1 files changed, 11 insertions, 45 deletions

diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index 9333083dd11..b34c81969cb 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -20,7 +20,6 @@
 #include <linux/pm_runtime.h>
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
-#include <linux/usb/otg.h>
 #include <linux/usb/chipidea.h>
 
 #include "ci.h"
@@ -686,9 +685,6 @@ static int _gadget_stop_activity(struct usb_gadget *gadget)
 	usb_ep_fifo_flush(&ci->ep0out->ep);
 	usb_ep_fifo_flush(&ci->ep0in->ep);
 
-	if (ci->driver)
-		ci->driver->disconnect(gadget);
-
 	/* make sure to disable all endpoints */
 	gadget_for_each_ep(ep, gadget) {
 		usb_ep_disable(ep);
@@ -718,6 +714,11 @@ __acquires(ci->lock)
 	int retval;
 
 	spin_unlock(&ci->lock);
+	if (ci->gadget.speed != USB_SPEED_UNKNOWN) {
+		if (ci->driver)
+			ci->driver->disconnect(&ci->gadget);
+	}
+
 	retval = _gadget_stop_activity(&ci->gadget);
 	if (retval)
 		goto done;
@@ -1461,6 +1462,8 @@ static int ci_udc_vbus_session(struct usb_gadget *_gadget, int is_active)
 			hw_device_state(ci, ci->ep0out->qh.dma);
 			dev_dbg(ci->dev, "Connected to host\n");
 		} else {
+			if (ci->driver)
+				ci->driver->disconnect(&ci->gadget);
 			hw_device_state(ci, 0);
 			if (ci->platdata->notify_event)
 				ci->platdata->notify_event(ci,
@@ -1633,23 +1636,22 @@ static int ci_udc_start(struct usb_gadget *gadget,
 	retval = usb_ep_enable(&ci->ep0in->ep);
 	if (retval)
 		return retval;
-	spin_lock_irqsave(&ci->lock, flags);
 
 	ci->driver = driver;
 	pm_runtime_get_sync(&ci->gadget.dev);
 	if (ci->vbus_active) {
+		spin_lock_irqsave(&ci->lock, flags);
 		hw_device_reset(ci, USBMODE_CM_DC);
 	} else {
 		pm_runtime_put_sync(&ci->gadget.dev);
-		goto done;
+		return retval;
 	}
 
 	retval = hw_device_state(ci, ci->ep0out->qh.dma);
+	spin_unlock_irqrestore(&ci->lock, flags);
 	if (retval)
 		pm_runtime_put_sync(&ci->gadget.dev);
 
- done:
-	spin_unlock_irqrestore(&ci->lock, flags);
 	return retval;
 }
 
@@ -1786,34 +1788,9 @@ static int udc_start(struct ci_hdrc *ci)
 
 	ci->gadget.ep0 = &ci->ep0in->ep;
 
-	if (ci->global_phy) {
-		ci->transceiver = usb_get_phy(USB_PHY_TYPE_USB2);
-		if (IS_ERR(ci->transceiver))
-			ci->transceiver = NULL;
-	}
-
-	if (ci->platdata->flags & CI_HDRC_REQUIRE_TRANSCEIVER) {
-		if (ci->transceiver == NULL) {
-			retval = -ENODEV;
-			goto destroy_eps;
-		}
-	}
-
-	if (ci->transceiver) {
-		retval = otg_set_peripheral(ci->transceiver->otg,
-						&ci->gadget);
-		/*
-		 * If we implement all USB functions using chipidea drivers,
-		 * it doesn't need to call above API, meanwhile, if we only
-		 * use gadget function, calling above API is useless.
-		 */
-		if (retval && retval != -ENOTSUPP)
-			goto put_transceiver;
-	}
-
 	retval = usb_add_gadget_udc(dev, &ci->gadget);
 	if (retval)
-		goto remove_trans;
+		goto destroy_eps;
 
 	pm_runtime_no_callbacks(&ci->gadget.dev);
 	pm_runtime_enable(&ci->gadget.dev);
@@ -1823,17 +1800,6 @@ static int udc_start(struct ci_hdrc *ci)
 
 	return retval;
 
-remove_trans:
-	if (ci->transceiver) {
-		otg_set_peripheral(ci->transceiver->otg, NULL);
-		if (ci->global_phy)
-			usb_put_phy(ci->transceiver);
-	}
-
-	dev_err(dev, "error = %i\n", retval);
-put_transceiver:
-	if (ci->transceiver && ci->global_phy)
-		usb_put_phy(ci->transceiver);
 destroy_eps:
 	destroy_eps(ci);
 free_pools: