diff options
Diffstat (limited to 'drivers/usb/core')
-rw-r--r-- | drivers/usb/core/Kconfig | 2 | ||||
-rw-r--r-- | drivers/usb/core/buffer.c | 2 | ||||
-rw-r--r-- | drivers/usb/core/config.c | 214 | ||||
-rw-r--r-- | drivers/usb/core/devices.c | 19 | ||||
-rw-r--r-- | drivers/usb/core/devio.c | 3 | ||||
-rw-r--r-- | drivers/usb/core/driver.c | 60 | ||||
-rw-r--r-- | drivers/usb/core/generic.c | 4 | ||||
-rw-r--r-- | drivers/usb/core/hcd-pci.c | 2 | ||||
-rw-r--r-- | drivers/usb/core/hcd.c | 246 | ||||
-rw-r--r-- | drivers/usb/core/hcd.h | 578 | ||||
-rw-r--r-- | drivers/usb/core/hub.c | 30 | ||||
-rw-r--r-- | drivers/usb/core/hub.h | 205 | ||||
-rw-r--r-- | drivers/usb/core/inode.c | 7 | ||||
-rw-r--r-- | drivers/usb/core/message.c | 133 | ||||
-rw-r--r-- | drivers/usb/core/quirks.c | 4 | ||||
-rw-r--r-- | drivers/usb/core/sysfs.c | 25 | ||||
-rw-r--r-- | drivers/usb/core/urb.c | 18 | ||||
-rw-r--r-- | drivers/usb/core/usb.c | 116 |
18 files changed, 415 insertions, 1253 deletions
diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig index 97a819c23ef..7e594449600 100644 --- a/drivers/usb/core/Kconfig +++ b/drivers/usb/core/Kconfig @@ -109,7 +109,7 @@ config USB_SUSPEND config USB_OTG bool depends on USB && EXPERIMENTAL - select USB_SUSPEND + depends on USB_SUSPEND default n diff --git a/drivers/usb/core/buffer.c b/drivers/usb/core/buffer.c index 3ba2fff7149..2c6965484fe 100644 --- a/drivers/usb/core/buffer.c +++ b/drivers/usb/core/buffer.c @@ -14,7 +14,7 @@ #include <linux/dma-mapping.h> #include <linux/dmapool.h> #include <linux/usb.h> -#include "hcd.h" +#include <linux/usb/hcd.h> /* diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c index 0d3af6a6ee4..83126b03e7c 100644 --- a/drivers/usb/core/config.c +++ b/drivers/usb/core/config.c @@ -1,12 +1,14 @@ #include <linux/usb.h> #include <linux/usb/ch9.h> +#include <linux/usb/hcd.h> +#include <linux/usb/quirks.h> #include <linux/module.h> #include <linux/init.h> #include <linux/slab.h> #include <linux/device.h> #include <asm/byteorder.h> #include "usb.h" -#include "hcd.h" + #define USB_MAXALTSETTING 128 /* Hard limit */ #define USB_MAXENDPOINTS 30 /* Hard limit */ @@ -19,32 +21,6 @@ static inline const char *plural(int n) return (n == 1 ? "" : "s"); } -/* FIXME: this is a kludge */ -static int find_next_descriptor_more(unsigned char *buffer, int size, - int dt1, int dt2, int dt3, int *num_skipped) -{ - struct usb_descriptor_header *h; - int n = 0; - unsigned char *buffer0 = buffer; - - /* Find the next descriptor of type dt1 or dt2 or dt3 */ - while (size > 0) { - h = (struct usb_descriptor_header *) buffer; - if (h->bDescriptorType == dt1 || h->bDescriptorType == dt2 || - h->bDescriptorType == dt3) - break; - buffer += h->bLength; - size -= h->bLength; - ++n; - } - - /* Store the number of descriptors skipped and return the - * number of bytes skipped */ - if (num_skipped) - *num_skipped = n; - return buffer - buffer0; -} - static int find_next_descriptor(unsigned char *buffer, int size, int dt1, int dt2, int *num_skipped) { @@ -69,47 +45,41 @@ static int find_next_descriptor(unsigned char *buffer, int size, return buffer - buffer0; } -static int usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno, +static void usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno, int inum, int asnum, struct usb_host_endpoint *ep, - int num_ep, unsigned char *buffer, int size) + unsigned char *buffer, int size) { - unsigned char *buffer_start = buffer; - struct usb_ss_ep_comp_descriptor *desc; - int retval; - int num_skipped; + struct usb_ss_ep_comp_descriptor *desc; int max_tx; - int i; + /* The SuperSpeed endpoint companion descriptor is supposed to + * be the first thing immediately following the endpoint descriptor. + */ desc = (struct usb_ss_ep_comp_descriptor *) buffer; - if (desc->bDescriptorType != USB_DT_SS_ENDPOINT_COMP) { + if (desc->bDescriptorType != USB_DT_SS_ENDPOINT_COMP || + size < USB_DT_SS_EP_COMP_SIZE) { dev_warn(ddev, "No SuperSpeed endpoint companion for config %d " " interface %d altsetting %d ep %d: " "using minimum values\n", cfgno, inum, asnum, ep->desc.bEndpointAddress); - /* - * The next descriptor is for an Endpoint or Interface, - * no extra descriptors to copy into the companion structure, - * and we didn't eat up any of the buffer. + + /* Fill in some default values. + * Leave bmAttributes as zero, which will mean no streams for + * bulk, and isoc won't support multiple bursts of packets. + * With bursts of only one packet, and a Mult of 1, the max + * amount of data moved per endpoint service interval is one + * packet. */ - return 0; + ep->ss_ep_comp.bLength = USB_DT_SS_EP_COMP_SIZE; + ep->ss_ep_comp.bDescriptorType = USB_DT_SS_ENDPOINT_COMP; + if (usb_endpoint_xfer_isoc(&ep->desc) || + usb_endpoint_xfer_int(&ep->desc)) + ep->ss_ep_comp.wBytesPerInterval = + ep->desc.wMaxPacketSize; + return; } - memcpy(&ep->ss_ep_comp->desc, desc, USB_DT_SS_EP_COMP_SIZE); - desc = &ep->ss_ep_comp->desc; - buffer += desc->bLength; - size -= desc->bLength; - /* Eat up the other descriptors we don't care about */ - ep->ss_ep_comp->extra = buffer; - i = find_next_descriptor(buffer, size, USB_DT_ENDPOINT, - USB_DT_INTERFACE, &num_skipped); - ep->ss_ep_comp->extralen = i; - buffer += i; - size -= i; - retval = buffer - buffer_start; - if (num_skipped > 0) - dev_dbg(ddev, "skipped %d descriptor%s after %s\n", - num_skipped, plural(num_skipped), - "SuperSpeed endpoint companion"); + memcpy(&ep->ss_ep_comp, desc, USB_DT_SS_EP_COMP_SIZE); /* Check the various values */ if (usb_endpoint_xfer_control(&ep->desc) && desc->bMaxBurst != 0) { @@ -117,47 +87,48 @@ static int usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno, "config %d interface %d altsetting %d ep %d: " "setting to zero\n", desc->bMaxBurst, cfgno, inum, asnum, ep->desc.bEndpointAddress); - desc->bMaxBurst = 0; - } - if (desc->bMaxBurst > 15) { + ep->ss_ep_comp.bMaxBurst = 0; + } else if (desc->bMaxBurst > 15) { dev_warn(ddev, "Endpoint with bMaxBurst = %d in " "config %d interface %d altsetting %d ep %d: " "setting to 15\n", desc->bMaxBurst, cfgno, inum, asnum, ep->desc.bEndpointAddress); - desc->bMaxBurst = 15; + ep->ss_ep_comp.bMaxBurst = 15; } - if ((usb_endpoint_xfer_control(&ep->desc) || usb_endpoint_xfer_int(&ep->desc)) - && desc->bmAttributes != 0) { + + if ((usb_endpoint_xfer_control(&ep->desc) || + usb_endpoint_xfer_int(&ep->desc)) && + desc->bmAttributes != 0) { dev_warn(ddev, "%s endpoint with bmAttributes = %d in " "config %d interface %d altsetting %d ep %d: " "setting to zero\n", usb_endpoint_xfer_control(&ep->desc) ? "Control" : "Bulk", desc->bmAttributes, cfgno, inum, asnum, ep->desc.bEndpointAddress); - desc->bmAttributes = 0; - } - if (usb_endpoint_xfer_bulk(&ep->desc) && desc->bmAttributes > 16) { + ep->ss_ep_comp.bmAttributes = 0; + } else if (usb_endpoint_xfer_bulk(&ep->desc) && + desc->bmAttributes > 16) { dev_warn(ddev, "Bulk endpoint with more than 65536 streams in " "config %d interface %d altsetting %d ep %d: " "setting to max\n", cfgno, inum, asnum, ep->desc.bEndpointAddress); - desc->bmAttributes = 16; - } - if (usb_endpoint_xfer_isoc(&ep->desc) && desc->bmAttributes > 2) { + ep->ss_ep_comp.bmAttributes = 16; + } else if (usb_endpoint_xfer_isoc(&ep->desc) && + desc->bmAttributes > 2) { dev_warn(ddev, "Isoc endpoint has Mult of %d in " "config %d interface %d altsetting %d ep %d: " "setting to 3\n", desc->bmAttributes + 1, cfgno, inum, asnum, ep->desc.bEndpointAddress); - desc->bmAttributes = 2; + ep->ss_ep_comp.bmAttributes = 2; } - if (usb_endpoint_xfer_isoc(&ep->desc)) { + + if (usb_endpoint_xfer_isoc(&ep->desc)) max_tx = ep->desc.wMaxPacketSize * (desc->bMaxBurst + 1) * (desc->bmAttributes + 1); - } else if (usb_endpoint_xfer_int(&ep->desc)) { + else if (usb_endpoint_xfer_int(&ep->desc)) max_tx = ep->desc.wMaxPacketSize * (desc->bMaxBurst + 1); - } else { - goto valid; - } + else + max_tx = 999999; if (desc->wBytesPerInterval > max_tx) { dev_warn(ddev, "%s endpoint with wBytesPerInterval of %d in " "config %d interface %d altsetting %d ep %d: " @@ -166,10 +137,8 @@ static int usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno, desc->wBytesPerInterval, cfgno, inum, asnum, ep->desc.bEndpointAddress, max_tx); - desc->wBytesPerInterval = max_tx; + ep->ss_ep_comp.wBytesPerInterval = max_tx; } -valid: - return retval; } static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum, @@ -291,61 +260,19 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum, cfgno, inum, asnum, d->bEndpointAddress, maxp); } - /* Allocate room for and parse any SS endpoint companion descriptors */ - if (to_usb_device(ddev)->speed == USB_SPEED_SUPER) { - endpoint->extra = buffer; - i = find_next_descriptor_more(buffer, size, USB_DT_SS_ENDPOINT_COMP, - USB_DT_ENDPOINT, USB_DT_INTERFACE, &n); - endpoint->extralen = i; - buffer += i; - size -= i; - - /* Allocate space for the SS endpoint companion descriptor */ - endpoint->ss_ep_comp = kzalloc(sizeof(struct usb_host_ss_ep_comp), - GFP_KERNEL); - if (!endpoint->ss_ep_comp) - return -ENOMEM; - /* Fill in some default values (may be overwritten later) */ - endpoint->ss_ep_comp->desc.bLength = USB_DT_SS_EP_COMP_SIZE; - endpoint->ss_ep_comp->desc.bDescriptorType = USB_DT_SS_ENDPOINT_COMP; - endpoint->ss_ep_comp->desc.bMaxBurst = 0; - /* - * Leave bmAttributes as zero, which will mean no streams for - * bulk, and isoc won't support multiple bursts of packets. - * With bursts of only one packet, and a Mult of 1, the max - * amount of data moved per endpoint service interval is one - * packet. - */ - if (usb_endpoint_xfer_isoc(&endpoint->desc) || - usb_endpoint_xfer_int(&endpoint->desc)) - endpoint->ss_ep_comp->desc.wBytesPerInterval = - endpoint->desc.wMaxPacketSize; - - if (size > 0) { - retval = usb_parse_ss_endpoint_companion(ddev, cfgno, - inum, asnum, endpoint, num_ep, buffer, - size); - if (retval >= 0) { - buffer += retval; - retval = buffer - buffer0; - } - } else { - dev_warn(ddev, "config %d interface %d altsetting %d " - "endpoint 0x%X has no " - "SuperSpeed companion descriptor\n", - cfgno, inum, asnum, d->bEndpointAddress); - retval = buffer - buffer0; - } - } else { - /* Skip over any Class Specific or Vendor Specific descriptors; - * find the next endpoint or interface descriptor */ - endpoint->extra = buffer; - i = find_next_descriptor(buffer, size, USB_DT_ENDPOINT, - USB_DT_INTERFACE, &n); - endpoint->extralen = i; - retval = buffer - buffer0 + i; - } + /* Parse a possible SuperSpeed endpoint companion descriptor */ + if (to_usb_device(ddev)->speed == USB_SPEED_SUPER) + usb_parse_ss_endpoint_companion(ddev, cfgno, + inum, asnum, endpoint, buffer, size); + + /* Skip over any Class Specific or Vendor Specific descriptors; + * find the next endpoint or interface descriptor */ + endpoint->extra = buffer; + i = find_next_descriptor(buffer, size, USB_DT_ENDPOINT, + USB_DT_INTERFACE, &n); + endpoint->extralen = i; + retval = buffer - buffer0 + i; if (n > 0) dev_dbg(ddev, "skipped %d descriptor%s after %s\n", n, plural(n), "endpoint"); @@ -478,9 +405,10 @@ skip_to_next_interface_descriptor: return buffer - buffer0 + i; } -static int usb_parse_configuration(struct device *ddev, int cfgidx, +static int usb_parse_configuration(struct usb_device *dev, int cfgidx, struct usb_host_config *config, unsigned char *buffer, int size) { + struct device *ddev = &dev->dev; unsigned char *buffer0 = buffer; int cfgno; int nintf, nintf_orig; @@ -549,6 +477,16 @@ static int usb_parse_configuration(struct device *ddev, int cfgidx, } inum = d->bInterfaceNumber; + + if ((dev->quirks & USB_QUIRK_HONOR_BNUMINTERFACES) && + n >= nintf_orig) { + dev_warn(ddev, "config %d has more interface " + "descriptors, than it declares in " + "bNumInterfaces, ignoring interface " + "number: %d\n", cfgno, inum); + continue; + } + if (inum >= nintf_orig) dev_warn(ddev, "config %d has an invalid " "interface number: %d but max is %d\n", @@ -722,7 +660,6 @@ int usb_get_configuration(struct usb_device *dev) int ncfg = dev->descriptor.bNumConfigurations; int result = 0; unsigned int cfgno, length; - unsigned char *buffer; unsigned char *bigbuffer; struct usb_config_descriptor *desc; @@ -751,17 +688,16 @@ int usb_get_configuration(struct usb_device *dev) if (!dev->rawdescriptors) goto err2; - buffer = kmalloc(USB_DT_CONFIG_SIZE, GFP_KERNEL); - if (!buffer) + desc = kmalloc(USB_DT_CONFIG_SIZE, GFP_KERNEL); + if (!desc) goto err2; - desc = (struct usb_config_descriptor *)buffer; result = 0; for (; cfgno < ncfg; cfgno++) { /* We grab just the first descriptor so we know how long * the whole configuration is */ result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno, - buffer, USB_DT_CONFIG_SIZE); + desc, USB_DT_CONFIG_SIZE); if (result < 0) { dev_err(ddev, "unable to read config index %d " "descriptor/%s: %d\n", cfgno, "start", result); @@ -800,7 +736,7 @@ int usb_get_configuration(struct usb_device *dev) dev->rawdescriptors[cfgno] = bigbuffer; - result = usb_parse_configuration(&dev->dev, cfgno, + result = usb_parse_configuration(dev, cfgno, &dev->config[cfgno], bigbuffer, length); if (result < 0) { ++cfgno; @@ -810,7 +746,7 @@ int usb_get_configuration(struct usb_device *dev) result = 0; err: - kfree(buffer); + kfree(desc); out_not_authorized: dev->descriptor.bNumConfigurations = cfgno; err2: diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c index 19bc03a9fec..3449742c00e 100644 --- a/drivers/usb/core/devices.c +++ b/drivers/usb/core/devices.c @@ -1,7 +1,8 @@ /* * devices.c * (C) Copyright 1999 Randy Dunlap. - * (C) Copyright 1999,2000 Thomas Sailer <sailer@ife.ee.ethz.ch>. (proc file per device) + * (C) Copyright 1999,2000 Thomas Sailer <sailer@ife.ee.ethz.ch>. + * (proc file per device) * (C) Copyright 1999 Deti Fliegl (new USB architecture) * * This program is free software; you can redistribute it and/or modify @@ -55,11 +56,11 @@ #include <linux/usb.h> #include <linux/smp_lock.h> #include <linux/usbdevice_fs.h> +#include <linux/usb/hcd.h> #include <linux/mutex.h> -#include <asm/uaccess.h> +#include <linux/uaccess.h> #include "usb.h" -#include "hcd.h" /* Define ALLOW_SERIAL_NUMBER if you want to see the serial number of devices */ #define ALLOW_SERIAL_NUMBER @@ -138,8 +139,8 @@ struct class_info { char *class_name; }; -static const struct class_info clas_info[] = -{ /* max. 5 chars. per name string */ +static const struct class_info clas_info[] = { + /* max. 5 chars. per name string */ {USB_CLASS_PER_INTERFACE, ">ifc"}, {USB_CLASS_AUDIO, "audio"}, {USB_CLASS_COMM, "comm."}, @@ -191,8 +192,10 @@ static char *usb_dump_endpoint_descriptor(int speed, char *start, char *end, if (speed == USB_SPEED_HIGH) { switch (le16_to_cpu(desc->wMaxPacketSize) & (0x03 << 11)) { - case 1 << 11: bandwidth = 2; break; - case 2 << 11: bandwidth = 3; break; + case 1 << 11: + bandwidth = 2; break; + case 2 << 11: + bandwidth = 3; break; } } @@ -200,7 +203,7 @@ static char *usb_dump_endpoint_descriptor(int speed, char *start, char *end, switch (usb_endpoint_type(desc)) { case USB_ENDPOINT_XFER_CONTROL: type = "Ctrl"; - if (speed == USB_SPEED_HIGH) /* uframes per NAK */ + if (speed == USB_SPEED_HIGH) /* uframes per NAK */ interval = desc->bInterval; else interval = 0; diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 3466fdc5bb1..c2f62a3993d 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -43,6 +43,7 @@ #include <linux/module.h> #include <linux/usb.h> #include <linux/usbdevice_fs.h> +#include <linux/usb/hcd.h> /* for usbcore internals */ #include <linux/cdev.h> #include <linux/notifier.h> #include <linux/security.h> @@ -50,9 +51,7 @@ #include <asm/byteorder.h> #include <linux/moduleparam.h> -#include "hcd.h" /* for usbcore internals */ #include "usb.h" -#include "hub.h" #define USB_MAXBUS 64 #define USB_DEVICE_MAX USB_MAXBUS * 128 diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index 2f3dc4cdf79..ded550eda5d 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -26,8 +26,9 @@ #include <linux/slab.h> #include <linux/usb.h> #include <linux/usb/quirks.h> +#include <linux/usb/hcd.h> #include <linux/pm_runtime.h> -#include "hcd.h" + #include "usb.h" @@ -333,7 +334,8 @@ static int usb_probe_interface(struct device *dev) usb_cancel_queued_reset(intf); /* Unbound interfaces are always runtime-PM-disabled and -suspended */ - pm_runtime_disable(dev); + if (driver->supports_autosuspend) + pm_runtime_disable(dev); pm_runtime_set_suspended(dev); usb_autosuspend_device(udev); @@ -388,7 +390,8 @@ static int usb_unbind_interface(struct device *dev) intf->needs_remote_wakeup = 0; /* Unbound interfaces are always runtime-PM-disabled and -suspended */ - pm_runtime_disable(dev); + if (driver->supports_autosuspend) + pm_runtime_disable(dev); pm_runtime_set_suspended(dev); /* Undo any residual pm_autopm_get_interface_* calls */ @@ -437,14 +440,17 @@ int usb_driver_claim_interface(struct usb_driver *driver, iface->condition = USB_INTERFACE_BOUND; - /* Claimed interfaces are initially inactive (suspended). They are - * runtime-PM-enabled only if the driver has autosuspend support. - * They are sensitive to their children's power states. + /* Claimed interfaces are initially inactive (suspended) and + * runtime-PM-enabled, but only if the driver has autosuspend + * support. Otherwise they are marked active, to prevent the + * device from being autosuspended, but left disabled. In either + * case they are sensitive to their children's power states. */ - pm_runtime_set_suspended(dev); pm_suspend_ignore_children(dev, false); if (driver->supports_autosuspend) pm_runtime_enable(dev); + else + pm_runtime_set_active(dev); /* if interface was already added, bind now; else let * the future device_add() bind it, bypassing probe() @@ -1355,13 +1361,9 @@ int usb_resume(struct device *dev, pm_message_t msg) * * The caller must hold @udev's device lock. */ -int usb_enable_autosuspend(struct usb_device *udev) +void usb_enable_autosuspend(struct usb_device *udev) { - if (udev->autosuspend_disabled) { - udev->autosuspend_disabled = 0; - usb_autosuspend_device(udev); - } - return 0; + pm_runtime_allow(&udev->dev); } EXPORT_SYMBOL_GPL(usb_enable_autosuspend); @@ -1374,16 +1376,9 @@ EXPORT_SYMBOL_GPL(usb_enable_autosuspend); * * The caller must hold @udev's device lock. */ -int usb_disable_autosuspend(struct usb_device *udev) +void usb_disable_autosuspend(struct usb_device *udev) { - int rc = 0; - - if (!udev->autosuspend_disabled) { - rc = usb_autoresume_device(udev); - if (rc == 0) - udev->autosuspend_disabled = 1; - } - return rc; + pm_runtime_forbid(&udev->dev); } EXPORT_SYMBOL_GPL(usb_disable_autosuspend); @@ -1485,9 +1480,6 @@ int usb_autoresume_device(struct usb_device *udev) * 0, a delayed autosuspend request for @intf's device is attempted. The * attempt may fail (see autosuspend_check()). * - * If the driver has set @intf->needs_remote_wakeup then autosuspend will - * take place only if the device's remote-wakeup facility is enabled. - * * This routine can run only in process context. */ void usb_autopm_put_interface(struct usb_interface *intf) @@ -1530,7 +1522,7 @@ void usb_autopm_put_interface_async(struct usb_interface *intf) atomic_dec(&intf->pm_usage_cnt); pm_runtime_put_noidle(&intf->dev); - if (!udev->autosuspend_disabled) { + if (udev->dev.power.runtime_auto) { /* Optimization: Don't schedule a delayed autosuspend if * the timer is already running and the expiration time * wouldn't change. @@ -1672,14 +1664,14 @@ EXPORT_SYMBOL_GPL(usb_autopm_get_interface_no_resume); /* Internal routine to check whether we may autosuspend a device. */ static int autosuspend_check(struct usb_device *udev) { - int i; + int w, i; struct usb_interface *intf; unsigned long suspend_time, j; /* Fail if autosuspend is disabled, or any interfaces are in use, or * any interface drivers require remote wakeup but it isn't available. */ - udev->do_remote_wakeup = device_may_wakeup(&udev->dev); + w = 0; if (udev->actconfig) { for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) { intf = udev->actconfig->interface[i]; @@ -1693,12 +1685,7 @@ static int autosuspend_check(struct usb_device *udev) continue; if (atomic_read(&intf->dev.power.usage_count) > 0) return -EBUSY; - if (intf->needs_remote_wakeup && - !udev->do_remote_wakeup) { - dev_dbg(&udev->dev, "remote wakeup needed " - "for autosuspend\n"); - return -EOPNOTSUPP; - } + w |= intf->needs_remote_wakeup; /* Don't allow autosuspend if the device will need * a reset-resume and any of its interface drivers @@ -1714,6 +1701,11 @@ static int autosuspend_check(struct usb_device *udev) } } } + if (w && !device_can_wakeup(&udev->dev)) { + dev_dbg(&udev->dev, "remote wakeup needed for autosuspend\n"); + return -EOPNOTSUPP; + } + udev->do_remote_wakeup = w; /* If everything is okay but the device hasn't been idle for long * enough, queue a delayed autosuspend request. diff --git a/drivers/usb/core/generic.c b/drivers/usb/core/generic.c index bdf87a8414a..9a34ccb0a1c 100644 --- a/drivers/usb/core/generic.c +++ b/drivers/usb/core/generic.c @@ -18,8 +18,8 @@ */ #include <linux/usb.h> +#include <linux/usb/hcd.h> #include "usb.h" -#include "hcd.h" static inline const char *plural(int n) { @@ -120,7 +120,7 @@ int usb_choose_configuration(struct usb_device *udev) * than a vendor-specific driver. */ else if (udev->descriptor.bDeviceClass != USB_CLASS_VENDOR_SPEC && - (!desc || desc->bInterfaceClass != + (desc && desc->bInterfaceClass != USB_CLASS_VENDOR_SPEC)) { best = c; break; diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index 15286533c15..1cf2d1e79a5 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -21,6 +21,7 @@ #include <linux/pci.h> #include <linux/pm_runtime.h> #include <linux/usb.h> +#include <linux/usb/hcd.h> #include <asm/io.h> #include <asm/irq.h> @@ -33,7 +34,6 @@ #endif #include "usb.h" -#include "hcd.h" /* PCI-based HCs are common, but plenty of non-PCI HCs are used too */ diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 2f8cedda800..12742f152f4 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -38,14 +38,12 @@ #include <asm/unaligned.h> #include <linux/platform_device.h> #include <linux/workqueue.h> -#include <linux/mutex.h> #include <linux/pm_runtime.h> #include <linux/usb.h> +#include <linux/usb/hcd.h> #include "usb.h" -#include "hcd.h" -#include "hub.h" /*-------------------------------------------------------------------------*/ @@ -1261,6 +1259,51 @@ static void hcd_free_coherent(struct usb_bus *bus, dma_addr_t *dma_handle, *dma_handle = 0; } +static void unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb) +{ + enum dma_data_direction dir; + + if (urb->transfer_flags & URB_SETUP_MAP_SINGLE) + dma_unmap_single(hcd->self.controller, + urb->setup_dma, + sizeof(struct usb_ctrlrequest), + DMA_TO_DEVICE); + else if (urb->transfer_flags & URB_SETUP_MAP_LOCAL) + hcd_free_coherent(urb->dev->bus, + &urb->setup_dma, + (void **) &urb->setup_packet, + sizeof(struct usb_ctrlrequest), + DMA_TO_DEVICE); + + dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE; + if (urb->transfer_flags & URB_DMA_MAP_SG) + dma_unmap_sg(hcd->self.controller, + urb->sg, + urb->num_sgs, + dir); + else if (urb->transfer_flags & URB_DMA_MAP_PAGE) + dma_unmap_page(hcd->self.controller, + urb->transfer_dma, + urb->transfer_buffer_length, + dir); + else if (urb->transfer_flags & URB_DMA_MAP_SINGLE) + dma_unmap_single(hcd->self.controller, + urb->transfer_dma, + urb->transfer_buffer_length, + dir); + else if (urb->transfer_flags & URB_MAP_LOCAL) + hcd_free_coherent(urb->dev->bus, + &urb->transfer_dma, + &urb->transfer_buffer, + urb->transfer_buffer_length, + dir); + + /* Make it safe to call this routine more than once */ + urb->transfer_flags &= ~(URB_SETUP_MAP_SINGLE | URB_SETUP_MAP_LOCAL | + URB_DMA_MAP_SG | URB_DMA_MAP_PAGE | + URB_DMA_MAP_SINGLE | URB_MAP_LOCAL); +} + static int map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags) { @@ -1272,11 +1315,8 @@ static int map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, * unless it uses pio or talks to another transport, * or uses the provided scatter gather list for bulk. */ - if (is_root_hub(urb->dev)) - return 0; - if (usb_endpoint_xfer_control(&urb->ep->desc) - && !(urb->transfer_flags & URB_NO_SETUP_DMA_MAP)) { + if (usb_endpoint_xfer_control(&urb->ep->desc)) { if (hcd->self.uses_dma) { urb->setup_dma = dma_map_single( hcd->self.controller, @@ -1286,27 +1326,64 @@ static int map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, if (dma_mapping_error(hcd->self.controller, urb->setup_dma)) return -EAGAIN; - } else if (hcd->driver->flags & HCD_LOCAL_MEM) + urb->transfer_flags |= URB_SETUP_MAP_SINGLE; + } else if (hcd->driver->flags & HCD_LOCAL_MEM) { ret = hcd_alloc_coherent( urb->dev->bus, mem_flags, &urb->setup_dma, (void **)&urb->setup_packet, sizeof(struct usb_ctrlrequest), DMA_TO_DEVICE); + if (ret) + return ret; + urb->transfer_flags |= URB_SETUP_MAP_LOCAL; + } } dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE; - if (ret == 0 && urb->transfer_buffer_length != 0 + if (urb->transfer_buffer_length != 0 && !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) { if (hcd->self.uses_dma) { - urb->transfer_dma = dma_map_single ( - hcd->self.controller, - urb->transfer_buffer, - urb->transfer_buffer_length, - dir); - if (dma_mapping_error(hcd->self.controller, + if (urb->num_sgs) { + int n = dma_map_sg( + hcd->self.controller, + urb->sg, + urb->num_sgs, + dir); + if (n <= 0) + ret = -EAGAIN; + else + urb->transfer_flags |= URB_DMA_MAP_SG; + if (n != urb->num_sgs) { + urb->num_sgs = n; + urb->transfer_flags |= + URB_DMA_SG_COMBINED; + } + } else if (urb->sg) { + struct scatterlist *sg = urb->sg; + urb->transfer_dma = dma_map_page( + hcd->self.controller, + sg_page(sg), + sg->offset, + urb->transfer_buffer_length, + dir); + if (dma_mapping_error(hcd->self.controller, urb->transfer_dma)) - return -EAGAIN; + ret = -EAGAIN; + else + urb->transfer_flags |= URB_DMA_MAP_PAGE; + } else { + urb->transfer_dma = dma_map_single( + hcd->self.controller, + urb->transfer_buffer, + urb->transfer_buffer_length, + dir); + if (dma_mapping_error(hcd->self.controller, + urb->transfer_dma)) + ret = -EAGAIN; + else + urb->transfer_flags |= URB_DMA_MAP_SINGLE; + } } else if (hcd->driver->flags & HCD_LOCAL_MEM) { ret = hcd_alloc_coherent( urb->dev->bus, mem_flags, @@ -1314,55 +1391,16 @@ static int map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, &urb->transfer_buffer, urb->transfer_buffer_length, dir); - - if (ret && usb_endpoint_xfer_control(&urb->ep->desc) - && !(urb->transfer_flags & URB_NO_SETUP_DMA_MAP)) - hcd_free_coherent(urb->dev->bus, - &urb->setup_dma, - (void **)&urb->setup_packet, - sizeof(struct usb_ctrlrequest), - DMA_TO_DEVICE); + if (ret == 0) + urb->transfer_flags |= URB_MAP_LOCAL; } + if (ret && (urb->transfer_flags & (URB_SETUP_MAP_SINGLE | + URB_SETUP_MAP_LOCAL))) + unmap_urb_for_dma(hcd, urb); } return ret; } -static void unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb) -{ - enum dma_data_direction dir; - - if (is_root_hub(urb->dev)) - return; - - if (usb_endpoint_xfer_control(&urb->ep->desc) - && !(urb->transfer_flags & URB_NO_SETUP_DMA_MAP)) { - if (hcd->self.uses_dma) - dma_unmap_single(hcd->self.controller, urb->setup_dma, - sizeof(struct usb_ctrlrequest), - DMA_TO_DEVICE); - else if (hcd->driver->flags & HCD_LOCAL_MEM) - hcd_free_coherent(urb->dev->bus, &urb->setup_dma, - (void **)&urb->setup_packet, - sizeof(struct usb_ctrlrequest), - DMA_TO_DEVICE); - } - - dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE; - if (urb->transfer_buffer_length != 0 - && !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) { - if (hcd->self.uses_dma) - dma_unmap_single(hcd->self.controller, - urb->transfer_dma, - urb->transfer_buffer_length, - dir); - else if (hcd->driver->flags & HCD_LOCAL_MEM) - hcd_free_coherent(urb->dev->bus, &urb->transfer_dma, - &urb->transfer_buffer, - urb->transfer_buffer_length, - dir); - } -} - /*-------------------------------------------------------------------------*/ /* may be called in any context with a valid urb->dev usecount @@ -1391,21 +1429,20 @@ int usb_hcd_submit_urb (struct urb *urb, gfp_t mem_flags) * URBs must be submitted in process context with interrupts * enabled. */ - status = map_urb_for_dma(hcd, urb, mem_flags); - if (unlikely(status)) { - usbmon_urb_submit_error(&hcd->self, urb, status); - goto error; - } - if (is_root_hub(urb->dev)) + if (is_root_hub(urb->dev)) { status = rh_urb_enqueue(hcd, urb); - else - status = hcd->driver->urb_enqueue(hcd, urb, mem_flags); + } else { + status = map_urb_for_dma(hcd, urb, mem_flags); + if (likely(status == 0)) { + status = hcd->driver->urb_enqueue(hcd, urb, mem_flags); + if (unlikely(status)) + unmap_urb_for_dma(hcd, urb); + } + } if (unlikely(status)) { usbmon_urb_submit_error(&hcd->self, urb, status); - unmap_urb_for_dma(hcd, urb); - error: urb->hcpriv = NULL; INIT_LIST_HEAD(&urb->urb_list); atomic_dec(&urb->use_count); @@ -1775,6 +1812,75 @@ void usb_hcd_reset_endpoint(struct usb_device *udev, } } +/** + * usb_alloc_streams - allocate bulk endpoint stream IDs. + * @interface: alternate setting that includes all endpoints. + * @eps: array of endpoints that need streams. + * @num_eps: number of endpoints in the array. + * @num_streams: number of streams to allocate. + * @mem_flags: flags hcd should use to allocate memory. + * + * Sets up a group of bulk endpoints to have num_streams stream IDs available. + * Drivers may queue multiple transfers to different stream IDs, which may + * complete in a different order than they were queued. + */ +int usb_alloc_streams(struct usb_interface *interface, + struct usb_host_endpoint **eps, unsigned int num_eps, + unsigned int num_streams, gfp_t mem_flags) +{ + struct usb_hcd *hcd; + struct usb_device *dev; + int i; + + dev = interface_to_usbdev(interface); + hcd = bus_to_hcd(dev->bus); + if (!hcd->driver->alloc_streams || !hcd->driver->free_streams) + return -EINVAL; + if (dev->speed != USB_SPEED_SUPER) + return -EINVAL; + + /* Streams only apply to bulk endpoints. */ + for (i = 0; i < num_eps; i++) + if (!usb_endpoint_xfer_bulk(&eps[i]->desc)) + return -EINVAL; + + return hcd->driver->alloc_streams(hcd, dev, eps, num_eps, + num_streams, mem_flags); +} +EXPORT_SYMBOL_GPL(usb_alloc_streams); + +/** + * usb_free_streams - free bulk endpoint stream IDs. + * @interface: alternate setting that includes all endpoints. + * @eps: array of endpoints to remove streams from. + * @num_eps: number of endpoints in the array. + * @mem_flags: flags hcd should use to allocate memory. + * + * Reverts a group of bulk endpoints back to not using stream IDs. + * Can fail if we are given bad arguments, or HCD is broken. + */ +void usb_free_streams(struct usb_interface *interface, + struct usb_host_endpoint **eps, unsigned int num_eps, + gfp_t mem_flags) +{ + struct usb_hcd *hcd; + struct usb_device *dev; + int i; + + dev = interface_to_usbdev(interface); + hcd = bus_to_hcd(dev->bus); + if (dev->speed != USB_SPEED_SUPER) + return; + + /* Streams only apply to bulk endpoints. */ + for (i = 0; i < num_eps; i++) + if (!usb_endpoint_xfer_bulk(&eps[i]->desc)) + return; + + hcd->driver->free_streams(hcd, dev, eps, num_eps, mem_flags); +} +EXPORT_SYMBOL_GPL(usb_free_streams); + /* Protect against drivers that try to unlink URBs after the device * is gone, by waiting until all unlinks for @udev are finished. * Since we don't currently track URBs by device, simply wait until diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h deleted file mode 100644 index a3cdb09734a..00000000000 --- a/drivers/usb/core/hcd.h +++ /dev/null @@ -1,578 +0,0 @@ -/* - * Copyright (c) 2001-2002 by David Brownell - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY - * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software Foundation, - * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __USB_CORE_HCD_H -#define __USB_CORE_HCD_H - -#ifdef __KERNEL__ - -#include <linux/rwsem.h> - -#define MAX_TOPO_LEVEL 6 - -/* This file contains declarations of usbcore internals that are mostly - * used or exposed by Host Controller Drivers. - */ - -/* - * USB Packet IDs (PIDs) - */ -#define USB_PID_EXT 0xf0 /* USB 2.0 LPM ECN */ -#define USB_PID_OUT 0xe1 -#define USB_PID_ACK 0xd2 -#define USB_PID_DATA0 0xc3 -#define USB_PID_PING 0xb4 /* USB 2.0 */ -#define USB_PID_SOF 0xa5 -#define USB_PID_NYET 0x96 /* USB 2.0 */ -#define USB_PID_DATA2 0x87 /* USB 2.0 */ -#define USB_PID_SPLIT 0x78 /* USB 2.0 */ -#define USB_PID_IN 0x69 -#define USB_PID_NAK 0x5a -#define USB_PID_DATA1 0x4b -#define USB_PID_PREAMBLE 0x3c /* Token mode */ -#define USB_PID_ERR 0x3c /* USB 2.0: handshake mode */ -#define USB_PID_SETUP 0x2d -#define USB_PID_STALL 0x1e -#define USB_PID_MDATA 0x0f /* USB 2.0 */ - -/*-------------------------------------------------------------------------*/ - -/* - * USB Host Controller Driver (usb_hcd) framework - * - * Since "struct usb_bus" is so thin, you can't share much code in it. - * This framework is a layer over that, and should be more sharable. - * - * @authorized_default: Specifies if new devices are authorized to - * connect by default or they require explicit - * user space authorization; this bit is settable - * through /sys/class/usb_host/X/authorized_default. - * For the rest is RO, so we don't lock to r/w it. - */ - -/*-------------------------------------------------------------------------*/ - -struct usb_hcd { - - /* - * housekeeping - */ - struct usb_bus self; /* hcd is-a bus */ - struct kref kref; /* reference counter */ - - const char *product_desc; /* product/vendor string */ - char irq_descr[24]; /* driver + bus # */ - - struct timer_list rh_timer; /* drives root-hub polling */ - struct urb *status_urb; /* the current status urb */ -#ifdef CONFIG_USB_SUSPEND - struct work_struct wakeup_work; /* for remote wakeup */ -#endif - - /* - * hardware info/state - */ - const struct hc_driver *driver; /* hw-specific hooks */ - - /* Flags that need to be manipulated atomically */ - unsigned long flags; -#define HCD_FLAG_HW_ACCESSIBLE 0x00000001 -#define HCD_FLAG_SAW_IRQ 0x00000002 - - unsigned rh_registered:1;/* is root hub registered? */ - - /* The next flag is a stopgap, to be removed when all the HCDs - * support the new root-hub polling mechanism. */ - unsigned uses_new_polling:1; - unsigned poll_rh:1; /* poll for rh status? */ - unsigned poll_pending:1; /* status has changed? */ - unsigned wireless:1; /* Wireless USB HCD */ - unsigned authorized_default:1; - unsigned has_tt:1; /* Integrated TT in root hub */ - - int irq; /* irq allocated */ - void __iomem *regs; /* device memory/io */ - u64 rsrc_start; /* memory/io resource start */ - u64 rsrc_len; /* memory/io resource length */ - unsigned power_budget; /* in mA, 0 = no limit */ - - /* bandwidth_mutex should be taken before adding or removing - * any new bus bandwidth constraints: - * 1. Before adding a configuration for a new device. - * 2. Before removing the configuration to put the device into - * the addressed state. - * 3. Before selecting a different configuration. - * 4. Before selecting an alternate interface setting. - * - * bandwidth_mutex should be dropped after a successful control message - * to the device, or resetting the bandwidth after a failed attempt. - */ - struct mutex bandwidth_mutex; - - -#define HCD_BUFFER_POOLS 4 - struct dma_pool *pool [HCD_BUFFER_POOLS]; - - int state; -# define __ACTIVE 0x01 -# define __SUSPEND 0x04 -# define __TRANSIENT 0x80 - -# define HC_STATE_HALT 0 -# define HC_STATE_RUNNING (__ACTIVE) -# define HC_STATE_QUIESCING (__SUSPEND|__TRANSIENT|__ACTIVE) -# define HC_STATE_RESUMING (__SUSPEND|__TRANSIENT) -# define HC_STATE_SUSPENDED (__SUSPEND) - -#define HC_IS_RUNNING(state) ((state) & __ACTIVE) -#define HC_IS_SUSPENDED(state) ((state) & __SUSPEND) - - /* more shared queuing code would be good; it should support - * smarter scheduling, handle transaction translators, etc; - * input size of periodic table to an interrupt scheduler. - * (ohci 32, uhci 1024, ehci 256/512/1024). - */ - - /* The HC driver's private data is stored at the end of - * this structure. - */ - unsigned long hcd_priv[0] - __attribute__ ((aligned(sizeof(unsigned long)))); -}; - -/* 2.4 does this a bit differently ... */ -static inline struct usb_bus *hcd_to_bus(struct usb_hcd *hcd) -{ - return &hcd->self; -} - -static inline struct usb_hcd *bus_to_hcd(struct usb_bus *bus) -{ - return container_of(bus, struct usb_hcd, self); -} - -struct hcd_timeout { /* timeouts we allocate */ - struct list_head timeout_list; - struct timer_list timer; -}; - -/*-------------------------------------------------------------------------*/ - - -struct hc_driver { - const char *description; /* "ehci-hcd" etc */ - const char *product_desc; /* product/vendor string */ - size_t hcd_priv_size; /* size of private data */ - - /* irq handler */ - irqreturn_t (*irq) (struct usb_hcd *hcd); - - int flags; -#define HCD_MEMORY 0x0001 /* HC regs use memory (else I/O) */ -#define HCD_LOCAL_MEM 0x0002 /* HC needs local memory */ -#define HCD_USB11 0x0010 /* USB 1.1 */ -#define HCD_USB2 0x0020 /* USB 2.0 */ -#define HCD_USB3 0x0040 /* USB 3.0 */ -#define HCD_MASK 0x0070 - - /* called to init HCD and root hub */ - int (*reset) (struct usb_hcd *hcd); - int (*start) (struct usb_hcd *hcd); - - /* NOTE: these suspend/resume calls relate to the HC as - * a whole, not just the root hub; they're for PCI bus glue. - */ - /* called after suspending the hub, before entering D3 etc */ - int (*pci_suspend)(struct usb_hcd *hcd); - - /* called after entering D0 (etc), before resuming the hub */ - int (*pci_resume)(struct usb_hcd *hcd, bool hibernated); - - /* cleanly make HCD stop writing memory and doing I/O */ - void (*stop) (struct usb_hcd *hcd); - - /* shutdown HCD */ - void (*shutdown) (struct usb_hcd *hcd); - - /* return current frame number */ - int (*get_frame_number) (struct usb_hcd *hcd); - - /* manage i/o requests, device state */ - int (*urb_enqueue)(struct usb_hcd *hcd, - struct urb *urb, gfp_t mem_flags); - int (*urb_dequeue)(struct usb_hcd *hcd, - struct urb *urb, int status); - - /* hw synch, freeing endpoint resources that urb_dequeue can't */ - void (*endpoint_disable)(struct usb_hcd *hcd, - struct usb_host_endpoint *ep); - - /* (optional) reset any endpoint state such as sequence number - and current window */ - void (*endpoint_reset)(struct usb_hcd *hcd, - struct usb_host_endpoint *ep); - - /* root hub support */ - int (*hub_status_data) (struct usb_hcd *hcd, char *buf); - int (*hub_control) (struct usb_hcd *hcd, - u16 typeReq, u16 wValue, u16 wIndex, - char *buf, u16 wLength); - int (*bus_suspend)(struct usb_hcd *); - int (*bus_resume)(struct usb_hcd *); - int (*start_port_reset)(struct usb_hcd *, unsigned port_num); - - /* force handover of high-speed port to full-speed companion */ - void (*relinquish_port)(struct usb_hcd *, int); - /* has a port been handed over to a companion? */ - int (*port_handed_over)(struct usb_hcd *, int); - - /* CLEAR_TT_BUFFER completion callback */ - void (*clear_tt_buffer_complete)(struct usb_hcd *, - struct usb_host_endpoint *); - - /* xHCI specific functions */ - /* Called by usb_alloc_dev to alloc HC device structures */ - int (*alloc_dev)(struct usb_hcd *, struct usb_device *); - /* Called by usb_disconnect to free HC device structures */ - void (*free_dev)(struct usb_hcd *, struct usb_device *); - - /* Bandwidth computation functions */ - /* Note that add_endpoint() can only be called once per endpoint before - * check_bandwidth() or reset_bandwidth() must be called. - * drop_endpoint() can only be called once per endpoint also. - * A call to xhci_drop_endpoint() followed by a call to xhci_add_endpoint() will - * add the endpoint to the schedule with possibly new parameters denoted by a - * different endpoint descriptor in usb_host_endpoint. - * A call to xhci_add_endpoint() followed by a call to xhci_drop_endpoint() is - * not allowed. - */ - /* Allocate endpoint resources and add them to a new schedule */ - int (*add_endpoint)(struct usb_hcd *, struct usb_device *, struct usb_host_endpoint *); - /* Drop an endpoint from a new schedule */ - int (*drop_endpoint)(struct usb_hcd *, struct usb_device *, struct usb_host_endpoint *); - /* Check that a new hardware configuration, set using - * endpoint_enable and endpoint_disable, does not exceed bus - * bandwidth. This must be called before any set configuration - * or set interface requests are sent to the device. - */ - int (*check_bandwidth)(struct usb_hcd *, struct usb_device *); - /* Reset the device schedule to the last known good schedule, - * which was set from a previous successful call to - * check_bandwidth(). This reverts any add_endpoint() and - * drop_endpoint() calls since that last successful call. - * Used for when a check_bandwidth() call fails due to resource - * or bandwidth constraints. - */ - void (*reset_bandwidth)(struct usb_hcd *, struct usb_device *); - /* Returns the hardware-chosen device address */ - int (*address_device)(struct usb_hcd *, struct usb_device *udev); - /* Notifies the HCD after a hub descriptor is fetched. - * Will block. - */ - int (*update_hub_device)(struct usb_hcd *, struct usb_device *hdev, - struct usb_tt *tt, gfp_t mem_flags); - int (*reset_device)(struct usb_hcd *, struct usb_device *); -}; - -extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb); -extern int usb_hcd_check_unlink_urb(struct usb_hcd *hcd, struct urb *urb, - int status); -extern void usb_hcd_unlink_urb_from_ep(struct usb_hcd *hcd, struct urb *urb); - -extern int usb_hcd_submit_urb(struct urb *urb, gfp_t mem_flags); -extern int usb_hcd_unlink_urb(struct urb *urb, int status); -extern void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb, - int status); -extern void usb_hcd_flush_endpoint(struct usb_device *udev, - struct usb_host_endpoint *ep); -extern void usb_hcd_disable_endpoint(struct usb_device *udev, - struct usb_host_endpoint *ep); -extern void usb_hcd_reset_endpoint(struct usb_device *udev, - struct usb_host_endpoint *ep); -extern void usb_hcd_synchronize_unlinks(struct usb_device *udev); -extern int usb_hcd_alloc_bandwidth(struct usb_device *udev, - struct usb_host_config *new_config, - struct usb_host_interface *old_alt, - struct usb_host_interface *new_alt); -extern int usb_hcd_get_frame_number(struct usb_device *udev); - -extern struct usb_hcd *usb_create_hcd(const struct hc_driver *driver, - struct device *dev, const char *bus_name); -extern struct usb_hcd *usb_get_hcd(struct usb_hcd *hcd); -extern void usb_put_hcd(struct usb_hcd *hcd); -extern int usb_add_hcd(struct usb_hcd *hcd, - unsigned int irqnum, unsigned long irqflags); -extern void usb_remove_hcd(struct usb_hcd *hcd); - -struct platform_device; -extern void usb_hcd_platform_shutdown(struct platform_device *dev); - -#ifdef CONFIG_PCI -struct pci_dev; -struct pci_device_id; -extern int usb_hcd_pci_probe(struct pci_dev *dev, - const struct pci_device_id *id); -extern void usb_hcd_pci_remove(struct pci_dev *dev); -extern void usb_hcd_pci_shutdown(struct pci_dev *dev); - -#ifdef CONFIG_PM_SLEEP -extern const struct dev_pm_ops usb_hcd_pci_pm_ops; -#endif -#endif /* CONFIG_PCI */ - -/* pci-ish (pdev null is ok) buffer alloc/mapping support */ -int hcd_buffer_create(struct usb_hcd *hcd); -void hcd_buffer_destroy(struct usb_hcd *hcd); - -void *hcd_buffer_alloc(struct usb_bus *bus, size_t size, - gfp_t mem_flags, dma_addr_t *dma); -void hcd_buffer_free(struct usb_bus *bus, size_t size, - void *addr, dma_addr_t dma); - -/* generic bus glue, needed for host controllers that don't use PCI */ -extern irqreturn_t usb_hcd_irq(int irq, void *__hcd); - -extern void usb_hc_died(struct usb_hcd *hcd); -extern void usb_hcd_poll_rh_status(struct usb_hcd *hcd); - -/* The D0/D1 toggle bits ... USE WITH CAUTION (they're almost hcd-internal) */ -#define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> (ep)) & 1) -#define usb_dotoggle(dev, ep, out) ((dev)->toggle[out] ^= (1 << (ep))) -#define usb_settoggle(dev, ep, out, bit) \ - ((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << (ep))) | \ - ((bit) << (ep))) - -/* -------------------------------------------------------------------------- */ - -/* Enumeration is only for the hub driver, or HCD virtual root hubs */ -extern struct usb_device *usb_alloc_dev(struct usb_device *parent, - struct usb_bus *, unsigned port); -extern int usb_new_device(struct usb_device *dev); -extern void usb_disconnect(struct usb_device **); - -extern int usb_get_configuration(struct usb_device *dev); -extern void usb_destroy_configuration(struct usb_device *dev); - -/*-------------------------------------------------------------------------*/ - -/* - * HCD Root Hub support - */ - -#include "hub.h" - -/* (shifted) direction/type/recipient from the USB 2.0 spec, table 9.2 */ -#define DeviceRequest \ - ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8) -#define DeviceOutRequest \ - ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8) - -#define InterfaceRequest \ - ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8) - -#define EndpointRequest \ - ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8) -#define EndpointOutRequest \ - ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8) - -/* class requests from the USB 2.0 hub spec, table 11-15 */ -/* GetBusState and SetHubDescriptor are optional, omitted */ -#define ClearHubFeature (0x2000 | USB_REQ_CLEAR_FEATURE) -#define ClearPortFeature (0x2300 | USB_REQ_CLEAR_FEATURE) -#define GetHubDescriptor (0xa000 | USB_REQ_GET_DESCRIPTOR) -#define GetHubStatus (0xa000 | USB_REQ_GET_STATUS) -#define GetPortStatus (0xa300 | USB_REQ_GET_STATUS) -#define SetHubFeature (0x2000 | USB_REQ_SET_FEATURE) -#define SetPortFeature (0x2300 | USB_REQ_SET_FEATURE) - - -/*-------------------------------------------------------------------------*/ - -/* - * Generic bandwidth allocation constants/support - */ -#define FRAME_TIME_USECS 1000L -#define BitTime(bytecount) (7 * 8 * bytecount / 6) /* with integer truncation */ - /* Trying not to use worst-case bit-stuffing - * of (7/6 * 8 * bytecount) = 9.33 * bytecount */ - /* bytecount = data payload byte count */ - -#define NS_TO_US(ns) ((ns + 500L) / 1000L) - /* convert & round nanoseconds to microseconds */ - - -/* - * Full/low speed bandwidth allocation constants/support. - */ -#define BW_HOST_DELAY 1000L /* nanoseconds */ -#define BW_HUB_LS_SETUP 333L /* nanoseconds */ - /* 4 full-speed bit times (est.) */ - -#define FRAME_TIME_BITS 12000L /* frame = 1 millisecond */ -#define FRAME_TIME_MAX_BITS_ALLOC (90L * FRAME_TIME_BITS / 100L) -#define FRAME_TIME_MAX_USECS_ALLOC (90L * FRAME_TIME_USECS / 100L) - -/* - * Ceiling [nano/micro]seconds (typical) for that many bytes at high speed - * ISO is a bit less, no ACK ... from USB 2.0 spec, 5.11.3 (and needed - * to preallocate bandwidth) - */ -#define USB2_HOST_DELAY 5 /* nsec, guess */ -#define HS_NSECS(bytes) (((55 * 8 * 2083) \ - + (2083UL * (3 + BitTime(bytes))))/1000 \ - + USB2_HOST_DELAY) -#define HS_NSECS_ISO(bytes) (((38 * 8 * 2083) \ - + (2083UL * (3 + BitTime(bytes))))/1000 \ - + USB2_HOST_DELAY) -#define HS_USECS(bytes) NS_TO_US (HS_NSECS(bytes)) -#define HS_USECS_ISO(bytes) NS_TO_US (HS_NSECS_ISO(bytes)) - -extern long usb_calc_bus_time(int speed, int is_input, - int isoc, int bytecount); - -/*-------------------------------------------------------------------------*/ - -extern void usb_set_device_state(struct usb_device *udev, - enum usb_device_state new_state); - -/*-------------------------------------------------------------------------*/ - -/* exported only within usbcore */ - -extern struct list_head usb_bus_list; -extern struct mutex usb_bus_list_lock; -extern wait_queue_head_t usb_kill_urb_queue; - -extern int usb_find_interface_driver(struct usb_device *dev, - struct usb_interface *interface); - -#define usb_endpoint_out(ep_dir) (!((ep_dir) & USB_DIR_IN)) - -#ifdef CONFIG_PM -extern void usb_root_hub_lost_power(struct usb_device *rhdev); -extern int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg); -extern int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg); -#endif /* CONFIG_PM */ - -#ifdef CONFIG_USB_SUSPEND -extern void usb_hcd_resume_root_hub(struct usb_hcd *hcd); -#else -static inline void usb_hcd_resume_root_hub(struct usb_hcd *hcd) -{ - return; -} -#endif /* CONFIG_USB_SUSPEND */ - - -/* - * USB device fs stuff - */ - -#ifdef CONFIG_USB_DEVICEFS - -/* - * these are expected to be called from the USB core/hub thread - * with the kernel lock held - */ -extern void usbfs_update_special(void); -extern int usbfs_init(void); -extern void usbfs_cleanup(void); - -#else /* CONFIG_USB_DEVICEFS */ - -static inline void usbfs_update_special(void) {} -static inline int usbfs_init(void) { return 0; } -static inline void usbfs_cleanup(void) { } - -#endif /* CONFIG_USB_DEVICEFS */ - -/*-------------------------------------------------------------------------*/ - -#if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE) - -struct usb_mon_operations { - void (*urb_submit)(struct usb_bus *bus, struct urb *urb); - void (*urb_submit_error)(struct usb_bus *bus, struct urb *urb, int err); - void (*urb_complete)(struct usb_bus *bus, struct urb *urb, int status); - /* void (*urb_unlink)(struct usb_bus *bus, struct urb *urb); */ -}; - -extern struct usb_mon_operations *mon_ops; - -static inline void usbmon_urb_submit(struct usb_bus *bus, struct urb *urb) -{ - if (bus->monitored) - (*mon_ops->urb_submit)(bus, urb); -} - -static inline void usbmon_urb_submit_error(struct usb_bus *bus, struct urb *urb, - int error) -{ - if (bus->monitored) - (*mon_ops->urb_submit_error)(bus, urb, error); -} - -static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb, - int status) -{ - if (bus->monitored) - (*mon_ops->urb_complete)(bus, urb, status); -} - -int usb_mon_register(struct usb_mon_operations *ops); -void usb_mon_deregister(void); - -#else - -static inline void usbmon_urb_submit(struct usb_bus *bus, struct urb *urb) {} -static inline void usbmon_urb_submit_error(struct usb_bus *bus, struct urb *urb, - int error) {} -static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb, - int status) {} - -#endif /* CONFIG_USB_MON || CONFIG_USB_MON_MODULE */ - -/*-------------------------------------------------------------------------*/ - -/* hub.h ... DeviceRemovable in 2.4.2-ac11, gone in 2.4.10 */ -/* bleech -- resurfaced in 2.4.11 or 2.4.12 */ -#define bitmap DeviceRemovable - - -/*-------------------------------------------------------------------------*/ - -/* random stuff */ - -#define RUN_CONTEXT (in_irq() ? "in_irq" \ - : (in_interrupt() ? "in_interrupt" : "can sleep")) - - -/* This rwsem is for use only by the hub driver and ehci-hcd. - * Nobody else should touch it. - */ -extern struct rw_semaphore ehci_cf_port_reset_rwsem; - -/* Keep track of which host controller drivers are loaded */ -#define USB_UHCI_LOADED 0 -#define USB_OHCI_LOADED 1 -#define USB_EHCI_LOADED 2 -extern unsigned long usb_hcds_loaded; - -#endif /* __KERNEL__ */ - -#endif /* __USB_CORE_HCD_H */ diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 0940ccd6f4f..83e7bbbe97f 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -19,6 +19,7 @@ #include <linux/ioctl.h> #include <linux/usb.h> #include <linux/usbdevice_fs.h> +#include <linux/usb/hcd.h> #include <linux/kthread.h> #include <linux/mutex.h> #include <linux/freezer.h> @@ -28,8 +29,6 @@ #include <asm/byteorder.h> #include "usb.h" -#include "hcd.h" -#include "hub.h" /* if we are in debug mode, always announce new devices */ #ifdef DEBUG @@ -154,11 +153,11 @@ static int usb_reset_and_verify_device(struct usb_device *udev); static inline char *portspeed(int portstatus) { - if (portstatus & (1 << USB_PORT_FEAT_HIGHSPEED)) + if (portstatus & USB_PORT_STAT_HIGH_SPEED) return "480 Mb/s"; - else if (portstatus & (1 << USB_PORT_FEAT_LOWSPEED)) + else if (portstatus & USB_PORT_STAT_LOW_SPEED) return "1.5 Mb/s"; - else if (portstatus & (1 << USB_PORT_FEAT_SUPERSPEED)) + else if (portstatus & USB_PORT_STAT_SUPER_SPEED) return "5.0 Gb/s"; else return "12 Mb/s"; @@ -745,8 +744,20 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) !(portstatus & USB_PORT_STAT_CONNECTION) || !udev || udev->state == USB_STATE_NOTATTACHED)) { - clear_port_feature(hdev, port1, USB_PORT_FEAT_ENABLE); - portstatus &= ~USB_PORT_STAT_ENABLE; + /* + * USB3 protocol ports will automatically transition + * to Enabled state when detect an USB3.0 device attach. + * Do not disable USB3 protocol ports. + * FIXME: USB3 root hub and external hubs are treated + * differently here. + */ + if (hdev->descriptor.bDeviceProtocol != 3 || + (!hdev->parent && + !(portstatus & USB_PORT_STAT_SUPER_SPEED))) { + clear_port_feature(hdev, port1, + USB_PORT_FEAT_ENABLE); + portstatus &= ~USB_PORT_STAT_ENABLE; + } } /* Clear status-change flags; we'll debounce later */ @@ -1784,7 +1795,6 @@ int usb_new_device(struct usb_device *udev) * sysfs power/wakeup controls wakeup enabled/disabled */ device_init_wakeup(&udev->dev, 0); - device_set_wakeup_enable(&udev->dev, 1); } /* Tell the runtime-PM framework the device is active */ @@ -3038,7 +3048,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, /* maybe switch power back on (e.g. root hub was reset) */ if ((wHubCharacteristics & HUB_CHAR_LPSM) < 2 - && !(portstatus & (1 << USB_PORT_FEAT_POWER))) + && !(portstatus & USB_PORT_STAT_POWER)) set_port_feature(hdev, port1, USB_PORT_FEAT_POWER); if (portstatus & USB_PORT_STAT_ENABLE) @@ -3076,7 +3086,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, if (!(hcd->driver->flags & HCD_USB3)) udev->speed = USB_SPEED_UNKNOWN; else if ((hdev->parent == NULL) && - (portstatus & (1 << USB_PORT_FEAT_SUPERSPEED))) + (portstatus & USB_PORT_STAT_SUPER_SPEED)) udev->speed = USB_SPEED_SUPER; else udev->speed = USB_SPEED_UNKNOWN; diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h deleted file mode 100644 index de8081f065e..00000000000 --- a/drivers/usb/core/hub.h +++ /dev/null @@ -1,205 +0,0 @@ -#ifndef __LINUX_HUB_H -#define __LINUX_HUB_H - -/* - * Hub protocol and driver data structures. - * - * Some of these are known to the "virtual root hub" code - * in host controller drivers. - */ - -#include <linux/list.h> -#include <linux/workqueue.h> -#include <linux/compiler.h> /* likely()/unlikely() */ - -/* - * Hub request types - */ - -#define USB_RT_HUB (USB_TYPE_CLASS | USB_RECIP_DEVICE) -#define USB_RT_PORT (USB_TYPE_CLASS | USB_RECIP_OTHER) - -/* - * Hub class requests - * See USB 2.0 spec Table 11-16 - */ -#define HUB_CLEAR_TT_BUFFER 8 -#define HUB_RESET_TT 9 -#define HUB_GET_TT_STATE 10 -#define HUB_STOP_TT 11 - -/* - * Hub Class feature numbers - * See USB 2.0 spec Table 11-17 - */ -#define C_HUB_LOCAL_POWER 0 -#define C_HUB_OVER_CURRENT 1 - -/* - * Port feature numbers - * See USB 2.0 spec Table 11-17 - */ -#define USB_PORT_FEAT_CONNECTION 0 -#define USB_PORT_FEAT_ENABLE 1 -#define USB_PORT_FEAT_SUSPEND 2 /* L2 suspend */ -#define USB_PORT_FEAT_OVER_CURRENT 3 -#define USB_PORT_FEAT_RESET 4 -#define USB_PORT_FEAT_L1 5 /* L1 suspend */ -#define USB_PORT_FEAT_POWER 8 -#define USB_PORT_FEAT_LOWSPEED 9 -/* This value was never in Table 11-17 */ -#define USB_PORT_FEAT_HIGHSPEED 10 -/* This value is also fake */ -#define USB_PORT_FEAT_SUPERSPEED 11 -#define USB_PORT_FEAT_C_CONNECTION 16 -#define USB_PORT_FEAT_C_ENABLE 17 -#define USB_PORT_FEAT_C_SUSPEND 18 -#define USB_PORT_FEAT_C_OVER_CURRENT 19 -#define USB_PORT_FEAT_C_RESET 20 -#define USB_PORT_FEAT_TEST 21 -#define USB_PORT_FEAT_INDICATOR 22 -#define USB_PORT_FEAT_C_PORT_L1 23 - -/* - * Hub Status and Hub Change results - * See USB 2.0 spec Table 11-19 and Table 11-20 - */ -struct usb_port_status { - __le16 wPortStatus; - __le16 wPortChange; -} __attribute__ ((packed)); - -/* - * wPortStatus bit field - * See USB 2.0 spec Table 11-21 - */ -#define USB_PORT_STAT_CONNECTION 0x0001 -#define USB_PORT_STAT_ENABLE 0x0002 -#define USB_PORT_STAT_SUSPEND 0x0004 -#define USB_PORT_STAT_OVERCURRENT 0x0008 -#define USB_PORT_STAT_RESET 0x0010 -#define USB_PORT_STAT_L1 0x0020 -/* bits 6 to 7 are reserved */ -#define USB_PORT_STAT_POWER 0x0100 -#define USB_PORT_STAT_LOW_SPEED 0x0200 -#define USB_PORT_STAT_HIGH_SPEED 0x0400 -#define USB_PORT_STAT_TEST 0x0800 -#define USB_PORT_STAT_INDICATOR 0x1000 -/* bits 13 to 15 are reserved */ - -/* - * wPortChange bit field - * See USB 2.0 spec Table 11-22 - * Bits 0 to 4 shown, bits 5 to 15 are reserved - */ -#define USB_PORT_STAT_C_CONNECTION 0x0001 -#define USB_PORT_STAT_C_ENABLE 0x0002 -#define USB_PORT_STAT_C_SUSPEND 0x0004 -#define USB_PORT_STAT_C_OVERCURRENT 0x0008 -#define USB_PORT_STAT_C_RESET 0x0010 -#define USB_PORT_STAT_C_L1 0x0020 - -/* - * wHubCharacteristics (masks) - * See USB 2.0 spec Table 11-13, offset 3 - */ -#define HUB_CHAR_LPSM 0x0003 /* D1 .. D0 */ -#define HUB_CHAR_COMPOUND 0x0004 /* D2 */ -#define HUB_CHAR_OCPM 0x0018 /* D4 .. D3 */ -#define HUB_CHAR_TTTT 0x0060 /* D6 .. D5 */ -#define HUB_CHAR_PORTIND 0x0080 /* D7 */ - -struct usb_hub_status { - __le16 wHubStatus; - __le16 wHubChange; -} __attribute__ ((packed)); - -/* - * Hub Status & Hub Change bit masks - * See USB 2.0 spec Table 11-19 and Table 11-20 - * Bits 0 and 1 for wHubStatus and wHubChange - * Bits 2 to 15 are reserved for both - */ -#define HUB_STATUS_LOCAL_POWER 0x0001 -#define HUB_STATUS_OVERCURRENT 0x0002 -#define HUB_CHANGE_LOCAL_POWER 0x0001 -#define HUB_CHANGE_OVERCURRENT 0x0002 - - -/* - * Hub descriptor - * See USB 2.0 spec Table 11-13 - */ - -#define USB_DT_HUB (USB_TYPE_CLASS | 0x09) -#define USB_DT_HUB_NONVAR_SIZE 7 - -struct usb_hub_descriptor { - __u8 bDescLength; - __u8 bDescriptorType; - __u8 bNbrPorts; - __le16 wHubCharacteristics; - __u8 bPwrOn2PwrGood; - __u8 bHubContrCurrent; - /* add 1 bit for hub status change; round to bytes */ - __u8 DeviceRemovable[(USB_MAXCHILDREN + 1 + 7) / 8]; - __u8 PortPwrCtrlMask[(USB_MAXCHILDREN + 1 + 7) / 8]; -} __attribute__ ((packed)); - - -/* port indicator status selectors, tables 11-7 and 11-25 */ -#define HUB_LED_AUTO 0 -#define HUB_LED_AMBER 1 -#define HUB_LED_GREEN 2 -#define HUB_LED_OFF 3 - -enum hub_led_mode { - INDICATOR_AUTO = 0, - INDICATOR_CYCLE, - /* software blinks for attention: software, hardware, reserved */ - INDICATOR_GREEN_BLINK, INDICATOR_GREEN_BLINK_OFF, - INDICATOR_AMBER_BLINK, INDICATOR_AMBER_BLINK_OFF, - INDICATOR_ALT_BLINK, INDICATOR_ALT_BLINK_OFF -} __attribute__ ((packed)); - -struct usb_device; - -/* Transaction Translator Think Times, in bits */ -#define HUB_TTTT_8_BITS 0x00 -#define HUB_TTTT_16_BITS 0x20 -#define HUB_TTTT_24_BITS 0x40 -#define HUB_TTTT_32_BITS 0x60 - -/* - * As of USB 2.0, full/low speed devices are segregated into trees. - * One type grows from USB 1.1 host controllers (OHCI, UHCI etc). - * The other type grows from high speed hubs when they connect to - * full/low speed devices using "Transaction Translators" (TTs). - * - * TTs should only be known to the hub driver, and high speed bus - * drivers (only EHCI for now). They affect periodic scheduling and - * sometimes control/bulk error recovery. - */ -struct usb_tt { - struct usb_device *hub; /* upstream highspeed hub */ - int multi; /* true means one TT per port */ - unsigned think_time; /* think time in ns */ - - /* for control/bulk error recovery (CLEAR_TT_BUFFER) */ - spinlock_t lock; - struct list_head clear_list; /* of usb_tt_clear */ - struct work_struct clear_work; -}; - -struct usb_tt_clear { - struct list_head clear_list; - unsigned tt; - u16 devinfo; - struct usb_hcd *hcd; - struct usb_host_endpoint *ep; -}; - -extern int usb_hub_clear_tt_buffer(struct urb *urb); -extern void usb_ep0_reinit(struct usb_device *); - -#endif /* __LINUX_HUB_H */ diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c index 97b40ce133f..1a27618b67d 100644 --- a/drivers/usb/core/inode.c +++ b/drivers/usb/core/inode.c @@ -40,9 +40,9 @@ #include <linux/notifier.h> #include <linux/seq_file.h> #include <linux/smp_lock.h> +#include <linux/usb/hcd.h> #include <asm/byteorder.h> #include "usb.h" -#include "hcd.h" #define USBFS_DEFAULT_DEVMODE (S_IWUSR | S_IRUGO) #define USBFS_DEFAULT_BUSMODE (S_IXUGO | S_IRUGO) @@ -380,6 +380,7 @@ static int usbfs_rmdir(struct inode *dir, struct dentry *dentry) mutex_lock(&inode->i_mutex); dentry_unhash(dentry); if (usbfs_empty(dentry)) { + dont_mount(dentry); drop_nlink(dentry->d_inode); drop_nlink(dentry->d_inode); dput(dentry); @@ -515,13 +516,13 @@ static int fs_create_by_name (const char *name, mode_t mode, *dentry = NULL; mutex_lock(&parent->d_inode->i_mutex); *dentry = lookup_one_len(name, parent, strlen(name)); - if (!IS_ERR(dentry)) { + if (!IS_ERR(*dentry)) { if ((mode & S_IFMT) == S_IFDIR) error = usbfs_mkdir (parent->d_inode, *dentry, mode); else error = usbfs_create (parent->d_inode, *dentry, mode); } else - error = PTR_ERR(dentry); + error = PTR_ERR(*dentry); mutex_unlock(&parent->d_inode->i_mutex); return error; diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index cd220277c6c..a73e08fdab3 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -14,9 +14,9 @@ #include <linux/device.h> #include <linux/scatterlist.h> #include <linux/usb/quirks.h> +#include <linux/usb/hcd.h> /* for usbcore internals */ #include <asm/byteorder.h> -#include "hcd.h" /* for usbcore internals */ #include "usb.h" static void cancel_async_set_config(struct usb_device *udev); @@ -226,8 +226,7 @@ int usb_bulk_msg(struct usb_device *usb_dev, unsigned int pipe, struct urb *urb; struct usb_host_endpoint *ep; - ep = (usb_pipein(pipe) ? usb_dev->ep_in : usb_dev->ep_out) - [usb_pipeendpoint(pipe)]; + ep = usb_pipe_endpoint(usb_dev, pipe); if (!ep || len < 0) return -EINVAL; @@ -259,9 +258,6 @@ static void sg_clean(struct usb_sg_request *io) kfree(io->urbs); io->urbs = NULL; } - if (io->dev->dev.dma_mask != NULL) - usb_buffer_unmap_sg(io->dev, usb_pipein(io->pipe), - io->sg, io->nents); io->dev = NULL; } @@ -364,7 +360,6 @@ int usb_sg_init(struct usb_sg_request *io, struct usb_device *dev, { int i; int urb_flags; - int dma; int use_sg; if (!io || !dev || !sg @@ -376,114 +371,76 @@ int usb_sg_init(struct usb_sg_request *io, struct usb_device *dev, spin_lock_init(&io->lock); io->dev = dev; io->pipe = pipe; - io->sg = sg; - io->nents = nents; - - /* not all host controllers use DMA (like the mainstream pci ones); - * they can use PIO (sl811) or be software over another transport. - */ - dma = (dev->dev.dma_mask != NULL); - if (dma) - io->entries = usb_buffer_map_sg(dev, usb_pipein(pipe), - sg, nents); - else - io->entries = nents; - - /* initialize all the urbs we'll use */ - if (io->entries <= 0) - return io->entries; if (dev->bus->sg_tablesize > 0) { - io->urbs = kmalloc(sizeof *io->urbs, mem_flags); use_sg = true; + io->entries = 1; } else { - io->urbs = kmalloc(io->entries * sizeof *io->urbs, mem_flags); use_sg = false; + io->entries = nents; } + + /* initialize all the urbs we'll use */ + io->urbs = kmalloc(io->entries * sizeof *io->urbs, mem_flags); if (!io->urbs) goto nomem; - urb_flags = 0; - if (dma) - urb_flags |= URB_NO_TRANSFER_DMA_MAP; + urb_flags = URB_NO_INTERRUPT; if (usb_pipein(pipe)) urb_flags |= URB_SHORT_NOT_OK; - if (use_sg) { - io->urbs[0] = usb_alloc_urb(0, mem_flags); - if (!io->urbs[0]) { - io->entries = 0; - goto nomem; - } + for_each_sg(sg, sg, io->entries, i) { + struct urb *urb; + unsigned len; - io->urbs[0]->dev = NULL; - io->urbs[0]->pipe = pipe; - io->urbs[0]->interval = period; - io->urbs[0]->transfer_flags = urb_flags; - - io->urbs[0]->complete = sg_complete; - io->urbs[0]->context = io; - /* A length of zero means transfer the whole sg list */ - io->urbs[0]->transfer_buffer_length = length; - if (length == 0) { - for_each_sg(sg, sg, io->entries, i) { - io->urbs[0]->transfer_buffer_length += - sg_dma_len(sg); - } + urb = usb_alloc_urb(0, mem_flags); + if (!urb) { + io->entries = i; + goto nomem; } - io->urbs[0]->sg = io; - io->urbs[0]->num_sgs = io->entries; - io->entries = 1; - } else { - urb_flags |= URB_NO_INTERRUPT; - for_each_sg(sg, sg, io->entries, i) { - unsigned len; - - io->urbs[i] = usb_alloc_urb(0, mem_flags); - if (!io->urbs[i]) { - io->entries = i; - goto nomem; + io->urbs[i] = urb; + + urb->dev = NULL; + urb->pipe = pipe; + urb->interval = period; + urb->transfer_flags = urb_flags; + urb->complete = sg_complete; + urb->context = io; + urb->sg = sg; + + if (use_sg) { + /* There is no single transfer buffer */ + urb->transfer_buffer = NULL; + urb->num_sgs = nents; + + /* A length of zero means transfer the whole sg list */ + len = length; + if (len == 0) { + for_each_sg(sg, sg, nents, i) + len += sg->length; } - - io->urbs[i]->dev = NULL; - io->urbs[i]->pipe = pipe; - io->urbs[i]->interval = period; - io->urbs[i]->transfer_flags = urb_flags; - - io->urbs[i]->complete = sg_complete; - io->urbs[i]->context = io; - + } else { /* - * Some systems need to revert to PIO when DMA is temporarily - * unavailable. For their sakes, both transfer_buffer and - * transfer_dma are set when possible. - * - * Note that if IOMMU coalescing occurred, we cannot - * trust sg_page anymore, so check if S/G list shrunk. + * Some systems can't use DMA; they use PIO instead. + * For their sakes, transfer_buffer is set whenever + * possible. */ - if (io->nents == io->entries && !PageHighMem(sg_page(sg))) - io->urbs[i]->transfer_buffer = sg_virt(sg); + if (!PageHighMem(sg_page(sg))) + urb->transfer_buffer = sg_virt(sg); else - io->urbs[i]->transfer_buffer = NULL; - - if (dma) { - io->urbs[i]->transfer_dma = sg_dma_address(sg); - len = sg_dma_len(sg); - } else { - /* hc may use _only_ transfer_buffer */ - len = sg->length; - } + urb->transfer_buffer = NULL; + len = sg->length; if (length) { len = min_t(unsigned, len, length); length -= len; if (length == 0) io->entries = i + 1; } - io->urbs[i]->transfer_buffer_length = len; } - io->urbs[--i]->transfer_flags &= ~URB_NO_INTERRUPT; + urb->transfer_buffer_length = len; } + io->urbs[--i]->transfer_flags &= ~URB_NO_INTERRUPT; /* transaction state */ io->count = io->entries; diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index f073c5cb4e7..f22d03df8b1 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -71,6 +71,10 @@ static const struct usb_device_id usb_quirk_list[] = { /* SKYMEDI USB_DRIVE */ { USB_DEVICE(0x1516, 0x8628), .driver_info = USB_QUIRK_RESET_RESUME }, + /* BUILDWIN Photo Frame */ + { USB_DEVICE(0x1908, 0x1315), .driver_info = + USB_QUIRK_HONOR_BNUMINTERFACES }, + /* INTEL VALUE SSD */ { USB_DEVICE(0x8086, 0xf1a5), .driver_info = USB_QUIRK_RESET_RESUME }, diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index 43c002e3a9a..448f5b47fc4 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -383,13 +383,24 @@ static DEVICE_ATTR(autosuspend, S_IRUGO | S_IWUSR, static const char on_string[] = "on"; static const char auto_string[] = "auto"; +static void warn_level(void) { + static int level_warned; + + if (!level_warned) { + level_warned = 1; + printk(KERN_WARNING "WARNING! power/level is deprecated; " + "use power/control instead\n"); + } +} + static ssize_t show_level(struct device *dev, struct device_attribute *attr, char *buf) { struct usb_device *udev = to_usb_device(dev); const char *p = auto_string; - if (udev->state != USB_STATE_SUSPENDED && udev->autosuspend_disabled) + warn_level(); + if (udev->state != USB_STATE_SUSPENDED && !udev->dev.power.runtime_auto) p = on_string; return sprintf(buf, "%s\n", p); } @@ -401,8 +412,9 @@ set_level(struct device *dev, struct device_attribute *attr, struct usb_device *udev = to_usb_device(dev); int len = count; char *cp; - int rc; + int rc = count; + warn_level(); cp = memchr(buf, '\n', count); if (cp) len = cp - buf; @@ -411,17 +423,17 @@ set_level(struct device *dev, struct device_attribute *attr, if (len == sizeof on_string - 1 && strncmp(buf, on_string, len) == 0) - rc = usb_disable_autosuspend(udev); + usb_disable_autosuspend(udev); else if (len == sizeof auto_string - 1 && strncmp(buf, auto_string, len) == 0) - rc = usb_enable_autosuspend(udev); + usb_enable_autosuspend(udev); else rc = -EINVAL; usb_unlock_device(udev); - return (rc < 0 ? rc : count); + return rc; } static DEVICE_ATTR(level, S_IRUGO | S_IWUSR, show_level, set_level); @@ -646,7 +658,8 @@ const struct attribute_group *usb_device_groups[] = { /* Binary descriptors */ static ssize_t -read_descriptors(struct kobject *kobj, struct bin_attribute *attr, +read_descriptors(struct file *filp, struct kobject *kobj, + struct bin_attribute *attr, char *buf, loff_t off, size_t count) { struct device *dev = container_of(kobj, struct device, kobj); diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c index 45a32dadb40..7c0555548ac 100644 --- a/drivers/usb/core/urb.c +++ b/drivers/usb/core/urb.c @@ -6,7 +6,7 @@ #include <linux/log2.h> #include <linux/usb.h> #include <linux/wait.h> -#include "hcd.h" +#include <linux/usb/hcd.h> #define to_urb(d) container_of(d, struct urb, kref) @@ -308,8 +308,7 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags) * will be required to set urb->ep directly and we will eliminate * urb->pipe. */ - ep = (usb_pipein(urb->pipe) ? dev->ep_in : dev->ep_out) - [usb_pipeendpoint(urb->pipe)]; + ep = usb_pipe_endpoint(dev, urb->pipe); if (!ep) return -ENOENT; @@ -333,9 +332,12 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags) is_out = usb_endpoint_dir_out(&ep->desc); } - /* Cache the direction for later use */ - urb->transfer_flags = (urb->transfer_flags & ~URB_DIR_MASK) | - (is_out ? URB_DIR_OUT : URB_DIR_IN); + /* Clear the internal flags and cache the direction for later use */ + urb->transfer_flags &= ~(URB_DIR_MASK | URB_DMA_MAP_SINGLE | + URB_DMA_MAP_PAGE | URB_DMA_MAP_SG | URB_MAP_LOCAL | + URB_SETUP_MAP_SINGLE | URB_SETUP_MAP_LOCAL | + URB_DMA_SG_COMBINED); + urb->transfer_flags |= (is_out ? URB_DIR_OUT : URB_DIR_IN); if (xfertype != USB_ENDPOINT_XFER_CONTROL && dev->state < USB_STATE_CONFIGURED) @@ -396,8 +398,8 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags) return -EPIPE; /* The most suitable error code :-) */ /* enforce simple/standard policy */ - allowed = (URB_NO_TRANSFER_DMA_MAP | URB_NO_SETUP_DMA_MAP | - URB_NO_INTERRUPT | URB_DIR_MASK | URB_FREE_BUFFER); + allowed = (URB_NO_TRANSFER_DMA_MAP | URB_NO_INTERRUPT | URB_DIR_MASK | + URB_FREE_BUFFER); switch (xfertype) { case USB_ENDPOINT_XFER_BULK: if (is_out) diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 1297e9b16a5..5ae14f6c1e7 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -32,6 +32,7 @@ #include <linux/spinlock.h> #include <linux/errno.h> #include <linux/usb.h> +#include <linux/usb/hcd.h> #include <linux/mutex.h> #include <linux/workqueue.h> #include <linux/debugfs.h> @@ -41,7 +42,6 @@ #include <linux/mm.h> #include <linux/dma-mapping.h> -#include "hcd.h" #include "usb.h" @@ -573,7 +573,7 @@ int usb_lock_device_for_reset(struct usb_device *udev, iface->condition == USB_INTERFACE_UNBOUND)) return -EINTR; - while (usb_trylock_device(udev) != 0) { + while (!usb_trylock_device(udev)) { /* If we can't acquire the lock after waiting one second, * we're probably deadlocked */ @@ -593,76 +593,6 @@ int usb_lock_device_for_reset(struct usb_device *udev, } EXPORT_SYMBOL_GPL(usb_lock_device_for_reset); -static struct usb_device *match_device(struct usb_device *dev, - u16 vendor_id, u16 product_id) -{ - struct usb_device *ret_dev = NULL; - int child; - - dev_dbg(&dev->dev, "check for vendor %04x, product %04x ...\n", - le16_to_cpu(dev->descriptor.idVendor), - le16_to_cpu(dev->descriptor.idProduct)); - - /* see if this device matches */ - if ((vendor_id == le16_to_cpu(dev->descriptor.idVendor)) && - (product_id == le16_to_cpu(dev->descriptor.idProduct))) { - dev_dbg(&dev->dev, "matched this device!\n"); - ret_dev = usb_get_dev(dev); - goto exit; - } - - /* look through all of the children of this device */ - for (child = 0; child < dev->maxchild; ++child) { - if (dev->children[child]) { - usb_lock_device(dev->children[child]); - ret_dev = match_device(dev->children[child], - vendor_id, product_id); - usb_unlock_device(dev->children[child]); - if (ret_dev) - goto exit; - } - } -exit: - return ret_dev; -} - -/** - * usb_find_device - find a specific usb device in the system - * @vendor_id: the vendor id of the device to find - * @product_id: the product id of the device to find - * - * Returns a pointer to a struct usb_device if such a specified usb - * device is present in the system currently. The usage count of the - * device will be incremented if a device is found. Make sure to call - * usb_put_dev() when the caller is finished with the device. - * - * If a device with the specified vendor and product id is not found, - * NULL is returned. - */ -struct usb_device *usb_find_device(u16 vendor_id, u16 product_id) -{ - struct list_head *buslist; - struct usb_bus *bus; - struct usb_device *dev = NULL; - - mutex_lock(&usb_bus_list_lock); - for (buslist = usb_bus_list.next; - buslist != &usb_bus_list; - buslist = buslist->next) { - bus = container_of(buslist, struct usb_bus, bus_list); - if (!bus->root_hub) - continue; - usb_lock_device(bus->root_hub); - dev = match_device(bus->root_hub, vendor_id, product_id); - usb_unlock_device(bus->root_hub); - if (dev) - goto exit; - } -exit: - mutex_unlock(&usb_bus_list_lock); - return dev; -} - /** * usb_get_current_frame_number - return current bus frame number * @dev: the device whose bus is being queried @@ -718,7 +648,7 @@ int __usb_get_extra_descriptor(char *buffer, unsigned size, EXPORT_SYMBOL_GPL(__usb_get_extra_descriptor); /** - * usb_buffer_alloc - allocate dma-consistent buffer for URB_NO_xxx_DMA_MAP + * usb_alloc_coherent - allocate dma-consistent buffer for URB_NO_xxx_DMA_MAP * @dev: device the buffer will be used with * @size: requested buffer size * @mem_flags: affect whether allocation may block @@ -737,30 +667,30 @@ EXPORT_SYMBOL_GPL(__usb_get_extra_descriptor); * architectures where CPU caches are not DMA-coherent. On systems without * bus-snooping caches, these buffers are uncached. * - * When the buffer is no longer used, free it with usb_buffer_free(). + * When the buffer is no longer used, free it with usb_free_coherent(). */ -void *usb_buffer_alloc(struct usb_device *dev, size_t size, gfp_t mem_flags, - dma_addr_t *dma) +void *usb_alloc_coherent(struct usb_device *dev, size_t size, gfp_t mem_flags, + dma_addr_t *dma) { if (!dev || !dev->bus) return NULL; return hcd_buffer_alloc(dev->bus, size, mem_flags, dma); } -EXPORT_SYMBOL_GPL(usb_buffer_alloc); +EXPORT_SYMBOL_GPL(usb_alloc_coherent); /** - * usb_buffer_free - free memory allocated with usb_buffer_alloc() + * usb_free_coherent - free memory allocated with usb_alloc_coherent() * @dev: device the buffer was used with * @size: requested buffer size * @addr: CPU address of buffer * @dma: DMA address of buffer * * This reclaims an I/O buffer, letting it be reused. The memory must have - * been allocated using usb_buffer_alloc(), and the parameters must match + * been allocated using usb_alloc_coherent(), and the parameters must match * those provided in that allocation request. */ -void usb_buffer_free(struct usb_device *dev, size_t size, void *addr, - dma_addr_t dma) +void usb_free_coherent(struct usb_device *dev, size_t size, void *addr, + dma_addr_t dma) { if (!dev || !dev->bus) return; @@ -768,14 +698,14 @@ void usb_buffer_free(struct usb_device *dev, size_t size, void *addr, return; hcd_buffer_free(dev->bus, size, addr, dma); } -EXPORT_SYMBOL_GPL(usb_buffer_free); +EXPORT_SYMBOL_GPL(usb_free_coherent); /** * usb_buffer_map - create DMA mapping(s) for an urb * @urb: urb whose transfer_buffer/setup_packet will be mapped * * Return value is either null (indicating no buffer could be mapped), or - * the parameter. URB_NO_TRANSFER_DMA_MAP and URB_NO_SETUP_DMA_MAP are + * the parameter. URB_NO_TRANSFER_DMA_MAP is * added to urb->transfer_flags if the operation succeeds. If the device * is connected to this system through a non-DMA controller, this operation * always succeeds. @@ -803,17 +733,11 @@ struct urb *usb_buffer_map(struct urb *urb) urb->transfer_buffer, urb->transfer_buffer_length, usb_pipein(urb->pipe) ? DMA_FROM_DEVICE : DMA_TO_DEVICE); - if (usb_pipecontrol(urb->pipe)) - urb->setup_dma = dma_map_single(controller, - urb->setup_packet, - sizeof(struct usb_ctrlrequest), - DMA_TO_DEVICE); /* FIXME generic api broken like pci, can't report errors */ /* if (urb->transfer_dma == DMA_ADDR_INVALID) return 0; */ } else urb->transfer_dma = ~0; - urb->transfer_flags |= (URB_NO_TRANSFER_DMA_MAP - | URB_NO_SETUP_DMA_MAP); + urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; return urb; } EXPORT_SYMBOL_GPL(usb_buffer_map); @@ -881,18 +805,13 @@ void usb_buffer_unmap(struct urb *urb) urb->transfer_dma, urb->transfer_buffer_length, usb_pipein(urb->pipe) ? DMA_FROM_DEVICE : DMA_TO_DEVICE); - if (usb_pipecontrol(urb->pipe)) - dma_unmap_single(controller, - urb->setup_dma, - sizeof(struct usb_ctrlrequest), - DMA_TO_DEVICE); } - urb->transfer_flags &= ~(URB_NO_TRANSFER_DMA_MAP - | URB_NO_SETUP_DMA_MAP); + urb->transfer_flags &= ~URB_NO_TRANSFER_DMA_MAP; } EXPORT_SYMBOL_GPL(usb_buffer_unmap); #endif /* 0 */ +#if 0 /** * usb_buffer_map_sg - create scatterlist DMA mapping(s) for an endpoint * @dev: device to which the scatterlist will be mapped @@ -936,6 +855,7 @@ int usb_buffer_map_sg(const struct usb_device *dev, int is_in, is_in ? DMA_FROM_DEVICE : DMA_TO_DEVICE) ? : -ENOMEM; } EXPORT_SYMBOL_GPL(usb_buffer_map_sg); +#endif /* XXX DISABLED, no users currently. If you wish to re-enable this * XXX please determine whether the sync is to transfer ownership of @@ -972,6 +892,7 @@ void usb_buffer_dmasync_sg(const struct usb_device *dev, int is_in, EXPORT_SYMBOL_GPL(usb_buffer_dmasync_sg); #endif +#if 0 /** * usb_buffer_unmap_sg - free DMA mapping(s) for a scatterlist * @dev: device to which the scatterlist will be mapped @@ -997,6 +918,7 @@ void usb_buffer_unmap_sg(const struct usb_device *dev, int is_in, is_in ? DMA_FROM_DEVICE : DMA_TO_DEVICE); } EXPORT_SYMBOL_GPL(usb_buffer_unmap_sg); +#endif /* To disable USB, kernel command line is 'nousb' not 'usbcore.nousb' */ #ifdef MODULE |