aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/host/ehci-pci.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host/ehci-pci.c')
-rw-r--r--drivers/usb/host/ehci-pci.c39
1 files changed, 39 insertions, 0 deletions
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 655f3c9f88b..76179c39c0e 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -22,6 +22,9 @@
#error "This file is PCI bus glue. CONFIG_PCI must be defined."
#endif
+/* defined here to avoid adding to pci_ids.h for single instance use */
+#define PCI_DEVICE_ID_INTEL_CE4100_USB 0x2e70
+
/*-------------------------------------------------------------------------*/
/* called after powerup, by probe or system-pm "wakeup" */
@@ -41,6 +44,35 @@ static int ehci_pci_reinit(struct ehci_hcd *ehci, struct pci_dev *pdev)
return 0;
}
+static int ehci_quirk_amd_SB800(struct ehci_hcd *ehci)
+{
+ struct pci_dev *amd_smbus_dev;
+ u8 rev = 0;
+
+ amd_smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI, 0x4385, NULL);
+ if (!amd_smbus_dev)
+ return 0;
+
+ pci_read_config_byte(amd_smbus_dev, PCI_REVISION_ID, &rev);
+ if (rev < 0x40) {
+ pci_dev_put(amd_smbus_dev);
+ amd_smbus_dev = NULL;
+ return 0;
+ }
+
+ if (!amd_nb_dev)
+ amd_nb_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x1510, NULL);
+ if (!amd_nb_dev)
+ ehci_err(ehci, "QUIRK: unable to get AMD NB device\n");
+
+ ehci_info(ehci, "QUIRK: Enable AMD SB800 L1 fix\n");
+
+ pci_dev_put(amd_smbus_dev);
+ amd_smbus_dev = NULL;
+
+ return 1;
+}
+
/* called during probe() after chip reset completes */
static int ehci_pci_setup(struct usb_hcd *hcd)
{
@@ -99,6 +131,9 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
/* cache this readonly data; minimize chip reads */
ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
+ if (ehci_quirk_amd_SB800(ehci))
+ ehci->amd_l1_fix = 1;
+
retval = ehci_halt(ehci);
if (retval)
return retval;
@@ -137,6 +172,10 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
ehci_info(ehci, "disable lpm for langwell/penwell\n");
ehci->has_lpm = 0;
}
+ if (pdev->device == PCI_DEVICE_ID_INTEL_CE4100_USB) {
+ hcd->has_tt = 1;
+ tdi_reset(ehci);
+ }
break;
case PCI_VENDOR_ID_TDI:
if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) {