1 files changed, 53 insertions, 67 deletions

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 20ecb4cec8d..0940ccd6f4f 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -22,6 +22,7 @@
 #include <linux/kthread.h>
 #include <linux/mutex.h>
 #include <linux/freezer.h>
+#include <linux/pm_runtime.h>
 
 #include <asm/uaccess.h>
 #include <asm/byteorder.h>
@@ -71,7 +72,6 @@ struct usb_hub {
 
 	unsigned		mA_per_port;	/* current for each child */
 
-	unsigned		init_done:1;
 	unsigned		limited_power:1;
 	unsigned		quiescing:1;
 	unsigned		disconnected:1;
@@ -820,7 +820,6 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 	}
  init3:
 	hub->quiescing = 0;
-	hub->init_done = 1;
 
 	status = usb_submit_urb(hub->urb, GFP_NOIO);
 	if (status < 0)
@@ -861,11 +860,6 @@ static void hub_quiesce(struct usb_hub *hub, enum hub_quiescing_type type)
 	int i;
 
 	cancel_delayed_work_sync(&hub->init_work);
-	if (!hub->init_done) {
-		hub->init_done = 1;
-		usb_autopm_put_interface_no_suspend(
-				to_usb_interface(hub->intfdev));
-	}
 
 	/* khubd and related activity won't re-trigger */
 	hub->quiescing = 1;
@@ -1224,6 +1218,9 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	desc = intf->cur_altsetting;
 	hdev = interface_to_usbdev(intf);
 
+	/* Hubs have proper suspend/resume support */
+	usb_enable_autosuspend(hdev);
+
 	if (hdev->level == MAX_TOPO_LEVEL) {
 		dev_err(&intf->dev,
 			"Unsupported bus topology: hub nested too deep\n");
@@ -1402,10 +1399,8 @@ static void recursively_mark_NOTATTACHED(struct usb_device *udev)
 		if (udev->children[i])
 			recursively_mark_NOTATTACHED(udev->children[i]);
 	}
-	if (udev->state == USB_STATE_SUSPENDED) {
-		udev->discon_suspended = 1;
+	if (udev->state == USB_STATE_SUSPENDED)
 		udev->active_duration -= jiffies;
-	}
 	udev->state = USB_STATE_NOTATTACHED;
 }
 
@@ -1448,11 +1443,11 @@ void usb_set_device_state(struct usb_device *udev,
 					|| new_state == USB_STATE_SUSPENDED)
 				;	/* No change to wakeup settings */
 			else if (new_state == USB_STATE_CONFIGURED)
-				device_init_wakeup(&udev->dev,
+				device_set_wakeup_capable(&udev->dev,
 					(udev->actconfig->desc.bmAttributes
 					 & USB_CONFIG_ATT_WAKEUP));
 			else
-				device_init_wakeup(&udev->dev, 0);
+				device_set_wakeup_capable(&udev->dev, 0);
 		}
 		if (udev->state == USB_STATE_SUSPENDED &&
 			new_state != USB_STATE_SUSPENDED)
@@ -1529,31 +1524,15 @@ static void update_address(struct usb_device *udev, int devnum)
 		udev->devnum = devnum;
 }
 
-#ifdef	CONFIG_USB_SUSPEND
-
-static void usb_stop_pm(struct usb_device *udev)
+static void hub_free_dev(struct usb_device *udev)
 {
-	/* Synchronize with the ksuspend thread to prevent any more
-	 * autosuspend requests from being submitted, and decrement
-	 * the parent's count of unsuspended children.
-	 */
-	usb_pm_lock(udev);
-	if (udev->parent && !udev->discon_suspended)
-		usb_autosuspend_device(udev->parent);
-	usb_pm_unlock(udev);
+	struct usb_hcd *hcd = bus_to_hcd(udev->bus);
 
-	/* Stop any autosuspend or autoresume requests already submitted */
-	cancel_delayed_work_sync(&udev->autosuspend);
-	cancel_work_sync(&udev->autoresume);
+	/* Root hubs aren't real devices, so don't free HCD resources */
+	if (hcd->driver->free_dev && udev->parent)
+		hcd->driver->free_dev(hcd, udev);
 }
 
-#else
-
-static inline void usb_stop_pm(struct usb_device *udev)
-{ }
-
-#endif
-
 /**
  * usb_disconnect - disconnect a device (usbcore-internal)
  * @pdev: pointer to device being disconnected
@@ -1622,7 +1601,7 @@ void usb_disconnect(struct usb_device **pdev)
 	*pdev = NULL;
 	spin_unlock_irq(&device_state_lock);
 
-	usb_stop_pm(udev);
+	hub_free_dev(udev);
 
 	put_device(&udev->dev);
 }
@@ -1799,9 +1778,18 @@ int usb_new_device(struct usb_device *udev)
 {
 	int err;
 
-	/* Increment the parent's count of unsuspended children */
-	if (udev->parent)
-		usb_autoresume_device(udev->parent);
+	if (udev->parent) {
+		/* Initialize non-root-hub device wakeup to disabled;
+		 * device (un)configuration controls wakeup capable
+		 * sysfs power/wakeup controls wakeup enabled/disabled
+		 */
+		device_init_wakeup(&udev->dev, 0);
+		device_set_wakeup_enable(&udev->dev, 1);
+	}
+
+	/* Tell the runtime-PM framework the device is active */
+	pm_runtime_set_active(&udev->dev);
+	pm_runtime_enable(&udev->dev);
 
 	usb_detect_quirks(udev);
 	err = usb_enumerate_device(udev);	/* Read descriptors */
@@ -1833,7 +1821,8 @@ int usb_new_device(struct usb_device *udev)
 
 fail:
 	usb_set_device_state(udev, USB_STATE_NOTATTACHED);
-	usb_stop_pm(udev);
+	pm_runtime_disable(&udev->dev);
+	pm_runtime_set_suspended(&udev->dev);
 	return err;
 }
 
@@ -1982,7 +1971,7 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1,
 		if (!(portstatus & USB_PORT_STAT_RESET) &&
 		    (portstatus & USB_PORT_STAT_ENABLE)) {
 			if (hub_is_wusb(hub))
-				udev->speed = USB_SPEED_VARIABLE;
+				udev->speed = USB_SPEED_WIRELESS;
 			else if (portstatus & USB_PORT_STAT_HIGH_SPEED)
 				udev->speed = USB_SPEED_HIGH;
 			else if (portstatus & USB_PORT_STAT_LOW_SPEED)
@@ -2008,7 +1997,9 @@ static int hub_port_reset(struct usb_hub *hub, int port1,
 				struct usb_device *udev, unsigned int delay)
 {
 	int i, status;
+	struct usb_hcd *hcd;
 
+	hcd = bus_to_hcd(udev->bus);
 	/* Block EHCI CF initialization during the port reset.
 	 * Some companion controllers don't like it when they mix.
 	 */
@@ -2036,6 +2027,14 @@ static int hub_port_reset(struct usb_hub *hub, int port1,
 			/* TRSTRCY = 10 ms; plus some extra */
 			msleep(10 + 40);
 			update_address(udev, 0);
+			if (hcd->driver->reset_device) {
+				status = hcd->driver->reset_device(hcd, udev);
+				if (status < 0) {
+					dev_err(&udev->dev, "Cannot reset "
+							"HCD device state\n");
+					break;
+				}
+			}
 			/* FALL THROUGH */
 		case -ENOTCONN:
 		case -ENODEV:
@@ -2381,14 +2380,17 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg)
 }
 
 /* caller has locked udev */
-static int remote_wakeup(struct usb_device *udev)
+int usb_remote_wakeup(struct usb_device *udev)
 {
 	int	status = 0;
 
 	if (udev->state == USB_STATE_SUSPENDED) {
 		dev_dbg(&udev->dev, "usb %sresume\n", "wakeup-");
-		usb_mark_last_busy(udev);
-		status = usb_external_resume_device(udev, PMSG_REMOTE_RESUME);
+		status = usb_autoresume_device(udev);
+		if (status == 0) {
+			/* Let the drivers do their thing, then... */
+			usb_autosuspend_device(udev);
+		}
 	}
 	return status;
 }
@@ -2425,11 +2427,6 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg)
 	return status;
 }
 
-static inline int remote_wakeup(struct usb_device *udev)
-{
-	return 0;
-}
-
 #endif
 
 static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
@@ -2496,11 +2493,6 @@ EXPORT_SYMBOL_GPL(usb_root_hub_lost_power);
 
 #else	/* CONFIG_PM */
 
-static inline int remote_wakeup(struct usb_device *udev)
-{
-	return 0;
-}
-
 #define hub_suspend		NULL
 #define hub_resume		NULL
 #define hub_reset_resume	NULL
@@ -2645,14 +2637,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 
 	mutex_lock(&usb_address0_mutex);
 
-	if ((hcd->driver->flags & HCD_USB3) && udev->config) {
-		/* FIXME this will need special handling by the xHCI driver. */
-		dev_dbg(&udev->dev,
-				"xHCI reset of configured device "
-				"not supported yet.\n");
-		retval = -EINVAL;
-		goto fail;
-	} else if (!udev->config && oldspeed == USB_SPEED_SUPER) {
+	if (!udev->config && oldspeed == USB_SPEED_SUPER) {
 		/* Don't reset USB 3.0 devices during an initial setup */
 		usb_set_device_state(udev, USB_STATE_DEFAULT);
 	} else {
@@ -2678,7 +2663,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 	 */
 	switch (udev->speed) {
 	case USB_SPEED_SUPER:
-	case USB_SPEED_VARIABLE:	/* fixed at 512 */
+	case USB_SPEED_WIRELESS:	/* fixed at 512 */
 		udev->ep0.desc.wMaxPacketSize = cpu_to_le16(512);
 		break;
 	case USB_SPEED_HIGH:		/* fixed at 64 */
@@ -2706,7 +2691,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 	case USB_SPEED_SUPER:
 				speed = "super";
 				break;
-	case USB_SPEED_VARIABLE:
+	case USB_SPEED_WIRELESS:
 				speed = "variable";
 				type = "Wireless ";
 				break;
@@ -3006,7 +2991,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
 			/* For a suspended device, treat this as a
 			 * remote wakeup event.
 			 */
-			status = remote_wakeup(udev);
+			status = usb_remote_wakeup(udev);
 #endif
 
 		} else {
@@ -3192,6 +3177,7 @@ loop_disable:
 loop:
 		usb_ep0_reinit(udev);
 		release_address(udev);
+		hub_free_dev(udev);
 		usb_put_dev(udev);
 		if ((status == -ENOTCONN) || (status == -ENOTSUPP))
 			break;
@@ -3259,7 +3245,7 @@ static void hub_events(void)
 		 * disconnected while waiting for the lock to succeed. */
 		usb_lock_device(hdev);
 		if (unlikely(hub->disconnected))
-			goto loop2;
+			goto loop_disconnected;
 
 		/* If the hub has died, clean up after it */
 		if (hdev->state == USB_STATE_NOTATTACHED) {
@@ -3352,7 +3338,7 @@ static void hub_events(void)
 					msleep(10);
 
 					usb_lock_device(udev);
-					ret = remote_wakeup(hdev->
+					ret = usb_remote_wakeup(hdev->
 							children[i-1]);
 					usb_unlock_device(udev);
 					if (ret < 0)
@@ -3419,7 +3405,7 @@ static void hub_events(void)
 		 * kick_khubd() and allow autosuspend.
 		 */
 		usb_autopm_put_interface(intf);
- loop2:
+ loop_disconnected:
 		usb_unlock_device(hdev);
 		kref_put(&hub->kref, hub_release);
 
@@ -3446,7 +3432,7 @@ static int hub_thread(void *__unused)
 	return 0;
 }
 
-static struct usb_device_id hub_id_table [] = {
+static const struct usb_device_id hub_id_table[] = {
     { .match_flags = USB_DEVICE_ID_MATCH_DEV_CLASS,
       .bDeviceClass = USB_CLASS_HUB},
     { .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS,