1 files changed, 64 insertions, 480 deletions

diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index e80ef946782..13d1d367f7f 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -32,7 +32,6 @@
 #include <linux/spinlock.h>
 #include <linux/errno.h>
 #include <linux/smp_lock.h>
-#include <linux/rwsem.h>
 #include <linux/usb.h>
 
 #include <asm/io.h>
@@ -47,165 +46,7 @@
 const char *usbcore_name = "usbcore";
 
 static int nousb;	/* Disable USB when built into kernel image */
-			/* Not honored on modular build */
 
-static DECLARE_RWSEM(usb_all_devices_rwsem);
-
-
-static int generic_probe (struct device *dev)
-{
-	return 0;
-}
-static int generic_remove (struct device *dev)
-{
-	struct usb_device *udev = to_usb_device(dev);
-
-	/* if this is only an unbind, not a physical disconnect, then
-	 * unconfigure the device */
-	if (udev->state == USB_STATE_CONFIGURED)
-		usb_set_configuration(udev, 0);
-
-	/* in case the call failed or the device was suspended */
-	if (udev->state >= USB_STATE_CONFIGURED)
-		usb_disable_device(udev, 0);
-	return 0;
-}
-
-static struct device_driver usb_generic_driver = {
-	.owner = THIS_MODULE,
-	.name =	"usb",
-	.bus = &usb_bus_type,
-	.probe = generic_probe,
-	.remove = generic_remove,
-};
-
-static int usb_generic_driver_data;
-
-/* called from driver core with usb_bus_type.subsys writelock */
-static int usb_probe_interface(struct device *dev)
-{
-	struct usb_interface * intf = to_usb_interface(dev);
-	struct usb_driver * driver = to_usb_driver(dev->driver);
-	const struct usb_device_id *id;
-	int error = -ENODEV;
-
-	dev_dbg(dev, "%s\n", __FUNCTION__);
-
-	if (!driver->probe)
-		return error;
-	/* FIXME we'd much prefer to just resume it ... */
-	if (interface_to_usbdev(intf)->state == USB_STATE_SUSPENDED)
-		return -EHOSTUNREACH;
-
-	id = usb_match_id (intf, driver->id_table);
-	if (id) {
-		dev_dbg (dev, "%s - got id\n", __FUNCTION__);
-
-		/* Interface "power state" doesn't correspond to any hardware
-		 * state whatsoever.  We use it to record when it's bound to
-		 * a driver that may start I/0:  it's not frozen/quiesced.
-		 */
-		mark_active(intf);
-		intf->condition = USB_INTERFACE_BINDING;
-		error = driver->probe (intf, id);
-		if (error) {
-			mark_quiesced(intf);
-			intf->condition = USB_INTERFACE_UNBOUND;
-		} else
-			intf->condition = USB_INTERFACE_BOUND;
-	}
-
-	return error;
-}
-
-/* called from driver core with usb_bus_type.subsys writelock */
-static int usb_unbind_interface(struct device *dev)
-{
-	struct usb_interface *intf = to_usb_interface(dev);
-	struct usb_driver *driver = to_usb_driver(intf->dev.driver);
-
-	intf->condition = USB_INTERFACE_UNBINDING;
-
-	/* release all urbs for this interface */
-	usb_disable_interface(interface_to_usbdev(intf), intf);
-
-	if (driver && driver->disconnect)
-		driver->disconnect(intf);
-
-	/* reset other interface state */
-	usb_set_interface(interface_to_usbdev(intf),
-			intf->altsetting[0].desc.bInterfaceNumber,
-			0);
-	usb_set_intfdata(intf, NULL);
-	intf->condition = USB_INTERFACE_UNBOUND;
-	mark_quiesced(intf);
-
-	return 0;
-}
-
-/**
- * usb_register - register a USB driver
- * @new_driver: USB operations for the driver
- *
- * Registers a USB driver with the USB core.  The list of unattached
- * interfaces will be rescanned whenever a new driver is added, allowing
- * the new driver to attach to any recognized devices.
- * Returns a negative error code on failure and 0 on success.
- * 
- * NOTE: if you want your driver to use the USB major number, you must call
- * usb_register_dev() to enable that functionality.  This function no longer
- * takes care of that.
- */
-int usb_register(struct usb_driver *new_driver)
-{
-	int retval = 0;
-
-	if (nousb)
-		return -ENODEV;
-
-	new_driver->driver.name = (char *)new_driver->name;
-	new_driver->driver.bus = &usb_bus_type;
-	new_driver->driver.probe = usb_probe_interface;
-	new_driver->driver.remove = usb_unbind_interface;
-	new_driver->driver.owner = new_driver->owner;
-
-	usb_lock_all_devices();
-	retval = driver_register(&new_driver->driver);
-	usb_unlock_all_devices();
-
-	if (!retval) {
-		pr_info("%s: registered new driver %s\n",
-			usbcore_name, new_driver->name);
-		usbfs_update_special();
-	} else {
-		printk(KERN_ERR "%s: error %d registering driver %s\n",
-			usbcore_name, retval, new_driver->name);
-	}
-
-	return retval;
-}
-
-/**
- * usb_deregister - unregister a USB driver
- * @driver: USB operations of the driver to unregister
- * Context: must be able to sleep
- *
- * Unlinks the specified driver from the internal USB driver list.
- * 
- * NOTE: If you called usb_register_dev(), you still need to call
- * usb_deregister_dev() to clean up your driver's allocated minor numbers,
- * this * call will no longer do it for you.
- */
-void usb_deregister(struct usb_driver *driver)
-{
-	pr_info("%s: deregistering driver %s\n", usbcore_name, driver->name);
-
-	usb_lock_all_devices();
-	driver_unregister (&driver->driver);
-	usb_unlock_all_devices();
-
-	usbfs_update_special();
-}
 
 /**
  * usb_ifnum_to_if - get the interface object with a given interface number
@@ -352,151 +193,23 @@ void usb_driver_release_interface(struct usb_driver *driver,
 	mark_quiesced(iface);
 }
 
-/**
- * usb_match_id - find first usb_device_id matching device or interface
- * @interface: the interface of interest
- * @id: array of usb_device_id structures, terminated by zero entry
- *
- * usb_match_id searches an array of usb_device_id's and returns
- * the first one matching the device or interface, or null.
- * This is used when binding (or rebinding) a driver to an interface.
- * Most USB device drivers will use this indirectly, through the usb core,
- * but some layered driver frameworks use it directly.
- * These device tables are exported with MODULE_DEVICE_TABLE, through
- * modutils and "modules.usbmap", to support the driver loading
- * functionality of USB hotplugging.
- *
- * What Matches:
- *
- * The "match_flags" element in a usb_device_id controls which
- * members are used.  If the corresponding bit is set, the
- * value in the device_id must match its corresponding member
- * in the device or interface descriptor, or else the device_id
- * does not match.
- *
- * "driver_info" is normally used only by device drivers,
- * but you can create a wildcard "matches anything" usb_device_id
- * as a driver's "modules.usbmap" entry if you provide an id with
- * only a nonzero "driver_info" field.  If you do this, the USB device
- * driver's probe() routine should use additional intelligence to
- * decide whether to bind to the specified interface.
- * 
- * What Makes Good usb_device_id Tables:
- *
- * The match algorithm is very simple, so that intelligence in
- * driver selection must come from smart driver id records.
- * Unless you have good reasons to use another selection policy,
- * provide match elements only in related groups, and order match
- * specifiers from specific to general.  Use the macros provided
- * for that purpose if you can.
- *
- * The most specific match specifiers use device descriptor
- * data.  These are commonly used with product-specific matches;
- * the USB_DEVICE macro lets you provide vendor and product IDs,
- * and you can also match against ranges of product revisions.
- * These are widely used for devices with application or vendor
- * specific bDeviceClass values.
- *
- * Matches based on device class/subclass/protocol specifications
- * are slightly more general; use the USB_DEVICE_INFO macro, or
- * its siblings.  These are used with single-function devices
- * where bDeviceClass doesn't specify that each interface has
- * its own class. 
- *
- * Matches based on interface class/subclass/protocol are the
- * most general; they let drivers bind to any interface on a
- * multiple-function device.  Use the USB_INTERFACE_INFO
- * macro, or its siblings, to match class-per-interface style 
- * devices (as recorded in bDeviceClass).
- *  
- * Within those groups, remember that not all combinations are
- * meaningful.  For example, don't give a product version range
- * without vendor and product IDs; or specify a protocol without
- * its associated class and subclass.
- */   
-const struct usb_device_id *
-usb_match_id(struct usb_interface *interface, const struct usb_device_id *id)
-{
-	struct usb_host_interface *intf;
-	struct usb_device *dev;
-
-	/* proc_connectinfo in devio.c may call us with id == NULL. */
-	if (id == NULL)
-		return NULL;
-
-	intf = interface->cur_altsetting;
-	dev = interface_to_usbdev(interface);
-
-	/* It is important to check that id->driver_info is nonzero,
-	   since an entry that is all zeroes except for a nonzero
-	   id->driver_info is the way to create an entry that
-	   indicates that the driver want to examine every
-	   device and interface. */
-	for (; id->idVendor || id->bDeviceClass || id->bInterfaceClass ||
-	       id->driver_info; id++) {
-
-		if ((id->match_flags & USB_DEVICE_ID_MATCH_VENDOR) &&
-		    id->idVendor != le16_to_cpu(dev->descriptor.idVendor))
-			continue;
-
-		if ((id->match_flags & USB_DEVICE_ID_MATCH_PRODUCT) &&
-		    id->idProduct != le16_to_cpu(dev->descriptor.idProduct))
-			continue;
-
-		/* No need to test id->bcdDevice_lo != 0, since 0 is never
-		   greater than any unsigned number. */
-		if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_LO) &&
-		    (id->bcdDevice_lo > le16_to_cpu(dev->descriptor.bcdDevice)))
-			continue;
-
-		if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_HI) &&
-		    (id->bcdDevice_hi < le16_to_cpu(dev->descriptor.bcdDevice)))
-			continue;
-
-		if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_CLASS) &&
-		    (id->bDeviceClass != dev->descriptor.bDeviceClass))
-			continue;
-
-		if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_SUBCLASS) &&
-		    (id->bDeviceSubClass!= dev->descriptor.bDeviceSubClass))
-			continue;
-
-		if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_PROTOCOL) &&
-		    (id->bDeviceProtocol != dev->descriptor.bDeviceProtocol))
-			continue;
-
-		if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_CLASS) &&
-		    (id->bInterfaceClass != intf->desc.bInterfaceClass))
-			continue;
-
-		if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_SUBCLASS) &&
-		    (id->bInterfaceSubClass != intf->desc.bInterfaceSubClass))
-			continue;
-
-		if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_PROTOCOL) &&
-		    (id->bInterfaceProtocol != intf->desc.bInterfaceProtocol))
-			continue;
-
-		return id;
-	}
-
-	return NULL;
-}
-
+struct find_interface_arg {
+	int minor;
+	struct usb_interface *interface;
+};
 
 static int __find_interface(struct device * dev, void * data)
 {
-	struct usb_interface ** ret = (struct usb_interface **)data;
-	struct usb_interface * intf = *ret;
-	int *minor = (int *)data;
+	struct find_interface_arg *arg = data;
+	struct usb_interface *intf;
 
 	/* can't look at usb devices, only interfaces */
 	if (dev->driver == &usb_generic_driver)
 		return 0;
 
 	intf = to_usb_interface(dev);
-	if (intf->minor != -1 && intf->minor == *minor) {
-		*ret = intf;
+	if (intf->minor != -1 && intf->minor == arg->minor) {
+		arg->interface = intf;
 		return 1;
 	}
 	return 0;
@@ -513,42 +226,18 @@ static int __find_interface(struct device * dev, void * data)
  */
 struct usb_interface *usb_find_interface(struct usb_driver *drv, int minor)
 {
-	struct usb_interface *intf = (struct usb_interface *)(long)minor;
-	int ret;
-
-	ret = driver_for_each_device(&drv->driver, NULL, &intf, __find_interface);
-
-	return ret ? intf : NULL;
-}
-
-static int usb_device_match (struct device *dev, struct device_driver *drv)
-{
-	struct usb_interface *intf;
-	struct usb_driver *usb_drv;
-	const struct usb_device_id *id;
-
-	/* check for generic driver, which we don't match any device with */
-	if (drv == &usb_generic_driver)
-		return 0;
-
-	intf = to_usb_interface(dev);
-	usb_drv = to_usb_driver(drv);
-	
-	id = usb_match_id (intf, usb_drv->id_table);
-	if (id)
-		return 1;
+	struct find_interface_arg argb;
 
-	return 0;
+	argb.minor = minor;
+	argb.interface = NULL;
+	driver_for_each_device(&drv->driver, NULL, &argb, __find_interface);
+	return argb.interface;
 }
 
-
 #ifdef	CONFIG_HOTPLUG
 
 /*
- * USB hotplugging invokes what /proc/sys/kernel/hotplug says
- * (normally /sbin/hotplug) when USB devices get added or removed.
- *
- * This invokes a user mode policy agent, typically helping to load driver
+ * This sends an uevent to userspace, typically helping to load driver
  * or other modules, configure the device, and more.  Drivers can provide
  * a MODULE_DEVICE_TABLE to help with module loading subtasks.
  *
@@ -557,8 +246,8 @@ static int usb_device_match (struct device *dev, struct device_driver *drv)
  * delays in event delivery.  Use sysfs (and DEVPATH) to make sure the
  * device (and this configuration!) are still present.
  */
-static int usb_hotplug (struct device *dev, char **envp, int num_envp,
-			char *buffer, int buffer_size)
+static int usb_uevent(struct device *dev, char **envp, int num_envp,
+		      char *buffer, int buffer_size)
 {
 	struct usb_interface *intf;
 	struct usb_device *usb_dev;
@@ -570,7 +259,7 @@ static int usb_hotplug (struct device *dev, char **envp, int num_envp,
 		return -ENODEV;
 
 	/* driver is often null here; dev_dbg() would oops */
-	pr_debug ("usb %s: hotplug\n", dev->bus_id);
+	pr_debug ("usb %s: uevent\n", dev->bus_id);
 
 	/* Must check driver_data here, as on remove driver is always NULL */
 	if ((dev->driver == &usb_generic_driver) || 
@@ -597,51 +286,51 @@ static int usb_hotplug (struct device *dev, char **envp, int num_envp,
 	 *
 	 * FIXME reduce hardwired intelligence here
 	 */
-	if (add_hotplug_env_var(envp, num_envp, &i,
-				buffer, buffer_size, &length,
-				"DEVICE=/proc/bus/usb/%03d/%03d",
-				usb_dev->bus->busnum, usb_dev->devnum))
+	if (add_uevent_var(envp, num_envp, &i,
+			   buffer, buffer_size, &length,
+			   "DEVICE=/proc/bus/usb/%03d/%03d",
+			   usb_dev->bus->busnum, usb_dev->devnum))
 		return -ENOMEM;
 #endif
 
 	/* per-device configurations are common */
-	if (add_hotplug_env_var(envp, num_envp, &i,
-				buffer, buffer_size, &length,
-				"PRODUCT=%x/%x/%x",
-				le16_to_cpu(usb_dev->descriptor.idVendor),
-				le16_to_cpu(usb_dev->descriptor.idProduct),
-				le16_to_cpu(usb_dev->descriptor.bcdDevice)))
+	if (add_uevent_var(envp, num_envp, &i,
+			   buffer, buffer_size, &length,
+			   "PRODUCT=%x/%x/%x",
+			   le16_to_cpu(usb_dev->descriptor.idVendor),
+			   le16_to_cpu(usb_dev->descriptor.idProduct),
+			   le16_to_cpu(usb_dev->descriptor.bcdDevice)))
 		return -ENOMEM;
 
 	/* class-based driver binding models */
-	if (add_hotplug_env_var(envp, num_envp, &i,
-				buffer, buffer_size, &length,
-				"TYPE=%d/%d/%d",
-				usb_dev->descriptor.bDeviceClass,
-				usb_dev->descriptor.bDeviceSubClass,
-				usb_dev->descriptor.bDeviceProtocol))
+	if (add_uevent_var(envp, num_envp, &i,
+			   buffer, buffer_size, &length,
+			   "TYPE=%d/%d/%d",
+			   usb_dev->descriptor.bDeviceClass,
+			   usb_dev->descriptor.bDeviceSubClass,
+			   usb_dev->descriptor.bDeviceProtocol))
 		return -ENOMEM;
 
-	if (add_hotplug_env_var(envp, num_envp, &i,
-				buffer, buffer_size, &length,
-				"INTERFACE=%d/%d/%d",
-				alt->desc.bInterfaceClass,
-				alt->desc.bInterfaceSubClass,
-				alt->desc.bInterfaceProtocol))
+	if (add_uevent_var(envp, num_envp, &i,
+			   buffer, buffer_size, &length,
+			   "INTERFACE=%d/%d/%d",
+			   alt->desc.bInterfaceClass,
+			   alt->desc.bInterfaceSubClass,
+			   alt->desc.bInterfaceProtocol))
 		return -ENOMEM;
 
-	if (add_hotplug_env_var(envp, num_envp, &i,
-				buffer, buffer_size, &length,
-				"MODALIAS=usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic%02Xisc%02Xip%02X",
-				le16_to_cpu(usb_dev->descriptor.idVendor),
-				le16_to_cpu(usb_dev->descriptor.idProduct),
-				le16_to_cpu(usb_dev->descriptor.bcdDevice),
-				usb_dev->descriptor.bDeviceClass,
-				usb_dev->descriptor.bDeviceSubClass,
-				usb_dev->descriptor.bDeviceProtocol,
-				alt->desc.bInterfaceClass,
-				alt->desc.bInterfaceSubClass,
-				alt->desc.bInterfaceProtocol))
+	if (add_uevent_var(envp, num_envp, &i,
+			   buffer, buffer_size, &length,
+			   "MODALIAS=usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic%02Xisc%02Xip%02X",
+			   le16_to_cpu(usb_dev->descriptor.idVendor),
+			   le16_to_cpu(usb_dev->descriptor.idProduct),
+			   le16_to_cpu(usb_dev->descriptor.bcdDevice),
+			   usb_dev->descriptor.bDeviceClass,
+			   usb_dev->descriptor.bDeviceSubClass,
+			   usb_dev->descriptor.bDeviceProtocol,
+			   alt->desc.bInterfaceClass,
+			   alt->desc.bInterfaceSubClass,
+			   alt->desc.bInterfaceProtocol))
 		return -ENOMEM;
 
 	envp[i] = NULL;
@@ -651,7 +340,7 @@ static int usb_hotplug (struct device *dev, char **envp, int num_envp,
 
 #else
 
-static int usb_hotplug (struct device *dev, char **envp,
+static int usb_uevent(struct device *dev, char **envp,
 			int num_envp, char *buffer, int buffer_size)
 {
 	return -ENODEV;
@@ -750,12 +439,11 @@ usb_alloc_dev(struct usb_device *parent, struct usb_bus *bus, unsigned port1)
 		/* hub driver sets up TT records */
 	}
 
+	dev->portnum = port1;
 	dev->bus = bus;
 	dev->parent = parent;
 	INIT_LIST_HEAD(&dev->filelist);
 
-	init_MUTEX(&dev->serialize);
-
 	return dev;
 }
 
@@ -828,76 +516,21 @@ void usb_put_intf(struct usb_interface *intf)
 
 /*			USB device locking
  *
- * Although locking USB devices should be straightforward, it is
- * complicated by the way the driver-model core works.  When a new USB
- * driver is registered or unregistered, the core will automatically
- * probe or disconnect all matching interfaces on all USB devices while
- * holding the USB subsystem writelock.  There's no good way for us to
- * tell which devices will be used or to lock them beforehand; our only
- * option is to effectively lock all the USB devices.
- *
- * We do that by using a private rw-semaphore, usb_all_devices_rwsem.
- * When locking an individual device you must first acquire the rwsem's
- * readlock.  When a driver is registered or unregistered the writelock
- * must be held.  These actions are encapsulated in the subroutines
- * below, so all a driver needs to do is call usb_lock_device() and
- * usb_unlock_device().
+ * USB devices and interfaces are locked using the semaphore in their
+ * embedded struct device.  The hub driver guarantees that whenever a
+ * device is connected or disconnected, drivers are called with the
+ * USB device locked as well as their particular interface.
  *
  * Complications arise when several devices are to be locked at the same
  * time.  Only hub-aware drivers that are part of usbcore ever have to
- * do this; nobody else needs to worry about it.  The problem is that
- * usb_lock_device() must not be called to lock a second device since it
- * would acquire the rwsem's readlock reentrantly, leading to deadlock if
- * another thread was waiting for the writelock.  The solution is simple:
- *
- *	When locking more than one device, call usb_lock_device()
- *	to lock the first one.  Lock the others by calling
- *	down(&udev->serialize) directly.
- *
- *	When unlocking multiple devices, use up(&udev->serialize)
- *	to unlock all but the last one.  Unlock the last one by
- *	calling usb_unlock_device().
+ * do this; nobody else needs to worry about it.  The rule for locking
+ * is simple:
  *
  *	When locking both a device and its parent, always lock the
  *	the parent first.
  */
 
 /**
- * usb_lock_device - acquire the lock for a usb device structure
- * @udev: device that's being locked
- *
- * Use this routine when you don't hold any other device locks;
- * to acquire nested inner locks call down(&udev->serialize) directly.
- * This is necessary for proper interaction with usb_lock_all_devices().
- */
-void usb_lock_device(struct usb_device *udev)
-{
-	down_read(&usb_all_devices_rwsem);
-	down(&udev->serialize);
-}
-
-/**
- * usb_trylock_device - attempt to acquire the lock for a usb device structure
- * @udev: device that's being locked
- *
- * Don't use this routine if you already hold a device lock;
- * use down_trylock(&udev->serialize) instead.
- * This is necessary for proper interaction with usb_lock_all_devices().
- *
- * Returns 1 if successful, 0 if contention.
- */
-int usb_trylock_device(struct usb_device *udev)
-{
-	if (!down_read_trylock(&usb_all_devices_rwsem))
-		return 0;
-	if (down_trylock(&udev->serialize)) {
-		up_read(&usb_all_devices_rwsem);
-		return 0;
-	}
-	return 1;
-}
-
-/**
  * usb_lock_device_for_reset - cautiously acquire the lock for a
  *	usb device structure
  * @udev: device that's being locked
@@ -935,7 +568,7 @@ int usb_lock_device_for_reset(struct usb_device *udev,
 		}
 	}
 
-	while (!usb_trylock_device(udev)) {
+	while (usb_trylock_device(udev) != 0) {
 
 		/* If we can't acquire the lock after waiting one second,
 		 * we're probably deadlocked */
@@ -953,39 +586,6 @@ int usb_lock_device_for_reset(struct usb_device *udev,
 	return 1;
 }
 
-/**
- * usb_unlock_device - release the lock for a usb device structure
- * @udev: device that's being unlocked
- *
- * Use this routine when releasing the only device lock you hold;
- * to release inner nested locks call up(&udev->serialize) directly.
- * This is necessary for proper interaction with usb_lock_all_devices().
- */
-void usb_unlock_device(struct usb_device *udev)
-{
-	up(&udev->serialize);
-	up_read(&usb_all_devices_rwsem);
-}
-
-/**
- * usb_lock_all_devices - acquire the lock for all usb device structures
- *
- * This is necessary when registering a new driver or probing a bus,
- * since the driver-model core may try to use any usb_device.
- */
-void usb_lock_all_devices(void)
-{
-	down_write(&usb_all_devices_rwsem);
-}
-
-/**
- * usb_unlock_all_devices - release the lock for all usb device structures
- */
-void usb_unlock_all_devices(void)
-{
-	up_write(&usb_all_devices_rwsem);
-}
-
 
 static struct usb_device *match_device(struct usb_device *dev,
 				       u16 vendor_id, u16 product_id)
@@ -1008,10 +608,10 @@ static struct usb_device *match_device(struct usb_device *dev,
 	/* look through all of the children of this device */
 	for (child = 0; child < dev->maxchild; ++child) {
 		if (dev->children[child]) {
-			down(&dev->children[child]->serialize);
+			usb_lock_device(dev->children[child]);
 			ret_dev = match_device(dev->children[child],
 					       vendor_id, product_id);
-			up(&dev->children[child]->serialize);
+			usb_unlock_device(dev->children[child]);
 			if (ret_dev)
 				goto exit;
 		}
@@ -1491,23 +1091,13 @@ static int usb_generic_resume(struct device *dev)
 struct bus_type usb_bus_type = {
 	.name =		"usb",
 	.match =	usb_device_match,
-	.hotplug =	usb_hotplug,
+	.uevent =	usb_uevent,
 	.suspend =	usb_generic_suspend,
 	.resume =	usb_generic_resume,
 };
 
-#ifndef MODULE
-
-static int __init usb_setup_disable(char *str)
-{
-	nousb = 1;
-	return 1;
-}
-
 /* format to disable USB on kernel command line is: nousb */
-__setup("nousb", usb_setup_disable);
-
-#endif
+__module_param_call("", nousb, param_set_bool, param_get_bool, &nousb, 0444);
 
 /*
  * for external read access to <nousb>
@@ -1598,8 +1188,6 @@ module_exit(usb_exit);
  * driver modules to use.
  */
 
-EXPORT_SYMBOL(usb_register);
-EXPORT_SYMBOL(usb_deregister);
 EXPORT_SYMBOL(usb_disabled);
 
 EXPORT_SYMBOL_GPL(usb_get_intf);
@@ -1610,14 +1198,10 @@ EXPORT_SYMBOL(usb_put_dev);
 EXPORT_SYMBOL(usb_get_dev);
 EXPORT_SYMBOL(usb_hub_tt_clear_buffer);
 
-EXPORT_SYMBOL(usb_lock_device);
-EXPORT_SYMBOL(usb_trylock_device);
 EXPORT_SYMBOL(usb_lock_device_for_reset);
-EXPORT_SYMBOL(usb_unlock_device);
 
 EXPORT_SYMBOL(usb_driver_claim_interface);
 EXPORT_SYMBOL(usb_driver_release_interface);
-EXPORT_SYMBOL(usb_match_id);
 EXPORT_SYMBOL(usb_find_interface);
 EXPORT_SYMBOL(usb_ifnum_to_if);
 EXPORT_SYMBOL(usb_altnum_to_altsetting);