diff options
Diffstat (limited to 'drivers/usb/host/uhci-hcd.h')
| -rw-r--r-- | drivers/usb/host/uhci-hcd.h | 59 |
1 files changed, 37 insertions, 22 deletions
diff --git a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h index 02255d69e1f..bf9c5f9b508 100644 --- a/drivers/usb/host/uhci-hcd.h +++ b/drivers/usb/host/uhci-hcd.h @@ -41,6 +41,7 @@ #define USBFRNUM 6 #define USBFLBASEADD 8 #define USBSOF 12 +#define USBSOF_DEFAULT 64 /* Frame length is exactly 1 ms */ /* USB port status and control registers */ #define USBPORTSC1 16 @@ -66,6 +67,8 @@ /* Legacy support register */ #define USBLEGSUP 0xc0 #define USBLEGSUP_DEFAULT 0x2000 /* only PIRQ enable set */ +#define USBLEGSUP_RWC 0x8f00 /* the R/WC bits */ +#define USBLEGSUP_RO 0x5040 /* R/O and reserved bits */ #define UHCI_NULL_DATA_SIZE 0x7FF /* for UHCI controller TD */ @@ -111,7 +114,6 @@ struct uhci_qh { /* Software fields */ dma_addr_t dma_handle; - struct usb_device *dev; struct urb_priv *urbp; struct list_head list; /* P: uhci->frame_list_lock */ @@ -203,7 +205,6 @@ struct uhci_td { /* Software fields */ dma_addr_t dma_handle; - struct usb_device *dev; struct urb *urb; struct list_head list; /* P: urb->lock */ @@ -314,26 +315,32 @@ static inline int __interval_to_skel(int interval) } /* - * Device states for the host controller. + * States for the root hub. * * To prevent "bouncing" in the presence of electrical noise, - * we insist on a 1-second "grace" period, before switching to - * the RUNNING or SUSPENDED states, during which the state is - * not allowed to change. - * - * The resume process is divided into substates in order to avoid - * potentially length delays during the timer handler. - * - * States in which the host controller is halted must have values <= 0. + * when there are no devices attached we delay for 1 second in the + * RUNNING_NODEVS state before switching to the AUTO_STOPPED state. + * + * (Note that the AUTO_STOPPED state won't be necessary once the hub + * driver learns to autosuspend.) */ -enum uhci_state { - UHCI_RESET, - UHCI_RUNNING_GRACE, /* Before RUNNING */ - UHCI_RUNNING, /* The normal state */ - UHCI_SUSPENDING_GRACE, /* Before SUSPENDED */ - UHCI_SUSPENDED = -10, /* When no devices are attached */ - UHCI_RESUMING_1, - UHCI_RESUMING_2 +enum uhci_rh_state { + /* In the following states the HC must be halted. + * These two must come first */ + UHCI_RH_RESET, + UHCI_RH_SUSPENDED, + + UHCI_RH_AUTO_STOPPED, + UHCI_RH_RESUMING, + + /* In this state the HC changes from running to halted, + * so it can legally appear either way. */ + UHCI_RH_SUSPENDING, + + /* In the following states it's an error if the HC is halted. + * These two must come last */ + UHCI_RH_RUNNING, /* The normal state */ + UHCI_RH_RUNNING_NODEVS, /* Running with no devices attached */ }; /* @@ -363,15 +370,16 @@ struct uhci_hcd { int fsbr; /* Full-speed bandwidth reclamation */ unsigned long fsbrtimeout; /* FSBR delay */ - enum uhci_state state; /* FIXME: needs a spinlock */ - unsigned long state_end; /* Time of next transition */ + enum uhci_rh_state rh_state; + unsigned long auto_stop_time; /* When to AUTO_STOP */ + unsigned int frame_number; /* As of last check */ unsigned int is_stopped; #define UHCI_IS_STOPPED 9999 /* Larger than a frame # */ unsigned int scan_in_progress:1; /* Schedule scan is running */ unsigned int need_rescan:1; /* Redo the schedule scan */ - unsigned int resume_detect:1; /* Need a Global Resume */ + unsigned int hc_inaccessible:1; /* HC is suspended or dead */ /* Support for port suspend/resume/reset */ unsigned long port_c_suspend; /* Bit-arrays of ports */ @@ -451,4 +459,11 @@ struct urb_priv { * #2 urb->lock */ + +/* Some special IDs */ + +#define PCI_VENDOR_ID_GENESYS 0x17a0 +#define PCI_DEVICE_ID_GL880S_UHCI 0x8083 +#define PCI_DEVICE_ID_GL880S_EHCI 0x8084 + #endif |