diff options
Diffstat (limited to 'drivers/usb/host')
-rw-r--r-- | drivers/usb/host/ehci-hcd.c | 26 | ||||
-rw-r--r-- | drivers/usb/host/ehci-ixp4xx.c | 2 | ||||
-rw-r--r-- | drivers/usb/host/ehci-sched.c | 32 | ||||
-rw-r--r-- | drivers/usb/host/ohci-pxa27x.c | 259 |
4 files changed, 236 insertions, 83 deletions
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index d9d53f289ca..8409e0705d6 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -145,16 +145,6 @@ static int handshake (struct ehci_hcd *ehci, void __iomem *ptr, return -ETIMEDOUT; } -static int handshake_on_error_set_halt(struct ehci_hcd *ehci, void __iomem *ptr, - u32 mask, u32 done, int usec) -{ - int error = handshake(ehci, ptr, mask, done, usec); - if (error) - ehci_to_hcd(ehci)->state = HC_STATE_HALT; - - return error; -} - /* force HC to halt state from unknown (EHCI spec section 2.3) */ static int ehci_halt (struct ehci_hcd *ehci) { @@ -173,6 +163,22 @@ static int ehci_halt (struct ehci_hcd *ehci) STS_HALT, STS_HALT, 16 * 125); } +static int handshake_on_error_set_halt(struct ehci_hcd *ehci, void __iomem *ptr, + u32 mask, u32 done, int usec) +{ + int error; + + error = handshake(ehci, ptr, mask, done, usec); + if (error) { + ehci_halt(ehci); + ehci_to_hcd(ehci)->state = HC_STATE_HALT; + ehci_err(ehci, "force halt; handhake %p %08x %08x -> %d\n", + ptr, mask, done, error); + } + + return error; +} + /* put TDI/ARC silicon into EHCI mode */ static void tdi_reset (struct ehci_hcd *ehci) { diff --git a/drivers/usb/host/ehci-ixp4xx.c b/drivers/usb/host/ehci-ixp4xx.c index f9575c40912..9c32063a0c2 100644 --- a/drivers/usb/host/ehci-ixp4xx.c +++ b/drivers/usb/host/ehci-ixp4xx.c @@ -1,7 +1,7 @@ /* * IXP4XX EHCI Host Controller Driver * - * Author: Vladimir Barinov <vbarinov@ru.mvista.com> + * Author: Vladimir Barinov <vbarinov@embeddedalley.com> * * Based on "ehci-fsl.c" by Randy Vinson <rvinson@mvista.com> * diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index b7853c8bac0..4a0c5a78b2e 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -437,6 +437,9 @@ static int enable_periodic (struct ehci_hcd *ehci) u32 cmd; int status; + if (ehci->periodic_sched++) + return 0; + /* did clearing PSE did take effect yet? * takes effect only at frame boundaries... */ @@ -461,6 +464,9 @@ static int disable_periodic (struct ehci_hcd *ehci) u32 cmd; int status; + if (--ehci->periodic_sched) + return 0; + /* did setting PSE not take effect yet? * takes effect only at frame boundaries... */ @@ -544,13 +550,10 @@ static int qh_link_periodic (struct ehci_hcd *ehci, struct ehci_qh *qh) : (qh->usecs * 8); /* maybe enable periodic schedule processing */ - if (!ehci->periodic_sched++) - return enable_periodic (ehci); - - return 0; + return enable_periodic(ehci); } -static void qh_unlink_periodic (struct ehci_hcd *ehci, struct ehci_qh *qh) +static int qh_unlink_periodic(struct ehci_hcd *ehci, struct ehci_qh *qh) { unsigned i; unsigned period; @@ -586,9 +589,7 @@ static void qh_unlink_periodic (struct ehci_hcd *ehci, struct ehci_qh *qh) qh_put (qh); /* maybe turn off periodic schedule */ - ehci->periodic_sched--; - if (!ehci->periodic_sched) - (void) disable_periodic (ehci); + return disable_periodic(ehci); } static void intr_deschedule (struct ehci_hcd *ehci, struct ehci_qh *qh) @@ -1562,9 +1563,7 @@ itd_link_urb ( urb->hcpriv = NULL; timer_action (ehci, TIMER_IO_WATCHDOG); - if (unlikely (!ehci->periodic_sched++)) - return enable_periodic (ehci); - return 0; + return enable_periodic(ehci); } #define ISO_ERRS (EHCI_ISOC_BUF_ERR | EHCI_ISOC_BABBLE | EHCI_ISOC_XACTERR) @@ -1642,7 +1641,7 @@ itd_complete ( ehci_urb_done(ehci, urb, 0); retval = true; urb = NULL; - ehci->periodic_sched--; + (void) disable_periodic(ehci); ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs--; if (unlikely (list_empty (&stream->td_list))) { @@ -1951,9 +1950,7 @@ sitd_link_urb ( urb->hcpriv = NULL; timer_action (ehci, TIMER_IO_WATCHDOG); - if (!ehci->periodic_sched++) - return enable_periodic (ehci); - return 0; + return enable_periodic(ehci); } /*-------------------------------------------------------------------------*/ @@ -2019,7 +2016,7 @@ sitd_complete ( ehci_urb_done(ehci, urb, 0); retval = true; urb = NULL; - ehci->periodic_sched--; + (void) disable_periodic(ehci); ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs--; if (list_empty (&stream->td_list)) { @@ -2243,8 +2240,7 @@ restart: if (unlikely (modified)) { if (likely(ehci->periodic_sched > 0)) goto restart; - /* maybe we can short-circuit this scan! */ - disable_periodic(ehci); + /* short-circuit this scan */ now_uframe = clock; break; } diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index 7f0f35c7818..e294d430733 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -23,17 +23,90 @@ #include <linux/signal.h> #include <linux/platform_device.h> #include <linux/clk.h> - -#include <mach/hardware.h> -#include <mach/pxa-regs.h> -#include <mach/pxa2xx-regs.h> /* FIXME: for PSSR */ #include <mach/ohci.h> +/* + * UHC: USB Host Controller (OHCI-like) register definitions + */ +#define UHCREV (0x0000) /* UHC HCI Spec Revision */ +#define UHCHCON (0x0004) /* UHC Host Control Register */ +#define UHCCOMS (0x0008) /* UHC Command Status Register */ +#define UHCINTS (0x000C) /* UHC Interrupt Status Register */ +#define UHCINTE (0x0010) /* UHC Interrupt Enable */ +#define UHCINTD (0x0014) /* UHC Interrupt Disable */ +#define UHCHCCA (0x0018) /* UHC Host Controller Comm. Area */ +#define UHCPCED (0x001C) /* UHC Period Current Endpt Descr */ +#define UHCCHED (0x0020) /* UHC Control Head Endpt Descr */ +#define UHCCCED (0x0024) /* UHC Control Current Endpt Descr */ +#define UHCBHED (0x0028) /* UHC Bulk Head Endpt Descr */ +#define UHCBCED (0x002C) /* UHC Bulk Current Endpt Descr */ +#define UHCDHEAD (0x0030) /* UHC Done Head */ +#define UHCFMI (0x0034) /* UHC Frame Interval */ +#define UHCFMR (0x0038) /* UHC Frame Remaining */ +#define UHCFMN (0x003C) /* UHC Frame Number */ +#define UHCPERS (0x0040) /* UHC Periodic Start */ +#define UHCLS (0x0044) /* UHC Low Speed Threshold */ + +#define UHCRHDA (0x0048) /* UHC Root Hub Descriptor A */ +#define UHCRHDA_NOCP (1 << 12) /* No over current protection */ +#define UHCRHDA_OCPM (1 << 11) /* Over Current Protection Mode */ +#define UHCRHDA_POTPGT(x) \ + (((x) & 0xff) << 24) /* Power On To Power Good Time */ + +#define UHCRHDB (0x004C) /* UHC Root Hub Descriptor B */ +#define UHCRHS (0x0050) /* UHC Root Hub Status */ +#define UHCRHPS1 (0x0054) /* UHC Root Hub Port 1 Status */ +#define UHCRHPS2 (0x0058) /* UHC Root Hub Port 2 Status */ +#define UHCRHPS3 (0x005C) /* UHC Root Hub Port 3 Status */ + +#define UHCSTAT (0x0060) /* UHC Status Register */ +#define UHCSTAT_UPS3 (1 << 16) /* USB Power Sense Port3 */ +#define UHCSTAT_SBMAI (1 << 15) /* System Bus Master Abort Interrupt*/ +#define UHCSTAT_SBTAI (1 << 14) /* System Bus Target Abort Interrupt*/ +#define UHCSTAT_UPRI (1 << 13) /* USB Port Resume Interrupt */ +#define UHCSTAT_UPS2 (1 << 12) /* USB Power Sense Port 2 */ +#define UHCSTAT_UPS1 (1 << 11) /* USB Power Sense Port 1 */ +#define UHCSTAT_HTA (1 << 10) /* HCI Target Abort */ +#define UHCSTAT_HBA (1 << 8) /* HCI Buffer Active */ +#define UHCSTAT_RWUE (1 << 7) /* HCI Remote Wake Up Event */ + +#define UHCHR (0x0064) /* UHC Reset Register */ +#define UHCHR_SSEP3 (1 << 11) /* Sleep Standby Enable for Port3 */ +#define UHCHR_SSEP2 (1 << 10) /* Sleep Standby Enable for Port2 */ +#define UHCHR_SSEP1 (1 << 9) /* Sleep Standby Enable for Port1 */ +#define UHCHR_PCPL (1 << 7) /* Power control polarity low */ +#define UHCHR_PSPL (1 << 6) /* Power sense polarity low */ +#define UHCHR_SSE (1 << 5) /* Sleep Standby Enable */ +#define UHCHR_UIT (1 << 4) /* USB Interrupt Test */ +#define UHCHR_SSDC (1 << 3) /* Simulation Scale Down Clock */ +#define UHCHR_CGR (1 << 2) /* Clock Generation Reset */ +#define UHCHR_FHR (1 << 1) /* Force Host Controller Reset */ +#define UHCHR_FSBIR (1 << 0) /* Force System Bus Iface Reset */ + +#define UHCHIE (0x0068) /* UHC Interrupt Enable Register*/ +#define UHCHIE_UPS3IE (1 << 14) /* Power Sense Port3 IntEn */ +#define UHCHIE_UPRIE (1 << 13) /* Port Resume IntEn */ +#define UHCHIE_UPS2IE (1 << 12) /* Power Sense Port2 IntEn */ +#define UHCHIE_UPS1IE (1 << 11) /* Power Sense Port1 IntEn */ +#define UHCHIE_TAIE (1 << 10) /* HCI Interface Transfer Abort + Interrupt Enable*/ +#define UHCHIE_HBAIE (1 << 8) /* HCI Buffer Active IntEn */ +#define UHCHIE_RWIE (1 << 7) /* Remote Wake-up IntEn */ + +#define UHCHIT (0x006C) /* UHC Interrupt Test register */ + #define PXA_UHC_MAX_PORTNUM 3 -#define UHCRHPS(x) __REG2( 0x4C000050, (x)<<2 ) +struct pxa27x_ohci { + /* must be 1st member here for hcd_to_ohci() to work */ + struct ohci_hcd ohci; + + struct device *dev; + struct clk *clk; + void __iomem *mmio_base; +}; -static struct clk *usb_clk; +#define to_pxa27x_ohci(hcd) (struct pxa27x_ohci *)hcd_to_ohci(hcd) /* PMM_NPS_MODE -- PMM Non-power switching mode @@ -45,30 +118,35 @@ static struct clk *usb_clk; PMM_PERPORT_MODE -- PMM per port switching mode Ports are powered individually. */ -static int pxa27x_ohci_select_pmm( int mode ) +static int pxa27x_ohci_select_pmm(struct pxa27x_ohci *ohci, int mode) { - switch ( mode ) { + uint32_t uhcrhda = __raw_readl(ohci->mmio_base + UHCRHDA); + uint32_t uhcrhdb = __raw_readl(ohci->mmio_base + UHCRHDB); + + switch (mode) { case PMM_NPS_MODE: - UHCRHDA |= RH_A_NPS; + uhcrhda |= RH_A_NPS; break; case PMM_GLOBAL_MODE: - UHCRHDA &= ~(RH_A_NPS & RH_A_PSM); + uhcrhda &= ~(RH_A_NPS & RH_A_PSM); break; case PMM_PERPORT_MODE: - UHCRHDA &= ~(RH_A_NPS); - UHCRHDA |= RH_A_PSM; + uhcrhda &= ~(RH_A_NPS); + uhcrhda |= RH_A_PSM; /* Set port power control mask bits, only 3 ports. */ - UHCRHDB |= (0x7<<17); + uhcrhdb |= (0x7<<17); break; default: printk( KERN_ERR "Invalid mode %d, set to non-power switch mode.\n", mode ); - UHCRHDA |= RH_A_NPS; + uhcrhda |= RH_A_NPS; } + __raw_writel(uhcrhda, ohci->mmio_base + UHCRHDA); + __raw_writel(uhcrhdb, ohci->mmio_base + UHCRHDB); return 0; } @@ -76,57 +154,110 @@ extern int usb_disabled(void); /*-------------------------------------------------------------------------*/ -static int pxa27x_start_hc(struct device *dev) +static inline void pxa27x_setup_hc(struct pxa27x_ohci *ohci, + struct pxaohci_platform_data *inf) +{ + uint32_t uhchr = __raw_readl(ohci->mmio_base + UHCHR); + uint32_t uhcrhda = __raw_readl(ohci->mmio_base + UHCRHDA); + + if (inf->flags & ENABLE_PORT1) + uhchr &= ~UHCHR_SSEP1; + + if (inf->flags & ENABLE_PORT2) + uhchr &= ~UHCHR_SSEP2; + + if (inf->flags & ENABLE_PORT3) + uhchr &= ~UHCHR_SSEP3; + + if (inf->flags & POWER_CONTROL_LOW) + uhchr |= UHCHR_PCPL; + + if (inf->flags & POWER_SENSE_LOW) + uhchr |= UHCHR_PSPL; + + if (inf->flags & NO_OC_PROTECTION) + uhcrhda |= UHCRHDA_NOCP; + + if (inf->flags & OC_MODE_PERPORT) + uhcrhda |= UHCRHDA_OCPM; + + if (inf->power_on_delay) { + uhcrhda &= ~UHCRHDA_POTPGT(0xff); + uhcrhda |= UHCRHDA_POTPGT(inf->power_on_delay / 2); + } + + __raw_writel(uhchr, ohci->mmio_base + UHCHR); + __raw_writel(uhcrhda, ohci->mmio_base + UHCRHDA); +} + +static inline void pxa27x_reset_hc(struct pxa27x_ohci *ohci) +{ + uint32_t uhchr = __raw_readl(ohci->mmio_base + UHCHR); + + __raw_writel(uhchr | UHCHR_FHR, ohci->mmio_base + UHCHR); + udelay(11); + __raw_writel(uhchr & ~UHCHR_FHR, ohci->mmio_base + UHCHR); +} + +#ifdef CONFIG_CPU_PXA27x +extern void pxa27x_clear_otgph(void); +#else +#define pxa27x_clear_otgph() do {} while (0) +#endif + +static int pxa27x_start_hc(struct pxa27x_ohci *ohci, struct device *dev) { int retval = 0; struct pxaohci_platform_data *inf; + uint32_t uhchr; inf = dev->platform_data; - clk_enable(usb_clk); + clk_enable(ohci->clk); - UHCHR |= UHCHR_FHR; - udelay(11); - UHCHR &= ~UHCHR_FHR; + pxa27x_reset_hc(ohci); + + uhchr = __raw_readl(ohci->mmio_base + UHCHR) | UHCHR_FSBIR; + __raw_writel(uhchr, ohci->mmio_base + UHCHR); - UHCHR |= UHCHR_FSBIR; - while (UHCHR & UHCHR_FSBIR) + while (__raw_readl(ohci->mmio_base + UHCHR) & UHCHR_FSBIR) cpu_relax(); + pxa27x_setup_hc(ohci, inf); + if (inf->init) retval = inf->init(dev); if (retval < 0) return retval; - UHCHR &= ~UHCHR_SSE; - - UHCHIE = (UHCHIE_UPRIE | UHCHIE_RWIE); + uhchr = __raw_readl(ohci->mmio_base + UHCHR) & ~UHCHR_SSE; + __raw_writel(uhchr, ohci->mmio_base + UHCHR); + __raw_writel(UHCHIE_UPRIE | UHCHIE_RWIE, ohci->mmio_base + UHCHIE); /* Clear any OTG Pin Hold */ - if (cpu_is_pxa27x() && (PSSR & PSSR_OTGPH)) - PSSR |= PSSR_OTGPH; - + pxa27x_clear_otgph(); return 0; } -static void pxa27x_stop_hc(struct device *dev) +static void pxa27x_stop_hc(struct pxa27x_ohci *ohci, struct device *dev) { struct pxaohci_platform_data *inf; + uint32_t uhccoms; inf = dev->platform_data; if (inf->exit) inf->exit(dev); - UHCHR |= UHCHR_FHR; - udelay(11); - UHCHR &= ~UHCHR_FHR; + pxa27x_reset_hc(ohci); - UHCCOMS |= 1; + /* Host Controller Reset */ + uhccoms = __raw_readl(ohci->mmio_base + UHCCOMS) | 0x01; + __raw_writel(uhccoms, ohci->mmio_base + UHCCOMS); udelay(10); - clk_disable(usb_clk); + clk_disable(ohci->clk); } @@ -147,18 +278,22 @@ static void pxa27x_stop_hc(struct device *dev) */ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device *pdev) { - int retval; + int retval, irq; struct usb_hcd *hcd; struct pxaohci_platform_data *inf; + struct pxa27x_ohci *ohci; + struct resource *r; + struct clk *usb_clk; inf = pdev->dev.platform_data; if (!inf) return -ENODEV; - if (pdev->resource[1].flags != IORESOURCE_IRQ) { - pr_debug ("resource[1] is not IORESOURCE_IRQ"); - return -ENOMEM; + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + pr_err("no resource of IORESOURCE_IRQ"); + return -ENXIO; } usb_clk = clk_get(&pdev->dev, "USBCLK"); @@ -168,8 +303,16 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device hcd = usb_create_hcd (driver, &pdev->dev, "pxa27x"); if (!hcd) return -ENOMEM; - hcd->rsrc_start = pdev->resource[0].start; - hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1; + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!r) { + pr_err("no resource of IORESOURCE_MEM"); + retval = -ENXIO; + goto err1; + } + + hcd->rsrc_start = r->start; + hcd->rsrc_len = resource_size(r); if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { pr_debug("request_mem_region failed"); @@ -184,24 +327,30 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device goto err2; } - if ((retval = pxa27x_start_hc(&pdev->dev)) < 0) { + /* initialize "struct pxa27x_ohci" */ + ohci = (struct pxa27x_ohci *)hcd_to_ohci(hcd); + ohci->dev = &pdev->dev; + ohci->clk = usb_clk; + ohci->mmio_base = (void __iomem *)hcd->regs; + + if ((retval = pxa27x_start_hc(ohci, &pdev->dev)) < 0) { pr_debug("pxa27x_start_hc failed"); goto err3; } /* Select Power Management Mode */ - pxa27x_ohci_select_pmm(inf->port_mode); + pxa27x_ohci_select_pmm(ohci, inf->port_mode); if (inf->power_budget) hcd->power_budget = inf->power_budget; ohci_hcd_init(hcd_to_ohci(hcd)); - retval = usb_add_hcd(hcd, pdev->resource[1].start, IRQF_DISABLED); + retval = usb_add_hcd(hcd, irq, IRQF_DISABLED); if (retval == 0) return retval; - pxa27x_stop_hc(&pdev->dev); + pxa27x_stop_hc(ohci, &pdev->dev); err3: iounmap(hcd->regs); err2: @@ -228,12 +377,14 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device */ void usb_hcd_pxa27x_remove (struct usb_hcd *hcd, struct platform_device *pdev) { + struct pxa27x_ohci *ohci = to_pxa27x_ohci(hcd); + usb_remove_hcd(hcd); - pxa27x_stop_hc(&pdev->dev); + pxa27x_stop_hc(ohci, &pdev->dev); iounmap(hcd->regs); release_mem_region(hcd->rsrc_start, hcd->rsrc_len); usb_put_hcd(hcd); - clk_put(usb_clk); + clk_put(ohci->clk); } /*-------------------------------------------------------------------------*/ @@ -266,7 +417,7 @@ ohci_pxa27x_start (struct usb_hcd *hcd) static const struct hc_driver ohci_pxa27x_hc_driver = { .description = hcd_name, .product_desc = "PXA27x OHCI", - .hcd_priv_size = sizeof(struct ohci_hcd), + .hcd_priv_size = sizeof(struct pxa27x_ohci), /* * generic hardware linkage @@ -330,13 +481,13 @@ static int ohci_hcd_pxa27x_drv_remove(struct platform_device *pdev) static int ohci_hcd_pxa27x_drv_suspend(struct platform_device *pdev, pm_message_t state) { struct usb_hcd *hcd = platform_get_drvdata(pdev); - struct ohci_hcd *ohci = hcd_to_ohci(hcd); + struct pxa27x_ohci *ohci = to_pxa27x_ohci(hcd); - if (time_before(jiffies, ohci->next_statechange)) + if (time_before(jiffies, ohci->ohci.next_statechange)) msleep(5); - ohci->next_statechange = jiffies; + ohci->ohci.next_statechange = jiffies; - pxa27x_stop_hc(&pdev->dev); + pxa27x_stop_hc(ohci, &pdev->dev); hcd->state = HC_STATE_SUSPENDED; return 0; @@ -345,14 +496,14 @@ static int ohci_hcd_pxa27x_drv_suspend(struct platform_device *pdev, pm_message_ static int ohci_hcd_pxa27x_drv_resume(struct platform_device *pdev) { struct usb_hcd *hcd = platform_get_drvdata(pdev); - struct ohci_hcd *ohci = hcd_to_ohci(hcd); + struct pxa27x_ohci *ohci = to_pxa27x_ohci(hcd); int status; - if (time_before(jiffies, ohci->next_statechange)) + if (time_before(jiffies, ohci->ohci.next_statechange)) msleep(5); - ohci->next_statechange = jiffies; + ohci->ohci.next_statechange = jiffies; - if ((status = pxa27x_start_hc(&pdev->dev)) < 0) + if ((status = pxa27x_start_hc(ohci, &pdev->dev)) < 0) return status; ohci_finish_controller_resume(hcd); |