diff options
Diffstat (limited to 'drivers/usb/host/Kconfig')
| -rw-r--r-- | drivers/usb/host/Kconfig | 217 |
1 files changed, 122 insertions, 95 deletions
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index c59a1126926..de94f269906 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -2,11 +2,9 @@ # USB Host Controller Drivers # comment "USB Host Controller Drivers" - depends on USB config USB_C67X00_HCD tristate "Cypress C67x00 HCD support" - depends on USB help The Cypress C67x00 (EZ-Host/EZ-OTG) chips are dual-role host/peripheral/OTG USB controllers. @@ -19,7 +17,7 @@ config USB_C67X00_HCD config USB_XHCI_HCD tristate "xHCI HCD (USB 3.0) support" - depends on USB && USB_ARCH_HAS_XHCI + depends on USB_ARCH_HAS_XHCI ---help--- The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0 "SuperSpeed" host controller hardware. @@ -27,13 +25,13 @@ config USB_XHCI_HCD To compile this driver as a module, choose M here: the module will be called xhci-hcd. +if USB_XHCI_HCD + config USB_XHCI_PLATFORM tristate - depends on USB_XHCI_HCD config USB_XHCI_HCD_DEBUGGING bool "Debugging for the xHCI host controller" - depends on USB_XHCI_HCD ---help--- Say 'Y' to turn on debugging for the xHCI host controller driver. This will spew debugging output, even in interrupt context. @@ -41,9 +39,11 @@ config USB_XHCI_HCD_DEBUGGING If unsure, say N. +endif # USB_XHCI_HCD + config USB_EHCI_HCD tristate "EHCI HCD (USB 2.0) support" - depends on USB && USB_ARCH_HAS_EHCI + depends on USB_ARCH_HAS_EHCI ---help--- The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0 "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware. @@ -95,14 +95,19 @@ config USB_EHCI_TT_NEWSCHED If unsure, say Y. +config USB_FSL_MPH_DR_OF + tristate + +if USB_EHCI_HCD + config USB_EHCI_PCI tristate - depends on USB_EHCI_HCD && PCI + depends on PCI default y config USB_EHCI_HCD_PMC_MSP tristate "EHCI support for on-chip PMC MSP71xx USB controller" - depends on USB_EHCI_HCD && MSP_HAS_USB + depends on MSP_HAS_USB default n select USB_EHCI_BIG_ENDIAN_DESC select USB_EHCI_BIG_ENDIAN_MMIO @@ -112,22 +117,13 @@ config USB_EHCI_HCD_PMC_MSP config USB_EHCI_BIG_ENDIAN_MMIO bool - depends on USB_EHCI_HCD && (PPC_CELLEB || PPC_PS3 || 440EPX || \ - ARCH_IXP4XX || XPS_USB_HCD_XILINX || \ - PPC_MPC512x || CPU_CAVIUM_OCTEON || \ - PMC_MSP || SPARC_LEON || MIPS_SEAD3) - default y config USB_EHCI_BIG_ENDIAN_DESC bool - depends on USB_EHCI_HCD && (440EPX || ARCH_IXP4XX || XPS_USB_HCD_XILINX || \ - PPC_MPC512x || PMC_MSP || SPARC_LEON || \ - MIPS_SEAD3) - default y config XPS_USB_HCD_XILINX bool "Use Xilinx usb host EHCI controller core" - depends on USB_EHCI_HCD && (PPC32 || MICROBLAZE) + depends on (PPC32 || MICROBLAZE) select USB_EHCI_BIG_ENDIAN_DESC select USB_EHCI_BIG_ENDIAN_MMIO ---help--- @@ -136,12 +132,9 @@ config XPS_USB_HCD_XILINX support both high speed and full speed devices, or high speed devices only. -config USB_FSL_MPH_DR_OF - tristate - config USB_EHCI_FSL bool "Support for Freescale PPC on-chip EHCI USB controller" - depends on USB_EHCI_HCD && FSL_SOC + depends on FSL_SOC select USB_EHCI_ROOT_HUB_TT select USB_FSL_MPH_DR_OF if OF ---help--- @@ -149,22 +142,53 @@ config USB_EHCI_FSL config USB_EHCI_MXC tristate "Support for Freescale i.MX on-chip EHCI USB controller" - depends on USB_EHCI_HCD && ARCH_MXC + depends on ARCH_MXC select USB_EHCI_ROOT_HUB_TT ---help--- Variation of ARC USB block used in some Freescale chips. config USB_EHCI_HCD_OMAP - bool "EHCI support for OMAP3 and later chips" - depends on USB_EHCI_HCD && ARCH_OMAP + tristate "EHCI support for OMAP3 and later chips" + depends on ARCH_OMAP default y ---help--- Enables support for the on-chip EHCI controller on OMAP3 and later chips. + If your system uses a PHY on the USB port, you will need to + enable USB_PHY and the appropriate PHY driver as well. Most + boards need the NOP_USB_XCEIV PHY driver. + +config USB_EHCI_HCD_ORION + tristate "Support for Marvell EBU on-chip EHCI USB controller" + depends on USB_EHCI_HCD && PLAT_ORION + default y + ---help--- + Enables support for the on-chip EHCI controller on Marvell's + embedded ARM SoCs, including Orion, Kirkwood, Dove, Armada XP, + Armada 370. This is different from the EHCI implementation + on Marvell's mobile PXA and MMP SoC, see "EHCI support for + Marvell PXA/MMP USB controller" for those. + +config USB_EHCI_HCD_SPEAR + tristate "Support for ST SPEAr on-chip EHCI USB controller" + depends on USB_EHCI_HCD && PLAT_SPEAR + default y + ---help--- + Enables support for the on-chip EHCI controller on + ST SPEAr chips. + +config USB_EHCI_HCD_AT91 + tristate "Support for Atmel on-chip EHCI USB controller" + depends on USB_EHCI_HCD && ARCH_AT91 + default y + ---help--- + Enables support for the on-chip EHCI controller on + Atmel chips. config USB_EHCI_MSM - bool "Support for MSM on-chip EHCI USB controller" - depends on USB_EHCI_HCD && ARCH_MSM + tristate "Support for Qualcomm QSD/MSM on-chip EHCI USB controller" + depends on ARCH_MSM + depends on USB_PHY select USB_EHCI_ROOT_HUB_TT select USB_MSM_OTG ---help--- @@ -177,15 +201,16 @@ config USB_EHCI_MSM config USB_EHCI_TEGRA boolean "NVIDIA Tegra HCD support" - depends on USB_EHCI_HCD && ARCH_TEGRA + depends on ARCH_TEGRA select USB_EHCI_ROOT_HUB_TT + select USB_PHY help This driver enables support for the internal USB Host Controllers found in NVIDIA Tegra SoCs. The controllers are EHCI compliant. config USB_EHCI_HCD_PPC_OF bool "EHCI support for PPC USB controller on OF platform bus" - depends on USB_EHCI_HCD && PPC_OF + depends on PPC_OF default y ---help--- Enables support for the USB controller present on the PowerPC @@ -193,35 +218,40 @@ config USB_EHCI_HCD_PPC_OF config USB_EHCI_SH bool "EHCI support for SuperH USB controller" - depends on USB_EHCI_HCD && SUPERH + depends on SUPERH ---help--- Enables support for the on-chip EHCI controller on the SuperH. If you use the PCI EHCI controller, this option is not necessary. config USB_EHCI_S5P - boolean "S5P EHCI support" - depends on USB_EHCI_HCD && PLAT_S5P + tristate "EHCI support for Samsung S5P/EXYNOS SoC Series" + depends on PLAT_S5P help - Enable support for the S5P SOC's on-chip EHCI controller. + Enable support for the Samsung S5Pxxxx and Exynos3/4/5 SOC's + on-chip EHCI controller. config USB_EHCI_MV - bool "EHCI support for Marvell on-chip controller" - depends on USB_EHCI_HCD && (ARCH_PXA || ARCH_MMP) + bool "EHCI support for Marvell PXA/MMP USB controller" + depends on (ARCH_PXA || ARCH_MMP) select USB_EHCI_ROOT_HUB_TT ---help--- Enables support for Marvell (including PXA and MMP series) on-chip USB SPH and OTG controller. SPH is a single port host, and it can only be EHCI host. OTG is controller that can switch to host mode. + Note that this driver will not work on Marvell's other EHCI + controller used by the EBU-type SoCs including Orion, Kirkwood, + Dova, Armada 370 and Armada XP. See "Support for Marvell EBU + on-chip EHCI USB controller" for those. config USB_W90X900_EHCI bool "W90X900(W90P910) EHCI support" - depends on USB_EHCI_HCD && ARCH_W90X900 + depends on ARCH_W90X900 ---help--- Enables support for the W90X900 USB controller config USB_CNS3XXX_EHCI bool "Cavium CNS3XXX EHCI Module (DEPRECATED)" - depends on USB_EHCI_HCD && ARCH_CNS3XXX + depends on ARCH_CNS3XXX select USB_EHCI_HCD_PLATFORM ---help--- This option is deprecated now and the driver was removed, use @@ -233,7 +263,7 @@ config USB_CNS3XXX_EHCI config USB_EHCI_ATH79 bool "EHCI support for AR7XXX/AR9XXX SoCs (DEPRECATED)" - depends on USB_EHCI_HCD && (SOC_AR71XX || SOC_AR724X || SOC_AR913X || SOC_AR933X) + depends on (SOC_AR71XX || SOC_AR724X || SOC_AR913X || SOC_AR933X) select USB_EHCI_ROOT_HUB_TT select USB_EHCI_HCD_PLATFORM default y @@ -244,9 +274,31 @@ config USB_EHCI_ATH79 Enables support for the built-in EHCI controller present on the Atheros AR7XXX/AR9XXX SoCs. +config USB_EHCI_HCD_PLATFORM + tristate "Generic EHCI driver for a platform device" + default n + ---help--- + Adds an EHCI host driver for a generic platform device, which + provides a memory space and an irq. + + If unsure, say N. + +config USB_OCTEON_EHCI + bool "Octeon on-chip EHCI support" + depends on CPU_CAVIUM_OCTEON + default n + select USB_EHCI_BIG_ENDIAN_MMIO + help + Enable support for the Octeon II SOC's on-chip EHCI + controller. It is needed for high-speed (480Mbit/sec) + USB 2.0 device support. All CN6XXX based chips with USB are + supported. + +endif # USB_EHCI_HCD + config USB_OXU210HP_HCD tristate "OXU210HP HCD support" - depends on USB && GENERIC_HARDIRQS + depends on GENERIC_HARDIRQS ---help--- The OXU210HP is an USB host/OTG/device controller. Enable this option if your board has this chip. If unsure, say N. @@ -259,7 +311,6 @@ config USB_OXU210HP_HCD config USB_ISP116X_HCD tristate "ISP116X HCD support" - depends on USB ---help--- The ISP1160 and ISP1161 chips are USB host controllers. Enable this option if your board has this chip. If unsure, say N. @@ -271,7 +322,6 @@ config USB_ISP116X_HCD config USB_ISP1760_HCD tristate "ISP 1760 HCD support" - depends on USB ---help--- The ISP1760 chip is a USB 2.0 host controller. @@ -286,7 +336,6 @@ config USB_ISP1760_HCD config USB_ISP1362_HCD tristate "ISP1362 HCD support" - depends on USB default N ---help--- Supports the Philips ISP1362 chip as a host controller @@ -298,9 +347,8 @@ config USB_ISP1362_HCD config USB_OHCI_HCD tristate "OHCI HCD support" - depends on USB && USB_ARCH_HAS_OHCI + depends on USB_ARCH_HAS_OHCI select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 - select USB_OTG_UTILS if ARCH_OMAP depends on USB_ISP1301 || !ARCH_LPC32XX ---help--- The Open Host Controller Interface (OHCI) is a standard for accessing @@ -315,16 +363,18 @@ config USB_OHCI_HCD To compile this driver as a module, choose M here: the module will be called ohci-hcd. +if USB_OHCI_HCD + config USB_OHCI_HCD_OMAP1 bool "OHCI support for OMAP1/2 chips" - depends on USB_OHCI_HCD && ARCH_OMAP1 + depends on ARCH_OMAP1 default y ---help--- Enables support for the OHCI controller on OMAP1/2 chips. config USB_OHCI_HCD_OMAP3 bool "OHCI support for OMAP3 and later chips" - depends on USB_OHCI_HCD && (ARCH_OMAP3 || ARCH_OMAP4) + depends on (ARCH_OMAP3 || ARCH_OMAP4) default y ---help--- Enables support for the on-chip OHCI controller on @@ -332,7 +382,7 @@ config USB_OHCI_HCD_OMAP3 config USB_OHCI_ATH79 bool "USB OHCI support for the Atheros AR71XX/AR7240 SoCs (DEPRECATED)" - depends on USB_OHCI_HCD && (SOC_AR71XX || SOC_AR724X) + depends on (SOC_AR71XX || SOC_AR724X) select USB_OHCI_HCD_PLATFORM default y help @@ -344,7 +394,7 @@ config USB_OHCI_ATH79 config USB_OHCI_HCD_PPC_OF_BE bool "OHCI support for OF platform bus (big endian)" - depends on USB_OHCI_HCD && PPC_OF + depends on PPC_OF select USB_OHCI_BIG_ENDIAN_DESC select USB_OHCI_BIG_ENDIAN_MMIO ---help--- @@ -353,7 +403,7 @@ config USB_OHCI_HCD_PPC_OF_BE config USB_OHCI_HCD_PPC_OF_LE bool "OHCI support for OF platform bus (little endian)" - depends on USB_OHCI_HCD && PPC_OF + depends on PPC_OF select USB_OHCI_LITTLE_ENDIAN ---help--- Enables support for little-endian USB controllers present on the @@ -361,12 +411,12 @@ config USB_OHCI_HCD_PPC_OF_LE config USB_OHCI_HCD_PPC_OF bool - depends on USB_OHCI_HCD && PPC_OF + depends on PPC_OF default USB_OHCI_HCD_PPC_OF_BE || USB_OHCI_HCD_PPC_OF_LE config USB_OHCI_HCD_PCI bool "OHCI support for PCI-bus USB controllers" - depends on USB_OHCI_HCD && PCI && (STB03xxx || PPC_MPC52xx || USB_OHCI_HCD_PPC_OF) + depends on PCI && (STB03xxx || PPC_MPC52xx || USB_OHCI_HCD_PPC_OF) default y select USB_OHCI_LITTLE_ENDIAN ---help--- @@ -375,7 +425,7 @@ config USB_OHCI_HCD_PCI config USB_OHCI_HCD_SSB bool "OHCI support for Broadcom SSB OHCI core (DEPRECATED)" - depends on USB_OHCI_HCD && (SSB = y || SSB = USB_OHCI_HCD) + depends on (SSB = y || SSB = USB_OHCI_HCD) select USB_HCD_SSB select USB_OHCI_HCD_PLATFORM default n @@ -393,7 +443,7 @@ config USB_OHCI_HCD_SSB config USB_OHCI_SH bool "OHCI support for SuperH USB controller (DEPRECATED)" - depends on USB_OHCI_HCD && SUPERH + depends on SUPERH select USB_OHCI_HCD_PLATFORM ---help--- This option is deprecated now and the driver was removed, use @@ -404,13 +454,13 @@ config USB_OHCI_SH config USB_OHCI_EXYNOS boolean "OHCI support for Samsung EXYNOS SoC Series" - depends on USB_OHCI_HCD && ARCH_EXYNOS + depends on ARCH_EXYNOS help Enable support for the Samsung Exynos SOC's on-chip OHCI controller. config USB_CNS3XXX_OHCI bool "Cavium CNS3XXX OHCI Module (DEPRECATED)" - depends on USB_OHCI_HCD && ARCH_CNS3XXX + depends on ARCH_CNS3XXX select USB_OHCI_HCD_PLATFORM ---help--- This option is deprecated now and the driver was removed, use @@ -421,7 +471,6 @@ config USB_CNS3XXX_OHCI config USB_OHCI_HCD_PLATFORM bool "Generic OHCI driver for a platform device" - depends on USB_OHCI_HCD default n ---help--- Adds an OHCI host driver for a generic platform device, which @@ -429,35 +478,36 @@ config USB_OHCI_HCD_PLATFORM If unsure, say N. -config USB_EHCI_HCD_PLATFORM - tristate "Generic EHCI driver for a platform device" - depends on USB_EHCI_HCD - default n - ---help--- - Adds an EHCI host driver for a generic platform device, which - provides a memory space and an irq. +config USB_OCTEON_OHCI + bool "Octeon on-chip OHCI support" + depends on CPU_CAVIUM_OCTEON + default USB_OCTEON_EHCI + select USB_OHCI_BIG_ENDIAN_MMIO + select USB_OHCI_LITTLE_ENDIAN + help + Enable support for the Octeon II SOC's on-chip OHCI + controller. It is needed for low-speed USB 1.0 device + support. All CN6XXX based chips with USB are supported. - If unsure, say N. config USB_OHCI_BIG_ENDIAN_DESC bool - depends on USB_OHCI_HCD default n config USB_OHCI_BIG_ENDIAN_MMIO bool - depends on USB_OHCI_HCD default n config USB_OHCI_LITTLE_ENDIAN bool - depends on USB_OHCI_HCD default n if STB03xxx || PPC_MPC52xx default y +endif # USB_OHCI_HCD + config USB_UHCI_HCD tristate "UHCI HCD (most Intel and VIA) support" - depends on USB && (PCI || SPARC_LEON || ARCH_VT8500) + depends on PCI || SPARC_LEON || ARCH_VT8500 ---help--- The Universal Host Controller Interface is a standard by Intel for accessing the USB hardware in the PC (which is also called the USB @@ -497,7 +547,7 @@ config USB_UHCI_BIG_ENDIAN_DESC config USB_FHCI_HCD tristate "Freescale QE USB Host Controller support" - depends on USB && OF_GPIO && QE_GPIO && QUICC_ENGINE + depends on OF_GPIO && QE_GPIO && QUICC_ENGINE select FSL_GTM select QE_USB help @@ -514,7 +564,7 @@ config FHCI_DEBUG config USB_U132_HCD tristate "Elan U132 Adapter Host Controller" - depends on USB && USB_FTDI_ELAN + depends on USB_FTDI_ELAN default M help The U132 adapter is a USB to CardBus adapter specifically designed @@ -542,7 +592,6 @@ config USB_U132_HCD config USB_SL811_HCD tristate "SL811HS HCD support" - depends on USB help The SL811HS is a single-port USB controller that supports either host side or peripheral side roles. Enable this option if your @@ -574,7 +623,6 @@ config USB_SL811_CS config USB_R8A66597_HCD tristate "R8A66597 HCD support" - depends on USB help The R8A66597 is a USB 2.0 host and peripheral controller. @@ -586,7 +634,6 @@ config USB_R8A66597_HCD config USB_RENESAS_USBHS_HCD tristate "Renesas USBHS HCD support" - depends on USB depends on USB_RENESAS_USBHS help The Renesas USBHS is a USB 2.0 host and peripheral controller. @@ -611,7 +658,7 @@ config USB_WHCI_HCD config USB_HWA_HCD tristate "Host Wire Adapter (HWA) driver" - depends on USB && UWB + depends on UWB select USB_WUSB select UWB_HWA help @@ -625,7 +672,7 @@ config USB_HWA_HCD config USB_IMX21_HCD tristate "i.MX21 HCD support" - depends on USB && ARM && ARCH_MXC + depends on ARM && ARCH_MXC help This driver enables support for the on-chip USB host in the i.MX21 processor. @@ -633,27 +680,7 @@ config USB_IMX21_HCD To compile this driver as a module, choose M here: the module will be called "imx21-hcd". -config USB_OCTEON_EHCI - bool "Octeon on-chip EHCI support" - depends on USB && USB_EHCI_HCD && CPU_CAVIUM_OCTEON - default n - select USB_EHCI_BIG_ENDIAN_MMIO - help - Enable support for the Octeon II SOC's on-chip EHCI - controller. It is needed for high-speed (480Mbit/sec) - USB 2.0 device support. All CN6XXX based chips with USB are - supported. -config USB_OCTEON_OHCI - bool "Octeon on-chip OHCI support" - depends on USB && USB_OHCI_HCD && CPU_CAVIUM_OCTEON - default USB_OCTEON_EHCI - select USB_OHCI_BIG_ENDIAN_MMIO - select USB_OHCI_LITTLE_ENDIAN - help - Enable support for the Octeon II SOC's on-chip OHCI - controller. It is needed for low-speed USB 1.0 device - support. All CN6XXX based chips with USB are supported. config USB_OCTEON2_COMMON bool |