aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/host/ehci-omap.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host/ehci-omap.c')
-rw-r--r--drivers/usb/host/ehci-omap.c104
1 files changed, 51 insertions, 53 deletions
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index 6e15fc87cf6..6133d93808d 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -145,6 +145,56 @@ static void omap_ehci_soft_phy_reset(struct platform_device *pdev, u8 port)
}
}
+static int omap_ehci_init(struct usb_hcd *hcd)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ int rc;
+ struct ehci_hcd_omap_platform_data *pdata;
+
+ pdata = hcd->self.controller->platform_data;
+ if (pdata->phy_reset) {
+ if (gpio_is_valid(pdata->reset_gpio_port[0]))
+ gpio_request_one(pdata->reset_gpio_port[0],
+ GPIOF_OUT_INIT_LOW, "USB1 PHY reset");
+
+ if (gpio_is_valid(pdata->reset_gpio_port[1]))
+ gpio_request_one(pdata->reset_gpio_port[1],
+ GPIOF_OUT_INIT_LOW, "USB2 PHY reset");
+
+ /* Hold the PHY in RESET for enough time till DIR is high */
+ udelay(10);
+ }
+
+ /* Soft reset the PHY using PHY reset command over ULPI */
+ if (pdata->port_mode[0] == OMAP_EHCI_PORT_MODE_PHY)
+ omap_ehci_soft_phy_reset(pdev, 0);
+ if (pdata->port_mode[1] == OMAP_EHCI_PORT_MODE_PHY)
+ omap_ehci_soft_phy_reset(pdev, 1);
+
+ /* we know this is the memory we want, no need to ioremap again */
+ ehci->caps = hcd->regs;
+
+ rc = ehci_setup(hcd);
+
+ if (pdata->phy_reset) {
+ /* Hold the PHY in RESET for enough time till
+ * PHY is settled and ready
+ */
+ udelay(10);
+
+ if (gpio_is_valid(pdata->reset_gpio_port[0]))
+ gpio_set_value_cansleep(pdata->reset_gpio_port[0], 1);
+
+ if (gpio_is_valid(pdata->reset_gpio_port[1]))
+ gpio_set_value_cansleep(pdata->reset_gpio_port[1], 1);
+ }
+
+ /* root ports should always stay powered */
+ ehci_port_power(ehci, 1);
+
+ return rc;
+}
+
static int omap_ehci_hub_control(
struct usb_hcd *hcd,
u16 typeReq,
@@ -219,7 +269,6 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
struct resource *res;
struct usb_hcd *hcd;
void __iomem *regs;
- struct ehci_hcd *omap_ehci;
int ret = -ENODEV;
int irq;
int i;
@@ -281,19 +330,6 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
}
}
- if (pdata->phy_reset) {
- if (gpio_is_valid(pdata->reset_gpio_port[0]))
- gpio_request_one(pdata->reset_gpio_port[0],
- GPIOF_OUT_INIT_LOW, "USB1 PHY reset");
-
- if (gpio_is_valid(pdata->reset_gpio_port[1]))
- gpio_request_one(pdata->reset_gpio_port[1],
- GPIOF_OUT_INIT_LOW, "USB2 PHY reset");
-
- /* Hold the PHY in RESET for enough time till DIR is high */
- udelay(10);
- }
-
pm_runtime_enable(dev);
pm_runtime_get_sync(dev);
@@ -309,50 +345,12 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
ehci_write(regs, EHCI_INSNREG04,
EHCI_INSNREG04_DISABLE_UNSUSPEND);
- /* Soft reset the PHY using PHY reset command over ULPI */
- if (pdata->port_mode[0] == OMAP_EHCI_PORT_MODE_PHY)
- omap_ehci_soft_phy_reset(pdev, 0);
- if (pdata->port_mode[1] == OMAP_EHCI_PORT_MODE_PHY)
- omap_ehci_soft_phy_reset(pdev, 1);
-
- omap_ehci = hcd_to_ehci(hcd);
- omap_ehci->sbrn = 0x20;
-
- /* we know this is the memory we want, no need to ioremap again */
- omap_ehci->caps = hcd->regs;
- omap_ehci->regs = hcd->regs
- + HC_LENGTH(ehci, readl(&omap_ehci->caps->hc_capbase));
-
- dbg_hcs_params(omap_ehci, "reset");
- dbg_hcc_params(omap_ehci, "reset");
-
- /* cache this readonly data; minimize chip reads */
- omap_ehci->hcs_params = readl(&omap_ehci->caps->hcs_params);
-
- ehci_reset(omap_ehci);
-
- if (pdata->phy_reset) {
- /* Hold the PHY in RESET for enough time till
- * PHY is settled and ready
- */
- udelay(10);
-
- if (gpio_is_valid(pdata->reset_gpio_port[0]))
- gpio_set_value_cansleep(pdata->reset_gpio_port[0], 1);
-
- if (gpio_is_valid(pdata->reset_gpio_port[1]))
- gpio_set_value_cansleep(pdata->reset_gpio_port[1], 1);
- }
-
ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
if (ret) {
dev_err(dev, "failed to add hcd with err %d\n", ret);
goto err_pm_runtime;
}
- /* root ports should always stay powered */
- ehci_port_power(omap_ehci, 1);
-
/* get clocks */
utmi_p1_fck = clk_get(dev, "utmi_p1_gfclk");
if (IS_ERR(utmi_p1_fck)) {
@@ -512,7 +510,7 @@ static const struct hc_driver ehci_omap_hc_driver = {
/*
* basic lifecycle operations
*/
- .reset = ehci_init,
+ .reset = omap_ehci_init,
.start = ehci_run,
.stop = ehci_stop,
.shutdown = ehci_shutdown,