1 files changed, 85 insertions, 68 deletions

diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 0018bbc4de3..fbd938d4ea5 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -34,6 +34,7 @@
 #include <asm/scatterlist.h>
 #include <linux/device.h>
 #include <linux/dma-mapping.h>
+#include <linux/mutex.h>
 #include <asm/irq.h>
 #include <asm/byteorder.h>
 
@@ -93,7 +94,7 @@ struct usb_busmap {
 static struct usb_busmap busmap;
 
 /* used when updating list of hcds */
-DECLARE_MUTEX (usb_bus_list_lock);	/* exported only for usbfs */
+DEFINE_MUTEX(usb_bus_list_lock);	/* exported only for usbfs */
 EXPORT_SYMBOL_GPL (usb_bus_list_lock);
 
 /* used for controlling access to virtual root hubs */
@@ -366,21 +367,39 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
 
 	/* DEVICE REQUESTS */
 
+	/* The root hub's remote wakeup enable bit is implemented using
+	 * driver model wakeup flags.  If this system supports wakeup
+	 * through USB, userspace may change the default "allow wakeup"
+	 * policy through sysfs or these calls.
+	 *
+	 * Most root hubs support wakeup from downstream devices, for
+	 * runtime power management (disabling USB clocks and reducing
+	 * VBUS power usage).  However, not all of them do so; silicon,
+	 * board, and BIOS bugs here are not uncommon, so these can't
+	 * be treated quite like external hubs.
+	 *
+	 * Likewise, not all root hubs will pass wakeup events upstream,
+	 * to wake up the whole system.  So don't assume root hub and
+	 * controller capabilities are identical.
+	 */
+
 	case DeviceRequest | USB_REQ_GET_STATUS:
-		tbuf [0] = (hcd->remote_wakeup << USB_DEVICE_REMOTE_WAKEUP)
+		tbuf [0] = (device_may_wakeup(&hcd->self.root_hub->dev)
+					<< USB_DEVICE_REMOTE_WAKEUP)
 				| (1 << USB_DEVICE_SELF_POWERED);
 		tbuf [1] = 0;
 		len = 2;
 		break;
 	case DeviceOutRequest | USB_REQ_CLEAR_FEATURE:
 		if (wValue == USB_DEVICE_REMOTE_WAKEUP)
-			hcd->remote_wakeup = 0;
+			device_set_wakeup_enable(&hcd->self.root_hub->dev, 0);
 		else
 			goto error;
 		break;
 	case DeviceOutRequest | USB_REQ_SET_FEATURE:
-		if (hcd->can_wakeup && wValue == USB_DEVICE_REMOTE_WAKEUP)
-			hcd->remote_wakeup = 1;
+		if (device_can_wakeup(&hcd->self.root_hub->dev)
+				&& wValue == USB_DEVICE_REMOTE_WAKEUP)
+			device_set_wakeup_enable(&hcd->self.root_hub->dev, 1);
 		else
 			goto error;
 		break;
@@ -409,7 +428,7 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
 				bufp = fs_rh_config_descriptor;
 				len = sizeof fs_rh_config_descriptor;
 			}
-			if (hcd->can_wakeup)
+			if (device_can_wakeup(&hcd->self.root_hub->dev))
 				patch_wakeup = 1;
 			break;
 		case USB_DT_STRING << 8:
@@ -761,14 +780,14 @@ static int usb_register_bus(struct usb_bus *bus)
 {
 	int busnum;
 
-	down (&usb_bus_list_lock);
+	mutex_lock(&usb_bus_list_lock);
 	busnum = find_next_zero_bit (busmap.busmap, USB_MAXBUS, 1);
 	if (busnum < USB_MAXBUS) {
 		set_bit (busnum, busmap.busmap);
 		bus->busnum = busnum;
 	} else {
 		printk (KERN_ERR "%s: too many buses\n", usbcore_name);
-		up(&usb_bus_list_lock);
+		mutex_unlock(&usb_bus_list_lock);
 		return -E2BIG;
 	}
 
@@ -776,7 +795,7 @@ static int usb_register_bus(struct usb_bus *bus)
 					     bus->controller, "usb_host%d", busnum);
 	if (IS_ERR(bus->class_dev)) {
 		clear_bit(busnum, busmap.busmap);
-		up(&usb_bus_list_lock);
+		mutex_unlock(&usb_bus_list_lock);
 		return PTR_ERR(bus->class_dev);
 	}
 
@@ -784,7 +803,7 @@ static int usb_register_bus(struct usb_bus *bus)
 
 	/* Add it to the local list of buses */
 	list_add (&bus->bus_list, &usb_bus_list);
-	up (&usb_bus_list_lock);
+	mutex_unlock(&usb_bus_list_lock);
 
 	usb_notify_add_bus(bus);
 
@@ -809,9 +828,9 @@ static void usb_deregister_bus (struct usb_bus *bus)
 	 * controller code, as well as having it call this when cleaning
 	 * itself up
 	 */
-	down (&usb_bus_list_lock);
+	mutex_lock(&usb_bus_list_lock);
 	list_del (&bus->bus_list);
-	up (&usb_bus_list_lock);
+	mutex_unlock(&usb_bus_list_lock);
 
 	usb_notify_remove_bus(bus);
 
@@ -822,18 +841,17 @@ static void usb_deregister_bus (struct usb_bus *bus)
 
 /**
  * register_root_hub - called by usb_add_hcd() to register a root hub
- * @usb_dev: the usb root hub device to be registered.
  * @hcd: host controller for this root hub
  *
  * This function registers the root hub with the USB subsystem.  It sets up
- * the device properly in the device tree and stores the root_hub pointer
- * in the bus structure, then calls usb_new_device() to register the usb
- * device.  It also assigns the root hub's USB address (always 1).
+ * the device properly in the device tree and then calls usb_new_device()
+ * to register the usb device.  It also assigns the root hub's USB address
+ * (always 1).
  */
-static int register_root_hub (struct usb_device *usb_dev,
-		struct usb_hcd *hcd)
+static int register_root_hub(struct usb_hcd *hcd)
 {
 	struct device *parent_dev = hcd->self.controller;
+	struct usb_device *usb_dev = hcd->self.root_hub;
 	const int devnum = 1;
 	int retval;
 
@@ -844,14 +862,12 @@ static int register_root_hub (struct usb_device *usb_dev,
 	set_bit (devnum, usb_dev->bus->devmap.devicemap);
 	usb_set_device_state(usb_dev, USB_STATE_ADDRESS);
 
-	down (&usb_bus_list_lock);
-	usb_dev->bus->root_hub = usb_dev;
+	mutex_lock(&usb_bus_list_lock);
 
 	usb_dev->ep0.desc.wMaxPacketSize = __constant_cpu_to_le16(64);
 	retval = usb_get_device_descriptor(usb_dev, USB_DT_DEVICE_SIZE);
 	if (retval != sizeof usb_dev->descriptor) {
-		usb_dev->bus->root_hub = NULL;
-		up (&usb_bus_list_lock);
+		mutex_unlock(&usb_bus_list_lock);
 		dev_dbg (parent_dev, "can't read %s device descriptor %d\n",
 				usb_dev->dev.bus_id, retval);
 		return (retval < 0) ? retval : -EMSGSIZE;
@@ -859,11 +875,10 @@ static int register_root_hub (struct usb_device *usb_dev,
 
 	retval = usb_new_device (usb_dev);
 	if (retval) {
-		usb_dev->bus->root_hub = NULL;
 		dev_err (parent_dev, "can't register root hub for %s, %d\n",
 				usb_dev->dev.bus_id, retval);
 	}
-	up (&usb_bus_list_lock);
+	mutex_unlock(&usb_bus_list_lock);
 
 	if (retval == 0) {
 		spin_lock_irq (&hcd_root_hub_lock);
@@ -1090,7 +1105,6 @@ static void urb_unlink (struct urb *urb)
 	spin_lock_irqsave (&hcd_data_lock, flags);
 	list_del_init (&urb->urb_list);
 	spin_unlock_irqrestore (&hcd_data_lock, flags);
-	usb_put_dev (urb->dev);
 }
 
 
@@ -1130,7 +1144,6 @@ static int hcd_submit_urb (struct urb *urb, gfp_t mem_flags)
 	case HC_STATE_RUNNING:
 	case HC_STATE_RESUMING:
 doit:
-		usb_get_dev (urb->dev);
 		list_add_tail (&urb->urb_list, &ep->urb_list);
 		status = 0;
 		break;
@@ -1771,12 +1784,10 @@ int usb_add_hcd(struct usb_hcd *hcd,
 
 	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
 
-	/* till now HC has been in an indeterminate state ... */
-	if (hcd->driver->reset && (retval = hcd->driver->reset(hcd)) < 0) {
-		dev_err(hcd->self.controller, "can't reset\n");
-		return retval;
-	}
-
+	/* HC is in reset state, but accessible.  Now do the one-time init,
+	 * bottom up so that hcds can customize the root hubs before khubd
+	 * starts talking to them.  (Note, bus id is assigned early too.)
+	 */
 	if ((retval = hcd_buffer_create(hcd)) != 0) {
 		dev_dbg(hcd->self.controller, "pool alloc failed\n");
 		return retval;
@@ -1785,6 +1796,36 @@ int usb_add_hcd(struct usb_hcd *hcd,
 	if ((retval = usb_register_bus(&hcd->self)) < 0)
 		goto err_register_bus;
 
+	if ((rhdev = usb_alloc_dev(NULL, &hcd->self, 0)) == NULL) {
+		dev_err(hcd->self.controller, "unable to allocate root hub\n");
+		retval = -ENOMEM;
+		goto err_allocate_root_hub;
+	}
+	rhdev->speed = (hcd->driver->flags & HCD_USB2) ? USB_SPEED_HIGH :
+			USB_SPEED_FULL;
+	hcd->self.root_hub = rhdev;
+
+	/* "reset" is misnamed; its role is now one-time init. the controller
+	 * should already have been reset (and boot firmware kicked off etc).
+	 */
+	if (hcd->driver->reset && (retval = hcd->driver->reset(hcd)) < 0) {
+		dev_err(hcd->self.controller, "can't setup\n");
+		goto err_hcd_driver_setup;
+	}
+
+	/* wakeup flag init is in transition; for now we can't rely on PCI to
+	 * initialize these bits properly, so we let reset() override it.
+	 * This init should _precede_ the reset() once PCI behaves.
+	 */
+	device_init_wakeup(&rhdev->dev,
+			device_can_wakeup(hcd->self.controller));
+
+	/* NOTE: root hub and controller capabilities may not be the same */
+	if (device_can_wakeup(hcd->self.controller)
+			&& device_can_wakeup(&hcd->self.root_hub->dev))
+		dev_dbg(hcd->self.controller, "supports USB remote wakeup\n");
+
+	/* enable irqs just before we start the controller */
 	if (hcd->driver->irq) {
 		char	buf[8], *bufp = buf;
 
@@ -1816,56 +1857,32 @@ int usb_add_hcd(struct usb_hcd *hcd,
 					(unsigned long long)hcd->rsrc_start);
 	}
 
-	/* Allocate the root hub before calling hcd->driver->start(),
-	 * but don't register it until afterward so that the hardware
-	 * is running.
-	 */
-	if ((rhdev = usb_alloc_dev(NULL, &hcd->self, 0)) == NULL) {
-		dev_err(hcd->self.controller, "unable to allocate root hub\n");
-		retval = -ENOMEM;
-		goto err_allocate_root_hub;
-	}
-
-	/* Although in principle hcd->driver->start() might need to use rhdev,
-	 * none of the current drivers do.
-	 */
 	if ((retval = hcd->driver->start(hcd)) < 0) {
 		dev_err(hcd->self.controller, "startup error %d\n", retval);
 		goto err_hcd_driver_start;
 	}
 
-	/* hcd->driver->start() reported can_wakeup, probably with
-	 * assistance from board's boot firmware.
-	 * NOTE:  normal devices won't enable wakeup by default.
-	 */
-	if (hcd->can_wakeup)
-		dev_dbg(hcd->self.controller, "supports USB remote wakeup\n");
-	hcd->remote_wakeup = hcd->can_wakeup;
-
-	rhdev->speed = (hcd->driver->flags & HCD_USB2) ? USB_SPEED_HIGH :
-			USB_SPEED_FULL;
+	/* starting here, usbcore will pay attention to this root hub */
 	rhdev->bus_mA = min(500u, hcd->power_budget);
-	if ((retval = register_root_hub(rhdev, hcd)) != 0)
+	if ((retval = register_root_hub(hcd)) != 0)
 		goto err_register_root_hub;
 
 	if (hcd->uses_new_polling && hcd->poll_rh)
 		usb_hcd_poll_rh_status(hcd);
 	return retval;
 
- err_register_root_hub:
+err_register_root_hub:
 	hcd->driver->stop(hcd);
-
- err_hcd_driver_start:
-	usb_put_dev(rhdev);
-
- err_allocate_root_hub:
+err_hcd_driver_start:
 	if (hcd->irq >= 0)
 		free_irq(irqnum, hcd);
-
- err_request_irq:
+err_request_irq:
+err_hcd_driver_setup:
+	hcd->self.root_hub = NULL;
+	usb_put_dev(rhdev);
+err_allocate_root_hub:
 	usb_deregister_bus(&hcd->self);
-
- err_register_bus:
+err_register_bus:
 	hcd_buffer_destroy(hcd);
 	return retval;
 } 
@@ -1891,9 +1908,9 @@ void usb_remove_hcd(struct usb_hcd *hcd)
 	hcd->rh_registered = 0;
 	spin_unlock_irq (&hcd_root_hub_lock);
 
-	down(&usb_bus_list_lock);
+	mutex_lock(&usb_bus_list_lock);
 	usb_disconnect(&hcd->self.root_hub);
-	up(&usb_bus_list_lock);
+	mutex_unlock(&usb_bus_list_lock);
 
 	hcd->poll_rh = 0;
 	del_timer_sync(&hcd->rh_timer);