diff options
Diffstat (limited to 'drivers/usb/core/hub.c')
| -rw-r--r-- | drivers/usb/core/hub.c | 97 |
1 files changed, 84 insertions, 13 deletions
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 1af04bdeaf0..a815fd2cc5e 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -39,6 +39,9 @@ #endif #endif +#define USB_VENDOR_GENESYS_LOGIC 0x05e3 +#define HUB_QUIRK_CHECK_PORT_AUTOSUSPEND 0x01 + struct usb_port { struct usb_device *child; struct device dev; @@ -86,6 +89,8 @@ struct usb_hub { unsigned quiescing:1; unsigned disconnected:1; + unsigned quirk_check_port_auto_suspend:1; + unsigned has_indicators:1; u8 indicator[USB_MAXCHILDREN]; struct delayed_work leds; @@ -736,7 +741,6 @@ static void hub_tt_work(struct work_struct *work) struct usb_hub *hub = container_of(work, struct usb_hub, tt.clear_work); unsigned long flags; - int limit = 100; spin_lock_irqsave (&hub->tt.lock, flags); while (!list_empty(&hub->tt.clear_list)) { @@ -746,9 +750,6 @@ static void hub_tt_work(struct work_struct *work) const struct hc_driver *drv; int status; - if (!hub->quiescing && --limit < 0) - break; - next = hub->tt.clear_list.next; clear = list_entry (next, struct usb_tt_clear, clear_list); list_del (&clear->clear_list); @@ -1612,6 +1613,41 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id) desc = intf->cur_altsetting; hdev = interface_to_usbdev(intf); + /* + * Set default autosuspend delay as 0 to speedup bus suspend, + * based on the below considerations: + * + * - Unlike other drivers, the hub driver does not rely on the + * autosuspend delay to provide enough time to handle a wakeup + * event, and the submitted status URB is just to check future + * change on hub downstream ports, so it is safe to do it. + * + * - The patch might cause one or more auto supend/resume for + * below very rare devices when they are plugged into hub + * first time: + * + * devices having trouble initializing, and disconnect + * themselves from the bus and then reconnect a second + * or so later + * + * devices just for downloading firmware, and disconnects + * themselves after completing it + * + * For these quite rare devices, their drivers may change the + * autosuspend delay of their parent hub in the probe() to one + * appropriate value to avoid the subtle problem if someone + * does care it. + * + * - The patch may cause one or more auto suspend/resume on + * hub during running 'lsusb', but it is probably too + * infrequent to worry about. + * + * - Change autosuspend delay of hub can avoid unnecessary auto + * suspend timer for hub, also may decrease power consumption + * of USB bus. + */ + pm_runtime_set_autosuspend_delay(&hdev->dev, 0); + /* Hubs have proper suspend/resume support. */ usb_enable_autosuspend(hdev); @@ -1670,6 +1706,9 @@ descriptor_error: if (hdev->speed == USB_SPEED_HIGH) highspeed_hubs++; + if (id->driver_info & HUB_QUIRK_CHECK_PORT_AUTOSUSPEND) + hub->quirk_check_port_auto_suspend = 1; + if (hub_configure(hub, endpoint) >= 0) return 0; @@ -2012,7 +2051,7 @@ static void show_string(struct usb_device *udev, char *id, char *string) { if (!string) return; - dev_printk(KERN_INFO, &udev->dev, "%s: %s\n", id, string); + dev_info(&udev->dev, "%s: %s\n", id, string); } static void announce_device(struct usb_device *udev) @@ -2879,6 +2918,7 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg) (PMSG_IS_AUTO(msg) ? "auto-" : ""), udev->do_remote_wakeup); usb_set_device_state(udev, USB_STATE_SUSPENDED); + udev->port_is_suspended = 1; msleep(10); } usb_mark_last_busy(hub->hdev); @@ -3043,6 +3083,7 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg) SuspendCleared: if (status == 0) { + udev->port_is_suspended = 0; if (hub_is_superspeed(hub->hdev)) { if (portchange & USB_PORT_STAT_C_LINK_STATE) clear_port_feature(hub->hdev, port1, @@ -3126,6 +3167,21 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg) #endif +static int check_ports_changed(struct usb_hub *hub) +{ + int port1; + + for (port1 = 1; port1 <= hub->hdev->maxchild; ++port1) { + u16 portstatus, portchange; + int status; + + status = hub_port_status(hub, port1, &portstatus, &portchange); + if (!status && portchange) + return 1; + } + return 0; +} + static int hub_suspend(struct usb_interface *intf, pm_message_t msg) { struct usb_hub *hub = usb_get_intfdata (intf); @@ -3144,6 +3200,16 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg) return -EBUSY; } } + + if (hdev->do_remote_wakeup && hub->quirk_check_port_auto_suspend) { + /* check if there are changes pending on hub ports */ + if (check_ports_changed(hub)) { + if (PMSG_IS_AUTO(msg)) + return -EBUSY; + pm_wakeup_event(&hdev->dev, 2000); + } + } + if (hub_is_superspeed(hdev) && hdev->do_remote_wakeup) { /* Enable hub to send remote wakeup for all ports. */ for (port1 = 1; port1 <= hdev->maxchild; port1++) { @@ -3972,6 +4038,9 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, if (retval) goto fail; + if (hcd->phy && !hdev->parent) + usb_phy_notify_connect(hcd->phy, udev->speed); + /* * Some superspeed devices have finished the link training process * and attached to a superspeed hub port, but the device descriptor @@ -4166,8 +4235,12 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, } /* Disconnect any existing devices under this port */ - if (udev) + if (udev) { + if (hcd->phy && !hdev->parent && + !(portstatus & USB_PORT_STAT_CONNECTION)) + usb_phy_notify_disconnect(hcd->phy, udev->speed); usb_disconnect(&hub->ports[port1 - 1]->child); + } clear_bit(port1, hub->change_bits); /* We can forget about a "removed" device when there's a physical @@ -4190,13 +4263,6 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, } } - if (hcd->phy && !hdev->parent) { - if (portstatus & USB_PORT_STAT_CONNECTION) - usb_phy_notify_connect(hcd->phy, port1); - else - usb_phy_notify_disconnect(hcd->phy, port1); - } - /* Return now if debouncing failed or nothing is connected or * the device was "removed". */ @@ -4648,6 +4714,11 @@ static int hub_thread(void *__unused) } static const struct usb_device_id hub_id_table[] = { + { .match_flags = USB_DEVICE_ID_MATCH_VENDOR + | USB_DEVICE_ID_MATCH_INT_CLASS, + .idVendor = USB_VENDOR_GENESYS_LOGIC, + .bInterfaceClass = USB_CLASS_HUB, + .driver_info = HUB_QUIRK_CHECK_PORT_AUTOSUSPEND}, { .match_flags = USB_DEVICE_ID_MATCH_DEV_CLASS, .bDeviceClass = USB_CLASS_HUB}, { .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS, |