diff options
Diffstat (limited to 'drivers/usb/gadget/dwc_otg')
20 files changed, 18091 insertions, 166 deletions
diff --git a/drivers/usb/gadget/dwc_otg/dwc_otg_cil.c b/drivers/usb/gadget/dwc_otg/dwc_otg_cil.c index 61a8879fc10..1ba37fe7eba 100644 --- a/drivers/usb/gadget/dwc_otg/dwc_otg_cil.c +++ b/drivers/usb/gadget/dwc_otg/dwc_otg_cil.c @@ -1838,7 +1838,7 @@ void ppc4xx_start_plb_dma(dwc_otg_core_if_t *_core_if, void *src, void *dst, uns mtdcr(DCRN_DMACR0 + (dma_ch * 8), control); -#ifdef OTG_PLB_DMA_DBG +#ifdef CONFIG_OTG_PLB_DMA_DBG ppc4xx_dump_dma(dma_ch); #endif ppc4xx_enable_dma(dma_ch); @@ -1917,7 +1917,7 @@ void dwc_otg_hc_write_packet(dwc_otg_core_if_t * _core_if, dwc_hc_t * _hc) while (mfdcr(DCRN_DMACR0 + (PLB_DMA_CH*8)) & DMA_CE_ENABLE) { } dma_sts = (uint32_t)ppc4xx_get_dma_status(); -#ifdef OTG_PLB_DMA_DBG +#ifdef CONFIG_OTG_PLB_DMA_DBG if (!(dma_sts & DMA_CS0)) { printk("Status (Terminal Count not occured) 0x%08x\n", mfdcr(DCRN_DMASR)); } @@ -1926,7 +1926,7 @@ void dwc_otg_hc_write_packet(dwc_otg_core_if_t * _core_if, dwc_hc_t * _hc) printk("Status (Channel Error) 0x%08x\n", mfdcr(DCRN_DMASR)); } ppc4xx_clr_dma_status(PLB_DMA_CH); -#ifdef OTG_PLB_DMA_DBG +#ifdef CONFIG_OTG_PLB_DMA_DBG printk("%32s DMA Status =0x%08x\n", __FUNCTION__, mfdcr(DCRN_DMASR)); /* vj_dbg */ #endif @@ -2687,7 +2687,7 @@ void dwc_otg_ep_write_packet(dwc_otg_core_if_t * _core_if, dwc_ep_t * _ep, while (mfdcr(DCRN_DMACR0 + (DMA_CH0*8)) & DMA_CE_ENABLE) { } dma_sts = (uint32_t)ppc4xx_get_dma_status(); -#ifdef OTG_PLB_DMA_DBG +#ifdef CONFIG_OTG_PLB_DMA_DBG if (!(dma_sts & DMA_CS0)) { printk("DMA Status (Terminal Count not occured) 0x%08x\n", mfdcr(DCRN_DMASR)); } @@ -2696,7 +2696,7 @@ void dwc_otg_ep_write_packet(dwc_otg_core_if_t * _core_if, dwc_ep_t * _ep, printk("DMA Status (Channel 0 Error) 0x%08x\n", mfdcr(DCRN_DMASR)); } ppc4xx_clr_dma_status(PLB_DMA_CH); -#ifdef OTG_PLB_DMA_DBG +#ifdef CONFIG_OTG_PLB_DMA_DBG printk("%32s DMA Status =0x%08x\n", __FUNCTION__, mfdcr(DCRN_DMASR)); /* vj_dbg */ #endif #endif /* CONFIG_OTG_PLB_DMA_TASKLET */ @@ -2841,7 +2841,7 @@ void dwc_otg_read_packet(dwc_otg_core_if_t * _core_if, while (mfdcr(DCRN_DMACR0 + (DMA_CH0*8)) & DMA_CE_ENABLE) { } dma_sts = (uint32_t)ppc4xx_get_dma_status(); -#ifdef OTG_PLB_DMA_DBG +#ifdef CONFIG_OTG_PLB_DMA_DBG if (!(dma_sts & DMA_CS0)) { printk("DMA Status (Terminal Count not occured) 0x%08x\n", mfdcr(DCRN_DMASR)); } @@ -2850,7 +2850,7 @@ void dwc_otg_read_packet(dwc_otg_core_if_t * _core_if, printk("DMA Status (Channel 0 Error) 0x%08x\n", mfdcr(DCRN_DMASR)); } ppc4xx_clr_dma_status(PLB_DMA_CH); -#ifdef OTG_PLB_DMA_DBG +#ifdef CONFIG_OTG_PLB_DMA_DBG printk("%32s DMA Status =0x%08x\n", __FUNCTION__, mfdcr(DCRN_DMASR)); printk(" Rxed buffer \n"); for( i=0; i< _bytes; i++) { diff --git a/drivers/usb/gadget/dwc_otg/dwc_otg_cil.c.org b/drivers/usb/gadget/dwc_otg/dwc_otg_cil.c.org new file mode 100644 index 00000000000..61a8879fc10 --- /dev/null +++ b/drivers/usb/gadget/dwc_otg/dwc_otg_cil.c.org @@ -0,0 +1,3237 @@ +/* ========================================================================== + * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_cil.c $ + * $Revision: #24 $ + * $Date: 2007/02/07 $ + * $Change: 791271 $ + * + * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, + * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless + * otherwise expressly agreed to in writing between Synopsys and you. + * + * The Software IS NOT an item of Licensed Software or Licensed Product under + * any End User Software License Agreement or Agreement for Licensed Product + * with Synopsys or any supplement thereto. You are permitted to use and + * redistribute this Software in source and binary forms, with or without + * modification, provided that redistributions of source code must retain this + * notice. You may not view, use, disclose, copy or distribute this file or + * any information contained herein except pursuant to this license grant from + * Synopsys. If you do not agree with this notice, including the disclaimer + * below, then you are not authorized to use the Software. + * + * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * ========================================================================== */ + + +/** @file + * + * The Core Interface Layer provides basic services for accessing and + * managing the DWC_otg hardware. These services are used by both the + * Host Controller Driver and the Peripheral Controller Driver. + * + * The CIL manages the memory map for the core so that the HCD and PCD + * don't have to do this separately. It also handles basic tasks like + * reading/writing the registers and data FIFOs in the controller. + * Some of the data access functions provide encapsulation of several + * operations required to perform a task, such as writing multiple + * registers to start a transfer. Finally, the CIL performs basic + * services that are not specific to either the host or device modes + * of operation. These services include management of the OTG Host + * Negotiation Protocol (HNP) and Session Request Protocol (SRP). A + * Diagnostic API is also provided to allow testing of the controller + * hardware. + * + * The Core Interface Layer has the following requirements: + * - Provides basic controller operations. + * - Minimal use of OS services. + * - The OS services used will be abstracted by using inline functions + * or macros. + * + */ +#include <asm/unaligned.h> +#ifdef CONFIG_DWC_DEBUG +#include <linux/jiffies.h> +#endif /* */ + +#include <asm/dcr.h> + +#include "linux/dwc_otg_plat.h" +#include "dwc_otg_regs.h" +#include "dwc_otg_cil.h" + +#ifdef CONFIG_OTG_PLB_DMA_TASKLET +atomic_t release_later = ATOMIC_INIT(0); +#endif +/** + * This function is called to initialize the DWC_otg CSR data + * structures. The register addresses in the device and host + * structures are initialized from the base address supplied by the + * caller. The calling function must make the OS calls to get the + * base address of the DWC_otg controller registers. The core_params + * argument holds the parameters that specify how the core should be + * configured. + * + * @param[in] _reg_base_addr Base address of DWC_otg core registers + * @param[in] _core_params Pointer to the core configuration parameters + * + */ +dwc_otg_core_if_t * dwc_otg_cil_init(const uint32_t * _reg_base_addr, + dwc_otg_core_params_t *_core_params) +{ + dwc_otg_core_if_t * core_if = 0; + dwc_otg_dev_if_t * dev_if = 0; + dwc_otg_host_if_t * host_if = 0; + uint8_t * reg_base = (uint8_t *) _reg_base_addr; + int i = 0; + DWC_DEBUGPL(DBG_CILV, "%s(%p,%p)\n", __func__, _reg_base_addr, + _core_params); + core_if = kmalloc(sizeof(dwc_otg_core_if_t), GFP_KERNEL); + if (core_if == 0) { + DWC_DEBUGPL(DBG_CIL,"Allocation of dwc_otg_core_if_t failed\n"); + return 0; + } + memset(core_if, 0, sizeof(dwc_otg_core_if_t)); + core_if->core_params = _core_params; + core_if->core_global_regs = (dwc_otg_core_global_regs_t *) reg_base; + + /* + * Allocate the Device Mode structures. + */ + dev_if = kmalloc(sizeof(dwc_otg_dev_if_t), GFP_KERNEL); + if (dev_if == 0) { + DWC_DEBUGPL(DBG_CIL,"Allocation of dwc_otg_dev_if_t failed\n"); + kfree(core_if); + return 0; + } + dev_if->dev_global_regs = (dwc_otg_device_global_regs_t *)(reg_base + + DWC_DEV_GLOBAL_REG_OFFSET); + for (i = 0; i < MAX_EPS_CHANNELS; i++) { + dev_if->in_ep_regs[i] = (dwc_otg_dev_in_ep_regs_t *) + (reg_base + DWC_DEV_IN_EP_REG_OFFSET + (i * DWC_EP_REG_OFFSET)); + dev_if->out_ep_regs[i] = (dwc_otg_dev_out_ep_regs_t *) + (reg_base + DWC_DEV_OUT_EP_REG_OFFSET + (i * DWC_EP_REG_OFFSET)); + DWC_DEBUGPL(DBG_CILV, "in_ep_regs[%d]->diepctl=%p\n", i, + &dev_if->in_ep_regs[i]->diepctl); + DWC_DEBUGPL(DBG_CILV, "out_ep_regs[%d]->doepctl=%p\n", i, + &dev_if->out_ep_regs[i]->doepctl); + } + dev_if->speed = 0; // unknown + core_if->dev_if = dev_if; + + /* + * Allocate the Host Mode structures. + */ + host_if = kmalloc(sizeof(dwc_otg_host_if_t), GFP_KERNEL); + if (host_if == 0) { + DWC_DEBUGPL(DBG_CIL,"Allocation of dwc_otg_host_if_t failed\n"); + kfree(dev_if); + kfree(core_if); + return 0; + } + host_if->host_global_regs = (dwc_otg_host_global_regs_t *) + (reg_base + DWC_OTG_HOST_GLOBAL_REG_OFFSET); + host_if->hprt0 = (uint32_t *) (reg_base + DWC_OTG_HOST_PORT_REGS_OFFSET); + + for (i = 0; i < MAX_EPS_CHANNELS; i++) { + host_if->hc_regs[i] = (dwc_otg_hc_regs_t *) + (reg_base + DWC_OTG_HOST_CHAN_REGS_OFFSET + (i * DWC_OTG_CHAN_REGS_OFFSET)); + DWC_DEBUGPL(DBG_CILV, "hc_reg[%d]->hcchar=%p\n", i,&host_if->hc_regs[i]->hcchar); + } + + host_if->num_host_channels = MAX_EPS_CHANNELS; + core_if->host_if = host_if; + for (i = 0; i < MAX_EPS_CHANNELS; i++) { + core_if->data_fifo[i] = + (uint32_t *) (reg_base + DWC_OTG_DATA_FIFO_OFFSET + + (i * DWC_OTG_DATA_FIFO_SIZE)); + DWC_DEBUGPL(DBG_CILV, "data_fifo[%d]=0x%08x\n", i, + (unsigned)core_if->data_fifo[i]); + } + core_if->pcgcctl = (uint32_t *) (reg_base + DWC_OTG_PCGCCTL_OFFSET); + + /* + * Store the contents of the hardware configuration registers here for + * easy access later. + */ + core_if->hwcfg1.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg1); + core_if->hwcfg2.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg2); +#ifdef CONFIG_DWC_SLAVE + core_if->hwcfg2.b.architecture = DWC_SLAVE_ONLY_ARCH; +#endif + core_if->hwcfg3.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg3); + core_if->hwcfg4.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg4); + DWC_DEBUGPL(DBG_CILV, "hwcfg1=%08x\n", core_if->hwcfg1.d32); + DWC_DEBUGPL(DBG_CILV, "hwcfg2=%08x\n", core_if->hwcfg2.d32); + DWC_DEBUGPL(DBG_CILV, "hwcfg3=%08x\n", core_if->hwcfg3.d32); + DWC_DEBUGPL(DBG_CILV, "hwcfg4=%08x\n", core_if->hwcfg4.d32); + DWC_DEBUGPL(DBG_CILV, "op_mode=%0x\n", core_if->hwcfg2.b.op_mode); + DWC_DEBUGPL(DBG_CILV, "arch=%0x\n", core_if->hwcfg2.b.architecture); + DWC_DEBUGPL(DBG_CILV, "num_dev_ep=%d\n",core_if->hwcfg2.b.num_dev_ep + 1); + DWC_DEBUGPL(DBG_CILV, "num_host_chan=%d\n",core_if->hwcfg2.b.num_host_chan); + DWC_DEBUGPL(DBG_CILV, "nonperio_tx_q_depth=0x%0x\n", + core_if->hwcfg2.b.nonperio_tx_q_depth); + DWC_DEBUGPL(DBG_CILV, "host_perio_tx_q_depth=0x%0x\n", + core_if->hwcfg2.b.host_perio_tx_q_depth); + DWC_DEBUGPL(DBG_CILV, "dev_token_q_depth=0x%0x\n", + core_if->hwcfg2.b.dev_token_q_depth); + DWC_DEBUGPL(DBG_CILV, "Total FIFO SZ=%d\n", + core_if->hwcfg3.b.dfifo_depth); + DWC_DEBUGPL(DBG_CILV, "xfer_size_cntr_width=%0x\n", + core_if->hwcfg3.b.xfer_size_cntr_width); + + /* + * Set the SRP sucess bit for FS-I2c + */ + core_if->srp_success = 0; + core_if->srp_timer_started = 0; + return core_if; +} + + +/** + * This function frees the structures allocated by dwc_otg_cil_init(). + * + * @param[in] _core_if The core interface pointer returned from + * dwc_otg_cil_init(). + * + */ +void dwc_otg_cil_remove(dwc_otg_core_if_t * _core_if) +{ + /* Disable all interrupts */ + dwc_modify_reg32(&_core_if->core_global_regs->gahbcfg, 1, 0); + dwc_write_reg32(&_core_if->core_global_regs->gintmsk, 0); + if (_core_if->dev_if) { + kfree(_core_if->dev_if); + } + if (_core_if->host_if) { + kfree(_core_if->host_if); + } + kfree(_core_if); +} + + +/** + * This function enables the controller's Global Interrupt in the AHB Config + * register. + * + * @param[in] _core_if Programming view of DWC_otg controller. + */ +extern void dwc_otg_enable_global_interrupts(dwc_otg_core_if_t * _core_if) +{ + gahbcfg_data_t ahbcfg = {.d32 = 0}; + ahbcfg.b.glblintrmsk = 1; /* Enable interrupts */ + dwc_modify_reg32(&_core_if->core_global_regs->gahbcfg, 0, ahbcfg.d32); +} + +/** + * This function disables the controller's Global Interrupt in the AHB Config + * register. + * + * @param[in] _core_if Programming view of DWC_otg controller. + */ +extern void dwc_otg_disable_global_interrupts(dwc_otg_core_if_t * _core_if) +{ + gahbcfg_data_t ahbcfg = {.d32 = 0}; + ahbcfg.b.glblintrmsk = 1; /* Enable interrupts */ + dwc_modify_reg32(&_core_if->core_global_regs->gahbcfg, ahbcfg.d32, 0); +} + +/** + * This function initializes the commmon interrupts, used in both + * device and host modes. + * + * @param[in] _core_if Programming view of the DWC_otg controller + * + */ +static void dwc_otg_enable_common_interrupts(dwc_otg_core_if_t * _core_if) +{ + dwc_otg_core_global_regs_t * global_regs = _core_if->core_global_regs; + gintmsk_data_t intr_mask = {.d32 = 0}; + + /* Clear any pending OTG Interrupts */ + dwc_write_reg32(&global_regs->gotgint, 0xFFFFFFFF); + + /* Clear any pending interrupts */ + dwc_write_reg32(&global_regs->gintsts, 0xFFFFFFFF); + + /* + * Enable the interrupts in the GINTMSK. + */ + intr_mask.b.modemismatch = 1; + intr_mask.b.otgintr = 1; + if (!_core_if->dma_enable) { + intr_mask.b.rxstsqlvl = 1; + } + intr_mask.b.conidstschng = 1; + intr_mask.b.wkupintr = 1; + intr_mask.b.disconnect = 1; + intr_mask.b.usbsuspend = 1; + intr_mask.b.sessreqintr = 1; + dwc_write_reg32(&global_regs->gintmsk, intr_mask.d32); +} + + +/** + * Initializes the FSLSPClkSel field of the HCFG register depending on the PHY + * type. + */ +static void init_fslspclksel(dwc_otg_core_if_t * _core_if) +{ + uint32_t val; + hcfg_data_t hcfg; + if (((_core_if->hwcfg2.b.hs_phy_type == 2) && + (_core_if->hwcfg2.b.fs_phy_type == 1) && + (_core_if->core_params->ulpi_fs_ls)) || + (_core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) { + /* Full speed PHY */ + val = DWC_HCFG_48_MHZ; + } else { + /* High speed PHY running at full speed or high speed */ + val = DWC_HCFG_30_60_MHZ; + } + DWC_DEBUGPL(DBG_CIL, "Initializing HCFG.FSLSPClkSel to 0x%1x\n", val); + hcfg.d32 = dwc_read_reg32(&_core_if->host_if->host_global_regs->hcfg); + hcfg.b.fslspclksel = val; + dwc_write_reg32(&_core_if->host_if->host_global_regs->hcfg, hcfg.d32); +} + + +/** + * Initializes the DevSpd field of the DCFG register depending on the PHY type + * and the enumeration speed of the device. + */ +static void init_devspd(dwc_otg_core_if_t * _core_if) +{ + uint32_t val; + dcfg_data_t dcfg; + if (((_core_if->hwcfg2.b.hs_phy_type == 2) && + (_core_if->hwcfg2.b.fs_phy_type == 1) && + (_core_if->core_params->ulpi_fs_ls)) || + (_core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) { + /* Full speed PHY */ + val = 0x3; + } else if (_core_if->core_params->speed == DWC_SPEED_PARAM_FULL) { + /* High speed PHY running at full speed */ + val = 0x1; + } else { + /* High speed PHY running at high speed */ + val = 0x0; + } + DWC_DEBUGPL(DBG_CIL, "Initializing DCFG.DevSpd to 0x%1x\n", val); + dcfg.d32 = dwc_read_reg32(&_core_if->dev_if->dev_global_regs->dcfg); + dcfg.b.devspd = val; + dwc_write_reg32(&_core_if->dev_if->dev_global_regs->dcfg, dcfg.d32); +} + + +/** + * This function calculates the number of IN EPS + * using GHWCFG1 and GHWCFG2 registers values + * + * @param _pcd the pcd structure. + */ +static uint32_t calc_num_in_eps(dwc_otg_core_if_t * _core_if) +{ + uint32_t num_in_eps = 0; + uint32_t num_eps = _core_if->hwcfg2.b.num_dev_ep; + uint32_t hwcfg1 = _core_if->hwcfg1.d32 >> 2; + uint32_t num_tx_fifos = _core_if->hwcfg4.b.num_in_eps; + int i; + for (i = 0; i < num_eps; ++i) { + if (!(hwcfg1 & 0x1)) + num_in_eps++; + hwcfg1 >>= 2; + } + if (_core_if->hwcfg4.b.ded_fifo_en) { + num_in_eps = (num_in_eps > num_tx_fifos) ? num_tx_fifos : num_in_eps; + } + return num_in_eps; +} + + +/** + * This function calculates the number of OUT EPS + * using GHWCFG1 and GHWCFG2 registers values + * + * @param _pcd the pcd structure. + */ +static uint32_t calc_num_out_eps(dwc_otg_core_if_t * _core_if) +{ + uint32_t num_out_eps = 0; + uint32_t num_eps = _core_if->hwcfg2.b.num_dev_ep; + uint32_t hwcfg1 = _core_if->hwcfg1.d32 >> 2; + int i; + for (i = 0; i < num_eps; ++i) { + if (!(hwcfg1 & 0x2)) + num_out_eps++; + hwcfg1 >>= 2; + } + return num_out_eps; +} + + +/** + * This function initializes the DWC_otg controller registers and + * prepares the core for device mode or host mode operation. + * + * @param _core_if Programming view of the DWC_otg controller + * + */ +void dwc_otg_core_init(dwc_otg_core_if_t * _core_if) +{ + int i = 0; + dwc_otg_core_global_regs_t * global_regs = _core_if->core_global_regs; + dwc_otg_dev_if_t * dev_if = _core_if->dev_if; + gahbcfg_data_t ahbcfg = {.d32 = 0}; + gusbcfg_data_t usbcfg = {.d32 = 0}; + gi2cctl_data_t i2cctl = {.d32 = 0}; + DWC_DEBUGPL(DBG_CILV, "dwc_otg_core_init(%p)\n", _core_if); + + /* Common Initialization */ + usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg); + DWC_DEBUGPL(DBG_CIL, "USB config register: 0x%08x\n", usbcfg.d32); + + /* Program the ULPI External VBUS bit if needed */ +#if defined(OTG_EXT_CHG_PUMP) || defined(CONFIG_460EX) || defined(CONFIG_APM82181) + usbcfg.b.ulpi_ext_vbus_drv = 1; +#else + //usbcfg.b.ulpi_ext_vbus_drv = 0; + usbcfg.b.ulpi_ext_vbus_drv = + (_core_if->core_params->phy_ulpi_ext_vbus == + DWC_PHY_ULPI_EXTERNAL_VBUS) ? 1 : 0; +#endif + + /* Set external TS Dline pulsing */ + usbcfg.b.term_sel_dl_pulse = (_core_if->core_params->ts_dline == 1) ? 1 : 0; + dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32); + + /* Reset the Controller */ + dwc_otg_core_reset(_core_if); + + /* Initialize parameters from Hardware configuration registers. */ + dev_if->num_in_eps = calc_num_in_eps(_core_if); + dev_if->num_out_eps = calc_num_out_eps(_core_if); + DWC_DEBUGPL(DBG_CIL, "num_dev_perio_in_ep=%d\n", + _core_if->hwcfg4.b.num_dev_perio_in_ep); + DWC_DEBUGPL(DBG_CIL, "Is power optimization enabled? %s\n", + _core_if->hwcfg4.b.power_optimiz ? "Yes" : "No"); + DWC_DEBUGPL(DBG_CIL, "vbus_valid filter enabled? %s\n", + _core_if->hwcfg4.b.vbus_valid_filt_en ? "Yes" : "No"); + DWC_DEBUGPL(DBG_CIL, "iddig filter enabled? %s\n", + _core_if->hwcfg4.b.iddig_filt_en ? "Yes" : "No"); + + for (i = 0; i < _core_if->hwcfg4.b.num_dev_perio_in_ep; i++) { + dev_if->perio_tx_fifo_size[i] = + dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]) >> 16; + DWC_DEBUGPL(DBG_CIL, "Periodic Tx FIFO SZ #%d=0x%0x\n", i, + dev_if->perio_tx_fifo_size[i]); + } + for (i = 0; i < _core_if->hwcfg4.b.num_in_eps; i++) { + dev_if->tx_fifo_size[i] = + dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]) >> 16; + DWC_DEBUGPL(DBG_CIL, "Tx FIFO SZ #%d=0x%0x\n", i, + dev_if->perio_tx_fifo_size[i]); + } + _core_if->total_fifo_size = _core_if->hwcfg3.b.dfifo_depth; + _core_if->rx_fifo_size = dwc_read_reg32(&global_regs->grxfsiz); + _core_if->nperio_tx_fifo_size = dwc_read_reg32(&global_regs->gnptxfsiz) >> 16; + DWC_DEBUGPL(DBG_CIL, "Total FIFO SZ=%d\n", _core_if->total_fifo_size); + DWC_DEBUGPL(DBG_CIL, "Rx FIFO SZ=%d\n", _core_if->rx_fifo_size); + DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO SZ=%d\n",_core_if->nperio_tx_fifo_size); + + /* This programming sequence needs to happen in FS mode before any other + * programming occurs */ + if ((_core_if->core_params->speed == DWC_SPEED_PARAM_FULL) && + (_core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) { + + /* If FS mode with FS PHY */ + + /* core_init() is now called on every switch so only call the + * following for the first time through. + */ + if (!_core_if->phy_init_done) { + _core_if->phy_init_done = 1; + DWC_DEBUGPL(DBG_CIL, "FS_PHY detected\n"); + usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg); + usbcfg.b.physel = 1; + dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32); + + /* Reset after a PHY select */ + dwc_otg_core_reset(_core_if); + } + + /* Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS. Also + * do this on HNP Dev/Host mode switches (done in dev_init and + * host_init). + */ + if (dwc_otg_is_host_mode(_core_if)) { + DWC_DEBUGPL(DBG_CIL, "host mode\n"); + init_fslspclksel(_core_if); + } else { + DWC_DEBUGPL(DBG_CIL, "device mode\n"); + init_devspd(_core_if); + } + + if (_core_if->core_params->i2c_enable) { + DWC_DEBUGPL(DBG_CIL, "FS_PHY Enabling I2c\n"); + + /* Program GUSBCFG.OtgUtmifsSel to I2C */ + usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg); + usbcfg.b.otgutmifssel = 1; + dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32); + + /* Program GI2CCTL.I2CEn */ + i2cctl.d32 = dwc_read_reg32(&global_regs->gi2cctl); + i2cctl.b.i2cdevaddr = 1; + i2cctl.b.i2cen = 0; + dwc_write_reg32(&global_regs->gi2cctl, i2cctl.d32); + i2cctl.b.i2cen = 1; + dwc_write_reg32(&global_regs->gi2cctl, i2cctl.d32); + } + } /* endif speed == DWC_SPEED_PARAM_FULL */ + else { + /* High speed PHY. */ + if (!_core_if->phy_init_done) { + _core_if->phy_init_done = 1; + DWC_DEBUGPL(DBG_CIL, "High spped PHY\n"); + /* HS PHY parameters. These parameters are preserved + * during soft reset so only program the first time. Do + * a soft reset immediately after setting phyif. + */ + // test-only: in AMCC 460EX code not used!!!??? + usbcfg.b.ulpi_utmi_sel = _core_if->core_params->phy_type; + if (usbcfg.b.ulpi_utmi_sel == 1) { + DWC_DEBUGPL(DBG_CIL, "ULPI\n"); + /* ULPI interface */ + usbcfg.b.phyif = 0; + usbcfg.b.ddrsel = _core_if->core_params->phy_ulpi_ddr; + } else { + /* UTMI+ interface */ + if (_core_if->core_params->phy_utmi_width == 16) { + usbcfg.b.phyif = 1; + DWC_DEBUGPL(DBG_CIL, "UTMI+ 16\n"); + } else { + DWC_DEBUGPL(DBG_CIL, "UTMI+ 8\n"); + usbcfg.b.phyif = 0; + } + } + dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32); + /* Reset after setting the PHY parameters */ + dwc_otg_core_reset(_core_if); + } + } + if ((_core_if->hwcfg2.b.hs_phy_type == 2) && + (_core_if->hwcfg2.b.fs_phy_type == 1) && + (_core_if->core_params->ulpi_fs_ls)) { + DWC_DEBUGPL(DBG_CIL, "Setting ULPI FSLS\n"); + usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg); + usbcfg.b.ulpi_fsls = 1; + usbcfg.b.ulpi_clk_sus_m = 1; + dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32); + } else { + DWC_DEBUGPL(DBG_CIL, "Setting ULPI FSLS=0\n"); + usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg); + usbcfg.b.ulpi_fsls = 0; + usbcfg.b.ulpi_clk_sus_m = 0; + dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32); + } + + /* Program the GAHBCFG Register. */ + switch (_core_if->hwcfg2.b.architecture) { + case DWC_SLAVE_ONLY_ARCH: + DWC_DEBUGPL(DBG_CIL, "Slave Only Mode\n"); + ahbcfg.b.nptxfemplvl_txfemplvl = DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY; + ahbcfg.b.ptxfemplvl = DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY; + _core_if->dma_enable = 0; + break; + case DWC_EXT_DMA_ARCH: + DWC_DEBUGPL(DBG_CIL, "External DMA Mode\n"); + ahbcfg.b.hburstlen = _core_if->core_params->dma_burst_size; + _core_if->dma_enable = (_core_if->core_params->dma_enable != 0); + break; + case DWC_INT_DMA_ARCH: + DWC_DEBUGPL(DBG_CIL, "Internal DMA Mode\n"); + #if defined(CONFIG_APM82181) + /* Avoid system hang during concurrently using USB and SATA */ + ahbcfg.b.hburstlen = DWC_GAHBCFG_INT_DMA_BURST_INCR16; + #else + ahbcfg.b.hburstlen = DWC_GAHBCFG_INT_DMA_BURST_INCR; + #endif + _core_if->dma_enable = (_core_if->core_params->dma_enable != 0); + break; + } + ahbcfg.b.dmaenable = _core_if->dma_enable; + dwc_write_reg32(&global_regs->gahbcfg, ahbcfg.d32); + _core_if->en_multiple_tx_fifo = _core_if->hwcfg4.b.ded_fifo_en; + + /* + * Program the GUSBCFG register. + */ + usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg); + switch (_core_if->hwcfg2.b.op_mode) { + case DWC_MODE_HNP_SRP_CAPABLE: + usbcfg.b.hnpcap = (_core_if->core_params->otg_cap == + DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE); + usbcfg.b.srpcap = (_core_if->core_params->otg_cap != + DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE); + break; + case DWC_MODE_SRP_ONLY_CAPABLE: + usbcfg.b.hnpcap = 0; + usbcfg.b.srpcap = (_core_if->core_params->otg_cap != + DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE); + break; + case DWC_MODE_NO_HNP_SRP_CAPABLE: + usbcfg.b.hnpcap = 0; + usbcfg.b.srpcap = 0; + break; + case DWC_MODE_SRP_CAPABLE_DEVICE: + usbcfg.b.hnpcap = 0; + usbcfg.b.srpcap = (_core_if->core_params->otg_cap != + DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE); + break; + case DWC_MODE_NO_SRP_CAPABLE_DEVICE: + usbcfg.b.hnpcap = 0; + usbcfg.b.srpcap = 0; + break; + case DWC_MODE_SRP_CAPABLE_HOST: + usbcfg.b.hnpcap = 0; + usbcfg.b.srpcap = (_core_if->core_params->otg_cap != + DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE); + break; + case DWC_MODE_NO_SRP_CAPABLE_HOST: + usbcfg.b.hnpcap = 0; + usbcfg.b.srpcap = 0; + break; + } + dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32); + + /* Enable common interrupts */ + dwc_otg_enable_common_interrupts(_core_if); + + /* Do device or host intialization based on mode during PCD + * and HCD initialization + */ + if (dwc_otg_is_host_mode(_core_if)) { + DWC_DEBUGPL(DBG_ANY, "Host Mode\n"); + _core_if->op_state = A_HOST; + } else { + DWC_DEBUGPL(DBG_ANY, "Device Mode\n"); + _core_if->op_state = B_PERIPHERAL; +#ifdef CONFIG_DWC_DEVICE_ONLY + dwc_otg_core_dev_init(_core_if); +#endif /* */ + } +} + + +/** + * This function enables the Device mode interrupts. + * + * @param _core_if Programming view of DWC_otg controller + */ +void dwc_otg_enable_device_interrupts(dwc_otg_core_if_t * _core_if) +{ + gintmsk_data_t intr_mask = {.d32 = 0}; + dwc_otg_core_global_regs_t * global_regs = _core_if->core_global_regs; + DWC_DEBUGPL(DBG_CIL, "%s()\n", __func__); + + /* Disable all interrupts. */ + dwc_write_reg32(&global_regs->gintmsk, 0); + + /* Clear any pending interrupts */ + dwc_write_reg32(&global_regs->gintsts, 0xFFFFFFFF); + + /* Enable the common interrupts */ + dwc_otg_enable_common_interrupts(_core_if); + + /* Enable interrupts */ + intr_mask.b.usbreset = 1; + intr_mask.b.enumdone = 1; + intr_mask.b.inepintr = 1; + intr_mask.b.outepintr = 1; + intr_mask.b.erlysuspend = 1; + if (_core_if->en_multiple_tx_fifo == 0) { + intr_mask.b.epmismatch = 1; + } + + /** @todo NGS: Should this be a module parameter? */ +#ifdef USE_PERIODIC_EP + intr_mask.b.isooutdrop = 1; + intr_mask.b.eopframe = 1; + intr_mask.b.incomplisoin = 1; + intr_mask.b.incomplisoout = 1; +#endif /* */ + dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, + intr_mask.d32); + + DWC_DEBUGPL(DBG_CIL, "%s() gintmsk=%0x\n", __func__, + dwc_read_reg32(&global_regs->gintmsk)); +} + + +/** + * This function initializes the DWC_otg controller registers for + * device mode. + * + * @param _core_if Programming view of DWC_otg controller + * + */ +void dwc_otg_core_dev_init(dwc_otg_core_if_t * _core_if) +{ + int i; + dwc_otg_core_global_regs_t * global_regs = _core_if->core_global_regs; + dwc_otg_dev_if_t * dev_if = _core_if->dev_if; + dwc_otg_core_params_t * params = _core_if->core_params; + dcfg_data_t dcfg = {.d32 = 0}; + grstctl_t resetctl = {.d32 = 0}; + uint32_t rx_fifo_size; + fifosize_data_t nptxfifosize; + fifosize_data_t txfifosize; + dthrctl_data_t dthrctl; + fifosize_data_t ptxfifosize; + + /* Restart the Phy Clock */ + dwc_write_reg32(_core_if->pcgcctl, 0); + + /* Device configuration register */ + init_devspd(_core_if); + dcfg.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dcfg); + dcfg.b.perfrint = DWC_DCFG_FRAME_INTERVAL_80; + dwc_write_reg32(&dev_if->dev_global_regs->dcfg, dcfg.d32); + + /* Configure data FIFO sizes */ + if (_core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) { + DWC_DEBUGPL(DBG_CIL, "Total FIFO Size=%d\n", + _core_if->total_fifo_size); + DWC_DEBUGPL(DBG_CIL, "Rx FIFO Size=%d\n", + params->dev_rx_fifo_size); + DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO Size=%d\n", + params->dev_nperio_tx_fifo_size); + + /* Rx FIFO */ + DWC_DEBUGPL(DBG_CIL, "initial grxfsiz=%08x\n", + dwc_read_reg32(&global_regs->grxfsiz)); + rx_fifo_size = params->dev_rx_fifo_size; + dwc_write_reg32(&global_regs->grxfsiz, rx_fifo_size); + DWC_DEBUGPL(DBG_CIL, "new grxfsiz=%08x\n", + dwc_read_reg32(&global_regs->grxfsiz)); + + /** Set Periodic Tx FIFO Mask all bits 0 */ + _core_if->p_tx_msk = 0; + + /** Set Tx FIFO Mask all bits 0 */ + _core_if->tx_msk = 0; + if (_core_if->en_multiple_tx_fifo == 0) { + /* Non-periodic Tx FIFO */ + DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n", + dwc_read_reg32(&global_regs->gnptxfsiz)); + nptxfifosize.b.depth = params->dev_nperio_tx_fifo_size; + nptxfifosize.b.startaddr = params->dev_rx_fifo_size; + dwc_write_reg32(&global_regs->gnptxfsiz,nptxfifosize.d32); + DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n", + dwc_read_reg32(&global_regs->gnptxfsiz)); + + /**@todo NGS: Fix Periodic FIFO Sizing! */ + /* + * Periodic Tx FIFOs These FIFOs are numbered from 1 to 15. + * Indexes of the FIFO size module parameters in the + * dev_perio_tx_fifo_size array and the FIFO size registers in + * the dptxfsiz array run from 0 to 14. + */ + /** @todo Finish debug of this */ + ptxfifosize.b.startaddr = + nptxfifosize.b.startaddr + nptxfifosize.b.depth; + for (i = 0; i < _core_if->hwcfg4.b.num_dev_perio_in_ep;i++) { + ptxfifosize.b.depth = params->dev_perio_tx_fifo_size[i]; + DWC_DEBUGPL(DBG_CIL,"initial dptxfsiz_dieptxf[%d]=%08x\n", + i,dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i])); + dwc_write_reg32(&global_regs->dptxfsiz_dieptxf[i],ptxfifosize.d32); + DWC_DEBUGPL(DBG_CIL,"new dptxfsiz_dieptxf[%d]=%08x\n", + i,dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i])); + ptxfifosize.b.startaddr += ptxfifosize.b.depth; + } + } else { + + /* + * Tx FIFOs These FIFOs are numbered from 1 to 15. + * Indexes of the FIFO size module parameters in the + * dev_tx_fifo_size array and the FIFO size registers in + * the dptxfsiz_dieptxf array run from 0 to 14. + */ + + /* Non-periodic Tx FIFO */ + DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n", + dwc_read_reg32(&global_regs->gnptxfsiz)); + nptxfifosize.b.depth = params->dev_nperio_tx_fifo_size; + nptxfifosize.b.startaddr = params->dev_rx_fifo_size; + dwc_write_reg32(&global_regs->gnptxfsiz, nptxfifosize.d32); + DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n", + dwc_read_reg32(&global_regs->gnptxfsiz)); + txfifosize.b.startaddr = nptxfifosize.b.startaddr + nptxfifosize.b.depth; + for (i = 1;i < _core_if->hwcfg4.b.num_dev_perio_in_ep;i++) { + txfifosize.b.depth = params->dev_tx_fifo_size[i]; + DWC_DEBUGPL(DBG_CIL,"initial dptxfsiz_dieptxf[%d]=%08x\n", + i,dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i])); + dwc_write_reg32(&global_regs->dptxfsiz_dieptxf[i - 1],txfifosize.d32); + DWC_DEBUGPL(DBG_CIL,"new dptxfsiz_dieptxf[%d]=%08x\n", + i,dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i-1])); + txfifosize.b.startaddr += txfifosize.b.depth; + } + } + } + + /* Flush the FIFOs */ + dwc_otg_flush_tx_fifo(_core_if, 0x10); /* all Tx FIFOs */ + dwc_otg_flush_rx_fifo(_core_if); + + /* Flush the Learning Queue. */ + resetctl.b.intknqflsh = 1; + dwc_write_reg32(&_core_if->core_global_regs->grstctl, resetctl.d32); + + /* Clear all pending Device Interrupts */ + dwc_write_reg32(&dev_if->dev_global_regs->diepmsk, 0); + dwc_write_reg32(&dev_if->dev_global_regs->doepmsk, 0); + dwc_write_reg32(&dev_if->dev_global_regs->daint, 0xFFFFFFFF); + dwc_write_reg32(&dev_if->dev_global_regs->daintmsk, 0); + for (i = 0; i <= dev_if->num_in_eps; i++) { + depctl_data_t depctl; + depctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[i]->diepctl); + if (depctl.b.epena) { + depctl.d32 = 0; + depctl.b.epdis = 1; + depctl.b.snak = 1; + } else { + depctl.d32 = 0; + } + dwc_write_reg32(&dev_if->in_ep_regs[i]->diepctl, depctl.d32); + dwc_write_reg32(&dev_if->in_ep_regs[i]->dieptsiz, 0); + dwc_write_reg32(&dev_if->in_ep_regs[i]->diepdma, 0); + dwc_write_reg32(&dev_if->in_ep_regs[i]->diepint, 0xFF); + } + for (i = 0; i <= dev_if->num_out_eps; i++) { + depctl_data_t depctl; + depctl.d32 = dwc_read_reg32(&dev_if->out_ep_regs[i]->doepctl); + if (depctl.b.epena) { + depctl.d32 = 0; + depctl.b.epdis = 1; + depctl.b.snak = 1; + } else { + depctl.d32 = 0; + } + dwc_write_reg32(&dev_if->out_ep_regs[i]->doepctl, depctl.d32); + dwc_write_reg32(&dev_if->out_ep_regs[i]->doeptsiz, 0); + dwc_write_reg32(&dev_if->out_ep_regs[i]->doepdma, 0); + dwc_write_reg32(&dev_if->out_ep_regs[i]->doepint, 0xFF); + } + if (_core_if->en_multiple_tx_fifo && _core_if->dma_enable) { + dev_if->non_iso_tx_thr_en = _core_if->core_params->thr_ctl & 0x1; + dev_if->iso_tx_thr_en = (_core_if->core_params->thr_ctl >> 1) & 0x1; + dev_if->rx_thr_en = (_core_if->core_params->thr_ctl >> 2) & 0x1; + dev_if->rx_thr_length = _core_if->core_params->rx_thr_length; + dev_if->tx_thr_length = _core_if->core_params->tx_thr_length; + dthrctl.d32 = 0; + dthrctl.b.non_iso_thr_en = dev_if->non_iso_tx_thr_en; + dthrctl.b.iso_thr_en = dev_if->iso_tx_thr_en; + dthrctl.b.tx_thr_len = dev_if->tx_thr_length; + dthrctl.b.rx_thr_en = dev_if->rx_thr_en; + dthrctl.b.rx_thr_len = dev_if->rx_thr_length; + dwc_write_reg32(&dev_if->dev_global_regs->dtknqr3_dthrctl,dthrctl.d32); + DWC_DEBUGPL(DBG_CIL, "Non ISO Tx Thr - %d\nISO Tx Thr - %d\n" + "Rx Thr - %d\nTx Thr Len - %d\nRx Thr Len - %d\n", + dthrctl.b.non_iso_thr_en, dthrctl.b.iso_thr_en, + dthrctl.b.rx_thr_en, dthrctl.b.tx_thr_len, + dthrctl.b.rx_thr_len); + } + dwc_otg_enable_device_interrupts(_core_if); + { + diepmsk_data_t msk = {.d32 = 0}; + msk.b.txfifoundrn = 1; + dwc_modify_reg32(&dev_if->dev_global_regs->diepmsk, msk.d32,msk.d32); + } +} + + +/** + * This function enables the Host mode interrupts. + * + * @param _core_if Programming view of DWC_otg controller + */ +void dwc_otg_enable_host_interrupts(dwc_otg_core_if_t * _core_if) +{ + dwc_otg_core_global_regs_t * global_regs = _core_if->core_global_regs; + gintmsk_data_t intr_mask = {.d32 = 0}; + DWC_DEBUGPL(DBG_CIL, "%s()\n", __func__); + + /* Disable all interrupts. */ + dwc_write_reg32(&global_regs->gintmsk, 0); + + /* Clear any pending interrupts. */ + dwc_write_reg32(&global_regs->gintsts, 0xFFFFFFFF); + + /* Enable the common interrupts */ + dwc_otg_enable_common_interrupts(_core_if); + + /* + * Enable host mode interrupts without disturbing common + * interrupts. + */ + intr_mask.b.sofintr = 1; + intr_mask.b.portintr = 1; + intr_mask.b.hcintr = 1; + dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, intr_mask.d32); +} + +/** + * This function disables the Host Mode interrupts. + * + * @param _core_if Programming view of DWC_otg controller + */ +void dwc_otg_disable_host_interrupts(dwc_otg_core_if_t * _core_if) +{ + dwc_otg_core_global_regs_t * global_regs = _core_if->core_global_regs; + gintmsk_data_t intr_mask = {.d32 = 0}; + DWC_DEBUGPL(DBG_CILV, "%s()\n", __func__); + + /* + * Disable host mode interrupts without disturbing common + * interrupts. + */ + intr_mask.b.sofintr = 1; + intr_mask.b.portintr = 1; + intr_mask.b.hcintr = 1; + intr_mask.b.ptxfempty = 1; + intr_mask.b.nptxfempty = 1; + dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, 0); +} + +#if 0 +/* currently not used, keep it here as if needed later */ +static int phy_read(dwc_otg_core_if_t * _core_if, int addr) +{ + u32 val; + int timeout = 10; + + dwc_write_reg32(&_core_if->core_global_regs->gpvndctl, + 0x02000000 | (addr << 16)); + val = dwc_read_reg32(&_core_if->core_global_regs->gpvndctl); + while (((val & 0x08000000) == 0) && (timeout--)) { + udelay(1000); + val = dwc_read_reg32(&_core_if->core_global_regs->gpvndctl); + } + val = dwc_read_reg32(&_core_if->core_global_regs->gpvndctl); + printk("%s: addr=%02x regval=%02x\n", __func__, addr, val & 0x000000ff); + + return 0; +} +#endif + +#ifdef CONFIG_405EX +static int phy_write(dwc_otg_core_if_t * _core_if, int addr, int val8) +{ + u32 val; + int timeout = 10; + + dwc_write_reg32(&_core_if->core_global_regs->gpvndctl, + 0x02000000 | 0x00400000 | (addr << 16) | (val8 & 0x000000ff)); + val = dwc_read_reg32(&_core_if->core_global_regs->gpvndctl); + while (((val & 0x08000000) == 0) && (timeout--)) { + udelay(1000); + val = dwc_read_reg32(&_core_if->core_global_regs->gpvndctl); + } + val = dwc_read_reg32(&_core_if->core_global_regs->gpvndctl); + + return 0; +} +#endif + +/** + * This function initializes the DWC_otg controller registers for + * host mode. + * + * This function flushes the Tx and Rx FIFOs and it flushes any entries in the + * request queues. Host channels are reset to ensure that they are ready for + * performing transfers. + * + * @param _core_if Programming view of DWC_otg controller + * + */ +void dwc_otg_core_host_init(dwc_otg_core_if_t * _core_if) +{ + dwc_otg_core_global_regs_t * global_regs = _core_if->core_global_regs; + dwc_otg_host_if_t * host_if = _core_if->host_if; + dwc_otg_core_params_t * params = _core_if->core_params; + hprt0_data_t hprt0 = {.d32 = 0}; + fifosize_data_t nptxfifosize; + fifosize_data_t ptxfifosize; + int i; + hcchar_data_t hcchar; + hcfg_data_t hcfg; + dwc_otg_hc_regs_t * hc_regs; + int num_channels; + gotgctl_data_t gotgctl = {.d32 = 0}; + DWC_DEBUGPL(DBG_CILV, "%s(%p)\n", __func__, _core_if); + + /* Restart the Phy Clock */ + dwc_write_reg32(_core_if->pcgcctl, 0); + + /* Initialize Host Configuration Register */ + init_fslspclksel(_core_if); + if (_core_if->core_params->speed == DWC_SPEED_PARAM_FULL) { + hcfg.d32 = dwc_read_reg32(&host_if->host_global_regs->hcfg); + hcfg.b.fslssupp = 1; + dwc_write_reg32(&host_if->host_global_regs->hcfg, hcfg.d32); + } + + /* Configure data FIFO sizes */ + if (_core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) { + DWC_DEBUGPL(DBG_CIL, "Total FIFO Size=%d\n", _core_if->total_fifo_size); + DWC_DEBUGPL(DBG_CIL, "Rx FIFO Size=%d\n", params->host_rx_fifo_size); + DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO Size=%d\n",params->host_nperio_tx_fifo_size); + DWC_DEBUGPL(DBG_CIL, "P Tx FIFO Size=%d\n", params->host_perio_tx_fifo_size); + + /* Rx FIFO */ + DWC_DEBUGPL(DBG_CIL, "initial grxfsiz=%08x\n",dwc_read_reg32(&global_regs->grxfsiz)); + dwc_write_reg32(&global_regs->grxfsiz,params->host_rx_fifo_size); + DWC_DEBUGPL(DBG_CIL, "new grxfsiz=%08x\n",dwc_read_reg32(&global_regs->grxfsiz)); + + /* Non-periodic Tx FIFO */ + DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n",dwc_read_reg32(&global_regs->gnptxfsiz)); + nptxfifosize.b.depth = params->host_nperio_tx_fifo_size; + nptxfifosize.b.startaddr = params->host_rx_fifo_size; + dwc_write_reg32(&global_regs->gnptxfsiz, nptxfifosize.d32); + DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n", dwc_read_reg32(&global_regs->gnptxfsiz)); + + /* Periodic Tx FIFO */ + DWC_DEBUGPL(DBG_CIL, "initial hptxfsiz=%08x\n",dwc_read_reg32(&global_regs->hptxfsiz)); + ptxfifosize.b.depth = params->host_perio_tx_fifo_size; + ptxfifosize.b.startaddr = nptxfifosize.b.startaddr + nptxfifosize.b.depth; + dwc_write_reg32(&global_regs->hptxfsiz, ptxfifosize.d32); + DWC_DEBUGPL(DBG_CIL, "new hptxfsiz=%08x\n", dwc_read_reg32(&global_regs->hptxfsiz)); + } + + /* Clear Host Set HNP Enable in the OTG Control Register */ + gotgctl.b.hstsethnpen = 1; + dwc_modify_reg32(&global_regs->gotgctl, gotgctl.d32, 0); + + /* Make sure the FIFOs are flushed. */ + dwc_otg_flush_tx_fifo(_core_if, 0x10 /* all Tx FIFOs */ ); + dwc_otg_flush_rx_fifo(_core_if); + + /* Flush out any leftover queued requests. */ + num_channels = _core_if->core_params->host_channels; + for (i = 0; i < num_channels; i++) { + hc_regs = _core_if->host_if->hc_regs[i]; + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + hcchar.b.chen = 0; + hcchar.b.chdis = 1; + hcchar.b.epdir = 0; + dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); + } + + /* Halt all channels to put them into a known state. */ + for (i = 0; i < num_channels; i++) { + int count = 0; + hc_regs = _core_if->host_if->hc_regs[i]; + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + hcchar.b.chen = 1; + hcchar.b.chdis = 1; + hcchar.b.epdir = 0; + dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); + DWC_DEBUGPL(DBG_HCDV, "%s: Halt channel %d\n", __func__, i); + + do { + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + if (++count > 200) { + DWC_ERROR + ("%s: Unable to clear halt on channel %d\n", + __func__, i); + break; + } + udelay(100); + } while (hcchar.b.chen); + } + + /* Turn on the vbus power. */ + DWC_PRINT("Init: Port Power? op_state=%d\n", _core_if->op_state); + if (_core_if->op_state == A_HOST) { + hprt0.d32 = dwc_otg_read_hprt0(_core_if); + DWC_PRINT("Init: Power Port (%d)\n", hprt0.b.prtpwr); + if (hprt0.b.prtpwr == 0) { + hprt0.b.prtpwr = 1; + dwc_write_reg32(host_if->hprt0, hprt0.d32); + } + } + +#ifdef CONFIG_405EX + /* Write 0x60 to USB PHY register 7: + * Modify "Indicator Complement" and "Indicator Pass Thru" of + * Interface control register to disable the internal Vbus + * comparator, as suggested by RichTek FAE. + * This produced better results recognizing and mounting USB + * memory sticks on the Makalu 405EX platform. I couldn't see + * any difference on Kilauea, but since it seems to be better + * on Makalu, let's keep it in here too. + */ + phy_write(_core_if, 7, 0x60); +#endif + + dwc_otg_enable_host_interrupts(_core_if); +} + + +/** + * Prepares a host channel for transferring packets to/from a specific + * endpoint. The HCCHARn register is set up with the characteristics specified + * in _hc. Host channel interrupts that may need to be serviced while this + * transfer is in progress are enabled. + * + * @param _core_if Programming view of DWC_otg controller + * @param _hc Information needed to initialize the host channel + */ +void dwc_otg_hc_init(dwc_otg_core_if_t * _core_if, dwc_hc_t * _hc) +{ + uint32_t intr_enable; + hcintmsk_data_t hc_intr_mask; + gintmsk_data_t gintmsk = {.d32 = 0}; + hcchar_data_t hcchar; + hcsplt_data_t hcsplt; + uint8_t hc_num = _hc->hc_num; + dwc_otg_host_if_t * host_if = _core_if->host_if; + dwc_otg_hc_regs_t * hc_regs = host_if->hc_regs[hc_num]; + + /* Clear old interrupt conditions for this host channel. */ + hc_intr_mask.d32 = 0xFFFFFFFF; + hc_intr_mask.b.reserved = 0; + dwc_write_reg32(&hc_regs->hcint, hc_intr_mask.d32); + + /* Enable channel interrupts required for this transfer. */ + hc_intr_mask.d32 = 0; + hc_intr_mask.b.chhltd = 1; + if (_core_if->dma_enable) { + hc_intr_mask.b.ahberr = 1; + if (_hc->error_state && !_hc->do_split && + _hc->ep_type != DWC_OTG_EP_TYPE_ISOC) { + hc_intr_mask.b.ack = 1; + if (_hc->ep_is_in) { + hc_intr_mask.b.datatglerr = 1; + if (_hc->ep_type != DWC_OTG_EP_TYPE_INTR) { + hc_intr_mask.b.nak = 1; + } + } + } + } else { + switch (_hc->ep_type) { + case DWC_OTG_EP_TYPE_CONTROL: + case DWC_OTG_EP_TYPE_BULK: + hc_intr_mask.b.xfercompl = 1; + hc_intr_mask.b.stall = 1; + hc_intr_mask.b.xacterr = 1; + hc_intr_mask.b.datatglerr = 1; + if (_hc->ep_is_in) { + hc_intr_mask.b.bblerr = 1; + } else { + hc_intr_mask.b.nak = 1; + hc_intr_mask.b.nyet = 1; + if (_hc->do_ping) { + hc_intr_mask.b.ack = 1; + } + } + if (_hc->do_split) { + hc_intr_mask.b.nak = 1; + if (_hc->complete_split) { + hc_intr_mask.b.nyet = 1; + } else { + hc_intr_mask.b.ack = 1; + } + } + if (_hc->error_state) { + hc_intr_mask.b.ack = 1; + } + break; + case DWC_OTG_EP_TYPE_INTR: + hc_intr_mask.b.xfercompl = 1; + hc_intr_mask.b.nak = 1; + hc_intr_mask.b.stall = 1; + hc_intr_mask.b.xacterr = 1; + hc_intr_mask.b.datatglerr = 1; + hc_intr_mask.b.frmovrun = 1; + if (_hc->ep_is_in) { + hc_intr_mask.b.bblerr = 1; + } + if (_hc->error_state) { + hc_intr_mask.b.ack = 1; + } + if (_hc->do_split) { + if (_hc->complete_split) { + hc_intr_mask.b.nyet = 1; + } else { + hc_intr_mask.b.ack = 1; + } + } + break; + case DWC_OTG_EP_TYPE_ISOC: + hc_intr_mask.b.xfercompl = 1; + hc_intr_mask.b.frmovrun = 1; + hc_intr_mask.b.ack = 1; + if (_hc->ep_is_in) { + hc_intr_mask.b.xacterr = 1; + hc_intr_mask.b.bblerr = 1; + } + break; + } + } + dwc_write_reg32(&hc_regs->hcintmsk, hc_intr_mask.d32); + + /* Enable the top level host channel interrupt. */ + intr_enable = (1 << hc_num); + dwc_modify_reg32(&host_if->host_global_regs->haintmsk, 0, intr_enable); + + /* Make sure host channel interrupts are enabled. */ + gintmsk.b.hcintr = 1; + dwc_modify_reg32(&_core_if->core_global_regs->gintmsk, 0, gintmsk.d32); + + /* + * Program the HCCHARn register with the endpoint characteristics for + * the current transfer. + */ + hcchar.d32 = 0; + hcchar.b.devaddr = _hc->dev_addr; + hcchar.b.epnum = _hc->ep_num; + hcchar.b.epdir = _hc->ep_is_in; + hcchar.b.lspddev = (_hc->speed == DWC_OTG_EP_SPEED_LOW); + hcchar.b.eptype = _hc->ep_type; + hcchar.b.mps = _hc->max_packet; + dwc_write_reg32(&host_if->hc_regs[hc_num]->hcchar, hcchar.d32); + DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, _hc->hc_num); + DWC_DEBUGPL(DBG_HCDV, " Dev Addr: %d\n", hcchar.b.devaddr); + DWC_DEBUGPL(DBG_HCDV, " Ep Num: %d\n", hcchar.b.epnum); + DWC_DEBUGPL(DBG_HCDV, " Is In: %d\n", hcchar.b.epdir); + DWC_DEBUGPL(DBG_HCDV, " Is Low Speed: %d\n", hcchar.b.lspddev); + DWC_DEBUGPL(DBG_HCDV, " Ep Type: %d\n", hcchar.b.eptype); + DWC_DEBUGPL(DBG_HCDV, " Max Pkt: %d\n", hcchar.b.mps); + DWC_DEBUGPL(DBG_HCDV, " Multi Cnt: %d\n", hcchar.b.multicnt); + + /* + * Program the HCSPLIT register for SPLITs + */ + hcsplt.d32 = 0; + if (_hc->do_split) { + DWC_DEBUGPL(DBG_HCDV, "Programming HC %d with split --> %s\n", + _hc->hc_num,_hc->complete_split ? "CSPLIT" : "SSPLIT"); + hcsplt.b.compsplt = _hc->complete_split; + hcsplt.b.xactpos = _hc->xact_pos; + hcsplt.b.hubaddr = _hc->hub_addr; + hcsplt.b.prtaddr = _hc->port_addr; + DWC_DEBUGPL(DBG_HCDV, " comp split %d\n", _hc->complete_split); + DWC_DEBUGPL(DBG_HCDV, " xact pos %d\n", _hc->xact_pos); + DWC_DEBUGPL(DBG_HCDV, " hub addr %d\n", _hc->hub_addr); + DWC_DEBUGPL(DBG_HCDV, " port addr %d\n", _hc->port_addr); + DWC_DEBUGPL(DBG_HCDV, " is_in %d\n", _hc->ep_is_in); + DWC_DEBUGPL(DBG_HCDV, " Max Pkt: %d\n", hcchar.b.mps); + DWC_DEBUGPL(DBG_HCDV, " xferlen: %d\n", _hc->xfer_len); + } + dwc_write_reg32(&host_if->hc_regs[hc_num]->hcsplt, hcsplt.d32); +} + + +/** + * Attempts to halt a host channel. This function should only be called in + * Slave mode or to abort a transfer in either Slave mode or DMA mode. Under + * normal circumstances in DMA mode, the controller halts the channel when the + * transfer is complete or a condition occurs that requires application + * intervention. + * + * In slave mode, checks for a free request queue entry, then sets the Channel + * Enable and Channel Disable bits of the Host Channel Characteristics + * register of the specified channel to intiate the halt. If there is no free + * request queue entry, sets only the Channel Disable bit of the HCCHARn + * register to flush requests for this channel. In the latter case, sets a + * flag to indicate that the host channel needs to be halted when a request + * queue slot is open. + * + * In DMA mode, always sets the Channel Enable and Channel Disable bits of the + * HCCHARn register. The controller ensures there is space in the request + * queue before submitting the halt request. + * + * Some time may elapse before the core flushes any posted requests for this + * host channel and halts. The Channel Halted interrupt handler completes the + * deactivation of the host channel. + * + * @param _core_if Controller register interface. + * @param _hc Host channel to halt. + * @param _halt_status Reason for halting the channel. + */ +void dwc_otg_hc_halt(dwc_otg_core_if_t * _core_if, + dwc_hc_t * _hc, dwc_otg_halt_status_e _halt_status) +{ + gnptxsts_data_t nptxsts; + hptxsts_data_t hptxsts; + hcchar_data_t hcchar; + dwc_otg_hc_regs_t * hc_regs; + dwc_otg_core_global_regs_t * global_regs; + dwc_otg_host_global_regs_t * host_global_regs; + hc_regs = _core_if->host_if->hc_regs[_hc->hc_num]; + global_regs = _core_if->core_global_regs; + host_global_regs = _core_if->host_if->host_global_regs; + WARN_ON(_halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS); + if (_halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE || + _halt_status == DWC_OTG_HC_XFER_AHB_ERR) { + + /* + * Disable all channel interrupts except Ch Halted. The QTD + * and QH state associated with this transfer has been cleared + * (in the case of URB_DEQUEUE), so the channel needs to be + * shut down carefully to prevent crashes. + */ + hcintmsk_data_t hcintmsk; + hcintmsk.d32 = 0; + hcintmsk.b.chhltd = 1; + dwc_write_reg32(&hc_regs->hcintmsk, hcintmsk.d32); + + /* + * Make sure no other interrupts besides halt are currently + * pending. Handling another interrupt could cause a crash due + * to the QTD and QH state. + */ + dwc_write_reg32(&hc_regs->hcint, ~hcintmsk.d32); + + /* + * Make sure the halt status is set to URB_DEQUEUE or AHB_ERR + * even if the channel was already halted for some other + * reason. + */ + _hc->halt_status = _halt_status; + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + if (hcchar.b.chen == 0) { + /* + * The channel is either already halted or it hasn't + * started yet. In DMA mode, the transfer may halt if + * it finishes normally or a condition occurs that + * requires driver intervention. Don't want to halt + * the channel again. In either Slave or DMA mode, + * it's possible that the transfer has been assigned + * to a channel, but not started yet when an URB is + * dequeued. Don't want to halt a channel that hasn't + * started yet. + */ + return; + } + } + if (_hc->halt_pending) { + + /* + * A halt has already been issued for this channel. This might + * happen when a transfer is aborted by a higher level in + * the stack. + */ +#ifdef CONFIG_DWC_DEBUG + DWC_PRINT("*** %s: Channel %d, _hc->halt_pending already set ***\n", + __func__, _hc->hc_num); +/* dwc_otg_dump_global_registers(_core_if); */ +/* dwc_otg_dump_host_registers(_core_if); */ +#endif /* */ + return; + } + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + hcchar.b.chen = 1; + hcchar.b.chdis = 1; + if (!_core_if->dma_enable) { + /* Check for space in the request queue to issue the halt. */ + if (_hc->ep_type == DWC_OTG_EP_TYPE_CONTROL + || _hc->ep_type == DWC_OTG_EP_TYPE_BULK) { + nptxsts.d32 = dwc_read_reg32(&global_regs->gnptxsts); + if (nptxsts.b.nptxqspcavail == 0) { + hcchar.b.chen = 0; + } + } else { + hptxsts.d32 = dwc_read_reg32(&host_global_regs->hptxsts); + if ((hptxsts.b.ptxqspcavail == 0) || + (_core_if->queuing_high_bandwidth)) { + hcchar.b.chen = 0; + } + } + } + dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); + _hc->halt_status = _halt_status; + if (hcchar.b.chen) { + _hc->halt_pending = 1; + _hc->halt_on_queue = 0; + } else { + _hc->halt_on_queue = 1; + } + DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, _hc->hc_num); + DWC_DEBUGPL(DBG_HCDV, " hcchar: 0x%08x\n", hcchar.d32); + DWC_DEBUGPL(DBG_HCDV, " halt_pending: %d\n", _hc->halt_pending); + DWC_DEBUGPL(DBG_HCDV, " halt_on_queue: %d\n", _hc->halt_on_queue); + DWC_DEBUGPL(DBG_HCDV, " halt_status: %d\n", _hc->halt_status); + return; +} + + +/** + * Clears the transfer state for a host channel. This function is normally + * called after a transfer is done and the host channel is being released. + * + * @param _core_if Programming view of DWC_otg controller. + * @param _hc Identifies the host channel to clean up. + */ +void dwc_otg_hc_cleanup(dwc_otg_core_if_t * _core_if, dwc_hc_t * _hc) +{ + dwc_otg_hc_regs_t * hc_regs; + _hc->xfer_started = 0; + + /* + * Clear channel interrupt enables and any unhandled channel interrupt + * conditions. + */ + hc_regs = _core_if->host_if->hc_regs[_hc->hc_num]; + dwc_write_reg32(&hc_regs->hcintmsk, 0); + dwc_write_reg32(&hc_regs->hcint, 0xFFFFFFFF); + +#ifdef CONFIG_DWC_DEBUG + del_timer(&_core_if->hc_xfer_timer[_hc->hc_num]); + { + hcchar_data_t hcchar; + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + if (hcchar.b.chdis) { + DWC_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n", + __func__, _hc->hc_num, hcchar.d32); + } + } +#endif /* */ +} + + +/** + * Sets the channel property that indicates in which frame a periodic transfer + * should occur. This is always set to the _next_ frame. This function has no + * effect on non-periodic transfers. + * + * @param _core_if Programming view of DWC_otg controller. + * @param _hc Identifies the host channel to set up and its properties. + * @param _hcchar Current value of the HCCHAR register for the specified host + * channel. + */ +static inline void hc_set_even_odd_frame(dwc_otg_core_if_t * _core_if, + dwc_hc_t * _hc, hcchar_data_t * _hcchar) +{ + if (_hc->ep_type == DWC_OTG_EP_TYPE_INTR || + _hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { + hfnum_data_t hfnum; + hfnum.d32 = dwc_read_reg32(&_core_if->host_if->host_global_regs->hfnum); + + /* 1 if _next_ frame is odd, 0 if it's even */ + _hcchar->b.oddfrm = (hfnum.b.frnum & 0x1) ? 0 : 1; + +#ifdef CONFIG_DWC_DEBUG + if (_hc->ep_type == DWC_OTG_EP_TYPE_INTR && _hc->do_split + && !_hc->complete_split) { + switch (hfnum.b.frnum & 0x7) { + case 7: + _core_if->hfnum_7_samples++; + _core_if->hfnum_7_frrem_accum += hfnum.b.frrem; + break; + case 0: + _core_if->hfnum_0_samples++; + _core_if->hfnum_0_frrem_accum += hfnum.b.frrem; + break; + default: + _core_if->hfnum_other_samples++; + _core_if->hfnum_other_frrem_accum += + hfnum.b.frrem; + break; + } + } +#endif /* */ + } +} + +#ifdef CONFIG_DWC_DEBUG +static void hc_xfer_timeout(unsigned long _ptr) +{ + hc_xfer_info_t * xfer_info = (hc_xfer_info_t *) _ptr; + int hc_num = xfer_info->hc->hc_num; + DWC_WARN("%s: timeout on channel %d\n", __func__, hc_num); + DWC_WARN(" start_hcchar_val 0x%08x\n", + xfer_info->core_if->start_hcchar_val[hc_num]); +} +#endif /* */ + +/* + * This function does the setup for a data transfer for a host channel and + * starts the transfer. May be called in either Slave mode or DMA mode. In + * Slave mode, the caller must ensure that there is sufficient space in the + * request queue and Tx Data FIFO. + * + * For an OUT transfer in Slave mode, it loads a data packet into the + * appropriate FIFO. If necessary, additional data packets will be loaded in + * the Host ISR. + * + * For an IN transfer in Slave mode, a data packet is requested. The data + * packets are unloaded from the Rx FIFO in the Host ISR. If necessary, + * additional data packets are requested in the Host ISR. + * + * For a PING transfer in Slave mode, the Do Ping bit is set in the HCTSIZ + * register along with a packet count of 1 and the channel is enabled. This + * causes a single PING transaction to occur. Other fields in HCTSIZ are + * simply set to 0 since no data transfer occurs in this case. + * + * For a PING transfer in DMA mode, the HCTSIZ register is initialized with + * all the information required to perform the subsequent data transfer. In + * addition, the Do Ping bit is set in the HCTSIZ register. In this case, the + * controller performs the entire PING protocol, then starts the data + * transfer. + * + * @param _core_if Programming view of DWC_otg controller. + * @param _hc Information needed to initialize the host channel. The xfer_len + * value may be reduced to accommodate the max widths of the XferSize and + * PktCnt fields in the HCTSIZn register. The multi_count value may be changed + * to reflect the final xfer_len value. + */ +void dwc_otg_hc_start_transfer(dwc_otg_core_if_t * _core_if, dwc_hc_t * _hc) +{ + hcchar_data_t hcchar; + hctsiz_data_t hctsiz; + uint16_t num_packets; + uint32_t max_hc_xfer_size = _core_if->core_params->max_transfer_size; + uint16_t max_hc_pkt_count = _core_if->core_params->max_packet_count; + dwc_otg_hc_regs_t * hc_regs = _core_if->host_if->hc_regs[_hc->hc_num]; + hctsiz.d32 = 0; + if (_hc->do_ping) { + if (!_core_if->dma_enable) { + dwc_otg_hc_do_ping(_core_if, _hc); + _hc->xfer_started = 1; + return; + } else { + hctsiz.b.dopng = 1; + } + } + if (_hc->do_split) { + num_packets = 1; + if (_hc->complete_split && !_hc->ep_is_in) { + /* For CSPLIT OUT Transfer, set the size to 0 so the + * core doesn't expect any data written to the FIFO */ + _hc->xfer_len = 0; + } else if (_hc->ep_is_in || (_hc->xfer_len > _hc->max_packet)) { + _hc->xfer_len = _hc->max_packet; + } else if (!_hc->ep_is_in && (_hc->xfer_len > 188)) { + _hc->xfer_len = 188; + } + hctsiz.b.xfersize = _hc->xfer_len; + } else { + /* + * Ensure that the transfer length and packet count will fit + * in the widths allocated for them in the HCTSIZn register. + */ + if (_hc->ep_type == DWC_OTG_EP_TYPE_INTR + || _hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { + /* + * Make sure the transfer size is no larger than one + * (micro)frame's worth of data. (A check was done + * when the periodic transfer was accepted to ensure + * that a (micro)frame's worth of data can be + * programmed into a channel.) + */ + uint32_t max_periodic_len = _hc->multi_count * _hc->max_packet; + if (_hc->xfer_len > max_periodic_len) { + _hc->xfer_len = max_periodic_len; + } else { + } + } else if (_hc->xfer_len > max_hc_xfer_size) { + /* Make sure that xfer_len is a multiple of max packet size. */ + _hc->xfer_len = max_hc_xfer_size - _hc->max_packet + 1; + } + if (_hc->xfer_len > 0) { + num_packets = (_hc->xfer_len + _hc->max_packet - 1) / _hc->max_packet; + if (num_packets > max_hc_pkt_count) { + num_packets = max_hc_pkt_count; + _hc->xfer_len = num_packets * _hc->max_packet; + } + } else { + /* Need 1 packet for transfer length of 0. */ + num_packets = 1; + } + if (_hc->ep_is_in) { + /* Always program an integral # of max packets for IN transfers. */ + _hc->xfer_len = num_packets * _hc->max_packet; + } + if (_hc->ep_type == DWC_OTG_EP_TYPE_INTR + || _hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { + /* + * Make sure that the multi_count field matches the + * actual transfer length. + */ + _hc->multi_count = num_packets; + } + if (_hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { + /* Set up the initial PID for the transfer. */ + if (_hc->speed == DWC_OTG_EP_SPEED_HIGH) { + if (_hc->ep_is_in) { + if (_hc->multi_count == 1) { + _hc->data_pid_start = + DWC_OTG_HC_PID_DATA0; + } else if (_hc->multi_count == 2) { + _hc->data_pid_start = + DWC_OTG_HC_PID_DATA1; + } else { + _hc->data_pid_start = + DWC_OTG_HC_PID_DATA2; + } + } else { + if (_hc->multi_count == 1) { + _hc->data_pid_start = + DWC_OTG_HC_PID_DATA0; + } else { + _hc->data_pid_start = + DWC_OTG_HC_PID_MDATA; + } + } + } else { + _hc->data_pid_start = DWC_OTG_HC_PID_DATA0; + } + } + hctsiz.b.xfersize = _hc->xfer_len; + } + _hc->start_pkt_count = num_packets; + hctsiz.b.pktcnt = num_packets; + hctsiz.b.pid = _hc->data_pid_start; + dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32); + DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, _hc->hc_num); + DWC_DEBUGPL(DBG_HCDV, " Xfer Size: %d\n", hctsiz.b.xfersize); + DWC_DEBUGPL(DBG_HCDV, " Num Pkts: %d\n", hctsiz.b.pktcnt); + DWC_DEBUGPL(DBG_HCDV, " Start PID: %d\n", hctsiz.b.pid); + if (_core_if->dma_enable) { + dwc_write_reg32(&hc_regs->hcdma, (uint32_t) _hc->xfer_buff); + } + + /* Start the split */ + if (_hc->do_split) { + hcsplt_data_t hcsplt; + hcsplt.d32 = dwc_read_reg32(&hc_regs->hcsplt); + hcsplt.b.spltena = 1; + dwc_write_reg32(&hc_regs->hcsplt, hcsplt.d32); + } + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + hcchar.b.multicnt = _hc->multi_count; + hc_set_even_odd_frame(_core_if, _hc, &hcchar); + +#ifdef CONFIG_DWC_DEBUG + _core_if->start_hcchar_val[_hc->hc_num] = hcchar.d32; + if (hcchar.b.chdis) { + DWC_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n", + __func__, _hc->hc_num, hcchar.d32); + } + +#endif /* */ + + /* Set host channel enable after all other setup is complete. */ + hcchar.b.chen = 1; + hcchar.b.chdis = 0; + dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); + _hc->xfer_started = 1; + _hc->requests++; + if (!_core_if->dma_enable && !_hc->ep_is_in && _hc->xfer_len > 0) { + /* Load OUT packet into the appropriate Tx FIFO. */ + dwc_otg_hc_write_packet(_core_if, _hc); + } + +#ifdef CONFIG_DWC_DEBUG + /* Start a timer for this transfer. */ + _core_if->hc_xfer_timer[_hc->hc_num].function = hc_xfer_timeout; + _core_if->hc_xfer_info[_hc->hc_num].core_if = _core_if; + _core_if->hc_xfer_info[_hc->hc_num].hc = _hc; + _core_if->hc_xfer_timer[_hc->hc_num].data = + (unsigned long)(&_core_if->hc_xfer_info[_hc->hc_num]); + _core_if->hc_xfer_timer[_hc->hc_num].expires = jiffies + (HZ * 10); + add_timer(&_core_if->hc_xfer_timer[_hc->hc_num]); +#endif /* */ +} + +/** + * This function continues a data transfer that was started by previous call + * to <code>dwc_otg_hc_start_transfer</code>. The caller must ensure there is + * sufficient space in the request queue and Tx Data FIFO. This function + * should only be called in Slave mode. In DMA mode, the controller acts + * autonomously to complete transfers programmed to a host channel. + * + * For an OUT transfer, a new data packet is loaded into the appropriate FIFO + * if there is any data remaining to be queued. For an IN transfer, another + * data packet is always requested. For the SETUP phase of a control transfer, + * this function does nothing. + * + * @return 1 if a new request is queued, 0 if no more requests are required + * for this transfer. + */ +int dwc_otg_hc_continue_transfer(dwc_otg_core_if_t * _core_if, dwc_hc_t * _hc) +{ + DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, _hc->hc_num); + if (_hc->do_split) { + /* SPLITs always queue just once per channel */ + return 0; + } else if (_hc->data_pid_start == DWC_OTG_HC_PID_SETUP) { + /* SETUPs are queued only once since they can't be NAKed. */ + return 0; + } else if (_hc->ep_is_in) { + /* + * Always queue another request for other IN transfers. If + * back-to-back INs are issued and NAKs are received for both, + * the driver may still be processing the first NAK when the + * second NAK is received. When the interrupt handler clears + * the NAK interrupt for the first NAK, the second NAK will + * not be seen. So we can't depend on the NAK interrupt + * handler to requeue a NAKed request. Instead, IN requests + * are issued each time this function is called. When the + * transfer completes, the extra requests for the channel will + * be flushed. + */ + hcchar_data_t hcchar; + dwc_otg_hc_regs_t * hc_regs = _core_if->host_if->hc_regs[_hc->hc_num]; + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + hc_set_even_odd_frame(_core_if, _hc, &hcchar); + hcchar.b.chen = 1; + hcchar.b.chdis = 0; + DWC_DEBUGPL(DBG_HCDV, " IN xfer: hcchar = 0x%08x\n", hcchar.d32); + dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); + _hc->requests++; + return 1; + } else { + /* OUT transfers. */ + if (_hc->xfer_count < _hc->xfer_len) { + if (_hc->ep_type == DWC_OTG_EP_TYPE_INTR || + _hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { + hcchar_data_t hcchar; + dwc_otg_hc_regs_t * hc_regs; + hc_regs = _core_if->host_if->hc_regs[_hc->hc_num]; + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + hc_set_even_odd_frame(_core_if, _hc, &hcchar); + } + + /* Load OUT packet into the appropriate Tx FIFO. */ + dwc_otg_hc_write_packet(_core_if, _hc); + _hc->requests++; + return 1; + } else { + return 0; + } + } +} + +/** + * Starts a PING transfer. This function should only be called in Slave mode. + * The Do Ping bit is set in the HCTSIZ register, then the channel is enabled. + */ +void dwc_otg_hc_do_ping(dwc_otg_core_if_t * _core_if, dwc_hc_t * _hc) +{ + hcchar_data_t hcchar; + hctsiz_data_t hctsiz; + dwc_otg_hc_regs_t * hc_regs = _core_if->host_if->hc_regs[_hc->hc_num]; + DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, _hc->hc_num); + hctsiz.d32 = 0; + hctsiz.b.dopng = 1; + hctsiz.b.pktcnt = 1; + dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32); + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + hcchar.b.chen = 1; + hcchar.b.chdis = 0; + dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); +} + + +#ifdef CONFIG_OTG_PLB_DMA /* PPC_PLB_DMA mode */ +/* + * This will dump the status of the dma registers - + * Only used in debug mode + */ +void ppc4xx_dump_dma(unsigned int dmanr) +{ + int index; + + printk("%32s:\n", __FUNCTION__); + for (index=0; index<=7; index++) { + printk("%32s dmanr=%d , 0x%x=0x%x\n",__FUNCTION__, dmanr , + DCRN_DMACR0 + dmanr*8+index, mfdcr(DCRN_DMACR0 + dmanr*8 + index)); + } + printk("%32s DCRN_DMASR=0x%x\n", __FUNCTION__, mfdcr(DCRN_DMASR)); +} + +/* + * This function programs the PLB-DMA engine to perform MEM-MEM transfer + * This is used to RD & WR from the DWC_FIFO by the PLB_DMA engine + */ +void ppc4xx_start_plb_dma(dwc_otg_core_if_t *_core_if, void *src, void *dst, unsigned int length, + unsigned int use_interrupt, unsigned int dma_ch, unsigned int dma_dir) +{ + int res = 0; + unsigned int control; + ppc_dma_ch_t p_init; + + memset((char *)&p_init, sizeof(p_init), 0); + p_init.polarity = 0; + p_init.pwidth = PW_32; + p_init.in_use = 0; + if ( dma_dir == OTG_TX_DMA) { + p_init.sai = 1; + p_init.dai = 0; + } else if (dma_dir == OTG_RX_DMA) { + p_init.sai = 0; + p_init.dai = 1; + } + res = ppc4xx_init_dma_channel(dma_ch, &p_init); + if (res) { + printk("%32s: nit_dma_channel return %d %d bytes dest %p\n", + __FUNCTION__, res, length, dst); + } + res = ppc4xx_clr_dma_status(dma_ch); + if (res) { + printk("%32s: ppc4xx_clr_dma_status %d\n", __FUNCTION__, res); + } + + if (dma_dir == OTG_TX_DMA) { + ppc4xx_set_src_addr(dma_ch, virt_to_bus (src)); + ppc4xx_set_dst_addr(dma_ch, (_core_if->phys_addr + + (dst - (void *)(_core_if->core_global_regs))) ); + } else if (dma_dir == OTG_RX_DMA) { + ppc4xx_set_src_addr(dma_ch, (_core_if->phys_addr + + (src - (void *)(_core_if->core_global_regs))) ); + ppc4xx_set_dst_addr(dma_ch, virt_to_bus (dst)); + } + + ppc4xx_set_dma_mode(dma_ch, DMA_MODE_MM); + ppc4xx_set_dma_count(dma_ch, length); + + /* flush cache before enabling DMA transfer */ + if (dma_dir == OTG_TX_DMA) { + flush_dcache_range((unsigned long)src, + (unsigned long)(src + length)); + } else if (dma_dir == OTG_RX_DMA) { + flush_dcache_range((unsigned long)dst, + (unsigned long)(dst + length)); + } + + if (use_interrupt) { + res = ppc4xx_enable_dma_interrupt(dma_ch); + } else { + res = ppc4xx_disable_dma_interrupt(dma_ch); + } + if (res) { + printk("%32s: en/disable_dma_interrupt %d return %d per %d\n", + __FUNCTION__, use_interrupt, res, + ppc4xx_get_peripheral_width(dma_ch)); + } + + control = mfdcr(DCRN_DMACR0 + (dma_ch * 8)); + + control &= ~(SET_DMA_BEN(1)); + control &= ~(SET_DMA_PSC(3)); + control &= ~(SET_DMA_PWC(0x3f)); + control &= ~(SET_DMA_PHC(0x7)); + control &= ~(SET_DMA_PL(1)); + + mtdcr(DCRN_DMACR0 + (dma_ch * 8), control); + +#ifdef OTG_PLB_DMA_DBG + ppc4xx_dump_dma(dma_ch); +#endif + ppc4xx_enable_dma(dma_ch); +} +#endif + +/* + * This function writes a packet into the Tx FIFO associated with the Host + * Channel. For a channel associated with a non-periodic EP, the non-periodic + * Tx FIFO is written. For a channel associated with a periodic EP, the + * periodic Tx FIFO is written. This function should only be called in Slave + * mode. + * + * Upon return the xfer_buff and xfer_count fields in _hc are incremented by + * then number of bytes written to the Tx FIFO. + */ +void dwc_otg_hc_write_packet(dwc_otg_core_if_t * _core_if, dwc_hc_t * _hc) +{ +#ifndef CONFIG_OTG_PLB_DMA + uint32_t i; +#endif + uint32_t remaining_count; + uint32_t byte_count; + uint32_t dword_count; + uint32_t * data_buff = (uint32_t *) (_hc->xfer_buff); + uint32_t * data_fifo = _core_if->data_fifo[_hc->hc_num]; +#if !defined( CONFIG_OTG_PLB_DMA_TASKLET) && defined(CONFIG_OTG_PLB_DMA) + uint32_t dma_sts = 0; +#endif + remaining_count = _hc->xfer_len - _hc->xfer_count; + if (remaining_count > _hc->max_packet) { + byte_count = _hc->max_packet; + } else { + byte_count = remaining_count; + } + dword_count = (byte_count + 3) / 4; + +#ifdef CONFIG_OTG_PLB_DMA +#ifdef CONFIG_OTG_PLB_DMA_TASKLET + + if ( _hc->xfer_len < USB_BUFSIZ) { + int i; + if ((((unsigned long)data_buff) & 0x3) == 0) { + /* xfer_buff is DWORD aligned. */ + for (i = 0; i < dword_count; i++, data_buff++) { + dwc_write_datafifo32(data_fifo, *data_buff); + } + } else { + /* xfer_buff is not DWORD aligned. */ + for (i = 0; i < dword_count; i++, data_buff++) { + dwc_write_datafifo32(data_fifo, get_unaligned(data_buff)); + } + } + } else { + DWC_DEBUGPL(DBG_SP, "%s set release_later %d\n", __func__, dword_count); + atomic_set(& release_later, 1); + //disable_irq_nosync(94); + dwc_otg_disable_global_interrupts(_core_if); + + _core_if->dma_xfer.dma_data_buff = data_buff; + _core_if->dma_xfer.dma_data_fifo = (void *)data_fifo; + _core_if->dma_xfer.dma_count = dword_count; + _core_if->dma_xfer.dma_dir = OTG_TX_DMA; + tasklet_schedule(_core_if->plbdma_tasklet); + } +#else /* !CONFIG_OTG_PLB_DMA_TASKLET */ + if ((((unsigned long)data_buff) & 0x3) == 0) { + /* call tx_dma - src,dest,len,intr */ + ppc4xx_start_plb_dma(_core_if, (void *)data_buff, data_fifo, + (dword_count * 4), PLB_DMA_INT_DIS, PLB_DMA_CH, OTG_TX_DMA); + } else { + ppc4xx_start_plb_dma(_core_if, (void *)get_unaligned(data_buff), + data_fifo, (dword_count * 4), PLB_DMA_INT_DIS, PLB_DMA_CH, OTG_TX_DMA); + } + + while (mfdcr(DCRN_DMACR0 + (PLB_DMA_CH*8)) & DMA_CE_ENABLE) { + } + dma_sts = (uint32_t)ppc4xx_get_dma_status(); +#ifdef OTG_PLB_DMA_DBG + if (!(dma_sts & DMA_CS0)) { + printk("Status (Terminal Count not occured) 0x%08x\n", mfdcr(DCRN_DMASR)); + } +#endif + if (dma_sts & DMA_CH0_ERR) { + printk("Status (Channel Error) 0x%08x\n", mfdcr(DCRN_DMASR)); + } + ppc4xx_clr_dma_status(PLB_DMA_CH); +#ifdef OTG_PLB_DMA_DBG + printk("%32s DMA Status =0x%08x\n", __FUNCTION__, mfdcr(DCRN_DMASR)); /* vj_dbg */ +#endif + +#endif /* CONFIG_OTG_PLB_DMA_TASKLET */ + + +#else + if ((((unsigned long)data_buff) & 0x3) == 0) { + /* xfer_buff is DWORD aligned. */ + for (i = 0; i < dword_count; i++, data_buff++) { + dwc_write_datafifo32(data_fifo, *data_buff); + } + } else { + /* xfer_buff is not DWORD aligned. */ + for (i = 0; i < dword_count; i++, data_buff++) { + dwc_write_datafifo32(data_fifo, get_unaligned(data_buff)); + } + } +#endif + _hc->xfer_count += byte_count; + _hc->xfer_buff += byte_count; +} + +/** + * Gets the current USB frame number. This is the frame number from the last + * SOF packet. + */ +uint32_t dwc_otg_get_frame_number(dwc_otg_core_if_t * _core_if) +{ + dsts_data_t dsts; + dsts.d32 = dwc_read_reg32(&_core_if->dev_if->dev_global_regs->dsts); + /* read current frame/microfreme number from DSTS register */ + return dsts.b.soffn; +} + + +/** + * This function reads a setup packet from the Rx FIFO into the destination + * buffer. This function is called from the Rx Status Queue Level (RxStsQLvl) + * Interrupt routine when a SETUP packet has been received in Slave mode. + * + * @param _core_if Programming view of DWC_otg controller. + * @param _dest Destination buffer for packet data. + */ +void dwc_otg_read_setup_packet(dwc_otg_core_if_t * _core_if, uint32_t * _dest) +{ + /* Get the 8 bytes of a setup transaction data */ + + /* Pop 2 DWORDS off the receive data FIFO into memory */ + _dest[0] = dwc_read_datafifo32(_core_if->data_fifo[0]); + _dest[1] = dwc_read_datafifo32(_core_if->data_fifo[0]); +} + +/** + * This function enables EP0 OUT to receive SETUP packets and configures EP0 + * IN for transmitting packets. It is normally called when the + * "Enumeration Done" interrupt occurs. + * + * @param _core_if Programming view of DWC_otg controller. + * @param _ep The EP0 data. + */ +void dwc_otg_ep0_activate(dwc_otg_core_if_t * _core_if, dwc_ep_t * _ep) +{ + dwc_otg_dev_if_t * dev_if = _core_if->dev_if; + dsts_data_t dsts; + depctl_data_t diepctl; + depctl_data_t doepctl; + dctl_data_t dctl = {.d32 = 0}; + + /* Read the Device Status and Endpoint 0 Control registers */ + dsts.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dsts); + diepctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[0]->diepctl); + doepctl.d32 = dwc_read_reg32(&dev_if->out_ep_regs[0]->doepctl); + + /* Set the MPS of the IN EP based on the enumeration speed */ + switch (dsts.b.enumspd) { + case DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ: + case DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ: + case DWC_DSTS_ENUMSPD_FS_PHY_48MHZ: + diepctl.b.mps = DWC_DEP0CTL_MPS_64; + break; + case DWC_DSTS_ENUMSPD_LS_PHY_6MHZ: + diepctl.b.mps = DWC_DEP0CTL_MPS_8; + break; + } + dwc_write_reg32(&dev_if->in_ep_regs[0]->diepctl, diepctl.d32); + + /* Enable OUT EP for receive */ + doepctl.b.epena = 1; + dwc_write_reg32(&dev_if->out_ep_regs[0]->doepctl, doepctl.d32); + +#ifdef VERBOSE + DWC_DEBUGPL(DBG_PCDV, "doepctl0=%0x\n", + dwc_read_reg32(&dev_if->out_ep_regs[0]->doepctl)); + DWC_DEBUGPL(DBG_PCDV, "diepctl0=%0x\n", + dwc_read_reg32(&dev_if->in_ep_regs[0]->diepctl)); + +#endif /* */ + dctl.b.cgnpinnak = 1; + dwc_modify_reg32(&dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32); + DWC_DEBUGPL(DBG_PCDV, "dctl=%0x\n", + dwc_read_reg32(&dev_if->dev_global_regs->dctl)); +} + + +/** + * This function activates an EP. The Device EP control register for + * the EP is configured as defined in the ep structure. Note: This + * function is not used for EP0. + * + * @param _core_if Programming view of DWC_otg controller. + * @param _ep The EP to activate. + */ +void dwc_otg_ep_activate(dwc_otg_core_if_t * _core_if, dwc_ep_t * _ep) +{ + dwc_otg_dev_if_t * dev_if = _core_if->dev_if; + depctl_data_t depctl; + volatile uint32_t *addr; + daint_data_t daintmsk = {.d32 = 0}; + DWC_DEBUGPL(DBG_PCDV, "%s() EP%d-%s\n", __func__, _ep->num, + (_ep->is_in ? "IN" : "OUT")); + + /* Read DEPCTLn register */ + if (_ep->is_in == 1) { + addr = &dev_if->in_ep_regs[_ep->num]->diepctl; + daintmsk.ep.in = 1 << _ep->num; + } else { + addr = &dev_if->out_ep_regs[_ep->num]->doepctl; + daintmsk.ep.out = 1 << _ep->num; + } + + /* If the EP is already active don't change the EP Control + * register. + */ + depctl.d32 = dwc_read_reg32(addr); + if (!depctl.b.usbactep) { + depctl.b.mps = _ep->maxpacket; + depctl.b.eptype = _ep->type; + depctl.b.txfnum = _ep->tx_fifo_num; + if (_ep->type == DWC_OTG_EP_TYPE_ISOC) { + depctl.b.setd0pid = 1; // ??? + } else { + depctl.b.setd0pid = 1; + } + depctl.b.usbactep = 1; + dwc_write_reg32(addr, depctl.d32); + DWC_DEBUGPL(DBG_PCDV, "DEPCTL=%08x\n", dwc_read_reg32(addr)); + } + + /* Enable the Interrupt for this EP */ + dwc_modify_reg32(&dev_if->dev_global_regs->daintmsk, 0, + daintmsk.d32); + DWC_DEBUGPL(DBG_PCDV, "DAINTMSK=%0x\n", + dwc_read_reg32(&dev_if->dev_global_regs->daintmsk)); + _ep->stall_clear_flag = 0; + return; +} + + +/** + * This function deactivates an EP. This is done by clearing the USB Active + * EP bit in the Device EP control register. Note: This function is not used + * for EP0. EP0 cannot be deactivated. + * + * @param _core_if Programming view of DWC_otg controller. + * @param _ep The EP to deactivate. + */ +void dwc_otg_ep_deactivate(dwc_otg_core_if_t * _core_if, dwc_ep_t * _ep) +{ + depctl_data_t depctl = {.d32 = 0}; + volatile uint32_t *addr; + daint_data_t daintmsk = {.d32 = 0}; + + /* Read DEPCTLn register */ + if (_ep->is_in == 1) { + addr = &_core_if->dev_if->in_ep_regs[_ep->num]->diepctl; + daintmsk.ep.in = 1 << _ep->num; + } else { + addr = &_core_if->dev_if->out_ep_regs[_ep->num]->doepctl; + daintmsk.ep.out = 1 << _ep->num; + } + depctl.b.usbactep = 0; + dwc_write_reg32(addr, depctl.d32); + + /* Disable the Interrupt for this EP */ + dwc_modify_reg32(&_core_if->dev_if->dev_global_regs->daintmsk, + daintmsk.d32, 0); + return; +} + + +/** + * This function does the setup for a data transfer for an EP and + * starts the transfer. For an IN transfer, the packets will be + * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers, + * the packets are unloaded from the Rx FIFO in the ISR. the ISR. + * + * @param _core_if Programming view of DWC_otg controller. + * @param _ep The EP to start the transfer on. + */ +void dwc_otg_ep_start_transfer(dwc_otg_core_if_t * _core_if, dwc_ep_t * _ep) +{ + /** @todo Refactor this funciton to check the transfer size + * count value does not execed the number bits in the Transfer + * count register. */ + depctl_data_t depctl; + deptsiz_data_t deptsiz; + gintmsk_data_t intr_mask = {.d32 = 0}; + +#ifdef CHECK_PACKET_COUNTER_WIDTH + const uint32_t MAX_XFER_SIZE = _core_if->core_params->max_transfer_size; + const uint32_t MAX_PKT_COUNT = _core_if->core_params->max_packet_count; + uint32_t num_packets; + uint32_t transfer_len; + dwc_otg_dev_out_ep_regs_t * out_regs = _core_if->dev_if->out_ep_regs[_ep->num]; + dwc_otg_dev_in_ep_regs_t * in_regs = _core_if->dev_if->in_ep_regs[_ep->num]; + gnptxsts_data_t txstatus; + int lvl = SET_DEBUG_LEVEL(DBG_PCD); + DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d " + "xfer_buff=%p start_xfer_buff=%p\n", _ep->num, + (_ep->is_in ? "IN" : "OUT"), _ep->xfer_len, + _ep->xfer_count, _ep->xfer_buff, _ep->start_xfer_buff); + transfer_len = _ep->xfer_len - _ep->xfer_count; + if (transfer_len > MAX_XFER_SIZE) { + transfer_len = MAX_XFER_SIZE; + } + if (transfer_len == 0) { + num_packets = 1; + + /* OUT EP to recieve Zero-length packet set transfer + * size to maxpacket size. */ + if (!_ep->is_in) { + transfer_len = _ep->maxpacket; + } + } else { + num_packets = (transfer_len + _ep->maxpacket - 1) / _ep->maxpacket; + if (num_packets > MAX_PKT_COUNT) { + num_packets = MAX_PKT_COUNT; + } + } + DWC_DEBUGPL(DBG_PCD, "transfer_len=%d #pckt=%d\n", transfer_len, + num_packets); + deptsiz.b.xfersize = transfer_len; + deptsiz.b.pktcnt = num_packets; + + /* IN endpoint */ + if (_ep->is_in == 1) { + depctl.d32 = dwc_read_reg32(&in_regs->diepctl); + } /* OUT endpoint */ + else { + depctl.d32 = dwc_read_reg32(&out_regs->doepctl); + } + + /* EP enable, IN data in FIFO */ + depctl.b.cnak = 1; + depctl.b.epena = 1; + + /* IN endpoint */ + if (_ep->is_in == 1) { + txstatus.d32 = dwc_read_reg32(&_core_if->core_global_regs->gnptxsts); + if (txstatus.b.nptxqspcavail == 0) { + DWC_DEBUGPL(DBG_ANY, "TX Queue Full (0x%0x)\n", + txstatus.d32); + return; + } + dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32); + dwc_write_reg32(&in_regs->diepctl, depctl.d32); + + /** + * Enable the Non-Periodic Tx FIFO empty interrupt, the + * data will be written into the fifo by the ISR. + */ + if (_core_if->dma_enable) { + dwc_write_reg32(&in_regs->diepdma, (uint32_t) _ep->xfer_buff); + } else { + if (_core_if->en_multiple_tx_fifo == 0) { + intr_mask.b.nptxfempty = 1; + dwc_modify_reg32(&_core_if->core_global_regs->gintsts, + intr_mask.d32, 0); + dwc_modify_reg32(&_core_if->core_global_regs->gintmsk, + intr_mask.d32,intr_mask.d32); + } else { + /* Enable the Tx FIFO Empty Interrupt for this EP */ + if (_ep->xfer_len > 0 && + _ep->type != DWC_OTG_EP_TYPE_ISOC) { + uint32_t fifoemptymsk = 0; + fifoemptymsk = (0x1 << _ep->num); + dwc_modify_reg32(&_core_if->dev_if->dev_global_regs-> + dtknqr4_fifoemptymsk,0, fifoemptymsk); + } + } + } + } else { + /* OUT endpoint */ + dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32); + dwc_write_reg32(&out_regs->doepctl, depctl.d32); + if (_core_if->dma_enable) { + dwc_write_reg32(&out_regs->doepdma,(uint32_t) _ep->xfer_buff); + } + } + DWC_DEBUGPL(DBG_PCD, "DOEPCTL=%08x DOEPTSIZ=%08x\n", + dwc_read_reg32(&out_regs->doepctl), + dwc_read_reg32(&out_regs->doeptsiz)); + DWC_DEBUGPL(DBG_PCD, "DAINTMSK=%08x GINTMSK=%08x\n", + dwc_read_reg32(&_core_if->dev_if->dev_global_regs->daintmsk), + dwc_read_reg32(&_core_if->core_global_regs->gintmsk)); + SET_DEBUG_LEVEL(lvl); + +#endif /* */ + DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s()\n", __func__); + DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d " + "xfer_buff=%p start_xfer_buff=%p\n", _ep->num, + (_ep->is_in ? "IN" : "OUT"), _ep->xfer_len, + _ep->xfer_count, _ep->xfer_buff, _ep->start_xfer_buff); + + /* IN endpoint */ + if (_ep->is_in == 1) { + dwc_otg_dev_in_ep_regs_t * in_regs = _core_if->dev_if->in_ep_regs[_ep->num]; + gnptxsts_data_t gtxstatus; + gtxstatus.d32 = dwc_read_reg32(&_core_if->core_global_regs->gnptxsts); + if (_core_if->en_multiple_tx_fifo == 0 && + gtxstatus.b.nptxqspcavail == 0) { +#ifdef CONFIG_DWC_DEBUG + DWC_PRINT("TX Queue Full (0x%0x)\n", gtxstatus.d32); +#endif /* */ + return; + } + depctl.d32 = dwc_read_reg32(&(in_regs->diepctl)); + deptsiz.d32 = dwc_read_reg32(&(in_regs->dieptsiz)); + + /* Zero Length Packet? */ + if (_ep->xfer_len == 0) { + deptsiz.b.xfersize = 0; + deptsiz.b.pktcnt = 1; + } else { + /* Program the transfer size and packet count + * as follows: xfersize = N * maxpacket + + * short_packet pktcnt = N + (short_packet + * exist ? 1 : 0) + */ + +#ifdef CONFIG_405EZ + /* + * Added-sr: 2007-07-26 + * + * Since the 405EZ (Ultra) only support 2047 bytes as + * max transfer size, we have to split up bigger transfers + * into multiple transfers of 1024 bytes sized messages. + * I happens often, that transfers of 4096 bytes are + * required (zero-gadget, file_storage-gadget). + */ + if (_ep->xfer_len > MAX_XFER_LEN) { + _ep->bytes_pending = _ep->xfer_len - MAX_XFER_LEN; + _ep->xfer_len = MAX_XFER_LEN; + } +#endif + + deptsiz.b.xfersize = _ep->xfer_len; + deptsiz.b.pktcnt = (_ep->xfer_len - 1 + _ep->maxpacket) / _ep->maxpacket; + } + dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32); + + /* Write the DMA register */ + if (_core_if->dma_enable) { + dwc_write_reg32(&(in_regs->diepdma), (uint32_t) _ep->dma_addr); + } else { + if (_ep->type != DWC_OTG_EP_TYPE_ISOC) { + /** + * Enable the Non-Periodic Tx FIFO empty interrupt, + * or the Tx FIFO epmty interrupt in dedicated Tx FIFO mode, + * the data will be written into the fifo by the ISR. + */ + if (_core_if->en_multiple_tx_fifo == 0) { + intr_mask.b.nptxfempty = 1; + dwc_modify_reg32(&_core_if->core_global_regs->gintsts, + intr_mask.d32, 0); + dwc_modify_reg32(&_core_if->core_global_regs->gintmsk, + intr_mask.d32, intr_mask.d32); + } else { + /* Enable the Tx FIFO Empty Interrupt for this EP */ + if (_ep->xfer_len > 0) { + uint32_t fifoemptymsk = 0; + fifoemptymsk = 1 << _ep->num; + dwc_modify_reg32(&_core_if->dev_if->dev_global_regs-> + dtknqr4_fifoemptymsk,0,fifoemptymsk); + } + } + } + } + + /* EP enable, IN data in FIFO */ + depctl.b.cnak = 1; + depctl.b.epena = 1; + dwc_write_reg32(&in_regs->diepctl, depctl.d32); + if (_core_if->dma_enable) { + depctl.d32 = dwc_read_reg32(&_core_if->dev_if->in_ep_regs[0]->diepctl); + depctl.b.nextep = _ep->num; + dwc_write_reg32(&_core_if->dev_if->in_ep_regs[0]->diepctl, depctl.d32); + } + } else { + /* OUT endpoint */ + dwc_otg_dev_out_ep_regs_t * out_regs = _core_if->dev_if->out_ep_regs[_ep->num]; + depctl.d32 = dwc_read_reg32(&(out_regs->doepctl)); + deptsiz.d32 = dwc_read_reg32(&(out_regs->doeptsiz)); + + /* Program the transfer size and packet count as follows: + * + * pktcnt = N + * xfersize = N * maxpacket + */ + if (_ep->xfer_len == 0) { + /* Zero Length Packet */ + deptsiz.b.xfersize = _ep->maxpacket; + deptsiz.b.pktcnt = 1; + } else { + deptsiz.b.pktcnt = (_ep->xfer_len + (_ep->maxpacket - 1)) / _ep->maxpacket; + deptsiz.b.xfersize = deptsiz.b.pktcnt * _ep->maxpacket; + } + dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32); + DWC_DEBUGPL(DBG_PCDV, "ep%d xfersize=%d pktcnt=%d\n", + _ep->num, deptsiz.b.xfersize, deptsiz.b.pktcnt); + if (_core_if->dma_enable) { + dwc_write_reg32(&(out_regs->doepdma), + (uint32_t) _ep->dma_addr); + } + if (_ep->type == DWC_OTG_EP_TYPE_ISOC) { + /** @todo NGS: dpid is read-only. Use setd0pid + * or setd1pid. */ + if (_ep->even_odd_frame) { + depctl.b.setd1pid = 1; + } else { + depctl.b.setd0pid = 1; + } + } + + /* EP enable */ + depctl.b.cnak = 1; + depctl.b.epena = 1; + dwc_write_reg32(&out_regs->doepctl, depctl.d32); + DWC_DEBUGPL(DBG_PCD, "DOEPCTL=%08x DOEPTSIZ=%08x\n", + dwc_read_reg32(&out_regs->doepctl), + dwc_read_reg32(&out_regs->doeptsiz)); + DWC_DEBUGPL(DBG_PCD, "DAINTMSK=%08x GINTMSK=%08x\n", + dwc_read_reg32(&_core_if->dev_if->dev_global_regs->daintmsk), + dwc_read_reg32(&_core_if->core_global_regs->gintmsk)); + } +} + +/** + * This function does the setup for a data transfer for EP0 and starts + * the transfer. For an IN transfer, the packets will be loaded into + * the appropriate Tx FIFO in the ISR. For OUT transfers, the packets are + * unloaded from the Rx FIFO in the ISR. + * + * @param _core_if Programming view of DWC_otg controller. + * @param _ep The EP0 data. + */ +void dwc_otg_ep0_start_transfer(dwc_otg_core_if_t * _core_if, dwc_ep_t * _ep) +{ + volatile depctl_data_t depctl; + volatile deptsiz0_data_t deptsiz; + gintmsk_data_t intr_mask = {.d32 = 0}; + DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d " + "xfer_buff=%p start_xfer_buff=%p total_len=%d\n", + _ep->num, (_ep->is_in ? "IN" : "OUT"), _ep->xfer_len, + _ep->xfer_count, _ep->xfer_buff, _ep->start_xfer_buff, + _ep->total_len); + _ep->total_len = _ep->xfer_len; + + /* IN endpoint */ + if (_ep->is_in == 1) { + dwc_otg_dev_in_ep_regs_t * in_regs = _core_if->dev_if->in_ep_regs[0]; + gnptxsts_data_t gtxstatus; + gtxstatus.d32 = dwc_read_reg32(&_core_if->core_global_regs->gnptxsts); + if (_core_if->en_multiple_tx_fifo == 0 && + gtxstatus.b.nptxqspcavail == 0) { +#ifdef CONFIG_DWC_DEBUG + deptsiz.d32 = dwc_read_reg32(&in_regs->dieptsiz); + DWC_DEBUGPL(DBG_PCD, "DIEPCTL0=%0x\n", + dwc_read_reg32(&in_regs->diepctl)); + DWC_DEBUGPL(DBG_PCD, "DIEPTSIZ0=%0x (sz=%d, pcnt=%d)\n", + deptsiz.d32, deptsiz.b.xfersize,deptsiz.b.pktcnt); + DWC_PRINT("TX Queue or FIFO Full (0x%0x)\n", gtxstatus.d32); +#endif /* */ + printk("TX Queue or FIFO Full!!!!\n"); // test-only + return; + } + depctl.d32 = dwc_read_reg32(&in_regs->diepctl); + deptsiz.d32 = dwc_read_reg32(&in_regs->dieptsiz); + + /* Zero Length Packet? */ + if (_ep->xfer_len == 0) { + deptsiz.b.xfersize = 0; + deptsiz.b.pktcnt = 1; + } else { + /* Program the transfer size and packet count + * as follows: xfersize = N * maxpacket + + * short_packet pktcnt = N + (short_packet + * exist ? 1 : 0) + */ + if (_ep->xfer_len > _ep->maxpacket) { + _ep->xfer_len = _ep->maxpacket; + deptsiz.b.xfersize = _ep->maxpacket; + } else { + deptsiz.b.xfersize = _ep->xfer_len; + } + deptsiz.b.pktcnt = 1; + } + dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32); + DWC_DEBUGPL(DBG_PCDV,"IN len=%d xfersize=%d pktcnt=%d [%08x]\n", + _ep->xfer_len, deptsiz.b.xfersize,deptsiz.b.pktcnt, deptsiz.d32); + + /* Write the DMA register */ + if (_core_if->dma_enable) { + dwc_write_reg32(&(in_regs->diepdma), (uint32_t) _ep->dma_addr); + } + + /* EP enable, IN data in FIFO */ + depctl.b.cnak = 1; + depctl.b.epena = 1; + dwc_write_reg32(&in_regs->diepctl, depctl.d32); + + /** + * Enable the Non-Periodic Tx FIFO empty interrupt, the + * data will be written into the fifo by the ISR. + */ + if (!_core_if->dma_enable) { + if (_core_if->en_multiple_tx_fifo == 0) { + intr_mask.b.nptxfempty = 1; + dwc_modify_reg32(&_core_if->core_global_regs->gintsts, intr_mask.d32, 0); + dwc_modify_reg32(&_core_if->core_global_regs->gintmsk, intr_mask.d32, + intr_mask.d32); + } else { + /* Enable the Tx FIFO Empty Interrupt for this EP */ + if (_ep->xfer_len > 0) { + uint32_t fifoemptymsk = 0; + fifoemptymsk |= 1 << _ep->num; + dwc_modify_reg32(&_core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk, + 0, fifoemptymsk); + } + } + } + } else { + /* OUT endpoint */ + dwc_otg_dev_out_ep_regs_t * out_regs = _core_if->dev_if->out_ep_regs[_ep->num]; + depctl.d32 = dwc_read_reg32(&out_regs->doepctl); + deptsiz.d32 = dwc_read_reg32(&out_regs->doeptsiz); + + /* Program the transfer size and packet count as follows: + * xfersize = N * (maxpacket + 4 - (maxpacket % 4)) + * pktcnt = N */ + if (_ep->xfer_len == 0) { + /* Zero Length Packet */ + deptsiz.b.xfersize = _ep->maxpacket; + deptsiz.b.pktcnt = 1; + } else { + deptsiz.b.pktcnt = (_ep->xfer_len + (_ep->maxpacket - 1)) / _ep->maxpacket; + deptsiz.b.xfersize = deptsiz.b.pktcnt * _ep->maxpacket; + } + dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32); + DWC_DEBUGPL(DBG_PCDV, "len=%d xfersize=%d pktcnt=%d\n", + _ep->xfer_len, deptsiz.b.xfersize,deptsiz.b.pktcnt); + if (_core_if->dma_enable) { + dwc_write_reg32(&(out_regs->doepdma), (uint32_t) _ep->dma_addr); + } + + /* EP enable */ + depctl.b.cnak = 1; + depctl.b.epena = 1; + dwc_write_reg32(&(out_regs->doepctl), depctl.d32); + } +} + + +/** + * This function continues control IN transfers started by + * dwc_otg_ep0_start_transfer, when the transfer does not fit in a + * single packet. NOTE: The DIEPCTL0/DOEPCTL0 registers only have one + * bit for the packet count. + * + * @param _core_if Programming view of DWC_otg controller. + * @param _ep The EP0 data. + */ +void dwc_otg_ep0_continue_transfer(dwc_otg_core_if_t * _core_if, + dwc_ep_t * _ep) +{ + depctl_data_t depctl; + deptsiz0_data_t deptsiz; + gintmsk_data_t intr_mask = {.d32 = 0}; + if (_ep->is_in == 1) { + dwc_otg_dev_in_ep_regs_t * in_regs = _core_if->dev_if->in_ep_regs[0]; + gnptxsts_data_t tx_status = {.d32 = 0}; + tx_status.d32 = dwc_read_reg32(&_core_if->core_global_regs->gnptxsts); + + /** @todo Should there be check for room in the Tx + * Status Queue. If not remove the code above this comment. */ + depctl.d32 = dwc_read_reg32(&in_regs->diepctl); + deptsiz.d32 = dwc_read_reg32(&in_regs->dieptsiz); + + /* Program the transfer size and packet count + * as follows: xfersize = N * maxpacket + + * short_packet pktcnt = N + (short_packet + * exist ? 1 : 0) + */ + deptsiz.b.xfersize = (_ep->total_len - _ep->xfer_count) > + _ep->maxpacket ? _ep->maxpacket : (_ep->total_len - + _ep->xfer_count); + deptsiz.b.pktcnt = 1; + _ep->xfer_len += deptsiz.b.xfersize; + dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32); + DWC_DEBUGPL(DBG_PCDV,"IN len=%d xfersize=%d pktcnt=%d [%08x]\n", + _ep->xfer_len, deptsiz.b.xfersize,deptsiz.b.pktcnt, deptsiz.d32); + + /* Write the DMA register */ + if (_core_if->hwcfg2.b.architecture == DWC_INT_DMA_ARCH) { + dwc_write_reg32(&(in_regs->diepdma),(uint32_t) _ep->dma_addr); + } + + /* EP enable, IN data in FIFO */ + depctl.b.cnak = 1; + depctl.b.epena = 1; + dwc_write_reg32(&in_regs->diepctl, depctl.d32); + + /** + * Enable the Non-Periodic Tx FIFO empty interrupt, the + * data will be written into the fifo by the ISR. + */ + if (!_core_if->dma_enable) { + /* First clear it from GINTSTS */ + intr_mask.b.nptxfempty = 1; + dwc_write_reg32(&_core_if->core_global_regs->gintsts, + intr_mask.d32); + dwc_modify_reg32(&_core_if->core_global_regs->gintmsk, + intr_mask.d32, intr_mask.d32); + } + } +} + +#ifdef CONFIG_DWC_DEBUG +void dump_msg(const u8 * buf, unsigned int length) +{ + unsigned int start, num, i; + char line[52], *p; + if (length >= 512) + return; + start = 0; + while (length > 0) { + num = min(length, 16u); + p = line; + for (i = 0; i < num; ++i) { + if (i == 8) + *p++ = ' '; + sprintf(p, " %02x", buf[i]); + p += 3; + } + *p = 0; + DWC_PRINT("%6x: %s\n", start, line); + buf += num; + start += num; + length -= num; + } +} + + +#else /* */ +static inline void dump_msg(const u8 * buf, unsigned int length) +{ +} +#endif /* */ + +/** + * This function writes a packet into the Tx FIFO associated with the + * EP. For non-periodic EPs the non-periodic Tx FIFO is written. For + * periodic EPs the periodic Tx FIFO associated with the EP is written + * with all packets for the next micro-frame. + * + * @param _core_if Programming view of DWC_otg controller. + * @param _ep The EP to write packet for. + * @param _dma Indicates if DMA is being used. + */ +void dwc_otg_ep_write_packet(dwc_otg_core_if_t * _core_if, dwc_ep_t * _ep, + int _dma) +{ + /** + * The buffer is padded to DWORD on a per packet basis in + * slave/dma mode if the MPS is not DWORD aligned. The last + * packet, if short, is also padded to a multiple of DWORD. + * + * ep->xfer_buff always starts DWORD aligned in memory and is a + * multiple of DWORD in length + * + * ep->xfer_len can be any number of bytes + * + * ep->xfer_count is a multiple of ep->maxpacket until the last + * packet + * + * FIFO access is DWORD */ +#ifndef CONFIG_OTG_PLB_DMA + uint32_t i; +#endif + uint32_t byte_count; + uint32_t dword_count; + uint32_t * fifo; + uint32_t * data_buff = (uint32_t *) _ep->xfer_buff; +#if !defined( CONFIG_OTG_PLB_DMA_TASKLET) && defined(CONFIG_OTG_PLB_DMA) + uint32_t dma_sts = 0; +#endif + //DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s(%p,%p)\n", __func__, _core_if, _ep); + if (_ep->xfer_count >= _ep->xfer_len) { + DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s() No data for EP%d!!!\n", __func__, _ep->num); + return; + } + + /* Find the byte length of the packet either short packet or MPS */ + if ((_ep->xfer_len - _ep->xfer_count) < _ep->maxpacket) { + byte_count = _ep->xfer_len - _ep->xfer_count; + } else { + byte_count = _ep->maxpacket; + } + + /* Find the DWORD length, padded by extra bytes as neccessary if MPS + * is not a multiple of DWORD */ + dword_count = (byte_count + 3) / 4; + +#ifdef VERBOSE + dump_msg(_ep->xfer_buff, byte_count); +#endif /* */ + + /**@todo NGS Where are the Periodic Tx FIFO addresses + * intialized? What should this be? */ + fifo = _core_if->data_fifo[_ep->num]; + DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "fifo=%p buff=%p *p=%08x bc=%d\n", + fifo, data_buff, *data_buff, byte_count); + if (!_dma) { +#ifdef CONFIG_OTG_PLB_DMA +#ifdef CONFIG_OTG_PLB_DMA_TASKLET + if (byte_count < USB_BUFSIZ) { + int i; + for (i = 0; i < dword_count; i++, data_buff++) { + dwc_write_datafifo32(fifo, *data_buff); + } + } + else { + DWC_DEBUGPL(DBG_SP, "%s set release_later %d\n", __func__, dword_count); + atomic_set(& release_later, 1); + //disable_irq_nosync(94); + dwc_otg_disable_global_interrupts(_core_if); + + _core_if->dma_xfer.dma_data_buff = data_buff; + _core_if->dma_xfer.dma_data_fifo = fifo; + _core_if->dma_xfer.dma_count = dword_count; + _core_if->dma_xfer.dma_dir = OTG_TX_DMA; + tasklet_schedule(_core_if->plbdma_tasklet); + } +#else /* !CONFIG_OTG_PLB_DMA_TASKLET */ + ppc4xx_start_plb_dma(_core_if, data_buff, fifo, (dword_count * 4), + PLB_DMA_INT_DIS , PLB_DMA_CH, OTG_TX_DMA); + while (mfdcr(DCRN_DMACR0 + (DMA_CH0*8)) & DMA_CE_ENABLE) { + } + dma_sts = (uint32_t)ppc4xx_get_dma_status(); +#ifdef OTG_PLB_DMA_DBG + if (!(dma_sts & DMA_CS0)) { + printk("DMA Status (Terminal Count not occured) 0x%08x\n", mfdcr(DCRN_DMASR)); + } +#endif + if (dma_sts & DMA_CH0_ERR) { + printk("DMA Status (Channel 0 Error) 0x%08x\n", mfdcr(DCRN_DMASR)); + } + ppc4xx_clr_dma_status(PLB_DMA_CH); +#ifdef OTG_PLB_DMA_DBG + printk("%32s DMA Status =0x%08x\n", __FUNCTION__, mfdcr(DCRN_DMASR)); /* vj_dbg */ +#endif +#endif /* CONFIG_OTG_PLB_DMA_TASKLET */ + +#else /* DWC_SLAVE mode */ + for (i = 0; i < dword_count; i++, data_buff++) { + dwc_write_datafifo32(fifo, *data_buff); + } +#endif + } + + _ep->xfer_count += byte_count; + _ep->xfer_buff += byte_count; + _ep->dma_addr += byte_count; +} + + +/** + * Set the EP STALL. + * + * @param _core_if Programming view of DWC_otg controller. + * @param _ep The EP to set the stall on. + */ +void dwc_otg_ep_set_stall(dwc_otg_core_if_t * _core_if, dwc_ep_t * _ep) +{ + depctl_data_t depctl; + volatile uint32_t *depctl_addr; + DWC_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, _ep->num, + (_ep->is_in ? "IN" : "OUT")); + if (_ep->is_in == 1) { + depctl_addr = &(_core_if->dev_if->in_ep_regs[_ep->num]->diepctl); + depctl.d32 = dwc_read_reg32(depctl_addr); + + /* set the disable and stall bits */ + if (depctl.b.epena) { + depctl.b.epdis = 1; + } + depctl.b.stall = 1; + dwc_write_reg32(depctl_addr, depctl.d32); + } else { + depctl_addr = &(_core_if->dev_if->out_ep_regs[_ep->num]->doepctl); + depctl.d32 = dwc_read_reg32(depctl_addr); + + /* set the stall bit */ + depctl.b.stall = 1; + dwc_write_reg32(depctl_addr, depctl.d32); + } + DWC_DEBUGPL(DBG_PCD, "DEPCTL=%0x\n", dwc_read_reg32(depctl_addr)); + return; +} + + +/** + * Clear the EP STALL. + * + * @param _core_if Programming view of DWC_otg controller. + * @param _ep The EP to clear stall from. + */ +void dwc_otg_ep_clear_stall(dwc_otg_core_if_t * _core_if, dwc_ep_t * _ep) +{ + depctl_data_t depctl; + volatile uint32_t *depctl_addr; + DWC_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, _ep->num, + (_ep->is_in ? "IN" : "OUT")); + if (_ep->is_in == 1) { + depctl_addr = &(_core_if->dev_if->in_ep_regs[_ep->num]->diepctl); + } else { + depctl_addr = &(_core_if->dev_if->out_ep_regs[_ep->num]->doepctl); + } + depctl.d32 = dwc_read_reg32(depctl_addr); + + /* clear the stall bits */ + depctl.b.stall = 0; + + /* + * USB Spec 9.4.5: For endpoints using data toggle, regardless + * of whether an endpoint has the Halt feature set, a + * ClearFeature(ENDPOINT_HALT) request always results in the + * data toggle being reinitialized to DATA0. + */ + if (_ep->type == DWC_OTG_EP_TYPE_INTR || + _ep->type == DWC_OTG_EP_TYPE_BULK) { + depctl.b.setd0pid = 1; /* DATA0 */ + } + dwc_write_reg32(depctl_addr, depctl.d32); + DWC_DEBUGPL(DBG_PCD, "DEPCTL=%0x\n", dwc_read_reg32(depctl_addr)); + return; +} + + +/** + * This function reads a packet from the Rx FIFO into the destination + * buffer. To read SETUP data use dwc_otg_read_setup_packet. + * + * @param _core_if Programming view of DWC_otg controller. + * @param _dest Destination buffer for the packet. + * @param _bytes Number of bytes to copy to the destination. + */ +void dwc_otg_read_packet(dwc_otg_core_if_t * _core_if, + uint8_t * _dest, uint16_t _bytes) +{ +#ifndef CONFIG_OTG_PLB_DMA + int i; +#endif + int word_count = (_bytes + 3) / 4; + volatile uint32_t *fifo = _core_if->data_fifo[0]; + uint32_t * data_buff = (uint32_t *) _dest; +#if !defined( CONFIG_OTG_PLB_DMA_TASKLET) && defined(CONFIG_OTG_PLB_DMA) + uint32_t dma_sts = 0; +#endif + + /** + * @todo Account for the case where _dest is not dword aligned. This + * requires reading data from the FIFO into a uint32_t temp buffer, + * then moving it into the data buffer. + */ + DWC_DEBUGPL((DBG_PCDV | DBG_CILV | DBG_SP), "%s(%p,%p,%d)\n", __func__, + _core_if, _dest, _bytes); +#ifdef CONFIG_OTG_PLB_DMA +#ifdef CONFIG_OTG_PLB_DMA_TASKLET + if ( _bytes < USB_BUFSIZ) { + int i; + for (i = 0; i < word_count; i++, data_buff++) { + *data_buff = dwc_read_datafifo32(fifo); + } + } else { + DWC_DEBUGPL(DBG_SP, "%s set release_later %d\n", __func__, _bytes); + atomic_set(& release_later, 1); + //disable_irq_nosync(94); + dwc_otg_disable_global_interrupts(_core_if); + + /* plbdma tasklet */ + _core_if->dma_xfer.dma_data_buff = data_buff; + _core_if->dma_xfer.dma_data_fifo = (void *)fifo; + _core_if->dma_xfer.dma_count = word_count; + _core_if->dma_xfer.dma_dir = OTG_RX_DMA; + tasklet_schedule(_core_if->plbdma_tasklet); + } +#else /* !CONFIG_OTG_PLB_DMA_TASKLET */ + ppc4xx_start_plb_dma(_core_if,(void *)fifo,data_buff, (word_count * 4), + PLB_DMA_INT_DIS, PLB_DMA_CH, OTG_RX_DMA); + while (mfdcr(DCRN_DMACR0 + (DMA_CH0*8)) & DMA_CE_ENABLE) { + } + dma_sts = (uint32_t)ppc4xx_get_dma_status(); +#ifdef OTG_PLB_DMA_DBG + if (!(dma_sts & DMA_CS0)) { + printk("DMA Status (Terminal Count not occured) 0x%08x\n", mfdcr(DCRN_DMASR)); + } +#endif + if (dma_sts & DMA_CH0_ERR) { + printk("DMA Status (Channel 0 Error) 0x%08x\n", mfdcr(DCRN_DMASR)); + } + ppc4xx_clr_dma_status(PLB_DMA_CH); +#ifdef OTG_PLB_DMA_DBG + printk("%32s DMA Status =0x%08x\n", __FUNCTION__, mfdcr(DCRN_DMASR)); + printk(" Rxed buffer \n"); + for( i=0; i< _bytes; i++) { + printk(" 0x%02x",*(_dest +i)); + } + printk(" \n End of Rxed buffer \n"); +#endif +#endif /* CONFIG_OTG_PLB_DMA_TASKLET */ + +#else /* DWC_SLAVE mode */ + for (i = 0; i < word_count; i++, data_buff++) { + *data_buff = dwc_read_datafifo32(fifo); + } +#endif + return; +} + + +/** + * This functions reads the device registers and prints them + * + * @param _core_if Programming view of DWC_otg controller. + */ +void dwc_otg_dump_dev_registers(dwc_otg_core_if_t * _core_if) +{ + int i; + volatile uint32_t *addr; + DWC_PRINT("Device Global Registers\n"); + addr = &_core_if->dev_if->dev_global_regs->dcfg; + DWC_PRINT("DCFG @0x%08X : 0x%08X\n", (uint32_t) addr, + dwc_read_reg32(addr)); + addr = &_core_if->dev_if->dev_global_regs->dctl; + DWC_PRINT("DCTL @0x%08X : 0x%08X\n", (uint32_t) addr, + dwc_read_reg32(addr)); + addr = &_core_if->dev_if->dev_global_regs->dsts; + DWC_PRINT("DSTS @0x%08X : 0x%08X\n", (uint32_t) addr, + dwc_read_reg32(addr)); + addr = &_core_if->dev_if->dev_global_regs->diepmsk; + DWC_PRINT("DIEPMSK @0x%08X : 0x%08X\n", (uint32_t) addr, + dwc_read_reg32(addr)); + addr = &_core_if->dev_if->dev_global_regs->doepmsk; + DWC_PRINT("DOEPMSK @0x%08X : 0x%08X\n", (uint32_t) addr, + dwc_read_reg32(addr)); + addr = &_core_if->dev_if->dev_global_regs->daint; + DWC_PRINT("DAINT @0x%08X : 0x%08X\n", (uint32_t) addr, + dwc_read_reg32(addr)); + addr = &_core_if->dev_if->dev_global_regs->dtknqr1; + DWC_PRINT("DTKNQR1 @0x%08X : 0x%08X\n", (uint32_t) addr, + dwc_read_reg32(addr)); + if (_core_if->hwcfg2.b.dev_token_q_depth > 6) { + addr = &_core_if->dev_if->dev_global_regs->dtknqr2; + DWC_PRINT("DTKNQR2 @0x%08X : 0x%08X\n", + (uint32_t) addr, dwc_read_reg32(addr)); + } + addr = &_core_if->dev_if->dev_global_regs->dvbusdis; + DWC_PRINT("DVBUSID @0x%08X : 0x%08X\n", (uint32_t) addr, + dwc_read_reg32(addr)); + addr = &_core_if->dev_if->dev_global_regs->dvbuspulse; + DWC_PRINT("DVBUSPULSE @0x%08X : 0x%08X\n", + (uint32_t) addr, dwc_read_reg32(addr)); + if (_core_if->hwcfg2.b.dev_token_q_depth > 14) { + addr = &_core_if->dev_if->dev_global_regs->dtknqr3_dthrctl; + DWC_PRINT("DTKNQR3 @0x%08X : 0x%08X\n", + (uint32_t) addr, dwc_read_reg32(addr)); + } + if (_core_if->hwcfg2.b.dev_token_q_depth > 22) { + addr = &_core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk; + DWC_PRINT("DTKNQR4 @0x%08X : 0x%08X\n", (uint32_t) addr, + dwc_read_reg32(addr)); + } + for (i = 0; i <= _core_if->dev_if->num_in_eps; i++) { + DWC_PRINT("Device IN EP %d Registers\n", i); + addr = &_core_if->dev_if->in_ep_regs[i]->diepctl; + DWC_PRINT("DIEPCTL @0x%08X : 0x%08X\n", (uint32_t) addr, + dwc_read_reg32(addr)); + addr = &_core_if->dev_if->in_ep_regs[i]->diepint; + DWC_PRINT("DIEPINT @0x%08X : 0x%08X\n", (uint32_t) addr, + dwc_read_reg32(addr)); + addr = &_core_if->dev_if->in_ep_regs[i]->dieptsiz; + DWC_PRINT("DIETSIZ @0x%08X : 0x%08X\n", (uint32_t) addr, + dwc_read_reg32(addr)); + addr = &_core_if->dev_if->in_ep_regs[i]->diepdma; + DWC_PRINT("DIEPDMA @0x%08X : 0x%08X\n", (uint32_t) addr, + dwc_read_reg32(addr)); + addr = &_core_if->dev_if->in_ep_regs[i]->dtxfsts; + DWC_PRINT("DTXFSTS @0x%08X : 0x%08X\n", (uint32_t) addr, + dwc_read_reg32(addr)); + } + for (i = 0; i <= _core_if->dev_if->num_out_eps; i++) { + DWC_PRINT("Device OUT EP %d Registers\n", i); + addr = &_core_if->dev_if->out_ep_regs[i]->doepctl; + DWC_PRINT("DOEPCTL @0x%08X : 0x%08X\n", (uint32_t) addr, + dwc_read_reg32(addr)); + addr = &_core_if->dev_if->out_ep_regs[i]->doepfn; + DWC_PRINT("DOEPFN @0x%08X : 0x%08X\n", (uint32_t) addr, + dwc_read_reg32(addr)); + addr = &_core_if->dev_if->out_ep_regs[i]->doepint; + DWC_PRINT("DOEPINT @0x%08X : 0x%08X\n", (uint32_t) addr, + dwc_read_reg32(addr)); + addr = &_core_if->dev_if->out_ep_regs[i]->doeptsiz; + DWC_PRINT("DOETSIZ @0x%08X : 0x%08X\n", (uint32_t) addr, + dwc_read_reg32(addr)); + addr = &_core_if->dev_if->out_ep_regs[i]->doepdma; + DWC_PRINT("DOEPDMA @0x%08X : 0x%08X\n", (uint32_t) addr, + dwc_read_reg32(addr)); + } + return; +} + + +/** + * This function reads the host registers and prints them + * + * @param _core_if Programming view of DWC_otg controller. + */ +void dwc_otg_dump_host_registers(dwc_otg_core_if_t * _core_if) +{ + int i; + volatile uint32_t *addr; + DWC_PRINT("Host Global Registers\n"); + addr = &_core_if->host_if->host_global_regs->hcfg; + DWC_PRINT("HCFG @0x%08X : 0x%08X\n", (uint32_t) addr, + dwc_read_reg32(addr)); + addr = &_core_if->host_if->host_global_regs->hfir; + DWC_PRINT("HFIR @0x%08X : 0x%08X\n", (uint32_t) addr, + dwc_read_reg32(addr)); + addr = &_core_if->host_if->host_global_regs->hfnum; + DWC_PRINT("HFNUM @0x%08X : 0x%08X\n", (uint32_t) addr, + dwc_read_reg32(addr)); + addr = &_core_if->host_if->host_global_regs->hptxsts; + DWC_PRINT("HPTXSTS @0x%08X : 0x%08X\n", (uint32_t) addr, + dwc_read_reg32(addr)); + addr = &_core_if->host_if->host_global_regs->haint; + DWC_PRINT("HAINT @0x%08X : 0x%08X\n", (uint32_t) addr, + dwc_read_reg32(addr)); + addr = &_core_if->host_if->host_global_regs->haintmsk; + DWC_PRINT("HAINTMSK @0x%08X : 0x%08X\n", (uint32_t) addr, + dwc_read_reg32(addr)); + addr = _core_if->host_if->hprt0; + DWC_PRINT("HPRT0 @0x%08X : 0x%08X\n", (uint32_t) addr, + dwc_read_reg32(addr)); + for (i = 0; i < _core_if->core_params->host_channels; i++) { + DWC_PRINT("Host Channel %d Specific Registers\n", i); + addr = &_core_if->host_if->hc_regs[i]->hcchar; + DWC_PRINT("HCCHAR @0x%08X : 0x%08X\n", (uint32_t) addr, + dwc_read_reg32(addr)); + addr = &_core_if->host_if->hc_regs[i]->hcsplt; + DWC_PRINT("HCSPLT @0x%08X : 0x%08X\n", (uint32_t) addr, + dwc_read_reg32(addr)); + addr = &_core_if->host_if->hc_regs[i]->hcint; + DWC_PRINT("HCINT @0x%08X : 0x%08X\n", (uint32_t) addr, + dwc_read_reg32(addr)); + addr = &_core_if->host_if->hc_regs[i]->hcintmsk; + DWC_PRINT("HCINTMSK @0x%08X : 0x%08X\n", (uint32_t) addr, + dwc_read_reg32(addr)); + addr = &_core_if->host_if->hc_regs[i]->hctsiz; + DWC_PRINT("HCTSIZ @0x%08X : 0x%08X\n", (uint32_t) addr, + dwc_read_reg32(addr)); + addr = &_core_if->host_if->hc_regs[i]->hcdma; + DWC_PRINT("HCDMA @0x%08X : 0x%08X\n", (uint32_t) addr, + dwc_read_reg32(addr)); + } + return; +} + + +/** + * This function reads the core global registers and prints them + * + * @param _core_if Programming view of DWC_otg controller. + */ +void dwc_otg_dump_global_registers(dwc_otg_core_if_t * _core_if) +{ + int i; + volatile uint32_t *addr; + DWC_PRINT("Core Global Registers"); + addr = &_core_if->core_global_regs->gotgctl; + DWC_PRINT("GOTGCTL @0x%08X : 0x%08X\n", (uint32_t) addr, + dwc_read_reg32(addr)); + addr = &_core_if->core_global_regs->gotgint; + DWC_PRINT("GOTGINT @0x%08X : 0x%08X\n", (uint32_t) addr, + dwc_read_reg32(addr)); + addr = &_core_if->core_global_regs->gahbcfg; + DWC_PRINT("GAHBCFG @0x%08X : 0x%08X\n", (uint32_t) addr, + dwc_read_reg32(addr)); + addr = &_core_if->core_global_regs->gusbcfg; + DWC_PRINT("GUSBCFG @0x%08X : 0x%08X\n", (uint32_t) addr, + dwc_read_reg32(addr)); + addr = &_core_if->core_global_regs->grstctl; + DWC_PRINT("GRSTCTL @0x%08X : 0x%08X\n", (uint32_t) addr, + dwc_read_reg32(addr)); + addr = &_core_if->core_global_regs->gintsts; + DWC_PRINT("GINTSTS @0x%08X : 0x%08X\n", (uint32_t) addr, + dwc_read_reg32(addr)); + addr = &_core_if->core_global_regs->gintmsk; + DWC_PRINT("GINTMSK @0x%08X : 0x%08X\n", (uint32_t) addr, + dwc_read_reg32(addr)); + addr = &_core_if->core_global_regs->grxstsr; + DWC_PRINT("GRXSTSR @0x%08X : 0x%08X\n", (uint32_t) addr, + dwc_read_reg32(addr)); + + //addr=&_core_if->core_global_regs->grxstsp; + //DWC_PRINT("GRXSTSP @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr = &_core_if->core_global_regs->grxfsiz; + DWC_PRINT("GRXFSIZ @0x%08X : 0x%08X\n", (uint32_t) addr, + dwc_read_reg32(addr)); + addr = &_core_if->core_global_regs->gnptxfsiz; + DWC_PRINT("GNPTXFSIZ @0x%08X : 0x%08X\n", (uint32_t) addr, + dwc_read_reg32(addr)); + addr = &_core_if->core_global_regs->gnptxsts; + DWC_PRINT("GNPTXSTS @0x%08X : 0x%08X\n", (uint32_t) addr, + dwc_read_reg32(addr)); + addr = &_core_if->core_global_regs->gi2cctl; + DWC_PRINT("GI2CCTL @0x%08X : 0x%08X\n", (uint32_t) addr, + dwc_read_reg32(addr)); + addr = &_core_if->core_global_regs->gpvndctl; + DWC_PRINT("GPVNDCTL @0x%08X : 0x%08X\n", (uint32_t) addr, + dwc_read_reg32(addr)); + addr = &_core_if->core_global_regs->ggpio; + DWC_PRINT("GGPIO @0x%08X : 0x%08X\n", (uint32_t) addr, + dwc_read_reg32(addr)); + addr = &_core_if->core_global_regs->guid; + DWC_PRINT("GUID @0x%08X : 0x%08X\n", (uint32_t) addr, + dwc_read_reg32(addr)); + addr = &_core_if->core_global_regs->gsnpsid; + DWC_PRINT("GSNPSID @0x%08X : 0x%08X\n", (uint32_t) addr, + dwc_read_reg32(addr)); + addr = &_core_if->core_global_regs->ghwcfg1; + DWC_PRINT("GHWCFG1 @0x%08X : 0x%08X\n", (uint32_t) addr, + dwc_read_reg32(addr)); + addr = &_core_if->core_global_regs->ghwcfg2; + DWC_PRINT("GHWCFG2 @0x%08X : 0x%08X\n", (uint32_t) addr, + dwc_read_reg32(addr)); + addr = &_core_if->core_global_regs->ghwcfg3; + DWC_PRINT("GHWCFG3 @0x%08X : 0x%08X\n", (uint32_t) addr, + dwc_read_reg32(addr)); + addr = &_core_if->core_global_regs->ghwcfg4; + DWC_PRINT("GHWCFG4 @0x%08X : 0x%08X\n", (uint32_t) addr, + dwc_read_reg32(addr)); + addr = &_core_if->core_global_regs->hptxfsiz; + DWC_PRINT("HPTXFSIZ @0x%08X : 0x%08X\n", (uint32_t) addr, + dwc_read_reg32(addr)); + for (i = 0; i < _core_if->hwcfg4.b.num_dev_perio_in_ep; i++) { + addr = &_core_if->core_global_regs->dptxfsiz_dieptxf[i]; + DWC_PRINT("DPTXFSIZ[%d] @0x%08X : 0x%08X\n", i, + (uint32_t) addr, dwc_read_reg32(addr)); + } +} + + +/** + * Flush a Tx FIFO. + * + * @param _core_if Programming view of DWC_otg controller. + * @param _num Tx FIFO to flush. + */ +extern void dwc_otg_flush_tx_fifo(dwc_otg_core_if_t * _core_if, + const int _num) +{ + dwc_otg_core_global_regs_t * global_regs = _core_if->core_global_regs; + volatile grstctl_t greset = {.d32 = 0 }; + int count = 0; + DWC_DEBUGPL((DBG_CIL | DBG_PCDV), "Flush Tx FIFO %d\n", _num); + greset.b.txfflsh = 1; + greset.b.txfnum = _num; + dwc_write_reg32(&global_regs->grstctl, greset.d32); + + do { + greset.d32 = dwc_read_reg32(&global_regs->grstctl); + if (++count > 10000) { + DWC_WARN("%s() HANG! GRSTCTL=%0x GNPTXSTS=0x%08x\n", + __func__, greset.d32, dwc_read_reg32(&global_regs->gnptxsts)); + break; + } + udelay(1); + } while (greset.b.txfflsh == 1); + /* Wait for 3 PHY Clocks */ + UDELAY(1); +} + + +/** + * Flush Rx FIFO. + * + * @param _core_if Programming view of DWC_otg controller. + */ +extern void dwc_otg_flush_rx_fifo(dwc_otg_core_if_t * _core_if) +{ + dwc_otg_core_global_regs_t * global_regs = _core_if->core_global_regs; + volatile grstctl_t greset = {.d32 = 0 }; + int count = 0; + DWC_DEBUGPL((DBG_CIL | DBG_PCDV), "%s\n", __func__); + + /* + * + */ + greset.b.rxfflsh = 1; + dwc_write_reg32(&global_regs->grstctl, greset.d32); + + do { + greset.d32 = dwc_read_reg32(&global_regs->grstctl); + if (++count > 10000) { + DWC_WARN("%s() HANG! GRSTCTL=%0x\n", __func__, greset.d32); + break; + } + udelay(1); + } while (greset.b.rxfflsh == 1); + + /* Wait for 3 PHY Clocks */ + UDELAY(1); +} + + +/** + * Do core a soft reset of the core. Be careful with this because it + * resets all the internal state machines of the core. + */ +void dwc_otg_core_reset(dwc_otg_core_if_t * _core_if) +{ + dwc_otg_core_global_regs_t * global_regs = _core_if->core_global_regs; + volatile grstctl_t greset = {.d32 = 0 }; + int count = 0; + DWC_DEBUGPL(DBG_CILV, "%s\n", __func__); + + /* Wait for AHB master IDLE state. */ + do { + UDELAY(10); + greset.d32 = dwc_read_reg32(&global_regs->grstctl); + if (++count > 100000) { + DWC_WARN("%s() HANG! AHB Idle GRSTCTL=%0x\n", __func__, greset.d32); + return; + } + } while (greset.b.ahbidle == 0); + + /* Core Soft Reset */ + count = 0; + greset.b.csftrst = 1; + dwc_write_reg32(&global_regs->grstctl, greset.d32); + + do { + greset.d32 = dwc_read_reg32(&global_regs->grstctl); + if (++count > 10000) { + DWC_WARN("%s() HANG! Soft Reset GRSTCTL=%0x\n", __func__, greset.d32); + break; + } + udelay(1); + } while (greset.b.csftrst == 1); + + /* Wait for 3 PHY Clocks */ + //DWC_PRINT("100ms\n"); + MDELAY(100); +} + + +/** + * Register HCD callbacks. The callbacks are used to start and stop + * the HCD for interrupt processing. + * + * @param _core_if Programming view of DWC_otg controller. + * @param _cb the HCD callback structure. + * @param _p pointer to be passed to callback function (usb_hcd*). + */ +extern void dwc_otg_cil_register_hcd_callbacks(dwc_otg_core_if_t * _core_if, + dwc_otg_cil_callbacks_t * _cb, void *_p) +{ + _core_if->hcd_cb = _cb; + _cb->p = _p; +} + +/** + * Register PCD callbacks. The callbacks are used to start and stop + * the PCD for interrupt processing. + * + * @param _core_if Programming view of DWC_otg controller. + * @param _cb the PCD callback structure. + * @param _p pointer to be passed to callback function (pcd*). + */ +extern void dwc_otg_cil_register_pcd_callbacks(dwc_otg_core_if_t * _core_if, + dwc_otg_cil_callbacks_t * _cb, void *_p) +{ + _core_if->pcd_cb = _cb; + _cb->p = _p; +} + diff --git a/drivers/usb/gadget/dwc_otg/dwc_otg_hcd.c b/drivers/usb/gadget/dwc_otg/dwc_otg_hcd.c index a813327bf40..6b83ee46440 100644 --- a/drivers/usb/gadget/dwc_otg/dwc_otg_hcd.c +++ b/drivers/usb/gadget/dwc_otg/dwc_otg_hcd.c @@ -31,7 +31,7 @@ * DAMAGE. * ========================================================================== */ -#ifndef DWC_DEVICE_ONLY +#ifndef CONFIG_DWC_DEVICE_ONLY /** * @file @@ -78,21 +78,21 @@ static const struct hc_driver dwc_otg_hc_driver = .hcd_priv_size = sizeof(dwc_otg_hcd_t), .irq = dwc_otg_hcd_irq, .flags = HCD_MEMORY | HCD_USB2, - //.reset = - .start = dwc_otg_hcd_start, + //.reset = + .start = dwc_otg_hcd_start, #ifdef CONFIG_PM .bus_suspend = dwc_otg_hcd_suspend, - .bus_resume = dwc_otg_hcd_resume, + .bus_resume = dwc_otg_hcd_resume, #endif - .stop = dwc_otg_hcd_stop, + .stop = dwc_otg_hcd_stop, .urb_enqueue = dwc_otg_hcd_urb_enqueue, .urb_dequeue = dwc_otg_hcd_urb_dequeue, .endpoint_disable = dwc_otg_hcd_endpoint_disable, .get_frame_number = dwc_otg_hcd_get_frame_number, .hub_status_data = dwc_otg_hcd_hub_status_data, .hub_control = dwc_otg_hcd_hub_control, - //.hub_suspend = - //.hub_resume = + //.hub_suspend = + //.hub_resume = }; @@ -159,7 +159,7 @@ static int32_t dwc_otg_hcd_stop_cb(void *_p) static void del_xfer_timers(dwc_otg_hcd_t * _hcd) { -#ifdef DEBUG +#ifdef CONFIG_DWC_DEBUG int i; int num_channels = _hcd->core_if->core_params->host_channels; for (i = 0; i < num_channels; i++) { @@ -394,7 +394,7 @@ static struct tasklet_struct reset_tasklet = }; -#ifdef OTG_PLB_DMA_TASKLET +#ifdef CONFIG_OTG_PLB_DMA_TASKLET /** * plbdma tasklet function */ @@ -448,6 +448,8 @@ static struct tasklet_struct plbdma_tasklet = * USB bus with the core and calls the hc_driver->start() function. It returns * a negative error on failure. */ +int init_hcd_usecs(dwc_otg_hcd_t *_hcd); + int __init dwc_otg_hcd_init(struct device *_dev, dwc_otg_device_t * dwc_otg_device) { struct usb_hcd *hcd = NULL; @@ -475,6 +477,7 @@ int __init dwc_otg_hcd_init(struct device *_dev, dwc_otg_device_t * dwc_otg_de dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); dwc_otg_hcd->core_if = otg_dev->core_if; otg_dev->hcd = dwc_otg_hcd; + spin_lock_init(&dwc_otg_hcd->lock); /* Register the HCD CIL Callbacks */ dwc_otg_cil_register_hcd_callbacks(otg_dev->core_if, &hcd_cil_callbacks, hcd); @@ -507,7 +510,7 @@ int __init dwc_otg_hcd_init(struct device *_dev, dwc_otg_device_t * dwc_otg_de channel->hc_num = i; dwc_otg_hcd->hc_ptr_array[i] = channel; -#ifdef DEBUG +#ifdef CONFIG_DWC_DEBUG init_timer(&dwc_otg_hcd->core_if->hc_xfer_timer[i]); #endif /* */ DWC_DEBUGPL(DBG_HCDV, "HCD Added channel #%d, hc=%p\n", i,channel); @@ -520,7 +523,7 @@ int __init dwc_otg_hcd_init(struct device *_dev, dwc_otg_device_t * dwc_otg_de reset_tasklet.data = (unsigned long)dwc_otg_hcd; dwc_otg_hcd->reset_tasklet = &reset_tasklet; -#ifdef OTG_PLB_DMA_TASKLET +#ifdef CONFIG_OTG_PLB_DMA_TASKLET /* Initialize plbdma tasklet. */ plbdma_tasklet.data = (unsigned long)dwc_otg_hcd->core_if; dwc_otg_hcd->core_if->plbdma_tasklet = &plbdma_tasklet; @@ -536,6 +539,9 @@ int __init dwc_otg_hcd_init(struct device *_dev, dwc_otg_device_t * dwc_otg_de _dev->dma_mask = (void *)0; _dev->coherent_dma_mask = 0; } + + init_hcd_usecs(dwc_otg_hcd); + /* * Finish generic HCD initialization and start the HCD. This function * allocates the DMA buffer pool, registers the USB bus, requests the @@ -564,8 +570,8 @@ int __init dwc_otg_hcd_init(struct device *_dev, dwc_otg_device_t * dwc_otg_de goto error3; } DWC_DEBUGPL(DBG_HCD, - "DWC OTG HCD Initialized HCD, bus=%s, usbbus=%d\n", - _dev->bus_id, hcd->self.busnum); + "DWC OTG HCD Initialized HCD, usbbus=%d\n", + hcd->self.busnum); return 0; /* Error conditions */ @@ -612,8 +618,7 @@ static void hcd_reinit(dwc_otg_hcd_t * _hcd) dwc_hc_t * channel; _hcd->flags.d32 = 0; _hcd->non_periodic_qh_ptr = &_hcd->non_periodic_sched_active; - _hcd->non_periodic_channels = 0; - _hcd->periodic_channels = 0; + _hcd->available_host_channels = _hcd->core_if->core_params->host_channels; /* * Put all channels in the free channel list and clean up channel @@ -690,8 +695,8 @@ static void qh_list_free(dwc_otg_hcd_t * _hcd, struct list_head *_qh_list) return; } - /* Ensure there are no QTDs or URBs left. */ - kill_urbs_in_qh_list(_hcd, _qh_list); + /* Ensure there are no QTDs or URBs left. */ + kill_urbs_in_qh_list(_hcd, _qh_list); for (item = _qh_list->next; item != _qh_list; item = _qh_list->next) { qh = list_entry(item, dwc_otg_qh_t, qh_list_entry); dwc_otg_hcd_qh_remove_and_free(_hcd, qh); @@ -785,7 +790,7 @@ void dwc_otg_hcd_free(struct usb_hcd *_hcd) } -#ifdef DEBUG +#ifdef CONFIG_DWC_DEBUG static void dump_urb_info(struct urb *_urb, char *_fn_name) { DWC_PRINT("%s, urb %p\n", _fn_name, _urb); @@ -911,18 +916,20 @@ int dwc_otg_hcd_urb_enqueue(struct usb_hcd *_hcd, local_irq_restore(flags); return retval; } -#ifdef DEBUG +#ifdef CONFIG_DWC_DEBUG if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { dump_urb_info(_urb, "dwc_otg_hcd_urb_enqueue"); } #endif /* */ if (!dwc_otg_hcd->flags.b.port_connect_status) { /* No longer connected. */ + usb_hcd_unlink_urb_from_ep(_hcd, _urb); local_irq_restore(flags); return -ENODEV; } qtd = dwc_otg_hcd_qtd_create(_urb); if (qtd == NULL) { + usb_hcd_unlink_urb_from_ep(_hcd, _urb); local_irq_restore(flags); DWC_ERROR("DWC OTG HCD URB Enqueue failed creating QTD\n"); return -ENOMEM; @@ -931,6 +938,7 @@ int dwc_otg_hcd_urb_enqueue(struct usb_hcd *_hcd, if (retval < 0) { DWC_ERROR("DWC OTG HCD URB Enqueue failed adding QTD. " "Error status %d\n", retval); + usb_hcd_unlink_urb_from_ep(_hcd, _urb); dwc_otg_hcd_qtd_free(qtd); } local_irq_restore(flags); @@ -946,9 +954,14 @@ int dwc_otg_hcd_urb_dequeue(struct usb_hcd *_hcd, struct urb *_urb, int _status) dwc_otg_hcd_t * dwc_otg_hcd; dwc_otg_qtd_t * urb_qtd; dwc_otg_qh_t * qh; + struct usb_host_endpoint *_ep = dwc_urb_to_endpoint(_urb); int retval; DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Dequeue\n"); + + if (!_ep) + return -EINVAL; + local_irq_save(flags); retval = usb_hcd_check_unlink_urb(_hcd, _urb, _status); if (retval) { @@ -967,7 +980,7 @@ int dwc_otg_hcd_urb_dequeue(struct usb_hcd *_hcd, struct urb *_urb, int _status) if (qh == NULL) { goto done; } -#ifdef DEBUG +#ifdef CONFIG_DWC_DEBUG if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { dump_urb_info(_urb, "dwc_otg_hcd_urb_dequeue"); if (urb_qtd == qh->qtd_in_process) { @@ -1005,27 +1018,18 @@ int dwc_otg_hcd_urb_dequeue(struct usb_hcd *_hcd, struct urb *_urb, int _status) dwc_otg_hcd_qh_remove(dwc_otg_hcd, qh); } done: - local_irq_restore(flags); _urb->hcpriv = NULL; /* Higher layer software sets URB status. */ -#if 1 /* Fixed bug relate kernel hung when unplug cable */ usb_hcd_unlink_urb_from_ep(_hcd, _urb); usb_hcd_giveback_urb(_hcd, _urb, _status); + + local_irq_restore(flags); + if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { DWC_PRINT("Called usb_hcd_giveback_urb()\n"); DWC_PRINT(" urb->status = %d\n", _status); } -#else - if (_status != -ECONNRESET) { - usb_hcd_unlink_urb_from_ep(_hcd, _urb); - usb_hcd_giveback_urb(_hcd, _urb, _status); - if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { - DWC_PRINT("Called usb_hcd_giveback_urb()\n"); - DWC_PRINT(" urb->status = %d\n", _status); - } - } -#endif return 0; } @@ -1044,7 +1048,7 @@ void dwc_otg_hcd_endpoint_disable(struct usb_hcd *_hcd, qh = (dwc_otg_qh_t *) (_ep->hcpriv); if (qh != NULL) { -#ifdef DEBUG +#ifdef CONFIG_DWC_DEBUG /** Check that the QTD list is really empty */ if (!list_empty(&qh->qtd_list)) { DWC_WARN("DWC OTG HCD EP DISABLE:" @@ -1058,7 +1062,6 @@ void dwc_otg_hcd_endpoint_disable(struct usb_hcd *_hcd, return; } -extern int fscz_debug; /** Handles host mode interrupts for the DWC_otg controller. Returns IRQ_NONE if * there was no interrupt to handle. Returns IRQ_HANDLED if there was a valid * interrupt. @@ -1084,7 +1087,7 @@ int dwc_otg_hcd_hub_status_data(struct usb_hcd *_hcd, char *_buf) || dwc_otg_hcd->flags.b.port_suspend_change || dwc_otg_hcd->flags.b.port_over_current_change) << 1; -#ifdef DEBUG +#ifdef CONFIG_DWC_DEBUG if (_buf[0]) { DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB STATUS DATA:" " Root port status changed\n"); @@ -1821,7 +1824,7 @@ int dwc_otg_hcd_hub_control(struct usb_hcd *_hcd, u16 _typeReq, u16 _wValue, if (hprt0.b.prtpwr) port_status |= (1 << USB_PORT_FEAT_POWER); if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED) - port_status |= (1 << USB_PORT_FEAT_HIGHSPEED); + port_status |= USB_PORT_STAT_HIGH_SPEED; else if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED) port_status |= (1 << USB_PORT_FEAT_LOWSPEED); @@ -1903,7 +1906,7 @@ int dwc_otg_hcd_hub_control(struct usb_hcd *_hcd, u16 _typeReq, u16 _wValue, } /* Clear reset bit in 10ms (FS/LS) or 50ms (HS) */ - MDELAY(60); + MDELAY(60); hprt0.b.prtrst = 0; dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); break; @@ -2216,6 +2219,7 @@ dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t *_hcd) struct list_head *qh_ptr; dwc_otg_qh_t * qh; int num_channels; + unsigned long flags; dwc_otg_transaction_type_e ret_val = DWC_OTG_TRANSACTION_NONE; #ifdef DEBUG_SOF @@ -2223,9 +2227,20 @@ dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t *_hcd) #endif /* */ /* Process entries in the periodic ready list. */ + num_channels = _hcd->core_if->core_params->host_channels; qh_ptr = _hcd->periodic_sched_ready.next; while (qh_ptr != &_hcd->periodic_sched_ready && !list_empty(&_hcd->free_hc_list)) { + + // Make sure we leave one channel for non periodic transactions. + local_irq_save(flags); + if (_hcd->available_host_channels <= 1) { + local_irq_restore(flags); + break; + } + _hcd->available_host_channels--; + local_irq_restore(flags); + qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry); assign_and_init_hc(_hcd, qh); /* @@ -2233,7 +2248,9 @@ dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t *_hcd) * periodic assigned schedule. */ qh_ptr = qh_ptr->next; + local_irq_save(flags); list_move(&qh->qh_list_entry, &_hcd->periodic_sched_assigned); + local_irq_restore(flags); ret_val = DWC_OTG_TRANSACTION_PERIODIC; } /* @@ -2245,7 +2262,6 @@ dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t *_hcd) while (qh_ptr != &_hcd->non_periodic_sched_deferred) { uint16_t frame_number = dwc_otg_hcd_get_frame_number(dwc_otg_hcd_to_hcd(_hcd)); - unsigned long flags; qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry); qh_ptr = qh_ptr->next; @@ -2269,10 +2285,17 @@ dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t *_hcd) */ qh_ptr = _hcd->non_periodic_sched_inactive.next; num_channels = _hcd->core_if->core_params->host_channels; - while (qh_ptr != &_hcd->non_periodic_sched_inactive && - (_hcd->non_periodic_channels < - num_channels - _hcd->periodic_channels) + while (qh_ptr != &_hcd->non_periodic_sched_inactive && !list_empty(&_hcd->free_hc_list)) { + + local_irq_save(flags); + if (_hcd->available_host_channels < 1) { + local_irq_restore(flags); + break; + } + _hcd->available_host_channels--; + local_irq_restore(flags); + qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry); assign_and_init_hc(_hcd, qh); @@ -2281,14 +2304,15 @@ dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t *_hcd) * non-periodic active schedule. */ qh_ptr = qh_ptr->next; + local_irq_save(flags); list_move(&qh->qh_list_entry, &_hcd->non_periodic_sched_active); + local_irq_restore(flags); if (ret_val == DWC_OTG_TRANSACTION_NONE) { ret_val = DWC_OTG_TRANSACTION_NON_PERIODIC; } else { ret_val = DWC_OTG_TRANSACTION_ALL; } - _hcd->non_periodic_channels++; } return ret_val; } @@ -2375,7 +2399,7 @@ static void process_non_periodic_channels(dwc_otg_hcd_t * _hcd) _hcd->core_if->core_global_regs; DWC_DEBUGPL(DBG_HCDV, "Queue non-periodic transactions\n"); -#ifdef DEBUG +#ifdef CONFIG_DWC_DEBUG tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts); DWC_DEBUGPL(DBG_HCDV, " NP Tx Req Queue Space Avail (before queue): %d\n", tx_status.b.nptxqspcavail); @@ -2416,7 +2440,7 @@ static void process_non_periodic_channels(dwc_otg_hcd_t * _hcd) no_fifo_space = 1; break; } -#ifdef OTG_PLB_DMA_TASKLET +#ifdef CONFIG_OTG_PLB_DMA_TASKLET if (atomic_read(&release_later)) { break; } @@ -2432,8 +2456,8 @@ static void process_non_periodic_channels(dwc_otg_hcd_t * _hcd) gintmsk_data_t intr_mask = {.d32 = 0}; intr_mask.b.nptxfempty = 1; -#ifndef OTG_PLB_DMA_TASKLET -#ifdef DEBUG +#ifndef CONFIG_OTG_PLB_DMA_TASKLET +#ifdef CONFIG_DWC_DEBUG tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts); DWC_DEBUGPL(DBG_HCDV, " NP Tx Req Queue Space Avail (after queue): %d\n", tx_status.b.nptxqspcavail); @@ -2484,7 +2508,7 @@ static void process_periodic_channels(dwc_otg_hcd_t * _hcd) host_regs = _hcd->core_if->host_if->host_global_regs; DWC_DEBUGPL(DBG_HCDV, "Queue periodic transactions\n"); -#ifdef DEBUG +#ifdef CONFIG_DWC_DEBUG tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts); DWC_DEBUGPL(DBG_HCDV, " P Tx Req Queue Space Avail (before queue): %d\n", tx_status.b.ptxqspcavail); @@ -2544,7 +2568,7 @@ static void process_periodic_channels(dwc_otg_hcd_t * _hcd) global_regs = _hcd->core_if->core_global_regs; intr_mask.b.ptxfempty = 1; -#ifdef DEBUG +#ifdef CONFIG_DWC_DEBUG tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts); DWC_DEBUGPL(DBG_HCDV," P Tx Req Queue Space Avail (after queue): %d\n", tx_status.b.ptxqspcavail); @@ -2629,7 +2653,7 @@ __releases(_hcd->lock) __acquires(_hcd->lock) { -#ifdef DEBUG +#ifdef CONFIG_DWC_DEBUG if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { DWC_PRINT("%s: urb %p, device %d, ep %d %s, status=%d\n", __func__, _urb, usb_pipedevice(_urb->pipe), @@ -2645,11 +2669,11 @@ __acquires(_hcd->lock) } #endif /* */ + spin_lock(&_hcd->lock); _urb->hcpriv = NULL; usb_hcd_unlink_urb_from_ep(dwc_otg_hcd_to_hcd(_hcd), _urb); - spin_unlock(&_hcd->lock); usb_hcd_giveback_urb(dwc_otg_hcd_to_hcd(_hcd), _urb, _status); - spin_lock(&_hcd->lock); + spin_unlock(&_hcd->lock); } @@ -2663,7 +2687,7 @@ dwc_otg_qh_t * dwc_urb_to_qh(struct urb *_urb) } -#ifdef DEBUG +#ifdef CONFIG_DWC_DEBUG void dwc_print_setup_data(uint8_t * setup) { int i; @@ -2721,7 +2745,7 @@ void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t * _hcd) { /* -#ifdef DEBUG +#ifdef CONFIG_DWC_DEBUG DWC_PRINT("Frame remaining at SOF:\n"); DWC_PRINT(" samples %u, accum %llu, avg %llu\n", _hcd->frrem_samples, _hcd->frrem_accum, @@ -2783,7 +2807,7 @@ void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t * _hcd) } void dwc_otg_hcd_dump_state(dwc_otg_hcd_t * _hcd) { -#ifdef DEBUG +#ifdef CONFIG_DWC_DEBUG int num_channels; int i; gnptxsts_data_t np_tx_status; @@ -2873,9 +2897,7 @@ void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t * _hcd) urb->actual_length); } } - } DWC_PRINT(" non_periodic_channels: %d\n", - _hcd->non_periodic_channels); - DWC_PRINT(" periodic_channels: %d\n", _hcd->periodic_channels); + } DWC_PRINT(" periodic_usecs: %d\n", _hcd->periodic_usecs); np_tx_status.d32 = dwc_read_reg32(&_hcd->core_if->core_global_regs->gnptxsts); @@ -2897,4 +2919,4 @@ void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t * _hcd) #endif /* */ } -#endif /* DWC_DEVICE_ONLY */ +#endif /* CONFIG_DWC_DEVICE_ONLY */ diff --git a/drivers/usb/gadget/dwc_otg/dwc_otg_hcd.c.org b/drivers/usb/gadget/dwc_otg/dwc_otg_hcd.c.org new file mode 100644 index 00000000000..a813327bf40 --- /dev/null +++ b/drivers/usb/gadget/dwc_otg/dwc_otg_hcd.c.org @@ -0,0 +1,2900 @@ +/* ========================================================================== + * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_hcd.c $ + * $Revision: #16 $ + * $Date: 2006/12/05 $ + * $Change: 762293 $ + * + * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, + * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless + * otherwise expressly agreed to in writing between Synopsys and you. + * + * The Software IS NOT an item of Licensed Software or Licensed Product under + * any End User Software License Agreement or Agreement for Licensed Product + * with Synopsys or any supplement thereto. You are permitted to use and + * redistribute this Software in source and binary forms, with or without + * modification, provided that redistributions of source code must retain this + * notice. You may not view, use, disclose, copy or distribute this file or + * any information contained herein except pursuant to this license grant from + * Synopsys. If you do not agree with this notice, including the disclaimer + * below, then you are not authorized to use the Software. + * + * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * ========================================================================== */ + +#ifndef DWC_DEVICE_ONLY + +/** + * @file + * + * This file contains the implementation of the HCD. In Linux, the HCD + * implements the hc_driver API. + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/string.h> +#include <linux/dma-mapping.h> + +#include "dwc_otg_driver.h" +#include "dwc_otg_hcd.h" +#include "dwc_otg_regs.h" +extern atomic_t release_later; + +static u64 dma_mask = DMA_BIT_MASK(32); + +static const char dwc_otg_hcd_name[] = "dwc_otg_hcd"; + +static int dwc_otg_hcd_suspend(struct usb_hcd *hcd) +{ + /* FIXME: Write code to right suspend processing */ + return 0; +} + +static int dwc_otg_hcd_resume(struct usb_hcd *hcd) +{ + /* FIXME: Write code to right resume processing */ + return 0; +} + +static const struct hc_driver dwc_otg_hc_driver = +{ + .description = dwc_otg_hcd_name, + .product_desc = "DWC OTG Controller", + .hcd_priv_size = sizeof(dwc_otg_hcd_t), + .irq = dwc_otg_hcd_irq, + .flags = HCD_MEMORY | HCD_USB2, + //.reset = + .start = dwc_otg_hcd_start, +#ifdef CONFIG_PM + .bus_suspend = dwc_otg_hcd_suspend, + .bus_resume = dwc_otg_hcd_resume, +#endif + .stop = dwc_otg_hcd_stop, + .urb_enqueue = dwc_otg_hcd_urb_enqueue, + .urb_dequeue = dwc_otg_hcd_urb_dequeue, + .endpoint_disable = dwc_otg_hcd_endpoint_disable, + .get_frame_number = dwc_otg_hcd_get_frame_number, + .hub_status_data = dwc_otg_hcd_hub_status_data, + .hub_control = dwc_otg_hcd_hub_control, + //.hub_suspend = + //.hub_resume = +}; + + +/** + * Work queue function for starting the HCD when A-Cable is connected. + * The dwc_otg_hcd_start() must be called in a process context. + */ +static void hcd_start_func(struct work_struct *work) +{ + struct dwc_otg_hcd *priv = + container_of(work, struct dwc_otg_hcd, start_work); + struct usb_hcd *usb_hcd = (struct usb_hcd *)priv->_p; + DWC_DEBUGPL(DBG_HCDV, "%s() %p\n", __func__, usb_hcd); + if (usb_hcd) { + dwc_otg_hcd_start(usb_hcd); + } +} + + +/** + * HCD Callback function for starting the HCD when A-Cable is + * connected. + * + * @param _p void pointer to the <code>struct usb_hcd</code> + */ +static int32_t dwc_otg_hcd_start_cb(void *_p) +{ + dwc_otg_hcd_t * dwc_otg_hcd = hcd_to_dwc_otg_hcd(_p); + dwc_otg_core_if_t * core_if = dwc_otg_hcd->core_if; + hprt0_data_t hprt0; + if (core_if->op_state == B_HOST) { + /* + * Reset the port. During a HNP mode switch the reset + * needs to occur within 1ms and have a duration of at + * least 50ms. + */ + hprt0.d32 = dwc_otg_read_hprt0(core_if); + hprt0.b.prtrst = 1; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + ((struct usb_hcd *)_p)->self.is_b_host = 1; + } else { + ((struct usb_hcd *)_p)->self.is_b_host = 0; + } + /* Need to start the HCD in a non-interrupt context. */ + INIT_WORK(&dwc_otg_hcd->start_work, hcd_start_func); + dwc_otg_hcd->_p = _p; + schedule_work(&dwc_otg_hcd->start_work); + return 1; +} + + +/** + * HCD Callback function for stopping the HCD. + * + * @param _p void pointer to the <code>struct usb_hcd</code> + */ +static int32_t dwc_otg_hcd_stop_cb(void *_p) +{ + struct usb_hcd *usb_hcd = (struct usb_hcd *)_p; + DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, _p); + dwc_otg_hcd_stop(usb_hcd); + return 1; +} +static void del_xfer_timers(dwc_otg_hcd_t * _hcd) +{ + +#ifdef DEBUG + int i; + int num_channels = _hcd->core_if->core_params->host_channels; + for (i = 0; i < num_channels; i++) { + del_timer(&_hcd->core_if->hc_xfer_timer[i]); + } + +#endif /* */ +} +static void del_timers(dwc_otg_hcd_t * _hcd) +{ + del_xfer_timers(_hcd); + del_timer(&_hcd->conn_timer); +} + +/** + * Processes all the URBs in a single list of QHs. Completes them with + * -ETIMEDOUT and frees the QTD. + */ +static void kill_urbs_in_qh_list(dwc_otg_hcd_t * _hcd, + struct list_head *_qh_list) +{ + struct list_head *qh_item; + dwc_otg_qh_t * qh; + struct list_head *qtd_item; + dwc_otg_qtd_t * qtd; + list_for_each(qh_item, _qh_list) { + qh = list_entry(qh_item, dwc_otg_qh_t, qh_list_entry); + for (qtd_item = qh->qtd_list.next; qtd_item != &qh->qtd_list; + qtd_item = qh->qtd_list.next) { + qtd = list_entry(qtd_item, dwc_otg_qtd_t, qtd_list_entry); + if (qtd->urb != NULL) { + dwc_otg_hcd_complete_urb(_hcd, qtd->urb,-ETIMEDOUT); + } + dwc_otg_hcd_qtd_remove_and_free(qtd); + } + } +} + +/** + * Responds with an error status of ETIMEDOUT to all URBs in the non-periodic + * and periodic schedules. The QTD associated with each URB is removed from + * the schedule and freed. This function may be called when a disconnect is + * detected or when the HCD is being stopped. + */ +static void kill_all_urbs(dwc_otg_hcd_t * _hcd) +{ + kill_urbs_in_qh_list(_hcd, &_hcd->non_periodic_sched_deferred); + kill_urbs_in_qh_list(_hcd, &_hcd->non_periodic_sched_inactive); + kill_urbs_in_qh_list(_hcd, &_hcd->non_periodic_sched_active); + kill_urbs_in_qh_list(_hcd, &_hcd->periodic_sched_inactive); + kill_urbs_in_qh_list(_hcd, &_hcd->periodic_sched_ready); + kill_urbs_in_qh_list(_hcd, &_hcd->periodic_sched_assigned); + kill_urbs_in_qh_list(_hcd, &_hcd->periodic_sched_queued); +} + +/** + * HCD Callback function for disconnect of the HCD. + * + * @param _p void pointer to the <code>struct usb_hcd</code> + */ +static int32_t dwc_otg_hcd_disconnect_cb(void *_p) +{ + gintsts_data_t intr; + dwc_otg_hcd_t * dwc_otg_hcd = hcd_to_dwc_otg_hcd(_p); + + //DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, _p); + + /* + * Set status flags for the hub driver. + */ + dwc_otg_hcd->flags.b.port_connect_status_change = 1; + dwc_otg_hcd->flags.b.port_connect_status = 0; + + /* + * Shutdown any transfers in process by clearing the Tx FIFO Empty + * interrupt mask and status bits and disabling subsequent host + * channel interrupts. + */ + intr.d32 = 0; + intr.b.nptxfempty = 1; + intr.b.ptxfempty = 1; + intr.b.hcintr = 1; + dwc_modify_reg32(&dwc_otg_hcd->core_if->core_global_regs->gintmsk, + intr.d32, 0); + dwc_modify_reg32(&dwc_otg_hcd->core_if->core_global_regs->gintsts, + intr.d32, 0); + del_timers(dwc_otg_hcd); + + /* + * Turn off the vbus power only if the core has transitioned to device + * mode. If still in host mode, need to keep power on to detect a + * reconnection. + */ + if (dwc_otg_is_device_mode(dwc_otg_hcd->core_if)) { + if (dwc_otg_hcd->core_if->op_state != A_SUSPEND) { + hprt0_data_t hprt0 = {.d32 = 0}; + DWC_PRINT("Disconnect: PortPower off\n"); + hprt0.b.prtpwr = 0; + dwc_write_reg32(dwc_otg_hcd->core_if->host_if->hprt0, + hprt0.d32); + } + dwc_otg_disable_host_interrupts(dwc_otg_hcd->core_if); + } + + /* Respond with an error status to all URBs in the schedule. */ + kill_all_urbs(dwc_otg_hcd); + if (dwc_otg_is_host_mode(dwc_otg_hcd->core_if)) { + /* Clean up any host channels that were in use. */ + int num_channels; + int i; + dwc_hc_t * channel; + dwc_otg_hc_regs_t * hc_regs; + hcchar_data_t hcchar; + num_channels = dwc_otg_hcd->core_if->core_params->host_channels; + if (!dwc_otg_hcd->core_if->dma_enable) { + /* Flush out any channel requests in slave mode. */ + for (i = 0; i < num_channels; i++) { + channel = dwc_otg_hcd->hc_ptr_array[i]; + if (list_empty(&channel->hc_list_entry)) { + hc_regs = dwc_otg_hcd->core_if->host_if->hc_regs[i]; + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + if (hcchar.b.chen) { + hcchar.b.chen = 0; + hcchar.b.chdis = 1; + hcchar.b.epdir = 0; + dwc_write_reg32(&hc_regs->hcchar,hcchar.d32); + } + } + } + } + for (i = 0; i < num_channels; i++) { + channel = dwc_otg_hcd->hc_ptr_array[i]; + if (list_empty(&channel->hc_list_entry)) { + hc_regs = dwc_otg_hcd->core_if->host_if->hc_regs[i]; + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + if (hcchar.b.chen) { + /* Halt the channel. */ + hcchar.b.chdis = 1; + dwc_write_reg32(&hc_regs->hcchar,hcchar.d32); + } + dwc_otg_hc_cleanup(dwc_otg_hcd->core_if,channel); + list_add_tail(&channel->hc_list_entry, + &dwc_otg_hcd->free_hc_list); + } + } + } + + /* A disconnect will end the session so the B-Device is no + * longer a B-host. */ + ((struct usb_hcd *)_p)->self.is_b_host = 0; + return 1; +} + +/** + * Connection timeout function. An OTG host is required to display a + * message if the device does not connect within 10 seconds. + */ +void dwc_otg_hcd_connect_timeout(unsigned long _ptr) +{ + DWC_DEBUGPL(DBG_HCDV, "%s(%x)\n", __func__, (int)_ptr); + DWC_PRINT("Connect Timeout\n"); + DWC_ERROR("Device Not Connected/Responding\n"); +} + +/** + * Start the connection timer. An OTG host is required to display a + * message if the device does not connect within 10 seconds. The + * timer is deleted if a port connect interrupt occurs before the + * timer expires. + */ +static void dwc_otg_hcd_start_connect_timer(dwc_otg_hcd_t * _hcd) +{ + init_timer(&_hcd->conn_timer); + _hcd->conn_timer.function = dwc_otg_hcd_connect_timeout; + _hcd->conn_timer.data = (unsigned long)0; + _hcd->conn_timer.expires = jiffies + (HZ * 10); + add_timer(&_hcd->conn_timer); +} + +/** + * HCD Callback function for disconnect of the HCD. + * + * @param _p void pointer to the <code>struct usb_hcd</code> + */ +static int32_t dwc_otg_hcd_session_start_cb(void *_p) +{ + dwc_otg_hcd_t * dwc_otg_hcd = hcd_to_dwc_otg_hcd(_p); + DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, _p); + dwc_otg_hcd_start_connect_timer(dwc_otg_hcd); + return 1; +} + + +/** + * HCD Callback structure for handling mode switching. + */ +static dwc_otg_cil_callbacks_t hcd_cil_callbacks = +{ + .start = dwc_otg_hcd_start_cb, + .stop = dwc_otg_hcd_stop_cb, + .disconnect = dwc_otg_hcd_disconnect_cb, + .session_start = dwc_otg_hcd_session_start_cb, + .p = 0, +}; + + +/** + * Reset tasklet function + */ +static void reset_tasklet_func(unsigned long data) +{ + dwc_otg_hcd_t * dwc_otg_hcd = (dwc_otg_hcd_t *) data; + dwc_otg_core_if_t * core_if = dwc_otg_hcd->core_if; + hprt0_data_t hprt0; + DWC_DEBUGPL(DBG_HCDV, "USB RESET tasklet called\n"); + hprt0.d32 = dwc_otg_read_hprt0(core_if); + hprt0.b.prtrst = 1; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + mdelay(60); + hprt0.b.prtrst = 0; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + dwc_otg_hcd->flags.b.port_reset_change = 1; + return; +} +static struct tasklet_struct reset_tasklet = +{ + .next = NULL, + .state = 0, + .count = ATOMIC_INIT(0), + .func = reset_tasklet_func, + .data = 0, +}; + + +#ifdef OTG_PLB_DMA_TASKLET +/** + * plbdma tasklet function + */ +static void plbdma_tasklet_func(unsigned long data) +{ + unsigned long flags; + dwc_otg_core_if_t * _core_if = (dwc_otg_core_if_t *) data; + dma_xfer_t * dma_xfer = &_core_if->dma_xfer; + + local_irq_save(flags); + DWC_DEBUGPL(DBG_SP, "Plbdma tasklet called\n"); + + if (_core_if->dma_xfer.dma_dir == OTG_TX_DMA) { + if ((((unsigned long)dma_xfer->dma_data_buff) & 0x3) == 0) { + /* call tx_dma - src,dest,len,intr */ + ppc4xx_start_plb_dma(_core_if, (void *)dma_xfer->dma_data_buff, + dma_xfer->dma_data_fifo, (dma_xfer->dma_count * 4), PLB_DMA_INT_ENA, + PLB_DMA_CH, OTG_TX_DMA); + } else { + ppc4xx_start_plb_dma(_core_if, (void *)get_unaligned(dma_xfer->dma_data_buff), + dma_xfer->dma_data_fifo, (dma_xfer->dma_count * 4), PLB_DMA_INT_ENA, + PLB_DMA_CH, OTG_TX_DMA); + } + } + else { + DWC_DEBUGPL(DBG_HCD, "0x%p 0x%p %d\n", (void *)dma_xfer->dma_data_fifo, + dma_xfer->dma_data_buff, dma_xfer->dma_count ); + + ppc4xx_start_plb_dma(_core_if, (void *)dma_xfer->dma_data_fifo, + dma_xfer->dma_data_buff, (dma_xfer->dma_count * 4), PLB_DMA_INT_ENA, + PLB_DMA_CH, OTG_RX_DMA); + } + + local_irq_restore(flags); + return; +} +static struct tasklet_struct plbdma_tasklet = +{ + .next = NULL, + .state = 0, + .count = ATOMIC_INIT(0), + .func = plbdma_tasklet_func, + .data = 0, +}; + +#endif + +/** + * Initializes the HCD. This function allocates memory for and initializes the + * static parts of the usb_hcd and dwc_otg_hcd structures. It also registers the + * USB bus with the core and calls the hc_driver->start() function. It returns + * a negative error on failure. + */ +int __init dwc_otg_hcd_init(struct device *_dev, dwc_otg_device_t * dwc_otg_device) +{ + struct usb_hcd *hcd = NULL; + dwc_otg_hcd_t * dwc_otg_hcd = NULL; + dwc_otg_device_t * otg_dev = dev_get_drvdata(_dev); + int num_channels; + int i; + dwc_hc_t * channel; + int retval = 0; + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD INIT\n"); + /* + * Allocate memory for the base HCD plus the DWC OTG HCD. + * Initialize the base HCD. + */ + hcd = usb_create_hcd(&dwc_otg_hc_driver, _dev, dev_name(_dev)); + if (hcd == NULL) { + retval = -ENOMEM; + goto error1; + } + dev_set_drvdata(_dev, dwc_otg_device); /* fscz restore */ + hcd->regs = otg_dev->base; + hcd->self.otg_port = 1; + + /* Initialize the DWC OTG HCD. */ + dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); + dwc_otg_hcd->core_if = otg_dev->core_if; + otg_dev->hcd = dwc_otg_hcd; + /* Register the HCD CIL Callbacks */ + dwc_otg_cil_register_hcd_callbacks(otg_dev->core_if, + &hcd_cil_callbacks, hcd); + + /* Initialize the non-periodic schedule. */ + INIT_LIST_HEAD(&dwc_otg_hcd->non_periodic_sched_inactive); + INIT_LIST_HEAD(&dwc_otg_hcd->non_periodic_sched_active); + INIT_LIST_HEAD(&dwc_otg_hcd->non_periodic_sched_deferred); + + /* Initialize the periodic schedule. */ + INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_inactive); + INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_ready); + INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_assigned); + INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_queued); + + /* + * Create a host channel descriptor for each host channel implemented + * in the controller. Initialize the channel descriptor array. + */ + INIT_LIST_HEAD(&dwc_otg_hcd->free_hc_list); + num_channels = dwc_otg_hcd->core_if->core_params->host_channels; + for (i = 0; i < num_channels; i++) { + channel = kmalloc(sizeof(dwc_hc_t), GFP_KERNEL); + if (channel == NULL) { + retval = -ENOMEM; + DWC_ERROR("%s: host channel allocation failed\n",__func__); + goto error2; + } + memset(channel, 0, sizeof(dwc_hc_t)); + channel->hc_num = i; + dwc_otg_hcd->hc_ptr_array[i] = channel; + +#ifdef DEBUG + init_timer(&dwc_otg_hcd->core_if->hc_xfer_timer[i]); +#endif /* */ + DWC_DEBUGPL(DBG_HCDV, "HCD Added channel #%d, hc=%p\n", i,channel); + } + + /* Initialize the Connection timeout timer. */ + init_timer(&dwc_otg_hcd->conn_timer); + + /* Initialize reset tasklet. */ + reset_tasklet.data = (unsigned long)dwc_otg_hcd; + dwc_otg_hcd->reset_tasklet = &reset_tasklet; + +#ifdef OTG_PLB_DMA_TASKLET + /* Initialize plbdma tasklet. */ + plbdma_tasklet.data = (unsigned long)dwc_otg_hcd->core_if; + dwc_otg_hcd->core_if->plbdma_tasklet = &plbdma_tasklet; +#endif + + /* Set device flags indicating whether the HCD supports DMA. */ + if (otg_dev->core_if->dma_enable) { + DWC_PRINT("Using DMA mode\n"); + _dev->dma_mask = &dma_mask; + _dev->coherent_dma_mask = DMA_BIT_MASK(32); + } else { + DWC_PRINT("Using Slave mode\n"); + _dev->dma_mask = (void *)0; + _dev->coherent_dma_mask = 0; + } + /* + * Finish generic HCD initialization and start the HCD. This function + * allocates the DMA buffer pool, registers the USB bus, requests the + * IRQ line, and calls dwc_otg_hcd_start method. + */ + retval = usb_add_hcd(hcd, otg_dev->irq, IRQF_SHARED); + if (retval < 0) { + goto error2; + } + /* + * Allocate space for storing data on status transactions. Normally no + * data is sent, but this space acts as a bit bucket. This must be + * done after usb_add_hcd since that function allocates the DMA buffer + * pool. + */ + if (otg_dev->core_if->dma_enable) { + dwc_otg_hcd->status_buf = + dma_alloc_coherent(_dev, DWC_OTG_HCD_STATUS_BUF_SIZE, + &dwc_otg_hcd->status_buf_dma, GFP_KERNEL | GFP_DMA); + } else { + dwc_otg_hcd->status_buf = kmalloc(DWC_OTG_HCD_STATUS_BUF_SIZE, GFP_KERNEL); + } + if (dwc_otg_hcd->status_buf == NULL) { + retval = -ENOMEM; + DWC_ERROR("%s: status_buf allocation failed\n", __func__); + goto error3; + } + DWC_DEBUGPL(DBG_HCD, + "DWC OTG HCD Initialized HCD, bus=%s, usbbus=%d\n", + _dev->bus_id, hcd->self.busnum); + return 0; + + /* Error conditions */ + error3:usb_remove_hcd(hcd); + error2:dwc_otg_hcd_free(hcd); + usb_put_hcd(hcd); + error1:return retval; +} + + +/** + * Removes the HCD. + * Frees memory and resources associated with the HCD and deregisters the bus. + */ +void dwc_otg_hcd_remove(struct device *_dev) +{ + dwc_otg_device_t * otg_dev = dev_get_drvdata(_dev); + dwc_otg_hcd_t * dwc_otg_hcd = otg_dev->hcd; + struct usb_hcd *hcd = dwc_otg_hcd_to_hcd(dwc_otg_hcd); + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD REMOVE\n"); + + /* Turn off all interrupts */ + dwc_write_reg32(&dwc_otg_hcd->core_if->core_global_regs->gintmsk, 0); + dwc_modify_reg32(&dwc_otg_hcd->core_if->core_global_regs->gahbcfg, 1,0); + usb_remove_hcd(hcd); + dwc_otg_hcd_free(hcd); + usb_put_hcd(hcd); + return; +} + + +/* ========================================================================= + * Linux HC Driver Functions + * ========================================================================= */ + +/** + * Initializes dynamic portions of the DWC_otg HCD state. + */ +static void hcd_reinit(dwc_otg_hcd_t * _hcd) +{ + struct list_head *item; + int num_channels; + int i; + dwc_hc_t * channel; + _hcd->flags.d32 = 0; + _hcd->non_periodic_qh_ptr = &_hcd->non_periodic_sched_active; + _hcd->non_periodic_channels = 0; + _hcd->periodic_channels = 0; + + /* + * Put all channels in the free channel list and clean up channel + * states. + */ + item = _hcd->free_hc_list.next; + while (item != &_hcd->free_hc_list) { + list_del(item); + item = _hcd->free_hc_list.next; + } + num_channels = _hcd->core_if->core_params->host_channels; + for (i = 0; i < num_channels; i++) { + channel = _hcd->hc_ptr_array[i]; + list_add_tail(&channel->hc_list_entry, &_hcd->free_hc_list); + dwc_otg_hc_cleanup(_hcd->core_if, channel); + } + + /* Initialize the DWC core for host mode operation. */ + dwc_otg_core_host_init(_hcd->core_if); +} + + +/** Initializes the DWC_otg controller and its root hub and prepares it for host + * mode operation. Activates the root port. Returns 0 on success and a negative + * error code on failure. */ +int dwc_otg_hcd_start(struct usb_hcd *_hcd) +{ + dwc_otg_hcd_t * dwc_otg_hcd = hcd_to_dwc_otg_hcd(_hcd); + //dwc_otg_core_if_t * core_if = dwc_otg_hcd->core_if; + struct usb_device *udev; + struct usb_bus *bus; + +// int retval; + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD START\n"); + bus = hcd_to_bus(_hcd); + + /* Initialize the bus state. If the core is in Device Mode + * HALT the USB bus and return. */ + + _hcd->state = HC_STATE_RUNNING; + + /* Initialize and connect root hub if one is not already attached */ + if (bus->root_hub) { + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Has Root Hub\n"); + + /* Inform the HUB driver to resume. */ + usb_hcd_resume_root_hub(_hcd); + } + + else { + udev = usb_alloc_dev(NULL, bus, 0); + udev->speed = USB_SPEED_HIGH; + if (!udev) { + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Error udev alloc\n"); + return -ENODEV; + } + + /* Not needed - VJ + if ((retval = usb_hcd_register_root_hub(udev, _hcd)) != 0) { + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Error registering %d\n", retval); + return -ENODEV; + } + */ + } + hcd_reinit(dwc_otg_hcd); + return 0; +} +static void qh_list_free(dwc_otg_hcd_t * _hcd, struct list_head *_qh_list) +{ + struct list_head *item; + dwc_otg_qh_t * qh; + if (_qh_list->next == NULL) { + /* The list hasn't been initialized yet. */ + return; + } + + /* Ensure there are no QTDs or URBs left. */ + kill_urbs_in_qh_list(_hcd, _qh_list); + for (item = _qh_list->next; item != _qh_list; item = _qh_list->next) { + qh = list_entry(item, dwc_otg_qh_t, qh_list_entry); + dwc_otg_hcd_qh_remove_and_free(_hcd, qh); + } +} + + +/** + * Halts the DWC_otg host mode operations in a clean manner. USB transfers are + * stopped. + */ +void dwc_otg_hcd_stop(struct usb_hcd *_hcd) +{ + dwc_otg_hcd_t * dwc_otg_hcd = hcd_to_dwc_otg_hcd(_hcd); + hprt0_data_t hprt0 = {.d32 = 0}; + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD STOP\n"); + + /* Turn off all host-specific interrupts. */ + dwc_otg_disable_host_interrupts(dwc_otg_hcd->core_if); + + /* + * The root hub should be disconnected before this function is called. + * The disconnect will clear the QTD lists (via ..._hcd_urb_dequeue) + * and the QH lists (via ..._hcd_endpoint_disable). + */ + + /* Turn off the vbus power */ + DWC_PRINT("PortPower off\n"); + hprt0.b.prtpwr = 0; + dwc_write_reg32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0.d32); + return; +} + + +/** Returns the current frame number. */ +int dwc_otg_hcd_get_frame_number(struct usb_hcd *_hcd) +{ + dwc_otg_hcd_t * dwc_otg_hcd = hcd_to_dwc_otg_hcd(_hcd); + hfnum_data_t hfnum; + hfnum.d32 = dwc_read_reg32(&dwc_otg_hcd->core_if->host_if-> + host_global_regs->hfnum); + +#ifdef DEBUG_SOF + DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD GET FRAME NUMBER %d\n", + hfnum.b.frnum); +#endif /* */ + return hfnum.b.frnum; +} + + +/** + * Frees secondary storage associated with the dwc_otg_hcd structure contained + * in the struct usb_hcd field. + */ +void dwc_otg_hcd_free(struct usb_hcd *_hcd) +{ + dwc_otg_hcd_t * dwc_otg_hcd = hcd_to_dwc_otg_hcd(_hcd); + int i; + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD FREE\n"); + del_timers(dwc_otg_hcd); + + /* Free memory for QH/QTD lists */ + qh_list_free(dwc_otg_hcd, + &dwc_otg_hcd->non_periodic_sched_inactive); + qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_deferred); + qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_active); + qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_inactive); + qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_ready); + qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_assigned); + qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_queued); + + /* Free memory for the host channels. */ + for (i = 0; i < MAX_EPS_CHANNELS; i++) { + dwc_hc_t * hc = dwc_otg_hcd->hc_ptr_array[i]; + if (hc != NULL) { + DWC_DEBUGPL(DBG_HCDV, "HCD Free channel #%i, hc=%p\n",i, hc); + kfree(hc); + } + } + if (dwc_otg_hcd->core_if->dma_enable) { + if (dwc_otg_hcd->status_buf_dma) { + dma_free_coherent(_hcd->self.controller, + DWC_OTG_HCD_STATUS_BUF_SIZE, + dwc_otg_hcd->status_buf, + dwc_otg_hcd->status_buf_dma); + } + } else if (dwc_otg_hcd->status_buf != NULL) { + kfree(dwc_otg_hcd->status_buf); + } + return; +} + + +#ifdef DEBUG +static void dump_urb_info(struct urb *_urb, char *_fn_name) +{ + DWC_PRINT("%s, urb %p\n", _fn_name, _urb); + DWC_PRINT(" Device address: %d\n", usb_pipedevice(_urb->pipe)); + DWC_PRINT(" Endpoint: %d, %s\n", usb_pipeendpoint(_urb->pipe), + (usb_pipein(_urb->pipe) ? "IN" : "OUT")); + DWC_PRINT(" Endpoint type: %s\n", ( { + char *pipetype; + switch (usb_pipetype(_urb->pipe)) { + case PIPE_CONTROL: + pipetype = "CONTROL"; break; + case PIPE_BULK: + pipetype = "BULK"; break; + case PIPE_INTERRUPT: + pipetype = "INTERRUPT"; break; + case PIPE_ISOCHRONOUS: + pipetype = "ISOCHRONOUS"; break; + default: + pipetype = "UNKNOWN"; break; + }; + pipetype; + } )) ; + DWC_PRINT(" Speed: %s\n", ( { + char *speed; + switch (_urb->dev->speed) { + case USB_SPEED_HIGH: + speed = "HIGH"; break; + case USB_SPEED_FULL: + speed = "FULL"; break; + case USB_SPEED_LOW: + speed = "LOW"; break; + default: + speed = "UNKNOWN"; break; + }; + speed; + } )) ; + DWC_PRINT(" Max packet size: %d\n", + usb_maxpacket(_urb->dev, _urb->pipe, usb_pipeout(_urb->pipe))); + DWC_PRINT(" Data buffer length: %d\n", _urb->transfer_buffer_length); + DWC_PRINT(" Transfer buffer: %p, Transfer DMA: %p\n", + _urb->transfer_buffer, (void *)_urb->transfer_dma); + DWC_PRINT(" Setup buffer: %p, Setup DMA: %p\n", _urb->setup_packet, + (void *)_urb->setup_dma); + DWC_PRINT(" Interval: %d\n", _urb->interval); + if (usb_pipetype(_urb->pipe) == PIPE_ISOCHRONOUS) { + int i; + for (i = 0; i < _urb->number_of_packets; i++) { + DWC_PRINT(" ISO Desc %d:\n", i); + DWC_PRINT(" offset: %d, length %d\n", + _urb->iso_frame_desc[i].offset, + _urb->iso_frame_desc[i].length); + } + } +} +static void dump_channel_info(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * qh) +{ + if (qh->channel != NULL) { + dwc_hc_t * hc = qh->channel; + struct list_head *item; + dwc_otg_qh_t * qh_item; + int num_channels = _hcd->core_if->core_params->host_channels; + int i; + dwc_otg_hc_regs_t * hc_regs; + hcchar_data_t hcchar; + hcsplt_data_t hcsplt; + hctsiz_data_t hctsiz; + uint32_t hcdma; + hc_regs = _hcd->core_if->host_if->hc_regs[hc->hc_num]; + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + hcsplt.d32 = dwc_read_reg32(&hc_regs->hcsplt); + hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz); + hcdma = dwc_read_reg32(&hc_regs->hcdma); + DWC_PRINT(" Assigned to channel %p:\n", hc); + DWC_PRINT(" hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, hcsplt.d32); + DWC_PRINT(" hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32, hcdma); + DWC_PRINT(" dev_addr: %d, ep_num: %d, ep_is_in: %d\n", + hc->dev_addr, hc->ep_num, hc->ep_is_in); + DWC_PRINT(" ep_type: %d\n", hc->ep_type); + DWC_PRINT(" max_packet: %d\n", hc->max_packet); + DWC_PRINT(" data_pid_start: %d\n", hc->data_pid_start); + DWC_PRINT(" xfer_started: %d\n", hc->xfer_started); + DWC_PRINT(" halt_status: %d\n", hc->halt_status); + DWC_PRINT(" xfer_buff: %p\n", hc->xfer_buff); + DWC_PRINT(" xfer_len: %d\n", hc->xfer_len); + DWC_PRINT(" qh: %p\n", hc->qh); + DWC_PRINT(" NP inactive sched:\n"); + list_for_each(item, &_hcd->non_periodic_sched_inactive) { + qh_item = list_entry(item, dwc_otg_qh_t, qh_list_entry); + DWC_PRINT(" %p\n", qh_item); + } DWC_PRINT(" NP active sched:\n"); + list_for_each(item, &_hcd->non_periodic_sched_deferred) { + qh_item = list_entry(item, dwc_otg_qh_t, qh_list_entry); + DWC_PRINT(" %p\n", qh_item); + } DWC_PRINT(" NP deferred sched:\n"); + list_for_each(item, &_hcd->non_periodic_sched_active) { + qh_item = list_entry(item, dwc_otg_qh_t, qh_list_entry); + DWC_PRINT(" %p\n", qh_item); + } DWC_PRINT(" Channels: \n"); + for (i = 0; i < num_channels; i++) { + dwc_hc_t * hc = _hcd->hc_ptr_array[i]; + DWC_PRINT(" %2d: %p\n", i, hc); + } + } +} + +#endif /* */ + +/** Starts processing a USB transfer request specified by a USB Request Block + * (URB). mem_flags indicates the type of memory allocation to use while + * processing this URB. */ +int dwc_otg_hcd_urb_enqueue(struct usb_hcd *_hcd, + struct urb *_urb, + gfp_t _mem_flags) +{ + unsigned long flags; + int retval; + dwc_otg_hcd_t * dwc_otg_hcd = hcd_to_dwc_otg_hcd(_hcd); + dwc_otg_qtd_t * qtd; + + local_irq_save(flags); + retval = usb_hcd_link_urb_to_ep(_hcd, _urb); + if (retval) { + local_irq_restore(flags); + return retval; + } +#ifdef DEBUG + if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { + dump_urb_info(_urb, "dwc_otg_hcd_urb_enqueue"); + } +#endif /* */ + if (!dwc_otg_hcd->flags.b.port_connect_status) { + /* No longer connected. */ + local_irq_restore(flags); + return -ENODEV; + } + qtd = dwc_otg_hcd_qtd_create(_urb); + if (qtd == NULL) { + local_irq_restore(flags); + DWC_ERROR("DWC OTG HCD URB Enqueue failed creating QTD\n"); + return -ENOMEM; + } + retval = dwc_otg_hcd_qtd_add(qtd, dwc_otg_hcd); + if (retval < 0) { + DWC_ERROR("DWC OTG HCD URB Enqueue failed adding QTD. " + "Error status %d\n", retval); + dwc_otg_hcd_qtd_free(qtd); + } + local_irq_restore(flags); + return retval; +} + + +/** Aborts/cancels a USB transfer request. Always returns 0 to indicate + * success. */ +int dwc_otg_hcd_urb_dequeue(struct usb_hcd *_hcd, struct urb *_urb, int _status) +{ + unsigned long flags; + dwc_otg_hcd_t * dwc_otg_hcd; + dwc_otg_qtd_t * urb_qtd; + dwc_otg_qh_t * qh; + int retval; + + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Dequeue\n"); + local_irq_save(flags); + retval = usb_hcd_check_unlink_urb(_hcd, _urb, _status); + if (retval) { + local_irq_restore(flags); + return retval; + } + + dwc_otg_hcd = hcd_to_dwc_otg_hcd(_hcd); + + urb_qtd = (dwc_otg_qtd_t *) _urb->hcpriv; + if (urb_qtd == NULL) { + printk("urb_qtd is NULL for _urb %08x\n",(unsigned)_urb); + goto done; + } + qh = (dwc_otg_qh_t *) urb_qtd->qtd_qh_ptr; + if (qh == NULL) { + goto done; + } +#ifdef DEBUG + if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { + dump_urb_info(_urb, "dwc_otg_hcd_urb_dequeue"); + if (urb_qtd == qh->qtd_in_process) { + dump_channel_info(dwc_otg_hcd, qh); + } + } + +#endif /* */ + if (urb_qtd == qh->qtd_in_process) { + /* The QTD is in process (it has been assigned to a channel). */ + if (dwc_otg_hcd->flags.b.port_connect_status) { + + /* + * If still connected (i.e. in host mode), halt the + * channel so it can be used for other transfers. If + * no longer connected, the host registers can't be + * written to halt the channel since the core is in + * device mode. + */ + dwc_otg_hc_halt(dwc_otg_hcd->core_if, qh->channel, + DWC_OTG_HC_XFER_URB_DEQUEUE); + } + } + + /* + * Free the QTD and clean up the associated QH. Leave the QH in the + * schedule if it has any remaining QTDs. + */ + dwc_otg_hcd_qtd_remove_and_free(urb_qtd); + if (urb_qtd == qh->qtd_in_process) { + dwc_otg_hcd_qh_deactivate(dwc_otg_hcd, qh, 0); + qh->channel = NULL; + qh->qtd_in_process = NULL; + } else if (list_empty(&qh->qtd_list)) { + dwc_otg_hcd_qh_remove(dwc_otg_hcd, qh); + } +done: + local_irq_restore(flags); + _urb->hcpriv = NULL; + + /* Higher layer software sets URB status. */ +#if 1 /* Fixed bug relate kernel hung when unplug cable */ + usb_hcd_unlink_urb_from_ep(_hcd, _urb); + usb_hcd_giveback_urb(_hcd, _urb, _status); + if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { + DWC_PRINT("Called usb_hcd_giveback_urb()\n"); + DWC_PRINT(" urb->status = %d\n", _status); + } +#else + if (_status != -ECONNRESET) { + usb_hcd_unlink_urb_from_ep(_hcd, _urb); + usb_hcd_giveback_urb(_hcd, _urb, _status); + if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { + DWC_PRINT("Called usb_hcd_giveback_urb()\n"); + DWC_PRINT(" urb->status = %d\n", _status); + } + } +#endif + return 0; +} + + +/** Frees resources in the DWC_otg controller related to a given endpoint. Also + * clears state in the HCD related to the endpoint. Any URBs for the endpoint + * must already be dequeued. */ +void dwc_otg_hcd_endpoint_disable(struct usb_hcd *_hcd, + struct usb_host_endpoint *_ep) +{ + dwc_otg_qh_t * qh; + dwc_otg_hcd_t * dwc_otg_hcd = hcd_to_dwc_otg_hcd(_hcd); + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD EP DISABLE: _bEndpointAddress=0x%02x, " + "endpoint=%d\n", _ep->desc.bEndpointAddress, + dwc_ep_addr_to_endpoint(_ep->desc.bEndpointAddress)); + qh = (dwc_otg_qh_t *) (_ep->hcpriv); + if (qh != NULL) { + +#ifdef DEBUG + /** Check that the QTD list is really empty */ + if (!list_empty(&qh->qtd_list)) { + DWC_WARN("DWC OTG HCD EP DISABLE:" + " QTD List for this endpoint is not empty\n"); + } + +#endif /* */ + dwc_otg_hcd_qh_remove_and_free(dwc_otg_hcd, qh); + _ep->hcpriv = NULL; + } + return; +} + +extern int fscz_debug; +/** Handles host mode interrupts for the DWC_otg controller. Returns IRQ_NONE if + * there was no interrupt to handle. Returns IRQ_HANDLED if there was a valid + * interrupt. + * + * This function is called by the USB core when an interrupt occurs */ +irqreturn_t dwc_otg_hcd_irq(struct usb_hcd * _hcd) +{ + dwc_otg_hcd_t * dwc_otg_hcd = hcd_to_dwc_otg_hcd(_hcd); + return IRQ_RETVAL(dwc_otg_hcd_handle_intr(dwc_otg_hcd)); +} + +/** Creates Status Change bitmap for the root hub and root port. The bitmap is + * returned in buf. Bit 0 is the status change indicator for the root hub. Bit 1 + * is the status change indicator for the single root port. Returns 1 if either + * change indicator is 1, otherwise returns 0. */ +int dwc_otg_hcd_hub_status_data(struct usb_hcd *_hcd, char *_buf) +{ + dwc_otg_hcd_t * dwc_otg_hcd = hcd_to_dwc_otg_hcd(_hcd); + _buf[0] = 0; + _buf[0] |= (dwc_otg_hcd->flags.b.port_connect_status_change + || dwc_otg_hcd->flags.b.port_reset_change + || dwc_otg_hcd->flags.b.port_enable_change + || dwc_otg_hcd->flags.b.port_suspend_change + || dwc_otg_hcd->flags.b.port_over_current_change) << 1; + +#ifdef DEBUG + if (_buf[0]) { + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB STATUS DATA:" + " Root port status changed\n"); + DWC_DEBUGPL(DBG_HCDV, " port_connect_status_change: %d\n", + dwc_otg_hcd->flags.b.port_connect_status_change); + DWC_DEBUGPL(DBG_HCDV, " port_reset_change: %d\n", + dwc_otg_hcd->flags.b.port_reset_change); + DWC_DEBUGPL(DBG_HCDV, " port_enable_change: %d\n", + dwc_otg_hcd->flags.b.port_enable_change); + DWC_DEBUGPL(DBG_HCDV, " port_suspend_change: %d\n", + dwc_otg_hcd->flags.b.port_suspend_change); + DWC_DEBUGPL(DBG_HCDV, " port_over_current_change: %d\n", + dwc_otg_hcd->flags.b.port_over_current_change); + } + +#endif /* */ + return (_buf[0] != 0); +} + + +#ifdef DWC_HS_ELECT_TST +/* + * Quick and dirty hack to implement the HS Electrical Test + * SINGLE_STEP_GET_DEVICE_DESCRIPTOR feature. + * + * This code was copied from our userspace app "hset". It sends a + * Get Device Descriptor control sequence in two parts, first the + * Setup packet by itself, followed some time later by the In and + * Ack packets. Rather than trying to figure out how to add this + * functionality to the normal driver code, we just hijack the + * hardware, using these two function to drive the hardware + * directly. + */ +dwc_otg_core_global_regs_t * global_regs; +dwc_otg_host_global_regs_t * hc_global_regs; +dwc_otg_hc_regs_t * hc_regs; +uint32_t * data_fifo; + +static void do_setup(void) +{ + gintsts_data_t gintsts; + hctsiz_data_t hctsiz; + hcchar_data_t hcchar; + haint_data_t haint; + hcint_data_t hcint; + + /* Enable HAINTs */ + dwc_write_reg32(&hc_global_regs->haintmsk, 0x0001); + + /* Enable HCINTs */ + dwc_write_reg32(&hc_regs->hcintmsk, 0x04a3); + + /* Read GINTSTS */ + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); + + /* Read HAINT */ + haint.d32 = dwc_read_reg32(&hc_global_regs->haint); + + //fprintf(stderr, "HAINT: %08x\n", haint.d32); + + /* Read HCINT */ + hcint.d32 = dwc_read_reg32(&hc_regs->hcint); + + //fprintf(stderr, "HCINT: %08x\n", hcint.d32); + + /* Read HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + + //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); + + /* Clear HCINT */ + dwc_write_reg32(&hc_regs->hcint, hcint.d32); + + /* Clear HAINT */ + dwc_write_reg32(&hc_global_regs->haint, haint.d32); + + /* Clear GINTSTS */ + dwc_write_reg32(&global_regs->gintsts, gintsts.d32); + + /* Read GINTSTS */ + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); + + /* + * Send Setup packet (Get Device Descriptor) + */ + + /* Make sure channel is disabled */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + if (hcchar.b.chen) { + + //fprintf(stderr, "Channel already enabled 1, HCCHAR = %08x\n", hcchar.d32); + hcchar.b.chdis = 1; + +// hcchar.b.chen = 1; + dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); + + //sleep(1); + mdelay(1000); + + /* Read GINTSTS */ + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); + + /* Read HAINT */ + haint.d32 = dwc_read_reg32(&hc_global_regs->haint); + + //fprintf(stderr, "HAINT: %08x\n", haint.d32); + + /* Read HCINT */ + hcint.d32 = dwc_read_reg32(&hc_regs->hcint); + + //fprintf(stderr, "HCINT: %08x\n", hcint.d32); + + /* Read HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + + //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); + + /* Clear HCINT */ + dwc_write_reg32(&hc_regs->hcint, hcint.d32); + + /* Clear HAINT */ + dwc_write_reg32(&hc_global_regs->haint, haint.d32); + + /* Clear GINTSTS */ + dwc_write_reg32(&global_regs->gintsts, gintsts.d32); + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + + //if (hcchar.b.chen) { + // fprintf(stderr, "** Channel _still_ enabled 1, HCCHAR = %08x **\n", hcchar.d32); + //} + } + + /* Set HCTSIZ */ + hctsiz.d32 = 0; + hctsiz.b.xfersize = 8; + hctsiz.b.pktcnt = 1; + hctsiz.b.pid = DWC_OTG_HC_PID_SETUP; + dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32); + + /* Set HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL; + hcchar.b.epdir = 0; + hcchar.b.epnum = 0; + hcchar.b.mps = 8; + hcchar.b.chen = 1; + dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); + + /* Fill FIFO with Setup data for Get Device Descriptor */ + data_fifo = (uint32_t *) ((char *)global_regs + 0x1000); + dwc_write_reg32(data_fifo++, 0x01000680); + dwc_write_reg32(data_fifo++, 0x00080000); + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + + //fprintf(stderr, "Waiting for HCINTR intr 1, GINTSTS = %08x\n", gintsts.d32); + + /* Wait for host channel interrupt */ + do { + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + } while (gintsts.b.hcintr == 0); + + //fprintf(stderr, "Got HCINTR intr 1, GINTSTS = %08x\n", gintsts.d32); + + /* Disable HCINTs */ + dwc_write_reg32(&hc_regs->hcintmsk, 0x0000); + + /* Disable HAINTs */ + dwc_write_reg32(&hc_global_regs->haintmsk, 0x0000); + + /* Read HAINT */ + haint.d32 = dwc_read_reg32(&hc_global_regs->haint); + + //fprintf(stderr, "HAINT: %08x\n", haint.d32); + + /* Read HCINT */ + hcint.d32 = dwc_read_reg32(&hc_regs->hcint); + + //fprintf(stderr, "HCINT: %08x\n", hcint.d32); + + /* Read HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + + //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); + + /* Clear HCINT */ + dwc_write_reg32(&hc_regs->hcint, hcint.d32); + + /* Clear HAINT */ + dwc_write_reg32(&hc_global_regs->haint, haint.d32); + + /* Clear GINTSTS */ + dwc_write_reg32(&global_regs->gintsts, gintsts.d32); + + /* Read GINTSTS */ + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); +} + +static void do_in_ack(void) +{ + gintsts_data_t gintsts; + hctsiz_data_t hctsiz; + hcchar_data_t hcchar; + haint_data_t haint; + hcint_data_t hcint; + host_grxsts_data_t grxsts; + + /* Enable HAINTs */ + dwc_write_reg32(&hc_global_regs->haintmsk, 0x0001); + + /* Enable HCINTs */ + dwc_write_reg32(&hc_regs->hcintmsk, 0x04a3); + + /* Read GINTSTS */ + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); + + /* Read HAINT */ + haint.d32 = dwc_read_reg32(&hc_global_regs->haint); + + //fprintf(stderr, "HAINT: %08x\n", haint.d32); + + /* Read HCINT */ + hcint.d32 = dwc_read_reg32(&hc_regs->hcint); + + //fprintf(stderr, "HCINT: %08x\n", hcint.d32); + + /* Read HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + + //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); + + /* Clear HCINT */ + dwc_write_reg32(&hc_regs->hcint, hcint.d32); + + /* Clear HAINT */ + dwc_write_reg32(&hc_global_regs->haint, haint.d32); + + /* Clear GINTSTS */ + dwc_write_reg32(&global_regs->gintsts, gintsts.d32); + + /* Read GINTSTS */ + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); + + /* + * Receive Control In packet + */ + + /* Make sure channel is disabled */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + + if (hcchar.b.chen) { + //fprintf(stderr, "Channel already enabled 2, HCCHAR = %08x\n", hcchar.d32); + hcchar.b.chdis = 1; + hcchar.b.chen = 1; + dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); + + //sleep(1); + mdelay(1000); + + /* Read GINTSTS */ + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); + + /* Read HAINT */ + haint.d32 = dwc_read_reg32(&hc_global_regs->haint); + + //fprintf(stderr, "HAINT: %08x\n", haint.d32); + + /* Read HCINT */ + hcint.d32 = dwc_read_reg32(&hc_regs->hcint); + + //fprintf(stderr, "HCINT: %08x\n", hcint.d32); + + /* Read HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + + //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); + + /* Clear HCINT */ + dwc_write_reg32(&hc_regs->hcint, hcint.d32); + + /* Clear HAINT */ + dwc_write_reg32(&hc_global_regs->haint, haint.d32); + + /* Clear GINTSTS */ + dwc_write_reg32(&global_regs->gintsts, gintsts.d32); + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + + //if (hcchar.b.chen) { + // fprintf(stderr, "** Channel _still_ enabled 2, HCCHAR = %08x **\n", hcchar.d32); + //} + } + + /* Set HCTSIZ */ + hctsiz.d32 = 0; + hctsiz.b.xfersize = 8; + hctsiz.b.pktcnt = 1; + hctsiz.b.pid = DWC_OTG_HC_PID_DATA1; + dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32); + + /* Set HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL; + hcchar.b.epdir = 1; + hcchar.b.epnum = 0; + hcchar.b.mps = 8; + hcchar.b.chen = 1; + dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + + //fprintf(stderr, "Waiting for RXSTSQLVL intr 1, GINTSTS = %08x\n", gintsts.d32); + + /* Wait for receive status queue interrupt */ + do { + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + } while (gintsts.b.rxstsqlvl == 0); + + //fprintf(stderr, "Got RXSTSQLVL intr 1, GINTSTS = %08x\n", gintsts.d32); + + /* Read RXSTS */ + grxsts.d32 = dwc_read_reg32(&global_regs->grxstsp); + + //fprintf(stderr, "GRXSTS: %08x\n", grxsts.d32); + + /* Clear RXSTSQLVL in GINTSTS */ + gintsts.d32 = 0; + gintsts.b.rxstsqlvl = 1; + dwc_write_reg32(&global_regs->gintsts, gintsts.d32); + switch (grxsts.b.pktsts) { + case DWC_GRXSTS_PKTSTS_IN: + /* Read the data into the host buffer */ + if (grxsts.b.bcnt > 0) { + int i; + int word_count = (grxsts.b.bcnt + 3) / 4; + data_fifo = (uint32_t *) ((char *)global_regs + 0x1000); + for (i = 0; i < word_count; i++) { + (void)dwc_read_reg32(data_fifo++); + } + } + //fprintf(stderr, "Received %u bytes\n", (unsigned)grxsts.b.bcnt); + break; + default: + //fprintf(stderr, "** Unexpected GRXSTS packet status 1 **\n"); + break; + } + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + + //fprintf(stderr, "Waiting for RXSTSQLVL intr 2, GINTSTS = %08x\n", gintsts.d32); + + /* Wait for receive status queue interrupt */ + do { + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + } while (gintsts.b.rxstsqlvl == 0); + + //fprintf(stderr, "Got RXSTSQLVL intr 2, GINTSTS = %08x\n", gintsts.d32); + + /* Read RXSTS */ + grxsts.d32 = dwc_read_reg32(&global_regs->grxstsp); + + //fprintf(stderr, "GRXSTS: %08x\n", grxsts.d32); + + /* Clear RXSTSQLVL in GINTSTS */ + gintsts.d32 = 0; + gintsts.b.rxstsqlvl = 1; + dwc_write_reg32(&global_regs->gintsts, gintsts.d32); + switch (grxsts.b.pktsts) { + case DWC_GRXSTS_PKTSTS_IN_XFER_COMP: + break; + default: + //fprintf(stderr, "** Unexpected GRXSTS packet status 2 **\n"); + break; + } + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + + //fprintf(stderr, "Waiting for HCINTR intr 2, GINTSTS = %08x\n", gintsts.d32); + + /* Wait for host channel interrupt */ + do { + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + } while (gintsts.b.hcintr == 0); + + //fprintf(stderr, "Got HCINTR intr 2, GINTSTS = %08x\n", gintsts.d32); + + /* Read HAINT */ + haint.d32 = dwc_read_reg32(&hc_global_regs->haint); + + //fprintf(stderr, "HAINT: %08x\n", haint.d32); + + /* Read HCINT */ + hcint.d32 = dwc_read_reg32(&hc_regs->hcint); + + //fprintf(stderr, "HCINT: %08x\n", hcint.d32); + + /* Read HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + + //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); + + /* Clear HCINT */ + dwc_write_reg32(&hc_regs->hcint, hcint.d32); + + /* Clear HAINT */ + dwc_write_reg32(&hc_global_regs->haint, haint.d32); + + /* Clear GINTSTS */ + dwc_write_reg32(&global_regs->gintsts, gintsts.d32); + + /* Read GINTSTS */ + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); + + // usleep(100000); + // mdelay(100); + mdelay(1); + + /* + * Send handshake packet + */ + + /* Read HAINT */ + haint.d32 = dwc_read_reg32(&hc_global_regs->haint); + + //fprintf(stderr, "HAINT: %08x\n", haint.d32); + + /* Read HCINT */ + hcint.d32 = dwc_read_reg32(&hc_regs->hcint); + + //fprintf(stderr, "HCINT: %08x\n", hcint.d32); + + /* Read HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + + //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); + + /* Clear HCINT */ + dwc_write_reg32(&hc_regs->hcint, hcint.d32); + + /* Clear HAINT */ + dwc_write_reg32(&hc_global_regs->haint, haint.d32); + + /* Clear GINTSTS */ + dwc_write_reg32(&global_regs->gintsts, gintsts.d32); + + /* Read GINTSTS */ + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); + + /* Make sure channel is disabled */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + if (hcchar.b.chen) { + + //fprintf(stderr, "Channel already enabled 3, HCCHAR = %08x\n", hcchar.d32); + hcchar.b.chdis = 1; + hcchar.b.chen = 1; + dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); + + //sleep(1); + mdelay(1000); + + /* Read GINTSTS */ + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); + + /* Read HAINT */ + haint.d32 = dwc_read_reg32(&hc_global_regs->haint); + + //fprintf(stderr, "HAINT: %08x\n", haint.d32); + + /* Read HCINT */ + hcint.d32 = dwc_read_reg32(&hc_regs->hcint); + + //fprintf(stderr, "HCINT: %08x\n", hcint.d32); + + /* Read HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + + //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); + + /* Clear HCINT */ + dwc_write_reg32(&hc_regs->hcint, hcint.d32); + + /* Clear HAINT */ + dwc_write_reg32(&hc_global_regs->haint, haint.d32); + + /* Clear GINTSTS */ + dwc_write_reg32(&global_regs->gintsts, gintsts.d32); + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + + //if (hcchar.b.chen) { + // fprintf(stderr, "** Channel _still_ enabled 3, HCCHAR = %08x **\n", hcchar.d32); + //} + } + + /* Set HCTSIZ */ + hctsiz.d32 = 0; + hctsiz.b.xfersize = 0; + hctsiz.b.pktcnt = 1; + hctsiz.b.pid = DWC_OTG_HC_PID_DATA1; + dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32); + + /* Set HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL; + hcchar.b.epdir = 0; + hcchar.b.epnum = 0; + hcchar.b.mps = 8; + hcchar.b.chen = 1; + dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + + //fprintf(stderr, "Waiting for HCINTR intr 3, GINTSTS = %08x\n", gintsts.d32); + + /* Wait for host channel interrupt */ + do { + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + } while (gintsts.b.hcintr == 0); + + //fprintf(stderr, "Got HCINTR intr 3, GINTSTS = %08x\n", gintsts.d32); + + /* Disable HCINTs */ + dwc_write_reg32(&hc_regs->hcintmsk, 0x0000); + + /* Disable HAINTs */ + dwc_write_reg32(&hc_global_regs->haintmsk, 0x0000); + + /* Read HAINT */ + haint.d32 = dwc_read_reg32(&hc_global_regs->haint); + + //fprintf(stderr, "HAINT: %08x\n", haint.d32); + + /* Read HCINT */ + hcint.d32 = dwc_read_reg32(&hc_regs->hcint); + + //fprintf(stderr, "HCINT: %08x\n", hcint.d32); + + /* Read HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + + //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); + + /* Clear HCINT */ + dwc_write_reg32(&hc_regs->hcint, hcint.d32); + + /* Clear HAINT */ + dwc_write_reg32(&hc_global_regs->haint, haint.d32); + + /* Clear GINTSTS */ + dwc_write_reg32(&global_regs->gintsts, gintsts.d32); + + /* Read GINTSTS */ + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); +} + +#endif /* DWC_HS_ELECT_TST */ + +/** Handles hub class-specific requests.*/ +int dwc_otg_hcd_hub_control(struct usb_hcd *_hcd, u16 _typeReq, u16 _wValue, + u16 _wIndex, char *_buf, u16 _wLength) +{ + int retval = 0; + dwc_otg_hcd_t * dwc_otg_hcd = hcd_to_dwc_otg_hcd(_hcd); + dwc_otg_core_if_t * core_if = hcd_to_dwc_otg_hcd(_hcd)->core_if; + struct usb_hub_descriptor *desc; + hprt0_data_t hprt0 = {.d32 = 0}; + uint32_t port_status; + switch (_typeReq) { + case ClearHubFeature: + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "ClearHubFeature 0x%x\n", _wValue); + switch (_wValue) { + case C_HUB_LOCAL_POWER: + case C_HUB_OVER_CURRENT: + /* Nothing required here */ + break; + default: + retval = -EINVAL; + DWC_ERROR("DWC OTG HCD - ClearHubFeature request %xh unknown\n", + _wValue); + } + break; + case ClearPortFeature: + if (!_wIndex || _wIndex > 1) + goto error; + switch (_wValue) { + case USB_PORT_FEAT_ENABLE: + DWC_DEBUGPL(DBG_ANY, "DWC OTG HCD HUB CONTROL - " + "ClearPortFeature USB_PORT_FEAT_ENABLE\n"); + hprt0.d32 = dwc_otg_read_hprt0(core_if); + hprt0.b.prtena = 1; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + break; + case USB_PORT_FEAT_SUSPEND: + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "ClearPortFeature USB_PORT_FEAT_SUSPEND\n"); + hprt0.d32 = dwc_otg_read_hprt0(core_if); + hprt0.b.prtres = 1; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + + /* Clear Resume bit */ + mdelay(100); + hprt0.b.prtres = 0; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + break; + case USB_PORT_FEAT_POWER: + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "ClearPortFeature USB_PORT_FEAT_POWER\n"); + hprt0.d32 = dwc_otg_read_hprt0(core_if); + hprt0.b.prtpwr = 0; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + break; + case USB_PORT_FEAT_INDICATOR: + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "ClearPortFeature USB_PORT_FEAT_INDICATOR\n"); + + /* Port inidicator not supported */ + break; + case USB_PORT_FEAT_C_CONNECTION: + /* Clears drivers internal connect status change + * flag */ + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "ClearPortFeature USB_PORT_FEAT_C_CONNECTION\n"); + dwc_otg_hcd->flags.b.port_connect_status_change = 0; + break; + case USB_PORT_FEAT_C_RESET: + /* Clears the driver's internal Port Reset Change + * flag */ + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "ClearPortFeature USB_PORT_FEAT_C_RESET\n"); + dwc_otg_hcd->flags.b.port_reset_change = 0; + break; + case USB_PORT_FEAT_C_ENABLE: + /* Clears the driver's internal Port + * Enable/Disable Change flag */ + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "ClearPortFeature USB_PORT_FEAT_C_ENABLE\n"); + dwc_otg_hcd->flags.b.port_enable_change = 0; + break; + case USB_PORT_FEAT_C_SUSPEND: + /* Clears the driver's internal Port Suspend + * Change flag, which is set when resume signaling on + * the host port is complete */ + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "ClearPortFeature USB_PORT_FEAT_C_SUSPEND\n"); + dwc_otg_hcd->flags.b.port_suspend_change = 0; + break; + case USB_PORT_FEAT_C_OVER_CURRENT: + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "ClearPortFeature USB_PORT_FEAT_C_OVER_CURRENT\n"); + dwc_otg_hcd->flags.b.port_over_current_change = 0; + break; + default: + retval = -EINVAL; + DWC_ERROR("DWC OTG HCD - " + "ClearPortFeature request %xh " + "unknown or unsupported\n", _wValue); + } + break; + case GetHubDescriptor: + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "GetHubDescriptor\n"); + desc = (struct usb_hub_descriptor *)_buf; + desc->bDescLength = 9; + desc->bDescriptorType = 0x29; + desc->bNbrPorts = 1; + desc->wHubCharacteristics = 0x08; + desc->bPwrOn2PwrGood = 1; + desc->bHubContrCurrent = 0; + desc->bitmap[0] = 0; + desc->bitmap[1] = 0xff; + break; + case GetHubStatus: + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "GetHubStatus\n"); + memset(_buf, 0, 4); + break; + case GetPortStatus: + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "GetPortStatus\n"); + if (!_wIndex || _wIndex > 1) + goto error; + port_status = 0; + if (dwc_otg_hcd->flags.b.port_connect_status_change) + port_status |= (1 << USB_PORT_FEAT_C_CONNECTION); + if (dwc_otg_hcd->flags.b.port_enable_change) + port_status |= (1 << USB_PORT_FEAT_C_ENABLE); + if (dwc_otg_hcd->flags.b.port_suspend_change) + port_status |= (1 << USB_PORT_FEAT_C_SUSPEND); + if (dwc_otg_hcd->flags.b.port_reset_change) + port_status |= (1 << USB_PORT_FEAT_C_RESET); + if (dwc_otg_hcd->flags.b.port_over_current_change) { + DWC_ERROR("Device Not Supported\n"); + port_status |= (1 << USB_PORT_FEAT_C_OVER_CURRENT); + } + if (!dwc_otg_hcd->flags.b.port_connect_status) { + /* + * The port is disconnected, which means the core is + * either in device mode or it soon will be. Just + * return 0's for the remainder of the port status + * since the port register can't be read if the core + * is in device mode. + */ + *((__le32 *) _buf) = cpu_to_le32(port_status); + break; + } + hprt0.d32 = dwc_read_reg32(core_if->host_if->hprt0); + DWC_DEBUGPL(DBG_HCDV, " HPRT0: 0x%08x\n", hprt0.d32); + if (hprt0.b.prtconnsts) + port_status |= (1 << USB_PORT_FEAT_CONNECTION); + if (hprt0.b.prtena) + port_status |= (1 << USB_PORT_FEAT_ENABLE); + if (hprt0.b.prtsusp) + port_status |= (1 << USB_PORT_FEAT_SUSPEND); + if (hprt0.b.prtovrcurract) + port_status |= (1 << USB_PORT_FEAT_OVER_CURRENT); + if (hprt0.b.prtrst) + port_status |= (1 << USB_PORT_FEAT_RESET); + if (hprt0.b.prtpwr) + port_status |= (1 << USB_PORT_FEAT_POWER); + if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED) + port_status |= (1 << USB_PORT_FEAT_HIGHSPEED); + + else if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED) + port_status |= (1 << USB_PORT_FEAT_LOWSPEED); + if (hprt0.b.prttstctl) + port_status |= (1 << USB_PORT_FEAT_TEST); + + /* USB_PORT_FEAT_INDICATOR unsupported always 0 */ + *((__le32 *) _buf) = cpu_to_le32(port_status); + break; + case SetHubFeature: + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "SetHubFeature\n"); + + /* No HUB features supported */ + break; + case SetPortFeature: + if (_wValue != USB_PORT_FEAT_TEST && (!_wIndex || _wIndex > 1)) + goto error; + if (!dwc_otg_hcd->flags.b.port_connect_status) { + /* + * The port is disconnected, which means the core is + * either in device mode or it soon will be. Just + * return without doing anything since the port + * register can't be written if the core is in device + * mode. + */ + break; + } + switch (_wValue) { + case USB_PORT_FEAT_SUSPEND: + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "SetPortFeature - USB_PORT_FEAT_SUSPEND\n"); + if (_hcd->self.otg_port == _wIndex + && _hcd->self.b_hnp_enable) { + gotgctl_data_t gotgctl = {.d32 = 0}; + gotgctl.b.hstsethnpen = 1; + dwc_modify_reg32(&core_if->core_global_regs-> + gotgctl, 0, gotgctl.d32); + core_if->op_state = A_SUSPEND; + } + hprt0.d32 = dwc_otg_read_hprt0(core_if); + hprt0.b.prtsusp = 1; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + + //DWC_PRINT( "SUSPEND: HPRT0=%0x\n", hprt0.d32); + /* Suspend the Phy Clock */ + { + pcgcctl_data_t pcgcctl = {.d32 = 0}; + pcgcctl.b.stoppclk = 1; + dwc_write_reg32(core_if->pcgcctl, pcgcctl.d32); + } + + /* For HNP the bus must be suspended for at least 200ms. */ + if (_hcd->self.b_hnp_enable) { + mdelay(200); + + //DWC_PRINT( "SUSPEND: wait complete! (%d)\n", _hcd->state); + } + break; + case USB_PORT_FEAT_POWER: + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "SetPortFeature - USB_PORT_FEAT_POWER\n"); + hprt0.d32 = dwc_otg_read_hprt0(core_if); + hprt0.b.prtpwr = 1; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + break; + case USB_PORT_FEAT_RESET: + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "SetPortFeature - USB_PORT_FEAT_RESET\n"); + hprt0.d32 = dwc_otg_read_hprt0(core_if); + + /* When B-Host the Port reset bit is set in + * the Start HCD Callback function, so that + * the reset is started within 1ms of the HNP + * success interrupt. */ + if (!_hcd->self.is_b_host) { + hprt0.b.prtrst = 1; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + } + + /* Clear reset bit in 10ms (FS/LS) or 50ms (HS) */ + MDELAY(60); + hprt0.b.prtrst = 0; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + break; + +#ifdef DWC_HS_ELECT_TST + case USB_PORT_FEAT_TEST: + { + uint32_t t; + gintmsk_data_t gintmsk; + t = (_wIndex >> 8); /* MSB wIndex USB */ + DWC_DEBUGPL(DBG_HCD, + "DWC OTG HCD HUB CONTROL - " + "SetPortFeature - USB_PORT_FEAT_TEST %d\n", + t); + warn("USB_PORT_FEAT_TEST %d\n", t); + if (t < 6) { + hprt0.d32 = dwc_otg_read_hprt0(core_if); + hprt0.b.prttstctl = t; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + } else { + /* Setup global vars with reg addresses (quick and + * dirty hack, should be cleaned up) + */ + global_regs = core_if->core_global_regs; + hc_global_regs = core_if->host_if->host_global_regs; + hc_regs = (dwc_otg_hc_regs_t *) ((char *) global_regs + 0x500); + data_fifo = (uint32_t *) ((char *)global_regs + 0x1000); + if (t == 6) { /* HS_HOST_PORT_SUSPEND_RESUME */ + /* Save current interrupt mask */ + gintmsk.d32 =dwc_read_reg32(&global_regs->gintmsk); + + /* Disable all interrupts while we muck with + * the hardware directly + */ + dwc_write_reg32(&global_regs->gintmsk, 0); + + /* 15 second delay per the test spec */ + mdelay(15000); + + /* Drive suspend on the root port */ + hprt0.d32 = dwc_otg_read_hprt0(core_if); + hprt0.b.prtsusp = 1; + hprt0.b.prtres = 0; + dwc_write_reg32(core_if->host_if->hprt0,hprt0.d32); + + /* 15 second delay per the test spec */ + mdelay(15000); + + /* Drive resume on the root port */ + hprt0.d32 = dwc_otg_read_hprt0(core_if); + hprt0.b.prtsusp = 0; + hprt0.b.prtres = 1; + dwc_write_reg32(core_if->host_if->hprt0,hprt0.d32); + mdelay(100); + + /* Clear the resume bit */ + hprt0.b.prtres = 0; + dwc_write_reg32(core_if->host_if->hprt0,hprt0.d32); + + /* Restore interrupts */ + dwc_write_reg32(&global_regs->gintmsk,gintmsk.d32); + } else if (t == 7) { /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR setup */ + /* Save current interrupt mask */ + gintmsk.d32 = dwc_read_reg32(&global_regs->gintmsk); + + /* Disable all interrupts while we muck with + * the hardware directly + */ + dwc_write_reg32(&global_regs->gintmsk, 0); + + /* 15 second delay per the test spec */ + mdelay(15000); + + /* Send the Setup packet */ + do_setup(); + + /* 15 second delay so nothing else happens for awhile */ + mdelay(15000); + + /* Restore interrupts */ + dwc_write_reg32(&global_regs->gintmsk,gintmsk.d32); + } else if (t == 8) { /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR execute */ + /* Save current interrupt mask */ + gintmsk.d32 = dwc_read_reg32(&global_regs->gintmsk); + + /* Disable all interrupts while we muck with + * the hardware directly + */ + dwc_write_reg32(&global_regs->gintmsk, 0); + + /* Send the Setup packet */ + do_setup(); + + /* 15 second delay so nothing else happens for awhile */ + mdelay(15000); + + /* Send the In and Ack packets */ + do_in_ack(); + + /* 15 second delay so nothing else happens for awhile */ + mdelay(15000); + + /* Restore interrupts */ + dwc_write_reg32(&global_regs->gintmsk,gintmsk.d32); + } + } + break; + } + +#endif /* DWC_HS_ELECT_TST */ + case USB_PORT_FEAT_INDICATOR: + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "SetPortFeature - USB_PORT_FEAT_INDICATOR\n"); + /* Not supported */ + break; + default: + retval = -EINVAL; + DWC_ERROR("DWC OTG HCD - " + "SetPortFeature request %xh " + "unknown or unsupported\n", _wValue); + break; + } + break; + default: + error:retval = -EINVAL; + DWC_WARN("DWC OTG HCD - " + "Unknown hub control request type or invalid typeReq: %xh wIndex: %xh wValue: %xh\n", + _typeReq, _wIndex, _wValue); + break; + } + return retval; +} + + +/** + * Assigns transactions from a QTD to a free host channel and initializes the + * host channel to perform the transactions. The host channel is removed from + * the free list. + * + * @param _hcd The HCD state structure. + * @param _qh Transactions from the first QTD for this QH are selected and + * assigned to a free host channel. + */ +static void assign_and_init_hc(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh) +{ + dwc_hc_t * hc; + dwc_otg_qtd_t * qtd; + struct urb *urb; + DWC_DEBUGPL(DBG_HCDV, "%s(%p,%p)\n", __func__, _hcd, _qh); + hc = list_entry(_hcd->free_hc_list.next, dwc_hc_t, hc_list_entry); + + /* Remove the host channel from the free list. */ + list_del_init(&hc->hc_list_entry); + qtd = list_entry(_qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry); + urb = qtd->urb; + _qh->channel = hc; + _qh->qtd_in_process = qtd; + + /* + * Use usb_pipedevice to determine device address. This address is + * 0 before the SET_ADDRESS command and the correct address afterward. + */ + hc->dev_addr = usb_pipedevice(urb->pipe); + hc->ep_num = usb_pipeendpoint(urb->pipe); + if (urb->dev->speed == USB_SPEED_LOW) { + hc->speed = DWC_OTG_EP_SPEED_LOW; + } else if (urb->dev->speed == USB_SPEED_FULL) { + hc->speed = DWC_OTG_EP_SPEED_FULL; + } else { + hc->speed = DWC_OTG_EP_SPEED_HIGH; + } + hc->max_packet = dwc_max_packet(_qh->maxp); + hc->xfer_started = 0; + hc->halt_status = DWC_OTG_HC_XFER_NO_HALT_STATUS; + hc->error_state = (qtd->error_count > 0); + hc->halt_on_queue = 0; + hc->halt_pending = 0; + hc->requests = 0; + + /* + * The following values may be modified in the transfer type section + * below. The xfer_len value may be reduced when the transfer is + * started to accommodate the max widths of the XferSize and PktCnt + * fields in the HCTSIZn register. + */ + hc->do_ping = _qh->ping_state; + hc->ep_is_in = (usb_pipein(urb->pipe) != 0); + hc->data_pid_start = _qh->data_toggle; + hc->multi_count = 1; + if (_hcd->core_if->dma_enable) { + hc->xfer_buff = + (uint8_t *)(u32)urb->transfer_dma + urb->actual_length; + } else { + hc->xfer_buff = + (uint8_t *) urb->transfer_buffer + urb->actual_length; + } + hc->xfer_len = urb->transfer_buffer_length - urb->actual_length; + hc->xfer_count = 0; + + /* + * Set the split attributes + */ + hc->do_split = 0; + if (_qh->do_split) { + hc->do_split = 1; + hc->xact_pos = qtd->isoc_split_pos; + hc->complete_split = qtd->complete_split; + hc->hub_addr = urb->dev->tt->hub->devnum; + hc->port_addr = urb->dev->ttport; + } + switch (usb_pipetype(urb->pipe)) { + case PIPE_CONTROL: + hc->ep_type = DWC_OTG_EP_TYPE_CONTROL; + switch (qtd->control_phase) { + case DWC_OTG_CONTROL_SETUP: + DWC_DEBUGPL(DBG_HCDV, " Control setup transaction\n"); + hc->do_ping = 0; + hc->ep_is_in = 0; + hc->data_pid_start = DWC_OTG_HC_PID_SETUP; + if (_hcd->core_if->dma_enable) { + hc->xfer_buff = (uint8_t *)(u32)urb->setup_dma; + } else { + hc->xfer_buff = (uint8_t *) urb->setup_packet; + } + hc->xfer_len = 8; + break; + case DWC_OTG_CONTROL_DATA: + DWC_DEBUGPL(DBG_HCDV, " Control data transaction\n"); + hc->data_pid_start = qtd->data_toggle; + break; + case DWC_OTG_CONTROL_STATUS: + + /* + * Direction is opposite of data direction or IN if no + * data. + */ + DWC_DEBUGPL(DBG_HCDV, + " Control status transaction\n"); + if (urb->transfer_buffer_length == 0) { + hc->ep_is_in = 1; + } else { + hc->ep_is_in = (usb_pipein(urb->pipe) != USB_DIR_IN); + } + if (hc->ep_is_in) { + hc->do_ping = 0; + } + hc->data_pid_start = DWC_OTG_HC_PID_DATA1; + hc->xfer_len = 0; + if (_hcd->core_if->dma_enable) { + hc->xfer_buff = (uint8_t *)(u32)_hcd->status_buf_dma; + } else { + hc->xfer_buff = (uint8_t *) _hcd->status_buf; + } + break; + } + break; + case PIPE_BULK: + hc->ep_type = DWC_OTG_EP_TYPE_BULK; + break; + case PIPE_INTERRUPT: + hc->ep_type = DWC_OTG_EP_TYPE_INTR; + break; + case PIPE_ISOCHRONOUS: + { + struct usb_iso_packet_descriptor *frame_desc; + frame_desc = &urb->iso_frame_desc[qtd->isoc_frame_index]; + hc->ep_type = DWC_OTG_EP_TYPE_ISOC; + if (_hcd->core_if->dma_enable) { + hc->xfer_buff = (uint8_t *)(u32)urb->transfer_dma; + } else { + hc->xfer_buff = (uint8_t *) urb->transfer_buffer; + } + hc->xfer_buff += frame_desc->offset + qtd->isoc_split_offset; + hc->xfer_len = frame_desc->length - qtd->isoc_split_offset; + if (hc->xact_pos == DWC_HCSPLIT_XACTPOS_ALL) { + if (hc->xfer_len <= 188) { + hc->xact_pos = DWC_HCSPLIT_XACTPOS_ALL; + } else { + hc->xact_pos = DWC_HCSPLIT_XACTPOS_BEGIN; + } + } + } + break; + } + + if (hc->ep_type == DWC_OTG_EP_TYPE_INTR + || hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { + /* + * This value may be modified when the transfer is started to + * reflect the actual transfer length. + */ + hc->multi_count = dwc_hb_mult(_qh->maxp); + } + dwc_otg_hc_init(_hcd->core_if, hc); + hc->qh = _qh; +} + + +/** + * This function selects transactions from the HCD transfer schedule and + * assigns them to available host channels. It is called from HCD interrupt + * handler functions. + * + * @param _hcd The HCD state structure. + * + * @return The types of new transactions that were assigned to host channels. + */ +dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t *_hcd) +{ + struct list_head *qh_ptr; + dwc_otg_qh_t * qh; + int num_channels; + dwc_otg_transaction_type_e ret_val = DWC_OTG_TRANSACTION_NONE; + +#ifdef DEBUG_SOF + DWC_DEBUGPL(DBG_HCD, " Select Transactions\n"); +#endif /* */ + + /* Process entries in the periodic ready list. */ + qh_ptr = _hcd->periodic_sched_ready.next; + while (qh_ptr != &_hcd->periodic_sched_ready + && !list_empty(&_hcd->free_hc_list)) { + qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry); + assign_and_init_hc(_hcd, qh); + /* + * Move the QH from the periodic ready schedule to the + * periodic assigned schedule. + */ + qh_ptr = qh_ptr->next; + list_move(&qh->qh_list_entry, &_hcd->periodic_sched_assigned); + ret_val = DWC_OTG_TRANSACTION_PERIODIC; + } + /* + * Process entries in the deferred portion of the non-periodic list. + * A NAK put them here and, at the right time, they need to be + * placed on the sched_inactive list. + */ + qh_ptr = _hcd->non_periodic_sched_deferred.next; + while (qh_ptr != &_hcd->non_periodic_sched_deferred) { + uint16_t frame_number = + dwc_otg_hcd_get_frame_number(dwc_otg_hcd_to_hcd(_hcd)); + unsigned long flags; + qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry); + qh_ptr = qh_ptr->next; + + if (dwc_frame_num_le(qh->sched_frame, frame_number)) { + // NAK did this + /* + * Move the QH from the non periodic deferred schedule to + * the non periodic inactive schedule. + */ + local_irq_save(flags); + list_move(&qh->qh_list_entry, + &_hcd->non_periodic_sched_inactive); + local_irq_restore(flags); + } + } + + /* + * Process entries in the inactive portion of the non-periodic + * schedule. Some free host channels may not be used if they are + * reserved for periodic transfers. + */ + qh_ptr = _hcd->non_periodic_sched_inactive.next; + num_channels = _hcd->core_if->core_params->host_channels; + while (qh_ptr != &_hcd->non_periodic_sched_inactive && + (_hcd->non_periodic_channels < + num_channels - _hcd->periodic_channels) + && !list_empty(&_hcd->free_hc_list)) { + qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry); + assign_and_init_hc(_hcd, qh); + + /* + * Move the QH from the non-periodic inactive schedule to the + * non-periodic active schedule. + */ + qh_ptr = qh_ptr->next; + list_move(&qh->qh_list_entry, + &_hcd->non_periodic_sched_active); + if (ret_val == DWC_OTG_TRANSACTION_NONE) { + ret_val = DWC_OTG_TRANSACTION_NON_PERIODIC; + } else { + ret_val = DWC_OTG_TRANSACTION_ALL; + } + _hcd->non_periodic_channels++; + } + return ret_val; +} + +/** + * Attempts to queue a single transaction request for a host channel + * associated with either a periodic or non-periodic transfer. This function + * assumes that there is space available in the appropriate request queue. For + * an OUT transfer or SETUP transaction in Slave mode, it checks whether space + * is available in the appropriate Tx FIFO. + * + * @param _hcd The HCD state structure. + * @param _hc Host channel descriptor associated with either a periodic or + * non-periodic transfer. + * @param _fifo_dwords_avail Number of DWORDs available in the periodic Tx + * FIFO for periodic transfers or the non-periodic Tx FIFO for non-periodic + * transfers. + * + * @return 1 if a request is queued and more requests may be needed to + * complete the transfer, 0 if no more requests are required for this + * transfer, -1 if there is insufficient space in the Tx FIFO. + */ +static int queue_transaction(dwc_otg_hcd_t * _hcd, + dwc_hc_t * _hc, uint16_t _fifo_dwords_avail) +{ + int retval; + if (_hcd->core_if->dma_enable) { + if (!_hc->xfer_started) { + dwc_otg_hc_start_transfer(_hcd->core_if, _hc); + _hc->qh->ping_state = 0; + } + retval = 0; + } else if (_hc->halt_pending) { + /* Don't queue a request if the channel has been halted. */ + retval = 0; + } else if (_hc->halt_on_queue) { + dwc_otg_hc_halt(_hcd->core_if, _hc, _hc->halt_status); + retval = 0; + } else if (_hc->do_ping) { + if (!_hc->xfer_started) { + dwc_otg_hc_start_transfer(_hcd->core_if, _hc); + } + retval = 0; + } else if (!_hc->ep_is_in || _hc->data_pid_start == DWC_OTG_HC_PID_SETUP) { + if ((_fifo_dwords_avail * 4) >= _hc->max_packet) { + if (!_hc->xfer_started) { + dwc_otg_hc_start_transfer(_hcd->core_if, _hc); + retval = 1; + } else { + retval = dwc_otg_hc_continue_transfer(_hcd->core_if, _hc); + } + } else { + retval = -1; + } + } else { + if (!_hc->xfer_started) { + dwc_otg_hc_start_transfer(_hcd->core_if, _hc); + retval = 1; + } else { + retval = dwc_otg_hc_continue_transfer(_hcd->core_if, _hc); + } + } + return retval; +} + + +/** + * Processes active non-periodic channels and queues transactions for these + * channels to the DWC_otg controller. After queueing transactions, the NP Tx + * FIFO Empty interrupt is enabled if there are more transactions to queue as + * NP Tx FIFO or request queue space becomes available. Otherwise, the NP Tx + * FIFO Empty interrupt is disabled. + */ +static void process_non_periodic_channels(dwc_otg_hcd_t * _hcd) +{ + gnptxsts_data_t tx_status; + struct list_head *orig_qh_ptr; + dwc_otg_qh_t * qh; + int status; + int no_queue_space = 0; + int no_fifo_space = 0; + int more_to_do = 0; + dwc_otg_core_global_regs_t * global_regs = + _hcd->core_if->core_global_regs; + DWC_DEBUGPL(DBG_HCDV, "Queue non-periodic transactions\n"); + +#ifdef DEBUG + tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts); + DWC_DEBUGPL(DBG_HCDV, " NP Tx Req Queue Space Avail (before queue): %d\n", + tx_status.b.nptxqspcavail); + DWC_DEBUGPL(DBG_HCDV, " NP Tx FIFO Space Avail (before queue): %d\n", + tx_status.b.nptxfspcavail); +#endif /* */ + /* + * Keep track of the starting point. Skip over the start-of-list + * entry. + */ + if (_hcd->non_periodic_qh_ptr == &_hcd->non_periodic_sched_active) { + _hcd->non_periodic_qh_ptr = _hcd->non_periodic_qh_ptr->next; + } + orig_qh_ptr = _hcd->non_periodic_qh_ptr; + + /* + * Process once through the active list or until no more space is + * available in the request queue or the Tx FIFO. + */ + do { + + tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts); + if (!_hcd->core_if->dma_enable + && tx_status.b.nptxqspcavail == 0) { + no_queue_space = 1; + break; + } + qh = + list_entry(_hcd->non_periodic_qh_ptr, dwc_otg_qh_t, + qh_list_entry); + status = + queue_transaction(_hcd, qh->channel, + tx_status.b.nptxfspcavail); + + if (status > 0) { + more_to_do = 1; + } else if (status < 0) { + no_fifo_space = 1; + break; + } +#ifdef OTG_PLB_DMA_TASKLET + if (atomic_read(&release_later)) { + break; + } +#endif + + /* Advance to next QH, skipping start-of-list entry. */ + _hcd->non_periodic_qh_ptr = _hcd->non_periodic_qh_ptr->next; + if (_hcd->non_periodic_qh_ptr == &_hcd->non_periodic_sched_active) { + _hcd->non_periodic_qh_ptr = _hcd->non_periodic_qh_ptr->next; + } + } while (_hcd->non_periodic_qh_ptr != orig_qh_ptr); + if (!_hcd->core_if->dma_enable) { + gintmsk_data_t intr_mask = {.d32 = 0}; + intr_mask.b.nptxfempty = 1; + +#ifndef OTG_PLB_DMA_TASKLET +#ifdef DEBUG + tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts); + DWC_DEBUGPL(DBG_HCDV, " NP Tx Req Queue Space Avail (after queue): %d\n", + tx_status.b.nptxqspcavail); + DWC_DEBUGPL(DBG_HCDV, " NP Tx FIFO Space Avail (after queue): %d\n", + tx_status.b.nptxfspcavail); +#endif /* */ +#endif + + if (more_to_do || no_queue_space || no_fifo_space) { + + /* + * May need to queue more transactions as the request + * queue or Tx FIFO empties. Enable the non-periodic + * Tx FIFO empty interrupt. (Always use the half-empty + * level to ensure that new requests are loaded as + * soon as possible.) + */ + dwc_modify_reg32(&global_regs->gintmsk, 0,intr_mask.d32); + } else { + /* + * Disable the Tx FIFO empty interrupt since there are + * no more transactions that need to be queued right + * now. This function is called from interrupt + * handlers to queue more transactions as transfer + * states change. + */ + dwc_modify_reg32(&global_regs->gintmsk,intr_mask.d32, 0); + } + } +} + +/** + * Processes periodic channels for the next frame and queues transactions for + * these channels to the DWC_otg controller. After queueing transactions, the + * Periodic Tx FIFO Empty interrupt is enabled if there are more transactions + * to queue as Periodic Tx FIFO or request queue space becomes available. + * Otherwise, the Periodic Tx FIFO Empty interrupt is disabled. + */ +static void process_periodic_channels(dwc_otg_hcd_t * _hcd) +{ + hptxsts_data_t tx_status; + struct list_head *qh_ptr; + dwc_otg_qh_t * qh; + int status; + int no_queue_space = 0; + int no_fifo_space = 0; + dwc_otg_host_global_regs_t * host_regs; + host_regs = _hcd->core_if->host_if->host_global_regs; + DWC_DEBUGPL(DBG_HCDV, "Queue periodic transactions\n"); + +#ifdef DEBUG + tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts); + DWC_DEBUGPL(DBG_HCDV, " P Tx Req Queue Space Avail (before queue): %d\n", + tx_status.b.ptxqspcavail); + DWC_DEBUGPL(DBG_HCDV, " P Tx FIFO Space Avail (before queue): %d\n", + tx_status.b.ptxfspcavail); + +#endif /* */ + qh_ptr = _hcd->periodic_sched_assigned.next; + while (qh_ptr != &_hcd->periodic_sched_assigned) { + tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts); + if (tx_status.b.ptxqspcavail == 0) { + no_queue_space = 1; + break; + } + qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry); + + /* + * Set a flag if we're queuing high-bandwidth in slave mode. + * The flag prevents any halts to get into the request queue in + * the middle of multiple high-bandwidth packets getting queued. + */ + if ((!_hcd->core_if->dma_enable) && + (qh->channel->multi_count > 1)) { + _hcd->core_if->queuing_high_bandwidth = 1; + } + status = queue_transaction(_hcd, qh->channel,tx_status.b.ptxfspcavail); + if (status < 0) { + no_fifo_space = 1; + break; + } + + /* + * In Slave mode, stay on the current transfer until there is + * nothing more to do or the high-bandwidth request count is + * reached. In DMA mode, only need to queue one request. The + * controller automatically handles multiple packets for + * high-bandwidth transfers. + */ + if (_hcd->core_if->dma_enable || + (status == 0 || qh->channel->requests == qh->channel->multi_count)) { + qh_ptr = qh_ptr->next; + + /* + * Move the QH from the periodic assigned schedule to + * the periodic queued schedule. + */ + list_move(&qh->qh_list_entry, + &_hcd->periodic_sched_queued); + + /* done queuing high bandwidth */ + _hcd->core_if->queuing_high_bandwidth = 0; + } + } + if (!_hcd->core_if->dma_enable) { + dwc_otg_core_global_regs_t * global_regs; + gintmsk_data_t intr_mask = {.d32 = 0}; + global_regs = _hcd->core_if->core_global_regs; + intr_mask.b.ptxfempty = 1; + +#ifdef DEBUG + tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts); + DWC_DEBUGPL(DBG_HCDV," P Tx Req Queue Space Avail (after queue): %d\n", + tx_status.b.ptxqspcavail); + DWC_DEBUGPL(DBG_HCDV," P Tx FIFO Space Avail (after queue): %d\n", + tx_status.b.ptxfspcavail); + +#endif /* */ + if (!(list_empty(&_hcd->periodic_sched_assigned)) + || no_queue_space || no_fifo_space) { + + /* + * May need to queue more transactions as the request + * queue or Tx FIFO empties. Enable the periodic Tx + * FIFO empty interrupt. (Always use the half-empty + * level to ensure that new requests are loaded as + * soon as possible.) + */ + dwc_modify_reg32(&global_regs->gintmsk, 0,intr_mask.d32); + } else { + /* + * Disable the Tx FIFO empty interrupt since there are + * no more transactions that need to be queued right + * now. This function is called from interrupt + * handlers to queue more transactions as transfer + * states change. + */ + dwc_modify_reg32(&global_regs->gintmsk,intr_mask.d32, 0); + } + } +} + + + +/** + * This function processes the currently active host channels and queues + * transactions for these channels to the DWC_otg controller. It is called + * from HCD interrupt handler functions. + * + * @param _hcd The HCD state structure. + * @param _tr_type The type(s) of transactions to queue (non-periodic, + * periodic, or both). + */ +void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t * _hcd, + dwc_otg_transaction_type_e _tr_type) +{ + +#ifdef DEBUG_SOF + DWC_DEBUGPL(DBG_HCD, "Queue Transactions\n"); + +#endif /* */ + /* Process host channels associated with periodic transfers. */ + if ((_tr_type == DWC_OTG_TRANSACTION_PERIODIC + || _tr_type == DWC_OTG_TRANSACTION_ALL) + && !list_empty(&_hcd->periodic_sched_assigned)) { + process_periodic_channels(_hcd); + } + + /* Process host channels associated with non-periodic transfers. */ + if ((_tr_type == DWC_OTG_TRANSACTION_NON_PERIODIC + || _tr_type == DWC_OTG_TRANSACTION_ALL)) { + if (!list_empty(&_hcd->non_periodic_sched_active)) { + process_non_periodic_channels(_hcd); + } else { + /* + * Ensure NP Tx FIFO empty interrupt is disabled when + * there are no non-periodic transfers to process. + */ + gintmsk_data_t gintmsk = {.d32 = 0}; + gintmsk.b.nptxfempty = 1; + dwc_modify_reg32(&_hcd->core_if->core_global_regs->gintmsk, gintmsk.d32, 0); + } + } +} + +/** + * Sets the final status of an URB and returns it to the device driver. Any + * required cleanup of the URB is performed. + */ +void dwc_otg_hcd_complete_urb(dwc_otg_hcd_t * _hcd, struct urb *_urb, + int _status) +__releases(_hcd->lock) +__acquires(_hcd->lock) +{ + +#ifdef DEBUG + if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { + DWC_PRINT("%s: urb %p, device %d, ep %d %s, status=%d\n", + __func__, _urb, usb_pipedevice(_urb->pipe), + usb_pipeendpoint(_urb->pipe), + usb_pipein(_urb->pipe) ? "IN" : "OUT", _status); + if (usb_pipetype(_urb->pipe) == PIPE_ISOCHRONOUS) { + int i; + for (i = 0; i < _urb->number_of_packets; i++) { + DWC_PRINT(" ISO Desc %d status: %d\n", i, + _urb->iso_frame_desc[i].status); + } + } + } + +#endif /* */ + _urb->hcpriv = NULL; + usb_hcd_unlink_urb_from_ep(dwc_otg_hcd_to_hcd(_hcd), _urb); + spin_unlock(&_hcd->lock); + usb_hcd_giveback_urb(dwc_otg_hcd_to_hcd(_hcd), _urb, _status); + spin_lock(&_hcd->lock); +} + + +/* + * Returns the Queue Head for an URB. + */ +dwc_otg_qh_t * dwc_urb_to_qh(struct urb *_urb) +{ + struct usb_host_endpoint *ep = dwc_urb_to_endpoint(_urb); + return (dwc_otg_qh_t *) ep->hcpriv; +} + + +#ifdef DEBUG +void dwc_print_setup_data(uint8_t * setup) +{ + int i; + if (CHK_DEBUG_LEVEL(DBG_HCD)) { + DWC_PRINT("Setup Data = MSB "); + for (i = 7; i >= 0; i--) + DWC_PRINT("%02x ", setup[i]); + DWC_PRINT("\n"); + DWC_PRINT(" bmRequestType Tranfer = %s\n", + (setup[0] & 0x80) ? "Device-to-Host" : + "Host-to-Device"); + DWC_PRINT(" bmRequestType Type = "); + switch ((setup[0] & 0x60) >> 5) { + case 0: + DWC_PRINT("Standard\n"); + break; + case 1: + DWC_PRINT("Class\n"); + break; + case 2: + DWC_PRINT("Vendor\n"); + break; + case 3: + DWC_PRINT("Reserved\n"); + break; + } + DWC_PRINT(" bmRequestType Recipient = "); + switch (setup[0] & 0x1f) { + case 0: + DWC_PRINT("Device\n"); + break; + case 1: + DWC_PRINT("Interface\n"); + break; + case 2: + DWC_PRINT("Endpoint\n"); + break; + case 3: + DWC_PRINT("Other\n"); + break; + default: + DWC_PRINT("Reserved\n"); + break; + } + DWC_PRINT(" bRequest = 0x%0x\n", setup[1]); + DWC_PRINT(" wValue = 0x%0x\n", *((uint16_t *) & setup[2])); + DWC_PRINT(" wIndex = 0x%0x\n", *((uint16_t *) & setup[4])); + DWC_PRINT(" wLength = 0x%0x\n\n", *((uint16_t *) & setup[6])); + } +} + + +#endif /* */ +void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t * _hcd) +{ + +/* +#ifdef DEBUG + DWC_PRINT("Frame remaining at SOF:\n"); + DWC_PRINT(" samples %u, accum %llu, avg %llu\n", + _hcd->frrem_samples, _hcd->frrem_accum, + (_hcd->frrem_samples > 0) ? + _hcd->frrem_accum/_hcd->frrem_samples : 0); + + DWC_PRINT("\n"); + DWC_PRINT("Frame remaining at start_transfer (uframe 7):\n"); + DWC_PRINT(" samples %u, accum %llu, avg %llu\n", + _hcd->core_if->hfnum_7_samples, _hcd->core_if->hfnum_7_frrem_accum, + (_hcd->core_if->hfnum_7_samples > 0) ? + _hcd->core_if->hfnum_7_frrem_accum/_hcd->core_if->hfnum_7_samples : 0); + DWC_PRINT("Frame remaining at start_transfer (uframe 0):\n"); + DWC_PRINT(" samples %u, accum %llu, avg %llu\n", + _hcd->core_if->hfnum_0_samples, _hcd->core_if->hfnum_0_frrem_accum, + (_hcd->core_if->hfnum_0_samples > 0) ? + _hcd->core_if->hfnum_0_frrem_accum/_hcd->core_if->hfnum_0_samples : 0); + DWC_PRINT("Frame remaining at start_transfer (uframe 1-6):\n"); + DWC_PRINT(" samples %u, accum %llu, avg %llu\n", + _hcd->core_if->hfnum_other_samples, _hcd->core_if->hfnum_other_frrem_accum, + (_hcd->core_if->hfnum_other_samples > 0) ? + _hcd->core_if->hfnum_other_frrem_accum/_hcd->core_if->hfnum_other_samples : 0); + + DWC_PRINT("\n"); + DWC_PRINT("Frame remaining at sample point A (uframe 7):\n"); + DWC_PRINT(" samples %u, accum %llu, avg %llu\n", + _hcd->hfnum_7_samples_a, _hcd->hfnum_7_frrem_accum_a, + (_hcd->hfnum_7_samples_a > 0) ? + _hcd->hfnum_7_frrem_accum_a/_hcd->hfnum_7_samples_a : 0); + DWC_PRINT("Frame remaining at sample point A (uframe 0):\n"); + DWC_PRINT(" samples %u, accum %llu, avg %llu\n", + _hcd->hfnum_0_samples_a, _hcd->hfnum_0_frrem_accum_a, + (_hcd->hfnum_0_samples_a > 0) ? + _hcd->hfnum_0_frrem_accum_a/_hcd->hfnum_0_samples_a : 0); + DWC_PRINT("Frame remaining at sample point A (uframe 1-6):\n"); + DWC_PRINT(" samples %u, accum %llu, avg %llu\n", + _hcd->hfnum_other_samples_a, _hcd->hfnum_other_frrem_accum_a, + (_hcd->hfnum_other_samples_a > 0) ? + _hcd->hfnum_other_frrem_accum_a/_hcd->hfnum_other_samples_a : 0); + + DWC_PRINT("\n"); + DWC_PRINT("Frame remaining at sample point B (uframe 7):\n"); + DWC_PRINT(" samples %u, accum %llu, avg %llu\n", + _hcd->hfnum_7_samples_b, _hcd->hfnum_7_frrem_accum_b, + (_hcd->hfnum_7_samples_b > 0) ? + _hcd->hfnum_7_frrem_accum_b/_hcd->hfnum_7_samples_b : 0); + DWC_PRINT("Frame remaining at sample point B (uframe 0):\n"); + DWC_PRINT(" samples %u, accum %llu, avg %llu\n", + _hcd->hfnum_0_samples_b, _hcd->hfnum_0_frrem_accum_b, + (_hcd->hfnum_0_samples_b > 0) ? + _hcd->hfnum_0_frrem_accum_b/_hcd->hfnum_0_samples_b : 0); + DWC_PRINT("Frame remaining at sample point B (uframe 1-6):\n"); + DWC_PRINT(" samples %u, accum %llu, avg %llu\n", + _hcd->hfnum_other_samples_b, _hcd->hfnum_other_frrem_accum_b, + (_hcd->hfnum_other_samples_b > 0) ? + _hcd->hfnum_other_frrem_accum_b/_hcd->hfnum_other_samples_b : 0); +#endif +*/ +} void dwc_otg_hcd_dump_state(dwc_otg_hcd_t * _hcd) +{ + +#ifdef DEBUG + int num_channels; + int i; + gnptxsts_data_t np_tx_status; + hptxsts_data_t p_tx_status; + num_channels = _hcd->core_if->core_params->host_channels; + DWC_PRINT("\n"); + DWC_PRINT + ("************************************************************\n"); + DWC_PRINT("HCD State:\n"); + DWC_PRINT(" Num channels: %d\n", num_channels); + for (i = 0; i < num_channels; i++) { + dwc_hc_t * hc = _hcd->hc_ptr_array[i]; + DWC_PRINT(" Channel %d:\n", i); + DWC_PRINT(" dev_addr: %d, ep_num: %d, ep_is_in: %d\n", + hc->dev_addr, hc->ep_num, hc->ep_is_in); + DWC_PRINT(" speed: %d\n", hc->speed); + DWC_PRINT(" ep_type: %d\n", hc->ep_type); + DWC_PRINT(" max_packet: %d\n", hc->max_packet); + DWC_PRINT(" data_pid_start: %d\n", hc->data_pid_start); + DWC_PRINT(" multi_count: %d\n", hc->multi_count); + DWC_PRINT(" xfer_started: %d\n", hc->xfer_started); + DWC_PRINT(" xfer_buff: %p\n", hc->xfer_buff); + DWC_PRINT(" xfer_len: %d\n", hc->xfer_len); + DWC_PRINT(" xfer_count: %d\n", hc->xfer_count); + DWC_PRINT(" halt_on_queue: %d\n", hc->halt_on_queue); + DWC_PRINT(" halt_pending: %d\n", hc->halt_pending); + DWC_PRINT(" halt_status: %d\n", hc->halt_status); + DWC_PRINT(" do_split: %d\n", hc->do_split); + DWC_PRINT(" complete_split: %d\n", hc->complete_split); + DWC_PRINT(" hub_addr: %d\n", hc->hub_addr); + DWC_PRINT(" port_addr: %d\n", hc->port_addr); + DWC_PRINT(" xact_pos: %d\n", hc->xact_pos); + DWC_PRINT(" requests: %d\n", hc->requests); + DWC_PRINT(" qh: %p\n", hc->qh); + if (hc->xfer_started) { + hfnum_data_t hfnum; + hcchar_data_t hcchar; + hctsiz_data_t hctsiz; + hcint_data_t hcint; + hcintmsk_data_t hcintmsk; + hfnum.d32 = + dwc_read_reg32(&_hcd->core_if->host_if-> + host_global_regs->hfnum); + hcchar.d32 = + dwc_read_reg32(&_hcd->core_if->host_if->hc_regs[i]-> + hcchar); + hctsiz.d32 = + dwc_read_reg32(&_hcd->core_if->host_if->hc_regs[i]-> + hctsiz); + hcint.d32 = + dwc_read_reg32(&_hcd->core_if->host_if->hc_regs[i]-> + hcint); + hcintmsk.d32 = + dwc_read_reg32(&_hcd->core_if->host_if->hc_regs[i]-> + hcintmsk); + DWC_PRINT(" hfnum: 0x%08x\n", hfnum.d32); + DWC_PRINT(" hcchar: 0x%08x\n", hcchar.d32); + DWC_PRINT(" hctsiz: 0x%08x\n", hctsiz.d32); + DWC_PRINT(" hcint: 0x%08x\n", hcint.d32); + DWC_PRINT(" hcintmsk: 0x%08x\n", hcintmsk.d32); + } + if (hc->xfer_started && (hc->qh != NULL) + && (hc->qh->qtd_in_process != NULL)) { + dwc_otg_qtd_t * qtd; + struct urb *urb; + qtd = hc->qh->qtd_in_process; + urb = qtd->urb; + DWC_PRINT(" URB Info:\n"); + DWC_PRINT(" qtd: %p, urb: %p\n", qtd, urb); + if (urb != NULL) { + DWC_PRINT(" Dev: %d, EP: %d %s\n", + usb_pipedevice(urb->pipe), + usb_pipeendpoint(urb->pipe), + usb_pipein(urb-> + pipe) ? "IN" : "OUT"); + DWC_PRINT(" Max packet size: %d\n", + usb_maxpacket(urb->dev, urb->pipe, + usb_pipeout(urb-> + pipe))); + DWC_PRINT(" transfer_buffer: %p\n", + urb->transfer_buffer); + DWC_PRINT(" transfer_dma: %p\n", + (void *)urb->transfer_dma); + DWC_PRINT(" transfer_buffer_length: %d\n", + urb->transfer_buffer_length); + DWC_PRINT(" actual_length: %d\n", + urb->actual_length); + } + } + } DWC_PRINT(" non_periodic_channels: %d\n", + _hcd->non_periodic_channels); + DWC_PRINT(" periodic_channels: %d\n", _hcd->periodic_channels); + DWC_PRINT(" periodic_usecs: %d\n", _hcd->periodic_usecs); + np_tx_status.d32 = + dwc_read_reg32(&_hcd->core_if->core_global_regs->gnptxsts); + DWC_PRINT(" NP Tx Req Queue Space Avail: %d\n", + np_tx_status.b.nptxqspcavail); + DWC_PRINT(" NP Tx FIFO Space Avail: %d\n", + np_tx_status.b.nptxfspcavail); + p_tx_status.d32 = + dwc_read_reg32(&_hcd->core_if->host_if->host_global_regs->hptxsts); + DWC_PRINT(" P Tx Req Queue Space Avail: %d\n", + p_tx_status.b.ptxqspcavail); + DWC_PRINT(" P Tx FIFO Space Avail: %d\n", p_tx_status.b.ptxfspcavail); + dwc_otg_hcd_dump_frrem(_hcd); + dwc_otg_dump_global_registers(_hcd->core_if); + dwc_otg_dump_host_registers(_hcd->core_if); + DWC_PRINT + ("************************************************************\n"); + DWC_PRINT("\n"); + +#endif /* */ +} +#endif /* DWC_DEVICE_ONLY */ diff --git a/drivers/usb/gadget/dwc_otg/dwc_otg_hcd.h b/drivers/usb/gadget/dwc_otg/dwc_otg_hcd.h index ae2b8c3e179..9ac7598b3ed 100644 --- a/drivers/usb/gadget/dwc_otg/dwc_otg_hcd.h +++ b/drivers/usb/gadget/dwc_otg/dwc_otg_hcd.h @@ -36,7 +36,11 @@ #include <linux/list.h> #include <linux/usb.h> +#if 0 +#include <linux/usb/hcd.h> +#else #include <../drivers/usb/core/hcd.h> +#endif struct lm_device; struct dwc_otg_device; @@ -205,6 +209,9 @@ typedef struct dwc_otg_qh { /** @} */ + uint16_t speed; + uint16_t frame_usecs[8]; + /** Entry for QH in either the periodic or non-periodic schedule. */ struct list_head qh_list_entry; } dwc_otg_qh_t; @@ -314,6 +321,18 @@ typedef struct dwc_otg_hcd { */ uint16_t periodic_usecs; + /** + * Total bandwidth claimed so far for all periodic transfers + * in a frame. + * This will include a mixture of HS and FS transfers. + * Units are microseconds per (micro)frame. + * We have a budget per frame and have to schedule + * transactions accordingly. + * Watch out for the fact that things are actually scheduled for the + * "next frame". + */ + uint16_t frame_usecs[8]; + /** * Frame number read from the core at SOF. The value ranges from 0 to * DWC_HFNUM_MAX_FRNUM. @@ -327,17 +346,9 @@ typedef struct dwc_otg_hcd { struct list_head free_hc_list; /** - * Number of host channels assigned to periodic transfers. Currently - * assuming that there is a dedicated host channel for each periodic - * transaction and at least one host channel available for - * non-periodic transactions. - */ - int periodic_channels; - - /** - * Number of host channels assigned to non-periodic transfers. + * Number of available host channels. */ - int non_periodic_channels; + int available_host_channels; /** * Array of pointers to the host channel descriptors. Allows accessing diff --git a/drivers/usb/gadget/dwc_otg/dwc_otg_hcd.h.org b/drivers/usb/gadget/dwc_otg/dwc_otg_hcd.h.org new file mode 100644 index 00000000000..ae2b8c3e179 --- /dev/null +++ b/drivers/usb/gadget/dwc_otg/dwc_otg_hcd.h.org @@ -0,0 +1,660 @@ +/* ========================================================================== + * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_hcd.h $ + * $Revision: #6 $ + * $Date: 2006/12/05 $ + * $Change: 762293 $ + * + * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, + * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless + * otherwise expressly agreed to in writing between Synopsys and you. + * + * The Software IS NOT an item of Licensed Software or Licensed Product under + * any End User Software License Agreement or Agreement for Licensed Product + * with Synopsys or any supplement thereto. You are permitted to use and + * redistribute this Software in source and binary forms, with or without + * modification, provided that redistributions of source code must retain this + * notice. You may not view, use, disclose, copy or distribute this file or + * any information contained herein except pursuant to this license grant from + * Synopsys. If you do not agree with this notice, including the disclaimer + * below, then you are not authorized to use the Software. + * + * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * ========================================================================== */ +#ifndef CONFIG_DWC_DEVICE_ONLY +#if !defined(__DWC_HCD_H__) +#define __DWC_HCD_H__ + +#include <linux/list.h> +#include <linux/usb.h> +#include <../drivers/usb/core/hcd.h> + +struct lm_device; +struct dwc_otg_device; + +#include "dwc_otg_cil.h" + +/** + * @file + * + * This file contains the structures, constants, and interfaces for + * the Host Contoller Driver (HCD). + * + * The Host Controller Driver (HCD) is responsible for translating requests + * from the USB Driver into the appropriate actions on the DWC_otg controller. + * It isolates the USBD from the specifics of the controller by providing an + * API to the USBD. + */ + +/** + * Phases for control transfers. + */ +typedef enum dwc_otg_control_phase { + DWC_OTG_CONTROL_SETUP, + DWC_OTG_CONTROL_DATA, + DWC_OTG_CONTROL_STATUS +} dwc_otg_control_phase_e; + +/** Transaction types. */ +typedef enum dwc_otg_transaction_type { + DWC_OTG_TRANSACTION_NONE, + DWC_OTG_TRANSACTION_PERIODIC, + DWC_OTG_TRANSACTION_NON_PERIODIC, + DWC_OTG_TRANSACTION_ALL +} dwc_otg_transaction_type_e; + +/** + * A Queue Transfer Descriptor (QTD) holds the state of a bulk, control, + * interrupt, or isochronous transfer. A single QTD is created for each URB + * (of one of these types) submitted to the HCD. The transfer associated with + * a QTD may require one or multiple transactions. + * + * A QTD is linked to a Queue Head, which is entered in either the + * non-periodic or periodic schedule for execution. When a QTD is chosen for + * execution, some or all of its transactions may be executed. After + * execution, the state of the QTD is updated. The QTD may be retired if all + * its transactions are complete or if an error occurred. Otherwise, it + * remains in the schedule so more transactions can be executed later. + */ + +struct dwc_otg_qh; + +typedef struct dwc_otg_qtd { + /** + * Determines the PID of the next data packet for the data phase of + * control transfers. Ignored for other transfer types.<br> + * One of the following values: + * - DWC_OTG_HC_PID_DATA0 + * - DWC_OTG_HC_PID_DATA1 + */ + uint8_t data_toggle; + + /** Current phase for control transfers (Setup, Data, or Status). */ + dwc_otg_control_phase_e control_phase; + + /** Keep track of the current split type + * for FS/LS endpoints on a HS Hub */ + uint8_t complete_split; + + /** How many bytes transferred during SSPLIT OUT */ + uint32_t ssplit_out_xfer_count; + + /** + * Holds the number of bus errors that have occurred for a transaction + * within this transfer. + */ + uint8_t error_count; + + /** + * Index of the next frame descriptor for an isochronous transfer. A + * frame descriptor describes the buffer position and length of the + * data to be transferred in the next scheduled (micro)frame of an + * isochronous transfer. It also holds status for that transaction. + * The frame index starts at 0. + */ + int isoc_frame_index; + + /** Position of the ISOC split on full/low speed */ + uint8_t isoc_split_pos; + + /** Position of the ISOC split in the buffer for the current frame */ + uint16_t isoc_split_offset; + + /** URB for this transfer */ + struct urb *urb; + + /** This list of QTDs */ + struct list_head qtd_list_entry; + + /* Field to track the qh pointer */ + struct dwc_otg_qh *qtd_qh_ptr; +} dwc_otg_qtd_t; + +/** + * A Queue Head (QH) holds the static characteristics of an endpoint and + * maintains a list of transfers (QTDs) for that endpoint. A QH structure may + * be entered in either the non-periodic or periodic schedule. + */ +typedef struct dwc_otg_qh { + /** + * Endpoint type. + * One of the following values: + * - USB_ENDPOINT_XFER_CONTROL + * - USB_ENDPOINT_XFER_ISOC + * - USB_ENDPOINT_XFER_BULK + * - USB_ENDPOINT_XFER_INT + */ + uint8_t ep_type; + uint8_t ep_is_in; + + /** wMaxPacketSize Field of Endpoint Descriptor. */ + uint16_t maxp; + + /** + * Determines the PID of the next data packet for non-control + * transfers. Ignored for control transfers.<br> + * One of the following values: + * - DWC_OTG_HC_PID_DATA0 + * - DWC_OTG_HC_PID_DATA1 + */ + uint8_t data_toggle; + + /** Ping state if 1. */ + uint8_t ping_state; + + /** + * List of QTDs for this QH. + */ + struct list_head qtd_list; + + /** Host channel currently processing transfers for this QH. */ + dwc_hc_t *channel; + + /** QTD currently assigned to a host channel for this QH. */ + dwc_otg_qtd_t *qtd_in_process; + + /** Full/low speed endpoint on high-speed hub requires split. */ + uint8_t do_split; + + /** @name Periodic schedule information */ + /** @{ */ + + /** Bandwidth in microseconds per (micro)frame. */ + uint8_t usecs; + + /** Interval between transfers in (micro)frames. */ + uint16_t interval; + + /** + * (micro)frame to initialize a periodic transfer. The transfer + * executes in the following (micro)frame. + */ + uint16_t sched_frame; + + /** (micro)frame at which last start split was initialized. */ + uint16_t start_split_frame; + + /** @} */ + + /** Entry for QH in either the periodic or non-periodic schedule. */ + struct list_head qh_list_entry; +} dwc_otg_qh_t; + +/** + * This structure holds the state of the HCD, including the non-periodic and + * periodic schedules. + */ +typedef struct dwc_otg_hcd { + + spinlock_t lock; + + /** DWC OTG Core Interface Layer */ + dwc_otg_core_if_t *core_if; + + /** Internal DWC HCD Flags */ + volatile union dwc_otg_hcd_internal_flags { + uint32_t d32; + struct { + unsigned port_connect_status_change : 1; + unsigned port_connect_status : 1; + unsigned port_reset_change : 1; + unsigned port_enable_change : 1; + unsigned port_suspend_change : 1; + unsigned port_over_current_change : 1; + unsigned reserved : 27; + } b; + } flags; + + /** + * Inactive items in the non-periodic schedule. This is a list of + * Queue Heads. Transfers associated with these Queue Heads are not + * currently assigned to a host channel. + */ + struct list_head non_periodic_sched_inactive; + + /** + * Deferred items in the non-periodic schedule. This is a list of + * Queue Heads. Transfers associated with these Queue Heads are not + * currently assigned to a host channel. + * When we get an NAK, the QH goes here. + */ + struct list_head non_periodic_sched_deferred; + + /** + * Active items in the non-periodic schedule. This is a list of + * Queue Heads. Transfers associated with these Queue Heads are + * currently assigned to a host channel. + */ + struct list_head non_periodic_sched_active; + + /** + * Pointer to the next Queue Head to process in the active + * non-periodic schedule. + */ + struct list_head *non_periodic_qh_ptr; + + /** + * Inactive items in the periodic schedule. This is a list of QHs for + * periodic transfers that are _not_ scheduled for the next frame. + * Each QH in the list has an interval counter that determines when it + * needs to be scheduled for execution. This scheduling mechanism + * allows only a simple calculation for periodic bandwidth used (i.e. + * must assume that all periodic transfers may need to execute in the + * same frame). However, it greatly simplifies scheduling and should + * be sufficient for the vast majority of OTG hosts, which need to + * connect to a small number of peripherals at one time. + * + * Items move from this list to periodic_sched_ready when the QH + * interval counter is 0 at SOF. + */ + struct list_head periodic_sched_inactive; + + /** + * List of periodic QHs that are ready for execution in the next + * frame, but have not yet been assigned to host channels. + * + * Items move from this list to periodic_sched_assigned as host + * channels become available during the current frame. + */ + struct list_head periodic_sched_ready; + + /** + * List of periodic QHs to be executed in the next frame that are + * assigned to host channels. + * + * Items move from this list to periodic_sched_queued as the + * transactions for the QH are queued to the DWC_otg controller. + */ + struct list_head periodic_sched_assigned; + + /** + * List of periodic QHs that have been queued for execution. + * + * Items move from this list to either periodic_sched_inactive or + * periodic_sched_ready when the channel associated with the transfer + * is released. If the interval for the QH is 1, the item moves to + * periodic_sched_ready because it must be rescheduled for the next + * frame. Otherwise, the item moves to periodic_sched_inactive. + */ + struct list_head periodic_sched_queued; + + /** + * Total bandwidth claimed so far for periodic transfers. This value + * is in microseconds per (micro)frame. The assumption is that all + * periodic transfers may occur in the same (micro)frame. + */ + uint16_t periodic_usecs; + + /** + * Frame number read from the core at SOF. The value ranges from 0 to + * DWC_HFNUM_MAX_FRNUM. + */ + uint16_t frame_number; + + /** + * Free host channels in the controller. This is a list of + * dwc_hc_t items. + */ + struct list_head free_hc_list; + + /** + * Number of host channels assigned to periodic transfers. Currently + * assuming that there is a dedicated host channel for each periodic + * transaction and at least one host channel available for + * non-periodic transactions. + */ + int periodic_channels; + + /** + * Number of host channels assigned to non-periodic transfers. + */ + int non_periodic_channels; + + /** + * Array of pointers to the host channel descriptors. Allows accessing + * a host channel descriptor given the host channel number. This is + * useful in interrupt handlers. + */ + dwc_hc_t *hc_ptr_array[MAX_EPS_CHANNELS]; + + /** + * Buffer to use for any data received during the status phase of a + * control transfer. Normally no data is transferred during the status + * phase. This buffer is used as a bit bucket. + */ + uint8_t *status_buf; + + /** + * DMA address for status_buf. + */ + dma_addr_t status_buf_dma; +#define DWC_OTG_HCD_STATUS_BUF_SIZE 64 + + /** + * Structure to allow starting the HCD in a non-interrupt context + * during an OTG role change. + */ + struct work_struct start_work; + struct usb_hcd *_p; + + /** + * Connection timer. An OTG host must display a message if the device + * does not connect. Started when the VBus power is turned on via + * sysfs attribute "buspower". + */ + struct timer_list conn_timer; + + /* Tasket to do a reset */ + struct tasklet_struct *reset_tasklet; + +#ifdef CONFIG_DWC_DEBUG + uint32_t frrem_samples; + uint64_t frrem_accum; + + uint32_t hfnum_7_samples_a; + uint64_t hfnum_7_frrem_accum_a; + uint32_t hfnum_0_samples_a; + uint64_t hfnum_0_frrem_accum_a; + uint32_t hfnum_other_samples_a; + uint64_t hfnum_other_frrem_accum_a; + + uint32_t hfnum_7_samples_b; + uint64_t hfnum_7_frrem_accum_b; + uint32_t hfnum_0_samples_b; + uint64_t hfnum_0_frrem_accum_b; + uint32_t hfnum_other_samples_b; + uint64_t hfnum_other_frrem_accum_b; +#endif + +} dwc_otg_hcd_t; + +/** Gets the dwc_otg_hcd from a struct usb_hcd */ +static inline dwc_otg_hcd_t *hcd_to_dwc_otg_hcd(struct usb_hcd *hcd) +{ + return (dwc_otg_hcd_t *)(hcd->hcd_priv); +} + +/** Gets the struct usb_hcd that contains a dwc_otg_hcd_t. */ +static inline struct usb_hcd *dwc_otg_hcd_to_hcd(dwc_otg_hcd_t *dwc_otg_hcd) +{ + return container_of((void *)dwc_otg_hcd, struct usb_hcd, hcd_priv); +} + +/** @name HCD Create/Destroy Functions */ +/** @{ */ +extern int __init dwc_otg_hcd_init(struct device *_dev, dwc_otg_device_t * dwc_otg_device); +extern void dwc_otg_hcd_remove(struct device *_dev); +/** @} */ + +/** @name Linux HC Driver API Functions */ +/** @{ */ + +extern int dwc_otg_hcd_start(struct usb_hcd *hcd); +extern void dwc_otg_hcd_stop(struct usb_hcd *hcd); +extern int dwc_otg_hcd_get_frame_number(struct usb_hcd *hcd); +extern void dwc_otg_hcd_free(struct usb_hcd *hcd); +extern int dwc_otg_hcd_urb_enqueue(struct usb_hcd *hcd, + struct urb *urb, + gfp_t mem_flags); +extern int dwc_otg_hcd_urb_dequeue(struct usb_hcd *hcd, +/* struct usb_host_endpoint *ep,*/ + struct urb *urb, int status); +extern void dwc_otg_hcd_endpoint_disable(struct usb_hcd *hcd, + struct usb_host_endpoint *ep); +extern irqreturn_t dwc_otg_hcd_irq(struct usb_hcd *hcd); +extern int dwc_otg_hcd_hub_status_data(struct usb_hcd *hcd, + char *buf); +extern int dwc_otg_hcd_hub_control(struct usb_hcd *hcd, + u16 typeReq, + u16 wValue, + u16 wIndex, + char *buf, + u16 wLength); + +/** @} */ + +/** @name Transaction Execution Functions */ +/** @{ */ +extern dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t *_hcd); +extern void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t *_hcd, + dwc_otg_transaction_type_e _tr_type); +extern void dwc_otg_hcd_complete_urb(dwc_otg_hcd_t *_hcd, struct urb *_urb, + int _status); +/** @} */ + +/** @name Interrupt Handler Functions */ +/** @{ */ +extern int32_t dwc_otg_hcd_handle_intr (dwc_otg_hcd_t *_dwc_otg_hcd); +extern int32_t dwc_otg_hcd_handle_sof_intr (dwc_otg_hcd_t *_dwc_otg_hcd); +extern int32_t dwc_otg_hcd_handle_rx_status_q_level_intr (dwc_otg_hcd_t *_dwc_otg_hcd); +extern int32_t dwc_otg_hcd_handle_np_tx_fifo_empty_intr (dwc_otg_hcd_t *_dwc_otg_hcd); +extern int32_t dwc_otg_hcd_handle_perio_tx_fifo_empty_intr (dwc_otg_hcd_t *_dwc_otg_hcd); +extern int32_t dwc_otg_hcd_handle_incomplete_periodic_intr(dwc_otg_hcd_t *_dwc_otg_hcd); +extern int32_t dwc_otg_hcd_handle_port_intr (dwc_otg_hcd_t *_dwc_otg_hcd); +extern int32_t dwc_otg_hcd_handle_conn_id_status_change_intr (dwc_otg_hcd_t *_dwc_otg_hcd); +extern int32_t dwc_otg_hcd_handle_disconnect_intr (dwc_otg_hcd_t *_dwc_otg_hcd); +extern int32_t dwc_otg_hcd_handle_hc_intr (dwc_otg_hcd_t *_dwc_otg_hcd); +extern int32_t dwc_otg_hcd_handle_hc_n_intr (dwc_otg_hcd_t *_dwc_otg_hcd, uint32_t _num); +extern int32_t dwc_otg_hcd_handle_session_req_intr (dwc_otg_hcd_t *_dwc_otg_hcd); +extern int32_t dwc_otg_hcd_handle_wakeup_detected_intr (dwc_otg_hcd_t *_dwc_otg_hcd); +/** @} */ + + +/** @name Schedule Queue Functions */ +/** @{ */ + +/* Implemented in dwc_otg_hcd_queue.c */ +extern dwc_otg_qh_t *dwc_otg_hcd_qh_create (dwc_otg_hcd_t *_hcd, struct urb *_urb); +extern void dwc_otg_hcd_qh_init (dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh, struct urb *_urb); +extern void dwc_otg_hcd_qh_free (dwc_otg_qh_t *_qh); +extern int dwc_otg_hcd_qh_add (dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh); +extern void dwc_otg_hcd_qh_remove (dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh); +extern void dwc_otg_hcd_qh_deactivate (dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh, int sched_csplit); +extern int dwc_otg_hcd_qh_deferr (dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh, int delay); + +/** Remove and free a QH */ +static inline void dwc_otg_hcd_qh_remove_and_free (dwc_otg_hcd_t *_hcd, + dwc_otg_qh_t *_qh) +{ + dwc_otg_hcd_qh_remove (_hcd, _qh); + dwc_otg_hcd_qh_free (_qh); +} + +/** Allocates memory for a QH structure. + * @return Returns the memory allocate or NULL on error. */ +static inline dwc_otg_qh_t *dwc_otg_hcd_qh_alloc (void) +{ + return (dwc_otg_qh_t *) kmalloc (sizeof(dwc_otg_qh_t), GFP_KERNEL); +} + +extern dwc_otg_qtd_t *dwc_otg_hcd_qtd_create (struct urb *urb); +extern void dwc_otg_hcd_qtd_init (dwc_otg_qtd_t *qtd, struct urb *urb); +extern int dwc_otg_hcd_qtd_add (dwc_otg_qtd_t *qtd, dwc_otg_hcd_t *dwc_otg_hcd); + +/** Allocates memory for a QTD structure. + * @return Returns the memory allocate or NULL on error. */ +static inline dwc_otg_qtd_t *dwc_otg_hcd_qtd_alloc (void) +{ + return (dwc_otg_qtd_t *) kmalloc (sizeof(dwc_otg_qtd_t), GFP_KERNEL); +} + +/** Frees the memory for a QTD structure. QTD should already be removed from + * list. + * @param[in] _qtd QTD to free.*/ +static inline void dwc_otg_hcd_qtd_free (dwc_otg_qtd_t *_qtd) +{ + kfree (_qtd); +} + +/** Removes a QTD from list. + * @param[in] _qtd QTD to remove from list. */ +static inline void dwc_otg_hcd_qtd_remove (dwc_otg_qtd_t *_qtd) +{ + unsigned long flags; + local_irq_save (flags); + list_del (&_qtd->qtd_list_entry); + local_irq_restore (flags); +} + +/** Remove and free a QTD */ +static inline void dwc_otg_hcd_qtd_remove_and_free (dwc_otg_qtd_t *_qtd) +{ + dwc_otg_hcd_qtd_remove (_qtd); + dwc_otg_hcd_qtd_free (_qtd); +} + +/** @} */ + + +/** @name Internal Functions */ +/** @{ */ +dwc_otg_qh_t *dwc_urb_to_qh(struct urb *_urb); +void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t *_hcd); +void dwc_otg_hcd_dump_state(dwc_otg_hcd_t *_hcd); +/** @} */ + +/** Gets the usb_host_endpoint associated with an URB. */ +static inline struct usb_host_endpoint *dwc_urb_to_endpoint(struct urb *_urb) +{ + struct usb_device *dev = _urb->dev; + int ep_num = usb_pipeendpoint(_urb->pipe); + + if (usb_pipein(_urb->pipe)) + return dev->ep_in[ep_num]; + else + return dev->ep_out[ep_num]; +} + +/** + * Gets the endpoint number from a _bEndpointAddress argument. The endpoint is + * qualified with its direction (possible 32 endpoints per device). + */ +#define dwc_ep_addr_to_endpoint(_bEndpointAddress_) \ + ((_bEndpointAddress_ & USB_ENDPOINT_NUMBER_MASK) | \ + ((_bEndpointAddress_ & USB_DIR_IN) != 0) << 4) + +/** Gets the QH that contains the list_head */ +#define dwc_list_to_qh(_list_head_ptr_) (container_of(_list_head_ptr_,dwc_otg_qh_t,qh_list_entry)) + +/** Gets the QTD that contains the list_head */ +#define dwc_list_to_qtd(_list_head_ptr_) (container_of(_list_head_ptr_,dwc_otg_qtd_t,qtd_list_entry)) + +/** Check if QH is non-periodic */ +#define dwc_qh_is_non_per(_qh_ptr_) ((_qh_ptr_->ep_type == USB_ENDPOINT_XFER_BULK) || \ + (_qh_ptr_->ep_type == USB_ENDPOINT_XFER_CONTROL)) + +/** High bandwidth multiplier as encoded in highspeed endpoint descriptors */ +#define dwc_hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03)) + +/** Packet size for any kind of endpoint descriptor */ +#define dwc_max_packet(wMaxPacketSize) ((wMaxPacketSize) & 0x07ff) + +/** + * Returns true if _frame1 is less than or equal to _frame2. The comparison is + * done modulo DWC_HFNUM_MAX_FRNUM. This accounts for the rollover of the + * frame number when the max frame number is reached. + */ +static inline int dwc_frame_num_le(uint16_t _frame1, uint16_t _frame2) +{ + return ((_frame2 - _frame1) & DWC_HFNUM_MAX_FRNUM) <= + (DWC_HFNUM_MAX_FRNUM >> 1); +} + +/** + * Returns true if _frame1 is greater than _frame2. The comparison is done + * modulo DWC_HFNUM_MAX_FRNUM. This accounts for the rollover of the frame + * number when the max frame number is reached. + */ +static inline int dwc_frame_num_gt(uint16_t _frame1, uint16_t _frame2) +{ + return (_frame1 != _frame2) && + (((_frame1 - _frame2) & DWC_HFNUM_MAX_FRNUM) < + (DWC_HFNUM_MAX_FRNUM >> 1)); +} + +/** + * Increments _frame by the amount specified by _inc. The addition is done + * modulo DWC_HFNUM_MAX_FRNUM. Returns the incremented value. + */ +static inline uint16_t dwc_frame_num_inc(uint16_t _frame, uint16_t _inc) +{ + return (_frame + _inc) & DWC_HFNUM_MAX_FRNUM; +} + +static inline uint16_t dwc_full_frame_num (uint16_t _frame) +{ + return ((_frame) & DWC_HFNUM_MAX_FRNUM) >> 3; +} + +static inline uint16_t dwc_micro_frame_num (uint16_t _frame) +{ + return (_frame) & 0x7; +} + +#ifdef CONFIG_DWC_DEBUG +/** + * Macro to sample the remaining PHY clocks left in the current frame. This + * may be used during debugging to determine the average time it takes to + * execute sections of code. There are two possible sample points, "a" and + * "b", so the _letter argument must be one of these values. + * + * To dump the average sample times, read the "hcd_frrem" sysfs attribute. For + * example, "cat /sys/devices/lm0/hcd_frrem". + */ +#define dwc_sample_frrem(_hcd, _qh, _letter) \ +{ \ + hfnum_data_t hfnum; \ + dwc_otg_qtd_t *qtd; \ + qtd = list_entry(_qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry); \ + if (usb_pipeint(qtd->urb->pipe) && _qh->start_split_frame != 0 && !qtd->complete_split) { \ + hfnum.d32 = dwc_read_reg32(&_hcd->core_if->host_if->host_global_regs->hfnum); \ + switch (hfnum.b.frnum & 0x7) { \ + case 7: \ + _hcd->hfnum_7_samples_##_letter++; \ + _hcd->hfnum_7_frrem_accum_##_letter += hfnum.b.frrem; \ + break; \ + case 0: \ + _hcd->hfnum_0_samples_##_letter++; \ + _hcd->hfnum_0_frrem_accum_##_letter += hfnum.b.frrem; \ + break; \ + default: \ + _hcd->hfnum_other_samples_##_letter++; \ + _hcd->hfnum_other_frrem_accum_##_letter += hfnum.b.frrem; \ + break; \ + } \ + } \ +} +#else +#define dwc_sample_frrem(_hcd, _qh, _letter) +#endif +#endif +#endif /* DWC_DEVICE_ONLY */ diff --git a/drivers/usb/gadget/dwc_otg/dwc_otg_hcd_intr.c b/drivers/usb/gadget/dwc_otg/dwc_otg_hcd_intr.c index 39a995f9948..153c9a98c4a 100644 --- a/drivers/usb/gadget/dwc_otg/dwc_otg_hcd_intr.c +++ b/drivers/usb/gadget/dwc_otg/dwc_otg_hcd_intr.c @@ -39,8 +39,7 @@ const int erratum_usb09_patched = 0; const int deferral_on = 1; -int nak_deferral_delay = 20; -module_param(nak_deferral_delay, int, 0644); +const int nak_deferral_delay = 8; const int nyet_deferral_delay = 1; /** @file @@ -527,7 +526,9 @@ static int update_urb_state_xfer_comp(dwc_hc_t * _hc, DWC_OTG_HC_XFER_COMPLETE, &short_read); if (short_read || (_urb->actual_length == _urb->transfer_buffer_length)) { xfer_done = 1; - if (short_read && (_urb->transfer_flags & URB_SHORT_NOT_OK)) { + if (_urb->actual_length == _urb->transfer_buffer_length) { + *status = 0; + } else if (short_read && (_urb->transfer_flags & URB_SHORT_NOT_OK)) { *status = -EREMOTEIO; } else { *status = 0; @@ -701,6 +702,7 @@ static void release_channel(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh; int deact = 1; int retry_delay = 1; + unsigned long flags; DWC_DEBUGPL(DBG_HCDV, " %s: channel %d, halt_status %d\n", __func__, _hc->hc_num, _halt_status); @@ -746,15 +748,22 @@ static void release_channel(dwc_otg_hcd_t * _hcd, */ goto cleanup; case DWC_OTG_HC_XFER_NO_HALT_STATUS: +#ifdef CONFIG_DWC_DEBUG DWC_ERROR("%s: No halt_status, channel %d\n", __func__, _hc->hc_num); +#endif free_qtd = 0; break; default: free_qtd = 0; break; } - *must_free = free_qtd; + if (free_qtd) { + /* Only change must_free to true (do not set to zero here -- it is + * pre-initialized to zero). + */ + *must_free = 1; + } if (deact) { deactivate_qh(_hcd, _hc->qh, free_qtd); } @@ -766,19 +775,10 @@ cleanup: */ dwc_otg_hc_cleanup(_hcd->core_if, _hc); list_add_tail(&_hc->hc_list_entry, &_hcd->free_hc_list); - switch (_hc->ep_type) { - case DWC_OTG_EP_TYPE_CONTROL: - case DWC_OTG_EP_TYPE_BULK: - _hcd->non_periodic_channels--; - break; - default: - /* - * Don't release reservations for periodic channels here. - * That's done when a periodic transfer is descheduled (i.e. - * when the QH is removed from the periodic schedule). - */ - break; - } + local_irq_save(flags); + _hcd->available_host_channels++; + local_irq_restore(flags); + /* Try to queue more transfers now that there's a free channel, */ /* unless erratum_usb09_patched is set */ if (!erratum_usb09_patched) { @@ -1139,7 +1139,6 @@ static int32_t handle_hc_nak_intr(dwc_otg_hcd_t * _hcd, break; } handle_nak_done:disable_hc_int(_hc_regs, nak); - clear_hc_int(_hc_regs, nak); return 1; } @@ -1210,6 +1209,8 @@ static int32_t handle_hc_ack_intr(dwc_otg_hcd_t * _hcd, * automatically executes the PING, then the transfer. */ halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_ACK, must_free); + } else { + halt_channel(_hcd, _hc, _qtd, _hc->halt_status, must_free); } } @@ -1218,7 +1219,6 @@ static int32_t handle_hc_ack_intr(dwc_otg_hcd_t * _hcd, * continue transferring data after clearing the error count. */ disable_hc_int(_hc_regs, ack); - clear_hc_int(_hc_regs, ack); return 1; } @@ -1489,7 +1489,7 @@ static int32_t handle_hc_datatglerr_intr(dwc_otg_hcd_t * _hcd, * @return 1 if halt status is ok, 0 otherwise. */ static inline int halt_status_ok(dwc_otg_hcd_t * _hcd, - dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd) + dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free) { hcchar_data_t hcchar; hctsiz_data_t hctsiz; @@ -1596,6 +1596,8 @@ static void handle_hc_chhltd_intr_dma(dwc_otg_hcd_t * _hcd, handle_hc_frmovrun_intr(_hcd, _hc, _hc_regs, _qtd, must_free); } else if (hcint.b.datatglerr) { handle_hc_datatglerr_intr(_hcd, _hc, _hc_regs, _qtd, must_free); + _hc->qh->data_toggle = 0; + halt_channel(_hcd, _hc, _qtd, _hc->halt_status, must_free); } else if (hcint.b.nak && !hcintmsk.b.nak) { /* * If nak is not masked, it's because a non-split IN transfer @@ -1630,10 +1632,13 @@ static void handle_hc_chhltd_intr_dma(dwc_otg_hcd_t * _hcd, halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE, must_free); } else { +#ifdef CONFIG_DWC_DEBUG DWC_ERROR("%s: Channel %d, DMA Mode -- ChHltd set, but reason " "for halting is unknown, nyet %d, hcint 0x%08x, intsts 0x%08x\n", __func__, _hc->hc_num, hcint.b.nyet, hcint.d32, dwc_read_reg32(&_hcd->core_if->core_global_regs->gintsts)); +#endif + halt_channel(_hcd, _hc, _qtd, _hc->halt_status, must_free); } } } @@ -1658,13 +1663,12 @@ static int32_t handle_hc_chhltd_intr(dwc_otg_hcd_t * _hcd, handle_hc_chhltd_intr_dma(_hcd, _hc, _hc_regs, _qtd, must_free); } else { #ifdef CONFIG_DWC_DEBUG - if (!halt_status_ok(_hcd, _hc, _hc_regs, _qtd)) { + if (!halt_status_ok(_hcd, _hc, _hc_regs, _qtd, must_free)) { return 1; } #endif /* */ release_channel(_hcd, _hc, _qtd, _hc->halt_status, must_free); } - clear_hc_int(_hc_regs, chhltd); return 1; } diff --git a/drivers/usb/gadget/dwc_otg/dwc_otg_hcd_intr.c.org b/drivers/usb/gadget/dwc_otg/dwc_otg_hcd_intr.c.org new file mode 100644 index 00000000000..39a995f9948 --- /dev/null +++ b/drivers/usb/gadget/dwc_otg/dwc_otg_hcd_intr.c.org @@ -0,0 +1,1746 @@ +/* ========================================================================== + * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_hcd_intr.c $ + * $Revision: #7 $ + * $Date: 2005/11/02 $ + * $Change: 553126 $ + * + * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, + * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless + * otherwise expressly agreed to in writing between Synopsys and you. + * + * The Software IS NOT an item of Licensed Software or Licensed Product under + * any End User Software License Agreement or Agreement for Licensed Product + * with Synopsys or any supplement thereto. You are permitted to use and + * redistribute this Software in source and binary forms, with or without + * modification, provided that redistributions of source code must retain this + * notice. You may not view, use, disclose, copy or distribute this file or + * any information contained herein except pursuant to this license grant from + * Synopsys. If you do not agree with this notice, including the disclaimer + * below, then you are not authorized to use the Software. + * + * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * ========================================================================== */ + +#ifndef CONFIG_DWC_DEVICE_ONLY + +#include "dwc_otg_driver.h" +#include "dwc_otg_hcd.h" +#include "dwc_otg_regs.h" + +const int erratum_usb09_patched = 0; +const int deferral_on = 1; +int nak_deferral_delay = 20; +module_param(nak_deferral_delay, int, 0644); +const int nyet_deferral_delay = 1; + +/** @file + * This file contains the implementation of the HCD Interrupt handlers. + */ + +/** This function handles interrupts for the HCD. */ +int32_t dwc_otg_hcd_handle_intr(dwc_otg_hcd_t * _dwc_otg_hcd) +{ + int retval = 0; + dwc_otg_core_if_t * core_if = _dwc_otg_hcd->core_if; + gintsts_data_t gintsts; + +#ifdef CONFIG_DWC_DEBUG + dwc_otg_core_global_regs_t * global_regs = core_if->core_global_regs; + +#endif /* */ + + /* Check if HOST Mode */ + if (dwc_otg_is_host_mode(core_if)) { + gintsts.d32 = dwc_otg_read_core_intr(core_if); + if (!gintsts.d32) { + return 0; + } +#ifdef CONFIG_DWC_DEBUG + /* Don't print debug message in the interrupt handler on SOF */ +#ifndef DEBUG_SOF + if (gintsts.d32 != DWC_SOF_INTR_MASK) +#endif + DWC_DEBUGPL(DBG_HCD, "\n"); +#endif /* */ + +#ifdef CONFIG_DWC_DEBUG +#ifndef DEBUG_SOF + if (gintsts.d32 != DWC_SOF_INTR_MASK) +#endif + DWC_DEBUGPL(DBG_HCD,"DWC OTG HCD Interrupt Detected gintsts&gintmsk=0x%08x\n", + gintsts.d32); +#endif /* */ + if (gintsts.b.sofintr) { + retval |= dwc_otg_hcd_handle_sof_intr(_dwc_otg_hcd); + } +#ifdef CONFIG_OTG_PLB_DMA_TASKLET + if (!atomic_read(&release_later) && gintsts.b.rxstsqlvl) { +#else + if (gintsts.b.rxstsqlvl) { +#endif + retval |= dwc_otg_hcd_handle_rx_status_q_level_intr(_dwc_otg_hcd); + } +#ifdef CONFIG_OTG_PLB_DMA_TASKLET + if (!atomic_read(&release_later) && gintsts.b.nptxfempty) { +#else + if (gintsts.b.nptxfempty) { +#endif + retval |= dwc_otg_hcd_handle_np_tx_fifo_empty_intr(_dwc_otg_hcd); + } + if (gintsts.b.i2cintr) { + /** @todo Implement i2cintr handler. */ + } + if (gintsts.b.portintr) { + retval |= dwc_otg_hcd_handle_port_intr(_dwc_otg_hcd); + } + if (gintsts.b.hcintr) { + retval |= dwc_otg_hcd_handle_hc_intr(_dwc_otg_hcd); + } + if (gintsts.b.ptxfempty) { + retval |= dwc_otg_hcd_handle_perio_tx_fifo_empty_intr(_dwc_otg_hcd); + } + +#ifdef CONFIG_DWC_DEBUG +#ifndef DEBUG_SOF + if (gintsts.d32 != DWC_SOF_INTR_MASK) +#endif + { + DWC_DEBUGPL(DBG_HCD, + "DWC OTG HCD Finished Servicing Interrupts\n"); + DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD gintsts=0x%08x\n", + dwc_read_reg32(&global_regs->gintsts)); + DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD gintmsk=0x%08x\n", + dwc_read_reg32(&global_regs->gintmsk)); + } +#endif /* */ + +#ifdef CONFIG_DWC_DEBUG +#ifndef DEBUG_SOF + if (gintsts.d32 != DWC_SOF_INTR_MASK) +#endif + DWC_DEBUGPL(DBG_HCD, "\n"); +#endif /* */ + } + return retval; +} + + +#ifdef DWC_TRACK_MISSED_SOFS +#warning Compiling code to track missed SOFs +#define FRAME_NUM_ARRAY_SIZE 1000 +/** + * This function is for debug only. + */ +static inline void track_missed_sofs(uint16_t _curr_frame_number) +{ + static uint16_t frame_num_array[FRAME_NUM_ARRAY_SIZE]; + static uint16_t last_frame_num_array[FRAME_NUM_ARRAY_SIZE]; + static int frame_num_idx = 0; + static uint16_t last_frame_num = DWC_HFNUM_MAX_FRNUM; + static int dumped_frame_num_array = 0; + if (frame_num_idx < FRAME_NUM_ARRAY_SIZE) { + if ((((last_frame_num + 1) & DWC_HFNUM_MAX_FRNUM) != + _curr_frame_number)) { + frame_num_array[frame_num_idx] = _curr_frame_number; + last_frame_num_array[frame_num_idx++] = last_frame_num; + } + } else if (!dumped_frame_num_array) { + int i; + printk(KERN_EMERG USB_DWC "Frame Last Frame\n"); + printk(KERN_EMERG USB_DWC "----- ----------\n"); + for (i = 0; i < FRAME_NUM_ARRAY_SIZE; i++) { + printk(KERN_EMERG USB_DWC "0x%04x 0x%04x\n", + frame_num_array[i], last_frame_num_array[i]); + } + dumped_frame_num_array = 1; + } + last_frame_num = _curr_frame_number; +} +#endif /* */ + +/** + * Handles the start-of-frame interrupt in host mode. Non-periodic + * transactions may be queued to the DWC_otg controller for the current + * (micro)frame. Periodic transactions may be queued to the controller for the + * next (micro)frame. + */ +int32_t dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd_t * _hcd) +{ + hfnum_data_t hfnum; + struct list_head *qh_entry; + dwc_otg_qh_t * qh; + dwc_otg_transaction_type_e tr_type; + gintsts_data_t gintsts = {.d32 = 0}; + hfnum.d32 = dwc_read_reg32(&_hcd->core_if->host_if->host_global_regs->hfnum); + +#ifdef DEBUG_SOF + DWC_DEBUGPL(DBG_HCD, "--Start of Frame Interrupt--\n"); +#endif /* */ + _hcd->frame_number = hfnum.b.frnum; +#ifdef CONFIG_DWC_DEBUG + _hcd->frrem_accum += hfnum.b.frrem; + _hcd->frrem_samples++; +#endif /* */ + +#ifdef DWC_TRACK_MISSED_SOFS + track_missed_sofs(_hcd->frame_number); +#endif /* */ + + /* Determine whether any periodic QHs should be executed. */ + qh_entry = _hcd->periodic_sched_inactive.next; + while (qh_entry != &_hcd->periodic_sched_inactive) { + qh = list_entry(qh_entry, dwc_otg_qh_t, qh_list_entry); + qh_entry = qh_entry->next; + if (dwc_frame_num_le(qh->sched_frame, _hcd->frame_number)) { + /* + * Move QH to the ready list to be executed next + * (micro)frame. + */ + list_move(&qh->qh_list_entry,&_hcd->periodic_sched_ready); + } + } + tr_type = dwc_otg_hcd_select_transactions(_hcd); + if (tr_type != DWC_OTG_TRANSACTION_NONE) { + dwc_otg_hcd_queue_transactions(_hcd, tr_type); + //schedule_work(&_hcd->hcd_queue_work); + } + + /* Clear interrupt */ + gintsts.b.sofintr = 1; + dwc_write_reg32(&_hcd->core_if->core_global_regs->gintsts,gintsts.d32); + return 1; +} + +/** Handles the Rx Status Queue Level Interrupt, which indicates that there is at + * least one packet in the Rx FIFO. The packets are moved from the FIFO to + * memory if the DWC_otg controller is operating in Slave mode. */ +int32_t dwc_otg_hcd_handle_rx_status_q_level_intr(dwc_otg_hcd_t *_dwc_otg_hcd) +{ + host_grxsts_data_t grxsts; + dwc_hc_t * hc = NULL; + DWC_DEBUGPL(DBG_HCD, "--RxStsQ Level Interrupt--\n"); + grxsts.d32 = dwc_read_reg32(&_dwc_otg_hcd->core_if->core_global_regs->grxstsp); + hc = _dwc_otg_hcd->hc_ptr_array[grxsts.b.chnum]; + + /* Packet Status */ + DWC_DEBUGPL(DBG_HCDV, " Ch num = %d\n", grxsts.b.chnum); + DWC_DEBUGPL(DBG_HCDV, " Count = %d\n", grxsts.b.bcnt); + DWC_DEBUGPL(DBG_HCDV, " DPID = %d, hc.dpid = %d\n", grxsts.b.dpid, + hc->data_pid_start); + DWC_DEBUGPL(DBG_HCDV, " PStatus = %d\n", grxsts.b.pktsts); + switch (grxsts.b.pktsts) { + case DWC_GRXSTS_PKTSTS_IN: + /* Read the data into the host buffer. */ + if (grxsts.b.bcnt > 0) { + dwc_otg_read_packet(_dwc_otg_hcd->core_if, + hc->xfer_buff, grxsts.b.bcnt); + + /* Update the HC fields for the next packet received. */ + hc->xfer_count += grxsts.b.bcnt; + hc->xfer_buff += grxsts.b.bcnt; + } + case DWC_GRXSTS_PKTSTS_IN_XFER_COMP: + case DWC_GRXSTS_PKTSTS_DATA_TOGGLE_ERR: + case DWC_GRXSTS_PKTSTS_CH_HALTED: + /* Handled in interrupt, just ignore data */ + break; + default: + DWC_ERROR("RX_STS_Q Interrupt: Unknown status %d\n", + grxsts.b.pktsts); + break; + } + return 1; +} + + +/** This interrupt occurs when the non-periodic Tx FIFO is half-empty. More + * data packets may be written to the FIFO for OUT transfers. More requests + * may be written to the non-periodic request queue for IN transfers. This + * interrupt is enabled only in Slave mode. */ +int32_t dwc_otg_hcd_handle_np_tx_fifo_empty_intr(dwc_otg_hcd_t * + _dwc_otg_hcd) +{ + DWC_DEBUGPL(DBG_HCD, "--Non-Periodic TxFIFO Empty Interrupt--\n"); + dwc_otg_hcd_queue_transactions(_dwc_otg_hcd, + DWC_OTG_TRANSACTION_NON_PERIODIC); + //schedule_work(&_dwc_otg_hcd->hcd_queue_work); + return 1; +} + + +/** This interrupt occurs when the periodic Tx FIFO is half-empty. More data + * packets may be written to the FIFO for OUT transfers. More requests may be + * written to the periodic request queue for IN transfers. This interrupt is + * enabled only in Slave mode. */ +int32_t dwc_otg_hcd_handle_perio_tx_fifo_empty_intr(dwc_otg_hcd_t * + _dwc_otg_hcd) +{ + DWC_DEBUGPL(DBG_HCD, "--Periodic TxFIFO Empty Interrupt--\n"); + dwc_otg_hcd_queue_transactions(_dwc_otg_hcd, + DWC_OTG_TRANSACTION_PERIODIC); + //schedule_work(&_dwc_otg_hcd->hcd_queue_work); + return 1; +} + + +/** There are multiple conditions that can cause a port interrupt. This function + * determines which interrupt conditions have occurred and handles them + * appropriately. */ +int32_t dwc_otg_hcd_handle_port_intr(dwc_otg_hcd_t * _dwc_otg_hcd) +{ + int retval = 0; + hprt0_data_t hprt0; + hprt0_data_t hprt0_modify; + hprt0.d32 = dwc_read_reg32(_dwc_otg_hcd->core_if->host_if->hprt0); + hprt0_modify.d32 = dwc_read_reg32(_dwc_otg_hcd->core_if->host_if->hprt0); + + /* Clear appropriate bits in HPRT0 to clear the interrupt bit in + * GINTSTS */ + hprt0_modify.b.prtena = 0; + hprt0_modify.b.prtconndet = 0; + hprt0_modify.b.prtenchng = 0; + hprt0_modify.b.prtovrcurrchng = 0; + + /* Port Connect Detected + * Set flag and clear if detected */ + if (hprt0.b.prtconndet) { + DWC_DEBUGPL(DBG_HCD, "--Port Interrupt HPRT0=0x%08x " + "Port Connect Detected--\n", hprt0.d32); + _dwc_otg_hcd->flags.b.port_connect_status_change = 1; + _dwc_otg_hcd->flags.b.port_connect_status = 1; + hprt0_modify.b.prtconndet = 1; + + /* B-Device has connected, Delete the connection timer. */ + del_timer(&_dwc_otg_hcd->conn_timer); + + /* The Hub driver asserts a reset when it sees port connect + * status change flag + */ + retval |= 1; + } + + /* Port Enable Changed + * Clear if detected - Set internal flag if disabled */ + if (hprt0.b.prtenchng) { + DWC_DEBUGPL(DBG_HCD, " --Port Interrupt HPRT0=0x%08x " + "Port Enable Changed--\n", hprt0.d32); + hprt0_modify.b.prtenchng = 1; + if (hprt0.b.prtena == 1) { + int do_reset = 0; + dwc_otg_core_params_t * params = + _dwc_otg_hcd->core_if->core_params; + dwc_otg_core_global_regs_t * global_regs = + _dwc_otg_hcd->core_if->core_global_regs; + dwc_otg_host_if_t * host_if = + _dwc_otg_hcd->core_if->host_if; + + /* Check if we need to adjust the PHY clock speed for + * low power and adjust it */ + if (params->host_support_fs_ls_low_power) { + gusbcfg_data_t usbcfg; + usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg); + if ((hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED) || + (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_FULL_SPEED)) { + /* + * Low power + */ + hcfg_data_t hcfg; + if (usbcfg.b.phylpwrclksel == 0) { + /* Set PHY low power clock select for FS/LS devices */ + usbcfg.b.phylpwrclksel = 1; + dwc_write_reg32(&global_regs->gusbcfg,usbcfg.d32); + do_reset = 1; + } + hcfg.d32 = dwc_read_reg32(&host_if->host_global_regs->hcfg); + if ((hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED) && + (params->host_ls_low_power_phy_clk == + DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ)) { + /* 6 MHZ */ + DWC_DEBUGPL(DBG_CIL,"FS_PHY programming HCFG to 6 MHz (Low Power)\n"); + if (hcfg.b.fslspclksel != DWC_HCFG_6_MHZ) { + hcfg.b.fslspclksel = DWC_HCFG_6_MHZ; + dwc_write_reg32(&host_if->host_global_regs->hcfg, hcfg.d32); + do_reset = 1; + } + } else { + /* 48 MHZ */ + DWC_DEBUGPL(DBG_CIL, "FS_PHY programming HCFG to 48 MHz ()\n"); + if (hcfg.b.fslspclksel != DWC_HCFG_48_MHZ) { + hcfg.b.fslspclksel = DWC_HCFG_48_MHZ; + dwc_write_reg32(&host_if->host_global_regs->hcfg, hcfg.d32); + do_reset = 1; + } + } + } else { + /* + * Not low power + */ + if (usbcfg.b.phylpwrclksel == 1) { + usbcfg.b.phylpwrclksel = 0; + dwc_write_reg32(&global_regs->gusbcfg,usbcfg.d32); + do_reset = 1; + } + } + if (do_reset) { + tasklet_schedule(_dwc_otg_hcd->reset_tasklet); + } + } + if (!do_reset) { + /* Port has been enabled set the reset change flag */ + _dwc_otg_hcd->flags.b.port_reset_change = 1; + } + } else { + _dwc_otg_hcd->flags.b.port_enable_change = 1; + } + retval |= 1; + } + + /** Overcurrent Change Interrupt */ + if (hprt0.b.prtovrcurrchng) { + DWC_DEBUGPL(DBG_HCD, " --Port Interrupt HPRT0=0x%08x " + "Port Overcurrent Changed--\n", hprt0.d32); + _dwc_otg_hcd->flags.b.port_over_current_change = 1; + hprt0_modify.b.prtovrcurrchng = 1; + retval |= 1; + } + + /* Clear Port Interrupts */ + dwc_write_reg32(_dwc_otg_hcd->core_if->host_if->hprt0,hprt0_modify.d32); + return retval; +} + +/** This interrupt indicates that one or more host channels has a pending + * interrupt. There are multiple conditions that can cause each host channel + * interrupt. This function determines which conditions have occurred for each + * host channel interrupt and handles them appropriately. */ +int32_t dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd_t * _dwc_otg_hcd) +{ + int i; + int retval = 0; + haint_data_t haint; + + /* Clear appropriate bits in HCINTn to clear the interrupt bit in + * GINTSTS */ + haint.d32 = dwc_otg_read_host_all_channels_intr(_dwc_otg_hcd->core_if); + for (i = 0; i < _dwc_otg_hcd->core_if->core_params->host_channels;i++) { + if (haint.b2.chint & (1 << i)) { + retval |= dwc_otg_hcd_handle_hc_n_intr(_dwc_otg_hcd, i); + } + } + return retval; +} + +/* Macro used to clear one channel interrupt */ +#define clear_hc_int(_hc_regs_,_intr_) \ + do { \ + hcint_data_t hcint_clear = { .d32 = 0}; \ + hcint_clear.b._intr_ = 1; \ + dwc_write_reg32(&((_hc_regs_)->hcint), hcint_clear.d32); \ + } while (0) + +/* + * Macro used to disable one channel interrupt. Channel interrupts are + * disabled when the channel is halted or released by the interrupt handler. + * There is no need to handle further interrupts of that type until the + * channel is re-assigned. In fact, subsequent handling may cause crashes + * because the channel structures are cleaned up when the channel is released. + */ +#define disable_hc_int(_hc_regs_,_intr_) \ + do { \ + hcintmsk_data_t hcintmsk = {.d32 = 0}; \ + hcintmsk.b._intr_ = 1; \ + dwc_modify_reg32(&((_hc_regs_)->hcintmsk), hcintmsk.d32, 0); \ + } while (0) + +/** + * Gets the actual length of a transfer after the transfer halts. _halt_status + * holds the reason for the halt. + * + * For IN transfers where _halt_status is DWC_OTG_HC_XFER_COMPLETE, + * *_short_read is set to 1 upon return if less than the requested + * number of bytes were transferred. Otherwise, *_short_read is set to 0 upon + * return. _short_read may also be NULL on entry, in which case it remains + * unchanged. + */ +static uint32_t get_actual_xfer_length(dwc_hc_t * _hc, + dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, + dwc_otg_halt_status_e _halt_status, int *_short_read) +{ + hctsiz_data_t hctsiz; + uint32_t length; + if (_short_read != NULL) { + *_short_read = 0; + } + hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz); + if (_halt_status == DWC_OTG_HC_XFER_COMPLETE) { + if (_hc->ep_is_in) { + length = _hc->xfer_len - hctsiz.b.xfersize; + if (_short_read != NULL) { + *_short_read = (hctsiz.b.xfersize != 0); + } + } else if (_hc->qh->do_split) { + length = _qtd->ssplit_out_xfer_count; + } else { + length = _hc->xfer_len; + } + } else { + /* + * Must use the hctsiz.pktcnt field to determine how much data + * has been transferred. This field reflects the number of + * packets that have been transferred via the USB. This is + * always an integral number of packets if the transfer was + * halted before its normal completion. (Can't use the + * hctsiz.xfersize field because that reflects the number of + * bytes transferred via the AHB, not the USB). + */ + length = (_hc->start_pkt_count - hctsiz.b.pktcnt) * _hc->max_packet; + } + return length; +} + +/** + * Updates the state of the URB after a Transfer Complete interrupt on the + * host channel. Updates the actual_length field of the URB based on the + * number of bytes transferred via the host channel. Sets the URB status + * if the data transfer is finished. + * + * @return 1 if the data transfer specified by the URB is completely finished, + * 0 otherwise. + */ +static int update_urb_state_xfer_comp(dwc_hc_t * _hc, + dwc_otg_hc_regs_t * _hc_regs, struct urb *_urb, + dwc_otg_qtd_t * _qtd, int *status) +{ + int xfer_done = 0; + int short_read = 0; + _urb->actual_length += get_actual_xfer_length(_hc, _hc_regs, _qtd, + DWC_OTG_HC_XFER_COMPLETE, &short_read); + if (short_read || (_urb->actual_length == _urb->transfer_buffer_length)) { + xfer_done = 1; + if (short_read && (_urb->transfer_flags & URB_SHORT_NOT_OK)) { + *status = -EREMOTEIO; + } else { + *status = 0; + } + } + +#ifdef CONFIG_DWC_DEBUG + { + hctsiz_data_t hctsiz; + hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz); + DWC_DEBUGPL(DBG_HCDV, "DWC_otg: %s: %s, channel %d\n", + __func__, (_hc->ep_is_in ? "IN" : "OUT"), _hc->hc_num); + DWC_DEBUGPL(DBG_HCDV, " hc->xfer_len %d\n", _hc->xfer_len); + DWC_DEBUGPL(DBG_HCDV, " hctsiz.xfersize %d\n",hctsiz.b.xfersize); + DWC_DEBUGPL(DBG_HCDV, " urb->transfer_buffer_length %d\n", + _urb->transfer_buffer_length); + DWC_DEBUGPL(DBG_HCDV, " urb->actual_length %d\n", + _urb->actual_length); + DWC_DEBUGPL(DBG_HCDV, " short_read %d, xfer_done %d\n", + short_read, xfer_done); + } +#endif /* */ + return xfer_done; +} + +/* + * Save the starting data toggle for the next transfer. The data toggle is + * saved in the QH for non-control transfers and it's saved in the QTD for + * control transfers. + */ +static void save_data_toggle(dwc_hc_t * _hc, + dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd) +{ + hctsiz_data_t hctsiz; + hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz); + if (_hc->ep_type != DWC_OTG_EP_TYPE_CONTROL) { + dwc_otg_qh_t * qh = _hc->qh; + if (hctsiz.b.pid == DWC_HCTSIZ_DATA0) { + qh->data_toggle = DWC_OTG_HC_PID_DATA0; + } else { + qh->data_toggle = DWC_OTG_HC_PID_DATA1; + } + } else { + if (hctsiz.b.pid == DWC_HCTSIZ_DATA0) { + _qtd->data_toggle = DWC_OTG_HC_PID_DATA0; + } else { + _qtd->data_toggle = DWC_OTG_HC_PID_DATA1; + } + } +} + +/** + * Frees the first QTD in the QH's list if free_qtd is 1. For non-periodic + * QHs, removes the QH from the active non-periodic schedule. If any QTDs are + * still linked to the QH, the QH is added to the end of the inactive + * non-periodic schedule. For periodic QHs, removes the QH from the periodic + * schedule if no more QTDs are linked to the QH. + */ +static void deactivate_qh(dwc_otg_hcd_t * _hcd, + dwc_otg_qh_t * _qh, int free_qtd) +{ + int continue_split = 0; + dwc_otg_qtd_t * qtd; + DWC_DEBUGPL(DBG_HCDV, " %s(%p,%p,%d)\n", __func__, _hcd, _qh, + free_qtd); + qtd = list_entry(_qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry); + if (qtd->complete_split) { + continue_split = 1; + } else if ((qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_MID) || + (qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_END)) { + continue_split = 1; + } + + if (free_qtd) { + /* + * Note that this was previously a call to + * dwc_otg_hcd_qtd_remove_and_free(qtd), which frees the qtd. + * However, that call frees the qtd memory, and we continue in the + * interrupt logic to access it many more times, including writing + * to it. With slub debugging on, it is clear that we were writing + * to memory we had freed. + * Call this instead, and now I have moved the freeing of the memory to + * the end of processing this interrupt. + */ + dwc_otg_hcd_qtd_remove(qtd); + + continue_split = 0; + } + _qh->channel = NULL; + _qh->qtd_in_process = NULL; + dwc_otg_hcd_qh_deactivate(_hcd, _qh, continue_split); +} + +/** + * Updates the state of an Isochronous URB when the transfer is stopped for + * any reason. The fields of the current entry in the frame descriptor array + * are set based on the transfer state and the input _halt_status. Completes + * the Isochronous URB if all the URB frames have been completed. + * + * @return DWC_OTG_HC_XFER_COMPLETE if there are more frames remaining to be + * transferred in the URB. Otherwise return DWC_OTG_HC_XFER_URB_COMPLETE. + */ +static dwc_otg_halt_status_e update_isoc_urb_state(dwc_otg_hcd_t * _hcd, + dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, + dwc_otg_halt_status_e _halt_status) +{ + struct urb *urb = _qtd->urb; + dwc_otg_halt_status_e ret_val = _halt_status; + struct usb_iso_packet_descriptor *frame_desc; + frame_desc = &urb->iso_frame_desc[_qtd->isoc_frame_index]; + switch (_halt_status) { + case DWC_OTG_HC_XFER_COMPLETE: + frame_desc->status = 0; + frame_desc->actual_length = + get_actual_xfer_length(_hc, _hc_regs, _qtd, _halt_status,NULL); + break; + case DWC_OTG_HC_XFER_FRAME_OVERRUN: + urb->error_count++; + if (_hc->ep_is_in) { + frame_desc->status = -ENOSR; + } else { + frame_desc->status = -ECOMM; + } + frame_desc->actual_length = 0; + break; + case DWC_OTG_HC_XFER_BABBLE_ERR: + urb->error_count++; + frame_desc->status = -EOVERFLOW; + + /* Don't need to update actual_length in this case. */ + break; + case DWC_OTG_HC_XFER_XACT_ERR: + urb->error_count++; + frame_desc->status = -EPROTO; + frame_desc->actual_length = + get_actual_xfer_length(_hc, _hc_regs, _qtd, _halt_status,NULL); + default: + DWC_ERROR("%s: Unhandled _halt_status (%d)\n", __func__, _halt_status); + BUG(); + break; + } + if (++_qtd->isoc_frame_index == urb->number_of_packets) { + /* + * urb->status is not used for isoc transfers. + * The individual frame_desc statuses are used instead. + */ + dwc_otg_hcd_complete_urb(_hcd, urb, 0); + ret_val = DWC_OTG_HC_XFER_URB_COMPLETE; + } else { + ret_val = DWC_OTG_HC_XFER_COMPLETE; + } + return ret_val; +} + +/** + * Releases a host channel for use by other transfers. Attempts to select and + * queue more transactions since at least one host channel is available. + * + * @param _hcd The HCD state structure. + * @param _hc The host channel to release. + * @param _qtd The QTD associated with the host channel. This QTD may be freed + * if the transfer is complete or an error has occurred. + * @param _halt_status Reason the channel is being released. This status + * determines the actions taken by this function. + */ + +static void release_channel(dwc_otg_hcd_t * _hcd, + dwc_hc_t * _hc, dwc_otg_qtd_t * _qtd, dwc_otg_halt_status_e _halt_status, int *must_free) { + dwc_otg_transaction_type_e tr_type; + int free_qtd; + dwc_otg_qh_t * _qh; + int deact = 1; + int retry_delay = 1; + + DWC_DEBUGPL(DBG_HCDV, " %s: channel %d, halt_status %d\n", __func__, + _hc->hc_num, _halt_status); + switch (_halt_status) { + case DWC_OTG_HC_XFER_NYET: + case DWC_OTG_HC_XFER_NAK: + if (_halt_status == DWC_OTG_HC_XFER_NYET) { + retry_delay = nyet_deferral_delay; + } else { + retry_delay = nak_deferral_delay; + } + free_qtd = 0; + if (deferral_on && _hc->do_split) { + _qh = _hc->qh; + if (_qh) { + deact = dwc_otg_hcd_qh_deferr(_hcd, _qh , retry_delay); + } + } + break; + + case DWC_OTG_HC_XFER_URB_COMPLETE: + free_qtd = 1; + break; + case DWC_OTG_HC_XFER_AHB_ERR: + case DWC_OTG_HC_XFER_STALL: + case DWC_OTG_HC_XFER_BABBLE_ERR: + free_qtd = 1; + break; + case DWC_OTG_HC_XFER_XACT_ERR: + if (_qtd->error_count >= 3) { + DWC_DEBUGPL(DBG_HCDV, " Complete URB with transaction error\n"); + free_qtd = 1; + dwc_otg_hcd_complete_urb(_hcd, _qtd->urb, -EPROTO); + } else { + free_qtd = 0; + } + break; + case DWC_OTG_HC_XFER_URB_DEQUEUE: + /* + * The QTD has already been removed and the QH has been + * deactivated. Don't want to do anything except release the + * host channel and try to queue more transfers. + */ + goto cleanup; + case DWC_OTG_HC_XFER_NO_HALT_STATUS: + DWC_ERROR("%s: No halt_status, channel %d\n", __func__, + _hc->hc_num); + free_qtd = 0; + break; + default: + free_qtd = 0; + break; + } + *must_free = free_qtd; + if (deact) { + deactivate_qh(_hcd, _hc->qh, free_qtd); + } +cleanup: + /* + * Release the host channel for use by other transfers. The cleanup + * function clears the channel interrupt enables and conditions, so + * there's no need to clear the Channel Halted interrupt separately. + */ + dwc_otg_hc_cleanup(_hcd->core_if, _hc); + list_add_tail(&_hc->hc_list_entry, &_hcd->free_hc_list); + switch (_hc->ep_type) { + case DWC_OTG_EP_TYPE_CONTROL: + case DWC_OTG_EP_TYPE_BULK: + _hcd->non_periodic_channels--; + break; + default: + /* + * Don't release reservations for periodic channels here. + * That's done when a periodic transfer is descheduled (i.e. + * when the QH is removed from the periodic schedule). + */ + break; + } + /* Try to queue more transfers now that there's a free channel, */ + /* unless erratum_usb09_patched is set */ + if (!erratum_usb09_patched) { + tr_type = dwc_otg_hcd_select_transactions(_hcd); + if (tr_type != DWC_OTG_TRANSACTION_NONE) { + dwc_otg_hcd_queue_transactions(_hcd, tr_type); + } + } +} + +/** + * Halts a host channel. If the channel cannot be halted immediately because + * the request queue is full, this function ensures that the FIFO empty + * interrupt for the appropriate queue is enabled so that the halt request can + * be queued when there is space in the request queue. + * + * This function may also be called in DMA mode. In that case, the channel is + * simply released since the core always halts the channel automatically in + * DMA mode. + */ +static void halt_channel(dwc_otg_hcd_t * _hcd, + dwc_hc_t * _hc, dwc_otg_qtd_t * _qtd, dwc_otg_halt_status_e _halt_status, int *must_free) +{ + if (_hcd->core_if->dma_enable) { + release_channel(_hcd, _hc, _qtd, _halt_status, must_free); + return; + } + + /* Slave mode processing... */ + dwc_otg_hc_halt(_hcd->core_if, _hc, _halt_status); + if (_hc->halt_on_queue) { + gintmsk_data_t gintmsk = {.d32 = 0}; + dwc_otg_core_global_regs_t * global_regs; + global_regs = _hcd->core_if->core_global_regs; + if (_hc->ep_type == DWC_OTG_EP_TYPE_CONTROL || + _hc->ep_type == DWC_OTG_EP_TYPE_BULK) { + /* + * Make sure the Non-periodic Tx FIFO empty interrupt + * is enabled so that the non-periodic schedule will + * be processed. + */ + gintmsk.b.nptxfempty = 1; + dwc_modify_reg32(&global_regs->gintmsk, 0, gintmsk.d32); + } else { + /* + * Move the QH from the periodic queued schedule to + * the periodic assigned schedule. This allows the + * halt to be queued when the periodic schedule is + * processed. + */ + list_move(&_hc->qh->qh_list_entry, + &_hcd->periodic_sched_assigned); + + /* + * Make sure the Periodic Tx FIFO Empty interrupt is + * enabled so that the periodic schedule will be + * processed. + */ + gintmsk.b.ptxfempty = 1; + dwc_modify_reg32(&global_regs->gintmsk, 0,gintmsk.d32); + } + } +} + +/** + * Performs common cleanup for non-periodic transfers after a Transfer + * Complete interrupt. This function should be called after any endpoint type + * specific handling is finished to release the host channel. + */ +static void complete_non_periodic_xfer(dwc_otg_hcd_t * _hcd, + dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, + dwc_otg_halt_status_e _halt_status, int *must_free) +{ + hcint_data_t hcint; + _qtd->error_count = 0; + hcint.d32 = dwc_read_reg32(&_hc_regs->hcint); + if (hcint.b.nyet) { + /* + * Got a NYET on the last transaction of the transfer. This + * means that the endpoint should be in the PING state at the + * beginning of the next transfer. + */ + _hc->qh->ping_state = 1; + clear_hc_int(_hc_regs, nyet); + } + + /* + * Always halt and release the host channel to make it available for + * more transfers. There may still be more phases for a control + * transfer or more data packets for a bulk transfer at this point, + * but the host channel is still halted. A channel will be reassigned + * to the transfer when the non-periodic schedule is processed after + * the channel is released. This allows transactions to be queued + * properly via dwc_otg_hcd_queue_transactions, which also enables the + * Tx FIFO Empty interrupt if necessary. + */ + if (_hc->ep_is_in) { + /* + * IN transfers in Slave mode require an explicit disable to + * halt the channel. (In DMA mode, this call simply releases + * the channel.) + */ + halt_channel(_hcd, _hc, _qtd, _halt_status, must_free); + } else { + /* + * The channel is automatically disabled by the core for OUT + * transfers in Slave mode. + */ + release_channel(_hcd, _hc, _qtd, _halt_status, must_free); + } +} + +/** + * Performs common cleanup for periodic transfers after a Transfer Complete + * interrupt. This function should be called after any endpoint type specific + * handling is finished to release the host channel. + */ +static void complete_periodic_xfer(dwc_otg_hcd_t * _hcd, + dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, + dwc_otg_halt_status_e _halt_status, int *must_free) +{ + hctsiz_data_t hctsiz; + _qtd->error_count = 0; + hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz); + if (!_hc->ep_is_in || hctsiz.b.pktcnt == 0) { + /* Core halts channel in these cases. */ + release_channel(_hcd, _hc, _qtd, _halt_status, must_free); + } else { + /* Flush any outstanding requests from the Tx queue. */ + halt_channel(_hcd, _hc, _qtd, _halt_status, must_free); + } +} + +/** + * Handles a host channel Transfer Complete interrupt. This handler may be + * called in either DMA mode or Slave mode. + */ +static int32_t handle_hc_xfercomp_intr(dwc_otg_hcd_t * _hcd, + dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free) +{ + int urb_xfer_done; + dwc_otg_halt_status_e halt_status = DWC_OTG_HC_XFER_COMPLETE; + struct urb *urb = _qtd->urb; + int pipe_type = usb_pipetype(urb->pipe); + int status = -EINPROGRESS; + + DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " + "Transfer Complete--\n", _hc->hc_num); + + /* + * Handle xfer complete on CSPLIT. + */ + if (_hc->qh->do_split) { + _qtd->complete_split = 0; + } + + /* Update the QTD and URB states. */ + switch (pipe_type) { + case PIPE_CONTROL: + switch (_qtd->control_phase) { + case DWC_OTG_CONTROL_SETUP: + if (urb->transfer_buffer_length > 0) { + _qtd->control_phase = DWC_OTG_CONTROL_DATA; + } else { + _qtd->control_phase = DWC_OTG_CONTROL_STATUS; + } + DWC_DEBUGPL(DBG_HCDV, + " Control setup transaction done\n"); + halt_status = DWC_OTG_HC_XFER_COMPLETE; + break; + case DWC_OTG_CONTROL_DATA:{ + urb_xfer_done = update_urb_state_xfer_comp(_hc, _hc_regs,urb, _qtd, &status); + if (urb_xfer_done) { + _qtd->control_phase = DWC_OTG_CONTROL_STATUS; + DWC_DEBUGPL(DBG_HCDV," Control data transfer done\n"); + } else { + save_data_toggle(_hc, _hc_regs, _qtd); + } + halt_status = DWC_OTG_HC_XFER_COMPLETE; + break; + } + case DWC_OTG_CONTROL_STATUS: + DWC_DEBUGPL(DBG_HCDV, " Control transfer complete\n"); + if (status == -EINPROGRESS) { + status = 0; + } + dwc_otg_hcd_complete_urb(_hcd, urb, status); + halt_status = DWC_OTG_HC_XFER_URB_COMPLETE; + break; + } + complete_non_periodic_xfer(_hcd, _hc, _hc_regs, _qtd, + halt_status, must_free); + break; + case PIPE_BULK: + DWC_DEBUGPL(DBG_HCDV, " Bulk transfer complete\n"); + urb_xfer_done = update_urb_state_xfer_comp(_hc, _hc_regs, urb, _qtd, &status); + if (urb_xfer_done) { + dwc_otg_hcd_complete_urb(_hcd, urb, status); + halt_status = DWC_OTG_HC_XFER_URB_COMPLETE; + } else { + halt_status = DWC_OTG_HC_XFER_COMPLETE; + } + save_data_toggle(_hc, _hc_regs, _qtd); + complete_non_periodic_xfer(_hcd, _hc, _hc_regs, _qtd,halt_status, must_free); + break; + case PIPE_INTERRUPT: + DWC_DEBUGPL(DBG_HCDV, " Interrupt transfer complete\n"); + update_urb_state_xfer_comp(_hc, _hc_regs, urb, _qtd, &status); + /* + * Interrupt URB is done on the first transfer complete + * interrupt. + */ + dwc_otg_hcd_complete_urb(_hcd, urb, status); + save_data_toggle(_hc, _hc_regs, _qtd); + complete_periodic_xfer(_hcd, _hc, _hc_regs, _qtd, + DWC_OTG_HC_XFER_URB_COMPLETE, must_free); + break; + case PIPE_ISOCHRONOUS: + DWC_DEBUGPL(DBG_HCDV, " Isochronous transfer complete\n"); + if (_qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_ALL) { + halt_status = update_isoc_urb_state(_hcd, _hc, _hc_regs, _qtd, + DWC_OTG_HC_XFER_COMPLETE); + } + complete_periodic_xfer(_hcd, _hc, _hc_regs, _qtd, halt_status, must_free); + break; + } + disable_hc_int(_hc_regs, xfercompl); + return 1; +} + +/** + * Handles a host channel STALL interrupt. This handler may be called in + * either DMA mode or Slave mode. + */ +static int32_t handle_hc_stall_intr(dwc_otg_hcd_t * _hcd, + dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free) +{ + struct urb *urb = _qtd->urb; + int pipe_type = usb_pipetype(urb->pipe); + DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " + "STALL Received--\n", _hc->hc_num); + if (pipe_type == PIPE_CONTROL) { + dwc_otg_hcd_complete_urb(_hcd, _qtd->urb, -EPIPE); + } + if (pipe_type == PIPE_BULK || pipe_type == PIPE_INTERRUPT) { + dwc_otg_hcd_complete_urb(_hcd, _qtd->urb, -EPIPE); + /* + * USB protocol requires resetting the data toggle for bulk + * and interrupt endpoints when a CLEAR_FEATURE(ENDPOINT_HALT) + * setup command is issued to the endpoint. Anticipate the + * CLEAR_FEATURE command since a STALL has occurred and reset + * the data toggle now. + */ + _hc->qh->data_toggle = 0; + } + halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_STALL, must_free); + disable_hc_int(_hc_regs, stall); + return 1; +} + +/* + * Updates the state of the URB when a transfer has been stopped due to an + * abnormal condition before the transfer completes. Modifies the + * actual_length field of the URB to reflect the number of bytes that have + * actually been transferred via the host channel. + */ +static void update_urb_state_xfer_intr(dwc_hc_t * _hc, + dwc_otg_hc_regs_t * _hc_regs, struct urb *_urb, dwc_otg_qtd_t * _qtd, + dwc_otg_halt_status_e _halt_status) +{ + uint32_t bytes_transferred = + get_actual_xfer_length(_hc, _hc_regs, _qtd, _halt_status, NULL); + _urb->actual_length += bytes_transferred; + +#ifdef CONFIG_DWC_DEBUG + { + hctsiz_data_t hctsiz; + hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz); + DWC_DEBUGPL(DBG_HCDV, "DWC_otg: %s: %s, channel %d\n", + __func__, (_hc->ep_is_in ? "IN" : "OUT"),_hc->hc_num); + DWC_DEBUGPL(DBG_HCDV, " _hc->start_pkt_count %d\n", + _hc->start_pkt_count); + DWC_DEBUGPL(DBG_HCDV, " hctsiz.pktcnt %d\n", hctsiz.b.pktcnt); + DWC_DEBUGPL(DBG_HCDV, " _hc->max_packet %d\n",_hc->max_packet); + DWC_DEBUGPL(DBG_HCDV, " bytes_transferred %d\n", + bytes_transferred); + DWC_DEBUGPL(DBG_HCDV, " _urb->actual_length %d\n", + _urb->actual_length); + DWC_DEBUGPL(DBG_HCDV, " _urb->transfer_buffer_length %d\n", + _urb->transfer_buffer_length); + } +#endif /* */ +} + +/** + * Handles a host channel NAK interrupt. This handler may be called in either + * DMA mode or Slave mode. + */ +static int32_t handle_hc_nak_intr(dwc_otg_hcd_t * _hcd, + dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free) { + DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " + "NAK Received--\n", _hc->hc_num); + /* + * Handle NAK for IN/OUT SSPLIT/CSPLIT transfers, bulk, control, and + * interrupt. Re-start the SSPLIT transfer. + */ + if (_hc->do_split) { + if (_hc->complete_split) { + _qtd->error_count = 0; + } + _qtd->complete_split = 0; + halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_NAK, must_free); + goto handle_nak_done; + } + switch (usb_pipetype(_qtd->urb->pipe)) { + case PIPE_CONTROL: + case PIPE_BULK: + if (_hcd->core_if->dma_enable && _hc->ep_is_in) { + /* + * NAK interrupts are enabled on bulk/control IN + * transfers in DMA mode for the sole purpose of + * resetting the error count after a transaction error + * occurs. The core will continue transferring data. + */ + _qtd->error_count = 0; + goto handle_nak_done; + } + + /* + * NAK interrupts normally occur during OUT transfers in DMA + * or Slave mode. For IN transfers, more requests will be + * queued as request queue space is available. + */ + _qtd->error_count = 0; + if (!_hc->qh->ping_state) { + update_urb_state_xfer_intr(_hc, _hc_regs, _qtd->urb, + _qtd, DWC_OTG_HC_XFER_NAK); + save_data_toggle(_hc, _hc_regs, _qtd); + if (_qtd->urb->dev->speed == USB_SPEED_HIGH) { + _hc->qh->ping_state = 1; + } + } + + /* + * Halt the channel so the transfer can be re-started from + * the appropriate point or the PING protocol will + * start/continue. + */ + halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_NAK, must_free); + break; + case PIPE_INTERRUPT: + _qtd->error_count = 0; + halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_NAK, must_free); + break; + case PIPE_ISOCHRONOUS: + /* Should never get called for isochronous transfers. */ + BUG(); + break; + } + handle_nak_done:disable_hc_int(_hc_regs, nak); + clear_hc_int(_hc_regs, nak); + return 1; +} + +/** + * Handles a host channel ACK interrupt. This interrupt is enabled when + * performing the PING protocol in Slave mode, when errors occur during + * either Slave mode or DMA mode, and during Start Split transactions. + */ +static int32_t handle_hc_ack_intr(dwc_otg_hcd_t * _hcd, + dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free) +{ + DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " + "ACK Received--\n", _hc->hc_num); + if (_hc->do_split) { + /* + * Handle ACK on SSPLIT. + * ACK should not occur in CSPLIT. + */ + if ((!_hc->ep_is_in) && (_hc->data_pid_start != DWC_OTG_HC_PID_SETUP)) { + _qtd->ssplit_out_xfer_count = _hc->xfer_len; + } + if (!(_hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !_hc->ep_is_in)) { + /* Don't need complete for isochronous out transfers. */ + _qtd->complete_split = 1; + } + + /* ISOC OUT */ + if ((_hc->ep_type == DWC_OTG_EP_TYPE_ISOC) && !_hc->ep_is_in) { + switch (_hc->xact_pos) { + case DWC_HCSPLIT_XACTPOS_ALL: + break; + case DWC_HCSPLIT_XACTPOS_END: + _qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_ALL; + _qtd->isoc_split_offset = 0; + break; + case DWC_HCSPLIT_XACTPOS_BEGIN: + case DWC_HCSPLIT_XACTPOS_MID: + /* + * For BEGIN or MID, calculate the length for + * the next microframe to determine the correct + * SSPLIT token, either MID or END. + */ + do { + struct usb_iso_packet_descriptor *frame_desc; + frame_desc = &_qtd->urb->iso_frame_desc[_qtd->isoc_frame_index]; + _qtd->isoc_split_offset += 188; + if ((frame_desc->length - _qtd->isoc_split_offset) <=188) { + _qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_END; + } else { + _qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_MID; + } + } while (0); + break; + } + } else { + halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_ACK, must_free); + } + } else { + _qtd->error_count = 0; + if (_hc->qh->ping_state) { + _hc->qh->ping_state = 0; + + /* + * Halt the channel so the transfer can be re-started + * from the appropriate point. This only happens in + * Slave mode. In DMA mode, the ping_state is cleared + * when the transfer is started because the core + * automatically executes the PING, then the transfer. + */ + halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_ACK, must_free); + } + } + + /* + * If the ACK occurred when _not_ in the PING state, let the channel + * continue transferring data after clearing the error count. + */ + disable_hc_int(_hc_regs, ack); + clear_hc_int(_hc_regs, ack); + return 1; +} + +/** + * Handles a host channel NYET interrupt. This interrupt should only occur on + * Bulk and Control OUT endpoints and for complete split transactions. If a + * NYET occurs at the same time as a Transfer Complete interrupt, it is + * handled in the xfercomp interrupt handler, not here. This handler may be + * called in either DMA mode or Slave mode. + */ +static int32_t handle_hc_nyet_intr(dwc_otg_hcd_t * _hcd, + dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free) +{ + DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " + "NYET Received--\n", _hc->hc_num); + + /* + * NYET on CSPLIT + * re-do the CSPLIT immediately on non-periodic + */ + if ((_hc->do_split) && (_hc->complete_split)) { + if ((_hc->ep_type == DWC_OTG_EP_TYPE_INTR) || + (_hc->ep_type == DWC_OTG_EP_TYPE_ISOC)) { + int frnum = dwc_otg_hcd_get_frame_number(dwc_otg_hcd_to_hcd + (_hcd)); + if (dwc_full_frame_num(frnum) != + dwc_full_frame_num(_hc->qh->sched_frame)) { + + /* + * No longer in the same full speed frame. + * Treat this as a transaction error. + */ +#if 0 + /** @todo Fix system performance so this can + * be treated as an error. Right now complete + * splits cannot be scheduled precisely enough + * due to other system activity, so this error + * occurs regularly in Slave mode. + */ + _qtd->error_count++; + +#endif /* */ + _qtd->complete_split = 0; + halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_XACT_ERR, must_free); + + /** @todo add support for isoc release */ + goto handle_nyet_done; + } + } + halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_NYET, must_free); + goto handle_nyet_done; + } + _hc->qh->ping_state = 1; + _qtd->error_count = 0; + update_urb_state_xfer_intr(_hc, _hc_regs, _qtd->urb, _qtd, + DWC_OTG_HC_XFER_NYET); + save_data_toggle(_hc, _hc_regs, _qtd); + + /* + * Halt the channel and re-start the transfer so the PING + * protocol will start. + */ + halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_NYET, must_free); +handle_nyet_done: + disable_hc_int(_hc_regs, nyet); + clear_hc_int(_hc_regs, nyet); + + return 1; +} + +/** + * Handles a host channel babble interrupt. This handler may be called in + * either DMA mode or Slave mode. + */ +static int32_t handle_hc_babble_intr(dwc_otg_hcd_t * _hcd, + dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free) +{ + DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " + "Babble Error--\n", _hc->hc_num); + if (_hc->ep_type != DWC_OTG_EP_TYPE_ISOC) { + dwc_otg_hcd_complete_urb(_hcd, _qtd->urb, -EOVERFLOW); + halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_BABBLE_ERR, must_free); + } else { + dwc_otg_halt_status_e halt_status; + halt_status = update_isoc_urb_state(_hcd, _hc, _hc_regs, _qtd, + DWC_OTG_HC_XFER_BABBLE_ERR); + halt_channel(_hcd, _hc, _qtd, halt_status, must_free); + } + disable_hc_int(_hc_regs, bblerr); + return 1; +} + +/** + * Handles a host channel AHB error interrupt. This handler is only called in + * DMA mode. + */ +static int32_t handle_hc_ahberr_intr(dwc_otg_hcd_t * _hcd, + dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd) +{ + hcchar_data_t hcchar; + hcsplt_data_t hcsplt; + hctsiz_data_t hctsiz; + uint32_t hcdma; + struct urb *urb = _qtd->urb; + DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " + "AHB Error--\n", _hc->hc_num); + hcchar.d32 = dwc_read_reg32(&_hc_regs->hcchar); + hcsplt.d32 = dwc_read_reg32(&_hc_regs->hcsplt); + hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz); + hcdma = dwc_read_reg32(&_hc_regs->hcdma); + DWC_ERROR("AHB ERROR, Channel %d\n", _hc->hc_num); + DWC_ERROR(" hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, hcsplt.d32); + DWC_ERROR(" hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32, hcdma); + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Enqueue\n"); + DWC_ERROR(" Device address: %d\n", usb_pipedevice(urb->pipe)); + DWC_ERROR(" Endpoint: %d, %s\n", usb_pipeendpoint(urb->pipe), + (usb_pipein(urb->pipe) ? "IN" : "OUT")); + DWC_ERROR(" Endpoint type: %s\n", ( { + char *pipetype; + switch (usb_pipetype(urb->pipe)) { + case PIPE_CONTROL: + pipetype = "CONTROL"; break; + case PIPE_BULK: + pipetype = "BULK"; break; + case PIPE_INTERRUPT: + pipetype = "INTERRUPT"; break; + case PIPE_ISOCHRONOUS: + pipetype = "ISOCHRONOUS"; break; + default: + pipetype = "UNKNOWN"; break; + }; + pipetype; + } )) ; + DWC_ERROR(" Speed: %s\n", ( { + char *speed; + switch (urb->dev->speed) { + case USB_SPEED_HIGH: + speed = "HIGH"; break; + case USB_SPEED_FULL: + speed = "FULL"; break; + case USB_SPEED_LOW: + speed = "LOW"; break; + default: + speed = "UNKNOWN"; break; + }; + speed; + } )) ; + DWC_ERROR(" Max packet size: %d\n", + usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe))); + DWC_ERROR(" Data buffer length: %d\n", urb->transfer_buffer_length); + DWC_ERROR(" Transfer buffer: %p, Transfer DMA: %p\n", + urb->transfer_buffer, (void *)(u32)urb->transfer_dma); + DWC_ERROR(" Setup buffer: %p, Setup DMA: %p\n", urb->setup_packet, + (void *)(u32)urb->setup_dma); + DWC_ERROR(" Interval: %d\n", urb->interval); + dwc_otg_hcd_complete_urb(_hcd, urb, -EIO); + + /* + * Force a channel halt. Don't call halt_channel because that won't + * write to the HCCHARn register in DMA mode to force the halt. + */ + dwc_otg_hc_halt(_hcd->core_if, _hc, DWC_OTG_HC_XFER_AHB_ERR); + disable_hc_int(_hc_regs, ahberr); + return 1; +} + +/** + * Handles a host channel transaction error interrupt. This handler may be + * called in either DMA mode or Slave mode. + */ +static int32_t handle_hc_xacterr_intr(dwc_otg_hcd_t * _hcd, + dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free) +{ + DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " + "Transaction Error--\n", _hc->hc_num); + switch (usb_pipetype(_qtd->urb->pipe)) { + case PIPE_CONTROL: + case PIPE_BULK: + _qtd->error_count++; + if (!_hc->qh->ping_state) { + update_urb_state_xfer_intr(_hc, _hc_regs, _qtd->urb, + _qtd, DWC_OTG_HC_XFER_XACT_ERR); + save_data_toggle(_hc, _hc_regs, _qtd); + if (!_hc->ep_is_in && _qtd->urb->dev->speed == USB_SPEED_HIGH) { + _hc->qh->ping_state = 1; + } + } + + /* + * Halt the channel so the transfer can be re-started from + * the appropriate point or the PING protocol will start. + */ + halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_XACT_ERR, must_free); + break; + case PIPE_INTERRUPT: + _qtd->error_count++; + if ((_hc->do_split) && (_hc->complete_split)) { + _qtd->complete_split = 0; + } + halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_XACT_ERR, must_free); + break; + case PIPE_ISOCHRONOUS: + { + dwc_otg_halt_status_e halt_status; + halt_status = update_isoc_urb_state(_hcd, _hc, _hc_regs, _qtd, + DWC_OTG_HC_XFER_XACT_ERR); + halt_channel(_hcd, _hc, _qtd, halt_status, must_free); + } + break; + } + disable_hc_int(_hc_regs, xacterr); + return 1; +} + +/** + * Handles a host channel frame overrun interrupt. This handler may be called + * in either DMA mode or Slave mode. + */ +static int32_t handle_hc_frmovrun_intr(dwc_otg_hcd_t * _hcd, + dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free) +{ + DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " + "Frame Overrun--\n", _hc->hc_num); + switch (usb_pipetype(_qtd->urb->pipe)) { + case PIPE_CONTROL: + case PIPE_BULK: + break; + case PIPE_INTERRUPT: + halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_FRAME_OVERRUN, must_free); + break; + case PIPE_ISOCHRONOUS: + { + dwc_otg_halt_status_e halt_status; + halt_status = update_isoc_urb_state(_hcd, _hc, _hc_regs, _qtd, + DWC_OTG_HC_XFER_FRAME_OVERRUN); + halt_channel(_hcd, _hc, _qtd, halt_status, must_free); + } + break; + } + disable_hc_int(_hc_regs, frmovrun); + return 1; +} + +/** + * Handles a host channel data toggle error interrupt. This handler may be + * called in either DMA mode or Slave mode. + */ +static int32_t handle_hc_datatglerr_intr(dwc_otg_hcd_t * _hcd, + dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free) +{ + DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " + "Data Toggle Error--\n", _hc->hc_num); + if (_hc->ep_is_in) { + _qtd->error_count = 0; + } else { + DWC_ERROR("Data Toggle Error on OUT transfer," + "channel %d\n", _hc->hc_num); + } + disable_hc_int(_hc_regs, datatglerr); + return 1; +} + +#ifdef CONFIG_DWC_DEBUG +/** + * This function is for debug only. It checks that a valid halt status is set + * and that HCCHARn.chdis is clear. If there's a problem, corrective action is + * taken and a warning is issued. + * @return 1 if halt status is ok, 0 otherwise. + */ +static inline int halt_status_ok(dwc_otg_hcd_t * _hcd, + dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd) +{ + hcchar_data_t hcchar; + hctsiz_data_t hctsiz; + hcint_data_t hcint; + hcintmsk_data_t hcintmsk; + hcsplt_data_t hcsplt; + if (_hc->halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS) { + /* + * This code is here only as a check. This condition should + * never happen. Ignore the halt if it does occur. + */ + hcchar.d32 = dwc_read_reg32(&_hc_regs->hcchar); + hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz); + hcint.d32 = dwc_read_reg32(&_hc_regs->hcint); + hcintmsk.d32 = dwc_read_reg32(&_hc_regs->hcintmsk); + hcsplt.d32 = dwc_read_reg32(&_hc_regs->hcsplt); + DWC_WARN("%s: _hc->halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS, " + "channel %d, hcchar 0x%08x, hctsiz 0x%08x, " + "hcint 0x%08x, hcintmsk 0x%08x, " + "hcsplt 0x%08x, qtd->complete_split %d\n", __func__, + _hc->hc_num, hcchar.d32, hctsiz.d32, hcint.d32, + hcintmsk.d32, hcsplt.d32, _qtd->complete_split); + DWC_WARN("%s: no halt status, channel %d, ignoring interrupt\n", + __func__, _hc->hc_num); + DWC_WARN("\n"); + clear_hc_int(_hc_regs, chhltd); + return 0; + } + + /* + * This code is here only as a check. hcchar.chdis should + * never be set when the halt interrupt occurs. Halt the + * channel again if it does occur. + */ + hcchar.d32 = dwc_read_reg32(&_hc_regs->hcchar); + if (hcchar.b.chdis) { + DWC_WARN("%s: hcchar.chdis set unexpectedly, " + "hcchar 0x%08x, trying to halt again\n", __func__, + hcchar.d32); + clear_hc_int(_hc_regs, chhltd); + _hc->halt_pending = 0; + halt_channel(_hcd, _hc, _qtd, _hc->halt_status, must_free); + return 0; + } + return 1; +} +#endif /* */ + +/** + * Handles a host Channel Halted interrupt in DMA mode. This handler + * determines the reason the channel halted and proceeds accordingly. + */ +static void handle_hc_chhltd_intr_dma(dwc_otg_hcd_t * _hcd, + dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free) +{ + hcint_data_t hcint; + hcintmsk_data_t hcintmsk; + if (_hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE || + _hc->halt_status == DWC_OTG_HC_XFER_AHB_ERR) { + /* + * Just release the channel. A dequeue can happen on a + * transfer timeout. In the case of an AHB Error, the channel + * was forced to halt because there's no way to gracefully + * recover. + */ + release_channel(_hcd, _hc, _qtd, _hc->halt_status, must_free); + return; + } + + /* Read the HCINTn register to determine the cause for the halt. */ + hcint.d32 = dwc_read_reg32(&_hc_regs->hcint); + hcintmsk.d32 = dwc_read_reg32(&_hc_regs->hcintmsk); + if (hcint.b.xfercomp) { + + /** @todo This is here because of a possible hardware bug. Spec + * says that on SPLIT-ISOC OUT transfers in DMA mode that a HALT + * interrupt w/ACK bit set should occur, but I only see the + * XFERCOMP bit, even with it masked out. This is a workaround + * for that behavior. Should fix this when hardware is fixed. + */ + if ((_hc->ep_type == DWC_OTG_EP_TYPE_ISOC) && (!_hc->ep_is_in)) { + handle_hc_ack_intr(_hcd, _hc, _hc_regs, _qtd, must_free); + } + handle_hc_xfercomp_intr(_hcd, _hc, _hc_regs, _qtd, must_free); + } else if (hcint.b.stall) { + handle_hc_stall_intr(_hcd, _hc, _hc_regs, _qtd, must_free); + } else if (hcint.b.xacterr) { + /* + * Must handle xacterr before nak or ack. Could get a xacterr + * at the same time as either of these on a BULK/CONTROL OUT + * that started with a PING. The xacterr takes precedence. + */ + handle_hc_xacterr_intr(_hcd, _hc, _hc_regs, _qtd, must_free); + } else if (hcint.b.nyet) { + /* + * Must handle nyet before nak or ack. Could get a nyet at the + * same time as either of those on a BULK/CONTROL OUT that + * started with a PING. The nyet takes precedence. + */ + handle_hc_nyet_intr(_hcd, _hc, _hc_regs, _qtd, must_free); + } else if (hcint.b.bblerr) { + handle_hc_babble_intr(_hcd, _hc, _hc_regs, _qtd, must_free); + } else if (hcint.b.frmovrun) { + handle_hc_frmovrun_intr(_hcd, _hc, _hc_regs, _qtd, must_free); + } else if (hcint.b.datatglerr) { + handle_hc_datatglerr_intr(_hcd, _hc, _hc_regs, _qtd, must_free); + } else if (hcint.b.nak && !hcintmsk.b.nak) { + /* + * If nak is not masked, it's because a non-split IN transfer + * is in an error state. In that case, the nak is handled by + * the nak interrupt handler, not here. Handle nak here for + * BULK/CONTROL OUT transfers, which halt on a NAK to allow + * rewinding the buffer pointer. + */ + handle_hc_nak_intr(_hcd, _hc, _hc_regs, _qtd, must_free); + } else if (hcint.b.ack && !hcintmsk.b.ack) { + /* + * If ack is not masked, it's because a non-split IN transfer + * is in an error state. In that case, the ack is handled by + * the ack interrupt handler, not here. Handle ack here for + * split transfers. Start splits halt on ACK. + */ + handle_hc_ack_intr(_hcd, _hc, _hc_regs, _qtd, must_free); + } else { + if (_hc->ep_type == DWC_OTG_EP_TYPE_INTR || + _hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { + /* + * A periodic transfer halted with no other channel + * interrupts set. Assume it was halted by the core + * because it could not be completed in its scheduled + * (micro)frame. + */ +#ifdef CONFIG_DWC_DEBUG + DWC_PRINT("%s: Halt channel %d (assume incomplete periodic transfer)\n", + __func__, _hc->hc_num); + +#endif /* */ + halt_channel(_hcd, _hc, _qtd, + DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE, must_free); + } else { + DWC_ERROR("%s: Channel %d, DMA Mode -- ChHltd set, but reason " + "for halting is unknown, nyet %d, hcint 0x%08x, intsts 0x%08x\n", + __func__, _hc->hc_num, hcint.b.nyet, hcint.d32, + dwc_read_reg32(&_hcd->core_if->core_global_regs->gintsts)); + } + } +} + +/** + * Handles a host channel Channel Halted interrupt. + * + * In slave mode, this handler is called only when the driver specifically + * requests a halt. This occurs during handling other host channel interrupts + * (e.g. nak, xacterr, stall, nyet, etc.). + * + * In DMA mode, this is the interrupt that occurs when the core has finished + * processing a transfer on a channel. Other host channel interrupts (except + * ahberr) are disabled in DMA mode. + */ +static int32_t handle_hc_chhltd_intr(dwc_otg_hcd_t * _hcd, + dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free) +{ + DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " + "Channel Halted--\n", _hc->hc_num); + if (_hcd->core_if->dma_enable) { + handle_hc_chhltd_intr_dma(_hcd, _hc, _hc_regs, _qtd, must_free); + } else { +#ifdef CONFIG_DWC_DEBUG + if (!halt_status_ok(_hcd, _hc, _hc_regs, _qtd)) { + return 1; + } +#endif /* */ + release_channel(_hcd, _hc, _qtd, _hc->halt_status, must_free); + } + clear_hc_int(_hc_regs, chhltd); + return 1; +} + +/** Handles interrupt for a specific Host Channel */ +int32_t dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd_t * _dwc_otg_hcd, uint32_t _num) +{ + int must_free = 0; + int retval = 0; + hcint_data_t hcint; + hcintmsk_data_t hcintmsk; + dwc_hc_t * hc; + dwc_otg_hc_regs_t * hc_regs; + dwc_otg_qtd_t * qtd; + DWC_DEBUGPL(DBG_HCDV, "--Host Channel Interrupt--, Channel %d\n",_num); + hc = _dwc_otg_hcd->hc_ptr_array[_num]; + hc_regs = _dwc_otg_hcd->core_if->host_if->hc_regs[_num]; + qtd = list_entry(hc->qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry); + hcint.d32 = dwc_read_reg32(&hc_regs->hcint); + hcintmsk.d32 = dwc_read_reg32(&hc_regs->hcintmsk); + DWC_DEBUGPL(DBG_HCDV, " hcint 0x%08x, hcintmsk 0x%08x, hcint&hcintmsk 0x%08x\n", + hcint.d32, hcintmsk.d32, (hcint.d32 & hcintmsk.d32)); + hcint.d32 = hcint.d32 & hcintmsk.d32; + if (!_dwc_otg_hcd->core_if->dma_enable) { + if ((hcint.b.chhltd) && (hcint.d32 != 0x2)) { + hcint.b.chhltd = 0; + } + } + if (hcint.b.xfercomp) { + retval |= handle_hc_xfercomp_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free); + /* + * If NYET occurred at same time as Xfer Complete, the NYET is + * handled by the Xfer Complete interrupt handler. Don't want + * to call the NYET interrupt handler in this case. + */ + hcint.b.nyet = 0; + } + if (hcint.b.chhltd) { + retval |= handle_hc_chhltd_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free); + } + if (hcint.b.ahberr) { + retval |= handle_hc_ahberr_intr(_dwc_otg_hcd, hc, hc_regs, qtd); + } + if (hcint.b.stall) { + retval |= handle_hc_stall_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free); + } + if (hcint.b.nak) { + retval |= handle_hc_nak_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free); + } + if (hcint.b.ack) { + retval |= handle_hc_ack_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free); + } + if (hcint.b.nyet) { + retval |= handle_hc_nyet_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free); + } + if (hcint.b.xacterr) { + retval |= handle_hc_xacterr_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free); + } + if (hcint.b.bblerr) { + retval |= handle_hc_babble_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free); + } + if (hcint.b.frmovrun) { + retval |= handle_hc_frmovrun_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free); + } + if (hcint.b.datatglerr) { + retval |= handle_hc_datatglerr_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free); + } + /* + * Logic to free the qtd here, at the end of the hc intr + * processing, if the handling of this interrupt determined + * that it needs to be freed. + */ + if (must_free) { + /* Free the qtd here now that we are done using it. */ + dwc_otg_hcd_qtd_free(qtd); + } + return retval; +} + +#endif /* DWC_DEVICE_ONLY */ diff --git a/drivers/usb/gadget/dwc_otg/dwc_otg_hcd_queue.c b/drivers/usb/gadget/dwc_otg/dwc_otg_hcd_queue.c index b33b32e8468..3bee609586a 100644 --- a/drivers/usb/gadget/dwc_otg/dwc_otg_hcd_queue.c +++ b/drivers/usb/gadget/dwc_otg/dwc_otg_hcd_queue.c @@ -138,6 +138,8 @@ void dwc_otg_hcd_qh_init(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh, /* FS/LS Enpoint on HS Hub * NOT virtual root hub */ _qh->do_split = 0; + _qh->speed = _urb->dev->speed; + if (((_urb->dev->speed == USB_SPEED_LOW) || (_urb->dev->speed == USB_SPEED_FULL)) && (_urb->dev->tt) && (_urb->dev->tt->hub) && (_urb->dev->tt->hub->devnum != 1)) { @@ -229,71 +231,157 @@ void dwc_otg_hcd_qh_init(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh, } /** - * Checks that a channel is available for a periodic transfer. - * - * @return 0 if successful, negative error code otherise. + * Microframe scheduler + * track the total use in hcd->frame_usecs + * keep each qh use in qh->frame_usecs + * when surrendering the qh then donate the time back + */ +const unsigned short max_uframe_usecs[]={ 100, 100, 100, 100, 100, 100, 30, 0 }; + +/* + * called from dwc_otg_hcd.c:dwc_otg_hcd_init */ -static int periodic_channel_available(dwc_otg_hcd_t * _hcd) +int init_hcd_usecs(dwc_otg_hcd_t *_hcd) { - /* - * Currently assuming that there is a dedicated host channnel for each - * periodic transaction plus at least one host channel for - * non-periodic transactions. - */ - int status; - int num_channels; - num_channels = _hcd->core_if->core_params->host_channels; - if ((_hcd->periodic_channels + _hcd->non_periodic_channels < - num_channels) && (_hcd->periodic_channels < num_channels - 1)) { - status = 0; - } else { - DWC_NOTICE("%s: Total channels: %d, Periodic: %d, Non-periodic: %d\n", - __func__, num_channels, _hcd->periodic_channels, - _hcd->non_periodic_channels); - status = -ENOSPC; + int i; + for (i=0; i<8; i++) { + _hcd->frame_usecs[i] = max_uframe_usecs[i]; } - return status; + return 0; } -/** - * Checks that there is sufficient bandwidth for the specified QH in the - * periodic schedule. For simplicity, this calculation assumes that all the - * transfers in the periodic schedule may occur in the same (micro)frame. - * - * @param _hcd The HCD state structure for the DWC OTG controller. - * @param _qh QH containing periodic bandwidth required. - * - * @return 0 if successful, negative error code otherwise. +static int find_single_uframe(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh) +{ + int i; + unsigned short utime; + int t_left; + int ret; + int done; + + ret = -1; + utime = _qh->usecs; + t_left = utime; + i = 0; + done = 0; + while (done == 0) { + /* At the start _hcd->frame_usecs[i] = max_uframe_usecs[i]; */ + if (utime <= _hcd->frame_usecs[i]) { + _hcd->frame_usecs[i] -= utime; + _qh->frame_usecs[i] += utime; + t_left -= utime; + ret = i; + done = 1; + return ret; + } else { + i++; + if (i == 8) { + done = 1; + ret = -1; + } + } + } + return ret; +} + +/* + * use this for FS apps that can span multiple uframes */ -static int check_periodic_bandwidth(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh) +static int find_multi_uframe(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh) { - int status; - uint16_t max_claimed_usecs; - status = 0; - if (_hcd->core_if->core_params->speed == DWC_SPEED_PARAM_HIGH) { - /* - * High speed mode. - * Max periodic usecs is 80% x 125 usec = 100 usec. - */ - max_claimed_usecs = 100 - _qh->usecs; - } else { + int i; + int j; + unsigned short utime; + int t_left; + int ret; + int done; + unsigned short xtime; + + ret = -1; + utime = _qh->usecs; + t_left = utime; + i = 0; + done = 0; +loop: + while (done == 0) { + if(_hcd->frame_usecs[i] <= 0) { + i++; + if (i == 8) { + done = 1; + ret = -1; + } + goto loop; + } + /* - * Full speed mode. - * Max periodic usecs is 90% x 1000 usec = 900 usec. + * we need n consequtive slots + * so use j as a start slot j plus j+1 must be enough time (for now) */ - max_claimed_usecs = 900 - _qh->usecs; + xtime= _hcd->frame_usecs[i]; + for (j = i+1 ; j < 8 ; j++ ) { + /* + * if we add this frame remaining time to xtime we may + * be OK, if not we need to test j for a complete frame + */ + if ((xtime+_hcd->frame_usecs[j]) < utime) { + if (_hcd->frame_usecs[j] < max_uframe_usecs[j]) { + j = 8; + ret = -1; + continue; + } + } + if (xtime >= utime) { + ret = i; + j = 8; /* stop loop with a good value ret */ + continue; + } + /* add the frame time to x time */ + xtime += _hcd->frame_usecs[j]; + /* we must have a fully available next frame or break */ + if ((xtime < utime) + && (_hcd->frame_usecs[j] == max_uframe_usecs[j])) { + ret = -1; + j = 8; /* stop loop with a bad value ret */ + continue; + } + } + if (ret >= 0) { + t_left = utime; + for (j = i; (t_left>0) && (j < 8); j++ ) { + t_left -= _hcd->frame_usecs[j]; + if ( t_left <= 0 ) { + _qh->frame_usecs[j] += _hcd->frame_usecs[j] + t_left; + _hcd->frame_usecs[j]= -t_left; + ret = i; + done = 1; + } else { + _qh->frame_usecs[j] += _hcd->frame_usecs[j]; + _hcd->frame_usecs[j] = 0; + } + } + } else { + i++; + if (i == 8) { + done = 1; + ret = -1; + } + } } - if (_hcd->periodic_usecs > max_claimed_usecs) { -#undef USB_DWC_OTG_IGNORE_BANDWIDTH -#ifndef USB_DWC_OTG_IGNORE_BANDWIDTH - DWC_NOTICE("%s: already claimed usecs %d, required usecs %d\n", - __func__, _hcd->periodic_usecs, _qh->usecs); - status = -ENOSPC; -#else - status = 0; -#endif + return ret; +} + +static int find_uframe(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh) +{ + int ret; + ret = -1; + + if (_qh->speed == USB_SPEED_HIGH) { + /* if this is a hs transaction we need a full frame */ + ret = find_single_uframe(_hcd, _qh); + } else { + /* if this is a fs transaction we may need a sequence of frames */ + ret = find_multi_uframe(_hcd, _qh); } - return status; + return ret; } /** @@ -335,13 +423,24 @@ static int check_max_xfer_size(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh) static int schedule_periodic(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh) { int status = 0; - status = periodic_channel_available(_hcd); - if (status) { - DWC_NOTICE("%s: No host channel available for periodic " - "transfer.\n", __func__); - return status; + int frame; + status = find_uframe(_hcd, _qh); + frame = -1; + if (status == 0) { + frame = 7; + } else { + if (status > 0 ) + frame = status-1; + } + /* Set the new frame up */ + if (frame > -1) { + _qh->sched_frame &= ~0x7; + _qh->sched_frame |= (frame & 7); } - status = check_periodic_bandwidth(_hcd, _qh); + + if (status != -1 ) + status = 0; + if (status) { DWC_NOTICE("%s: Insufficient periodic bandwidth for " "periodic transfer.\n", __func__); @@ -357,9 +456,6 @@ static int schedule_periodic(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh) /* Always start in the inactive schedule. */ list_add_tail(&_qh->qh_list_entry, &_hcd->periodic_sched_inactive); - /* Reserve the periodic channel. */ - _hcd->periodic_channels++; - /* Update claimed usecs per (micro)frame. */ _hcd->periodic_usecs += _qh->usecs; @@ -442,14 +538,17 @@ done: */ static void deschedule_periodic(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh) { + int i; list_del_init(&_qh->qh_list_entry); - /* Release the periodic channel reservation. */ - _hcd->periodic_channels--; - /* Update claimed usecs per (micro)frame. */ _hcd->periodic_usecs -= _qh->usecs; + for (i = 0; i < 8; i++) { + _hcd->frame_usecs[i] += _qh->frame_usecs[i]; + _qh->frame_usecs[i] = 0; + } + /* Update average periodic bandwidth claimed and # periodic reqs for usbfs. */ hcd_to_bus(dwc_otg_hcd_to_hcd(_hcd))->bandwidth_allocated -= _qh->usecs / _qh->interval; @@ -587,7 +686,7 @@ void dwc_otg_hcd_qh_deactivate(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh, * Remove from periodic_sched_queued and move to * appropriate queue. */ - if (_qh->sched_frame == frame_number) { + if (dwc_frame_num_le(_qh->sched_frame, frame_number)) { list_move(&_qh->qh_list_entry, &_hcd->periodic_sched_ready); } else { diff --git a/drivers/usb/gadget/dwc_otg/dwc_otg_hcd_queue.c.org b/drivers/usb/gadget/dwc_otg/dwc_otg_hcd_queue.c.org new file mode 100644 index 00000000000..b33b32e8468 --- /dev/null +++ b/drivers/usb/gadget/dwc_otg/dwc_otg_hcd_queue.c.org @@ -0,0 +1,696 @@ +/* ========================================================================== + * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_hcd_queue.c $ + * $Revision: #4 $ + * $Date: 2005/09/15 $ + * $Change: 537387 $ + * + * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, + * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless + * otherwise expressly agreed to in writing between Synopsys and you. + * + * The Software IS NOT an item of Licensed Software or Licensed Product under + * any End User Software License Agreement or Agreement for Licensed Product + * with Synopsys or any supplement thereto. You are permitted to use and + * redistribute this Software in source and binary forms, with or without + * modification, provided that redistributions of source code must retain this + * notice. You may not view, use, disclose, copy or distribute this file or + * any information contained herein except pursuant to this license grant from + * Synopsys. If you do not agree with this notice, including the disclaimer + * below, then you are not authorized to use the Software. + * + * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * ========================================================================== */ + +#ifndef CONFIG_DWC_DEVICE_ONLY + +/** + * @file + * + * This file contains the functions to manage Queue Heads and Queue + * Transfer Descriptors. + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/string.h> + +#include "dwc_otg_driver.h" +#include "dwc_otg_hcd.h" +#include "dwc_otg_regs.h" + +/** + * This function allocates and initializes a QH. + * + * @param _hcd The HCD state structure for the DWC OTG controller. + * @param[in] _urb Holds the information about the device/endpoint that we need + * to initialize the QH. + * + * @return Returns pointer to the newly allocated QH, or NULL on error. */ +dwc_otg_qh_t * dwc_otg_hcd_qh_create(dwc_otg_hcd_t * _hcd, + struct urb * _urb) +{ + dwc_otg_qh_t * qh; + + /* Allocate memory */ + /** @todo add memflags argument */ + qh = dwc_otg_hcd_qh_alloc(); + if (qh == NULL) { + return NULL; + } + dwc_otg_hcd_qh_init(_hcd, qh, _urb); + return qh; +} + +/** Free each QTD in the QH's QTD-list then free the QH. QH should already be + * removed from a list. QTD list should already be empty if called from URB + * Dequeue. + * + * @param[in] _qh The QH to free. + */ +void dwc_otg_hcd_qh_free(dwc_otg_qh_t * _qh) +{ + dwc_otg_qtd_t * qtd; + struct list_head *pos; + unsigned long flags; + + /* Free each QTD in the QTD list */ + local_irq_save(flags); + for (pos = _qh->qtd_list.next; pos != &_qh->qtd_list; + pos = _qh->qtd_list.next) { + list_del(pos); + qtd = dwc_list_to_qtd(pos); + dwc_otg_hcd_qtd_free(qtd); + } + local_irq_restore(flags); + kfree(_qh); + return; +} + +/** Initializes a QH structure. + * + * @param[in] _hcd The HCD state structure for the DWC OTG controller. + * @param[in] _qh The QH to init. + * @param[in] _urb Holds the information about the device/endpoint that we need + * to initialize the QH. */ +#define SCHEDULE_SLOP 10 +void dwc_otg_hcd_qh_init(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh, + struct urb *_urb) +{ + memset(_qh, 0, sizeof(dwc_otg_qh_t)); + + /* Initialize QH */ + switch (usb_pipetype(_urb->pipe)) { + case PIPE_CONTROL: + _qh->ep_type = USB_ENDPOINT_XFER_CONTROL; + break; + case PIPE_BULK: + _qh->ep_type = USB_ENDPOINT_XFER_BULK; + break; + case PIPE_ISOCHRONOUS: + _qh->ep_type = USB_ENDPOINT_XFER_ISOC; + break; + case PIPE_INTERRUPT: + _qh->ep_type = USB_ENDPOINT_XFER_INT; + break; + } + _qh->ep_is_in = usb_pipein(_urb->pipe) ? 1 : 0; + _qh->data_toggle = DWC_OTG_HC_PID_DATA0; + _qh->maxp = usb_maxpacket(_urb->dev, _urb->pipe, !(usb_pipein(_urb->pipe))); + INIT_LIST_HEAD(&_qh->qtd_list); + INIT_LIST_HEAD(&_qh->qh_list_entry); + _qh->channel = NULL; + + /* FS/LS Enpoint on HS Hub + * NOT virtual root hub */ + _qh->do_split = 0; + if (((_urb->dev->speed == USB_SPEED_LOW) || + (_urb->dev->speed == USB_SPEED_FULL)) && + (_urb->dev->tt) && (_urb->dev->tt->hub) && (_urb->dev->tt->hub->devnum != 1)) { + DWC_DEBUGPL(DBG_HCD, "QH init: EP %d: TT found at hub addr %d, for port %d\n", + usb_pipeendpoint(_urb->pipe), _urb->dev->tt->hub->devnum, _urb->dev->ttport); + _qh->do_split = 1; + } + if (_qh->ep_type == USB_ENDPOINT_XFER_INT + || _qh->ep_type == USB_ENDPOINT_XFER_ISOC) { + + /* Compute scheduling parameters once and save them. */ + hprt0_data_t hprt; + + /** @todo Account for split transfers in the bus time. */ + int bytecount = dwc_hb_mult(_qh->maxp) * dwc_max_packet(_qh->maxp); + _qh->usecs = NS_TO_US(usb_calc_bus_time(_urb->dev->speed, + usb_pipein(_urb->pipe), + (_qh->ep_type == USB_ENDPOINT_XFER_ISOC),bytecount)); + + /* Start in a slightly future (micro)frame. */ + _qh->sched_frame = dwc_frame_num_inc(_hcd->frame_number, SCHEDULE_SLOP); + _qh->interval = _urb->interval; + +#if 0 + /* Increase interrupt polling rate for debugging. */ + if (_qh->ep_type == USB_ENDPOINT_XFER_INT) { + _qh->interval = 8; + } + +#endif /* */ + hprt.d32 = dwc_read_reg32(_hcd->core_if->host_if->hprt0); + if ((hprt.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED) && + ((_urb->dev->speed == USB_SPEED_LOW) || + (_urb->dev->speed == USB_SPEED_FULL))) { + _qh->interval *= 8; + _qh->sched_frame |= 0x7; + _qh->start_split_frame = _qh->sched_frame; + } + } + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD QH Initialized\n"); + DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - qh = %p\n", _qh); + DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Device Address = %d\n", + _urb->dev->devnum); + DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Endpoint %d, %s\n", + usb_pipeendpoint(_urb->pipe), + usb_pipein(_urb->pipe) == USB_DIR_IN ? "IN" : "OUT"); + DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Speed = %s\n", ( { + char *speed; + switch(_urb->dev->speed) { + case USB_SPEED_LOW: + speed = "low"; break; + case USB_SPEED_FULL: + speed = "full"; break; + case USB_SPEED_HIGH: + speed = "high"; break; + default: + speed = "?"; + break; + }; + speed; + } )) ; + DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Type = %s\n", ( { + char *type; + switch (_qh->ep_type) { + case USB_ENDPOINT_XFER_ISOC: + type = "isochronous"; break; + case USB_ENDPOINT_XFER_INT: + type = "interrupt"; break; + case USB_ENDPOINT_XFER_CONTROL: + type = "control"; break; + case USB_ENDPOINT_XFER_BULK: + type = "bulk"; break; + default: + type = "?";break; + }; + type; + } )) ; + +#ifdef CONFIG_DWC_DEBUG + if (_qh->ep_type == USB_ENDPOINT_XFER_INT) { + DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - usecs = %d\n", + _qh->usecs); + DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - interval = %d\n", + _qh->interval); + } + +#endif /* */ + return; +} + +/** + * Checks that a channel is available for a periodic transfer. + * + * @return 0 if successful, negative error code otherise. + */ +static int periodic_channel_available(dwc_otg_hcd_t * _hcd) +{ + /* + * Currently assuming that there is a dedicated host channnel for each + * periodic transaction plus at least one host channel for + * non-periodic transactions. + */ + int status; + int num_channels; + num_channels = _hcd->core_if->core_params->host_channels; + if ((_hcd->periodic_channels + _hcd->non_periodic_channels < + num_channels) && (_hcd->periodic_channels < num_channels - 1)) { + status = 0; + } else { + DWC_NOTICE("%s: Total channels: %d, Periodic: %d, Non-periodic: %d\n", + __func__, num_channels, _hcd->periodic_channels, + _hcd->non_periodic_channels); + status = -ENOSPC; + } + return status; +} + +/** + * Checks that there is sufficient bandwidth for the specified QH in the + * periodic schedule. For simplicity, this calculation assumes that all the + * transfers in the periodic schedule may occur in the same (micro)frame. + * + * @param _hcd The HCD state structure for the DWC OTG controller. + * @param _qh QH containing periodic bandwidth required. + * + * @return 0 if successful, negative error code otherwise. + */ +static int check_periodic_bandwidth(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh) +{ + int status; + uint16_t max_claimed_usecs; + status = 0; + if (_hcd->core_if->core_params->speed == DWC_SPEED_PARAM_HIGH) { + /* + * High speed mode. + * Max periodic usecs is 80% x 125 usec = 100 usec. + */ + max_claimed_usecs = 100 - _qh->usecs; + } else { + /* + * Full speed mode. + * Max periodic usecs is 90% x 1000 usec = 900 usec. + */ + max_claimed_usecs = 900 - _qh->usecs; + } + if (_hcd->periodic_usecs > max_claimed_usecs) { +#undef USB_DWC_OTG_IGNORE_BANDWIDTH +#ifndef USB_DWC_OTG_IGNORE_BANDWIDTH + DWC_NOTICE("%s: already claimed usecs %d, required usecs %d\n", + __func__, _hcd->periodic_usecs, _qh->usecs); + status = -ENOSPC; +#else + status = 0; +#endif + } + return status; +} + +/** + * Checks that the max transfer size allowed in a host channel is large enough + * to handle the maximum data transfer in a single (micro)frame for a periodic + * transfer. + * + * @param _hcd The HCD state structure for the DWC OTG controller. + * @param _qh QH for a periodic endpoint. + * + * @return 0 if successful, negative error code otherwise. + */ +static int check_max_xfer_size(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh) +{ + int status; + uint32_t max_xfer_size; + uint32_t max_channel_xfer_size; + status = 0; + max_xfer_size = dwc_max_packet(_qh->maxp) * dwc_hb_mult(_qh->maxp); + max_channel_xfer_size = _hcd->core_if->core_params->max_transfer_size; + if (max_xfer_size > max_channel_xfer_size) { + DWC_NOTICE("%s: Periodic xfer length %d > " + "max xfer length for channel %d\n", __func__, + max_xfer_size, max_channel_xfer_size); + status = -ENOSPC; + } + return status; +} + +/** + * Schedules an interrupt or isochronous transfer in the periodic schedule. + * + * @param _hcd The HCD state structure for the DWC OTG controller. + * @param _qh QH for the periodic transfer. The QH should already contain the + * scheduling information. + * + * @return 0 if successful, negative error code otherwise. + */ +static int schedule_periodic(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh) +{ + int status = 0; + status = periodic_channel_available(_hcd); + if (status) { + DWC_NOTICE("%s: No host channel available for periodic " + "transfer.\n", __func__); + return status; + } + status = check_periodic_bandwidth(_hcd, _qh); + if (status) { + DWC_NOTICE("%s: Insufficient periodic bandwidth for " + "periodic transfer.\n", __func__); + return status; + } + status = check_max_xfer_size(_hcd, _qh); + if (status) { + DWC_NOTICE("%s: Channel max transfer size too small " + "for periodic transfer.\n", __func__); + return status; + } + + /* Always start in the inactive schedule. */ + list_add_tail(&_qh->qh_list_entry, &_hcd->periodic_sched_inactive); + + /* Reserve the periodic channel. */ + _hcd->periodic_channels++; + + /* Update claimed usecs per (micro)frame. */ + _hcd->periodic_usecs += _qh->usecs; + + /* Update average periodic bandwidth claimed and # periodic reqs for usbfs. */ + hcd_to_bus(dwc_otg_hcd_to_hcd(_hcd))->bandwidth_allocated += + _qh->usecs / _qh->interval; + + if (_qh->ep_type == USB_ENDPOINT_XFER_INT) { + hcd_to_bus(dwc_otg_hcd_to_hcd(_hcd))->bandwidth_int_reqs++; + DWC_DEBUGPL(DBG_HCD, + "Scheduled intr: qh %p, usecs %d, period %d\n", + _qh, _qh->usecs, _qh->interval); + } else { + hcd_to_bus(dwc_otg_hcd_to_hcd(_hcd))->bandwidth_isoc_reqs++; + DWC_DEBUGPL(DBG_HCD, + "Scheduled isoc: qh %p, usecs %d, period %d\n", + _qh, _qh->usecs, _qh->interval); + } + return status; +} + +/** + * This function adds a QH to either the non periodic or periodic schedule if + * it is not already in the schedule. If the QH is already in the schedule, no + * action is taken. + * + * @return 0 if successful, negative error code otherwise. + */ +int dwc_otg_hcd_qh_add(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh) +{ + unsigned long flags; + int status = 0; + local_irq_save(flags); + if (!list_empty(&_qh->qh_list_entry)) { + /* QH already in a schedule. */ + goto done; + } + + /* Add the new QH to the appropriate schedule */ + if (dwc_qh_is_non_per(_qh)) { + /* Always start in the inactive schedule. */ + list_add_tail(&_qh->qh_list_entry, + &_hcd->non_periodic_sched_inactive); + } else { + status = schedule_periodic(_hcd, _qh); + } + +done:local_irq_restore(flags); + return status; +} +/** + * This function adds a QH to the non periodic deferred schedule. + * + * @return 0 if successful, negative error code otherwise. + */ +int dwc_otg_hcd_qh_add_deferred(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh) +{ + unsigned long flags; + local_irq_save(flags); + if (!list_empty(&_qh->qh_list_entry)) { + /* QH already in a schedule. */ + goto done; + } + + /* Add the new QH to the non periodic deferred schedule */ + if (dwc_qh_is_non_per(_qh)) { + list_add_tail(&_qh->qh_list_entry, + &_hcd->non_periodic_sched_deferred); + } +done: + local_irq_restore(flags); + return 0; +} + +/** + * Removes an interrupt or isochronous transfer from the periodic schedule. + * + * @param _hcd The HCD state structure for the DWC OTG controller. + * @param _qh QH for the periodic transfer. + */ +static void deschedule_periodic(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh) +{ + list_del_init(&_qh->qh_list_entry); + + /* Release the periodic channel reservation. */ + _hcd->periodic_channels--; + + /* Update claimed usecs per (micro)frame. */ + _hcd->periodic_usecs -= _qh->usecs; + + /* Update average periodic bandwidth claimed and # periodic reqs for usbfs. */ + hcd_to_bus(dwc_otg_hcd_to_hcd(_hcd))->bandwidth_allocated -= + _qh->usecs / _qh->interval; + + if (_qh->ep_type == USB_ENDPOINT_XFER_INT) { + hcd_to_bus(dwc_otg_hcd_to_hcd(_hcd))->bandwidth_int_reqs--; + DWC_DEBUGPL(DBG_HCD, + "Descheduled intr: qh %p, usecs %d, period %d\n", + _qh, _qh->usecs, _qh->interval); + } else { + hcd_to_bus(dwc_otg_hcd_to_hcd(_hcd))->bandwidth_isoc_reqs--; + DWC_DEBUGPL(DBG_HCD, + "Descheduled isoc: qh %p, usecs %d, period %d\n", + _qh, _qh->usecs, _qh->interval); + } +} + +/** + * Removes a QH from either the non-periodic or periodic schedule. Memory is + * not freed. + * + * @param[in] _hcd The HCD state structure. + * @param[in] _qh QH to remove from schedule. */ +void dwc_otg_hcd_qh_remove(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh) +{ + unsigned long flags; + local_irq_save(flags); + if (list_empty(&_qh->qh_list_entry)) { + /* QH is not in a schedule. */ + goto done; + } + if (dwc_qh_is_non_per(_qh)) { + if (_hcd->non_periodic_qh_ptr == &_qh->qh_list_entry) { + _hcd->non_periodic_qh_ptr = _hcd->non_periodic_qh_ptr->next; + } + list_del_init(&_qh->qh_list_entry); + } else { + deschedule_periodic(_hcd, _qh); + } + +done:local_irq_restore(flags); +} + +/** + * Defers a QH. For non-periodic QHs, removes the QH from the active + * non-periodic schedule. The QH is added to the deferred non-periodic + * schedule if any QTDs are still attached to the QH. + */ +int dwc_otg_hcd_qh_deferr(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh, int delay) +{ + int deact = 1; + unsigned long flags; + local_irq_save(flags); + if (dwc_qh_is_non_per(_qh)) { + _qh->sched_frame = + dwc_frame_num_inc(_hcd->frame_number, + delay); + _qh->channel = NULL; + _qh->qtd_in_process = NULL; + deact = 0; + dwc_otg_hcd_qh_remove(_hcd, _qh); + if (!list_empty(&_qh->qtd_list)) { + /* Add back to deferred non-periodic schedule. */ + dwc_otg_hcd_qh_add_deferred(_hcd, _qh); + } + } + local_irq_restore(flags); + return deact; +} +/** + * Deactivates a QH. For non-periodic QHs, removes the QH from the active + * non-periodic schedule. The QH is added to the inactive non-periodic + * schedule if any QTDs are still attached to the QH. + * + * For periodic QHs, the QH is removed from the periodic queued schedule. If + * there are any QTDs still attached to the QH, the QH is added to either the + * periodic inactive schedule or the periodic ready schedule and its next + * scheduled frame is calculated. The QH is placed in the ready schedule if + * the scheduled frame has been reached already. Otherwise it's placed in the + * inactive schedule. If there are no QTDs attached to the QH, the QH is + * completely removed from the periodic schedule. + */ +void dwc_otg_hcd_qh_deactivate(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh, + int sched_next_periodic_split) +{ + unsigned long flags; + local_irq_save(flags); + if (dwc_qh_is_non_per(_qh)) { + dwc_otg_hcd_qh_remove(_hcd, _qh); + if (!list_empty(&_qh->qtd_list)) { + /* Add back to inactive non-periodic schedule. */ + dwc_otg_hcd_qh_add(_hcd, _qh); + } + } else { + uint16_t frame_number = + dwc_otg_hcd_get_frame_number(dwc_otg_hcd_to_hcd(_hcd)); + if (_qh->do_split) { + /* Schedule the next continuing periodic split transfer */ + if (sched_next_periodic_split) { + _qh->sched_frame = frame_number; + if (dwc_frame_num_le(frame_number, + dwc_frame_num_inc(_qh->start_split_frame,1))) { + /* + * Allow one frame to elapse after start + * split microframe before scheduling + * complete split, but DONT if we are + * doing the next start split in the + * same frame for an ISOC out. + */ + if ((_qh->ep_type != USB_ENDPOINT_XFER_ISOC) + || (_qh->ep_is_in != 0)) { + _qh->sched_frame = dwc_frame_num_inc(_qh->sched_frame,1); + } + } + } else { + _qh->sched_frame = dwc_frame_num_inc(_qh->start_split_frame, + _qh->interval); + if (dwc_frame_num_le(_qh->sched_frame, frame_number)) { + _qh->sched_frame = frame_number; + } + _qh->sched_frame |= 0x7; + _qh->start_split_frame = _qh->sched_frame; + } + } else { + _qh->sched_frame = + dwc_frame_num_inc(_qh->sched_frame, _qh->interval); + if (dwc_frame_num_le(_qh->sched_frame, frame_number)) { + _qh->sched_frame = frame_number; + } + } + if (list_empty(&_qh->qtd_list)) { + dwc_otg_hcd_qh_remove(_hcd, _qh); + } else { + /* + * Remove from periodic_sched_queued and move to + * appropriate queue. + */ + if (_qh->sched_frame == frame_number) { + list_move(&_qh->qh_list_entry, + &_hcd->periodic_sched_ready); + } else { + list_move(&_qh->qh_list_entry, + &_hcd->periodic_sched_inactive); + } + } + } + local_irq_restore(flags); +} + +/** + * This function allocates and initializes a QTD. + * + * @param[in] _urb The URB to create a QTD from. Each URB-QTD pair will end up + * pointing to each other so each pair should have a unique correlation. + * + * @return Returns pointer to the newly allocated QTD, or NULL on error. */ +dwc_otg_qtd_t * dwc_otg_hcd_qtd_create(struct urb *_urb) +{ + dwc_otg_qtd_t * qtd; + qtd = dwc_otg_hcd_qtd_alloc(); + if (qtd == NULL) { + return NULL; + } + dwc_otg_hcd_qtd_init(qtd, _urb); + return qtd; +} + +/** + * Initializes a QTD structure. + * + * @param[in] _qtd The QTD to initialize. + * @param[in] _urb The URB to use for initialization. */ +void dwc_otg_hcd_qtd_init(dwc_otg_qtd_t * _qtd, struct urb *_urb) +{ + memset(_qtd, 0, sizeof(dwc_otg_qtd_t)); + _qtd->urb = _urb; + if (usb_pipecontrol(_urb->pipe)) { + /* + * The only time the QTD data toggle is used is on the data + * phase of control transfers. This phase always starts with + * DATA1. + */ + _qtd->data_toggle = DWC_OTG_HC_PID_DATA1; + _qtd->control_phase = DWC_OTG_CONTROL_SETUP; + } + + /* start split */ + _qtd->complete_split = 0; + _qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_ALL; + _qtd->isoc_split_offset = 0; + + /* Store the qtd ptr in the urb to reference what QTD. */ + _urb->hcpriv = _qtd; + return; +} + +/** + * This function adds a QTD to the QTD-list of a QH. It will find the correct + * QH to place the QTD into. If it does not find a QH, then it will create a + * new QH. If the QH to which the QTD is added is not currently scheduled, it + * is placed into the proper schedule based on its EP type. + * + * @param[in] _qtd The QTD to add + * @param[in] _dwc_otg_hcd The DWC HCD structure + * + * @return 0 if successful, negative error code otherwise. + */ +int dwc_otg_hcd_qtd_add(dwc_otg_qtd_t * _qtd, dwc_otg_hcd_t * _dwc_otg_hcd) +{ + struct usb_host_endpoint *ep; + dwc_otg_qh_t * qh; + unsigned long flags; + int retval = 0; + struct urb *urb = _qtd->urb; + local_irq_save(flags); + + /* + * Get the QH which holds the QTD-list to insert to. Create QH if it + * doesn't exist. + */ + ep = dwc_urb_to_endpoint(urb); + qh = (dwc_otg_qh_t *) ep->hcpriv; + if (qh == NULL) { + qh = dwc_otg_hcd_qh_create(_dwc_otg_hcd, urb); + if (qh == NULL) { + retval = -1; + goto done; + } + ep->hcpriv = qh; + } + _qtd->qtd_qh_ptr = qh; + retval = dwc_otg_hcd_qh_add(_dwc_otg_hcd, qh); + if (retval == 0) { + list_add_tail(&_qtd->qtd_list_entry, &qh->qtd_list); + } + +done: + local_irq_restore(flags); + + return retval; +} + + +#endif /* DWC_DEVICE_ONLY */ diff --git a/drivers/usb/gadget/dwc_otg/dwc_otg_pcd.c b/drivers/usb/gadget/dwc_otg/dwc_otg_pcd.c index 4bd17de7939..ba4435385e5 100644 --- a/drivers/usb/gadget/dwc_otg/dwc_otg_pcd.c +++ b/drivers/usb/gadget/dwc_otg/dwc_otg_pcd.c @@ -1331,6 +1331,9 @@ void dwc_otg_pcd_remove(struct device *_dev) int usb_gadget_register_driver(struct usb_gadget_driver *_driver) { int retval; + dctl_data_t dctl; + uint32_t *addr = NULL; + DWC_DEBUGPL(DBG_PCD, "registering gadget driver '%s'\n", _driver->driver.name); if (!_driver || _driver->speed == USB_SPEED_UNKNOWN || !_driver->bind @@ -1376,6 +1379,16 @@ int usb_gadget_register_driver(struct usb_gadget_driver *_driver) } DWC_DEBUGPL(DBG_ANY, "registered gadget driver '%s'\n", _driver->driver.name); + + /* do soft-disconnect */ + addr = (uint32_t *)&(GET_CORE_IF(s_pcd)->dev_if->dev_global_regs->dctl); + dctl.d32 = dwc_read_reg32(addr); + dctl.b.sftdiscon = 1; + dwc_write_reg32(addr, dctl.d32); + msleep(2000); + dctl.b.sftdiscon = 0; + dwc_write_reg32(addr, dctl.d32); + return 0; } EXPORT_SYMBOL(usb_gadget_register_driver); diff --git a/drivers/usb/gadget/dwc_otg/dwc_otg_pcd.c.org b/drivers/usb/gadget/dwc_otg/dwc_otg_pcd.c.org new file mode 100644 index 00000000000..4bd17de7939 --- /dev/null +++ b/drivers/usb/gadget/dwc_otg/dwc_otg_pcd.c.org @@ -0,0 +1,1408 @@ + /* ========================================================================== + * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_pcd.c $ + * $Revision: #18 $ + * $Date: 2007/02/07 $ + * $Change: 791271 $ + * + * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, + * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless + * otherwise expressly agreed to in writing between Synopsys and you. + * + * The Software IS NOT an item of Licensed Software or Licensed Product under + * any End User Software License Agreement or Agreement for Licensed Product + * with Synopsys or any supplement thereto. You are permitted to use and + * redistribute this Software in source and binary forms, with or without + * modification, provided that redistributions of source code must retain this + * notice. You may not view, use, disclose, copy or distribute this file or + * any information contained herein except pursuant to this license grant from + * Synopsys. If you do not agree with this notice, including the disclaimer + * below, then you are not authorized to use the Software. + * + * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * ========================================================================== */ + +#ifndef CONFIG_DWC_HOST_ONLY + +/** @file + * This file implements the Peripheral Controller Driver. + * + * The Peripheral Controller Driver (PCD) is responsible for + * translating requests from the Function Driver into the appropriate + * actions on the DWC_otg controller. It isolates the Function Driver + * from the specifics of the controller by providing an API to the + * Function Driver. + * + * The Peripheral Controller Driver for Linux will implement the + * Gadget API, so that the existing Gadget drivers can be used. + * (Gadget Driver is the Linux terminology for a Function Driver.) + * + * The Linux Gadget API is defined in the header file + * <code><linux/usb/gadget.h></code>. The USB EP operations API is + * defined in the structure <code>usb_ep_ops</code> and the USB + * Controller API is defined in the structure + * <code>usb_gadget_ops</code>. + * + * An important function of the PCD is managing interrupts generated + * by the DWC_otg controller. The implementation of the DWC_otg device + * mode interrupt service routines is in dwc_otg_pcd_intr.c. + * + * @todo Add Device Mode test modes (Test J mode, Test K mode, etc). + * @todo Does it work when the request size is greater than DEPTSIZ + * transfer size + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/string.h> +#include <linux/dma-mapping.h> + +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> + +#include "dwc_otg_driver.h" +#include "dwc_otg_pcd.h" + +/** + * Static PCD pointer for use in usb_gadget_register_driver and + * usb_gadget_unregister_driver. Initialized in dwc_otg_pcd_init. + */ +static dwc_otg_pcd_t *s_pcd = 0; + +/* Display the contents of the buffer */ +extern void dump_msg(const u8 * buf, unsigned int length); + +/** + * This function completes a request. It call's the request call back. + */ +void request_done(dwc_otg_pcd_ep_t * _ep, dwc_otg_pcd_request_t * _req, + int _status) +{ + unsigned stopped = _ep->stopped; + DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, _ep); + if (_req->mapped) { + dma_unmap_single(_ep->pcd->gadget.dev.parent, + _req->req.dma, _req->req.length, + _ep->dwc_ep.is_in + ? DMA_TO_DEVICE + : DMA_FROM_DEVICE); + _req->req.dma = DMA_ADDR_INVALID; + _req->mapped = 0; + } else + dma_sync_single_for_cpu(_ep->pcd->gadget.dev.parent, + _req->req.dma, _req->req.length, + _ep->dwc_ep.is_in + ? DMA_TO_DEVICE + : DMA_FROM_DEVICE); + + list_del_init(&_req->queue); + if (_req->req.status == -EINPROGRESS) { + _req->req.status = _status; + } else { + _status = _req->req.status; + } + + /* don't modify queue heads during completion callback */ + _ep->stopped = 1; + SPIN_UNLOCK(&_ep->pcd->lock); + _req->req.complete(&_ep->ep, &_req->req); + SPIN_LOCK(&_ep->pcd->lock); + if (_ep->pcd->request_pending > 0) { + --_ep->pcd->request_pending; + } + _ep->stopped = stopped; + +#ifdef CONFIG_405EZ + /* + * Added-sr: 2007-07-26 + * + * Finally, when the current request is done, mark this endpoint + * as not active, so that new requests can be processed. + */ + _ep->dwc_ep.active = 0; +#endif +} + +/** + * This function terminates all the requsts in the EP request queue. + */ +void request_nuke(dwc_otg_pcd_ep_t * _ep) +{ + dwc_otg_pcd_request_t * req; + _ep->stopped = 1; + /* called with irqs blocked?? */ + while (!list_empty(&_ep->queue)) { + req = list_entry(_ep->queue.next, dwc_otg_pcd_request_t, queue); + request_done(_ep, req, -ESHUTDOWN); + } +} + +/* USB Endpoint Operations */ +/* + * The following sections briefly describe the behavior of the Gadget + * API endpoint operations implemented in the DWC_otg driver + * software. Detailed descriptions of the generic behavior of each of + * these functions can be found in the Linux header file + * include/linux/usb_gadget.h. + * + * The Gadget API provides wrapper functions for each of the function + * pointers defined in usb_ep_ops. The Gadget Driver calls the wrapper + * function, which then calls the underlying PCD function. The + * following sections are named according to the wrapper + * functions. Within each section, the corresponding DWC_otg PCD + * function name is specified. + * + */ + +/** + * This function assigns periodic Tx FIFO to an periodic EP + * in shared Tx FIFO mode + */ +static uint32_t assign_perio_tx_fifo(dwc_otg_core_if_t * core_if) +{ + uint32_t PerTxMsk = 1; + int i; + for (i = 0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; ++i) { + if ((PerTxMsk & core_if->p_tx_msk) == 0) { + core_if->p_tx_msk |= PerTxMsk; + return i + 1; + } + PerTxMsk <<= 1; + } + return 0; +} + +/** + * This function releases periodic Tx FIFO + * in shared Tx FIFO mode + */ +static void release_perio_tx_fifo(dwc_otg_core_if_t * core_if, + uint32_t fifo_num) +{ + core_if->p_tx_msk = (core_if->p_tx_msk & (1 << (fifo_num - 1))) ^ core_if->p_tx_msk; +} + +/** + * This function assigns periodic Tx FIFO to an periodic EP + * in shared Tx FIFO mode + */ +static uint32_t assign_tx_fifo(dwc_otg_core_if_t * core_if) +{ + uint32_t TxMsk = 1; + int i; + for (i = 0; i < core_if->hwcfg4.b.num_in_eps; ++i) { + if ((TxMsk & core_if->tx_msk) == 0) { + core_if->tx_msk |= TxMsk; + return i + 1; + } + TxMsk <<= 1; + } + return 0; +} + +/** + * This function releases periodic Tx FIFO + * in shared Tx FIFO mode + */ +static void release_tx_fifo(dwc_otg_core_if_t * core_if, uint32_t fifo_num) +{ + core_if->tx_msk = (core_if->tx_msk & (1 << (fifo_num - 1))) ^ core_if->tx_msk; +} + +/** + * This function is called by the Gadget Driver for each EP to be + * configured for the current configuration (SET_CONFIGURATION). + * + * This function initializes the dwc_otg_ep_t data structure, and then + * calls dwc_otg_ep_activate. + */ +static int dwc_otg_pcd_ep_enable(struct usb_ep *_ep, + const struct usb_endpoint_descriptor *_desc) +{ + dwc_otg_pcd_ep_t * ep = 0; + dwc_otg_pcd_t * pcd = 0; + unsigned long flags; + DWC_DEBUGPL(DBG_PCDV, "%s(%p,%p)\n", __func__, _ep, _desc); + ep = container_of(_ep, dwc_otg_pcd_ep_t, ep); + if (!_ep || !_desc || ep->desc + || _desc->bDescriptorType != USB_DT_ENDPOINT) { + DWC_WARN("%s, bad ep or descriptor\n", __func__); + return -EINVAL; + } + if (ep == &ep->pcd->ep0) { + DWC_WARN("%s, bad ep(0)\n", __func__); + return -EINVAL; + } + + /* Check FIFO size? */ + if (!_desc->wMaxPacketSize) { + DWC_WARN("%s, bad %s maxpacket\n", __func__, _ep->name); + return -ERANGE; + } + pcd = ep->pcd; + if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) { + DWC_WARN("%s, bogus device state\n", __func__); + return -ESHUTDOWN; + } + SPIN_LOCK_IRQSAVE(&pcd->lock, flags); + ep->desc = _desc; + ep->ep.maxpacket = le16_to_cpu(_desc->wMaxPacketSize); + + /* + * Activate the EP + */ + ep->stopped = 0; + ep->dwc_ep.is_in = (USB_DIR_IN & _desc->bEndpointAddress) != 0; + ep->dwc_ep.maxpacket = ep->ep.maxpacket; + ep->dwc_ep.type = _desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; + if (ep->dwc_ep.is_in) { + if (!pcd->otg_dev->core_if->en_multiple_tx_fifo) { + ep->dwc_ep.tx_fifo_num = 0; + if ((_desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_ISOC) { + /* + * if ISOC EP then assign a Periodic Tx FIFO. + */ + ep->dwc_ep.tx_fifo_num = assign_perio_tx_fifo(pcd->otg_dev->core_if); + } + } else { + /* + * if Dedicated FIFOs mode is on then assign a Tx FIFO. + */ + ep->dwc_ep.tx_fifo_num = assign_tx_fifo(pcd->otg_dev->core_if); + } + } + + /* Set initial data PID. */ + if ((_desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_BULK) { + ep->dwc_ep.data_pid_start = 0; + } + DWC_DEBUGPL(DBG_PCD, "Activate %s-%s: type=%d, mps=%d desc=%p\n", + ep->ep.name, (ep->dwc_ep.is_in ? "IN" : "OUT"), + ep->dwc_ep.type, ep->dwc_ep.maxpacket, ep->desc); + dwc_otg_ep_activate(GET_CORE_IF(pcd), &ep->dwc_ep); + SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags); + return 0; +} + + +/** + * This function is called when an EP is disabled due to disconnect or + * change in configuration. Any pending requests will terminate with a + * status of -ESHUTDOWN. + * + * This function modifies the dwc_otg_ep_t data structure for this EP, + * and then calls dwc_otg_ep_deactivate. + */ +static int dwc_otg_pcd_ep_disable(struct usb_ep *_ep) +{ + dwc_otg_pcd_ep_t * ep; + unsigned long flags; + DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, _ep); + ep = container_of(_ep, dwc_otg_pcd_ep_t, ep); + if (!_ep || !ep->desc) { + DWC_DEBUGPL(DBG_PCD, "%s, %s not enabled\n", __func__, + _ep ? ep->ep.name : NULL); + return -EINVAL; + } + SPIN_LOCK_IRQSAVE(&ep->pcd->lock, flags); + request_nuke(ep); + dwc_otg_ep_deactivate(GET_CORE_IF(ep->pcd), &ep->dwc_ep); + ep->desc = 0; + ep->stopped = 1; + if (ep->dwc_ep.is_in) { + release_perio_tx_fifo(GET_CORE_IF(ep->pcd),ep->dwc_ep.tx_fifo_num); + release_tx_fifo(GET_CORE_IF(ep->pcd), ep->dwc_ep.tx_fifo_num); + } + SPIN_UNLOCK_IRQRESTORE(&ep->pcd->lock, flags); + DWC_DEBUGPL(DBG_PCD, "%s disabled\n", _ep->name); + return 0; +} + + +/** + * This function allocates a request object to use with the specified + * endpoint. + * + * @param _ep The endpoint to be used with with the request + * @param _gfp_flags the GFP_* flags to use. + */ +static struct usb_request *dwc_otg_pcd_alloc_request(struct usb_ep *_ep, + gfp_t _gfp_flags) +{ + dwc_otg_pcd_request_t * req; + DWC_DEBUGPL(DBG_PCDV, "%s(%p,%d)\n", __func__, _ep, _gfp_flags); + if (0 == _ep) { + DWC_WARN("%s() %s\n", __func__, "Invalid EP!\n"); + return 0; + } + req = kmalloc(sizeof(dwc_otg_pcd_request_t), _gfp_flags); + if (0 == req) { + DWC_WARN("%s() %s\n", __func__,"request allocation failed!\n"); + return 0; + } + memset(req, 0, sizeof(dwc_otg_pcd_request_t)); + req->req.dma = DMA_ADDR_INVALID; + INIT_LIST_HEAD(&req->queue); + return &req->req; +} + + +/** + * This function frees a request object. + * + * @param _ep The endpoint associated with the request + * @param _req The request being freed + */ +static void dwc_otg_pcd_free_request(struct usb_ep *_ep, + struct usb_request *_req) +{ + dwc_otg_pcd_request_t * req; + DWC_DEBUGPL(DBG_PCDV, "%s(%p,%p)\n", __func__, _ep, _req); + if (0 == _ep || 0 == _req) { + DWC_WARN("%s() %s\n", __func__,"Invalid ep or req argument!\n"); + return; + } + req = container_of(_req, dwc_otg_pcd_request_t, req); + kfree(req); +} + + +/** + * This function is used to submit an I/O Request to an EP. + * + * - When the request completes the request's completion callback + * is called to return the request to the driver. + * - An EP, except control EPs, may have multiple requests + * pending. + * - Once submitted the request cannot be examined or modified. + * - Each request is turned into one or more packets. + * - A BULK EP can queue any amount of data; the transfer is + * packetized. + * - Zero length Packets are specified with the request 'zero' + * flag. + */ +static int dwc_otg_pcd_ep_queue(struct usb_ep *_ep, struct usb_request *_req, + gfp_t _gfp_flags) +{ + int prevented = 0; + dwc_otg_pcd_request_t * req; + dwc_otg_pcd_ep_t * ep; + dwc_otg_pcd_t * pcd; + unsigned long flags = 0; + + DWC_DEBUGPL(DBG_PCDV, "%s(%p,%p,%d)\n", __func__, _ep, _req, + _gfp_flags); + req = container_of(_req, dwc_otg_pcd_request_t, req); + if (!_req || !_req->complete || !_req->buf + || !list_empty(&req->queue)) { + DWC_WARN("%s, bad params\n", __func__); + return -EINVAL; + } + ep = container_of(_ep, dwc_otg_pcd_ep_t, ep); + if (!_ep || (!ep->desc && ep->dwc_ep.num != 0)) { + DWC_WARN("%s, bad ep\n", __func__); + return -EINVAL; + } + pcd = ep->pcd; + if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) { + DWC_DEBUGPL(DBG_PCDV, "gadget.speed=%d\n", pcd->gadget.speed); + DWC_WARN("%s, bogus device state\n", __func__); + return -ESHUTDOWN; + } + DWC_DEBUGPL(DBG_PCD, "%s queue req %p, len %d buf %p\n", _ep->name, + _req, _req->length, _req->buf); + if (!GET_CORE_IF(pcd)->core_params->opt) { + if (ep->dwc_ep.num != 0) { + DWC_ERROR("%s queue req %p, len %d buf %p\n", + _ep->name, _req, _req->length, _req->buf); + } + } + SPIN_LOCK_IRQSAVE(&ep->pcd->lock, flags); + +#if defined(CONFIG_DWC_DEBUG) & defined(VERBOSE) + dump_msg(_req->buf, _req->length); + +#endif /* */ + _req->status = -EINPROGRESS; + _req->actual = 0; + + /* + * For EP0 IN without premature status, zlp is required? + */ + if (ep->dwc_ep.num == 0 && ep->dwc_ep.is_in) { + DWC_DEBUGPL(DBG_PCDV, "%s-OUT ZLP\n", _ep->name); + //_req->zero = 1; + } + + /* map virtual address to hardware */ + if (_req->dma == DMA_ADDR_INVALID) { + _req->dma = dma_map_single(ep->pcd->gadget.dev.parent, + _req->buf, + _req->length, + ep->dwc_ep.is_in + ? DMA_TO_DEVICE : + DMA_FROM_DEVICE); + req->mapped = 1; + } else { + dma_sync_single_for_device(ep->pcd->gadget.dev.parent, + _req->dma, _req->length, + ep->dwc_ep.is_in + ? DMA_TO_DEVICE : + DMA_FROM_DEVICE); + req->mapped = 0; + } + + /* Start the transfer */ + if (list_empty(&ep->queue) && !ep->stopped) { + /* EP0 Transfer? */ + if (ep->dwc_ep.num == 0) { + switch (pcd->ep0state) { + case EP0_IN_DATA_PHASE: + DWC_DEBUGPL(DBG_PCD, "%s ep0: EP0_IN_DATA_PHASE\n", + __func__); + break; + case EP0_OUT_DATA_PHASE: + DWC_DEBUGPL(DBG_PCD, "%s ep0: EP0_OUT_DATA_PHASE\n", + __func__); + if (pcd->request_config) { + /* Complete STATUS PHASE */ + ep->dwc_ep.is_in = 1; + pcd->ep0state = EP0_STATUS; + } + break; + default: + DWC_DEBUGPL(DBG_ANY, "ep0: odd state %d\n", + pcd->ep0state); + SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags); + return -EL2HLT; + } + ep->dwc_ep.dma_addr = _req->dma; + ep->dwc_ep.start_xfer_buff = _req->buf; + ep->dwc_ep.xfer_buff = _req->buf; + ep->dwc_ep.xfer_len = _req->length; + ep->dwc_ep.xfer_count = 0; + ep->dwc_ep.sent_zlp = 0; + ep->dwc_ep.total_len = ep->dwc_ep.xfer_len; + dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), + &ep->dwc_ep); + } else { + /* Setup and start the Transfer */ + ep->dwc_ep.dma_addr = _req->dma; + ep->dwc_ep.start_xfer_buff = _req->buf; + ep->dwc_ep.xfer_buff = _req->buf; + ep->dwc_ep.xfer_len = _req->length; + ep->dwc_ep.xfer_count = 0; + ep->dwc_ep.sent_zlp = 0; + ep->dwc_ep.total_len = ep->dwc_ep.xfer_len; + dwc_otg_ep_start_transfer(GET_CORE_IF(pcd), + &ep->dwc_ep); + } + } + if ((req != 0) || prevented) { + ++pcd->request_pending; + list_add_tail(&req->queue, &ep->queue); + if (ep->dwc_ep.is_in && ep->stopped + && !(GET_CORE_IF(pcd)->dma_enable)) { + /** @todo NGS Create a function for this. */ + diepmsk_data_t diepmsk = {.d32 = 0}; + diepmsk.b.intktxfemp = 1; + dwc_modify_reg32(&GET_CORE_IF(pcd)->dev_if->dev_global_regs->diepmsk, 0, + diepmsk.d32); + } + } + SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags); + return 0; +} + +/** + * This function cancels an I/O request from an EP. + */ +static int dwc_otg_pcd_ep_dequeue(struct usb_ep *_ep, + struct usb_request *_req) +{ + dwc_otg_pcd_request_t * req; + dwc_otg_pcd_ep_t * ep; + dwc_otg_pcd_t * pcd; + unsigned long flags; + DWC_DEBUGPL(DBG_PCDV, "%s(%p,%p)\n", __func__, _ep, _req); + ep = container_of(_ep, dwc_otg_pcd_ep_t, ep); + if (!_ep || !_req || (!ep->desc && ep->dwc_ep.num != 0)) { + DWC_WARN("%s, bad argument\n", __func__); + return -EINVAL; + } + pcd = ep->pcd; + if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) { + DWC_WARN("%s, bogus device state\n", __func__); + return -ESHUTDOWN; + } + SPIN_LOCK_IRQSAVE(&pcd->lock, flags); + DWC_DEBUGPL(DBG_PCDV, "%s %s %s %p\n", __func__, _ep->name, + ep->dwc_ep.is_in ? "IN" : "OUT", _req); + + /* make sure it's actually queued on this endpoint */ + list_for_each_entry(req, &ep->queue, queue) { + if (&req->req == _req) { + break; + } + } + if (&req->req != _req) { + SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags); + return -EINVAL; + } + if (!list_empty(&req->queue)) { + request_done(ep, req, -ECONNRESET); + } else { + req = 0; + } + SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags); + return req ? 0 : -EOPNOTSUPP; +} + +/** + * usb_ep_set_halt stalls an endpoint. + * + * usb_ep_clear_halt clears an endpoint halt and resets its data + * toggle. + * + * Both of these functions are implemented with the same underlying + * function. The behavior depends on the value argument. + * + * @param[in] _ep the Endpoint to halt or clear halt. + * @param[in] _value + * - 0 means clear_halt. + * - 1 means set_halt, + * - 2 means clear stall lock flag. + * - 3 means set stall lock flag. + */ +static int dwc_otg_pcd_ep_set_halt(struct usb_ep *_ep, int _value) +{ + int retval = 0; + unsigned long flags; + dwc_otg_pcd_ep_t * ep = 0; + DWC_DEBUGPL(DBG_PCD, "HALT %s %d\n", _ep->name, _value); + ep = container_of(_ep, dwc_otg_pcd_ep_t, ep); + if (!_ep || (!ep->desc && ep != &ep->pcd->ep0) + || ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) { + DWC_WARN("%s, bad ep\n", __func__); + return -EINVAL; + } + SPIN_LOCK_IRQSAVE(&ep->pcd->lock, flags); + if (ep->dwc_ep.is_in && !list_empty(&ep->queue)) { + DWC_WARN("%s() %s XFer In process\n", __func__, _ep->name); + retval = -EAGAIN; + } else if (_value == 0) { + dwc_otg_ep_clear_stall(ep->pcd->otg_dev->core_if,&ep->dwc_ep); + } else if (_value == 1) { + if (ep->dwc_ep.num == 0) { + ep->pcd->ep0state = EP0_STALL; + } + ep->stopped = 1; + dwc_otg_ep_set_stall(ep->pcd->otg_dev->core_if, &ep->dwc_ep); + } else if (_value == 2) { + ep->dwc_ep.stall_clear_flag = 0; + } else if (_value == 3) { + ep->dwc_ep.stall_clear_flag = 1; + } + SPIN_UNLOCK_IRQRESTORE(&ep->pcd->lock, flags); + return retval; +} + +static struct usb_ep_ops dwc_otg_pcd_ep_ops = +{ + .enable = dwc_otg_pcd_ep_enable, + .disable = dwc_otg_pcd_ep_disable, + .alloc_request = dwc_otg_pcd_alloc_request, + .free_request = dwc_otg_pcd_free_request, + .queue = dwc_otg_pcd_ep_queue, + .dequeue = dwc_otg_pcd_ep_dequeue, + .set_halt = dwc_otg_pcd_ep_set_halt, + .fifo_status = 0, + .fifo_flush = 0, +}; + +/* Gadget Operations */ +/** + * The following gadget operations will be implemented in the DWC_otg + * PCD. Functions in the API that are not described below are not + * implemented. + * + * The Gadget API provides wrapper functions for each of the function + * pointers defined in usb_gadget_ops. The Gadget Driver calls the + * wrapper function, which then calls the underlying PCD function. The + * following sections are named according to the wrapper functions + * (except for ioctl, which doesn't have a wrapper function). Within + * each section, the corresponding DWC_otg PCD function name is + * specified. + * + */ + +/** + *Gets the USB Frame number of the last SOF. + */ +static int dwc_otg_pcd_get_frame(struct usb_gadget *_gadget) +{ + dwc_otg_pcd_t * pcd; + DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, _gadget); + if (_gadget == 0) { + return -ENODEV; + } else { + pcd = container_of(_gadget, dwc_otg_pcd_t, gadget); + dwc_otg_get_frame_number(GET_CORE_IF(pcd)); + } + return 0; +} +void dwc_otg_pcd_initiate_srp(dwc_otg_pcd_t * _pcd) +{ + uint32_t * addr = (uint32_t *) &(GET_CORE_IF(_pcd)->core_global_regs->gotgctl); + gotgctl_data_t mem; + gotgctl_data_t val; + val.d32 = dwc_read_reg32(addr); + if (val.b.sesreq) { + DWC_ERROR("Session Request Already active!\n"); + return; + } + DWC_NOTICE("Session Request Initated\n"); + mem.d32 = dwc_read_reg32(addr); + mem.b.sesreq = 1; + dwc_write_reg32(addr, mem.d32); + + /* Start the SRP timer */ + dwc_otg_pcd_start_srp_timer(_pcd); + return; +} +void dwc_otg_pcd_remote_wakeup(dwc_otg_pcd_t * _pcd, int set) +{ + dctl_data_t dctl = {.d32 = 0}; + volatile uint32_t *addr = &(GET_CORE_IF(_pcd)->dev_if->dev_global_regs->dctl); + if (dwc_otg_is_device_mode(GET_CORE_IF(_pcd))) { + if (_pcd->remote_wakeup_enable) { + if (set) { + dctl.b.rmtwkupsig = 1; + dwc_modify_reg32(addr, 0, dctl.d32); + DWC_DEBUGPL(DBG_PCD, "Set Remote Wakeup\n"); + mdelay(1); + dwc_modify_reg32(addr, dctl.d32, 0); + DWC_DEBUGPL(DBG_PCD, "Clear Remote Wakeup\n"); + } else { + } + } else { + DWC_DEBUGPL(DBG_PCD, "Remote Wakeup is disabled\n"); + } + } + return; +} + + +/** + * Initiates Session Request Protocol (SRP) to wakeup the host if no + * session is in progress. If a session is already in progress, but + * the device is suspended, remote wakeup signaling is started. + * + */ +static int dwc_otg_pcd_wakeup(struct usb_gadget *_gadget) +{ + unsigned long flags; + dwc_otg_pcd_t * pcd; + dsts_data_t dsts; + gotgctl_data_t gotgctl; + DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, _gadget); + if (_gadget == 0) { + return -ENODEV; + } else { + pcd = container_of(_gadget, dwc_otg_pcd_t, gadget); + } + SPIN_LOCK_IRQSAVE(&pcd->lock, flags); + + /* + * This function starts the Protocol if no session is in progress. If + * a session is already in progress, but the device is suspended, + * remote wakeup signaling is started. + */ + + /* Check if valid session */ + gotgctl.d32 = dwc_read_reg32(&(GET_CORE_IF(pcd)->core_global_regs->gotgctl)); + if (gotgctl.b.bsesvld) { + + /* Check if suspend state */ + dsts.d32 = dwc_read_reg32(&(GET_CORE_IF(pcd)->dev_if->dev_global_regs->dsts)); + if (dsts.b.suspsts) { + dwc_otg_pcd_remote_wakeup(pcd, 1); + } + } else { + dwc_otg_pcd_initiate_srp(pcd); + } + SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags); + return 0; +} + +static const struct usb_gadget_ops dwc_otg_pcd_ops = +{ + .get_frame = dwc_otg_pcd_get_frame, + .wakeup = dwc_otg_pcd_wakeup, + // current versions must always be self-powered +}; + +/** + * This function updates the otg values in the gadget structure. + */ +void dwc_otg_pcd_update_otg(dwc_otg_pcd_t * _pcd, const unsigned _reset) +{ + if (!_pcd->gadget.is_otg) + return; + if (_reset) { + _pcd->b_hnp_enable = 0; + _pcd->a_hnp_support = 0; + _pcd->a_alt_hnp_support = 0; + } + _pcd->gadget.b_hnp_enable = _pcd->b_hnp_enable; + _pcd->gadget.a_hnp_support = _pcd->a_hnp_support; + _pcd->gadget.a_alt_hnp_support = _pcd->a_alt_hnp_support; +} + +/** + * This function is the top level PCD interrupt handler. + */ +static irqreturn_t dwc_otg_pcd_irq(int _irq, void *_dev) +{ + dwc_otg_pcd_t * pcd = _dev; + int32_t retval = IRQ_NONE; + retval = dwc_otg_pcd_handle_intr(pcd); + return IRQ_RETVAL(retval); +} + +/** + * PCD Callback function for initializing the PCD when switching to + * device mode. + * + * @param _p void pointer to the <code>dwc_otg_pcd_t</code> + */ +static int32_t dwc_otg_pcd_start_cb(void *_p) +{ + dwc_otg_pcd_t * pcd = (dwc_otg_pcd_t *) _p; + + /* + * Initialized the Core for Device mode. + */ + if (dwc_otg_is_device_mode(GET_CORE_IF(pcd))) { + dwc_otg_core_dev_init(GET_CORE_IF(pcd)); + } + return 1; +} + +/** + * PCD Callback function for stopping the PCD when switching to Host + * mode. + * + * @param _p void pointer to the <code>dwc_otg_pcd_t</code> + */ +static int32_t dwc_otg_pcd_stop_cb(void *_p) +{ + dwc_otg_pcd_t * pcd = (dwc_otg_pcd_t *) _p; + extern void dwc_otg_pcd_stop(dwc_otg_pcd_t * _pcd); + dwc_otg_pcd_stop(pcd); + return 1; +} + +/** + * PCD Callback function for notifying the PCD when resuming from + * suspend. + * + * @param _p void pointer to the <code>dwc_otg_pcd_t</code> + */ +static int32_t dwc_otg_pcd_suspend_cb(void *_p) +{ + dwc_otg_pcd_t * pcd = (dwc_otg_pcd_t *) _p; + if (pcd->driver && pcd->driver->resume) { + SPIN_UNLOCK(&pcd->lock); + pcd->driver->suspend(&pcd->gadget); + SPIN_LOCK(&pcd->lock); + } + return 1; +} + + +/** + * PCD Callback function for notifying the PCD when resuming from + * suspend. + * + * @param _p void pointer to the <code>dwc_otg_pcd_t</code> + */ +static int32_t dwc_otg_pcd_resume_cb(void *_p) +{ + dwc_otg_pcd_t * pcd = (dwc_otg_pcd_t *) _p; + if (pcd->driver && pcd->driver->resume) { + SPIN_UNLOCK(&pcd->lock); + pcd->driver->resume(&pcd->gadget); + SPIN_LOCK(&pcd->lock); + } + + /* Stop the SRP timeout timer. */ + if ((GET_CORE_IF(pcd)->core_params->phy_type != + DWC_PHY_TYPE_PARAM_FS) || (!GET_CORE_IF(pcd)->core_params->i2c_enable)) { + if (GET_CORE_IF(pcd)->srp_timer_started) { + GET_CORE_IF(pcd)->srp_timer_started = 0; + del_timer(&pcd->srp_timer); + } + } + return 1; +} + +/** + * PCD Callback structure for handling mode switching. + */ +static dwc_otg_cil_callbacks_t pcd_callbacks = +{ + .start = dwc_otg_pcd_start_cb, + .stop = dwc_otg_pcd_stop_cb, + .suspend = dwc_otg_pcd_suspend_cb, + .resume_wakeup = dwc_otg_pcd_resume_cb, + .p = 0, /* Set at registration */ +}; + +/** + * This function is called when the SRP timer expires. The SRP should + * complete within 6 seconds. + */ +static void srp_timeout(unsigned long _ptr) +{ + gotgctl_data_t gotgctl; + dwc_otg_core_if_t * core_if = (dwc_otg_core_if_t *) _ptr; + volatile uint32_t *addr = &core_if->core_global_regs->gotgctl; + gotgctl.d32 = dwc_read_reg32(addr); + core_if->srp_timer_started = 0; + if ((core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS) && + (core_if->core_params->i2c_enable)) { + DWC_PRINT("SRP Timeout\n"); + if ((core_if->srp_success) && (gotgctl.b.bsesvld)) { + if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) { + core_if->pcd_cb->resume_wakeup(core_if-> + pcd_cb->p); + } + + /* Clear Session Request */ + gotgctl.d32 = 0; + gotgctl.b.sesreq = 1; + dwc_modify_reg32(&core_if->core_global_regs->gotgctl,gotgctl.d32, 0); + core_if->srp_success = 0; + } else { + DWC_ERROR("Device not connected/responding\n"); + gotgctl.b.sesreq = 0; + dwc_write_reg32(addr, gotgctl.d32); + } + } else if (gotgctl.b.sesreq) { + DWC_PRINT("SRP Timeout\n"); + DWC_ERROR("Device not connected/responding\n"); + gotgctl.b.sesreq = 0; + dwc_write_reg32(addr, gotgctl.d32); + } else { + DWC_PRINT(" SRP GOTGCTL=%0x\n", gotgctl.d32); + } +} + +/** + * Start the SRP timer to detect when the SRP does not complete within + * 6 seconds. + * + * @param _pcd the pcd structure. + */ +void dwc_otg_pcd_start_srp_timer(dwc_otg_pcd_t * _pcd) +{ + struct timer_list *srp_timer = &_pcd->srp_timer; + GET_CORE_IF(_pcd)->srp_timer_started = 1; + init_timer(srp_timer); + srp_timer->function = srp_timeout; + srp_timer->data = (unsigned long)GET_CORE_IF(_pcd); + srp_timer->expires = jiffies + (HZ * 6); + add_timer(srp_timer); +} + +/** + * Tasklet + * + */ +extern void start_next_request(dwc_otg_pcd_ep_t * _ep); + +static void start_xfer_tasklet_func(unsigned long data) +{ + dwc_otg_pcd_t * pcd = (dwc_otg_pcd_t *) data; + dwc_otg_core_if_t * core_if = pcd->otg_dev->core_if; + int i; + depctl_data_t diepctl; + DWC_DEBUGPL(DBG_PCDV, "Start xfer tasklet\n"); + diepctl.d32 = + dwc_read_reg32(&core_if->dev_if->in_ep_regs[0]->diepctl); + if (pcd->ep0.queue_sof) { + pcd->ep0.queue_sof = 0; + start_next_request(&pcd->ep0); + // break; + } + for (i = 0; i < core_if->dev_if->num_in_eps; i++) { + depctl_data_t diepctl; + diepctl.d32 = + dwc_read_reg32(&core_if->dev_if->in_ep_regs[i]->diepctl); + if (pcd->in_ep[i].queue_sof) { + pcd->in_ep[i].queue_sof = 0; + start_next_request(&pcd->in_ep[i]); + // break; + } + } + return; +} + +static struct tasklet_struct start_xfer_tasklet = +{ + .next = NULL, + .state = 0, + .count = ATOMIC_INIT(0), + .func = start_xfer_tasklet_func, + .data = 0, +}; + +/** + * This function initialized the pcd Dp structures to there default + * state. + * + * @param _pcd the pcd structure. + */ +void dwc_otg_pcd_reinit(dwc_otg_pcd_t * _pcd) +{ + static const char *names[] = + { + "ep0", "ep1in", "ep2in", "ep3in", "ep4in", "ep5in", + "ep6in", "ep7in", "ep8in", "ep9in", "ep10in", "ep11in", "ep12in", "ep13in", + "ep14in", "ep15in", "ep1out", "ep2out", "ep3out", "ep4out", "ep5out", + "ep6out", "ep7out", "ep8out", "ep9out", "ep10out", "ep11out", "ep12out", + "ep13out", "ep14out", "ep15out" + }; + + int i; + int in_ep_cntr, out_ep_cntr; + uint32_t hwcfg1; + uint32_t num_in_eps = (GET_CORE_IF(_pcd))->dev_if->num_in_eps; + uint32_t num_out_eps = (GET_CORE_IF(_pcd))->dev_if->num_out_eps; + dwc_otg_pcd_ep_t * ep; + DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, _pcd); + INIT_LIST_HEAD(&_pcd->gadget.ep_list); + _pcd->gadget.ep0 = &_pcd->ep0.ep; + _pcd->gadget.speed = USB_SPEED_UNKNOWN; + INIT_LIST_HEAD(&_pcd->gadget.ep0->ep_list); + + /** + * Initialize the EP0 structure. + */ + ep = &_pcd->ep0; + + /* Init EP structure */ + ep->desc = 0; + ep->pcd = _pcd; + ep->stopped = 1; + + /* Init DWC ep structure */ + ep->dwc_ep.num = 0; + ep->dwc_ep.active = 0; + ep->dwc_ep.tx_fifo_num = 0; + + /* Control until ep is actvated */ + ep->dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL; + ep->dwc_ep.maxpacket = MAX_PACKET_SIZE; + ep->dwc_ep.dma_addr = 0; + ep->dwc_ep.start_xfer_buff = 0; + ep->dwc_ep.xfer_buff = 0; + ep->dwc_ep.xfer_len = 0; + ep->dwc_ep.xfer_count = 0; + ep->dwc_ep.sent_zlp = 0; + ep->dwc_ep.total_len = 0; + ep->queue_sof = 0; + + /* Init the usb_ep structure. */ + ep->ep.name = names[0]; + ep->ep.ops = &dwc_otg_pcd_ep_ops; + + /** + * @todo NGS: What should the max packet size be set to + * here? Before EP type is set? + */ + ep->ep.maxpacket = MAX_PACKET_SIZE; + list_add_tail(&ep->ep.ep_list, &_pcd->gadget.ep_list); + INIT_LIST_HEAD(&ep->queue); + + /** + * Initialize the EP structures. + */ + in_ep_cntr = 0; + hwcfg1 = (GET_CORE_IF(_pcd))->hwcfg1.d32 >> 3; + for (i = 1; in_ep_cntr < num_in_eps; i++) { + if ((hwcfg1 & 0x1) == 0) { + dwc_otg_pcd_ep_t * ep = &_pcd->in_ep[in_ep_cntr]; + in_ep_cntr++; + + /* Init EP structure */ + ep->desc = 0; + ep->pcd = _pcd; + ep->stopped = 1; + + /* Init DWC ep structure */ + ep->dwc_ep.is_in = 1; + ep->dwc_ep.num = i; + ep->dwc_ep.active = 0; + ep->dwc_ep.tx_fifo_num = 0; + + /* Control until ep is actvated */ + ep->dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL; + ep->dwc_ep.maxpacket = MAX_PACKET_SIZE; + ep->dwc_ep.dma_addr = 0; + ep->dwc_ep.start_xfer_buff = 0; + ep->dwc_ep.xfer_buff = 0; + ep->dwc_ep.xfer_len = 0; + ep->dwc_ep.xfer_count = 0; + ep->dwc_ep.sent_zlp = 0; + ep->dwc_ep.total_len = 0; + ep->queue_sof = 0; + + /* Init the usb_ep structure. */ + /** + * @todo NGS: Add direction to EP, based on contents + * of HWCFG1. Need a copy of HWCFG1 in pcd structure? + * sprintf( ";r + */ + ep->ep.name = names[i]; + ep->ep.ops = &dwc_otg_pcd_ep_ops; + + /** + * @todo NGS: What should the max packet size be set to + * here? Before EP type is set? + */ + ep->ep.maxpacket = MAX_PACKET_SIZE; + list_add_tail(&ep->ep.ep_list, &_pcd->gadget.ep_list); + INIT_LIST_HEAD(&ep->queue); + } + hwcfg1 >>= 2; + } + out_ep_cntr = 0; + hwcfg1 = (GET_CORE_IF(_pcd))->hwcfg1.d32 >> 2; + for (i = 1; out_ep_cntr < num_out_eps; i++) { + if ((hwcfg1 & 0x1) == 0) { + dwc_otg_pcd_ep_t * ep = &_pcd->out_ep[out_ep_cntr]; + out_ep_cntr++; + + /* Init EP structure */ + ep->desc = 0; + ep->pcd = _pcd; + ep->stopped = 1; + + /* Init DWC ep structure */ + ep->dwc_ep.is_in = 0; + ep->dwc_ep.num = i; + ep->dwc_ep.active = 0; + ep->dwc_ep.tx_fifo_num = 0; + + /* Control until ep is actvated */ + ep->dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL; + ep->dwc_ep.maxpacket = MAX_PACKET_SIZE; + ep->dwc_ep.dma_addr = 0; + ep->dwc_ep.start_xfer_buff = 0; + ep->dwc_ep.xfer_buff = 0; + ep->dwc_ep.xfer_len = 0; + ep->dwc_ep.xfer_count = 0; + ep->dwc_ep.sent_zlp = 0; + ep->dwc_ep.total_len = 0; + ep->queue_sof = 0; + + /* Init the usb_ep structure. */ + /** + * @todo NGS: Add direction to EP, based on contents + * of HWCFG1. Need a copy of HWCFG1 in pcd structure? + * sprintf( ";r + */ + ep->ep.name = names[15 + i]; + ep->ep.ops = &dwc_otg_pcd_ep_ops; + + /** + * @todo NGS: What should the max packet size be set to + * here? Before EP type is set? + */ + ep->ep.maxpacket = MAX_PACKET_SIZE; + list_add_tail(&ep->ep.ep_list, &_pcd->gadget.ep_list); + INIT_LIST_HEAD(&ep->queue); + } + hwcfg1 >>= 2; + } + + /* remove ep0 from the list. There is a ep0 pointer. */ + list_del_init(&_pcd->ep0.ep.ep_list); + _pcd->ep0state = EP0_DISCONNECT; + _pcd->ep0.ep.maxpacket = MAX_EP0_SIZE; + _pcd->ep0.dwc_ep.maxpacket = MAX_EP0_SIZE; + _pcd->ep0.dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL; +} + +/** + * This function releases the Gadget device. + * required by device_unregister(). + * + * @todo Should this do something? Should it free the PCD? + */ +static void dwc_otg_pcd_gadget_release(struct device *_dev) +{ + DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, _dev); +} + +/** + * This function initialized the PCD portion of the driver. + * + */ +int __init dwc_otg_pcd_init(struct device *_dev) +{ + static char pcd_name[] = "dwc_otg_pcd"; + dwc_otg_pcd_t * pcd; + dwc_otg_device_t * otg_dev = dev_get_drvdata(_dev); + int retval = 0; + DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, _dev); + + /* + * Allocate PCD structure + */ + pcd = kmalloc(sizeof(dwc_otg_pcd_t), GFP_KERNEL); + if (pcd == 0) { + return -ENOMEM; + } + memset(pcd, 0, sizeof(dwc_otg_pcd_t)); + spin_lock_init(&pcd->lock); + otg_dev->pcd = pcd; + s_pcd = pcd; + pcd->gadget.name = pcd_name; + dev_set_name(&pcd->gadget.dev, "gadget"); + pcd->otg_dev = dev_get_drvdata(_dev); + pcd->gadget.dev.parent = _dev; + pcd->gadget.dev.release = dwc_otg_pcd_gadget_release; + pcd->gadget.ops = &dwc_otg_pcd_ops; + if (GET_CORE_IF(pcd)->hwcfg4.b.ded_fifo_en) { + DWC_PRINT("Dedicated Tx FIFOs mode\n"); + } else { + DWC_PRINT("Shared Tx FIFO mode\n"); + } + + /* If the module is set to FS or if the PHY_TYPE is FS then the gadget + * should not report as dual-speed capable. replace the following line + * with the block of code below it once the software is debugged for + * this. If is_dualspeed = 0 then the gadget driver should not report + * a device qualifier descriptor when queried. */ + if ((GET_CORE_IF(pcd)->core_params->speed == DWC_SPEED_PARAM_FULL) + || ((GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type == 2) + && (GET_CORE_IF(pcd)->hwcfg2.b.fs_phy_type == 1) + && (GET_CORE_IF(pcd)->core_params->ulpi_fs_ls))) { + pcd->gadget.is_dualspeed = 0; + } else { + pcd->gadget.is_dualspeed = 1; + } + if ((otg_dev->core_if->hwcfg2.b.op_mode == + DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE) + || (otg_dev->core_if->hwcfg2.b.op_mode == + DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST) + || (otg_dev->core_if->hwcfg2.b.op_mode == + DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) + || (otg_dev->core_if->hwcfg2.b.op_mode == + DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)) { + pcd->gadget.is_otg = 0; + } else { + pcd->gadget.is_otg = 1; + } + pcd->driver = 0; + + /* Register the gadget device */ + retval = device_register(&pcd->gadget.dev); + + /* + * Initialized the Core for Device mode. + */ + if (dwc_otg_is_device_mode(GET_CORE_IF(pcd))) { + dwc_otg_core_dev_init(GET_CORE_IF(pcd)); + } + + /* + * Initialize EP structures + */ + dwc_otg_pcd_reinit(pcd); + + /* + * Register the PCD Callbacks. + */ + dwc_otg_cil_register_pcd_callbacks(otg_dev->core_if, &pcd_callbacks,pcd); + + /* + * Setup interupt handler + */ + DWC_DEBUGPL(DBG_ANY, "registering handler for irq%d\n",otg_dev->irq); + retval = request_irq(otg_dev->irq, dwc_otg_pcd_irq, IRQF_SHARED, + pcd->gadget.name, pcd); + if (retval != 0) { + DWC_ERROR("request of irq%d failed\n", otg_dev->irq); + kfree(pcd); + return -EBUSY; + } + + /* + * Initialize the DMA buffer for SETUP packets + */ + if (GET_CORE_IF(pcd)->dma_enable) { + pcd->setup_pkt = dma_alloc_coherent(_dev, sizeof(*pcd->setup_pkt) * 5, + &pcd->setup_pkt_dma_handle, 0); + pcd->status_buf = dma_alloc_coherent(_dev, sizeof(uint16_t), + &pcd->status_buf_dma_handle, 0); + } else { + pcd->setup_pkt = kmalloc(sizeof(*pcd->setup_pkt) * 5, GFP_KERNEL); + pcd->status_buf = kmalloc(sizeof(uint16_t), GFP_KERNEL); + } + if (pcd->setup_pkt == 0) { + kfree(pcd); + return -ENOMEM; + } + + /* Initialize tasklet */ + start_xfer_tasklet.data = (unsigned long)pcd; + pcd->start_xfer_tasklet = &start_xfer_tasklet; + return 0; +} + +/** + * Cleanup the PCD. + */ +void dwc_otg_pcd_remove(struct device *_dev) +{ + dwc_otg_device_t * otg_dev = dev_get_drvdata(_dev); + dwc_otg_pcd_t * pcd = otg_dev->pcd; + DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, _dev); + + /* + * Free the IRQ + */ + free_irq(otg_dev->irq, pcd); + + /* start with the driver above us */ + if (pcd->driver) { + + /* should have been done already by driver model core */ + DWC_WARN("driver '%s' is still registered\n",pcd->driver->driver.name); + usb_gadget_unregister_driver(pcd->driver); + } + device_unregister(&pcd->gadget.dev); + if (GET_CORE_IF(pcd)->dma_enable) { + dma_free_coherent(NULL, sizeof(*pcd->setup_pkt) * 5, + pcd->setup_pkt, pcd->setup_pkt_dma_handle); + dma_free_coherent(NULL, sizeof(uint16_t), pcd->status_buf, + pcd->status_buf_dma_handle); + } else { + kfree(pcd->setup_pkt); + kfree(pcd->status_buf); + } + kfree(pcd); + otg_dev->pcd = 0; +} + + +/** + * This function registers a gadget driver with the PCD. + * + * When a driver is successfully registered, it will receive control + * requests including set_configuration(), which enables non-control + * requests. then usb traffic follows until a disconnect is reported. + * then a host may connect again, or the driver might get unbound. + * + * @param _driver The driver being registered + */ +int usb_gadget_register_driver(struct usb_gadget_driver *_driver) +{ + int retval; + DWC_DEBUGPL(DBG_PCD, "registering gadget driver '%s'\n", + _driver->driver.name); + if (!_driver || _driver->speed == USB_SPEED_UNKNOWN || !_driver->bind + || !_driver->disconnect || !_driver->setup) { + DWC_DEBUGPL(DBG_PCDV, "EINVAL\n"); +#if 1 + printk("_driver=0x%p speed=0x%x bind=0x%p unbind=0x%p disconnect=0x%p setup=0x%p\n", _driver, _driver->speed, _driver->bind, _driver->unbind, _driver->disconnect, _driver->setup); +#endif + return -EINVAL; + } + if (s_pcd == 0) { + DWC_DEBUGPL(DBG_PCDV, "ENODEV\n"); + return -ENODEV; + } + if (s_pcd->driver != 0) { + DWC_DEBUGPL(DBG_PCDV, "EBUSY (%p)\n", s_pcd->driver); + return -EBUSY; + } + + /* hook up the driver */ + s_pcd->driver = _driver; + s_pcd->gadget.dev.driver = &_driver->driver; + { + dwc_otg_core_if_t *_core_if = s_pcd->otg_dev->core_if; + if(_core_if) { + dwc_otg_disable_global_interrupts(_core_if); + dwc_otg_core_init(_core_if); + dwc_otg_pcd_reinit(s_pcd); + dwc_otg_enable_global_interrupts(_core_if); + if (_core_if->pcd_cb) + dwc_otg_pcd_start_cb(_core_if->pcd_cb->p); + } + + } + DWC_DEBUGPL(DBG_PCD, "bind to driver %s\n", _driver->driver.name); + retval = _driver->bind(&s_pcd->gadget); + if (retval) { + DWC_ERROR("bind to driver %s --> error %d\n", + _driver->driver.name, retval); + s_pcd->driver = 0; + s_pcd->gadget.dev.driver = 0; + return retval; + } + DWC_DEBUGPL(DBG_ANY, "registered gadget driver '%s'\n", + _driver->driver.name); + return 0; +} +EXPORT_SYMBOL(usb_gadget_register_driver); + +/** + * This function unregisters a gadget driver + * + * @param _driver The driver being unregistered + */ +int usb_gadget_unregister_driver(struct usb_gadget_driver *_driver) +{ + + //DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n", __func__, _driver); + if (s_pcd == 0) { + DWC_DEBUGPL(DBG_ANY, "%s Return(%d): s_pcd==0\n", __func__,-ENODEV); + return -ENODEV; + } + if (_driver == 0 || _driver != s_pcd->driver) { + DWC_DEBUGPL(DBG_ANY, "%s Return(%d): driver?\n", __func__,-EINVAL); + return -EINVAL; + } + _driver->unbind(&s_pcd->gadget); + s_pcd->driver = 0; + DWC_DEBUGPL(DBG_ANY, "unregistered driver '%s'\n", + _driver->driver.name); + return 0; +} +EXPORT_SYMBOL(usb_gadget_unregister_driver); + +#endif /* DWC_HOST_ONLY */ diff --git a/drivers/usb/gadget/dwc_otg/linux/dwc_otg_plat.h b/drivers/usb/gadget/dwc_otg/linux/dwc_otg_plat.h index c2fe8caecf6..540451ec06d 100644 --- a/drivers/usb/gadget/dwc_otg/linux/dwc_otg_plat.h +++ b/drivers/usb/gadget/dwc_otg/linux/dwc_otg_plat.h @@ -242,6 +242,8 @@ static inline uint32_t SET_DEBUG_LEVEL( const uint32_t _new ) * mode. */ #define DBG_HCD_URB (0x800) +#define DBG_SP (0x400) + /** When debug level has any bit set, display debug messages */ #define DBG_ANY (0xFF) @@ -268,7 +270,7 @@ static inline uint32_t SET_DEBUG_LEVEL( const uint32_t _new ) * usb-DWC_otg: dwc_otg_cil_init(ca867000) * </code> */ -#ifdef DEBUG +#ifdef CONFIG_DWC_DEBUG # define DWC_DEBUGPL(lvl, x...) do{ if ((lvl)&g_dbg_lvl)printk( KERN_ERR USB_DWC x ); }while(0) # define DWC_DEBUGP(x...) DWC_DEBUGPL(DBG_ANY, x ) diff --git a/drivers/usb/gadget/dwc_otg/linux/dwc_otg_plat.h.org b/drivers/usb/gadget/dwc_otg/linux/dwc_otg_plat.h.org new file mode 100644 index 00000000000..c2fe8caecf6 --- /dev/null +++ b/drivers/usb/gadget/dwc_otg/linux/dwc_otg_plat.h.org @@ -0,0 +1,304 @@ +/* ========================================================================== + * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/platform/dwc_otg_plat.h $ + * $Revision: #1 $ + * $Date: 2005/07/07 $ + * $Change: 510301 $ + * + * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, + * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless + * otherwise expressly agreed to in writing between Synopsys and you. + * + * The Software IS NOT an item of Licensed Software or Licensed Product under + * any End User Software License Agreement or Agreement for Licensed Product + * with Synopsys or any supplement thereto. You are permitted to use and + * redistribute this Software in source and binary forms, with or without + * modification, provided that redistributions of source code must retain this + * notice. You may not view, use, disclose, copy or distribute this file or + * any information contained herein except pursuant to this license grant from + * Synopsys. If you do not agree with this notice, including the disclaimer + * below, then you are not authorized to use the Software. + * + * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * ========================================================================== */ + +#if !defined(__DWC_OTG_PLAT_H__) +#define __DWC_OTG_PLAT_H__ + +#include <linux/types.h> +#include <linux/slab.h> +#include <linux/list.h> +#include <linux/delay.h> +#include <asm/io.h> + +/** + * @file + * + * This file contains the Platform Specific constants, interfaces + * (functions and macros) for Linux. + * + */ +#if !defined(CONFIG_4xx) +#error "The contents of this file are AMCC 44x processor specific!!!" +#endif + +#if defined(CONFIG_405EX) || defined(CONFIG_460EX) || \ + defined(CONFIG_APM82181) +#define CONFIG_DWC_OTG_REG_LE +#endif + +#if defined(CONFIG_405EZ) +#define CONFIG_DWC_OTG_FIFO_LE +#endif + +#define SZ_256K 0x00040000 +/** + * Reads the content of a register. + * + * @param _reg address of register to read. + * @return contents of the register. + * + + * Usage:<br> + * <code>uint32_t dev_ctl = dwc_read_reg32(&dev_regs->dctl);</code> + */ +static __inline__ uint32_t dwc_read_reg32( volatile uint32_t *_reg) +{ +#ifdef CONFIG_DWC_OTG_REG_LE + return in_le32(_reg); +#else + return in_be32(_reg); +#endif +}; + +/** + * Writes a register with a 32 bit value. + * + * @param _reg address of register to read. + * @param _value to write to _reg. + * + * Usage:<br> + * <code>dwc_write_reg32(&dev_regs->dctl, 0); </code> + */ +static __inline__ void dwc_write_reg32( volatile uint32_t *_reg, const uint32_t _value) +{ +#ifdef CONFIG_DWC_OTG_REG_LE + out_le32(_reg, _value); +#else + out_be32(_reg, _value); +#endif +}; + +/** + * This function modifies bit values in a register. Using the + * algorithm: (reg_contents & ~clear_mask) | set_mask. + * + * @param _reg address of register to read. + * @param _clear_mask bit mask to be cleared. + * @param _set_mask bit mask to be set. + * + * Usage:<br> + * <code> // Clear the SOF Interrupt Mask bit and <br> + * // set the OTG Interrupt mask bit, leaving all others as they were. + * dwc_modify_reg32(&dev_regs->gintmsk, DWC_SOF_INT, DWC_OTG_INT);</code> + */ +static __inline__ +void dwc_modify_reg32( volatile uint32_t *_reg, const uint32_t _clear_mask, const uint32_t _set_mask) +{ +#ifdef CONFIG_DWC_OTG_REG_LE + out_le32( _reg, (in_le32(_reg) & ~_clear_mask) | _set_mask ); +#else + out_be32( _reg, (in_be32(_reg) & ~_clear_mask) | _set_mask ); +#endif +}; + +static __inline__ void dwc_write_datafifo32( volatile uint32_t *_reg, const uint32_t _value) +{ +#ifdef CONFIG_DWC_OTG_FIFO_LE + out_le32(_reg, _value); +#else + out_be32(_reg, _value); +#endif +}; + +static __inline__ uint32_t dwc_read_datafifo32( volatile uint32_t *_reg) +{ +#ifdef CONFIG_DWC_OTG_FIFO_LE + return in_le32(_reg); +#else + return in_be32(_reg); +#endif +}; + + +/** + * Wrapper for the OS micro-second delay function. + * @param[in] _usecs Microseconds of delay + */ +static __inline__ void UDELAY( const uint32_t _usecs ) +{ + udelay( _usecs ); +} + +/** + * Wrapper for the OS milli-second delay function. + * @param[in] _msecs milliseconds of delay + */ +static __inline__ void MDELAY( const uint32_t _msecs ) +{ + mdelay( _msecs ); +} + +/** + * Wrapper for the Linux spin_lock. On the ARM (Integrator) + * spin_lock() is a nop. + * + * @param _lock Pointer to the spinlock. + */ +static __inline__ void SPIN_LOCK( spinlock_t *_lock ) +{ + spin_lock(_lock); +} + +/** + * Wrapper for the Linux spin_unlock. On the ARM (Integrator) + * spin_lock() is a nop. + * + * @param _lock Pointer to the spinlock. + */ +static __inline__ void SPIN_UNLOCK( spinlock_t *_lock ) +{ + spin_unlock(_lock); +} + +/** + * Wrapper (macro) for the Linux spin_lock_irqsave. On the ARM + * (Integrator) spin_lock() is a nop. + * + * @param _l Pointer to the spinlock. + * @param _f unsigned long for irq flags storage. + */ +#define SPIN_LOCK_IRQSAVE( _l, _f ) { \ + spin_lock_irqsave(_l,_f); \ + } + +/** + * Wrapper (macro) for the Linux spin_unlock_irqrestore. On the ARM + * (Integrator) spin_lock() is a nop. + * + * @param _l Pointer to the spinlock. + * @param _f unsigned long for irq flags storage. + */ +#define SPIN_UNLOCK_IRQRESTORE( _l,_f ) {\ + spin_unlock_irqrestore(_l,_f); \ + } + + +/* + * Debugging support vanishes in non-debug builds. + */ + + +/** + * The Debug Level bit-mask variable. + */ +extern uint32_t g_dbg_lvl; +/** + * Set the Debug Level variable. + */ +static inline uint32_t SET_DEBUG_LEVEL( const uint32_t _new ) +{ + uint32_t old = g_dbg_lvl; + g_dbg_lvl = _new; + return old; +} + +/** When debug level has the DBG_CIL bit set, display CIL Debug messages. */ +#define DBG_CIL (0x2) +/** When debug level has the DBG_CILV bit set, display CIL Verbose debug + * messages */ +#define DBG_CILV (0x20) +/** When debug level has the DBG_PCD bit set, display PCD (Device) debug + * messages */ +#define DBG_PCD (0x4) +/** When debug level has the DBG_PCDV set, display PCD (Device) Verbose debug + * messages */ +#define DBG_PCDV (0x40) +/** When debug level has the DBG_HCD bit set, display Host debug messages */ +#define DBG_HCD (0x8) +/** When debug level has the DBG_HCDV bit set, display Verbose Host debug + * messages */ +#define DBG_HCDV (0x80) +/** When debug level has the DBG_HCD_URB bit set, display enqueued URBs in host + * mode. */ +#define DBG_HCD_URB (0x800) + +/** When debug level has any bit set, display debug messages */ +#define DBG_ANY (0xFF) + +/** All debug messages off */ +#define DBG_OFF 0 + +/** Prefix string for DWC_DEBUG print macros. */ +#define USB_DWC "dwc_otg: " + +/** + * Print a debug message when the Global debug level variable contains + * the bit defined in <code>lvl</code>. + * + * @param[in] lvl - Debug level, use one of the DBG_ constants above. + * @param[in] x - like printf + * + * Example:<p> + * <code> + * DWC_DEBUGPL( DBG_ANY, "%s(%p)\n", __func__, _reg_base_addr); + * </code> + * <br> + * results in:<br> + * <code> + * usb-DWC_otg: dwc_otg_cil_init(ca867000) + * </code> + */ +#ifdef DEBUG +# define DWC_DEBUGPL(lvl, x...) do{ if ((lvl)&g_dbg_lvl)printk( KERN_ERR USB_DWC x ); }while(0) +# define DWC_DEBUGP(x...) DWC_DEBUGPL(DBG_ANY, x ) + +# define CHK_DEBUG_LEVEL(level) ((level) & g_dbg_lvl) + +#else + +# define DWC_DEBUGPL(lvl, x...) do{}while(0) +# define DWC_DEBUGP(x...) + +# define CHK_DEBUG_LEVEL(level) (0) + +#endif /*DEBUG*/ + +/** + * Print an Error message. + */ +#define DWC_ERROR(x...) printk( KERN_ERR USB_DWC x ) +/** + * Print a Warning message. + */ +#define DWC_WARN(x...) printk( KERN_WARNING USB_DWC x ) +/** + * Print a notice (normal but significant message). + */ +#define DWC_NOTICE(x...) printk( KERN_NOTICE USB_DWC x ) +/** + * Basic message printing. + */ +#define DWC_PRINT(x...) printk( KERN_INFO USB_DWC x ) + +#endif + diff --git a/drivers/usb/gadget/dwc_otg/ppc4xx_dma.h b/drivers/usb/gadget/dwc_otg/ppc4xx_dma.h index c4a4f2806f6..13043152971 100644 --- a/drivers/usb/gadget/dwc_otg/ppc4xx_dma.h +++ b/drivers/usb/gadget/dwc_otg/ppc4xx_dma.h @@ -32,7 +32,7 @@ #define DCRN_DMASR_BASE 0x120 #endif -#ifdef CONFIG_460EX || defined(CONFIG_APM82181) +#if defined(CONFIG_460EX) || defined(CONFIG_APM82181) #define DCRN_DMA0_BASE 0x200 #define DCRN_DMASR_BASE 0x220 #endif diff --git a/drivers/usb/gadget/dwc_otg/ppc4xx_dma.h.org b/drivers/usb/gadget/dwc_otg/ppc4xx_dma.h.org new file mode 100644 index 00000000000..c4a4f2806f6 --- /dev/null +++ b/drivers/usb/gadget/dwc_otg/ppc4xx_dma.h.org @@ -0,0 +1,620 @@ +/* + * include/asm-ppc/ppc4xx_dma.h + * + * IBM PPC4xx DMA engine library + * + * Copyright 2000-2004 MontaVista Software Inc. + * + * Cleaned up a bit more, Matt Porter <mporter@kernel.crashing.org> + * + * Original code by Armin Kuster <akuster@mvista.com> + * and Pete Popov <ppopov@mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifdef __KERNEL__ +#ifndef __ASMPPC_PPC4xx_DMA_H +#define __ASMPPC_PPC4xx_DMA_H + +#include <linux/types.h> +#include <asm/mmu.h> + +#ifdef CONFIG_405EX +#define DCRN_DMA0_BASE 0x100 +#define DCRN_DMASR_BASE 0x120 +#endif + +#ifdef CONFIG_460EX || defined(CONFIG_APM82181) +#define DCRN_DMA0_BASE 0x200 +#define DCRN_DMASR_BASE 0x220 +#endif + +#ifndef DCRN_DMA0_BASE +#error DMA register not defined for this PPC4xx variant! +#endif + +#define DCRN_DMACR0 (DCRN_DMA0_BASE + 0x0) /* DMA Channel Control 0 */ +#define DCRN_DMACT0 (DCRN_DMA0_BASE + 0x1) /* DMA Count 0 */ +#define DCRN_DMASAH0 (DCRN_DMA0_BASE + 0x2) /* DMA Src Addr High 0 */ +#define DCRN_DMASA0 (DCRN_DMA0_BASE + 0x3) /* DMA Src Addr Low 0 */ +#define DCRN_DMADAH0 (DCRN_DMA0_BASE + 0x4) /* DMA Dest Addr High 0 */ +#define DCRN_DMADA0 (DCRN_DMA0_BASE + 0x5) /* DMA Dest Addr Low 0 */ +#define DCRN_ASGH0 (DCRN_DMA0_BASE + 0x6) /* DMA SG Desc Addr High 0 */ +#define DCRN_ASG0 (DCRN_DMA0_BASE + 0x7) /* DMA SG Desc Addr Low 0 */ + +#define DCRN_DMASR (DCRN_DMASR_BASE + 0x0) /* DMA Status Register */ +#define DCRN_ASGC (DCRN_DMASR_BASE + 0x3) /* DMA Scatter/Gather Command */ +#define DCRN_SLP (DCRN_DMASR_BASE + 0x5) /* DMA Sleep Register */ +#define DCRN_POL (DCRN_DMASR_BASE + 0x6) /* DMA Polarity Register */ + +#undef DEBUG_4xxDMA + +#define MAX_PPC4xx_DMA_CHANNELS 4 + +#define DMA_CH0 0 +#define DMA_CH1 1 +#define DMA_CH2 2 +#define DMA_CH3 3 + +/* + * Function return status codes + * These values are used to indicate whether or not the function + * call was successful, or a bad/invalid parameter was passed. + */ +#define DMA_STATUS_GOOD 0 +#define DMA_STATUS_BAD_CHANNEL 1 +#define DMA_STATUS_BAD_HANDLE 2 +#define DMA_STATUS_BAD_MODE 3 +#define DMA_STATUS_NULL_POINTER 4 +#define DMA_STATUS_OUT_OF_MEMORY 5 +#define DMA_STATUS_SGL_LIST_EMPTY 6 +#define DMA_STATUS_GENERAL_ERROR 7 +#define DMA_STATUS_CHANNEL_NOTFREE 8 + +#define DMA_CHANNEL_BUSY 0x80000000 + +/* + * These indicate status as returned from the DMA Status Register. + */ +#define DMA_STATUS_NO_ERROR 0 +#define DMA_STATUS_CS 1 /* Count Status */ +#define DMA_STATUS_TS 2 /* Transfer Status */ +#define DMA_STATUS_DMA_ERROR 3 /* DMA Error Occurred */ +#define DMA_STATUS_DMA_BUSY 4 /* The channel is busy */ + + +/* + * DMA Channel Control Registers + */ + +/* The 44x devices have 64bit DMA controllers, where the 405EX/r have 32bit */ +#if defined(CONFIG_44x) +#define PPC4xx_DMA_64BIT +#endif + +/* The 44x and 405EX/r come up big-endian with last bit reserved */ +#if defined(CONFIG_44x) || defined(CONFIG_405EX) || defined(CONFIG_405EXr) +#define DMA_CR_OFFSET 1 +#else +#define DMA_CR_OFFSET 0 +#endif + +#define DMA_CE_ENABLE (1<<31) /* DMA Channel Enable */ +#define SET_DMA_CE_ENABLE(x) (((x)&0x1)<<31) +#define GET_DMA_CE_ENABLE(x) (((x)&DMA_CE_ENABLE)>>31) + +#define DMA_CIE_ENABLE (1<<30) /* DMA Channel Interrupt Enable */ +#define SET_DMA_CIE_ENABLE(x) (((x)&0x1)<<30) +#define GET_DMA_CIE_ENABLE(x) (((x)&DMA_CIE_ENABLE)>>30) + +#define DMA_TD (1<<29) +#define SET_DMA_TD(x) (((x)&0x1)<<29) +#define GET_DMA_TD(x) (((x)&DMA_TD)>>29) + +#define DMA_PL (1<<28) /* Peripheral Location */ +#define SET_DMA_PL(x) (((x)&0x1)<<28) +#define GET_DMA_PL(x) (((x)&DMA_PL)>>28) + +#define EXTERNAL_PERIPHERAL 0 +#define INTERNAL_PERIPHERAL 1 + +#define SET_DMA_PW(x) (((x)&0x3)<<(26-DMA_CR_OFFSET)) /* Peripheral Width */ +#define DMA_PW_MASK SET_DMA_PW(3) +#define PW_8 0 +#define PW_16 1 +#define PW_32 2 +#define PW_64 3 +/* FIXME: Add PW_128 support for 440GP DMA block */ +#define GET_DMA_PW(x) (((x)&DMA_PW_MASK)>>(26-DMA_CR_OFFSET)) + +#define DMA_DAI (1<<(25-DMA_CR_OFFSET)) /* Destination Address Increment */ +#define SET_DMA_DAI(x) (((x)&0x1)<<(25-DMA_CR_OFFSET)) + +#define DMA_SAI (1<<(24-DMA_CR_OFFSET)) /* Source Address Increment */ +#define SET_DMA_SAI(x) (((x)&0x1)<<(24-DMA_CR_OFFSET)) + +#define DMA_BEN (1<<(23-DMA_CR_OFFSET)) /* Buffer Enable */ +#define SET_DMA_BEN(x) (((x)&0x1)<<(23-DMA_CR_OFFSET)) + +#define SET_DMA_TM(x) (((x)&0x3)<<(21-DMA_CR_OFFSET)) /* Transfer Mode */ +#define DMA_TM_MASK SET_DMA_TM(3) +#define TM_PERIPHERAL 0 /* Peripheral */ +#define TM_RESERVED 1 /* Reserved */ +#define TM_S_MM 2 /* Memory to Memory */ +#define TM_D_MM 3 /* Device Paced Memory to Memory */ +#define GET_DMA_TM(x) (((x)&DMA_TM_MASK)>>(21-DMA_CR_OFFSET)) + +#define SET_DMA_PSC(x) (((x)&0x3)<<(19-DMA_CR_OFFSET)) /* Peripheral Setup Cycles */ +#define DMA_PSC_MASK SET_DMA_PSC(3) +#define GET_DMA_PSC(x) (((x)&DMA_PSC_MASK)>>(19-DMA_CR_OFFSET)) + +#define SET_DMA_PWC(x) (((x)&0x3F)<<(13-DMA_CR_OFFSET)) /* Peripheral Wait Cycles */ +#define DMA_PWC_MASK SET_DMA_PWC(0x3F) +#define GET_DMA_PWC(x) (((x)&DMA_PWC_MASK)>>(13-DMA_CR_OFFSET)) + +#define SET_DMA_PHC(x) (((x)&0x7)<<(10-DMA_CR_OFFSET)) /* Peripheral Hold Cycles */ +#define DMA_PHC_MASK SET_DMA_PHC(0x7) +#define GET_DMA_PHC(x) (((x)&DMA_PHC_MASK)>>(10-DMA_CR_OFFSET)) + +#define DMA_ETD_OUTPUT (1<<(9-DMA_CR_OFFSET)) /* EOT pin is a TC output */ +#define SET_DMA_ETD(x) (((x)&0x1)<<(9-DMA_CR_OFFSET)) + +#define DMA_TCE_ENABLE (1<<(8-DMA_CR_OFFSET)) +#define SET_DMA_TCE(x) (((x)&0x1)<<(8-DMA_CR_OFFSET)) + +#define DMA_DEC (1<<(2)) /* Address Decrement */ +#define SET_DMA_DEC(x) (((x)&0x1)<<2) +#define GET_DMA_DEC(x) (((x)&DMA_DEC)>>2) + + +/* + * Transfer Modes + * These modes are defined in a way that makes it possible to + * simply "or" in the value in the control register. + */ + +#define DMA_MODE_MM (SET_DMA_TM(TM_S_MM)) /* memory to memory */ + + /* Device-paced memory to memory, */ + /* device is at source address */ +#define DMA_MODE_MM_DEVATSRC (DMA_TD | SET_DMA_TM(TM_D_MM)) + + /* Device-paced memory to memory, */ + /* device is at destination address */ +#define DMA_MODE_MM_DEVATDST (SET_DMA_TM(TM_D_MM)) + +/* 405gp/440gp */ +#define SET_DMA_PREFETCH(x) (((x)&0x3)<<(4-DMA_CR_OFFSET)) /* Memory Read Prefetch */ +#define DMA_PREFETCH_MASK SET_DMA_PREFETCH(3) +#define PREFETCH_1 0 /* Prefetch 1 Double Word */ +#define PREFETCH_2 1 +#define PREFETCH_4 2 +#define GET_DMA_PREFETCH(x) (((x)&DMA_PREFETCH_MASK)>>(4-DMA_CR_OFFSET)) + +#define DMA_PCE (1<<(3-DMA_CR_OFFSET)) /* Parity Check Enable */ +#define SET_DMA_PCE(x) (((x)&0x1)<<(3-DMA_CR_OFFSET)) +#define GET_DMA_PCE(x) (((x)&DMA_PCE)>>(3-DMA_CR_OFFSET)) + +/* stb3x */ + +#define DMA_ECE_ENABLE (1<<5) +#define SET_DMA_ECE(x) (((x)&0x1)<<5) +#define GET_DMA_ECE(x) (((x)&DMA_ECE_ENABLE)>>5) + +#define DMA_TCD_DISABLE (1<<4) +#define SET_DMA_TCD(x) (((x)&0x1)<<4) +#define GET_DMA_TCD(x) (((x)&DMA_TCD_DISABLE)>>4) + +typedef uint32_t sgl_handle_t; + +#ifdef CONFIG_PPC4xx_EDMA + +#define SGL_LIST_SIZE 4096 +#define DMA_PPC4xx_SIZE SGL_LIST_SIZE + +#define SET_DMA_PRIORITY(x) (((x)&0x3)<<(6-DMA_CR_OFFSET)) /* DMA Channel Priority */ +#define DMA_PRIORITY_MASK SET_DMA_PRIORITY(3) +#define PRIORITY_LOW 0 +#define PRIORITY_MID_LOW 1 +#define PRIORITY_MID_HIGH 2 +#define PRIORITY_HIGH 3 +#define GET_DMA_PRIORITY(x) (((x)&DMA_PRIORITY_MASK)>>(6-DMA_CR_OFFSET)) + +/* + * DMA Polarity Configuration Register + */ +#define DMAReq_ActiveLow(chan) (1<<(31-(chan*3))) +#define DMAAck_ActiveLow(chan) (1<<(30-(chan*3))) +#define EOT_ActiveLow(chan) (1<<(29-(chan*3))) /* End of Transfer */ + +/* + * DMA Sleep Mode Register + */ +#define SLEEP_MODE_ENABLE (1<<21) + +/* + * DMA Status Register + */ +#define DMA_CS0 (1<<31) /* Terminal Count has been reached */ +#define DMA_CS1 (1<<30) +#define DMA_CS2 (1<<29) +#define DMA_CS3 (1<<28) + +#define DMA_TS0 (1<<27) /* End of Transfer has been requested */ +#define DMA_TS1 (1<<26) +#define DMA_TS2 (1<<25) +#define DMA_TS3 (1<<24) + +#define DMA_CH0_ERR (1<<23) /* DMA Chanel 0 Error */ +#define DMA_CH1_ERR (1<<22) +#define DMA_CH2_ERR (1<<21) +#define DMA_CH3_ERR (1<<20) + +#define DMA_IN_DMA_REQ0 (1<<19) /* Internal DMA Request is pending */ +#define DMA_IN_DMA_REQ1 (1<<18) +#define DMA_IN_DMA_REQ2 (1<<17) +#define DMA_IN_DMA_REQ3 (1<<16) + +#define DMA_EXT_DMA_REQ0 (1<<15) /* External DMA Request is pending */ +#define DMA_EXT_DMA_REQ1 (1<<14) +#define DMA_EXT_DMA_REQ2 (1<<13) +#define DMA_EXT_DMA_REQ3 (1<<12) + +#define DMA_CH0_BUSY (1<<11) /* DMA Channel 0 Busy */ +#define DMA_CH1_BUSY (1<<10) +#define DMA_CH2_BUSY (1<<9) +#define DMA_CH3_BUSY (1<<8) + +#define DMA_SG0 (1<<7) /* DMA Channel 0 Scatter/Gather in progress */ +#define DMA_SG1 (1<<6) +#define DMA_SG2 (1<<5) +#define DMA_SG3 (1<<4) + +/* DMA Channel Count Register */ +#define DMA_CTC_TCIE (1<<29) /* Terminal Count Interrupt Enable */ +#define DMA_CTC_ETIE (1<<28) /* EOT Interupt Enable */ +#define DMA_CTC_EIE (1<<27) /* Error Interrupt Enable */ +#define DMA_CTC_BTEN (1<<23) /* Burst Enable/Disable bit */ +#define DMA_CTC_BSIZ_MSK (3<<21) /* Mask of the Burst size bits */ +#define DMA_CTC_BSIZ_2 (0) +#define DMA_CTC_BSIZ_4 (1<<21) +#define DMA_CTC_BSIZ_8 (2<<21) +#define DMA_CTC_BSIZ_16 (3<<21) +#define DMA_CTC_TC_MASK 0xFFFFF + +/* + * DMA SG Command Register + */ +#define SSG_ENABLE(chan) (1<<(31-chan)) /* Start Scatter Gather */ +#define SSG_MASK_ENABLE(chan) (1<<(15-chan)) /* Enable writing to SSG0 bit */ + +/* + * DMA Scatter/Gather Descriptor Bit fields + */ +#define SG_LINK (1<<31) /* Link */ +#define SG_TCI_ENABLE (1<<29) /* Enable Terminal Count Interrupt */ +#define SG_ETI_ENABLE (1<<28) /* Enable End of Transfer Interrupt */ +#define SG_ERI_ENABLE (1<<27) /* Enable Error Interrupt */ +#define SG_COUNT_MASK 0xFFFF /* Count Field */ + +#define SET_DMA_CONTROL \ + (SET_DMA_CIE_ENABLE(p_init->int_enable) | /* interrupt enable */ \ + SET_DMA_BEN(p_init->buffer_enable) | /* buffer enable */\ + SET_DMA_ETD(p_init->etd_output) | /* end of transfer pin */ \ + SET_DMA_TCE(p_init->tce_enable) | /* terminal count enable */ \ + SET_DMA_PL(p_init->pl) | /* peripheral location */ \ + SET_DMA_DAI(p_init->dai) | /* dest addr increment */ \ + SET_DMA_SAI(p_init->sai) | /* src addr increment */ \ + SET_DMA_PRIORITY(p_init->cp) | /* channel priority */ \ + SET_DMA_PW(p_init->pwidth) | /* peripheral/bus width */ \ + SET_DMA_PSC(p_init->psc) | /* peripheral setup cycles */ \ + SET_DMA_PWC(p_init->pwc) | /* peripheral wait cycles */ \ + SET_DMA_PHC(p_init->phc) | /* peripheral hold cycles */ \ + SET_DMA_PREFETCH(p_init->pf) /* read prefetch */) + +#define GET_DMA_POLARITY(chan) (DMAReq_ActiveLow(chan) | DMAAck_ActiveLow(chan) | EOT_ActiveLow(chan)) + +#elif defined(CONFIG_STB03xxx) /* stb03xxx */ + +#define DMA_PPC4xx_SIZE 4096 + +/* + * DMA Status Register + */ + +#define SET_DMA_PRIORITY(x) (((x)&0x00800001)) /* DMA Channel Priority */ +#define DMA_PRIORITY_MASK 0x00800001 +#define PRIORITY_LOW 0x00000000 +#define PRIORITY_MID_LOW 0x00000001 +#define PRIORITY_MID_HIGH 0x00800000 +#define PRIORITY_HIGH 0x00800001 +#define GET_DMA_PRIORITY(x) (((((x)&DMA_PRIORITY_MASK) &0x00800000) >> 22 ) | (((x)&DMA_PRIORITY_MASK) &0x00000001)) + +#define DMA_CS0 (1<<31) /* Terminal Count has been reached */ +#define DMA_CS1 (1<<30) +#define DMA_CS2 (1<<29) +#define DMA_CS3 (1<<28) + +#define DMA_TS0 (1<<27) /* End of Transfer has been requested */ +#define DMA_TS1 (1<<26) +#define DMA_TS2 (1<<25) +#define DMA_TS3 (1<<24) + +#define DMA_CH0_ERR (1<<23) /* DMA Chanel 0 Error */ +#define DMA_CH1_ERR (1<<22) +#define DMA_CH2_ERR (1<<21) +#define DMA_CH3_ERR (1<<20) + +#define DMA_CT0 (1<<19) /* Chained transfere */ + +#define DMA_IN_DMA_REQ0 (1<<18) /* Internal DMA Request is pending */ +#define DMA_IN_DMA_REQ1 (1<<17) +#define DMA_IN_DMA_REQ2 (1<<16) +#define DMA_IN_DMA_REQ3 (1<<15) + +#define DMA_EXT_DMA_REQ0 (1<<14) /* External DMA Request is pending */ +#define DMA_EXT_DMA_REQ1 (1<<13) +#define DMA_EXT_DMA_REQ2 (1<<12) +#define DMA_EXT_DMA_REQ3 (1<<11) + +#define DMA_CH0_BUSY (1<<10) /* DMA Channel 0 Busy */ +#define DMA_CH1_BUSY (1<<9) +#define DMA_CH2_BUSY (1<<8) +#define DMA_CH3_BUSY (1<<7) + +#define DMA_CT1 (1<<6) /* Chained transfere */ +#define DMA_CT2 (1<<5) +#define DMA_CT3 (1<<4) + +#define DMA_CH_ENABLE (1<<7) +#define SET_DMA_CH(x) (((x)&0x1)<<7) +#define GET_DMA_CH(x) (((x)&DMA_CH_ENABLE)>>7) + +/* STBx25xxx dma unique */ +/* enable device port on a dma channel + * example ext 0 on dma 1 + */ + +#define SSP0_RECV 15 +#define SSP0_XMIT 14 +#define EXT_DMA_0 12 +#define SC1_XMIT 11 +#define SC1_RECV 10 +#define EXT_DMA_2 9 +#define EXT_DMA_3 8 +#define SERIAL2_XMIT 7 +#define SERIAL2_RECV 6 +#define SC0_XMIT 5 +#define SC0_RECV 4 +#define SERIAL1_XMIT 3 +#define SERIAL1_RECV 2 +#define SERIAL0_XMIT 1 +#define SERIAL0_RECV 0 + +#define DMA_CHAN_0 1 +#define DMA_CHAN_1 2 +#define DMA_CHAN_2 3 +#define DMA_CHAN_3 4 + +/* end STBx25xx */ + +/* + * Bit 30 must be one for Redwoods, otherwise transfers may receive errors. + */ +#define DMA_CR_MB0 0x2 + +#define SET_DMA_CONTROL \ + (SET_DMA_CIE_ENABLE(p_init->int_enable) | /* interrupt enable */ \ + SET_DMA_ETD(p_init->etd_output) | /* end of transfer pin */ \ + SET_DMA_TCE(p_init->tce_enable) | /* terminal count enable */ \ + SET_DMA_PL(p_init->pl) | /* peripheral location */ \ + SET_DMA_DAI(p_init->dai) | /* dest addr increment */ \ + SET_DMA_SAI(p_init->sai) | /* src addr increment */ \ + SET_DMA_PRIORITY(p_init->cp) | /* channel priority */ \ + SET_DMA_PW(p_init->pwidth) | /* peripheral/bus width */ \ + SET_DMA_PSC(p_init->psc) | /* peripheral setup cycles */ \ + SET_DMA_PWC(p_init->pwc) | /* peripheral wait cycles */ \ + SET_DMA_PHC(p_init->phc) | /* peripheral hold cycles */ \ + SET_DMA_TCD(p_init->tcd_disable) | /* TC chain mode disable */ \ + SET_DMA_ECE(p_init->ece_enable) | /* ECE chanin mode enable */ \ + SET_DMA_CH(p_init->ch_enable) | /* Chain enable */ \ + DMA_CR_MB0 /* must be one */) + +#define GET_DMA_POLARITY(chan) chan + +#endif + +typedef struct { + unsigned short in_use; /* set when channel is being used, clr when + * available. + */ + /* + * Valid polarity settings: + * DMAReq_ActiveLow(n) + * DMAAck_ActiveLow(n) + * EOT_ActiveLow(n) + * + * n is 0 to max dma chans + */ + unsigned int polarity; + + char buffer_enable; /* Boolean: buffer enable */ + char tce_enable; /* Boolean: terminal count enable */ + char etd_output; /* Boolean: eot pin is a tc output */ + char pce; /* Boolean: parity check enable */ + + /* + * Peripheral location: + * INTERNAL_PERIPHERAL (UART0 on the 405GP) + * EXTERNAL_PERIPHERAL + */ + char pl; /* internal/external peripheral */ + + /* + * Valid pwidth settings: + * PW_8 + * PW_16 + * PW_32 + * PW_64 + */ + unsigned int pwidth; + + char dai; /* Boolean: dst address increment */ + char sai; /* Boolean: src address increment */ + + /* + * Valid psc settings: 0-3 + */ + unsigned int psc; /* Peripheral Setup Cycles */ + + /* + * Valid pwc settings: + * 0-63 + */ + unsigned int pwc; /* Peripheral Wait Cycles */ + + /* + * Valid phc settings: + * 0-7 + */ + unsigned int phc; /* Peripheral Hold Cycles */ + + /* + * Valid cp (channel priority) settings: + * PRIORITY_LOW + * PRIORITY_MID_LOW + * PRIORITY_MID_HIGH + * PRIORITY_HIGH + */ + unsigned int cp; /* channel priority */ + + /* + * Valid pf (memory read prefetch) settings: + * + * PREFETCH_1 + * PREFETCH_2 + * PREFETCH_4 + */ + unsigned int pf; /* memory read prefetch */ + + /* + * Boolean: channel interrupt enable + * NOTE: for sgl transfers, only the last descriptor will be setup to + * interrupt. + */ + char int_enable; + + char shift; /* easy access to byte_count shift, based on */ + /* the width of the channel */ + + uint32_t control; /* channel control word */ + + /* These variabled are used ONLY in single dma transfers */ + unsigned int mode; /* transfer mode */ + phys_addr_t addr; + char ce; /* channel enable */ +#ifdef CONFIG_STB03xxx + char ch_enable; + char tcd_disable; + char ece_enable; + char td; /* transfer direction */ +#endif + + char int_on_final_sg;/* for scatter/gather - only interrupt on last sg */ +} ppc_dma_ch_t; + +/* + * PPC44x DMA implementations have a slightly different + * descriptor layout. Probably moved about due to the + * change to 64-bit addresses and link pointer. I don't + * know why they didn't just leave control_count after + * the dst_addr. + */ +#ifdef PPC4xx_DMA_64BIT +typedef struct { + uint32_t control; + uint32_t control_count; + phys_addr_t src_addr; + phys_addr_t dst_addr; + phys_addr_t next; +} ppc_sgl_t; +#else +typedef struct { + uint32_t control; + phys_addr_t src_addr; + phys_addr_t dst_addr; + uint32_t control_count; + uint32_t next; +} ppc_sgl_t; +#endif + +typedef struct { + unsigned int dmanr; + uint32_t control; /* channel ctrl word; loaded from each descrptr */ + uint32_t sgl_control; /* LK, TCI, ETI, and ERI bits in sgl descriptor */ + dma_addr_t dma_addr; /* dma (physical) address of this list */ + ppc_sgl_t *phead; + dma_addr_t phead_dma; + ppc_sgl_t *ptail; + dma_addr_t ptail_dma; +} sgl_list_info_t; + +typedef struct { + phys_addr_t *src_addr; + phys_addr_t *dst_addr; + phys_addr_t dma_src_addr; + phys_addr_t dma_dst_addr; +} pci_alloc_desc_t; + +extern ppc_dma_ch_t dma_channels[]; + +/* + * The DMA API are in ppc4xx_dma.c and ppc4xx_sgdma.c + */ +extern int ppc4xx_init_dma_channel(unsigned int, ppc_dma_ch_t *); +extern int ppc4xx_get_channel_config(unsigned int, ppc_dma_ch_t *); +extern int ppc4xx_set_channel_priority(unsigned int, unsigned int); +extern unsigned int ppc4xx_get_peripheral_width(unsigned int); +extern void ppc4xx_set_sg_addr(int, phys_addr_t); +extern int ppc4xx_add_dma_sgl(sgl_handle_t, phys_addr_t, phys_addr_t, unsigned int); +extern void ppc4xx_enable_dma_sgl(sgl_handle_t); +extern void ppc4xx_disable_dma_sgl(sgl_handle_t); +extern int ppc4xx_get_dma_sgl_residue(sgl_handle_t, phys_addr_t *, phys_addr_t *); +extern int ppc4xx_delete_dma_sgl_element(sgl_handle_t, phys_addr_t *, phys_addr_t *); +extern int ppc4xx_alloc_dma_handle(sgl_handle_t *, unsigned int, unsigned int); +extern void ppc4xx_free_dma_handle(sgl_handle_t); +extern int ppc4xx_get_dma_status(void); +extern int ppc4xx_enable_burst(unsigned int); +extern int ppc4xx_disable_burst(unsigned int); +extern int ppc4xx_set_burst_size(unsigned int, unsigned int); +extern void ppc4xx_set_src_addr(int dmanr, phys_addr_t src_addr); +extern void ppc4xx_set_dst_addr(int dmanr, phys_addr_t dst_addr); +extern void ppc4xx_enable_dma(unsigned int dmanr); +extern void ppc4xx_disable_dma(unsigned int dmanr); +extern void ppc4xx_set_dma_count(unsigned int dmanr, unsigned int count); +extern int ppc4xx_get_dma_residue(unsigned int dmanr); +extern void ppc4xx_set_dma_addr2(unsigned int dmanr, phys_addr_t src_dma_addr, + phys_addr_t dst_dma_addr); +extern int ppc4xx_enable_dma_interrupt(unsigned int dmanr); +extern int ppc4xx_disable_dma_interrupt(unsigned int dmanr); +extern int ppc4xx_clr_dma_status(unsigned int dmanr); +extern int ppc4xx_map_dma_port(unsigned int dmanr, unsigned int ocp_dma,short dma_chan); +extern int ppc4xx_disable_dma_port(unsigned int dmanr, unsigned int ocp_dma,short dma_chan); +extern int ppc4xx_set_dma_mode(unsigned int dmanr, unsigned int mode); + +/* These are in kernel/dma.c: */ + +/* reserve a DMA channel */ +extern int request_dma(unsigned int dmanr, const char *device_id); +/* release it again */ +extern void free_dma(unsigned int dmanr); +#endif +#endif /* __KERNEL__ */ diff --git a/drivers/usb/gadget/dwc_otg/sdiff/dwc_otg_hcd.c.sdiff b/drivers/usb/gadget/dwc_otg/sdiff/dwc_otg_hcd.c.sdiff new file mode 100644 index 00000000000..e0e9208285d --- /dev/null +++ b/drivers/usb/gadget/dwc_otg/sdiff/dwc_otg_hcd.c.sdiff @@ -0,0 +1,2944 @@ +/* ========================================================== /* ========================================================== + * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers + * $Revision: #16 $ * $Revision: #16 $ + * $Date: 2006/12/05 $ * $Date: 2006/12/05 $ + * $Change: 762293 $ * $Change: 762293 $ + * * + * Synopsys HS OTG Linux Software Driver and documentation (h * Synopsys HS OTG Linux Software Driver and documentation (h + * "Software") is an Unsupported proprietary work of Synopsys * "Software") is an Unsupported proprietary work of Synopsys + * otherwise expressly agreed to in writing between Synopsys * otherwise expressly agreed to in writing between Synopsys + * * + * The Software IS NOT an item of Licensed Software or Licens * The Software IS NOT an item of Licensed Software or Licens + * any End User Software License Agreement or Agreement for L * any End User Software License Agreement or Agreement for L + * with Synopsys or any supplement thereto. You are permitted * with Synopsys or any supplement thereto. You are permitted + * redistribute this Software in source and binary forms, wit * redistribute this Software in source and binary forms, wit + * modification, provided that redistributions of source code * modification, provided that redistributions of source code + * notice. You may not view, use, disclose, copy or distribut * notice. You may not view, use, disclose, copy or distribut + * any information contained herein except pursuant to this l * any information contained herein except pursuant to this l + * Synopsys. If you do not agree with this notice, including * Synopsys. If you do not agree with this notice, including + * below, then you are not authorized to use the Software. * below, then you are not authorized to use the Software. + * * + * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON A * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON A + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PA * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PA + * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABL * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABL + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTER * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARI * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARI + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE PO * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE PO + * DAMAGE. * DAMAGE. + * ========================================================== * ========================================================== + +#ifndef CONFIG_DWC_DEVICE_ONLY | #ifndef DWC_DEVICE_ONLY + +/** /** + * @file * @file + * * + * This file contains the implementation of the HCD. In Linux * This file contains the implementation of the HCD. In Linux + * implements the hc_driver API. * implements the hc_driver API. + */ */ +#include <linux/kernel.h> #include <linux/kernel.h> +#include <linux/module.h> #include <linux/module.h> +#include <linux/moduleparam.h> #include <linux/moduleparam.h> +#include <linux/init.h> #include <linux/init.h> +#include <linux/device.h> #include <linux/device.h> +#include <linux/errno.h> #include <linux/errno.h> +#include <linux/list.h> #include <linux/list.h> +#include <linux/interrupt.h> #include <linux/interrupt.h> +#include <linux/string.h> #include <linux/string.h> +#include <linux/dma-mapping.h> #include <linux/dma-mapping.h> + +#include "dwc_otg_driver.h" #include "dwc_otg_driver.h" +#include "dwc_otg_hcd.h" #include "dwc_otg_hcd.h" +#include "dwc_otg_regs.h" #include "dwc_otg_regs.h" +extern atomic_t release_later; extern atomic_t release_later; + +static u64 dma_mask = DMA_BIT_MASK(32); static u64 dma_mask = DMA_BIT_MASK(32); + +static const char dwc_otg_hcd_name[] = "dwc_otg_hcd"; static const char dwc_otg_hcd_name[] = "dwc_otg_hcd"; + +static int dwc_otg_hcd_suspend(struct usb_hcd *hcd) static int dwc_otg_hcd_suspend(struct usb_hcd *hcd) +{ { + /* FIXME: Write code to right suspend processing */ /* FIXME: Write code to right suspend processing */ + return 0; return 0; +} } + +static int dwc_otg_hcd_resume(struct usb_hcd *hcd) static int dwc_otg_hcd_resume(struct usb_hcd *hcd) +{ { + /* FIXME: Write code to right resume processing */ /* FIXME: Write code to right resume processing */ + return 0; return 0; +} } + +static const struct hc_driver dwc_otg_hc_driver = static const struct hc_driver dwc_otg_hc_driver = +{ { + .description = dwc_otg_hcd_name, .description = dwc_otg_hcd_name, + .product_desc = "DWC OTG Controller", .product_desc = "DWC OTG Controller", + .hcd_priv_size = sizeof(dwc_otg_hcd_t), .hcd_priv_size = sizeof(dwc_otg_hcd_t), + .irq = dwc_otg_hcd_irq, .irq = dwc_otg_hcd_irq, + .flags = HCD_MEMORY | HCD_USB2, .flags = HCD_MEMORY | HCD_USB2, + //.reset = | //.reset = + .start = dwc_otg_hcd_start, | .start = dwc_otg_hcd_start, +#ifdef CONFIG_PM #ifdef CONFIG_PM + .bus_suspend = dwc_otg_hcd_suspend, .bus_suspend = dwc_otg_hcd_suspend, + .bus_resume = dwc_otg_hcd_resume, | .bus_resume = dwc_otg_hcd_resume, +#endif #endif + .stop = dwc_otg_hcd_stop, | .stop = dwc_otg_hcd_stop, + .urb_enqueue = dwc_otg_hcd_urb_enqueue, .urb_enqueue = dwc_otg_hcd_urb_enqueue, + .urb_dequeue = dwc_otg_hcd_urb_dequeue, .urb_dequeue = dwc_otg_hcd_urb_dequeue, + .endpoint_disable = dwc_otg_hcd_endpoint_disable, .endpoint_disable = dwc_otg_hcd_endpoint_disable, + .get_frame_number = dwc_otg_hcd_get_frame_number, .get_frame_number = dwc_otg_hcd_get_frame_number, + .hub_status_data = dwc_otg_hcd_hub_status_data, .hub_status_data = dwc_otg_hcd_hub_status_data, + .hub_control = dwc_otg_hcd_hub_control, .hub_control = dwc_otg_hcd_hub_control, + //.hub_suspend = | //.hub_suspend = + //.hub_resume = | //.hub_resume = +}; }; + + +/** /** + * Work queue function for starting the HCD when A-Cable is c * Work queue function for starting the HCD when A-Cable is c + * The dwc_otg_hcd_start() must be called in a process contex * The dwc_otg_hcd_start() must be called in a process contex + */ */ +static void hcd_start_func(struct work_struct *work) static void hcd_start_func(struct work_struct *work) +{ { + struct dwc_otg_hcd *priv = struct dwc_otg_hcd *priv = + container_of(work, struct dwc_otg_hcd, start_ container_of(work, struct dwc_otg_hcd, start_ + struct usb_hcd *usb_hcd = (struct usb_hcd *)priv->_p; struct usb_hcd *usb_hcd = (struct usb_hcd *)priv->_p; + DWC_DEBUGPL(DBG_HCDV, "%s() %p\n", __func__, usb_hcd) DWC_DEBUGPL(DBG_HCDV, "%s() %p\n", __func__, usb_hcd) + if (usb_hcd) { if (usb_hcd) { + dwc_otg_hcd_start(usb_hcd); dwc_otg_hcd_start(usb_hcd); + } } +} } + + +/** /** + * HCD Callback function for starting the HCD when A-Cable is * HCD Callback function for starting the HCD when A-Cable is + * connected. * connected. + * * + * @param _p void pointer to the <code>struct usb_hcd</code> * @param _p void pointer to the <code>struct usb_hcd</code> + */ */ +static int32_t dwc_otg_hcd_start_cb(void *_p) static int32_t dwc_otg_hcd_start_cb(void *_p) +{ { + dwc_otg_hcd_t * dwc_otg_hcd = hcd_to_dwc_otg_hcd(_p); dwc_otg_hcd_t * dwc_otg_hcd = hcd_to_dwc_otg_hcd(_p); + dwc_otg_core_if_t * core_if = dwc_otg_hcd->core_if; dwc_otg_core_if_t * core_if = dwc_otg_hcd->core_if; + hprt0_data_t hprt0; hprt0_data_t hprt0; + if (core_if->op_state == B_HOST) { if (core_if->op_state == B_HOST) { + /* /* + * Reset the port. During a HNP mode switch the * Reset the port. During a HNP mode switch the + * needs to occur within 1ms and have a duration * needs to occur within 1ms and have a duration + * least 50ms. * least 50ms. + */ */ + hprt0.d32 = dwc_otg_read_hprt0(core_if); hprt0.d32 = dwc_otg_read_hprt0(core_if); + hprt0.b.prtrst = 1; hprt0.b.prtrst = 1; + dwc_write_reg32(core_if->host_if->hprt0, hprt dwc_write_reg32(core_if->host_if->hprt0, hprt + ((struct usb_hcd *)_p)->self.is_b_host = 1; ((struct usb_hcd *)_p)->self.is_b_host = 1; + } else { } else { + ((struct usb_hcd *)_p)->self.is_b_host = 0; ((struct usb_hcd *)_p)->self.is_b_host = 0; + } } + /* Need to start the HCD in a non-interrupt context. /* Need to start the HCD in a non-interrupt context. + INIT_WORK(&dwc_otg_hcd->start_work, hcd_start_func); INIT_WORK(&dwc_otg_hcd->start_work, hcd_start_func); + dwc_otg_hcd->_p = _p; dwc_otg_hcd->_p = _p; + schedule_work(&dwc_otg_hcd->start_work); schedule_work(&dwc_otg_hcd->start_work); + return 1; return 1; +} } + + +/** /** + * HCD Callback function for stopping the HCD. * HCD Callback function for stopping the HCD. + * * + * @param _p void pointer to the <code>struct usb_hcd</code> * @param _p void pointer to the <code>struct usb_hcd</code> + */ */ +static int32_t dwc_otg_hcd_stop_cb(void *_p) static int32_t dwc_otg_hcd_stop_cb(void *_p) +{ { + struct usb_hcd *usb_hcd = (struct usb_hcd *)_p; struct usb_hcd *usb_hcd = (struct usb_hcd *)_p; + DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, _p); DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, _p); + dwc_otg_hcd_stop(usb_hcd); dwc_otg_hcd_stop(usb_hcd); + return 1; return 1; +} } +static void del_xfer_timers(dwc_otg_hcd_t * _hcd) static void del_xfer_timers(dwc_otg_hcd_t * _hcd) +{ { + +#ifdef CONFIG_DWC_DEBUG | #ifdef DEBUG + int i; int i; + int num_channels = _hcd->core_if->core_params->host_c int num_channels = _hcd->core_if->core_params->host_c + for (i = 0; i < num_channels; i++) { for (i = 0; i < num_channels; i++) { + del_timer(&_hcd->core_if->hc_xfer_timer[i]); del_timer(&_hcd->core_if->hc_xfer_timer[i]); + } } + +#endif /* */ #endif /* */ +} } +static void del_timers(dwc_otg_hcd_t * _hcd) static void del_timers(dwc_otg_hcd_t * _hcd) +{ { + del_xfer_timers(_hcd); del_xfer_timers(_hcd); + del_timer(&_hcd->conn_timer); del_timer(&_hcd->conn_timer); +} } + +/** /** + * Processes all the URBs in a single list of QHs. Completes * Processes all the URBs in a single list of QHs. Completes + * -ETIMEDOUT and frees the QTD. * -ETIMEDOUT and frees the QTD. + */ */ +static void kill_urbs_in_qh_list(dwc_otg_hcd_t * _hcd, static void kill_urbs_in_qh_list(dwc_otg_hcd_t * _hcd, + struct list_head *_qh_list) struct list_head *_qh_list) +{ { + struct list_head *qh_item; struct list_head *qh_item; + dwc_otg_qh_t * qh; dwc_otg_qh_t * qh; + struct list_head *qtd_item; struct list_head *qtd_item; + dwc_otg_qtd_t * qtd; dwc_otg_qtd_t * qtd; + list_for_each(qh_item, _qh_list) { list_for_each(qh_item, _qh_list) { + qh = list_entry(qh_item, dwc_otg_qh_t, qh_lis qh = list_entry(qh_item, dwc_otg_qh_t, qh_lis + for (qtd_item = qh->qtd_list.next; qtd_item ! for (qtd_item = qh->qtd_list.next; qtd_item ! + qtd_item = qh->qtd_list.next) { qtd_item = qh->qtd_list.next) { + qtd = list_entry(qtd_item, dwc_otg_qt qtd = list_entry(qtd_item, dwc_otg_qt + if (qtd->urb != NULL) { if (qtd->urb != NULL) { + dwc_otg_hcd_complete_urb(_hcd dwc_otg_hcd_complete_urb(_hcd + } } + dwc_otg_hcd_qtd_remove_and_free(qtd); dwc_otg_hcd_qtd_remove_and_free(qtd); + } } + } } +} } + +/** /** + * Responds with an error status of ETIMEDOUT to all URBs in * Responds with an error status of ETIMEDOUT to all URBs in + * and periodic schedules. The QTD associated with each URB i * and periodic schedules. The QTD associated with each URB i + * the schedule and freed. This function may be called when a * the schedule and freed. This function may be called when a + * detected or when the HCD is being stopped. * detected or when the HCD is being stopped. + */ */ +static void kill_all_urbs(dwc_otg_hcd_t * _hcd) static void kill_all_urbs(dwc_otg_hcd_t * _hcd) +{ { + kill_urbs_in_qh_list(_hcd, &_hcd->non_periodic_sched_ kill_urbs_in_qh_list(_hcd, &_hcd->non_periodic_sched_ + kill_urbs_in_qh_list(_hcd, &_hcd->non_periodic_sched_ kill_urbs_in_qh_list(_hcd, &_hcd->non_periodic_sched_ + kill_urbs_in_qh_list(_hcd, &_hcd->non_periodic_sched_ kill_urbs_in_qh_list(_hcd, &_hcd->non_periodic_sched_ + kill_urbs_in_qh_list(_hcd, &_hcd->periodic_sched_inac kill_urbs_in_qh_list(_hcd, &_hcd->periodic_sched_inac + kill_urbs_in_qh_list(_hcd, &_hcd->periodic_sched_read kill_urbs_in_qh_list(_hcd, &_hcd->periodic_sched_read + kill_urbs_in_qh_list(_hcd, &_hcd->periodic_sched_assi kill_urbs_in_qh_list(_hcd, &_hcd->periodic_sched_assi + kill_urbs_in_qh_list(_hcd, &_hcd->periodic_sched_queu kill_urbs_in_qh_list(_hcd, &_hcd->periodic_sched_queu +} } + +/** /** + * HCD Callback function for disconnect of the HCD. * HCD Callback function for disconnect of the HCD. + * * + * @param _p void pointer to the <code>struct usb_hcd</code> * @param _p void pointer to the <code>struct usb_hcd</code> + */ */ +static int32_t dwc_otg_hcd_disconnect_cb(void *_p) static int32_t dwc_otg_hcd_disconnect_cb(void *_p) +{ { + gintsts_data_t intr; gintsts_data_t intr; + dwc_otg_hcd_t * dwc_otg_hcd = hcd_to_dwc_otg_hcd(_p); dwc_otg_hcd_t * dwc_otg_hcd = hcd_to_dwc_otg_hcd(_p); + + //DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, _p); //DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, _p); + + /* /* + * Set status flags for the hub driver. * Set status flags for the hub driver. + */ */ + dwc_otg_hcd->flags.b.port_connect_status_change = 1; dwc_otg_hcd->flags.b.port_connect_status_change = 1; + dwc_otg_hcd->flags.b.port_connect_status = 0; dwc_otg_hcd->flags.b.port_connect_status = 0; + + /* /* + * Shutdown any transfers in process by clearing the Tx F * Shutdown any transfers in process by clearing the Tx F + * interrupt mask and status bits and disabling subsequen * interrupt mask and status bits and disabling subsequen + * channel interrupts. * channel interrupts. + */ */ + intr.d32 = 0; intr.d32 = 0; + intr.b.nptxfempty = 1; intr.b.nptxfempty = 1; + intr.b.ptxfempty = 1; intr.b.ptxfempty = 1; + intr.b.hcintr = 1; intr.b.hcintr = 1; + dwc_modify_reg32(&dwc_otg_hcd->core_if->core_global_r dwc_modify_reg32(&dwc_otg_hcd->core_if->core_global_r + intr.d32, 0); intr.d32, 0); + dwc_modify_reg32(&dwc_otg_hcd->core_if->core_global_r dwc_modify_reg32(&dwc_otg_hcd->core_if->core_global_r + intr.d32, 0); intr.d32, 0); + del_timers(dwc_otg_hcd); del_timers(dwc_otg_hcd); + + /* /* + * Turn off the vbus power only if the core has transitio * Turn off the vbus power only if the core has transitio + * mode. If still in host mode, need to keep power on to * mode. If still in host mode, need to keep power on to + * reconnection. * reconnection. + */ */ + if (dwc_otg_is_device_mode(dwc_otg_hcd->core_if)) { if (dwc_otg_is_device_mode(dwc_otg_hcd->core_if)) { + if (dwc_otg_hcd->core_if->op_state != A_SUSPE if (dwc_otg_hcd->core_if->op_state != A_SUSPE + hprt0_data_t hprt0 = {.d32 = 0}; hprt0_data_t hprt0 = {.d32 = 0}; + DWC_PRINT("Disconnect: PortPower off\ DWC_PRINT("Disconnect: PortPower off\ + hprt0.b.prtpwr = 0; hprt0.b.prtpwr = 0; + dwc_write_reg32(dwc_otg_hcd->core_if- dwc_write_reg32(dwc_otg_hcd->core_if- + hprt0.d32); hprt0.d32); + } } + dwc_otg_disable_host_interrupts(dwc_otg_hcd-> dwc_otg_disable_host_interrupts(dwc_otg_hcd-> + } } + + /* Respond with an error status to all URBs in the schedu /* Respond with an error status to all URBs in the schedu + kill_all_urbs(dwc_otg_hcd); kill_all_urbs(dwc_otg_hcd); + if (dwc_otg_is_host_mode(dwc_otg_hcd->core_if)) { if (dwc_otg_is_host_mode(dwc_otg_hcd->core_if)) { + /* Clean up any host channels that were in use. * /* Clean up any host channels that were in use. * + int num_channels; int num_channels; + int i; int i; + dwc_hc_t * channel; dwc_hc_t * channel; + dwc_otg_hc_regs_t * hc_regs; dwc_otg_hc_regs_t * hc_regs; + hcchar_data_t hcchar; hcchar_data_t hcchar; + num_channels = dwc_otg_hcd->core_if->core_par num_channels = dwc_otg_hcd->core_if->core_par + if (!dwc_otg_hcd->core_if->dma_enable) { if (!dwc_otg_hcd->core_if->dma_enable) { + /* Flush out any channel requests in slav /* Flush out any channel requests in slav + for (i = 0; i < num_channels; i++) { for (i = 0; i < num_channels; i++) { + channel = dwc_otg_hcd->hc_ptr channel = dwc_otg_hcd->hc_ptr + if (list_empty(&channel->hc_l if (list_empty(&channel->hc_l + hc_regs = dwc_otg_hcd hc_regs = dwc_otg_hcd + hcchar.d32 = dwc_read hcchar.d32 = dwc_read + if (hcchar.b.chen) { if (hcchar.b.chen) { + hcchar.b.chen hcchar.b.chen + hcchar.b.chdi hcchar.b.chdi + hcchar.b.epdi hcchar.b.epdi + dwc_write_reg dwc_write_reg + } } + } } + } } + } } + for (i = 0; i < num_channels; i++) { for (i = 0; i < num_channels; i++) { + channel = dwc_otg_hcd->hc_ptr_array[i channel = dwc_otg_hcd->hc_ptr_array[i + if (list_empty(&channel->hc_list_entr if (list_empty(&channel->hc_list_entr + hc_regs = dwc_otg_hcd->core_i hc_regs = dwc_otg_hcd->core_i + hcchar.d32 = dwc_read_reg32(& hcchar.d32 = dwc_read_reg32(& + if (hcchar.b.chen) { if (hcchar.b.chen) { + /* Halt the channel. */ /* Halt the channel. */ + hcchar.b.chdis = 1; hcchar.b.chdis = 1; + dwc_write_reg32(&hc_r dwc_write_reg32(&hc_r + } } + dwc_otg_hc_cleanup(dwc_otg_hc dwc_otg_hc_cleanup(dwc_otg_hc + list_add_tail(&channel->hc_li list_add_tail(&channel->hc_li + &dwc_otg_hcd-> &dwc_otg_hcd-> + } } + } } + } } + + /* A disconnect will end the session so the B-Device is n /* A disconnect will end the session so the B-Device is n + * longer a B-host. */ * longer a B-host. */ + ((struct usb_hcd *)_p)->self.is_b_host = 0; ((struct usb_hcd *)_p)->self.is_b_host = 0; + return 1; return 1; +} } + +/** /** + * Connection timeout function. An OTG host is required to d * Connection timeout function. An OTG host is required to d + * message if the device does not connect within 10 seconds. * message if the device does not connect within 10 seconds. + */ */ +void dwc_otg_hcd_connect_timeout(unsigned long _ptr) void dwc_otg_hcd_connect_timeout(unsigned long _ptr) +{ { + DWC_DEBUGPL(DBG_HCDV, "%s(%x)\n", __func__, (int)_ptr DWC_DEBUGPL(DBG_HCDV, "%s(%x)\n", __func__, (int)_ptr + DWC_PRINT("Connect Timeout\n"); DWC_PRINT("Connect Timeout\n"); + DWC_ERROR("Device Not Connected/Responding\n"); DWC_ERROR("Device Not Connected/Responding\n"); +} } + +/** /** + * Start the connection timer. An OTG host is required to di * Start the connection timer. An OTG host is required to di + * message if the device does not connect within 10 seconds. * message if the device does not connect within 10 seconds. + * timer is deleted if a port connect interrupt occurs before * timer is deleted if a port connect interrupt occurs before + * timer expires. * timer expires. + */ */ +static void dwc_otg_hcd_start_connect_timer(dwc_otg_hcd_t * _ static void dwc_otg_hcd_start_connect_timer(dwc_otg_hcd_t * _ +{ { + init_timer(&_hcd->conn_timer); init_timer(&_hcd->conn_timer); + _hcd->conn_timer.function = dwc_otg_hcd_connect_timeo _hcd->conn_timer.function = dwc_otg_hcd_connect_timeo + _hcd->conn_timer.data = (unsigned long)0; _hcd->conn_timer.data = (unsigned long)0; + _hcd->conn_timer.expires = jiffies + (HZ * 10); _hcd->conn_timer.expires = jiffies + (HZ * 10); + add_timer(&_hcd->conn_timer); add_timer(&_hcd->conn_timer); +} } + +/** /** + * HCD Callback function for disconnect of the HCD. * HCD Callback function for disconnect of the HCD. + * * + * @param _p void pointer to the <code>struct usb_hcd</code> * @param _p void pointer to the <code>struct usb_hcd</code> + */ */ +static int32_t dwc_otg_hcd_session_start_cb(void *_p) static int32_t dwc_otg_hcd_session_start_cb(void *_p) +{ { + dwc_otg_hcd_t * dwc_otg_hcd = hcd_to_dwc_otg_hcd(_p); dwc_otg_hcd_t * dwc_otg_hcd = hcd_to_dwc_otg_hcd(_p); + DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, _p); DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, _p); + dwc_otg_hcd_start_connect_timer(dwc_otg_hcd); dwc_otg_hcd_start_connect_timer(dwc_otg_hcd); + return 1; return 1; +} } + + +/** /** + * HCD Callback structure for handling mode switching. * HCD Callback structure for handling mode switching. + */ */ +static dwc_otg_cil_callbacks_t hcd_cil_callbacks = static dwc_otg_cil_callbacks_t hcd_cil_callbacks = +{ { + .start = dwc_otg_hcd_start_cb, .start = dwc_otg_hcd_start_cb, + .stop = dwc_otg_hcd_stop_cb, .stop = dwc_otg_hcd_stop_cb, + .disconnect = dwc_otg_hcd_disconnect_cb, .disconnect = dwc_otg_hcd_disconnect_cb, + .session_start = dwc_otg_hcd_session_start_cb, .session_start = dwc_otg_hcd_session_start_cb, + .p = 0, .p = 0, +}; }; + + +/** /** + * Reset tasklet function * Reset tasklet function + */ */ +static void reset_tasklet_func(unsigned long data) static void reset_tasklet_func(unsigned long data) +{ { + dwc_otg_hcd_t * dwc_otg_hcd = (dwc_otg_hcd_t *) data; dwc_otg_hcd_t * dwc_otg_hcd = (dwc_otg_hcd_t *) data; + dwc_otg_core_if_t * core_if = dwc_otg_hcd->core_if; dwc_otg_core_if_t * core_if = dwc_otg_hcd->core_if; + hprt0_data_t hprt0; hprt0_data_t hprt0; + DWC_DEBUGPL(DBG_HCDV, "USB RESET tasklet called\n"); DWC_DEBUGPL(DBG_HCDV, "USB RESET tasklet called\n"); + hprt0.d32 = dwc_otg_read_hprt0(core_if); hprt0.d32 = dwc_otg_read_hprt0(core_if); + hprt0.b.prtrst = 1; hprt0.b.prtrst = 1; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + mdelay(60); mdelay(60); + hprt0.b.prtrst = 0; hprt0.b.prtrst = 0; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + dwc_otg_hcd->flags.b.port_reset_change = 1; dwc_otg_hcd->flags.b.port_reset_change = 1; + return; return; +} } +static struct tasklet_struct reset_tasklet = static struct tasklet_struct reset_tasklet = +{ { + .next = NULL, .next = NULL, + .state = 0, .state = 0, + .count = ATOMIC_INIT(0), .count = ATOMIC_INIT(0), + .func = reset_tasklet_func, .func = reset_tasklet_func, + .data = 0, .data = 0, +}; }; + + +#ifdef CONFIG_OTG_PLB_DMA_TASKLET | #ifdef OTG_PLB_DMA_TASKLET +/** /** + * plbdma tasklet function * plbdma tasklet function + */ */ +static void plbdma_tasklet_func(unsigned long data) static void plbdma_tasklet_func(unsigned long data) +{ { + unsigned long flags; unsigned long flags; + dwc_otg_core_if_t * _core_if = (dwc_otg_core_if_t *) data dwc_otg_core_if_t * _core_if = (dwc_otg_core_if_t *) data + dma_xfer_t * dma_xfer = &_core_if->dma_xfer; dma_xfer_t * dma_xfer = &_core_if->dma_xfer; + + local_irq_save(flags); local_irq_save(flags); + DWC_DEBUGPL(DBG_SP, "Plbdma tasklet called\n"); DWC_DEBUGPL(DBG_SP, "Plbdma tasklet called\n"); + + if (_core_if->dma_xfer.dma_dir == OTG_TX_DMA) { if (_core_if->dma_xfer.dma_dir == OTG_TX_DMA) { + if ((((unsigned long)dma_xfer->dma_data_buff) & 0 if ((((unsigned long)dma_xfer->dma_data_buff) & 0 + /* call tx_dma - src,dest,len,intr */ /* call tx_dma - src,dest,len,intr */ + ppc4xx_start_plb_dma(_core_if, (void *)dma_xf ppc4xx_start_plb_dma(_core_if, (void *)dma_xf + dma_xfer->dma_data_fifo, (dm dma_xfer->dma_data_fifo, (dm + PLB_DMA_CH, OTG_TX_DMA); PLB_DMA_CH, OTG_TX_DMA); + } else { } else { + ppc4xx_start_plb_dma(_core_if, (void *)get_unalig ppc4xx_start_plb_dma(_core_if, (void *)get_unalig + dma_xfer->dma_data_fifo, (dma dma_xfer->dma_data_fifo, (dma + PLB_DMA_CH, OTG_TX_DMA); PLB_DMA_CH, OTG_TX_DMA); + } } + } } + else { else { + DWC_DEBUGPL(DBG_HCD, "0x%p 0x%p %d\n", (void *)dm DWC_DEBUGPL(DBG_HCD, "0x%p 0x%p %d\n", (void *)dm + dma_xfer->dma_data_buff, dma_xfer->d dma_xfer->dma_data_buff, dma_xfer->d + + ppc4xx_start_plb_dma(_core_if, (void *)dma_xf ppc4xx_start_plb_dma(_core_if, (void *)dma_xf + dma_xfer->dma_data_buff, (dma_xfer->d dma_xfer->dma_data_buff, (dma_xfer->d + PLB_DMA_CH, OTG_RX_DMA); PLB_DMA_CH, OTG_RX_DMA); + } } + + local_irq_restore(flags); local_irq_restore(flags); + return; return; +} } +static struct tasklet_struct plbdma_tasklet = static struct tasklet_struct plbdma_tasklet = +{ { + .next = NULL, .next = NULL, + .state = 0, .state = 0, + .count = ATOMIC_INIT(0), .count = ATOMIC_INIT(0), + .func = plbdma_tasklet_func, .func = plbdma_tasklet_func, + .data = 0, .data = 0, +}; }; + +#endif #endif + +/** /** + * Initializes the HCD. This function allocates memory for an * Initializes the HCD. This function allocates memory for an + * static parts of the usb_hcd and dwc_otg_hcd structures. It * static parts of the usb_hcd and dwc_otg_hcd structures. It + * USB bus with the core and calls the hc_driver->start() fun * USB bus with the core and calls the hc_driver->start() fun + * a negative error on failure. * a negative error on failure. + */ */ +int init_hcd_usecs(dwc_otg_hcd_t *_hcd); < + < +int __init dwc_otg_hcd_init(struct device *_dev, dwc_otg_de int __init dwc_otg_hcd_init(struct device *_dev, dwc_otg_de +{ { + struct usb_hcd *hcd = NULL; struct usb_hcd *hcd = NULL; + dwc_otg_hcd_t * dwc_otg_hcd = NULL; dwc_otg_hcd_t * dwc_otg_hcd = NULL; + dwc_otg_device_t * otg_dev = dev_get_drvdata(_dev); dwc_otg_device_t * otg_dev = dev_get_drvdata(_dev); + int num_channels; int num_channels; + int i; int i; + dwc_hc_t * channel; dwc_hc_t * channel; + int retval = 0; int retval = 0; + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD INIT\n"); DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD INIT\n"); + /* /* + * Allocate memory for the base HCD plus the DWC OTG HCD. * Allocate memory for the base HCD plus the DWC OTG HCD. + * Initialize the base HCD. * Initialize the base HCD. + */ */ + hcd = usb_create_hcd(&dwc_otg_hc_driver, _dev, dev_name(_ hcd = usb_create_hcd(&dwc_otg_hc_driver, _dev, dev_name(_ + if (hcd == NULL) { if (hcd == NULL) { + retval = -ENOMEM; retval = -ENOMEM; + goto error1; goto error1; + } } + dev_set_drvdata(_dev, dwc_otg_device); /* fscz restor dev_set_drvdata(_dev, dwc_otg_device); /* fscz restor + hcd->regs = otg_dev->base; hcd->regs = otg_dev->base; + hcd->self.otg_port = 1; hcd->self.otg_port = 1; + + /* Initialize the DWC OTG HCD. */ /* Initialize the DWC OTG HCD. */ + dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); + dwc_otg_hcd->core_if = otg_dev->core_if; dwc_otg_hcd->core_if = otg_dev->core_if; + otg_dev->hcd = dwc_otg_hcd; otg_dev->hcd = dwc_otg_hcd; + spin_lock_init(&dwc_otg_hcd->lock); < + /* Register the HCD CIL Callbacks */ /* Register the HCD CIL Callbacks */ + dwc_otg_cil_register_hcd_callbacks(otg_dev->core_if, dwc_otg_cil_register_hcd_callbacks(otg_dev->core_if, + &hcd_cil_callbacks, hc &hcd_cil_callbacks, hc + + /* Initialize the non-periodic schedule. */ /* Initialize the non-periodic schedule. */ + INIT_LIST_HEAD(&dwc_otg_hcd->non_periodic_sched_inactive) INIT_LIST_HEAD(&dwc_otg_hcd->non_periodic_sched_inactive) + INIT_LIST_HEAD(&dwc_otg_hcd->non_periodic_sched_activ INIT_LIST_HEAD(&dwc_otg_hcd->non_periodic_sched_activ + INIT_LIST_HEAD(&dwc_otg_hcd->non_periodic_sched_defer INIT_LIST_HEAD(&dwc_otg_hcd->non_periodic_sched_defer + + /* Initialize the periodic schedule. */ /* Initialize the periodic schedule. */ + INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_inactive); INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_inactive); + INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_ready); INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_ready); + INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_assigned) INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_assigned) + INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_queued); INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_queued); + + /* /* + * Create a host channel descriptor for each host channel * Create a host channel descriptor for each host channel + * in the controller. Initialize the channel descriptor a * in the controller. Initialize the channel descriptor a + */ */ + INIT_LIST_HEAD(&dwc_otg_hcd->free_hc_list); INIT_LIST_HEAD(&dwc_otg_hcd->free_hc_list); + num_channels = dwc_otg_hcd->core_if->core_params->hos num_channels = dwc_otg_hcd->core_if->core_params->hos + for (i = 0; i < num_channels; i++) { for (i = 0; i < num_channels; i++) { + channel = kmalloc(sizeof(dwc_hc_t), GFP_KERNE channel = kmalloc(sizeof(dwc_hc_t), GFP_KERNE + if (channel == NULL) { if (channel == NULL) { + retval = -ENOMEM; retval = -ENOMEM; + DWC_ERROR("%s: host channel allocatio DWC_ERROR("%s: host channel allocatio + goto error2; goto error2; + } } + memset(channel, 0, sizeof(dwc_hc_t)); memset(channel, 0, sizeof(dwc_hc_t)); + channel->hc_num = i; channel->hc_num = i; + dwc_otg_hcd->hc_ptr_array[i] = channel; dwc_otg_hcd->hc_ptr_array[i] = channel; + +#ifdef CONFIG_DWC_DEBUG | #ifdef DEBUG + init_timer(&dwc_otg_hcd->core_if->hc_xfer init_timer(&dwc_otg_hcd->core_if->hc_xfer +#endif /* */ #endif /* */ + DWC_DEBUGPL(DBG_HCDV, "HCD Added channel #%d, hc= DWC_DEBUGPL(DBG_HCDV, "HCD Added channel #%d, hc= + } } + + /* Initialize the Connection timeout timer. */ /* Initialize the Connection timeout timer. */ + init_timer(&dwc_otg_hcd->conn_timer); init_timer(&dwc_otg_hcd->conn_timer); + + /* Initialize reset tasklet. */ /* Initialize reset tasklet. */ + reset_tasklet.data = (unsigned long)dwc_otg_hcd; reset_tasklet.data = (unsigned long)dwc_otg_hcd; + dwc_otg_hcd->reset_tasklet = &reset_tasklet; dwc_otg_hcd->reset_tasklet = &reset_tasklet; + +#ifdef CONFIG_OTG_PLB_DMA_TASKLET | #ifdef OTG_PLB_DMA_TASKLET + /* Initialize plbdma tasklet. */ /* Initialize plbdma tasklet. */ + plbdma_tasklet.data = (unsigned long)dwc_otg_hcd->core_if plbdma_tasklet.data = (unsigned long)dwc_otg_hcd->core_if + dwc_otg_hcd->core_if->plbdma_tasklet = &plbdma_tasklet; dwc_otg_hcd->core_if->plbdma_tasklet = &plbdma_tasklet; +#endif #endif + + /* Set device flags indicating whether the HCD suppor /* Set device flags indicating whether the HCD suppor + if (otg_dev->core_if->dma_enable) { if (otg_dev->core_if->dma_enable) { + DWC_PRINT("Using DMA mode\n"); DWC_PRINT("Using DMA mode\n"); + _dev->dma_mask = &dma_mask; _dev->dma_mask = &dma_mask; + _dev->coherent_dma_mask = DMA_BIT_MASK(32); _dev->coherent_dma_mask = DMA_BIT_MASK(32); + } else { } else { + DWC_PRINT("Using Slave mode\n"); DWC_PRINT("Using Slave mode\n"); + _dev->dma_mask = (void *)0; _dev->dma_mask = (void *)0; + _dev->coherent_dma_mask = 0; _dev->coherent_dma_mask = 0; + } } + < + init_hcd_usecs(dwc_otg_hcd); < + < + /* /* + * Finish generic HCD initialization and start the HC * Finish generic HCD initialization and start the HC + * allocates the DMA buffer pool, registers the USB b * allocates the DMA buffer pool, registers the USB b + * IRQ line, and calls dwc_otg_hcd_start method. * IRQ line, and calls dwc_otg_hcd_start method. + */ */ + retval = usb_add_hcd(hcd, otg_dev->irq, IRQF_SHARED); retval = usb_add_hcd(hcd, otg_dev->irq, IRQF_SHARED); + if (retval < 0) { if (retval < 0) { + goto error2; goto error2; + } } + /* /* + * Allocate space for storing data on status transactions * Allocate space for storing data on status transactions + * data is sent, but this space acts as a bit bucket. Thi * data is sent, but this space acts as a bit bucket. Thi + * done after usb_add_hcd since that function allocates t * done after usb_add_hcd since that function allocates t + * pool. * pool. + */ */ + if (otg_dev->core_if->dma_enable) { if (otg_dev->core_if->dma_enable) { + dwc_otg_hcd->status_buf = dwc_otg_hcd->status_buf = + dma_alloc_coherent(_dev, DWC_OTG_HCD_STAT dma_alloc_coherent(_dev, DWC_OTG_HCD_STAT + &dwc_otg_hcd->status_ &dwc_otg_hcd->status_ + } else { } else { + dwc_otg_hcd->status_buf = kmalloc(DWC_OTG_HCD dwc_otg_hcd->status_buf = kmalloc(DWC_OTG_HCD + } } + if (dwc_otg_hcd->status_buf == NULL) { if (dwc_otg_hcd->status_buf == NULL) { + retval = -ENOMEM; retval = -ENOMEM; + DWC_ERROR("%s: status_buf allocation failed\n DWC_ERROR("%s: status_buf allocation failed\n + goto error3; goto error3; + } } + DWC_DEBUGPL(DBG_HCD, DWC_DEBUGPL(DBG_HCD, + "DWC OTG HCD Initialized HCD, usbbus=%d | "DWC OTG HCD Initialized HCD, bus=%s, u + hcd->self.busnum); | _dev->bus_id, hcd->self.busnum); + return 0; return 0; + + /* Error conditions */ /* Error conditions */ + error3:usb_remove_hcd(hcd); error3:usb_remove_hcd(hcd); + error2:dwc_otg_hcd_free(hcd); error2:dwc_otg_hcd_free(hcd); + usb_put_hcd(hcd); usb_put_hcd(hcd); + error1:return retval; error1:return retval; +} } + + +/** /** + * Removes the HCD. * Removes the HCD. + * Frees memory and resources associated with the HCD and der * Frees memory and resources associated with the HCD and der + */ */ +void dwc_otg_hcd_remove(struct device *_dev) void dwc_otg_hcd_remove(struct device *_dev) +{ { + dwc_otg_device_t * otg_dev = dev_get_drvdata(_dev); dwc_otg_device_t * otg_dev = dev_get_drvdata(_dev); + dwc_otg_hcd_t * dwc_otg_hcd = otg_dev->hcd; dwc_otg_hcd_t * dwc_otg_hcd = otg_dev->hcd; + struct usb_hcd *hcd = dwc_otg_hcd_to_hcd(dwc_otg_hcd) struct usb_hcd *hcd = dwc_otg_hcd_to_hcd(dwc_otg_hcd) + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD REMOVE\n"); DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD REMOVE\n"); + + /* Turn off all interrupts */ /* Turn off all interrupts */ + dwc_write_reg32(&dwc_otg_hcd->core_if->core_global_regs-> dwc_write_reg32(&dwc_otg_hcd->core_if->core_global_regs-> + dwc_modify_reg32(&dwc_otg_hcd->core_if->core_global_r dwc_modify_reg32(&dwc_otg_hcd->core_if->core_global_r + usb_remove_hcd(hcd); usb_remove_hcd(hcd); + dwc_otg_hcd_free(hcd); dwc_otg_hcd_free(hcd); + usb_put_hcd(hcd); usb_put_hcd(hcd); + return; return; +} } + + +/* ========================================================== /* ========================================================== + * Linux HC Driver Functions * Linux HC Driver Functions + * ========================================================== * ========================================================== + +/** /** + * Initializes dynamic portions of the DWC_otg HCD state. * Initializes dynamic portions of the DWC_otg HCD state. + */ */ +static void hcd_reinit(dwc_otg_hcd_t * _hcd) static void hcd_reinit(dwc_otg_hcd_t * _hcd) +{ { + struct list_head *item; struct list_head *item; + int num_channels; int num_channels; + int i; int i; + dwc_hc_t * channel; dwc_hc_t * channel; + _hcd->flags.d32 = 0; _hcd->flags.d32 = 0; + _hcd->non_periodic_qh_ptr = &_hcd->non_periodic_sched _hcd->non_periodic_qh_ptr = &_hcd->non_periodic_sched + _hcd->available_host_channels = _hcd->core_if->core_p | _hcd->non_periodic_channels = 0; + > _hcd->periodic_channels = 0; + + /* /* + * Put all channels in the free channel list and clean up * Put all channels in the free channel list and clean up + * states. * states. + */ */ + item = _hcd->free_hc_list.next; item = _hcd->free_hc_list.next; + while (item != &_hcd->free_hc_list) { while (item != &_hcd->free_hc_list) { + list_del(item); list_del(item); + item = _hcd->free_hc_list.next; item = _hcd->free_hc_list.next; + } } + num_channels = _hcd->core_if->core_params->host_chann num_channels = _hcd->core_if->core_params->host_chann + for (i = 0; i < num_channels; i++) { for (i = 0; i < num_channels; i++) { + channel = _hcd->hc_ptr_array[i]; channel = _hcd->hc_ptr_array[i]; + list_add_tail(&channel->hc_list_entry, &_hcd- list_add_tail(&channel->hc_list_entry, &_hcd- + dwc_otg_hc_cleanup(_hcd->core_if, channel); dwc_otg_hc_cleanup(_hcd->core_if, channel); + } } + + /* Initialize the DWC core for host mode operation. */ /* Initialize the DWC core for host mode operation. */ + dwc_otg_core_host_init(_hcd->core_if); dwc_otg_core_host_init(_hcd->core_if); +} } + + +/** Initializes the DWC_otg controller and its root hub and p /** Initializes the DWC_otg controller and its root hub and p + * mode operation. Activates the root port. Returns 0 on succ * mode operation. Activates the root port. Returns 0 on succ + * error code on failure. */ * error code on failure. */ +int dwc_otg_hcd_start(struct usb_hcd *_hcd) int dwc_otg_hcd_start(struct usb_hcd *_hcd) +{ { + dwc_otg_hcd_t * dwc_otg_hcd = hcd_to_dwc_otg_hcd(_hcd dwc_otg_hcd_t * dwc_otg_hcd = hcd_to_dwc_otg_hcd(_hcd + //dwc_otg_core_if_t * core_if = dwc_otg_hcd->core_if; //dwc_otg_core_if_t * core_if = dwc_otg_hcd->core_if; + struct usb_device *udev; struct usb_device *udev; + struct usb_bus *bus; struct usb_bus *bus; + +// int retval; // int retval; + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD START\n"); DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD START\n"); + bus = hcd_to_bus(_hcd); bus = hcd_to_bus(_hcd); + + /* Initialize the bus state. If the core is in Device Mo /* Initialize the bus state. If the core is in Device Mo + * HALT the USB bus and return. */ * HALT the USB bus and return. */ + + _hcd->state = HC_STATE_RUNNING; _hcd->state = HC_STATE_RUNNING; + + /* Initialize and connect root hub if one is not already /* Initialize and connect root hub if one is not already + if (bus->root_hub) { if (bus->root_hub) { + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Has Root Hu DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Has Root Hu + + /* Inform the HUB driver to resume. */ /* Inform the HUB driver to resume. */ + usb_hcd_resume_root_hub(_hcd); usb_hcd_resume_root_hub(_hcd); + } } + + else { else { + udev = usb_alloc_dev(NULL, bus, 0); udev = usb_alloc_dev(NULL, bus, 0); + udev->speed = USB_SPEED_HIGH; udev->speed = USB_SPEED_HIGH; + if (!udev) { if (!udev) { + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Err DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Err + return -ENODEV; return -ENODEV; + } } + + /* Not needed - VJ /* Not needed - VJ + if ((retval = usb_hcd_register_root_hub(udev, if ((retval = usb_hcd_register_root_hub(udev, + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Error re DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Error re + return -ENODEV; return -ENODEV; + } } + */ */ + } } + hcd_reinit(dwc_otg_hcd); hcd_reinit(dwc_otg_hcd); + return 0; return 0; +} } +static void qh_list_free(dwc_otg_hcd_t * _hcd, struct list_he static void qh_list_free(dwc_otg_hcd_t * _hcd, struct list_he +{ { + struct list_head *item; struct list_head *item; + dwc_otg_qh_t * qh; dwc_otg_qh_t * qh; + if (_qh_list->next == NULL) { if (_qh_list->next == NULL) { + /* The list hasn't been initialized yet. */ /* The list hasn't been initialized yet. */ + return; return; + } } + + /* Ensure there are no QTDs or URBs left. */ | /* Ensure there are no QTDs or URBs left. */ + kill_urbs_in_qh_list(_hcd, _qh_list); | kill_urbs_in_qh_list(_hcd, _qh_list); + for (item = _qh_list->next; item != _qh_list; item = for (item = _qh_list->next; item != _qh_list; item = + qh = list_entry(item, dwc_otg_qh_t, qh_list_e qh = list_entry(item, dwc_otg_qh_t, qh_list_e + dwc_otg_hcd_qh_remove_and_free(_hcd, qh); dwc_otg_hcd_qh_remove_and_free(_hcd, qh); + } } +} } + + +/** /** + * Halts the DWC_otg host mode operations in a clean manner. * Halts the DWC_otg host mode operations in a clean manner. + * stopped. * stopped. + */ */ +void dwc_otg_hcd_stop(struct usb_hcd *_hcd) void dwc_otg_hcd_stop(struct usb_hcd *_hcd) +{ { + dwc_otg_hcd_t * dwc_otg_hcd = hcd_to_dwc_otg_hcd(_hcd dwc_otg_hcd_t * dwc_otg_hcd = hcd_to_dwc_otg_hcd(_hcd + hprt0_data_t hprt0 = {.d32 = 0}; hprt0_data_t hprt0 = {.d32 = 0}; + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD STOP\n"); DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD STOP\n"); + + /* Turn off all host-specific interrupts. */ /* Turn off all host-specific interrupts. */ + dwc_otg_disable_host_interrupts(dwc_otg_hcd->core_if); dwc_otg_disable_host_interrupts(dwc_otg_hcd->core_if); + + /* /* + * The root hub should be disconnected before this functi * The root hub should be disconnected before this functi + * The disconnect will clear the QTD lists (via ..._hcd_u * The disconnect will clear the QTD lists (via ..._hcd_u + * and the QH lists (via ..._hcd_endpoint_disable). * and the QH lists (via ..._hcd_endpoint_disable). + */ */ + + /* Turn off the vbus power */ /* Turn off the vbus power */ + DWC_PRINT("PortPower off\n"); DWC_PRINT("PortPower off\n"); + hprt0.b.prtpwr = 0; hprt0.b.prtpwr = 0; + dwc_write_reg32(dwc_otg_hcd->core_if->host_if->hprt0, dwc_write_reg32(dwc_otg_hcd->core_if->host_if->hprt0, + return; return; +} } + + +/** Returns the current frame number. */ /** Returns the current frame number. */ +int dwc_otg_hcd_get_frame_number(struct usb_hcd *_hcd) int dwc_otg_hcd_get_frame_number(struct usb_hcd *_hcd) +{ { + dwc_otg_hcd_t * dwc_otg_hcd = hcd_to_dwc_otg_hcd(_hcd dwc_otg_hcd_t * dwc_otg_hcd = hcd_to_dwc_otg_hcd(_hcd + hfnum_data_t hfnum; hfnum_data_t hfnum; + hfnum.d32 = dwc_read_reg32(&dwc_otg_hcd->core_if->hos hfnum.d32 = dwc_read_reg32(&dwc_otg_hcd->core_if->hos + host_global_regs->hfn host_global_regs->hfn + +#ifdef DEBUG_SOF #ifdef DEBUG_SOF + DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD GET FRAME NUMB DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD GET FRAME NUMB + hfnum.b.frnum); hfnum.b.frnum); +#endif /* */ #endif /* */ + return hfnum.b.frnum; return hfnum.b.frnum; +} } + + +/** /** + * Frees secondary storage associated with the dwc_otg_hcd st * Frees secondary storage associated with the dwc_otg_hcd st + * in the struct usb_hcd field. * in the struct usb_hcd field. + */ */ +void dwc_otg_hcd_free(struct usb_hcd *_hcd) void dwc_otg_hcd_free(struct usb_hcd *_hcd) +{ { + dwc_otg_hcd_t * dwc_otg_hcd = hcd_to_dwc_otg_hcd(_hcd dwc_otg_hcd_t * dwc_otg_hcd = hcd_to_dwc_otg_hcd(_hcd + int i; int i; + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD FREE\n"); DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD FREE\n"); + del_timers(dwc_otg_hcd); del_timers(dwc_otg_hcd); + + /* Free memory for QH/QTD lists */ /* Free memory for QH/QTD lists */ + qh_list_free(dwc_otg_hcd, qh_list_free(dwc_otg_hcd, + &dwc_otg_hcd->non_periodic_sched_inactive); &dwc_otg_hcd->non_periodic_sched_inactive); + qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_ + qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_ + qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sche qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sche + qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sche qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sche + qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sche qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sche + qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sche qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sche + + /* Free memory for the host channels. */ /* Free memory for the host channels. */ + for (i = 0; i < MAX_EPS_CHANNELS; i++) { for (i = 0; i < MAX_EPS_CHANNELS; i++) { + dwc_hc_t * hc = dwc_otg_hcd->hc_ptr_array[i]; dwc_hc_t * hc = dwc_otg_hcd->hc_ptr_array[i]; + if (hc != NULL) { if (hc != NULL) { + DWC_DEBUGPL(DBG_HCDV, "HCD Free chann DWC_DEBUGPL(DBG_HCDV, "HCD Free chann + kfree(hc); kfree(hc); + } } + } } + if (dwc_otg_hcd->core_if->dma_enable) { if (dwc_otg_hcd->core_if->dma_enable) { + if (dwc_otg_hcd->status_buf_dma) { if (dwc_otg_hcd->status_buf_dma) { + dma_free_coherent(_hcd->self.controll dma_free_coherent(_hcd->self.controll + DWC_OTG_HCD_STATUS DWC_OTG_HCD_STATUS + dwc_otg_hcd->statu dwc_otg_hcd->statu + dwc_otg_hcd->statu dwc_otg_hcd->statu + } } + } else if (dwc_otg_hcd->status_buf != NULL) { } else if (dwc_otg_hcd->status_buf != NULL) { + kfree(dwc_otg_hcd->status_buf); kfree(dwc_otg_hcd->status_buf); + } } + return; return; +} } + + +#ifdef CONFIG_DWC_DEBUG | #ifdef DEBUG +static void dump_urb_info(struct urb *_urb, char *_fn_name) static void dump_urb_info(struct urb *_urb, char *_fn_name) +{ { + DWC_PRINT("%s, urb %p\n", _fn_name, _urb); DWC_PRINT("%s, urb %p\n", _fn_name, _urb); + DWC_PRINT(" Device address: %d\n", usb_pipedevice(_u DWC_PRINT(" Device address: %d\n", usb_pipedevice(_u + DWC_PRINT(" Endpoint: %d, %s\n", usb_pipeendpoint(_u DWC_PRINT(" Endpoint: %d, %s\n", usb_pipeendpoint(_u + (usb_pipein(_urb->pipe) ? "IN" : "OUT")); (usb_pipein(_urb->pipe) ? "IN" : "OUT")); + DWC_PRINT(" Endpoint type: %s\n", ( { DWC_PRINT(" Endpoint type: %s\n", ( { + char *pipetype; char *pipetype; + switch (usb_pipetype(_urb->pipe)) { switch (usb_pipetype(_urb->pipe)) { + case PIPE_CONTROL: case PIPE_CONTROL: + pipetype = "CONTROL"; break; pipetype = "CONTROL"; break; + case PIPE_BULK: case PIPE_BULK: + pipetype = "BULK"; break; pipetype = "BULK"; break; + case PIPE_INTERRUPT: case PIPE_INTERRUPT: + pipetype = "INTERRUPT"; break pipetype = "INTERRUPT"; break + case PIPE_ISOCHRONOUS: case PIPE_ISOCHRONOUS: + pipetype = "ISOCHRONOUS"; bre pipetype = "ISOCHRONOUS"; bre + default: default: + pipetype = "UNKNOWN"; break; pipetype = "UNKNOWN"; break; + }; }; + pipetype; pipetype; + } )) ; } )) ; + DWC_PRINT(" Speed: %s\n", ( { DWC_PRINT(" Speed: %s\n", ( { + char *speed; char *speed; + switch (_urb->dev->speed) { switch (_urb->dev->speed) { + case USB_SPEED_HIGH: case USB_SPEED_HIGH: + speed = "HIGH"; break; speed = "HIGH"; break; + case USB_SPEED_FULL: case USB_SPEED_FULL: + speed = "FULL"; break; speed = "FULL"; break; + case USB_SPEED_LOW: case USB_SPEED_LOW: + speed = "LOW"; break; speed = "LOW"; break; + default: default: + speed = "UNKNOWN"; break; speed = "UNKNOWN"; break; + }; }; + speed; speed; + } )) ; } )) ; + DWC_PRINT(" Max packet size: %d\n", DWC_PRINT(" Max packet size: %d\n", + usb_maxpacket(_urb->dev, _urb->pipe, usb_p usb_maxpacket(_urb->dev, _urb->pipe, usb_p + DWC_PRINT(" Data buffer length: %d\n", _urb->transfe DWC_PRINT(" Data buffer length: %d\n", _urb->transfe + DWC_PRINT(" Transfer buffer: %p, Transfer DMA: %p\n" DWC_PRINT(" Transfer buffer: %p, Transfer DMA: %p\n" + _urb->transfer_buffer, (void *)_urb->trans _urb->transfer_buffer, (void *)_urb->trans + DWC_PRINT(" Setup buffer: %p, Setup DMA: %p\n", _urb DWC_PRINT(" Setup buffer: %p, Setup DMA: %p\n", _urb + (void *)_urb->setup_dma); (void *)_urb->setup_dma); + DWC_PRINT(" Interval: %d\n", _urb->interval); DWC_PRINT(" Interval: %d\n", _urb->interval); + if (usb_pipetype(_urb->pipe) == PIPE_ISOCHRONOUS) { if (usb_pipetype(_urb->pipe) == PIPE_ISOCHRONOUS) { + int i; int i; + for (i = 0; i < _urb->number_of_packets; i++) for (i = 0; i < _urb->number_of_packets; i++) + DWC_PRINT(" ISO Desc %d:\n", i); DWC_PRINT(" ISO Desc %d:\n", i); + DWC_PRINT(" offset: %d, length %d\ DWC_PRINT(" offset: %d, length %d\ + _urb->iso_frame_desc[i].of _urb->iso_frame_desc[i].of + _urb->iso_frame_desc[i].le _urb->iso_frame_desc[i].le + } } + } } +} } +static void dump_channel_info(dwc_otg_hcd_t * _hcd, dwc_otg_ static void dump_channel_info(dwc_otg_hcd_t * _hcd, dwc_otg_ +{ { + if (qh->channel != NULL) { if (qh->channel != NULL) { + dwc_hc_t * hc = qh->channel; dwc_hc_t * hc = qh->channel; + struct list_head *item; struct list_head *item; + dwc_otg_qh_t * qh_item; dwc_otg_qh_t * qh_item; + int num_channels = _hcd->core_if->core_params int num_channels = _hcd->core_if->core_params + int i; int i; + dwc_otg_hc_regs_t * hc_regs; dwc_otg_hc_regs_t * hc_regs; + hcchar_data_t hcchar; hcchar_data_t hcchar; + hcsplt_data_t hcsplt; hcsplt_data_t hcsplt; + hctsiz_data_t hctsiz; hctsiz_data_t hctsiz; + uint32_t hcdma; uint32_t hcdma; + hc_regs = _hcd->core_if->host_if->hc_regs[hc- hc_regs = _hcd->core_if->host_if->hc_regs[hc- + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar) hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar) + hcsplt.d32 = dwc_read_reg32(&hc_regs->hcsplt) hcsplt.d32 = dwc_read_reg32(&hc_regs->hcsplt) + hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz) hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz) + hcdma = dwc_read_reg32(&hc_regs->hcdma); hcdma = dwc_read_reg32(&hc_regs->hcdma); + DWC_PRINT(" Assigned to channel %p:\n", hc); DWC_PRINT(" Assigned to channel %p:\n", hc); + DWC_PRINT(" hcchar 0x%08x, hcsplt 0x%08x\n DWC_PRINT(" hcchar 0x%08x, hcsplt 0x%08x\n + DWC_PRINT(" hctsiz 0x%08x, hcdma 0x%08x\n" DWC_PRINT(" hctsiz 0x%08x, hcdma 0x%08x\n" + DWC_PRINT(" dev_addr: %d, ep_num: %d, ep_i DWC_PRINT(" dev_addr: %d, ep_num: %d, ep_i + hc->dev_addr, hc->ep_num, hc->ep_i hc->dev_addr, hc->ep_num, hc->ep_i + DWC_PRINT(" ep_type: %d\n", hc->ep_type); DWC_PRINT(" ep_type: %d\n", hc->ep_type); + DWC_PRINT(" max_packet: %d\n", hc->max_pac DWC_PRINT(" max_packet: %d\n", hc->max_pac + DWC_PRINT(" data_pid_start: %d\n", hc->dat DWC_PRINT(" data_pid_start: %d\n", hc->dat + DWC_PRINT(" xfer_started: %d\n", hc->xfer_ DWC_PRINT(" xfer_started: %d\n", hc->xfer_ + DWC_PRINT(" halt_status: %d\n", hc->halt_s DWC_PRINT(" halt_status: %d\n", hc->halt_s + DWC_PRINT(" xfer_buff: %p\n", hc->xfer_buf DWC_PRINT(" xfer_buff: %p\n", hc->xfer_buf + DWC_PRINT(" xfer_len: %d\n", hc->xfer_len) DWC_PRINT(" xfer_len: %d\n", hc->xfer_len) + DWC_PRINT(" qh: %p\n", hc->qh); DWC_PRINT(" qh: %p\n", hc->qh); + DWC_PRINT(" NP inactive sched:\n"); DWC_PRINT(" NP inactive sched:\n"); + list_for_each(item, &_hcd->non_periodic_sched list_for_each(item, &_hcd->non_periodic_sched + qh_item = list_entry(item, dwc_otg_qh qh_item = list_entry(item, dwc_otg_qh + DWC_PRINT(" %p\n", qh_item); DWC_PRINT(" %p\n", qh_item); + } DWC_PRINT(" NP active sched:\n"); } DWC_PRINT(" NP active sched:\n"); + list_for_each(item, &_hcd->non_periodic_sched list_for_each(item, &_hcd->non_periodic_sched + qh_item = list_entry(item, dwc_otg_qh qh_item = list_entry(item, dwc_otg_qh + DWC_PRINT(" %p\n", qh_item); DWC_PRINT(" %p\n", qh_item); + } DWC_PRINT(" NP deferred sched:\n"); } DWC_PRINT(" NP deferred sched:\n"); + list_for_each(item, &_hcd->non_periodic_sched list_for_each(item, &_hcd->non_periodic_sched + qh_item = list_entry(item, dwc_otg_qh qh_item = list_entry(item, dwc_otg_qh + DWC_PRINT(" %p\n", qh_item); DWC_PRINT(" %p\n", qh_item); + } DWC_PRINT(" Channels: \n"); } DWC_PRINT(" Channels: \n"); + for (i = 0; i < num_channels; i++) { for (i = 0; i < num_channels; i++) { + dwc_hc_t * hc = _hcd->hc_ptr_array[i] dwc_hc_t * hc = _hcd->hc_ptr_array[i] + DWC_PRINT(" %2d: %p\n", i, hc); DWC_PRINT(" %2d: %p\n", i, hc); + } } + } } +} } + +#endif /* */ #endif /* */ + +/** Starts processing a USB transfer request specified by a U /** Starts processing a USB transfer request specified by a U + * (URB). mem_flags indicates the type of memory allocation t * (URB). mem_flags indicates the type of memory allocation t + * processing this URB. */ * processing this URB. */ +int dwc_otg_hcd_urb_enqueue(struct usb_hcd *_hcd, int dwc_otg_hcd_urb_enqueue(struct usb_hcd *_hcd, + struct urb *_urb, struct urb *_urb, + gfp_t _mem_flags) gfp_t _mem_flags) +{ { + unsigned long flags; unsigned long flags; + int retval; int retval; + dwc_otg_hcd_t * dwc_otg_hcd = hcd_to_dwc_otg_hcd(_hcd dwc_otg_hcd_t * dwc_otg_hcd = hcd_to_dwc_otg_hcd(_hcd + dwc_otg_qtd_t * qtd; dwc_otg_qtd_t * qtd; + + local_irq_save(flags); local_irq_save(flags); + retval = usb_hcd_link_urb_to_ep(_hcd, _urb); retval = usb_hcd_link_urb_to_ep(_hcd, _urb); + if (retval) { if (retval) { + local_irq_restore(flags); local_irq_restore(flags); + return retval; return retval; + } } +#ifdef CONFIG_DWC_DEBUG | #ifdef DEBUG + if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { + dump_urb_info(_urb, "dwc_otg_hcd_urb_enqueue" dump_urb_info(_urb, "dwc_otg_hcd_urb_enqueue" + } } +#endif /* */ #endif /* */ + if (!dwc_otg_hcd->flags.b.port_connect_status) { if (!dwc_otg_hcd->flags.b.port_connect_status) { + /* No longer connected. */ /* No longer connected. */ + usb_hcd_unlink_urb_from_ep(_hcd, _urb); < + local_irq_restore(flags); local_irq_restore(flags); + return -ENODEV; return -ENODEV; + } } + qtd = dwc_otg_hcd_qtd_create(_urb); qtd = dwc_otg_hcd_qtd_create(_urb); + if (qtd == NULL) { if (qtd == NULL) { + usb_hcd_unlink_urb_from_ep(_hcd, _urb); < + local_irq_restore(flags); local_irq_restore(flags); + DWC_ERROR("DWC OTG HCD URB Enqueue failed cre DWC_ERROR("DWC OTG HCD URB Enqueue failed cre + return -ENOMEM; return -ENOMEM; + } } + retval = dwc_otg_hcd_qtd_add(qtd, dwc_otg_hcd); retval = dwc_otg_hcd_qtd_add(qtd, dwc_otg_hcd); + if (retval < 0) { if (retval < 0) { + DWC_ERROR("DWC OTG HCD URB Enqueue failed add DWC_ERROR("DWC OTG HCD URB Enqueue failed add + "Error status %d\n", retval); "Error status %d\n", retval); + usb_hcd_unlink_urb_from_ep(_hcd, _urb); < + dwc_otg_hcd_qtd_free(qtd); dwc_otg_hcd_qtd_free(qtd); + } } + local_irq_restore(flags); local_irq_restore(flags); + return retval; return retval; +} } + + +/** Aborts/cancels a USB transfer request. Always returns 0 t /** Aborts/cancels a USB transfer request. Always returns 0 t + * success. */ * success. */ +int dwc_otg_hcd_urb_dequeue(struct usb_hcd *_hcd, struct urb int dwc_otg_hcd_urb_dequeue(struct usb_hcd *_hcd, struct urb +{ { + unsigned long flags; unsigned long flags; + dwc_otg_hcd_t * dwc_otg_hcd; dwc_otg_hcd_t * dwc_otg_hcd; + dwc_otg_qtd_t * urb_qtd; dwc_otg_qtd_t * urb_qtd; + dwc_otg_qh_t * qh; dwc_otg_qh_t * qh; + struct usb_host_endpoint *_ep = dwc_urb_to_endpoint(_ < + int retval; int retval; + + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Dequeue\n"); DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Dequeue\n"); + < + if (!_ep) < + return -EINVAL; < + < + local_irq_save(flags); local_irq_save(flags); + retval = usb_hcd_check_unlink_urb(_hcd, _urb, _status retval = usb_hcd_check_unlink_urb(_hcd, _urb, _status + if (retval) { if (retval) { + local_irq_restore(flags); local_irq_restore(flags); + return retval; return retval; + } } + + dwc_otg_hcd = hcd_to_dwc_otg_hcd(_hcd); dwc_otg_hcd = hcd_to_dwc_otg_hcd(_hcd); + + urb_qtd = (dwc_otg_qtd_t *) _urb->hcpriv; urb_qtd = (dwc_otg_qtd_t *) _urb->hcpriv; + if (urb_qtd == NULL) { if (urb_qtd == NULL) { + printk("urb_qtd is NULL for _urb %08x\n",(uns printk("urb_qtd is NULL for _urb %08x\n",(uns + goto done; goto done; + } } + qh = (dwc_otg_qh_t *) urb_qtd->qtd_qh_ptr; qh = (dwc_otg_qh_t *) urb_qtd->qtd_qh_ptr; + if (qh == NULL) { if (qh == NULL) { + goto done; goto done; + } } +#ifdef CONFIG_DWC_DEBUG | #ifdef DEBUG + if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { + dump_urb_info(_urb, "dwc_otg_hcd_urb_dequeue" dump_urb_info(_urb, "dwc_otg_hcd_urb_dequeue" + if (urb_qtd == qh->qtd_in_process) { if (urb_qtd == qh->qtd_in_process) { + dump_channel_info(dwc_otg_hcd, qh); dump_channel_info(dwc_otg_hcd, qh); + } } + } } + +#endif /* */ #endif /* */ + if (urb_qtd == qh->qtd_in_process) { if (urb_qtd == qh->qtd_in_process) { + /* The QTD is in process (it has been assigned to /* The QTD is in process (it has been assigned to + if (dwc_otg_hcd->flags.b.port_connect_status) { if (dwc_otg_hcd->flags.b.port_connect_status) { + + /* /* + * If still connected (i.e. in host mode) * If still connected (i.e. in host mode) + * channel so it can be used for other tr * channel so it can be used for other tr + * no longer connected, the host register * no longer connected, the host register + * written to halt the channel since the * written to halt the channel since the + * device mode. * device mode. + */ */ + dwc_otg_hc_halt(dwc_otg_hcd->core_if, qh- dwc_otg_hc_halt(dwc_otg_hcd->core_if, qh- + DWC_OTG_HC_XFER_U DWC_OTG_HC_XFER_U + } } + } } + + /* /* + * Free the QTD and clean up the associated QH. Leave the * Free the QTD and clean up the associated QH. Leave the + * schedule if it has any remaining QTDs. * schedule if it has any remaining QTDs. + */ */ + dwc_otg_hcd_qtd_remove_and_free(urb_qtd); dwc_otg_hcd_qtd_remove_and_free(urb_qtd); + if (urb_qtd == qh->qtd_in_process) { if (urb_qtd == qh->qtd_in_process) { + dwc_otg_hcd_qh_deactivate(dwc_otg_hcd, qh, 0) dwc_otg_hcd_qh_deactivate(dwc_otg_hcd, qh, 0) + qh->channel = NULL; qh->channel = NULL; + qh->qtd_in_process = NULL; qh->qtd_in_process = NULL; + } else if (list_empty(&qh->qtd_list)) { } else if (list_empty(&qh->qtd_list)) { + dwc_otg_hcd_qh_remove(dwc_otg_hcd, qh); dwc_otg_hcd_qh_remove(dwc_otg_hcd, qh); + } } +done: done: + > local_irq_restore(flags); + _urb->hcpriv = NULL; _urb->hcpriv = NULL; + + /* Higher layer software sets URB status. */ /* Higher layer software sets URB status. */ + > #if 1 /* Fixed bug relate kernel hung when unplug cable */ + usb_hcd_unlink_urb_from_ep(_hcd, _urb); usb_hcd_unlink_urb_from_ep(_hcd, _urb); + usb_hcd_giveback_urb(_hcd, _urb, _status); usb_hcd_giveback_urb(_hcd, _urb, _status); + < + local_irq_restore(flags); < + < + if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { + DWC_PRINT("Called usb_hcd_giveback_urb()\n"); DWC_PRINT("Called usb_hcd_giveback_urb()\n"); + DWC_PRINT(" urb->status = %d\n", _status); DWC_PRINT(" urb->status = %d\n", _status); + } } + > #else + > if (_status != -ECONNRESET) { + > usb_hcd_unlink_urb_from_ep(_hcd, _urb); + > usb_hcd_giveback_urb(_hcd, _urb, _status); + > if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) + > DWC_PRINT("Called usb_hcd_giveback_ur + > DWC_PRINT(" urb->status = %d\n", _st + > } + > } + > #endif + return 0; return 0; +} } + + +/** Frees resources in the DWC_otg controller related to a gi /** Frees resources in the DWC_otg controller related to a gi + * clears state in the HCD related to the endpoint. Any URBs * clears state in the HCD related to the endpoint. Any URBs + * must already be dequeued. */ * must already be dequeued. */ +void dwc_otg_hcd_endpoint_disable(struct usb_hcd *_hcd, void dwc_otg_hcd_endpoint_disable(struct usb_hcd *_hcd, + struct usb_host_endpoint *_ struct usb_host_endpoint *_ +{ { + dwc_otg_qh_t * qh; dwc_otg_qh_t * qh; + dwc_otg_hcd_t * dwc_otg_hcd = hcd_to_dwc_otg_hcd(_hcd dwc_otg_hcd_t * dwc_otg_hcd = hcd_to_dwc_otg_hcd(_hcd + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD EP DISABLE: _bEndpo DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD EP DISABLE: _bEndpo + "endpoint=%d\n", _ep->desc.bEndpointAdd "endpoint=%d\n", _ep->desc.bEndpointAdd + dwc_ep_addr_to_endpoint(_ep->desc.bEndp dwc_ep_addr_to_endpoint(_ep->desc.bEndp + qh = (dwc_otg_qh_t *) (_ep->hcpriv); qh = (dwc_otg_qh_t *) (_ep->hcpriv); + if (qh != NULL) { if (qh != NULL) { + +#ifdef CONFIG_DWC_DEBUG | #ifdef DEBUG + /** Check that the QTD list is really empty * /** Check that the QTD list is really empty * + if (!list_empty(&qh->qtd_list)) { if (!list_empty(&qh->qtd_list)) { + DWC_WARN("DWC OTG HCD EP DISABLE:" DWC_WARN("DWC OTG HCD EP DISABLE:" + " QTD List for this endpoin " QTD List for this endpoin + } } + +#endif /* */ #endif /* */ + dwc_otg_hcd_qh_remove_and_free(dwc_otg_hcd, qh); dwc_otg_hcd_qh_remove_and_free(dwc_otg_hcd, qh); + _ep->hcpriv = NULL; _ep->hcpriv = NULL; + } } + return; return; +} } + + > extern int fscz_debug; +/** Handles host mode interrupts for the DWC_otg controller. /** Handles host mode interrupts for the DWC_otg controller. + * there was no interrupt to handle. Returns IRQ_HANDLED if t * there was no interrupt to handle. Returns IRQ_HANDLED if t + * interrupt. * interrupt. + * * + * This function is called by the USB core when an interrupt * This function is called by the USB core when an interrupt +irqreturn_t dwc_otg_hcd_irq(struct usb_hcd * _hcd) irqreturn_t dwc_otg_hcd_irq(struct usb_hcd * _hcd) +{ { + dwc_otg_hcd_t * dwc_otg_hcd = hcd_to_dwc_otg_hcd(_hcd dwc_otg_hcd_t * dwc_otg_hcd = hcd_to_dwc_otg_hcd(_hcd + return IRQ_RETVAL(dwc_otg_hcd_handle_intr(dwc_otg_hcd return IRQ_RETVAL(dwc_otg_hcd_handle_intr(dwc_otg_hcd +} } + +/** Creates Status Change bitmap for the root hub and root po /** Creates Status Change bitmap for the root hub and root po + * returned in buf. Bit 0 is the status change indicator for * returned in buf. Bit 0 is the status change indicator for + * is the status change indicator for the single root port. R * is the status change indicator for the single root port. R + * change indicator is 1, otherwise returns 0. */ * change indicator is 1, otherwise returns 0. */ +int dwc_otg_hcd_hub_status_data(struct usb_hcd *_hcd, char *_ int dwc_otg_hcd_hub_status_data(struct usb_hcd *_hcd, char *_ +{ { + dwc_otg_hcd_t * dwc_otg_hcd = hcd_to_dwc_otg_hcd(_hcd dwc_otg_hcd_t * dwc_otg_hcd = hcd_to_dwc_otg_hcd(_hcd + _buf[0] = 0; _buf[0] = 0; + _buf[0] |= (dwc_otg_hcd->flags.b.port_connect_status_ _buf[0] |= (dwc_otg_hcd->flags.b.port_connect_status_ + || dwc_otg_hcd->flags.b.port_reset_chang || dwc_otg_hcd->flags.b.port_reset_chang + || dwc_otg_hcd->flags.b.port_enable_chan || dwc_otg_hcd->flags.b.port_enable_chan + || dwc_otg_hcd->flags.b.port_suspend_cha || dwc_otg_hcd->flags.b.port_suspend_cha + || dwc_otg_hcd->flags.b.port_over_curren || dwc_otg_hcd->flags.b.port_over_curren + +#ifdef CONFIG_DWC_DEBUG | #ifdef DEBUG + if (_buf[0]) { if (_buf[0]) { + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB STATUS DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB STATUS + " Root port status changed\n"); " Root port status changed\n"); + DWC_DEBUGPL(DBG_HCDV, " port_connect_status_ DWC_DEBUGPL(DBG_HCDV, " port_connect_status_ + dwc_otg_hcd->flags.b.port_connec dwc_otg_hcd->flags.b.port_connec + DWC_DEBUGPL(DBG_HCDV, " port_reset_change: % DWC_DEBUGPL(DBG_HCDV, " port_reset_change: % + dwc_otg_hcd->flags.b.port_reset_ dwc_otg_hcd->flags.b.port_reset_ + DWC_DEBUGPL(DBG_HCDV, " port_enable_change: DWC_DEBUGPL(DBG_HCDV, " port_enable_change: + dwc_otg_hcd->flags.b.port_enable dwc_otg_hcd->flags.b.port_enable + DWC_DEBUGPL(DBG_HCDV, " port_suspend_change: DWC_DEBUGPL(DBG_HCDV, " port_suspend_change: + dwc_otg_hcd->flags.b.port_suspen dwc_otg_hcd->flags.b.port_suspen + DWC_DEBUGPL(DBG_HCDV, " port_over_current_ch DWC_DEBUGPL(DBG_HCDV, " port_over_current_ch + dwc_otg_hcd->flags.b.port_over_c dwc_otg_hcd->flags.b.port_over_c + } } + +#endif /* */ #endif /* */ + return (_buf[0] != 0); return (_buf[0] != 0); +} } + + +#ifdef DWC_HS_ELECT_TST #ifdef DWC_HS_ELECT_TST +/* /* + * Quick and dirty hack to implement the HS Electrical Test * Quick and dirty hack to implement the HS Electrical Test + * SINGLE_STEP_GET_DEVICE_DESCRIPTOR feature. * SINGLE_STEP_GET_DEVICE_DESCRIPTOR feature. + * * + * This code was copied from our userspace app "hset". It sen * This code was copied from our userspace app "hset". It sen + * Get Device Descriptor control sequence in two parts, first * Get Device Descriptor control sequence in two parts, first + * Setup packet by itself, followed some time later by the In * Setup packet by itself, followed some time later by the In + * Ack packets. Rather than trying to figure out how to add t * Ack packets. Rather than trying to figure out how to add t + * functionality to the normal driver code, we just hijack th * functionality to the normal driver code, we just hijack th + * hardware, using these two function to drive the hardware * hardware, using these two function to drive the hardware + * directly. * directly. + */ */ +dwc_otg_core_global_regs_t * global_regs; dwc_otg_core_global_regs_t * global_regs; +dwc_otg_host_global_regs_t * hc_global_regs; dwc_otg_host_global_regs_t * hc_global_regs; +dwc_otg_hc_regs_t * hc_regs; dwc_otg_hc_regs_t * hc_regs; +uint32_t * data_fifo; uint32_t * data_fifo; + +static void do_setup(void) static void do_setup(void) +{ { + gintsts_data_t gintsts; gintsts_data_t gintsts; + hctsiz_data_t hctsiz; hctsiz_data_t hctsiz; + hcchar_data_t hcchar; hcchar_data_t hcchar; + haint_data_t haint; haint_data_t haint; + hcint_data_t hcint; hcint_data_t hcint; + + /* Enable HAINTs */ /* Enable HAINTs */ + dwc_write_reg32(&hc_global_regs->haintmsk, 0x0001); dwc_write_reg32(&hc_global_regs->haintmsk, 0x0001); + + /* Enable HCINTs */ /* Enable HCINTs */ + dwc_write_reg32(&hc_regs->hcintmsk, 0x04a3); dwc_write_reg32(&hc_regs->hcintmsk, 0x04a3); + + /* Read GINTSTS */ /* Read GINTSTS */ + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); + + /* Read HAINT */ /* Read HAINT */ + haint.d32 = dwc_read_reg32(&hc_global_regs->haint); haint.d32 = dwc_read_reg32(&hc_global_regs->haint); + + //fprintf(stderr, "HAINT: %08x\n", haint.d32); //fprintf(stderr, "HAINT: %08x\n", haint.d32); + + /* Read HCINT */ /* Read HCINT */ + hcint.d32 = dwc_read_reg32(&hc_regs->hcint); hcint.d32 = dwc_read_reg32(&hc_regs->hcint); + + //fprintf(stderr, "HCINT: %08x\n", hcint.d32); //fprintf(stderr, "HCINT: %08x\n", hcint.d32); + + /* Read HCCHAR */ /* Read HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + + //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); + + /* Clear HCINT */ /* Clear HCINT */ + dwc_write_reg32(&hc_regs->hcint, hcint.d32); dwc_write_reg32(&hc_regs->hcint, hcint.d32); + + /* Clear HAINT */ /* Clear HAINT */ + dwc_write_reg32(&hc_global_regs->haint, haint.d32); dwc_write_reg32(&hc_global_regs->haint, haint.d32); + + /* Clear GINTSTS */ /* Clear GINTSTS */ + dwc_write_reg32(&global_regs->gintsts, gintsts.d32); dwc_write_reg32(&global_regs->gintsts, gintsts.d32); + + /* Read GINTSTS */ /* Read GINTSTS */ + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); + + /* /* + * Send Setup packet (Get Device Descriptor) * Send Setup packet (Get Device Descriptor) + */ */ + + /* Make sure channel is disabled */ /* Make sure channel is disabled */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + if (hcchar.b.chen) { if (hcchar.b.chen) { + + //fprintf(stderr, "Channel already enabled 1, HCC //fprintf(stderr, "Channel already enabled 1, HCC + hcchar.b.chdis = 1; hcchar.b.chdis = 1; + +// hcchar.b.chen = 1; // hcchar.b.chen = 1; + dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); + + //sleep(1); //sleep(1); + mdelay(1000); mdelay(1000); + + /* Read GINTSTS */ /* Read GINTSTS */ + gintsts.d32 = dwc_read_reg32(&global_regs->gi gintsts.d32 = dwc_read_reg32(&global_regs->gi + + //fprintf(stderr, "GINTSTS: %08x\n", gintsts. //fprintf(stderr, "GINTSTS: %08x\n", gintsts. + + /* Read HAINT */ /* Read HAINT */ + haint.d32 = dwc_read_reg32(&hc_global_regs->h haint.d32 = dwc_read_reg32(&hc_global_regs->h + + //fprintf(stderr, "HAINT: %08x\n", haint.d32) //fprintf(stderr, "HAINT: %08x\n", haint.d32) + + /* Read HCINT */ /* Read HCINT */ + hcint.d32 = dwc_read_reg32(&hc_regs->hcint); hcint.d32 = dwc_read_reg32(&hc_regs->hcint); + + //fprintf(stderr, "HCINT: %08x\n", hcint.d32) //fprintf(stderr, "HCINT: %08x\n", hcint.d32) + + /* Read HCCHAR */ /* Read HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar) hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar) + + //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d3 //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d3 + + /* Clear HCINT */ /* Clear HCINT */ + dwc_write_reg32(&hc_regs->hcint, hcint.d32); dwc_write_reg32(&hc_regs->hcint, hcint.d32); + + /* Clear HAINT */ /* Clear HAINT */ + dwc_write_reg32(&hc_global_regs->haint, haint dwc_write_reg32(&hc_global_regs->haint, haint + + /* Clear GINTSTS */ /* Clear GINTSTS */ + dwc_write_reg32(&global_regs->gintsts, gintst dwc_write_reg32(&global_regs->gintsts, gintst + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar) hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar) + + //if (hcchar.b.chen) { //if (hcchar.b.chen) { + // fprintf(stderr, "** Channel _still_ enabl // fprintf(stderr, "** Channel _still_ enabl + //} //} + } } + + /* Set HCTSIZ */ /* Set HCTSIZ */ + hctsiz.d32 = 0; hctsiz.d32 = 0; + hctsiz.b.xfersize = 8; hctsiz.b.xfersize = 8; + hctsiz.b.pktcnt = 1; hctsiz.b.pktcnt = 1; + hctsiz.b.pid = DWC_OTG_HC_PID_SETUP; hctsiz.b.pid = DWC_OTG_HC_PID_SETUP; + dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32); dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32); + + /* Set HCCHAR */ /* Set HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL; hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL; + hcchar.b.epdir = 0; hcchar.b.epdir = 0; + hcchar.b.epnum = 0; hcchar.b.epnum = 0; + hcchar.b.mps = 8; hcchar.b.mps = 8; + hcchar.b.chen = 1; hcchar.b.chen = 1; + dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); + + /* Fill FIFO with Setup data for Get Device Descripto /* Fill FIFO with Setup data for Get Device Descripto + data_fifo = (uint32_t *) ((char *)global_regs + 0x100 data_fifo = (uint32_t *) ((char *)global_regs + 0x100 + dwc_write_reg32(data_fifo++, 0x01000680); dwc_write_reg32(data_fifo++, 0x01000680); + dwc_write_reg32(data_fifo++, 0x00080000); dwc_write_reg32(data_fifo++, 0x00080000); + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + + //fprintf(stderr, "Waiting for HCINTR intr 1, GINTSTS //fprintf(stderr, "Waiting for HCINTR intr 1, GINTSTS + + /* Wait for host channel interrupt */ /* Wait for host channel interrupt */ + do { do { + gintsts.d32 = dwc_read_reg32(&global_regs->gi gintsts.d32 = dwc_read_reg32(&global_regs->gi + } while (gintsts.b.hcintr == 0); } while (gintsts.b.hcintr == 0); + + //fprintf(stderr, "Got HCINTR intr 1, GINTSTS = %08x\ //fprintf(stderr, "Got HCINTR intr 1, GINTSTS = %08x\ + + /* Disable HCINTs */ /* Disable HCINTs */ + dwc_write_reg32(&hc_regs->hcintmsk, 0x0000); dwc_write_reg32(&hc_regs->hcintmsk, 0x0000); + + /* Disable HAINTs */ /* Disable HAINTs */ + dwc_write_reg32(&hc_global_regs->haintmsk, 0x0000); dwc_write_reg32(&hc_global_regs->haintmsk, 0x0000); + + /* Read HAINT */ /* Read HAINT */ + haint.d32 = dwc_read_reg32(&hc_global_regs->haint); haint.d32 = dwc_read_reg32(&hc_global_regs->haint); + + //fprintf(stderr, "HAINT: %08x\n", haint.d32); //fprintf(stderr, "HAINT: %08x\n", haint.d32); + + /* Read HCINT */ /* Read HCINT */ + hcint.d32 = dwc_read_reg32(&hc_regs->hcint); hcint.d32 = dwc_read_reg32(&hc_regs->hcint); + + //fprintf(stderr, "HCINT: %08x\n", hcint.d32); //fprintf(stderr, "HCINT: %08x\n", hcint.d32); + + /* Read HCCHAR */ /* Read HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + + //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); + + /* Clear HCINT */ /* Clear HCINT */ + dwc_write_reg32(&hc_regs->hcint, hcint.d32); dwc_write_reg32(&hc_regs->hcint, hcint.d32); + + /* Clear HAINT */ /* Clear HAINT */ + dwc_write_reg32(&hc_global_regs->haint, haint.d32); dwc_write_reg32(&hc_global_regs->haint, haint.d32); + + /* Clear GINTSTS */ /* Clear GINTSTS */ + dwc_write_reg32(&global_regs->gintsts, gintsts.d32); dwc_write_reg32(&global_regs->gintsts, gintsts.d32); + + /* Read GINTSTS */ /* Read GINTSTS */ + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); +} } + +static void do_in_ack(void) static void do_in_ack(void) +{ { + gintsts_data_t gintsts; gintsts_data_t gintsts; + hctsiz_data_t hctsiz; hctsiz_data_t hctsiz; + hcchar_data_t hcchar; hcchar_data_t hcchar; + haint_data_t haint; haint_data_t haint; + hcint_data_t hcint; hcint_data_t hcint; + host_grxsts_data_t grxsts; host_grxsts_data_t grxsts; + + /* Enable HAINTs */ /* Enable HAINTs */ + dwc_write_reg32(&hc_global_regs->haintmsk, 0x0001); dwc_write_reg32(&hc_global_regs->haintmsk, 0x0001); + + /* Enable HCINTs */ /* Enable HCINTs */ + dwc_write_reg32(&hc_regs->hcintmsk, 0x04a3); dwc_write_reg32(&hc_regs->hcintmsk, 0x04a3); + + /* Read GINTSTS */ /* Read GINTSTS */ + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); + + /* Read HAINT */ /* Read HAINT */ + haint.d32 = dwc_read_reg32(&hc_global_regs->haint); haint.d32 = dwc_read_reg32(&hc_global_regs->haint); + + //fprintf(stderr, "HAINT: %08x\n", haint.d32); //fprintf(stderr, "HAINT: %08x\n", haint.d32); + + /* Read HCINT */ /* Read HCINT */ + hcint.d32 = dwc_read_reg32(&hc_regs->hcint); hcint.d32 = dwc_read_reg32(&hc_regs->hcint); + + //fprintf(stderr, "HCINT: %08x\n", hcint.d32); //fprintf(stderr, "HCINT: %08x\n", hcint.d32); + + /* Read HCCHAR */ /* Read HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + + //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); + + /* Clear HCINT */ /* Clear HCINT */ + dwc_write_reg32(&hc_regs->hcint, hcint.d32); dwc_write_reg32(&hc_regs->hcint, hcint.d32); + + /* Clear HAINT */ /* Clear HAINT */ + dwc_write_reg32(&hc_global_regs->haint, haint.d32); dwc_write_reg32(&hc_global_regs->haint, haint.d32); + + /* Clear GINTSTS */ /* Clear GINTSTS */ + dwc_write_reg32(&global_regs->gintsts, gintsts.d32); dwc_write_reg32(&global_regs->gintsts, gintsts.d32); + + /* Read GINTSTS */ /* Read GINTSTS */ + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); + + /* /* + * Receive Control In packet * Receive Control In packet + */ */ + + /* Make sure channel is disabled */ /* Make sure channel is disabled */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + + if (hcchar.b.chen) { if (hcchar.b.chen) { + //fprintf(stderr, "Channel already enabled 2, //fprintf(stderr, "Channel already enabled 2, + hcchar.b.chdis = 1; hcchar.b.chdis = 1; + hcchar.b.chen = 1; hcchar.b.chen = 1; + dwc_write_reg32(&hc_regs->hcchar, hcchar.d32) dwc_write_reg32(&hc_regs->hcchar, hcchar.d32) + + //sleep(1); //sleep(1); + mdelay(1000); mdelay(1000); + + /* Read GINTSTS */ /* Read GINTSTS */ + gintsts.d32 = dwc_read_reg32(&global_regs->gi gintsts.d32 = dwc_read_reg32(&global_regs->gi + + //fprintf(stderr, "GINTSTS: %08x\n", gintsts. //fprintf(stderr, "GINTSTS: %08x\n", gintsts. + + /* Read HAINT */ /* Read HAINT */ + haint.d32 = dwc_read_reg32(&hc_global_regs->h haint.d32 = dwc_read_reg32(&hc_global_regs->h + + //fprintf(stderr, "HAINT: %08x\n", haint.d32) //fprintf(stderr, "HAINT: %08x\n", haint.d32) + + /* Read HCINT */ /* Read HCINT */ + hcint.d32 = dwc_read_reg32(&hc_regs->hcint); hcint.d32 = dwc_read_reg32(&hc_regs->hcint); + + //fprintf(stderr, "HCINT: %08x\n", hcint.d32) //fprintf(stderr, "HCINT: %08x\n", hcint.d32) + + /* Read HCCHAR */ /* Read HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar) hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar) + + //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d3 //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d3 + + /* Clear HCINT */ /* Clear HCINT */ + dwc_write_reg32(&hc_regs->hcint, hcint.d32); dwc_write_reg32(&hc_regs->hcint, hcint.d32); + + /* Clear HAINT */ /* Clear HAINT */ + dwc_write_reg32(&hc_global_regs->haint, haint dwc_write_reg32(&hc_global_regs->haint, haint + + /* Clear GINTSTS */ /* Clear GINTSTS */ + dwc_write_reg32(&global_regs->gintsts, gintst dwc_write_reg32(&global_regs->gintsts, gintst + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar) hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar) + + //if (hcchar.b.chen) { //if (hcchar.b.chen) { + // fprintf(stderr, "** Channel _still_ e // fprintf(stderr, "** Channel _still_ e + //} //} + } } + + /* Set HCTSIZ */ /* Set HCTSIZ */ + hctsiz.d32 = 0; hctsiz.d32 = 0; + hctsiz.b.xfersize = 8; hctsiz.b.xfersize = 8; + hctsiz.b.pktcnt = 1; hctsiz.b.pktcnt = 1; + hctsiz.b.pid = DWC_OTG_HC_PID_DATA1; hctsiz.b.pid = DWC_OTG_HC_PID_DATA1; + dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32); dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32); + + /* Set HCCHAR */ /* Set HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL; hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL; + hcchar.b.epdir = 1; hcchar.b.epdir = 1; + hcchar.b.epnum = 0; hcchar.b.epnum = 0; + hcchar.b.mps = 8; hcchar.b.mps = 8; + hcchar.b.chen = 1; hcchar.b.chen = 1; + dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + + //fprintf(stderr, "Waiting for RXSTSQLVL intr 1, GINTSTS //fprintf(stderr, "Waiting for RXSTSQLVL intr 1, GINTSTS + + /* Wait for receive status queue interrupt */ /* Wait for receive status queue interrupt */ + do { do { + gintsts.d32 = dwc_read_reg32(&global_regs->gi gintsts.d32 = dwc_read_reg32(&global_regs->gi + } while (gintsts.b.rxstsqlvl == 0); } while (gintsts.b.rxstsqlvl == 0); + + //fprintf(stderr, "Got RXSTSQLVL intr 1, GINTSTS = %08x\n //fprintf(stderr, "Got RXSTSQLVL intr 1, GINTSTS = %08x\n + + /* Read RXSTS */ /* Read RXSTS */ + grxsts.d32 = dwc_read_reg32(&global_regs->grxstsp); grxsts.d32 = dwc_read_reg32(&global_regs->grxstsp); + + //fprintf(stderr, "GRXSTS: %08x\n", grxsts.d32); //fprintf(stderr, "GRXSTS: %08x\n", grxsts.d32); + + /* Clear RXSTSQLVL in GINTSTS */ /* Clear RXSTSQLVL in GINTSTS */ + gintsts.d32 = 0; gintsts.d32 = 0; + gintsts.b.rxstsqlvl = 1; gintsts.b.rxstsqlvl = 1; + dwc_write_reg32(&global_regs->gintsts, gintsts.d32); dwc_write_reg32(&global_regs->gintsts, gintsts.d32); + switch (grxsts.b.pktsts) { switch (grxsts.b.pktsts) { + case DWC_GRXSTS_PKTSTS_IN: case DWC_GRXSTS_PKTSTS_IN: + /* Read the data into the host buffer */ /* Read the data into the host buffer */ + if (grxsts.b.bcnt > 0) { if (grxsts.b.bcnt > 0) { + int i; int i; + int word_count = (grxsts.b.bcnt + 3) int word_count = (grxsts.b.bcnt + 3) + data_fifo = (uint32_t *) ((char *)glo data_fifo = (uint32_t *) ((char *)glo + for (i = 0; i < word_count; i++) { for (i = 0; i < word_count; i++) { + (void)dwc_read_reg32(data_fif (void)dwc_read_reg32(data_fif + } } + } } + //fprintf(stderr, "Received %u bytes\n", (unsigne //fprintf(stderr, "Received %u bytes\n", (unsigne + break; break; + default: default: + //fprintf(stderr, "** Unexpected GRXSTS packet st //fprintf(stderr, "** Unexpected GRXSTS packet st + break; break; + } } + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + + //fprintf(stderr, "Waiting for RXSTSQLVL intr 2, GINTSTS //fprintf(stderr, "Waiting for RXSTSQLVL intr 2, GINTSTS + + /* Wait for receive status queue interrupt */ /* Wait for receive status queue interrupt */ + do { do { + gintsts.d32 = dwc_read_reg32(&global_regs->gi gintsts.d32 = dwc_read_reg32(&global_regs->gi + } while (gintsts.b.rxstsqlvl == 0); } while (gintsts.b.rxstsqlvl == 0); + + //fprintf(stderr, "Got RXSTSQLVL intr 2, GINTSTS = %08x\n //fprintf(stderr, "Got RXSTSQLVL intr 2, GINTSTS = %08x\n + + /* Read RXSTS */ /* Read RXSTS */ + grxsts.d32 = dwc_read_reg32(&global_regs->grxstsp); grxsts.d32 = dwc_read_reg32(&global_regs->grxstsp); + + //fprintf(stderr, "GRXSTS: %08x\n", grxsts.d32); //fprintf(stderr, "GRXSTS: %08x\n", grxsts.d32); + + /* Clear RXSTSQLVL in GINTSTS */ /* Clear RXSTSQLVL in GINTSTS */ + gintsts.d32 = 0; gintsts.d32 = 0; + gintsts.b.rxstsqlvl = 1; gintsts.b.rxstsqlvl = 1; + dwc_write_reg32(&global_regs->gintsts, gintsts.d32); dwc_write_reg32(&global_regs->gintsts, gintsts.d32); + switch (grxsts.b.pktsts) { switch (grxsts.b.pktsts) { + case DWC_GRXSTS_PKTSTS_IN_XFER_COMP: case DWC_GRXSTS_PKTSTS_IN_XFER_COMP: + break; break; + default: default: + //fprintf(stderr, "** Unexpected GRXSTS packet st //fprintf(stderr, "** Unexpected GRXSTS packet st + break; break; + } } + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + + //fprintf(stderr, "Waiting for HCINTR intr 2, GINTSTS = % //fprintf(stderr, "Waiting for HCINTR intr 2, GINTSTS = % + + /* Wait for host channel interrupt */ /* Wait for host channel interrupt */ + do { do { + gintsts.d32 = dwc_read_reg32(&global_regs->gi gintsts.d32 = dwc_read_reg32(&global_regs->gi + } while (gintsts.b.hcintr == 0); } while (gintsts.b.hcintr == 0); + + //fprintf(stderr, "Got HCINTR intr 2, GINTSTS = %08x\ //fprintf(stderr, "Got HCINTR intr 2, GINTSTS = %08x\ + + /* Read HAINT */ /* Read HAINT */ + haint.d32 = dwc_read_reg32(&hc_global_regs->haint); haint.d32 = dwc_read_reg32(&hc_global_regs->haint); + + //fprintf(stderr, "HAINT: %08x\n", haint.d32); //fprintf(stderr, "HAINT: %08x\n", haint.d32); + + /* Read HCINT */ /* Read HCINT */ + hcint.d32 = dwc_read_reg32(&hc_regs->hcint); hcint.d32 = dwc_read_reg32(&hc_regs->hcint); + + //fprintf(stderr, "HCINT: %08x\n", hcint.d32); //fprintf(stderr, "HCINT: %08x\n", hcint.d32); + + /* Read HCCHAR */ /* Read HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + + //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); + + /* Clear HCINT */ /* Clear HCINT */ + dwc_write_reg32(&hc_regs->hcint, hcint.d32); dwc_write_reg32(&hc_regs->hcint, hcint.d32); + + /* Clear HAINT */ /* Clear HAINT */ + dwc_write_reg32(&hc_global_regs->haint, haint.d32); dwc_write_reg32(&hc_global_regs->haint, haint.d32); + + /* Clear GINTSTS */ /* Clear GINTSTS */ + dwc_write_reg32(&global_regs->gintsts, gintsts.d32); dwc_write_reg32(&global_regs->gintsts, gintsts.d32); + + /* Read GINTSTS */ /* Read GINTSTS */ + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); + + // usleep(100000); // usleep(100000); + // mdelay(100); // mdelay(100); + mdelay(1); mdelay(1); + + /* /* + * Send handshake packet * Send handshake packet + */ */ + + /* Read HAINT */ /* Read HAINT */ + haint.d32 = dwc_read_reg32(&hc_global_regs->haint); haint.d32 = dwc_read_reg32(&hc_global_regs->haint); + + //fprintf(stderr, "HAINT: %08x\n", haint.d32); //fprintf(stderr, "HAINT: %08x\n", haint.d32); + + /* Read HCINT */ /* Read HCINT */ + hcint.d32 = dwc_read_reg32(&hc_regs->hcint); hcint.d32 = dwc_read_reg32(&hc_regs->hcint); + + //fprintf(stderr, "HCINT: %08x\n", hcint.d32); //fprintf(stderr, "HCINT: %08x\n", hcint.d32); + + /* Read HCCHAR */ /* Read HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + + //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); + + /* Clear HCINT */ /* Clear HCINT */ + dwc_write_reg32(&hc_regs->hcint, hcint.d32); dwc_write_reg32(&hc_regs->hcint, hcint.d32); + + /* Clear HAINT */ /* Clear HAINT */ + dwc_write_reg32(&hc_global_regs->haint, haint.d32); dwc_write_reg32(&hc_global_regs->haint, haint.d32); + + /* Clear GINTSTS */ /* Clear GINTSTS */ + dwc_write_reg32(&global_regs->gintsts, gintsts.d32); dwc_write_reg32(&global_regs->gintsts, gintsts.d32); + + /* Read GINTSTS */ /* Read GINTSTS */ + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); + + /* Make sure channel is disabled */ /* Make sure channel is disabled */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + if (hcchar.b.chen) { if (hcchar.b.chen) { + + //fprintf(stderr, "Channel already enabled 3, HCC //fprintf(stderr, "Channel already enabled 3, HCC + hcchar.b.chdis = 1; hcchar.b.chdis = 1; + hcchar.b.chen = 1; hcchar.b.chen = 1; + dwc_write_reg32(&hc_regs->hcchar, hcchar.d32) dwc_write_reg32(&hc_regs->hcchar, hcchar.d32) + + //sleep(1); //sleep(1); + mdelay(1000); mdelay(1000); + + /* Read GINTSTS */ /* Read GINTSTS */ + gintsts.d32 = dwc_read_reg32(&global_regs->gi gintsts.d32 = dwc_read_reg32(&global_regs->gi + + //fprintf(stderr, "GINTSTS: %08x\n", gintsts. //fprintf(stderr, "GINTSTS: %08x\n", gintsts. + + /* Read HAINT */ /* Read HAINT */ + haint.d32 = dwc_read_reg32(&hc_global_regs->h haint.d32 = dwc_read_reg32(&hc_global_regs->h + + //fprintf(stderr, "HAINT: %08x\n", haint.d32) //fprintf(stderr, "HAINT: %08x\n", haint.d32) + + /* Read HCINT */ /* Read HCINT */ + hcint.d32 = dwc_read_reg32(&hc_regs->hcint); hcint.d32 = dwc_read_reg32(&hc_regs->hcint); + + //fprintf(stderr, "HCINT: %08x\n", hcint.d32) //fprintf(stderr, "HCINT: %08x\n", hcint.d32) + + /* Read HCCHAR */ /* Read HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar) hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar) + + //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d3 //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d3 + + /* Clear HCINT */ /* Clear HCINT */ + dwc_write_reg32(&hc_regs->hcint, hcint.d32); dwc_write_reg32(&hc_regs->hcint, hcint.d32); + + /* Clear HAINT */ /* Clear HAINT */ + dwc_write_reg32(&hc_global_regs->haint, haint dwc_write_reg32(&hc_global_regs->haint, haint + + /* Clear GINTSTS */ /* Clear GINTSTS */ + dwc_write_reg32(&global_regs->gintsts, gintst dwc_write_reg32(&global_regs->gintsts, gintst + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar) hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar) + + //if (hcchar.b.chen) { //if (hcchar.b.chen) { + // fprintf(stderr, "** Channel _still_ e // fprintf(stderr, "** Channel _still_ e + //} //} + } } + + /* Set HCTSIZ */ /* Set HCTSIZ */ + hctsiz.d32 = 0; hctsiz.d32 = 0; + hctsiz.b.xfersize = 0; hctsiz.b.xfersize = 0; + hctsiz.b.pktcnt = 1; hctsiz.b.pktcnt = 1; + hctsiz.b.pid = DWC_OTG_HC_PID_DATA1; hctsiz.b.pid = DWC_OTG_HC_PID_DATA1; + dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32); dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32); + + /* Set HCCHAR */ /* Set HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL; hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL; + hcchar.b.epdir = 0; hcchar.b.epdir = 0; + hcchar.b.epnum = 0; hcchar.b.epnum = 0; + hcchar.b.mps = 8; hcchar.b.mps = 8; + hcchar.b.chen = 1; hcchar.b.chen = 1; + dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + + //fprintf(stderr, "Waiting for HCINTR intr 3, GINTSTS = % //fprintf(stderr, "Waiting for HCINTR intr 3, GINTSTS = % + + /* Wait for host channel interrupt */ /* Wait for host channel interrupt */ + do { do { + gintsts.d32 = dwc_read_reg32(&global_regs->gi gintsts.d32 = dwc_read_reg32(&global_regs->gi + } while (gintsts.b.hcintr == 0); } while (gintsts.b.hcintr == 0); + + //fprintf(stderr, "Got HCINTR intr 3, GINTSTS = %08x\ //fprintf(stderr, "Got HCINTR intr 3, GINTSTS = %08x\ + + /* Disable HCINTs */ /* Disable HCINTs */ + dwc_write_reg32(&hc_regs->hcintmsk, 0x0000); dwc_write_reg32(&hc_regs->hcintmsk, 0x0000); + + /* Disable HAINTs */ /* Disable HAINTs */ + dwc_write_reg32(&hc_global_regs->haintmsk, 0x0000); dwc_write_reg32(&hc_global_regs->haintmsk, 0x0000); + + /* Read HAINT */ /* Read HAINT */ + haint.d32 = dwc_read_reg32(&hc_global_regs->haint); haint.d32 = dwc_read_reg32(&hc_global_regs->haint); + + //fprintf(stderr, "HAINT: %08x\n", haint.d32); //fprintf(stderr, "HAINT: %08x\n", haint.d32); + + /* Read HCINT */ /* Read HCINT */ + hcint.d32 = dwc_read_reg32(&hc_regs->hcint); hcint.d32 = dwc_read_reg32(&hc_regs->hcint); + + //fprintf(stderr, "HCINT: %08x\n", hcint.d32); //fprintf(stderr, "HCINT: %08x\n", hcint.d32); + + /* Read HCCHAR */ /* Read HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + + //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); + + /* Clear HCINT */ /* Clear HCINT */ + dwc_write_reg32(&hc_regs->hcint, hcint.d32); dwc_write_reg32(&hc_regs->hcint, hcint.d32); + + /* Clear HAINT */ /* Clear HAINT */ + dwc_write_reg32(&hc_global_regs->haint, haint.d32); dwc_write_reg32(&hc_global_regs->haint, haint.d32); + + /* Clear GINTSTS */ /* Clear GINTSTS */ + dwc_write_reg32(&global_regs->gintsts, gintsts.d32); dwc_write_reg32(&global_regs->gintsts, gintsts.d32); + + /* Read GINTSTS */ /* Read GINTSTS */ + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); +} } + +#endif /* DWC_HS_ELECT_TST */ #endif /* DWC_HS_ELECT_TST */ + +/** Handles hub class-specific requests.*/ /** Handles hub class-specific requests.*/ +int dwc_otg_hcd_hub_control(struct usb_hcd *_hcd, u16 _typeRe int dwc_otg_hcd_hub_control(struct usb_hcd *_hcd, u16 _typeRe + u16 _wIndex, char *_buf, u16 _wLe u16 _wIndex, char *_buf, u16 _wLe +{ { + int retval = 0; int retval = 0; + dwc_otg_hcd_t * dwc_otg_hcd = hcd_to_dwc_otg_hcd(_hcd dwc_otg_hcd_t * dwc_otg_hcd = hcd_to_dwc_otg_hcd(_hcd + dwc_otg_core_if_t * core_if = hcd_to_dwc_otg_hcd(_hcd dwc_otg_core_if_t * core_if = hcd_to_dwc_otg_hcd(_hcd + struct usb_hub_descriptor *desc; struct usb_hub_descriptor *desc; + hprt0_data_t hprt0 = {.d32 = 0}; hprt0_data_t hprt0 = {.d32 = 0}; + uint32_t port_status; uint32_t port_status; + switch (_typeReq) { switch (_typeReq) { + case ClearHubFeature: case ClearHubFeature: + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL + "ClearHubFeature 0x%x\n", _wValu "ClearHubFeature 0x%x\n", _wValu + switch (_wValue) { switch (_wValue) { + case C_HUB_LOCAL_POWER: case C_HUB_LOCAL_POWER: + case C_HUB_OVER_CURRENT: case C_HUB_OVER_CURRENT: + /* Nothing required here */ /* Nothing required here */ + break; break; + default: default: + retval = -EINVAL; retval = -EINVAL; + DWC_ERROR("DWC OTG HCD - ClearHubFeat DWC_ERROR("DWC OTG HCD - ClearHubFeat + _wValue); _wValue); + } } + break; break; + case ClearPortFeature: case ClearPortFeature: + if (!_wIndex || _wIndex > 1) if (!_wIndex || _wIndex > 1) + goto error; goto error; + switch (_wValue) { switch (_wValue) { + case USB_PORT_FEAT_ENABLE: case USB_PORT_FEAT_ENABLE: + DWC_DEBUGPL(DBG_ANY, "DWC OTG HCD HUB DWC_DEBUGPL(DBG_ANY, "DWC OTG HCD HUB + "ClearPortFeature USB_PO "ClearPortFeature USB_PO + hprt0.d32 = dwc_otg_read_hprt0(core_i hprt0.d32 = dwc_otg_read_hprt0(core_i + hprt0.b.prtena = 1; hprt0.b.prtena = 1; + dwc_write_reg32(core_if->host_if->hpr dwc_write_reg32(core_if->host_if->hpr + break; break; + case USB_PORT_FEAT_SUSPEND: case USB_PORT_FEAT_SUSPEND: + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB + "ClearPortFeature USB_PO "ClearPortFeature USB_PO + hprt0.d32 = dwc_otg_read_hprt0(core_i hprt0.d32 = dwc_otg_read_hprt0(core_i + hprt0.b.prtres = 1; hprt0.b.prtres = 1; + dwc_write_reg32(core_if->host_if->hpr dwc_write_reg32(core_if->host_if->hpr + + /* Clear Resume bit */ /* Clear Resume bit */ + mdelay(100); mdelay(100); + hprt0.b.prtres = 0; hprt0.b.prtres = 0; + dwc_write_reg32(core_if->host_if->hpr dwc_write_reg32(core_if->host_if->hpr + break; break; + case USB_PORT_FEAT_POWER: case USB_PORT_FEAT_POWER: + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB + "ClearPortFeature USB_PO "ClearPortFeature USB_PO + hprt0.d32 = dwc_otg_read_hprt0(core_i hprt0.d32 = dwc_otg_read_hprt0(core_i + hprt0.b.prtpwr = 0; hprt0.b.prtpwr = 0; + dwc_write_reg32(core_if->host_if->hpr dwc_write_reg32(core_if->host_if->hpr + break; break; + case USB_PORT_FEAT_INDICATOR: case USB_PORT_FEAT_INDICATOR: + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB + "ClearPortFeature USB_PO "ClearPortFeature USB_PO + + /* Port inidicator not supported */ /* Port inidicator not supported */ + break; break; + case USB_PORT_FEAT_C_CONNECTION: case USB_PORT_FEAT_C_CONNECTION: + /* Clears drivers internal connect st /* Clears drivers internal connect st + * flag */ * flag */ + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB + "ClearPortFeature USB "ClearPortFeature USB + dwc_otg_hcd->flags.b.port_connect_sta dwc_otg_hcd->flags.b.port_connect_sta + break; break; + case USB_PORT_FEAT_C_RESET: case USB_PORT_FEAT_C_RESET: + /* Clears the driver's internal Port /* Clears the driver's internal Port + * flag */ * flag */ + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB + "ClearPortFeature USB "ClearPortFeature USB + dwc_otg_hcd->flags.b.port_reset_chang dwc_otg_hcd->flags.b.port_reset_chang + break; break; + case USB_PORT_FEAT_C_ENABLE: case USB_PORT_FEAT_C_ENABLE: + /* Clears the driver's internal Port /* Clears the driver's internal Port + * Enable/Disable Change flag */ * Enable/Disable Change flag */ + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB + "ClearPortFeature USB "ClearPortFeature USB + dwc_otg_hcd->flags.b.port_enable_chan dwc_otg_hcd->flags.b.port_enable_chan + break; break; + case USB_PORT_FEAT_C_SUSPEND: case USB_PORT_FEAT_C_SUSPEND: + /* Clears the driver's internal Port Susp /* Clears the driver's internal Port Susp + * Change flag, which is set when resume * Change flag, which is set when resume + * the host port is complete */ * the host port is complete */ + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CON DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CON + "ClearPortFeature USB "ClearPortFeature USB + dwc_otg_hcd->flags.b.port_suspend_cha dwc_otg_hcd->flags.b.port_suspend_cha + break; break; + case USB_PORT_FEAT_C_OVER_CURRENT: case USB_PORT_FEAT_C_OVER_CURRENT: + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB + "ClearPortFeature USB_PO "ClearPortFeature USB_PO + dwc_otg_hcd->flags.b.port_over_curren dwc_otg_hcd->flags.b.port_over_curren + break; break; + default: default: + retval = -EINVAL; retval = -EINVAL; + DWC_ERROR("DWC OTG HCD - " DWC_ERROR("DWC OTG HCD - " + "ClearPortFeature request "ClearPortFeature request + "unknown or unsupported\n" "unknown or unsupported\n" + } } + break; break; + case GetHubDescriptor: case GetHubDescriptor: + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL + "GetHubDescriptor\n"); "GetHubDescriptor\n"); + desc = (struct usb_hub_descriptor *)_buf; desc = (struct usb_hub_descriptor *)_buf; + desc->bDescLength = 9; desc->bDescLength = 9; + desc->bDescriptorType = 0x29; desc->bDescriptorType = 0x29; + desc->bNbrPorts = 1; desc->bNbrPorts = 1; + desc->wHubCharacteristics = 0x08; desc->wHubCharacteristics = 0x08; + desc->bPwrOn2PwrGood = 1; desc->bPwrOn2PwrGood = 1; + desc->bHubContrCurrent = 0; desc->bHubContrCurrent = 0; + desc->bitmap[0] = 0; desc->bitmap[0] = 0; + desc->bitmap[1] = 0xff; desc->bitmap[1] = 0xff; + break; break; + case GetHubStatus: case GetHubStatus: + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL + "GetHubStatus\n"); "GetHubStatus\n"); + memset(_buf, 0, 4); memset(_buf, 0, 4); + break; break; + case GetPortStatus: case GetPortStatus: + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL + "GetPortStatus\n"); "GetPortStatus\n"); + if (!_wIndex || _wIndex > 1) if (!_wIndex || _wIndex > 1) + goto error; goto error; + port_status = 0; port_status = 0; + if (dwc_otg_hcd->flags.b.port_connect_status_ if (dwc_otg_hcd->flags.b.port_connect_status_ + port_status |= (1 << USB_PORT_FEAT_C_ port_status |= (1 << USB_PORT_FEAT_C_ + if (dwc_otg_hcd->flags.b.port_enable_change) if (dwc_otg_hcd->flags.b.port_enable_change) + port_status |= (1 << USB_PORT_FEAT_C_ port_status |= (1 << USB_PORT_FEAT_C_ + if (dwc_otg_hcd->flags.b.port_suspend_change) if (dwc_otg_hcd->flags.b.port_suspend_change) + port_status |= (1 << USB_PORT_FEAT_C_ port_status |= (1 << USB_PORT_FEAT_C_ + if (dwc_otg_hcd->flags.b.port_reset_change) if (dwc_otg_hcd->flags.b.port_reset_change) + port_status |= (1 << USB_PORT_FEAT_C_ port_status |= (1 << USB_PORT_FEAT_C_ + if (dwc_otg_hcd->flags.b.port_over_current_ch if (dwc_otg_hcd->flags.b.port_over_current_ch + DWC_ERROR("Device Not Supported\n"); DWC_ERROR("Device Not Supported\n"); + port_status |= (1 << USB_PORT_FEAT_C_ port_status |= (1 << USB_PORT_FEAT_C_ + } } + if (!dwc_otg_hcd->flags.b.port_connect_status if (!dwc_otg_hcd->flags.b.port_connect_status + /* /* + * The port is disconnected, which means * The port is disconnected, which means + * either in device mode or it soon will * either in device mode or it soon will + * return 0's for the remainder of the po * return 0's for the remainder of the po + * since the port register can't be read * since the port register can't be read + * is in device mode. * is in device mode. + */ */ + *((__le32 *) _buf) = cpu_to_le32(port_sta *((__le32 *) _buf) = cpu_to_le32(port_sta + break; break; + } } + hprt0.d32 = dwc_read_reg32(core_if->host_if-> hprt0.d32 = dwc_read_reg32(core_if->host_if-> + DWC_DEBUGPL(DBG_HCDV, " HPRT0: 0x%08x\n", hp DWC_DEBUGPL(DBG_HCDV, " HPRT0: 0x%08x\n", hp + if (hprt0.b.prtconnsts) if (hprt0.b.prtconnsts) + port_status |= (1 << USB_PORT_FEAT_CO port_status |= (1 << USB_PORT_FEAT_CO + if (hprt0.b.prtena) if (hprt0.b.prtena) + port_status |= (1 << USB_PORT_FEAT_EN port_status |= (1 << USB_PORT_FEAT_EN + if (hprt0.b.prtsusp) if (hprt0.b.prtsusp) + port_status |= (1 << USB_PORT_FEAT_SU port_status |= (1 << USB_PORT_FEAT_SU + if (hprt0.b.prtovrcurract) if (hprt0.b.prtovrcurract) + port_status |= (1 << USB_PORT_FEAT_OV port_status |= (1 << USB_PORT_FEAT_OV + if (hprt0.b.prtrst) if (hprt0.b.prtrst) + port_status |= (1 << USB_PORT_FEAT_RE port_status |= (1 << USB_PORT_FEAT_RE + if (hprt0.b.prtpwr) if (hprt0.b.prtpwr) + port_status |= (1 << USB_PORT_FEAT_PO port_status |= (1 << USB_PORT_FEAT_PO + if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_S if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_S + port_status |= USB_PORT_STAT_HIGH_SPE | port_status |= (1 << USB_PORT_FEAT_HI + + else if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_L else if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_L + port_status |= (1 << USB_PORT_FEAT_LO port_status |= (1 << USB_PORT_FEAT_LO + if (hprt0.b.prttstctl) if (hprt0.b.prttstctl) + port_status |= (1 << USB_PORT_FEAT_TE port_status |= (1 << USB_PORT_FEAT_TE + + /* USB_PORT_FEAT_INDICATOR unsupported always 0 * /* USB_PORT_FEAT_INDICATOR unsupported always 0 * + *((__le32 *) _buf) = cpu_to_le32(port_status); *((__le32 *) _buf) = cpu_to_le32(port_status); + break; break; + case SetHubFeature: case SetHubFeature: + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL + "SetHubFeature\n"); "SetHubFeature\n"); + + /* No HUB features supported */ /* No HUB features supported */ + break; break; + case SetPortFeature: case SetPortFeature: + if (_wValue != USB_PORT_FEAT_TEST && (!_wInde if (_wValue != USB_PORT_FEAT_TEST && (!_wInde + goto error; goto error; + if (!dwc_otg_hcd->flags.b.port_connect_status if (!dwc_otg_hcd->flags.b.port_connect_status + /* /* + * The port is disconnected, which means * The port is disconnected, which means + * either in device mode or it soon will * either in device mode or it soon will + * return without doing anything since th * return without doing anything since th + * register can't be written if the core * register can't be written if the core + * mode. * mode. + */ */ + break; break; + } } + switch (_wValue) { switch (_wValue) { + case USB_PORT_FEAT_SUSPEND: case USB_PORT_FEAT_SUSPEND: + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB + "SetPortFeature - USB_PO "SetPortFeature - USB_PO + if (_hcd->self.otg_port == _wIndex if (_hcd->self.otg_port == _wIndex + && _hcd->self.b_hnp_enable) { && _hcd->self.b_hnp_enable) { + gotgctl_data_t gotgctl = {.d3 gotgctl_data_t gotgctl = {.d3 + gotgctl.b.hstsethnpen = 1; gotgctl.b.hstsethnpen = 1; + dwc_modify_reg32(&core_if->co dwc_modify_reg32(&core_if->co + gotgctl, 0, gotgctl, 0, + core_if->op_state = A_SUSPEND core_if->op_state = A_SUSPEND + } } + hprt0.d32 = dwc_otg_read_hprt0(core_i hprt0.d32 = dwc_otg_read_hprt0(core_i + hprt0.b.prtsusp = 1; hprt0.b.prtsusp = 1; + dwc_write_reg32(core_if->host_if->hpr dwc_write_reg32(core_if->host_if->hpr + + //DWC_PRINT( "SUSPEND: HPRT0=%0x\n", hprt //DWC_PRINT( "SUSPEND: HPRT0=%0x\n", hprt + /* Suspend the Phy Clock */ /* Suspend the Phy Clock */ + { { + pcgcctl_data_t pcgcctl = {.d3 pcgcctl_data_t pcgcctl = {.d3 + pcgcctl.b.stoppclk = 1; pcgcctl.b.stoppclk = 1; + dwc_write_reg32(core_if->pcgc dwc_write_reg32(core_if->pcgc + } } + + /* For HNP the bus must be suspended for /* For HNP the bus must be suspended for + if (_hcd->self.b_hnp_enable) { if (_hcd->self.b_hnp_enable) { + mdelay(200); mdelay(200); + + //DWC_PRINT( "SUSPEND: wait compl //DWC_PRINT( "SUSPEND: wait compl + } } + break; break; + case USB_PORT_FEAT_POWER: case USB_PORT_FEAT_POWER: + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB + "SetPortFeature - USB_PO "SetPortFeature - USB_PO + hprt0.d32 = dwc_otg_read_hprt0(core_i hprt0.d32 = dwc_otg_read_hprt0(core_i + hprt0.b.prtpwr = 1; hprt0.b.prtpwr = 1; + dwc_write_reg32(core_if->host_if->hpr dwc_write_reg32(core_if->host_if->hpr + break; break; + case USB_PORT_FEAT_RESET: case USB_PORT_FEAT_RESET: + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB + "SetPortFeature - USB_PO "SetPortFeature - USB_PO + hprt0.d32 = dwc_otg_read_hprt0(core_i hprt0.d32 = dwc_otg_read_hprt0(core_i + + /* When B-Host the Port reset bit is set /* When B-Host the Port reset bit is set + * the Start HCD Callback function, so th * the Start HCD Callback function, so th + * the reset is started within 1ms of the * the reset is started within 1ms of the + * success interrupt. */ * success interrupt. */ + if (!_hcd->self.is_b_host) { if (!_hcd->self.is_b_host) { + hprt0.b.prtrst = 1; hprt0.b.prtrst = 1; + dwc_write_reg32(core_if->host dwc_write_reg32(core_if->host + } } + + /* Clear reset bit in 10ms (FS/LS) or 50m /* Clear reset bit in 10ms (FS/LS) or 50m + MDELAY(60); | MDELAY(60); + hprt0.b.prtrst = 0; hprt0.b.prtrst = 0; + dwc_write_reg32(core_if->host_if->hpr dwc_write_reg32(core_if->host_if->hpr + break; break; + +#ifdef DWC_HS_ELECT_TST #ifdef DWC_HS_ELECT_TST + case USB_PORT_FEAT_TEST: case USB_PORT_FEAT_TEST: + { { + uint32_t t; uint32_t t; + gintmsk_data_t gintmsk; gintmsk_data_t gintmsk; + t = (_wIndex >> 8); /* MS t = (_wIndex >> 8); /* MS + DWC_DEBUGPL(DBG_HCD, DWC_DEBUGPL(DBG_HCD, + "DWC OTG HCD HUB "DWC OTG HCD HUB + "SetPortFeature "SetPortFeature + t); t); + warn("USB_PORT_FEAT_TEST %d\n warn("USB_PORT_FEAT_TEST %d\n + if (t < 6) { if (t < 6) { + hprt0.d32 = dwc_otg_r hprt0.d32 = dwc_otg_r + hprt0.b.prttstctl = t hprt0.b.prttstctl = t + dwc_write_reg32(core_ dwc_write_reg32(core_ + } else { } else { + /* Setup global vars with /* Setup global vars with + * dirty hack, should be * dirty hack, should be + */ */ + global_regs = core_if->co global_regs = core_if->co + hc_global_regs = core hc_global_regs = core + hc_regs = (dwc_otg_hc hc_regs = (dwc_otg_hc + data_fifo = (uint32_t data_fifo = (uint32_t + if (t == 6) { /* HS if (t == 6) { /* HS + /* Save curre /* Save curre + gintmsk.d32 = gintmsk.d32 = + + /* Disable al /* Disable al + * the hardwa * the hardwa + */ */ + dwc_write_reg dwc_write_reg + + /* 15 second /* 15 second + mdelay(15000) mdelay(15000) + + /* Drive susp /* Drive susp + hprt0.d32 = d hprt0.d32 = d + hprt0.b.prtsu hprt0.b.prtsu + hprt0.b.prtre hprt0.b.prtre + dwc_write_reg dwc_write_reg + + /* 15 second /* 15 second + mdelay(15000) mdelay(15000) + + /* Drive resu /* Drive resu + hprt0.d32 = d hprt0.d32 = d + hprt0.b.prtsu hprt0.b.prtsu + hprt0.b.prtre hprt0.b.prtre + dwc_write_reg dwc_write_reg + mdelay(100); mdelay(100); + + /* Clear the /* Clear the + hprt0.b.prtre hprt0.b.prtre + dwc_write_reg dwc_write_reg + + /* Restore interr /* Restore interr + dwc_write_reg32(& dwc_write_reg32(& + } else if (t == 7) { } else if (t == 7) { + /* Save curre /* Save curre + gintmsk.d32 = gintmsk.d32 = + + /* Disable al /* Disable al + * the hardwa * the hardwa + */ */ + dwc_write_reg dwc_write_reg + + /* 15 second /* 15 second + mdelay(15000) mdelay(15000) + + /* Send the S /* Send the S + do_setup(); do_setup(); + + /* 15 second /* 15 second + mdelay(15000) mdelay(15000) + + /* Restore in /* Restore in + dwc_write_reg dwc_write_reg + } else if (t == 8) { } else if (t == 8) { + /* Save curre /* Save curre + gintmsk.d32 = gintmsk.d32 = + + /* Disable al /* Disable al + * the hardwa * the hardwa + */ */ + dwc_write_reg dwc_write_reg + + /* Send the S /* Send the S + do_setup(); do_setup(); + + /* 15 second /* 15 second + mdelay(15000) mdelay(15000) + + /* Send the I /* Send the I + do_in_ack(); do_in_ack(); + + /* 15 second /* 15 second + mdelay(15000) mdelay(15000) + + /* Restore in /* Restore in + dwc_write_reg dwc_write_reg + } } + } } + break; break; + } } + +#endif /* DWC_HS_ELECT_TST */ #endif /* DWC_HS_ELECT_TST */ + case USB_PORT_FEAT_INDICATOR: case USB_PORT_FEAT_INDICATOR: + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB + "SetPortFeature - USB_PO "SetPortFeature - USB_PO + /* Not supported */ /* Not supported */ + break; break; + default: default: + retval = -EINVAL; retval = -EINVAL; + DWC_ERROR("DWC OTG HCD - " DWC_ERROR("DWC OTG HCD - " + "SetPortFeature request %x "SetPortFeature request %x + "unknown or unsupported\n" "unknown or unsupported\n" + break; break; + } } + break; break; + default: default: + error:retval = -EINVAL; error:retval = -EINVAL; + DWC_WARN("DWC OTG HCD - " DWC_WARN("DWC OTG HCD - " + "Unknown hub control request type o "Unknown hub control request type o + _typeReq, _wIndex, _wValue); _typeReq, _wIndex, _wValue); + break; break; + } } + return retval; return retval; +} } + + +/** /** + * Assigns transactions from a QTD to a free host channel and * Assigns transactions from a QTD to a free host channel and + * host channel to perform the transactions. The host channel * host channel to perform the transactions. The host channel + * the free list. * the free list. + * * + * @param _hcd The HCD state structure. * @param _hcd The HCD state structure. + * @param _qh Transactions from the first QTD for this QH are * @param _qh Transactions from the first QTD for this QH are + * assigned to a free host channel. * assigned to a free host channel. + */ */ +static void assign_and_init_hc(dwc_otg_hcd_t * _hcd, dwc_otg_ static void assign_and_init_hc(dwc_otg_hcd_t * _hcd, dwc_otg_ +{ { + dwc_hc_t * hc; dwc_hc_t * hc; + dwc_otg_qtd_t * qtd; dwc_otg_qtd_t * qtd; + struct urb *urb; struct urb *urb; + DWC_DEBUGPL(DBG_HCDV, "%s(%p,%p)\n", __func__, _hcd, DWC_DEBUGPL(DBG_HCDV, "%s(%p,%p)\n", __func__, _hcd, + hc = list_entry(_hcd->free_hc_list.next, dwc_hc_t, hc hc = list_entry(_hcd->free_hc_list.next, dwc_hc_t, hc + + /* Remove the host channel from the free list. */ /* Remove the host channel from the free list. */ + list_del_init(&hc->hc_list_entry); list_del_init(&hc->hc_list_entry); + qtd = list_entry(_qh->qtd_list.next, dwc_otg_qtd_t, q qtd = list_entry(_qh->qtd_list.next, dwc_otg_qtd_t, q + urb = qtd->urb; urb = qtd->urb; + _qh->channel = hc; _qh->channel = hc; + _qh->qtd_in_process = qtd; _qh->qtd_in_process = qtd; + + /* /* + * Use usb_pipedevice to determine device address. Th * Use usb_pipedevice to determine device address. Th + * 0 before the SET_ADDRESS command and the correct a * 0 before the SET_ADDRESS command and the correct a + */ */ + hc->dev_addr = usb_pipedevice(urb->pipe); hc->dev_addr = usb_pipedevice(urb->pipe); + hc->ep_num = usb_pipeendpoint(urb->pipe); hc->ep_num = usb_pipeendpoint(urb->pipe); + if (urb->dev->speed == USB_SPEED_LOW) { if (urb->dev->speed == USB_SPEED_LOW) { + hc->speed = DWC_OTG_EP_SPEED_LOW; hc->speed = DWC_OTG_EP_SPEED_LOW; + } else if (urb->dev->speed == USB_SPEED_FULL) { } else if (urb->dev->speed == USB_SPEED_FULL) { + hc->speed = DWC_OTG_EP_SPEED_FULL; hc->speed = DWC_OTG_EP_SPEED_FULL; + } else { } else { + hc->speed = DWC_OTG_EP_SPEED_HIGH; hc->speed = DWC_OTG_EP_SPEED_HIGH; + } } + hc->max_packet = dwc_max_packet(_qh->maxp); hc->max_packet = dwc_max_packet(_qh->maxp); + hc->xfer_started = 0; hc->xfer_started = 0; + hc->halt_status = DWC_OTG_HC_XFER_NO_HALT_STATUS; hc->halt_status = DWC_OTG_HC_XFER_NO_HALT_STATUS; + hc->error_state = (qtd->error_count > 0); hc->error_state = (qtd->error_count > 0); + hc->halt_on_queue = 0; hc->halt_on_queue = 0; + hc->halt_pending = 0; hc->halt_pending = 0; + hc->requests = 0; hc->requests = 0; + + /* /* + * The following values may be modified in the transf * The following values may be modified in the transf + * below. The xfer_len value may be reduced when the * below. The xfer_len value may be reduced when the + * started to accommodate the max widths of the XferS * started to accommodate the max widths of the XferS + * fields in the HCTSIZn register. * fields in the HCTSIZn register. + */ */ + hc->do_ping = _qh->ping_state; hc->do_ping = _qh->ping_state; + hc->ep_is_in = (usb_pipein(urb->pipe) != 0); hc->ep_is_in = (usb_pipein(urb->pipe) != 0); + hc->data_pid_start = _qh->data_toggle; hc->data_pid_start = _qh->data_toggle; + hc->multi_count = 1; hc->multi_count = 1; + if (_hcd->core_if->dma_enable) { if (_hcd->core_if->dma_enable) { + hc->xfer_buff = hc->xfer_buff = + (uint8_t *)(u32)urb->transfer_dma + u (uint8_t *)(u32)urb->transfer_dma + u + } else { } else { + hc->xfer_buff = hc->xfer_buff = + (uint8_t *) urb->transfer_buffer + urb->a (uint8_t *) urb->transfer_buffer + urb->a + } } + hc->xfer_len = urb->transfer_buffer_length - urb->act hc->xfer_len = urb->transfer_buffer_length - urb->act + hc->xfer_count = 0; hc->xfer_count = 0; + + /* /* + * Set the split attributes * Set the split attributes + */ */ + hc->do_split = 0; hc->do_split = 0; + if (_qh->do_split) { if (_qh->do_split) { + hc->do_split = 1; hc->do_split = 1; + hc->xact_pos = qtd->isoc_split_pos; hc->xact_pos = qtd->isoc_split_pos; + hc->complete_split = qtd->complete_split; hc->complete_split = qtd->complete_split; + hc->hub_addr = urb->dev->tt->hub->devnum; hc->hub_addr = urb->dev->tt->hub->devnum; + hc->port_addr = urb->dev->ttport; hc->port_addr = urb->dev->ttport; + } } + switch (usb_pipetype(urb->pipe)) { switch (usb_pipetype(urb->pipe)) { + case PIPE_CONTROL: case PIPE_CONTROL: + hc->ep_type = DWC_OTG_EP_TYPE_CONTROL; hc->ep_type = DWC_OTG_EP_TYPE_CONTROL; + switch (qtd->control_phase) { switch (qtd->control_phase) { + case DWC_OTG_CONTROL_SETUP: case DWC_OTG_CONTROL_SETUP: + DWC_DEBUGPL(DBG_HCDV, " Control setu DWC_DEBUGPL(DBG_HCDV, " Control setu + hc->do_ping = 0; hc->do_ping = 0; + hc->ep_is_in = 0; hc->ep_is_in = 0; + hc->data_pid_start = DWC_OTG_HC_PID_S hc->data_pid_start = DWC_OTG_HC_PID_S + if (_hcd->core_if->dma_enable) { if (_hcd->core_if->dma_enable) { + hc->xfer_buff = (uint8_t *)(u hc->xfer_buff = (uint8_t *)(u + } else { } else { + hc->xfer_buff = (uint8_t *) u hc->xfer_buff = (uint8_t *) u + } } + hc->xfer_len = 8; hc->xfer_len = 8; + break; break; + case DWC_OTG_CONTROL_DATA: case DWC_OTG_CONTROL_DATA: + DWC_DEBUGPL(DBG_HCDV, " Control data DWC_DEBUGPL(DBG_HCDV, " Control data + hc->data_pid_start = qtd->data_toggle hc->data_pid_start = qtd->data_toggle + break; break; + case DWC_OTG_CONTROL_STATUS: case DWC_OTG_CONTROL_STATUS: + + /* /* + * Direction is opposite of data dire * Direction is opposite of data dire + * data. * data. + */ */ + DWC_DEBUGPL(DBG_HCDV, DWC_DEBUGPL(DBG_HCDV, + " Control status tra " Control status tra + if (urb->transfer_buffer_length == 0) if (urb->transfer_buffer_length == 0) + hc->ep_is_in = 1; hc->ep_is_in = 1; + } else { } else { + hc->ep_is_in = (usb_pipein(ur hc->ep_is_in = (usb_pipein(ur + } } + if (hc->ep_is_in) { if (hc->ep_is_in) { + hc->do_ping = 0; hc->do_ping = 0; + } } + hc->data_pid_start = DWC_OTG_HC_PID_D hc->data_pid_start = DWC_OTG_HC_PID_D + hc->xfer_len = 0; hc->xfer_len = 0; + if (_hcd->core_if->dma_enable) { if (_hcd->core_if->dma_enable) { + hc->xfer_buff = (uint8_t *)(u hc->xfer_buff = (uint8_t *)(u + } else { } else { + hc->xfer_buff = (uint8_t *) _ hc->xfer_buff = (uint8_t *) _ + } } + break; break; + } } + break; break; + case PIPE_BULK: case PIPE_BULK: + hc->ep_type = DWC_OTG_EP_TYPE_BULK; hc->ep_type = DWC_OTG_EP_TYPE_BULK; + break; break; + case PIPE_INTERRUPT: case PIPE_INTERRUPT: + hc->ep_type = DWC_OTG_EP_TYPE_INTR; hc->ep_type = DWC_OTG_EP_TYPE_INTR; + break; break; + case PIPE_ISOCHRONOUS: case PIPE_ISOCHRONOUS: + { { + struct usb_iso_packet_descriptor *fra struct usb_iso_packet_descriptor *fra + frame_desc = &urb->iso_frame_desc[qtd frame_desc = &urb->iso_frame_desc[qtd + hc->ep_type = DWC_OTG_EP_TYPE_ISOC; hc->ep_type = DWC_OTG_EP_TYPE_ISOC; + if (_hcd->core_if->dma_enable) { if (_hcd->core_if->dma_enable) { + hc->xfer_buff = (uint8_t *)(u hc->xfer_buff = (uint8_t *)(u + } else { } else { + hc->xfer_buff = (uint8_t *) u hc->xfer_buff = (uint8_t *) u + } } + hc->xfer_buff += frame_desc->offset + hc->xfer_buff += frame_desc->offset + + hc->xfer_len = frame_desc->length - q hc->xfer_len = frame_desc->length - q + if (hc->xact_pos == DWC_HCSPLIT_XACTP if (hc->xact_pos == DWC_HCSPLIT_XACTP + if (hc->xfer_len <= 188) { if (hc->xfer_len <= 188) { + hc->xact_pos = DWC_HC hc->xact_pos = DWC_HC + } else { } else { + hc->xact_pos = DWC_HC hc->xact_pos = DWC_HC + } } + } } + } } + break; break; + } } + + if (hc->ep_type == DWC_OTG_EP_TYPE_INTR if (hc->ep_type == DWC_OTG_EP_TYPE_INTR + || hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { || hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { + /* /* + * This value may be modified when the transf * This value may be modified when the transf + * reflect the actual transfer length. * reflect the actual transfer length. + */ */ + hc->multi_count = dwc_hb_mult(_qh->maxp); hc->multi_count = dwc_hb_mult(_qh->maxp); + } } + dwc_otg_hc_init(_hcd->core_if, hc); dwc_otg_hc_init(_hcd->core_if, hc); + hc->qh = _qh; hc->qh = _qh; +} } + + +/** /** + * This function selects transactions from the HCD transfer s * This function selects transactions from the HCD transfer s + * assigns them to available host channels. It is called from * assigns them to available host channels. It is called from + * handler functions. * handler functions. + * * + * @param _hcd The HCD state structure. * @param _hcd The HCD state structure. + * * + * @return The types of new transactions that were assigned t * @return The types of new transactions that were assigned t + */ */ +dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dw dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dw +{ { + struct list_head *qh_ptr; struct list_head *qh_ptr; + dwc_otg_qh_t * qh; dwc_otg_qh_t * qh; + int num_channels; int num_channels; + unsigned long flags; < + dwc_otg_transaction_type_e ret_val = DWC_OTG_TRANSACT dwc_otg_transaction_type_e ret_val = DWC_OTG_TRANSACT + +#ifdef DEBUG_SOF #ifdef DEBUG_SOF + DWC_DEBUGPL(DBG_HCD, " Select Transactions\n"); DWC_DEBUGPL(DBG_HCD, " Select Transactions\n"); +#endif /* */ #endif /* */ + + /* Process entries in the periodic ready list. */ /* Process entries in the periodic ready list. */ + num_channels = _hcd->core_if->core_params->host_chann < + qh_ptr = _hcd->periodic_sched_ready.next; qh_ptr = _hcd->periodic_sched_ready.next; + while (qh_ptr != &_hcd->periodic_sched_ready while (qh_ptr != &_hcd->periodic_sched_ready + && !list_empty(&_hcd->free_hc_list)) { && !list_empty(&_hcd->free_hc_list)) { + < + // Make sure we leave one channel for non per < + local_irq_save(flags); < + if (_hcd->available_host_channels <= 1) { < + local_irq_restore(flags); < + break; < + } < + _hcd->available_host_channels--; < + local_irq_restore(flags); < + < + qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list + assign_and_init_hc(_hcd, qh); assign_and_init_hc(_hcd, qh); + /* /* + * Move the QH from the periodic ready schedu * Move the QH from the periodic ready schedu + * periodic assigned schedule. * periodic assigned schedule. + */ */ + qh_ptr = qh_ptr->next; qh_ptr = qh_ptr->next; + local_irq_save(flags); < + list_move(&qh->qh_list_entry, &_hcd->periodic list_move(&qh->qh_list_entry, &_hcd->periodic + local_irq_restore(flags); < + ret_val = DWC_OTG_TRANSACTION_PERIODIC; ret_val = DWC_OTG_TRANSACTION_PERIODIC; + } } + /* /* + * Process entries in the deferred portion of the non * Process entries in the deferred portion of the non + * A NAK put them here and, at the right time, they n * A NAK put them here and, at the right time, they n + * placed on the sched_inactive list. * placed on the sched_inactive list. + */ */ + qh_ptr = _hcd->non_periodic_sched_deferred.next; qh_ptr = _hcd->non_periodic_sched_deferred.next; + while (qh_ptr != &_hcd->non_periodic_sched_deferred) while (qh_ptr != &_hcd->non_periodic_sched_deferred) + uint16_t frame_number = uint16_t frame_number = + dwc_otg_hcd_get_frame_number(dwc_otg_ dwc_otg_hcd_get_frame_number(dwc_otg_ + > unsigned long flags; + qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list + qh_ptr = qh_ptr->next; qh_ptr = qh_ptr->next; + + if (dwc_frame_num_le(qh->sched_frame, frame_n if (dwc_frame_num_le(qh->sched_frame, frame_n + // NAK did this // NAK did this + /* /* + * Move the QH from the non periodic * Move the QH from the non periodic + * the non periodic inactive schedule * the non periodic inactive schedule + */ */ + local_irq_save(flags); local_irq_save(flags); + list_move(&qh->qh_list_entry, list_move(&qh->qh_list_entry, + &_hcd->non_periodic_sched_i &_hcd->non_periodic_sched_i + local_irq_restore(flags); local_irq_restore(flags); + } } + } } + + /* /* + * Process entries in the inactive portion of the non * Process entries in the inactive portion of the non + * schedule. Some free host channels may not be used * schedule. Some free host channels may not be used + * reserved for periodic transfers. * reserved for periodic transfers. + */ */ + qh_ptr = _hcd->non_periodic_sched_inactive.next; qh_ptr = _hcd->non_periodic_sched_inactive.next; + num_channels = _hcd->core_if->core_params->host_chann num_channels = _hcd->core_if->core_params->host_chann + while (qh_ptr != &_hcd->non_periodic_sched_inactive | while (qh_ptr != &_hcd->non_periodic_sched_inactive & + > (_hcd->non_periodic_channels < + > num_channels - _hcd->periodic_channels) + && !list_empty(&_hcd->free_hc_list)) { && !list_empty(&_hcd->free_hc_list)) { + < + local_irq_save(flags); < + if (_hcd->available_host_channels < 1) { < + local_irq_restore(flags); < + break; < + } < + _hcd->available_host_channels--; < + local_irq_restore(flags); < + < + qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list + assign_and_init_hc(_hcd, qh); assign_and_init_hc(_hcd, qh); + + /* /* + * Move the QH from the non-periodic inactive * Move the QH from the non-periodic inactive + * non-periodic active schedule. * non-periodic active schedule. + */ */ + qh_ptr = qh_ptr->next; qh_ptr = qh_ptr->next; + local_irq_save(flags); < + list_move(&qh->qh_list_entry, list_move(&qh->qh_list_entry, + &_hcd->non_periodic_sched_active); &_hcd->non_periodic_sched_active); + local_irq_restore(flags); < + if (ret_val == DWC_OTG_TRANSACTION_NONE) { if (ret_val == DWC_OTG_TRANSACTION_NONE) { + ret_val = DWC_OTG_TRANSACTION_NON_PER ret_val = DWC_OTG_TRANSACTION_NON_PER + } else { } else { + ret_val = DWC_OTG_TRANSACTION_ALL; ret_val = DWC_OTG_TRANSACTION_ALL; + } } + > _hcd->non_periodic_channels++; + } } + return ret_val; return ret_val; +} } + +/** /** + * Attempts to queue a single transaction request for a host * Attempts to queue a single transaction request for a host + * associated with either a periodic or non-periodic transfer * associated with either a periodic or non-periodic transfer + * assumes that there is space available in the appropriate r * assumes that there is space available in the appropriate r + * an OUT transfer or SETUP transaction in Slave mode, it che * an OUT transfer or SETUP transaction in Slave mode, it che + * is available in the appropriate Tx FIFO. * is available in the appropriate Tx FIFO. + * * + * @param _hcd The HCD state structure. * @param _hcd The HCD state structure. + * @param _hc Host channel descriptor associated with either * @param _hc Host channel descriptor associated with either + * non-periodic transfer. * non-periodic transfer. + * @param _fifo_dwords_avail Number of DWORDs available in th * @param _fifo_dwords_avail Number of DWORDs available in th + * FIFO for periodic transfers or the non-periodic Tx FIFO fo * FIFO for periodic transfers or the non-periodic Tx FIFO fo + * transfers. * transfers. + * * + * @return 1 if a request is queued and more requests may be * @return 1 if a request is queued and more requests may be + * complete the transfer, 0 if no more requests are required * complete the transfer, 0 if no more requests are required + * transfer, -1 if there is insufficient space in the Tx FIFO * transfer, -1 if there is insufficient space in the Tx FIFO + */ */ +static int queue_transaction(dwc_otg_hcd_t * _hcd, static int queue_transaction(dwc_otg_hcd_t * _hcd, + dwc_hc_t * _hc, uint16_t _fifo_ dwc_hc_t * _hc, uint16_t _fifo_ +{ { + int retval; int retval; + if (_hcd->core_if->dma_enable) { if (_hcd->core_if->dma_enable) { + if (!_hc->xfer_started) { if (!_hc->xfer_started) { + dwc_otg_hc_start_transfer(_hcd->core_ dwc_otg_hc_start_transfer(_hcd->core_ + _hc->qh->ping_state = 0; _hc->qh->ping_state = 0; + } } + retval = 0; retval = 0; + } else if (_hc->halt_pending) { } else if (_hc->halt_pending) { + /* Don't queue a request if the channel has b /* Don't queue a request if the channel has b + retval = 0; retval = 0; + } else if (_hc->halt_on_queue) { } else if (_hc->halt_on_queue) { + dwc_otg_hc_halt(_hcd->core_if, _hc, _hc->halt dwc_otg_hc_halt(_hcd->core_if, _hc, _hc->halt + retval = 0; retval = 0; + } else if (_hc->do_ping) { } else if (_hc->do_ping) { + if (!_hc->xfer_started) { if (!_hc->xfer_started) { + dwc_otg_hc_start_transfer(_hcd->core_ dwc_otg_hc_start_transfer(_hcd->core_ + } } + retval = 0; retval = 0; + } else if (!_hc->ep_is_in || _hc->data_pid_start == D } else if (!_hc->ep_is_in || _hc->data_pid_start == D + if ((_fifo_dwords_avail * 4) >= _hc->max_pack if ((_fifo_dwords_avail * 4) >= _hc->max_pack + if (!_hc->xfer_started) { if (!_hc->xfer_started) { + dwc_otg_hc_start_transfer(_hc dwc_otg_hc_start_transfer(_hc + retval = 1; retval = 1; + } else { } else { + retval = dwc_otg_hc_continue_ retval = dwc_otg_hc_continue_ + } } + } else { } else { + retval = -1; retval = -1; + } } + } else { } else { + if (!_hc->xfer_started) { if (!_hc->xfer_started) { + dwc_otg_hc_start_transfer(_hcd->core_ dwc_otg_hc_start_transfer(_hcd->core_ + retval = 1; retval = 1; + } else { } else { + retval = dwc_otg_hc_continue_transfer retval = dwc_otg_hc_continue_transfer + } } + } } + return retval; return retval; +} } + + +/** /** + * Processes active non-periodic channels and queues transact * Processes active non-periodic channels and queues transact + * channels to the DWC_otg controller. After queueing transac * channels to the DWC_otg controller. After queueing transac + * FIFO Empty interrupt is enabled if there are more transact * FIFO Empty interrupt is enabled if there are more transact + * NP Tx FIFO or request queue space becomes available. Other * NP Tx FIFO or request queue space becomes available. Other + * FIFO Empty interrupt is disabled. * FIFO Empty interrupt is disabled. + */ */ +static void process_non_periodic_channels(dwc_otg_hcd_t * _hc static void process_non_periodic_channels(dwc_otg_hcd_t * _hc +{ { + gnptxsts_data_t tx_status; gnptxsts_data_t tx_status; + struct list_head *orig_qh_ptr; struct list_head *orig_qh_ptr; + dwc_otg_qh_t * qh; dwc_otg_qh_t * qh; + int status; int status; + int no_queue_space = 0; int no_queue_space = 0; + int no_fifo_space = 0; int no_fifo_space = 0; + int more_to_do = 0; int more_to_do = 0; + dwc_otg_core_global_regs_t * global_regs = dwc_otg_core_global_regs_t * global_regs = + _hcd->core_if->core_global_regs; _hcd->core_if->core_global_regs; + DWC_DEBUGPL(DBG_HCDV, "Queue non-periodic transaction DWC_DEBUGPL(DBG_HCDV, "Queue non-periodic transaction + +#ifdef CONFIG_DWC_DEBUG | #ifdef DEBUG + tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts + DWC_DEBUGPL(DBG_HCDV, " NP Tx Req Queue Space Avail DWC_DEBUGPL(DBG_HCDV, " NP Tx Req Queue Space Avail + tx_status.b.nptxqspcavail); tx_status.b.nptxqspcavail); + DWC_DEBUGPL(DBG_HCDV, " NP Tx FIFO Space Avail (befo DWC_DEBUGPL(DBG_HCDV, " NP Tx FIFO Space Avail (befo + tx_status.b.nptxfspcavail); tx_status.b.nptxfspcavail); +#endif /* */ #endif /* */ + /* /* + * Keep track of the starting point. Skip over the st * Keep track of the starting point. Skip over the st + * entry. * entry. + */ */ + if (_hcd->non_periodic_qh_ptr == &_hcd->non_periodic_ if (_hcd->non_periodic_qh_ptr == &_hcd->non_periodic_ + _hcd->non_periodic_qh_ptr = _hcd->non_periodi _hcd->non_periodic_qh_ptr = _hcd->non_periodi + } } + orig_qh_ptr = _hcd->non_periodic_qh_ptr; orig_qh_ptr = _hcd->non_periodic_qh_ptr; + + /* /* + * Process once through the active list or until no m * Process once through the active list or until no m + * available in the request queue or the Tx FIFO. * available in the request queue or the Tx FIFO. + */ */ + do { do { + + tx_status.d32 = dwc_read_reg32(&global_regs-> tx_status.d32 = dwc_read_reg32(&global_regs-> + if (!_hcd->core_if->dma_enable if (!_hcd->core_if->dma_enable + && tx_status.b.nptxqspcavail == 0) { && tx_status.b.nptxqspcavail == 0) { + no_queue_space = 1; no_queue_space = 1; + break; break; + } } + qh = qh = + list_entry(_hcd->non_periodic_qh_ptr, dwc list_entry(_hcd->non_periodic_qh_ptr, dwc + qh_list_entry); qh_list_entry); + status = status = + queue_transaction(_hcd, qh->channel, queue_transaction(_hcd, qh->channel, + tx_status.b.nptxfspcava tx_status.b.nptxfspcava + + if (status > 0) { if (status > 0) { + more_to_do = 1; more_to_do = 1; + } else if (status < 0) { } else if (status < 0) { + no_fifo_space = 1; no_fifo_space = 1; + break; break; + } } +#ifdef CONFIG_OTG_PLB_DMA_TASKLET | #ifdef OTG_PLB_DMA_TASKLET + if (atomic_read(&release_later)) { if (atomic_read(&release_later)) { + break; break; + } } +#endif #endif + + /* Advance to next QH, skipping start-of-list /* Advance to next QH, skipping start-of-list + _hcd->non_periodic_qh_ptr = _hcd->non_periodi _hcd->non_periodic_qh_ptr = _hcd->non_periodi + if (_hcd->non_periodic_qh_ptr == &_hcd->non_p if (_hcd->non_periodic_qh_ptr == &_hcd->non_p + _hcd->non_periodic_qh_ptr = _hcd->non _hcd->non_periodic_qh_ptr = _hcd->non + } } + } while (_hcd->non_periodic_qh_ptr != orig_qh_ptr); } while (_hcd->non_periodic_qh_ptr != orig_qh_ptr); + if (!_hcd->core_if->dma_enable) { if (!_hcd->core_if->dma_enable) { + gintmsk_data_t intr_mask = {.d32 = 0}; gintmsk_data_t intr_mask = {.d32 = 0}; + intr_mask.b.nptxfempty = 1; intr_mask.b.nptxfempty = 1; + +#ifndef CONFIG_OTG_PLB_DMA_TASKLET | #ifndef OTG_PLB_DMA_TASKLET +#ifdef CONFIG_DWC_DEBUG | #ifdef DEBUG + tx_status.d32 = dwc_read_reg32(&global_regs->gnpt tx_status.d32 = dwc_read_reg32(&global_regs->gnpt + DWC_DEBUGPL(DBG_HCDV, " NP Tx Req Queue Spac DWC_DEBUGPL(DBG_HCDV, " NP Tx Req Queue Spac + tx_status.b.nptxqspcavail); tx_status.b.nptxqspcavail); + DWC_DEBUGPL(DBG_HCDV, " NP Tx FIFO Space Ava DWC_DEBUGPL(DBG_HCDV, " NP Tx FIFO Space Ava + tx_status.b.nptxfspcavail); tx_status.b.nptxfspcavail); +#endif /* */ #endif /* */ +#endif #endif + + if (more_to_do || no_queue_space || no_fifo_space if (more_to_do || no_queue_space || no_fifo_space + + /* /* + * May need to queue more transaction * May need to queue more transaction + * queue or Tx FIFO empties. Enable t * queue or Tx FIFO empties. Enable t + * Tx FIFO empty interrupt. (Always u * Tx FIFO empty interrupt. (Always u + * level to ensure that new requests * level to ensure that new requests + * soon as possible.) * soon as possible.) + */ */ + dwc_modify_reg32(&global_regs->gintms dwc_modify_reg32(&global_regs->gintms + } else { } else { + /* /* + * Disable the Tx FIFO empty interrup * Disable the Tx FIFO empty interrup + * no more transactions that need to * no more transactions that need to + * now. This function is called from * now. This function is called from + * handlers to queue more transaction * handlers to queue more transaction + * states change. * states change. + */ */ + dwc_modify_reg32(&global_regs->gintms dwc_modify_reg32(&global_regs->gintms + } } + } } +} } + +/** /** + * Processes periodic channels for the next frame and queues * Processes periodic channels for the next frame and queues + * these channels to the DWC_otg controller. After queueing t * these channels to the DWC_otg controller. After queueing t + * Periodic Tx FIFO Empty interrupt is enabled if there are m * Periodic Tx FIFO Empty interrupt is enabled if there are m + * to queue as Periodic Tx FIFO or request queue space become * to queue as Periodic Tx FIFO or request queue space become + * Otherwise, the Periodic Tx FIFO Empty interrupt is disable * Otherwise, the Periodic Tx FIFO Empty interrupt is disable + */ */ +static void process_periodic_channels(dwc_otg_hcd_t * _hcd) static void process_periodic_channels(dwc_otg_hcd_t * _hcd) +{ { + hptxsts_data_t tx_status; hptxsts_data_t tx_status; + struct list_head *qh_ptr; struct list_head *qh_ptr; + dwc_otg_qh_t * qh; dwc_otg_qh_t * qh; + int status; int status; + int no_queue_space = 0; int no_queue_space = 0; + int no_fifo_space = 0; int no_fifo_space = 0; + dwc_otg_host_global_regs_t * host_regs; dwc_otg_host_global_regs_t * host_regs; + host_regs = _hcd->core_if->host_if->host_global_regs; host_regs = _hcd->core_if->host_if->host_global_regs; + DWC_DEBUGPL(DBG_HCDV, "Queue periodic transactions\n" DWC_DEBUGPL(DBG_HCDV, "Queue periodic transactions\n" + +#ifdef CONFIG_DWC_DEBUG | #ifdef DEBUG + tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts); tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts); + DWC_DEBUGPL(DBG_HCDV, " P Tx Req Queue Space Avail ( DWC_DEBUGPL(DBG_HCDV, " P Tx Req Queue Space Avail ( + tx_status.b.ptxqspcavail); tx_status.b.ptxqspcavail); + DWC_DEBUGPL(DBG_HCDV, " P Tx FIFO Space Avail (befor DWC_DEBUGPL(DBG_HCDV, " P Tx FIFO Space Avail (befor + tx_status.b.ptxfspcavail); tx_status.b.ptxfspcavail); + +#endif /* */ #endif /* */ + qh_ptr = _hcd->periodic_sched_assigned.next; qh_ptr = _hcd->periodic_sched_assigned.next; + while (qh_ptr != &_hcd->periodic_sched_assigned) { while (qh_ptr != &_hcd->periodic_sched_assigned) { + tx_status.d32 = dwc_read_reg32(&host_regs->hp tx_status.d32 = dwc_read_reg32(&host_regs->hp + if (tx_status.b.ptxqspcavail == 0) { if (tx_status.b.ptxqspcavail == 0) { + no_queue_space = 1; no_queue_space = 1; + break; break; + } } + qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list + + /* /* + * Set a flag if we're queuing high-bandwidth * Set a flag if we're queuing high-bandwidth + * The flag prevents any halts to get into th * The flag prevents any halts to get into th + * the middle of multiple high-bandwidth pack * the middle of multiple high-bandwidth pack + */ */ + if ((!_hcd->core_if->dma_enable) && if ((!_hcd->core_if->dma_enable) && + (qh->channel->multi_count > 1)) { (qh->channel->multi_count > 1)) { + _hcd->core_if->queuing_high_bandwidth _hcd->core_if->queuing_high_bandwidth + } } + status = queue_transaction(_hcd, qh->channel, status = queue_transaction(_hcd, qh->channel, + if (status < 0) { if (status < 0) { + no_fifo_space = 1; no_fifo_space = 1; + break; break; + } } + + /* /* + * In Slave mode, stay on the current transfe * In Slave mode, stay on the current transfe + * nothing more to do or the high-bandwidth r * nothing more to do or the high-bandwidth r + * reached. In DMA mode, only need to queue o * reached. In DMA mode, only need to queue o + * controller automatically handles multiple * controller automatically handles multiple + * high-bandwidth transfers. * high-bandwidth transfers. + */ */ + if (_hcd->core_if->dma_enable || if (_hcd->core_if->dma_enable || + (status == 0 || qh->channel->requests (status == 0 || qh->channel->requests + qh_ptr = qh_ptr->next; qh_ptr = qh_ptr->next; + + /* /* + * Move the QH from the periodic assi * Move the QH from the periodic assi + * the periodic queued schedule. * the periodic queued schedule. + */ */ + list_move(&qh->qh_list_entry, list_move(&qh->qh_list_entry, + &_hcd->periodic_sched_queued); &_hcd->periodic_sched_queued); + + /* done queuing high bandwidth */ /* done queuing high bandwidth */ + _hcd->core_if->queuing_high_bandwidth _hcd->core_if->queuing_high_bandwidth + } } + } } + if (!_hcd->core_if->dma_enable) { if (!_hcd->core_if->dma_enable) { + dwc_otg_core_global_regs_t * global_regs; dwc_otg_core_global_regs_t * global_regs; + gintmsk_data_t intr_mask = {.d32 = 0}; gintmsk_data_t intr_mask = {.d32 = 0}; + global_regs = _hcd->core_if->core_global_regs global_regs = _hcd->core_if->core_global_regs + intr_mask.b.ptxfempty = 1; intr_mask.b.ptxfempty = 1; + +#ifdef CONFIG_DWC_DEBUG | #ifdef DEBUG + tx_status.d32 = dwc_read_reg32(&host_regs->hptxst tx_status.d32 = dwc_read_reg32(&host_regs->hptxst + DWC_DEBUGPL(DBG_HCDV," P Tx Req Queue Space DWC_DEBUGPL(DBG_HCDV," P Tx Req Queue Space + tx_status.b.ptxqspcavail); tx_status.b.ptxqspcavail); + DWC_DEBUGPL(DBG_HCDV," P Tx FIFO Space Avail DWC_DEBUGPL(DBG_HCDV," P Tx FIFO Space Avail + tx_status.b.ptxfspcavail); tx_status.b.ptxfspcavail); + +#endif /* */ #endif /* */ + if (!(list_empty(&_hcd->periodic_sched_assigned)) if (!(list_empty(&_hcd->periodic_sched_assigned)) + || no_queue_space || no_fifo_space) { || no_queue_space || no_fifo_space) { + + /* /* + * May need to queue more transaction * May need to queue more transaction + * queue or Tx FIFO empties. Enable t * queue or Tx FIFO empties. Enable t + * FIFO empty interrupt. (Always use * FIFO empty interrupt. (Always use + * level to ensure that new requests * level to ensure that new requests + * soon as possible.) * soon as possible.) + */ */ + dwc_modify_reg32(&global_regs->gintms dwc_modify_reg32(&global_regs->gintms + } else { } else { + /* /* + * Disable the Tx FIFO empty interrup * Disable the Tx FIFO empty interrup + * no more transactions that need to * no more transactions that need to + * now. This function is called from * now. This function is called from + * handlers to queue more transaction * handlers to queue more transaction + * states change. * states change. + */ */ + dwc_modify_reg32(&global_regs->gintms dwc_modify_reg32(&global_regs->gintms + } } + } } +} } + + + +/** /** + * This function processes the currently active host channels * This function processes the currently active host channels + * transactions for these channels to the DWC_otg controller. * transactions for these channels to the DWC_otg controller. + * from HCD interrupt handler functions. * from HCD interrupt handler functions. + * * + * @param _hcd The HCD state structure. * @param _hcd The HCD state structure. + * @param _tr_type The type(s) of transactions to queue (non- * @param _tr_type The type(s) of transactions to queue (non- + * periodic, or both). * periodic, or both). + */ */ +void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t * _hcd, void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t * _hcd, + dwc_otg_transaction_type_ dwc_otg_transaction_type_ +{ { + +#ifdef DEBUG_SOF #ifdef DEBUG_SOF + DWC_DEBUGPL(DBG_HCD, "Queue Transactions\n"); DWC_DEBUGPL(DBG_HCD, "Queue Transactions\n"); + +#endif /* */ #endif /* */ + /* Process host channels associated with periodic /* Process host channels associated with periodic + if ((_tr_type == DWC_OTG_TRANSACTION_PERIODIC if ((_tr_type == DWC_OTG_TRANSACTION_PERIODIC + || _tr_type == DWC_OTG_TRANSACTION_ALL) || _tr_type == DWC_OTG_TRANSACTION_ALL) + && !list_empty(&_hcd->periodic_sched_assigned && !list_empty(&_hcd->periodic_sched_assigned + process_periodic_channels(_hcd); process_periodic_channels(_hcd); + } } + + /* Process host channels associated with non-periodic /* Process host channels associated with non-periodic + if ((_tr_type == DWC_OTG_TRANSACTION_NON_PERIODIC if ((_tr_type == DWC_OTG_TRANSACTION_NON_PERIODIC + || _tr_type == DWC_OTG_TRANSACTION_ALL)) { || _tr_type == DWC_OTG_TRANSACTION_ALL)) { + if (!list_empty(&_hcd->non_periodic_sched_act if (!list_empty(&_hcd->non_periodic_sched_act + process_non_periodic_channels(_hcd); process_non_periodic_channels(_hcd); + } else { } else { + /* /* + * Ensure NP Tx FIFO empty interrupt * Ensure NP Tx FIFO empty interrupt + * there are no non-periodic transfer * there are no non-periodic transfer + */ */ + gintmsk_data_t gintmsk = {.d32 = 0}; gintmsk_data_t gintmsk = {.d32 = 0}; + gintmsk.b.nptxfempty = 1; gintmsk.b.nptxfempty = 1; + dwc_modify_reg32(&_hcd->core_if->core dwc_modify_reg32(&_hcd->core_if->core + } } + } } +} } + +/** /** + * Sets the final status of an URB and returns it to the devi * Sets the final status of an URB and returns it to the devi + * required cleanup of the URB is performed. * required cleanup of the URB is performed. + */ */ +void dwc_otg_hcd_complete_urb(dwc_otg_hcd_t * _hcd, struct ur void dwc_otg_hcd_complete_urb(dwc_otg_hcd_t * _hcd, struct ur + int _status) int _status) +__releases(_hcd->lock) __releases(_hcd->lock) +__acquires(_hcd->lock) __acquires(_hcd->lock) +{ { + +#ifdef CONFIG_DWC_DEBUG | #ifdef DEBUG + if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { + DWC_PRINT("%s: urb %p, device %d, ep %d %s, s DWC_PRINT("%s: urb %p, device %d, ep %d %s, s + __func__, _urb, usb_pipedevice(_ur __func__, _urb, usb_pipedevice(_ur + usb_pipeendpoint(_urb->pipe), usb_pipeendpoint(_urb->pipe), + usb_pipein(_urb->pipe) ? "IN" : "O usb_pipein(_urb->pipe) ? "IN" : "O + if (usb_pipetype(_urb->pipe) == PIPE_ISOCHRON if (usb_pipetype(_urb->pipe) == PIPE_ISOCHRON + int i; int i; + for (i = 0; i < _urb->number_of_packe for (i = 0; i < _urb->number_of_packe + DWC_PRINT(" ISO Desc %d stat DWC_PRINT(" ISO Desc %d stat + _urb->iso_frame_de _urb->iso_frame_de + } } + } } + } } + +#endif /* */ #endif /* */ + spin_lock(&_hcd->lock); < + _urb->hcpriv = NULL; _urb->hcpriv = NULL; + usb_hcd_unlink_urb_from_ep(dwc_otg_hcd_to_hcd(_hcd), usb_hcd_unlink_urb_from_ep(dwc_otg_hcd_to_hcd(_hcd), + usb_hcd_giveback_urb(dwc_otg_hcd_to_hcd(_hcd), _urb, < + spin_unlock(&_hcd->lock); spin_unlock(&_hcd->lock); + > usb_hcd_giveback_urb(dwc_otg_hcd_to_hcd(_hcd), _urb, + > spin_lock(&_hcd->lock); +} } + + +/* /* + * Returns the Queue Head for an URB. * Returns the Queue Head for an URB. + */ */ +dwc_otg_qh_t * dwc_urb_to_qh(struct urb *_urb) dwc_otg_qh_t * dwc_urb_to_qh(struct urb *_urb) +{ { + struct usb_host_endpoint *ep = dwc_urb_to_endpoint(_u struct usb_host_endpoint *ep = dwc_urb_to_endpoint(_u + return (dwc_otg_qh_t *) ep->hcpriv; return (dwc_otg_qh_t *) ep->hcpriv; +} } + + +#ifdef CONFIG_DWC_DEBUG | #ifdef DEBUG +void dwc_print_setup_data(uint8_t * setup) void dwc_print_setup_data(uint8_t * setup) +{ { + int i; int i; + if (CHK_DEBUG_LEVEL(DBG_HCD)) { if (CHK_DEBUG_LEVEL(DBG_HCD)) { + DWC_PRINT("Setup Data = MSB "); DWC_PRINT("Setup Data = MSB "); + for (i = 7; i >= 0; i--) for (i = 7; i >= 0; i--) + DWC_PRINT("%02x ", setup[i]); DWC_PRINT("%02x ", setup[i]); + DWC_PRINT("\n"); DWC_PRINT("\n"); + DWC_PRINT(" bmRequestType Tranfer = %s\n", DWC_PRINT(" bmRequestType Tranfer = %s\n", + (setup[0] & 0x80) ? "Device-to-Hos (setup[0] & 0x80) ? "Device-to-Hos + "Host-to-Device"); "Host-to-Device"); + DWC_PRINT(" bmRequestType Type = "); DWC_PRINT(" bmRequestType Type = "); + switch ((setup[0] & 0x60) >> 5) { switch ((setup[0] & 0x60) >> 5) { + case 0: case 0: + DWC_PRINT("Standard\n"); DWC_PRINT("Standard\n"); + break; break; + case 1: case 1: + DWC_PRINT("Class\n"); DWC_PRINT("Class\n"); + break; break; + case 2: case 2: + DWC_PRINT("Vendor\n"); DWC_PRINT("Vendor\n"); + break; break; + case 3: case 3: + DWC_PRINT("Reserved\n"); DWC_PRINT("Reserved\n"); + break; break; + } } + DWC_PRINT(" bmRequestType Recipient = "); DWC_PRINT(" bmRequestType Recipient = "); + switch (setup[0] & 0x1f) { switch (setup[0] & 0x1f) { + case 0: case 0: + DWC_PRINT("Device\n"); DWC_PRINT("Device\n"); + break; break; + case 1: case 1: + DWC_PRINT("Interface\n"); DWC_PRINT("Interface\n"); + break; break; + case 2: case 2: + DWC_PRINT("Endpoint\n"); DWC_PRINT("Endpoint\n"); + break; break; + case 3: case 3: + DWC_PRINT("Other\n"); DWC_PRINT("Other\n"); + break; break; + default: default: + DWC_PRINT("Reserved\n"); DWC_PRINT("Reserved\n"); + break; break; + } } + DWC_PRINT(" bRequest = 0x%0x\n", setup[1]); DWC_PRINT(" bRequest = 0x%0x\n", setup[1]); + DWC_PRINT(" wValue = 0x%0x\n", *((uint16_t * DWC_PRINT(" wValue = 0x%0x\n", *((uint16_t * + DWC_PRINT(" wIndex = 0x%0x\n", *((uint16_t * DWC_PRINT(" wIndex = 0x%0x\n", *((uint16_t * + DWC_PRINT(" wLength = 0x%0x\n\n", *((uint16_ DWC_PRINT(" wLength = 0x%0x\n\n", *((uint16_ + } } +} } + + +#endif /* */ #endif /* */ +void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t * _hcd) void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t * _hcd) +{ { + +/* /* +#ifdef CONFIG_DWC_DEBUG | #ifdef DEBUG + DWC_PRINT("Frame remaining at SOF:\n"); DWC_PRINT("Frame remaining at SOF:\n"); + DWC_PRINT(" samples %u, accum %llu, avg %llu\n", DWC_PRINT(" samples %u, accum %llu, avg %llu\n", + _hcd->frrem_samples, _hcd->frrem_accum, _hcd->frrem_samples, _hcd->frrem_accum, + (_hcd->frrem_samples > 0) ? (_hcd->frrem_samples > 0) ? + _hcd->frrem_accum/_hcd->frrem_samples : 0); _hcd->frrem_accum/_hcd->frrem_samples : 0); + + DWC_PRINT("\n"); DWC_PRINT("\n"); + DWC_PRINT("Frame remaining at start_transfer (uframe DWC_PRINT("Frame remaining at start_transfer (uframe + DWC_PRINT(" samples %u, accum %llu, avg %llu\n", DWC_PRINT(" samples %u, accum %llu, avg %llu\n", + _hcd->core_if->hfnum_7_samples, _hcd->core_ _hcd->core_if->hfnum_7_samples, _hcd->core_ + (_hcd->core_if->hfnum_7_samples > 0) ? (_hcd->core_if->hfnum_7_samples > 0) ? + _hcd->core_if->hfnum_7_frrem_accum/_hcd->co _hcd->core_if->hfnum_7_frrem_accum/_hcd->co + DWC_PRINT("Frame remaining at start_transfer (uframe DWC_PRINT("Frame remaining at start_transfer (uframe + DWC_PRINT(" samples %u, accum %llu, avg %llu\n", DWC_PRINT(" samples %u, accum %llu, avg %llu\n", + _hcd->core_if->hfnum_0_samples, _hcd->core_ _hcd->core_if->hfnum_0_samples, _hcd->core_ + (_hcd->core_if->hfnum_0_samples > 0) ? (_hcd->core_if->hfnum_0_samples > 0) ? + _hcd->core_if->hfnum_0_frrem_accum/_hcd->co _hcd->core_if->hfnum_0_frrem_accum/_hcd->co + DWC_PRINT("Frame remaining at start_transfer (uframe DWC_PRINT("Frame remaining at start_transfer (uframe + DWC_PRINT(" samples %u, accum %llu, avg %llu\n", DWC_PRINT(" samples %u, accum %llu, avg %llu\n", + _hcd->core_if->hfnum_other_samples, _hcd->c _hcd->core_if->hfnum_other_samples, _hcd->c + (_hcd->core_if->hfnum_other_samples > 0) ? (_hcd->core_if->hfnum_other_samples > 0) ? + _hcd->core_if->hfnum_other_frrem_accum/_hcd _hcd->core_if->hfnum_other_frrem_accum/_hcd + + DWC_PRINT("\n"); DWC_PRINT("\n"); + DWC_PRINT("Frame remaining at sample point A (uframe DWC_PRINT("Frame remaining at sample point A (uframe + DWC_PRINT(" samples %u, accum %llu, avg %llu\n", DWC_PRINT(" samples %u, accum %llu, avg %llu\n", + _hcd->hfnum_7_samples_a, _hcd->hfnum_7_frre _hcd->hfnum_7_samples_a, _hcd->hfnum_7_frre + (_hcd->hfnum_7_samples_a > 0) ? (_hcd->hfnum_7_samples_a > 0) ? + _hcd->hfnum_7_frrem_accum_a/_hcd->hfnum_7_s _hcd->hfnum_7_frrem_accum_a/_hcd->hfnum_7_s + DWC_PRINT("Frame remaining at sample point A (uframe DWC_PRINT("Frame remaining at sample point A (uframe + DWC_PRINT(" samples %u, accum %llu, avg %llu\n", DWC_PRINT(" samples %u, accum %llu, avg %llu\n", + _hcd->hfnum_0_samples_a, _hcd->hfnum_0_frre _hcd->hfnum_0_samples_a, _hcd->hfnum_0_frre + (_hcd->hfnum_0_samples_a > 0) ? (_hcd->hfnum_0_samples_a > 0) ? + _hcd->hfnum_0_frrem_accum_a/_hcd->hfnum_0_s _hcd->hfnum_0_frrem_accum_a/_hcd->hfnum_0_s + DWC_PRINT("Frame remaining at sample point A (uframe DWC_PRINT("Frame remaining at sample point A (uframe + DWC_PRINT(" samples %u, accum %llu, avg %llu\n", DWC_PRINT(" samples %u, accum %llu, avg %llu\n", + _hcd->hfnum_other_samples_a, _hcd->hfnum_ot _hcd->hfnum_other_samples_a, _hcd->hfnum_ot + (_hcd->hfnum_other_samples_a > 0) ? (_hcd->hfnum_other_samples_a > 0) ? + _hcd->hfnum_other_frrem_accum_a/_hcd->hfnum _hcd->hfnum_other_frrem_accum_a/_hcd->hfnum + + DWC_PRINT("\n"); DWC_PRINT("\n"); + DWC_PRINT("Frame remaining at sample point B (uframe DWC_PRINT("Frame remaining at sample point B (uframe + DWC_PRINT(" samples %u, accum %llu, avg %llu\n", DWC_PRINT(" samples %u, accum %llu, avg %llu\n", + _hcd->hfnum_7_samples_b, _hcd->hfnum_7_frre _hcd->hfnum_7_samples_b, _hcd->hfnum_7_frre + (_hcd->hfnum_7_samples_b > 0) ? (_hcd->hfnum_7_samples_b > 0) ? + _hcd->hfnum_7_frrem_accum_b/_hcd->hfnum_7_s _hcd->hfnum_7_frrem_accum_b/_hcd->hfnum_7_s + DWC_PRINT("Frame remaining at sample point B (uframe DWC_PRINT("Frame remaining at sample point B (uframe + DWC_PRINT(" samples %u, accum %llu, avg %llu\n", DWC_PRINT(" samples %u, accum %llu, avg %llu\n", + _hcd->hfnum_0_samples_b, _hcd->hfnum_0_frre _hcd->hfnum_0_samples_b, _hcd->hfnum_0_frre + (_hcd->hfnum_0_samples_b > 0) ? (_hcd->hfnum_0_samples_b > 0) ? + _hcd->hfnum_0_frrem_accum_b/_hcd->hfnum_0_s _hcd->hfnum_0_frrem_accum_b/_hcd->hfnum_0_s + DWC_PRINT("Frame remaining at sample point B (uframe DWC_PRINT("Frame remaining at sample point B (uframe + DWC_PRINT(" samples %u, accum %llu, avg %llu\n", DWC_PRINT(" samples %u, accum %llu, avg %llu\n", + _hcd->hfnum_other_samples_b, _hcd->hfnum_ot _hcd->hfnum_other_samples_b, _hcd->hfnum_ot + (_hcd->hfnum_other_samples_b > 0) ? (_hcd->hfnum_other_samples_b > 0) ? + _hcd->hfnum_other_frrem_accum_b/_hcd->hfnum _hcd->hfnum_other_frrem_accum_b/_hcd->hfnum +#endif #endif +*/ */ +} void dwc_otg_hcd_dump_state(dwc_otg_hcd_t * _hcd) } void dwc_otg_hcd_dump_state(dwc_otg_hcd_t * _hcd) +{ { + +#ifdef CONFIG_DWC_DEBUG | #ifdef DEBUG + int num_channels; int num_channels; + int i; int i; + gnptxsts_data_t np_tx_status; gnptxsts_data_t np_tx_status; + hptxsts_data_t p_tx_status; hptxsts_data_t p_tx_status; + num_channels = _hcd->core_if->core_params->host_chann num_channels = _hcd->core_if->core_params->host_chann + DWC_PRINT("\n"); DWC_PRINT("\n"); + DWC_PRINT DWC_PRINT + ("*********************************************** ("*********************************************** + DWC_PRINT("HCD State:\n"); DWC_PRINT("HCD State:\n"); + DWC_PRINT(" Num channels: %d\n", num_channels); DWC_PRINT(" Num channels: %d\n", num_channels); + for (i = 0; i < num_channels; i++) { for (i = 0; i < num_channels; i++) { + dwc_hc_t * hc = _hcd->hc_ptr_array[i]; dwc_hc_t * hc = _hcd->hc_ptr_array[i]; + DWC_PRINT(" Channel %d:\n", i); DWC_PRINT(" Channel %d:\n", i); + DWC_PRINT(" dev_addr: %d, ep_num: %d, ep_i DWC_PRINT(" dev_addr: %d, ep_num: %d, ep_i + hc->dev_addr, hc->ep_num, hc->ep_i hc->dev_addr, hc->ep_num, hc->ep_i + DWC_PRINT(" speed: %d\n", hc->speed); DWC_PRINT(" speed: %d\n", hc->speed); + DWC_PRINT(" ep_type: %d\n", hc->ep_type); DWC_PRINT(" ep_type: %d\n", hc->ep_type); + DWC_PRINT(" max_packet: %d\n", hc->max_pac DWC_PRINT(" max_packet: %d\n", hc->max_pac + DWC_PRINT(" data_pid_start: %d\n", hc->dat DWC_PRINT(" data_pid_start: %d\n", hc->dat + DWC_PRINT(" multi_count: %d\n", hc->multi_ DWC_PRINT(" multi_count: %d\n", hc->multi_ + DWC_PRINT(" xfer_started: %d\n", hc->xfer_ DWC_PRINT(" xfer_started: %d\n", hc->xfer_ + DWC_PRINT(" xfer_buff: %p\n", hc->xfer_buf DWC_PRINT(" xfer_buff: %p\n", hc->xfer_buf + DWC_PRINT(" xfer_len: %d\n", hc->xfer_len) DWC_PRINT(" xfer_len: %d\n", hc->xfer_len) + DWC_PRINT(" xfer_count: %d\n", hc->xfer_co DWC_PRINT(" xfer_count: %d\n", hc->xfer_co + DWC_PRINT(" halt_on_queue: %d\n", hc->halt DWC_PRINT(" halt_on_queue: %d\n", hc->halt + DWC_PRINT(" halt_pending: %d\n", hc->halt_ DWC_PRINT(" halt_pending: %d\n", hc->halt_ + DWC_PRINT(" halt_status: %d\n", hc->halt_s DWC_PRINT(" halt_status: %d\n", hc->halt_s + DWC_PRINT(" do_split: %d\n", hc->do_split) DWC_PRINT(" do_split: %d\n", hc->do_split) + DWC_PRINT(" complete_split: %d\n", hc->com DWC_PRINT(" complete_split: %d\n", hc->com + DWC_PRINT(" hub_addr: %d\n", hc->hub_addr) DWC_PRINT(" hub_addr: %d\n", hc->hub_addr) + DWC_PRINT(" port_addr: %d\n", hc->port_add DWC_PRINT(" port_addr: %d\n", hc->port_add + DWC_PRINT(" xact_pos: %d\n", hc->xact_pos) DWC_PRINT(" xact_pos: %d\n", hc->xact_pos) + DWC_PRINT(" requests: %d\n", hc->requests) DWC_PRINT(" requests: %d\n", hc->requests) + DWC_PRINT(" qh: %p\n", hc->qh); DWC_PRINT(" qh: %p\n", hc->qh); + if (hc->xfer_started) { if (hc->xfer_started) { + hfnum_data_t hfnum; hfnum_data_t hfnum; + hcchar_data_t hcchar; hcchar_data_t hcchar; + hctsiz_data_t hctsiz; hctsiz_data_t hctsiz; + hcint_data_t hcint; hcint_data_t hcint; + hcintmsk_data_t hcintmsk; hcintmsk_data_t hcintmsk; + hfnum.d32 = hfnum.d32 = + dwc_read_reg32(&_hcd->core_if->ho dwc_read_reg32(&_hcd->core_if->ho + host_global_regs-> host_global_regs-> + hcchar.d32 = hcchar.d32 = + dwc_read_reg32(&_hcd->core_if->ho dwc_read_reg32(&_hcd->core_if->ho + hcchar); hcchar); + hctsiz.d32 = hctsiz.d32 = + dwc_read_reg32(&_hcd->core_if->ho dwc_read_reg32(&_hcd->core_if->ho + hctsiz); hctsiz); + hcint.d32 = hcint.d32 = + dwc_read_reg32(&_hcd->core_if->ho dwc_read_reg32(&_hcd->core_if->ho + hcint); hcint); + hcintmsk.d32 = hcintmsk.d32 = + dwc_read_reg32(&_hcd->core_if->ho dwc_read_reg32(&_hcd->core_if->ho + hcintmsk); hcintmsk); + DWC_PRINT(" hfnum: 0x%08x\n", hfnu DWC_PRINT(" hfnum: 0x%08x\n", hfnu + DWC_PRINT(" hcchar: 0x%08x\n", hcc DWC_PRINT(" hcchar: 0x%08x\n", hcc + DWC_PRINT(" hctsiz: 0x%08x\n", hct DWC_PRINT(" hctsiz: 0x%08x\n", hct + DWC_PRINT(" hcint: 0x%08x\n", hcin DWC_PRINT(" hcint: 0x%08x\n", hcin + DWC_PRINT(" hcintmsk: 0x%08x\n", h DWC_PRINT(" hcintmsk: 0x%08x\n", h + } } + if (hc->xfer_started && (hc->qh != NULL) if (hc->xfer_started && (hc->qh != NULL) + && (hc->qh->qtd_in_process != NULL)) { && (hc->qh->qtd_in_process != NULL)) { + dwc_otg_qtd_t * qtd; dwc_otg_qtd_t * qtd; + struct urb *urb; struct urb *urb; + qtd = hc->qh->qtd_in_process; qtd = hc->qh->qtd_in_process; + urb = qtd->urb; urb = qtd->urb; + DWC_PRINT(" URB Info:\n"); DWC_PRINT(" URB Info:\n"); + DWC_PRINT(" qtd: %p, urb: %p\n", DWC_PRINT(" qtd: %p, urb: %p\n", + if (urb != NULL) { if (urb != NULL) { + DWC_PRINT(" Dev: %d, EP: DWC_PRINT(" Dev: %d, EP: + usb_pipedevice(urb usb_pipedevice(urb + usb_pipeendpoint(u usb_pipeendpoint(u + usb_pipein(urb-> usb_pipein(urb-> + pipe) pipe) + DWC_PRINT(" Max packet s DWC_PRINT(" Max packet s + usb_maxpacket(urb- usb_maxpacket(urb- + usb usb + + DWC_PRINT(" transfer_buf DWC_PRINT(" transfer_buf + urb->transfer_buff urb->transfer_buff + DWC_PRINT(" transfer_dma DWC_PRINT(" transfer_dma + (void *)urb->trans (void *)urb->trans + DWC_PRINT(" transfer_buf DWC_PRINT(" transfer_buf + urb->transfer_buff urb->transfer_buff + DWC_PRINT(" actual_lengt DWC_PRINT(" actual_lengt + urb->actual_length urb->actual_length + } } + } } + } | } DWC_PRINT(" non_periodic_channels: %d\n", + > _hcd->non_periodic_channels); + > DWC_PRINT(" periodic_channels: %d\n", _hcd->periodic + DWC_PRINT(" periodic_usecs: %d\n", _hcd->periodic_us DWC_PRINT(" periodic_usecs: %d\n", _hcd->periodic_us + np_tx_status.d32 = np_tx_status.d32 = + dwc_read_reg32(&_hcd->core_if->core_global_regs-> dwc_read_reg32(&_hcd->core_if->core_global_regs-> + DWC_PRINT(" NP Tx Req Queue Space Avail: %d\n", DWC_PRINT(" NP Tx Req Queue Space Avail: %d\n", + np_tx_status.b.nptxqspcavail); np_tx_status.b.nptxqspcavail); + DWC_PRINT(" NP Tx FIFO Space Avail: %d\n", DWC_PRINT(" NP Tx FIFO Space Avail: %d\n", + np_tx_status.b.nptxfspcavail); np_tx_status.b.nptxfspcavail); + p_tx_status.d32 = p_tx_status.d32 = + dwc_read_reg32(&_hcd->core_if->host_if->host_glob dwc_read_reg32(&_hcd->core_if->host_if->host_glob + DWC_PRINT(" P Tx Req Queue Space Avail: %d\n", DWC_PRINT(" P Tx Req Queue Space Avail: %d\n", + p_tx_status.b.ptxqspcavail); p_tx_status.b.ptxqspcavail); + DWC_PRINT(" P Tx FIFO Space Avail: %d\n", p_tx_statu DWC_PRINT(" P Tx FIFO Space Avail: %d\n", p_tx_statu + dwc_otg_hcd_dump_frrem(_hcd); dwc_otg_hcd_dump_frrem(_hcd); + dwc_otg_dump_global_registers(_hcd->core_if); dwc_otg_dump_global_registers(_hcd->core_if); + dwc_otg_dump_host_registers(_hcd->core_if); dwc_otg_dump_host_registers(_hcd->core_if); + DWC_PRINT DWC_PRINT + ("*********************************************** ("*********************************************** + DWC_PRINT("\n"); DWC_PRINT("\n"); + +#endif /* */ #endif /* */ +} } +#endif /* CONFIG_DWC_DEVICE_ONLY */ | #endif /* DWC_DEVICE_ONLY */ diff --git a/drivers/usb/gadget/dwc_otg/sdiff/dwc_otg_hcd.h.sdiff b/drivers/usb/gadget/dwc_otg/sdiff/dwc_otg_hcd.h.sdiff new file mode 100644 index 00000000000..b4932c6465c --- /dev/null +++ b/drivers/usb/gadget/dwc_otg/sdiff/dwc_otg_hcd.h.sdiff @@ -0,0 +1,675 @@ +/* ========================================================== /* ========================================================== + * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers + * $Revision: #6 $ * $Revision: #6 $ + * $Date: 2006/12/05 $ * $Date: 2006/12/05 $ + * $Change: 762293 $ * $Change: 762293 $ + * * + * Synopsys HS OTG Linux Software Driver and documentation (h * Synopsys HS OTG Linux Software Driver and documentation (h + * "Software") is an Unsupported proprietary work of Synopsys * "Software") is an Unsupported proprietary work of Synopsys + * otherwise expressly agreed to in writing between Synopsys * otherwise expressly agreed to in writing between Synopsys + * * + * The Software IS NOT an item of Licensed Software or Licens * The Software IS NOT an item of Licensed Software or Licens + * any End User Software License Agreement or Agreement for L * any End User Software License Agreement or Agreement for L + * with Synopsys or any supplement thereto. You are permitted * with Synopsys or any supplement thereto. You are permitted + * redistribute this Software in source and binary forms, wit * redistribute this Software in source and binary forms, wit + * modification, provided that redistributions of source code * modification, provided that redistributions of source code + * notice. You may not view, use, disclose, copy or distribut * notice. You may not view, use, disclose, copy or distribut + * any information contained herein except pursuant to this l * any information contained herein except pursuant to this l + * Synopsys. If you do not agree with this notice, including * Synopsys. If you do not agree with this notice, including + * below, then you are not authorized to use the Software. * below, then you are not authorized to use the Software. + * * + * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON A * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON A + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PA * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PA + * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABL * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABL + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTER * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARI * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARI + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE PO * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE PO + * DAMAGE. * DAMAGE. + * ========================================================== * ========================================================== +#ifndef CONFIG_DWC_DEVICE_ONLY #ifndef CONFIG_DWC_DEVICE_ONLY +#if !defined(__DWC_HCD_H__) #if !defined(__DWC_HCD_H__) +#define __DWC_HCD_H__ #define __DWC_HCD_H__ + +#include <linux/list.h> #include <linux/list.h> +#include <linux/usb.h> #include <linux/usb.h> +#include <linux/usb/hcd.h> | #include <../drivers/usb/core/hcd.h> + +struct lm_device; struct lm_device; +struct dwc_otg_device; struct dwc_otg_device; + +#include "dwc_otg_cil.h" #include "dwc_otg_cil.h" + +/** /** + * @file * @file + * * + * This file contains the structures, constants, and interfac * This file contains the structures, constants, and interfac + * the Host Contoller Driver (HCD). * the Host Contoller Driver (HCD). + * * + * The Host Controller Driver (HCD) is responsible for transl * The Host Controller Driver (HCD) is responsible for transl + * from the USB Driver into the appropriate actions on the DW * from the USB Driver into the appropriate actions on the DW + * It isolates the USBD from the specifics of the controller * It isolates the USBD from the specifics of the controller + * API to the USBD. * API to the USBD. + */ */ + +/** /** + * Phases for control transfers. * Phases for control transfers. + */ */ +typedef enum dwc_otg_control_phase { typedef enum dwc_otg_control_phase { + DWC_OTG_CONTROL_SETUP, DWC_OTG_CONTROL_SETUP, + DWC_OTG_CONTROL_DATA, DWC_OTG_CONTROL_DATA, + DWC_OTG_CONTROL_STATUS DWC_OTG_CONTROL_STATUS +} dwc_otg_control_phase_e; } dwc_otg_control_phase_e; + +/** Transaction types. */ /** Transaction types. */ +typedef enum dwc_otg_transaction_type { typedef enum dwc_otg_transaction_type { + DWC_OTG_TRANSACTION_NONE, DWC_OTG_TRANSACTION_NONE, + DWC_OTG_TRANSACTION_PERIODIC, DWC_OTG_TRANSACTION_PERIODIC, + DWC_OTG_TRANSACTION_NON_PERIODIC, DWC_OTG_TRANSACTION_NON_PERIODIC, + DWC_OTG_TRANSACTION_ALL DWC_OTG_TRANSACTION_ALL +} dwc_otg_transaction_type_e; } dwc_otg_transaction_type_e; + +/** /** + * A Queue Transfer Descriptor (QTD) holds the state of a bul * A Queue Transfer Descriptor (QTD) holds the state of a bul + * interrupt, or isochronous transfer. A single QTD is create * interrupt, or isochronous transfer. A single QTD is create + * (of one of these types) submitted to the HCD. The transfer * (of one of these types) submitted to the HCD. The transfer + * a QTD may require one or multiple transactions. * a QTD may require one or multiple transactions. + * * + * A QTD is linked to a Queue Head, which is entered in eithe * A QTD is linked to a Queue Head, which is entered in eithe + * non-periodic or periodic schedule for execution. When a QT * non-periodic or periodic schedule for execution. When a QT + * execution, some or all of its transactions may be executed * execution, some or all of its transactions may be executed + * execution, the state of the QTD is updated. The QTD may be * execution, the state of the QTD is updated. The QTD may be + * its transactions are complete or if an error occurred. Oth * its transactions are complete or if an error occurred. Oth + * remains in the schedule so more transactions can be execut * remains in the schedule so more transactions can be execut + */ */ + +struct dwc_otg_qh; struct dwc_otg_qh; + +typedef struct dwc_otg_qtd { typedef struct dwc_otg_qtd { + /** /** + * Determines the PID of the next data packet for the * Determines the PID of the next data packet for the + * control transfers. Ignored for other transfer type * control transfers. Ignored for other transfer type + * One of the following values: * One of the following values: + * - DWC_OTG_HC_PID_DATA0 * - DWC_OTG_HC_PID_DATA0 + * - DWC_OTG_HC_PID_DATA1 * - DWC_OTG_HC_PID_DATA1 + */ */ + uint8_t data_toggle; uint8_t data_toggle; + + /** Current phase for control transfers (Setup, Data, /** Current phase for control transfers (Setup, Data, + dwc_otg_control_phase_e control_phase; dwc_otg_control_phase_e control_phase; + + /** Keep track of the current split type /** Keep track of the current split type + * for FS/LS endpoints on a HS Hub */ * for FS/LS endpoints on a HS Hub */ + uint8_t complete_split; uint8_t complete_split; + + /** How many bytes transferred during SSPLIT OUT */ /** How many bytes transferred during SSPLIT OUT */ + uint32_t ssplit_out_xfer_count; uint32_t ssplit_out_xfer_count; + + /** /** + * Holds the number of bus errors that have occurred * Holds the number of bus errors that have occurred + * within this transfer. * within this transfer. + */ */ + uint8_t error_count; uint8_t error_count; + + /** /** + * Index of the next frame descriptor for an isochron * Index of the next frame descriptor for an isochron + * frame descriptor describes the buffer position and * frame descriptor describes the buffer position and + * data to be transferred in the next scheduled (micr * data to be transferred in the next scheduled (micr + * isochronous transfer. It also holds status for tha * isochronous transfer. It also holds status for tha + * The frame index starts at 0. * The frame index starts at 0. + */ */ + int isoc_frame_index; int isoc_frame_index; + + /** Position of the ISOC split on full/low speed */ /** Position of the ISOC split on full/low speed */ + uint8_t isoc_split_pos; uint8_t isoc_split_pos; + + /** Position of the ISOC split in the buffer for the /** Position of the ISOC split in the buffer for the + uint16_t isoc_split_offset; uint16_t isoc_split_offset; + + /** URB for this transfer */ /** URB for this transfer */ + struct urb *urb; struct urb *urb; + + /** This list of QTDs */ /** This list of QTDs */ + struct list_head qtd_list_entry; struct list_head qtd_list_entry; + + /* Field to track the qh pointer */ /* Field to track the qh pointer */ + struct dwc_otg_qh *qtd_qh_ptr; struct dwc_otg_qh *qtd_qh_ptr; +} dwc_otg_qtd_t; } dwc_otg_qtd_t; + +/** /** + * A Queue Head (QH) holds the static characteristics of an e * A Queue Head (QH) holds the static characteristics of an e + * maintains a list of transfers (QTDs) for that endpoint. A * maintains a list of transfers (QTDs) for that endpoint. A + * be entered in either the non-periodic or periodic schedule * be entered in either the non-periodic or periodic schedule + */ */ +typedef struct dwc_otg_qh { typedef struct dwc_otg_qh { + /** /** + * Endpoint type. * Endpoint type. + * One of the following values: * One of the following values: + * - USB_ENDPOINT_XFER_CONTROL * - USB_ENDPOINT_XFER_CONTROL + * - USB_ENDPOINT_XFER_ISOC * - USB_ENDPOINT_XFER_ISOC + * - USB_ENDPOINT_XFER_BULK * - USB_ENDPOINT_XFER_BULK + * - USB_ENDPOINT_XFER_INT * - USB_ENDPOINT_XFER_INT + */ */ + uint8_t ep_type; uint8_t ep_type; + uint8_t ep_is_in; uint8_t ep_is_in; + + /** wMaxPacketSize Field of Endpoint Descriptor. */ /** wMaxPacketSize Field of Endpoint Descriptor. */ + uint16_t maxp; uint16_t maxp; + + /** /** + * Determines the PID of the next data packet for non * Determines the PID of the next data packet for non + * transfers. Ignored for control transfers.<br> * transfers. Ignored for control transfers.<br> + * One of the following values: * One of the following values: + * - DWC_OTG_HC_PID_DATA0 * - DWC_OTG_HC_PID_DATA0 + * - DWC_OTG_HC_PID_DATA1 * - DWC_OTG_HC_PID_DATA1 + */ */ + uint8_t data_toggle; uint8_t data_toggle; + + /** Ping state if 1. */ /** Ping state if 1. */ + uint8_t ping_state; uint8_t ping_state; + + /** /** + * List of QTDs for this QH. * List of QTDs for this QH. + */ */ + struct list_head qtd_list; struct list_head qtd_list; + + /** Host channel currently processing transfers for t /** Host channel currently processing transfers for t + dwc_hc_t *channel; dwc_hc_t *channel; + + /** QTD currently assigned to a host channel for this /** QTD currently assigned to a host channel for this + dwc_otg_qtd_t *qtd_in_process; dwc_otg_qtd_t *qtd_in_process; + + /** Full/low speed endpoint on high-speed hub require /** Full/low speed endpoint on high-speed hub require + uint8_t do_split; uint8_t do_split; + + /** @name Periodic schedule information */ /** @name Periodic schedule information */ + /** @{ */ /** @{ */ + + /** Bandwidth in microseconds per (micro)frame. */ /** Bandwidth in microseconds per (micro)frame. */ + uint8_t usecs; uint8_t usecs; + + /** Interval between transfers in (micro)frames. */ /** Interval between transfers in (micro)frames. */ + uint16_t interval; uint16_t interval; + + /** /** + * (micro)frame to initialize a periodic transfer. Th * (micro)frame to initialize a periodic transfer. Th + * executes in the following (micro)frame. * executes in the following (micro)frame. + */ */ + uint16_t sched_frame; uint16_t sched_frame; + + /** (micro)frame at which last start split was initia /** (micro)frame at which last start split was initia + uint16_t start_split_frame; uint16_t start_split_frame; + + /** @} */ /** @} */ + + uint16_t speed; < + uint16_t frame_usecs[8]; < + < + /** Entry for QH in either the periodic or non-period /** Entry for QH in either the periodic or non-period + struct list_head qh_list_entry; struct list_head qh_list_entry; +} dwc_otg_qh_t; } dwc_otg_qh_t; + +/** /** + * This structure holds the state of the HCD, including the n * This structure holds the state of the HCD, including the n + * periodic schedules. * periodic schedules. + */ */ +typedef struct dwc_otg_hcd { typedef struct dwc_otg_hcd { + + spinlock_t lock; spinlock_t lock; + + /** DWC OTG Core Interface Layer */ /** DWC OTG Core Interface Layer */ + dwc_otg_core_if_t *core_if; dwc_otg_core_if_t *core_if; + + /** Internal DWC HCD Flags */ /** Internal DWC HCD Flags */ + volatile union dwc_otg_hcd_internal_flags { volatile union dwc_otg_hcd_internal_flags { + uint32_t d32; uint32_t d32; + struct { struct { + unsigned port_connect_status_change : unsigned port_connect_status_change : + unsigned port_connect_status : 1; unsigned port_connect_status : 1; + unsigned port_reset_change : 1; unsigned port_reset_change : 1; + unsigned port_enable_change : 1; unsigned port_enable_change : 1; + unsigned port_suspend_change : 1; unsigned port_suspend_change : 1; + unsigned port_over_current_change : 1 unsigned port_over_current_change : 1 + unsigned reserved : 27; unsigned reserved : 27; + } b; } b; + } flags; } flags; + + /** /** + * Inactive items in the non-periodic schedule. This * Inactive items in the non-periodic schedule. This + * Queue Heads. Transfers associated with these Queue * Queue Heads. Transfers associated with these Queue + * currently assigned to a host channel. * currently assigned to a host channel. + */ */ + struct list_head non_periodic_sched_inactive; struct list_head non_periodic_sched_inactive; + + /** /** + * Deferred items in the non-periodic schedule. This * Deferred items in the non-periodic schedule. This + * Queue Heads. Transfers associated with these Queue * Queue Heads. Transfers associated with these Queue + * currently assigned to a host channel. * currently assigned to a host channel. + * When we get an NAK, the QH goes here. * When we get an NAK, the QH goes here. + */ */ + struct list_head non_periodic_sched_deferred; struct list_head non_periodic_sched_deferred; + + /** /** + * Active items in the non-periodic schedule. This is * Active items in the non-periodic schedule. This is + * Queue Heads. Transfers associated with these Queue * Queue Heads. Transfers associated with these Queue + * currently assigned to a host channel. * currently assigned to a host channel. + */ */ + struct list_head non_periodic_sched_active; struct list_head non_periodic_sched_active; + + /** /** + * Pointer to the next Queue Head to process in the a * Pointer to the next Queue Head to process in the a + * non-periodic schedule. * non-periodic schedule. + */ */ + struct list_head *non_periodic_qh_ptr; struct list_head *non_periodic_qh_ptr; + + /** /** + * Inactive items in the periodic schedule. This is a * Inactive items in the periodic schedule. This is a + * periodic transfers that are _not_ scheduled for th * periodic transfers that are _not_ scheduled for th + * Each QH in the list has an interval counter that d * Each QH in the list has an interval counter that d + * needs to be scheduled for execution. This scheduli * needs to be scheduled for execution. This scheduli + * allows only a simple calculation for periodic band * allows only a simple calculation for periodic band + * must assume that all periodic transfers may need t * must assume that all periodic transfers may need t + * same frame). However, it greatly simplifies schedu * same frame). However, it greatly simplifies schedu + * be sufficient for the vast majority of OTG hosts, * be sufficient for the vast majority of OTG hosts, + * connect to a small number of peripherals at one ti * connect to a small number of peripherals at one ti + * * + * Items move from this list to periodic_sched_ready * Items move from this list to periodic_sched_ready + * interval counter is 0 at SOF. * interval counter is 0 at SOF. + */ */ + struct list_head periodic_sched_inactive; struct list_head periodic_sched_inactive; + + /** /** + * List of periodic QHs that are ready for execution * List of periodic QHs that are ready for execution + * frame, but have not yet been assigned to host chan * frame, but have not yet been assigned to host chan + * * + * Items move from this list to periodic_sched_assign * Items move from this list to periodic_sched_assign + * channels become available during the current frame * channels become available during the current frame + */ */ + struct list_head periodic_sched_ready; struct list_head periodic_sched_ready; + + /** /** + * List of periodic QHs to be executed in the next fr * List of periodic QHs to be executed in the next fr + * assigned to host channels. * assigned to host channels. + * * + * Items move from this list to periodic_sched_queued * Items move from this list to periodic_sched_queued + * transactions for the QH are queued to the DWC_otg * transactions for the QH are queued to the DWC_otg + */ */ + struct list_head periodic_sched_assigned; struct list_head periodic_sched_assigned; + + /** /** + * List of periodic QHs that have been queued for exe * List of periodic QHs that have been queued for exe + * * + * Items move from this list to either periodic_sched * Items move from this list to either periodic_sched + * periodic_sched_ready when the channel associated w * periodic_sched_ready when the channel associated w + * is released. If the interval for the QH is 1, the * is released. If the interval for the QH is 1, the + * periodic_sched_ready because it must be reschedule * periodic_sched_ready because it must be reschedule + * frame. Otherwise, the item moves to periodic_sched * frame. Otherwise, the item moves to periodic_sched + */ */ + struct list_head periodic_sched_queued; struct list_head periodic_sched_queued; + + /** /** + * Total bandwidth claimed so far for periodic transf * Total bandwidth claimed so far for periodic transf + * is in microseconds per (micro)frame. The assumptio * is in microseconds per (micro)frame. The assumptio + * periodic transfers may occur in the same (micro)fr * periodic transfers may occur in the same (micro)fr + */ */ + uint16_t periodic_usecs; uint16_t periodic_usecs; + + /** < + * Total bandwidth claimed so far for all periodic tr < + * in a frame. < + * This will include a mixture of HS and FS transfers < + * Units are microseconds per (micro)frame. < + * We have a budget per frame and have to schedule < + * transactions accordingly. < + * Watch out for the fact that things are actually sc < + * "next frame". < + */ < + uint16_t frame_usecs[8]; < + < + /** /** + * Frame number read from the core at SOF. The value * Frame number read from the core at SOF. The value + * DWC_HFNUM_MAX_FRNUM. * DWC_HFNUM_MAX_FRNUM. + */ */ + uint16_t frame_number; uint16_t frame_number; + + /** /** + * Free host channels in the controller. This is a li * Free host channels in the controller. This is a li + * dwc_hc_t items. * dwc_hc_t items. + */ */ + struct list_head free_hc_list; struct list_head free_hc_list; + + /** /** + * Number of available host channels. | * Number of host channels assigned to periodic trans + > * assuming that there is a dedicated host channel fo + > * transaction and at least one host channel availabl + > * non-periodic transactions. + > */ + > int periodic_channels; + > + > /** + > * Number of host channels assigned to non-periodic t + */ */ + int available_host_channels; | int non_periodic_channels; + + /** /** + * Array of pointers to the host channel descriptors. * Array of pointers to the host channel descriptors. + * a host channel descriptor given the host channel n * a host channel descriptor given the host channel n + * useful in interrupt handlers. * useful in interrupt handlers. + */ */ + dwc_hc_t *hc_ptr_array[MAX_EPS_CHANNEL dwc_hc_t *hc_ptr_array[MAX_EPS_CHANNEL + + /** /** + * Buffer to use for any data received during the sta * Buffer to use for any data received during the sta + * control transfer. Normally no data is transferred * control transfer. Normally no data is transferred + * phase. This buffer is used as a bit bucket. * phase. This buffer is used as a bit bucket. + */ */ + uint8_t *status_buf; uint8_t *status_buf; + + /** /** + * DMA address for status_buf. * DMA address for status_buf. + */ */ + dma_addr_t status_buf_dma; dma_addr_t status_buf_dma; +#define DWC_OTG_HCD_STATUS_BUF_SIZE 64 #define DWC_OTG_HCD_STATUS_BUF_SIZE 64 + + /** /** + * Structure to allow starting the HCD in a non-inter * Structure to allow starting the HCD in a non-inter + * during an OTG role change. * during an OTG role change. + */ */ + struct work_struct start_work; struct work_struct start_work; + struct usb_hcd *_p; struct usb_hcd *_p; + + /** /** + * Connection timer. An OTG host must display a messa * Connection timer. An OTG host must display a messa + * does not connect. Started when the VBus power is t * does not connect. Started when the VBus power is t + * sysfs attribute "buspower". * sysfs attribute "buspower". + */ */ + struct timer_list conn_timer; struct timer_list conn_timer; + + /* Tasket to do a reset */ /* Tasket to do a reset */ + struct tasklet_struct *reset_tasklet; struct tasklet_struct *reset_tasklet; + +#ifdef CONFIG_DWC_DEBUG #ifdef CONFIG_DWC_DEBUG + uint32_t frrem_samples; uint32_t frrem_samples; + uint64_t frrem_accum; uint64_t frrem_accum; + + uint32_t hfnum_7_samples_a; uint32_t hfnum_7_samples_a; + uint64_t hfnum_7_frrem_accum_a; uint64_t hfnum_7_frrem_accum_a; + uint32_t hfnum_0_samples_a; uint32_t hfnum_0_samples_a; + uint64_t hfnum_0_frrem_accum_a; uint64_t hfnum_0_frrem_accum_a; + uint32_t hfnum_other_samples_a; uint32_t hfnum_other_samples_a; + uint64_t hfnum_other_frrem_accum_a; uint64_t hfnum_other_frrem_accum_a; + + uint32_t hfnum_7_samples_b; uint32_t hfnum_7_samples_b; + uint64_t hfnum_7_frrem_accum_b; uint64_t hfnum_7_frrem_accum_b; + uint32_t hfnum_0_samples_b; uint32_t hfnum_0_samples_b; + uint64_t hfnum_0_frrem_accum_b; uint64_t hfnum_0_frrem_accum_b; + uint32_t hfnum_other_samples_b; uint32_t hfnum_other_samples_b; + uint64_t hfnum_other_frrem_accum_b; uint64_t hfnum_other_frrem_accum_b; +#endif #endif + +} dwc_otg_hcd_t; } dwc_otg_hcd_t; + +/** Gets the dwc_otg_hcd from a struct usb_hcd */ /** Gets the dwc_otg_hcd from a struct usb_hcd */ +static inline dwc_otg_hcd_t *hcd_to_dwc_otg_hcd(struct usb_hc static inline dwc_otg_hcd_t *hcd_to_dwc_otg_hcd(struct usb_hc +{ { + return (dwc_otg_hcd_t *)(hcd->hcd_priv); return (dwc_otg_hcd_t *)(hcd->hcd_priv); +} } + +/** Gets the struct usb_hcd that contains a dwc_otg_hcd_t. */ /** Gets the struct usb_hcd that contains a dwc_otg_hcd_t. */ +static inline struct usb_hcd *dwc_otg_hcd_to_hcd(dwc_otg_hcd_ static inline struct usb_hcd *dwc_otg_hcd_to_hcd(dwc_otg_hcd_ +{ { + return container_of((void *)dwc_otg_hcd, struct usb_h return container_of((void *)dwc_otg_hcd, struct usb_h +} } + +/** @name HCD Create/Destroy Functions */ /** @name HCD Create/Destroy Functions */ +/** @{ */ /** @{ */ +extern int __init dwc_otg_hcd_init(struct device *_dev, dwc_ extern int __init dwc_otg_hcd_init(struct device *_dev, dwc_ +extern void dwc_otg_hcd_remove(struct device *_dev); extern void dwc_otg_hcd_remove(struct device *_dev); +/** @} */ /** @} */ + +/** @name Linux HC Driver API Functions */ /** @name Linux HC Driver API Functions */ +/** @{ */ /** @{ */ + +extern int dwc_otg_hcd_start(struct usb_hcd *hcd); extern int dwc_otg_hcd_start(struct usb_hcd *hcd); +extern void dwc_otg_hcd_stop(struct usb_hcd *hcd); extern void dwc_otg_hcd_stop(struct usb_hcd *hcd); +extern int dwc_otg_hcd_get_frame_number(struct usb_hcd *hcd); extern int dwc_otg_hcd_get_frame_number(struct usb_hcd *hcd); +extern void dwc_otg_hcd_free(struct usb_hcd *hcd); extern void dwc_otg_hcd_free(struct usb_hcd *hcd); +extern int dwc_otg_hcd_urb_enqueue(struct usb_hcd *hcd, extern int dwc_otg_hcd_urb_enqueue(struct usb_hcd *hcd, + struct urb *urb, struct urb *urb, + gfp_t mem_flags); gfp_t mem_flags); +extern int dwc_otg_hcd_urb_dequeue(struct usb_hcd *hcd, extern int dwc_otg_hcd_urb_dequeue(struct usb_hcd *hcd, +/* struct usb_host_endpoint * /* struct usb_host_endpoint * + struct urb *urb, int statu struct urb *urb, int statu +extern void dwc_otg_hcd_endpoint_disable(struct usb_hcd *hcd, extern void dwc_otg_hcd_endpoint_disable(struct usb_hcd *hcd, + struct usb_host_endp struct usb_host_endp +extern irqreturn_t dwc_otg_hcd_irq(struct usb_hcd *hcd); extern irqreturn_t dwc_otg_hcd_irq(struct usb_hcd *hcd); +extern int dwc_otg_hcd_hub_status_data(struct usb_hcd *hcd, extern int dwc_otg_hcd_hub_status_data(struct usb_hcd *hcd, + char *buf); char *buf); +extern int dwc_otg_hcd_hub_control(struct usb_hcd *hcd, extern int dwc_otg_hcd_hub_control(struct usb_hcd *hcd, + u16 typeReq, u16 typeReq, + u16 wValue, u16 wValue, + u16 wIndex, u16 wIndex, + char *buf, char *buf, + u16 wLength); u16 wLength); + +/** @} */ /** @} */ + +/** @name Transaction Execution Functions */ /** @name Transaction Execution Functions */ +/** @{ */ /** @{ */ +extern dwc_otg_transaction_type_e dwc_otg_hcd_select_transact extern dwc_otg_transaction_type_e dwc_otg_hcd_select_transact +extern void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t *_hc extern void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t *_hc + dwc_otg_transactio dwc_otg_transactio +extern void dwc_otg_hcd_complete_urb(dwc_otg_hcd_t *_hcd, str extern void dwc_otg_hcd_complete_urb(dwc_otg_hcd_t *_hcd, str + int _status); int _status); +/** @} */ /** @} */ + +/** @name Interrupt Handler Functions */ /** @name Interrupt Handler Functions */ +/** @{ */ /** @{ */ +extern int32_t dwc_otg_hcd_handle_intr (dwc_otg_hcd_t *_dwc_o extern int32_t dwc_otg_hcd_handle_intr (dwc_otg_hcd_t *_dwc_o +extern int32_t dwc_otg_hcd_handle_sof_intr (dwc_otg_hcd_t *_d extern int32_t dwc_otg_hcd_handle_sof_intr (dwc_otg_hcd_t *_d +extern int32_t dwc_otg_hcd_handle_rx_status_q_level_intr (dwc extern int32_t dwc_otg_hcd_handle_rx_status_q_level_intr (dwc +extern int32_t dwc_otg_hcd_handle_np_tx_fifo_empty_intr (dwc_ extern int32_t dwc_otg_hcd_handle_np_tx_fifo_empty_intr (dwc_ +extern int32_t dwc_otg_hcd_handle_perio_tx_fifo_empty_intr (d extern int32_t dwc_otg_hcd_handle_perio_tx_fifo_empty_intr (d +extern int32_t dwc_otg_hcd_handle_incomplete_periodic_intr(dw extern int32_t dwc_otg_hcd_handle_incomplete_periodic_intr(dw +extern int32_t dwc_otg_hcd_handle_port_intr (dwc_otg_hcd_t *_ extern int32_t dwc_otg_hcd_handle_port_intr (dwc_otg_hcd_t *_ +extern int32_t dwc_otg_hcd_handle_conn_id_status_change_intr extern int32_t dwc_otg_hcd_handle_conn_id_status_change_intr +extern int32_t dwc_otg_hcd_handle_disconnect_intr (dwc_otg_hc extern int32_t dwc_otg_hcd_handle_disconnect_intr (dwc_otg_hc +extern int32_t dwc_otg_hcd_handle_hc_intr (dwc_otg_hcd_t *_dw extern int32_t dwc_otg_hcd_handle_hc_intr (dwc_otg_hcd_t *_dw +extern int32_t dwc_otg_hcd_handle_hc_n_intr (dwc_otg_hcd_t *_ extern int32_t dwc_otg_hcd_handle_hc_n_intr (dwc_otg_hcd_t *_ +extern int32_t dwc_otg_hcd_handle_session_req_intr (dwc_otg_h extern int32_t dwc_otg_hcd_handle_session_req_intr (dwc_otg_h +extern int32_t dwc_otg_hcd_handle_wakeup_detected_intr (dwc_o extern int32_t dwc_otg_hcd_handle_wakeup_detected_intr (dwc_o +/** @} */ /** @} */ + + +/** @name Schedule Queue Functions */ /** @name Schedule Queue Functions */ +/** @{ */ /** @{ */ + +/* Implemented in dwc_otg_hcd_queue.c */ /* Implemented in dwc_otg_hcd_queue.c */ +extern dwc_otg_qh_t *dwc_otg_hcd_qh_create (dwc_otg_hcd_t *_h extern dwc_otg_qh_t *dwc_otg_hcd_qh_create (dwc_otg_hcd_t *_h +extern void dwc_otg_hcd_qh_init (dwc_otg_hcd_t *_hcd, dwc_otg extern void dwc_otg_hcd_qh_init (dwc_otg_hcd_t *_hcd, dwc_otg +extern void dwc_otg_hcd_qh_free (dwc_otg_qh_t *_qh); extern void dwc_otg_hcd_qh_free (dwc_otg_qh_t *_qh); +extern int dwc_otg_hcd_qh_add (dwc_otg_hcd_t *_hcd, dwc_otg_q extern int dwc_otg_hcd_qh_add (dwc_otg_hcd_t *_hcd, dwc_otg_q +extern void dwc_otg_hcd_qh_remove (dwc_otg_hcd_t *_hcd, dwc_o extern void dwc_otg_hcd_qh_remove (dwc_otg_hcd_t *_hcd, dwc_o +extern void dwc_otg_hcd_qh_deactivate (dwc_otg_hcd_t *_hcd, d extern void dwc_otg_hcd_qh_deactivate (dwc_otg_hcd_t *_hcd, d +extern int dwc_otg_hcd_qh_deferr (dwc_otg_hcd_t *_hcd, dwc_ot extern int dwc_otg_hcd_qh_deferr (dwc_otg_hcd_t *_hcd, dwc_ot + +/** Remove and free a QH */ /** Remove and free a QH */ +static inline void dwc_otg_hcd_qh_remove_and_free (dwc_otg_hc static inline void dwc_otg_hcd_qh_remove_and_free (dwc_otg_hc + dwc_otg_qh dwc_otg_qh +{ { + dwc_otg_hcd_qh_remove (_hcd, _qh); dwc_otg_hcd_qh_remove (_hcd, _qh); + dwc_otg_hcd_qh_free (_qh); dwc_otg_hcd_qh_free (_qh); +} } + +/** Allocates memory for a QH structure. /** Allocates memory for a QH structure. + * @return Returns the memory allocate or NULL on error. */ * @return Returns the memory allocate or NULL on error. */ +static inline dwc_otg_qh_t *dwc_otg_hcd_qh_alloc (void) static inline dwc_otg_qh_t *dwc_otg_hcd_qh_alloc (void) +{ { + return (dwc_otg_qh_t *) kmalloc (sizeof(dwc_otg_qh_t) return (dwc_otg_qh_t *) kmalloc (sizeof(dwc_otg_qh_t) +} } + +extern dwc_otg_qtd_t *dwc_otg_hcd_qtd_create (struct urb *urb extern dwc_otg_qtd_t *dwc_otg_hcd_qtd_create (struct urb *urb +extern void dwc_otg_hcd_qtd_init (dwc_otg_qtd_t *qtd, struct extern void dwc_otg_hcd_qtd_init (dwc_otg_qtd_t *qtd, struct +extern int dwc_otg_hcd_qtd_add (dwc_otg_qtd_t *qtd, dwc_otg_h extern int dwc_otg_hcd_qtd_add (dwc_otg_qtd_t *qtd, dwc_otg_h + +/** Allocates memory for a QTD structure. /** Allocates memory for a QTD structure. + * @return Returns the memory allocate or NULL on error. */ * @return Returns the memory allocate or NULL on error. */ +static inline dwc_otg_qtd_t *dwc_otg_hcd_qtd_alloc (void) static inline dwc_otg_qtd_t *dwc_otg_hcd_qtd_alloc (void) +{ { + return (dwc_otg_qtd_t *) kmalloc (sizeof(dwc_otg_qtd_ return (dwc_otg_qtd_t *) kmalloc (sizeof(dwc_otg_qtd_ +} } + +/** Frees the memory for a QTD structure. QTD should already /** Frees the memory for a QTD structure. QTD should already + * list. * list. + * @param[in] _qtd QTD to free.*/ * @param[in] _qtd QTD to free.*/ +static inline void dwc_otg_hcd_qtd_free (dwc_otg_qtd_t *_qtd) static inline void dwc_otg_hcd_qtd_free (dwc_otg_qtd_t *_qtd) +{ { + kfree (_qtd); kfree (_qtd); +} } + +/** Removes a QTD from list. /** Removes a QTD from list. + * @param[in] _qtd QTD to remove from list. */ * @param[in] _qtd QTD to remove from list. */ +static inline void dwc_otg_hcd_qtd_remove (dwc_otg_qtd_t *_qt static inline void dwc_otg_hcd_qtd_remove (dwc_otg_qtd_t *_qt +{ { + unsigned long flags; unsigned long flags; + local_irq_save (flags); local_irq_save (flags); + list_del (&_qtd->qtd_list_entry); list_del (&_qtd->qtd_list_entry); + local_irq_restore (flags); local_irq_restore (flags); +} } + +/** Remove and free a QTD */ /** Remove and free a QTD */ +static inline void dwc_otg_hcd_qtd_remove_and_free (dwc_otg_q static inline void dwc_otg_hcd_qtd_remove_and_free (dwc_otg_q +{ { + dwc_otg_hcd_qtd_remove (_qtd); dwc_otg_hcd_qtd_remove (_qtd); + dwc_otg_hcd_qtd_free (_qtd); dwc_otg_hcd_qtd_free (_qtd); +} } + +/** @} */ /** @} */ + + +/** @name Internal Functions */ /** @name Internal Functions */ +/** @{ */ /** @{ */ +dwc_otg_qh_t *dwc_urb_to_qh(struct urb *_urb); dwc_otg_qh_t *dwc_urb_to_qh(struct urb *_urb); +void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t *_hcd); void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t *_hcd); +void dwc_otg_hcd_dump_state(dwc_otg_hcd_t *_hcd); void dwc_otg_hcd_dump_state(dwc_otg_hcd_t *_hcd); +/** @} */ /** @} */ + +/** Gets the usb_host_endpoint associated with an URB. */ /** Gets the usb_host_endpoint associated with an URB. */ +static inline struct usb_host_endpoint *dwc_urb_to_endpoint(s static inline struct usb_host_endpoint *dwc_urb_to_endpoint(s +{ { + struct usb_device *dev = _urb->dev; struct usb_device *dev = _urb->dev; + int ep_num = usb_pipeendpoint(_urb->pipe); int ep_num = usb_pipeendpoint(_urb->pipe); + + if (usb_pipein(_urb->pipe)) if (usb_pipein(_urb->pipe)) + return dev->ep_in[ep_num]; return dev->ep_in[ep_num]; + else else + return dev->ep_out[ep_num]; return dev->ep_out[ep_num]; +} } + +/** /** + * Gets the endpoint number from a _bEndpointAddress argument * Gets the endpoint number from a _bEndpointAddress argument + * qualified with its direction (possible 32 endpoints per de * qualified with its direction (possible 32 endpoints per de + */ */ +#define dwc_ep_addr_to_endpoint(_bEndpointAddress_) \ #define dwc_ep_addr_to_endpoint(_bEndpointAddress_) \ + ((_bEndpointAddress_ & USB_ENDPOINT_NUMBER_MASK) | \ ((_bEndpointAddress_ & USB_ENDPOINT_NUMBER_MASK) | \ + ((_bEndpointAddress_ & USB_DIR_IN) != 0) << 4) ((_bEndpointAddress_ & USB_DIR_IN) != 0) << 4) + +/** Gets the QH that contains the list_head */ /** Gets the QH that contains the list_head */ +#define dwc_list_to_qh(_list_head_ptr_) (container_of(_list_h #define dwc_list_to_qh(_list_head_ptr_) (container_of(_list_h + +/** Gets the QTD that contains the list_head */ /** Gets the QTD that contains the list_head */ +#define dwc_list_to_qtd(_list_head_ptr_) (container_of(_list_ #define dwc_list_to_qtd(_list_head_ptr_) (container_of(_list_ + +/** Check if QH is non-periodic */ /** Check if QH is non-periodic */ +#define dwc_qh_is_non_per(_qh_ptr_) ((_qh_ptr_->ep_type == US #define dwc_qh_is_non_per(_qh_ptr_) ((_qh_ptr_->ep_type == US + (_qh_ptr_->ep_type == US (_qh_ptr_->ep_type == US + +/** High bandwidth multiplier as encoded in highspeed endpoin /** High bandwidth multiplier as encoded in highspeed endpoin +#define dwc_hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) > #define dwc_hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) > + +/** Packet size for any kind of endpoint descriptor */ /** Packet size for any kind of endpoint descriptor */ +#define dwc_max_packet(wMaxPacketSize) ((wMaxPacketSize) & 0x #define dwc_max_packet(wMaxPacketSize) ((wMaxPacketSize) & 0x + +/** /** + * Returns true if _frame1 is less than or equal to _frame2. * Returns true if _frame1 is less than or equal to _frame2. + * done modulo DWC_HFNUM_MAX_FRNUM. This accounts for the rol * done modulo DWC_HFNUM_MAX_FRNUM. This accounts for the rol + * frame number when the max frame number is reached. * frame number when the max frame number is reached. + */ */ +static inline int dwc_frame_num_le(uint16_t _frame1, uint16_t static inline int dwc_frame_num_le(uint16_t _frame1, uint16_t +{ { + return ((_frame2 - _frame1) & DWC_HFNUM_MAX_FRNUM) <= return ((_frame2 - _frame1) & DWC_HFNUM_MAX_FRNUM) <= + (DWC_HFNUM_MAX_FRNUM >> 1); (DWC_HFNUM_MAX_FRNUM >> 1); +} } + +/** /** + * Returns true if _frame1 is greater than _frame2. The compa * Returns true if _frame1 is greater than _frame2. The compa + * modulo DWC_HFNUM_MAX_FRNUM. This accounts for the rollover * modulo DWC_HFNUM_MAX_FRNUM. This accounts for the rollover + * number when the max frame number is reached. * number when the max frame number is reached. + */ */ +static inline int dwc_frame_num_gt(uint16_t _frame1, uint16_t static inline int dwc_frame_num_gt(uint16_t _frame1, uint16_t +{ { + return (_frame1 != _frame2) && return (_frame1 != _frame2) && + (((_frame1 - _frame2) & DWC_HFNUM_MAX_FRNUM) (((_frame1 - _frame2) & DWC_HFNUM_MAX_FRNUM) + (DWC_HFNUM_MAX_FRNUM >> 1)); (DWC_HFNUM_MAX_FRNUM >> 1)); +} } + +/** /** + * Increments _frame by the amount specified by _inc. The add * Increments _frame by the amount specified by _inc. The add + * modulo DWC_HFNUM_MAX_FRNUM. Returns the incremented value. * modulo DWC_HFNUM_MAX_FRNUM. Returns the incremented value. + */ */ +static inline uint16_t dwc_frame_num_inc(uint16_t _frame, uin static inline uint16_t dwc_frame_num_inc(uint16_t _frame, uin +{ { + return (_frame + _inc) & DWC_HFNUM_MAX_FRNUM; return (_frame + _inc) & DWC_HFNUM_MAX_FRNUM; +} } + +static inline uint16_t dwc_full_frame_num (uint16_t _frame) static inline uint16_t dwc_full_frame_num (uint16_t _frame) +{ { + return ((_frame) & DWC_HFNUM_MAX_FRNUM) >> 3; return ((_frame) & DWC_HFNUM_MAX_FRNUM) >> 3; +} } + +static inline uint16_t dwc_micro_frame_num (uint16_t _frame) static inline uint16_t dwc_micro_frame_num (uint16_t _frame) +{ { + return (_frame) & 0x7; return (_frame) & 0x7; +} } + +#ifdef CONFIG_DWC_DEBUG #ifdef CONFIG_DWC_DEBUG +/** /** + * Macro to sample the remaining PHY clocks left in the curre * Macro to sample the remaining PHY clocks left in the curre + * may be used during debugging to determine the average time * may be used during debugging to determine the average time + * execute sections of code. There are two possible sample po * execute sections of code. There are two possible sample po + * "b", so the _letter argument must be one of these values. * "b", so the _letter argument must be one of these values. + * * + * To dump the average sample times, read the "hcd_frrem" sys * To dump the average sample times, read the "hcd_frrem" sys + * example, "cat /sys/devices/lm0/hcd_frrem". * example, "cat /sys/devices/lm0/hcd_frrem". + */ */ +#define dwc_sample_frrem(_hcd, _qh, _letter) \ #define dwc_sample_frrem(_hcd, _qh, _letter) \ +{ \ { \ + hfnum_data_t hfnum; \ hfnum_data_t hfnum; \ + dwc_otg_qtd_t *qtd; \ dwc_otg_qtd_t *qtd; \ + qtd = list_entry(_qh->qtd_list.next, dwc_otg_qtd_t, q qtd = list_entry(_qh->qtd_list.next, dwc_otg_qtd_t, q + if (usb_pipeint(qtd->urb->pipe) && _qh->start_split_f if (usb_pipeint(qtd->urb->pipe) && _qh->start_split_f + hfnum.d32 = dwc_read_reg32(&_hcd->core_if->ho hfnum.d32 = dwc_read_reg32(&_hcd->core_if->ho + switch (hfnum.b.frnum & 0x7) { \ switch (hfnum.b.frnum & 0x7) { \ + case 7: \ case 7: \ + _hcd->hfnum_7_samples_##_letter++; \ _hcd->hfnum_7_samples_##_letter++; \ + _hcd->hfnum_7_frrem_accum_##_letter + _hcd->hfnum_7_frrem_accum_##_letter + + break; \ break; \ + case 0: \ case 0: \ + _hcd->hfnum_0_samples_##_letter++; \ _hcd->hfnum_0_samples_##_letter++; \ + _hcd->hfnum_0_frrem_accum_##_letter + _hcd->hfnum_0_frrem_accum_##_letter + + break; \ break; \ + default: \ default: \ + _hcd->hfnum_other_samples_##_letter++ _hcd->hfnum_other_samples_##_letter++ + _hcd->hfnum_other_frrem_accum_##_lett _hcd->hfnum_other_frrem_accum_##_lett + break; \ break; \ + } \ } \ + } \ } \ +} } +#else #else +#define dwc_sample_frrem(_hcd, _qh, _letter) #define dwc_sample_frrem(_hcd, _qh, _letter) +#endif #endif +#endif #endif +#endif /* DWC_DEVICE_ONLY */ #endif /* DWC_DEVICE_ONLY */ diff --git a/drivers/usb/gadget/dwc_otg/sdiff/dwc_otg_hcd_intr.c.sdiff b/drivers/usb/gadget/dwc_otg/sdiff/dwc_otg_hcd_intr.c.sdiff new file mode 100644 index 00000000000..990bcc6a419 --- /dev/null +++ b/drivers/usb/gadget/dwc_otg/sdiff/dwc_otg_hcd_intr.c.sdiff @@ -0,0 +1,1763 @@ +/* ========================================================== /* ========================================================== + * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers + * $Revision: #7 $ * $Revision: #7 $ + * $Date: 2005/11/02 $ * $Date: 2005/11/02 $ + * $Change: 553126 $ * $Change: 553126 $ + * * + * Synopsys HS OTG Linux Software Driver and documentation (h * Synopsys HS OTG Linux Software Driver and documentation (h + * "Software") is an Unsupported proprietary work of Synopsys * "Software") is an Unsupported proprietary work of Synopsys + * otherwise expressly agreed to in writing between Synopsys * otherwise expressly agreed to in writing between Synopsys + * * + * The Software IS NOT an item of Licensed Software or Licens * The Software IS NOT an item of Licensed Software or Licens + * any End User Software License Agreement or Agreement for L * any End User Software License Agreement or Agreement for L + * with Synopsys or any supplement thereto. You are permitted * with Synopsys or any supplement thereto. You are permitted + * redistribute this Software in source and binary forms, wit * redistribute this Software in source and binary forms, wit + * modification, provided that redistributions of source code * modification, provided that redistributions of source code + * notice. You may not view, use, disclose, copy or distribut * notice. You may not view, use, disclose, copy or distribut + * any information contained herein except pursuant to this l * any information contained herein except pursuant to this l + * Synopsys. If you do not agree with this notice, including * Synopsys. If you do not agree with this notice, including + * below, then you are not authorized to use the Software. * below, then you are not authorized to use the Software. + * * + * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON A * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON A + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PA * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PA + * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABL * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABL + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTER * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARI * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARI + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE PO * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE PO + * DAMAGE. * DAMAGE. + * ========================================================== * ========================================================== + +#ifndef CONFIG_DWC_DEVICE_ONLY #ifndef CONFIG_DWC_DEVICE_ONLY + +#include "dwc_otg_driver.h" #include "dwc_otg_driver.h" +#include "dwc_otg_hcd.h" #include "dwc_otg_hcd.h" +#include "dwc_otg_regs.h" #include "dwc_otg_regs.h" + +const int erratum_usb09_patched = 0; const int erratum_usb09_patched = 0; +const int deferral_on = 1; const int deferral_on = 1; +const int nak_deferral_delay = 8; | int nak_deferral_delay = 20; + > module_param(nak_deferral_delay, int, 0644); +const int nyet_deferral_delay = 1; const int nyet_deferral_delay = 1; + +/** @file /** @file + * This file contains the implementation of the HCD Interrupt * This file contains the implementation of the HCD Interrupt + */ */ + +/** This function handles interrupts for the HCD. */ /** This function handles interrupts for the HCD. */ +int32_t dwc_otg_hcd_handle_intr(dwc_otg_hcd_t * _dwc_otg_hcd) int32_t dwc_otg_hcd_handle_intr(dwc_otg_hcd_t * _dwc_otg_hcd) +{ { + int retval = 0; int retval = 0; + dwc_otg_core_if_t * core_if = _dwc_otg_hcd->core_if; dwc_otg_core_if_t * core_if = _dwc_otg_hcd->core_if; + gintsts_data_t gintsts; gintsts_data_t gintsts; + +#ifdef CONFIG_DWC_DEBUG #ifdef CONFIG_DWC_DEBUG + dwc_otg_core_global_regs_t * global_regs = core_if->core_ dwc_otg_core_global_regs_t * global_regs = core_if->core_ + +#endif /* */ #endif /* */ + + /* Check if HOST Mode */ /* Check if HOST Mode */ + if (dwc_otg_is_host_mode(core_if)) { if (dwc_otg_is_host_mode(core_if)) { + gintsts.d32 = dwc_otg_read_core_intr(core_if) gintsts.d32 = dwc_otg_read_core_intr(core_if) + if (!gintsts.d32) { if (!gintsts.d32) { + return 0; return 0; + } } +#ifdef CONFIG_DWC_DEBUG #ifdef CONFIG_DWC_DEBUG + /* Don't print debug message in the interrupt han /* Don't print debug message in the interrupt han +#ifndef DEBUG_SOF #ifndef DEBUG_SOF + if (gintsts.d32 != DWC_SOF_INTR_MASK) if (gintsts.d32 != DWC_SOF_INTR_MASK) +#endif #endif + DWC_DEBUGPL(DBG_HCD, "\n"); DWC_DEBUGPL(DBG_HCD, "\n"); +#endif /* */ #endif /* */ + +#ifdef CONFIG_DWC_DEBUG #ifdef CONFIG_DWC_DEBUG +#ifndef DEBUG_SOF #ifndef DEBUG_SOF + if (gintsts.d32 != DWC_SOF_INTR_MASK) if (gintsts.d32 != DWC_SOF_INTR_MASK) +#endif #endif + DWC_DEBUGPL(DBG_HCD,"DWC OTG HCD Interrup DWC_DEBUGPL(DBG_HCD,"DWC OTG HCD Interrup + gintsts.d32); gintsts.d32); +#endif /* */ #endif /* */ + if (gintsts.b.sofintr) { if (gintsts.b.sofintr) { + retval |= dwc_otg_hcd_handle_sof_intr retval |= dwc_otg_hcd_handle_sof_intr + } } +#ifdef CONFIG_OTG_PLB_DMA_TASKLET #ifdef CONFIG_OTG_PLB_DMA_TASKLET + if (!atomic_read(&release_later) && gintsts.b if (!atomic_read(&release_later) && gintsts.b +#else #else + if (gintsts.b.rxstsqlvl) { if (gintsts.b.rxstsqlvl) { +#endif #endif + retval |= dwc_otg_hcd_handle_rx_statu retval |= dwc_otg_hcd_handle_rx_statu + } } +#ifdef CONFIG_OTG_PLB_DMA_TASKLET #ifdef CONFIG_OTG_PLB_DMA_TASKLET + if (!atomic_read(&release_later) && gintsts.b if (!atomic_read(&release_later) && gintsts.b +#else #else + if (gintsts.b.nptxfempty) { if (gintsts.b.nptxfempty) { +#endif #endif + retval |= dwc_otg_hcd_handle_np_tx_fi retval |= dwc_otg_hcd_handle_np_tx_fi + } } + if (gintsts.b.i2cintr) { if (gintsts.b.i2cintr) { + /** @todo Implement i2cintr handler. /** @todo Implement i2cintr handler. + } } + if (gintsts.b.portintr) { if (gintsts.b.portintr) { + retval |= dwc_otg_hcd_handle_port_int retval |= dwc_otg_hcd_handle_port_int + } } + if (gintsts.b.hcintr) { if (gintsts.b.hcintr) { + retval |= dwc_otg_hcd_handle_hc_intr( retval |= dwc_otg_hcd_handle_hc_intr( + } } + if (gintsts.b.ptxfempty) { if (gintsts.b.ptxfempty) { + retval |= dwc_otg_hcd_handle_perio_tx retval |= dwc_otg_hcd_handle_perio_tx + } } + +#ifdef CONFIG_DWC_DEBUG #ifdef CONFIG_DWC_DEBUG +#ifndef DEBUG_SOF #ifndef DEBUG_SOF + if (gintsts.d32 != DWC_SOF_INTR_MASK) if (gintsts.d32 != DWC_SOF_INTR_MASK) +#endif #endif + { { + DWC_DEBUGPL(DBG_HCD, DWC_DEBUGPL(DBG_HCD, + "DWC OTG HCD Finished Se "DWC OTG HCD Finished Se + DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD gi DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD gi + dwc_read_reg32(&global_r dwc_read_reg32(&global_r + DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD gi DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD gi + dwc_read_reg32(&global_r dwc_read_reg32(&global_r + } } +#endif /* */ #endif /* */ + +#ifdef CONFIG_DWC_DEBUG #ifdef CONFIG_DWC_DEBUG +#ifndef DEBUG_SOF #ifndef DEBUG_SOF + if (gintsts.d32 != DWC_SOF_INTR_MASK) if (gintsts.d32 != DWC_SOF_INTR_MASK) +#endif #endif + DWC_DEBUGPL(DBG_HCD, "\n"); DWC_DEBUGPL(DBG_HCD, "\n"); +#endif /* */ #endif /* */ + } } + return retval; return retval; +} } + + +#ifdef DWC_TRACK_MISSED_SOFS #ifdef DWC_TRACK_MISSED_SOFS +#warning Compiling code to track missed SOFs #warning Compiling code to track missed SOFs +#define FRAME_NUM_ARRAY_SIZE 1000 #define FRAME_NUM_ARRAY_SIZE 1000 +/** /** + * This function is for debug only. * This function is for debug only. + */ */ +static inline void track_missed_sofs(uint16_t _curr_frame_num static inline void track_missed_sofs(uint16_t _curr_frame_num +{ { + static uint16_t frame_num_array[FRAME_NUM_ARRAY_SIZE] static uint16_t frame_num_array[FRAME_NUM_ARRAY_SIZE] + static uint16_t last_frame_num_array[FRAME_NUM_ARRAY_ static uint16_t last_frame_num_array[FRAME_NUM_ARRAY_ + static int frame_num_idx = 0; static int frame_num_idx = 0; + static uint16_t last_frame_num = DWC_HFNUM_MAX_FRNUM; static uint16_t last_frame_num = DWC_HFNUM_MAX_FRNUM; + static int dumped_frame_num_array = 0; static int dumped_frame_num_array = 0; + if (frame_num_idx < FRAME_NUM_ARRAY_SIZE) { if (frame_num_idx < FRAME_NUM_ARRAY_SIZE) { + if ((((last_frame_num + 1) & DWC_HFNUM_MAX_FR if ((((last_frame_num + 1) & DWC_HFNUM_MAX_FR + _curr_frame_number)) { _curr_frame_number)) { + frame_num_array[frame_num_idx] = _cur frame_num_array[frame_num_idx] = _cur + last_frame_num_array[frame_num_idx++] last_frame_num_array[frame_num_idx++] + } } + } else if (!dumped_frame_num_array) { } else if (!dumped_frame_num_array) { + int i; int i; + printk(KERN_EMERG USB_DWC "Frame Last Fra printk(KERN_EMERG USB_DWC "Frame Last Fra + printk(KERN_EMERG USB_DWC "----- -------- printk(KERN_EMERG USB_DWC "----- -------- + for (i = 0; i < FRAME_NUM_ARRAY_SIZE; i++) { for (i = 0; i < FRAME_NUM_ARRAY_SIZE; i++) { + printk(KERN_EMERG USB_DWC "0x%04x printk(KERN_EMERG USB_DWC "0x%04x + frame_num_array[i], last_fram frame_num_array[i], last_fram + } } + dumped_frame_num_array = 1; dumped_frame_num_array = 1; + } } + last_frame_num = _curr_frame_number; last_frame_num = _curr_frame_number; +} } +#endif /* */ #endif /* */ + +/** /** + * Handles the start-of-frame interrupt in host mode. Non-per * Handles the start-of-frame interrupt in host mode. Non-per + * transactions may be queued to the DWC_otg controller for t * transactions may be queued to the DWC_otg controller for t + * (micro)frame. Periodic transactions may be queued to the c * (micro)frame. Periodic transactions may be queued to the c + * next (micro)frame. * next (micro)frame. + */ */ +int32_t dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd_t * _hcd) int32_t dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd_t * _hcd) +{ { + hfnum_data_t hfnum; hfnum_data_t hfnum; + struct list_head *qh_entry; struct list_head *qh_entry; + dwc_otg_qh_t * qh; dwc_otg_qh_t * qh; + dwc_otg_transaction_type_e tr_type; dwc_otg_transaction_type_e tr_type; + gintsts_data_t gintsts = {.d32 = 0}; gintsts_data_t gintsts = {.d32 = 0}; + hfnum.d32 = dwc_read_reg32(&_hcd->core_if->host_if->h hfnum.d32 = dwc_read_reg32(&_hcd->core_if->host_if->h + +#ifdef DEBUG_SOF #ifdef DEBUG_SOF + DWC_DEBUGPL(DBG_HCD, "--Start of Frame Interrupt--\n"); DWC_DEBUGPL(DBG_HCD, "--Start of Frame Interrupt--\n"); +#endif /* */ #endif /* */ + _hcd->frame_number = hfnum.b.frnum; _hcd->frame_number = hfnum.b.frnum; +#ifdef CONFIG_DWC_DEBUG #ifdef CONFIG_DWC_DEBUG + _hcd->frrem_accum += hfnum.b.frrem; _hcd->frrem_accum += hfnum.b.frrem; + _hcd->frrem_samples++; _hcd->frrem_samples++; +#endif /* */ #endif /* */ + +#ifdef DWC_TRACK_MISSED_SOFS #ifdef DWC_TRACK_MISSED_SOFS + track_missed_sofs(_hcd->frame_number); track_missed_sofs(_hcd->frame_number); +#endif /* */ #endif /* */ + + /* Determine whether any periodic QHs should be executed. /* Determine whether any periodic QHs should be executed. + qh_entry = _hcd->periodic_sched_inactive.next; qh_entry = _hcd->periodic_sched_inactive.next; + while (qh_entry != &_hcd->periodic_sched_inactive) { while (qh_entry != &_hcd->periodic_sched_inactive) { + qh = list_entry(qh_entry, dwc_otg_qh_t, qh_li qh = list_entry(qh_entry, dwc_otg_qh_t, qh_li + qh_entry = qh_entry->next; qh_entry = qh_entry->next; + if (dwc_frame_num_le(qh->sched_frame, _hcd->f if (dwc_frame_num_le(qh->sched_frame, _hcd->f + /* /* + * Move QH to the ready list to be execut * Move QH to the ready list to be execut + * (micro)frame. * (micro)frame. + */ */ + list_move(&qh->qh_list_entry,&_hcd->perio list_move(&qh->qh_list_entry,&_hcd->perio + } } + } } + tr_type = dwc_otg_hcd_select_transactions(_hcd); tr_type = dwc_otg_hcd_select_transactions(_hcd); + if (tr_type != DWC_OTG_TRANSACTION_NONE) { if (tr_type != DWC_OTG_TRANSACTION_NONE) { + dwc_otg_hcd_queue_transactions(_hcd, tr_type) dwc_otg_hcd_queue_transactions(_hcd, tr_type) + //schedule_work(&_hcd->hcd_queue_work); //schedule_work(&_hcd->hcd_queue_work); + } } + + /* Clear interrupt */ /* Clear interrupt */ + gintsts.b.sofintr = 1; gintsts.b.sofintr = 1; + dwc_write_reg32(&_hcd->core_if->core_global_regs->gin dwc_write_reg32(&_hcd->core_if->core_global_regs->gin + return 1; return 1; +} } + +/** Handles the Rx Status Queue Level Interrupt, which indica /** Handles the Rx Status Queue Level Interrupt, which indica + * least one packet in the Rx FIFO. The packets are moved fr * least one packet in the Rx FIFO. The packets are moved fr + * memory if the DWC_otg controller is operating in Slave mod * memory if the DWC_otg controller is operating in Slave mod +int32_t dwc_otg_hcd_handle_rx_status_q_level_intr(dwc_otg_hcd int32_t dwc_otg_hcd_handle_rx_status_q_level_intr(dwc_otg_hcd +{ { + host_grxsts_data_t grxsts; host_grxsts_data_t grxsts; + dwc_hc_t * hc = NULL; dwc_hc_t * hc = NULL; + DWC_DEBUGPL(DBG_HCD, "--RxStsQ Level Interrupt--\n"); DWC_DEBUGPL(DBG_HCD, "--RxStsQ Level Interrupt--\n"); + grxsts.d32 = dwc_read_reg32(&_dwc_otg_hcd->core_if->c grxsts.d32 = dwc_read_reg32(&_dwc_otg_hcd->core_if->c + hc = _dwc_otg_hcd->hc_ptr_array[grxsts.b.chnum]; hc = _dwc_otg_hcd->hc_ptr_array[grxsts.b.chnum]; + + /* Packet Status */ /* Packet Status */ + DWC_DEBUGPL(DBG_HCDV, " Ch num = %d\n", grxsts.b.chnum DWC_DEBUGPL(DBG_HCDV, " Ch num = %d\n", grxsts.b.chnum + DWC_DEBUGPL(DBG_HCDV, " Count = %d\n", grxsts.b.bc DWC_DEBUGPL(DBG_HCDV, " Count = %d\n", grxsts.b.bc + DWC_DEBUGPL(DBG_HCDV, " DPID = %d, hc.dpid = %d\n" DWC_DEBUGPL(DBG_HCDV, " DPID = %d, hc.dpid = %d\n" + hc->data_pid_start); hc->data_pid_start); + DWC_DEBUGPL(DBG_HCDV, " PStatus = %d\n", grxsts.b. DWC_DEBUGPL(DBG_HCDV, " PStatus = %d\n", grxsts.b. + switch (grxsts.b.pktsts) { switch (grxsts.b.pktsts) { + case DWC_GRXSTS_PKTSTS_IN: case DWC_GRXSTS_PKTSTS_IN: + /* Read the data into the host buffer. */ /* Read the data into the host buffer. */ + if (grxsts.b.bcnt > 0) { if (grxsts.b.bcnt > 0) { + dwc_otg_read_packet(_dwc_otg_hcd->cor dwc_otg_read_packet(_dwc_otg_hcd->cor + hc->xfer_buff, g hc->xfer_buff, g + + /* Update the HC fields for the next pack /* Update the HC fields for the next pack + hc->xfer_count += grxsts.b.bcnt; hc->xfer_count += grxsts.b.bcnt; + hc->xfer_buff += grxsts.b.bcnt; hc->xfer_buff += grxsts.b.bcnt; + } } + case DWC_GRXSTS_PKTSTS_IN_XFER_COMP: case DWC_GRXSTS_PKTSTS_IN_XFER_COMP: + case DWC_GRXSTS_PKTSTS_DATA_TOGGLE_ERR: case DWC_GRXSTS_PKTSTS_DATA_TOGGLE_ERR: + case DWC_GRXSTS_PKTSTS_CH_HALTED: case DWC_GRXSTS_PKTSTS_CH_HALTED: + /* Handled in interrupt, just ignore data /* Handled in interrupt, just ignore data + break; break; + default: default: + DWC_ERROR("RX_STS_Q Interrupt: Unknown status DWC_ERROR("RX_STS_Q Interrupt: Unknown status + grxsts.b.pktsts); grxsts.b.pktsts); + break; break; + } } + return 1; return 1; +} } + + +/** This interrupt occurs when the non-periodic Tx FIFO is ha /** This interrupt occurs when the non-periodic Tx FIFO is ha + * data packets may be written to the FIFO for OUT transfers. * data packets may be written to the FIFO for OUT transfers. + * may be written to the non-periodic request queue for IN tr * may be written to the non-periodic request queue for IN tr + * interrupt is enabled only in Slave mode. */ * interrupt is enabled only in Slave mode. */ +int32_t dwc_otg_hcd_handle_np_tx_fifo_empty_intr(dwc_otg_hcd_ int32_t dwc_otg_hcd_handle_np_tx_fifo_empty_intr(dwc_otg_hcd_ + _dwc_otg _dwc_otg +{ { + DWC_DEBUGPL(DBG_HCD, "--Non-Periodic TxFIFO Empty Int DWC_DEBUGPL(DBG_HCD, "--Non-Periodic TxFIFO Empty Int + dwc_otg_hcd_queue_transactions(_dwc_otg_hcd, dwc_otg_hcd_queue_transactions(_dwc_otg_hcd, + DWC_OTG_TRANSACTION_N DWC_OTG_TRANSACTION_N + //schedule_work(&_dwc_otg_hcd->hcd_queue_work); //schedule_work(&_dwc_otg_hcd->hcd_queue_work); + return 1; return 1; +} } + + +/** This interrupt occurs when the periodic Tx FIFO is half-e /** This interrupt occurs when the periodic Tx FIFO is half-e + * packets may be written to the FIFO for OUT transfers. More * packets may be written to the FIFO for OUT transfers. More + * written to the periodic request queue for IN transfers. Th * written to the periodic request queue for IN transfers. Th + * enabled only in Slave mode. */ * enabled only in Slave mode. */ +int32_t dwc_otg_hcd_handle_perio_tx_fifo_empty_intr(dwc_otg_h int32_t dwc_otg_hcd_handle_perio_tx_fifo_empty_intr(dwc_otg_h + _dwc_ _dwc_ +{ { + DWC_DEBUGPL(DBG_HCD, "--Periodic TxFIFO Empty Interru DWC_DEBUGPL(DBG_HCD, "--Periodic TxFIFO Empty Interru + dwc_otg_hcd_queue_transactions(_dwc_otg_hcd, dwc_otg_hcd_queue_transactions(_dwc_otg_hcd, + DWC_OTG_TRANSACTION_P DWC_OTG_TRANSACTION_P + //schedule_work(&_dwc_otg_hcd->hcd_queue_work); //schedule_work(&_dwc_otg_hcd->hcd_queue_work); + return 1; return 1; +} } + + +/** There are multiple conditions that can cause a port inter /** There are multiple conditions that can cause a port inter + * determines which interrupt conditions have occurred and ha * determines which interrupt conditions have occurred and ha + * appropriately. */ * appropriately. */ +int32_t dwc_otg_hcd_handle_port_intr(dwc_otg_hcd_t * _dwc_otg int32_t dwc_otg_hcd_handle_port_intr(dwc_otg_hcd_t * _dwc_otg +{ { + int retval = 0; int retval = 0; + hprt0_data_t hprt0; hprt0_data_t hprt0; + hprt0_data_t hprt0_modify; hprt0_data_t hprt0_modify; + hprt0.d32 = dwc_read_reg32(_dwc_otg_hcd->core_if->hos hprt0.d32 = dwc_read_reg32(_dwc_otg_hcd->core_if->hos + hprt0_modify.d32 = dwc_read_reg32(_dwc_otg_hcd->core_ hprt0_modify.d32 = dwc_read_reg32(_dwc_otg_hcd->core_ + + /* Clear appropriate bits in HPRT0 to clear the interrupt /* Clear appropriate bits in HPRT0 to clear the interrupt + * GINTSTS */ * GINTSTS */ + hprt0_modify.b.prtena = 0; hprt0_modify.b.prtena = 0; + hprt0_modify.b.prtconndet = 0; hprt0_modify.b.prtconndet = 0; + hprt0_modify.b.prtenchng = 0; hprt0_modify.b.prtenchng = 0; + hprt0_modify.b.prtovrcurrchng = 0; hprt0_modify.b.prtovrcurrchng = 0; + + /* Port Connect Detected /* Port Connect Detected + * Set flag and clear if detected */ * Set flag and clear if detected */ + if (hprt0.b.prtconndet) { if (hprt0.b.prtconndet) { + DWC_DEBUGPL(DBG_HCD, "--Port Interrupt HPRT0= DWC_DEBUGPL(DBG_HCD, "--Port Interrupt HPRT0= + "Port Connect Detected--\n", hpr "Port Connect Detected--\n", hpr + _dwc_otg_hcd->flags.b.port_connect_status_cha _dwc_otg_hcd->flags.b.port_connect_status_cha + _dwc_otg_hcd->flags.b.port_connect_status = 1 _dwc_otg_hcd->flags.b.port_connect_status = 1 + hprt0_modify.b.prtconndet = 1; hprt0_modify.b.prtconndet = 1; + + /* B-Device has connected, Delete the connection /* B-Device has connected, Delete the connection + del_timer(&_dwc_otg_hcd->conn_timer); del_timer(&_dwc_otg_hcd->conn_timer); + + /* The Hub driver asserts a reset when it sees po /* The Hub driver asserts a reset when it sees po + * status change flag * status change flag + */ */ + retval |= 1; retval |= 1; + } } + + /* Port Enable Changed /* Port Enable Changed + * Clear if detected - Set internal flag if disabled */ * Clear if detected - Set internal flag if disabled */ + if (hprt0.b.prtenchng) { if (hprt0.b.prtenchng) { + DWC_DEBUGPL(DBG_HCD, " --Port Interrupt HPRT DWC_DEBUGPL(DBG_HCD, " --Port Interrupt HPRT + "Port Enable Changed--\n", hprt0 "Port Enable Changed--\n", hprt0 + hprt0_modify.b.prtenchng = 1; hprt0_modify.b.prtenchng = 1; + if (hprt0.b.prtena == 1) { if (hprt0.b.prtena == 1) { + int do_reset = 0; int do_reset = 0; + dwc_otg_core_params_t * params = dwc_otg_core_params_t * params = + _dwc_otg_hcd->core_if->core_param _dwc_otg_hcd->core_if->core_param + dwc_otg_core_global_regs_t * global_r dwc_otg_core_global_regs_t * global_r + _dwc_otg_hcd->core_if->core_globa _dwc_otg_hcd->core_if->core_globa + dwc_otg_host_if_t * host_if = dwc_otg_host_if_t * host_if = + _dwc_otg_hcd->core_if->host_if; _dwc_otg_hcd->core_if->host_if; + + /* Check if we need to adjust the PHY clo /* Check if we need to adjust the PHY clo + * low power and adjust it */ * low power and adjust it */ + if (params->host_support_fs_ls_low_power) if (params->host_support_fs_ls_low_power) + gusbcfg_data_t usbcfg; gusbcfg_data_t usbcfg; + usbcfg.d32 = dwc_read_reg32(& usbcfg.d32 = dwc_read_reg32(& + if ((hprt0.b.prtspd == DWC_HP if ((hprt0.b.prtspd == DWC_HP + (hprt0.b.prtspd == DW (hprt0.b.prtspd == DW + /* /* + * Low power * Low power + */ */ + hcfg_data_t hcfg; hcfg_data_t hcfg; + if (usbcfg.b.phylpwrc if (usbcfg.b.phylpwrc + /* Set PHY low po /* Set PHY low po + usbcfg.b.phylpwrc usbcfg.b.phylpwrc + dwc_write_reg dwc_write_reg + do_reset = 1; do_reset = 1; + } } + hcfg.d32 = dwc_read_r hcfg.d32 = dwc_read_r + if ((hprt0.b.prtspd = if ((hprt0.b.prtspd = + (params->host (params->host + DWC_HOST_LS_L DWC_HOST_LS_L + /* 6 MHZ */ /* 6 MHZ */ + DWC_DEBUGPL(DBG_C DWC_DEBUGPL(DBG_C + if (hcfg.b.fs if (hcfg.b.fs + hcfg. hcfg. + dwc_w dwc_w + do_re do_re + } } + } else { } else { + /* 48 MHZ */ /* 48 MHZ */ + DWC_DEBUGPL(DBG_C DWC_DEBUGPL(DBG_C + if (hcfg.b.fs if (hcfg.b.fs + hcfg. hcfg. + dwc_w dwc_w + do_re do_re + } } + } } + } else { } else { + /* /* + * Not low power * Not low power + */ */ + if (usbcfg.b.phylpwrclkse if (usbcfg.b.phylpwrclkse + usbcfg.b.phyl usbcfg.b.phyl + dwc_write_reg dwc_write_reg + do_reset = 1; do_reset = 1; + } } + } } + if (do_reset) { if (do_reset) { + tasklet_schedule(_dwc tasklet_schedule(_dwc + } } + } } + if (!do_reset) { if (!do_reset) { + /* Port has been enabled set the /* Port has been enabled set the + _dwc_otg_hcd->flags.b.port_reset_ _dwc_otg_hcd->flags.b.port_reset_ + } } + } else { } else { + _dwc_otg_hcd->flags.b.port_enable_cha _dwc_otg_hcd->flags.b.port_enable_cha + } } + retval |= 1; retval |= 1; + } } + + /** Overcurrent Change Interrupt */ /** Overcurrent Change Interrupt */ + if (hprt0.b.prtovrcurrchng) { if (hprt0.b.prtovrcurrchng) { + DWC_DEBUGPL(DBG_HCD, " --Port Interrupt HPRT DWC_DEBUGPL(DBG_HCD, " --Port Interrupt HPRT + "Port Overcurrent Changed--\n", "Port Overcurrent Changed--\n", + _dwc_otg_hcd->flags.b.port_over_current_chang _dwc_otg_hcd->flags.b.port_over_current_chang + hprt0_modify.b.prtovrcurrchng = 1; hprt0_modify.b.prtovrcurrchng = 1; + retval |= 1; retval |= 1; + } } + + /* Clear Port Interrupts */ /* Clear Port Interrupts */ + dwc_write_reg32(_dwc_otg_hcd->core_if->host_if->hprt0,hpr dwc_write_reg32(_dwc_otg_hcd->core_if->host_if->hprt0,hpr + return retval; return retval; +} } + +/** This interrupt indicates that one or more host channels h /** This interrupt indicates that one or more host channels h + * interrupt. There are multiple conditions that can cause ea * interrupt. There are multiple conditions that can cause ea + * interrupt. This function determines which conditions have * interrupt. This function determines which conditions have + * host channel interrupt and handles them appropriately. */ * host channel interrupt and handles them appropriately. */ +int32_t dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd_t * _dwc_otg_h int32_t dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd_t * _dwc_otg_h +{ { + int i; int i; + int retval = 0; int retval = 0; + haint_data_t haint; haint_data_t haint; + + /* Clear appropriate bits in HCINTn to clear the interrup /* Clear appropriate bits in HCINTn to clear the interrup + * GINTSTS */ * GINTSTS */ + haint.d32 = dwc_otg_read_host_all_channels_intr(_dwc_otg_ haint.d32 = dwc_otg_read_host_all_channels_intr(_dwc_otg_ + for (i = 0; i < _dwc_otg_hcd->core_if->core_params->h for (i = 0; i < _dwc_otg_hcd->core_if->core_params->h + if (haint.b2.chint & (1 << i)) { if (haint.b2.chint & (1 << i)) { + retval |= dwc_otg_hcd_handle_hc_n_int retval |= dwc_otg_hcd_handle_hc_n_int + } } + } } + return retval; return retval; +} } + +/* Macro used to clear one channel interrupt */ /* Macro used to clear one channel interrupt */ +#define clear_hc_int(_hc_regs_,_intr_) \ #define clear_hc_int(_hc_regs_,_intr_) \ + do { \ do { \ + hcint_data_t hcint_clear = { .d32 = 0}; \ hcint_data_t hcint_clear = { .d32 = 0}; \ + hcint_clear.b._intr_ = 1; \ hcint_clear.b._intr_ = 1; \ + dwc_write_reg32(&((_hc_regs_)->hcint), hcint_ dwc_write_reg32(&((_hc_regs_)->hcint), hcint_ + } while (0) } while (0) + +/* /* + * Macro used to disable one channel interrupt. Channel inter * Macro used to disable one channel interrupt. Channel inter + * disabled when the channel is halted or released by the int * disabled when the channel is halted or released by the int + * There is no need to handle further interrupts of that type * There is no need to handle further interrupts of that type + * channel is re-assigned. In fact, subsequent handling may c * channel is re-assigned. In fact, subsequent handling may c + * because the channel structures are cleaned up when the cha * because the channel structures are cleaned up when the cha + */ */ +#define disable_hc_int(_hc_regs_,_intr_) \ #define disable_hc_int(_hc_regs_,_intr_) \ + do { \ do { \ + hcintmsk_data_t hcintmsk = {.d32 = 0}; \ hcintmsk_data_t hcintmsk = {.d32 = 0}; \ + hcintmsk.b._intr_ = 1; \ hcintmsk.b._intr_ = 1; \ + dwc_modify_reg32(&((_hc_regs_)->hcintmsk), hc dwc_modify_reg32(&((_hc_regs_)->hcintmsk), hc + } while (0) } while (0) + +/** /** + * Gets the actual length of a transfer after the transfer ha * Gets the actual length of a transfer after the transfer ha + * holds the reason for the halt. * holds the reason for the halt. + * * + * For IN transfers where _halt_status is DWC_OTG_HC_XFER_COM * For IN transfers where _halt_status is DWC_OTG_HC_XFER_COM + * *_short_read is set to 1 upon return if less than the requ * *_short_read is set to 1 upon return if less than the requ + * number of bytes were transferred. Otherwise, *_short_read * number of bytes were transferred. Otherwise, *_short_read + * return. _short_read may also be NULL on entry, in which ca * return. _short_read may also be NULL on entry, in which ca + * unchanged. * unchanged. + */ */ +static uint32_t get_actual_xfer_length(dwc_hc_t * _hc, static uint32_t get_actual_xfer_length(dwc_hc_t * _hc, + dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, + dwc_otg_halt_status_e _halt_status, int *_short_read) dwc_otg_halt_status_e _halt_status, int *_short_read) +{ { + hctsiz_data_t hctsiz; hctsiz_data_t hctsiz; + uint32_t length; uint32_t length; + if (_short_read != NULL) { if (_short_read != NULL) { + *_short_read = 0; *_short_read = 0; + } } + hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz); hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz); + if (_halt_status == DWC_OTG_HC_XFER_COMPLETE) { if (_halt_status == DWC_OTG_HC_XFER_COMPLETE) { + if (_hc->ep_is_in) { if (_hc->ep_is_in) { + length = _hc->xfer_len - hctsiz.b.xfe length = _hc->xfer_len - hctsiz.b.xfe + if (_short_read != NULL) { if (_short_read != NULL) { + *_short_read = (hctsiz.b.xfer *_short_read = (hctsiz.b.xfer + } } + } else if (_hc->qh->do_split) { } else if (_hc->qh->do_split) { + length = _qtd->ssplit_out_xfer_count; length = _qtd->ssplit_out_xfer_count; + } else { } else { + length = _hc->xfer_len; length = _hc->xfer_len; + } } + } else { } else { + /* /* + * Must use the hctsiz.pktcnt field to determine * Must use the hctsiz.pktcnt field to determine + * has been transferred. This field reflects the * has been transferred. This field reflects the + * packets that have been transferred via the USB * packets that have been transferred via the USB + * always an integral number of packets if the tr * always an integral number of packets if the tr + * halted before its normal completion. (Can't us * halted before its normal completion. (Can't us + * hctsiz.xfersize field because that reflects th * hctsiz.xfersize field because that reflects th + * bytes transferred via the AHB, not the USB). * bytes transferred via the AHB, not the USB). + */ */ + length = (_hc->start_pkt_count - hctsiz.b.pktcnt) length = (_hc->start_pkt_count - hctsiz.b.pktcnt) + } } + return length; return length; +} } + +/** /** + * Updates the state of the URB after a Transfer Complete int * Updates the state of the URB after a Transfer Complete int + * host channel. Updates the actual_length field of the URB b * host channel. Updates the actual_length field of the URB b + * number of bytes transferred via the host channel. Sets the * number of bytes transferred via the host channel. Sets the + * if the data transfer is finished. * if the data transfer is finished. + * * + * @return 1 if the data transfer specified by the URB is com * @return 1 if the data transfer specified by the URB is com + * 0 otherwise. * 0 otherwise. + */ */ +static int update_urb_state_xfer_comp(dwc_hc_t * _hc, static int update_urb_state_xfer_comp(dwc_hc_t * _hc, + dwc_otg_hc_regs_t * _hc dwc_otg_hc_regs_t * _hc + dwc_otg_qtd_t * _qtd, i dwc_otg_qtd_t * _qtd, i +{ { + int xfer_done = 0; int xfer_done = 0; + int short_read = 0; int short_read = 0; + _urb->actual_length += get_actual_xfer_length(_hc, _h _urb->actual_length += get_actual_xfer_length(_hc, _h + DWC_OTG_HC_XFER_COMPLETE, DWC_OTG_HC_XFER_COMPLETE, + if (short_read || (_urb->actual_length == _urb->trans if (short_read || (_urb->actual_length == _urb->trans + xfer_done = 1; xfer_done = 1; + if (_urb->actual_length == _urb->transfer_buf | if (short_read && (_urb->transfer_flags & URB + *status = 0; < + } else if (short_read && (_urb->transfer_flag < + *status = -EREMOTEIO; *status = -EREMOTEIO; + } else { } else { + *status = 0; *status = 0; + } } + } } + +#ifdef CONFIG_DWC_DEBUG #ifdef CONFIG_DWC_DEBUG + { { + hctsiz_data_t hctsiz; hctsiz_data_t hctsiz; + hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz + DWC_DEBUGPL(DBG_HCDV, "DWC_otg: %s: %s, chann DWC_DEBUGPL(DBG_HCDV, "DWC_otg: %s: %s, chann + __func__, (_hc->ep_is_in ? "IN" __func__, (_hc->ep_is_in ? "IN" + DWC_DEBUGPL(DBG_HCDV, " hc->xfer_len %d\n", DWC_DEBUGPL(DBG_HCDV, " hc->xfer_len %d\n", + DWC_DEBUGPL(DBG_HCDV, " hctsiz.xfersize %d\n DWC_DEBUGPL(DBG_HCDV, " hctsiz.xfersize %d\n + DWC_DEBUGPL(DBG_HCDV, " urb->transfer_buffer DWC_DEBUGPL(DBG_HCDV, " urb->transfer_buffer + _urb->transfer_buffer_length); _urb->transfer_buffer_length); + DWC_DEBUGPL(DBG_HCDV, " urb->actual_length % DWC_DEBUGPL(DBG_HCDV, " urb->actual_length % + _urb->actual_length); _urb->actual_length); + DWC_DEBUGPL(DBG_HCDV, " short_read %d, xfer_ DWC_DEBUGPL(DBG_HCDV, " short_read %d, xfer_ + short_read, xfer_done); short_read, xfer_done); + } } +#endif /* */ #endif /* */ + return xfer_done; return xfer_done; +} } + +/* /* + * Save the starting data toggle for the next transfer. The d * Save the starting data toggle for the next transfer. The d + * saved in the QH for non-control transfers and it's saved i * saved in the QH for non-control transfers and it's saved i + * control transfers. * control transfers. + */ */ +static void save_data_toggle(dwc_hc_t * _hc, static void save_data_toggle(dwc_hc_t * _hc, + dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd) dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd) +{ { + hctsiz_data_t hctsiz; hctsiz_data_t hctsiz; + hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz); hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz); + if (_hc->ep_type != DWC_OTG_EP_TYPE_CONTROL) { if (_hc->ep_type != DWC_OTG_EP_TYPE_CONTROL) { + dwc_otg_qh_t * qh = _hc->qh; dwc_otg_qh_t * qh = _hc->qh; + if (hctsiz.b.pid == DWC_HCTSIZ_DATA0) { if (hctsiz.b.pid == DWC_HCTSIZ_DATA0) { + qh->data_toggle = DWC_OTG_HC_PID_DATA qh->data_toggle = DWC_OTG_HC_PID_DATA + } else { } else { + qh->data_toggle = DWC_OTG_HC_PID_DATA qh->data_toggle = DWC_OTG_HC_PID_DATA + } } + } else { } else { + if (hctsiz.b.pid == DWC_HCTSIZ_DATA0) { if (hctsiz.b.pid == DWC_HCTSIZ_DATA0) { + _qtd->data_toggle = DWC_OTG_HC_PID_DA _qtd->data_toggle = DWC_OTG_HC_PID_DA + } else { } else { + _qtd->data_toggle = DWC_OTG_HC_PID_DA _qtd->data_toggle = DWC_OTG_HC_PID_DA + } } + } } +} } + +/** /** + * Frees the first QTD in the QH's list if free_qtd is 1. For * Frees the first QTD in the QH's list if free_qtd is 1. For + * QHs, removes the QH from the active non-periodic schedule. * QHs, removes the QH from the active non-periodic schedule. + * still linked to the QH, the QH is added to the end of the * still linked to the QH, the QH is added to the end of the + * non-periodic schedule. For periodic QHs, removes the QH fr * non-periodic schedule. For periodic QHs, removes the QH fr + * schedule if no more QTDs are linked to the QH. * schedule if no more QTDs are linked to the QH. + */ */ +static void deactivate_qh(dwc_otg_hcd_t * _hcd, static void deactivate_qh(dwc_otg_hcd_t * _hcd, + dwc_otg_qh_t * _qh, int free_qtd) dwc_otg_qh_t * _qh, int free_qtd) +{ { + int continue_split = 0; int continue_split = 0; + dwc_otg_qtd_t * qtd; dwc_otg_qtd_t * qtd; + DWC_DEBUGPL(DBG_HCDV, " %s(%p,%p,%d)\n", __func__, _ DWC_DEBUGPL(DBG_HCDV, " %s(%p,%p,%d)\n", __func__, _ + free_qtd); free_qtd); + qtd = list_entry(_qh->qtd_list.next, dwc_otg_qtd_t, q qtd = list_entry(_qh->qtd_list.next, dwc_otg_qtd_t, q + if (qtd->complete_split) { if (qtd->complete_split) { + continue_split = 1; continue_split = 1; + } else if ((qtd->isoc_split_pos == DWC_HCSPLIT_XACTPO } else if ((qtd->isoc_split_pos == DWC_HCSPLIT_XACTPO + (qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_E (qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_E + continue_split = 1; continue_split = 1; + } } + + if (free_qtd) { if (free_qtd) { + /* /* + * Note that this was previously a call to * Note that this was previously a call to + * dwc_otg_hcd_qtd_remove_and_free(qtd), whic * dwc_otg_hcd_qtd_remove_and_free(qtd), whic + * However, that call frees the qtd memory, a * However, that call frees the qtd memory, a + * interrupt logic to access it many more tim * interrupt logic to access it many more tim + * to it. With slub debugging on, it is clea * to it. With slub debugging on, it is clea + * to memory we had freed. * to memory we had freed. + * Call this instead, and now I have moved th * Call this instead, and now I have moved th + * the end of processing this interrupt. * the end of processing this interrupt. + */ */ + dwc_otg_hcd_qtd_remove(qtd); dwc_otg_hcd_qtd_remove(qtd); + + continue_split = 0; continue_split = 0; + } } + _qh->channel = NULL; _qh->channel = NULL; + _qh->qtd_in_process = NULL; _qh->qtd_in_process = NULL; + dwc_otg_hcd_qh_deactivate(_hcd, _qh, continue_split); dwc_otg_hcd_qh_deactivate(_hcd, _qh, continue_split); +} } + +/** /** + * Updates the state of an Isochronous URB when the transfer * Updates the state of an Isochronous URB when the transfer + * any reason. The fields of the current entry in the frame d * any reason. The fields of the current entry in the frame d + * are set based on the transfer state and the input _halt_st * are set based on the transfer state and the input _halt_st + * the Isochronous URB if all the URB frames have been comple * the Isochronous URB if all the URB frames have been comple + * * + * @return DWC_OTG_HC_XFER_COMPLETE if there are more frames * @return DWC_OTG_HC_XFER_COMPLETE if there are more frames + * transferred in the URB. Otherwise return DWC_OTG_HC_XFER_U * transferred in the URB. Otherwise return DWC_OTG_HC_XFER_U + */ */ +static dwc_otg_halt_status_e update_isoc_urb_state(dwc_otg_hc static dwc_otg_halt_status_e update_isoc_urb_state(dwc_otg_hc + dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_o dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_o + dwc_otg_halt_status_e _halt_status) dwc_otg_halt_status_e _halt_status) +{ { + struct urb *urb = _qtd->urb; struct urb *urb = _qtd->urb; + dwc_otg_halt_status_e ret_val = _halt_status; dwc_otg_halt_status_e ret_val = _halt_status; + struct usb_iso_packet_descriptor *frame_desc; struct usb_iso_packet_descriptor *frame_desc; + frame_desc = &urb->iso_frame_desc[_qtd->isoc_frame_in frame_desc = &urb->iso_frame_desc[_qtd->isoc_frame_in + switch (_halt_status) { switch (_halt_status) { + case DWC_OTG_HC_XFER_COMPLETE: case DWC_OTG_HC_XFER_COMPLETE: + frame_desc->status = 0; frame_desc->status = 0; + frame_desc->actual_length = frame_desc->actual_length = + get_actual_xfer_length(_hc, _hc_regs, get_actual_xfer_length(_hc, _hc_regs, + break; break; + case DWC_OTG_HC_XFER_FRAME_OVERRUN: case DWC_OTG_HC_XFER_FRAME_OVERRUN: + urb->error_count++; urb->error_count++; + if (_hc->ep_is_in) { if (_hc->ep_is_in) { + frame_desc->status = -ENOSR; frame_desc->status = -ENOSR; + } else { } else { + frame_desc->status = -ECOMM; frame_desc->status = -ECOMM; + } } + frame_desc->actual_length = 0; frame_desc->actual_length = 0; + break; break; + case DWC_OTG_HC_XFER_BABBLE_ERR: case DWC_OTG_HC_XFER_BABBLE_ERR: + urb->error_count++; urb->error_count++; + frame_desc->status = -EOVERFLOW; frame_desc->status = -EOVERFLOW; + + /* Don't need to update actual_length in this cas /* Don't need to update actual_length in this cas + break; break; + case DWC_OTG_HC_XFER_XACT_ERR: case DWC_OTG_HC_XFER_XACT_ERR: + urb->error_count++; urb->error_count++; + frame_desc->status = -EPROTO; frame_desc->status = -EPROTO; + frame_desc->actual_length = frame_desc->actual_length = + get_actual_xfer_length(_hc, _hc_regs, _qt get_actual_xfer_length(_hc, _hc_regs, _qt + default: default: + DWC_ERROR("%s: Unhandled _halt_status (%d)\n" DWC_ERROR("%s: Unhandled _halt_status (%d)\n" + BUG(); BUG(); + break; break; + } } + if (++_qtd->isoc_frame_index == urb->number_of_packet if (++_qtd->isoc_frame_index == urb->number_of_packet + /* /* + * urb->status is not used for isoc transfers. * urb->status is not used for isoc transfers. + * The individual frame_desc statuses are used in * The individual frame_desc statuses are used in + */ */ + dwc_otg_hcd_complete_urb(_hcd, urb, 0); dwc_otg_hcd_complete_urb(_hcd, urb, 0); + ret_val = DWC_OTG_HC_XFER_URB_COMPLETE; ret_val = DWC_OTG_HC_XFER_URB_COMPLETE; + } else { } else { + ret_val = DWC_OTG_HC_XFER_COMPLETE; ret_val = DWC_OTG_HC_XFER_COMPLETE; + } } + return ret_val; return ret_val; +} } + +/** /** + * Releases a host channel for use by other transfers. Attemp * Releases a host channel for use by other transfers. Attemp + * queue more transactions since at least one host channel is * queue more transactions since at least one host channel is + * * + * @param _hcd The HCD state structure. * @param _hcd The HCD state structure. + * @param _hc The host channel to release. * @param _hc The host channel to release. + * @param _qtd The QTD associated with the host channel. This * @param _qtd The QTD associated with the host channel. This + * if the transfer is complete or an error has occurred. * if the transfer is complete or an error has occurred. + * @param _halt_status Reason the channel is being released. * @param _halt_status Reason the channel is being released. + * determines the actions taken by this function. * determines the actions taken by this function. + */ */ + +static void release_channel(dwc_otg_hcd_t * _hcd, static void release_channel(dwc_otg_hcd_t * _hcd, + dwc_hc_t * _hc, dwc_otg_qtd_t * _qtd, dwc_otg_halt_status dwc_hc_t * _hc, dwc_otg_qtd_t * _qtd, dwc_otg_halt_status + dwc_otg_transaction_type_e tr_type; dwc_otg_transaction_type_e tr_type; + int free_qtd; int free_qtd; + dwc_otg_qh_t * _qh; dwc_otg_qh_t * _qh; + int deact = 1; int deact = 1; + int retry_delay = 1; int retry_delay = 1; + unsigned long flags; < + + DWC_DEBUGPL(DBG_HCDV, " %s: channel %d, halt_status DWC_DEBUGPL(DBG_HCDV, " %s: channel %d, halt_status + _hc->hc_num, _halt_status); _hc->hc_num, _halt_status); + switch (_halt_status) { switch (_halt_status) { + case DWC_OTG_HC_XFER_NYET: case DWC_OTG_HC_XFER_NYET: + case DWC_OTG_HC_XFER_NAK: case DWC_OTG_HC_XFER_NAK: + if (_halt_status == DWC_OTG_HC_XFER_NYET) { if (_halt_status == DWC_OTG_HC_XFER_NYET) { + retry_delay = nyet_deferral_delay; retry_delay = nyet_deferral_delay; + } else { } else { + retry_delay = nak_deferral_delay; retry_delay = nak_deferral_delay; + } } + free_qtd = 0; free_qtd = 0; + if (deferral_on && _hc->do_split) { if (deferral_on && _hc->do_split) { + _qh = _hc->qh; _qh = _hc->qh; + if (_qh) { if (_qh) { + deact = dwc_otg_hcd_qh_deferr deact = dwc_otg_hcd_qh_deferr + } } + } } + break; break; + + case DWC_OTG_HC_XFER_URB_COMPLETE: case DWC_OTG_HC_XFER_URB_COMPLETE: + free_qtd = 1; free_qtd = 1; + break; break; + case DWC_OTG_HC_XFER_AHB_ERR: case DWC_OTG_HC_XFER_AHB_ERR: + case DWC_OTG_HC_XFER_STALL: case DWC_OTG_HC_XFER_STALL: + case DWC_OTG_HC_XFER_BABBLE_ERR: case DWC_OTG_HC_XFER_BABBLE_ERR: + free_qtd = 1; free_qtd = 1; + break; break; + case DWC_OTG_HC_XFER_XACT_ERR: case DWC_OTG_HC_XFER_XACT_ERR: + if (_qtd->error_count >= 3) { if (_qtd->error_count >= 3) { + DWC_DEBUGPL(DBG_HCDV, " Complete URB DWC_DEBUGPL(DBG_HCDV, " Complete URB + free_qtd = 1; free_qtd = 1; + dwc_otg_hcd_complete_urb(_hcd, _qtd-> dwc_otg_hcd_complete_urb(_hcd, _qtd-> + } else { } else { + free_qtd = 0; free_qtd = 0; + } } + break; break; + case DWC_OTG_HC_XFER_URB_DEQUEUE: case DWC_OTG_HC_XFER_URB_DEQUEUE: + /* /* + * The QTD has already been removed and the QH ha * The QTD has already been removed and the QH ha + * deactivated. Don't want to do anything except * deactivated. Don't want to do anything except + * host channel and try to queue more transfers. * host channel and try to queue more transfers. + */ */ + goto cleanup; goto cleanup; + case DWC_OTG_HC_XFER_NO_HALT_STATUS: case DWC_OTG_HC_XFER_NO_HALT_STATUS: +#ifdef CONFIG_DWC_DEBUG < + DWC_ERROR("%s: No halt_status, channel %d\n", DWC_ERROR("%s: No halt_status, channel %d\n", + _hc->hc_num); _hc->hc_num); +#endif < + free_qtd = 0; free_qtd = 0; + break; break; + default: default: + free_qtd = 0; free_qtd = 0; + break; break; + } } + if (free_qtd) { | *must_free = free_qtd; + /* Only change must_free to true (do not set < + * pre-initialized to zero). < + */ < + *must_free = 1; < + } < + if (deact) { if (deact) { + deactivate_qh(_hcd, _hc->qh, free_qtd); deactivate_qh(_hcd, _hc->qh, free_qtd); + } } +cleanup: cleanup: + /* /* + * Release the host channel for use by other transfers. T * Release the host channel for use by other transfers. T + * function clears the channel interrupt enables and cond * function clears the channel interrupt enables and cond + * there's no need to clear the Channel Halted interrupt * there's no need to clear the Channel Halted interrupt + */ */ + dwc_otg_hc_cleanup(_hcd->core_if, _hc); dwc_otg_hc_cleanup(_hcd->core_if, _hc); + list_add_tail(&_hc->hc_list_entry, &_hcd->free_hc_lis list_add_tail(&_hc->hc_list_entry, &_hcd->free_hc_lis + local_irq_save(flags); | switch (_hc->ep_type) { + _hcd->available_host_channels++; | case DWC_OTG_EP_TYPE_CONTROL: + local_irq_restore(flags); | case DWC_OTG_EP_TYPE_BULK: + | _hcd->non_periodic_channels--; + > break; + > default: + > /* + > * Don't release reservations for periodic channe + > * That's done when a periodic transfer is desche + > * when the QH is removed from the periodic sched + > */ + > break; + > } + /* Try to queue more transfers now that there's a fre /* Try to queue more transfers now that there's a fre + /* unless erratum_usb09_patched is set */ /* unless erratum_usb09_patched is set */ + if (!erratum_usb09_patched) { if (!erratum_usb09_patched) { + tr_type = dwc_otg_hcd_select_transactions(_hc tr_type = dwc_otg_hcd_select_transactions(_hc + if (tr_type != DWC_OTG_TRANSACTION_NONE) { if (tr_type != DWC_OTG_TRANSACTION_NONE) { + dwc_otg_hcd_queue_transactions(_hcd, dwc_otg_hcd_queue_transactions(_hcd, + } } + } } +} } + +/** /** + * Halts a host channel. If the channel cannot be halted imme * Halts a host channel. If the channel cannot be halted imme + * the request queue is full, this function ensures that the * the request queue is full, this function ensures that the + * interrupt for the appropriate queue is enabled so that the * interrupt for the appropriate queue is enabled so that the + * be queued when there is space in the request queue. * be queued when there is space in the request queue. + * * + * This function may also be called in DMA mode. In that case * This function may also be called in DMA mode. In that case + * simply released since the core always halts the channel au * simply released since the core always halts the channel au + * DMA mode. * DMA mode. + */ */ +static void halt_channel(dwc_otg_hcd_t * _hcd, static void halt_channel(dwc_otg_hcd_t * _hcd, + dwc_hc_t * _hc, dwc_otg_qtd_t * _qtd, dwc_otg_halt_st dwc_hc_t * _hc, dwc_otg_qtd_t * _qtd, dwc_otg_halt_st +{ { + if (_hcd->core_if->dma_enable) { if (_hcd->core_if->dma_enable) { + release_channel(_hcd, _hc, _qtd, _halt_status release_channel(_hcd, _hc, _qtd, _halt_status + return; return; + } } + + /* Slave mode processing... */ /* Slave mode processing... */ + dwc_otg_hc_halt(_hcd->core_if, _hc, _halt_status); dwc_otg_hc_halt(_hcd->core_if, _hc, _halt_status); + if (_hc->halt_on_queue) { if (_hc->halt_on_queue) { + gintmsk_data_t gintmsk = {.d32 = 0}; gintmsk_data_t gintmsk = {.d32 = 0}; + dwc_otg_core_global_regs_t * global_regs; dwc_otg_core_global_regs_t * global_regs; + global_regs = _hcd->core_if->core_global_regs global_regs = _hcd->core_if->core_global_regs + if (_hc->ep_type == DWC_OTG_EP_TYPE_CONTROL | if (_hc->ep_type == DWC_OTG_EP_TYPE_CONTROL | + _hc->ep_type == DWC_OTG_EP_TYPE_BULK) _hc->ep_type == DWC_OTG_EP_TYPE_BULK) + /* /* + * Make sure the Non-periodic Tx FIFO emp * Make sure the Non-periodic Tx FIFO emp + * is enabled so that the non-periodic sc * is enabled so that the non-periodic sc + * be processed. * be processed. + */ */ + gintmsk.b.nptxfempty = 1; gintmsk.b.nptxfempty = 1; + dwc_modify_reg32(&global_regs->gintms dwc_modify_reg32(&global_regs->gintms + } else { } else { + /* /* + * Move the QH from the periodic queued s * Move the QH from the periodic queued s + * the periodic assigned schedule. This a * the periodic assigned schedule. This a + * halt to be queued when the periodic sc * halt to be queued when the periodic sc + * processed. * processed. + */ */ + list_move(&_hc->qh->qh_list_entry, list_move(&_hc->qh->qh_list_entry, + &_hcd->periodic_sched_assigned) &_hcd->periodic_sched_assigned) + + /* /* + * Make sure the Periodic Tx FIFO Empty i * Make sure the Periodic Tx FIFO Empty i + * enabled so that the periodic schedule * enabled so that the periodic schedule + * processed. * processed. + */ */ + gintmsk.b.ptxfempty = 1; gintmsk.b.ptxfempty = 1; + dwc_modify_reg32(&global_regs->gintms dwc_modify_reg32(&global_regs->gintms + } } + } } +} } + +/** /** + * Performs common cleanup for non-periodic transfers after a * Performs common cleanup for non-periodic transfers after a + * Complete interrupt. This function should be called after a * Complete interrupt. This function should be called after a + * specific handling is finished to release the host channel. * specific handling is finished to release the host channel. + */ */ +static void complete_non_periodic_xfer(dwc_otg_hcd_t * _hcd, static void complete_non_periodic_xfer(dwc_otg_hcd_t * _hcd, + dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg + dwc_otg_halt_status_e _halt_status, int *must_free) dwc_otg_halt_status_e _halt_status, int *must_free) +{ { + hcint_data_t hcint; hcint_data_t hcint; + _qtd->error_count = 0; _qtd->error_count = 0; + hcint.d32 = dwc_read_reg32(&_hc_regs->hcint); hcint.d32 = dwc_read_reg32(&_hc_regs->hcint); + if (hcint.b.nyet) { if (hcint.b.nyet) { + /* /* + * Got a NYET on the last transaction of the tran * Got a NYET on the last transaction of the tran + * means that the endpoint should be in the PING * means that the endpoint should be in the PING + * beginning of the next transfer. * beginning of the next transfer. + */ */ + _hc->qh->ping_state = 1; _hc->qh->ping_state = 1; + clear_hc_int(_hc_regs, nyet); clear_hc_int(_hc_regs, nyet); + } } + + /* /* + * Always halt and release the host channel to make it av * Always halt and release the host channel to make it av + * more transfers. There may still be more phases for a c * more transfers. There may still be more phases for a c + * transfer or more data packets for a bulk transfer at t * transfer or more data packets for a bulk transfer at t + * but the host channel is still halted. A channel will b * but the host channel is still halted. A channel will b + * to the transfer when the non-periodic schedule is proc * to the transfer when the non-periodic schedule is proc + * the channel is released. This allows transactions to b * the channel is released. This allows transactions to b + * properly via dwc_otg_hcd_queue_transactions, which als * properly via dwc_otg_hcd_queue_transactions, which als + * Tx FIFO Empty interrupt if necessary. * Tx FIFO Empty interrupt if necessary. + */ */ + if (_hc->ep_is_in) { if (_hc->ep_is_in) { + /* /* + * IN transfers in Slave mode require an explicit * IN transfers in Slave mode require an explicit + * halt the channel. (In DMA mode, this call simp * halt the channel. (In DMA mode, this call simp + * the channel.) * the channel.) + */ */ + halt_channel(_hcd, _hc, _qtd, _halt_status, must_ halt_channel(_hcd, _hc, _qtd, _halt_status, must_ + } else { } else { + /* /* + * The channel is automatically disabled by the c * The channel is automatically disabled by the c + * transfers in Slave mode. * transfers in Slave mode. + */ */ + release_channel(_hcd, _hc, _qtd, _halt_status, mu release_channel(_hcd, _hc, _qtd, _halt_status, mu + } } +} } + +/** /** + * Performs common cleanup for periodic transfers after a Tra * Performs common cleanup for periodic transfers after a Tra + * interrupt. This function should be called after any endpoi * interrupt. This function should be called after any endpoi + * handling is finished to release the host channel. * handling is finished to release the host channel. + */ */ +static void complete_periodic_xfer(dwc_otg_hcd_t * _hcd, static void complete_periodic_xfer(dwc_otg_hcd_t * _hcd, + dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg + dwc_otg_halt_status_e _halt_status, int *must_free) dwc_otg_halt_status_e _halt_status, int *must_free) +{ { + hctsiz_data_t hctsiz; hctsiz_data_t hctsiz; + _qtd->error_count = 0; _qtd->error_count = 0; + hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz); hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz); + if (!_hc->ep_is_in || hctsiz.b.pktcnt == 0) { if (!_hc->ep_is_in || hctsiz.b.pktcnt == 0) { + /* Core halts channel in these cases. */ /* Core halts channel in these cases. */ + release_channel(_hcd, _hc, _qtd, _halt_status, mu release_channel(_hcd, _hc, _qtd, _halt_status, mu + } else { } else { + /* Flush any outstanding requests from the Tx que /* Flush any outstanding requests from the Tx que + halt_channel(_hcd, _hc, _qtd, _halt_status, must_ halt_channel(_hcd, _hc, _qtd, _halt_status, must_ + } } +} } + +/** /** + * Handles a host channel Transfer Complete interrupt. This h * Handles a host channel Transfer Complete interrupt. This h + * called in either DMA mode or Slave mode. * called in either DMA mode or Slave mode. + */ */ +static int32_t handle_hc_xfercomp_intr(dwc_otg_hcd_t * _hcd, static int32_t handle_hc_xfercomp_intr(dwc_otg_hcd_t * _hcd, + dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg +{ { + int urb_xfer_done; int urb_xfer_done; + dwc_otg_halt_status_e halt_status = DWC_OTG_HC_XFER_C dwc_otg_halt_status_e halt_status = DWC_OTG_HC_XFER_C + struct urb *urb = _qtd->urb; struct urb *urb = _qtd->urb; + int pipe_type = usb_pipetype(urb->pipe); int pipe_type = usb_pipetype(urb->pipe); + int status = -EINPROGRESS; int status = -EINPROGRESS; + + DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " + "Transfer Complete--\n", _hc->hc_num); "Transfer Complete--\n", _hc->hc_num); + + /* /* + * Handle xfer complete on CSPLIT. * Handle xfer complete on CSPLIT. + */ */ + if (_hc->qh->do_split) { if (_hc->qh->do_split) { + _qtd->complete_split = 0; _qtd->complete_split = 0; + } } + + /* Update the QTD and URB states. */ /* Update the QTD and URB states. */ + switch (pipe_type) { switch (pipe_type) { + case PIPE_CONTROL: case PIPE_CONTROL: + switch (_qtd->control_phase) { switch (_qtd->control_phase) { + case DWC_OTG_CONTROL_SETUP: case DWC_OTG_CONTROL_SETUP: + if (urb->transfer_buffer_length > 0) if (urb->transfer_buffer_length > 0) + _qtd->control_phase = DWC_OTG _qtd->control_phase = DWC_OTG + } else { } else { + _qtd->control_phase = DWC_OTG _qtd->control_phase = DWC_OTG + } } + DWC_DEBUGPL(DBG_HCDV, DWC_DEBUGPL(DBG_HCDV, + " Control setup transac " Control setup transac + halt_status = DWC_OTG_HC_XFER_COMPLET halt_status = DWC_OTG_HC_XFER_COMPLET + break; break; + case DWC_OTG_CONTROL_DATA:{ case DWC_OTG_CONTROL_DATA:{ + urb_xfer_done = update_urb_state_xfer urb_xfer_done = update_urb_state_xfer + if (urb_xfer_done) { if (urb_xfer_done) { + _qtd->control_phase = _qtd->control_phase = + DWC_DEBUGPL(DBG_HCDV, DWC_DEBUGPL(DBG_HCDV, + } else { } else { + save_data_toggle(_hc, save_data_toggle(_hc, + } } + halt_status = DWC_OTG_HC_XFER halt_status = DWC_OTG_HC_XFER + break; break; + } } + case DWC_OTG_CONTROL_STATUS: case DWC_OTG_CONTROL_STATUS: + DWC_DEBUGPL(DBG_HCDV, " Control tran DWC_DEBUGPL(DBG_HCDV, " Control tran + if (status == -EINPROGRESS) { if (status == -EINPROGRESS) { + status = 0; status = 0; + } } + dwc_otg_hcd_complete_urb(_hcd, urb, s dwc_otg_hcd_complete_urb(_hcd, urb, s + halt_status = DWC_OTG_HC_XFER_URB_COM halt_status = DWC_OTG_HC_XFER_URB_COM + break; break; + } } + complete_non_periodic_xfer(_hcd, _hc, _hc_reg complete_non_periodic_xfer(_hcd, _hc, _hc_reg + halt_status, mus halt_status, mus + break; break; + case PIPE_BULK: case PIPE_BULK: + DWC_DEBUGPL(DBG_HCDV, " Bulk transfer comple DWC_DEBUGPL(DBG_HCDV, " Bulk transfer comple + urb_xfer_done = update_urb_state_xfer_comp(_h urb_xfer_done = update_urb_state_xfer_comp(_h + if (urb_xfer_done) { if (urb_xfer_done) { + dwc_otg_hcd_complete_urb(_hcd, urb, s dwc_otg_hcd_complete_urb(_hcd, urb, s + halt_status = DWC_OTG_HC_XFER_URB_COM halt_status = DWC_OTG_HC_XFER_URB_COM + } else { } else { + halt_status = DWC_OTG_HC_XFER_COMPLET halt_status = DWC_OTG_HC_XFER_COMPLET + } } + save_data_toggle(_hc, _hc_regs, _qtd); save_data_toggle(_hc, _hc_regs, _qtd); + complete_non_periodic_xfer(_hcd, _hc, _hc_reg complete_non_periodic_xfer(_hcd, _hc, _hc_reg + break; break; + case PIPE_INTERRUPT: case PIPE_INTERRUPT: + DWC_DEBUGPL(DBG_HCDV, " Interrupt transfer c DWC_DEBUGPL(DBG_HCDV, " Interrupt transfer c + update_urb_state_xfer_comp(_hc, _hc_regs, urb update_urb_state_xfer_comp(_hc, _hc_regs, urb + /* /* + * Interrupt URB is done on the first transfer co * Interrupt URB is done on the first transfer co + * interrupt. * interrupt. + */ */ + dwc_otg_hcd_complete_urb(_hcd, urb, status); dwc_otg_hcd_complete_urb(_hcd, urb, status); + save_data_toggle(_hc, _hc_regs, _qtd); save_data_toggle(_hc, _hc_regs, _qtd); + complete_periodic_xfer(_hcd, _hc, _hc_regs, _ complete_periodic_xfer(_hcd, _hc, _hc_regs, _ + DWC_OTG_HC_XFER_URB_C DWC_OTG_HC_XFER_URB_C + break; break; + case PIPE_ISOCHRONOUS: case PIPE_ISOCHRONOUS: + DWC_DEBUGPL(DBG_HCDV, " Isochronous transfer DWC_DEBUGPL(DBG_HCDV, " Isochronous transfer + if (_qtd->isoc_split_pos == DWC_HCSPLIT_XACTP if (_qtd->isoc_split_pos == DWC_HCSPLIT_XACTP + halt_status = update_isoc_urb_state(_ halt_status = update_isoc_urb_state(_ + DWC DWC + } } + complete_periodic_xfer(_hcd, _hc, _hc_regs, _ complete_periodic_xfer(_hcd, _hc, _hc_regs, _ + break; break; + } } + disable_hc_int(_hc_regs, xfercompl); disable_hc_int(_hc_regs, xfercompl); + return 1; return 1; +} } + +/** /** + * Handles a host channel STALL interrupt. This handler may b * Handles a host channel STALL interrupt. This handler may b + * either DMA mode or Slave mode. * either DMA mode or Slave mode. + */ */ +static int32_t handle_hc_stall_intr(dwc_otg_hcd_t * _hcd, static int32_t handle_hc_stall_intr(dwc_otg_hcd_t * _hcd, + dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg +{ { + struct urb *urb = _qtd->urb; struct urb *urb = _qtd->urb; + int pipe_type = usb_pipetype(urb->pipe); int pipe_type = usb_pipetype(urb->pipe); + DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " + "STALL Received--\n", _hc->hc_num); "STALL Received--\n", _hc->hc_num); + if (pipe_type == PIPE_CONTROL) { if (pipe_type == PIPE_CONTROL) { + dwc_otg_hcd_complete_urb(_hcd, _qtd->urb, -EP dwc_otg_hcd_complete_urb(_hcd, _qtd->urb, -EP + } } + if (pipe_type == PIPE_BULK || pipe_type == PIPE_INTER if (pipe_type == PIPE_BULK || pipe_type == PIPE_INTER + dwc_otg_hcd_complete_urb(_hcd, _qtd->urb, -EP dwc_otg_hcd_complete_urb(_hcd, _qtd->urb, -EP + /* /* + * USB protocol requires resetting the data toggl * USB protocol requires resetting the data toggl + * and interrupt endpoints when a CLEAR_FEATURE(E * and interrupt endpoints when a CLEAR_FEATURE(E + * setup command is issued to the endpoint. Antic * setup command is issued to the endpoint. Antic + * CLEAR_FEATURE command since a STALL has occurr * CLEAR_FEATURE command since a STALL has occurr + * the data toggle now. * the data toggle now. + */ */ + _hc->qh->data_toggle = 0; _hc->qh->data_toggle = 0; + } } + halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_STALL, halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_STALL, + disable_hc_int(_hc_regs, stall); disable_hc_int(_hc_regs, stall); + return 1; return 1; +} } + +/* /* + * Updates the state of the URB when a transfer has been stop * Updates the state of the URB when a transfer has been stop + * abnormal condition before the transfer completes. Modifies * abnormal condition before the transfer completes. Modifies + * actual_length field of the URB to reflect the number of by * actual_length field of the URB to reflect the number of by + * actually been transferred via the host channel. * actually been transferred via the host channel. + */ */ +static void update_urb_state_xfer_intr(dwc_hc_t * _hc, static void update_urb_state_xfer_intr(dwc_hc_t * _hc, + dwc_otg_hc_regs_t * _hc_regs, struct urb *_urb, dwc_o dwc_otg_hc_regs_t * _hc_regs, struct urb *_urb, dwc_o + dwc_otg_halt_status_e _halt_status) dwc_otg_halt_status_e _halt_status) +{ { + uint32_t bytes_transferred = uint32_t bytes_transferred = + get_actual_xfer_length(_hc, _hc_regs, _qtd, _halt get_actual_xfer_length(_hc, _hc_regs, _qtd, _halt + _urb->actual_length += bytes_transferred; _urb->actual_length += bytes_transferred; + +#ifdef CONFIG_DWC_DEBUG #ifdef CONFIG_DWC_DEBUG + { { + hctsiz_data_t hctsiz; hctsiz_data_t hctsiz; + hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz + DWC_DEBUGPL(DBG_HCDV, "DWC_otg: %s: %s, chann DWC_DEBUGPL(DBG_HCDV, "DWC_otg: %s: %s, chann + __func__, (_hc->ep_is_in ? "IN" __func__, (_hc->ep_is_in ? "IN" + DWC_DEBUGPL(DBG_HCDV, " _hc->start_pkt_count DWC_DEBUGPL(DBG_HCDV, " _hc->start_pkt_count + _hc->start_pkt_count); _hc->start_pkt_count); + DWC_DEBUGPL(DBG_HCDV, " hctsiz.pktcnt %d\n", DWC_DEBUGPL(DBG_HCDV, " hctsiz.pktcnt %d\n", + DWC_DEBUGPL(DBG_HCDV, " _hc->max_packet %d\n DWC_DEBUGPL(DBG_HCDV, " _hc->max_packet %d\n + DWC_DEBUGPL(DBG_HCDV, " bytes_transferred %d DWC_DEBUGPL(DBG_HCDV, " bytes_transferred %d + bytes_transferred); bytes_transferred); + DWC_DEBUGPL(DBG_HCDV, " _urb->actual_length DWC_DEBUGPL(DBG_HCDV, " _urb->actual_length + _urb->actual_length); _urb->actual_length); + DWC_DEBUGPL(DBG_HCDV, " _urb->transfer_buffe DWC_DEBUGPL(DBG_HCDV, " _urb->transfer_buffe + _urb->transfer_buffer_length); _urb->transfer_buffer_length); + } } +#endif /* */ #endif /* */ +} } + +/** /** + * Handles a host channel NAK interrupt. This handler may be * Handles a host channel NAK interrupt. This handler may be + * DMA mode or Slave mode. * DMA mode or Slave mode. + */ */ +static int32_t handle_hc_nak_intr(dwc_otg_hcd_t * _hcd, static int32_t handle_hc_nak_intr(dwc_otg_hcd_t * _hcd, + dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg + DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " + "NAK Received--\n", _hc->hc_num); "NAK Received--\n", _hc->hc_num); + /* /* + * Handle NAK for IN/OUT SSPLIT/CSPLIT transfers, bulk, c * Handle NAK for IN/OUT SSPLIT/CSPLIT transfers, bulk, c + * interrupt. Re-start the SSPLIT transfer. * interrupt. Re-start the SSPLIT transfer. + */ */ + if (_hc->do_split) { if (_hc->do_split) { + if (_hc->complete_split) { if (_hc->complete_split) { + _qtd->error_count = 0; _qtd->error_count = 0; + } } + _qtd->complete_split = 0; _qtd->complete_split = 0; + halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER + goto handle_nak_done; goto handle_nak_done; + } } + switch (usb_pipetype(_qtd->urb->pipe)) { switch (usb_pipetype(_qtd->urb->pipe)) { + case PIPE_CONTROL: case PIPE_CONTROL: + case PIPE_BULK: case PIPE_BULK: + if (_hcd->core_if->dma_enable && _hc->ep_is_i if (_hcd->core_if->dma_enable && _hc->ep_is_i + /* /* + * NAK interrupts are enabled on bulk/con * NAK interrupts are enabled on bulk/con + * transfers in DMA mode for the sole pur * transfers in DMA mode for the sole pur + * resetting the error count after a tran * resetting the error count after a tran + * occurs. The core will continue transfe * occurs. The core will continue transfe + */ */ + _qtd->error_count = 0; _qtd->error_count = 0; + goto handle_nak_done; goto handle_nak_done; + } } + + /* /* + * NAK interrupts normally occur during OUT trans * NAK interrupts normally occur during OUT trans + * or Slave mode. For IN transfers, more requests * or Slave mode. For IN transfers, more requests + * queued as request queue space is available. * queued as request queue space is available. + */ */ + _qtd->error_count = 0; _qtd->error_count = 0; + if (!_hc->qh->ping_state) { if (!_hc->qh->ping_state) { + update_urb_state_xfer_intr(_hc, _hc_r update_urb_state_xfer_intr(_hc, _hc_r + _qtd, DWC _qtd, DWC + save_data_toggle(_hc, _hc_regs, _qtd) save_data_toggle(_hc, _hc_regs, _qtd) + if (_qtd->urb->dev->speed == USB_SPEE if (_qtd->urb->dev->speed == USB_SPEE + _hc->qh->ping_state = 1; _hc->qh->ping_state = 1; + } } + } } + + /* /* + * Halt the channel so the transfer can be re-sta * Halt the channel so the transfer can be re-sta + * the appropriate point or the PING protocol wil * the appropriate point or the PING protocol wil + * start/continue. * start/continue. + */ */ + halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_NAK halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_NAK + break; break; + case PIPE_INTERRUPT: case PIPE_INTERRUPT: + _qtd->error_count = 0; _qtd->error_count = 0; + halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER + break; break; + case PIPE_ISOCHRONOUS: case PIPE_ISOCHRONOUS: + /* Should never get called for isochronous transf /* Should never get called for isochronous transf + BUG(); BUG(); + break; break; + } } + handle_nak_done:disable_hc_int(_hc_regs, nak); handle_nak_done:disable_hc_int(_hc_regs, nak); + > clear_hc_int(_hc_regs, nak); + return 1; return 1; +} } + +/** /** + * Handles a host channel ACK interrupt. This interrupt is en * Handles a host channel ACK interrupt. This interrupt is en + * performing the PING protocol in Slave mode, when errors oc * performing the PING protocol in Slave mode, when errors oc + * either Slave mode or DMA mode, and during Start Split tran * either Slave mode or DMA mode, and during Start Split tran + */ */ +static int32_t handle_hc_ack_intr(dwc_otg_hcd_t * _hcd, static int32_t handle_hc_ack_intr(dwc_otg_hcd_t * _hcd, + dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg +{ { + DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " + "ACK Received--\n", _hc->hc_num); "ACK Received--\n", _hc->hc_num); + if (_hc->do_split) { if (_hc->do_split) { + /* /* + * Handle ACK on SSPLIT. * Handle ACK on SSPLIT. + * ACK should not occur in CSPLIT. * ACK should not occur in CSPLIT. + */ */ + if ((!_hc->ep_is_in) && (_hc->data_pid_start != D if ((!_hc->ep_is_in) && (_hc->data_pid_start != D + _qtd->ssplit_out_xfer_count = _hc->xf _qtd->ssplit_out_xfer_count = _hc->xf + } } + if (!(_hc->ep_type == DWC_OTG_EP_TYPE_ISOC && if (!(_hc->ep_type == DWC_OTG_EP_TYPE_ISOC && + /* Don't need complete for isochr /* Don't need complete for isochr + _qtd->complete_split = 1; _qtd->complete_split = 1; + } } + + /* ISOC OUT */ /* ISOC OUT */ + if ((_hc->ep_type == DWC_OTG_EP_TYPE_ISOC) && !_h if ((_hc->ep_type == DWC_OTG_EP_TYPE_ISOC) && !_h + switch (_hc->xact_pos) { switch (_hc->xact_pos) { + case DWC_HCSPLIT_XACTPOS_ALL: case DWC_HCSPLIT_XACTPOS_ALL: + break; break; + case DWC_HCSPLIT_XACTPOS_END: case DWC_HCSPLIT_XACTPOS_END: + _qtd->isoc_split_pos = DWC_HC _qtd->isoc_split_pos = DWC_HC + _qtd->isoc_split_offset = 0; _qtd->isoc_split_offset = 0; + break; break; + case DWC_HCSPLIT_XACTPOS_BEGIN: case DWC_HCSPLIT_XACTPOS_BEGIN: + case DWC_HCSPLIT_XACTPOS_MID: case DWC_HCSPLIT_XACTPOS_MID: + /* /* + * For BEGIN or MID, calculate th * For BEGIN or MID, calculate th + * the next microframe to determi * the next microframe to determi + * SSPLIT token, either MID or EN * SSPLIT token, either MID or EN + */ */ + do { do { + struct usb_iso_packet struct usb_iso_packet + frame_desc = &_qtd->u frame_desc = &_qtd->u + _qtd->isoc_split_offs _qtd->isoc_split_offs + if ((frame_desc->leng if ((frame_desc->leng + _qtd->isoc_sp _qtd->isoc_sp + } else { } else { + _qtd->isoc_sp _qtd->isoc_sp + } } + } while (0); } while (0); + break; break; + } } + } else { } else { + halt_channel(_hcd, _hc, _qtd, DWC_OTG halt_channel(_hcd, _hc, _qtd, DWC_OTG + } } + } else { } else { + _qtd->error_count = 0; _qtd->error_count = 0; + if (_hc->qh->ping_state) { if (_hc->qh->ping_state) { + _hc->qh->ping_state = 0; _hc->qh->ping_state = 0; + + /* /* + * Halt the channel so the transfer can b * Halt the channel so the transfer can b + * from the appropriate point. This only * from the appropriate point. This only + * Slave mode. In DMA mode, the ping_stat * Slave mode. In DMA mode, the ping_stat + * when the transfer is started because t * when the transfer is started because t + * automatically executes the PING, then * automatically executes the PING, then + */ */ + halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_ halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_ + } else { < + halt_channel(_hcd, _hc, _qtd, _hc->halt_s < + } } + } } + + /* /* + * If the ACK occurred when _not_ in the PING state, let * If the ACK occurred when _not_ in the PING state, let + * continue transferring data after clearing the error co * continue transferring data after clearing the error co + */ */ + disable_hc_int(_hc_regs, ack); disable_hc_int(_hc_regs, ack); + > clear_hc_int(_hc_regs, ack); + return 1; return 1; +} } + +/** /** + * Handles a host channel NYET interrupt. This interrupt shou * Handles a host channel NYET interrupt. This interrupt shou + * Bulk and Control OUT endpoints and for complete split tran * Bulk and Control OUT endpoints and for complete split tran + * NYET occurs at the same time as a Transfer Complete interr * NYET occurs at the same time as a Transfer Complete interr + * handled in the xfercomp interrupt handler, not here. This * handled in the xfercomp interrupt handler, not here. This + * called in either DMA mode or Slave mode. * called in either DMA mode or Slave mode. + */ */ +static int32_t handle_hc_nyet_intr(dwc_otg_hcd_t * _hcd, static int32_t handle_hc_nyet_intr(dwc_otg_hcd_t * _hcd, + dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg +{ { + DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " + "NYET Received--\n", _hc->hc_num); "NYET Received--\n", _hc->hc_num); + + /* /* + * NYET on CSPLIT * NYET on CSPLIT + * re-do the CSPLIT immediately on non-periodic * re-do the CSPLIT immediately on non-periodic + */ */ + if ((_hc->do_split) && (_hc->complete_split)) { if ((_hc->do_split) && (_hc->complete_split)) { + if ((_hc->ep_type == DWC_OTG_EP_TYPE_INTR) || if ((_hc->ep_type == DWC_OTG_EP_TYPE_INTR) || + (_hc->ep_type == DWC_OTG_EP_TYPE_ISOC)) (_hc->ep_type == DWC_OTG_EP_TYPE_ISOC)) + int frnum = dwc_otg_hcd_get_frame_num int frnum = dwc_otg_hcd_get_frame_num + (_hc (_hc + if (dwc_full_frame_num(frnum) != if (dwc_full_frame_num(frnum) != + dwc_full_frame_num(_hc->qh->sch dwc_full_frame_num(_hc->qh->sch + + /* /* + * No longer in the same full spe * No longer in the same full spe + * Treat this as a transaction er * Treat this as a transaction er + */ */ +#if 0 #if 0 + /** @todo Fix system performa /** @todo Fix system performa + * be treated as an error. Ri * be treated as an error. Ri + * splits cannot be scheduled * splits cannot be scheduled + * due to other system activi * due to other system activi + * occurs regularly in Slave * occurs regularly in Slave + */ */ + _qtd->error_count++; _qtd->error_count++; + +#endif /* */ #endif /* */ + _qtd->complete_split = 0; _qtd->complete_split = 0; + halt_channel(_hcd, _hc, _qtd, halt_channel(_hcd, _hc, _qtd, + + /** @todo add support for iso /** @todo add support for iso + goto handle_nyet_done; goto handle_nyet_done; + } } + } } + halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER + goto handle_nyet_done; goto handle_nyet_done; + } } + _hc->qh->ping_state = 1; _hc->qh->ping_state = 1; + _qtd->error_count = 0; _qtd->error_count = 0; + update_urb_state_xfer_intr(_hc, _hc_regs, _qtd->urb, update_urb_state_xfer_intr(_hc, _hc_regs, _qtd->urb, + DWC_OTG_HC_XFER_NYET); DWC_OTG_HC_XFER_NYET); + save_data_toggle(_hc, _hc_regs, _qtd); save_data_toggle(_hc, _hc_regs, _qtd); + + /* /* + * Halt the channel and re-start the transfer so the PING * Halt the channel and re-start the transfer so the PING + * protocol will start. * protocol will start. + */ */ + halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_NYET, must_ halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_NYET, must_ +handle_nyet_done: handle_nyet_done: + disable_hc_int(_hc_regs, nyet); disable_hc_int(_hc_regs, nyet); + clear_hc_int(_hc_regs, nyet); clear_hc_int(_hc_regs, nyet); + + return 1; return 1; +} } + +/** /** + * Handles a host channel babble interrupt. This handler may * Handles a host channel babble interrupt. This handler may + * either DMA mode or Slave mode. * either DMA mode or Slave mode. + */ */ +static int32_t handle_hc_babble_intr(dwc_otg_hcd_t * _hcd, static int32_t handle_hc_babble_intr(dwc_otg_hcd_t * _hcd, + dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg +{ { + DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " + "Babble Error--\n", _hc->hc_num); "Babble Error--\n", _hc->hc_num); + if (_hc->ep_type != DWC_OTG_EP_TYPE_ISOC) { if (_hc->ep_type != DWC_OTG_EP_TYPE_ISOC) { + dwc_otg_hcd_complete_urb(_hcd, _qtd->urb, -EO dwc_otg_hcd_complete_urb(_hcd, _qtd->urb, -EO + halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER + } else { } else { + dwc_otg_halt_status_e halt_status; dwc_otg_halt_status_e halt_status; + halt_status = update_isoc_urb_state(_hcd, _hc halt_status = update_isoc_urb_state(_hcd, _hc + DWC_OTG_HC_XFER_BAB DWC_OTG_HC_XFER_BAB + halt_channel(_hcd, _hc, _qtd, halt_status, mu halt_channel(_hcd, _hc, _qtd, halt_status, mu + } } + disable_hc_int(_hc_regs, bblerr); disable_hc_int(_hc_regs, bblerr); + return 1; return 1; +} } + +/** /** + * Handles a host channel AHB error interrupt. This handler i * Handles a host channel AHB error interrupt. This handler i + * DMA mode. * DMA mode. + */ */ +static int32_t handle_hc_ahberr_intr(dwc_otg_hcd_t * _hcd, static int32_t handle_hc_ahberr_intr(dwc_otg_hcd_t * _hcd, + dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg +{ { + hcchar_data_t hcchar; hcchar_data_t hcchar; + hcsplt_data_t hcsplt; hcsplt_data_t hcsplt; + hctsiz_data_t hctsiz; hctsiz_data_t hctsiz; + uint32_t hcdma; uint32_t hcdma; + struct urb *urb = _qtd->urb; struct urb *urb = _qtd->urb; + DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " + "AHB Error--\n", _hc->hc_num); "AHB Error--\n", _hc->hc_num); + hcchar.d32 = dwc_read_reg32(&_hc_regs->hcchar); hcchar.d32 = dwc_read_reg32(&_hc_regs->hcchar); + hcsplt.d32 = dwc_read_reg32(&_hc_regs->hcsplt); hcsplt.d32 = dwc_read_reg32(&_hc_regs->hcsplt); + hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz); hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz); + hcdma = dwc_read_reg32(&_hc_regs->hcdma); hcdma = dwc_read_reg32(&_hc_regs->hcdma); + DWC_ERROR("AHB ERROR, Channel %d\n", _hc->hc_num); DWC_ERROR("AHB ERROR, Channel %d\n", _hc->hc_num); + DWC_ERROR(" hcchar 0x%08x, hcsplt 0x%08x\n", hcchar. DWC_ERROR(" hcchar 0x%08x, hcsplt 0x%08x\n", hcchar. + DWC_ERROR(" hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d DWC_ERROR(" hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Enqueue\n"); DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Enqueue\n"); + DWC_ERROR(" Device address: %d\n", usb_pipedevice(ur DWC_ERROR(" Device address: %d\n", usb_pipedevice(ur + DWC_ERROR(" Endpoint: %d, %s\n", usb_pipeendpoint(ur DWC_ERROR(" Endpoint: %d, %s\n", usb_pipeendpoint(ur + (usb_pipein(urb->pipe) ? "IN" : "OUT" (usb_pipein(urb->pipe) ? "IN" : "OUT" + DWC_ERROR(" Endpoint type: %s\n", ( { DWC_ERROR(" Endpoint type: %s\n", ( { + char *pipetype; char *pipetype; + switch (usb_pipetype(urb->pipe)) { switch (usb_pipetype(urb->pipe)) { + case PIPE_CONTROL: case PIPE_CONTROL: + pipetype = "CONTROL"; break; pipetype = "CONTROL"; break; + case PIPE_BULK: case PIPE_BULK: + pipetype = "BULK"; break; pipetype = "BULK"; break; + case PIPE_INTERRUPT: case PIPE_INTERRUPT: + pipetype = "INTERRUPT"; break pipetype = "INTERRUPT"; break + case PIPE_ISOCHRONOUS: case PIPE_ISOCHRONOUS: + pipetype = "ISOCHRONOUS"; bre pipetype = "ISOCHRONOUS"; bre + default: default: + pipetype = "UNKNOWN"; break; pipetype = "UNKNOWN"; break; + }; }; + pipetype; pipetype; + } )) ; } )) ; + DWC_ERROR(" Speed: %s\n", ( { DWC_ERROR(" Speed: %s\n", ( { + char *speed; char *speed; + switch (urb->dev->speed) { switch (urb->dev->speed) { + case USB_SPEED_HIGH: case USB_SPEED_HIGH: + speed = "HIGH"; break; speed = "HIGH"; break; + case USB_SPEED_FULL: case USB_SPEED_FULL: + speed = "FULL"; break; speed = "FULL"; break; + case USB_SPEED_LOW: case USB_SPEED_LOW: + speed = "LOW"; break; speed = "LOW"; break; + default: default: + speed = "UNKNOWN"; break; speed = "UNKNOWN"; break; + }; }; + speed; speed; + } )) ; } )) ; + DWC_ERROR(" Max packet size: %d\n", DWC_ERROR(" Max packet size: %d\n", + usb_maxpacket(urb->dev, urb->pipe, usb_pip usb_maxpacket(urb->dev, urb->pipe, usb_pip + DWC_ERROR(" Data buffer length: %d\n", urb->transfer DWC_ERROR(" Data buffer length: %d\n", urb->transfer + DWC_ERROR(" Transfer buffer: %p, Transfer DMA: %p\n" DWC_ERROR(" Transfer buffer: %p, Transfer DMA: %p\n" + urb->transfer_buffer, (void *)(u32)urb->tra urb->transfer_buffer, (void *)(u32)urb->tra + DWC_ERROR(" Setup buffer: %p, Setup DMA: %p\n", urb- DWC_ERROR(" Setup buffer: %p, Setup DMA: %p\n", urb- + (void *)(u32)urb->setup_dma); (void *)(u32)urb->setup_dma); + DWC_ERROR(" Interval: %d\n", urb->interval); DWC_ERROR(" Interval: %d\n", urb->interval); + dwc_otg_hcd_complete_urb(_hcd, urb, -EIO); dwc_otg_hcd_complete_urb(_hcd, urb, -EIO); + + /* /* + * Force a channel halt. Don't call halt_channel because * Force a channel halt. Don't call halt_channel because + * write to the HCCHARn register in DMA mode to force the * write to the HCCHARn register in DMA mode to force the + */ */ + dwc_otg_hc_halt(_hcd->core_if, _hc, DWC_OTG_HC_XFER_AHB_E dwc_otg_hc_halt(_hcd->core_if, _hc, DWC_OTG_HC_XFER_AHB_E + disable_hc_int(_hc_regs, ahberr); disable_hc_int(_hc_regs, ahberr); + return 1; return 1; +} } + +/** /** + * Handles a host channel transaction error interrupt. This h * Handles a host channel transaction error interrupt. This h + * called in either DMA mode or Slave mode. * called in either DMA mode or Slave mode. + */ */ +static int32_t handle_hc_xacterr_intr(dwc_otg_hcd_t * _hcd, static int32_t handle_hc_xacterr_intr(dwc_otg_hcd_t * _hcd, + dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg +{ { + DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " + "Transaction Error--\n", _hc->hc_num); "Transaction Error--\n", _hc->hc_num); + switch (usb_pipetype(_qtd->urb->pipe)) { switch (usb_pipetype(_qtd->urb->pipe)) { + case PIPE_CONTROL: case PIPE_CONTROL: + case PIPE_BULK: case PIPE_BULK: + _qtd->error_count++; _qtd->error_count++; + if (!_hc->qh->ping_state) { if (!_hc->qh->ping_state) { + update_urb_state_xfer_intr(_hc, _hc_r update_urb_state_xfer_intr(_hc, _hc_r + _qtd, DWC_OTG_HC_XFER_XAC _qtd, DWC_OTG_HC_XFER_XAC + save_data_toggle(_hc, _hc_regs, _qtd) save_data_toggle(_hc, _hc_regs, _qtd) + if (!_hc->ep_is_in && _qtd->urb->dev- if (!_hc->ep_is_in && _qtd->urb->dev- + _hc->qh->ping_state = 1; _hc->qh->ping_state = 1; + } } + } } + + /* /* + * Halt the channel so the transfer can be re-sta * Halt the channel so the transfer can be re-sta + * the appropriate point or the PING protocol wil * the appropriate point or the PING protocol wil + */ */ + halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_XAC halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_XAC + break; break; + case PIPE_INTERRUPT: case PIPE_INTERRUPT: + _qtd->error_count++; _qtd->error_count++; + if ((_hc->do_split) && (_hc->complete_split)) if ((_hc->do_split) && (_hc->complete_split)) + _qtd->complete_split = 0; _qtd->complete_split = 0; + } } + halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER + break; break; + case PIPE_ISOCHRONOUS: case PIPE_ISOCHRONOUS: + { { + dwc_otg_halt_status_e halt_status; dwc_otg_halt_status_e halt_status; + halt_status = update_isoc_urb_state(_ halt_status = update_isoc_urb_state(_ + DWC_OTG_HC_ DWC_OTG_HC_ + halt_channel(_hcd, _hc, _qtd, halt_st halt_channel(_hcd, _hc, _qtd, halt_st + } } + break; break; + } } + disable_hc_int(_hc_regs, xacterr); disable_hc_int(_hc_regs, xacterr); + return 1; return 1; +} } + +/** /** + * Handles a host channel frame overrun interrupt. This handl * Handles a host channel frame overrun interrupt. This handl + * in either DMA mode or Slave mode. * in either DMA mode or Slave mode. + */ */ +static int32_t handle_hc_frmovrun_intr(dwc_otg_hcd_t * _hcd, static int32_t handle_hc_frmovrun_intr(dwc_otg_hcd_t * _hcd, + dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg +{ { + DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " + "Frame Overrun--\n", _hc->hc_num); "Frame Overrun--\n", _hc->hc_num); + switch (usb_pipetype(_qtd->urb->pipe)) { switch (usb_pipetype(_qtd->urb->pipe)) { + case PIPE_CONTROL: case PIPE_CONTROL: + case PIPE_BULK: case PIPE_BULK: + break; break; + case PIPE_INTERRUPT: case PIPE_INTERRUPT: + halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER + break; break; + case PIPE_ISOCHRONOUS: case PIPE_ISOCHRONOUS: + { { + dwc_otg_halt_status_e halt_status; dwc_otg_halt_status_e halt_status; + halt_status = update_isoc_urb_state(_ halt_status = update_isoc_urb_state(_ + DWC_OTG_HC_ DWC_OTG_HC_ + halt_channel(_hcd, _hc, _qtd, halt_st halt_channel(_hcd, _hc, _qtd, halt_st + } } + break; break; + } } + disable_hc_int(_hc_regs, frmovrun); disable_hc_int(_hc_regs, frmovrun); + return 1; return 1; +} } + +/** /** + * Handles a host channel data toggle error interrupt. This h * Handles a host channel data toggle error interrupt. This h + * called in either DMA mode or Slave mode. * called in either DMA mode or Slave mode. + */ */ +static int32_t handle_hc_datatglerr_intr(dwc_otg_hcd_t * _hcd static int32_t handle_hc_datatglerr_intr(dwc_otg_hcd_t * _hcd + dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg +{ { + DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " + "Data Toggle Error--\n", _hc->hc_num); "Data Toggle Error--\n", _hc->hc_num); + if (_hc->ep_is_in) { if (_hc->ep_is_in) { + _qtd->error_count = 0; _qtd->error_count = 0; + } else { } else { + DWC_ERROR("Data Toggle Error on OUT transfer, DWC_ERROR("Data Toggle Error on OUT transfer, + "channel %d\n", _hc->hc_num); "channel %d\n", _hc->hc_num); + } } + disable_hc_int(_hc_regs, datatglerr); disable_hc_int(_hc_regs, datatglerr); + return 1; return 1; +} } + +#ifdef CONFIG_DWC_DEBUG #ifdef CONFIG_DWC_DEBUG +/** /** + * This function is for debug only. It checks that a valid ha * This function is for debug only. It checks that a valid ha + * and that HCCHARn.chdis is clear. If there's a problem, cor * and that HCCHARn.chdis is clear. If there's a problem, cor + * taken and a warning is issued. * taken and a warning is issued. + * @return 1 if halt status is ok, 0 otherwise. * @return 1 if halt status is ok, 0 otherwise. + */ */ +static inline int halt_status_ok(dwc_otg_hcd_t * _hcd, static inline int halt_status_ok(dwc_otg_hcd_t * _hcd, + dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg | dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg +{ { + hcchar_data_t hcchar; hcchar_data_t hcchar; + hctsiz_data_t hctsiz; hctsiz_data_t hctsiz; + hcint_data_t hcint; hcint_data_t hcint; + hcintmsk_data_t hcintmsk; hcintmsk_data_t hcintmsk; + hcsplt_data_t hcsplt; hcsplt_data_t hcsplt; + if (_hc->halt_status == DWC_OTG_HC_XFER_NO_HALT_STATU if (_hc->halt_status == DWC_OTG_HC_XFER_NO_HALT_STATU + /* /* + * This code is here only as a check. This condit * This code is here only as a check. This condit + * never happen. Ignore the halt if it does occur * never happen. Ignore the halt if it does occur + */ */ + hcchar.d32 = dwc_read_reg32(&_hc_regs->hcchar); hcchar.d32 = dwc_read_reg32(&_hc_regs->hcchar); + hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz + hcint.d32 = dwc_read_reg32(&_hc_regs->hcint); hcint.d32 = dwc_read_reg32(&_hc_regs->hcint); + hcintmsk.d32 = dwc_read_reg32(&_hc_regs->hcin hcintmsk.d32 = dwc_read_reg32(&_hc_regs->hcin + hcsplt.d32 = dwc_read_reg32(&_hc_regs->hcsplt hcsplt.d32 = dwc_read_reg32(&_hc_regs->hcsplt + DWC_WARN("%s: _hc->halt_status == DWC_OTG_HC_ DWC_WARN("%s: _hc->halt_status == DWC_OTG_HC_ + "channel %d, hcchar 0x%08x, hctsiz 0x%0 "channel %d, hcchar 0x%08x, hctsiz 0x%0 + "hcint 0x%08x, hcintmsk 0x%08x, " "hcint 0x%08x, hcintmsk 0x%08x, " + "hcsplt 0x%08x, qtd->complete_split %d\n "hcsplt 0x%08x, qtd->complete_split %d\n + _hc->hc_num, hcchar.d32, hctsiz.d32, hci _hc->hc_num, hcchar.d32, hctsiz.d32, hci + hcintmsk.d32, hcsplt.d32, _qtd->complete hcintmsk.d32, hcsplt.d32, _qtd->complete + DWC_WARN("%s: no halt status, channel %d, ign DWC_WARN("%s: no halt status, channel %d, ign + __func__, _hc->hc_num); __func__, _hc->hc_num); + DWC_WARN("\n"); DWC_WARN("\n"); + clear_hc_int(_hc_regs, chhltd); clear_hc_int(_hc_regs, chhltd); + return 0; return 0; + } } + + /* /* + * This code is here only as a check. hcchar.chdis should * This code is here only as a check. hcchar.chdis should + * never be set when the halt interrupt occurs. Halt the * never be set when the halt interrupt occurs. Halt the + * channel again if it does occur. * channel again if it does occur. + */ */ + hcchar.d32 = dwc_read_reg32(&_hc_regs->hcchar); hcchar.d32 = dwc_read_reg32(&_hc_regs->hcchar); + if (hcchar.b.chdis) { if (hcchar.b.chdis) { + DWC_WARN("%s: hcchar.chdis set unexpectedly, DWC_WARN("%s: hcchar.chdis set unexpectedly, + "hcchar 0x%08x, trying to halt agai "hcchar 0x%08x, trying to halt agai + hcchar.d32); hcchar.d32); + clear_hc_int(_hc_regs, chhltd); clear_hc_int(_hc_regs, chhltd); + _hc->halt_pending = 0; _hc->halt_pending = 0; + halt_channel(_hcd, _hc, _qtd, _hc->halt_statu halt_channel(_hcd, _hc, _qtd, _hc->halt_statu + return 0; return 0; + } } + return 1; return 1; +} } +#endif /* */ #endif /* */ + +/** /** + * Handles a host Channel Halted interrupt in DMA mode. This * Handles a host Channel Halted interrupt in DMA mode. This + * determines the reason the channel halted and proceeds acco * determines the reason the channel halted and proceeds acco + */ */ +static void handle_hc_chhltd_intr_dma(dwc_otg_hcd_t * _hcd, static void handle_hc_chhltd_intr_dma(dwc_otg_hcd_t * _hcd, + dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg +{ { + hcint_data_t hcint; hcint_data_t hcint; + hcintmsk_data_t hcintmsk; hcintmsk_data_t hcintmsk; + if (_hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE | if (_hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE | + _hc->halt_status == DWC_OTG_HC_XFER_AHB_ERR) _hc->halt_status == DWC_OTG_HC_XFER_AHB_ERR) + /* /* + * Just release the channel. A dequeue can happen * Just release the channel. A dequeue can happen + * transfer timeout. In the case of an AHB Error, * transfer timeout. In the case of an AHB Error, + * was forced to halt because there's no way to g * was forced to halt because there's no way to g + * recover. * recover. + */ */ + release_channel(_hcd, _hc, _qtd, _hc->halt_status release_channel(_hcd, _hc, _qtd, _hc->halt_status + return; return; + } } + + /* Read the HCINTn register to determine the cause for th /* Read the HCINTn register to determine the cause for th + hcint.d32 = dwc_read_reg32(&_hc_regs->hcint); hcint.d32 = dwc_read_reg32(&_hc_regs->hcint); + hcintmsk.d32 = dwc_read_reg32(&_hc_regs->hcintmsk); hcintmsk.d32 = dwc_read_reg32(&_hc_regs->hcintmsk); + if (hcint.b.xfercomp) { if (hcint.b.xfercomp) { + + /** @todo This is here because of a possible /** @todo This is here because of a possible + * says that on SPLIT-ISOC OUT transfers in D * says that on SPLIT-ISOC OUT transfers in D + * interrupt w/ACK bit set should occur, but * interrupt w/ACK bit set should occur, but + * XFERCOMP bit, even with it masked out. Th * XFERCOMP bit, even with it masked out. Th + * for that behavior. Should fix this when h * for that behavior. Should fix this when h + */ */ + if ((_hc->ep_type == DWC_OTG_EP_TYPE_ISOC) && (!_ if ((_hc->ep_type == DWC_OTG_EP_TYPE_ISOC) && (!_ + handle_hc_ack_intr(_hcd, _hc, _hc_reg handle_hc_ack_intr(_hcd, _hc, _hc_reg + } } + handle_hc_xfercomp_intr(_hcd, _hc, _hc_regs, handle_hc_xfercomp_intr(_hcd, _hc, _hc_regs, + } else if (hcint.b.stall) { } else if (hcint.b.stall) { + handle_hc_stall_intr(_hcd, _hc, _hc_regs, _qt handle_hc_stall_intr(_hcd, _hc, _hc_regs, _qt + } else if (hcint.b.xacterr) { } else if (hcint.b.xacterr) { + /* /* + * Must handle xacterr before nak or ack. Could g * Must handle xacterr before nak or ack. Could g + * at the same time as either of these on a BULK/ * at the same time as either of these on a BULK/ + * that started with a PING. The xacterr takes pr * that started with a PING. The xacterr takes pr + */ */ + handle_hc_xacterr_intr(_hcd, _hc, _hc_regs, _qtd, handle_hc_xacterr_intr(_hcd, _hc, _hc_regs, _qtd, + } else if (hcint.b.nyet) { } else if (hcint.b.nyet) { + /* /* + * Must handle nyet before nak or ack. Could get * Must handle nyet before nak or ack. Could get + * same time as either of those on a BULK/CONTROL * same time as either of those on a BULK/CONTROL + * started with a PING. The nyet takes precedence * started with a PING. The nyet takes precedence + */ */ + handle_hc_nyet_intr(_hcd, _hc, _hc_regs, _qtd, mu handle_hc_nyet_intr(_hcd, _hc, _hc_regs, _qtd, mu + } else if (hcint.b.bblerr) { } else if (hcint.b.bblerr) { + handle_hc_babble_intr(_hcd, _hc, _hc_regs, _q handle_hc_babble_intr(_hcd, _hc, _hc_regs, _q + } else if (hcint.b.frmovrun) { } else if (hcint.b.frmovrun) { + handle_hc_frmovrun_intr(_hcd, _hc, _hc_regs, handle_hc_frmovrun_intr(_hcd, _hc, _hc_regs, + } else if (hcint.b.datatglerr) { } else if (hcint.b.datatglerr) { + handle_hc_datatglerr_intr(_hcd, _hc, _hc_regs handle_hc_datatglerr_intr(_hcd, _hc, _hc_regs + _hc->qh->data_toggle = 0; < + halt_channel(_hcd, _hc, _qtd, _hc->halt_statu < + } else if (hcint.b.nak && !hcintmsk.b.nak) { } else if (hcint.b.nak && !hcintmsk.b.nak) { + /* /* + * If nak is not masked, it's because a non-split * If nak is not masked, it's because a non-split + * is in an error state. In that case, the nak is * is in an error state. In that case, the nak is + * the nak interrupt handler, not here. Handle na * the nak interrupt handler, not here. Handle na + * BULK/CONTROL OUT transfers, which halt on a NA * BULK/CONTROL OUT transfers, which halt on a NA + * rewinding the buffer pointer. * rewinding the buffer pointer. + */ */ + handle_hc_nak_intr(_hcd, _hc, _hc_regs, _qtd, mus handle_hc_nak_intr(_hcd, _hc, _hc_regs, _qtd, mus + } else if (hcint.b.ack && !hcintmsk.b.ack) { } else if (hcint.b.ack && !hcintmsk.b.ack) { + /* /* + * If ack is not masked, it's because a non-split * If ack is not masked, it's because a non-split + * is in an error state. In that case, the ack is * is in an error state. In that case, the ack is + * the ack interrupt handler, not here. Handle ac * the ack interrupt handler, not here. Handle ac + * split transfers. Start splits halt on ACK. * split transfers. Start splits halt on ACK. + */ */ + handle_hc_ack_intr(_hcd, _hc, _hc_regs, _qtd, mus handle_hc_ack_intr(_hcd, _hc, _hc_regs, _qtd, mus + } else { } else { + if (_hc->ep_type == DWC_OTG_EP_TYPE_INTR || if (_hc->ep_type == DWC_OTG_EP_TYPE_INTR || + _hc->ep_type == DWC_OTG_EP_TYPE_ISOC) _hc->ep_type == DWC_OTG_EP_TYPE_ISOC) + /* /* + * A periodic transfer halted with no oth * A periodic transfer halted with no oth + * interrupts set. Assume it was halted b * interrupts set. Assume it was halted b + * because it could not be completed in i * because it could not be completed in i + * (micro)frame. * (micro)frame. + */ */ +#ifdef CONFIG_DWC_DEBUG #ifdef CONFIG_DWC_DEBUG + DWC_PRINT("%s: Halt channel %d (assume in DWC_PRINT("%s: Halt channel %d (assume in + __func__, _hc->hc_num); __func__, _hc->hc_num); + +#endif /* */ #endif /* */ + halt_channel(_hcd, _hc, _qtd, halt_channel(_hcd, _hc, _qtd, + DWC_OTG_HC_XFER_PERI DWC_OTG_HC_XFER_PERI + } else { } else { +#ifdef CONFIG_DWC_DEBUG < + DWC_ERROR("%s: Channel %d, DMA Mode - DWC_ERROR("%s: Channel %d, DMA Mode - + "for halting is unknown, nyet %d "for halting is unknown, nyet %d + __func__, _hc->hc_num, hcint.b.n __func__, _hc->hc_num, hcint.b.n + dwc_read_reg32(&_hcd->core_i dwc_read_reg32(&_hcd->core_i +#endif < + halt_channel(_hcd, _hc, _qtd, _hc->ha < + } } + } } +} } + +/** /** + * Handles a host channel Channel Halted interrupt. * Handles a host channel Channel Halted interrupt. + * * + * In slave mode, this handler is called only when the driver * In slave mode, this handler is called only when the driver + * requests a halt. This occurs during handling other host ch * requests a halt. This occurs during handling other host ch + * (e.g. nak, xacterr, stall, nyet, etc.). * (e.g. nak, xacterr, stall, nyet, etc.). + * * + * In DMA mode, this is the interrupt that occurs when the co * In DMA mode, this is the interrupt that occurs when the co + * processing a transfer on a channel. Other host channel int * processing a transfer on a channel. Other host channel int + * ahberr) are disabled in DMA mode. * ahberr) are disabled in DMA mode. + */ */ +static int32_t handle_hc_chhltd_intr(dwc_otg_hcd_t * _hcd, static int32_t handle_hc_chhltd_intr(dwc_otg_hcd_t * _hcd, + dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg +{ { + DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " + "Channel Halted--\n", _hc->hc_num); "Channel Halted--\n", _hc->hc_num); + if (_hcd->core_if->dma_enable) { if (_hcd->core_if->dma_enable) { + handle_hc_chhltd_intr_dma(_hcd, _hc, _hc_regs handle_hc_chhltd_intr_dma(_hcd, _hc, _hc_regs + } else { } else { +#ifdef CONFIG_DWC_DEBUG #ifdef CONFIG_DWC_DEBUG + if (!halt_status_ok(_hcd, _hc, _hc_regs, _qtd, mu | if (!halt_status_ok(_hcd, _hc, _hc_regs, _qtd)) { + return 1; return 1; + } } +#endif /* */ #endif /* */ + release_channel(_hcd, _hc, _qtd, _hc->halt_status release_channel(_hcd, _hc, _qtd, _hc->halt_status + } } + > clear_hc_int(_hc_regs, chhltd); + return 1; return 1; +} } + +/** Handles interrupt for a specific Host Channel */ /** Handles interrupt for a specific Host Channel */ +int32_t dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd_t * _dwc_otg int32_t dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd_t * _dwc_otg +{ { + int must_free = 0; int must_free = 0; + int retval = 0; int retval = 0; + hcint_data_t hcint; hcint_data_t hcint; + hcintmsk_data_t hcintmsk; hcintmsk_data_t hcintmsk; + dwc_hc_t * hc; dwc_hc_t * hc; + dwc_otg_hc_regs_t * hc_regs; dwc_otg_hc_regs_t * hc_regs; + dwc_otg_qtd_t * qtd; dwc_otg_qtd_t * qtd; + DWC_DEBUGPL(DBG_HCDV, "--Host Channel Interrupt--, Ch DWC_DEBUGPL(DBG_HCDV, "--Host Channel Interrupt--, Ch + hc = _dwc_otg_hcd->hc_ptr_array[_num]; hc = _dwc_otg_hcd->hc_ptr_array[_num]; + hc_regs = _dwc_otg_hcd->core_if->host_if->hc_regs[_nu hc_regs = _dwc_otg_hcd->core_if->host_if->hc_regs[_nu + qtd = list_entry(hc->qh->qtd_list.next, dwc_otg_qtd_t qtd = list_entry(hc->qh->qtd_list.next, dwc_otg_qtd_t + hcint.d32 = dwc_read_reg32(&hc_regs->hcint); hcint.d32 = dwc_read_reg32(&hc_regs->hcint); + hcintmsk.d32 = dwc_read_reg32(&hc_regs->hcintmsk); hcintmsk.d32 = dwc_read_reg32(&hc_regs->hcintmsk); + DWC_DEBUGPL(DBG_HCDV, " hcint 0x%08x, hcintmsk 0x%08x DWC_DEBUGPL(DBG_HCDV, " hcint 0x%08x, hcintmsk 0x%08x + hcint.d32, hcintmsk.d32, (hcint.d32 & hc hcint.d32, hcintmsk.d32, (hcint.d32 & hc + hcint.d32 = hcint.d32 & hcintmsk.d32; hcint.d32 = hcint.d32 & hcintmsk.d32; + if (!_dwc_otg_hcd->core_if->dma_enable) { if (!_dwc_otg_hcd->core_if->dma_enable) { + if ((hcint.b.chhltd) && (hcint.d32 != 0x2)) { if ((hcint.b.chhltd) && (hcint.d32 != 0x2)) { + hcint.b.chhltd = 0; hcint.b.chhltd = 0; + } } + } } + if (hcint.b.xfercomp) { if (hcint.b.xfercomp) { + retval |= handle_hc_xfercomp_intr(_dwc_otg_hc retval |= handle_hc_xfercomp_intr(_dwc_otg_hc + /* /* + * If NYET occurred at same time as Xfer Complete * If NYET occurred at same time as Xfer Complete + * handled by the Xfer Complete interrupt handler * handled by the Xfer Complete interrupt handler + * to call the NYET interrupt handler in this cas * to call the NYET interrupt handler in this cas + */ */ + hcint.b.nyet = 0; hcint.b.nyet = 0; + } } + if (hcint.b.chhltd) { if (hcint.b.chhltd) { + retval |= handle_hc_chhltd_intr(_dwc_otg_hcd, retval |= handle_hc_chhltd_intr(_dwc_otg_hcd, + } } + if (hcint.b.ahberr) { if (hcint.b.ahberr) { + retval |= handle_hc_ahberr_intr(_dwc_otg_hcd, retval |= handle_hc_ahberr_intr(_dwc_otg_hcd, + } } + if (hcint.b.stall) { if (hcint.b.stall) { + retval |= handle_hc_stall_intr(_dwc_otg_hcd, retval |= handle_hc_stall_intr(_dwc_otg_hcd, + } } + if (hcint.b.nak) { if (hcint.b.nak) { + retval |= handle_hc_nak_intr(_dwc_otg_hcd, hc retval |= handle_hc_nak_intr(_dwc_otg_hcd, hc + } } + if (hcint.b.ack) { if (hcint.b.ack) { + retval |= handle_hc_ack_intr(_dwc_otg_hcd, hc retval |= handle_hc_ack_intr(_dwc_otg_hcd, hc + } } + if (hcint.b.nyet) { if (hcint.b.nyet) { + retval |= handle_hc_nyet_intr(_dwc_otg_hcd, h retval |= handle_hc_nyet_intr(_dwc_otg_hcd, h + } } + if (hcint.b.xacterr) { if (hcint.b.xacterr) { + retval |= handle_hc_xacterr_intr(_dwc_otg_hcd retval |= handle_hc_xacterr_intr(_dwc_otg_hcd + } } + if (hcint.b.bblerr) { if (hcint.b.bblerr) { + retval |= handle_hc_babble_intr(_dwc_otg_hcd, retval |= handle_hc_babble_intr(_dwc_otg_hcd, + } } + if (hcint.b.frmovrun) { if (hcint.b.frmovrun) { + retval |= handle_hc_frmovrun_intr(_dwc_otg_hc retval |= handle_hc_frmovrun_intr(_dwc_otg_hc + } } + if (hcint.b.datatglerr) { if (hcint.b.datatglerr) { + retval |= handle_hc_datatglerr_intr(_dwc_otg_ retval |= handle_hc_datatglerr_intr(_dwc_otg_ + } } + /* /* + * Logic to free the qtd here, at the end of the hc i * Logic to free the qtd here, at the end of the hc i + * processing, if the handling of this interrupt dete * processing, if the handling of this interrupt dete + * that it needs to be freed. * that it needs to be freed. + */ */ + if (must_free) { if (must_free) { + /* Free the qtd here now that we are done usi /* Free the qtd here now that we are done usi + dwc_otg_hcd_qtd_free(qtd); dwc_otg_hcd_qtd_free(qtd); + } } + return retval; return retval; +} } + +#endif /* DWC_DEVICE_ONLY */ #endif /* DWC_DEVICE_ONLY */ diff --git a/drivers/usb/gadget/dwc_otg/sdiff/dwc_otg_hcd_queue.c.sdiff b/drivers/usb/gadget/dwc_otg/sdiff/dwc_otg_hcd_queue.c.sdiff new file mode 100644 index 00000000000..07cd43261b6 --- /dev/null +++ b/drivers/usb/gadget/dwc_otg/sdiff/dwc_otg_hcd_queue.c.sdiff @@ -0,0 +1,821 @@ +/* ========================================================== /* ========================================================== + * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers + * $Revision: #4 $ * $Revision: #4 $ + * $Date: 2005/09/15 $ * $Date: 2005/09/15 $ + * $Change: 537387 $ * $Change: 537387 $ + * * + * Synopsys HS OTG Linux Software Driver and documentation (h * Synopsys HS OTG Linux Software Driver and documentation (h + * "Software") is an Unsupported proprietary work of Synopsys * "Software") is an Unsupported proprietary work of Synopsys + * otherwise expressly agreed to in writing between Synopsys * otherwise expressly agreed to in writing between Synopsys + * * + * The Software IS NOT an item of Licensed Software or Licens * The Software IS NOT an item of Licensed Software or Licens + * any End User Software License Agreement or Agreement for L * any End User Software License Agreement or Agreement for L + * with Synopsys or any supplement thereto. You are permitted * with Synopsys or any supplement thereto. You are permitted + * redistribute this Software in source and binary forms, wit * redistribute this Software in source and binary forms, wit + * modification, provided that redistributions of source code * modification, provided that redistributions of source code + * notice. You may not view, use, disclose, copy or distribut * notice. You may not view, use, disclose, copy or distribut + * any information contained herein except pursuant to this l * any information contained herein except pursuant to this l + * Synopsys. If you do not agree with this notice, including * Synopsys. If you do not agree with this notice, including + * below, then you are not authorized to use the Software. * below, then you are not authorized to use the Software. + * * + * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON A * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON A + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PA * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PA + * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABL * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABL + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTER * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARI * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARI + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE PO * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE PO + * DAMAGE. * DAMAGE. + * ========================================================== * ========================================================== + +#ifndef CONFIG_DWC_DEVICE_ONLY #ifndef CONFIG_DWC_DEVICE_ONLY + +/** /** + * @file * @file + * * + * This file contains the functions to manage Queue Heads and * This file contains the functions to manage Queue Heads and + * Transfer Descriptors. * Transfer Descriptors. + */ */ +#include <linux/kernel.h> #include <linux/kernel.h> +#include <linux/module.h> #include <linux/module.h> +#include <linux/moduleparam.h> #include <linux/moduleparam.h> +#include <linux/init.h> #include <linux/init.h> +#include <linux/device.h> #include <linux/device.h> +#include <linux/errno.h> #include <linux/errno.h> +#include <linux/list.h> #include <linux/list.h> +#include <linux/interrupt.h> #include <linux/interrupt.h> +#include <linux/string.h> #include <linux/string.h> + +#include "dwc_otg_driver.h" #include "dwc_otg_driver.h" +#include "dwc_otg_hcd.h" #include "dwc_otg_hcd.h" +#include "dwc_otg_regs.h" #include "dwc_otg_regs.h" + +/** /** + * This function allocates and initializes a QH. * This function allocates and initializes a QH. + * * + * @param _hcd The HCD state structure for the DWC OTG contro * @param _hcd The HCD state structure for the DWC OTG contro + * @param[in] _urb Holds the information about the device/end * @param[in] _urb Holds the information about the device/end + * to initialize the QH. * to initialize the QH. + * * + * @return Returns pointer to the newly allocated QH, or NULL * @return Returns pointer to the newly allocated QH, or NULL +dwc_otg_qh_t * dwc_otg_hcd_qh_create(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * dwc_otg_hcd_qh_create(dwc_otg_hcd_t * _hcd, + struct urb * _urb) struct urb * _urb) +{ { + dwc_otg_qh_t * qh; dwc_otg_qh_t * qh; + + /* Allocate memory */ /* Allocate memory */ + /** @todo add memflags argument */ /** @todo add memflags argument */ + qh = dwc_otg_hcd_qh_alloc(); qh = dwc_otg_hcd_qh_alloc(); + if (qh == NULL) { if (qh == NULL) { + return NULL; return NULL; + } } + dwc_otg_hcd_qh_init(_hcd, qh, _urb); dwc_otg_hcd_qh_init(_hcd, qh, _urb); + return qh; return qh; +} } + +/** Free each QTD in the QH's QTD-list then free the QH. QH /** Free each QTD in the QH's QTD-list then free the QH. QH + * removed from a list. QTD list should already be empty if * removed from a list. QTD list should already be empty if + * Dequeue. * Dequeue. + * * + * @param[in] _qh The QH to free. * @param[in] _qh The QH to free. + */ */ +void dwc_otg_hcd_qh_free(dwc_otg_qh_t * _qh) void dwc_otg_hcd_qh_free(dwc_otg_qh_t * _qh) +{ { + dwc_otg_qtd_t * qtd; dwc_otg_qtd_t * qtd; + struct list_head *pos; struct list_head *pos; + unsigned long flags; unsigned long flags; + + /* Free each QTD in the QTD list */ /* Free each QTD in the QTD list */ + local_irq_save(flags); local_irq_save(flags); + for (pos = _qh->qtd_list.next; pos != &_qh->qtd_list; for (pos = _qh->qtd_list.next; pos != &_qh->qtd_list; + pos = _qh->qtd_list.next) { pos = _qh->qtd_list.next) { + list_del(pos); list_del(pos); + qtd = dwc_list_to_qtd(pos); qtd = dwc_list_to_qtd(pos); + dwc_otg_hcd_qtd_free(qtd); dwc_otg_hcd_qtd_free(qtd); + } } + local_irq_restore(flags); local_irq_restore(flags); + kfree(_qh); kfree(_qh); + return; return; +} } + +/** Initializes a QH structure. /** Initializes a QH structure. + * * + * @param[in] _hcd The HCD state structure for the DWC OTG co * @param[in] _hcd The HCD state structure for the DWC OTG co + * @param[in] _qh The QH to init. * @param[in] _qh The QH to init. + * @param[in] _urb Holds the information about the device/end * @param[in] _urb Holds the information about the device/end + * to initialize the QH. */ * to initialize the QH. */ +#define SCHEDULE_SLOP 10 #define SCHEDULE_SLOP 10 +void dwc_otg_hcd_qh_init(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * void dwc_otg_hcd_qh_init(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * + struct urb *_urb) struct urb *_urb) +{ { + memset(_qh, 0, sizeof(dwc_otg_qh_t)); memset(_qh, 0, sizeof(dwc_otg_qh_t)); + + /* Initialize QH */ /* Initialize QH */ + switch (usb_pipetype(_urb->pipe)) { switch (usb_pipetype(_urb->pipe)) { + case PIPE_CONTROL: case PIPE_CONTROL: + _qh->ep_type = USB_ENDPOINT_XFER_CONTROL; _qh->ep_type = USB_ENDPOINT_XFER_CONTROL; + break; break; + case PIPE_BULK: case PIPE_BULK: + _qh->ep_type = USB_ENDPOINT_XFER_BULK; _qh->ep_type = USB_ENDPOINT_XFER_BULK; + break; break; + case PIPE_ISOCHRONOUS: case PIPE_ISOCHRONOUS: + _qh->ep_type = USB_ENDPOINT_XFER_ISOC; _qh->ep_type = USB_ENDPOINT_XFER_ISOC; + break; break; + case PIPE_INTERRUPT: case PIPE_INTERRUPT: + _qh->ep_type = USB_ENDPOINT_XFER_INT; _qh->ep_type = USB_ENDPOINT_XFER_INT; + break; break; + } } + _qh->ep_is_in = usb_pipein(_urb->pipe) ? 1 : 0; _qh->ep_is_in = usb_pipein(_urb->pipe) ? 1 : 0; + _qh->data_toggle = DWC_OTG_HC_PID_DATA0; _qh->data_toggle = DWC_OTG_HC_PID_DATA0; + _qh->maxp = usb_maxpacket(_urb->dev, _urb->pipe, !(us _qh->maxp = usb_maxpacket(_urb->dev, _urb->pipe, !(us + INIT_LIST_HEAD(&_qh->qtd_list); INIT_LIST_HEAD(&_qh->qtd_list); + INIT_LIST_HEAD(&_qh->qh_list_entry); INIT_LIST_HEAD(&_qh->qh_list_entry); + _qh->channel = NULL; _qh->channel = NULL; + + /* FS/LS Enpoint on HS Hub /* FS/LS Enpoint on HS Hub + * NOT virtual root hub */ * NOT virtual root hub */ + _qh->do_split = 0; _qh->do_split = 0; + _qh->speed = _urb->dev->speed; < + < + if (((_urb->dev->speed == USB_SPEED_LOW) || if (((_urb->dev->speed == USB_SPEED_LOW) || + (_urb->dev->speed == USB_SPEED_FULL)) && (_urb->dev->speed == USB_SPEED_FULL)) && + (_urb->dev->tt) && (_urb->dev->tt->hub) && (_ (_urb->dev->tt) && (_urb->dev->tt->hub) && (_ + DWC_DEBUGPL(DBG_HCD, "QH init: EP %d: TT foun DWC_DEBUGPL(DBG_HCD, "QH init: EP %d: TT foun + usb_pipeendpoint(_urb->pipe), _urb->dev- usb_pipeendpoint(_urb->pipe), _urb->dev- + _qh->do_split = 1; _qh->do_split = 1; + } } + if (_qh->ep_type == USB_ENDPOINT_XFER_INT if (_qh->ep_type == USB_ENDPOINT_XFER_INT + || _qh->ep_type == USB_ENDPOINT_XFER_ISOC) { || _qh->ep_type == USB_ENDPOINT_XFER_ISOC) { + + /* Compute scheduling parameters once and sav /* Compute scheduling parameters once and sav + hprt0_data_t hprt; hprt0_data_t hprt; + + /** @todo Account for split transfers in the /** @todo Account for split transfers in the + int bytecount = dwc_hb_mult(_qh->maxp) * dwc_ int bytecount = dwc_hb_mult(_qh->maxp) * dwc_ + _qh->usecs = NS_TO_US(usb_calc_bus_time(_urb- _qh->usecs = NS_TO_US(usb_calc_bus_time(_urb- + usb_p usb_p + (_qh->ep_type == USB_ (_qh->ep_type == USB_ + + /* Start in a slightly future (micro)frame. * /* Start in a slightly future (micro)frame. * + _qh->sched_frame = dwc_frame_num_inc(_hcd->fr _qh->sched_frame = dwc_frame_num_inc(_hcd->fr + _qh->interval = _urb->interval; _qh->interval = _urb->interval; + +#if 0 #if 0 + /* Increase interrupt polling rate for de /* Increase interrupt polling rate for de + if (_qh->ep_type == USB_ENDPOINT_XFER_INT if (_qh->ep_type == USB_ENDPOINT_XFER_INT + _qh->interval = 8; _qh->interval = 8; + } } + +#endif /* */ #endif /* */ + hprt.d32 = dwc_read_reg32(_hcd->core_if->host_if- hprt.d32 = dwc_read_reg32(_hcd->core_if->host_if- + if ((hprt.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_S if ((hprt.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_S + ((_urb->dev->speed == USB_SPEED_LOW) ((_urb->dev->speed == USB_SPEED_LOW) + (_urb->dev->speed == USB_SPEED_FULL)) (_urb->dev->speed == USB_SPEED_FULL)) + _qh->interval *= 8; _qh->interval *= 8; + _qh->sched_frame |= 0x7; _qh->sched_frame |= 0x7; + _qh->start_split_frame = _qh->sched_f _qh->start_split_frame = _qh->sched_f + } } + } } + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD QH Initialized\n"); DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD QH Initialized\n"); + DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - qh = %p\n", DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - qh = %p\n", + DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Device Addre DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Device Addre + _urb->dev->devnum); _urb->dev->devnum); + DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Endpoint %d, DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Endpoint %d, + usb_pipeendpoint(_urb->pipe), usb_pipeendpoint(_urb->pipe), + usb_pipein(_urb->pipe) == USB_DIR_IN ? "I usb_pipein(_urb->pipe) == USB_DIR_IN ? "I + DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Speed = %s\n DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Speed = %s\n + char *speed; char *speed; + switch(_urb->dev->speed) { switch(_urb->dev->speed) { + case USB_SPEED_LOW: case USB_SPEED_LOW: + speed = "low"; break; speed = "low"; break; + case USB_SPEED_FULL: case USB_SPEED_FULL: + speed = "full"; break; speed = "full"; break; + case USB_SPEED_HIGH: case USB_SPEED_HIGH: + speed = "high"; break; speed = "high"; break; + default: default: + speed = "?"; speed = "?"; + break; break; + }; }; + speed; speed; + } )) ; } )) ; + DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Type = %s\n" DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Type = %s\n" + char *type; char *type; + switch (_qh->ep_type) { switch (_qh->ep_type) { + case USB_ENDPOINT_XFER_ISOC: case USB_ENDPOINT_XFER_ISOC: + type = "isochronous"; break; type = "isochronous"; break; + case USB_ENDPOINT_XFER_INT: case USB_ENDPOINT_XFER_INT: + type = "interrupt"; break; type = "interrupt"; break; + case USB_ENDPOINT_XFER_CONTROL: case USB_ENDPOINT_XFER_CONTROL: + type = "control"; break; type = "control"; break; + case USB_ENDPOINT_XFER_BULK: case USB_ENDPOINT_XFER_BULK: + type = "bulk"; break; type = "bulk"; break; + default: default: + type = "?";break; type = "?";break; + }; }; + type; type; + } )) ; } )) ; + +#ifdef CONFIG_DWC_DEBUG #ifdef CONFIG_DWC_DEBUG + if (_qh->ep_type == USB_ENDPOINT_XFER_INT) { if (_qh->ep_type == USB_ENDPOINT_XFER_INT) { + DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - usecs DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - usecs + _qh->usecs); _qh->usecs); + DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - inter DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - inter + _qh->interval); _qh->interval); + } } + +#endif /* */ #endif /* */ + return; return; +} } + +/** /** + * Microframe scheduler | * Checks that a channel is available for a periodic transfer + * track the total use in hcd->frame_usecs | * + * keep each qh use in qh->frame_usecs | * @return 0 if successful, negative error code otherise. + * when surrendering the qh then donate the time back < + */ < +const unsigned short max_uframe_usecs[]={ 100, 100, 100, 100, < + < +/* < + * called from dwc_otg_hcd.c:dwc_otg_hcd_init < + */ */ +int init_hcd_usecs(dwc_otg_hcd_t *_hcd) | static int periodic_channel_available(dwc_otg_hcd_t * _hcd) +{ < + int i; < + for (i=0; i<8; i++) { < + _hcd->frame_usecs[i] = max_uframe_usecs[i]; < + } < + return 0; < +} < + < +static int find_single_uframe(dwc_otg_hcd_t * _hcd, dwc_otg_q < +{ { + int i; | /* + unsigned short utime; | * Currently assuming that there is a dedicated host + int t_left; | * periodic transaction plus at least one host channe + int ret; | * non-periodic transactions. + int done; | */ + | int status; + ret = -1; | int num_channels; + utime = _qh->usecs; | num_channels = _hcd->core_if->core_params->host_chann + t_left = utime; | if ((_hcd->periodic_channels + _hcd->non_periodic_cha + i = 0; | num_channels) && (_hcd->periodic_channels < num + done = 0; | status = 0; + while (done == 0) { | } else { + /* At the start _hcd->frame_usecs[i] = max_uf | DWC_NOTICE("%s: Total channels: %d, Periodic: + if (utime <= _hcd->frame_usecs[i]) { | __func__, num_channels, _hcd->periodic_c + _hcd->frame_usecs[i] -= utime; | _hcd->non_periodic_channels); + _qh->frame_usecs[i] += utime; | status = -ENOSPC; + t_left -= utime; < + ret = i; < + done = 1; < + return ret; < + } else { < + i++; < + if (i == 8) { < + done = 1; < + ret = -1; < + } < + } < + } } + return ret; | return status; +} } + +/* | /** + * use this for FS apps that can span multiple uframes | * Checks that there is sufficient bandwidth for the specifie + > * periodic schedule. For simplicity, this calculation assume + > * transfers in the periodic schedule may occur in the same ( + > * + > * @param _hcd The HCD state structure for the DWC OTG contro + > * @param _qh QH containing periodic bandwidth required. + > * + > * @return 0 if successful, negative error code otherwise. + */ */ +static int find_multi_uframe(dwc_otg_hcd_t * _hcd, dwc_otg_qh | static int check_periodic_bandwidth(dwc_otg_hcd_t * _hcd, dwc +{ { + int i; | int status; + int j; | uint16_t max_claimed_usecs; + unsigned short utime; | status = 0; + int t_left; | if (_hcd->core_if->core_params->speed == DWC_SPEED_PA + int ret; < + int done; < + unsigned short xtime; < + < + ret = -1; < + utime = _qh->usecs; < + t_left = utime; < + i = 0; < + done = 0; < +loop: < + while (done == 0) { < + if(_hcd->frame_usecs[i] <= 0) { < + i++; < + if (i == 8) { < + done = 1; < + ret = -1; < + } < + goto loop; < + } < + < + /* /* + * we need n consequtive slots | * High speed mode. + * so use j as a start slot j plus j+1 must b | * Max periodic usecs is 80% x 125 usec = 100 + */ */ + xtime= _hcd->frame_usecs[i]; | max_claimed_usecs = 100 - _qh->usecs; + for (j = i+1 ; j < 8 ; j++ ) { < + /* < + * if we add this frame remaining tim < + * be OK, if not we need to test j fo < + */ < + if ((xtime+_hcd->frame_usecs[j]) < ut < + if (_hcd->frame_usecs[j] < ma < + j = 8; < + ret = -1; < + continue; < + } < + } < + if (xtime >= utime) { < + ret = i; < + j = 8; /* stop loop with a g < + continue; < + } < + /* add the frame time to x time */ < + xtime += _hcd->frame_usecs[j]; < + /* we must have a fully available nex < + if ((xtime < utime) < + && (_hcd->frame_usecs[j] == max_u < + ret = -1; < + j = 8; /* stop loop with a b < + continue; < + } < + } < + if (ret >= 0) { < + t_left = utime; < + for (j = i; (t_left>0) && (j < 8); j+ < + t_left -= _hcd->frame_usecs[j < + if ( t_left <= 0 ) { < + _qh->frame_usecs[j] + < + _hcd->frame_usecs[j]= < + ret = i; < + done = 1; < + } else { < + _qh->frame_usecs[j] + < + _hcd->frame_usecs[j] < + } < + } < + } else { < + i++; < + if (i == 8) { < + done = 1; < + ret = -1; < + } < + } < + } < + return ret; < +} < + < +static int find_uframe(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _ < +{ < + int ret; < + ret = -1; < + < + if (_qh->speed == USB_SPEED_HIGH) { < + /* if this is a hs transaction we need a full < + ret = find_single_uframe(_hcd, _qh); < + } else { } else { + /* if this is a fs transaction we may need a | /* + ret = find_multi_uframe(_hcd, _qh); | * Full speed mode. + > * Max periodic usecs is 90% x 1000 usec = 90 + > */ + > max_claimed_usecs = 900 - _qh->usecs; + } } + return ret; | if (_hcd->periodic_usecs > max_claimed_usecs) { + > #undef USB_DWC_OTG_IGNORE_BANDWIDTH + > #ifndef USB_DWC_OTG_IGNORE_BANDWIDTH + > DWC_NOTICE("%s: already claimed usecs %d, req + > __func__, _hcd->periodic_usecs, _ + > status = -ENOSPC; + > #else + > status = 0; + > #endif + > } + > return status; +} } + +/** /** + * Checks that the max transfer size allowed in a host channe * Checks that the max transfer size allowed in a host channe + * to handle the maximum data transfer in a single (micro)fra * to handle the maximum data transfer in a single (micro)fra + * transfer. * transfer. + * * + * @param _hcd The HCD state structure for the DWC OTG contro * @param _hcd The HCD state structure for the DWC OTG contro + * @param _qh QH for a periodic endpoint. * @param _qh QH for a periodic endpoint. + * * + * @return 0 if successful, negative error code otherwise. * @return 0 if successful, negative error code otherwise. + */ */ +static int check_max_xfer_size(dwc_otg_hcd_t * _hcd, dwc_otg_ static int check_max_xfer_size(dwc_otg_hcd_t * _hcd, dwc_otg_ +{ { + int status; int status; + uint32_t max_xfer_size; uint32_t max_xfer_size; + uint32_t max_channel_xfer_size; uint32_t max_channel_xfer_size; + status = 0; status = 0; + max_xfer_size = dwc_max_packet(_qh->maxp) * dwc_hb_mu max_xfer_size = dwc_max_packet(_qh->maxp) * dwc_hb_mu + max_channel_xfer_size = _hcd->core_if->core_params->m max_channel_xfer_size = _hcd->core_if->core_params->m + if (max_xfer_size > max_channel_xfer_size) { if (max_xfer_size > max_channel_xfer_size) { + DWC_NOTICE("%s: Periodic xfer length %d > " DWC_NOTICE("%s: Periodic xfer length %d > " + "max xfer length for channel %d\n "max xfer length for channel %d\n + max_xfer_size, max_channel_xfer_s max_xfer_size, max_channel_xfer_s + status = -ENOSPC; status = -ENOSPC; + } } + return status; return status; +} } + +/** /** + * Schedules an interrupt or isochronous transfer in the peri * Schedules an interrupt or isochronous transfer in the peri + * * + * @param _hcd The HCD state structure for the DWC OTG contro * @param _hcd The HCD state structure for the DWC OTG contro + * @param _qh QH for the periodic transfer. The QH should alr * @param _qh QH for the periodic transfer. The QH should alr + * scheduling information. * scheduling information. + * * + * @return 0 if successful, negative error code otherwise. * @return 0 if successful, negative error code otherwise. + */ */ +static int schedule_periodic(dwc_otg_hcd_t * _hcd, dwc_otg_qh static int schedule_periodic(dwc_otg_hcd_t * _hcd, dwc_otg_qh +{ { + int status = 0; int status = 0; + int frame; | status = periodic_channel_available(_hcd); + status = find_uframe(_hcd, _qh); | if (status) { + frame = -1; | DWC_NOTICE("%s: No host channel available for + if (status == 0) { | "transfer.\n", __func__); + frame = 7; | return status; + } else { < + if (status > 0 ) < + frame = status-1; < + } < + /* Set the new frame up */ < + if (frame > -1) { < + _qh->sched_frame &= ~0x7; < + _qh->sched_frame |= (frame & 7); < + } } + | status = check_periodic_bandwidth(_hcd, _qh); + if (status != -1 ) < + status = 0; < + < + if (status) { if (status) { + DWC_NOTICE("%s: Insufficient periodic bandwid DWC_NOTICE("%s: Insufficient periodic bandwid + "periodic transfer.\n", __func__) "periodic transfer.\n", __func__) + return status; return status; + } } + status = check_max_xfer_size(_hcd, _qh); status = check_max_xfer_size(_hcd, _qh); + if (status) { if (status) { + DWC_NOTICE("%s: Channel max transfer size too DWC_NOTICE("%s: Channel max transfer size too + "for periodic transfer.\n", __fun "for periodic transfer.\n", __fun + return status; return status; + } } + + /* Always start in the inactive schedule. */ /* Always start in the inactive schedule. */ + list_add_tail(&_qh->qh_list_entry, &_hcd->periodic_sc list_add_tail(&_qh->qh_list_entry, &_hcd->periodic_sc + + > /* Reserve the periodic channel. */ + > _hcd->periodic_channels++; + > + /* Update claimed usecs per (micro)frame. */ /* Update claimed usecs per (micro)frame. */ + _hcd->periodic_usecs += _qh->usecs; _hcd->periodic_usecs += _qh->usecs; + + /* Update average periodic bandwidth claimed and # pe /* Update average periodic bandwidth claimed and # pe + hcd_to_bus(dwc_otg_hcd_to_hcd(_hcd))->bandwidth_alloc hcd_to_bus(dwc_otg_hcd_to_hcd(_hcd))->bandwidth_alloc + _qh->usecs / _qh->usecs / + + if (_qh->ep_type == USB_ENDPOINT_XFER_INT) { if (_qh->ep_type == USB_ENDPOINT_XFER_INT) { + hcd_to_bus(dwc_otg_hcd_to_hcd(_hcd))->bandwid hcd_to_bus(dwc_otg_hcd_to_hcd(_hcd))->bandwid + DWC_DEBUGPL(DBG_HCD, DWC_DEBUGPL(DBG_HCD, + "Scheduled intr: qh %p, usecs %d "Scheduled intr: qh %p, usecs %d + _qh, _qh->usecs, _qh->interval); _qh, _qh->usecs, _qh->interval); + } else { } else { + hcd_to_bus(dwc_otg_hcd_to_hcd(_hcd))->bandwid hcd_to_bus(dwc_otg_hcd_to_hcd(_hcd))->bandwid + DWC_DEBUGPL(DBG_HCD, DWC_DEBUGPL(DBG_HCD, + "Scheduled isoc: qh %p, usecs %d "Scheduled isoc: qh %p, usecs %d + _qh, _qh->usecs, _qh->interval); _qh, _qh->usecs, _qh->interval); + } } + return status; return status; +} } + +/** /** + * This function adds a QH to either the non periodic or peri * This function adds a QH to either the non periodic or peri + * it is not already in the schedule. If the QH is already in * it is not already in the schedule. If the QH is already in + * action is taken. * action is taken. + * * + * @return 0 if successful, negative error code otherwise. * @return 0 if successful, negative error code otherwise. + */ */ +int dwc_otg_hcd_qh_add(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _ int dwc_otg_hcd_qh_add(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _ +{ { + unsigned long flags; unsigned long flags; + int status = 0; int status = 0; + local_irq_save(flags); local_irq_save(flags); + if (!list_empty(&_qh->qh_list_entry)) { if (!list_empty(&_qh->qh_list_entry)) { + /* QH already in a schedule. */ /* QH already in a schedule. */ + goto done; goto done; + } } + + /* Add the new QH to the appropriate schedule */ /* Add the new QH to the appropriate schedule */ + if (dwc_qh_is_non_per(_qh)) { if (dwc_qh_is_non_per(_qh)) { + /* Always start in the inactive schedule. */ /* Always start in the inactive schedule. */ + list_add_tail(&_qh->qh_list_entry, list_add_tail(&_qh->qh_list_entry, + &_hcd->non_periodic_sched_i &_hcd->non_periodic_sched_i + } else { } else { + status = schedule_periodic(_hcd, _qh); status = schedule_periodic(_hcd, _qh); + } } + +done:local_irq_restore(flags); done:local_irq_restore(flags); + return status; return status; +} } +/** /** + * This function adds a QH to the non periodic deferred sched * This function adds a QH to the non periodic deferred sched + * * + * @return 0 if successful, negative error code otherwise. * @return 0 if successful, negative error code otherwise. + */ */ +int dwc_otg_hcd_qh_add_deferred(dwc_otg_hcd_t * _hcd, dwc_otg int dwc_otg_hcd_qh_add_deferred(dwc_otg_hcd_t * _hcd, dwc_otg +{ { + unsigned long flags; unsigned long flags; + local_irq_save(flags); local_irq_save(flags); + if (!list_empty(&_qh->qh_list_entry)) { if (!list_empty(&_qh->qh_list_entry)) { + /* QH already in a schedule. */ /* QH already in a schedule. */ + goto done; goto done; + } } + + /* Add the new QH to the non periodic deferred schedu /* Add the new QH to the non periodic deferred schedu + if (dwc_qh_is_non_per(_qh)) { if (dwc_qh_is_non_per(_qh)) { + list_add_tail(&_qh->qh_list_entry, list_add_tail(&_qh->qh_list_entry, + &_hcd->non_periodic_sched_defer &_hcd->non_periodic_sched_defer + } } +done: done: + local_irq_restore(flags); local_irq_restore(flags); + return 0; return 0; +} } + +/** /** + * Removes an interrupt or isochronous transfer from the peri * Removes an interrupt or isochronous transfer from the peri + * * + * @param _hcd The HCD state structure for the DWC OTG contro * @param _hcd The HCD state structure for the DWC OTG contro + * @param _qh QH for the periodic transfer. * @param _qh QH for the periodic transfer. + */ */ +static void deschedule_periodic(dwc_otg_hcd_t * _hcd, dwc_otg static void deschedule_periodic(dwc_otg_hcd_t * _hcd, dwc_otg +{ { + int i; < + list_del_init(&_qh->qh_list_entry); list_del_init(&_qh->qh_list_entry); + + > /* Release the periodic channel reservation. */ + > _hcd->periodic_channels--; + > + /* Update claimed usecs per (micro)frame. */ /* Update claimed usecs per (micro)frame. */ + _hcd->periodic_usecs -= _qh->usecs; _hcd->periodic_usecs -= _qh->usecs; + + for (i = 0; i < 8; i++) { < + _hcd->frame_usecs[i] += _qh->frame_usecs[i]; < + _qh->frame_usecs[i] = 0; < + } < + < + /* Update average periodic bandwidth claimed and # pe /* Update average periodic bandwidth claimed and # pe + hcd_to_bus(dwc_otg_hcd_to_hcd(_hcd))->bandwidth_alloc hcd_to_bus(dwc_otg_hcd_to_hcd(_hcd))->bandwidth_alloc + _qh->usecs / _qh->int _qh->usecs / _qh->int + + if (_qh->ep_type == USB_ENDPOINT_XFER_INT) { if (_qh->ep_type == USB_ENDPOINT_XFER_INT) { + hcd_to_bus(dwc_otg_hcd_to_hcd(_hcd))->bandwid hcd_to_bus(dwc_otg_hcd_to_hcd(_hcd))->bandwid + DWC_DEBUGPL(DBG_HCD, DWC_DEBUGPL(DBG_HCD, + "Descheduled intr: qh %p, usecs "Descheduled intr: qh %p, usecs + _qh, _qh->usecs, _qh->interval); _qh, _qh->usecs, _qh->interval); + } else { } else { + hcd_to_bus(dwc_otg_hcd_to_hcd(_hcd))->bandwid hcd_to_bus(dwc_otg_hcd_to_hcd(_hcd))->bandwid + DWC_DEBUGPL(DBG_HCD, DWC_DEBUGPL(DBG_HCD, + "Descheduled isoc: qh %p, usecs "Descheduled isoc: qh %p, usecs + _qh, _qh->usecs, _qh->interval); _qh, _qh->usecs, _qh->interval); + } } +} } + +/** /** + * Removes a QH from either the non-periodic or periodic sche * Removes a QH from either the non-periodic or periodic sche + * not freed. * not freed. + * * + * @param[in] _hcd The HCD state structure. * @param[in] _hcd The HCD state structure. + * @param[in] _qh QH to remove from schedule. */ * @param[in] _qh QH to remove from schedule. */ +void dwc_otg_hcd_qh_remove(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t void dwc_otg_hcd_qh_remove(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t +{ { + unsigned long flags; unsigned long flags; + local_irq_save(flags); local_irq_save(flags); + if (list_empty(&_qh->qh_list_entry)) { if (list_empty(&_qh->qh_list_entry)) { + /* QH is not in a schedule. */ /* QH is not in a schedule. */ + goto done; goto done; + } } + if (dwc_qh_is_non_per(_qh)) { if (dwc_qh_is_non_per(_qh)) { + if (_hcd->non_periodic_qh_ptr == &_qh->qh_lis if (_hcd->non_periodic_qh_ptr == &_qh->qh_lis + _hcd->non_periodic_qh_ptr = _hcd->non _hcd->non_periodic_qh_ptr = _hcd->non + } } + list_del_init(&_qh->qh_list_entry); list_del_init(&_qh->qh_list_entry); + } else { } else { + deschedule_periodic(_hcd, _qh); deschedule_periodic(_hcd, _qh); + } } + +done:local_irq_restore(flags); done:local_irq_restore(flags); +} } + +/** /** + * Defers a QH. For non-periodic QHs, removes the QH from the * Defers a QH. For non-periodic QHs, removes the QH from the + * non-periodic schedule. The QH is added to the deferred non * non-periodic schedule. The QH is added to the deferred non + * schedule if any QTDs are still attached to the QH. * schedule if any QTDs are still attached to the QH. + */ */ +int dwc_otg_hcd_qh_deferr(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t int dwc_otg_hcd_qh_deferr(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t +{ { + int deact = 1; int deact = 1; + unsigned long flags; unsigned long flags; + local_irq_save(flags); local_irq_save(flags); + if (dwc_qh_is_non_per(_qh)) { if (dwc_qh_is_non_per(_qh)) { + _qh->sched_frame = _qh->sched_frame = + dwc_frame_num_inc(_hcd->frame_number, dwc_frame_num_inc(_hcd->frame_number, + delay); delay); + _qh->channel = NULL; _qh->channel = NULL; + _qh->qtd_in_process = NULL; _qh->qtd_in_process = NULL; + deact = 0; deact = 0; + dwc_otg_hcd_qh_remove(_hcd, _qh); dwc_otg_hcd_qh_remove(_hcd, _qh); + if (!list_empty(&_qh->qtd_list)) { if (!list_empty(&_qh->qtd_list)) { + /* Add back to deferred non-periodic /* Add back to deferred non-periodic + dwc_otg_hcd_qh_add_deferred(_hcd, _qh dwc_otg_hcd_qh_add_deferred(_hcd, _qh + } } + } } + local_irq_restore(flags); local_irq_restore(flags); + return deact; return deact; +} } +/** /** + * Deactivates a QH. For non-periodic QHs, removes the QH fro * Deactivates a QH. For non-periodic QHs, removes the QH fro + * non-periodic schedule. The QH is added to the inactive non * non-periodic schedule. The QH is added to the inactive non + * schedule if any QTDs are still attached to the QH. * schedule if any QTDs are still attached to the QH. + * * + * For periodic QHs, the QH is removed from the periodic queu * For periodic QHs, the QH is removed from the periodic queu + * there are any QTDs still attached to the QH, the QH is add * there are any QTDs still attached to the QH, the QH is add + * periodic inactive schedule or the periodic ready schedule * periodic inactive schedule or the periodic ready schedule + * scheduled frame is calculated. The QH is placed in the rea * scheduled frame is calculated. The QH is placed in the rea + * the scheduled frame has been reached already. Otherwise it * the scheduled frame has been reached already. Otherwise it + * inactive schedule. If there are no QTDs attached to the QH * inactive schedule. If there are no QTDs attached to the QH + * completely removed from the periodic schedule. * completely removed from the periodic schedule. + */ */ +void dwc_otg_hcd_qh_deactivate(dwc_otg_hcd_t * _hcd, dwc_otg_ void dwc_otg_hcd_qh_deactivate(dwc_otg_hcd_t * _hcd, dwc_otg_ + int sched_next_periodic_split) int sched_next_periodic_split) +{ { + unsigned long flags; unsigned long flags; + local_irq_save(flags); local_irq_save(flags); + if (dwc_qh_is_non_per(_qh)) { if (dwc_qh_is_non_per(_qh)) { + dwc_otg_hcd_qh_remove(_hcd, _qh); dwc_otg_hcd_qh_remove(_hcd, _qh); + if (!list_empty(&_qh->qtd_list)) { if (!list_empty(&_qh->qtd_list)) { + /* Add back to inactive non-periodic /* Add back to inactive non-periodic + dwc_otg_hcd_qh_add(_hcd, _qh); dwc_otg_hcd_qh_add(_hcd, _qh); + } } + } else { } else { + uint16_t frame_number = uint16_t frame_number = + dwc_otg_hcd_get_frame_number(dwc_otg_hcd_ dwc_otg_hcd_get_frame_number(dwc_otg_hcd_ + if (_qh->do_split) { if (_qh->do_split) { + /* Schedule the next continuing perio /* Schedule the next continuing perio + if (sched_next_periodic_split) { if (sched_next_periodic_split) { + _qh->sched_frame = frame_numb _qh->sched_frame = frame_numb + if (dwc_frame_num_le(frame_nu if (dwc_frame_num_le(frame_nu + dwc_frame_num_inc(_qh dwc_frame_num_inc(_qh + /* /* + * Allow one frame to * Allow one frame to + * split microframe b * split microframe b + * complete split, bu * complete split, bu + * doing the next sta * doing the next sta + * same frame for an * same frame for an + */ */ + if ((_qh->ep_type != if ((_qh->ep_type != + || (_qh->ep_i || (_qh->ep_i + _qh->sched_fr _qh->sched_fr + } } + } } + } else { } else { + _qh->sched_frame = dwc_frame_ _qh->sched_frame = dwc_frame_ + _qh->in _qh->in + if (dwc_frame_num_le(_qh->sch if (dwc_frame_num_le(_qh->sch + _qh->sched_frame = fr _qh->sched_frame = fr + } } + _qh->sched_frame |= 0x7; _qh->sched_frame |= 0x7; + _qh->start_split_frame = _qh- _qh->start_split_frame = _qh- + } } + } else { } else { + _qh->sched_frame = _qh->sched_frame = + dwc_frame_num_inc(_qh->sched_fram dwc_frame_num_inc(_qh->sched_fram + if (dwc_frame_num_le(_qh->sched_frame if (dwc_frame_num_le(_qh->sched_frame + _qh->sched_frame = frame_numb _qh->sched_frame = frame_numb + } } + } } + if (list_empty(&_qh->qtd_list)) { if (list_empty(&_qh->qtd_list)) { + dwc_otg_hcd_qh_remove(_hcd, _qh); dwc_otg_hcd_qh_remove(_hcd, _qh); + } else { } else { + /* /* + * Remove from periodic_sched_queued * Remove from periodic_sched_queued + * appropriate queue. * appropriate queue. + */ */ + if (dwc_frame_num_le(_qh->sched_frame | if (_qh->sched_frame == frame_number) + list_move(&_qh->qh_list_entry list_move(&_qh->qh_list_entry + &_hcd->periodic_sc &_hcd->periodic_sc + } else { } else { + list_move(&_qh->qh_list_entry list_move(&_qh->qh_list_entry + &_hcd->periodic_sc &_hcd->periodic_sc + } } + } } + } } + local_irq_restore(flags); local_irq_restore(flags); +} } + +/** /** + * This function allocates and initializes a QTD. * This function allocates and initializes a QTD. + * * + * @param[in] _urb The URB to create a QTD from. Each URB-QT * @param[in] _urb The URB to create a QTD from. Each URB-QT + * pointing to each other so each pair should have a unique c * pointing to each other so each pair should have a unique c + * * + * @return Returns pointer to the newly allocated QTD, or NUL * @return Returns pointer to the newly allocated QTD, or NUL +dwc_otg_qtd_t * dwc_otg_hcd_qtd_create(struct urb *_urb) dwc_otg_qtd_t * dwc_otg_hcd_qtd_create(struct urb *_urb) +{ { + dwc_otg_qtd_t * qtd; dwc_otg_qtd_t * qtd; + qtd = dwc_otg_hcd_qtd_alloc(); qtd = dwc_otg_hcd_qtd_alloc(); + if (qtd == NULL) { if (qtd == NULL) { + return NULL; return NULL; + } } + dwc_otg_hcd_qtd_init(qtd, _urb); dwc_otg_hcd_qtd_init(qtd, _urb); + return qtd; return qtd; +} } + +/** /** + * Initializes a QTD structure. * Initializes a QTD structure. + * * + * @param[in] _qtd The QTD to initialize. * @param[in] _qtd The QTD to initialize. + * @param[in] _urb The URB to use for initialization. */ * @param[in] _urb The URB to use for initialization. */ +void dwc_otg_hcd_qtd_init(dwc_otg_qtd_t * _qtd, struct urb *_ void dwc_otg_hcd_qtd_init(dwc_otg_qtd_t * _qtd, struct urb *_ +{ { + memset(_qtd, 0, sizeof(dwc_otg_qtd_t)); memset(_qtd, 0, sizeof(dwc_otg_qtd_t)); + _qtd->urb = _urb; _qtd->urb = _urb; + if (usb_pipecontrol(_urb->pipe)) { if (usb_pipecontrol(_urb->pipe)) { + /* /* + * The only time the QTD data toggle is used * The only time the QTD data toggle is used + * phase of control transfers. This phase alw * phase of control transfers. This phase alw + * DATA1. * DATA1. + */ */ + _qtd->data_toggle = DWC_OTG_HC_PID_DATA1; _qtd->data_toggle = DWC_OTG_HC_PID_DATA1; + _qtd->control_phase = DWC_OTG_CONTROL_SETUP; _qtd->control_phase = DWC_OTG_CONTROL_SETUP; + } } + + /* start split */ /* start split */ + _qtd->complete_split = 0; _qtd->complete_split = 0; + _qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_ALL; _qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_ALL; + _qtd->isoc_split_offset = 0; _qtd->isoc_split_offset = 0; + + /* Store the qtd ptr in the urb to reference what QTD /* Store the qtd ptr in the urb to reference what QTD + _urb->hcpriv = _qtd; _urb->hcpriv = _qtd; + return; return; +} } + +/** /** + * This function adds a QTD to the QTD-list of a QH. It will * This function adds a QTD to the QTD-list of a QH. It will + * QH to place the QTD into. If it does not find a QH, then * QH to place the QTD into. If it does not find a QH, then + * new QH. If the QH to which the QTD is added is not current * new QH. If the QH to which the QTD is added is not current + * is placed into the proper schedule based on its EP type. * is placed into the proper schedule based on its EP type. + * * + * @param[in] _qtd The QTD to add * @param[in] _qtd The QTD to add + * @param[in] _dwc_otg_hcd The DWC HCD structure * @param[in] _dwc_otg_hcd The DWC HCD structure + * * + * @return 0 if successful, negative error code otherwise. * @return 0 if successful, negative error code otherwise. + */ */ +int dwc_otg_hcd_qtd_add(dwc_otg_qtd_t * _qtd, dwc_otg_hcd_t int dwc_otg_hcd_qtd_add(dwc_otg_qtd_t * _qtd, dwc_otg_hcd_t +{ { + struct usb_host_endpoint *ep; struct usb_host_endpoint *ep; + dwc_otg_qh_t * qh; dwc_otg_qh_t * qh; + unsigned long flags; unsigned long flags; + int retval = 0; int retval = 0; + struct urb *urb = _qtd->urb; struct urb *urb = _qtd->urb; + local_irq_save(flags); local_irq_save(flags); + + /* /* + * Get the QH which holds the QTD-list to insert to. * Get the QH which holds the QTD-list to insert to. + * doesn't exist. * doesn't exist. + */ */ + ep = dwc_urb_to_endpoint(urb); ep = dwc_urb_to_endpoint(urb); + qh = (dwc_otg_qh_t *) ep->hcpriv; qh = (dwc_otg_qh_t *) ep->hcpriv; + if (qh == NULL) { if (qh == NULL) { + qh = dwc_otg_hcd_qh_create(_dwc_otg_hcd, urb) qh = dwc_otg_hcd_qh_create(_dwc_otg_hcd, urb) + if (qh == NULL) { if (qh == NULL) { + retval = -1; retval = -1; + goto done; goto done; + } } + ep->hcpriv = qh; ep->hcpriv = qh; + } } + _qtd->qtd_qh_ptr = qh; _qtd->qtd_qh_ptr = qh; + retval = dwc_otg_hcd_qh_add(_dwc_otg_hcd, qh); retval = dwc_otg_hcd_qh_add(_dwc_otg_hcd, qh); + if (retval == 0) { if (retval == 0) { + list_add_tail(&_qtd->qtd_list_entry, &qh->qtd list_add_tail(&_qtd->qtd_list_entry, &qh->qtd + } } + +done: done: + local_irq_restore(flags); local_irq_restore(flags); + + return retval; return retval; +} } + + +#endif /* DWC_DEVICE_ONLY */ #endif /* DWC_DEVICE_ONLY */ |