); + if (ret) + goto err_iounmap; + + return ret; + +err_iounmap: + iounmap(hcd->regs); +err_release_region: + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); +err_put_hcd: + usb_put_hcd(hcd); + return ret; +} + +static int ehci_hcd_ls1x_remove(struct platform_device *pdev) +{ + struct usb_hcd *hcd = platform_get_drvdata(pdev); + + usb_remove_hcd(hcd); + iounmap(hcd->regs); + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); + usb_put_hcd(hcd); + + return 0; +} + +static struct platform_driver ehci_ls1x_driver = { + .probe = ehci_hcd_ls1x_probe, + .remove = ehci_hcd_ls1x_remove, + .shutdown = usb_hcd_platform_shutdown, + .driver = { + .name = "ls1x-ehci", + .owner = THIS_MODULE, + }, +}; + +MODULE_ALIAS(PLATFORM_MODULE_PREFIX "ls1x-ehci"); diff --git a/drivers/usb/host/ehci-msm.c b/drivers/usb/host/ehci-msm.c index 592d5f76803..9803a55fd5f 100644 --- a/drivers/usb/host/ehci-msm.c +++ b/drivers/usb/host/ehci-msm.c @@ -32,7 +32,7 @@ #define MSM_USB_BASE (hcd->regs) -static struct otg_transceiver *otg; +static struct usb_phy *phy; static int ehci_msm_reset(struct usb_hcd *hcd) { @@ -145,14 +145,14 @@ static int ehci_msm_probe(struct platform_device *pdev) * powering up VBUS, mapping of registers address space and power * management. */ - otg = otg_get_transceiver(); - if (!otg) { + phy = usb_get_transceiver(); + if (!phy) { dev_err(&pdev->dev, "unable to find transceiver\n"); ret = -ENODEV; goto unmap; } - ret = otg_set_host(otg, &hcd->self); + ret = otg_set_host(phy->otg, &hcd->self); if (ret < 0) { dev_err(&pdev->dev, "unable to register with transceiver\n"); goto put_transceiver; @@ -169,7 +169,7 @@ static int ehci_msm_probe(struct platform_device *pdev) return 0; put_transceiver: - otg_put_transceiver(otg); + usb_put_transceiver(phy); unmap: iounmap(hcd->regs); put_hcd: @@ -186,8 +186,8 @@ static int __devexit ehci_msm_remove(struct platform_device *pdev) pm_runtime_disable(&pdev->dev); pm_runtime_set_suspended(&pdev->dev); - otg_set_host(otg, NULL); - otg_put_transceiver(otg); + otg_set_host(phy->otg, NULL); + usb_put_transceiver(phy); usb_put_hcd(hcd); diff --git a/drivers/usb/host/ehci-mv.c b/drivers/usb/host/ehci-mv.c index 52a604fb932..a936bbcff8f 100644 --- a/drivers/usb/host/ehci-mv.c +++ b/drivers/usb/host/ehci-mv.c @@ -28,7 +28,7 @@ struct ehci_hcd_mv { void __iomem *cap_regs; void __iomem *op_regs; - struct otg_transceiver *otg; + struct usb_phy *otg; struct mv_usb_platform_data *pdata; @@ -253,7 +253,7 @@ static int mv_ehci_probe(struct platform_device *pdev) ehci_mv->mode = pdata->mode; if (ehci_mv->mode == MV_USB_MODE_OTG) { #ifdef CONFIG_USB_OTG_UTILS - ehci_mv->otg = otg_get_transceiver(); + ehci_mv->otg = usb_get_transceiver(); if (!ehci_mv->otg) { dev_err(&pdev->dev, "unable to find transceiver\n"); @@ -261,7 +261,7 @@ static int mv_ehci_probe(struct platform_device *pdev) goto err_disable_clk; } - retval = otg_set_host(ehci_mv->otg, &hcd->self); + retval = otg_set_host(ehci_mv->otg->otg, &hcd->self); if (retval < 0) { dev_err(&pdev->dev, "unable to register with transceiver\n"); @@ -303,7 +303,7 @@ err_set_vbus: #ifdef CONFIG_USB_OTG_UTILS err_put_transceiver: if (ehci_mv->otg) - otg_put_transceiver(ehci_mv->otg); + usb_put_transceiver(ehci_mv->otg); #endif err_disable_clk: mv_ehci_disable(ehci_mv); @@ -332,8 +332,8 @@ static int mv_ehci_remove(struct platform_device *pdev) usb_remove_hcd(hcd); if (ehci_mv->otg) { - otg_set_host(ehci_mv->otg, NULL); - otg_put_transceiver(ehci_mv->otg); + otg_set_host(ehci_mv->otg->otg, NULL); + usb_put_transceiver(ehci_mv->otg); } if (ehci_mv->mode == MV_USB_MODE_HOST) { diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c index 55978fcfa4b..a797d51ecbe 100644 --- a/drivers/usb/host/ehci-mxc.c +++ b/drivers/usb/host/ehci-mxc.c @@ -220,13 +220,13 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) /* Initialize the transceiver */ if (pdata->otg) { pdata->otg->io_priv = hcd->regs + ULPI_VIEWPORT_OFFSET; - ret = otg_init(pdata->otg); + ret = usb_phy_init(pdata->otg); if (ret) { dev_err(dev, "unable to init transceiver, probably missing\n"); ret = -ENODEV; goto err_add; } - ret = otg_set_vbus(pdata->otg, 1); + ret = otg_set_vbus(pdata->otg->otg, 1); if (ret) { dev_err(dev, "unable to enable vbus on transceiver\n"); goto err_add; @@ -247,9 +247,11 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) * It's in violation of USB specs */ if (machine_is_mx51_efikamx() || machine_is_mx51_efikasb()) { - flags = otg_io_read(pdata->otg, ULPI_OTG_CTRL); + flags = usb_phy_io_read(pdata->otg, + ULPI_OTG_CTRL); flags |= ULPI_OTG_CTRL_CHRGVBUS; - ret = otg_io_write(pdata->otg, flags, ULPI_OTG_CTRL); + ret = usb_phy_io_write(pdata->otg, flags, + ULPI_OTG_CTRL); if (ret) { dev_err(dev, "unable to set CHRVBUS\n"); goto err_add; @@ -297,7 +299,7 @@ static int __exit ehci_mxc_drv_remove(struct platform_device *pdev) pdata->exit(pdev); if (pdata->otg) - otg_shutdown(pdata->otg); + usb_phy_shutdown(pdata->otg); usb_remove_hcd(hcd); iounmap(hcd->regs); diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c new file mode 100644 index 00000000000..d238b4e24bb --- /dev/null +++ b/drivers/usb/host/ehci-platform.c @@ -0,0 +1,198 @@ +/* + * Generic platform ehci driver + * + * Copyright 2007 Steven Brown <sbrown@cortland.com> + * Copyright 2010-2012 Hauke Mehrtens <hauke@hauke-m.de> + * + * Derived from the ohci-ssb driver + * Copyright 2007 Michael Buesch <m@bues.ch> + * + * Derived from the EHCI-PCI driver + * Copyright (c) 2000-2004 by David Brownell + * + * Derived from the ohci-pci driver + * Copyright 1999 Roman Weissgaerber + * Copyright 2000-2002 David Brownell + * Copyright 1999 Linus Torvalds + * Copyright 1999 Gregory P. Smith + * + * Licensed under the GNU/GPL. See COPYING for details. + */ +#include <linux/platform_device.h> +#include <linux/usb/ehci_pdriver.h> + +static int ehci_platform_reset(struct usb_hcd *hcd) +{ + struct platform_device *pdev = to_platform_device(hcd->self.controller); + struct usb_ehci_pdata *pdata = pdev->dev.platform_data; + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + int retval; + + hcd->has_tt = pdata->has_tt; + ehci->has_synopsys_hc_bug = pdata->has_synopsys_hc_bug; + ehci->big_endian_desc = pdata->big_endian_desc; + ehci->big_endian_mmio = pdata->big_endian_mmio; + + ehci->caps = hcd->regs + pdata->caps_offset; + retval = ehci_setup(hcd); + if (retval) + return retval; + + if (pdata->port_power_on) + ehci_port_power(ehci, 1); + if (pdata->port_power_off) + ehci_port_power(ehci, 0); + + return 0; +} + +static const struct hc_driver ehci_platform_hc_driver = { + .description = hcd_name, + .product_desc = "Generic Platform EHCI Controller", + .hcd_priv_size = sizeof(struct ehci_hcd), + + .irq = ehci_irq, + .flags = HCD_MEMORY | HCD_USB2, + + .reset = ehci_platform_reset, + .start = ehci_run, + .stop = ehci_stop, + .shutdown = ehci_shutdown, + + .urb_enqueue = ehci_urb_enqueue, + .urb_dequeue = ehci_urb_dequeue, + .endpoint_disable = ehci_endpoint_disable, + .endpoint_reset = ehci_endpoint_reset, + + .get_frame_number = ehci_get_frame, + + .hub_status_data = ehci_hub_status_data, + .hub_control = ehci_hub_control, +#if defined(CONFIG_PM) + .bus_suspend = ehci_bus_suspend, + .bus_resume = ehci_bus_resume, +#endif + .relinquish_port = ehci_relinquish_port, + .port_handed_over = ehci_port_handed_over, + + .update_device = ehci_update_device, + + .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, +}; + +static int __devinit ehci_platform_probe(struct platform_device *dev) +{ + struct usb_hcd *hcd; + struct resource *res_mem; + int irq; + int err = -ENOMEM; + + BUG_ON(!dev->dev.platform_data); + + if (usb_disabled()) + return -ENODEV; + + irq = platform_get_irq(dev, 0); + if (irq < 0) { + pr_err("no irq provieded"); + return irq; + } + res_mem = platform_get_resource(dev, IORESOURCE_MEM, 0); + if (!res_mem) { + pr_err("no memory recourse provieded"); + return -ENXIO; + } + + hcd = usb_create_hcd(&ehci_platform_hc_driver, &dev->dev, + dev_name(&dev->dev)); + if (!hcd) + return -ENOMEM; + + hcd->rsrc_start = res_mem->start; + hcd->rsrc_len = resource_size(res_mem); + + if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { + pr_err("controller already in use"); + err = -EBUSY; + goto err_put_hcd; + } + + hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len); + if (!hcd->regs) + goto err_release_region; + err = usb_add_hcd(hcd, irq, IRQF_SHARED); + if (err) + goto err_iounmap; + + platform_set_drvdata(dev, hcd); + + return err; + +err_iounmap: + iounmap(hcd->regs); +err_release_region: + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); +err_put_hcd: + usb_put_hcd(hcd); + return err; +} + +static int __devexit ehci_platform_remove(struct platform_device *dev) +{ + struct usb_hcd *hcd = platform_get_drvdata(dev); + + usb_remove_hcd(hcd); + iounmap(hcd->regs); + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); + usb_put_hcd(hcd); + platform_set_drvdata(dev, NULL); + + return 0; +} + +#ifdef CONFIG_PM + +static int ehci_platform_suspend(struct device *dev) +{ + struct usb_hcd *hcd = dev_get_drvdata(dev); + bool wakeup = device_may_wakeup(dev); + + ehci_prepare_ports_for_controller_suspend(hcd_to_ehci(hcd), wakeup); + return 0; +} + +static int ehci_platform_resume(struct device *dev) +{ + struct usb_hcd *hcd = dev_get_drvdata(dev); + + ehci_prepare_ports_for_controller_resume(hcd_to_ehci(hcd)); + return 0; +} + +#else /* !CONFIG_PM */ +#define ehci_platform_suspend NULL +#define ehci_platform_resume NULL +#endif /* CONFIG_PM */ + +static const struct platform_device_id ehci_platform_table[] = { + { "ehci-platform", 0 }, + { } +}; +MODULE_DEVICE_TABLE(platform, ehci_platform_table); + +static const struct dev_pm_ops ehci_platform_pm_ops = { + .suspend = ehci_platform_suspend, + .resume = ehci_platform_resume, +}; + +static struct platform_driver ehci_platform_driver = { + .id_table = ehci_platform_table, + .probe = ehci_platform_probe, + .remove = __devexit_p(ehci_platform_remove), + .shutdown = usb_hcd_platform_shutdown, + .driver = { + .owner = THIS_MODULE, + .name = "ehci-platform", + .pm = &ehci_platform_pm_ops, + } +}; diff --git a/drivers/usb/host/ehci-pxa168.c b/drivers/usb/host/ehci-pxa168.c deleted file mode 100644 index 8d0e7a22e71..00000000000 --- a/drivers/usb/host/ehci-pxa168.c +++ /dev/null @@ -1,363 +0,0 @@ -/* - * drivers/usb/host/ehci-pxa168.c - * - * Tanmay Upadhyay <tanmay.upadhyay@einfochips.com> - * - * Based on drivers/usb/host/ehci-orion.c - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/clk.h> -#include <mach/pxa168.h> - -#define USB_PHY_CTRL_REG 0x4 -#define USB_PHY_PLL_REG 0x8 -#define USB_PHY_TX_REG 0xc - -#define FBDIV_SHIFT 4 - -#define ICP_SHIFT 12 -#define ICP_15 2 -#define ICP_20 3 -#define ICP_25 4 - -#define KVCO_SHIFT 15 - -#define PLLCALI12_SHIFT 25 -#define CALI12_VDD 0 -#define CALI12_09 1 -#define CALI12_10 2 -#define CALI12_11 3 - -#define PLLVDD12_SHIFT 27 -#define VDD12_VDD 0 -#define VDD12_10 1 -#define VDD12_11 2 -#define VDD12_12 3 - -#define PLLVDD18_SHIFT 29 -#define VDD18_19 0 -#define VDD18_20 1 -#define VDD18_21 2 -#define VDD18_22 3 - - -#define PLL_READY (1 << 23) -#define VCOCAL_START (1 << 21) -#define REG_RCAL_START (1 << 12) - -struct pxa168_usb_drv_data { - struct ehci_hcd ehci; - struct clk *pxa168_usb_clk; - struct resource *usb_phy_res; - void __iomem *usb_phy_reg_base; -}; - -static int ehci_pxa168_setup(struct usb_hcd *hcd) -{ - struct ehci_hcd *ehci = hcd_to_ehci(hcd); - int retval; - - ehci_reset(ehci); - retval = ehci_halt(ehci); - if (retval) - return retval; - - /* - * data structure init - */ - retval = ehci_init(hcd); - if (retval) - return retval; - - hcd->has_tt = 1; - - ehci_port_power(ehci, 0); - - return retval; -} - -static const struct hc_driver ehci_pxa168_hc_driver = { - .description = hcd_name, - .product_desc = "Marvell PXA168 EHCI", - .hcd_priv_size = sizeof(struct pxa168_usb_drv_data), - - /* - * generic hardware linkage - */ - .irq = ehci_irq, - .flags = HCD_MEMORY | HCD_USB2, - - /* - * basic lifecycle operations - */ - .reset = ehci_pxa168_setup, - .start = ehci_run, - .stop = ehci_stop, - .shutdown = ehci_shutdown, - - /* - * managing i/o requests and associated device resources - */ - .urb_enqueue = ehci_urb_enqueue, - .urb_dequeue = ehci_urb_dequeue, - .endpoint_disable = ehci_endpoint_disable, - .endpoint_reset = ehci_endpoint_reset, - - /* - * scheduling support - */ - .get_frame_number = ehci_get_frame, - - /* - * root hub support - */ - .hub_status_data = ehci_hub_status_data, - .hub_control = ehci_hub_control, - .bus_suspend = ehci_bus_suspend, - .bus_resume = ehci_bus_resume, - .relinquish_port = ehci_relinquish_port, - .port_handed_over = ehci_port_handed_over, - - .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, -}; - -static int pxa168_usb_phy_init(struct platform_device *pdev) -{ - struct resource *res; - void __iomem *usb_phy_reg_base; - struct pxa168_usb_pdata *pdata; - struct pxa168_usb_drv_data *drv_data; - struct usb_hcd *hcd = platform_get_drvdata(pdev); - unsigned long reg_val; - int pll_retry_cont = 10000, err = 0; - - drv_data = (struct pxa168_usb_drv_data *)hcd->hcd_priv; - pdata = (struct pxa168_usb_pdata *)pdev->dev.platform_data; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 1); - if (!res) { - dev_err(&pdev->dev, - "Found HC with no PHY register addr. Check %s setup!\n", - dev_name(&pdev->dev)); - return -ENODEV; - } - - if (!request_mem_region(res->start, resource_size(res), - ehci_pxa168_hc_driver.description)) { - dev_dbg(&pdev->dev, "controller already in use\n"); - return -EBUSY; - } - - usb_phy_reg_base = ioremap(res->start, resource_size(res)); - if (usb_phy_reg_base == NULL) { - dev_dbg(&pdev->dev, "error mapping memory\n"); - err = -EFAULT; - goto err1; - } - drv_data->usb_phy_reg_base = usb_phy_reg_base; - drv_data->usb_phy_res = res; - - /* If someone wants to init USB phy in board specific way */ - if (pdata && pdata->phy_init) - return pdata->phy_init(usb_phy_reg_base); - - /* Power up the PHY and PLL */ - writel(readl(usb_phy_reg_base + USB_PHY_CTRL_REG) | 0x3, - usb_phy_reg_base + USB_PHY_CTRL_REG); - - /* Configure PHY PLL */ - reg_val = readl(usb_phy_reg_base + USB_PHY_PLL_REG) & ~(0x7e03ffff); - reg_val |= (VDD18_22 << PLLVDD18_SHIFT | VDD12_12 << PLLVDD12_SHIFT | - CALI12_11 << PLLCALI12_SHIFT | 3 << KVCO_SHIFT | - ICP_15 << ICP_SHIFT | 0xee << FBDIV_SHIFT | 0xb); - writel(reg_val, usb_phy_reg_base + USB_PHY_PLL_REG); - - /* Make sure PHY PLL is ready */ - while (!(readl(usb_phy_reg_base + USB_PHY_PLL_REG) & PLL_READY)) { - if (!(pll_retry_cont--)) { - dev_dbg(&pdev->dev, "USB PHY PLL not ready\n"); - err = -EIO; - goto err2; - } - } - - /* Toggle VCOCAL_START bit of U2PLL for PLL calibration */ - udelay(200); - writel(readl(usb_phy_reg_base + USB_PHY_PLL_REG) | VCOCAL_START, - usb_phy_reg_base + USB_PHY_PLL_REG); - udelay(40); - writel(readl(usb_phy_reg_base + USB_PHY_PLL_REG) & ~VCOCAL_START, - usb_phy_reg_base + USB_PHY_PLL_REG); - - /* Toggle REG_RCAL_START bit of U2PTX for impedance calibration */ - udelay(400); - writel(readl(usb_phy_reg_base + USB_PHY_TX_REG) | REG_RCAL_START, - usb_phy_reg_base + USB_PHY_TX_REG); - udelay(40); - writel(readl(usb_phy_reg_base + USB_PHY_TX_REG) & ~REG_RCAL_START, - usb_phy_reg_base + USB_PHY_TX_REG); - - /* Make sure PHY PLL is ready again */ - pll_retry_cont = 0; - while (!(readl(usb_phy_reg_base + USB_PHY_PLL_REG) & PLL_READY)) { - if (!(pll_retry_cont--)) { - dev_dbg(&pdev->dev, "USB PHY PLL not ready\n"); - err = -EIO; - goto err2; - } - } - - return 0; -err2: - iounmap(usb_phy_reg_base); -err1: - release_mem_region(res->start, resource_size(res)); - return err; -} - -static int __devinit ehci_pxa168_drv_probe(struct platform_device *pdev) -{ - struct resource *res; - struct usb_hcd *hcd; - struct ehci_hcd *ehci; - struct pxa168_usb_drv_data *drv_data; - void __iomem *regs; - int irq, err = 0; - - if (usb_disabled()) - return -ENODEV; - - pr_debug("Initializing pxa168-SoC USB Host Controller\n"); - - irq = platform_get_irq(pdev, 0); - if (irq <= 0) { - dev_err(&pdev->dev, - "Found HC with no IRQ. Check %s setup!\n", - dev_name(&pdev->dev)); - err = -ENODEV; - goto err1; - } - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, - "Found HC with no register addr. Check %s setup!\n", - dev_name(&pdev->dev)); - err = -ENODEV; - goto err1; - } - - if (!request_mem_region(res->start, resource_size(res), - ehci_pxa168_hc_driver.description)) { - dev_dbg(&pdev->dev, "controller already in use\n"); - err = -EBUSY; - goto err1; - } - - regs = ioremap(res->start, resource_size(res)); - if (regs == NULL) { - dev_dbg(&pdev->dev, "error mapping memory\n"); - err = -EFAULT; - goto err2; - } - - hcd = usb_create_hcd(&ehci_pxa168_hc_driver, - &pdev->dev, dev_name(&pdev->dev)); - if (!hcd) { - err = -ENOMEM; - goto err3; - } - - drv_data = (struct pxa168_usb_drv_data *)hcd->hcd_priv; - - /* Enable USB clock */ - drv_data->pxa168_usb_clk = clk_get(&pdev->dev, "PXA168-USBCLK"); - if (IS_ERR(drv_data->pxa168_usb_clk)) { - dev_err(&pdev->dev, "Couldn't get USB clock\n"); - err = PTR_ERR(drv_data->pxa168_usb_clk); - goto err4; - } - clk_enable(drv_data->pxa168_usb_clk); - - err = pxa168_usb_phy_init(pdev); - if (err) { - dev_err(&pdev->dev, "USB PHY initialization failed\n"); - goto err5; - } - - hcd->rsrc_start = res->start; - hcd->rsrc_len = resource_size(res); - hcd->regs = regs; - - ehci = hcd_to_ehci(hcd); - ehci->caps = hcd->regs + 0x100; - ehci->regs = hcd->regs + 0x100 + - HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase)); - ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); - hcd->has_tt = 1; - ehci->sbrn = 0x20; - - err = usb_add_hcd(hcd, irq, IRQF_SHARED | IRQF_DISABLED); - if (err) - goto err5; - - return 0; - -err5: - clk_disable(drv_data->pxa168_usb_clk); - clk_put(drv_data->pxa168_usb_clk); -err4: - usb_put_hcd(hcd); -err3: - iounmap(regs); -err2: - release_mem_region(res->start, resource_size(res)); -err1: - dev_err(&pdev->dev, "init %s fail, %d\n", - dev_name(&pdev->dev), err); - - return err; -} - -static int __exit ehci_pxa168_drv_remove(struct platform_device *pdev) -{ - struct usb_hcd *hcd = platform_get_drvdata(pdev); - struct pxa168_usb_drv_data *drv_data = - (struct pxa168_usb_drv_data *)hcd->hcd_priv; - - usb_remove_hcd(hcd); - - /* Power down PHY & PLL */ - writel(readl(drv_data->usb_phy_reg_base + USB_PHY_CTRL_REG) & (~0x3), - drv_data->usb_phy_reg_base + USB_PHY_CTRL_REG); - - clk_disable(drv_data->pxa168_usb_clk); - clk_put(drv_data->pxa168_usb_clk); - - iounmap(hcd->regs); - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); - - iounmap(drv_data->usb_phy_reg_base); - release_mem_region(drv_data->usb_phy_res->start, - resource_size(drv_data->usb_phy_res)); - - usb_put_hcd(hcd); - - return 0; -} - -MODULE_ALIAS("platform:pxa168-ehci"); - -static struct platform_driver ehci_pxa168_driver = { - .probe = ehci_pxa168_drv_probe, - .remove = __exit_p(ehci_pxa168_drv_remove), - .shutdown = usb_hcd_platform_shutdown, - .driver.name = "pxa168-ehci", -}; diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c index 293f7412992..f098e2a291a 100644 --- a/drivers/usb/host/ehci-s5p.c +++ b/drivers/usb/host/ehci-s5p.c @@ -17,6 +17,15 @@ #include <plat/ehci.h> #include <plat/usb-phy.h> +#define EHCI_INSNREG00(base) (base + 0x90) +#define EHCI_INSNREG00_ENA_INCR16 (0x1 << 25) +#define EHCI_INSNREG00_ENA_INCR8 (0x1 << 24) +#define EHCI_INSNREG00_ENA_INCR4 (0x1 << 23) +#define EHCI_INSNREG00_ENA_INCRX_ALIGN (0x1 << 22) +#define EHCI_INSNREG00_ENABLE_DMA_BURST \ + (EHCI_INSNREG00_ENA_INCR16 | EHCI_INSNREG00_ENA_INCR8 | \ + EHCI_INSNREG00_ENA_INCR4 | EHCI_INSNREG00_ENA_INCRX_ALIGN) + struct s5p_ehci_hcd { struct device *dev; struct usb_hcd *hcd; @@ -128,6 +137,9 @@ static int __devinit s5p_ehci_probe(struct platform_device *pdev) ehci->regs = hcd->regs + HC_LENGTH(ehci, readl(&ehci->caps->hc_capbase)); + /* DMA burst Enable */ + writel(EHCI_INSNREG00_ENABLE_DMA_BURST, EHCI_INSNREG00(hcd->regs)); + dbg_hcs_params(ehci, "reset"); dbg_hcc_params(ehci, "reset"); @@ -234,6 +246,9 @@ static int s5p_ehci_resume(struct device *dev) if (pdata && pdata->phy_init) pdata->phy_init(pdev, S5P_USB_PHY_HOST); + /* DMA burst Enable */ + writel(EHCI_INSNREG00_ENABLE_DMA_BURST, EHCI_INSNREG00(hcd->regs)); + if (time_before(jiffies, ehci->next_statechange)) msleep(100); diff --git a/drivers/usb/host/ehci-spear.c b/drivers/usb/host/ehci-spear.c index b115b0b76e3..6e928559169 100644 --- a/drivers/usb/host/ehci-spear.c +++ b/drivers/usb/host/ehci-spear.c @@ -11,8 +11,10 @@ * more details. */ -#include <linux/platform_device.h> #include <linux/clk.h> +#include <linux/jiffies.h> +#include <linux/platform_device.h> +#include <linux/pm.h> struct spear_ehci { struct ehci_hcd ehci; @@ -90,6 +92,82 @@ static const struct hc_driver ehci_spear_hc_driver = { .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, }; +#ifdef CONFIG_PM +static int ehci_spear_drv_suspend(struct device *dev) +{ + struct usb_hcd *hcd = dev_get_drvdata(dev); + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + unsigned long flags; + int rc = 0; + + if (time_before(jiffies, ehci->next_statechange)) + msleep(10); + + /* + * Root hub was already suspended. Disable irq emission and mark HW + * unaccessible. The PM and USB cores make sure that the root hub is + * either suspended or stopped. + */ + spin_lock_irqsave(&ehci->lock, flags); + ehci_prepare_ports_for_controller_suspend(ehci, device_may_wakeup(dev)); + ehci_writel(ehci, 0, &ehci->regs->intr_enable); + ehci_readl(ehci, &ehci->regs->intr_enable); + spin_unlock_irqrestore(&ehci->lock, flags); + + return rc; +} + +static int ehci_spear_drv_resume(struct device *dev) +{ + struct usb_hcd *hcd = dev_get_drvdata(dev); + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + + if (time_before(jiffies, ehci->next_statechange)) + msleep(100); + + if (ehci_readl(ehci, &ehci->regs->configured_flag) == FLAG_CF) { + int mask = INTR_MASK; + + ehci_prepare_ports_for_controller_resume(ehci); + + if (!hcd->self.root_hub->do_remote_wakeup) + mask &= ~STS_PCD; + + ehci_writel(ehci, mask, &ehci->regs->intr_enable); + ehci_readl(ehci, &ehci->regs->intr_enable); + return 0; + } + + usb_root_hub_lost_power(hcd->self.root_hub); + + /* + * Else reset, to cope with power loss or flush-to-storage style + * "resume" having let BIOS kick in during reboot. + */ + ehci_halt(ehci); + ehci_reset(ehci); + + /* emptying the schedule aborts any urbs */ + spin_lock_irq(&ehci->lock); + if (ehci->reclaim) + end_unlink_async(ehci); + + ehci_work(ehci); + spin_unlock_irq(&ehci->lock); + + ehci_writel(ehci, ehci->command, &ehci->regs->command); + ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag); + ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */ + + /* here we "know" root ports should always stay powered */ + ehci_port_power(ehci, 1); + return 0; +} +#endif /* CONFIG_PM */ + +static SIMPLE_DEV_PM_OPS(ehci_spear_pm_ops, ehci_spear_drv_suspend, + ehci_spear_drv_resume); + static int spear_ehci_hcd_drv_probe(struct platform_device *pdev) { struct usb_hcd *hcd ; @@ -205,7 +283,8 @@ static struct platform_driver spear_ehci_hcd_driver = { .shutdown = usb_hcd_platform_shutdown, .driver = { .name = "spear-ehci", - .bus = &platform_bus_type + .bus = &platform_bus_type, + .pm = &ehci_spear_pm_ops, } }; diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index dbc7fe8ca9e..3de48a2d795 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -35,7 +35,7 @@ struct tegra_ehci_hcd { struct tegra_usb_phy *phy; struct clk *clk; struct clk *emc_clk; - struct otg_transceiver *transceiver; + struct usb_phy *transceiver; int host_resumed; int bus_suspended; int port_resuming; @@ -733,9 +733,9 @@ static int tegra_ehci_probe(struct platform_device *pdev) #ifdef CONFIG_USB_OTG_UTILS if (pdata->operating_mode == TEGRA_USB_OTG) { - tegra->transceiver = otg_get_transceiver(); + tegra->transceiver = usb_get_transceiver(); if (tegra->transceiver) - otg_set_host(tegra->transceiver, &hcd->self); + otg_set_host(tegra->transceiver->otg, &hcd->self); } #endif @@ -750,8 +750,8 @@ static int tegra_ehci_probe(struct platform_device *pdev) fail: #ifdef CONFIG_USB_OTG_UTILS if (tegra->transceiver) { - otg_set_host(tegra->transceiver, NULL); - otg_put_transceiver(tegra->transceiver); + otg_set_host(tegra->transceiver->otg, NULL); + usb_put_transceiver(tegra->transceiver); } #endif tegra_usb_phy_close(tegra->phy); @@ -808,8 +808,8 @@ static int tegra_ehci_remove(struct platform_device *pdev) #ifdef CONFIG_USB_OTG_UTILS if (tegra->transceiver) { - otg_set_host(tegra->transceiver, NULL); - otg_put_transceiver(tegra->transceiver); + otg_set_host(tegra->transceiver->otg, NULL); + usb_put_transceiver(tegra->transceiver); } #endif diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index 0a5fda73b3f..8f9acbc96fd 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -176,7 +176,7 @@ struct ehci_hcd { /* one per controller */ /* * OTG controllers and transceivers need software interaction */ - struct otg_transceiver *transceiver; + struct usb_phy *transceiver; }; /* convert between an HCD pointer and the corresponding EHCI_HCD */ diff --git a/drivers/usb/host/fsl-mph-dr-of.c b/drivers/usb/host/fsl-mph-dr-of.c index 7916e56a725..ab333ac6071 100644 --- a/drivers/usb/host/fsl-mph-dr-of.c +++ b/drivers/usb/host/fsl-mph-dr-of.c @@ -94,7 +94,6 @@ struct platform_device * __devinit fsl_usb2_device_register( pdev->dev.parent = &ofdev->dev; pdev->dev.coherent_dma_mask = ofdev->dev.coherent_dma_mask; - pdev->dev.dma_mask = &pdev->archdata.dma_mask; *pdev->dev.dma_mask = *ofdev->dev.dma_mask; retval = platform_device_add_data(pdev, pdata, sizeof(*pdata)); diff --git a/drivers/usb/host/imx21-dbg.c b/drivers/usb/host/imx21-dbg.c index 6d753342716..ec98ecee351 100644 --- a/drivers/usb/host/imx21-dbg.c +++ b/drivers/usb/host/imx21-dbg.c @@ -239,7 +239,7 @@ static int debug_status_show(struct seq_file *s, void *v) "ETDs allocated: %d/%d (max=%d)\n" "ETDs in use sw: %d\n" "ETDs in use hw: %d\n" - "DMEM alocated: %d/%d (max=%d)\n" + "DMEM allocated: %d/%d (max=%d)\n" "DMEM blocks: %d\n" "Queued waiting for ETD: %d\n" "Queued waiting for DMEM: %d\n", diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c index d91e5f211a7..9e65e3091c8 100644 --- a/drivers/usb/host/isp116x-hcd.c +++ b/drivers/usb/host/isp116x-hcd.c @@ -70,7 +70,6 @@ #include <asm/io.h> #include <asm/irq.h> -#include <asm/system.h> #include <asm/byteorder.h> #include "isp116x.h" @@ -1569,6 +1568,9 @@ static int __devinit isp116x_probe(struct platform_device *pdev) int ret = 0; unsigned long irqflags; + if (usb_disabled()) + return -ENODEV; + if (pdev->num_resources < 3) { ret = -ENODEV; goto err1; @@ -1708,22 +1710,4 @@ static struct platform_driver isp116x_driver = { }, }; -/*-----------------------------------------------------------------*/ - -static int __init isp116x_init(void) -{ - if (usb_disabled()) - return -ENODEV; - - INFO("driver %s, %s\n", hcd_name, DRIVER_VERSION); - return platform_driver_register(&isp116x_driver); -} - -module_init(isp116x_init); - -static void __exit isp116x_cleanup(void) -{ - platform_driver_unregister(&isp116x_driver); -} - -module_exit(isp116x_cleanup); +module_platform_driver(isp116x_driver); diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c index e5fd8aa57af..2ed112d3e15 100644 --- a/drivers/usb/host/isp1362-hcd.c +++ b/drivers/usb/host/isp1362-hcd.c @@ -84,7 +84,6 @@ #include <linux/prefetch.h> #include <asm/irq.h> -#include <asm/system.h> #include <asm/byteorder.h> #include <asm/unaligned.h> @@ -2693,6 +2692,9 @@ static int __devinit isp1362_probe(struct platform_device *pdev) struct resource *irq_res; unsigned int irq_flags = 0; + if (usb_disabled()) + return -ENODEV; + /* basic sanity checks first. board-specific init logic should * have initialized this the three resources and probably board * specific platform_data. we don't probe for IRQs, and do only @@ -2864,19 +2866,4 @@ static struct platform_driver isp1362_driver = { }, }; -/*-------------------------------------------------------------------------*/ - -static int __init isp1362_init(void) -{ - if (usb_disabled()) - return -ENODEV; - pr_info("driver %s, %s\n", hcd_name, DRIVER_VERSION); - return platform_driver_register(&isp1362_driver); -} -module_init(isp1362_init); - -static void __exit isp1362_cleanup(void) -{ - platform_driver_unregister(&isp1362_driver); -} -module_exit(isp1362_cleanup); +module_platform_driver(isp1362_driver); diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index 77afabc77f9..db8963f5fbc 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -14,6 +14,8 @@ #include <linux/clk.h> #include <linux/platform_device.h> +#include <linux/of_platform.h> +#include <linux/of_gpio.h> #include <mach/hardware.h> #include <asm/gpio.h> @@ -448,10 +450,11 @@ static irqreturn_t ohci_hcd_at91_overcurrent_irq(int irq, void *data) /* From the GPIO notifying the over-current situation, find * out the corresponding port */ - gpio = irq_to_gpio(irq); for (port = 0; port < ARRAY_SIZE(pdata->overcurrent_pin); port++) { - if (pdata->overcurrent_pin[port] == gpio) + if (gpio_to_irq(pdata->overcurrent_pin[port]) == irq) { + gpio = pdata->overcurrent_pin[port]; break; + } } if (port == ARRAY_SIZE(pdata->overcurrent_pin)) { @@ -476,13 +479,109 @@ static irqreturn_t ohci_hcd_at91_overcurrent_irq(int irq, void *data) return IRQ_HANDLED; } +#ifdef CONFIG_OF +static const struct of_device_id at91_ohci_dt_ids[] = { + { .compatible = "atmel,at91rm9200-ohci" }, + { /* sentinel */ } +}; + +MODULE_DEVICE_TABLE(of, at91_ohci_dt_ids); + +static u64 at91_ohci_dma_mask = DMA_BIT_MASK(32); + +static int __devinit ohci_at91_of_init(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + int i, ret, gpio; + enum of_gpio_flags flags; + struct at91_usbh_data *pdata; + u32 ports; + + if (!np) + return 0; + + /* Right now device-tree probed devices don't get dma_mask set. + * Since shared usb code relies on it, set it here for now. + * Once we have dma capability bindings this can go away. + */ + if (!pdev->dev.dma_mask) + pdev->dev.dma_mask = &at91_ohci_dma_mask; + + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return -ENOMEM; + + if (!of_property_read_u32(np, "num-ports", &ports)) + pdata->ports = ports; + + for (i = 0; i < 2; i++) { + gpio = of_get_named_gpio_flags(np, "atmel,vbus-gpio", i, &flags); + pdata->vbus_pin[i] = gpio; + if (!gpio_is_valid(gpio)) + continue; + pdata->vbus_pin_active_low[i] = flags & OF_GPIO_ACTIVE_LOW; + ret = gpio_request(gpio, "ohci_vbus"); + if (ret) { + dev_warn(&pdev->dev, "can't request vbus gpio %d", gpio); + continue; + } + ret = gpio_direction_output(gpio, !(flags & OF_GPIO_ACTIVE_LOW) ^ 1); + if (ret) + dev_warn(&pdev->dev, "can't put vbus gpio %d as output %d", + !(flags & OF_GPIO_ACTIVE_LOW) ^ 1, gpio); + } + + for (i = 0; i < 2; i++) { + gpio = of_get_named_gpio_flags(np, "atmel,oc-gpio", i, &flags); + pdata->overcurrent_pin[i] = gpio; + if (!gpio_is_valid(gpio)) + continue; + ret = gpio_request(gpio, "ohci_overcurrent"); + if (ret) { + dev_err(&pdev->dev, "can't request overcurrent gpio %d", gpio); + continue; + } + + ret = gpio_direction_input(gpio); + if (ret) { + dev_err(&pdev->dev, "can't configure overcurrent gpio %d as input", gpio); + continue; + } + + ret = request_irq(gpio_to_irq(gpio), + ohci_hcd_at91_overcurrent_irq, + IRQF_SHARED, "ohci_overcurrent", pdev); + if (ret) { + gpio_free(gpio); + dev_warn(& pdev->dev, "cannot get GPIO IRQ for overcurrent\n"); + } + } + + pdev->dev.platform_data = pdata; + + return 0; +} +#else +static int __devinit ohci_at91_of_init(struct platform_device *pdev) +{ + return 0; +} +#endif + /*-------------------------------------------------------------------------*/ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev) { - struct at91_usbh_data *pdata = pdev->dev.platform_data; + struct at91_usbh_data *pdata; int i; + i = ohci_at91_of_init(pdev); + + if (i) + return i; + + pdata = pdev->dev.platform_data; + if (pdata) { for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) { if (!gpio_is_valid(pdata->vbus_pin[i])) @@ -595,5 +694,6 @@ static struct platform_driver ohci_hcd_at91_driver = { .driver = { .name = "at91_ohci", .owner = THIS_MODULE, + .of_match_table = of_match_ptr(at91_ohci_dt_ids), }, }; diff --git a/drivers/usb/host/ohci-ath79.c b/drivers/usb/host/ohci-ath79.c deleted file mode 100644 index 18d574d6958..00000000000 --- a/drivers/usb/host/ohci-ath79.c +++ /dev/null @@ -1,151 +0,0 @@ -/* - * OHCI HCD (Host Controller Driver) for USB. - * - * Bus Glue for Atheros AR71XX/AR724X built-in OHCI controller. - * - * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * Parts of this file are based on Atheros' 2.6.15 BSP - * Copyright (C) 2007 Atheros Communications, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/platform_device.h> - -static int __devinit ohci_ath79_start(struct usb_hcd *hcd) -{ - struct ohci_hcd *ohci = hcd_to_ohci(hcd); - int ret; - - ret = ohci_init(ohci); - if (ret < 0) - return ret; - - ret = ohci_run(ohci); - if (ret < 0) - goto err; - - return 0; - -err: - ohci_stop(hcd); - return ret; -} - -static const struct hc_driver ohci_ath79_hc_driver = { - .description = hcd_name, - .product_desc = "Atheros built-in OHCI controller", - .hcd_priv_size = sizeof(struct ohci_hcd), - - .irq = ohci_irq, - .flags = HCD_USB11 | HCD_MEMORY, - - .start = ohci_ath79_start, - .stop = ohci_stop, - .shutdown = ohci_shutdown, - - .urb_enqueue = ohci_urb_enqueue, - .urb_dequeue = ohci_urb_dequeue, - .endpoint_disable = ohci_endpoint_disable, - - /* - * scheduling support - */ - .get_frame_number = ohci_get_frame, - - /* - * root hub support - */ - .hub_status_data = ohci_hub_status_data, - .hub_control = ohci_hub_control, - .start_port_reset = ohci_start_port_reset, -}; - -static int ohci_ath79_probe(struct platform_device *pdev) -{ - struct usb_hcd *hcd; - struct resource *res; - int irq; - int ret; - - if (usb_disabled()) - return -ENODEV; - - res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!res) { - dev_dbg(&pdev->dev, "no IRQ specified\n"); - return -ENODEV; - } - irq = res->start; - - hcd = usb_create_hcd(&ohci_ath79_hc_driver, &pdev->dev, - dev_name(&pdev->dev)); - if (!hcd) - return -ENOMEM; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_dbg(&pdev->dev, "no base address specified\n"); - ret = -ENODEV; - goto err_put_hcd; - } - hcd->rsrc_start = res->start; - hcd->rsrc_len = resource_size(res); - - if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { - dev_dbg(&pdev->dev, "controller already in use\n"); - ret = -EBUSY; - goto err_put_hcd; - } - - hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); - if (!hcd->regs) { - dev_dbg(&pdev->dev, "error mapping memory\n"); - ret = -EFAULT; - goto err_release_region; - } - - ohci_hcd_init(hcd_to_ohci(hcd)); - - ret = usb_add_hcd(hcd, irq, 0); - if (ret) - goto err_stop_hcd; - - return 0; - -err_stop_hcd: - iounmap(hcd->regs); -err_release_region: - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); -err_put_hcd: - usb_put_hcd(hcd); - return ret; -} - -static int ohci_ath79_remove(struct platform_device *pdev) -{ - struct usb_hcd *hcd = platform_get_drvdata(pdev); - - usb_remove_hcd(hcd); - iounmap(hcd->regs); - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); - usb_put_hcd(hcd); - - return 0; -} - -static struct platform_driver ohci_hcd_ath79_driver = { - .probe = ohci_ath79_probe, - .remove = ohci_ath79_remove, - .shutdown = usb_hcd_platform_shutdown, - .driver = { - .name = "ath79-ohci", - .owner = THIS_MODULE, - }, -}; - -MODULE_ALIAS(PLATFORM_MODULE_PREFIX "ath79-ohci"); diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c index 55aa35aa3d7..37bb20ebb6f 100644 --- a/drivers/usb/host/ohci-exynos.c +++ b/drivers/usb/host/ohci-exynos.c @@ -212,12 +212,10 @@ static int exynos_ohci_suspend(struct device *dev) * mark HW unaccessible, bail out if RH has been resumed. Use * the spinlock to properly synchronize with possible pending * RH suspend or resume activity. - * - * This is still racy as hcd->state is manipulated outside of - * any locks =P But that will be a different fix. */ spin_lock_irqsave(&ohci->lock, flags); - if (hcd->state != HC_STATE_SUSPENDED && hcd->state != HC_STATE_HALT) { + if (ohci->rh_state != OHCI_RH_SUSPENDED && + ohci->rh_state != OHCI_RH_HALTED) { rc = -EINVAL; goto fail; } diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 34b9edd8665..235171f2946 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -42,7 +42,6 @@ #include <asm/io.h> #include <asm/irq.h> -#include <asm/system.h> #include <asm/unaligned.h> #include <asm/byteorder.h> @@ -899,7 +898,7 @@ static void ohci_stop (struct usb_hcd *hcd) ohci_usb_reset (ohci); ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable); free_irq(hcd->irq, hcd); - hcd->irq = -1; + hcd->irq = 0; if (quirk_zfmicro(ohci)) del_timer(&ohci->unlink_watchdog); @@ -1000,7 +999,7 @@ MODULE_LICENSE ("GPL"); #define SA1111_DRIVER ohci_hcd_sa1111_driver #endif -#if defined(CONFIG_ARCH_S3C2410) || defined(CONFIG_ARCH_S3C64XX) +#if defined(CONFIG_ARCH_S3C24XX) || defined(CONFIG_ARCH_S3C64XX) #include "ohci-s3c2410.c" #define PLATFORM_DRIVER ohci_hcd_s3c2410_driver #endif @@ -1050,9 +1049,9 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER ohci_hcd_at91_driver #endif -#ifdef CONFIG_ARCH_PNX4008 -#include "ohci-pnx4008.c" -#define PLATFORM_DRIVER usb_hcd_pnx4008_driver +#if defined(CONFIG_ARCH_PNX4008) || defined(CONFIG_ARCH_LPC32XX) +#include "ohci-nxp.c" +#define PLATFORM_DRIVER usb_hcd_nxp_driver #endif #ifdef CONFIG_ARCH_DAVINCI_DA8XX @@ -1111,16 +1110,16 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER ohci_hcd_cns3xxx_driver #endif -#ifdef CONFIG_USB_OHCI_ATH79 -#include "ohci-ath79.c" -#define PLATFORM_DRIVER ohci_hcd_ath79_driver -#endif - #ifdef CONFIG_CPU_XLR #include "ohci-xls.c" #define PLATFORM_DRIVER ohci_xls_driver #endif +#ifdef CONFIG_USB_OHCI_HCD_PLATFORM +#include "ohci-platform.c" +#define PLATFORM_DRIVER ohci_platform_driver +#endif + #if !defined(PCI_DRIVER) && \ !defined(PLATFORM_DRIVER) && \ !defined(OMAP1_PLATFORM_DRIVER) && \ diff --git a/drivers/usb/host/ohci-pnx4008.c b/drivers/usb/host/ohci-nxp.c index 0013db7bdf9..6618de1d881 100644 --- a/drivers/usb/host/ohci-pnx4008.c +++ b/drivers/usb/host/ohci-nxp.c @@ -1,7 +1,9 @@ /* - * drivers/usb/host/ohci-pnx4008.c + * driver for NXP USB Host devices * - * driver for Philips PNX4008 USB Host + * Currently supported OHCI host devices: + * - Philips PNX4008 + * - NXP LPC32xx * * Authors: Dmitry Chigirev <source@mvista.com> * Vitaly Wool <vitalywool@gmail.com> @@ -22,20 +24,24 @@ #include <linux/i2c.h> #include <mach/hardware.h> +#include <asm/mach-types.h> #include <asm/io.h> #include <mach/platform.h> #include <mach/irqs.h> #include <asm/gpio.h> -#define USB_CTRL IO_ADDRESS(PNX4008_PWRMAN_BASE + 0x64) +#define USB_CONFIG_BASE 0x31020000 +#define PWRMAN_BASE 0x40004000 + +#define USB_CTRL IO_ADDRESS(PWRMAN_BASE + 0x64) /* USB_CTRL bit defines */ #define USB_SLAVE_HCLK_EN (1 << 24) #define USB_HOST_NEED_CLK_EN (1 << 21) -#define USB_OTG_CLK_CTRL IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0xFF4) -#define USB_OTG_CLK_STAT IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0xFF8) +#define USB_OTG_CLK_CTRL IO_ADDRESS(USB_CONFIG_BASE + 0xFF4) +#define USB_OTG_CLK_STAT IO_ADDRESS(USB_CONFIG_BASE + 0xFF8) /* USB_OTG_CLK_CTRL bit defines */ #define AHB_M_CLOCK_ON (1 << 4) @@ -44,7 +50,7 @@ #define DEV_CLOCK_ON (1 << 1) #define HOST_CLOCK_ON (1 << 0) -#define USB_OTG_STAT_CONTROL IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0x110) +#define USB_OTG_STAT_CONTROL IO_ADDRESS(USB_CONFIG_BASE + 0x110) /* USB_OTG_STAT_CONTROL bit defines */ #define TRANSPARENT_I2C_EN (1 << 7) @@ -98,6 +104,15 @@ #define ISP1301_I2C_INTERRUPT_RISING 0xE #define ISP1301_I2C_REG_CLEAR_ADDR 1 +/* On LPC32xx, those are undefined */ +#ifndef start_int_set_falling_edge +#define start_int_set_falling_edge(irq) +#define start_int_set_rising_edge(irq) +#define start_int_ack(irq) +#define start_int_mask(irq) +#define start_int_umask(irq) +#endif + static struct i2c_driver isp1301_driver; static struct i2c_client *isp1301_i2c_client; @@ -121,73 +136,129 @@ static int isp1301_remove(struct i2c_client *client) } static const struct i2c_device_id isp1301_id[] = { - { "isp1301_pnx", 0 }, + { "isp1301_nxp", 0 }, { } }; static struct i2c_driver isp1301_driver = { .driver = { - .name = "isp1301_pnx", + .name = "isp1301_nxp", }, .probe = isp1301_probe, .remove = isp1301_remove, .id_table = isp1301_id, }; -static void i2c_write(u8 buf, u8 subaddr) -{ - char tmpbuf[2]; - - tmpbuf[0] = subaddr; /*register number */ - tmpbuf[1] = buf; /*register data */ - i2c_master_send(isp1301_i2c_client, &tmpbuf[0], 2); -} - -static void isp1301_configure(void) +static void isp1301_configure_pnx4008(void) { /* PNX4008 only supports DAT_SE0 USB mode */ /* PNX4008 R2A requires setting the MAX603 to output 3.6V */ /* Power up externel charge-pump */ - i2c_write(MC1_DAT_SE0 | MC1_SPEED_REG, ISP1301_I2C_MODE_CONTROL_1); - i2c_write(~(MC1_DAT_SE0 | MC1_SPEED_REG), - ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR); - i2c_write(MC2_BI_DI | MC2_PSW_EN | MC2_SPD_SUSP_CTRL, - ISP1301_I2C_MODE_CONTROL_2); - i2c_write(~(MC2_BI_DI | MC2_PSW_EN | MC2_SPD_SUSP_CTRL), - ISP1301_I2C_MODE_CONTROL_2 | ISP1301_I2C_REG_CLEAR_ADDR); - i2c_write(OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN, - ISP1301_I2C_OTG_CONTROL_1); - i2c_write(~(OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN), - ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR); - i2c_write(0xFF, - ISP1301_I2C_INTERRUPT_LATCH | ISP1301_I2C_REG_CLEAR_ADDR); - i2c_write(0xFF, - ISP1301_I2C_INTERRUPT_FALLING | ISP1301_I2C_REG_CLEAR_ADDR); - i2c_write(0xFF, - ISP1301_I2C_INTERRUPT_RISING | ISP1301_I2C_REG_CLEAR_ADDR); + i2c_smbus_write_byte_data(isp1301_i2c_client, + ISP1301_I2C_MODE_CONTROL_1, MC1_DAT_SE0 | MC1_SPEED_REG); + i2c_smbus_write_byte_data(isp1301_i2c_client, + ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR, + ~(MC1_DAT_SE0 | MC1_SPEED_REG)); + i2c_smbus_write_byte_data(isp1301_i2c_client, + ISP1301_I2C_MODE_CONTROL_2, + MC2_BI_DI | MC2_PSW_EN | MC2_SPD_SUSP_CTRL); + i2c_smbus_write_byte_data(isp1301_i2c_client, + ISP1301_I2C_MODE_CONTROL_2 | ISP1301_I2C_REG_CLEAR_ADDR, + ~(MC2_BI_DI | MC2_PSW_EN | MC2_SPD_SUSP_CTRL)); + i2c_smbus_write_byte_data(isp1301_i2c_client, + ISP1301_I2C_OTG_CONTROL_1, OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN); + i2c_smbus_write_byte_data(isp1301_i2c_client, + ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR, + ~(OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN)); + i2c_smbus_write_byte_data(isp1301_i2c_client, + ISP1301_I2C_INTERRUPT_LATCH | ISP1301_I2C_REG_CLEAR_ADDR, 0xFF); + i2c_smbus_write_byte_data(isp1301_i2c_client, + ISP1301_I2C_INTERRUPT_FALLING | ISP1301_I2C_REG_CLEAR_ADDR, + 0xFF); + i2c_smbus_write_byte_data(isp1301_i2c_client, + ISP1301_I2C_INTERRUPT_RISING | ISP1301_I2C_REG_CLEAR_ADDR, + 0xFF); +} +static void isp1301_configure_lpc32xx(void) +{ + /* LPC32XX only supports DAT_SE0 USB mode */ + /* This sequence is important */ + + /* Disable transparent UART mode first */ + i2c_smbus_write_byte_data(isp1301_i2c_client, + (ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR), + MC1_UART_EN); + i2c_smbus_write_byte_data(isp1301_i2c_client, + (ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR), + ~MC1_SPEED_REG); + i2c_smbus_write_byte_data(isp1301_i2c_client, + ISP1301_I2C_MODE_CONTROL_1, MC1_SPEED_REG); + i2c_smbus_write_byte_data(isp1301_i2c_client, + (ISP1301_I2C_MODE_CONTROL_2 | ISP1301_I2C_REG_CLEAR_ADDR), + ~0); + i2c_smbus_write_byte_data(isp1301_i2c_client, + ISP1301_I2C_MODE_CONTROL_2, + (MC2_BI_DI | MC2_PSW_EN | MC2_SPD_SUSP_CTRL)); + i2c_smbus_write_byte_data(isp1301_i2c_client, + (ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR), ~0); + i2c_smbus_write_byte_data(isp1301_i2c_client, + ISP1301_I2C_MODE_CONTROL_1, MC1_DAT_SE0); + i2c_smbus_write_byte_data(isp1301_i2c_client, + ISP1301_I2C_OTG_CONTROL_1, + (OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN)); + i2c_smbus_write_byte_data(isp1301_i2c_client, + (ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR), + (OTG1_DM_PULLUP | OTG1_DP_PULLUP)); + i2c_smbus_write_byte_data(isp1301_i2c_client, + ISP1301_I2C_INTERRUPT_LATCH | ISP1301_I2C_REG_CLEAR_ADDR, ~0); + i2c_smbus_write_byte_data(isp1301_i2c_client, + ISP1301_I2C_INTERRUPT_FALLING | ISP1301_I2C_REG_CLEAR_ADDR, + ~0); + i2c_smbus_write_byte_data(isp1301_i2c_client, + ISP1301_I2C_INTERRUPT_RISING | ISP1301_I2C_REG_CLEAR_ADDR, ~0); + + /* Enable usb_need_clk clock after transceiver is initialized */ + __raw_writel((__raw_readl(USB_CTRL) | (1 << 22)), USB_CTRL); + + printk(KERN_INFO "ISP1301 Vendor ID : 0x%04x\n", + i2c_smbus_read_word_data(isp1301_i2c_client, 0x00)); + printk(KERN_INFO "ISP1301 Product ID : 0x%04x\n", + i2c_smbus_read_word_data(isp1301_i2c_client, 0x02)); + printk(KERN_INFO "ISP1301 Version ID : 0x%04x\n", + i2c_smbus_read_word_data(isp1301_i2c_client, 0x14)); +} + +static void isp1301_configure(void) +{ + if (machine_is_pnx4008()) + isp1301_configure_pnx4008(); + else + isp1301_configure_lpc32xx(); } static inline void isp1301_vbus_on(void) { - i2c_write(OTG1_VBUS_DRV, ISP1301_I2C_OTG_CONTROL_1); + i2c_smbus_write_byte_data(isp1301_i2c_client, ISP1301_I2C_OTG_CONTROL_1, + OTG1_VBUS_DRV); } static inline void isp1301_vbus_off(void) { - i2c_write(OTG1_VBUS_DRV, - ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR); + i2c_smbus_write_byte_data(isp1301_i2c_client, + ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR, + OTG1_VBUS_DRV); } -static void pnx4008_start_hc(void) +static void nxp_start_hc(void) { unsigned long tmp = __raw_readl(USB_OTG_STAT_CONTROL) | HOST_EN; __raw_writel(tmp, USB_OTG_STAT_CONTROL); isp1301_vbus_on(); } -static void pnx4008_stop_hc(void) +static void nxp_stop_hc(void) { unsigned long tmp; isp1301_vbus_off(); @@ -195,7 +266,7 @@ static void pnx4008_stop_hc(void) __raw_writel(tmp, USB_OTG_STAT_CONTROL); } -static int __devinit ohci_pnx4008_start(struct usb_hcd *hcd) +static int __devinit ohci_nxp_start(struct usb_hcd *hcd) { struct ohci_hcd *ohci = hcd_to_ohci(hcd); int ret; @@ -211,9 +282,9 @@ static int __devinit ohci_pnx4008_start(struct usb_hcd *hcd) return 0; } -static const struct hc_driver ohci_pnx4008_hc_driver = { +static const struct hc_driver ohci_nxp_hc_driver = { .description = hcd_name, - .product_desc = "pnx4008 OHCI", + .product_desc = "nxp OHCI", /* * generic hardware linkage @@ -225,7 +296,7 @@ static const struct hc_driver ohci_pnx4008_hc_driver = { /* * basic lifecycle operations */ - .start = ohci_pnx4008_start, + .start = ohci_nxp_start, .stop = ohci_stop, .shutdown = ohci_shutdown, @@ -255,54 +326,58 @@ static const struct hc_driver ohci_pnx4008_hc_driver = { #define USB_CLOCK_MASK (AHB_M_CLOCK_ON| OTG_CLOCK_ON | HOST_CLOCK_ON | I2C_CLOCK_ON) -static void pnx4008_set_usb_bits(void) +static void nxp_set_usb_bits(void) { - start_int_set_falling_edge(SE_USB_OTG_ATX_INT_N); - start_int_ack(SE_USB_OTG_ATX_INT_N); - start_int_umask(SE_USB_OTG_ATX_INT_N); - - start_int_set_rising_edge(SE_USB_OTG_TIMER_INT); - start_int_ack(SE_USB_OTG_TIMER_INT); - start_int_umask(SE_USB_OTG_TIMER_INT); - - start_int_set_rising_edge(SE_USB_I2C_INT); - start_int_ack(SE_USB_I2C_INT); - start_int_umask(SE_USB_I2C_INT); - - start_int_set_rising_edge(SE_USB_INT); - start_int_ack(SE_USB_INT); - start_int_umask(SE_USB_INT); - - start_int_set_rising_edge(SE_USB_NEED_CLK_INT); - start_int_ack(SE_USB_NEED_CLK_INT); - start_int_umask(SE_USB_NEED_CLK_INT); - - start_int_set_rising_edge(SE_USB_AHB_NEED_CLK_INT); - start_int_ack(SE_USB_AHB_NEED_CLK_INT); - start_int_umask(SE_USB_AHB_NEED_CLK_INT); + if (machine_is_pnx4008()) { + start_int_set_falling_edge(SE_USB_OTG_ATX_INT_N); + start_int_ack(SE_USB_OTG_ATX_INT_N); + start_int_umask(SE_USB_OTG_ATX_INT_N); + + start_int_set_rising_edge(SE_USB_OTG_TIMER_INT); + start_int_ack(SE_USB_OTG_TIMER_INT); + start_int_umask(SE_USB_OTG_TIMER_INT); + + start_int_set_rising_edge(SE_USB_I2C_INT); + start_int_ack(SE_USB_I2C_INT); + start_int_umask(SE_USB_I2C_INT); + + start_int_set_rising_edge(SE_USB_INT); + start_int_ack(SE_USB_INT); + start_int_umask(SE_USB_INT); + + start_int_set_rising_edge(SE_USB_NEED_CLK_INT); + start_int_ack(SE_USB_NEED_CLK_INT); + start_int_umask(SE_USB_NEED_CLK_INT); + + start_int_set_rising_edge(SE_USB_AHB_NEED_CLK_INT); + start_int_ack(SE_USB_AHB_NEED_CLK_INT); + start_int_umask(SE_USB_AHB_NEED_CLK_INT); + } } -static void pnx4008_unset_usb_bits(void) +static void nxp_unset_usb_bits(void) { - start_int_mask(SE_USB_OTG_ATX_INT_N); - start_int_mask(SE_USB_OTG_TIMER_INT); - start_int_mask(SE_USB_I2C_INT); - start_int_mask(SE_USB_INT); - start_int_mask(SE_USB_NEED_CLK_INT); - start_int_mask(SE_USB_AHB_NEED_CLK_INT); + if (machine_is_pnx4008()) { + start_int_mask(SE_USB_OTG_ATX_INT_N); + start_int_mask(SE_USB_OTG_TIMER_INT); + start_int_mask(SE_USB_I2C_INT); + start_int_mask(SE_USB_INT); + start_int_mask(SE_USB_NEED_CLK_INT); + start_int_mask(SE_USB_AHB_NEED_CLK_INT); + } } -static int __devinit usb_hcd_pnx4008_probe(struct platform_device *pdev) +static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev) { struct usb_hcd *hcd = 0; struct ohci_hcd *ohci; - const struct hc_driver *driver = &ohci_pnx4008_hc_driver; + const struct hc_driver *driver = &ohci_nxp_hc_driver; struct i2c_adapter *i2c_adap; struct i2c_board_info i2c_info; int ret = 0, irq; - dev_dbg(&pdev->dev, "%s: " DRIVER_DESC " (pnx4008)\n", hcd_name); + dev_dbg(&pdev->dev, "%s: " DRIVER_DESC " (nxp)\n", hcd_name); if (usb_disabled()) { err("USB is disabled"); ret = -ENODEV; @@ -327,7 +402,7 @@ static int __devinit usb_hcd_pnx4008_probe(struct platform_device *pdev) } i2c_adap = i2c_get_adapter(2); memset(&i2c_info, 0, sizeof(struct i2c_board_info)); - strlcpy(i2c_info.type, "isp1301_pnx", I2C_NAME_SIZE); + strlcpy(i2c_info.type, "isp1301_nxp", I2C_NAME_SIZE); isp1301_i2c_client = i2c_new_probed_device(i2c_adap, &i2c_info, normal_i2c, NULL); i2c_put_adapter(i2c_adap); @@ -375,7 +450,7 @@ static int __devinit usb_hcd_pnx4008_probe(struct platform_device *pdev) } /* Set all USB bits in the Start Enable register */ - pnx4008_set_usb_bits(); + nxp_set_usb_bits(); hcd->rsrc_start = pdev->resource[0].start; hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1; @@ -392,7 +467,7 @@ static int __devinit usb_hcd_pnx4008_probe(struct platform_device *pdev) goto out4; } - pnx4008_start_hc(); + nxp_start_hc(); platform_set_drvdata(pdev, hcd); ohci = hcd_to_ohci(hcd); ohci_hcd_init(ohci); @@ -402,9 +477,9 @@ static int __devinit usb_hcd_pnx4008_probe(struct platform_device *pdev) if (ret == 0) return ret; - pnx4008_stop_hc(); + nxp_stop_hc(); out4: - pnx4008_unset_usb_bits(); + nxp_unset_usb_bits(); usb_put_hcd(hcd); out3: clk_disable(usb_clk); @@ -419,15 +494,15 @@ out: return ret; } -static int usb_hcd_pnx4008_remove(struct platform_device *pdev) +static int usb_hcd_nxp_remove(struct platform_device *pdev) { struct usb_hcd *hcd = platform_get_drvdata(pdev); usb_remove_hcd(hcd); - pnx4008_stop_hc(); + nxp_stop_hc(); release_mem_region(hcd->rsrc_start, hcd->rsrc_len); usb_put_hcd(hcd); - pnx4008_unset_usb_bits(); + nxp_unset_usb_bits(); clk_disable(usb_clk); clk_put(usb_clk); i2c_unregister_device(isp1301_i2c_client); @@ -442,12 +517,12 @@ static int usb_hcd_pnx4008_remove(struct platform_device *pdev) /* work with hotplug and coldplug */ MODULE_ALIAS("platform:usb-ohci"); -static struct platform_driver usb_hcd_pnx4008_driver = { +static struct platform_driver usb_hcd_nxp_driver = { .driver = { .name = "usb-ohci", .owner = THIS_MODULE, }, - .probe = usb_hcd_pnx4008_probe, - .remove = usb_hcd_pnx4008_remove, + .probe = usb_hcd_nxp_probe, + .remove = usb_hcd_nxp_remove, }; diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c index db3968656d2..96451e41ee8 100644 --- a/drivers/usb/host/ohci-omap.c +++ b/drivers/usb/host/ohci-omap.c @@ -171,7 +171,7 @@ static void start_hnp(struct ohci_hcd *ohci) unsigned long flags; u32 l; - otg_start_hnp(ohci->transceiver); + otg_start_hnp(ohci->transceiver->otg); local_irq_save(flags); ohci->transceiver->state = OTG_STATE_A_SUSPEND; @@ -210,9 +210,9 @@ static int ohci_omap_init(struct usb_hcd *hcd) #ifdef CONFIG_USB_OTG if (need_transceiver) { - ohci->transceiver = otg_get_transceiver(); + ohci->transceiver = usb_get_transceiver(); if (ohci->transceiver) { - int status = otg_set_host(ohci->transceiver, + int status = otg_set_host(ohci->transceiver->otg, &ohci_to_hcd(ohci)->self); dev_dbg(hcd->self.controller, "init %s transceiver, status %d\n", ohci->transceiver->label, status); @@ -404,7 +404,7 @@ usb_hcd_omap_remove (struct usb_hcd *hcd, struct platform_device *pdev) usb_remove_hcd(hcd); if (ohci->transceiver) { - (void) otg_set_host(ohci->transceiver, 0); + (void) otg_set_host(ohci->transceiver->otg, 0); put_device(ohci->transceiver->dev); } if (machine_is_omap_osk()) diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c new file mode 100644 index 00000000000..ec5c6791c8b --- /dev/null +++ b/drivers/usb/host/ohci-platform.c @@ -0,0 +1,194 @@ +/* + * Generic platform ohci driver + * + * Copyright 2007 Michael Buesch <m@bues.ch> + * Copyright 2011-2012 Hauke Mehrtens <hauke@hauke-m.de> + * + * Derived from the OCHI-SSB driver + * Derived from the OHCI-PCI driver + * Copyright 1999 Roman Weissgaerber + * Copyright 2000-2002 David Brownell + * Copyright 1999 Linus Torvalds + * Copyright 1999 Gregory P. Smith + * + * Licensed under the GNU/GPL. See COPYING for details. + */ +#include <linux/platform_device.h> +#include <linux/usb/ohci_pdriver.h> + +static int ohci_platform_reset(struct usb_hcd *hcd) +{ + struct platform_device *pdev = to_platform_device(hcd->self.controller); + struct usb_ohci_pdata *pdata = pdev->dev.platform_data; + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + int err; + + if (pdata->big_endian_desc) + ohci->flags |= OHCI_QUIRK_BE_DESC; + if (pdata->big_endian_mmio) + ohci->flags |= OHCI_QUIRK_BE_MMIO; + if (pdata->no_big_frame_no) + ohci->flags |= OHCI_QUIRK_FRAME_NO; + + ohci_hcd_init(ohci); + err = ohci_init(ohci); + + return err; +} + +static int ohci_platform_start(struct usb_hcd *hcd) +{ + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + int err; + + err = ohci_run(ohci); + if (err < 0) { + ohci_err(ohci, "can't start\n"); + ohci_stop(hcd); + } + + return err; +} + +static const struct hc_driver ohci_platform_hc_driver = { + .description = hcd_name, + .product_desc = "Generic Platform OHCI Controller", + .hcd_priv_size = sizeof(struct ohci_hcd), + + .irq = ohci_irq, + .flags = HCD_MEMORY | HCD_USB11, + + .reset = ohci_platform_reset, + .start = ohci_platform_start, + .stop = ohci_stop, + .shutdown = ohci_shutdown, + + .urb_enqueue = ohci_urb_enqueue, + .urb_dequeue = ohci_urb_dequeue, + .endpoint_disable = ohci_endpoint_disable, + + .get_frame_number = ohci_get_frame, + + .hub_status_data = ohci_hub_status_data, + .hub_control = ohci_hub_control, +#ifdef CONFIG_PM + .bus_suspend = ohci_bus_suspend, + .bus_resume = ohci_bus_resume, +#endif + + .start_port_reset = ohci_start_port_reset, +}; + +static int __devinit ohci_platform_probe(struct platform_device *dev) +{ + struct usb_hcd *hcd; + struct resource *res_mem; + int irq; + int err = -ENOMEM; + + BUG_ON(!dev->dev.platform_data); + + if (usb_disabled()) + return -ENODEV; + + irq = platform_get_irq(dev, 0); + if (irq < 0) { + pr_err("no irq provieded"); + return irq; + } + + res_mem = platform_get_resource(dev, IORESOURCE_MEM, 0); + if (!res_mem) { + pr_err("no memory recourse provieded"); + return -ENXIO; + } + + hcd = usb_create_hcd(&ohci_platform_hc_driver, &dev->dev, + dev_name(&dev->dev)); + if (!hcd) + return -ENOMEM; + + hcd->rsrc_start = res_mem->start; + hcd->rsrc_len = resource_size(res_mem); + + if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { + pr_err("controller already in use"); + err = -EBUSY; + goto err_put_hcd; + } + + hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len); + if (!hcd->regs) + goto err_release_region; + err = usb_add_hcd(hcd, irq, IRQF_SHARED); + if (err) + goto err_iounmap; + + platform_set_drvdata(dev, hcd); + + return err; + +err_iounmap: + iounmap(hcd->regs); +err_release_region: + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); +err_put_hcd: + usb_put_hcd(hcd); + return err; +} + +static int __devexit ohci_platform_remove(struct platform_device *dev) +{ + struct usb_hcd *hcd = platform_get_drvdata(dev); + + usb_remove_hcd(hcd); + iounmap(hcd->regs); + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); + usb_put_hcd(hcd); + platform_set_drvdata(dev, NULL); + + return 0; +} + +#ifdef CONFIG_PM + +static int ohci_platform_suspend(struct device *dev) +{ + return 0; +} + +static int ohci_platform_resume(struct device *dev) +{ + struct usb_hcd *hcd = dev_get_drvdata(dev); + + ohci_finish_controller_resume(hcd); + return 0; +} + +#else /* !CONFIG_PM */ +#define ohci_platform_suspend NULL +#define ohci_platform_resume NULL +#endif /* CONFIG_PM */ + +static const struct platform_device_id ohci_platform_table[] = { + { "ohci-platform", 0 }, + { } +}; +MODULE_DEVICE_TABLE(platform, ohci_platform_table); + +static const struct dev_pm_ops ohci_platform_pm_ops = { + .suspend = ohci_platform_suspend, + .resume = ohci_platform_resume, +}; + +static struct platform_driver ohci_platform_driver = { + .id_table = ohci_platform_table, + .probe = ohci_platform_probe, + .remove = __devexit_p(ohci_platform_remove), + .shutdown = usb_hcd_platform_shutdown, + .driver = { + .owner = THIS_MODULE, + .name = "ohci-platform", + .pm = &ohci_platform_pm_ops, + } +}; diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index 6313e4439f3..c31b2815be1 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -23,6 +23,7 @@ #include <linux/signal.h> #include <linux/platform_device.h> #include <linux/clk.h> +#include <mach/hardware.h> #include <mach/ohci.h> #include <mach/pxa3xx-u2d.h> @@ -218,7 +219,7 @@ static int pxa27x_start_hc(struct pxa27x_ohci *ohci, struct device *dev) inf = dev->platform_data; - clk_enable(ohci->clk); + clk_prepare_enable(ohci->clk); pxa27x_reset_hc(ohci); @@ -268,7 +269,7 @@ static void pxa27x_stop_hc(struct pxa27x_ohci *ohci, struct device *dev) __raw_writel(uhccoms, ohci->mmio_base + UHCCOMS); udelay(10); - clk_disable(ohci->clk); + clk_disable_unprepare(ohci->clk); } diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c index 4bde4f9821b..e1004fb37bd 100644 --- a/drivers/usb/host/ohci-sa1111.c +++ b/drivers/usb/host/ohci-sa1111.c @@ -16,29 +16,115 @@ #include <mach/hardware.h> #include <asm/mach-types.h> #include <mach/assabet.h> -#include <mach/badge4.h> #include <asm/hardware/sa1111.h> #ifndef CONFIG_SA1111 #error "This file is SA-1111 bus glue. CONFIG_SA1111 must be defined." #endif -extern int usb_disabled(void); +#define USB_STATUS 0x0118 +#define USB_RESET 0x011c +#define USB_IRQTEST 0x0120 + +#define USB_RESET_FORCEIFRESET (1 << 0) +#define USB_RESET_FORCEHCRESET (1 << 1) +#define USB_RESET_CLKGENRESET (1 << 2) +#define USB_RESET_SIMSCALEDOWN (1 << 3) +#define USB_RESET_USBINTTEST (1 << 4) +#define USB_RESET_SLEEPSTBYEN (1 << 5) +#define USB_RESET_PWRSENSELOW (1 << 6) +#define USB_RESET_PWRCTRLLOW (1 << 7) + +#define USB_STATUS_IRQHCIRMTWKUP (1 << 7) +#define USB_STATUS_IRQHCIBUFFACC (1 << 8) +#define USB_STATUS_NIRQHCIM (1 << 9) +#define USB_STATUS_NHCIMFCLR (1 << 10) +#define USB_STATUS_USBPWRSENSE (1 << 11) -/*-------------------------------------------------------------------------*/ +#if 0 +static void dump_hci_status(struct usb_hcd *hcd, const char *label) +{ + unsigned long status = sa1111_readl(hcd->regs + USB_STATUS); + + dbg("%s USB_STATUS = { %s%s%s%s%s}", label, + ((status & USB_STATUS_IRQHCIRMTWKUP) ? "IRQHCIRMTWKUP " : ""), + ((status & USB_STATUS_IRQHCIBUFFACC) ? "IRQHCIBUFFACC " : ""), + ((status & USB_STATUS_NIRQHCIM) ? "" : "IRQHCIM "), + ((status & USB_STATUS_NHCIMFCLR) ? "" : "HCIMFCLR "), + ((status & USB_STATUS_USBPWRSENSE) ? "USBPWRSENSE " : "")); +} +#endif -static void sa1111_start_hc(struct sa1111_dev *dev) +static int ohci_sa1111_reset(struct usb_hcd *hcd) { - unsigned int usb_rst = 0; + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + + ohci_hcd_init(ohci); + return ohci_init(ohci); +} - printk(KERN_DEBUG "%s: starting SA-1111 OHCI USB Controller\n", - __FILE__); +static int __devinit ohci_sa1111_start(struct usb_hcd *hcd) +{ + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + int ret; -#ifdef CONFIG_SA1100_BADGE4 - if (machine_is_badge4()) { - badge4_set_5V(BADGE4_5V_USB, 1); + ret = ohci_run(ohci); + if (ret < 0) { + ohci_err(ohci, "can't start\n"); + ohci_stop(hcd); } + return ret; +} + +static const struct hc_driver ohci_sa1111_hc_driver = { + .description = hcd_name, + .product_desc = "SA-1111 OHCI", + .hcd_priv_size = sizeof(struct ohci_hcd), + + /* + * generic hardware linkage + */ + .irq = ohci_irq, + .flags = HCD_USB11 | HCD_MEMORY, + + /* + * basic lifecycle operations + */ + .reset = ohci_sa1111_reset, + .start = ohci_sa1111_start, + .stop = ohci_stop, + .shutdown = ohci_shutdown, + + /* + * managing i/o requests and associated device resources + */ + .urb_enqueue = ohci_urb_enqueue, + .urb_dequeue = ohci_urb_dequeue, + .endpoint_disable = ohci_endpoint_disable, + + /* + * scheduling support + */ + .get_frame_number = ohci_get_frame, + + /* + * root hub support + */ + .hub_status_data = ohci_hub_status_data, + .hub_control = ohci_hub_control, +#ifdef CONFIG_PM + .bus_suspend = ohci_bus_suspend, + .bus_resume = ohci_bus_resume, #endif + .start_port_reset = ohci_start_port_reset, +}; + +static int sa1111_start_hc(struct sa1111_dev *dev) +{ + unsigned int usb_rst = 0; + int ret; + + dev_dbg(&dev->dev, "starting SA-1111 OHCI USB Controller\n"); if (machine_is_xp860() || machine_has_neponset() || @@ -51,220 +137,121 @@ static void sa1111_start_hc(struct sa1111_dev *dev) * host controller in reset. */ sa1111_writel(usb_rst | USB_RESET_FORCEIFRESET | USB_RESET_FORCEHCRESET, - dev->mapbase + SA1111_USB_RESET); + dev->mapbase + USB_RESET); /* * Now, carefully enable the USB clock, and take * the USB host controller out of reset. */ - sa1111_enable_device(dev); - udelay(11); - sa1111_writel(usb_rst, dev->mapbase + SA1111_USB_RESET); + ret = sa1111_enable_device(dev); + if (ret == 0) { + udelay(11); + sa1111_writel(usb_rst, dev->mapbase + USB_RESET); + } + + return ret; } static void sa1111_stop_hc(struct sa1111_dev *dev) { unsigned int usb_rst; - printk(KERN_DEBUG "%s: stopping SA-1111 OHCI USB Controller\n", - __FILE__); + + dev_dbg(&dev->dev, "stopping SA-1111 OHCI USB Controller\n"); /* * Put the USB host controller into reset. */ - usb_rst = sa1111_readl(dev->mapbase + SA1111_USB_RESET); + usb_rst = sa1111_readl(dev->mapbase + USB_RESET); sa1111_writel(usb_rst | USB_RESET_FORCEIFRESET | USB_RESET_FORCEHCRESET, - dev->mapbase + SA1111_USB_RESET); + dev->mapbase + USB_RESET); /* * Stop the USB clock. */ sa1111_disable_device(dev); - -#ifdef CONFIG_SA1100_BADGE4 - if (machine_is_badge4()) { - /* Disable power to the USB bus */ - badge4_set_5V(BADGE4_5V_USB, 0); - } -#endif -} - - -/*-------------------------------------------------------------------------*/ - -#if 0 -static void dump_hci_status(struct usb_hcd *hcd, const char *label) -{ - unsigned long status = sa1111_readl(hcd->regs + SA1111_USB_STATUS); - - dbg ("%s USB_STATUS = { %s%s%s%s%s}", label, - ((status & USB_STATUS_IRQHCIRMTWKUP) ? "IRQHCIRMTWKUP " : ""), - ((status & USB_STATUS_IRQHCIBUFFACC) ? "IRQHCIBUFFACC " : ""), - ((status & USB_STATUS_NIRQHCIM) ? "" : "IRQHCIM "), - ((status & USB_STATUS_NHCIMFCLR) ? "" : "HCIMFCLR "), - ((status & USB_STATUS_USBPWRSENSE) ? "USBPWRSENSE " : "")); } -#endif - -/*-------------------------------------------------------------------------*/ - -/* configure so an HC device and id are always provided */ -/* always called with process context; sleeping is OK */ - /** - * usb_hcd_sa1111_probe - initialize SA-1111-based HCDs - * Context: !in_interrupt() + * ohci_hcd_sa1111_probe - initialize SA-1111-based HCDs * * Allocates basic resources for this USB host controller, and - * then invokes the start() method for the HCD associated with it - * through the hotplug entry's driver_data. - * - * Store this function in the HCD's struct pci_driver as probe(). + * then invokes the start() method for the HCD associated with it. */ -int usb_hcd_sa1111_probe (const struct hc_driver *driver, - struct sa1111_dev *dev) +static int ohci_hcd_sa1111_probe(struct sa1111_dev *dev) { struct usb_hcd *hcd; - int retval; + int ret; - hcd = usb_create_hcd (driver, &dev->dev, "sa1111"); + if (usb_disabled()) + return -ENODEV; + + hcd = usb_create_hcd(&ohci_sa1111_hc_driver, &dev->dev, "sa1111"); if (!hcd) return -ENOMEM; + hcd->rsrc_start = dev->res.start; hcd->rsrc_len = resource_size(&dev->res); if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { dbg("request_mem_region failed"); - retval = -EBUSY; + ret = -EBUSY; goto err1; } + hcd->regs = dev->mapbase; - sa1111_start_hc(dev); - ohci_hcd_init(hcd_to_ohci(hcd)); + ret = sa1111_start_hc(dev); + if (ret) + goto err2; - retval = usb_add_hcd(hcd, dev->irq[1], 0); - if (retval == 0) - return retval; + ret = usb_add_hcd(hcd, dev->irq[1], 0); + if (ret == 0) + return ret; sa1111_stop_hc(dev); + err2: release_mem_region(hcd->rsrc_start, hcd->rsrc_len); err1: usb_put_hcd(hcd); - return retval; + return ret; } - -/* may be called without controller electrically present */ -/* may be called with controller, bus, and devices active */ - /** - * usb_hcd_sa1111_remove - shutdown processing for SA-1111-based HCDs + * ohci_hcd_sa1111_remove - shutdown processing for SA-1111-based HCDs * @dev: USB Host Controller being removed - * Context: !in_interrupt() - * - * Reverses the effect of usb_hcd_sa1111_probe(), first invoking - * the HCD's stop() method. It is always called from a thread - * context, normally "rmmod", "apmd", or something similar. * + * Reverses the effect of ohci_hcd_sa1111_probe(), first invoking + * the HCD's stop() method. */ -void usb_hcd_sa1111_remove (struct usb_hcd *hcd, struct sa1111_dev *dev) +static int ohci_hcd_sa1111_remove(struct sa1111_dev *dev) { + struct usb_hcd *hcd = sa1111_get_drvdata(dev); + usb_remove_hcd(hcd); sa1111_stop_hc(dev); release_mem_region(hcd->rsrc_start, hcd->rsrc_len); usb_put_hcd(hcd); -} - -/*-------------------------------------------------------------------------*/ -static int __devinit -ohci_sa1111_start (struct usb_hcd *hcd) -{ - struct ohci_hcd *ohci = hcd_to_ohci (hcd); - int ret; - - if ((ret = ohci_init(ohci)) < 0) - return ret; - - if ((ret = ohci_run (ohci)) < 0) { - err ("can't start %s", hcd->self.bus_name); - ohci_stop (hcd); - return ret; - } return 0; } -/*-------------------------------------------------------------------------*/ - -static const struct hc_driver ohci_sa1111_hc_driver = { - .description = hcd_name, - .product_desc = "SA-1111 OHCI", - .hcd_priv_size = sizeof(struct ohci_hcd), - - /* - * generic hardware linkage - */ - .irq = ohci_irq, - .flags = HCD_USB11 | HCD_MEMORY, - - /* - * basic lifecycle operations - */ - .start = ohci_sa1111_start, - .stop = ohci_stop, - - /* - * managing i/o requests and associated device resources - */ - .urb_enqueue = ohci_urb_enqueue, - .urb_dequeue = ohci_urb_dequeue, - .endpoint_disable = ohci_endpoint_disable, - - /* - * scheduling support - */ - .get_frame_number = ohci_get_frame, - - /* - * root hub support - */ - .hub_status_data = ohci_hub_status_data, - .hub_control = ohci_hub_control, -#ifdef CONFIG_PM - .bus_suspend = ohci_bus_suspend, - .bus_resume = ohci_bus_resume, -#endif - .start_port_reset = ohci_start_port_reset, -}; - -/*-------------------------------------------------------------------------*/ - -static int ohci_hcd_sa1111_drv_probe(struct sa1111_dev *dev) -{ - int ret; - - if (usb_disabled()) - return -ENODEV; - - ret = usb_hcd_sa1111_probe(&ohci_sa1111_hc_driver, dev); - return ret; -} - -static int ohci_hcd_sa1111_drv_remove(struct sa1111_dev *dev) +static void ohci_hcd_sa1111_shutdown(struct sa1111_dev *dev) { struct usb_hcd *hcd = sa1111_get_drvdata(dev); - usb_hcd_sa1111_remove(hcd, dev); - return 0; + if (test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) { + hcd->driver->shutdown(hcd); + sa1111_stop_hc(dev); + } } static struct sa1111_driver ohci_hcd_sa1111_driver = { .drv = { .name = "sa1111-ohci", + .owner = THIS_MODULE, }, .devid = SA1111_DEVID_USB, - .probe = ohci_hcd_sa1111_drv_probe, - .remove = ohci_hcd_sa1111_drv_remove, + .probe = ohci_hcd_sa1111_probe, + .remove = ohci_hcd_sa1111_remove, + .shutdown = ohci_hcd_sa1111_shutdown, }; - diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h index 8ff6f7ea96f..1b19aea25a2 100644 --- a/drivers/usb/host/ohci.h +++ b/drivers/usb/host/ohci.h @@ -376,7 +376,7 @@ struct ohci_hcd { * OTG controllers and transceivers need software interaction; * other external transceivers should be software-transparent */ - struct otg_transceiver *transceiver; + struct usb_phy *transceiver; void (*start_hnp)(struct ohci_hcd *ohci); /* diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c index 015c7c62ed4..3b38030b02a 100644 --- a/drivers/usb/host/oxu210hp-hcd.c +++ b/drivers/usb/host/oxu210hp-hcd.c @@ -40,7 +40,6 @@ #include <linux/io.h> #include <asm/irq.h> -#include <asm/system.h> #include <asm/unaligned.h> #include <linux/irq.h> diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index 7732d69e49e..11de5f1be98 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -893,4 +893,5 @@ static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev) quirk_usb_handoff_xhci(pdev); pci_disable_device(pdev); } -DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff); +DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_SERIAL_USB, 8, quirk_usb_early_handoff); diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index e84ca1928db..2bf1320dc9c 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -2428,6 +2428,9 @@ static int __devinit r8a66597_probe(struct platform_device *pdev) int i; unsigned long irq_trigger; + if (usb_disabled()) + return -ENODEV; + if (pdev->dev.dma_mask) { ret = -EINVAL; dev_err(&pdev->dev, "dma not supported\n"); @@ -2552,20 +2555,4 @@ static struct platform_driver r8a66597_driver = { }, }; -static int __init r8a66597_init(void) -{ - if (usb_disabled()) - return -ENODEV; - - printk(KERN_INFO KBUILD_MODNAME ": driver %s, %s\n", hcd_name, - DRIVER_VERSION); - return platform_driver_register(&r8a66597_driver); -} -module_init(r8a66597_init); - -static void __exit r8a66597_cleanup(void) -{ - platform_driver_unregister(&r8a66597_driver); -} -module_exit(r8a66597_cleanup); - +module_platform_driver(r8a66597_driver); diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index 961d6638d8f..91ce1c02e61 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -51,7 +51,6 @@ #include <asm/io.h> #include <asm/irq.h> -#include <asm/system.h> #include <asm/byteorder.h> #include <asm/unaligned.h> @@ -1632,6 +1631,9 @@ sl811h_probe(struct platform_device *dev) u8 tmp, ioaddr = 0; unsigned long irqflags; + if (usb_disabled()) + return -ENODEV; + /* basic sanity checks first. board-specific init logic should * have initialized these three resources and probably board * specific platform_data. we don't probe for IRQs, and do only @@ -1817,20 +1819,4 @@ struct platform_driver sl811h_driver = { }; EXPORT_SYMBOL(sl811h_driver); -/*-------------------------------------------------------------------------*/ - -static int __init sl811h_init(void) -{ - if (usb_disabled()) - return -ENODEV; - - INFO("driver %s, %s\n", hcd_name, DRIVER_VERSION); - return platform_driver_register(&sl811h_driver); -} -module_init(sl811h_init); - -static void __exit sl811h_cleanup(void) -{ - platform_driver_unregister(&sl811h_driver); -} -module_exit(sl811h_cleanup); +module_platform_driver(sl811h_driver); diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c index 16dd6a6abf0..dbbd1ba2522 100644 --- a/drivers/usb/host/u132-hcd.c +++ b/drivers/usb/host/u132-hcd.c @@ -55,7 +55,6 @@ #include <linux/mutex.h> #include <asm/io.h> #include <asm/irq.h> -#include <asm/system.h> #include <asm/byteorder.h> /* FIXME ohci.h is ONLY for internal use by the OHCI driver. diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index 6b5eb1017e2..e4db350602b 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -45,7 +45,6 @@ #include <asm/uaccess.h> #include <asm/io.h> #include <asm/irq.h> -#include <asm/system.h> #include "uhci-hcd.h" @@ -565,6 +564,9 @@ static int uhci_start(struct usb_hcd *hcd) struct dentry __maybe_unused *dentry; hcd->uses_new_polling = 1; + /* Accept arbitrarily long scatter-gather lists */ + if (!(hcd->driver->flags & HCD_LOCAL_MEM)) + hcd->self.sg_tablesize = ~0; spin_lock_init(&uhci->lock); setup_timer(&uhci->fsbr_timer, uhci_fsbr_timeout, diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 557b6f32db8..673ad120c43 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -422,6 +422,32 @@ void xhci_set_link_state(struct xhci_hcd *xhci, __le32 __iomem **port_array, xhci_writel(xhci, temp, port_array[port_id]); } +void xhci_set_remote_wake_mask(struct xhci_hcd *xhci, + __le32 __iomem **port_array, int port_id, u16 wake_mask) +{ + u32 temp; + + temp = xhci_readl(xhci, port_array[port_id]); + temp = xhci_port_state_to_neutral(temp); + + if (wake_mask & USB_PORT_FEAT_REMOTE_WAKE_CONNECT) + temp |= PORT_WKCONN_E; + else + temp &= ~PORT_WKCONN_E; + + if (wake_mask & USB_PORT_FEAT_REMOTE_WAKE_DISCONNECT) + temp |= PORT_WKDISC_E; + else + temp &= ~PORT_WKDISC_E; + + if (wake_mask & USB_PORT_FEAT_REMOTE_WAKE_OVER_CURRENT) + temp |= PORT_WKOC_E; + else + temp &= ~PORT_WKOC_E; + + xhci_writel(xhci, temp, port_array[port_id]); +} + /* Test and clear port RWC bit */ void xhci_test_and_clear_bit(struct xhci_hcd *xhci, __le32 __iomem **port_array, int port_id, u32 port_bit) @@ -448,6 +474,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, int slot_id; struct xhci_bus_state *bus_state; u16 link_state = 0; + u16 wake_mask = 0; max_ports = xhci_get_ports(hcd, &port_array); bus_state = &xhci->bus_state[hcd_index(hcd)]; @@ -593,6 +620,8 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, case SetPortFeature: if (wValue == USB_PORT_FEAT_LINK_STATE) link_state = (wIndex & 0xff00) >> 3; + if (wValue == USB_PORT_FEAT_REMOTE_WAKE_MASK) + wake_mask = wIndex & 0xff00; wIndex &= 0xff; if (!wIndex || wIndex > max_ports) goto error; @@ -703,6 +732,14 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, temp = xhci_readl(xhci, port_array[wIndex]); xhci_dbg(xhci, "set port reset, actual port %d status = 0x%x\n", wIndex, temp); break; + case USB_PORT_FEAT_REMOTE_WAKE_MASK: + xhci_set_remote_wake_mask(xhci, port_array, + wIndex, wake_mask); + temp = xhci_readl(xhci, port_array[wIndex]); + xhci_dbg(xhci, "set port remote wake mask, " + "actual port %d status = 0x%x\n", + wIndex, temp); + break; case USB_PORT_FEAT_BH_PORT_RESET: temp |= PORT_WR; xhci_writel(xhci, temp, port_array[wIndex]); @@ -883,6 +920,10 @@ int xhci_bus_suspend(struct usb_hcd *hcd) t2 |= PORT_LINK_STROBE | XDEV_U3; set_bit(port_index, &bus_state->bus_suspended); } + /* USB core sets remote wake mask for USB 3.0 hubs, + * including the USB 3.0 roothub, but only if CONFIG_USB_SUSPEND + * is enabled, so also enable remote wake here. + */ if (hcd->self.root_hub->do_remote_wakeup) { if (t1 & PORT_CONNECT) { t2 |= PORT_WKOC_E | PORT_WKDISC_E; diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 383fc857491..cae4c6f2845 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -34,10 +34,12 @@ * Section 4.11.1.1: * "All components of all Command and Transfer TRBs shall be initialized to '0'" */ -static struct xhci_segment *xhci_segment_alloc(struct xhci_hcd *xhci, gfp_t flags) +static struct xhci_segment *xhci_segment_alloc(struct xhci_hcd *xhci, + unsigned int cycle_state, gfp_t flags) { struct xhci_segment *seg; dma_addr_t dma; + int i; seg = kzalloc(sizeof *seg, flags); if (!seg) @@ -50,6 +52,11 @@ static struct xhci_segment *xhci_segment_alloc(struct xhci_hcd *xhci, gfp_t flag } memset(seg->trbs, 0, SEGMENT_SIZE); + /* If the cycle state is 0, set the cycle bit to 1 for all the TRBs */ + if (cycle_state == 0) { + for (i = 0; i < TRBS_PER_SEGMENT; i++) + seg->trbs[i].link.control |= TRB_CYCLE; + } seg->dma = dma; seg->next = NULL; @@ -65,6 +72,20 @@ static void xhci_segment_free(struct xhci_hcd *xhci, struct xhci_segment *seg) kfree(seg); } +static void xhci_free_segments_for_ring(struct xhci_hcd *xhci, + struct xhci_segment *first) +{ + struct xhci_segment *seg; + + seg = first->next; + while (seg != first) { + struct xhci_segment *next = seg->next; + xhci_segment_free(xhci, seg); + seg = next; + } + xhci_segment_free(xhci, first); +} + /* * Make the prev segment point to the next segment. * @@ -73,14 +94,14 @@ static void xhci_segment_free(struct xhci_hcd *xhci, struct xhci_segment *seg) * related flags, such as End TRB, Toggle Cycle, and no snoop. */ static void xhci_link_segments(struct xhci_hcd *xhci, struct xhci_segment *prev, - struct xhci_segment *next, bool link_trbs, bool isoc) + struct xhci_segment *next, enum xhci_ring_type type) { u32 val; if (!prev || !next) return; prev->next = next; - if (link_trbs) { + if (type != TYPE_EVENT) { prev->trbs[TRBS_PER_SEGMENT-1].link.segment_ptr = cpu_to_le64(next->dma); @@ -91,35 +112,55 @@ static void xhci_link_segments(struct xhci_hcd *xhci, struct xhci_segment *prev, /* Always set the chain bit with 0.95 hardware */ /* Set chain bit for isoc rings on AMD 0.96 host */ if (xhci_link_trb_quirk(xhci) || - (isoc && (xhci->quirks & XHCI_AMD_0x96_HOST))) + (type == TYPE_ISOC && + (xhci->quirks & XHCI_AMD_0x96_HOST))) val |= TRB_CHAIN; prev->trbs[TRBS_PER_SEGMENT-1].link.control = cpu_to_le32(val); } } +/* + * Link the ring to the new segments. + * Set Toggle Cycle for the new ring if needed. + */ +static void xhci_link_rings(struct xhci_hcd *xhci, struct xhci_ring *ring, + struct xhci_segment *first, struct xhci_segment *last, + unsigned int num_segs) +{ + struct xhci_segment *next; + + if (!ring || !first || !last) + return; + + next = ring->enq_seg->next; + xhci_link_segments(xhci, ring->enq_seg, first, ring->type); + xhci_link_segments(xhci, last, next, ring->type); + ring->num_segs += num_segs; + ring->num_trbs_free += (TRBS_PER_SEGMENT - 1) * num_segs; + + if (ring->type != TYPE_EVENT && ring->enq_seg == ring->last_seg) { + ring->last_seg->trbs[TRBS_PER_SEGMENT-1].link.control + &= ~cpu_to_le32(LINK_TOGGLE); + last->trbs[TRBS_PER_SEGMENT-1].link.control + |= cpu_to_le32(LINK_TOGGLE); + ring->last_seg = last; + } +} + /* XXX: Do we need the hcd structure in all these functions? */ void xhci_ring_free(struct xhci_hcd *xhci, struct xhci_ring *ring) { - struct xhci_segment *seg; - struct xhci_segment *first_seg; - if (!ring) return; - if (ring->first_seg) { - first_seg = ring->first_seg; - seg = first_seg->next; - while (seg != first_seg) { - struct xhci_segment *next = seg->next; - xhci_segment_free(xhci, seg); - seg = next; - } - xhci_segment_free(xhci, first_seg); - ring->first_seg = NULL; - } + + if (ring->first_seg) + xhci_free_segments_for_ring(xhci, ring->first_seg); + kfree(ring); } -static void xhci_initialize_ring_info(struct xhci_ring *ring) +static void xhci_initialize_ring_info(struct xhci_ring *ring, + unsigned int cycle_state) { /* The ring is empty, so the enqueue pointer == dequeue pointer */ ring->enqueue = ring->first_seg->trbs; @@ -129,11 +170,53 @@ static void xhci_initialize_ring_info(struct xhci_ring *ring) /* The ring is initialized to 0. The producer must write 1 to the cycle * bit to handover ownership of the TRB, so PCS = 1. The consumer must * compare CCS to the cycle bit to check ownership, so CCS = 1. + * + * New rings are initialized with cycle state equal to 1; if we are + * handling ring expansion, set the cycle state equal to the old ring. */ - ring->cycle_state = 1; + ring->cycle_state = cycle_state; /* Not necessary for new rings, but needed for re-initialized rings */ ring->enq_updates = 0; ring->deq_updates = 0; + + /* + * Each segment has a link TRB, and leave an extra TRB for SW + * accounting purpose + */ + ring->num_trbs_free = ring->num_segs * (TRBS_PER_SEGMENT - 1) - 1; +} + +/* Allocate segments and link them for a ring */ +static int xhci_alloc_segments_for_ring(struct xhci_hcd *xhci, + struct xhci_segment **first, struct xhci_segment **last, + unsigned int num_segs, unsigned int cycle_state, + enum xhci_ring_type type, gfp_t flags) +{ + struct xhci_segment *prev; + + prev = xhci_segment_alloc(xhci, cycle_state, flags); + if (!prev) + return -ENOMEM; + num_segs--; + + *first = prev; + while (num_segs > 0) { + struct xhci_segment *next; + + next = xhci_segment_alloc(xhci, cycle_state, flags); + if (!next) { + xhci_free_segments_for_ring(xhci, *first); + return -ENOMEM; + } + xhci_link_segments(xhci, prev, next, type); + + prev = next; + num_segs--; + } + xhci_link_segments(xhci, prev, *first, type); + *last = prev; + + return 0; } /** @@ -144,44 +227,34 @@ static void xhci_initialize_ring_info(struct xhci_ring *ring) * See section 4.9.1 and figures 15 and 16. */ static struct xhci_ring *xhci_ring_alloc(struct xhci_hcd *xhci, - unsigned int num_segs, bool link_trbs, bool isoc, gfp_t flags) + unsigned int num_segs, unsigned int cycle_state, + enum xhci_ring_type type, gfp_t flags) { struct xhci_ring *ring; - struct xhci_segment *prev; + int ret; ring = kzalloc(sizeof *(ring), flags); if (!ring) return NULL; + ring->num_segs = num_segs; INIT_LIST_HEAD(&ring->td_list); + ring->type = type; if (num_segs == 0) return ring; - ring->first_seg = xhci_segment_alloc(xhci, flags); - if (!ring->first_seg) + ret = xhci_alloc_segments_for_ring(xhci, &ring->first_seg, + &ring->last_seg, num_segs, cycle_state, type, flags); + if (ret) goto fail; - num_segs--; - prev = ring->first_seg; - while (num_segs > 0) { - struct xhci_segment *next; - - next = xhci_segment_alloc(xhci, flags); - if (!next) - goto fail; - xhci_link_segments(xhci, prev, next, link_trbs, isoc); - - prev = next; - num_segs--; - } - xhci_link_segments(xhci, prev, ring->first_seg, link_trbs, isoc); - - if (link_trbs) { + /* Only event ring does not use link TRB */ + if (type != TYPE_EVENT) { /* See section 4.9.2.1 and 6.4.4.1 */ - prev->trbs[TRBS_PER_SEGMENT-1].link.control |= + ring->last_seg->trbs[TRBS_PER_SEGMENT - 1].link.control |= cpu_to_le32(LINK_TOGGLE); } - xhci_initialize_ring_info(ring); + xhci_initialize_ring_info(ring, cycle_state); return ring; fail: @@ -217,23 +290,64 @@ void xhci_free_or_cache_endpoint_ring(struct xhci_hcd *xhci, * pointers to the beginning of the ring. */ static void xhci_reinit_cached_ring(struct xhci_hcd *xhci, - struct xhci_ring *ring, bool isoc) + struct xhci_ring *ring, unsigned int cycle_state, + enum xhci_ring_type type) { struct xhci_segment *seg = ring->first_seg; + int i; + do { memset(seg->trbs, 0, sizeof(union xhci_trb)*TRBS_PER_SEGMENT); + if (cycle_state == 0) { + for (i = 0; i < TRBS_PER_SEGMENT; i++) + seg->trbs[i].link.control |= TRB_CYCLE; + } /* All endpoint rings have link TRBs */ - xhci_link_segments(xhci, seg, seg->next, 1, isoc); + xhci_link_segments(xhci, seg, seg->next, type); seg = seg->next; } while (seg != ring->first_seg); - xhci_initialize_ring_info(ring); + ring->type = type; + xhci_initialize_ring_info(ring, cycle_state); /* td list should be empty since all URBs have been cancelled, * but just in case... */ INIT_LIST_HEAD(&ring->td_list); } +/* + * Expand an existing ring. + * Look for a cached ring or allocate a new ring which has same segment numbers + * and link the two rings. + */ +int xhci_ring_expansion(struct xhci_hcd *xhci, struct xhci_ring *ring, + unsigned int num_trbs, gfp_t flags) +{ + struct xhci_segment *first; + struct xhci_segment *last; + unsigned int num_segs; + unsigned int num_segs_needed; + int ret; + + num_segs_needed = (num_trbs + (TRBS_PER_SEGMENT - 1) - 1) / + (TRBS_PER_SEGMENT - 1); + + /* Allocate number of segments we needed, or double the ring size */ + num_segs = ring->num_segs > num_segs_needed ? + ring->num_segs : num_segs_needed; + + ret = xhci_alloc_segments_for_ring(xhci, &first, &last, + num_segs, ring->cycle_state, ring->type, flags); + if (ret) + return -ENOMEM; + + xhci_link_rings(xhci, ring, first, last, num_segs); + xhci_dbg(xhci, "ring expansion succeed, now has %d segments\n", + ring->num_segs); + + return 0; +} + #define CTX_SIZE(_hcc) (HCC_64BYTE_CONTEXT(_hcc) ? 64 : 32) static struct xhci_container_ctx *xhci_alloc_container_ctx(struct xhci_hcd *xhci, @@ -528,7 +642,7 @@ struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci, */ for (cur_stream = 1; cur_stream < num_streams; cur_stream++) { stream_info->stream_rings[cur_stream] = - xhci_ring_alloc(xhci, 1, true, false, mem_flags); + xhci_ring_alloc(xhci, 2, 1, TYPE_STREAM, mem_flags); cur_ring = stream_info->stream_rings[cur_stream]; if (!cur_ring) goto cleanup_rings; @@ -862,7 +976,7 @@ int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id, } /* Allocate endpoint 0 ring */ - dev->eps[0].ring = xhci_ring_alloc(xhci, 1, true, false, flags); + dev->eps[0].ring = xhci_ring_alloc(xhci, 2, 1, TYPE_CTRL, flags); if (!dev->eps[0].ring) goto fail; @@ -1300,24 +1414,16 @@ int xhci_endpoint_init(struct xhci_hcd *xhci, struct xhci_ring *ep_ring; unsigned int max_packet; unsigned int max_burst; + enum xhci_ring_type type; u32 max_esit_payload; ep_index = xhci_get_endpoint_index(&ep->desc); ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index); + type = usb_endpoint_type(&ep->desc); /* Set up the endpoint ring */ - /* - * Isochronous endpoint ring needs bigger size because one isoc URB - * carries multiple packets and it will insert multiple tds to the - * ring. - * This should be replaced with dynamic ring resizing in the future. - */ - if (usb_endpoint_xfer_isoc(&ep->desc)) - virt_dev->eps[ep_index].new_ring = - xhci_ring_alloc(xhci, 8, true, true, mem_flags); - else - virt_dev->eps[ep_index].new_ring = - xhci_ring_alloc(xhci, 1, true, false, mem_flags); + virt_dev->eps[ep_index].new_ring = + xhci_ring_alloc(xhci, 2, 1, type, mem_flags); if (!virt_dev->eps[ep_index].new_ring) { /* Attempt to use the ring cache */ if (virt_dev->num_rings_cached == 0) @@ -1327,7 +1433,7 @@ int xhci_endpoint_init(struct xhci_hcd *xhci, virt_dev->ring_cache[virt_dev->num_rings_cached] = NULL; virt_dev->num_rings_cached--; xhci_reinit_cached_ring(xhci, virt_dev->eps[ep_index].new_ring, - usb_endpoint_xfer_isoc(&ep->desc) ? true : false); + 1, type); } virt_dev->eps[ep_index].skip = false; ep_ring = virt_dev->eps[ep_index].new_ring; @@ -2157,7 +2263,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) unsigned int val, val2; u64 val_64; struct xhci_segment *seg; - u32 page_size; + u32 page_size, temp; int i; page_size = xhci_readl(xhci, &xhci->op_regs->page_size); @@ -2235,7 +2341,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) goto fail; /* Set up the command ring to have one segments for now. */ - xhci->cmd_ring = xhci_ring_alloc(xhci, 1, true, false, flags); + xhci->cmd_ring = xhci_ring_alloc(xhci, 1, 1, TYPE_COMMAND, flags); if (!xhci->cmd_ring) goto fail; xhci_dbg(xhci, "Allocated command ring at %p\n", xhci->cmd_ring); @@ -2266,7 +2372,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) * the event ring segment table (ERST). Section 4.9.3. */ xhci_dbg(xhci, "// Allocating event ring\n"); - xhci->event_ring = xhci_ring_alloc(xhci, ERST_NUM_SEGS, false, false, + xhci->event_ring = xhci_ring_alloc(xhci, ERST_NUM_SEGS, 1, TYPE_EVENT, flags); if (!xhci->event_ring) goto fail; @@ -2340,6 +2446,15 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) INIT_LIST_HEAD(&xhci->lpm_failed_devs); + /* Enable USB 3.0 device notifications for function remote wake, which + * is necessary for allowing USB 3.0 devices to do remote wakeup from + * U3 (device suspend). + */ + temp = xhci_readl(xhci, &xhci->op_regs->dev_notification); + temp &= ~DEV_NOTE_MASK; + temp |= DEV_NOTE_FWAKE; + xhci_writel(xhci, temp, &xhci->op_regs->dev_notification); + return 0; fail: diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c new file mode 100644 index 00000000000..689bc18b051 --- /dev/null +++ b/drivers/usb/host/xhci-plat.c @@ -0,0 +1,205 @@ +/* + * xhci-plat.c - xHCI host controller driver platform Bus Glue. + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com + * Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de> + * + * A lot of code borrowed from the Linux xHCI driver. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + */ + +#include <linux/platform_device.h> +#include <linux/module.h> +#include <linux/slab.h> + +#include "xhci.h" + +static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci) +{ + /* + * As of now platform drivers don't provide MSI support so we ensure + * here that the generic code does not try to make a pci_dev from our + * dev struct in order to setup MSI + */ + xhci->quirks |= XHCI_BROKEN_MSI; +} + +/* called during probe() after chip reset completes */ +static int xhci_plat_setup(struct usb_hcd *hcd) +{ + return xhci_gen_setup(hcd, xhci_plat_quirks); +} + +static const struct hc_driver xhci_plat_xhci_driver = { + .description = "xhci-hcd", + .product_desc = "xHCI Host Controller", + .hcd_priv_size = sizeof(struct xhci_hcd *), + + /* + * generic hardware linkage + */ + .irq = xhci_irq, + .flags = HCD_MEMORY | HCD_USB3 | HCD_SHARED, + + /* + * basic lifecycle operations + */ + .reset = xhci_plat_setup, + .start = xhci_run, + .stop = xhci_stop, + .shutdown = xhci_shutdown, + + /* + * managing i/o requests and associated device resources + */ + .urb_enqueue = xhci_urb_enqueue, + .urb_dequeue = xhci_urb_dequeue, + .alloc_dev = xhci_alloc_dev, + .free_dev = xhci_free_dev, + .alloc_streams = xhci_alloc_streams, + .free_streams = xhci_free_streams, + .add_endpoint = xhci_add_endpoint, + .drop_endpoint = xhci_drop_endpoint, + .endpoint_reset = xhci_endpoint_reset, + .check_bandwidth = xhci_check_bandwidth, + .reset_bandwidth = xhci_reset_bandwidth, + .address_device = xhci_address_device, + .update_hub_device = xhci_update_hub_device, + .reset_device = xhci_discover_or_reset_device, + + /* + * scheduling support + */ + .get_frame_number = xhci_get_frame, + + /* Root hub support */ + .hub_control = xhci_hub_control, + .hub_status_data = xhci_hub_status_data, + .bus_suspend = xhci_bus_suspend, + .bus_resume = xhci_bus_resume, +}; + +static int xhci_plat_probe(struct platform_device *pdev) +{ + const struct hc_driver *driver; + struct xhci_hcd *xhci; + struct resource *res; + struct usb_hcd *hcd; + int ret; + int irq; + + if (usb_disabled()) + return -ENODEV; + + driver = &xhci_plat_xhci_driver; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return -ENODEV; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENODEV; + + hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev)); + if (!hcd) + return -ENOMEM; + + hcd->rsrc_start = res->start; + hcd->rsrc_len = resource_size(res); + + if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, + driver->description)) { + dev_dbg(&pdev->dev, "controller already in use\n"); + ret = -EBUSY; + goto put_hcd; + } + + hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); + if (!hcd->regs) { + dev_dbg(&pdev->dev, "error mapping memory\n"); + ret = -EFAULT; + goto release_mem_region; + } + + ret = usb_add_hcd(hcd, irq, IRQF_SHARED); + if (ret) + goto unmap_registers; + + /* USB 2.0 roothub is stored in the platform_device now. */ + hcd = dev_get_drvdata(&pdev->dev); + xhci = hcd_to_xhci(hcd); + xhci->shared_hcd = usb_create_shared_hcd(driver, &pdev->dev, + dev_name(&pdev->dev), hcd); + if (!xhci->shared_hcd) { + ret = -ENOMEM; + goto dealloc_usb2_hcd; + } + + /* + * Set the xHCI pointer before xhci_plat_setup() (aka hcd_driver.reset) + * is called by usb_add_hcd(). + */ + *((struct xhci_hcd **) xhci->shared_hcd->hcd_priv) = xhci; + + ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED); + if (ret) + goto put_usb3_hcd; + + return 0; + +put_usb3_hcd: + usb_put_hcd(xhci->shared_hcd); + +dealloc_usb2_hcd: + usb_remove_hcd(hcd); + +unmap_registers: + iounmap(hcd->regs); + +release_mem_region: + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); + +put_hcd: + usb_put_hcd(hcd); + + return ret; +} + +static int xhci_plat_remove(struct platform_device *dev) +{ + struct usb_hcd *hcd = platform_get_drvdata(dev); + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + + usb_remove_hcd(xhci->shared_hcd); + usb_put_hcd(xhci->shared_hcd); + + usb_remove_hcd(hcd); + iounmap(hcd->regs); + usb_put_hcd(hcd); + kfree(xhci); + + return 0; +} + +static struct platform_driver usb_xhci_driver = { + .probe = xhci_plat_probe, + .remove = xhci_plat_remove, + .driver = { + .name = "xhci-hcd", + }, +}; +MODULE_ALIAS("platform:xhci-hcd"); + +int xhci_register_plat(void) +{ + return platform_driver_register(&usb_xhci_driver); +} + +void xhci_unregister_plat(void) +{ + platform_driver_unregister(&usb_xhci_driver); +} diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index b62037bff68..6bd9d53062e 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -143,17 +143,25 @@ static void next_trb(struct xhci_hcd *xhci, * See Cycle bit rules. SW is the consumer for the event ring only. * Don't make a ring full of link TRBs. That would be dumb and this would loop. */ -static void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer) +static void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring) { - union xhci_trb *next = ++(ring->dequeue); + union xhci_trb *next; unsigned long long addr; ring->deq_updates++; + + /* If this is not event ring, there is one more usable TRB */ + if (ring->type != TYPE_EVENT && + !last_trb(xhci, ring, ring->deq_seg, ring->dequeue)) + ring->num_trbs_free++; + next = ++(ring->dequeue); + /* Update the dequeue pointer further if that was a link TRB or we're at * the end of an event ring segment (which doesn't have link TRBS) */ while (last_trb(xhci, ring, ring->deq_seg, next)) { - if (consumer && last_trb_on_last_seg(xhci, ring, ring->deq_seg, next)) { + if (ring->type == TYPE_EVENT && last_trb_on_last_seg(xhci, + ring, ring->deq_seg, next)) { ring->cycle_state = (ring->cycle_state ? 0 : 1); } ring->deq_seg = ring->deq_seg->next; @@ -181,13 +189,17 @@ static void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer * prepare_transfer()? */ static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, - bool consumer, bool more_trbs_coming, bool isoc) + bool more_trbs_coming) { u32 chain; union xhci_trb *next; unsigned long long addr; chain = le32_to_cpu(ring->enqueue->generic.field[3]) & TRB_CHAIN; + /* If this is not event ring, there is one less usable TRB */ + if (ring->type != TYPE_EVENT && + !last_trb(xhci, ring, ring->enq_seg, ring->enqueue)) + ring->num_trbs_free--; next = ++(ring->enqueue); ring->enq_updates++; @@ -195,35 +207,35 @@ static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, * the end of an event ring segment (which doesn't have link TRBS) */ while (last_trb(xhci, ring, ring->enq_seg, next)) { - if (!consumer) { - if (ring != xhci->event_ring) { - /* - * If the caller doesn't plan on enqueueing more - * TDs before ringing the doorbell, then we - * don't want to give the link TRB to the - * hardware just yet. We'll give the link TRB - * back in prepare_ring() just before we enqueue - * the TD at the top of the ring. - */ - if (!chain && !more_trbs_coming) - break; + if (ring->type != TYPE_EVENT) { + /* + * If the caller doesn't plan on enqueueing more + * TDs before ringing the doorbell, then we + * don't want to give the link TRB to the + * hardware just yet. We'll give the link TRB + * back in prepare_ring() just before we enqueue + * the TD at the top of the ring. + */ + if (!chain && !more_trbs_coming) + break; - /* If we're not dealing with 0.95 hardware or - * isoc rings on AMD 0.96 host, - * carry over the chain bit of the previous TRB - * (which may mean the chain bit is cleared). - */ - if (!(isoc && (xhci->quirks & XHCI_AMD_0x96_HOST)) + /* If we're not dealing with 0.95 hardware or + * isoc rings on AMD 0.96 host, + * carry over the chain bit of the previous TRB + * (which may mean the chain bit is cleared). + */ + if (!(ring->type == TYPE_ISOC && + (xhci->quirks & XHCI_AMD_0x96_HOST)) && !xhci_link_trb_quirk(xhci)) { - next->link.control &= - cpu_to_le32(~TRB_CHAIN); - next->link.control |= - cpu_to_le32(chain); - } - /* Give this link TRB to the hardware */ - wmb(); - next->link.control ^= cpu_to_le32(TRB_CYCLE); + next->link.control &= + cpu_to_le32(~TRB_CHAIN); + next->link.control |= + cpu_to_le32(chain); } + /* Give this link TRB to the hardware */ + wmb(); + next->link.control ^= cpu_to_le32(TRB_CYCLE); + /* Toggle the cycle bit after the last ring segment. */ if (last_trb_on_last_seg(xhci, ring, ring->enq_seg, next)) { ring->cycle_state = (ring->cycle_state ? 0 : 1); @@ -237,55 +249,23 @@ static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, } /* - * Check to see if there's room to enqueue num_trbs on the ring. See rules - * above. - * FIXME: this would be simpler and faster if we just kept track of the number - * of free TRBs in a ring. + * Check to see if there's room to enqueue num_trbs on the ring and make sure + * enqueue pointer will not advance into dequeue segment. See rules above. */ -static int room_on_ring(struct xhci_hcd *xhci, struct xhci_ring *ring, +static inline int room_on_ring(struct xhci_hcd *xhci, struct xhci_ring *ring, unsigned int num_trbs) { - int i; - union xhci_trb *enq = ring->enqueue; - struct xhci_segment *enq_seg = ring->enq_seg; - struct xhci_segment *cur_seg; - unsigned int left_on_ring; - - /* If we are currently pointing to a link TRB, advance the - * enqueue pointer before checking for space */ - while (last_trb(xhci, ring, enq_seg, enq)) { - enq_seg = enq_seg->next; - enq = enq_seg->trbs; - } - - /* Check if ring is empty */ - if (enq == ring->dequeue) { - /* Can't use link trbs */ - left_on_ring = TRBS_PER_SEGMENT - 1; - for (cur_seg = enq_seg->next; cur_seg != enq_seg; - cur_seg = cur_seg->next) - left_on_ring += TRBS_PER_SEGMENT - 1; - - /* Always need one TRB free in the ring. */ - left_on_ring -= 1; - if (num_trbs > left_on_ring) { - xhci_warn(xhci, "Not enough room on ring; " - "need %u TRBs, %u TRBs left\n", - num_trbs, left_on_ring); - return 0; - } - return 1; - } - /* Make sure there's an extra empty TRB available */ - for (i = 0; i <= num_trbs; ++i) { - if (enq == ring->dequeue) + int num_trbs_in_deq_seg; + + if (ring->num_trbs_free < num_trbs) + return 0; + + if (ring->type != TYPE_COMMAND && ring->type != TYPE_EVENT) { + num_trbs_in_deq_seg = ring->dequeue - ring->deq_seg->trbs; + if (ring->num_trbs_free < num_trbs + num_trbs_in_deq_seg) return 0; - enq++; - while (last_trb(xhci, ring, enq_seg, enq)) { - enq_seg = enq_seg->next; - enq = enq_seg->trbs; - } } + return 1; } @@ -892,6 +872,43 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg) xhci_dbg(xhci, "xHCI host controller is dead.\n"); } + +static void update_ring_for_set_deq_completion(struct xhci_hcd *xhci, + struct xhci_virt_device *dev, + struct xhci_ring *ep_ring, + unsigned int ep_index) +{ + union xhci_trb *dequeue_temp; + int num_trbs_free_temp; + bool revert = false; + + num_trbs_free_temp = ep_ring->num_trbs_free; + dequeue_temp = ep_ring->dequeue; + + while (ep_ring->dequeue != dev->eps[ep_index].queued_deq_ptr) { + /* We have more usable TRBs */ + ep_ring->num_trbs_free++; + ep_ring->dequeue++; + if (last_trb(xhci, ep_ring, ep_ring->deq_seg, + ep_ring->dequeue)) { + if (ep_ring->dequeue == + dev->eps[ep_index].queued_deq_ptr) + break; + ep_ring->deq_seg = ep_ring->deq_seg->next; + ep_ring->dequeue = ep_ring->deq_seg->trbs; + } + if (ep_ring->dequeue == dequeue_temp) { + revert = true; + break; + } + } + + if (revert) { + xhci_dbg(xhci, "Unable to find new dequeue pointer\n"); + ep_ring->num_trbs_free = num_trbs_free_temp; + } +} + /* * When we get a completion for a Set Transfer Ring Dequeue Pointer command, * we need to clear the set deq pending flag in the endpoint ring state, so that @@ -973,8 +990,8 @@ static void handle_set_deq_completion(struct xhci_hcd *xhci, /* Update the ring's dequeue segment and dequeue pointer * to reflect the new position. */ - ep_ring->deq_seg = dev->eps[ep_index].queued_deq_seg; - ep_ring->dequeue = dev->eps[ep_index].queued_deq_ptr; + update_ring_for_set_deq_completion(xhci, dev, + ep_ring, ep_index); } else { xhci_warn(xhci, "Mismatch between completed Set TR Deq " "Ptr command & xHCI internal state.\n"); @@ -1185,7 +1202,7 @@ bandwidth_change: xhci->error_bitmask |= 1 << 6; break; } - inc_deq(xhci, xhci->cmd_ring, false); + inc_deq(xhci, xhci->cmd_ring); } static void handle_vendor_event(struct xhci_hcd *xhci, @@ -1237,6 +1254,26 @@ static unsigned int find_faked_portnum_from_hw_portnum(struct usb_hcd *hcd, return num_similar_speed_ports; } +static void handle_device_notification(struct xhci_hcd *xhci, + union xhci_trb *event) +{ + u32 slot_id; + struct usb_device *udev; + + slot_id = TRB_TO_SLOT_ID(event->generic.field[3]); + if (!xhci->devs[slot_id]) { + xhci_warn(xhci, "Device Notification event for " + "unused slot %u\n", slot_id); + return; + } + + xhci_dbg(xhci, "Device Wake Notification event for slot ID %u\n", + slot_id); + udev = xhci->devs[slot_id]->udev; + if (udev && udev->parent) + usb_wakeup_notification(udev->parent, udev->portnum); +} + static void handle_port_status(struct xhci_hcd *xhci, union xhci_trb *event) { @@ -1321,20 +1358,21 @@ static void handle_port_status(struct xhci_hcd *xhci, } if (DEV_SUPERSPEED(temp)) { - xhci_dbg(xhci, "resume SS port %d\n", port_id); + xhci_dbg(xhci, "remote wake SS port %d\n", port_id); + /* Set a flag to say the port signaled remote wakeup, + * so we can tell the difference between the end of + * device and host initiated resume. + */ + bus_state->port_remote_wakeup |= 1 << faked_port_index; + xhci_test_and_clear_bit(xhci, port_array, + faked_port_index, PORT_PLC); xhci_set_link_state(xhci, port_array, faked_port_index, XDEV_U0); - slot_id = xhci_find_slot_id_by_port(hcd, xhci, - faked_port_index + 1); - if (!slot_id) { - xhci_dbg(xhci, "slot_id is zero\n"); - goto cleanup; - } - xhci_ring_device(xhci, slot_id); - xhci_dbg(xhci, "resume SS port %d finished\n", port_id); - /* Clear PORT_PLC */ - xhci_test_and_clear_bit(xhci, port_array, - faked_port_index, PORT_PLC); + /* Need to wait until the next link state change + * indicates the device is actually in U0. + */ + bogus_port_status = true; + goto cleanup; } else { xhci_dbg(xhci, "resume HS port %d\n", port_id); bus_state->resume_done[faked_port_index] = jiffies + @@ -1345,13 +1383,39 @@ static void handle_port_status(struct xhci_hcd *xhci, } } + if ((temp & PORT_PLC) && (temp & PORT_PLS_MASK) == XDEV_U0 && + DEV_SUPERSPEED(temp)) { + xhci_dbg(xhci, "resume SS port %d finished\n", port_id); + /* We've just brought the device into U0 through either the + * Resume state after a device remote wakeup, or through the + * U3Exit state after a host-initiated resume. If it's a device + * initiated remote wake, don't pass up the link state change, + * so the roothub behavior is consistent with external + * USB 3.0 hub behavior. + */ + slot_id = xhci_find_slot_id_by_port(hcd, xhci, + faked_port_index + 1); + if (slot_id && xhci->devs[slot_id]) + xhci_ring_device(xhci, slot_id); + if (bus_state->port_remote_wakeup && (1 << faked_port_index)) { + bus_state->port_remote_wakeup &= + ~(1 << faked_port_index); + xhci_test_and_clear_bit(xhci, port_array, + faked_port_index, PORT_PLC); + usb_wakeup_notification(hcd->self.root_hub, + faked_port_index + 1); + bogus_port_status = true; + goto cleanup; + } + } + if (hcd->speed != HCD_USB3) xhci_test_and_clear_bit(xhci, port_array, faked_port_index, PORT_PLC); cleanup: /* Update event ring dequeue pointer before dropping the lock */ - inc_deq(xhci, xhci->event_ring, true); + inc_deq(xhci, xhci->event_ring); /* Don't make the USB core poll the roothub if we got a bad port status * change event. Besides, at that point we can't tell which roothub @@ -1546,8 +1610,8 @@ static int finish_td(struct xhci_hcd *xhci, struct xhci_td *td, } else { /* Update ring dequeue pointer */ while (ep_ring->dequeue != td->last_trb) - inc_deq(xhci, ep_ring, false); - inc_deq(xhci, ep_ring, false); + inc_deq(xhci, ep_ring); + inc_deq(xhci, ep_ring); } td_cleanup: @@ -1795,8 +1859,8 @@ static int skip_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td, /* Update ring dequeue pointer */ while (ep_ring->dequeue != td->last_trb) - inc_deq(xhci, ep_ring, false); - inc_deq(xhci, ep_ring, false); + inc_deq(xhci, ep_ring); + inc_deq(xhci, ep_ring); return finish_td(xhci, td, NULL, event, ep, status, true); } @@ -2183,7 +2247,7 @@ cleanup: * Will roll back to continue process missed tds. */ if (trb_comp_code == COMP_MISSED_INT || !ep->skip) { - inc_deq(xhci, xhci->event_ring, true); + inc_deq(xhci, xhci->event_ring); } if (ret) { @@ -2277,6 +2341,9 @@ static int xhci_handle_event(struct xhci_hcd *xhci) else update_ptrs = 0; break; + case TRB_TYPE(TRB_DEV_NOTE): + handle_device_notification(xhci, event); + break; default: if ((le32_to_cpu(event->event_cmd.flags) & TRB_TYPE_BITMASK) >= TRB_TYPE(48)) @@ -2295,7 +2362,7 @@ static int xhci_handle_event(struct xhci_hcd *xhci) if (update_ptrs) /* Update SW event ring dequeue pointer */ - inc_deq(xhci, xhci->event_ring, true); + inc_deq(xhci, xhci->event_ring); /* Are there more items on the event ring? Caller will call us again to * check. @@ -2346,7 +2413,7 @@ hw_died: /* FIXME when MSI-X is supported and there are multiple vectors */ /* Clear the MSI-X event interrupt status */ - if (hcd->irq != -1) { + if (hcd->irq) { u32 irq_pending; /* Acknowledge the PCI interrupt */ irq_pending = xhci_readl(xhci, &xhci->ir_set->irq_pending); @@ -2411,7 +2478,7 @@ irqreturn_t xhci_msi_irq(int irq, struct usb_hcd *hcd) * prepare_transfer()? */ static void queue_trb(struct xhci_hcd *xhci, struct xhci_ring *ring, - bool consumer, bool more_trbs_coming, bool isoc, + bool more_trbs_coming, u32 field1, u32 field2, u32 field3, u32 field4) { struct xhci_generic_trb *trb; @@ -2421,7 +2488,7 @@ static void queue_trb(struct xhci_hcd *xhci, struct xhci_ring *ring, trb->field[1] = cpu_to_le32(field2); trb->field[2] = cpu_to_le32(field3); trb->field[3] = cpu_to_le32(field4); - inc_enq(xhci, ring, consumer, more_trbs_coming, isoc); + inc_enq(xhci, ring, more_trbs_coming); } /* @@ -2429,8 +2496,10 @@ static void queue_trb(struct xhci_hcd *xhci, struct xhci_ring *ring, * FIXME allocate segments if the ring is full. */ static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring, - u32 ep_state, unsigned int num_trbs, bool isoc, gfp_t mem_flags) + u32 ep_state, unsigned int num_trbs, gfp_t mem_flags) { + unsigned int num_trbs_needed; + /* Make sure the endpoint has been added to xHC schedule */ switch (ep_state) { case EP_STATE_DISABLED: @@ -2458,11 +2527,25 @@ static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring, */ return -EINVAL; } - if (!room_on_ring(xhci, ep_ring, num_trbs)) { - /* FIXME allocate more room */ - xhci_err(xhci, "ERROR no room on ep ring\n"); - return -ENOMEM; - } + + while (1) { + if (room_on_ring(xhci, ep_ring, num_trbs)) + break; + + if (ep_ring == xhci->cmd_ring) { + xhci_err(xhci, "Do not support expand command ring\n"); + return -ENOMEM; + } + + xhci_dbg(xhci, "ERROR no room on ep ring, " + "try ring expansion\n"); + num_trbs_needed = num_trbs - ep_ring->num_trbs_free; + if (xhci_ring_expansion(xhci, ep_ring, num_trbs_needed, + mem_flags)) { + xhci_err(xhci, "Ring expansion failed\n"); + return -ENOMEM; + } + }; if (enqueue_is_link_trb(ep_ring)) { struct xhci_ring *ring = ep_ring; @@ -2474,8 +2557,9 @@ static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring, /* If we're not dealing with 0.95 hardware or isoc rings * on AMD 0.96 host, clear the chain bit. */ - if (!xhci_link_trb_quirk(xhci) && !(isoc && - (xhci->quirks & XHCI_AMD_0x96_HOST))) + if (!xhci_link_trb_quirk(xhci) && + !(ring->type == TYPE_ISOC && + (xhci->quirks & XHCI_AMD_0x96_HOST))) next->link.control &= cpu_to_le32(~TRB_CHAIN); else next->link.control |= cpu_to_le32(TRB_CHAIN); @@ -2503,7 +2587,6 @@ static int prepare_transfer(struct xhci_hcd *xhci, unsigned int num_trbs, struct urb *urb, unsigned int td_index, - bool isoc, gfp_t mem_flags) { int ret; @@ -2521,7 +2604,7 @@ static int prepare_transfer(struct xhci_hcd *xhci, ret = prepare_ring(xhci, ep_ring, le32_to_cpu(ep_ctx->ep_info) & EP_STATE_MASK, - num_trbs, isoc, mem_flags); + num_trbs, mem_flags); if (ret) return ret; @@ -2731,7 +2814,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags, trb_buff_len = prepare_transfer(xhci, xhci->devs[slot_id], ep_index, urb->stream_id, - num_trbs, urb, 0, false, mem_flags); + num_trbs, urb, 0, mem_flags); if (trb_buff_len < 0) return trb_buff_len; @@ -2819,7 +2902,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags, more_trbs_coming = true; else more_trbs_coming = false; - queue_trb(xhci, ep_ring, false, more_trbs_coming, false, + queue_trb(xhci, ep_ring, more_trbs_coming, lower_32_bits(addr), upper_32_bits(addr), length_field, @@ -2901,7 +2984,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, ret = prepare_transfer(xhci, xhci->devs[slot_id], ep_index, urb->stream_id, - num_trbs, urb, 0, false, mem_flags); + num_trbs, urb, 0, mem_flags); if (ret < 0) return ret; @@ -2973,7 +3056,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, more_trbs_coming = true; else more_trbs_coming = false; - queue_trb(xhci, ep_ring, false, more_trbs_coming, false, + queue_trb(xhci, ep_ring, more_trbs_coming, lower_32_bits(addr), upper_32_bits(addr), length_field, @@ -3030,7 +3113,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, num_trbs++; ret = prepare_transfer(xhci, xhci->devs[slot_id], ep_index, urb->stream_id, - num_trbs, urb, 0, false, mem_flags); + num_trbs, urb, 0, mem_flags); if (ret < 0) return ret; @@ -3063,7 +3146,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, } } - queue_trb(xhci, ep_ring, false, true, false, + queue_trb(xhci, ep_ring, true, setup->bRequestType | setup->bRequest << 8 | le16_to_cpu(setup->wValue) << 16, le16_to_cpu(setup->wIndex) | le16_to_cpu(setup->wLength) << 16, TRB_LEN(8) | TRB_INTR_TARGET(0), @@ -3083,7 +3166,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, if (urb->transfer_buffer_length > 0) { if (setup->bRequestType & USB_DIR_IN) field |= TRB_DIR_IN; - queue_trb(xhci, ep_ring, false, true, false, + queue_trb(xhci, ep_ring, true, lower_32_bits(urb->transfer_dma), upper_32_bits(urb->transfer_dma), length_field, @@ -3099,7 +3182,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, field = 0; else field = TRB_DIR_IN; - queue_trb(xhci, ep_ring, false, false, false, + queue_trb(xhci, ep_ring, false, 0, 0, TRB_INTR_TARGET(0), @@ -3239,8 +3322,7 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, trbs_per_td = count_isoc_trbs_needed(xhci, urb, i); ret = prepare_transfer(xhci, xhci->devs[slot_id], ep_index, - urb->stream_id, trbs_per_td, urb, i, true, - mem_flags); + urb->stream_id, trbs_per_td, urb, i, mem_flags); if (ret < 0) { if (i == 0) return ret; @@ -3310,7 +3392,7 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, remainder | TRB_INTR_TARGET(0); - queue_trb(xhci, ep_ring, false, more_trbs_coming, true, + queue_trb(xhci, ep_ring, more_trbs_coming, lower_32_bits(addr), upper_32_bits(addr), length_field, @@ -3357,6 +3439,7 @@ cleanup: ep_ring->enqueue = urb_priv->td[0]->first_trb; ep_ring->enq_seg = urb_priv->td[0]->start_seg; ep_ring->cycle_state = start_cycle; + ep_ring->num_trbs_free = ep_ring->num_trbs_free_temp; usb_hcd_unlink_urb_from_ep(bus_to_hcd(urb->dev->bus), urb); return ret; } @@ -3393,7 +3476,7 @@ int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags, * Do not insert any td of the urb to the ring if the check failed. */ ret = prepare_ring(xhci, ep_ring, le32_to_cpu(ep_ctx->ep_info) & EP_STATE_MASK, - num_trbs, true, mem_flags); + num_trbs, mem_flags); if (ret) return ret; @@ -3429,6 +3512,8 @@ int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags, urb->dev->speed == USB_SPEED_FULL) urb->interval /= 8; } + ep_ring->num_trbs_free_temp = ep_ring->num_trbs_free; + return xhci_queue_isoc_tx(xhci, GFP_ATOMIC, urb, slot_id, ep_index); } @@ -3452,7 +3537,7 @@ static int queue_command(struct xhci_hcd *xhci, u32 field1, u32 field2, reserved_trbs++; ret = prepare_ring(xhci, xhci->cmd_ring, EP_STATE_RUNNING, - reserved_trbs, false, GFP_ATOMIC); + reserved_trbs, GFP_ATOMIC); if (ret < 0) { xhci_err(xhci, "ERR: No room for command on command ring\n"); if (command_must_succeed) @@ -3460,8 +3545,8 @@ static int queue_command(struct xhci_hcd *xhci, u32 field1, u32 field2, "unfailable commands failed.\n"); return ret; } - queue_trb(xhci, xhci->cmd_ring, false, false, false, field1, field2, - field3, field4 | xhci->cmd_ring->cycle_state); + queue_trb(xhci, xhci->cmd_ring, false, field1, field2, field3, + field4 | xhci->cmd_ring->cycle_state); return 0; } diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index c939f5fdef9..e1963d4a430 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -224,13 +224,13 @@ static void xhci_free_irq(struct xhci_hcd *xhci) int ret; /* return if using legacy interrupt */ - if (xhci_to_hcd(xhci)->irq >= 0) + if (xhci_to_hcd(xhci)->irq > 0) return; ret = xhci_free_msi(xhci); if (!ret) return; - if (pdev->irq >= 0) + if (pdev->irq > 0) free_irq(pdev->irq, xhci_to_hcd(xhci)); return; @@ -341,7 +341,7 @@ static int xhci_try_enable_msi(struct usb_hcd *hcd) /* unregister the legacy interrupt */ if (hcd->irq) free_irq(hcd->irq, hcd); - hcd->irq = -1; + hcd->irq = 0; ret = xhci_setup_msix(xhci); if (ret) @@ -349,7 +349,7 @@ static int xhci_try_enable_msi(struct usb_hcd *hcd) ret = xhci_setup_msi(xhci); if (!ret) - /* hcd->irq is -1, we have MSI */ + /* hcd->irq is 0, we have MSI */ return 0; if (!pdev->irq) { @@ -729,6 +729,7 @@ static void xhci_clear_command_ring(struct xhci_hcd *xhci) ring->enq_seg = ring->deq_seg; ring->enqueue = ring->dequeue; + ring->num_trbs_free = ring->num_segs * (TRBS_PER_SEGMENT - 1) - 1; /* * Ring is now zeroed, so the HW should look for change of ownership * when the cycle bit is set to 1. @@ -3614,26 +3615,38 @@ static int xhci_besl_encoding[16] = {125, 150, 200, 300, 400, 500, 1000, 2000, 3000, 4000, 5000, 6000, 7000, 8000, 9000, 10000}; /* Calculate HIRD/BESL for USB2 PORTPMSC*/ -static int xhci_calculate_hird_besl(int u2del, bool use_besl) +static int xhci_calculate_hird_besl(struct xhci_hcd *xhci, + struct usb_device *udev) { - int hird; + int u2del, besl, besl_host; + int besl_device = 0; + u32 field; + + u2del = HCS_U2_LATENCY(xhci->hcs_params3); + field = le32_to_cpu(udev->bos->ext_cap->bmAttributes); - if (use_besl) { - for (hird = 0; hird < 16; hird++) { - if (xhci_besl_encoding[hird] >= u2del) + if (field & USB_BESL_SUPPORT) { + for (besl_host = 0; besl_host < 16; besl_host++) { + if (xhci_besl_encoding[besl_host] >= u2del) break; } + /* Use baseline BESL value as default */ + if (field & USB_BESL_BASELINE_VALID) + besl_device = USB_GET_BESL_BASELINE(field); + else if (field & USB_BESL_DEEP_VALID) + besl_device = USB_GET_BESL_DEEP(field); } else { if (u2del <= 50) - hird = 0; + besl_host = 0; else - hird = (u2del - 51) / 75 + 1; - - if (hird > 15) - hird = 15; + besl_host = (u2del - 51) / 75 + 1; } - return hird; + besl = besl_host + besl_device; + if (besl > 15) + besl = 15; + + return besl; } static int xhci_usb2_software_lpm_test(struct usb_hcd *hcd, @@ -3646,7 +3659,7 @@ static int xhci_usb2_software_lpm_test(struct usb_hcd *hcd, u32 temp, dev_id; unsigned int port_num; unsigned long flags; - int u2del, hird; + int hird; int ret; if (hcd->speed == HCD_USB3 || !xhci->sw_lpm_support || @@ -3692,12 +3705,7 @@ static int xhci_usb2_software_lpm_test(struct usb_hcd *hcd, * HIRD or BESL shoule be used. See USB2.0 LPM errata. */ pm_addr = port_array[port_num] + 1; - u2del = HCS_U2_LATENCY(xhci->hcs_params3); - if (le32_to_cpu(udev->bos->ext_cap->bmAttributes) & (1 << 2)) - hird = xhci_calculate_hird_besl(u2del, 1); - else - hird = xhci_calculate_hird_besl(u2del, 0); - + hird = xhci_calculate_hird_besl(xhci, udev); temp = PORT_L1DS(udev->slot_id) | PORT_HIRD(hird); xhci_writel(xhci, temp, pm_addr); @@ -3776,7 +3784,7 @@ int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd, u32 temp; unsigned int port_num; unsigned long flags; - int u2del, hird; + int hird; if (hcd->speed == HCD_USB3 || !xhci->hw_lpm_support || !udev->lpm_capable) @@ -3799,11 +3807,7 @@ int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd, xhci_dbg(xhci, "%s port %d USB2 hardware LPM\n", enable ? "enable" : "disable", port_num); - u2del = HCS_U2_LATENCY(xhci->hcs_params3); - if (le32_to_cpu(udev->bos->ext_cap->bmAttributes) & (1 << 2)) - hird = xhci_calculate_hird_besl(u2del, 1); - else - hird = xhci_calculate_hird_besl(u2del, 0); + hird = xhci_calculate_hird_besl(xhci, udev); if (enable) { temp &= ~PORT_HIRD_MASK; @@ -3964,7 +3968,8 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks) int retval; u32 temp; - hcd->self.sg_tablesize = TRBS_PER_SEGMENT - 2; + /* Accept arbitrarily long scatter-gather lists */ + hcd->self.sg_tablesize = ~0; if (usb_hcd_is_primary_hcd(hcd)) { xhci = kzalloc(sizeof(struct xhci_hcd), GFP_KERNEL); @@ -4059,6 +4064,11 @@ static int __init xhci_hcd_init(void) printk(KERN_DEBUG "Problem registering PCI driver."); return retval; } + retval = xhci_register_plat(); + if (retval < 0) { + printk(KERN_DEBUG "Problem registering platform driver."); + goto unreg_pci; + } /* * Check the compiler generated sizes of structures that must be laid * out in specific ways for hardware access. @@ -4078,11 +4088,15 @@ static int __init xhci_hcd_init(void) BUILD_BUG_ON(sizeof(struct xhci_run_regs) != (8+8*128)*32/8); BUILD_BUG_ON(sizeof(struct xhci_doorbell_array) != 256*32/8); return 0; +unreg_pci: + xhci_unregister_pci(); + return retval; } module_init(xhci_hcd_init); static void __exit xhci_hcd_cleanup(void) { xhci_unregister_pci(); + xhci_unregister_plat(); } module_exit(xhci_hcd_cleanup); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index fb99c837914..91074fdab3e 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1223,10 +1223,7 @@ union xhci_trb { /* Allow two commands + a link TRB, along with any reserved command TRBs */ #define MAX_RSVD_CMD_TRBS (TRBS_PER_SEGMENT - 3) #define SEGMENT_SIZE (TRBS_PER_SEGMENT*16) -/* SEGMENT_SHIFT should be log2(SEGMENT_SIZE). - * Change this if you change TRBS_PER_SEGMENT! - */ -#define SEGMENT_SHIFT 10 +#define SEGMENT_SHIFT (__ffs(SEGMENT_SIZE)) /* TRB buffer pointers can't cross 64KB boundaries */ #define TRB_MAX_BUFF_SHIFT 16 #define TRB_MAX_BUFF_SIZE (1 << TRB_MAX_BUFF_SHIFT) @@ -1253,8 +1250,19 @@ struct xhci_dequeue_state { int new_cycle_state; }; +enum xhci_ring_type { + TYPE_CTRL = 0, + TYPE_ISOC, + TYPE_BULK, + TYPE_INTR, + TYPE_STREAM, + TYPE_COMMAND, + TYPE_EVENT, +}; + struct xhci_ring { struct xhci_segment *first_seg; + struct xhci_segment *last_seg; union xhci_trb *enqueue; struct xhci_segment *enq_seg; unsigned int enq_updates; @@ -1269,6 +1277,10 @@ struct xhci_ring { */ u32 cycle_state; unsigned int stream_id; + unsigned int num_segs; + unsigned int num_trbs_free; + unsigned int num_trbs_free_temp; + enum xhci_ring_type type; bool last_td_was_short; }; @@ -1344,6 +1356,7 @@ struct xhci_bus_state { /* ports suspend status arrays - max 31 ports for USB2, 15 for USB3 */ u32 port_c_suspend; u32 suspended_ports; + u32 port_remote_wakeup; unsigned long resume_done[USB_MAXCHILDREN]; }; @@ -1609,6 +1622,8 @@ int xhci_endpoint_init(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev, struct usb_device *udev, struct usb_host_endpoint *ep, gfp_t mem_flags); void xhci_ring_free(struct xhci_hcd *xhci, struct xhci_ring *ring); +int xhci_ring_expansion(struct xhci_hcd *xhci, struct xhci_ring *ring, + unsigned int num_trbs, gfp_t flags); void xhci_free_or_cache_endpoint_ring(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev, unsigned int ep_index); @@ -1648,6 +1663,17 @@ static inline int xhci_register_pci(void) { return 0; } static inline void xhci_unregister_pci(void) {} #endif +#if defined(CONFIG_USB_XHCI_PLATFORM) \ + || defined(CONFIG_USB_XHCI_PLATFORM_MODULE) +int xhci_register_plat(void); +void xhci_unregister_plat(void); +#else +static inline int xhci_register_plat(void) +{ return 0; } +static inline void xhci_unregister_plat(void) +{ } +#endif + /* xHCI host controller glue */ typedef void (*xhci_get_quirks_t)(struct device *, struct xhci_hcd *); void xhci_quiesce(struct xhci_hcd *xhci); |