aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/gadget/atmel_usba_udc.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/gadget/atmel_usba_udc.c')
-rw-r--r--drivers/usb/gadget/atmel_usba_udc.c10
1 files changed, 6 insertions, 4 deletions
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index 4e970cf0e29..75a256f3d45 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -12,6 +12,7 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <linux/list.h>
@@ -320,7 +321,7 @@ static inline void usba_cleanup_debugfs(struct usba_udc *udc)
static int vbus_is_present(struct usba_udc *udc)
{
if (gpio_is_valid(udc->vbus_pin))
- return gpio_get_value(udc->vbus_pin);
+ return gpio_get_value(udc->vbus_pin) ^ udc->vbus_pin_inverted;
/* No Vbus detection: Assume always present */
return 1;
@@ -1763,7 +1764,7 @@ static irqreturn_t usba_vbus_irq(int irq, void *devid)
if (!udc->driver)
goto out;
- vbus = gpio_get_value(udc->vbus_pin);
+ vbus = vbus_is_present(udc);
if (vbus != udc->vbus_prev) {
if (vbus) {
toggle_bias(1);
@@ -1914,14 +1915,14 @@ static int __init usba_udc_probe(struct platform_device *pdev)
udc->vbus_pin = -ENODEV;
ret = -ENOMEM;
- udc->regs = ioremap(regs->start, regs->end - regs->start + 1);
+ udc->regs = ioremap(regs->start, resource_size(regs));
if (!udc->regs) {
dev_err(&pdev->dev, "Unable to map I/O memory, aborting.\n");
goto err_map_regs;
}
dev_info(&pdev->dev, "MMIO registers at 0x%08lx mapped at %p\n",
(unsigned long)regs->start, udc->regs);
- udc->fifo = ioremap(fifo->start, fifo->end - fifo->start + 1);
+ udc->fifo = ioremap(fifo->start, resource_size(fifo));
if (!udc->fifo) {
dev_err(&pdev->dev, "Unable to map FIFO, aborting.\n");
goto err_map_fifo;
@@ -2000,6 +2001,7 @@ static int __init usba_udc_probe(struct platform_device *pdev)
if (gpio_is_valid(pdata->vbus_pin)) {
if (!gpio_request(pdata->vbus_pin, "atmel_usba_udc")) {
udc->vbus_pin = pdata->vbus_pin;
+ udc->vbus_pin_inverted = pdata->vbus_pin_inverted;
ret = request_irq(gpio_to_irq(udc->vbus_pin),
usba_vbus_irq, 0,