diff options
Diffstat (limited to 'drivers/usb/dwc3/core.c')
-rw-r--r-- | drivers/usb/dwc3/core.c | 251 |
1 files changed, 221 insertions, 30 deletions
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index a49217ae353..d001417e8e3 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -61,9 +61,10 @@ void dwc3_set_mode(struct dwc3 *dwc, u32 mode) * dwc3_core_soft_reset - Issues core soft reset and PHY reset * @dwc: pointer to our context structure */ -static void dwc3_core_soft_reset(struct dwc3 *dwc) +static int dwc3_core_soft_reset(struct dwc3 *dwc) { u32 reg; + int ret; /* Before Resetting PHY, put Core in Reset */ reg = dwc3_readl(dwc->regs, DWC3_GCTL); @@ -82,6 +83,15 @@ static void dwc3_core_soft_reset(struct dwc3 *dwc) usb_phy_init(dwc->usb2_phy); usb_phy_init(dwc->usb3_phy); + ret = phy_init(dwc->usb2_generic_phy); + if (ret < 0) + return ret; + + ret = phy_init(dwc->usb3_generic_phy); + if (ret < 0) { + phy_exit(dwc->usb2_generic_phy); + return ret; + } mdelay(100); /* Clear USB3 PHY reset */ @@ -100,6 +110,8 @@ static void dwc3_core_soft_reset(struct dwc3 *dwc) reg = dwc3_readl(dwc->regs, DWC3_GCTL); reg &= ~DWC3_GCTL_CORESOFTRESET; dwc3_writel(dwc->regs, DWC3_GCTL, reg); + + return 0; } /** @@ -242,6 +254,90 @@ static void dwc3_event_buffers_cleanup(struct dwc3 *dwc) } } +static int dwc3_alloc_scratch_buffers(struct dwc3 *dwc) +{ + if (!dwc->has_hibernation) + return 0; + + if (!dwc->nr_scratch) + return 0; + + dwc->scratchbuf = kmalloc_array(dwc->nr_scratch, + DWC3_SCRATCHBUF_SIZE, GFP_KERNEL); + if (!dwc->scratchbuf) + return -ENOMEM; + + return 0; +} + +static int dwc3_setup_scratch_buffers(struct dwc3 *dwc) +{ + dma_addr_t scratch_addr; + u32 param; + int ret; + + if (!dwc->has_hibernation) + return 0; + + if (!dwc->nr_scratch) + return 0; + + /* should never fall here */ + if (!WARN_ON(dwc->scratchbuf)) + return 0; + + scratch_addr = dma_map_single(dwc->dev, dwc->scratchbuf, + dwc->nr_scratch * DWC3_SCRATCHBUF_SIZE, + DMA_BIDIRECTIONAL); + if (dma_mapping_error(dwc->dev, scratch_addr)) { + dev_err(dwc->dev, "failed to map scratch buffer\n"); + ret = -EFAULT; + goto err0; + } + + dwc->scratch_addr = scratch_addr; + + param = lower_32_bits(scratch_addr); + + ret = dwc3_send_gadget_generic_command(dwc, + DWC3_DGCMD_SET_SCRATCHPAD_ADDR_LO, param); + if (ret < 0) + goto err1; + + param = upper_32_bits(scratch_addr); + + ret = dwc3_send_gadget_generic_command(dwc, + DWC3_DGCMD_SET_SCRATCHPAD_ADDR_HI, param); + if (ret < 0) + goto err1; + + return 0; + +err1: + dma_unmap_single(dwc->dev, dwc->scratch_addr, dwc->nr_scratch * + DWC3_SCRATCHBUF_SIZE, DMA_BIDIRECTIONAL); + +err0: + return ret; +} + +static void dwc3_free_scratch_buffers(struct dwc3 *dwc) +{ + if (!dwc->has_hibernation) + return; + + if (!dwc->nr_scratch) + return; + + /* should never fall here */ + if (!WARN_ON(dwc->scratchbuf)) + return; + + dma_unmap_single(dwc->dev, dwc->scratch_addr, dwc->nr_scratch * + DWC3_SCRATCHBUF_SIZE, DMA_BIDIRECTIONAL); + kfree(dwc->scratchbuf); +} + static void dwc3_core_num_eps(struct dwc3 *dwc) { struct dwc3_hwparams *parms = &dwc->hwparams; @@ -277,6 +373,7 @@ static void dwc3_cache_hwparams(struct dwc3 *dwc) static int dwc3_core_init(struct dwc3 *dwc) { unsigned long timeout; + u32 hwparams4 = dwc->hwparams.hwparams4; u32 reg; int ret; @@ -306,7 +403,9 @@ static int dwc3_core_init(struct dwc3 *dwc) cpu_relax(); } while (true); - dwc3_core_soft_reset(dwc); + ret = dwc3_core_soft_reset(dwc); + if (ret) + goto err0; reg = dwc3_readl(dwc->regs, DWC3_GCTL); reg &= ~DWC3_GCTL_SCALEDOWN_MASK; @@ -314,7 +413,29 @@ static int dwc3_core_init(struct dwc3 *dwc) switch (DWC3_GHWPARAMS1_EN_PWROPT(dwc->hwparams.hwparams1)) { case DWC3_GHWPARAMS1_EN_PWROPT_CLK: - reg &= ~DWC3_GCTL_DSBLCLKGTNG; + /** + * WORKAROUND: DWC3 revisions between 2.10a and 2.50a have an + * issue which would cause xHCI compliance tests to fail. + * + * Because of that we cannot enable clock gating on such + * configurations. + * + * Refers to: + * + * STAR#9000588375: Clock Gating, SOF Issues when ref_clk-Based + * SOF/ITP Mode Used + */ + if ((dwc->dr_mode == USB_DR_MODE_HOST || + dwc->dr_mode == USB_DR_MODE_OTG) && + (dwc->revision >= DWC3_REVISION_210A && + dwc->revision <= DWC3_REVISION_250A)) + reg |= DWC3_GCTL_DSBLCLKGTNG | DWC3_GCTL_SOFITPSYNC; + else + reg &= ~DWC3_GCTL_DSBLCLKGTNG; + break; + case DWC3_GHWPARAMS1_EN_PWROPT_HIB: + /* enable hibernation here */ + dwc->nr_scratch = DWC3_GHWPARAMS4_HIBER_SCRATCHBUFS(hwparams4); break; default: dev_dbg(dwc->dev, "No power optimization available\n"); @@ -333,16 +454,36 @@ static int dwc3_core_init(struct dwc3 *dwc) dwc3_writel(dwc->regs, DWC3_GCTL, reg); + ret = dwc3_alloc_scratch_buffers(dwc); + if (ret) + goto err1; + + ret = dwc3_setup_scratch_buffers(dwc); + if (ret) + goto err2; + return 0; +err2: + dwc3_free_scratch_buffers(dwc); + +err1: + usb_phy_shutdown(dwc->usb2_phy); + usb_phy_shutdown(dwc->usb3_phy); + phy_exit(dwc->usb2_generic_phy); + phy_exit(dwc->usb3_generic_phy); + err0: return ret; } static void dwc3_core_exit(struct dwc3 *dwc) { + dwc3_free_scratch_buffers(dwc); usb_phy_shutdown(dwc->usb2_phy); usb_phy_shutdown(dwc->usb3_phy); + phy_exit(dwc->usb2_generic_phy); + phy_exit(dwc->usb3_generic_phy); } #define DWC3_ALIGN_MASK (16 - 1) @@ -411,32 +552,52 @@ static int dwc3_probe(struct platform_device *pdev) if (IS_ERR(dwc->usb2_phy)) { ret = PTR_ERR(dwc->usb2_phy); - - /* - * if -ENXIO is returned, it means PHY layer wasn't - * enabled, so it makes no sense to return -EPROBE_DEFER - * in that case, since no PHY driver will ever probe. - */ - if (ret == -ENXIO) + if (ret == -ENXIO || ret == -ENODEV) { + dwc->usb2_phy = NULL; + } else if (ret == -EPROBE_DEFER) { return ret; - - dev_err(dev, "no usb2 phy configured\n"); - return -EPROBE_DEFER; + } else { + dev_err(dev, "no usb2 phy configured\n"); + return ret; + } } if (IS_ERR(dwc->usb3_phy)) { ret = PTR_ERR(dwc->usb3_phy); + if (ret == -ENXIO || ret == -ENODEV) { + dwc->usb3_phy = NULL; + } else if (ret == -EPROBE_DEFER) { + return ret; + } else { + dev_err(dev, "no usb3 phy configured\n"); + return ret; + } + } - /* - * if -ENXIO is returned, it means PHY layer wasn't - * enabled, so it makes no sense to return -EPROBE_DEFER - * in that case, since no PHY driver will ever probe. - */ - if (ret == -ENXIO) + dwc->usb2_generic_phy = devm_phy_get(dev, "usb2-phy"); + if (IS_ERR(dwc->usb2_generic_phy)) { + ret = PTR_ERR(dwc->usb2_generic_phy); + if (ret == -ENOSYS || ret == -ENODEV) { + dwc->usb2_generic_phy = NULL; + } else if (ret == -EPROBE_DEFER) { + return ret; + } else { + dev_err(dev, "no usb2 phy configured\n"); return ret; + } + } - dev_err(dev, "no usb3 phy configured\n"); - return -EPROBE_DEFER; + dwc->usb3_generic_phy = devm_phy_get(dev, "usb3-phy"); + if (IS_ERR(dwc->usb3_generic_phy)) { + ret = PTR_ERR(dwc->usb3_generic_phy); + if (ret == -ENOSYS || ret == -ENODEV) { + dwc->usb3_generic_phy = NULL; + } else if (ret == -EPROBE_DEFER) { + return ret; + } else { + dev_err(dev, "no usb3 phy configured\n"); + return ret; + } } dwc->xhci_resources[0].start = res->start; @@ -479,6 +640,14 @@ static int dwc3_probe(struct platform_device *pdev) goto err0; } + if (IS_ENABLED(CONFIG_USB_DWC3_HOST)) + dwc->dr_mode = USB_DR_MODE_HOST; + else if (IS_ENABLED(CONFIG_USB_DWC3_GADGET)) + dwc->dr_mode = USB_DR_MODE_PERIPHERAL; + + if (dwc->dr_mode == USB_DR_MODE_UNKNOWN) + dwc->dr_mode = USB_DR_MODE_OTG; + ret = dwc3_core_init(dwc); if (ret) { dev_err(dev, "failed to initialize core\n"); @@ -487,21 +656,20 @@ static int dwc3_probe(struct platform_device *pdev) usb_phy_set_suspend(dwc->usb2_phy, 0); usb_phy_set_suspend(dwc->usb3_phy, 0); + ret = phy_power_on(dwc->usb2_generic_phy); + if (ret < 0) + goto err1; + + ret = phy_power_on(dwc->usb3_generic_phy); + if (ret < 0) + goto err_usb2phy_power; ret = dwc3_event_buffers_setup(dwc); if (ret) { dev_err(dwc->dev, "failed to setup event buffers\n"); - goto err1; + goto err_usb3phy_power; } - if (IS_ENABLED(CONFIG_USB_DWC3_HOST)) - dwc->dr_mode = USB_DR_MODE_HOST; - else if (IS_ENABLED(CONFIG_USB_DWC3_GADGET)) - dwc->dr_mode = USB_DR_MODE_PERIPHERAL; - - if (dwc->dr_mode == USB_DR_MODE_UNKNOWN) - dwc->dr_mode = USB_DR_MODE_OTG; - switch (dwc->dr_mode) { case USB_DR_MODE_PERIPHERAL: dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE); @@ -568,6 +736,12 @@ err3: err2: dwc3_event_buffers_cleanup(dwc); +err_usb3phy_power: + phy_power_off(dwc->usb3_generic_phy); + +err_usb2phy_power: + phy_power_off(dwc->usb2_generic_phy); + err1: usb_phy_set_suspend(dwc->usb2_phy, 1); usb_phy_set_suspend(dwc->usb3_phy, 1); @@ -585,6 +759,8 @@ static int dwc3_remove(struct platform_device *pdev) usb_phy_set_suspend(dwc->usb2_phy, 1); usb_phy_set_suspend(dwc->usb3_phy, 1); + phy_power_off(dwc->usb2_generic_phy); + phy_power_off(dwc->usb3_generic_phy); pm_runtime_put_sync(&pdev->dev); pm_runtime_disable(&pdev->dev); @@ -682,6 +858,8 @@ static int dwc3_suspend(struct device *dev) usb_phy_shutdown(dwc->usb3_phy); usb_phy_shutdown(dwc->usb2_phy); + phy_exit(dwc->usb2_generic_phy); + phy_exit(dwc->usb3_generic_phy); return 0; } @@ -690,9 +868,17 @@ static int dwc3_resume(struct device *dev) { struct dwc3 *dwc = dev_get_drvdata(dev); unsigned long flags; + int ret; usb_phy_init(dwc->usb3_phy); usb_phy_init(dwc->usb2_phy); + ret = phy_init(dwc->usb2_generic_phy); + if (ret < 0) + return ret; + + ret = phy_init(dwc->usb3_generic_phy); + if (ret < 0) + goto err_usb2phy_init; spin_lock_irqsave(&dwc->lock, flags); @@ -716,6 +902,11 @@ static int dwc3_resume(struct device *dev) pm_runtime_enable(dev); return 0; + +err_usb2phy_init: + phy_exit(dwc->usb2_generic_phy); + + return ret; } static const struct dev_pm_ops dwc3_dev_pm_ops = { |