diff options
Diffstat (limited to 'drivers/tty')
83 files changed, 3238 insertions, 2507 deletions
diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c index b84c83456dc..24145c30c9b 100644 --- a/drivers/tty/amiserial.c +++ b/drivers/tty/amiserial.c @@ -45,7 +45,7 @@ #if defined(MODULE) && defined(SERIAL_DEBUG_MCOUNT) #define DBG_CNT(s) printk("(%s): [%x] refc=%d, serc=%d, ttyc=%d -> %s\n", \ - tty->name, (info->flags), serial_driver->refcount,info->count,tty->count,s) + tty->name, (info->tport.flags), serial_driver->refcount,info->count,tty->count,s) #else #define DBG_CNT(s) #endif @@ -58,7 +58,6 @@ #include <linux/types.h> #include <linux/serial.h> -#include <linux/serialP.h> #include <linux/serial_reg.h> static char *serial_version = "4.30"; @@ -70,6 +69,7 @@ static char *serial_version = "4.30"; #include <linux/interrupt.h> #include <linux/tty.h> #include <linux/tty_flip.h> +#include <linux/circ_buf.h> #include <linux/console.h> #include <linux/major.h> #include <linux/string.h> @@ -85,13 +85,30 @@ static char *serial_version = "4.30"; #include <asm/setup.h> -#include <asm/system.h> #include <asm/irq.h> #include <asm/amigahw.h> #include <asm/amigaints.h> +struct serial_state { + struct tty_port tport; + struct circ_buf xmit; + struct async_icount icount; + + unsigned long port; + int baud_base; + int xmit_fifo_size; + int custom_divisor; + int read_status_mask; + int ignore_status_mask; + int timeout; + int quot; + int IER; /* Interrupt Enable Register */ + int MCR; /* Modem control register */ + int x_char; /* xon/xoff character */ +}; + #define custom amiga_custom static char *serial_name = "Amiga-builtin serial driver"; @@ -100,11 +117,10 @@ static struct tty_driver *serial_driver; /* number of characters left in xmit buffer before we ask for more */ #define WAKEUP_CHARS 256 -static struct async_struct *IRQ_ports; - static unsigned char current_ctl_bits; -static void change_speed(struct async_struct *info, struct ktermios *old); +static void change_speed(struct tty_struct *tty, struct serial_state *info, + struct ktermios *old); static void rs_wait_until_sent(struct tty_struct *tty, int timeout); @@ -117,7 +133,7 @@ static struct serial_state rs_table[1]; #define serial_isroot() (capable(CAP_SYS_ADMIN)) -static inline int serial_paranoia_check(struct async_struct *info, +static inline int serial_paranoia_check(struct serial_state *info, char *name, const char *routine) { #ifdef SERIAL_PARANOIA_CHECK @@ -170,7 +186,7 @@ static __inline__ void rtsdtr_ctrl(int bits) */ static void rs_stop(struct tty_struct *tty) { - struct async_struct *info = tty->driver_data; + struct serial_state *info = tty->driver_data; unsigned long flags; if (serial_paranoia_check(info, tty->name, "rs_stop")) @@ -190,7 +206,7 @@ static void rs_stop(struct tty_struct *tty) static void rs_start(struct tty_struct *tty) { - struct async_struct *info = tty->driver_data; + struct serial_state *info = tty->driver_data; unsigned long flags; if (serial_paranoia_check(info, tty->name, "rs_start")) @@ -231,27 +247,16 @@ static void rs_start(struct tty_struct *tty) * ----------------------------------------------------------------------- */ -/* - * This routine is used by the interrupt handler to schedule - * processing in the software interrupt portion of the driver. - */ -static void rs_sched_event(struct async_struct *info, - int event) -{ - info->event |= 1 << event; - tasklet_schedule(&info->tlet); -} - -static void receive_chars(struct async_struct *info) +static void receive_chars(struct serial_state *info) { int status; int serdatr; - struct tty_struct *tty = info->tty; + struct tty_struct *tty = info->tport.tty; unsigned char ch, flag; struct async_icount *icount; int oe = 0; - icount = &info->state->icount; + icount = &info->icount; status = UART_LSR_DR; /* We obviously have a character! */ serdatr = custom.serdatr; @@ -308,7 +313,7 @@ static void receive_chars(struct async_struct *info) printk("handling break...."); #endif flag = TTY_BREAK; - if (info->flags & ASYNC_SAK) + if (info->tport.flags & ASYNC_SAK) do_SAK(tty); } else if (status & UART_LSR_PE) flag = TTY_PARITY; @@ -331,20 +336,20 @@ out: return; } -static void transmit_chars(struct async_struct *info) +static void transmit_chars(struct serial_state *info) { custom.intreq = IF_TBE; mb(); if (info->x_char) { custom.serdat = info->x_char | 0x100; mb(); - info->state->icount.tx++; + info->icount.tx++; info->x_char = 0; return; } if (info->xmit.head == info->xmit.tail - || info->tty->stopped - || info->tty->hw_stopped) { + || info->tport.tty->stopped + || info->tport.tty->hw_stopped) { info->IER &= ~UART_IER_THRI; custom.intena = IF_TBE; mb(); @@ -354,12 +359,12 @@ static void transmit_chars(struct async_struct *info) custom.serdat = info->xmit.buf[info->xmit.tail++] | 0x100; mb(); info->xmit.tail = info->xmit.tail & (SERIAL_XMIT_SIZE-1); - info->state->icount.tx++; + info->icount.tx++; if (CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE) < WAKEUP_CHARS) - rs_sched_event(info, RS_EVENT_WRITE_WAKEUP); + tty_wakeup(info->tport.tty); #ifdef SERIAL_DEBUG_INTR printk("THRE..."); @@ -371,8 +376,9 @@ static void transmit_chars(struct async_struct *info) } } -static void check_modem_status(struct async_struct *info) +static void check_modem_status(struct serial_state *info) { + struct tty_port *port = &info->tport; unsigned char status = ciab.pra & (SER_DCD | SER_CTS | SER_DSR); unsigned char dstatus; struct async_icount *icount; @@ -382,52 +388,52 @@ static void check_modem_status(struct async_struct *info) current_ctl_bits = status; if (dstatus) { - icount = &info->state->icount; + icount = &info->icount; /* update input line counters */ if (dstatus & SER_DSR) icount->dsr++; if (dstatus & SER_DCD) { icount->dcd++; #ifdef CONFIG_HARD_PPS - if ((info->flags & ASYNC_HARDPPS_CD) && + if ((port->flags & ASYNC_HARDPPS_CD) && !(status & SER_DCD)) hardpps(); #endif } if (dstatus & SER_CTS) icount->cts++; - wake_up_interruptible(&info->delta_msr_wait); + wake_up_interruptible(&port->delta_msr_wait); } - if ((info->flags & ASYNC_CHECK_CD) && (dstatus & SER_DCD)) { + if ((port->flags & ASYNC_CHECK_CD) && (dstatus & SER_DCD)) { #if (defined(SERIAL_DEBUG_OPEN) || defined(SERIAL_DEBUG_INTR)) printk("ttyS%d CD now %s...", info->line, (!(status & SER_DCD)) ? "on" : "off"); #endif if (!(status & SER_DCD)) - wake_up_interruptible(&info->open_wait); + wake_up_interruptible(&port->open_wait); else { #ifdef SERIAL_DEBUG_OPEN printk("doing serial hangup..."); #endif - if (info->tty) - tty_hangup(info->tty); + if (port->tty) + tty_hangup(port->tty); } } - if (info->flags & ASYNC_CTS_FLOW) { - if (info->tty->hw_stopped) { + if (port->flags & ASYNC_CTS_FLOW) { + if (port->tty->hw_stopped) { if (!(status & SER_CTS)) { #if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW)) printk("CTS tx start..."); #endif - info->tty->hw_stopped = 0; + port->tty->hw_stopped = 0; info->IER |= UART_IER_THRI; custom.intena = IF_SETCLR | IF_TBE; mb(); /* set a pending Tx Interrupt, transmitter should restart now */ custom.intreq = IF_SETCLR | IF_TBE; mb(); - rs_sched_event(info, RS_EVENT_WRITE_WAKEUP); + tty_wakeup(port->tty); return; } } else { @@ -435,7 +441,7 @@ static void check_modem_status(struct async_struct *info) #if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW)) printk("CTS tx stop..."); #endif - info->tty->hw_stopped = 1; + port->tty->hw_stopped = 1; info->IER &= ~UART_IER_THRI; /* disable Tx interrupt and remove any pending interrupts */ custom.intena = IF_TBE; @@ -450,7 +456,7 @@ static void check_modem_status(struct async_struct *info) static irqreturn_t ser_vbl_int( int irq, void *data) { /* vbl is just a periodic interrupt we tie into to update modem status */ - struct async_struct * info = IRQ_ports; + struct serial_state *info = data; /* * TBD - is it better to unregister from this interrupt or to * ignore it if MSI is clear ? @@ -462,18 +468,16 @@ static irqreturn_t ser_vbl_int( int irq, void *data) static irqreturn_t ser_rx_int(int irq, void *dev_id) { - struct async_struct * info; + struct serial_state *info = dev_id; #ifdef SERIAL_DEBUG_INTR printk("ser_rx_int..."); #endif - info = IRQ_ports; - if (!info || !info->tty) + if (!info->tport.tty) return IRQ_NONE; receive_chars(info); - info->last_active = jiffies; #ifdef SERIAL_DEBUG_INTR printk("end.\n"); #endif @@ -482,19 +486,17 @@ static irqreturn_t ser_rx_int(int irq, void *dev_id) static irqreturn_t ser_tx_int(int irq, void *dev_id) { - struct async_struct * info; + struct serial_state *info = dev_id; if (custom.serdatr & SDR_TBE) { #ifdef SERIAL_DEBUG_INTR printk("ser_tx_int..."); #endif - info = IRQ_ports; - if (!info || !info->tty) + if (!info->tport.tty) return IRQ_NONE; transmit_chars(info); - info->last_active = jiffies; #ifdef SERIAL_DEBUG_INTR printk("end.\n"); #endif @@ -509,29 +511,6 @@ static irqreturn_t ser_tx_int(int irq, void *dev_id) */ /* - * This routine is used to handle the "bottom half" processing for the - * serial driver, known also the "software interrupt" processing. - * This processing is done at the kernel interrupt level, after the - * rs_interrupt() has returned, BUT WITH INTERRUPTS TURNED ON. This - * is where time-consuming activities which can not be done in the - * interrupt driver proper are done; the interrupt driver schedules - * them using rs_sched_event(), and they get done here. - */ - -static void do_softint(unsigned long private_) -{ - struct async_struct *info = (struct async_struct *) private_; - struct tty_struct *tty; - - tty = info->tty; - if (!tty) - return; - - if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &info->event)) - tty_wakeup(tty); -} - -/* * --------------------------------------------------------------- * Low level utility subroutines for the serial driver: routines to * figure out the appropriate timeout for an interrupt chain, routines @@ -540,8 +519,9 @@ static void do_softint(unsigned long private_) * --------------------------------------------------------------- */ -static int startup(struct async_struct * info) +static int startup(struct tty_struct *tty, struct serial_state *info) { + struct tty_port *port = &info->tport; unsigned long flags; int retval=0; unsigned long page; @@ -552,7 +532,7 @@ static int startup(struct async_struct * info) local_irq_save(flags); - if (info->flags & ASYNC_INITIALIZED) { + if (port->flags & ASYNC_INITIALIZED) { free_page(page); goto errout; } @@ -574,9 +554,7 @@ static int startup(struct async_struct * info) retval = request_irq(IRQ_AMIGA_VERTB, ser_vbl_int, 0, "serial status", info); if (retval) { if (serial_isroot()) { - if (info->tty) - set_bit(TTY_IO_ERROR, - &info->tty->flags); + set_bit(TTY_IO_ERROR, &tty->flags); retval = 0; } goto errout; @@ -590,37 +568,32 @@ static int startup(struct async_struct * info) /* remember current state of the DCD and CTS bits */ current_ctl_bits = ciab.pra & (SER_DCD | SER_CTS | SER_DSR); - IRQ_ports = info; - info->MCR = 0; - if (info->tty->termios->c_cflag & CBAUD) + if (C_BAUD(tty)) info->MCR = SER_DTR | SER_RTS; rtsdtr_ctrl(info->MCR); - if (info->tty) - clear_bit(TTY_IO_ERROR, &info->tty->flags); + clear_bit(TTY_IO_ERROR, &tty->flags); info->xmit.head = info->xmit.tail = 0; /* * Set up the tty->alt_speed kludge */ - if (info->tty) { - if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) - info->tty->alt_speed = 57600; - if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) - info->tty->alt_speed = 115200; - if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) - info->tty->alt_speed = 230400; - if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) - info->tty->alt_speed = 460800; - } + if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) + tty->alt_speed = 57600; + if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) + tty->alt_speed = 115200; + if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) + tty->alt_speed = 230400; + if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) + tty->alt_speed = 460800; /* * and set the speed of the serial port */ - change_speed(info, NULL); + change_speed(tty, info, NULL); - info->flags |= ASYNC_INITIALIZED; + port->flags |= ASYNC_INITIALIZED; local_irq_restore(flags); return 0; @@ -633,15 +606,15 @@ errout: * This routine will shutdown a serial port; interrupts are disabled, and * DTR is dropped if the hangup on close termio flag is on. */ -static void shutdown(struct async_struct * info) +static void shutdown(struct tty_struct *tty, struct serial_state *info) { unsigned long flags; struct serial_state *state; - if (!(info->flags & ASYNC_INITIALIZED)) + if (!(info->tport.flags & ASYNC_INITIALIZED)) return; - state = info->state; + state = info; #ifdef SERIAL_DEBUG_OPEN printk("Shutting down serial port %d ....\n", info->line); @@ -653,9 +626,7 @@ static void shutdown(struct async_struct * info) * clear delta_msr_wait queue to avoid mem leaks: we may free the irq * here so the queue might never be waken up */ - wake_up_interruptible(&info->delta_msr_wait); - - IRQ_ports = NULL; + wake_up_interruptible(&info->tport.delta_msr_wait); /* * Free the IRQ, if necessary @@ -675,14 +646,13 @@ static void shutdown(struct async_struct * info) custom.adkcon = AC_UARTBRK; mb(); - if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) + if (tty->termios->c_cflag & HUPCL) info->MCR &= ~(SER_DTR|SER_RTS); rtsdtr_ctrl(info->MCR); - if (info->tty) - set_bit(TTY_IO_ERROR, &info->tty->flags); + set_bit(TTY_IO_ERROR, &tty->flags); - info->flags &= ~ASYNC_INITIALIZED; + info->tport.flags &= ~ASYNC_INITIALIZED; local_irq_restore(flags); } @@ -691,17 +661,16 @@ static void shutdown(struct async_struct * info) * This routine is called to set the UART divisor registers to match * the specified baud rate for a serial port. */ -static void change_speed(struct async_struct *info, +static void change_speed(struct tty_struct *tty, struct serial_state *info, struct ktermios *old_termios) { + struct tty_port *port = &info->tport; int quot = 0, baud_base, baud; unsigned cflag, cval = 0; int bits; unsigned long flags; - if (!info->tty || !info->tty->termios) - return; - cflag = info->tty->termios->c_cflag; + cflag = tty->termios->c_cflag; /* Byte size is always 8 bits plus parity bit if requested */ @@ -722,13 +691,12 @@ static void change_speed(struct async_struct *info, #endif /* Determine divisor based on baud rate */ - baud = tty_get_baud_rate(info->tty); + baud = tty_get_baud_rate(tty); if (!baud) baud = 9600; /* B0 transition handled in rs_set_termios */ - baud_base = info->state->baud_base; - if (baud == 38400 && - ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST)) - quot = info->state->custom_divisor; + baud_base = info->baud_base; + if (baud == 38400 && (port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) + quot = info->custom_divisor; else { if (baud == 134) /* Special case since 134 is really 134.5 */ @@ -739,14 +707,14 @@ static void change_speed(struct async_struct *info, /* If the quotient is zero refuse the change */ if (!quot && old_termios) { /* FIXME: Will need updating for new tty in the end */ - info->tty->termios->c_cflag &= ~CBAUD; - info->tty->termios->c_cflag |= (old_termios->c_cflag & CBAUD); - baud = tty_get_baud_rate(info->tty); + tty->termios->c_cflag &= ~CBAUD; + tty->termios->c_cflag |= (old_termios->c_cflag & CBAUD); + baud = tty_get_baud_rate(tty); if (!baud) baud = 9600; if (baud == 38400 && - ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST)) - quot = info->state->custom_divisor; + (port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) + quot = info->custom_divisor; else { if (baud == 134) /* Special case since 134 is really 134.5 */ @@ -764,17 +732,17 @@ static void change_speed(struct async_struct *info, /* CTS flow control flag and modem status interrupts */ info->IER &= ~UART_IER_MSI; - if (info->flags & ASYNC_HARDPPS_CD) + if (port->flags & ASYNC_HARDPPS_CD) info->IER |= UART_IER_MSI; if (cflag & CRTSCTS) { - info->flags |= ASYNC_CTS_FLOW; + port->flags |= ASYNC_CTS_FLOW; info->IER |= UART_IER_MSI; } else - info->flags &= ~ASYNC_CTS_FLOW; + port->flags &= ~ASYNC_CTS_FLOW; if (cflag & CLOCAL) - info->flags &= ~ASYNC_CHECK_CD; + port->flags &= ~ASYNC_CHECK_CD; else { - info->flags |= ASYNC_CHECK_CD; + port->flags |= ASYNC_CHECK_CD; info->IER |= UART_IER_MSI; } /* TBD: @@ -786,24 +754,24 @@ static void change_speed(struct async_struct *info, */ info->read_status_mask = UART_LSR_OE | UART_LSR_DR; - if (I_INPCK(info->tty)) + if (I_INPCK(tty)) info->read_status_mask |= UART_LSR_FE | UART_LSR_PE; - if (I_BRKINT(info->tty) || I_PARMRK(info->tty)) + if (I_BRKINT(tty) || I_PARMRK(tty)) info->read_status_mask |= UART_LSR_BI; /* * Characters to ignore */ info->ignore_status_mask = 0; - if (I_IGNPAR(info->tty)) + if (I_IGNPAR(tty)) info->ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; - if (I_IGNBRK(info->tty)) { + if (I_IGNBRK(tty)) { info->ignore_status_mask |= UART_LSR_BI; /* * If we're ignore parity and break indicators, ignore * overruns too. (For real raw support). */ - if (I_IGNPAR(info->tty)) + if (I_IGNPAR(tty)) info->ignore_status_mask |= UART_LSR_OE; } /* @@ -828,13 +796,12 @@ static void change_speed(struct async_struct *info, mb(); } - info->LCR = cval; /* Save LCR */ local_irq_restore(flags); } static int rs_put_char(struct tty_struct *tty, unsigned char ch) { - struct async_struct *info; + struct serial_state *info; unsigned long flags; info = tty->driver_data; @@ -861,7 +828,7 @@ static int rs_put_char(struct tty_struct *tty, unsigned char ch) static void rs_flush_chars(struct tty_struct *tty) { - struct async_struct *info = tty->driver_data; + struct serial_state *info = tty->driver_data; unsigned long flags; if (serial_paranoia_check(info, tty->name, "rs_flush_chars")) @@ -886,11 +853,9 @@ static void rs_flush_chars(struct tty_struct *tty) static int rs_write(struct tty_struct * tty, const unsigned char *buf, int count) { int c, ret = 0; - struct async_struct *info; + struct serial_state *info = tty->driver_data; unsigned long flags; - info = tty->driver_data; - if (serial_paranoia_check(info, tty->name, "rs_write")) return 0; @@ -934,7 +899,7 @@ static int rs_write(struct tty_struct * tty, const unsigned char *buf, int count static int rs_write_room(struct tty_struct *tty) { - struct async_struct *info = tty->driver_data; + struct serial_state *info = tty->driver_data; if (serial_paranoia_check(info, tty->name, "rs_write_room")) return 0; @@ -943,7 +908,7 @@ static int rs_write_room(struct tty_struct *tty) static int rs_chars_in_buffer(struct tty_struct *tty) { - struct async_struct *info = tty->driver_data; + struct serial_state *info = tty->driver_data; if (serial_paranoia_check(info, tty->name, "rs_chars_in_buffer")) return 0; @@ -952,7 +917,7 @@ static int rs_chars_in_buffer(struct tty_struct *tty) static void rs_flush_buffer(struct tty_struct *tty) { - struct async_struct *info = tty->driver_data; + struct serial_state *info = tty->driver_data; unsigned long flags; if (serial_paranoia_check(info, tty->name, "rs_flush_buffer")) @@ -969,7 +934,7 @@ static void rs_flush_buffer(struct tty_struct *tty) */ static void rs_send_xchar(struct tty_struct *tty, char ch) { - struct async_struct *info = tty->driver_data; + struct serial_state *info = tty->driver_data; unsigned long flags; if (serial_paranoia_check(info, tty->name, "rs_send_char")) @@ -1004,7 +969,7 @@ static void rs_send_xchar(struct tty_struct *tty, char ch) */ static void rs_throttle(struct tty_struct * tty) { - struct async_struct *info = tty->driver_data; + struct serial_state *info = tty->driver_data; unsigned long flags; #ifdef SERIAL_DEBUG_THROTTLE char buf[64]; @@ -1029,7 +994,7 @@ static void rs_throttle(struct tty_struct * tty) static void rs_unthrottle(struct tty_struct * tty) { - struct async_struct *info = tty->driver_data; + struct serial_state *info = tty->driver_data; unsigned long flags; #ifdef SERIAL_DEBUG_THROTTLE char buf[64]; @@ -1060,25 +1025,22 @@ static void rs_unthrottle(struct tty_struct * tty) * ------------------------------------------------------------ */ -static int get_serial_info(struct async_struct * info, +static int get_serial_info(struct tty_struct *tty, struct serial_state *state, struct serial_struct __user * retinfo) { struct serial_struct tmp; - struct serial_state *state = info->state; if (!retinfo) return -EFAULT; memset(&tmp, 0, sizeof(tmp)); tty_lock(); - tmp.type = state->type; - tmp.line = state->line; + tmp.line = tty->index; tmp.port = state->port; - tmp.irq = state->irq; - tmp.flags = state->flags; + tmp.flags = state->tport.flags; tmp.xmit_fifo_size = state->xmit_fifo_size; tmp.baud_base = state->baud_base; - tmp.close_delay = state->close_delay; - tmp.closing_wait = state->closing_wait; + tmp.close_delay = state->tport.close_delay; + tmp.closing_wait = state->tport.closing_wait; tmp.custom_divisor = state->custom_divisor; tty_unlock(); if (copy_to_user(retinfo,&tmp,sizeof(*retinfo))) @@ -1086,38 +1048,34 @@ static int get_serial_info(struct async_struct * info, return 0; } -static int set_serial_info(struct async_struct * info, +static int set_serial_info(struct tty_struct *tty, struct serial_state *state, struct serial_struct __user * new_info) { + struct tty_port *port = &state->tport; struct serial_struct new_serial; - struct serial_state old_state, *state; - unsigned int change_irq,change_port; + bool change_spd; int retval = 0; if (copy_from_user(&new_serial,new_info,sizeof(new_serial))) return -EFAULT; tty_lock(); - state = info->state; - old_state = *state; - - change_irq = new_serial.irq != state->irq; - change_port = (new_serial.port != state->port); - if(change_irq || change_port || (new_serial.xmit_fifo_size != state->xmit_fifo_size)) { - tty_unlock(); - return -EINVAL; + change_spd = ((new_serial.flags ^ port->flags) & ASYNC_SPD_MASK) || + new_serial.custom_divisor != state->custom_divisor; + if (new_serial.irq || new_serial.port != state->port || + new_serial.xmit_fifo_size != state->xmit_fifo_size) { + tty_unlock(); + return -EINVAL; } if (!serial_isroot()) { if ((new_serial.baud_base != state->baud_base) || - (new_serial.close_delay != state->close_delay) || + (new_serial.close_delay != port->close_delay) || (new_serial.xmit_fifo_size != state->xmit_fifo_size) || ((new_serial.flags & ~ASYNC_USR_MASK) != - (state->flags & ~ASYNC_USR_MASK))) + (port->flags & ~ASYNC_USR_MASK))) return -EPERM; - state->flags = ((state->flags & ~ASYNC_USR_MASK) | - (new_serial.flags & ASYNC_USR_MASK)); - info->flags = ((info->flags & ~ASYNC_USR_MASK) | + port->flags = ((port->flags & ~ASYNC_USR_MASK) | (new_serial.flags & ASYNC_USR_MASK)); state->custom_divisor = new_serial.custom_divisor; goto check_and_exit; @@ -1134,32 +1092,28 @@ static int set_serial_info(struct async_struct * info, */ state->baud_base = new_serial.baud_base; - state->flags = ((state->flags & ~ASYNC_FLAGS) | + port->flags = ((port->flags & ~ASYNC_FLAGS) | (new_serial.flags & ASYNC_FLAGS)); - info->flags = ((state->flags & ~ASYNC_INTERNAL_FLAGS) | - (info->flags & ASYNC_INTERNAL_FLAGS)); state->custom_divisor = new_serial.custom_divisor; - state->close_delay = new_serial.close_delay * HZ/100; - state->closing_wait = new_serial.closing_wait * HZ/100; - info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0; + port->close_delay = new_serial.close_delay * HZ/100; + port->closing_wait = new_serial.closing_wait * HZ/100; + tty->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0; check_and_exit: - if (info->flags & ASYNC_INITIALIZED) { - if (((old_state.flags & ASYNC_SPD_MASK) != - (state->flags & ASYNC_SPD_MASK)) || - (old_state.custom_divisor != state->custom_divisor)) { - if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) - info->tty->alt_speed = 57600; - if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) - info->tty->alt_speed = 115200; - if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) - info->tty->alt_speed = 230400; - if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) - info->tty->alt_speed = 460800; - change_speed(info, NULL); + if (port->flags & ASYNC_INITIALIZED) { + if (change_spd) { + if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) + tty->alt_speed = 57600; + if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) + tty->alt_speed = 115200; + if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) + tty->alt_speed = 230400; + if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) + tty->alt_speed = 460800; + change_speed(tty, state, NULL); } } else - retval = startup(info); + retval = startup(tty, state); tty_unlock(); return retval; } @@ -1175,7 +1129,7 @@ check_and_exit: * transmit holding register is empty. This functionality * allows an RS485 driver to be written in user space. */ -static int get_lsr_info(struct async_struct * info, unsigned int __user *value) +static int get_lsr_info(struct serial_state *info, unsigned int __user *value) { unsigned char status; unsigned int result; @@ -1194,7 +1148,7 @@ static int get_lsr_info(struct async_struct * info, unsigned int __user *value) static int rs_tiocmget(struct tty_struct *tty) { - struct async_struct * info = tty->driver_data; + struct serial_state *info = tty->driver_data; unsigned char control, status; unsigned long flags; @@ -1217,7 +1171,7 @@ static int rs_tiocmget(struct tty_struct *tty) static int rs_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { - struct async_struct * info = tty->driver_data; + struct serial_state *info = tty->driver_data; unsigned long flags; if (serial_paranoia_check(info, tty->name, "rs_ioctl")) @@ -1244,7 +1198,7 @@ static int rs_tiocmset(struct tty_struct *tty, unsigned int set, */ static int rs_break(struct tty_struct *tty, int break_state) { - struct async_struct * info = tty->driver_data; + struct serial_state *info = tty->driver_data; unsigned long flags; if (serial_paranoia_check(info, tty->name, "rs_break")) @@ -1269,12 +1223,12 @@ static int rs_break(struct tty_struct *tty, int break_state) static int rs_get_icount(struct tty_struct *tty, struct serial_icounter_struct *icount) { - struct async_struct *info = tty->driver_data; + struct serial_state *info = tty->driver_data; struct async_icount cnow; unsigned long flags; local_irq_save(flags); - cnow = info->state->icount; + cnow = info->icount; local_irq_restore(flags); icount->cts = cnow.cts; icount->dsr = cnow.dsr; @@ -1294,7 +1248,7 @@ static int rs_get_icount(struct tty_struct *tty, static int rs_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { - struct async_struct * info = tty->driver_data; + struct serial_state *info = tty->driver_data; struct async_icount cprev, cnow; /* kernel counter temps */ void __user *argp = (void __user *)arg; unsigned long flags; @@ -1311,9 +1265,9 @@ static int rs_ioctl(struct tty_struct *tty, switch (cmd) { case TIOCGSERIAL: - return get_serial_info(info, argp); + return get_serial_info(tty, info, argp); case TIOCSSERIAL: - return set_serial_info(info, argp); + return set_serial_info(tty, info, argp); case TIOCSERCONFIG: return 0; @@ -1322,7 +1276,7 @@ static int rs_ioctl(struct tty_struct *tty, case TIOCSERGSTRUCT: if (copy_to_user(argp, - info, sizeof(struct async_struct))) + info, sizeof(struct serial_state))) return -EFAULT; return 0; @@ -1335,15 +1289,15 @@ static int rs_ioctl(struct tty_struct *tty, case TIOCMIWAIT: local_irq_save(flags); /* note the counters on entry */ - cprev = info->state->icount; + cprev = info->icount; local_irq_restore(flags); while (1) { - interruptible_sleep_on(&info->delta_msr_wait); + interruptible_sleep_on(&info->tport.delta_msr_wait); /* see if a signal did it */ if (signal_pending(current)) return -ERESTARTSYS; local_irq_save(flags); - cnow = info->state->icount; /* atomic copy */ + cnow = info->icount; /* atomic copy */ local_irq_restore(flags); if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) @@ -1372,11 +1326,11 @@ static int rs_ioctl(struct tty_struct *tty, static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios) { - struct async_struct *info = tty->driver_data; + struct serial_state *info = tty->driver_data; unsigned long flags; unsigned int cflag = tty->termios->c_cflag; - change_speed(info, old_termios); + change_speed(tty, info, old_termios); /* Handle transition to B0 status */ if ((old_termios->c_cflag & CBAUD) && @@ -1432,64 +1386,23 @@ static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios) */ static void rs_close(struct tty_struct *tty, struct file * filp) { - struct async_struct * info = tty->driver_data; - struct serial_state *state; - unsigned long flags; + struct serial_state *state = tty->driver_data; + struct tty_port *port = &state->tport; - if (!info || serial_paranoia_check(info, tty->name, "rs_close")) + if (serial_paranoia_check(state, tty->name, "rs_close")) return; - state = info->state; - - local_irq_save(flags); - - if (tty_hung_up_p(filp)) { - DBG_CNT("before DEC-hung"); - local_irq_restore(flags); + if (tty_port_close_start(port, tty, filp) == 0) return; - } -#ifdef SERIAL_DEBUG_OPEN - printk("rs_close ttys%d, count = %d\n", info->line, state->count); -#endif - if ((tty->count == 1) && (state->count != 1)) { - /* - * Uh, oh. tty->count is 1, which means that the tty - * structure will be freed. state->count should always - * be one in these conditions. If it's greater than - * one, we've got real problems, since it means the - * serial port won't be shutdown. - */ - printk("rs_close: bad serial port count; tty->count is 1, " - "state->count is %d\n", state->count); - state->count = 1; - } - if (--state->count < 0) { - printk("rs_close: bad serial port count for ttys%d: %d\n", - info->line, state->count); - state->count = 0; - } - if (state->count) { - DBG_CNT("before DEC-2"); - local_irq_restore(flags); - return; - } - info->flags |= ASYNC_CLOSING; - /* - * Now we wait for the transmit buffer to clear; and we notify - * the line discipline to only process XON/XOFF characters. - */ - tty->closing = 1; - if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE) - tty_wait_until_sent(tty, info->closing_wait); /* * At this point we stop accepting input. To do this, we * disable the receive line status interrupts, and tell the * interrupt driver to stop checking the data ready bit in the * line status register. */ - info->read_status_mask &= ~UART_LSR_DR; - if (info->flags & ASYNC_INITIALIZED) { + state->read_status_mask &= ~UART_LSR_DR; + if (port->flags & ASYNC_INITIALIZED) { /* disable receive interrupts */ custom.intena = IF_RBF; mb(); @@ -1502,24 +1415,15 @@ static void rs_close(struct tty_struct *tty, struct file * filp) * has completely drained; this is especially * important if there is a transmit FIFO! */ - rs_wait_until_sent(tty, info->timeout); + rs_wait_until_sent(tty, state->timeout); } - shutdown(info); + shutdown(tty, state); rs_flush_buffer(tty); tty_ldisc_flush(tty); - tty->closing = 0; - info->event = 0; - info->tty = NULL; - if (info->blocked_open) { - if (info->close_delay) { - msleep_interruptible(jiffies_to_msecs(info->close_delay)); - } - wake_up_interruptible(&info->open_wait); - } - info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); - wake_up_interruptible(&info->close_wait); - local_irq_restore(flags); + port->tty = NULL; + + tty_port_close_end(port, tty); } /* @@ -1527,7 +1431,7 @@ static void rs_close(struct tty_struct *tty, struct file * filp) */ static void rs_wait_until_sent(struct tty_struct *tty, int timeout) { - struct async_struct * info = tty->driver_data; + struct serial_state *info = tty->driver_data; unsigned long orig_jiffies, char_time; int lsr; @@ -1590,173 +1494,17 @@ static void rs_wait_until_sent(struct tty_struct *tty, int timeout) */ static void rs_hangup(struct tty_struct *tty) { - struct async_struct * info = tty->driver_data; - struct serial_state *state = info->state; + struct serial_state *info = tty->driver_data; if (serial_paranoia_check(info, tty->name, "rs_hangup")) return; - state = info->state; - rs_flush_buffer(tty); - shutdown(info); - info->event = 0; - state->count = 0; - info->flags &= ~ASYNC_NORMAL_ACTIVE; - info->tty = NULL; - wake_up_interruptible(&info->open_wait); -} - -/* - * ------------------------------------------------------------ - * rs_open() and friends - * ------------------------------------------------------------ - */ -static int block_til_ready(struct tty_struct *tty, struct file * filp, - struct async_struct *info) -{ -#ifdef DECLARE_WAITQUEUE - DECLARE_WAITQUEUE(wait, current); -#else - struct wait_queue wait = { current, NULL }; -#endif - struct serial_state *state = info->state; - int retval; - int do_clocal = 0, extra_count = 0; - unsigned long flags; - - /* - * If the device is in the middle of being closed, then block - * until it's done, and then try again. - */ - if (tty_hung_up_p(filp) || - (info->flags & ASYNC_CLOSING)) { - if (info->flags & ASYNC_CLOSING) - interruptible_sleep_on(&info->close_wait); -#ifdef SERIAL_DO_RESTART - return ((info->flags & ASYNC_HUP_NOTIFY) ? - -EAGAIN : -ERESTARTSYS); -#else - return -EAGAIN; -#endif - } - - /* - * If non-blocking mode is set, or the port is not enabled, - * then make the check up front and then exit. - */ - if ((filp->f_flags & O_NONBLOCK) || - (tty->flags & (1 << TTY_IO_ERROR))) { - info->flags |= ASYNC_NORMAL_ACTIVE; - return 0; - } - - if (tty->termios->c_cflag & CLOCAL) - do_clocal = 1; - - /* - * Block waiting for the carrier detect and the line to become - * free (i.e., not in use by the callout). While we are in - * this loop, state->count is dropped by one, so that - * rs_close() knows when to free things. We restore it upon - * exit, either normal or abnormal. - */ - retval = 0; - add_wait_queue(&info->open_wait, &wait); -#ifdef SERIAL_DEBUG_OPEN - printk("block_til_ready before block: ttys%d, count = %d\n", - state->line, state->count); -#endif - local_irq_save(flags); - if (!tty_hung_up_p(filp)) { - extra_count = 1; - state->count--; - } - local_irq_restore(flags); - info->blocked_open++; - while (1) { - local_irq_save(flags); - if (tty->termios->c_cflag & CBAUD) - rtsdtr_ctrl(SER_DTR|SER_RTS); - local_irq_restore(flags); - set_current_state(TASK_INTERRUPTIBLE); - if (tty_hung_up_p(filp) || - !(info->flags & ASYNC_INITIALIZED)) { -#ifdef SERIAL_DO_RESTART - if (info->flags & ASYNC_HUP_NOTIFY) - retval = -EAGAIN; - else - retval = -ERESTARTSYS; -#else - retval = -EAGAIN; -#endif - break; - } - if (!(info->flags & ASYNC_CLOSING) && - (do_clocal || (!(ciab.pra & SER_DCD)) )) - break; - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; - } -#ifdef SERIAL_DEBUG_OPEN - printk("block_til_ready blocking: ttys%d, count = %d\n", - info->line, state->count); -#endif - tty_unlock(); - schedule(); - tty_lock(); - } - __set_current_state(TASK_RUNNING); - remove_wait_queue(&info->open_wait, &wait); - if (extra_count) - state->count++; - info->blocked_open--; -#ifdef SERIAL_DEBUG_OPEN - printk("block_til_ready after blocking: ttys%d, count = %d\n", - info->line, state->count); -#endif - if (retval) - return retval; - info->flags |= ASYNC_NORMAL_ACTIVE; - return 0; -} - -static int get_async_struct(int line, struct async_struct **ret_info) -{ - struct async_struct *info; - struct serial_state *sstate; - - sstate = rs_table + line; - sstate->count++; - if (sstate->info) { - *ret_info = sstate->info; - return 0; - } - info = kzalloc(sizeof(struct async_struct), GFP_KERNEL); - if (!info) { - sstate->count--; - return -ENOMEM; - } -#ifdef DECLARE_WAITQUEUE - init_waitqueue_head(&info->open_wait); - init_waitqueue_head(&info->close_wait); - init_waitqueue_head(&info->delta_msr_wait); -#endif - info->magic = SERIAL_MAGIC; - info->port = sstate->port; - info->flags = sstate->flags; - info->xmit_fifo_size = sstate->xmit_fifo_size; - info->line = line; - tasklet_init(&info->tlet, do_softint, (unsigned long)info); - info->state = sstate; - if (sstate->info) { - kfree(info); - *ret_info = sstate->info; - return 0; - } - *ret_info = sstate->info = info; - return 0; + shutdown(tty, info); + info->tport.count = 0; + info->tport.flags &= ~ASYNC_NORMAL_ACTIVE; + info->tport.tty = NULL; + wake_up_interruptible(&info->tport.open_wait); } /* @@ -1767,91 +1515,42 @@ static int get_async_struct(int line, struct async_struct **ret_info) */ static int rs_open(struct tty_struct *tty, struct file * filp) { - struct async_struct *info; - int retval, line; + struct serial_state *info = rs_table + tty->index; + struct tty_port *port = &info->tport; + int retval; - line = tty->index; - if ((line < 0) || (line >= NR_PORTS)) { - return -ENODEV; - } - retval = get_async_struct(line, &info); - if (retval) { - return retval; - } + port->count++; + port->tty = tty; tty->driver_data = info; - info->tty = tty; + tty->port = port; if (serial_paranoia_check(info, tty->name, "rs_open")) return -ENODEV; -#ifdef SERIAL_DEBUG_OPEN - printk("rs_open %s, count = %d\n", tty->name, info->state->count); -#endif - info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0; + tty->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0; - /* - * If the port is the middle of closing, bail out now - */ - if (tty_hung_up_p(filp) || - (info->flags & ASYNC_CLOSING)) { - if (info->flags & ASYNC_CLOSING) - interruptible_sleep_on(&info->close_wait); -#ifdef SERIAL_DO_RESTART - return ((info->flags & ASYNC_HUP_NOTIFY) ? - -EAGAIN : -ERESTARTSYS); -#else - return -EAGAIN; -#endif - } - - /* - * Start up serial port - */ - retval = startup(info); - if (retval) { - return retval; - } - - retval = block_til_ready(tty, filp, info); + retval = startup(tty, info); if (retval) { -#ifdef SERIAL_DEBUG_OPEN - printk("rs_open returning after block_til_ready with %d\n", - retval); -#endif return retval; } -#ifdef SERIAL_DEBUG_OPEN - printk("rs_open %s successful...", tty->name); -#endif - return 0; + return tty_port_block_til_ready(port, tty, filp); } /* * /proc fs routines.... */ -static inline void line_info(struct seq_file *m, struct serial_state *state) +static inline void line_info(struct seq_file *m, int line, + struct serial_state *state) { - struct async_struct *info = state->info, scr_info; char stat_buf[30], control, status; unsigned long flags; - seq_printf(m, "%d: uart:amiga_builtin",state->line); + seq_printf(m, "%d: uart:amiga_builtin", line); - /* - * Figure out the current RS-232 lines - */ - if (!info) { - info = &scr_info; /* This is just for serial_{in,out} */ - - info->magic = SERIAL_MAGIC; - info->flags = state->flags; - info->quot = 0; - info->tty = NULL; - } local_irq_save(flags); status = ciab.pra; - control = info ? info->MCR : status; + control = (state->tport.flags & ASYNC_INITIALIZED) ? state->MCR : status; local_irq_restore(flags); stat_buf[0] = 0; @@ -1867,9 +1566,8 @@ static inline void line_info(struct seq_file *m, struct serial_state *state) if(!(status & SER_DCD)) strcat(stat_buf, "|CD"); - if (info->quot) { - seq_printf(m, " baud:%d", state->baud_base / info->quot); - } + if (state->quot) + seq_printf(m, " baud:%d", state->baud_base / state->quot); seq_printf(m, " tx:%d rx:%d", state->icount.tx, state->icount.rx); @@ -1894,7 +1592,7 @@ static inline void line_info(struct seq_file *m, struct serial_state *state) static int rs_proc_show(struct seq_file *m, void *v) { seq_printf(m, "serinfo:1.0 driver:%s\n", serial_version); - line_info(m, &rs_table[0]); + line_info(m, 0, &rs_table[0]); return 0; } @@ -1955,6 +1653,32 @@ static const struct tty_operations serial_ops = { .proc_fops = &rs_proc_fops, }; +static int amiga_carrier_raised(struct tty_port *port) +{ + return !(ciab.pra & SER_DCD); +} + +static void amiga_dtr_rts(struct tty_port *port, int raise) +{ + struct serial_state *info = container_of(port, struct serial_state, + tport); + unsigned long flags; + + if (raise) + info->MCR |= SER_DTR|SER_RTS; + else + info->MCR &= ~(SER_DTR|SER_RTS); + + local_irq_save(flags); + rtsdtr_ctrl(info->MCR); + local_irq_restore(flags); +} + +static const struct tty_port_operations amiga_port_ops = { + .carrier_raised = amiga_carrier_raised, + .dtr_rts = amiga_dtr_rts, +}; + /* * The serial driver boot-time initialization code! */ @@ -1964,17 +1688,14 @@ static int __init amiga_serial_probe(struct platform_device *pdev) struct serial_state * state; int error; - serial_driver = alloc_tty_driver(1); + serial_driver = alloc_tty_driver(NR_PORTS); if (!serial_driver) return -ENOMEM; - IRQ_ports = NULL; - show_serial_version(); /* Initialize the tty_driver structure */ - serial_driver->owner = THIS_MODULE; serial_driver->driver_name = "amiserial"; serial_driver->name = "ttyS"; serial_driver->major = TTY_MAJOR; @@ -1992,20 +1713,17 @@ static int __init amiga_serial_probe(struct platform_device *pdev) goto fail_put_tty_driver; state = rs_table; - state->magic = SSTATE_MAGIC; state->port = (int)&custom.serdatr; /* Just to give it a value */ - state->line = 0; state->custom_divisor = 0; - state->close_delay = 5*HZ/10; - state->closing_wait = 30*HZ; state->icount.cts = state->icount.dsr = state->icount.rng = state->icount.dcd = 0; state->icount.rx = state->icount.tx = 0; state->icount.frame = state->icount.parity = 0; state->icount.overrun = state->icount.brk = 0; + tty_port_init(&state->tport); + state->tport.ops = &amiga_port_ops; - printk(KERN_INFO "ttyS%d is the amiga builtin serial port\n", - state->line); + printk(KERN_INFO "ttyS0 is the amiga builtin serial port\n"); /* Hardware set up */ @@ -2058,20 +1776,15 @@ static int __exit amiga_serial_remove(struct platform_device *pdev) { int error; struct serial_state *state = platform_get_drvdata(pdev); - struct async_struct *info = state->info; /* printk("Unloading %s: version %s\n", serial_name, serial_version); */ - tasklet_kill(&info->tlet); if ((error = tty_unregister_driver(serial_driver))) printk("SERIAL: failed to unregister serial driver (%d)\n", error); put_tty_driver(serial_driver); - rs_table[0].info = NULL; - kfree(info); - - free_irq(IRQ_AMIGA_TBE, rs_table); - free_irq(IRQ_AMIGA_RBF, rs_table); + free_irq(IRQ_AMIGA_TBE, state); + free_irq(IRQ_AMIGA_RBF, state); platform_set_drvdata(pdev, NULL); diff --git a/drivers/tty/bfin_jtag_comm.c b/drivers/tty/bfin_jtag_comm.c index 3a997760ec3..946f799861f 100644 --- a/drivers/tty/bfin_jtag_comm.c +++ b/drivers/tty/bfin_jtag_comm.c @@ -257,7 +257,6 @@ static int __init bfin_jc_init(void) if (!bfin_jc_driver) goto err_driver; - bfin_jc_driver->owner = THIS_MODULE; bfin_jc_driver->driver_name = DRV_NAME; bfin_jc_driver->name = DEV_NAME; bfin_jc_driver->type = TTY_DRIVER_TYPE_SERIAL; diff --git a/drivers/tty/cyclades.c b/drivers/tty/cyclades.c index c9bf779481d..e61cabdd69d 100644 --- a/drivers/tty/cyclades.c +++ b/drivers/tty/cyclades.c @@ -1515,13 +1515,9 @@ static void cy_shutdown(struct cyclades_port *info, struct tty_struct *tty) static int cy_open(struct tty_struct *tty, struct file *filp) { struct cyclades_port *info; - unsigned int i, line; + unsigned int i, line = tty->index; int retval; - line = tty->index; - if (tty->index < 0 || NR_PORTS <= line) - return -ENODEV; - for (i = 0; i < NR_CARDS; i++) if (line < cy_card[i].first_line + cy_card[i].nports && line >= cy_card[i].first_line) @@ -2413,7 +2409,7 @@ static int get_lsr_info(struct cyclades_port *info, unsigned int __user *value) /* Not supported yet */ return -EINVAL; } - return put_user(result, (unsigned long __user *)value); + return put_user(result, value); } static int cy_tiocmget(struct tty_struct *tty) @@ -4090,7 +4086,6 @@ static int __init cy_init(void) /* Initialize the tty_driver structure */ - cy_serial_driver->owner = THIS_MODULE; cy_serial_driver->driver_name = "cyclades"; cy_serial_driver->name = "ttyC"; cy_serial_driver->major = CYCLADES_MAJOR; diff --git a/drivers/tty/ehv_bytechan.c b/drivers/tty/ehv_bytechan.c index 1595dba0072..4813684cb63 100644 --- a/drivers/tty/ehv_bytechan.c +++ b/drivers/tty/ehv_bytechan.c @@ -825,7 +825,6 @@ static int __init ehv_bc_init(void) goto error; } - ehv_bc_driver->owner = THIS_MODULE; ehv_bc_driver->driver_name = "ehv-bc"; ehv_bc_driver->name = ehv_bc_console.name; ehv_bc_driver->type = TTY_DRIVER_TYPE_CONSOLE; diff --git a/drivers/tty/hvc/Kconfig b/drivers/tty/hvc/Kconfig index 4222035acfb..0282a83f51f 100644 --- a/drivers/tty/hvc/Kconfig +++ b/drivers/tty/hvc/Kconfig @@ -24,16 +24,6 @@ config HVC_OLD_HVSI depends on HVC_CONSOLE default n -config HVC_ISERIES - bool "iSeries Hypervisor Virtual Console support" - depends on PPC_ISERIES - default y - select HVC_DRIVER - select HVC_IRQ - select VIOPATH - help - iSeries machines support a hypervisor virtual console. - config HVC_OPAL bool "OPAL Console support" depends on PPC_POWERNV @@ -76,11 +66,23 @@ config HVC_XEN help Xen virtual console device driver +config HVC_XEN_FRONTEND + bool "Xen Hypervisor Multiple Consoles support" + depends on HVC_XEN + select XEN_XENBUS_FRONTEND + default y + help + Xen driver for secondary virtual consoles + config HVC_UDBG bool "udbg based fake hypervisor console" depends on PPC && EXPERIMENTAL select HVC_DRIVER default n + help + This is meant to be used during HW bring up or debugging when + no other console mechanism exist but udbg, to get you a quick + console for userspace. Do NOT enable in production kernels. config HVC_DCC bool "ARM JTAG DCC console" diff --git a/drivers/tty/hvc/Makefile b/drivers/tty/hvc/Makefile index 89abf40bc73..4ca3723b0a3 100644 --- a/drivers/tty/hvc/Makefile +++ b/drivers/tty/hvc/Makefile @@ -1,7 +1,6 @@ obj-$(CONFIG_HVC_CONSOLE) += hvc_vio.o hvsi_lib.o obj-$(CONFIG_HVC_OPAL) += hvc_opal.o hvsi_lib.o obj-$(CONFIG_HVC_OLD_HVSI) += hvsi.o -obj-$(CONFIG_HVC_ISERIES) += hvc_iseries.o obj-$(CONFIG_HVC_RTAS) += hvc_rtas.o obj-$(CONFIG_HVC_TILE) += hvc_tile.o obj-$(CONFIG_HVC_DCC) += hvc_dcc.o diff --git a/drivers/tty/hvc/hvc_beat.c b/drivers/tty/hvc/hvc_beat.c index 5fe4631e2a6..1560d235449 100644 --- a/drivers/tty/hvc/hvc_beat.c +++ b/drivers/tty/hvc/hvc_beat.c @@ -113,7 +113,7 @@ static int __init hvc_beat_init(void) if (!firmware_has_feature(FW_FEATURE_BEAT)) return -ENODEV; - hp = hvc_alloc(0, NO_IRQ, &hvc_beat_get_put_ops, 16); + hp = hvc_alloc(0, 0, &hvc_beat_get_put_ops, 16); if (IS_ERR(hp)) return PTR_ERR(hp); hvc_beat_dev = hp; diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c index b6b2d18fa38..8880adf5fc6 100644 --- a/drivers/tty/hvc/hvc_console.c +++ b/drivers/tty/hvc/hvc_console.c @@ -917,7 +917,6 @@ static int hvc_init(void) goto out; } - drv->owner = THIS_MODULE; drv->driver_name = "hvc"; drv->name = "hvc"; drv->major = HVC_MAJOR; diff --git a/drivers/tty/hvc/hvc_iseries.c b/drivers/tty/hvc/hvc_iseries.c deleted file mode 100644 index 3f4a897bf4d..00000000000 --- a/drivers/tty/hvc/hvc_iseries.c +++ /dev/null @@ -1,599 +0,0 @@ -/* - * iSeries vio driver interface to hvc_console.c - * - * This code is based heavily on hvc_vio.c and viocons.c - * - * Copyright (C) 2006 Stephen Rothwell, IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <stdarg.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/spinlock.h> -#include <linux/console.h> - -#include <asm/hvconsole.h> -#include <asm/vio.h> -#include <asm/prom.h> -#include <asm/firmware.h> -#include <asm/iseries/vio.h> -#include <asm/iseries/hv_call.h> -#include <asm/iseries/hv_lp_config.h> -#include <asm/iseries/hv_lp_event.h> - -#include "hvc_console.h" - -#define VTTY_PORTS 10 - -static DEFINE_SPINLOCK(consolelock); -static DEFINE_SPINLOCK(consoleloglock); - -static const char hvc_driver_name[] = "hvc_console"; - -#define IN_BUF_SIZE 200 - -/* - * Our port information. - */ -static struct port_info { - HvLpIndex lp; - u64 seq; /* sequence number of last HV send */ - u64 ack; /* last ack from HV */ - struct hvc_struct *hp; - int in_start; - int in_end; - unsigned char in_buf[IN_BUF_SIZE]; -} port_info[VTTY_PORTS] = { - [ 0 ... VTTY_PORTS - 1 ] = { - .lp = HvLpIndexInvalid - } -}; - -#define viochar_is_console(pi) ((pi) == &port_info[0]) - -static struct vio_device_id hvc_driver_table[] __devinitdata = { - {"serial", "IBM,iSeries-vty"}, - { "", "" } -}; -MODULE_DEVICE_TABLE(vio, hvc_driver_table); - -static void hvlog(char *fmt, ...) -{ - int i; - unsigned long flags; - va_list args; - static char buf[256]; - - spin_lock_irqsave(&consoleloglock, flags); - va_start(args, fmt); - i = vscnprintf(buf, sizeof(buf) - 1, fmt, args); - va_end(args); - buf[i++] = '\r'; - HvCall_writeLogBuffer(buf, i); - spin_unlock_irqrestore(&consoleloglock, flags); -} - -/* - * Initialize the common fields in a charLpEvent - */ -static void init_data_event(struct viocharlpevent *viochar, HvLpIndex lp) -{ - struct HvLpEvent *hev = &viochar->event; - - memset(viochar, 0, sizeof(struct viocharlpevent)); - - hev->flags = HV_LP_EVENT_VALID | HV_LP_EVENT_DEFERRED_ACK | - HV_LP_EVENT_INT; - hev->xType = HvLpEvent_Type_VirtualIo; - hev->xSubtype = viomajorsubtype_chario | viochardata; - hev->xSourceLp = HvLpConfig_getLpIndex(); - hev->xTargetLp = lp; - hev->xSizeMinus1 = sizeof(struct viocharlpevent); - hev->xSourceInstanceId = viopath_sourceinst(lp); - hev->xTargetInstanceId = viopath_targetinst(lp); -} - -static int get_chars(uint32_t vtermno, char *buf, int count) -{ - struct port_info *pi; - int n = 0; - unsigned long flags; - - if (vtermno >= VTTY_PORTS) - return -EINVAL; - if (count == 0) - return 0; - - pi = &port_info[vtermno]; - spin_lock_irqsave(&consolelock, flags); - - if (pi->in_end == 0) - goto done; - - n = pi->in_end - pi->in_start; - if (n > count) - n = count; - memcpy(buf, &pi->in_buf[pi->in_start], n); - pi->in_start += n; - if (pi->in_start == pi->in_end) { - pi->in_start = 0; - pi->in_end = 0; - } -done: - spin_unlock_irqrestore(&consolelock, flags); - return n; -} - -static int put_chars(uint32_t vtermno, const char *buf, int count) -{ - struct viocharlpevent *viochar; - struct port_info *pi; - HvLpEvent_Rc hvrc; - unsigned long flags; - int sent = 0; - - if (vtermno >= VTTY_PORTS) - return -EINVAL; - - pi = &port_info[vtermno]; - - spin_lock_irqsave(&consolelock, flags); - - if (viochar_is_console(pi) && !viopath_isactive(pi->lp)) { - HvCall_writeLogBuffer(buf, count); - sent = count; - goto done; - } - - viochar = vio_get_event_buffer(viomajorsubtype_chario); - if (viochar == NULL) { - hvlog("\n\rviocons: Can't get viochar buffer."); - goto done; - } - - while ((count > 0) && ((pi->seq - pi->ack) < VIOCHAR_WINDOW)) { - int len; - - len = (count > VIOCHAR_MAX_DATA) ? VIOCHAR_MAX_DATA : count; - - if (viochar_is_console(pi)) - HvCall_writeLogBuffer(buf, len); - - init_data_event(viochar, pi->lp); - - viochar->len = len; - viochar->event.xCorrelationToken = pi->seq++; - viochar->event.xSizeMinus1 = - offsetof(struct viocharlpevent, data) + len; - - memcpy(viochar->data, buf, len); - - hvrc = HvCallEvent_signalLpEvent(&viochar->event); - if (hvrc) - hvlog("\n\rerror sending event! return code %d\n\r", - (int)hvrc); - sent += len; - count -= len; - buf += len; - } - - vio_free_event_buffer(viomajorsubtype_chario, viochar); -done: - spin_unlock_irqrestore(&consolelock, flags); - return sent; -} - -static const struct hv_ops hvc_get_put_ops = { - .get_chars = get_chars, - .put_chars = put_chars, - .notifier_add = notifier_add_irq, - .notifier_del = notifier_del_irq, - .notifier_hangup = notifier_hangup_irq, -}; - -static int __devinit hvc_vio_probe(struct vio_dev *vdev, - const struct vio_device_id *id) -{ - struct hvc_struct *hp; - struct port_info *pi; - - /* probed with invalid parameters. */ - if (!vdev || !id) - return -EPERM; - - if (vdev->unit_address >= VTTY_PORTS) - return -ENODEV; - - pi = &port_info[vdev->unit_address]; - - hp = hvc_alloc(vdev->unit_address, vdev->irq, &hvc_get_put_ops, - VIOCHAR_MAX_DATA); - if (IS_ERR(hp)) - return PTR_ERR(hp); - pi->hp = hp; - dev_set_drvdata(&vdev->dev, pi); - - return 0; -} - -static int __devexit hvc_vio_remove(struct vio_dev *vdev) -{ - struct port_info *pi = dev_get_drvdata(&vdev->dev); - struct hvc_struct *hp = pi->hp; - - return hvc_remove(hp); -} - -static struct vio_driver hvc_vio_driver = { - .id_table = hvc_driver_table, - .probe = hvc_vio_probe, - .remove = __devexit_p(hvc_vio_remove), - .driver = { - .name = hvc_driver_name, - .owner = THIS_MODULE, - } -}; - -static void hvc_open_event(struct HvLpEvent *event) -{ - unsigned long flags; - struct viocharlpevent *cevent = (struct viocharlpevent *)event; - u8 port = cevent->virtual_device; - struct port_info *pi; - int reject = 0; - - if (hvlpevent_is_ack(event)) { - if (port >= VTTY_PORTS) - return; - - spin_lock_irqsave(&consolelock, flags); - - pi = &port_info[port]; - if (event->xRc == HvLpEvent_Rc_Good) { - pi->seq = pi->ack = 0; - /* - * This line allows connections from the primary - * partition but once one is connected from the - * primary partition nothing short of a reboot - * of linux will allow access from the hosting - * partition again without a required iSeries fix. - */ - pi->lp = event->xTargetLp; - } - - spin_unlock_irqrestore(&consolelock, flags); - if (event->xRc != HvLpEvent_Rc_Good) - printk(KERN_WARNING - "hvc: handle_open_event: event->xRc == (%d).\n", - event->xRc); - - if (event->xCorrelationToken != 0) { - atomic_t *aptr= (atomic_t *)event->xCorrelationToken; - atomic_set(aptr, 1); - } else - printk(KERN_WARNING - "hvc: weird...got open ack without atomic\n"); - return; - } - - /* This had better require an ack, otherwise complain */ - if (!hvlpevent_need_ack(event)) { - printk(KERN_WARNING "hvc: viocharopen without ack bit!\n"); - return; - } - - spin_lock_irqsave(&consolelock, flags); - - /* Make sure this is a good virtual tty */ - if (port >= VTTY_PORTS) { - event->xRc = HvLpEvent_Rc_SubtypeError; - cevent->subtype_result_code = viorc_openRejected; - /* - * Flag state here since we can't printk while holding - * the consolelock spinlock. - */ - reject = 1; - } else { - pi = &port_info[port]; - if ((pi->lp != HvLpIndexInvalid) && - (pi->lp != event->xSourceLp)) { - /* - * If this is tty is already connected to a different - * partition, fail. - */ - event->xRc = HvLpEvent_Rc_SubtypeError; - cevent->subtype_result_code = viorc_openRejected; - reject = 2; - } else { - pi->lp = event->xSourceLp; - event->xRc = HvLpEvent_Rc_Good; - cevent->subtype_result_code = viorc_good; - pi->seq = pi->ack = 0; - } - } - - spin_unlock_irqrestore(&consolelock, flags); - - if (reject == 1) - printk(KERN_WARNING "hvc: open rejected: bad virtual tty.\n"); - else if (reject == 2) - printk(KERN_WARNING "hvc: open rejected: console in exclusive " - "use by another partition.\n"); - - /* Return the acknowledgement */ - HvCallEvent_ackLpEvent(event); -} - -/* - * Handle a close charLpEvent. This should ONLY be an Interrupt because the - * virtual console should never actually issue a close event to the hypervisor - * because the virtual console never goes away. A close event coming from the - * hypervisor simply means that there are no client consoles connected to the - * virtual console. - */ -static void hvc_close_event(struct HvLpEvent *event) -{ - unsigned long flags; - struct viocharlpevent *cevent = (struct viocharlpevent *)event; - u8 port = cevent->virtual_device; - - if (!hvlpevent_is_int(event)) { - printk(KERN_WARNING - "hvc: got unexpected close acknowledgement\n"); - return; - } - - if (port >= VTTY_PORTS) { - printk(KERN_WARNING - "hvc: close message from invalid virtual device.\n"); - return; - } - - /* For closes, just mark the console partition invalid */ - spin_lock_irqsave(&consolelock, flags); - - if (port_info[port].lp == event->xSourceLp) - port_info[port].lp = HvLpIndexInvalid; - - spin_unlock_irqrestore(&consolelock, flags); -} - -static void hvc_data_event(struct HvLpEvent *event) -{ - unsigned long flags; - struct viocharlpevent *cevent = (struct viocharlpevent *)event; - struct port_info *pi; - int n; - u8 port = cevent->virtual_device; - - if (port >= VTTY_PORTS) { - printk(KERN_WARNING "hvc: data on invalid virtual device %d\n", - port); - return; - } - if (cevent->len == 0) - return; - - /* - * Change 05/01/2003 - Ryan Arnold: If a partition other than - * the current exclusive partition tries to send us data - * events then just drop them on the floor because we don't - * want his stinking data. He isn't authorized to receive - * data because he wasn't the first one to get the console, - * therefore he shouldn't be allowed to send data either. - * This will work without an iSeries fix. - */ - pi = &port_info[port]; - if (pi->lp != event->xSourceLp) - return; - - spin_lock_irqsave(&consolelock, flags); - - n = IN_BUF_SIZE - pi->in_end; - if (n > cevent->len) - n = cevent->len; - if (n > 0) { - memcpy(&pi->in_buf[pi->in_end], cevent->data, n); - pi->in_end += n; - } - spin_unlock_irqrestore(&consolelock, flags); - if (n == 0) - printk(KERN_WARNING "hvc: input buffer overflow\n"); -} - -static void hvc_ack_event(struct HvLpEvent *event) -{ - struct viocharlpevent *cevent = (struct viocharlpevent *)event; - unsigned long flags; - u8 port = cevent->virtual_device; - - if (port >= VTTY_PORTS) { - printk(KERN_WARNING "hvc: data on invalid virtual device\n"); - return; - } - - spin_lock_irqsave(&consolelock, flags); - port_info[port].ack = event->xCorrelationToken; - spin_unlock_irqrestore(&consolelock, flags); -} - -static void hvc_config_event(struct HvLpEvent *event) -{ - struct viocharlpevent *cevent = (struct viocharlpevent *)event; - - if (cevent->data[0] == 0x01) - printk(KERN_INFO "hvc: window resized to %d: %d: %d: %d\n", - cevent->data[1], cevent->data[2], - cevent->data[3], cevent->data[4]); - else - printk(KERN_WARNING "hvc: unknown config event\n"); -} - -static void hvc_handle_event(struct HvLpEvent *event) -{ - int charminor; - - if (event == NULL) - return; - - charminor = event->xSubtype & VIOMINOR_SUBTYPE_MASK; - switch (charminor) { - case viocharopen: - hvc_open_event(event); - break; - case viocharclose: - hvc_close_event(event); - break; - case viochardata: - hvc_data_event(event); - break; - case viocharack: - hvc_ack_event(event); - break; - case viocharconfig: - hvc_config_event(event); - break; - default: - if (hvlpevent_is_int(event) && hvlpevent_need_ack(event)) { - event->xRc = HvLpEvent_Rc_InvalidSubtype; - HvCallEvent_ackLpEvent(event); - } - } -} - -static int __init send_open(HvLpIndex remoteLp, void *sem) -{ - return HvCallEvent_signalLpEventFast(remoteLp, - HvLpEvent_Type_VirtualIo, - viomajorsubtype_chario | viocharopen, - HvLpEvent_AckInd_DoAck, HvLpEvent_AckType_ImmediateAck, - viopath_sourceinst(remoteLp), - viopath_targetinst(remoteLp), - (u64)(unsigned long)sem, VIOVERSION << 16, - 0, 0, 0, 0); -} - -static int __init hvc_vio_init(void) -{ - atomic_t wait_flag; - int rc; - - if (!firmware_has_feature(FW_FEATURE_ISERIES)) - return -EIO; - - /* +2 for fudge */ - rc = viopath_open(HvLpConfig_getPrimaryLpIndex(), - viomajorsubtype_chario, VIOCHAR_WINDOW + 2); - if (rc) - printk(KERN_WARNING "hvc: error opening to primary %d\n", rc); - - if (viopath_hostLp == HvLpIndexInvalid) - vio_set_hostlp(); - - /* - * And if the primary is not the same as the hosting LP, open to the - * hosting lp - */ - if ((viopath_hostLp != HvLpIndexInvalid) && - (viopath_hostLp != HvLpConfig_getPrimaryLpIndex())) { - printk(KERN_INFO "hvc: open path to hosting (%d)\n", - viopath_hostLp); - rc = viopath_open(viopath_hostLp, viomajorsubtype_chario, - VIOCHAR_WINDOW + 2); /* +2 for fudge */ - if (rc) - printk(KERN_WARNING - "error opening to partition %d: %d\n", - viopath_hostLp, rc); - } - - if (vio_setHandler(viomajorsubtype_chario, hvc_handle_event) < 0) - printk(KERN_WARNING - "hvc: error seting handler for console events!\n"); - - /* - * First, try to open the console to the hosting lp. - * Wait on a semaphore for the response. - */ - atomic_set(&wait_flag, 0); - if ((viopath_isactive(viopath_hostLp)) && - (send_open(viopath_hostLp, &wait_flag) == 0)) { - printk(KERN_INFO "hvc: hosting partition %d\n", viopath_hostLp); - while (atomic_read(&wait_flag) == 0) - mb(); - atomic_set(&wait_flag, 0); - } - - /* - * If we don't have an active console, try the primary - */ - if ((!viopath_isactive(port_info[0].lp)) && - (viopath_isactive(HvLpConfig_getPrimaryLpIndex())) && - (send_open(HvLpConfig_getPrimaryLpIndex(), &wait_flag) == 0)) { - printk(KERN_INFO "hvc: opening console to primary partition\n"); - while (atomic_read(&wait_flag) == 0) - mb(); - } - - /* Register as a vio device to receive callbacks */ - rc = vio_register_driver(&hvc_vio_driver); - - return rc; -} -module_init(hvc_vio_init); /* after drivers/char/hvc_console.c */ - -static void __exit hvc_vio_exit(void) -{ - vio_unregister_driver(&hvc_vio_driver); -} -module_exit(hvc_vio_exit); - -/* the device tree order defines our numbering */ -static int __init hvc_find_vtys(void) -{ - struct device_node *vty; - int num_found = 0; - - for (vty = of_find_node_by_name(NULL, "vty"); vty != NULL; - vty = of_find_node_by_name(vty, "vty")) { - const uint32_t *vtermno; - - /* We have statically defined space for only a certain number - * of console adapters. - */ - if ((num_found >= MAX_NR_HVC_CONSOLES) || - (num_found >= VTTY_PORTS)) { - of_node_put(vty); - break; - } - - vtermno = of_get_property(vty, "reg", NULL); - if (!vtermno) - continue; - - if (!of_device_is_compatible(vty, "IBM,iSeries-vty")) - continue; - - if (num_found == 0) - add_preferred_console("hvc", 0, NULL); - hvc_instantiate(*vtermno, num_found, &hvc_get_put_ops); - ++num_found; - } - - return num_found; -} -console_initcall(hvc_find_vtys); diff --git a/drivers/tty/hvc/hvc_rtas.c b/drivers/tty/hvc/hvc_rtas.c index 61c4a61558d..0069bb86ba4 100644 --- a/drivers/tty/hvc/hvc_rtas.c +++ b/drivers/tty/hvc/hvc_rtas.c @@ -94,7 +94,7 @@ static int __init hvc_rtas_init(void) /* Allocate an hvc_struct for the console device we instantiated * earlier. Save off hp so that we can return it on exit */ - hp = hvc_alloc(hvc_rtas_cookie, NO_IRQ, &hvc_rtas_get_put_ops, 16); + hp = hvc_alloc(hvc_rtas_cookie, 0, &hvc_rtas_get_put_ops, 16); if (IS_ERR(hp)) return PTR_ERR(hp); diff --git a/drivers/tty/hvc/hvc_udbg.c b/drivers/tty/hvc/hvc_udbg.c index b0957e61a7b..72228276fe3 100644 --- a/drivers/tty/hvc/hvc_udbg.c +++ b/drivers/tty/hvc/hvc_udbg.c @@ -36,7 +36,7 @@ static int hvc_udbg_put(uint32_t vtermno, const char *buf, int count) { int i; - for (i = 0; i < count; i++) + for (i = 0; i < count && udbg_putc; i++) udbg_putc(buf[i]); return i; @@ -67,9 +67,12 @@ static int __init hvc_udbg_init(void) { struct hvc_struct *hp; + if (!udbg_putc) + return -ENODEV; + BUG_ON(hvc_udbg_dev); - hp = hvc_alloc(0, NO_IRQ, &hvc_udbg_ops, 16); + hp = hvc_alloc(0, 0, &hvc_udbg_ops, 16); if (IS_ERR(hp)) return PTR_ERR(hp); @@ -88,6 +91,9 @@ module_exit(hvc_udbg_exit); static int __init hvc_udbg_console_init(void) { + if (!udbg_putc) + return -ENODEV; + hvc_instantiate(0, 0, &hvc_udbg_ops); add_preferred_console("hvc", 0, NULL); diff --git a/drivers/tty/hvc/hvc_vio.c b/drivers/tty/hvc/hvc_vio.c index fc3c3ad6c07..ee307799271 100644 --- a/drivers/tty/hvc/hvc_vio.c +++ b/drivers/tty/hvc/hvc_vio.c @@ -46,7 +46,6 @@ #include <asm/hvconsole.h> #include <asm/vio.h> #include <asm/prom.h> -#include <asm/firmware.h> #include <asm/hvsi.h> #include <asm/udbg.h> @@ -311,20 +310,14 @@ static int __devexit hvc_vio_remove(struct vio_dev *vdev) static struct vio_driver hvc_vio_driver = { .id_table = hvc_driver_table, .probe = hvc_vio_probe, - .remove = __devexit_p(hvc_vio_remove), - .driver = { - .name = hvc_driver_name, - .owner = THIS_MODULE, - } + .remove = hvc_vio_remove, + .name = hvc_driver_name, }; static int __init hvc_vio_init(void) { int rc; - if (firmware_has_feature(FW_FEATURE_ISERIES)) - return -EIO; - /* Register as a vio device to receive callbacks */ rc = vio_register_driver(&hvc_vio_driver); diff --git a/drivers/tty/hvc/hvc_xen.c b/drivers/tty/hvc/hvc_xen.c index 52fdf60bdbe..83d5c88e716 100644 --- a/drivers/tty/hvc/hvc_xen.c +++ b/drivers/tty/hvc/hvc_xen.c @@ -23,44 +23,74 @@ #include <linux/err.h> #include <linux/init.h> #include <linux/types.h> +#include <linux/list.h> +#include <asm/io.h> #include <asm/xen/hypervisor.h> #include <xen/xen.h> +#include <xen/interface/xen.h> +#include <xen/hvm.h> +#include <xen/grant_table.h> #include <xen/page.h> #include <xen/events.h> #include <xen/interface/io/console.h> #include <xen/hvc-console.h> +#include <xen/xenbus.h> #include "hvc_console.h" #define HVC_COOKIE 0x58656e /* "Xen" in hex */ -static struct hvc_struct *hvc; -static int xencons_irq; +struct xencons_info { + struct list_head list; + struct xenbus_device *xbdev; + struct xencons_interface *intf; + unsigned int evtchn; + struct hvc_struct *hvc; + int irq; + int vtermno; + grant_ref_t gntref; +}; + +static LIST_HEAD(xenconsoles); +static DEFINE_SPINLOCK(xencons_lock); /* ------------------------------------------------------------------ */ -static unsigned long console_pfn = ~0ul; +static struct xencons_info *vtermno_to_xencons(int vtermno) +{ + struct xencons_info *entry, *n, *ret = NULL; + + if (list_empty(&xenconsoles)) + return NULL; + + list_for_each_entry_safe(entry, n, &xenconsoles, list) { + if (entry->vtermno == vtermno) { + ret = entry; + break; + } + } + + return ret; +} -static inline struct xencons_interface *xencons_interface(void) +static inline int xenbus_devid_to_vtermno(int devid) { - if (console_pfn == ~0ul) - return mfn_to_virt(xen_start_info->console.domU.mfn); - else - return __va(console_pfn << PAGE_SHIFT); + return devid + HVC_COOKIE; } -static inline void notify_daemon(void) +static inline void notify_daemon(struct xencons_info *cons) { /* Use evtchn: this is called early, before irq is set up. */ - notify_remote_via_evtchn(xen_start_info->console.domU.evtchn); + notify_remote_via_evtchn(cons->evtchn); } -static int __write_console(const char *data, int len) +static int __write_console(struct xencons_info *xencons, + const char *data, int len) { - struct xencons_interface *intf = xencons_interface(); XENCONS_RING_IDX cons, prod; + struct xencons_interface *intf = xencons->intf; int sent = 0; cons = intf->out_cons; @@ -75,13 +105,16 @@ static int __write_console(const char *data, int len) intf->out_prod = prod; if (sent) - notify_daemon(); + notify_daemon(xencons); return sent; } static int domU_write_console(uint32_t vtermno, const char *data, int len) { int ret = len; + struct xencons_info *cons = vtermno_to_xencons(vtermno); + if (cons == NULL) + return -EINVAL; /* * Make sure the whole buffer is emitted, polling if @@ -90,7 +123,7 @@ static int domU_write_console(uint32_t vtermno, const char *data, int len) * kernel is crippled. */ while (len) { - int sent = __write_console(data, len); + int sent = __write_console(cons, data, len); data += sent; len -= sent; @@ -104,9 +137,13 @@ static int domU_write_console(uint32_t vtermno, const char *data, int len) static int domU_read_console(uint32_t vtermno, char *buf, int len) { - struct xencons_interface *intf = xencons_interface(); + struct xencons_interface *intf; XENCONS_RING_IDX cons, prod; int recv = 0; + struct xencons_info *xencons = vtermno_to_xencons(vtermno); + if (xencons == NULL) + return -EINVAL; + intf = xencons->intf; cons = intf->in_cons; prod = intf->in_prod; @@ -119,7 +156,7 @@ static int domU_read_console(uint32_t vtermno, char *buf, int len) mb(); /* read ring before consuming */ intf->in_cons = cons; - notify_daemon(); + notify_daemon(xencons); return recv; } @@ -157,68 +194,407 @@ static struct hv_ops dom0_hvc_ops = { .notifier_hangup = notifier_hangup_irq, }; -static int __init xen_hvc_init(void) +static int xen_hvm_console_init(void) +{ + int r; + uint64_t v = 0; + unsigned long mfn; + struct xencons_info *info; + + if (!xen_hvm_domain()) + return -ENODEV; + + info = vtermno_to_xencons(HVC_COOKIE); + if (!info) { + info = kzalloc(sizeof(struct xencons_info), GFP_KERNEL | __GFP_ZERO); + if (!info) + return -ENOMEM; + } + + /* already configured */ + if (info->intf != NULL) + return 0; + + r = hvm_get_parameter(HVM_PARAM_CONSOLE_EVTCHN, &v); + if (r < 0) { + kfree(info); + return -ENODEV; + } + info->evtchn = v; + hvm_get_parameter(HVM_PARAM_CONSOLE_PFN, &v); + if (r < 0) { + kfree(info); + return -ENODEV; + } + mfn = v; + info->intf = ioremap(mfn << PAGE_SHIFT, PAGE_SIZE); + if (info->intf == NULL) { + kfree(info); + return -ENODEV; + } + info->vtermno = HVC_COOKIE; + + spin_lock(&xencons_lock); + list_add_tail(&info->list, &xenconsoles); + spin_unlock(&xencons_lock); + + return 0; +} + +static int xen_pv_console_init(void) { - struct hvc_struct *hp; - struct hv_ops *ops; + struct xencons_info *info; if (!xen_pv_domain()) return -ENODEV; - if (xen_initial_domain()) { - ops = &dom0_hvc_ops; - xencons_irq = bind_virq_to_irq(VIRQ_CONSOLE, 0); - } else { - if (!xen_start_info->console.domU.evtchn) - return -ENODEV; + if (!xen_start_info->console.domU.evtchn) + return -ENODEV; - ops = &domU_hvc_ops; - xencons_irq = bind_evtchn_to_irq(xen_start_info->console.domU.evtchn); + info = vtermno_to_xencons(HVC_COOKIE); + if (!info) { + info = kzalloc(sizeof(struct xencons_info), GFP_KERNEL | __GFP_ZERO); + if (!info) + return -ENOMEM; } - if (xencons_irq < 0) - xencons_irq = 0; /* NO_IRQ */ - else - irq_set_noprobe(xencons_irq); - hp = hvc_alloc(HVC_COOKIE, xencons_irq, ops, 256); - if (IS_ERR(hp)) - return PTR_ERR(hp); + /* already configured */ + if (info->intf != NULL) + return 0; + + info->evtchn = xen_start_info->console.domU.evtchn; + info->intf = mfn_to_virt(xen_start_info->console.domU.mfn); + info->vtermno = HVC_COOKIE; + + spin_lock(&xencons_lock); + list_add_tail(&info->list, &xenconsoles); + spin_unlock(&xencons_lock); + + return 0; +} + +static int xen_initial_domain_console_init(void) +{ + struct xencons_info *info; + + if (!xen_initial_domain()) + return -ENODEV; + + info = vtermno_to_xencons(HVC_COOKIE); + if (!info) { + info = kzalloc(sizeof(struct xencons_info), GFP_KERNEL | __GFP_ZERO); + if (!info) + return -ENOMEM; + } - hvc = hp; + info->irq = bind_virq_to_irq(VIRQ_CONSOLE, 0); + info->vtermno = HVC_COOKIE; - console_pfn = mfn_to_pfn(xen_start_info->console.domU.mfn); + spin_lock(&xencons_lock); + list_add_tail(&info->list, &xenconsoles); + spin_unlock(&xencons_lock); return 0; } void xen_console_resume(void) { - if (xencons_irq) - rebind_evtchn_irq(xen_start_info->console.domU.evtchn, xencons_irq); + struct xencons_info *info = vtermno_to_xencons(HVC_COOKIE); + if (info != NULL && info->irq) + rebind_evtchn_irq(info->evtchn, info->irq); +} + +static void xencons_disconnect_backend(struct xencons_info *info) +{ + if (info->irq > 0) + unbind_from_irqhandler(info->irq, NULL); + info->irq = 0; + if (info->evtchn > 0) + xenbus_free_evtchn(info->xbdev, info->evtchn); + info->evtchn = 0; + if (info->gntref > 0) + gnttab_free_grant_references(info->gntref); + info->gntref = 0; + if (info->hvc != NULL) + hvc_remove(info->hvc); + info->hvc = NULL; +} + +static void xencons_free(struct xencons_info *info) +{ + free_page((unsigned long)info->intf); + info->intf = NULL; + info->vtermno = 0; + kfree(info); +} + +static int xen_console_remove(struct xencons_info *info) +{ + xencons_disconnect_backend(info); + spin_lock(&xencons_lock); + list_del(&info->list); + spin_unlock(&xencons_lock); + if (info->xbdev != NULL) + xencons_free(info); + else { + if (xen_hvm_domain()) + iounmap(info->intf); + kfree(info); + } + return 0; +} + +#ifdef CONFIG_HVC_XEN_FRONTEND +static struct xenbus_driver xencons_driver; + +static int xencons_remove(struct xenbus_device *dev) +{ + return xen_console_remove(dev_get_drvdata(&dev->dev)); +} + +static int xencons_connect_backend(struct xenbus_device *dev, + struct xencons_info *info) +{ + int ret, evtchn, devid, ref, irq; + struct xenbus_transaction xbt; + grant_ref_t gref_head; + unsigned long mfn; + + ret = xenbus_alloc_evtchn(dev, &evtchn); + if (ret) + return ret; + info->evtchn = evtchn; + irq = bind_evtchn_to_irq(evtchn); + if (irq < 0) + return irq; + info->irq = irq; + devid = dev->nodename[strlen(dev->nodename) - 1] - '0'; + info->hvc = hvc_alloc(xenbus_devid_to_vtermno(devid), + irq, &domU_hvc_ops, 256); + if (IS_ERR(info->hvc)) + return PTR_ERR(info->hvc); + if (xen_pv_domain()) + mfn = virt_to_mfn(info->intf); + else + mfn = __pa(info->intf) >> PAGE_SHIFT; + ret = gnttab_alloc_grant_references(1, &gref_head); + if (ret < 0) + return ret; + info->gntref = gref_head; + ref = gnttab_claim_grant_reference(&gref_head); + if (ref < 0) + return ref; + gnttab_grant_foreign_access_ref(ref, info->xbdev->otherend_id, + mfn, 0); + + again: + ret = xenbus_transaction_start(&xbt); + if (ret) { + xenbus_dev_fatal(dev, ret, "starting transaction"); + return ret; + } + ret = xenbus_printf(xbt, dev->nodename, "ring-ref", "%d", ref); + if (ret) + goto error_xenbus; + ret = xenbus_printf(xbt, dev->nodename, "port", "%u", + evtchn); + if (ret) + goto error_xenbus; + ret = xenbus_printf(xbt, dev->nodename, "type", "ioemu"); + if (ret) + goto error_xenbus; + ret = xenbus_transaction_end(xbt, 0); + if (ret) { + if (ret == -EAGAIN) + goto again; + xenbus_dev_fatal(dev, ret, "completing transaction"); + return ret; + } + + xenbus_switch_state(dev, XenbusStateInitialised); + return 0; + + error_xenbus: + xenbus_transaction_end(xbt, 1); + xenbus_dev_fatal(dev, ret, "writing xenstore"); + return ret; +} + +static int __devinit xencons_probe(struct xenbus_device *dev, + const struct xenbus_device_id *id) +{ + int ret, devid; + struct xencons_info *info; + + devid = dev->nodename[strlen(dev->nodename) - 1] - '0'; + if (devid == 0) + return -ENODEV; + + info = kzalloc(sizeof(struct xencons_info), GFP_KERNEL | __GFP_ZERO); + if (!info) + goto error_nomem; + dev_set_drvdata(&dev->dev, info); + info->xbdev = dev; + info->vtermno = xenbus_devid_to_vtermno(devid); + info->intf = (void *)__get_free_page(GFP_KERNEL | __GFP_ZERO); + if (!info->intf) + goto error_nomem; + + ret = xencons_connect_backend(dev, info); + if (ret < 0) + goto error; + spin_lock(&xencons_lock); + list_add_tail(&info->list, &xenconsoles); + spin_unlock(&xencons_lock); + + return 0; + + error_nomem: + ret = -ENOMEM; + xenbus_dev_fatal(dev, ret, "allocating device memory"); + error: + xencons_disconnect_backend(info); + xencons_free(info); + return ret; +} + +static int xencons_resume(struct xenbus_device *dev) +{ + struct xencons_info *info = dev_get_drvdata(&dev->dev); + + xencons_disconnect_backend(info); + memset(info->intf, 0, PAGE_SIZE); + return xencons_connect_backend(dev, info); +} + +static void xencons_backend_changed(struct xenbus_device *dev, + enum xenbus_state backend_state) +{ + switch (backend_state) { + case XenbusStateReconfiguring: + case XenbusStateReconfigured: + case XenbusStateInitialising: + case XenbusStateInitialised: + case XenbusStateUnknown: + case XenbusStateClosed: + break; + + case XenbusStateInitWait: + break; + + case XenbusStateConnected: + xenbus_switch_state(dev, XenbusStateConnected); + break; + + case XenbusStateClosing: + xenbus_frontend_closed(dev); + break; + } +} + +static const struct xenbus_device_id xencons_ids[] = { + { "console" }, + { "" } +}; + + +static DEFINE_XENBUS_DRIVER(xencons, "xenconsole", + .probe = xencons_probe, + .remove = xencons_remove, + .resume = xencons_resume, + .otherend_changed = xencons_backend_changed, +); +#endif /* CONFIG_HVC_XEN_FRONTEND */ + +static int __init xen_hvc_init(void) +{ + int r; + struct xencons_info *info; + const struct hv_ops *ops; + + if (!xen_domain()) + return -ENODEV; + + if (xen_initial_domain()) { + ops = &dom0_hvc_ops; + r = xen_initial_domain_console_init(); + if (r < 0) + return r; + info = vtermno_to_xencons(HVC_COOKIE); + } else { + ops = &domU_hvc_ops; + if (xen_hvm_domain()) + r = xen_hvm_console_init(); + else + r = xen_pv_console_init(); + if (r < 0) + return r; + + info = vtermno_to_xencons(HVC_COOKIE); + info->irq = bind_evtchn_to_irq(info->evtchn); + } + if (info->irq < 0) + info->irq = 0; /* NO_IRQ */ + else + irq_set_noprobe(info->irq); + + info->hvc = hvc_alloc(HVC_COOKIE, info->irq, ops, 256); + if (IS_ERR(info->hvc)) { + r = PTR_ERR(info->hvc); + spin_lock(&xencons_lock); + list_del(&info->list); + spin_unlock(&xencons_lock); + if (info->irq) + unbind_from_irqhandler(info->irq, NULL); + kfree(info); + return r; + } + + r = 0; +#ifdef CONFIG_HVC_XEN_FRONTEND + r = xenbus_register_frontend(&xencons_driver); +#endif + return r; } static void __exit xen_hvc_fini(void) { - if (hvc) - hvc_remove(hvc); + struct xencons_info *entry, *next; + + if (list_empty(&xenconsoles)) + return; + + list_for_each_entry_safe(entry, next, &xenconsoles, list) { + xen_console_remove(entry); + } } static int xen_cons_init(void) { - struct hv_ops *ops; + const struct hv_ops *ops; - if (!xen_pv_domain()) + if (!xen_domain()) return 0; if (xen_initial_domain()) ops = &dom0_hvc_ops; - else + else { + int r; ops = &domU_hvc_ops; + if (xen_hvm_domain()) + r = xen_hvm_console_init(); + else + r = xen_pv_console_init(); + if (r < 0) + return r; + } + hvc_instantiate(HVC_COOKIE, 0, ops); return 0; } + module_init(xen_hvc_init); module_exit(xen_hvc_fini); console_initcall(xen_cons_init); @@ -230,6 +606,9 @@ static void xenboot_write_console(struct console *console, const char *string, unsigned int linelen, off = 0; const char *pos; + if (!xen_pv_domain()) + return; + dom0_write_console(0, string, len); if (xen_initial_domain()) diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c index b9040bec36b..3436436fe2d 100644 --- a/drivers/tty/hvc/hvcs.c +++ b/drivers/tty/hvc/hvcs.c @@ -879,10 +879,7 @@ static struct vio_driver hvcs_vio_driver = { .id_table = hvcs_driver_table, .probe = hvcs_probe, .remove = __devexit_p(hvcs_remove), - .driver = { - .name = hvcs_driver_name, - .owner = THIS_MODULE, - } + .name = hvcs_driver_name, }; /* Only called from hvcs_get_pi please */ @@ -1090,27 +1087,23 @@ static int hvcs_enable_device(struct hvcs_struct *hvcsd, uint32_t unit_address, */ static struct hvcs_struct *hvcs_get_by_index(int index) { - struct hvcs_struct *hvcsd = NULL; + struct hvcs_struct *hvcsd; unsigned long flags; spin_lock(&hvcs_structs_lock); - /* We can immediately discard OOB requests */ - if (index >= 0 && index < HVCS_MAX_SERVER_ADAPTERS) { - list_for_each_entry(hvcsd, &hvcs_structs, next) { - spin_lock_irqsave(&hvcsd->lock, flags); - if (hvcsd->index == index) { - kref_get(&hvcsd->kref); - spin_unlock_irqrestore(&hvcsd->lock, flags); - spin_unlock(&hvcs_structs_lock); - return hvcsd; - } + list_for_each_entry(hvcsd, &hvcs_structs, next) { + spin_lock_irqsave(&hvcsd->lock, flags); + if (hvcsd->index == index) { + kref_get(&hvcsd->kref); spin_unlock_irqrestore(&hvcsd->lock, flags); + spin_unlock(&hvcs_structs_lock); + return hvcsd; } - hvcsd = NULL; + spin_unlock_irqrestore(&hvcsd->lock, flags); } - spin_unlock(&hvcs_structs_lock); - return hvcsd; + + return NULL; } /* @@ -1203,7 +1196,7 @@ static void hvcs_close(struct tty_struct *tty, struct file *filp) { struct hvcs_struct *hvcsd; unsigned long flags; - int irq = NO_IRQ; + int irq; /* * Is someone trying to close the file associated with this device after @@ -1264,7 +1257,7 @@ static void hvcs_hangup(struct tty_struct * tty) struct hvcs_struct *hvcsd = tty->driver_data; unsigned long flags; int temp_open_count; - int irq = NO_IRQ; + int irq; spin_lock_irqsave(&hvcsd->lock, flags); /* Preserve this so that we know how many kref refs to put */ @@ -1499,8 +1492,6 @@ static int __devinit hvcs_initialize(void) goto index_fail; } - hvcs_tty_driver->owner = THIS_MODULE; - hvcs_tty_driver->driver_name = hvcs_driver_name; hvcs_tty_driver->name = hvcs_device_node; diff --git a/drivers/tty/hvc/hvsi.c b/drivers/tty/hvc/hvsi.c index cdfa3e02d62..a7488b74864 100644 --- a/drivers/tty/hvc/hvsi.c +++ b/drivers/tty/hvc/hvsi.c @@ -737,14 +737,11 @@ static int hvsi_open(struct tty_struct *tty, struct file *filp) { struct hvsi_struct *hp; unsigned long flags; - int line = tty->index; int ret; pr_debug("%s\n", __func__); - if (line < 0 || line >= hvsi_count) - return -ENODEV; - hp = &hvsi_ports[line]; + hp = &hvsi_ports[tty->index]; tty->driver_data = hp; @@ -1088,7 +1085,6 @@ static int __init hvsi_init(void) if (!hvsi_driver) return -ENOMEM; - hvsi_driver->owner = THIS_MODULE; hvsi_driver->driver_name = "hvsi"; hvsi_driver->name = "hvsi"; hvsi_driver->major = HVSI_MAJOR; @@ -1237,7 +1233,7 @@ static int __init hvsi_console_init(void) hp->state = HVSI_CLOSED; hp->vtermno = *vtermno; hp->virq = irq_create_mapping(NULL, irq[0]); - if (hp->virq == NO_IRQ) { + if (hp->virq == 0) { printk(KERN_ERR "%s: couldn't create irq mapping for 0x%x\n", __func__, irq[0]); continue; diff --git a/drivers/tty/ipwireless/network.c b/drivers/tty/ipwireless/network.c index f7daeea598e..57c8b481113 100644 --- a/drivers/tty/ipwireless/network.c +++ b/drivers/tty/ipwireless/network.c @@ -22,7 +22,7 @@ #include <linux/ppp_channel.h> #include <linux/ppp_defs.h> #include <linux/slab.h> -#include <linux/if_ppp.h> +#include <linux/ppp-ioctl.h> #include <linux/skbuff.h> #include "network.h" diff --git a/drivers/tty/ipwireless/tty.c b/drivers/tty/ipwireless/tty.c index ef92869502a..4daf962f705 100644 --- a/drivers/tty/ipwireless/tty.c +++ b/drivers/tty/ipwireless/tty.c @@ -21,7 +21,7 @@ #include <linux/mutex.h> #include <linux/ppp_defs.h> #include <linux/if.h> -#include <linux/if_ppp.h> +#include <linux/ppp-ioctl.h> #include <linux/sched.h> #include <linux/serial.h> #include <linux/slab.h> @@ -90,33 +90,23 @@ static void report_deregistering(struct ipw_tty *tty) tty->index); } -static struct ipw_tty *get_tty(int minor) +static struct ipw_tty *get_tty(int index) { - if (minor < ipw_tty_driver->minor_start - || minor >= ipw_tty_driver->minor_start + - IPWIRELESS_PCMCIA_MINORS) + /* + * The 'ras_raw' channel is only available when 'loopback' mode + * is enabled. + * Number of minor starts with 16 (_RANGE * _RAS_RAW). + */ + if (!ipwireless_loopback && index >= + IPWIRELESS_PCMCIA_MINOR_RANGE * TTYTYPE_RAS_RAW) return NULL; - else { - int minor_offset = minor - ipw_tty_driver->minor_start; - - /* - * The 'ras_raw' channel is only available when 'loopback' mode - * is enabled. - * Number of minor starts with 16 (_RANGE * _RAS_RAW). - */ - if (!ipwireless_loopback && - minor_offset >= - IPWIRELESS_PCMCIA_MINOR_RANGE * TTYTYPE_RAS_RAW) - return NULL; - - return ttys[minor_offset]; - } + + return ttys[index]; } static int ipw_open(struct tty_struct *linux_tty, struct file *filp) { - int minor = linux_tty->index; - struct ipw_tty *tty = get_tty(minor); + struct ipw_tty *tty = get_tty(linux_tty->index); if (!tty) return -ENODEV; @@ -510,7 +500,7 @@ static int add_tty(int j, ipwireless_associate_network_tty(network, secondary_channel_idx, ttys[j]); - if (get_tty(j + ipw_tty_driver->minor_start) == ttys[j]) + if (get_tty(j) == ttys[j]) report_registering(ttys[j]); return 0; } @@ -570,7 +560,7 @@ void ipwireless_tty_free(struct ipw_tty *tty) if (ttyj) { mutex_lock(&ttyj->ipw_tty_mutex); - if (get_tty(j + ipw_tty_driver->minor_start) == ttyj) + if (get_tty(j) == ttyj) report_deregistering(ttyj); ttyj->closing = 1; if (ttyj->linux_tty != NULL) { @@ -614,7 +604,6 @@ int ipwireless_tty_init(void) if (!ipw_tty_driver) return -ENOMEM; - ipw_tty_driver->owner = THIS_MODULE; ipw_tty_driver->driver_name = IPWIRELESS_PCCARD_NAME; ipw_tty_driver->name = "ttyIPWp"; ipw_tty_driver->major = 0; diff --git a/drivers/tty/isicom.c b/drivers/tty/isicom.c index e5c295ab5de..e1235accab7 100644 --- a/drivers/tty/isicom.c +++ b/drivers/tty/isicom.c @@ -102,7 +102,7 @@ * You can find the original tools for this direct from Multitech * ftp://ftp.multitech.com/ISI-Cards/ * - * Having installed the cards the module options (/etc/modprobe.conf) + * Having installed the cards the module options (/etc/modprobe.d/) * * options isicom io=card1,card2,card3,card4 irq=card1,card2,card3,card4 * @@ -133,7 +133,6 @@ #include <linux/uaccess.h> #include <linux/io.h> -#include <asm/system.h> #include <linux/pci.h> @@ -849,8 +848,6 @@ static struct tty_port *isicom_find_port(struct tty_struct *tty) unsigned int board; int line = tty->index; - if (line < 0 || line > PORT_COUNT-1) - return NULL; board = BOARD(line); card = &isi_card[board]; @@ -1678,7 +1675,6 @@ static int __init isicom_init(void) goto error; } - isicom_normal->owner = THIS_MODULE; isicom_normal->name = "ttyM"; isicom_normal->major = ISICOM_NMAJOR; isicom_normal->minor_start = 0; diff --git a/drivers/tty/moxa.c b/drivers/tty/moxa.c index d15a071b1a5..324467d28a5 100644 --- a/drivers/tty/moxa.c +++ b/drivers/tty/moxa.c @@ -46,7 +46,6 @@ #include <linux/slab.h> #include <linux/ratelimit.h> -#include <asm/system.h> #include <asm/io.h> #include <asm/uaccess.h> @@ -1036,7 +1035,6 @@ static int __init moxa_init(void) if (!moxaDriver) return -ENOMEM; - moxaDriver->owner = THIS_MODULE; moxaDriver->name = "ttyMX"; moxaDriver->major = ttymajor; moxaDriver->minor_start = 0; @@ -1331,7 +1329,7 @@ static void moxa_start(struct tty_struct *tty) if (ch == NULL) return; - if (!(ch->statusflags & TXSTOPPED)) + if (!test_bit(TXSTOPPED, &ch->statusflags)) return; MoxaPortTxEnable(ch); diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c index 8998d527232..c6f372dd562 100644 --- a/drivers/tty/mxser.c +++ b/drivers/tty/mxser.c @@ -41,7 +41,6 @@ #include <linux/slab.h> #include <linux/ratelimit.h> -#include <asm/system.h> #include <asm/io.h> #include <asm/irq.h> #include <asm/uaccess.h> @@ -1010,8 +1009,6 @@ static int mxser_open(struct tty_struct *tty, struct file *filp) line = tty->index; if (line == MXSER_PORTS) return 0; - if (line < 0 || line > MXSER_PORTS) - return -ENODEV; info = &mxser_boards[line / MXSER_PORTS_PER_BOARD].ports[line % MXSER_PORTS_PER_BOARD]; if (!info->ioaddr) return -ENODEV; @@ -2658,12 +2655,9 @@ static int __init mxser_module_init(void) MXSER_VERSION); /* Initialize the tty_driver structure */ - mxvar_sdriver->owner = THIS_MODULE; - mxvar_sdriver->magic = TTY_DRIVER_MAGIC; mxvar_sdriver->name = "ttyMI"; mxvar_sdriver->major = ttymajor; mxvar_sdriver->minor_start = 0; - mxvar_sdriver->num = MXSER_PORTS + 1; mxvar_sdriver->type = TTY_DRIVER_TYPE_SERIAL; mxvar_sdriver->subtype = SERIAL_TYPE_NORMAL; mxvar_sdriver->init_termios = tty_std_termios; diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index fc7bbba585c..c43b683b6eb 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -3120,7 +3120,6 @@ static int __init gsm_init(void) pr_err("gsm_init: tty allocation failed.\n"); return -EINVAL; } - gsm_tty_driver->owner = THIS_MODULE; gsm_tty_driver->driver_name = "gsmtty"; gsm_tty_driver->name = "gsmtty"; gsm_tty_driver->major = 0; /* Dynamic */ diff --git a/drivers/tty/n_hdlc.c b/drivers/tty/n_hdlc.c index a09ce3ef5d7..1b2db9a3038 100644 --- a/drivers/tty/n_hdlc.c +++ b/drivers/tty/n_hdlc.c @@ -102,7 +102,6 @@ #include <linux/if.h> #include <linux/bitops.h> -#include <asm/system.h> #include <asm/termios.h> #include <asm/uaccess.h> diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index d2256d08ee7..94b6eda87af 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -50,7 +50,6 @@ #include <linux/uaccess.h> #include <linux/module.h> -#include <asm/system.h> /* number of characters left in xmit buffer before select has we have room */ #define WAKEUP_CHARS 256 diff --git a/drivers/tty/nozomi.c b/drivers/tty/nozomi.c index fd347ff34d0..e7592f9037d 100644 --- a/drivers/tty/nozomi.c +++ b/drivers/tty/nozomi.c @@ -1602,13 +1602,9 @@ static int ntty_install(struct tty_driver *driver, struct tty_struct *tty) int ret; if (!port || !dc || dc->state != NOZOMI_STATE_READY) return -ENODEV; - ret = tty_init_termios(tty); - if (ret == 0) { - tty_driver_kref_get(driver); - tty->count++; + ret = tty_standard_install(driver, tty); + if (ret == 0) tty->driver_data = port; - driver->ttys[tty->index] = tty; - } return ret; } @@ -1920,7 +1916,6 @@ static __init int nozomi_init(void) if (!ntty_driver) return -ENOMEM; - ntty_driver->owner = THIS_MODULE; ntty_driver->driver_name = NOZOMI_NAME_TTY; ntty_driver->name = "noz"; ntty_driver->major = 0; diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c index d8653ab6f49..eeae7fafe9a 100644 --- a/drivers/tty/pty.c +++ b/drivers/tty/pty.c @@ -21,14 +21,12 @@ #include <linux/major.h> #include <linux/mm.h> #include <linux/init.h> -#include <linux/sysctl.h> #include <linux/device.h> #include <linux/uaccess.h> #include <linux/bitops.h> #include <linux/devpts_fs.h> #include <linux/slab.h> -#include <asm/system.h> #ifdef CONFIG_UNIX98_PTYS static struct tty_driver *ptm_driver; @@ -394,7 +392,6 @@ static void __init legacy_pty_init(void) if (!pty_slave_driver) panic("Couldn't allocate pty slave driver"); - pty_driver->owner = THIS_MODULE; pty_driver->driver_name = "pty_master"; pty_driver->name = "pty"; pty_driver->major = PTY_MASTER_MAJOR; @@ -412,7 +409,6 @@ static void __init legacy_pty_init(void) pty_driver->other = pty_slave_driver; tty_set_operations(pty_driver, &master_pty_ops_bsd); - pty_slave_driver->owner = THIS_MODULE; pty_slave_driver->driver_name = "pty_slave"; pty_slave_driver->name = "ttyp"; pty_slave_driver->major = PTY_SLAVE_MAJOR; @@ -439,55 +435,9 @@ static inline void legacy_pty_init(void) { } /* Unix98 devices */ #ifdef CONFIG_UNIX98_PTYS -/* - * sysctl support for setting limits on the number of Unix98 ptys allocated. - * Otherwise one can eat up all kernel memory by opening /dev/ptmx repeatedly. - */ -int pty_limit = NR_UNIX98_PTY_DEFAULT; -static int pty_limit_min; -static int pty_limit_max = NR_UNIX98_PTY_MAX; -static int pty_count; static struct cdev ptmx_cdev; -static struct ctl_table pty_table[] = { - { - .procname = "max", - .maxlen = sizeof(int), - .mode = 0644, - .data = &pty_limit, - .proc_handler = proc_dointvec_minmax, - .extra1 = &pty_limit_min, - .extra2 = &pty_limit_max, - }, { - .procname = "nr", - .maxlen = sizeof(int), - .mode = 0444, - .data = &pty_count, - .proc_handler = proc_dointvec, - }, - {} -}; - -static struct ctl_table pty_kern_table[] = { - { - .procname = "pty", - .mode = 0555, - .child = pty_table, - }, - {} -}; - -static struct ctl_table pty_root_table[] = { - { - .procname = "kernel", - .mode = 0555, - .child = pty_kern_table, - }, - {} -}; - - static int pty_unix98_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { @@ -515,10 +465,8 @@ static int pty_unix98_ioctl(struct tty_struct *tty, static struct tty_struct *ptm_unix98_lookup(struct tty_driver *driver, struct inode *ptm_inode, int idx) { - struct tty_struct *tty = devpts_get_tty(ptm_inode, idx); - if (tty) - tty = tty->link; - return tty; + /* Master must be open via /dev/ptmx */ + return ERR_PTR(-EIO); } /** @@ -589,7 +537,6 @@ static int pty_unix98_install(struct tty_driver *driver, struct tty_struct *tty) */ tty_driver_kref_get(driver); tty->count++; - pty_count++; return 0; err_free_mem: deinitialize_tty_struct(o_tty); @@ -603,7 +550,6 @@ err_free_tty: static void ptm_unix98_remove(struct tty_driver *driver, struct tty_struct *tty) { - pty_count--; } static void pts_unix98_remove(struct tty_driver *driver, struct tty_struct *tty) @@ -677,7 +623,7 @@ static int ptmx_open(struct inode *inode, struct file *filp) mutex_lock(&tty_mutex); tty_lock(); - tty = tty_init_dev(ptm_driver, index, 1); + tty = tty_init_dev(ptm_driver, index); mutex_unlock(&tty_mutex); if (IS_ERR(tty)) { @@ -722,7 +668,6 @@ static void __init unix98_pty_init(void) if (!pts_driver) panic("Couldn't allocate Unix98 pts driver"); - ptm_driver->owner = THIS_MODULE; ptm_driver->driver_name = "pty_master"; ptm_driver->name = "ptm"; ptm_driver->major = UNIX98_PTY_MASTER_MAJOR; @@ -741,7 +686,6 @@ static void __init unix98_pty_init(void) ptm_driver->other = pts_driver; tty_set_operations(ptm_driver, &ptm_unix98_ops); - pts_driver->owner = THIS_MODULE; pts_driver->driver_name = "pty_slave"; pts_driver->name = "pts"; pts_driver->major = UNIX98_PTY_SLAVE_MAJOR; @@ -762,8 +706,6 @@ static void __init unix98_pty_init(void) if (tty_register_driver(pts_driver)) panic("Couldn't register Unix98 pts driver"); - register_sysctl_table(pty_root_table); - /* Now create the /dev/ptmx special device */ tty_default_fops(&ptmx_fops); ptmx_fops.open = ptmx_open; diff --git a/drivers/tty/rocket.c b/drivers/tty/rocket.c index de88aa5566e..777d5f9cf6c 100644 --- a/drivers/tty/rocket.c +++ b/drivers/tty/rocket.c @@ -892,12 +892,12 @@ static int rp_open(struct tty_struct *tty, struct file *filp) { struct r_port *info; struct tty_port *port; - int line = 0, retval; + int retval; CHANNEL_t *cp; unsigned long page; - line = tty->index; - if (line < 0 || line >= MAX_RP_PORTS || ((info = rp_table[line]) == NULL)) + info = rp_table[tty->index]; + if (info == NULL) return -ENXIO; port = &info->port; @@ -2277,7 +2277,6 @@ static int __init rp_init(void) * driver with the tty layer. */ - rocket_driver->owner = THIS_MODULE; rocket_driver->flags = TTY_DRIVER_DYNAMIC_DEV; rocket_driver->name = "ttyR"; rocket_driver->driver_name = "Comtrol RocketPort"; diff --git a/drivers/tty/serial/21285.c b/drivers/tty/serial/21285.c index 1b37626e8f1..a44345a2dbb 100644 --- a/drivers/tty/serial/21285.c +++ b/drivers/tty/serial/21285.c @@ -16,6 +16,7 @@ #include <asm/irq.h> #include <asm/mach-types.h> +#include <asm/system_info.h> #include <asm/hardware/dec21285.h> #include <mach/hardware.h> @@ -331,7 +332,7 @@ static int serial21285_verify_port(struct uart_port *port, struct serial_struct int ret = 0; if (ser->type != PORT_UNKNOWN && ser->type != PORT_21285) ret = -EINVAL; - if (ser->irq != NO_IRQ) + if (ser->irq <= 0) ret = -EINVAL; if (ser->baud_base != port->uartclk / 16) ret = -EINVAL; @@ -360,7 +361,7 @@ static struct uart_ops serial21285_ops = { static struct uart_port serial21285_port = { .mapbase = 0x42000160, .iotype = UPIO_MEM, - .irq = NO_IRQ, + .irq = 0, .fifosize = 16, .ops = &serial21285_ops, .flags = UPF_BOOT_AUTOCONF, diff --git a/drivers/tty/serial/68328serial.c b/drivers/tty/serial/68328serial.c index a88ef9782a4..5ce782529d6 100644 --- a/drivers/tty/serial/68328serial.c +++ b/drivers/tty/serial/68328serial.c @@ -39,7 +39,6 @@ #include <asm/io.h> #include <asm/irq.h> -#include <asm/system.h> #include <asm/delay.h> #include <asm/uaccess.h> @@ -1190,14 +1189,9 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, int rs_open(struct tty_struct *tty, struct file * filp) { struct m68k_serial *info; - int retval, line; - - line = tty->index; - - if (line >= NR_PORTS || line < 0) /* we have exactly one */ - return -ENODEV; + int retval; - info = &m68k_soft[line]; + info = &m68k_soft[tty->index]; if (serial_paranoia_check(info, tty->name, "rs_open")) return -ENODEV; diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c index 9b7336fcfbb..5b149b466ec 100644 --- a/drivers/tty/serial/8250/8250.c +++ b/drivers/tty/serial/8250/8250.c @@ -38,16 +38,15 @@ #include <linux/nmi.h> #include <linux/mutex.h> #include <linux/slab.h> +#ifdef CONFIG_SPARC +#include <linux/sunserialcore.h> +#endif #include <asm/io.h> #include <asm/irq.h> #include "8250.h" -#ifdef CONFIG_SPARC -#include "../suncore.h" -#endif - /* * Configuration: * share_irqs - whether we pass IRQF_SHARED to request_irq(). This option @@ -86,13 +85,6 @@ static unsigned int skip_txen_test; /* force skip of txen test at init time */ #define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) -/* - * We default to IRQ0 for the "no irq" hack. Some - * machine types want others as well - they're free - * to redefine this in their header file. - */ -#define is_real_interrupt(irq) ((irq) != 0) - #ifdef CONFIG_SERIAL_8250_DETECT_IRQ #define CONFIG_SERIAL_DETECT_IRQ 1 #endif @@ -475,9 +467,8 @@ static void set_io_from_upio(struct uart_port *p) } static void -serial_out_sync(struct uart_8250_port *up, int offset, int value) +serial_port_out_sync(struct uart_port *p, int offset, int value) { - struct uart_port *p = &up->port; switch (p->iotype) { case UPIO_MEM: case UPIO_MEM32: @@ -490,30 +481,17 @@ serial_out_sync(struct uart_8250_port *up, int offset, int value) } } -#define serial_in(up, offset) \ - (up->port.serial_in(&(up)->port, (offset))) -#define serial_out(up, offset, value) \ - (up->port.serial_out(&(up)->port, (offset), (value))) -/* - * We used to support using pause I/O for certain machines. We - * haven't supported this for a while, but just in case it's badly - * needed for certain old 386 machines, I've left these #define's - * in.... - */ -#define serial_inp(up, offset) serial_in(up, offset) -#define serial_outp(up, offset, value) serial_out(up, offset, value) - /* Uart divisor latch read */ static inline int _serial_dl_read(struct uart_8250_port *up) { - return serial_inp(up, UART_DLL) | serial_inp(up, UART_DLM) << 8; + return serial_in(up, UART_DLL) | serial_in(up, UART_DLM) << 8; } /* Uart divisor latch write */ static inline void _serial_dl_write(struct uart_8250_port *up, int value) { - serial_outp(up, UART_DLL, value & 0xff); - serial_outp(up, UART_DLM, value >> 8 & 0xff); + serial_out(up, UART_DLL, value & 0xff); + serial_out(up, UART_DLM, value >> 8 & 0xff); } #if defined(CONFIG_MIPS_ALCHEMY) @@ -583,10 +561,10 @@ static unsigned int serial_icr_read(struct uart_8250_port *up, int offset) static void serial8250_clear_fifos(struct uart_8250_port *p) { if (p->capabilities & UART_CAP_FIFO) { - serial_outp(p, UART_FCR, UART_FCR_ENABLE_FIFO); - serial_outp(p, UART_FCR, UART_FCR_ENABLE_FIFO | + serial_out(p, UART_FCR, UART_FCR_ENABLE_FIFO); + serial_out(p, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); - serial_outp(p, UART_FCR, 0); + serial_out(p, UART_FCR, 0); } } @@ -599,15 +577,15 @@ static void serial8250_set_sleep(struct uart_8250_port *p, int sleep) { if (p->capabilities & UART_CAP_SLEEP) { if (p->capabilities & UART_CAP_EFR) { - serial_outp(p, UART_LCR, UART_LCR_CONF_MODE_B); - serial_outp(p, UART_EFR, UART_EFR_ECB); - serial_outp(p, UART_LCR, 0); + serial_out(p, UART_LCR, UART_LCR_CONF_MODE_B); + serial_out(p, UART_EFR, UART_EFR_ECB); + serial_out(p, UART_LCR, 0); } - serial_outp(p, UART_IER, sleep ? UART_IERX_SLEEP : 0); + serial_out(p, UART_IER, sleep ? UART_IERX_SLEEP : 0); if (p->capabilities & UART_CAP_EFR) { - serial_outp(p, UART_LCR, UART_LCR_CONF_MODE_B); - serial_outp(p, UART_EFR, 0); - serial_outp(p, UART_LCR, 0); + serial_out(p, UART_LCR, UART_LCR_CONF_MODE_B); + serial_out(p, UART_EFR, 0); + serial_out(p, UART_LCR, 0); } } } @@ -622,12 +600,12 @@ static int __enable_rsa(struct uart_8250_port *up) unsigned char mode; int result; - mode = serial_inp(up, UART_RSA_MSR); + mode = serial_in(up, UART_RSA_MSR); result = mode & UART_RSA_MSR_FIFO; if (!result) { - serial_outp(up, UART_RSA_MSR, mode | UART_RSA_MSR_FIFO); - mode = serial_inp(up, UART_RSA_MSR); + serial_out(up, UART_RSA_MSR, mode | UART_RSA_MSR_FIFO); + mode = serial_in(up, UART_RSA_MSR); result = mode & UART_RSA_MSR_FIFO; } @@ -646,7 +624,7 @@ static void enable_rsa(struct uart_8250_port *up) spin_unlock_irq(&up->port.lock); } if (up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) - serial_outp(up, UART_RSA_FRR, 0); + serial_out(up, UART_RSA_FRR, 0); } } @@ -665,12 +643,12 @@ static void disable_rsa(struct uart_8250_port *up) up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) { spin_lock_irq(&up->port.lock); - mode = serial_inp(up, UART_RSA_MSR); + mode = serial_in(up, UART_RSA_MSR); result = !(mode & UART_RSA_MSR_FIFO); if (!result) { - serial_outp(up, UART_RSA_MSR, mode & ~UART_RSA_MSR_FIFO); - mode = serial_inp(up, UART_RSA_MSR); + serial_out(up, UART_RSA_MSR, mode & ~UART_RSA_MSR_FIFO); + mode = serial_in(up, UART_RSA_MSR); result = !(mode & UART_RSA_MSR_FIFO); } @@ -691,28 +669,28 @@ static int size_fifo(struct uart_8250_port *up) unsigned short old_dl; int count; - old_lcr = serial_inp(up, UART_LCR); - serial_outp(up, UART_LCR, 0); - old_fcr = serial_inp(up, UART_FCR); - old_mcr = serial_inp(up, UART_MCR); - serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | + old_lcr = serial_in(up, UART_LCR); + serial_out(up, UART_LCR, 0); + old_fcr = serial_in(up, UART_FCR); + old_mcr = serial_in(up, UART_MCR); + serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); - serial_outp(up, UART_MCR, UART_MCR_LOOP); - serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_A); + serial_out(up, UART_MCR, UART_MCR_LOOP); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); old_dl = serial_dl_read(up); serial_dl_write(up, 0x0001); - serial_outp(up, UART_LCR, 0x03); + serial_out(up, UART_LCR, 0x03); for (count = 0; count < 256; count++) - serial_outp(up, UART_TX, count); + serial_out(up, UART_TX, count); mdelay(20);/* FIXME - schedule_timeout */ - for (count = 0; (serial_inp(up, UART_LSR) & UART_LSR_DR) && + for (count = 0; (serial_in(up, UART_LSR) & UART_LSR_DR) && (count < 256); count++) - serial_inp(up, UART_RX); - serial_outp(up, UART_FCR, old_fcr); - serial_outp(up, UART_MCR, old_mcr); - serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_A); + serial_in(up, UART_RX); + serial_out(up, UART_FCR, old_fcr); + serial_out(up, UART_MCR, old_mcr); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); serial_dl_write(up, old_dl); - serial_outp(up, UART_LCR, old_lcr); + serial_out(up, UART_LCR, old_lcr); return count; } @@ -727,20 +705,20 @@ static unsigned int autoconfig_read_divisor_id(struct uart_8250_port *p) unsigned char old_dll, old_dlm, old_lcr; unsigned int id; - old_lcr = serial_inp(p, UART_LCR); - serial_outp(p, UART_LCR, UART_LCR_CONF_MODE_A); + old_lcr = serial_in(p, UART_LCR); + serial_out(p, UART_LCR, UART_LCR_CONF_MODE_A); - old_dll = serial_inp(p, UART_DLL); - old_dlm = serial_inp(p, UART_DLM); + old_dll = serial_in(p, UART_DLL); + old_dlm = serial_in(p, UART_DLM); - serial_outp(p, UART_DLL, 0); - serial_outp(p, UART_DLM, 0); + serial_out(p, UART_DLL, 0); + serial_out(p, UART_DLM, 0); - id = serial_inp(p, UART_DLL) | serial_inp(p, UART_DLM) << 8; + id = serial_in(p, UART_DLL) | serial_in(p, UART_DLM) << 8; - serial_outp(p, UART_DLL, old_dll); - serial_outp(p, UART_DLM, old_dlm); - serial_outp(p, UART_LCR, old_lcr); + serial_out(p, UART_DLL, old_dll); + serial_out(p, UART_DLM, old_dlm); + serial_out(p, UART_LCR, old_lcr); return id; } @@ -850,11 +828,11 @@ static void autoconfig_8250(struct uart_8250_port *up) up->port.type = PORT_8250; scratch = serial_in(up, UART_SCR); - serial_outp(up, UART_SCR, 0xa5); + serial_out(up, UART_SCR, 0xa5); status1 = serial_in(up, UART_SCR); - serial_outp(up, UART_SCR, 0x5a); + serial_out(up, UART_SCR, 0x5a); status2 = serial_in(up, UART_SCR); - serial_outp(up, UART_SCR, scratch); + serial_out(up, UART_SCR, scratch); if (status1 == 0xa5 && status2 == 0x5a) up->port.type = PORT_16450; @@ -885,7 +863,7 @@ static inline int ns16550a_goto_highspeed(struct uart_8250_port *up) } else { status &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */ status |= 0x10; /* 1.625 divisor for baud_base --> 921600 */ - serial_outp(up, 0x04, status); + serial_out(up, 0x04, status); } return 1; } @@ -908,9 +886,9 @@ static void autoconfig_16550a(struct uart_8250_port *up) * Check for presence of the EFR when DLAB is set. * Only ST16C650V1 UARTs pass this test. */ - serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_A); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); if (serial_in(up, UART_EFR) == 0) { - serial_outp(up, UART_EFR, 0xA8); + serial_out(up, UART_EFR, 0xA8); if (serial_in(up, UART_EFR) != 0) { DEBUG_AUTOCONF("EFRv1 "); up->port.type = PORT_16650; @@ -918,7 +896,7 @@ static void autoconfig_16550a(struct uart_8250_port *up) } else { DEBUG_AUTOCONF("Motorola 8xxx DUART "); } - serial_outp(up, UART_EFR, 0); + serial_out(up, UART_EFR, 0); return; } @@ -926,7 +904,7 @@ static void autoconfig_16550a(struct uart_8250_port *up) * Maybe it requires 0xbf to be written to the LCR. * (other ST16C650V2 UARTs, TI16C752A, etc) */ - serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); if (serial_in(up, UART_EFR) == 0 && !broken_efr(up)) { DEBUG_AUTOCONF("EFRv2 "); autoconfig_has_efr(up); @@ -940,23 +918,23 @@ static void autoconfig_16550a(struct uart_8250_port *up) * switch back to bank 2, read it from EXCR1 again and check * it's changed. If so, set baud_base in EXCR2 to 921600. -- dwmw2 */ - serial_outp(up, UART_LCR, 0); + serial_out(up, UART_LCR, 0); status1 = serial_in(up, UART_MCR); - serial_outp(up, UART_LCR, 0xE0); + serial_out(up, UART_LCR, 0xE0); status2 = serial_in(up, 0x02); /* EXCR1 */ if (!((status2 ^ status1) & UART_MCR_LOOP)) { - serial_outp(up, UART_LCR, 0); - serial_outp(up, UART_MCR, status1 ^ UART_MCR_LOOP); - serial_outp(up, UART_LCR, 0xE0); + serial_out(up, UART_LCR, 0); + serial_out(up, UART_MCR, status1 ^ UART_MCR_LOOP); + serial_out(up, UART_LCR, 0xE0); status2 = serial_in(up, 0x02); /* EXCR1 */ - serial_outp(up, UART_LCR, 0); - serial_outp(up, UART_MCR, status1); + serial_out(up, UART_LCR, 0); + serial_out(up, UART_MCR, status1); if ((status2 ^ status1) & UART_MCR_LOOP) { unsigned short quot; - serial_outp(up, UART_LCR, 0xE0); + serial_out(up, UART_LCR, 0xE0); quot = serial_dl_read(up); quot <<= 3; @@ -964,7 +942,7 @@ static void autoconfig_16550a(struct uart_8250_port *up) if (ns16550a_goto_highspeed(up)) serial_dl_write(up, quot); - serial_outp(up, UART_LCR, 0); + serial_out(up, UART_LCR, 0); up->port.uartclk = 921600*16; up->port.type = PORT_NS16550A; @@ -979,15 +957,15 @@ static void autoconfig_16550a(struct uart_8250_port *up) * Try setting it with and without DLAB set. Cheap clones * set bit 5 without DLAB set. */ - serial_outp(up, UART_LCR, 0); - serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE); + serial_out(up, UART_LCR, 0); + serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE); status1 = serial_in(up, UART_IIR) >> 5; - serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); - serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_A); - serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE); + serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); + serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE); status2 = serial_in(up, UART_IIR) >> 5; - serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); - serial_outp(up, UART_LCR, 0); + serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO); + serial_out(up, UART_LCR, 0); DEBUG_AUTOCONF("iir1=%d iir2=%d ", status1, status2); @@ -1006,13 +984,13 @@ static void autoconfig_16550a(struct uart_8250_port *up) * already a 1 and maybe locked there before we even start start. */ iersave = serial_in(up, UART_IER); - serial_outp(up, UART_IER, iersave & ~UART_IER_UUE); + serial_out(up, UART_IER, iersave & ~UART_IER_UUE); if (!(serial_in(up, UART_IER) & UART_IER_UUE)) { /* * OK it's in a known zero state, try writing and reading * without disturbing the current state of the other bits. */ - serial_outp(up, UART_IER, iersave | UART_IER_UUE); + serial_out(up, UART_IER, iersave | UART_IER_UUE); if (serial_in(up, UART_IER) & UART_IER_UUE) { /* * It's an Xscale. @@ -1030,7 +1008,7 @@ static void autoconfig_16550a(struct uart_8250_port *up) */ DEBUG_AUTOCONF("Couldn't force IER_UUE to 0 "); } - serial_outp(up, UART_IER, iersave); + serial_out(up, UART_IER, iersave); /* * Exar uarts have EFR in a weird location @@ -1061,24 +1039,25 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags) { unsigned char status1, scratch, scratch2, scratch3; unsigned char save_lcr, save_mcr; + struct uart_port *port = &up->port; unsigned long flags; - if (!up->port.iobase && !up->port.mapbase && !up->port.membase) + if (!port->iobase && !port->mapbase && !port->membase) return; DEBUG_AUTOCONF("ttyS%d: autoconf (0x%04lx, 0x%p): ", - serial_index(&up->port), up->port.iobase, up->port.membase); + serial_index(port), port->iobase, port->membase); /* * We really do need global IRQs disabled here - we're going to * be frobbing the chips IRQ enable register to see if it exists. */ - spin_lock_irqsave(&up->port.lock, flags); + spin_lock_irqsave(&port->lock, flags); up->capabilities = 0; up->bugs = 0; - if (!(up->port.flags & UPF_BUGGY_UART)) { + if (!(port->flags & UPF_BUGGY_UART)) { /* * Do a simple existence test first; if we fail this, * there's no point trying anything else. @@ -1092,8 +1071,8 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags) * Note: this is safe as long as MCR bit 4 is clear * and the device is in "PC" mode. */ - scratch = serial_inp(up, UART_IER); - serial_outp(up, UART_IER, 0); + scratch = serial_in(up, UART_IER); + serial_out(up, UART_IER, 0); #ifdef __i386__ outb(0xff, 0x080); #endif @@ -1101,13 +1080,13 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags) * Mask out IER[7:4] bits for test as some UARTs (e.g. TL * 16C754B) allow only to modify them if an EFR bit is set. */ - scratch2 = serial_inp(up, UART_IER) & 0x0f; - serial_outp(up, UART_IER, 0x0F); + scratch2 = serial_in(up, UART_IER) & 0x0f; + serial_out(up, UART_IER, 0x0F); #ifdef __i386__ outb(0, 0x080); #endif - scratch3 = serial_inp(up, UART_IER) & 0x0f; - serial_outp(up, UART_IER, scratch); + scratch3 = serial_in(up, UART_IER) & 0x0f; + serial_out(up, UART_IER, scratch); if (scratch2 != 0 || scratch3 != 0x0F) { /* * We failed; there's nothing here @@ -1130,10 +1109,10 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags) * manufacturer would be stupid enough to design a board * that conflicts with COM 1-4 --- we hope! */ - if (!(up->port.flags & UPF_SKIP_TEST)) { - serial_outp(up, UART_MCR, UART_MCR_LOOP | 0x0A); - status1 = serial_inp(up, UART_MSR) & 0xF0; - serial_outp(up, UART_MCR, save_mcr); + if (!(port->flags & UPF_SKIP_TEST)) { + serial_out(up, UART_MCR, UART_MCR_LOOP | 0x0A); + status1 = serial_in(up, UART_MSR) & 0xF0; + serial_out(up, UART_MCR, save_mcr); if (status1 != 0x90) { DEBUG_AUTOCONF("LOOP test failed (%02x) ", status1); @@ -1150,11 +1129,11 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags) * We also initialise the EFR (if any) to zero for later. The * EFR occupies the same register location as the FCR and IIR. */ - serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B); - serial_outp(up, UART_EFR, 0); - serial_outp(up, UART_LCR, 0); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + serial_out(up, UART_EFR, 0); + serial_out(up, UART_LCR, 0); - serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); + serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO); scratch = serial_in(up, UART_IIR) >> 6; DEBUG_AUTOCONF("iir=%d ", scratch); @@ -1164,10 +1143,10 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags) autoconfig_8250(up); break; case 1: - up->port.type = PORT_UNKNOWN; + port->type = PORT_UNKNOWN; break; case 2: - up->port.type = PORT_16550; + port->type = PORT_16550; break; case 3: autoconfig_16550a(up); @@ -1178,102 +1157,102 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags) /* * Only probe for RSA ports if we got the region. */ - if (up->port.type == PORT_16550A && probeflags & PROBE_RSA) { + if (port->type == PORT_16550A && probeflags & PROBE_RSA) { int i; for (i = 0 ; i < probe_rsa_count; ++i) { - if (probe_rsa[i] == up->port.iobase && - __enable_rsa(up)) { - up->port.type = PORT_RSA; + if (probe_rsa[i] == port->iobase && __enable_rsa(up)) { + port->type = PORT_RSA; break; } } } #endif - serial_outp(up, UART_LCR, save_lcr); + serial_out(up, UART_LCR, save_lcr); - if (up->capabilities != uart_config[up->port.type].flags) { + if (up->capabilities != uart_config[port->type].flags) { printk(KERN_WARNING "ttyS%d: detected caps %08x should be %08x\n", - serial_index(&up->port), up->capabilities, - uart_config[up->port.type].flags); + serial_index(port), up->capabilities, + uart_config[port->type].flags); } - up->port.fifosize = uart_config[up->port.type].fifo_size; - up->capabilities = uart_config[up->port.type].flags; - up->tx_loadsz = uart_config[up->port.type].tx_loadsz; + port->fifosize = uart_config[up->port.type].fifo_size; + up->capabilities = uart_config[port->type].flags; + up->tx_loadsz = uart_config[port->type].tx_loadsz; - if (up->port.type == PORT_UNKNOWN) + if (port->type == PORT_UNKNOWN) goto out; /* * Reset the UART. */ #ifdef CONFIG_SERIAL_8250_RSA - if (up->port.type == PORT_RSA) - serial_outp(up, UART_RSA_FRR, 0); + if (port->type == PORT_RSA) + serial_out(up, UART_RSA_FRR, 0); #endif - serial_outp(up, UART_MCR, save_mcr); + serial_out(up, UART_MCR, save_mcr); serial8250_clear_fifos(up); serial_in(up, UART_RX); if (up->capabilities & UART_CAP_UUE) - serial_outp(up, UART_IER, UART_IER_UUE); + serial_out(up, UART_IER, UART_IER_UUE); else - serial_outp(up, UART_IER, 0); + serial_out(up, UART_IER, 0); out: - spin_unlock_irqrestore(&up->port.lock, flags); - DEBUG_AUTOCONF("type=%s\n", uart_config[up->port.type].name); + spin_unlock_irqrestore(&port->lock, flags); + DEBUG_AUTOCONF("type=%s\n", uart_config[port->type].name); } static void autoconfig_irq(struct uart_8250_port *up) { + struct uart_port *port = &up->port; unsigned char save_mcr, save_ier; unsigned char save_ICP = 0; unsigned int ICP = 0; unsigned long irqs; int irq; - if (up->port.flags & UPF_FOURPORT) { - ICP = (up->port.iobase & 0xfe0) | 0x1f; + if (port->flags & UPF_FOURPORT) { + ICP = (port->iobase & 0xfe0) | 0x1f; save_ICP = inb_p(ICP); outb_p(0x80, ICP); - (void) inb_p(ICP); + inb_p(ICP); } /* forget possible initially masked and pending IRQ */ probe_irq_off(probe_irq_on()); - save_mcr = serial_inp(up, UART_MCR); - save_ier = serial_inp(up, UART_IER); - serial_outp(up, UART_MCR, UART_MCR_OUT1 | UART_MCR_OUT2); + save_mcr = serial_in(up, UART_MCR); + save_ier = serial_in(up, UART_IER); + serial_out(up, UART_MCR, UART_MCR_OUT1 | UART_MCR_OUT2); irqs = probe_irq_on(); - serial_outp(up, UART_MCR, 0); + serial_out(up, UART_MCR, 0); udelay(10); - if (up->port.flags & UPF_FOURPORT) { - serial_outp(up, UART_MCR, + if (port->flags & UPF_FOURPORT) { + serial_out(up, UART_MCR, UART_MCR_DTR | UART_MCR_RTS); } else { - serial_outp(up, UART_MCR, + serial_out(up, UART_MCR, UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2); } - serial_outp(up, UART_IER, 0x0f); /* enable all intrs */ - (void)serial_inp(up, UART_LSR); - (void)serial_inp(up, UART_RX); - (void)serial_inp(up, UART_IIR); - (void)serial_inp(up, UART_MSR); - serial_outp(up, UART_TX, 0xFF); + serial_out(up, UART_IER, 0x0f); /* enable all intrs */ + serial_in(up, UART_LSR); + serial_in(up, UART_RX); + serial_in(up, UART_IIR); + serial_in(up, UART_MSR); + serial_out(up, UART_TX, 0xFF); udelay(20); irq = probe_irq_off(irqs); - serial_outp(up, UART_MCR, save_mcr); - serial_outp(up, UART_IER, save_ier); + serial_out(up, UART_MCR, save_mcr); + serial_out(up, UART_IER, save_ier); - if (up->port.flags & UPF_FOURPORT) + if (port->flags & UPF_FOURPORT) outb_p(save_ICP, ICP); - up->port.irq = (irq > 0) ? irq : 0; + port->irq = (irq > 0) ? irq : 0; } static inline void __stop_tx(struct uart_8250_port *p) @@ -1294,7 +1273,7 @@ static void serial8250_stop_tx(struct uart_port *port) /* * We really want to stop the transmitter from sending. */ - if (up->port.type == PORT_16C950) { + if (port->type == PORT_16C950) { up->acr |= UART_ACR_TXDIS; serial_icr_write(up, UART_ACR, up->acr); } @@ -1307,13 +1286,13 @@ static void serial8250_start_tx(struct uart_port *port) if (!(up->ier & UART_IER_THRI)) { up->ier |= UART_IER_THRI; - serial_out(up, UART_IER, up->ier); + serial_port_out(port, UART_IER, up->ier); if (up->bugs & UART_BUG_TXEN) { unsigned char lsr; lsr = serial_in(up, UART_LSR); up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS; - if ((up->port.type == PORT_RM9000) ? + if ((port->type == PORT_RM9000) ? (lsr & UART_LSR_THRE) : (lsr & UART_LSR_TEMT)) serial8250_tx_chars(up); @@ -1323,7 +1302,7 @@ static void serial8250_start_tx(struct uart_port *port) /* * Re-enable the transmitter if we disabled it. */ - if (up->port.type == PORT_16C950 && up->acr & UART_ACR_TXDIS) { + if (port->type == PORT_16C950 && up->acr & UART_ACR_TXDIS) { up->acr &= ~UART_ACR_TXDIS; serial_icr_write(up, UART_ACR, up->acr); } @@ -1336,7 +1315,7 @@ static void serial8250_stop_rx(struct uart_port *port) up->ier &= ~UART_IER_RLSI; up->port.read_status_mask &= ~UART_LSR_DR; - serial_out(up, UART_IER, up->ier); + serial_port_out(port, UART_IER, up->ier); } static void serial8250_enable_ms(struct uart_port *port) @@ -1349,7 +1328,7 @@ static void serial8250_enable_ms(struct uart_port *port) return; up->ier |= UART_IER_MSI; - serial_out(up, UART_IER, up->ier); + serial_port_out(port, UART_IER, up->ier); } /* @@ -1381,14 +1360,15 @@ static void clear_rx_fifo(struct uart_8250_port *up) unsigned char serial8250_rx_chars(struct uart_8250_port *up, unsigned char lsr) { - struct tty_struct *tty = up->port.state->port.tty; + struct uart_port *port = &up->port; + struct tty_struct *tty = port->state->port.tty; unsigned char ch; int max_count = 256; char flag; do { if (likely(lsr & UART_LSR_DR)) - ch = serial_inp(up, UART_RX); + ch = serial_in(up, UART_RX); else /* * Intel 82571 has a Serial Over Lan device that will @@ -1400,7 +1380,7 @@ serial8250_rx_chars(struct uart_8250_port *up, unsigned char lsr) ch = 0; flag = TTY_NORMAL; - up->port.icount.rx++; + port->icount.rx++; lsr |= up->lsr_saved_flags; up->lsr_saved_flags = 0; @@ -1411,12 +1391,12 @@ serial8250_rx_chars(struct uart_8250_port *up, unsigned char lsr) */ if (lsr & UART_LSR_BI) { lsr &= ~(UART_LSR_FE | UART_LSR_PE); - up->port.icount.brk++; + port->icount.brk++; /* * If tegra port then clear the rx fifo to * accept another break/character. */ - if (up->port.type == PORT_TEGRA) + if (port->type == PORT_TEGRA) clear_rx_fifo(up); /* @@ -1425,19 +1405,19 @@ serial8250_rx_chars(struct uart_8250_port *up, unsigned char lsr) * may get masked by ignore_status_mask * or read_status_mask. */ - if (uart_handle_break(&up->port)) + if (uart_handle_break(port)) goto ignore_char; } else if (lsr & UART_LSR_PE) - up->port.icount.parity++; + port->icount.parity++; else if (lsr & UART_LSR_FE) - up->port.icount.frame++; + port->icount.frame++; if (lsr & UART_LSR_OE) - up->port.icount.overrun++; + port->icount.overrun++; /* * Mask off conditions which should be ignored. */ - lsr &= up->port.read_status_mask; + lsr &= port->read_status_mask; if (lsr & UART_LSR_BI) { DEBUG_INTR("handling break...."); @@ -1447,34 +1427,35 @@ serial8250_rx_chars(struct uart_8250_port *up, unsigned char lsr) else if (lsr & UART_LSR_FE) flag = TTY_FRAME; } - if (uart_handle_sysrq_char(&up->port, ch)) + if (uart_handle_sysrq_char(port, ch)) goto ignore_char; - uart_insert_char(&up->port, lsr, UART_LSR_OE, ch, flag); + uart_insert_char(port, lsr, UART_LSR_OE, ch, flag); ignore_char: - lsr = serial_inp(up, UART_LSR); + lsr = serial_in(up, UART_LSR); } while ((lsr & (UART_LSR_DR | UART_LSR_BI)) && (max_count-- > 0)); - spin_unlock(&up->port.lock); + spin_unlock(&port->lock); tty_flip_buffer_push(tty); - spin_lock(&up->port.lock); + spin_lock(&port->lock); return lsr; } EXPORT_SYMBOL_GPL(serial8250_rx_chars); void serial8250_tx_chars(struct uart_8250_port *up) { - struct circ_buf *xmit = &up->port.state->xmit; + struct uart_port *port = &up->port; + struct circ_buf *xmit = &port->state->xmit; int count; - if (up->port.x_char) { - serial_outp(up, UART_TX, up->port.x_char); - up->port.icount.tx++; - up->port.x_char = 0; + if (port->x_char) { + serial_out(up, UART_TX, port->x_char); + port->icount.tx++; + port->x_char = 0; return; } - if (uart_tx_stopped(&up->port)) { - serial8250_stop_tx(&up->port); + if (uart_tx_stopped(port)) { + serial8250_stop_tx(port); return; } if (uart_circ_empty(xmit)) { @@ -1486,13 +1467,13 @@ void serial8250_tx_chars(struct uart_8250_port *up) do { serial_out(up, UART_TX, xmit->buf[xmit->tail]); xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - up->port.icount.tx++; + port->icount.tx++; if (uart_circ_empty(xmit)) break; } while (--count > 0); if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&up->port); + uart_write_wakeup(port); DEBUG_INTR("THRE..."); @@ -1503,22 +1484,23 @@ EXPORT_SYMBOL_GPL(serial8250_tx_chars); unsigned int serial8250_modem_status(struct uart_8250_port *up) { + struct uart_port *port = &up->port; unsigned int status = serial_in(up, UART_MSR); status |= up->msr_saved_flags; up->msr_saved_flags = 0; if (status & UART_MSR_ANY_DELTA && up->ier & UART_IER_MSI && - up->port.state != NULL) { + port->state != NULL) { if (status & UART_MSR_TERI) - up->port.icount.rng++; + port->icount.rng++; if (status & UART_MSR_DDSR) - up->port.icount.dsr++; + port->icount.dsr++; if (status & UART_MSR_DDCD) - uart_handle_dcd_change(&up->port, status & UART_MSR_DCD); + uart_handle_dcd_change(port, status & UART_MSR_DCD); if (status & UART_MSR_DCTS) - uart_handle_cts_change(&up->port, status & UART_MSR_CTS); + uart_handle_cts_change(port, status & UART_MSR_CTS); - wake_up_interruptible(&up->port.state->port.delta_msr_wait); + wake_up_interruptible(&port->state->port.delta_msr_wait); } return status; @@ -1538,9 +1520,9 @@ int serial8250_handle_irq(struct uart_port *port, unsigned int iir) if (iir & UART_IIR_NO_INT) return 0; - spin_lock_irqsave(&up->port.lock, flags); + spin_lock_irqsave(&port->lock, flags); - status = serial_inp(up, UART_LSR); + status = serial_port_in(port, UART_LSR); DEBUG_INTR("status = %x...", status); @@ -1550,16 +1532,14 @@ int serial8250_handle_irq(struct uart_port *port, unsigned int iir) if (status & UART_LSR_THRE) serial8250_tx_chars(up); - spin_unlock_irqrestore(&up->port.lock, flags); + spin_unlock_irqrestore(&port->lock, flags); return 1; } EXPORT_SYMBOL_GPL(serial8250_handle_irq); static int serial8250_default_handle_irq(struct uart_port *port) { - struct uart_8250_port *up = - container_of(port, struct uart_8250_port, port); - unsigned int iir = serial_in(up, UART_IIR); + unsigned int iir = serial_port_in(port, UART_IIR); return serial8250_handle_irq(port, iir); } @@ -1750,7 +1730,7 @@ static void serial8250_backup_timeout(unsigned long data) * Must disable interrupts or else we risk racing with the interrupt * based handler. */ - if (is_real_interrupt(up->port.irq)) { + if (up->port.irq) { ier = serial_in(up, UART_IER); serial_out(up, UART_IER, 0); } @@ -1775,7 +1755,7 @@ static void serial8250_backup_timeout(unsigned long data) if (!(iir & UART_IIR_NO_INT)) serial8250_tx_chars(up); - if (is_real_interrupt(up->port.irq)) + if (up->port.irq) serial_out(up, UART_IER, ier); spin_unlock_irqrestore(&up->port.lock, flags); @@ -1792,10 +1772,10 @@ static unsigned int serial8250_tx_empty(struct uart_port *port) unsigned long flags; unsigned int lsr; - spin_lock_irqsave(&up->port.lock, flags); - lsr = serial_in(up, UART_LSR); + spin_lock_irqsave(&port->lock, flags); + lsr = serial_port_in(port, UART_LSR); up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS; - spin_unlock_irqrestore(&up->port.lock, flags); + spin_unlock_irqrestore(&port->lock, flags); return (lsr & BOTH_EMPTY) == BOTH_EMPTY ? TIOCSER_TEMT : 0; } @@ -1840,7 +1820,7 @@ static void serial8250_set_mctrl(struct uart_port *port, unsigned int mctrl) mcr = (mcr & up->mcr_mask) | up->mcr_force | up->mcr; - serial_out(up, UART_MCR, mcr); + serial_port_out(port, UART_MCR, mcr); } static void serial8250_break_ctl(struct uart_port *port, int break_state) @@ -1849,13 +1829,13 @@ static void serial8250_break_ctl(struct uart_port *port, int break_state) container_of(port, struct uart_8250_port, port); unsigned long flags; - spin_lock_irqsave(&up->port.lock, flags); + spin_lock_irqsave(&port->lock, flags); if (break_state == -1) up->lcr |= UART_LCR_SBC; else up->lcr &= ~UART_LCR_SBC; - serial_out(up, UART_LCR, up->lcr); - spin_unlock_irqrestore(&up->port.lock, flags); + serial_port_out(port, UART_LCR, up->lcr); + spin_unlock_irqrestore(&port->lock, flags); } /* @@ -1900,14 +1880,12 @@ static void wait_for_xmitr(struct uart_8250_port *up, int bits) static int serial8250_get_poll_char(struct uart_port *port) { - struct uart_8250_port *up = - container_of(port, struct uart_8250_port, port); - unsigned char lsr = serial_inp(up, UART_LSR); + unsigned char lsr = serial_port_in(port, UART_LSR); if (!(lsr & UART_LSR_DR)) return NO_POLL_CHAR; - return serial_inp(up, UART_RX); + return serial_port_in(port, UART_RX); } @@ -1921,21 +1899,21 @@ static void serial8250_put_poll_char(struct uart_port *port, /* * First save the IER then disable the interrupts */ - ier = serial_in(up, UART_IER); + ier = serial_port_in(port, UART_IER); if (up->capabilities & UART_CAP_UUE) - serial_out(up, UART_IER, UART_IER_UUE); + serial_port_out(port, UART_IER, UART_IER_UUE); else - serial_out(up, UART_IER, 0); + serial_port_out(port, UART_IER, 0); wait_for_xmitr(up, BOTH_EMPTY); /* * Send the character out. * If a LF, also do CR... */ - serial_out(up, UART_TX, c); + serial_port_out(port, UART_TX, c); if (c == 10) { wait_for_xmitr(up, BOTH_EMPTY); - serial_out(up, UART_TX, 13); + serial_port_out(port, UART_TX, 13); } /* @@ -1943,7 +1921,7 @@ static void serial8250_put_poll_char(struct uart_port *port, * and restore the IER */ wait_for_xmitr(up, BOTH_EMPTY); - serial_out(up, UART_IER, ier); + serial_port_out(port, UART_IER, ier); } #endif /* CONFIG_CONSOLE_POLL */ @@ -1956,25 +1934,25 @@ static int serial8250_startup(struct uart_port *port) unsigned char lsr, iir; int retval; - up->port.fifosize = uart_config[up->port.type].fifo_size; + port->fifosize = uart_config[up->port.type].fifo_size; up->tx_loadsz = uart_config[up->port.type].tx_loadsz; up->capabilities = uart_config[up->port.type].flags; up->mcr = 0; - if (up->port.iotype != up->cur_iotype) + if (port->iotype != up->cur_iotype) set_io_from_upio(port); - if (up->port.type == PORT_16C950) { + if (port->type == PORT_16C950) { /* Wake up and initialize UART */ up->acr = 0; - serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B); - serial_outp(up, UART_EFR, UART_EFR_ECB); - serial_outp(up, UART_IER, 0); - serial_outp(up, UART_LCR, 0); + serial_port_out(port, UART_LCR, UART_LCR_CONF_MODE_B); + serial_port_out(port, UART_EFR, UART_EFR_ECB); + serial_port_out(port, UART_IER, 0); + serial_port_out(port, UART_LCR, 0); serial_icr_write(up, UART_CSR, 0); /* Reset the UART */ - serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B); - serial_outp(up, UART_EFR, UART_EFR_ECB); - serial_outp(up, UART_LCR, 0); + serial_port_out(port, UART_LCR, UART_LCR_CONF_MODE_B); + serial_port_out(port, UART_EFR, UART_EFR_ECB); + serial_port_out(port, UART_LCR, 0); } #ifdef CONFIG_SERIAL_8250_RSA @@ -1994,41 +1972,43 @@ static int serial8250_startup(struct uart_port *port) /* * Clear the interrupt registers. */ - (void) serial_inp(up, UART_LSR); - (void) serial_inp(up, UART_RX); - (void) serial_inp(up, UART_IIR); - (void) serial_inp(up, UART_MSR); + serial_port_in(port, UART_LSR); + serial_port_in(port, UART_RX); + serial_port_in(port, UART_IIR); + serial_port_in(port, UART_MSR); /* * At this point, there's no way the LSR could still be 0xff; * if it is, then bail out, because there's likely no UART * here. */ - if (!(up->port.flags & UPF_BUGGY_UART) && - (serial_inp(up, UART_LSR) == 0xff)) { + if (!(port->flags & UPF_BUGGY_UART) && + (serial_port_in(port, UART_LSR) == 0xff)) { printk_ratelimited(KERN_INFO "ttyS%d: LSR safety check engaged!\n", - serial_index(&up->port)); + serial_index(port)); return -ENODEV; } /* * For a XR16C850, we need to set the trigger levels */ - if (up->port.type == PORT_16850) { + if (port->type == PORT_16850) { unsigned char fctr; - serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); - fctr = serial_inp(up, UART_FCTR) & ~(UART_FCTR_RX|UART_FCTR_TX); - serial_outp(up, UART_FCTR, fctr | UART_FCTR_TRGD | UART_FCTR_RX); - serial_outp(up, UART_TRG, UART_TRG_96); - serial_outp(up, UART_FCTR, fctr | UART_FCTR_TRGD | UART_FCTR_TX); - serial_outp(up, UART_TRG, UART_TRG_96); + fctr = serial_in(up, UART_FCTR) & ~(UART_FCTR_RX|UART_FCTR_TX); + serial_port_out(port, UART_FCTR, + fctr | UART_FCTR_TRGD | UART_FCTR_RX); + serial_port_out(port, UART_TRG, UART_TRG_96); + serial_port_out(port, UART_FCTR, + fctr | UART_FCTR_TRGD | UART_FCTR_TX); + serial_port_out(port, UART_TRG, UART_TRG_96); - serial_outp(up, UART_LCR, 0); + serial_port_out(port, UART_LCR, 0); } - if (is_real_interrupt(up->port.irq)) { + if (port->irq) { unsigned char iir1; /* * Test for UARTs that do not reassert THRE when the @@ -2038,23 +2018,23 @@ static int serial8250_startup(struct uart_port *port) * the interrupt is enabled. Delays are necessary to * allow register changes to become visible. */ - spin_lock_irqsave(&up->port.lock, flags); + spin_lock_irqsave(&port->lock, flags); if (up->port.irqflags & IRQF_SHARED) - disable_irq_nosync(up->port.irq); + disable_irq_nosync(port->irq); wait_for_xmitr(up, UART_LSR_THRE); - serial_out_sync(up, UART_IER, UART_IER_THRI); + serial_port_out_sync(port, UART_IER, UART_IER_THRI); udelay(1); /* allow THRE to set */ - iir1 = serial_in(up, UART_IIR); - serial_out(up, UART_IER, 0); - serial_out_sync(up, UART_IER, UART_IER_THRI); + iir1 = serial_port_in(port, UART_IIR); + serial_port_out(port, UART_IER, 0); + serial_port_out_sync(port, UART_IER, UART_IER_THRI); udelay(1); /* allow a working UART time to re-assert THRE */ - iir = serial_in(up, UART_IIR); - serial_out(up, UART_IER, 0); + iir = serial_port_in(port, UART_IIR); + serial_port_out(port, UART_IER, 0); - if (up->port.irqflags & IRQF_SHARED) - enable_irq(up->port.irq); - spin_unlock_irqrestore(&up->port.lock, flags); + if (port->irqflags & IRQF_SHARED) + enable_irq(port->irq); + spin_unlock_irqrestore(&port->lock, flags); /* * If the interrupt is not reasserted, setup a timer to @@ -2083,7 +2063,7 @@ static int serial8250_startup(struct uart_port *port) * hardware interrupt, we use a timer-based system. The original * driver used to do this with IRQ0. */ - if (!is_real_interrupt(up->port.irq)) { + if (!port->irq) { up->timer.data = (unsigned long)up; mod_timer(&up->timer, jiffies + uart_poll_timeout(port)); } else { @@ -2095,20 +2075,20 @@ static int serial8250_startup(struct uart_port *port) /* * Now, initialize the UART */ - serial_outp(up, UART_LCR, UART_LCR_WLEN8); + serial_port_out(port, UART_LCR, UART_LCR_WLEN8); - spin_lock_irqsave(&up->port.lock, flags); + spin_lock_irqsave(&port->lock, flags); if (up->port.flags & UPF_FOURPORT) { - if (!is_real_interrupt(up->port.irq)) + if (!up->port.irq) up->port.mctrl |= TIOCM_OUT1; } else /* * Most PC uarts need OUT2 raised to enable interrupts. */ - if (is_real_interrupt(up->port.irq)) + if (port->irq) up->port.mctrl |= TIOCM_OUT2; - serial8250_set_mctrl(&up->port, up->port.mctrl); + serial8250_set_mctrl(port, port->mctrl); /* Serial over Lan (SoL) hack: Intel 8257x Gigabit ethernet chips have a @@ -2128,10 +2108,10 @@ static int serial8250_startup(struct uart_port *port) * Do a quick test to see if we receive an * interrupt when we enable the TX irq. */ - serial_outp(up, UART_IER, UART_IER_THRI); - lsr = serial_in(up, UART_LSR); - iir = serial_in(up, UART_IIR); - serial_outp(up, UART_IER, 0); + serial_port_out(port, UART_IER, UART_IER_THRI); + lsr = serial_port_in(port, UART_LSR); + iir = serial_port_in(port, UART_IIR); + serial_port_out(port, UART_IER, 0); if (lsr & UART_LSR_TEMT && iir & UART_IIR_NO_INT) { if (!(up->bugs & UART_BUG_TXEN)) { @@ -2144,17 +2124,17 @@ static int serial8250_startup(struct uart_port *port) } dont_test_tx_en: - spin_unlock_irqrestore(&up->port.lock, flags); + spin_unlock_irqrestore(&port->lock, flags); /* * Clear the interrupt registers again for luck, and clear the * saved flags to avoid getting false values from polling * routines or the previous session. */ - serial_inp(up, UART_LSR); - serial_inp(up, UART_RX); - serial_inp(up, UART_IIR); - serial_inp(up, UART_MSR); + serial_port_in(port, UART_LSR); + serial_port_in(port, UART_RX); + serial_port_in(port, UART_IIR); + serial_port_in(port, UART_MSR); up->lsr_saved_flags = 0; up->msr_saved_flags = 0; @@ -2164,16 +2144,16 @@ dont_test_tx_en: * anyway, so we don't enable them here. */ up->ier = UART_IER_RLSI | UART_IER_RDI; - serial_outp(up, UART_IER, up->ier); + serial_port_out(port, UART_IER, up->ier); - if (up->port.flags & UPF_FOURPORT) { + if (port->flags & UPF_FOURPORT) { unsigned int icp; /* * Enable interrupts on the AST Fourport board */ - icp = (up->port.iobase & 0xfe0) | 0x01f; + icp = (port->iobase & 0xfe0) | 0x01f; outb_p(0x80, icp); - (void) inb_p(icp); + inb_p(icp); } return 0; @@ -2189,23 +2169,24 @@ static void serial8250_shutdown(struct uart_port *port) * Disable interrupts from this port */ up->ier = 0; - serial_outp(up, UART_IER, 0); + serial_port_out(port, UART_IER, 0); - spin_lock_irqsave(&up->port.lock, flags); - if (up->port.flags & UPF_FOURPORT) { + spin_lock_irqsave(&port->lock, flags); + if (port->flags & UPF_FOURPORT) { /* reset interrupts on the AST Fourport board */ - inb((up->port.iobase & 0xfe0) | 0x1f); - up->port.mctrl |= TIOCM_OUT1; + inb((port->iobase & 0xfe0) | 0x1f); + port->mctrl |= TIOCM_OUT1; } else - up->port.mctrl &= ~TIOCM_OUT2; + port->mctrl &= ~TIOCM_OUT2; - serial8250_set_mctrl(&up->port, up->port.mctrl); - spin_unlock_irqrestore(&up->port.lock, flags); + serial8250_set_mctrl(port, port->mctrl); + spin_unlock_irqrestore(&port->lock, flags); /* * Disable break condition and FIFOs */ - serial_out(up, UART_LCR, serial_inp(up, UART_LCR) & ~UART_LCR_SBC); + serial_port_out(port, UART_LCR, + serial_port_in(port, UART_LCR) & ~UART_LCR_SBC); serial8250_clear_fifos(up); #ifdef CONFIG_SERIAL_8250_RSA @@ -2219,11 +2200,11 @@ static void serial8250_shutdown(struct uart_port *port) * Read data port to reset things, and then unlink from * the IRQ chain. */ - (void) serial_in(up, UART_RX); + serial_port_in(port, UART_RX); del_timer_sync(&up->timer); up->timer.function = serial8250_timeout; - if (is_real_interrupt(up->port.irq)) + if (port->irq) serial_unlink_irq_chain(up); } @@ -2298,11 +2279,11 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, if (up->bugs & UART_BUG_QUOT && (quot & 0xff) == 0) quot++; - if (up->capabilities & UART_CAP_FIFO && up->port.fifosize > 1) { + if (up->capabilities & UART_CAP_FIFO && port->fifosize > 1) { if (baud < 2400) fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1; else - fcr = uart_config[up->port.type].fcr; + fcr = uart_config[port->type].fcr; } /* @@ -2313,7 +2294,7 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, * have sufficient FIFO entries for the latency of the remote * UART to respond. IOW, at least 32 bytes of FIFO. */ - if (up->capabilities & UART_CAP_AFE && up->port.fifosize >= 32) { + if (up->capabilities & UART_CAP_AFE && port->fifosize >= 32) { up->mcr &= ~UART_MCR_AFE; if (termios->c_cflag & CRTSCTS) up->mcr |= UART_MCR_AFE; @@ -2323,40 +2304,40 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, * Ok, we're now changing the port state. Do it with * interrupts disabled. */ - spin_lock_irqsave(&up->port.lock, flags); + spin_lock_irqsave(&port->lock, flags); /* * Update the per-port timeout. */ uart_update_timeout(port, termios->c_cflag, baud); - up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; + port->read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; if (termios->c_iflag & INPCK) - up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE; + port->read_status_mask |= UART_LSR_FE | UART_LSR_PE; if (termios->c_iflag & (BRKINT | PARMRK)) - up->port.read_status_mask |= UART_LSR_BI; + port->read_status_mask |= UART_LSR_BI; /* * Characteres to ignore */ - up->port.ignore_status_mask = 0; + port->ignore_status_mask = 0; if (termios->c_iflag & IGNPAR) - up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; + port->ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; if (termios->c_iflag & IGNBRK) { - up->port.ignore_status_mask |= UART_LSR_BI; + port->ignore_status_mask |= UART_LSR_BI; /* * If we're ignoring parity and break indicators, * ignore overruns too (for real raw support). */ if (termios->c_iflag & IGNPAR) - up->port.ignore_status_mask |= UART_LSR_OE; + port->ignore_status_mask |= UART_LSR_OE; } /* * ignore all characters if CREAD is not set */ if ((termios->c_cflag & CREAD) == 0) - up->port.ignore_status_mask |= UART_LSR_DR; + port->ignore_status_mask |= UART_LSR_DR; /* * CTS flow control flag and modem status interrupts @@ -2370,7 +2351,7 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, if (up->capabilities & UART_CAP_RTOIE) up->ier |= UART_IER_RTOIE; - serial_out(up, UART_IER, up->ier); + serial_port_out(port, UART_IER, up->ier); if (up->capabilities & UART_CAP_EFR) { unsigned char efr = 0; @@ -2382,11 +2363,11 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, if (termios->c_cflag & CRTSCTS) efr |= UART_EFR_CTS; - serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B); - if (up->port.flags & UPF_EXAR_EFR) - serial_outp(up, UART_XR_EFR, efr); + serial_port_out(port, UART_LCR, UART_LCR_CONF_MODE_B); + if (port->flags & UPF_EXAR_EFR) + serial_port_out(port, UART_XR_EFR, efr); else - serial_outp(up, UART_EFR, efr); + serial_port_out(port, UART_EFR, efr); } #ifdef CONFIG_ARCH_OMAP @@ -2394,18 +2375,20 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, if (cpu_is_omap1510() && is_omap_port(up)) { if (baud == 115200) { quot = 1; - serial_out(up, UART_OMAP_OSC_12M_SEL, 1); + serial_port_out(port, UART_OMAP_OSC_12M_SEL, 1); } else - serial_out(up, UART_OMAP_OSC_12M_SEL, 0); + serial_port_out(port, UART_OMAP_OSC_12M_SEL, 0); } #endif - if (up->capabilities & UART_NATSEMI) { - /* Switch to bank 2 not bank 1, to avoid resetting EXCR2 */ - serial_outp(up, UART_LCR, 0xe0); - } else { - serial_outp(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */ - } + /* + * For NatSemi, switch to bank 2 not bank 1, to avoid resetting EXCR2, + * otherwise just set DLAB + */ + if (up->capabilities & UART_NATSEMI) + serial_port_out(port, UART_LCR, 0xe0); + else + serial_port_out(port, UART_LCR, cval | UART_LCR_DLAB); serial_dl_write(up, quot); @@ -2413,20 +2396,19 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, * LCR DLAB must be set to enable 64-byte FIFO mode. If the FCR * is written without DLAB set, this mode will be disabled. */ - if (up->port.type == PORT_16750) - serial_outp(up, UART_FCR, fcr); + if (port->type == PORT_16750) + serial_port_out(port, UART_FCR, fcr); - serial_outp(up, UART_LCR, cval); /* reset DLAB */ + serial_port_out(port, UART_LCR, cval); /* reset DLAB */ up->lcr = cval; /* Save LCR */ - if (up->port.type != PORT_16750) { - if (fcr & UART_FCR_ENABLE_FIFO) { - /* emulated UARTs (Lucent Venus 167x) need two steps */ - serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); - } - serial_outp(up, UART_FCR, fcr); /* set fcr */ - } - serial8250_set_mctrl(&up->port, up->port.mctrl); - spin_unlock_irqrestore(&up->port.lock, flags); + if (port->type != PORT_16750) { + /* emulated UARTs (Lucent Venus 167x) need two steps */ + if (fcr & UART_FCR_ENABLE_FIFO) + serial_port_out(port, UART_FCR, UART_FCR_ENABLE_FIFO); + serial_port_out(port, UART_FCR, fcr); /* set fcr */ + } + serial8250_set_mctrl(port, port->mctrl); + spin_unlock_irqrestore(&port->lock, flags); /* Don't rewrite B0 */ if (tty_termios_baud_rate(termios)) tty_termios_encode_baud_rate(termios, baud, baud); @@ -2491,26 +2473,26 @@ static unsigned int serial8250_port_size(struct uart_8250_port *pt) static int serial8250_request_std_resource(struct uart_8250_port *up) { unsigned int size = serial8250_port_size(up); + struct uart_port *port = &up->port; int ret = 0; - switch (up->port.iotype) { + switch (port->iotype) { case UPIO_AU: case UPIO_TSI: case UPIO_MEM32: case UPIO_MEM: - if (!up->port.mapbase) + if (!port->mapbase) break; - if (!request_mem_region(up->port.mapbase, size, "serial")) { + if (!request_mem_region(port->mapbase, size, "serial")) { ret = -EBUSY; break; } - if (up->port.flags & UPF_IOREMAP) { - up->port.membase = ioremap_nocache(up->port.mapbase, - size); - if (!up->port.membase) { - release_mem_region(up->port.mapbase, size); + if (port->flags & UPF_IOREMAP) { + port->membase = ioremap_nocache(port->mapbase, size); + if (!port->membase) { + release_mem_region(port->mapbase, size); ret = -ENOMEM; } } @@ -2518,7 +2500,7 @@ static int serial8250_request_std_resource(struct uart_8250_port *up) case UPIO_HUB6: case UPIO_PORT: - if (!request_region(up->port.iobase, size, "serial")) + if (!request_region(port->iobase, size, "serial")) ret = -EBUSY; break; } @@ -2528,26 +2510,27 @@ static int serial8250_request_std_resource(struct uart_8250_port *up) static void serial8250_release_std_resource(struct uart_8250_port *up) { unsigned int size = serial8250_port_size(up); + struct uart_port *port = &up->port; - switch (up->port.iotype) { + switch (port->iotype) { case UPIO_AU: case UPIO_TSI: case UPIO_MEM32: case UPIO_MEM: - if (!up->port.mapbase) + if (!port->mapbase) break; - if (up->port.flags & UPF_IOREMAP) { - iounmap(up->port.membase); - up->port.membase = NULL; + if (port->flags & UPF_IOREMAP) { + iounmap(port->membase); + port->membase = NULL; } - release_mem_region(up->port.mapbase, size); + release_mem_region(port->mapbase, size); break; case UPIO_HUB6: case UPIO_PORT: - release_region(up->port.iobase, size); + release_region(port->iobase, size); break; } } @@ -2556,12 +2539,13 @@ static int serial8250_request_rsa_resource(struct uart_8250_port *up) { unsigned long start = UART_RSA_BASE << up->port.regshift; unsigned int size = 8 << up->port.regshift; + struct uart_port *port = &up->port; int ret = -EINVAL; - switch (up->port.iotype) { + switch (port->iotype) { case UPIO_HUB6: case UPIO_PORT: - start += up->port.iobase; + start += port->iobase; if (request_region(start, size, "serial-rsa")) ret = 0; else @@ -2576,11 +2560,12 @@ static void serial8250_release_rsa_resource(struct uart_8250_port *up) { unsigned long offset = UART_RSA_BASE << up->port.regshift; unsigned int size = 8 << up->port.regshift; + struct uart_port *port = &up->port; - switch (up->port.iotype) { + switch (port->iotype) { case UPIO_HUB6: case UPIO_PORT: - release_region(up->port.iobase + offset, size); + release_region(port->iobase + offset, size); break; } } @@ -2591,7 +2576,7 @@ static void serial8250_release_port(struct uart_port *port) container_of(port, struct uart_8250_port, port); serial8250_release_std_resource(up); - if (up->port.type == PORT_RSA) + if (port->type == PORT_RSA) serial8250_release_rsa_resource(up); } @@ -2602,7 +2587,7 @@ static int serial8250_request_port(struct uart_port *port) int ret = 0; ret = serial8250_request_std_resource(up); - if (ret == 0 && up->port.type == PORT_RSA) { + if (ret == 0 && port->type == PORT_RSA) { ret = serial8250_request_rsa_resource(up); if (ret < 0) serial8250_release_std_resource(up); @@ -2630,22 +2615,22 @@ static void serial8250_config_port(struct uart_port *port, int flags) if (ret < 0) probeflags &= ~PROBE_RSA; - if (up->port.iotype != up->cur_iotype) + if (port->iotype != up->cur_iotype) set_io_from_upio(port); if (flags & UART_CONFIG_TYPE) autoconfig(up, probeflags); /* if access method is AU, it is a 16550 with a quirk */ - if (up->port.type == PORT_16550A && up->port.iotype == UPIO_AU) + if (port->type == PORT_16550A && port->iotype == UPIO_AU) up->bugs |= UART_BUG_NOMSR; - if (up->port.type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ) + if (port->type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ) autoconfig_irq(up); - if (up->port.type != PORT_RSA && probeflags & PROBE_RSA) + if (port->type != PORT_RSA && probeflags & PROBE_RSA) serial8250_release_rsa_resource(up); - if (up->port.type == PORT_UNKNOWN) + if (port->type == PORT_UNKNOWN) serial8250_release_std_resource(up); } @@ -2719,9 +2704,10 @@ static void __init serial8250_isa_init_ports(void) for (i = 0; i < nr_uarts; i++) { struct uart_8250_port *up = &serial8250_ports[i]; + struct uart_port *port = &up->port; - up->port.line = i; - spin_lock_init(&up->port.lock); + port->line = i; + spin_lock_init(&port->lock); init_timer(&up->timer); up->timer.function = serial8250_timeout; @@ -2732,7 +2718,7 @@ static void __init serial8250_isa_init_ports(void) up->mcr_mask = ~ALPHA_KLUDGE_MCR; up->mcr_force = ALPHA_KLUDGE_MCR; - up->port.ops = &serial8250_pops; + port->ops = &serial8250_pops; } if (share_irqs) @@ -2741,17 +2727,19 @@ static void __init serial8250_isa_init_ports(void) for (i = 0, up = serial8250_ports; i < ARRAY_SIZE(old_serial_port) && i < nr_uarts; i++, up++) { - up->port.iobase = old_serial_port[i].port; - up->port.irq = irq_canonicalize(old_serial_port[i].irq); - up->port.irqflags = old_serial_port[i].irqflags; - up->port.uartclk = old_serial_port[i].baud_base * 16; - up->port.flags = old_serial_port[i].flags; - up->port.hub6 = old_serial_port[i].hub6; - up->port.membase = old_serial_port[i].iomem_base; - up->port.iotype = old_serial_port[i].io_type; - up->port.regshift = old_serial_port[i].iomem_reg_shift; - set_io_from_upio(&up->port); - up->port.irqflags |= irqflag; + struct uart_port *port = &up->port; + + port->iobase = old_serial_port[i].port; + port->irq = irq_canonicalize(old_serial_port[i].irq); + port->irqflags = old_serial_port[i].irqflags; + port->uartclk = old_serial_port[i].baud_base * 16; + port->flags = old_serial_port[i].flags; + port->hub6 = old_serial_port[i].hub6; + port->membase = old_serial_port[i].iomem_base; + port->iotype = old_serial_port[i].io_type; + port->regshift = old_serial_port[i].iomem_reg_shift; + set_io_from_upio(port); + port->irqflags |= irqflag; if (serial8250_isa_config != NULL) serial8250_isa_config(i, &up->port, &up->capabilities); @@ -2799,7 +2787,7 @@ static void serial8250_console_putchar(struct uart_port *port, int ch) container_of(port, struct uart_8250_port, port); wait_for_xmitr(up, UART_LSR_THRE); - serial_out(up, UART_TX, ch); + serial_port_out(port, UART_TX, ch); } /* @@ -2812,6 +2800,7 @@ static void serial8250_console_write(struct console *co, const char *s, unsigned int count) { struct uart_8250_port *up = &serial8250_ports[co->index]; + struct uart_port *port = &up->port; unsigned long flags; unsigned int ier; int locked = 1; @@ -2819,32 +2808,32 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count) touch_nmi_watchdog(); local_irq_save(flags); - if (up->port.sysrq) { + if (port->sysrq) { /* serial8250_handle_irq() already took the lock */ locked = 0; } else if (oops_in_progress) { - locked = spin_trylock(&up->port.lock); + locked = spin_trylock(&port->lock); } else - spin_lock(&up->port.lock); + spin_lock(&port->lock); /* * First save the IER then disable the interrupts */ - ier = serial_in(up, UART_IER); + ier = serial_port_in(port, UART_IER); if (up->capabilities & UART_CAP_UUE) - serial_out(up, UART_IER, UART_IER_UUE); + serial_port_out(port, UART_IER, UART_IER_UUE); else - serial_out(up, UART_IER, 0); + serial_port_out(port, UART_IER, 0); - uart_console_write(&up->port, s, count, serial8250_console_putchar); + uart_console_write(port, s, count, serial8250_console_putchar); /* * Finally, wait for transmitter to become empty * and restore the IER */ wait_for_xmitr(up, BOTH_EMPTY); - serial_out(up, UART_IER, ier); + serial_port_out(port, UART_IER, ier); /* * The receive handling will happen properly because the @@ -2857,7 +2846,7 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count) serial8250_modem_status(up); if (locked) - spin_unlock(&up->port.lock); + spin_unlock(&port->lock); local_irq_restore(flags); } @@ -3002,17 +2991,18 @@ void serial8250_suspend_port(int line) void serial8250_resume_port(int line) { struct uart_8250_port *up = &serial8250_ports[line]; + struct uart_port *port = &up->port; if (up->capabilities & UART_NATSEMI) { /* Ensure it's still in high speed mode */ - serial_outp(up, UART_LCR, 0xE0); + serial_port_out(port, UART_LCR, 0xE0); ns16550a_goto_highspeed(up); - serial_outp(up, UART_LCR, 0); - up->port.uartclk = 921600*16; + serial_port_out(port, UART_LCR, 0); + port->uartclk = 921600*16; } - uart_resume_port(&serial8250_reg, &up->port); + uart_resume_port(&serial8250_reg, port); } /* diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h index ae027be57e2..2868a1da254 100644 --- a/drivers/tty/serial/8250/8250.h +++ b/drivers/tty/serial/8250/8250.h @@ -86,6 +86,16 @@ struct serial8250_config { #define SERIAL8250_SHARE_IRQS 0 #endif +static inline int serial_in(struct uart_8250_port *up, int offset) +{ + return up->port.serial_in(&up->port, offset); +} + +static inline void serial_out(struct uart_8250_port *up, int offset, int value) +{ + up->port.serial_out(&up->port, offset, value); +} + #if defined(__alpha__) && !defined(CONFIG_PCI) /* * Digital did something really horribly wrong with the OUT1 and OUT2 diff --git a/drivers/tty/serial/8250/serial_cs.c b/drivers/tty/serial/8250/serial_cs.c index 86090605a84..29b695d041e 100644 --- a/drivers/tty/serial/8250/serial_cs.c +++ b/drivers/tty/serial/8250/serial_cs.c @@ -43,7 +43,6 @@ #include <linux/delay.h> #include <linux/major.h> #include <asm/io.h> -#include <asm/system.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 2de99248dfa..665beb68f67 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -853,7 +853,7 @@ config SERIAL_MPC52xx_CONSOLE_BAUD config SERIAL_ICOM tristate "IBM Multiport Serial Adapter" - depends on PCI && (PPC_ISERIES || PPC_PSERIES) + depends on PCI && PPC_PSERIES select SERIAL_CORE select FW_LOADER help @@ -1347,4 +1347,17 @@ config SERIAL_AR933X_NR_UARTS Set this to the number of serial ports you want the driver to support. +config SERIAL_EFM32_UART + tristate "EFM32 UART/USART port." + depends on ARCH_EFM32 + select SERIAL_CORE + help + This driver support the USART and UART ports on + Energy Micro's efm32 SoCs. + +config SERIAL_EFM32_UART_CONSOLE + bool "EFM32 UART/USART console support" + depends on SERIAL_EFM32_UART=y + select SERIAL_CORE_CONSOLE + endmenu diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile index fef32e10c85..7257c5d898a 100644 --- a/drivers/tty/serial/Makefile +++ b/drivers/tty/serial/Makefile @@ -61,12 +61,12 @@ obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o obj-$(CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL) += nwpserial.o obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o obj-$(CONFIG_SERIAL_OMAP) += omap-serial.o +obj-$(CONFIG_SERIAL_ALTERA_UART) += altera_uart.o obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o obj-$(CONFIG_SERIAL_QE) += ucc_uart.o obj-$(CONFIG_SERIAL_TIMBERDALE) += timbuart.o obj-$(CONFIG_SERIAL_GRLIB_GAISLER_APBUART) += apbuart.o obj-$(CONFIG_SERIAL_ALTERA_JTAGUART) += altera_jtaguart.o -obj-$(CONFIG_SERIAL_ALTERA_UART) += altera_uart.o obj-$(CONFIG_SERIAL_VT8500) += vt8500_serial.o obj-$(CONFIG_SERIAL_MRST_MAX3110) += mrst_max3110.o obj-$(CONFIG_SERIAL_MFD_HSU) += mfd.o @@ -78,3 +78,4 @@ obj-$(CONFIG_SERIAL_LANTIQ) += lantiq.o obj-$(CONFIG_SERIAL_XILINX_PS_UART) += xilinx_uartps.o obj-$(CONFIG_SERIAL_SIRFSOC) += sirfsoc_uart.o obj-$(CONFIG_SERIAL_AR933X) += ar933x_uart.o +obj-$(CONFIG_SERIAL_EFM32_UART) += efm32-uart.o diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c index 1d04c5037f2..e7903751e05 100644 --- a/drivers/tty/serial/altera_uart.c +++ b/drivers/tty/serial/altera_uart.c @@ -377,6 +377,26 @@ static int altera_uart_verify_port(struct uart_port *port, return 0; } +#ifdef CONFIG_CONSOLE_POLL +static int altera_uart_poll_get_char(struct uart_port *port) +{ + while (!(altera_uart_readl(port, ALTERA_UART_STATUS_REG) & + ALTERA_UART_STATUS_RRDY_MSK)) + cpu_relax(); + + return altera_uart_readl(port, ALTERA_UART_RXDATA_REG); +} + +static void altera_uart_poll_put_char(struct uart_port *port, unsigned char c) +{ + while (!(altera_uart_readl(port, ALTERA_UART_STATUS_REG) & + ALTERA_UART_STATUS_TRDY_MSK)) + cpu_relax(); + + altera_uart_writel(port, c, ALTERA_UART_TXDATA_REG); +} +#endif + /* * Define the basic serial functions we support. */ @@ -397,35 +417,16 @@ static struct uart_ops altera_uart_ops = { .release_port = altera_uart_release_port, .config_port = altera_uart_config_port, .verify_port = altera_uart_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = altera_uart_poll_get_char, + .poll_put_char = altera_uart_poll_put_char, +#endif }; static struct altera_uart altera_uart_ports[CONFIG_SERIAL_ALTERA_UART_MAXPORTS]; #if defined(CONFIG_SERIAL_ALTERA_UART_CONSOLE) -int __init early_altera_uart_setup(struct altera_uart_platform_uart *platp) -{ - struct uart_port *port; - int i; - - for (i = 0; i < CONFIG_SERIAL_ALTERA_UART_MAXPORTS && platp[i].mapbase; i++) { - port = &altera_uart_ports[i].port; - - port->line = i; - port->type = PORT_ALTERA_UART; - port->mapbase = platp[i].mapbase; - port->membase = ioremap(port->mapbase, ALTERA_UART_SIZE); - port->iotype = SERIAL_IO_MEM; - port->irq = platp[i].irq; - port->uartclk = platp[i].uartclk; - port->flags = UPF_BOOT_AUTOCONF; - port->ops = &altera_uart_ops; - port->private_data = platp; - } - - return 0; -} - static void altera_uart_console_putc(struct uart_port *port, const char c) { while (!(altera_uart_readl(port, ALTERA_UART_STATUS_REG) & diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 6800f5f2624..0c65c9e6698 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -51,6 +51,7 @@ #include <linux/dma-mapping.h> #include <linux/scatterlist.h> #include <linux/delay.h> +#include <linux/types.h> #include <asm/io.h> #include <asm/sizes.h> @@ -271,6 +272,7 @@ static void pl011_dma_probe_initcall(struct uart_amba_port *uap) .dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE, .direction = DMA_MEM_TO_DEV, .dst_maxburst = uap->fifosize >> 1, + .device_fc = false, }; struct dma_chan *chan; dma_cap_mask_t mask; @@ -304,6 +306,7 @@ static void pl011_dma_probe_initcall(struct uart_amba_port *uap) .src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE, .direction = DMA_DEV_TO_MEM, .src_maxburst = uap->fifosize >> 1, + .device_fc = false, }; chan = dma_request_channel(mask, plat->dma_filter, plat->dma_rx_param); @@ -481,7 +484,7 @@ static int pl011_dma_tx_refill(struct uart_amba_port *uap) return -EBUSY; } - desc = dma_dev->device_prep_slave_sg(chan, &dmatx->sg, 1, DMA_MEM_TO_DEV, + desc = dmaengine_prep_slave_sg(chan, &dmatx->sg, 1, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc) { dma_unmap_sg(dma_dev->dev, &dmatx->sg, 1, DMA_TO_DEVICE); @@ -664,7 +667,6 @@ static void pl011_dma_rx_callback(void *data); static int pl011_dma_rx_trigger_dma(struct uart_amba_port *uap) { struct dma_chan *rxchan = uap->dmarx.chan; - struct dma_device *dma_dev; struct pl011_dmarx_data *dmarx = &uap->dmarx; struct dma_async_tx_descriptor *desc; struct pl011_sgbuf *sgbuf; @@ -675,8 +677,7 @@ static int pl011_dma_rx_trigger_dma(struct uart_amba_port *uap) /* Start the RX DMA job */ sgbuf = uap->dmarx.use_buf_b ? &uap->dmarx.sgbuf_b : &uap->dmarx.sgbuf_a; - dma_dev = rxchan->device; - desc = rxchan->device->device_prep_slave_sg(rxchan, &sgbuf->sg, 1, + desc = dmaengine_prep_slave_sg(rxchan, &sgbuf->sg, 1, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); /* @@ -827,7 +828,12 @@ static void pl011_dma_rx_callback(void *data) { struct uart_amba_port *uap = data; struct pl011_dmarx_data *dmarx = &uap->dmarx; + struct dma_chan *rxchan = dmarx->chan; bool lastbuf = dmarx->use_buf_b; + struct pl011_sgbuf *sgbuf = dmarx->use_buf_b ? + &dmarx->sgbuf_b : &dmarx->sgbuf_a; + size_t pending; + struct dma_tx_state state; int ret; /* @@ -838,11 +844,21 @@ static void pl011_dma_rx_callback(void *data) * we immediately trigger the next DMA job. */ spin_lock_irq(&uap->port.lock); + /* + * Rx data can be taken by the UART interrupts during + * the DMA irq handler. So we check the residue here. + */ + rxchan->device->device_tx_status(rxchan, dmarx->cookie, &state); + pending = sgbuf->sg.length - state.residue; + BUG_ON(pending > PL011_DMA_BUFFER_SIZE); + /* Then we terminate the transfer - we now know our residue */ + dmaengine_terminate_all(rxchan); + uap->dmarx.running = false; dmarx->use_buf_b = !lastbuf; ret = pl011_dma_rx_trigger_dma(uap); - pl011_dma_rx_chars(uap, PL011_DMA_BUFFER_SIZE, lastbuf, false); + pl011_dma_rx_chars(uap, pending, lastbuf, false); spin_unlock_irq(&uap->port.lock); /* * Do this check after we picked the DMA chars so we don't @@ -1381,6 +1397,10 @@ static int pl011_startup(struct uart_port *port) uap->port.uartclk = clk_get_rate(uap->clk); + /* Clear pending error and receive interrupts */ + writew(UART011_OEIS | UART011_BEIS | UART011_PEIS | UART011_FEIS | + UART011_RTIS | UART011_RXIS, uap->port.membase + UART011_ICR); + /* * Allocate the IRQ */ @@ -1417,10 +1437,6 @@ static int pl011_startup(struct uart_port *port) cr |= UART01x_CR_UARTEN | UART011_CR_RXE | UART011_CR_TXE; writew(cr, uap->port.membase + UART011_CR); - /* Clear pending error interrupts */ - writew(UART011_OEIS | UART011_BEIS | UART011_PEIS | UART011_FEIS, - uap->port.membase + UART011_ICR); - /* * initialise the old status of the modem signals */ @@ -1435,6 +1451,9 @@ static int pl011_startup(struct uart_port *port) * as well. */ spin_lock_irq(&uap->port.lock); + /* Clear out any spuriously appearing RX interrupts */ + writew(UART011_RTIS | UART011_RXIS, + uap->port.membase + UART011_ICR); uap->im = UART011_RTIM; if (!pl011_dma_rx_running(uap)) uap->im |= UART011_RXIM; @@ -1927,6 +1946,10 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id) goto unmap; } + /* Ensure interrupts from this UART are masked and cleared */ + writew(0, uap->port.membase + UART011_IMSC); + writew(0xffff, uap->port.membase + UART011_ICR); + uap->vendor = vendor; uap->lcrh_rx = vendor->lcrh_rx; uap->lcrh_tx = vendor->lcrh_tx; diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 10605ecc99a..f9a6be7a9be 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -1526,6 +1526,8 @@ void __init atmel_register_uart_fns(struct atmel_port_fns *fns) atmel_pops.set_wake = fns->set_wake; } +struct platform_device *atmel_default_console_device; /* the serial console device */ + #ifdef CONFIG_SERIAL_ATMEL_CONSOLE static void atmel_console_putchar(struct uart_port *port, int ch) { diff --git a/drivers/tty/serial/bfin_uart.c b/drivers/tty/serial/bfin_uart.c index 26953bfa692..5832fdef11e 100644 --- a/drivers/tty/serial/bfin_uart.c +++ b/drivers/tty/serial/bfin_uart.c @@ -535,11 +535,13 @@ static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id) * when start a new tx. */ UART_CLEAR_IER(uart, ETBEI); - xmit->tail = (xmit->tail + uart->tx_count) & (UART_XMIT_SIZE - 1); uart->port.icount.tx += uart->tx_count; + if (!uart_circ_empty(xmit)) { + xmit->tail = (xmit->tail + uart->tx_count) & (UART_XMIT_SIZE - 1); - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&uart->port); + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&uart->port); + } bfin_serial_dma_tx_chars(uart); } diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c index 1dfba7b779c..5b07c0c3a10 100644 --- a/drivers/tty/serial/crisv10.c +++ b/drivers/tty/serial/crisv10.c @@ -34,9 +34,9 @@ static char *serial_version = "$Revision: 1.25 $"; #include <asm/irq.h> #include <asm/dma.h> -#include <asm/system.h> #include <arch/svinto.h> +#include <arch/system.h> /* non-arch dependent serial structures are in linux/serial.h */ #include <linux/serial.h> @@ -4105,20 +4105,11 @@ static int rs_open(struct tty_struct *tty, struct file * filp) { struct e100_serial *info; - int retval, line; + int retval; unsigned long page; int allocated_resources = 0; - /* find which port we want to open */ - line = tty->index; - - if (line < 0 || line >= NR_PORTS) - return -ENODEV; - - /* find the corresponding e100_serial struct in the table */ - info = rs_table + line; - - /* don't allow the opening of ports that are not enabled in the HW config */ + info = rs_table + tty->index; if (!info->enabled) return -ENODEV; @@ -4131,7 +4122,7 @@ rs_open(struct tty_struct *tty, struct file * filp) tty->driver_data = info; info->port.tty = tty; - info->port.tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0; + tty->low_latency = !!(info->flags & ASYNC_LOW_LATENCY); if (!tmp_buf) { page = get_zeroed_page(GFP_KERNEL); diff --git a/drivers/tty/serial/dz.c b/drivers/tty/serial/dz.c index e3699a84049..6491b8644a7 100644 --- a/drivers/tty/serial/dz.c +++ b/drivers/tty/serial/dz.c @@ -52,7 +52,6 @@ #include <linux/atomic.h> #include <asm/bootinfo.h> #include <asm/io.h> -#include <asm/system.h> #include <asm/dec/interrupts.h> #include <asm/dec/kn01.h> diff --git a/drivers/tty/serial/efm32-uart.c b/drivers/tty/serial/efm32-uart.c new file mode 100644 index 00000000000..615e4647049 --- /dev/null +++ b/drivers/tty/serial/efm32-uart.c @@ -0,0 +1,830 @@ +#if defined(CONFIG_SERIAL_EFM32_UART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/io.h> +#include <linux/platform_device.h> +#include <linux/console.h> +#include <linux/sysrq.h> +#include <linux/serial_core.h> +#include <linux/tty_flip.h> +#include <linux/slab.h> +#include <linux/clk.h> +#include <linux/of.h> +#include <linux/of_device.h> + +#include <linux/platform_data/efm32-uart.h> + +#define DRIVER_NAME "efm32-uart" +#define DEV_NAME "ttyefm" + +#define UARTn_CTRL 0x00 +#define UARTn_CTRL_SYNC 0x0001 +#define UARTn_CTRL_TXBIL 0x1000 + +#define UARTn_FRAME 0x04 +#define UARTn_FRAME_DATABITS__MASK 0x000f +#define UARTn_FRAME_DATABITS(n) ((n) - 3) +#define UARTn_FRAME_PARITY_NONE 0x0000 +#define UARTn_FRAME_PARITY_EVEN 0x0200 +#define UARTn_FRAME_PARITY_ODD 0x0300 +#define UARTn_FRAME_STOPBITS_HALF 0x0000 +#define UARTn_FRAME_STOPBITS_ONE 0x1000 +#define UARTn_FRAME_STOPBITS_TWO 0x3000 + +#define UARTn_CMD 0x0c +#define UARTn_CMD_RXEN 0x0001 +#define UARTn_CMD_RXDIS 0x0002 +#define UARTn_CMD_TXEN 0x0004 +#define UARTn_CMD_TXDIS 0x0008 + +#define UARTn_STATUS 0x10 +#define UARTn_STATUS_TXENS 0x0002 +#define UARTn_STATUS_TXC 0x0020 +#define UARTn_STATUS_TXBL 0x0040 +#define UARTn_STATUS_RXDATAV 0x0080 + +#define UARTn_CLKDIV 0x14 + +#define UARTn_RXDATAX 0x18 +#define UARTn_RXDATAX_RXDATA__MASK 0x01ff +#define UARTn_RXDATAX_PERR 0x4000 +#define UARTn_RXDATAX_FERR 0x8000 +/* + * This is a software only flag used for ignore_status_mask and + * read_status_mask! It's used for breaks that the hardware doesn't report + * explicitly. + */ +#define SW_UARTn_RXDATAX_BERR 0x2000 + +#define UARTn_TXDATA 0x34 + +#define UARTn_IF 0x40 +#define UARTn_IF_TXC 0x0001 +#define UARTn_IF_TXBL 0x0002 +#define UARTn_IF_RXDATAV 0x0004 +#define UARTn_IF_RXOF 0x0010 + +#define UARTn_IFS 0x44 +#define UARTn_IFC 0x48 +#define UARTn_IEN 0x4c + +#define UARTn_ROUTE 0x54 +#define UARTn_ROUTE_LOCATION__MASK 0x0700 +#define UARTn_ROUTE_LOCATION(n) (((n) << 8) & UARTn_ROUTE_LOCATION__MASK) +#define UARTn_ROUTE_RXPEN 0x0001 +#define UARTn_ROUTE_TXPEN 0x0002 + +struct efm32_uart_port { + struct uart_port port; + unsigned int txirq; + struct clk *clk; +}; +#define to_efm_port(_port) container_of(_port, struct efm32_uart_port, port) +#define efm_debug(efm_port, format, arg...) \ + dev_dbg(efm_port->port.dev, format, ##arg) + +static void efm32_uart_write32(struct efm32_uart_port *efm_port, + u32 value, unsigned offset) +{ + writel_relaxed(value, efm_port->port.membase + offset); +} + +static u32 efm32_uart_read32(struct efm32_uart_port *efm_port, + unsigned offset) +{ + return readl_relaxed(efm_port->port.membase + offset); +} + +static unsigned int efm32_uart_tx_empty(struct uart_port *port) +{ + struct efm32_uart_port *efm_port = to_efm_port(port); + u32 status = efm32_uart_read32(efm_port, UARTn_STATUS); + + if (status & UARTn_STATUS_TXC) + return TIOCSER_TEMT; + else + return 0; +} + +static void efm32_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + /* sorry, neither handshaking lines nor loop functionallity */ +} + +static unsigned int efm32_uart_get_mctrl(struct uart_port *port) +{ + /* sorry, no handshaking lines available */ + return TIOCM_CAR | TIOCM_CTS | TIOCM_DSR; +} + +static void efm32_uart_stop_tx(struct uart_port *port) +{ + struct efm32_uart_port *efm_port = to_efm_port(port); + u32 ien = efm32_uart_read32(efm_port, UARTn_IEN); + + efm32_uart_write32(efm_port, UARTn_CMD_TXDIS, UARTn_CMD); + ien &= ~(UARTn_IF_TXC | UARTn_IF_TXBL); + efm32_uart_write32(efm_port, ien, UARTn_IEN); +} + +static void efm32_uart_tx_chars(struct efm32_uart_port *efm_port) +{ + struct uart_port *port = &efm_port->port; + struct circ_buf *xmit = &port->state->xmit; + + while (efm32_uart_read32(efm_port, UARTn_STATUS) & + UARTn_STATUS_TXBL) { + if (port->x_char) { + port->icount.tx++; + efm32_uart_write32(efm_port, port->x_char, + UARTn_TXDATA); + port->x_char = 0; + continue; + } + if (!uart_circ_empty(xmit) && !uart_tx_stopped(port)) { + port->icount.tx++; + efm32_uart_write32(efm_port, xmit->buf[xmit->tail], + UARTn_TXDATA); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + } else + break; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (!port->x_char && uart_circ_empty(xmit) && + efm32_uart_read32(efm_port, UARTn_STATUS) & + UARTn_STATUS_TXC) + efm32_uart_stop_tx(port); +} + +static void efm32_uart_start_tx(struct uart_port *port) +{ + struct efm32_uart_port *efm_port = to_efm_port(port); + u32 ien; + + efm32_uart_write32(efm_port, + UARTn_IF_TXBL | UARTn_IF_TXC, UARTn_IFC); + ien = efm32_uart_read32(efm_port, UARTn_IEN); + efm32_uart_write32(efm_port, + ien | UARTn_IF_TXBL | UARTn_IF_TXC, UARTn_IEN); + efm32_uart_write32(efm_port, UARTn_CMD_TXEN, UARTn_CMD); + + efm32_uart_tx_chars(efm_port); +} + +static void efm32_uart_stop_rx(struct uart_port *port) +{ + struct efm32_uart_port *efm_port = to_efm_port(port); + + efm32_uart_write32(efm_port, UARTn_CMD_RXDIS, UARTn_CMD); +} + +static void efm32_uart_enable_ms(struct uart_port *port) +{ + /* no handshake lines, no modem status interrupts */ +} + +static void efm32_uart_break_ctl(struct uart_port *port, int ctl) +{ + /* not possible without fiddling with gpios */ +} + +static void efm32_uart_rx_chars(struct efm32_uart_port *efm_port, + struct tty_struct *tty) +{ + struct uart_port *port = &efm_port->port; + + while (efm32_uart_read32(efm_port, UARTn_STATUS) & + UARTn_STATUS_RXDATAV) { + u32 rxdata = efm32_uart_read32(efm_port, UARTn_RXDATAX); + int flag = 0; + + /* + * This is a reserved bit and I only saw it read as 0. But to be + * sure not to be confused too much by new devices adhere to the + * warning in the reference manual that reserverd bits might + * read as 1 in the future. + */ + rxdata &= ~SW_UARTn_RXDATAX_BERR; + + port->icount.rx++; + + if ((rxdata & UARTn_RXDATAX_FERR) && + !(rxdata & UARTn_RXDATAX_RXDATA__MASK)) { + rxdata |= SW_UARTn_RXDATAX_BERR; + port->icount.brk++; + if (uart_handle_break(port)) + continue; + } else if (rxdata & UARTn_RXDATAX_PERR) + port->icount.parity++; + else if (rxdata & UARTn_RXDATAX_FERR) + port->icount.frame++; + + rxdata &= port->read_status_mask; + + if (rxdata & SW_UARTn_RXDATAX_BERR) + flag = TTY_BREAK; + else if (rxdata & UARTn_RXDATAX_PERR) + flag = TTY_PARITY; + else if (rxdata & UARTn_RXDATAX_FERR) + flag = TTY_FRAME; + else if (uart_handle_sysrq_char(port, + rxdata & UARTn_RXDATAX_RXDATA__MASK)) + continue; + + if (tty && (rxdata & port->ignore_status_mask) == 0) + tty_insert_flip_char(tty, + rxdata & UARTn_RXDATAX_RXDATA__MASK, flag); + } +} + +static irqreturn_t efm32_uart_rxirq(int irq, void *data) +{ + struct efm32_uart_port *efm_port = data; + u32 irqflag = efm32_uart_read32(efm_port, UARTn_IF); + int handled = IRQ_NONE; + struct uart_port *port = &efm_port->port; + struct tty_struct *tty; + + spin_lock(&port->lock); + + tty = tty_kref_get(port->state->port.tty); + + if (irqflag & UARTn_IF_RXDATAV) { + efm32_uart_write32(efm_port, UARTn_IF_RXDATAV, UARTn_IFC); + efm32_uart_rx_chars(efm_port, tty); + + handled = IRQ_HANDLED; + } + + if (irqflag & UARTn_IF_RXOF) { + efm32_uart_write32(efm_port, UARTn_IF_RXOF, UARTn_IFC); + port->icount.overrun++; + if (tty) + tty_insert_flip_char(tty, 0, TTY_OVERRUN); + + handled = IRQ_HANDLED; + } + + if (tty) { + tty_flip_buffer_push(tty); + tty_kref_put(tty); + } + + spin_unlock(&port->lock); + + return handled; +} + +static irqreturn_t efm32_uart_txirq(int irq, void *data) +{ + struct efm32_uart_port *efm_port = data; + u32 irqflag = efm32_uart_read32(efm_port, UARTn_IF); + + /* TXBL doesn't need to be cleared */ + if (irqflag & UARTn_IF_TXC) + efm32_uart_write32(efm_port, UARTn_IF_TXC, UARTn_IFC); + + if (irqflag & (UARTn_IF_TXC | UARTn_IF_TXBL)) { + efm32_uart_tx_chars(efm_port); + return IRQ_HANDLED; + } else + return IRQ_NONE; +} + +static int efm32_uart_startup(struct uart_port *port) +{ + struct efm32_uart_port *efm_port = to_efm_port(port); + u32 location = 0; + struct efm32_uart_pdata *pdata = dev_get_platdata(port->dev); + int ret; + + if (pdata) + location = UARTn_ROUTE_LOCATION(pdata->location); + + ret = clk_enable(efm_port->clk); + if (ret) { + efm_debug(efm_port, "failed to enable clk\n"); + goto err_clk_enable; + } + port->uartclk = clk_get_rate(efm_port->clk); + + /* Enable pins at configured location */ + efm32_uart_write32(efm_port, location | UARTn_ROUTE_RXPEN | UARTn_ROUTE_TXPEN, + UARTn_ROUTE); + + ret = request_irq(port->irq, efm32_uart_rxirq, 0, + DRIVER_NAME, efm_port); + if (ret) { + efm_debug(efm_port, "failed to register rxirq\n"); + goto err_request_irq_rx; + } + + /* disable all irqs */ + efm32_uart_write32(efm_port, 0, UARTn_IEN); + + ret = request_irq(efm_port->txirq, efm32_uart_txirq, 0, + DRIVER_NAME, efm_port); + if (ret) { + efm_debug(efm_port, "failed to register txirq\n"); + free_irq(port->irq, efm_port); +err_request_irq_rx: + + clk_disable(efm_port->clk); + } else { + efm32_uart_write32(efm_port, + UARTn_IF_RXDATAV | UARTn_IF_RXOF, UARTn_IEN); + efm32_uart_write32(efm_port, UARTn_CMD_RXEN, UARTn_CMD); + } + +err_clk_enable: + return ret; +} + +static void efm32_uart_shutdown(struct uart_port *port) +{ + struct efm32_uart_port *efm_port = to_efm_port(port); + + efm32_uart_write32(efm_port, 0, UARTn_IEN); + free_irq(port->irq, efm_port); + + clk_disable(efm_port->clk); +} + +static void efm32_uart_set_termios(struct uart_port *port, + struct ktermios *new, struct ktermios *old) +{ + struct efm32_uart_port *efm_port = to_efm_port(port); + unsigned long flags; + unsigned baud; + u32 clkdiv; + u32 frame = 0; + + /* no modem control lines */ + new->c_cflag &= ~(CRTSCTS | CMSPAR); + + baud = uart_get_baud_rate(port, new, old, + DIV_ROUND_CLOSEST(port->uartclk, 16 * 8192), + DIV_ROUND_CLOSEST(port->uartclk, 16)); + + switch (new->c_cflag & CSIZE) { + case CS5: + frame |= UARTn_FRAME_DATABITS(5); + break; + case CS6: + frame |= UARTn_FRAME_DATABITS(6); + break; + case CS7: + frame |= UARTn_FRAME_DATABITS(7); + break; + case CS8: + frame |= UARTn_FRAME_DATABITS(8); + break; + } + + if (new->c_cflag & CSTOPB) + /* the receiver only verifies the first stop bit */ + frame |= UARTn_FRAME_STOPBITS_TWO; + else + frame |= UARTn_FRAME_STOPBITS_ONE; + + if (new->c_cflag & PARENB) { + if (new->c_cflag & PARODD) + frame |= UARTn_FRAME_PARITY_ODD; + else + frame |= UARTn_FRAME_PARITY_EVEN; + } else + frame |= UARTn_FRAME_PARITY_NONE; + + /* + * the 6 lowest bits of CLKDIV are dc, bit 6 has value 0.25. + * port->uartclk <= 14e6, so 4 * port->uartclk doesn't overflow. + */ + clkdiv = (DIV_ROUND_CLOSEST(4 * port->uartclk, 16 * baud) - 4) << 6; + + spin_lock_irqsave(&port->lock, flags); + + efm32_uart_write32(efm_port, + UARTn_CMD_TXDIS | UARTn_CMD_RXDIS, UARTn_CMD); + + port->read_status_mask = UARTn_RXDATAX_RXDATA__MASK; + if (new->c_iflag & INPCK) + port->read_status_mask |= + UARTn_RXDATAX_FERR | UARTn_RXDATAX_PERR; + if (new->c_iflag & (BRKINT | PARMRK)) + port->read_status_mask |= SW_UARTn_RXDATAX_BERR; + + port->ignore_status_mask = 0; + if (new->c_iflag & IGNPAR) + port->ignore_status_mask |= + UARTn_RXDATAX_FERR | UARTn_RXDATAX_PERR; + if (new->c_iflag & IGNBRK) + port->ignore_status_mask |= SW_UARTn_RXDATAX_BERR; + + uart_update_timeout(port, new->c_cflag, baud); + + efm32_uart_write32(efm_port, UARTn_CTRL_TXBIL, UARTn_CTRL); + efm32_uart_write32(efm_port, frame, UARTn_FRAME); + efm32_uart_write32(efm_port, clkdiv, UARTn_CLKDIV); + + efm32_uart_write32(efm_port, UARTn_CMD_TXEN | UARTn_CMD_RXEN, + UARTn_CMD); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *efm32_uart_type(struct uart_port *port) +{ + return port->type == PORT_EFMUART ? "efm32-uart" : NULL; +} + +static void efm32_uart_release_port(struct uart_port *port) +{ + struct efm32_uart_port *efm_port = to_efm_port(port); + + clk_unprepare(efm_port->clk); + clk_put(efm_port->clk); + iounmap(port->membase); +} + +static int efm32_uart_request_port(struct uart_port *port) +{ + struct efm32_uart_port *efm_port = to_efm_port(port); + int ret; + + port->membase = ioremap(port->mapbase, 60); + if (!efm_port->port.membase) { + ret = -ENOMEM; + efm_debug(efm_port, "failed to remap\n"); + goto err_ioremap; + } + + efm_port->clk = clk_get(port->dev, NULL); + if (IS_ERR(efm_port->clk)) { + ret = PTR_ERR(efm_port->clk); + efm_debug(efm_port, "failed to get clock\n"); + goto err_clk_get; + } + + ret = clk_prepare(efm_port->clk); + if (ret) { + clk_put(efm_port->clk); +err_clk_get: + + iounmap(port->membase); +err_ioremap: + return ret; + } + return 0; +} + +static void efm32_uart_config_port(struct uart_port *port, int type) +{ + if (type & UART_CONFIG_TYPE && + !efm32_uart_request_port(port)) + port->type = PORT_EFMUART; +} + +static int efm32_uart_verify_port(struct uart_port *port, + struct serial_struct *serinfo) +{ + int ret = 0; + + if (serinfo->type != PORT_UNKNOWN && serinfo->type != PORT_EFMUART) + ret = -EINVAL; + + return ret; +} + +static struct uart_ops efm32_uart_pops = { + .tx_empty = efm32_uart_tx_empty, + .set_mctrl = efm32_uart_set_mctrl, + .get_mctrl = efm32_uart_get_mctrl, + .stop_tx = efm32_uart_stop_tx, + .start_tx = efm32_uart_start_tx, + .stop_rx = efm32_uart_stop_rx, + .enable_ms = efm32_uart_enable_ms, + .break_ctl = efm32_uart_break_ctl, + .startup = efm32_uart_startup, + .shutdown = efm32_uart_shutdown, + .set_termios = efm32_uart_set_termios, + .type = efm32_uart_type, + .release_port = efm32_uart_release_port, + .request_port = efm32_uart_request_port, + .config_port = efm32_uart_config_port, + .verify_port = efm32_uart_verify_port, +}; + +static struct efm32_uart_port *efm32_uart_ports[5]; + +#ifdef CONFIG_SERIAL_EFM32_UART_CONSOLE +static void efm32_uart_console_putchar(struct uart_port *port, int ch) +{ + struct efm32_uart_port *efm_port = to_efm_port(port); + unsigned int timeout = 0x400; + u32 status; + + while (1) { + status = efm32_uart_read32(efm_port, UARTn_STATUS); + + if (status & UARTn_STATUS_TXBL) + break; + if (!timeout--) + return; + } + efm32_uart_write32(efm_port, ch, UARTn_TXDATA); +} + +static void efm32_uart_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct efm32_uart_port *efm_port = efm32_uart_ports[co->index]; + u32 status = efm32_uart_read32(efm_port, UARTn_STATUS); + unsigned int timeout = 0x400; + + if (!(status & UARTn_STATUS_TXENS)) + efm32_uart_write32(efm_port, UARTn_CMD_TXEN, UARTn_CMD); + + uart_console_write(&efm_port->port, s, count, + efm32_uart_console_putchar); + + /* Wait for the transmitter to become empty */ + while (1) { + u32 status = efm32_uart_read32(efm_port, UARTn_STATUS); + if (status & UARTn_STATUS_TXC) + break; + if (!timeout--) + break; + } + + if (!(status & UARTn_STATUS_TXENS)) + efm32_uart_write32(efm_port, UARTn_CMD_TXDIS, UARTn_CMD); +} + +static void efm32_uart_console_get_options(struct efm32_uart_port *efm_port, + int *baud, int *parity, int *bits) +{ + u32 ctrl = efm32_uart_read32(efm_port, UARTn_CTRL); + u32 route, clkdiv, frame; + + if (ctrl & UARTn_CTRL_SYNC) + /* not operating in async mode */ + return; + + route = efm32_uart_read32(efm_port, UARTn_ROUTE); + if (!(route & UARTn_ROUTE_TXPEN)) + /* tx pin not routed */ + return; + + clkdiv = efm32_uart_read32(efm_port, UARTn_CLKDIV); + + *baud = DIV_ROUND_CLOSEST(4 * efm_port->port.uartclk, + 16 * (4 + (clkdiv >> 6))); + + frame = efm32_uart_read32(efm_port, UARTn_FRAME); + if (frame & UARTn_FRAME_PARITY_ODD) + *parity = 'o'; + else if (frame & UARTn_FRAME_PARITY_EVEN) + *parity = 'e'; + else + *parity = 'n'; + + *bits = (frame & UARTn_FRAME_DATABITS__MASK) - + UARTn_FRAME_DATABITS(4) + 4; + + efm_debug(efm_port, "get_opts: options=%d%c%d\n", + *baud, *parity, *bits); +} + +static int efm32_uart_console_setup(struct console *co, char *options) +{ + struct efm32_uart_port *efm_port; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + int ret; + + if (co->index < 0 || co->index >= ARRAY_SIZE(efm32_uart_ports)) { + unsigned i; + for (i = 0; i < ARRAY_SIZE(efm32_uart_ports); ++i) { + if (efm32_uart_ports[i]) { + pr_warn("efm32-console: fall back to console index %u (from %hhi)\n", + i, co->index); + co->index = i; + break; + } + } + } + + efm_port = efm32_uart_ports[co->index]; + if (!efm_port) { + pr_warn("efm32-console: No port at %d\n", co->index); + return -ENODEV; + } + + ret = clk_prepare(efm_port->clk); + if (ret) { + dev_warn(efm_port->port.dev, + "console: clk_prepare failed: %d\n", ret); + return ret; + } + + efm_port->port.uartclk = clk_get_rate(efm_port->clk); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + else + efm32_uart_console_get_options(efm_port, + &baud, &parity, &bits); + + return uart_set_options(&efm_port->port, co, baud, parity, bits, flow); +} + +static struct uart_driver efm32_uart_reg; + +static struct console efm32_uart_console = { + .name = DEV_NAME, + .write = efm32_uart_console_write, + .device = uart_console_device, + .setup = efm32_uart_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &efm32_uart_reg, +}; + +#else +#define efm32_uart_console (*(struct console *)NULL) +#endif /* ifdef CONFIG_SERIAL_EFM32_UART_CONSOLE / else */ + +static struct uart_driver efm32_uart_reg = { + .owner = THIS_MODULE, + .driver_name = DRIVER_NAME, + .dev_name = DEV_NAME, + .nr = ARRAY_SIZE(efm32_uart_ports), + .cons = &efm32_uart_console, +}; + +static int efm32_uart_probe_dt(struct platform_device *pdev, + struct efm32_uart_port *efm_port) +{ + struct device_node *np = pdev->dev.of_node; + int ret; + + if (!np) + return 1; + + ret = of_alias_get_id(np, "serial"); + if (ret < 0) { + dev_err(&pdev->dev, "failed to get alias id: %d\n", ret); + return ret; + } else { + efm_port->port.line = ret; + return 0; + } + +} + +static int __devinit efm32_uart_probe(struct platform_device *pdev) +{ + struct efm32_uart_port *efm_port; + struct resource *res; + int ret; + + efm_port = kzalloc(sizeof(*efm_port), GFP_KERNEL); + if (!efm_port) { + dev_dbg(&pdev->dev, "failed to allocate private data\n"); + return -ENOMEM; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + ret = -ENODEV; + dev_dbg(&pdev->dev, "failed to determine base address\n"); + goto err_get_base; + } + + if (resource_size(res) < 60) { + ret = -EINVAL; + dev_dbg(&pdev->dev, "memory resource too small\n"); + goto err_too_small; + } + + ret = platform_get_irq(pdev, 0); + if (ret <= 0) { + dev_dbg(&pdev->dev, "failed to get rx irq\n"); + goto err_get_rxirq; + } + + efm_port->port.irq = ret; + + ret = platform_get_irq(pdev, 1); + if (ret <= 0) + ret = efm_port->port.irq + 1; + + efm_port->txirq = ret; + + efm_port->port.dev = &pdev->dev; + efm_port->port.mapbase = res->start; + efm_port->port.type = PORT_EFMUART; + efm_port->port.iotype = UPIO_MEM32; + efm_port->port.fifosize = 2; + efm_port->port.ops = &efm32_uart_pops; + efm_port->port.flags = UPF_BOOT_AUTOCONF; + + ret = efm32_uart_probe_dt(pdev, efm_port); + if (ret > 0) + /* not created by device tree */ + efm_port->port.line = pdev->id; + + if (efm_port->port.line >= 0 && + efm_port->port.line < ARRAY_SIZE(efm32_uart_ports)) + efm32_uart_ports[efm_port->port.line] = efm_port; + + ret = uart_add_one_port(&efm32_uart_reg, &efm_port->port); + if (ret) { + dev_dbg(&pdev->dev, "failed to add port: %d\n", ret); + + if (pdev->id >= 0 && pdev->id < ARRAY_SIZE(efm32_uart_ports)) + efm32_uart_ports[pdev->id] = NULL; +err_get_rxirq: +err_too_small: +err_get_base: + kfree(efm_port); + } else { + platform_set_drvdata(pdev, efm_port); + dev_dbg(&pdev->dev, "\\o/\n"); + } + + return ret; +} + +static int __devexit efm32_uart_remove(struct platform_device *pdev) +{ + struct efm32_uart_port *efm_port = platform_get_drvdata(pdev); + + platform_set_drvdata(pdev, NULL); + + uart_remove_one_port(&efm32_uart_reg, &efm_port->port); + + if (pdev->id >= 0 && pdev->id < ARRAY_SIZE(efm32_uart_ports)) + efm32_uart_ports[pdev->id] = NULL; + + kfree(efm_port); + + return 0; +} + +static struct of_device_id efm32_uart_dt_ids[] = { + { + .compatible = "efm32,uart", + }, { + /* sentinel */ + } +}; +MODULE_DEVICE_TABLE(of, efm32_uart_dt_ids); + +static struct platform_driver efm32_uart_driver = { + .probe = efm32_uart_probe, + .remove = __devexit_p(efm32_uart_remove), + + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + .of_match_table = efm32_uart_dt_ids, + }, +}; + +static int __init efm32_uart_init(void) +{ + int ret; + + ret = uart_register_driver(&efm32_uart_reg); + if (ret) + return ret; + + ret = platform_driver_register(&efm32_uart_driver); + if (ret) + uart_unregister_driver(&efm32_uart_reg); + + pr_info("EFM32 UART/USART driver\n"); + + return ret; +} +module_init(efm32_uart_init); + +static void __exit efm32_uart_exit(void) +{ + platform_driver_unregister(&efm32_uart_driver); + uart_unregister_driver(&efm32_uart_reg); +} + +MODULE_AUTHOR("Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>"); +MODULE_DESCRIPTION("EFM32 UART/USART driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:" DRIVER_NAME); diff --git a/drivers/tty/serial/icom.c b/drivers/tty/serial/icom.c index d55709a7a75..defc4e3393a 100644 --- a/drivers/tty/serial/icom.c +++ b/drivers/tty/serial/icom.c @@ -52,7 +52,6 @@ #include <linux/firmware.h> #include <linux/bitops.h> -#include <asm/system.h> #include <asm/io.h> #include <asm/irq.h> #include <asm/uaccess.h> diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c index 7e925e20cba..144cd3987d4 100644 --- a/drivers/tty/serial/ifx6x60.c +++ b/drivers/tty/serial/ifx6x60.c @@ -1375,12 +1375,9 @@ static int __init ifx_spi_init(void) return -ENOMEM; } - tty_drv->magic = TTY_DRIVER_MAGIC; - tty_drv->owner = THIS_MODULE; tty_drv->driver_name = DRVNAME; tty_drv->name = TTYNAME; tty_drv->minor_start = IFX_SPI_TTY_ID; - tty_drv->num = 1; tty_drv->type = TTY_DRIVER_TYPE_SERIAL; tty_drv->subtype = SERIAL_TYPE_NORMAL; tty_drv->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 0b7fed746b2..e7feceeebc2 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -1508,7 +1508,7 @@ static int serial_imx_probe(struct platform_device *pdev) ret = PTR_ERR(sport->clk); goto unmap; } - clk_enable(sport->clk); + clk_prepare_enable(sport->clk); sport->port.uartclk = clk_get_rate(sport->clk); @@ -1531,8 +1531,8 @@ deinit: if (pdata && pdata->exit) pdata->exit(pdev); clkput: + clk_disable_unprepare(sport->clk); clk_put(sport->clk); - clk_disable(sport->clk); unmap: iounmap(sport->port.membase); free: @@ -1552,11 +1552,10 @@ static int serial_imx_remove(struct platform_device *pdev) if (sport) { uart_remove_one_port(&imx_reg, &sport->port); + clk_disable_unprepare(sport->clk); clk_put(sport->clk); } - clk_disable(sport->clk); - if (pdata && pdata->exit) pdata->exit(pdev); diff --git a/drivers/tty/serial/ioc4_serial.c b/drivers/tty/serial/ioc4_serial.c index 6b36c1554d7..e16894fb2ca 100644 --- a/drivers/tty/serial/ioc4_serial.c +++ b/drivers/tty/serial/ioc4_serial.c @@ -16,7 +16,6 @@ #include <linux/tty.h> #include <linux/tty_flip.h> #include <linux/serial.h> -#include <linux/serialP.h> #include <linux/circ_buf.h> #include <linux/serial_reg.h> #include <linux/module.h> @@ -975,7 +974,7 @@ intr_connect(struct ioc4_soft *soft, int type, BUG_ON(!((type == IOC4_SIO_INTR_TYPE) || (type == IOC4_OTHER_INTR_TYPE))); - i = atomic_inc(&soft-> is_intr_type[type].is_num_intrs) - 1; + i = atomic_inc_return(&soft-> is_intr_type[type].is_num_intrs) - 1; BUG_ON(!(i < MAX_IOC4_INTR_ENTS || (printk("i %d\n", i), 0))); /* Save off the lower level interrupt handler */ diff --git a/drivers/tty/serial/m32r_sio.c b/drivers/tty/serial/m32r_sio.c index 94a6792bf97..a0703624d5e 100644 --- a/drivers/tty/serial/m32r_sio.c +++ b/drivers/tty/serial/m32r_sio.c @@ -38,7 +38,6 @@ #include <linux/console.h> #include <linux/sysrq.h> #include <linux/serial.h> -#include <linux/serialP.h> #include <linux/delay.h> #include <asm/m32r.h> @@ -70,13 +69,6 @@ #define PASS_LIMIT 256 -/* - * We default to IRQ0 for the "no irq" hack. Some - * machine types want others as well - they're free - * to redefine this in their header file. - */ -#define is_real_interrupt(irq) ((irq) != 0) - #define BASE_BAUD 115200 /* Standard COM flags */ @@ -640,7 +632,7 @@ static int m32r_sio_startup(struct uart_port *port) * hardware interrupt, we use a timer-based system. The original * driver used to do this with IRQ0. */ - if (!is_real_interrupt(up->port.irq)) { + if (!up->port.irq) { unsigned int timeout = up->port.timeout; timeout = timeout > 6 ? (timeout / 2 - 2) : 1; @@ -687,7 +679,7 @@ static void m32r_sio_shutdown(struct uart_port *port) sio_init(); - if (!is_real_interrupt(up->port.irq)) + if (!up->port.irq) del_timer_sync(&up->timer); else serial_unlink_irq_chain(up); diff --git a/drivers/tty/serial/m32r_sio.h b/drivers/tty/serial/m32r_sio.h index e9b7e11793b..8129824496c 100644 --- a/drivers/tty/serial/m32r_sio.h +++ b/drivers/tty/serial/m32r_sio.h @@ -15,6 +15,7 @@ * (at your option) any later version. */ +#include <linux/pci.h> struct m32r_sio_probe { struct module *owner; diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c index 1093a88a1fe..bedac0d4c9c 100644 --- a/drivers/tty/serial/mpc52xx_uart.c +++ b/drivers/tty/serial/mpc52xx_uart.c @@ -262,8 +262,9 @@ static unsigned int mpc5200b_psc_set_baudrate(struct uart_port *port, port->uartclk / 4); divisor = (port->uartclk + 2 * baud) / (4 * baud); - /* select the proper prescaler and set the divisor */ - if (divisor > 0xffff) { + /* select the proper prescaler and set the divisor + * prefer high prescaler for more tolerance on low baudrates */ + if (divisor > 0xffff || baud <= 115200) { divisor = (divisor + 4) / 8; prescaler = 0xdd00; /* /32 */ } else @@ -507,7 +508,7 @@ static int __init mpc512x_psc_fifoc_init(void) psc_fifoc_irq = irq_of_parse_and_map(np, 0); of_node_put(np); - if (psc_fifoc_irq == NO_IRQ) { + if (psc_fifoc_irq == 0) { pr_err("%s: Can't get FIFOC irq\n", __func__); iounmap(psc_fifoc); return -ENODEV; @@ -1354,7 +1355,7 @@ static int __devinit mpc52xx_uart_of_probe(struct platform_device *op) } psc_ops->get_irq(port, op->dev.of_node); - if (port->irq == NO_IRQ) { + if (port->irq == 0) { dev_dbg(&op->dev, "Could not get irq\n"); return -EINVAL; } diff --git a/drivers/tty/serial/msm_serial_hs.c b/drivers/tty/serial/msm_serial_hs.c index 5e85e1e14c4..fca13dc73e2 100644 --- a/drivers/tty/serial/msm_serial_hs.c +++ b/drivers/tty/serial/msm_serial_hs.c @@ -50,7 +50,6 @@ #include <linux/atomic.h> #include <asm/irq.h> -#include <asm/system.h> #include <mach/hardware.h> #include <mach/dma.h> diff --git a/drivers/tty/serial/msm_smd_tty.c b/drivers/tty/serial/msm_smd_tty.c index 4f41dcdcb77..b25e6ee7144 100644 --- a/drivers/tty/serial/msm_smd_tty.c +++ b/drivers/tty/serial/msm_smd_tty.c @@ -203,7 +203,6 @@ static int __init smd_tty_init(void) if (smd_tty_driver == 0) return -ENOMEM; - smd_tty_driver->owner = THIS_MODULE; smd_tty_driver->driver_name = "smd_tty_driver"; smd_tty_driver->name = "smd"; smd_tty_driver->major = 0; diff --git a/drivers/tty/serial/mux.c b/drivers/tty/serial/mux.c index 06f6aefd5ba..7ea8a263fd9 100644 --- a/drivers/tty/serial/mux.c +++ b/drivers/tty/serial/mux.c @@ -17,7 +17,6 @@ */ #include <linux/module.h> -#include <linux/tty.h> #include <linux/ioport.h> #include <linux/init.h> #include <linux/serial.h> @@ -499,7 +498,7 @@ static int __init mux_probe(struct parisc_device *dev) port->membase = ioremap_nocache(port->mapbase, MUX_LINE_OFFSET); port->iotype = UPIO_MEM; port->type = PORT_MUX; - port->irq = NO_IRQ; + port->irq = 0; port->uartclk = 0; port->fifosize = MUX_FIFO_SIZE; port->ops = &mux_pops; diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index f80904145fd..0121486ac4f 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -159,7 +159,7 @@ static void serial_omap_stop_tx(struct uart_port *port) serial_out(up, UART_IER, up->ier); } - if (!up->use_dma && pdata->set_forceidle) + if (!up->use_dma && pdata && pdata->set_forceidle) pdata->set_forceidle(up->pdev); pm_runtime_mark_last_busy(&up->pdev->dev); @@ -298,7 +298,7 @@ static void serial_omap_start_tx(struct uart_port *port) if (!up->use_dma) { pm_runtime_get_sync(&up->pdev->dev); serial_omap_enable_ier_thri(up); - if (pdata->set_noidle) + if (pdata && pdata->set_noidle) pdata->set_noidle(up->pdev); pm_runtime_mark_last_busy(&up->pdev->dev); pm_runtime_put_autosuspend(&up->pdev->dev); @@ -1613,7 +1613,7 @@ static int serial_omap_runtime_resume(struct device *dev) struct uart_omap_port *up = dev_get_drvdata(dev); struct omap_uart_port_info *pdata = dev->platform_data; - if (up) { + if (up && pdata) { if (pdata->get_context_loss_count) { u32 loss_cnt = pdata->get_context_loss_count(dev); diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index 17ae65762d1..e825460478b 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -29,6 +29,7 @@ #include <linux/nmi.h> #include <linux/delay.h> +#include <linux/debugfs.h> #include <linux/dmaengine.h> #include <linux/pch_dma.h> @@ -144,6 +145,8 @@ enum { #define PCH_UART_DLL 0x00 #define PCH_UART_DLM 0x01 +#define PCH_UART_BRCSR 0x0E + #define PCH_UART_IID_RLS (PCH_UART_IIR_REI) #define PCH_UART_IID_RDR (PCH_UART_IIR_RRI) #define PCH_UART_IID_RDR_TO (PCH_UART_IIR_RRI | PCH_UART_IIR_TOI) @@ -203,7 +206,10 @@ enum { #define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) -#define DEFAULT_BAUD_RATE 1843200 /* 1.8432MHz */ +#define DEFAULT_UARTCLK 1843200 /* 1.8432 MHz */ +#define CMITC_UARTCLK 192000000 /* 192.0000 MHz */ +#define FRI2_64_UARTCLK 64000000 /* 64.0000 MHz */ +#define FRI2_48_UARTCLK 48000000 /* 48.0000 MHz */ struct pch_uart_buffer { unsigned char *buf; @@ -218,7 +224,7 @@ struct eg20t_port { unsigned int iobase; struct pci_dev *pdev; int fifo_size; - int base_baud; + int uartclk; int start_tx; int start_rx; int tx_empty; @@ -243,6 +249,8 @@ struct eg20t_port { int tx_dma_use; void *rx_buf_virt; dma_addr_t rx_buf_dma; + + struct dentry *debugfs; }; /** @@ -287,26 +295,100 @@ static struct pch_uart_driver_data drv_dat[] = { static struct eg20t_port *pch_uart_ports[PCH_UART_NR]; #endif static unsigned int default_baud = 9600; +static unsigned int user_uartclk = 0; static const int trigger_level_256[4] = { 1, 64, 128, 224 }; static const int trigger_level_64[4] = { 1, 16, 32, 56 }; static const int trigger_level_16[4] = { 1, 4, 8, 14 }; static const int trigger_level_1[4] = { 1, 1, 1, 1 }; -static void pch_uart_hal_request(struct pci_dev *pdev, int fifosize, - int base_baud) +#ifdef CONFIG_DEBUG_FS + +#define PCH_REGS_BUFSIZE 1024 +static int pch_show_regs_open(struct inode *inode, struct file *file) { - struct eg20t_port *priv = pci_get_drvdata(pdev); + file->private_data = inode->i_private; + return 0; +} - priv->trigger_level = 1; - priv->fcr = 0; +static ssize_t port_show_regs(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct eg20t_port *priv = file->private_data; + char *buf; + u32 len = 0; + ssize_t ret; + unsigned char lcr; + + buf = kzalloc(PCH_REGS_BUFSIZE, GFP_KERNEL); + if (!buf) + return 0; + + len += snprintf(buf + len, PCH_REGS_BUFSIZE - len, + "PCH EG20T port[%d] regs:\n", priv->port.line); + + len += snprintf(buf + len, PCH_REGS_BUFSIZE - len, + "=================================\n"); + len += snprintf(buf + len, PCH_REGS_BUFSIZE - len, + "IER: \t0x%02x\n", ioread8(priv->membase + UART_IER)); + len += snprintf(buf + len, PCH_REGS_BUFSIZE - len, + "IIR: \t0x%02x\n", ioread8(priv->membase + UART_IIR)); + len += snprintf(buf + len, PCH_REGS_BUFSIZE - len, + "LCR: \t0x%02x\n", ioread8(priv->membase + UART_LCR)); + len += snprintf(buf + len, PCH_REGS_BUFSIZE - len, + "MCR: \t0x%02x\n", ioread8(priv->membase + UART_MCR)); + len += snprintf(buf + len, PCH_REGS_BUFSIZE - len, + "LSR: \t0x%02x\n", ioread8(priv->membase + UART_LSR)); + len += snprintf(buf + len, PCH_REGS_BUFSIZE - len, + "MSR: \t0x%02x\n", ioread8(priv->membase + UART_MSR)); + len += snprintf(buf + len, PCH_REGS_BUFSIZE - len, + "BRCSR: \t0x%02x\n", + ioread8(priv->membase + PCH_UART_BRCSR)); + + lcr = ioread8(priv->membase + UART_LCR); + iowrite8(PCH_UART_LCR_DLAB, priv->membase + UART_LCR); + len += snprintf(buf + len, PCH_REGS_BUFSIZE - len, + "DLL: \t0x%02x\n", ioread8(priv->membase + UART_DLL)); + len += snprintf(buf + len, PCH_REGS_BUFSIZE - len, + "DLM: \t0x%02x\n", ioread8(priv->membase + UART_DLM)); + iowrite8(lcr, priv->membase + UART_LCR); + + if (len > PCH_REGS_BUFSIZE) + len = PCH_REGS_BUFSIZE; + + ret = simple_read_from_buffer(user_buf, count, ppos, buf, len); + kfree(buf); + return ret; } -static unsigned int get_msr(struct eg20t_port *priv, void __iomem *base) +static const struct file_operations port_regs_ops = { + .owner = THIS_MODULE, + .open = pch_show_regs_open, + .read = port_show_regs, + .llseek = default_llseek, +}; +#endif /* CONFIG_DEBUG_FS */ + +/* Return UART clock, checking for board specific clocks. */ +static int pch_uart_get_uartclk(void) { - unsigned int msr = ioread8(base + UART_MSR); - priv->dmsr |= msr & PCH_UART_MSR_DELTA; + const char *cmp; + + if (user_uartclk) + return user_uartclk; + + cmp = dmi_get_system_info(DMI_BOARD_NAME); + if (cmp && strstr(cmp, "CM-iTC")) + return CMITC_UARTCLK; + + cmp = dmi_get_system_info(DMI_BIOS_VERSION); + if (cmp && strnstr(cmp, "FRI2", 4)) + return FRI2_64_UARTCLK; + + cmp = dmi_get_system_info(DMI_PRODUCT_NAME); + if (cmp && strstr(cmp, "Fish River Island II")) + return FRI2_48_UARTCLK; - return msr; + return DEFAULT_UARTCLK; } static void pch_uart_hal_enable_interrupt(struct eg20t_port *priv, @@ -332,7 +414,7 @@ static int pch_uart_hal_set_line(struct eg20t_port *priv, int baud, unsigned int dll, dlm, lcr; int div; - div = DIV_ROUND_CLOSEST(priv->base_baud / 16, baud); + div = DIV_ROUND_CLOSEST(priv->uartclk / 16, baud); if (div < 0 || USHRT_MAX <= div) { dev_err(priv->port.dev, "Invalid Baud(div=0x%x)\n", div); return -EINVAL; @@ -442,8 +524,9 @@ static int pch_uart_hal_set_fifo(struct eg20t_port *priv, static u8 pch_uart_hal_get_modem(struct eg20t_port *priv) { - priv->dmsr = 0; - return get_msr(priv, priv->membase); + unsigned int msr = ioread8(priv->membase + UART_MSR); + priv->dmsr = msr & PCH_UART_MSR_DELTA; + return (u8)msr; } static void pch_uart_hal_write(struct eg20t_port *priv, @@ -524,7 +607,7 @@ static int push_rx(struct eg20t_port *priv, const unsigned char *buf, static int pop_tx_x(struct eg20t_port *priv, unsigned char *buf) { - int ret; + int ret = 0; struct uart_port *port = &priv->port; if (port->x_char) { @@ -533,8 +616,6 @@ static int pop_tx_x(struct eg20t_port *priv, unsigned char *buf) buf[0] = port->x_char; port->x_char = 0; ret = 1; - } else { - ret = 0; } return ret; @@ -763,7 +844,7 @@ static int dma_handle_rx(struct eg20t_port *priv) sg_dma_address(sg) = priv->rx_buf_dma; - desc = priv->chan_rx->device->device_prep_slave_sg(priv->chan_rx, + desc = dmaengine_prep_slave_sg(priv->chan_rx, sg, 1, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); @@ -922,7 +1003,7 @@ static unsigned int dma_handle_tx(struct eg20t_port *priv) sg_dma_len(sg) = size; } - desc = priv->chan_tx->device->device_prep_slave_sg(priv->chan_tx, + desc = dmaengine_prep_slave_sg(priv->chan_tx, priv->sg_tx_p, nent, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc) { @@ -1032,14 +1113,12 @@ static irqreturn_t pch_uart_interrupt(int irq, void *dev_id) static unsigned int pch_uart_tx_empty(struct uart_port *port) { struct eg20t_port *priv; - int ret; + priv = container_of(port, struct eg20t_port, port); if (priv->tx_empty) - ret = TIOCSER_TEMT; + return TIOCSER_TEMT; else - ret = 0; - - return ret; + return 0; } /* Returns the current state of modem control inputs. */ @@ -1153,9 +1232,9 @@ static int pch_uart_startup(struct uart_port *port) priv->tx_empty = 1; if (port->uartclk) - priv->base_baud = port->uartclk; + priv->uartclk = port->uartclk; else - port->uartclk = priv->base_baud; + port->uartclk = priv->uartclk; pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT); ret = pch_uart_hal_set_line(priv, default_baud, @@ -1273,9 +1352,8 @@ static void pch_uart_set_termios(struct uart_port *port, else parity = PCH_UART_HAL_PARITY_EVEN; - } else { + } else parity = PCH_UART_HAL_PARITY_NONE; - } /* Only UART0 has auto hardware flow function */ if ((termios->c_cflag & CRTSCTS) && (priv->fifo_size == 256)) @@ -1447,7 +1525,6 @@ static void pch_console_write(struct console *co, const char *s, unsigned int count) { struct eg20t_port *priv; - unsigned long flags; u8 ier; int locked = 1; @@ -1489,7 +1566,7 @@ pch_console_write(struct console *co, const char *s, unsigned int count) static int __init pch_console_setup(struct console *co, char *options) { struct uart_port *port; - int baud = 9600; + int baud = default_baud; int bits = 8; int parity = 'n'; int flow = 'n'; @@ -1506,8 +1583,7 @@ static int __init pch_console_setup(struct console *co, char *options) if (!port || (!port->iobase && !port->membase)) return -ENODEV; - /* setup uartclock */ - port->uartclk = DEFAULT_BAUD_RATE; + port->uartclk = pch_uart_get_uartclk(); if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); @@ -1550,10 +1626,10 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev, unsigned int iobase; unsigned int mapbase; unsigned char *rxbuf; - int fifosize, base_baud; + int fifosize; int port_type; struct pch_uart_driver_data *board; - const char *board_name; + char name[32]; /* for debugfs file name */ board = &drv_dat[id->driver_data]; port_type = board->port_type; @@ -1566,13 +1642,6 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev, if (!rxbuf) goto init_port_free_txbuf; - base_baud = DEFAULT_BAUD_RATE; - - /* quirk for CM-iTC board */ - board_name = dmi_get_system_info(DMI_BOARD_NAME); - if (board_name && strstr(board_name, "CM-iTC")) - base_baud = 192000000; /* 192.0MHz */ - switch (port_type) { case PORT_UNKNOWN: fifosize = 256; /* EG20T/ML7213: UART0 */ @@ -1597,7 +1666,7 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev, priv->rxbuf.size = PAGE_SIZE; priv->fifo_size = fifosize; - priv->base_baud = base_baud; + priv->uartclk = pch_uart_get_uartclk(); priv->port_type = PORT_MAX_8250 + port_type + 1; priv->port.dev = &pdev->dev; priv->port.iobase = iobase; @@ -1614,7 +1683,8 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev, spin_lock_init(&priv->port.lock); pci_set_drvdata(pdev, priv); - pch_uart_hal_request(pdev, fifosize, base_baud); + priv->trigger_level = 1; + priv->fcr = 0; #ifdef CONFIG_SERIAL_PCH_UART_CONSOLE pch_uart_ports[board->line_no] = priv; @@ -1623,6 +1693,12 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev, if (ret < 0) goto init_port_hal_free; +#ifdef CONFIG_DEBUG_FS + snprintf(name, sizeof(name), "uart%d_regs", board->line_no); + priv->debugfs = debugfs_create_file(name, S_IFREG | S_IRUGO, + NULL, priv, &port_regs_ops); +#endif + return priv; init_port_hal_free: @@ -1639,6 +1715,11 @@ init_port_alloc_err: static void pch_uart_exit_port(struct eg20t_port *priv) { + +#ifdef CONFIG_DEBUG_FS + if (priv->debugfs) + debugfs_remove(priv->debugfs); +#endif uart_remove_one_port(&pch_uart_driver, &priv->port); pci_set_drvdata(priv->pdev, NULL); free_page((unsigned long)priv->rxbuf.buf); @@ -1646,9 +1727,7 @@ static void pch_uart_exit_port(struct eg20t_port *priv) static void pch_uart_pci_remove(struct pci_dev *pdev) { - struct eg20t_port *priv; - - priv = (struct eg20t_port *)pci_get_drvdata(pdev); + struct eg20t_port *priv = pci_get_drvdata(pdev); pci_disable_msi(pdev); @@ -1785,3 +1864,8 @@ module_exit(pch_uart_module_exit); MODULE_LICENSE("GPL v2"); MODULE_DESCRIPTION("Intel EG20T PCH UART PCI Driver"); module_param(default_baud, uint, S_IRUGO); +MODULE_PARM_DESC(default_baud, + "Default BAUD for initial driver state and console (default 9600)"); +module_param(user_uartclk, uint, S_IRUGO); +MODULE_PARM_DESC(user_uartclk, + "Override UART default or board specific UART clock"); diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c index e9c2dfe471a..08ebe901bb5 100644 --- a/drivers/tty/serial/pmac_zilog.c +++ b/drivers/tty/serial/pmac_zilog.c @@ -1506,7 +1506,7 @@ no_dma: * fixed up interrupt info, but we use the device-tree directly * here due to early probing so we need the fixup too. */ - if (uap->port.irq == NO_IRQ && + if (uap->port.irq == 0 && np->parent && np->parent->parent && of_device_is_compatible(np->parent->parent, "gatwick")) { /* IRQs on gatwick are offset by 64 */ diff --git a/drivers/tty/serial/pxa.c b/drivers/tty/serial/pxa.c index 5c8e3bba6c8..5847a4b855f 100644 --- a/drivers/tty/serial/pxa.c +++ b/drivers/tty/serial/pxa.c @@ -36,6 +36,7 @@ #include <linux/circ_buf.h> #include <linux/delay.h> #include <linux/interrupt.h> +#include <linux/of.h> #include <linux/platform_device.h> #include <linux/tty.h> #include <linux/tty_flip.h> @@ -44,6 +45,8 @@ #include <linux/io.h> #include <linux/slab.h> +#define PXA_NAME_LEN 8 + struct uart_pxa_port { struct uart_port port; unsigned char ier; @@ -51,7 +54,7 @@ struct uart_pxa_port { unsigned char mcr; unsigned int lsr_break_flag; struct clk *clk; - char *name; + char name[PXA_NAME_LEN]; }; static inline unsigned int serial_in(struct uart_pxa_port *up, int offset) @@ -579,9 +582,9 @@ serial_pxa_pm(struct uart_port *port, unsigned int state, struct uart_pxa_port *up = (struct uart_pxa_port *)port; if (!state) - clk_enable(up->clk); + clk_prepare_enable(up->clk); else - clk_disable(up->clk); + clk_disable_unprepare(up->clk); } static void serial_pxa_release_port(struct uart_port *port) @@ -668,7 +671,7 @@ serial_pxa_console_write(struct console *co, const char *s, unsigned int count) struct uart_pxa_port *up = serial_pxa_ports[co->index]; unsigned int ier; - clk_enable(up->clk); + clk_prepare_enable(up->clk); /* * First save the IER then disable the interrupts @@ -685,7 +688,7 @@ serial_pxa_console_write(struct console *co, const char *s, unsigned int count) wait_for_xmitr(up); serial_out(up, UART_IER, ier); - clk_disable(up->clk); + clk_disable_unprepare(up->clk); } static int __init @@ -781,6 +784,31 @@ static const struct dev_pm_ops serial_pxa_pm_ops = { }; #endif +static struct of_device_id serial_pxa_dt_ids[] = { + { .compatible = "mrvl,pxa-uart", }, + { .compatible = "mrvl,mmp-uart", }, + {} +}; +MODULE_DEVICE_TABLE(of, serial_pxa_dt_ids); + +static int serial_pxa_probe_dt(struct platform_device *pdev, + struct uart_pxa_port *sport) +{ + struct device_node *np = pdev->dev.of_node; + int ret; + + if (!np) + return 1; + + ret = of_alias_get_id(np, "serial"); + if (ret < 0) { + dev_err(&pdev->dev, "failed to get alias id, errno %d\n", ret); + return ret; + } + sport->port.line = ret; + return 0; +} + static int serial_pxa_probe(struct platform_device *dev) { struct uart_pxa_port *sport; @@ -808,20 +836,16 @@ static int serial_pxa_probe(struct platform_device *dev) sport->port.irq = irqres->start; sport->port.fifosize = 64; sport->port.ops = &serial_pxa_pops; - sport->port.line = dev->id; sport->port.dev = &dev->dev; sport->port.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF; sport->port.uartclk = clk_get_rate(sport->clk); - switch (dev->id) { - case 0: sport->name = "FFUART"; break; - case 1: sport->name = "BTUART"; break; - case 2: sport->name = "STUART"; break; - case 3: sport->name = "HWUART"; break; - default: - sport->name = "???"; - break; - } + ret = serial_pxa_probe_dt(dev, sport); + if (ret > 0) + sport->port.line = dev->id; + else if (ret < 0) + goto err_clk; + snprintf(sport->name, PXA_NAME_LEN - 1, "UART%d", sport->port.line + 1); sport->port.membase = ioremap(mmres->start, resource_size(mmres)); if (!sport->port.membase) { @@ -829,7 +853,7 @@ static int serial_pxa_probe(struct platform_device *dev) goto err_clk; } - serial_pxa_ports[dev->id] = sport; + serial_pxa_ports[sport->port.line] = sport; uart_add_one_port(&serial_pxa_reg, &sport->port); platform_set_drvdata(dev, sport); @@ -866,6 +890,7 @@ static struct platform_driver serial_pxa_driver = { #ifdef CONFIG_PM .pm = &serial_pxa_pm_ops, #endif + .of_match_table = serial_pxa_dt_ids, }, }; diff --git a/drivers/tty/serial/sa1100.c b/drivers/tty/serial/sa1100.c index ef7a21a6a01..2ca5959ec3f 100644 --- a/drivers/tty/serial/sa1100.c +++ b/drivers/tty/serial/sa1100.c @@ -38,6 +38,7 @@ #include <asm/irq.h> #include <mach/hardware.h> +#include <mach/irqs.h> #include <asm/mach/serial_sa1100.h> /* We've been assigned a range on the "Low-density serial ports" major */ diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index c55e5fb16fa..de249d265be 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -1507,7 +1507,7 @@ static struct s3c24xx_serial_drv_data s3c2412_serial_drv_data = { #endif #if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2416) || \ - defined(CONFIG_CPU_S3C2443) + defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2442) static struct s3c24xx_serial_drv_data s3c2440_serial_drv_data = { .info = &(struct s3c24xx_uart_info) { .name = "Samsung S3C2440 UART", diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 13056180adf..9c4c05b2825 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -2230,7 +2230,6 @@ int uart_register_driver(struct uart_driver *drv) drv->tty_driver = normal; - normal->owner = drv->owner; normal->driver_name = drv->driver_name; normal->name = drv->dev_name; normal->major = drv->major; diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 61b7fd2729c..bf461cf9961 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -1229,17 +1229,20 @@ static void sci_dma_tx_complete(void *arg) port->icount.tx += sg_dma_len(&s->sg_tx); async_tx_ack(s->desc_tx); - s->cookie_tx = -EINVAL; s->desc_tx = NULL; if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(port); if (!uart_circ_empty(xmit)) { + s->cookie_tx = 0; schedule_work(&s->work_tx); - } else if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { - u16 ctrl = sci_in(port, SCSCR); - sci_out(port, SCSCR, ctrl & ~SCSCR_TIE); + } else { + s->cookie_tx = -EINVAL; + if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { + u16 ctrl = sci_in(port, SCSCR); + sci_out(port, SCSCR, ctrl & ~SCSCR_TIE); + } } spin_unlock_irqrestore(&port->lock, flags); @@ -1338,7 +1341,7 @@ static void sci_submit_rx(struct sci_port *s) struct scatterlist *sg = &s->sg_rx[i]; struct dma_async_tx_descriptor *desc; - desc = chan->device->device_prep_slave_sg(chan, + desc = dmaengine_prep_slave_sg(chan, sg, 1, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT); if (desc) { @@ -1453,7 +1456,7 @@ static void work_fn_tx(struct work_struct *work) BUG_ON(!sg_dma_len(sg)); - desc = chan->device->device_prep_slave_sg(chan, + desc = dmaengine_prep_slave_sg(chan, sg, s->sg_len_tx, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc) { @@ -1501,8 +1504,10 @@ static void sci_start_tx(struct uart_port *port) } if (s->chan_tx && !uart_circ_empty(&s->port.state->xmit) && - s->cookie_tx < 0) + s->cookie_tx < 0) { + s->cookie_tx = 0; schedule_work(&s->work_tx); + } #endif if (!s->chan_tx || port->type == PORT_SCIFA || port->type == PORT_SCIFB) { diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c index a60523fee11..5b3eda2024f 100644 --- a/drivers/tty/serial/sirfsoc_uart.c +++ b/drivers/tty/serial/sirfsoc_uart.c @@ -22,7 +22,7 @@ #include <linux/io.h> #include <asm/irq.h> #include <asm/mach/irq.h> -#include <linux/pinctrl/pinmux.h> +#include <linux/pinctrl/consumer.h> #include "sirfsoc_uart.h" @@ -673,12 +673,10 @@ int sirfsoc_uart_probe(struct platform_device *pdev) port->irq = res->start; if (sirfport->hw_flow_ctrl) { - sirfport->pmx = pinmux_get(&pdev->dev, NULL); - ret = IS_ERR(sirfport->pmx); + sirfport->p = pinctrl_get_select_default(&pdev->dev); + ret = IS_ERR(sirfport->p); if (ret) - goto pmx_err; - - pinmux_enable(sirfport->pmx); + goto pin_err; } port->ops = &sirfsoc_uart_ops; @@ -695,11 +693,9 @@ int sirfsoc_uart_probe(struct platform_device *pdev) port_err: platform_set_drvdata(pdev, NULL); - if (sirfport->hw_flow_ctrl) { - pinmux_disable(sirfport->pmx); - pinmux_put(sirfport->pmx); - } -pmx_err: + if (sirfport->hw_flow_ctrl) + pinctrl_put(sirfport->p); +pin_err: irq_err: devm_iounmap(&pdev->dev, port->membase); err: @@ -711,10 +707,8 @@ static int sirfsoc_uart_remove(struct platform_device *pdev) struct sirfsoc_uart_port *sirfport = platform_get_drvdata(pdev); struct uart_port *port = &sirfport->port; platform_set_drvdata(pdev, NULL); - if (sirfport->hw_flow_ctrl) { - pinmux_disable(sirfport->pmx); - pinmux_put(sirfport->pmx); - } + if (sirfport->hw_flow_ctrl) + pinctrl_put(sirfport->p); devm_iounmap(&pdev->dev, port->membase); uart_remove_one_port(&sirfsoc_uart_drv, port); return 0; diff --git a/drivers/tty/serial/sirfsoc_uart.h b/drivers/tty/serial/sirfsoc_uart.h index fc64260fa93..6e207fdc2fe 100644 --- a/drivers/tty/serial/sirfsoc_uart.h +++ b/drivers/tty/serial/sirfsoc_uart.h @@ -162,7 +162,7 @@ struct sirfsoc_uart_port { unsigned char ms_enabled; struct uart_port port; - struct pinmux *pmx; + struct pinctrl *p; }; /* Hardware Flow Control */ diff --git a/drivers/tty/serial/sn_console.c b/drivers/tty/serial/sn_console.c index 238c7df73ef..1c6de9f5869 100644 --- a/drivers/tty/serial/sn_console.c +++ b/drivers/tty/serial/sn_console.c @@ -461,12 +461,12 @@ sn_receive_chars(struct sn_cons_port *port, unsigned long flags) struct tty_struct *tty; if (!port) { - printk(KERN_ERR "sn_receive_chars - port NULL so can't receieve\n"); + printk(KERN_ERR "sn_receive_chars - port NULL so can't receive\n"); return; } if (!port->sc_ops) { - printk(KERN_ERR "sn_receive_chars - port->sc_ops NULL so can't receieve\n"); + printk(KERN_ERR "sn_receive_chars - port->sc_ops NULL so can't receive\n"); return; } @@ -743,6 +743,7 @@ static void __init sn_sal_switch_to_interrupts(struct sn_cons_port *port) spin_lock_irqsave(&port->sc_port.lock, flags); port->sc_port.irq = SGI_UART_VECTOR; port->sc_ops = &intr_ops; + irq_set_handler(port->sc_port.irq, handle_level_irq); /* turn on receive interrupts */ ia64_sn_console_intr_enable(SAL_CONSOLE_INTR_RECV); diff --git a/drivers/tty/serial/suncore.c b/drivers/tty/serial/suncore.c index 6381a0282ee..6e4ac8db2d7 100644 --- a/drivers/tty/serial/suncore.c +++ b/drivers/tty/serial/suncore.c @@ -17,11 +17,11 @@ #include <linux/errno.h> #include <linux/string.h> #include <linux/serial_core.h> +#include <linux/sunserialcore.h> #include <linux/init.h> #include <asm/prom.h> -#include "suncore.h" static int sunserial_current_minor = 64; diff --git a/drivers/tty/serial/suncore.h b/drivers/tty/serial/suncore.h deleted file mode 100644 index db2057936c3..00000000000 --- a/drivers/tty/serial/suncore.h +++ /dev/null @@ -1,33 +0,0 @@ -/* suncore.h - * - * Generic SUN serial/kbd/ms layer. Based entirely - * upon drivers/sbus/char/sunserial.h which is: - * - * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be) - * - * Port to new UART layer is: - * - * Copyright (C) 2002 David S. Miller (davem@redhat.com) - */ - -#ifndef _SERIAL_SUN_H -#define _SERIAL_SUN_H - -/* Serial keyboard defines for L1-A processing... */ -#define SUNKBD_RESET 0xff -#define SUNKBD_L1 0x01 -#define SUNKBD_UP 0x80 -#define SUNKBD_A 0x4d - -extern unsigned int suncore_mouse_baud_cflag_next(unsigned int, int *); -extern int suncore_mouse_baud_detection(unsigned char, int); - -extern int sunserial_register_minors(struct uart_driver *, int); -extern void sunserial_unregister_minors(struct uart_driver *, int); - -extern int sunserial_console_match(struct console *, struct device_node *, - struct uart_driver *, int, bool); -extern void sunserial_console_termios(struct console *, - struct device_node *); - -#endif /* !(_SERIAL_SUN_H) */ diff --git a/drivers/tty/serial/sunhv.c b/drivers/tty/serial/sunhv.c index c0b7246d733..505961cfd93 100644 --- a/drivers/tty/serial/sunhv.c +++ b/drivers/tty/serial/sunhv.c @@ -23,14 +23,14 @@ #include <asm/spitfire.h> #include <asm/prom.h> #include <asm/irq.h> +#include <asm/setup.h> #if defined(CONFIG_MAGIC_SYSRQ) #define SUPPORT_SYSRQ #endif #include <linux/serial_core.h> - -#include "suncore.h" +#include <linux/sunserialcore.h> #define CON_BREAK ((long)-1) #define CON_HUP ((long)-2) diff --git a/drivers/tty/serial/sunsab.c b/drivers/tty/serial/sunsab.c index b5fa2a57b9d..f0d93eb7e6e 100644 --- a/drivers/tty/serial/sunsab.c +++ b/drivers/tty/serial/sunsab.c @@ -37,14 +37,15 @@ #include <asm/io.h> #include <asm/irq.h> #include <asm/prom.h> +#include <asm/setup.h> #if defined(CONFIG_SERIAL_SUNSAB_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) #define SUPPORT_SYSRQ #endif #include <linux/serial_core.h> +#include <linux/sunserialcore.h> -#include "suncore.h" #include "sunsab.h" struct uart_sunsab_port { diff --git a/drivers/tty/serial/sunsu.c b/drivers/tty/serial/sunsu.c index ad0f8f5f6ea..675303b8ed8 100644 --- a/drivers/tty/serial/sunsu.c +++ b/drivers/tty/serial/sunsu.c @@ -41,14 +41,14 @@ #include <asm/io.h> #include <asm/irq.h> #include <asm/prom.h> +#include <asm/setup.h> #if defined(CONFIG_SERIAL_SUNSU_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) #define SUPPORT_SYSRQ #endif #include <linux/serial_core.h> - -#include "suncore.h" +#include <linux/sunserialcore.h> /* We are on a NS PC87303 clocked with 24.0 MHz, which results * in a UART clock of 1.8462 MHz. diff --git a/drivers/tty/serial/sunzilog.c b/drivers/tty/serial/sunzilog.c index 8e916e76b7b..b3b70b0bf85 100644 --- a/drivers/tty/serial/sunzilog.c +++ b/drivers/tty/serial/sunzilog.c @@ -37,14 +37,15 @@ #include <asm/io.h> #include <asm/irq.h> #include <asm/prom.h> +#include <asm/setup.h> #if defined(CONFIG_SERIAL_SUNZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) #define SUPPORT_SYSRQ #endif #include <linux/serial_core.h> +#include <linux/sunserialcore.h> -#include "suncore.h" #include "sunzilog.h" /* On 32-bit sparcs we need to delay after register accesses @@ -1397,7 +1398,7 @@ static void __devinit sunzilog_init_hw(struct uart_sunzilog_port *up) #endif } -static int zilog_irq = -1; +static int zilog_irq; static int __devinit zs_probe(struct platform_device *op) { @@ -1425,7 +1426,7 @@ static int __devinit zs_probe(struct platform_device *op) rp = sunzilog_chip_regs[inst]; - if (zilog_irq == -1) + if (!zilog_irq) zilog_irq = op->archdata.irqs[0]; up = &sunzilog_port_table[inst * 2]; @@ -1580,7 +1581,7 @@ static int __init sunzilog_init(void) if (err) goto out_unregister_uart; - if (zilog_irq != -1) { + if (!zilog_irq) { struct uart_sunzilog_port *up = sunzilog_irq_chain; err = request_irq(zilog_irq, sunzilog_interrupt, IRQF_SHARED, "zs", sunzilog_irq_chain); @@ -1621,7 +1622,7 @@ static void __exit sunzilog_exit(void) { platform_driver_unregister(&zs_driver); - if (zilog_irq != -1) { + if (!zilog_irq) { struct uart_sunzilog_port *up = sunzilog_irq_chain; /* Disable Interrupts */ @@ -1637,7 +1638,7 @@ static void __exit sunzilog_exit(void) } free_irq(zilog_irq, sunzilog_irq_chain); - zilog_irq = -1; + zilog_irq = 0; } if (sunzilog_reg.nr) { diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c index 2ebe606a2db..f99b0c965f8 100644 --- a/drivers/tty/serial/ucc_uart.c +++ b/drivers/tty/serial/ucc_uart.c @@ -1360,7 +1360,7 @@ static int ucc_uart_probe(struct platform_device *ofdev) } qe_port->port.irq = irq_of_parse_and_map(np, 0); - if (qe_port->port.irq == NO_IRQ) { + if (qe_port->port.irq == 0) { dev_err(&ofdev->dev, "could not map IRQ for UCC%u\n", qe_port->ucc_num + 1); ret = -EINVAL; diff --git a/drivers/tty/serial/vr41xx_siu.c b/drivers/tty/serial/vr41xx_siu.c index 83148e79ca1..cf0d9485ec0 100644 --- a/drivers/tty/serial/vr41xx_siu.c +++ b/drivers/tty/serial/vr41xx_siu.c @@ -61,7 +61,7 @@ static struct uart_port siu_uart_ports[SIU_PORTS_MAX] = { [0 ... SIU_PORTS_MAX-1] = { .lock = __SPIN_LOCK_UNLOCKED(siu_uart_ports->lock), - .irq = -1, + .irq = 0, }, }; @@ -171,7 +171,7 @@ static inline unsigned int siu_check_type(struct uart_port *port) { if (port->line == 0) return PORT_VR41XX_SIU; - if (port->line == 1 && port->irq != -1) + if (port->line == 1 && port->irq) return PORT_VR41XX_DSIU; return PORT_UNKNOWN; diff --git a/drivers/tty/serial/vt8500_serial.c b/drivers/tty/serial/vt8500_serial.c index 026cb9ea5cd..2be006fb3da 100644 --- a/drivers/tty/serial/vt8500_serial.c +++ b/drivers/tty/serial/vt8500_serial.c @@ -544,7 +544,7 @@ static struct uart_driver vt8500_uart_driver = { .cons = VT8500_CONSOLE, }; -static int __init vt8500_serial_probe(struct platform_device *pdev) +static int __devinit vt8500_serial_probe(struct platform_device *pdev) { struct vt8500_port *vt8500_port; struct resource *mmres, *irqres; @@ -605,7 +605,7 @@ static int __devexit vt8500_serial_remove(struct platform_device *pdev) static struct platform_driver vt8500_platform_driver = { .probe = vt8500_serial_probe, - .remove = vt8500_serial_remove, + .remove = __devexit_p(vt8500_serial_remove), .driver = { .name = "vt8500_serial", .owner = THIS_MODULE, diff --git a/drivers/tty/serial/zs.c b/drivers/tty/serial/zs.c index b7455b52608..4001eee6c08 100644 --- a/drivers/tty/serial/zs.c +++ b/drivers/tty/serial/zs.c @@ -67,7 +67,6 @@ #include <linux/types.h> #include <linux/atomic.h> -#include <asm/system.h> #include <asm/dec/interrupts.h> #include <asm/dec/ioasic_addrs.h> diff --git a/drivers/tty/synclink.c b/drivers/tty/synclink.c index ff8017f8791..593d40ad0a6 100644 --- a/drivers/tty/synclink.c +++ b/drivers/tty/synclink.c @@ -86,7 +86,6 @@ #include <linux/ioctl.h> #include <linux/synclink.h> -#include <asm/system.h> #include <asm/io.h> #include <asm/irq.h> #include <asm/dma.h> @@ -3381,7 +3380,7 @@ static int mgsl_open(struct tty_struct *tty, struct file * filp) /* verify range of specified line number */ line = tty->index; - if ((line < 0) || (line >= mgsl_device_count)) { + if (line >= mgsl_device_count) { printk("%s(%d):mgsl_open with invalid line #%d.\n", __FILE__,__LINE__,line); return -ENODEV; @@ -4333,7 +4332,6 @@ static int mgsl_init_tty(void) if (!serial_driver) return -ENOMEM; - serial_driver->owner = THIS_MODULE; serial_driver->driver_name = "synclink"; serial_driver->name = "ttySL"; serial_driver->major = ttymajor; diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c index 18b48cd3b41..aa1debf97cc 100644 --- a/drivers/tty/synclink_gt.c +++ b/drivers/tty/synclink_gt.c @@ -73,7 +73,6 @@ #include <linux/hdlc.h> #include <linux/synclink.h> -#include <asm/system.h> #include <asm/io.h> #include <asm/irq.h> #include <asm/dma.h> @@ -654,7 +653,7 @@ static int open(struct tty_struct *tty, struct file *filp) unsigned long flags; line = tty->index; - if ((line < 0) || (line >= slgt_device_count)) { + if (line >= slgt_device_count) { DBGERR(("%s: open with invalid line #%d.\n", driver_name, line)); return -ENODEV; } @@ -3795,7 +3794,6 @@ static int __init slgt_init(void) /* Initialize the tty_driver structure */ - serial_driver->owner = THIS_MODULE; serial_driver->driver_name = tty_driver_name; serial_driver->name = tty_dev_prefix; serial_driver->major = ttymajor; @@ -3924,7 +3922,7 @@ static void tdma_reset(struct slgt_info *info) */ static void enable_loopback(struct slgt_info *info) { - /* SCR (serial control) BIT2=looopback enable */ + /* SCR (serial control) BIT2=loopback enable */ wr_reg16(info, SCR, (unsigned short)(rd_reg16(info, SCR) | BIT2)); if (info->params.mode != MGSL_MODE_ASYNC) { diff --git a/drivers/tty/synclinkmp.c b/drivers/tty/synclinkmp.c index a7efe538df0..a3dddc12d2f 100644 --- a/drivers/tty/synclinkmp.c +++ b/drivers/tty/synclinkmp.c @@ -58,7 +58,6 @@ #include <linux/delay.h> #include <linux/ioctl.h> -#include <asm/system.h> #include <asm/io.h> #include <asm/irq.h> #include <asm/dma.h> @@ -721,7 +720,7 @@ static int open(struct tty_struct *tty, struct file *filp) unsigned long flags; line = tty->index; - if ((line < 0) || (line >= synclinkmp_device_count)) { + if (line >= synclinkmp_device_count) { printk("%s(%d): open with invalid line #%d.\n", __FILE__,__LINE__,line); return -ENODEV; @@ -3977,7 +3976,6 @@ static int __init synclinkmp_init(void) /* Initialize the tty_driver structure */ - serial_driver->owner = THIS_MODULE; serial_driver->driver_name = "synclinkmp"; serial_driver->name = "ttySLM"; serial_driver->major = ttymajor; diff --git a/drivers/tty/sysrq.c b/drivers/tty/sysrq.c index 7867b7c4538..136e86faa1e 100644 --- a/drivers/tty/sysrq.c +++ b/drivers/tty/sysrq.c @@ -110,11 +110,9 @@ static struct sysrq_key_op sysrq_SAK_op = { #ifdef CONFIG_VT static void sysrq_handle_unraw(int key) { - struct kbd_struct *kbd = &kbd_table[fg_console]; - - if (kbd) - kbd->kbdmode = default_utf8 ? VC_UNICODE : VC_XLATE; + vt_reset_unicode(fg_console); } + static struct sysrq_key_op sysrq_unraw_op = { .handler = sysrq_handle_unraw, .help_msg = "unRaw", @@ -322,11 +320,16 @@ static void send_sig_all(int sig) { struct task_struct *p; + read_lock(&tasklist_lock); for_each_process(p) { - if (p->mm && !is_global_init(p)) - /* Not swapper, init nor kernel thread */ - force_sig(sig, p); + if (p->flags & PF_KTHREAD) + continue; + if (is_global_init(p)) + continue; + + force_sig(sig, p); } + read_unlock(&tasklist_lock); } static void sysrq_handle_term(int key) @@ -343,7 +346,7 @@ static struct sysrq_key_op sysrq_term_op = { static void moom_callback(struct work_struct *ignored) { - out_of_memory(node_zonelist(0, GFP_KERNEL), GFP_KERNEL, 0, NULL); + out_of_memory(node_zonelist(0, GFP_KERNEL), GFP_KERNEL, 0, NULL, true); } static DECLARE_WORK(moom_work, moom_callback); diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index e41b9bbc107..d939bd705c7 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -97,7 +97,6 @@ #include <linux/ratelimit.h> #include <linux/uaccess.h> -#include <asm/system.h> #include <linux/kbd_kern.h> #include <linux/vt_kern.h> @@ -1230,13 +1229,10 @@ static void tty_line_name(struct tty_driver *driver, int index, char *p) static struct tty_struct *tty_driver_lookup_tty(struct tty_driver *driver, struct inode *inode, int idx) { - struct tty_struct *tty; - if (driver->ops->lookup) return driver->ops->lookup(driver, inode, idx); - tty = driver->ttys[idx]; - return tty; + return driver->ttys[idx]; } /** @@ -1271,6 +1267,19 @@ int tty_init_termios(struct tty_struct *tty) } EXPORT_SYMBOL_GPL(tty_init_termios); +int tty_standard_install(struct tty_driver *driver, struct tty_struct *tty) +{ + int ret = tty_init_termios(tty); + if (ret) + return ret; + + tty_driver_kref_get(driver); + tty->count++; + driver->ttys[tty->index] = tty; + return 0; +} +EXPORT_SYMBOL_GPL(tty_standard_install); + /** * tty_driver_install_tty() - install a tty entry in the driver * @driver: the driver for the tty @@ -1286,21 +1295,8 @@ EXPORT_SYMBOL_GPL(tty_init_termios); static int tty_driver_install_tty(struct tty_driver *driver, struct tty_struct *tty) { - int idx = tty->index; - int ret; - - if (driver->ops->install) { - ret = driver->ops->install(driver, tty); - return ret; - } - - if (tty_init_termios(tty) == 0) { - tty_driver_kref_get(driver); - tty->count++; - driver->ttys[idx] = tty; - return 0; - } - return -ENOMEM; + return driver->ops->install ? driver->ops->install(driver, tty) : + tty_standard_install(driver, tty); } /** @@ -1351,7 +1347,6 @@ static int tty_reopen(struct tty_struct *tty) tty->link->count++; } tty->count++; - tty->driver = driver; /* N.B. why do this every time?? */ mutex_lock(&tty->ldisc_mutex); WARN_ON(!test_bit(TTY_LDISC, &tty->flags)); @@ -1365,7 +1360,6 @@ static int tty_reopen(struct tty_struct *tty) * @driver: tty driver we are opening a device on * @idx: device index * @ret_tty: returned tty structure - * @first_ok: ok to open a new device (used by ptmx) * * Prepare a tty device. This may not be a "new" clean device but * could also be an active device. The pty drivers require special @@ -1385,18 +1379,11 @@ static int tty_reopen(struct tty_struct *tty) * relaxed for the (most common) case of reopening a tty. */ -struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx, - int first_ok) +struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx) { struct tty_struct *tty; int retval; - /* Check if pty master is being opened multiple times */ - if (driver->subtype == PTY_TYPE_MASTER && - (driver->flags & TTY_DRIVER_DEVPTS_MEM) && !first_ok) { - return ERR_PTR(-EIO); - } - /* * First time open is complex, especially for PTY devices. * This code guarantees that either everything succeeds and the @@ -1950,7 +1937,7 @@ retry_open: if (retval) tty = ERR_PTR(retval); } else - tty = tty_init_dev(driver, index, 0); + tty = tty_init_dev(driver, index); mutex_unlock(&tty_mutex); if (driver) @@ -2941,7 +2928,6 @@ void initialize_tty_struct(struct tty_struct *tty, tty->session = NULL; tty->pgrp = NULL; tty->overrun_time = jiffies; - tty->buf.head = tty->buf.tail = NULL; tty_buffer_init(tty); mutex_init(&tty->termios_mutex); mutex_init(&tty->ldisc_mutex); @@ -3058,7 +3044,7 @@ void tty_unregister_device(struct tty_driver *driver, unsigned index) } EXPORT_SYMBOL(tty_unregister_device); -struct tty_driver *alloc_tty_driver(int lines) +struct tty_driver *__alloc_tty_driver(int lines, struct module *owner) { struct tty_driver *driver; @@ -3067,11 +3053,12 @@ struct tty_driver *alloc_tty_driver(int lines) kref_init(&driver->kref); driver->magic = TTY_DRIVER_MAGIC; driver->num = lines; + driver->owner = owner; /* later we'll move allocation of tables here */ } return driver; } -EXPORT_SYMBOL(alloc_tty_driver); +EXPORT_SYMBOL(__alloc_tty_driver); static void destruct_tty_driver(struct kref *kref) { diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c index 9314d93c1a2..a1b9a2f6856 100644 --- a/drivers/tty/tty_ioctl.c +++ b/drivers/tty/tty_ioctl.c @@ -23,7 +23,6 @@ #include <asm/io.h> #include <asm/uaccess.h> -#include <asm/system.h> #undef TTY_DEBUG_WAIT_UNTIL_SENT diff --git a/drivers/tty/vt/consolemap.c b/drivers/tty/vt/consolemap.c index a0f3d6c4d39..8308fc7cdc2 100644 --- a/drivers/tty/vt/consolemap.c +++ b/drivers/tty/vt/consolemap.c @@ -516,6 +516,7 @@ int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list) int err = 0, err1, i; struct uni_pagedir *p, *q; + /* Save original vc_unipagdir_loc in case we allocate a new one */ p = (struct uni_pagedir *)*vc->vc_uni_pagedir_loc; if (p->readonly) return -EIO; @@ -528,26 +529,57 @@ int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list) err1 = con_clear_unimap(vc, NULL); if (err1) return err1; + /* + * Since refcount was > 1, con_clear_unimap() allocated a + * a new uni_pagedir for this vc. Re: p != q + */ q = (struct uni_pagedir *)*vc->vc_uni_pagedir_loc; - for (i = 0, l = 0; i < 32; i++) + + /* + * uni_pgdir is a 32*32*64 table with rows allocated + * when its first entry is added. The unicode value must + * still be incremented for empty rows. We are copying + * entries from "p" (old) to "q" (new). + */ + l = 0; /* unicode value */ + for (i = 0; i < 32; i++) if ((p1 = p->uni_pgdir[i])) for (j = 0; j < 32; j++) - if ((p2 = p1[j])) + if ((p2 = p1[j])) { for (k = 0; k < 64; k++, l++) if (p2[k] != 0xffff) { + /* + * Found one, copy entry for unicode + * l with fontpos value p2[k]. + */ err1 = con_insert_unipair(q, l, p2[k]); if (err1) { p->refcount++; *vc->vc_uni_pagedir_loc = (unsigned long)p; con_release_unimap(q); kfree(q); - return err1; + return err1; } - } - p = q; - } else if (p == dflt) + } + } else { + /* Account for row of 64 empty entries */ + l += 64; + } + else + /* Account for empty table */ + l += 32 * 64; + + /* + * Finished copying font table, set vc_uni_pagedir to new table + */ + p = q; + } else if (p == dflt) { dflt = NULL; - + } + + /* + * Insert user specified unicode pairs into new table. + */ while (ct--) { unsigned short unicode, fontpos; __get_user(unicode, &list->unicode); @@ -557,11 +589,14 @@ int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list) list++; } + /* + * Merge with fontmaps of any other virtual consoles. + */ if (con_unify_unimap(vc, p)) return err; for (i = 0; i <= 3; i++) - set_inverse_transl(vc, p, i); /* Update all inverse translations */ + set_inverse_transl(vc, p, i); /* Update inverse translations */ set_inverse_trans_unicode(vc, p); return err; diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c index a605549ee28..86dd1e302bb 100644 --- a/drivers/tty/vt/keyboard.c +++ b/drivers/tty/vt/keyboard.c @@ -41,6 +41,7 @@ #include <linux/reboot.h> #include <linux/notifier.h> #include <linux/jiffies.h> +#include <linux/uaccess.h> #include <asm/irq_regs.h> @@ -55,8 +56,8 @@ extern void ctrl_alt_del(void); /* * Some laptops take the 789uiojklm,. keys as number pad when NumLock is on. * This seems a good reason to start with NumLock off. On HIL keyboards - * of PARISC machines however there is no NumLock key and everyone expects the keypad - * to be used for numbers. + * of PARISC machines however there is no NumLock key and everyone expects the + * keypad to be used for numbers. */ #if defined(CONFIG_PARISC) && (defined(CONFIG_KEYBOARD_HIL) || defined(CONFIG_KEYBOARD_HIL_OLD)) @@ -67,8 +68,6 @@ extern void ctrl_alt_del(void); #define KBD_DEFLOCK 0 -void compute_shiftstate(void); - /* * Handler Tables. */ @@ -99,35 +98,29 @@ static fn_handler_fn *fn_handler[] = { FN_HANDLERS }; * Variables exported for vt_ioctl.c */ -/* maximum values each key_handler can handle */ -const int max_vals[] = { - 255, ARRAY_SIZE(func_table) - 1, ARRAY_SIZE(fn_handler) - 1, NR_PAD - 1, - NR_DEAD - 1, 255, 3, NR_SHIFT - 1, 255, NR_ASCII - 1, NR_LOCK - 1, - 255, NR_LOCK - 1, 255, NR_BRL - 1 -}; - -const int NR_TYPES = ARRAY_SIZE(max_vals); - -struct kbd_struct kbd_table[MAX_NR_CONSOLES]; -EXPORT_SYMBOL_GPL(kbd_table); -static struct kbd_struct *kbd = kbd_table; - struct vt_spawn_console vt_spawn_con = { .lock = __SPIN_LOCK_UNLOCKED(vt_spawn_con.lock), .pid = NULL, .sig = 0, }; -/* - * Variables exported for vt.c - */ - -int shift_state = 0; /* * Internal Data. */ +static struct kbd_struct kbd_table[MAX_NR_CONSOLES]; +static struct kbd_struct *kbd = kbd_table; + +/* maximum values each key_handler can handle */ +static const int max_vals[] = { + 255, ARRAY_SIZE(func_table) - 1, ARRAY_SIZE(fn_handler) - 1, NR_PAD - 1, + NR_DEAD - 1, 255, 3, NR_SHIFT - 1, 255, NR_ASCII - 1, NR_LOCK - 1, + 255, NR_LOCK - 1, 255, NR_BRL - 1 +}; + +static const int NR_TYPES = ARRAY_SIZE(max_vals); + static struct input_handler kbd_handler; static DEFINE_SPINLOCK(kbd_event_lock); static unsigned long key_down[BITS_TO_LONGS(KEY_CNT)]; /* keyboard key bitmap */ @@ -137,6 +130,8 @@ static int npadch = -1; /* -1 or number assembled on pad */ static unsigned int diacr; static char rep; /* flag telling character repeat */ +static int shift_state = 0; + static unsigned char ledstate = 0xff; /* undefined */ static unsigned char ledioctl; @@ -187,7 +182,7 @@ static int getkeycode_helper(struct input_handle *handle, void *data) return d->error == 0; /* stop as soon as we successfully get one */ } -int getkeycode(unsigned int scancode) +static int getkeycode(unsigned int scancode) { struct getset_keycode_data d = { .ke = { @@ -214,7 +209,7 @@ static int setkeycode_helper(struct input_handle *handle, void *data) return d->error == 0; /* stop as soon as we successfully set one */ } -int setkeycode(unsigned int scancode, unsigned int keycode) +static int setkeycode(unsigned int scancode, unsigned int keycode) { struct getset_keycode_data d = { .ke = { @@ -382,9 +377,11 @@ static void to_utf8(struct vc_data *vc, uint c) /* * Called after returning from RAW mode or when changing consoles - recompute * shift_down[] and shift_state from key_down[] maybe called when keymap is - * undefined, so that shiftkey release is seen + * undefined, so that shiftkey release is seen. The caller must hold the + * kbd_event_lock. */ -void compute_shiftstate(void) + +static void do_compute_shiftstate(void) { unsigned int i, j, k, sym, val; @@ -417,6 +414,15 @@ void compute_shiftstate(void) } } +/* We still have to export this method to vt.c */ +void compute_shiftstate(void) +{ + unsigned long flags; + spin_lock_irqsave(&kbd_event_lock, flags); + do_compute_shiftstate(); + spin_unlock_irqrestore(&kbd_event_lock, flags); +} + /* * We have a combining character DIACR here, followed by the character CH. * If the combination occurs in the table, return the corresponding value. @@ -636,7 +642,7 @@ static void fn_SAK(struct vc_data *vc) static void fn_null(struct vc_data *vc) { - compute_shiftstate(); + do_compute_shiftstate(); } /* @@ -989,6 +995,8 @@ unsigned char getledstate(void) void setledstate(struct kbd_struct *kbd, unsigned int led) { + unsigned long flags; + spin_lock_irqsave(&kbd_event_lock, flags); if (!(led & ~7)) { ledioctl = led; kbd->ledmode = LED_SHOW_IOCTL; @@ -996,6 +1004,7 @@ void setledstate(struct kbd_struct *kbd, unsigned int led) kbd->ledmode = LED_SHOW_FLAGS; set_leds(); + spin_unlock_irqrestore(&kbd_event_lock, flags); } static inline unsigned char getleds(void) @@ -1035,6 +1044,75 @@ static int kbd_update_leds_helper(struct input_handle *handle, void *data) return 0; } +/** + * vt_get_leds - helper for braille console + * @console: console to read + * @flag: flag we want to check + * + * Check the status of a keyboard led flag and report it back + */ +int vt_get_leds(int console, int flag) +{ + unsigned long flags; + struct kbd_struct * kbd = kbd_table + console; + int ret; + + spin_lock_irqsave(&kbd_event_lock, flags); + ret = vc_kbd_led(kbd, flag); + spin_unlock_irqrestore(&kbd_event_lock, flags); + + return ret; +} +EXPORT_SYMBOL_GPL(vt_get_leds); + +/** + * vt_set_led_state - set LED state of a console + * @console: console to set + * @leds: LED bits + * + * Set the LEDs on a console. This is a wrapper for the VT layer + * so that we can keep kbd knowledge internal + */ +void vt_set_led_state(int console, int leds) +{ + struct kbd_struct * kbd = kbd_table + console; + setledstate(kbd, leds); +} + +/** + * vt_kbd_con_start - Keyboard side of console start + * @console: console + * + * Handle console start. This is a wrapper for the VT layer + * so that we can keep kbd knowledge internal + */ +void vt_kbd_con_start(int console) +{ + struct kbd_struct * kbd = kbd_table + console; + unsigned long flags; + spin_lock_irqsave(&kbd_event_lock, flags); + clr_vc_kbd_led(kbd, VC_SCROLLOCK); + set_leds(); + spin_unlock_irqrestore(&kbd_event_lock, flags); +} + +/** + * vt_kbd_con_stop - Keyboard side of console stop + * @console: console + * + * Handle console stop. This is a wrapper for the VT layer + * so that we can keep kbd knowledge internal + */ +void vt_kbd_con_stop(int console) +{ + struct kbd_struct * kbd = kbd_table + console; + unsigned long flags; + spin_lock_irqsave(&kbd_event_lock, flags); + set_vc_kbd_led(kbd, VC_SCROLLOCK); + set_leds(); + spin_unlock_irqrestore(&kbd_event_lock, flags); +} + /* * This is the tasklet that updates LED state on all keyboards * attached to the box. The reason we use tasklet is that we @@ -1254,7 +1332,7 @@ static void kbd_keycode(unsigned int keycode, int down, int hw_raw) if (rc == NOTIFY_STOP || !key_map) { atomic_notifier_call_chain(&keyboard_notifier_list, KBD_UNBOUND_KEYCODE, ¶m); - compute_shiftstate(); + do_compute_shiftstate(); kbd->slockstate = 0; return; } @@ -1404,14 +1482,14 @@ static void kbd_start(struct input_handle *handle) static const struct input_device_id kbd_ids[] = { { - .flags = INPUT_DEVICE_ID_MATCH_EVBIT, - .evbit = { BIT_MASK(EV_KEY) }, - }, + .flags = INPUT_DEVICE_ID_MATCH_EVBIT, + .evbit = { BIT_MASK(EV_KEY) }, + }, { - .flags = INPUT_DEVICE_ID_MATCH_EVBIT, - .evbit = { BIT_MASK(EV_SND) }, - }, + .flags = INPUT_DEVICE_ID_MATCH_EVBIT, + .evbit = { BIT_MASK(EV_SND) }, + }, { }, /* Terminating entry */ }; @@ -1433,7 +1511,7 @@ int __init kbd_init(void) int i; int error; - for (i = 0; i < MAX_NR_CONSOLES; i++) { + for (i = 0; i < MAX_NR_CONSOLES; i++) { kbd_table[i].ledflagstate = KBD_DEFLEDS; kbd_table[i].default_ledflagstate = KBD_DEFLEDS; kbd_table[i].ledmode = LED_SHOW_FLAGS; @@ -1452,3 +1530,658 @@ int __init kbd_init(void) return 0; } + +/* Ioctl support code */ + +/** + * vt_do_diacrit - diacritical table updates + * @cmd: ioctl request + * @up: pointer to user data for ioctl + * @perm: permissions check computed by caller + * + * Update the diacritical tables atomically and safely. Lock them + * against simultaneous keypresses + */ +int vt_do_diacrit(unsigned int cmd, void __user *up, int perm) +{ + struct kbdiacrs __user *a = up; + unsigned long flags; + int asize; + int ret = 0; + + switch (cmd) { + case KDGKBDIACR: + { + struct kbdiacr *diacr; + int i; + + diacr = kmalloc(MAX_DIACR * sizeof(struct kbdiacr), + GFP_KERNEL); + if (diacr == NULL) + return -ENOMEM; + + /* Lock the diacriticals table, make a copy and then + copy it after we unlock */ + spin_lock_irqsave(&kbd_event_lock, flags); + + asize = accent_table_size; + for (i = 0; i < asize; i++) { + diacr[i].diacr = conv_uni_to_8bit( + accent_table[i].diacr); + diacr[i].base = conv_uni_to_8bit( + accent_table[i].base); + diacr[i].result = conv_uni_to_8bit( + accent_table[i].result); + } + spin_unlock_irqrestore(&kbd_event_lock, flags); + + if (put_user(asize, &a->kb_cnt)) + ret = -EFAULT; + else if (copy_to_user(a->kbdiacr, diacr, + asize * sizeof(struct kbdiacr))) + ret = -EFAULT; + kfree(diacr); + return ret; + } + case KDGKBDIACRUC: + { + struct kbdiacrsuc __user *a = up; + void *buf; + + buf = kmalloc(MAX_DIACR * sizeof(struct kbdiacruc), + GFP_KERNEL); + if (buf == NULL) + return -ENOMEM; + + /* Lock the diacriticals table, make a copy and then + copy it after we unlock */ + spin_lock_irqsave(&kbd_event_lock, flags); + + asize = accent_table_size; + memcpy(buf, accent_table, asize * sizeof(struct kbdiacruc)); + + spin_unlock_irqrestore(&kbd_event_lock, flags); + + if (put_user(asize, &a->kb_cnt)) + ret = -EFAULT; + else if (copy_to_user(a->kbdiacruc, buf, + asize*sizeof(struct kbdiacruc))) + ret = -EFAULT; + kfree(buf); + return ret; + } + + case KDSKBDIACR: + { + struct kbdiacrs __user *a = up; + struct kbdiacr *diacr = NULL; + unsigned int ct; + int i; + + if (!perm) + return -EPERM; + if (get_user(ct, &a->kb_cnt)) + return -EFAULT; + if (ct >= MAX_DIACR) + return -EINVAL; + + if (ct) { + diacr = kmalloc(sizeof(struct kbdiacr) * ct, + GFP_KERNEL); + if (diacr == NULL) + return -ENOMEM; + + if (copy_from_user(diacr, a->kbdiacr, + sizeof(struct kbdiacr) * ct)) { + kfree(diacr); + return -EFAULT; + } + } + + spin_lock_irqsave(&kbd_event_lock, flags); + accent_table_size = ct; + for (i = 0; i < ct; i++) { + accent_table[i].diacr = + conv_8bit_to_uni(diacr[i].diacr); + accent_table[i].base = + conv_8bit_to_uni(diacr[i].base); + accent_table[i].result = + conv_8bit_to_uni(diacr[i].result); + } + spin_unlock_irqrestore(&kbd_event_lock, flags); + kfree(diacr); + return 0; + } + + case KDSKBDIACRUC: + { + struct kbdiacrsuc __user *a = up; + unsigned int ct; + void *buf = NULL; + + if (!perm) + return -EPERM; + + if (get_user(ct, &a->kb_cnt)) + return -EFAULT; + + if (ct >= MAX_DIACR) + return -EINVAL; + + if (ct) { + buf = kmalloc(ct * sizeof(struct kbdiacruc), + GFP_KERNEL); + if (buf == NULL) + return -ENOMEM; + + if (copy_from_user(buf, a->kbdiacruc, + ct * sizeof(struct kbdiacruc))) { + kfree(buf); + return -EFAULT; + } + } + spin_lock_irqsave(&kbd_event_lock, flags); + if (ct) + memcpy(accent_table, buf, + ct * sizeof(struct kbdiacruc)); + accent_table_size = ct; + spin_unlock_irqrestore(&kbd_event_lock, flags); + kfree(buf); + return 0; + } + } + return ret; +} + +/** + * vt_do_kdskbmode - set keyboard mode ioctl + * @console: the console to use + * @arg: the requested mode + * + * Update the keyboard mode bits while holding the correct locks. + * Return 0 for success or an error code. + */ +int vt_do_kdskbmode(int console, unsigned int arg) +{ + struct kbd_struct * kbd = kbd_table + console; + int ret = 0; + unsigned long flags; + + spin_lock_irqsave(&kbd_event_lock, flags); + switch(arg) { + case K_RAW: + kbd->kbdmode = VC_RAW; + break; + case K_MEDIUMRAW: + kbd->kbdmode = VC_MEDIUMRAW; + break; + case K_XLATE: + kbd->kbdmode = VC_XLATE; + do_compute_shiftstate(); + break; + case K_UNICODE: + kbd->kbdmode = VC_UNICODE; + do_compute_shiftstate(); + break; + case K_OFF: + kbd->kbdmode = VC_OFF; + break; + default: + ret = -EINVAL; + } + spin_unlock_irqrestore(&kbd_event_lock, flags); + return ret; +} + +/** + * vt_do_kdskbmeta - set keyboard meta state + * @console: the console to use + * @arg: the requested meta state + * + * Update the keyboard meta bits while holding the correct locks. + * Return 0 for success or an error code. + */ +int vt_do_kdskbmeta(int console, unsigned int arg) +{ + struct kbd_struct * kbd = kbd_table + console; + int ret = 0; + unsigned long flags; + + spin_lock_irqsave(&kbd_event_lock, flags); + switch(arg) { + case K_METABIT: + clr_vc_kbd_mode(kbd, VC_META); + break; + case K_ESCPREFIX: + set_vc_kbd_mode(kbd, VC_META); + break; + default: + ret = -EINVAL; + } + spin_unlock_irqrestore(&kbd_event_lock, flags); + return ret; +} + +int vt_do_kbkeycode_ioctl(int cmd, struct kbkeycode __user *user_kbkc, + int perm) +{ + struct kbkeycode tmp; + int kc = 0; + + if (copy_from_user(&tmp, user_kbkc, sizeof(struct kbkeycode))) + return -EFAULT; + switch (cmd) { + case KDGETKEYCODE: + kc = getkeycode(tmp.scancode); + if (kc >= 0) + kc = put_user(kc, &user_kbkc->keycode); + break; + case KDSETKEYCODE: + if (!perm) + return -EPERM; + kc = setkeycode(tmp.scancode, tmp.keycode); + break; + } + return kc; +} + +#define i (tmp.kb_index) +#define s (tmp.kb_table) +#define v (tmp.kb_value) + +int vt_do_kdsk_ioctl(int cmd, struct kbentry __user *user_kbe, int perm, + int console) +{ + struct kbd_struct * kbd = kbd_table + console; + struct kbentry tmp; + ushort *key_map, *new_map, val, ov; + unsigned long flags; + + if (copy_from_user(&tmp, user_kbe, sizeof(struct kbentry))) + return -EFAULT; + + if (!capable(CAP_SYS_TTY_CONFIG)) + perm = 0; + + switch (cmd) { + case KDGKBENT: + /* Ensure another thread doesn't free it under us */ + spin_lock_irqsave(&kbd_event_lock, flags); + key_map = key_maps[s]; + if (key_map) { + val = U(key_map[i]); + if (kbd->kbdmode != VC_UNICODE && KTYP(val) >= NR_TYPES) + val = K_HOLE; + } else + val = (i ? K_HOLE : K_NOSUCHMAP); + spin_unlock_irqrestore(&kbd_event_lock, flags); + return put_user(val, &user_kbe->kb_value); + case KDSKBENT: + if (!perm) + return -EPERM; + if (!i && v == K_NOSUCHMAP) { + spin_lock_irqsave(&kbd_event_lock, flags); + /* deallocate map */ + key_map = key_maps[s]; + if (s && key_map) { + key_maps[s] = NULL; + if (key_map[0] == U(K_ALLOCATED)) { + kfree(key_map); + keymap_count--; + } + } + spin_unlock_irqrestore(&kbd_event_lock, flags); + break; + } + + if (KTYP(v) < NR_TYPES) { + if (KVAL(v) > max_vals[KTYP(v)]) + return -EINVAL; + } else + if (kbd->kbdmode != VC_UNICODE) + return -EINVAL; + + /* ++Geert: non-PC keyboards may generate keycode zero */ +#if !defined(__mc68000__) && !defined(__powerpc__) + /* assignment to entry 0 only tests validity of args */ + if (!i) + break; +#endif + + new_map = kmalloc(sizeof(plain_map), GFP_KERNEL); + if (!new_map) + return -ENOMEM; + spin_lock_irqsave(&kbd_event_lock, flags); + key_map = key_maps[s]; + if (key_map == NULL) { + int j; + + if (keymap_count >= MAX_NR_OF_USER_KEYMAPS && + !capable(CAP_SYS_RESOURCE)) { + spin_unlock_irqrestore(&kbd_event_lock, flags); + kfree(new_map); + return -EPERM; + } + key_maps[s] = new_map; + key_map = new_map; + key_map[0] = U(K_ALLOCATED); + for (j = 1; j < NR_KEYS; j++) + key_map[j] = U(K_HOLE); + keymap_count++; + } else + kfree(new_map); + + ov = U(key_map[i]); + if (v == ov) + goto out; + /* + * Attention Key. + */ + if (((ov == K_SAK) || (v == K_SAK)) && !capable(CAP_SYS_ADMIN)) { + spin_unlock_irqrestore(&kbd_event_lock, flags); + return -EPERM; + } + key_map[i] = U(v); + if (!s && (KTYP(ov) == KT_SHIFT || KTYP(v) == KT_SHIFT)) + do_compute_shiftstate(); +out: + spin_unlock_irqrestore(&kbd_event_lock, flags); + break; + } + return 0; +} +#undef i +#undef s +#undef v + +/* FIXME: This one needs untangling and locking */ +int vt_do_kdgkb_ioctl(int cmd, struct kbsentry __user *user_kdgkb, int perm) +{ + struct kbsentry *kbs; + char *p; + u_char *q; + u_char __user *up; + int sz; + int delta; + char *first_free, *fj, *fnw; + int i, j, k; + int ret; + + if (!capable(CAP_SYS_TTY_CONFIG)) + perm = 0; + + kbs = kmalloc(sizeof(*kbs), GFP_KERNEL); + if (!kbs) { + ret = -ENOMEM; + goto reterr; + } + + /* we mostly copy too much here (512bytes), but who cares ;) */ + if (copy_from_user(kbs, user_kdgkb, sizeof(struct kbsentry))) { + ret = -EFAULT; + goto reterr; + } + kbs->kb_string[sizeof(kbs->kb_string)-1] = '\0'; + i = kbs->kb_func; + + switch (cmd) { + case KDGKBSENT: + sz = sizeof(kbs->kb_string) - 1; /* sz should have been + a struct member */ + up = user_kdgkb->kb_string; + p = func_table[i]; + if(p) + for ( ; *p && sz; p++, sz--) + if (put_user(*p, up++)) { + ret = -EFAULT; + goto reterr; + } + if (put_user('\0', up)) { + ret = -EFAULT; + goto reterr; + } + kfree(kbs); + return ((p && *p) ? -EOVERFLOW : 0); + case KDSKBSENT: + if (!perm) { + ret = -EPERM; + goto reterr; + } + + q = func_table[i]; + first_free = funcbufptr + (funcbufsize - funcbufleft); + for (j = i+1; j < MAX_NR_FUNC && !func_table[j]; j++) + ; + if (j < MAX_NR_FUNC) + fj = func_table[j]; + else + fj = first_free; + + delta = (q ? -strlen(q) : 1) + strlen(kbs->kb_string); + if (delta <= funcbufleft) { /* it fits in current buf */ + if (j < MAX_NR_FUNC) { + memmove(fj + delta, fj, first_free - fj); + for (k = j; k < MAX_NR_FUNC; k++) + if (func_table[k]) + func_table[k] += delta; + } + if (!q) + func_table[i] = fj; + funcbufleft -= delta; + } else { /* allocate a larger buffer */ + sz = 256; + while (sz < funcbufsize - funcbufleft + delta) + sz <<= 1; + fnw = kmalloc(sz, GFP_KERNEL); + if(!fnw) { + ret = -ENOMEM; + goto reterr; + } + + if (!q) + func_table[i] = fj; + if (fj > funcbufptr) + memmove(fnw, funcbufptr, fj - funcbufptr); + for (k = 0; k < j; k++) + if (func_table[k]) + func_table[k] = fnw + (func_table[k] - funcbufptr); + + if (first_free > fj) { + memmove(fnw + (fj - funcbufptr) + delta, fj, first_free - fj); + for (k = j; k < MAX_NR_FUNC; k++) + if (func_table[k]) + func_table[k] = fnw + (func_table[k] - funcbufptr) + delta; + } + if (funcbufptr != func_buf) + kfree(funcbufptr); + funcbufptr = fnw; + funcbufleft = funcbufleft - delta + sz - funcbufsize; + funcbufsize = sz; + } + strcpy(func_table[i], kbs->kb_string); + break; + } + ret = 0; +reterr: + kfree(kbs); + return ret; +} + +int vt_do_kdskled(int console, int cmd, unsigned long arg, int perm) +{ + struct kbd_struct * kbd = kbd_table + console; + unsigned long flags; + unsigned char ucval; + + switch(cmd) { + /* the ioctls below read/set the flags usually shown in the leds */ + /* don't use them - they will go away without warning */ + case KDGKBLED: + spin_lock_irqsave(&kbd_event_lock, flags); + ucval = kbd->ledflagstate | (kbd->default_ledflagstate << 4); + spin_unlock_irqrestore(&kbd_event_lock, flags); + return put_user(ucval, (char __user *)arg); + + case KDSKBLED: + if (!perm) + return -EPERM; + if (arg & ~0x77) + return -EINVAL; + spin_lock_irqsave(&kbd_event_lock, flags); + kbd->ledflagstate = (arg & 7); + kbd->default_ledflagstate = ((arg >> 4) & 7); + set_leds(); + spin_unlock_irqrestore(&kbd_event_lock, flags); + break; + + /* the ioctls below only set the lights, not the functions */ + /* for those, see KDGKBLED and KDSKBLED above */ + case KDGETLED: + ucval = getledstate(); + return put_user(ucval, (char __user *)arg); + + case KDSETLED: + if (!perm) + return -EPERM; + setledstate(kbd, arg); + return 0; + } + return -ENOIOCTLCMD; +} + +int vt_do_kdgkbmode(int console) +{ + struct kbd_struct * kbd = kbd_table + console; + /* This is a spot read so needs no locking */ + switch (kbd->kbdmode) { + case VC_RAW: + return K_RAW; + case VC_MEDIUMRAW: + return K_MEDIUMRAW; + case VC_UNICODE: + return K_UNICODE; + case VC_OFF: + return K_OFF; + default: + return K_XLATE; + } +} + +/** + * vt_do_kdgkbmeta - report meta status + * @console: console to report + * + * Report the meta flag status of this console + */ +int vt_do_kdgkbmeta(int console) +{ + struct kbd_struct * kbd = kbd_table + console; + /* Again a spot read so no locking */ + return vc_kbd_mode(kbd, VC_META) ? K_ESCPREFIX : K_METABIT; +} + +/** + * vt_reset_unicode - reset the unicode status + * @console: console being reset + * + * Restore the unicode console state to its default + */ +void vt_reset_unicode(int console) +{ + unsigned long flags; + + spin_lock_irqsave(&kbd_event_lock, flags); + kbd_table[console].kbdmode = default_utf8 ? VC_UNICODE : VC_XLATE; + spin_unlock_irqrestore(&kbd_event_lock, flags); +} + +/** + * vt_get_shiftstate - shift bit state + * + * Report the shift bits from the keyboard state. We have to export + * this to support some oddities in the vt layer. + */ +int vt_get_shift_state(void) +{ + /* Don't lock as this is a transient report */ + return shift_state; +} + +/** + * vt_reset_keyboard - reset keyboard state + * @console: console to reset + * + * Reset the keyboard bits for a console as part of a general console + * reset event + */ +void vt_reset_keyboard(int console) +{ + struct kbd_struct * kbd = kbd_table + console; + unsigned long flags; + + spin_lock_irqsave(&kbd_event_lock, flags); + set_vc_kbd_mode(kbd, VC_REPEAT); + clr_vc_kbd_mode(kbd, VC_CKMODE); + clr_vc_kbd_mode(kbd, VC_APPLIC); + clr_vc_kbd_mode(kbd, VC_CRLF); + kbd->lockstate = 0; + kbd->slockstate = 0; + kbd->ledmode = LED_SHOW_FLAGS; + kbd->ledflagstate = kbd->default_ledflagstate; + /* do not do set_leds here because this causes an endless tasklet loop + when the keyboard hasn't been initialized yet */ + spin_unlock_irqrestore(&kbd_event_lock, flags); +} + +/** + * vt_get_kbd_mode_bit - read keyboard status bits + * @console: console to read from + * @bit: mode bit to read + * + * Report back a vt mode bit. We do this without locking so the + * caller must be sure that there are no synchronization needs + */ + +int vt_get_kbd_mode_bit(int console, int bit) +{ + struct kbd_struct * kbd = kbd_table + console; + return vc_kbd_mode(kbd, bit); +} + +/** + * vt_set_kbd_mode_bit - read keyboard status bits + * @console: console to read from + * @bit: mode bit to read + * + * Set a vt mode bit. We do this without locking so the + * caller must be sure that there are no synchronization needs + */ + +void vt_set_kbd_mode_bit(int console, int bit) +{ + struct kbd_struct * kbd = kbd_table + console; + unsigned long flags; + + spin_lock_irqsave(&kbd_event_lock, flags); + set_vc_kbd_mode(kbd, bit); + spin_unlock_irqrestore(&kbd_event_lock, flags); +} + +/** + * vt_clr_kbd_mode_bit - read keyboard status bits + * @console: console to read from + * @bit: mode bit to read + * + * Report back a vt mode bit. We do this without locking so the + * caller must be sure that there are no synchronization needs + */ + +void vt_clr_kbd_mode_bit(int console, int bit) +{ + struct kbd_struct * kbd = kbd_table + console; + unsigned long flags; + + spin_lock_irqsave(&kbd_event_lock, flags); + clr_vc_kbd_mode(kbd, bit); + spin_unlock_irqrestore(&kbd_event_lock, flags); +} diff --git a/drivers/tty/vt/selection.c b/drivers/tty/vt/selection.c index 7a0a12ae545..8e9b4be97a2 100644 --- a/drivers/tty/vt/selection.c +++ b/drivers/tty/vt/selection.c @@ -30,6 +30,7 @@ extern void poke_blanked_console(void); +/* FIXME: all this needs locking */ /* Variables for selection control. */ /* Use a dynamic buffer, instead of static (Dec 1994) */ struct vc_data *sel_cons; /* must not be deallocated */ @@ -61,10 +62,14 @@ sel_pos(int n) use_unicode); } -/* remove the current selection highlight, if any, - from the console holding the selection. */ -void -clear_selection(void) { +/** + * clear_selection - remove current selection + * + * Remove the current selection highlight, if any from the console + * holding the selection. The caller must hold the console lock. + */ +void clear_selection(void) +{ highlight_pointer(-1); /* hide the pointer */ if (sel_start != -1) { highlight(sel_start, sel_end); @@ -74,7 +79,7 @@ clear_selection(void) { /* * User settable table: what characters are to be considered alphabetic? - * 256 bits + * 256 bits. Locked by the console lock. */ static u32 inwordLut[8]={ 0x00000000, /* control chars */ @@ -91,10 +96,20 @@ static inline int inword(const u16 c) { return c > 0xff || (( inwordLut[c>>5] >> (c & 0x1F) ) & 1); } -/* set inwordLut contents. Invoked by ioctl(). */ +/** + * set loadlut - load the LUT table + * @p: user table + * + * Load the LUT table from user space. The caller must hold the console + * lock. Make a temporary copy so a partial update doesn't make a mess. + */ int sel_loadlut(char __user *p) { - return copy_from_user(inwordLut, (u32 __user *)(p+4), 32) ? -EFAULT : 0; + u32 tmplut[8]; + if (copy_from_user(tmplut, (u32 __user *)(p+4), 32)) + return -EFAULT; + memcpy(inwordLut, tmplut, 32); + return 0; } /* does screen address p correspond to character at LH/RH edge of screen? */ @@ -130,7 +145,16 @@ static int store_utf8(u16 c, char *p) } } -/* set the current selection. Invoked by ioctl() or by kernel code. */ +/** + * set_selection - set the current selection. + * @sel: user selection info + * @tty: the console tty + * + * Invoked by the ioctl handle for the vt layer. + * + * The entire selection process is managed under the console_lock. It's + * a lot under the lock but its hardly a performance path + */ int set_selection(const struct tiocl_selection __user *sel, struct tty_struct *tty) { struct vc_data *vc = vc_cons[fg_console].d; @@ -138,7 +162,7 @@ int set_selection(const struct tiocl_selection __user *sel, struct tty_struct *t char *bp, *obp; int i, ps, pe, multiplier; u16 c; - struct kbd_struct *kbd = kbd_table + fg_console; + int mode; poke_blanked_console(); @@ -182,7 +206,11 @@ int set_selection(const struct tiocl_selection __user *sel, struct tty_struct *t clear_selection(); sel_cons = vc_cons[fg_console].d; } - use_unicode = kbd && kbd->kbdmode == VC_UNICODE; + mode = vt_do_kdgkbmode(fg_console); + if (mode == K_UNICODE) + use_unicode = 1; + else + use_unicode = 0; switch (sel_mode) { @@ -302,7 +330,8 @@ int set_selection(const struct tiocl_selection __user *sel, struct tty_struct *t * queue of the tty associated with the current console. * Invoked by ioctl(). * - * Locking: always called with BTM from vt_ioctl + * Locking: called without locks. Calls the ldisc wrongly with + * unsafe methods, */ int paste_selection(struct tty_struct *tty) { @@ -317,13 +346,12 @@ int paste_selection(struct tty_struct *tty) poke_blanked_console(); console_unlock(); + /* FIXME: wtf is this supposed to achieve ? */ ld = tty_ldisc_ref(tty); - if (!ld) { - tty_unlock(); + if (!ld) ld = tty_ldisc_ref_wait(tty); - tty_lock(); - } + /* FIXME: this is completely unsafe */ add_wait_queue(&vc->paste_wait, &wait); while (sel_buffer && sel_buffer_lth > pasted) { set_current_state(TASK_INTERRUPTIBLE); diff --git a/drivers/tty/vt/vc_screen.c b/drivers/tty/vt/vc_screen.c index 7a367ff5122..fa7268a93c0 100644 --- a/drivers/tty/vt/vc_screen.c +++ b/drivers/tty/vt/vc_screen.c @@ -608,10 +608,10 @@ vcs_open(struct inode *inode, struct file *filp) unsigned int currcons = iminor(inode) & 127; int ret = 0; - tty_lock(); + console_lock(); if(currcons && !vc_cons_allocated(currcons-1)) ret = -ENXIO; - tty_unlock(); + console_unlock(); return ret; } diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index e716839fab6..3bdd4b19dd0 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -99,7 +99,6 @@ #include <linux/notifier.h> #include <linux/device.h> #include <linux/io.h> -#include <asm/system.h> #include <linux/uaccess.h> #include <linux/kdb.h> #include <linux/ctype.h> @@ -1028,9 +1027,9 @@ void vc_deallocate(unsigned int currcons) * VT102 emulator */ -#define set_kbd(vc, x) set_vc_kbd_mode(kbd_table + (vc)->vc_num, (x)) -#define clr_kbd(vc, x) clr_vc_kbd_mode(kbd_table + (vc)->vc_num, (x)) -#define is_kbd(vc, x) vc_kbd_mode(kbd_table + (vc)->vc_num, (x)) +#define set_kbd(vc, x) vt_set_kbd_mode_bit((vc)->vc_num, (x)) +#define clr_kbd(vc, x) vt_clr_kbd_mode_bit((vc)->vc_num, (x)) +#define is_kbd(vc, x) vt_get_kbd_mode_bit((vc)->vc_num, (x)) #define decarm VC_REPEAT #define decckm VC_CKMODE @@ -1652,16 +1651,7 @@ static void reset_terminal(struct vc_data *vc, int do_clear) vc->vc_deccm = global_cursor_default; vc->vc_decim = 0; - set_kbd(vc, decarm); - clr_kbd(vc, decckm); - clr_kbd(vc, kbdapplic); - clr_kbd(vc, lnm); - kbd_table[vc->vc_num].lockstate = 0; - kbd_table[vc->vc_num].slockstate = 0; - kbd_table[vc->vc_num].ledmode = LED_SHOW_FLAGS; - kbd_table[vc->vc_num].ledflagstate = kbd_table[vc->vc_num].default_ledflagstate; - /* do not do set_leds here because this causes an endless tasklet loop - when the keyboard hasn't been initialized yet */ + vt_reset_keyboard(vc->vc_num); vc->vc_cursor_type = cur_default; vc->vc_complement_mask = vc->vc_s_complement_mask; @@ -1979,7 +1969,7 @@ static void do_con_trol(struct tty_struct *tty, struct vc_data *vc, int c) case 'q': /* DECLL - but only 3 leds */ /* map 0,1,2,3 to 0,1,2,4 */ if (vc->vc_par[0] < 4) - setledstate(kbd_table + vc->vc_num, + vt_set_led_state(vc->vc_num, (vc->vc_par[0] < 3) ? vc->vc_par[0] : 4); return; case 'r': @@ -2632,7 +2622,9 @@ int tioclinux(struct tty_struct *tty, unsigned long arg) console_unlock(); break; case TIOCL_SELLOADLUT: + console_lock(); ret = sel_loadlut(p); + console_unlock(); break; case TIOCL_GETSHIFTSTATE: @@ -2642,15 +2634,19 @@ int tioclinux(struct tty_struct *tty, unsigned long arg) * kernel-internal variable; programs not closely * related to the kernel should not use this. */ - data = shift_state; + data = vt_get_shift_state(); ret = __put_user(data, p); break; case TIOCL_GETMOUSEREPORTING: + console_lock(); /* May be overkill */ data = mouse_reporting(); + console_unlock(); ret = __put_user(data, p); break; case TIOCL_SETVESABLANK: + console_lock(); ret = set_vesa_blanking(p); + console_unlock(); break; case TIOCL_GETKMSGREDIRECT: data = vt_get_kmsg_redirect(); @@ -2667,13 +2663,21 @@ int tioclinux(struct tty_struct *tty, unsigned long arg) } break; case TIOCL_GETFGCONSOLE: + /* No locking needed as this is a transiently + correct return anyway if the caller hasn't + disabled switching */ ret = fg_console; break; case TIOCL_SCROLLCONSOLE: if (get_user(lines, (s32 __user *)(p+4))) { ret = -EFAULT; } else { + /* Need the console lock here. Note that lots + of other calls need fixing before the lock + is actually useful ! */ + console_lock(); scrollfront(vc_cons[fg_console].d, lines); + console_unlock(); ret = 0; } break; @@ -2753,8 +2757,7 @@ static void con_stop(struct tty_struct *tty) console_num = tty->index; if (!vc_cons_allocated(console_num)) return; - set_vc_kbd_led(kbd_table + console_num, VC_SCROLLOCK); - set_leds(); + vt_kbd_con_stop(console_num); } /* @@ -2768,8 +2771,7 @@ static void con_start(struct tty_struct *tty) console_num = tty->index; if (!vc_cons_allocated(console_num)) return; - clr_vc_kbd_led(kbd_table + console_num, VC_SCROLLOCK); - set_leds(); + vt_kbd_con_start(console_num); } static void con_flush_chars(struct tty_struct *tty) @@ -2991,7 +2993,7 @@ int __init vty_init(const struct file_operations *console_fops) console_driver = alloc_tty_driver(MAX_NR_CONSOLES); if (!console_driver) panic("Couldn't allocate console driver\n"); - console_driver->owner = THIS_MODULE; + console_driver->name = "tty"; console_driver->name_base = 1; console_driver->major = TTY_MAJOR; @@ -3980,9 +3982,6 @@ static int con_font_get(struct vc_data *vc, struct console_font_op *op) int rc = -EINVAL; int c; - if (vc->vc_mode != KD_TEXT) - return -EINVAL; - if (op->data) { font.data = kmalloc(max_font_size, GFP_KERNEL); if (!font.data) @@ -3991,7 +3990,9 @@ static int con_font_get(struct vc_data *vc, struct console_font_op *op) font.data = NULL; console_lock(); - if (vc->vc_sw->con_font_get) + if (vc->vc_mode != KD_TEXT) + rc = -EINVAL; + else if (vc->vc_sw->con_font_get) rc = vc->vc_sw->con_font_get(vc, &font); else rc = -ENOSYS; @@ -4073,7 +4074,9 @@ static int con_font_set(struct vc_data *vc, struct console_font_op *op) if (IS_ERR(font.data)) return PTR_ERR(font.data); console_lock(); - if (vc->vc_sw->con_font_set) + if (vc->vc_mode != KD_TEXT) + rc = -EINVAL; + else if (vc->vc_sw->con_font_set) rc = vc->vc_sw->con_font_set(vc, &font, op->flags); else rc = -ENOSYS; @@ -4089,8 +4092,6 @@ static int con_font_default(struct vc_data *vc, struct console_font_op *op) char *s = name; int rc; - if (vc->vc_mode != KD_TEXT) - return -EINVAL; if (!op->data) s = NULL; @@ -4100,6 +4101,10 @@ static int con_font_default(struct vc_data *vc, struct console_font_op *op) name[MAX_FONT_NAME - 1] = 0; console_lock(); + if (vc->vc_mode != KD_TEXT) { + console_unlock(); + return -EINVAL; + } if (vc->vc_sw->con_font_default) rc = vc->vc_sw->con_font_default(vc, &font, s); else @@ -4117,11 +4122,11 @@ static int con_font_copy(struct vc_data *vc, struct console_font_op *op) int con = op->height; int rc; - if (vc->vc_mode != KD_TEXT) - return -EINVAL; console_lock(); - if (!vc->vc_sw->con_font_copy) + if (vc->vc_mode != KD_TEXT) + rc = -EINVAL; + else if (!vc->vc_sw->con_font_copy) rc = -ENOSYS; else if (con < 0 || !vc_cons_allocated(con)) rc = -ENOTTY; diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c index 65447c5f91d..ede2ef18d2f 100644 --- a/drivers/tty/vt/vt_ioctl.c +++ b/drivers/tty/vt/vt_ioctl.c @@ -130,7 +130,7 @@ static void vt_event_wait(struct vt_event_wait *vw) list_add(&vw->list, &vt_events); spin_unlock_irqrestore(&vt_event_lock, flags); /* Wait for it to pass */ - wait_event_interruptible_tty(vt_event_waitqueue, vw->done); + wait_event_interruptible(vt_event_waitqueue, vw->done); /* Dequeue it */ spin_lock_irqsave(&vt_event_lock, flags); list_del(&vw->list); @@ -195,232 +195,7 @@ int vt_waitactive(int n) #define GPLAST 0x3df #define GPNUM (GPLAST - GPFIRST + 1) -#define i (tmp.kb_index) -#define s (tmp.kb_table) -#define v (tmp.kb_value) -static inline int -do_kdsk_ioctl(int cmd, struct kbentry __user *user_kbe, int perm, struct kbd_struct *kbd) -{ - struct kbentry tmp; - ushort *key_map, val, ov; - - if (copy_from_user(&tmp, user_kbe, sizeof(struct kbentry))) - return -EFAULT; - if (!capable(CAP_SYS_TTY_CONFIG)) - perm = 0; - - switch (cmd) { - case KDGKBENT: - key_map = key_maps[s]; - if (key_map) { - val = U(key_map[i]); - if (kbd->kbdmode != VC_UNICODE && KTYP(val) >= NR_TYPES) - val = K_HOLE; - } else - val = (i ? K_HOLE : K_NOSUCHMAP); - return put_user(val, &user_kbe->kb_value); - case KDSKBENT: - if (!perm) - return -EPERM; - if (!i && v == K_NOSUCHMAP) { - /* deallocate map */ - key_map = key_maps[s]; - if (s && key_map) { - key_maps[s] = NULL; - if (key_map[0] == U(K_ALLOCATED)) { - kfree(key_map); - keymap_count--; - } - } - break; - } - - if (KTYP(v) < NR_TYPES) { - if (KVAL(v) > max_vals[KTYP(v)]) - return -EINVAL; - } else - if (kbd->kbdmode != VC_UNICODE) - return -EINVAL; - - /* ++Geert: non-PC keyboards may generate keycode zero */ -#if !defined(__mc68000__) && !defined(__powerpc__) - /* assignment to entry 0 only tests validity of args */ - if (!i) - break; -#endif - - if (!(key_map = key_maps[s])) { - int j; - - if (keymap_count >= MAX_NR_OF_USER_KEYMAPS && - !capable(CAP_SYS_RESOURCE)) - return -EPERM; - - key_map = kmalloc(sizeof(plain_map), - GFP_KERNEL); - if (!key_map) - return -ENOMEM; - key_maps[s] = key_map; - key_map[0] = U(K_ALLOCATED); - for (j = 1; j < NR_KEYS; j++) - key_map[j] = U(K_HOLE); - keymap_count++; - } - ov = U(key_map[i]); - if (v == ov) - break; /* nothing to do */ - /* - * Attention Key. - */ - if (((ov == K_SAK) || (v == K_SAK)) && !capable(CAP_SYS_ADMIN)) - return -EPERM; - key_map[i] = U(v); - if (!s && (KTYP(ov) == KT_SHIFT || KTYP(v) == KT_SHIFT)) - compute_shiftstate(); - break; - } - return 0; -} -#undef i -#undef s -#undef v - -static inline int -do_kbkeycode_ioctl(int cmd, struct kbkeycode __user *user_kbkc, int perm) -{ - struct kbkeycode tmp; - int kc = 0; - - if (copy_from_user(&tmp, user_kbkc, sizeof(struct kbkeycode))) - return -EFAULT; - switch (cmd) { - case KDGETKEYCODE: - kc = getkeycode(tmp.scancode); - if (kc >= 0) - kc = put_user(kc, &user_kbkc->keycode); - break; - case KDSETKEYCODE: - if (!perm) - return -EPERM; - kc = setkeycode(tmp.scancode, tmp.keycode); - break; - } - return kc; -} - -static inline int -do_kdgkb_ioctl(int cmd, struct kbsentry __user *user_kdgkb, int perm) -{ - struct kbsentry *kbs; - char *p; - u_char *q; - u_char __user *up; - int sz; - int delta; - char *first_free, *fj, *fnw; - int i, j, k; - int ret; - - if (!capable(CAP_SYS_TTY_CONFIG)) - perm = 0; - - kbs = kmalloc(sizeof(*kbs), GFP_KERNEL); - if (!kbs) { - ret = -ENOMEM; - goto reterr; - } - - /* we mostly copy too much here (512bytes), but who cares ;) */ - if (copy_from_user(kbs, user_kdgkb, sizeof(struct kbsentry))) { - ret = -EFAULT; - goto reterr; - } - kbs->kb_string[sizeof(kbs->kb_string)-1] = '\0'; - i = kbs->kb_func; - - switch (cmd) { - case KDGKBSENT: - sz = sizeof(kbs->kb_string) - 1; /* sz should have been - a struct member */ - up = user_kdgkb->kb_string; - p = func_table[i]; - if(p) - for ( ; *p && sz; p++, sz--) - if (put_user(*p, up++)) { - ret = -EFAULT; - goto reterr; - } - if (put_user('\0', up)) { - ret = -EFAULT; - goto reterr; - } - kfree(kbs); - return ((p && *p) ? -EOVERFLOW : 0); - case KDSKBSENT: - if (!perm) { - ret = -EPERM; - goto reterr; - } - - q = func_table[i]; - first_free = funcbufptr + (funcbufsize - funcbufleft); - for (j = i+1; j < MAX_NR_FUNC && !func_table[j]; j++) - ; - if (j < MAX_NR_FUNC) - fj = func_table[j]; - else - fj = first_free; - - delta = (q ? -strlen(q) : 1) + strlen(kbs->kb_string); - if (delta <= funcbufleft) { /* it fits in current buf */ - if (j < MAX_NR_FUNC) { - memmove(fj + delta, fj, first_free - fj); - for (k = j; k < MAX_NR_FUNC; k++) - if (func_table[k]) - func_table[k] += delta; - } - if (!q) - func_table[i] = fj; - funcbufleft -= delta; - } else { /* allocate a larger buffer */ - sz = 256; - while (sz < funcbufsize - funcbufleft + delta) - sz <<= 1; - fnw = kmalloc(sz, GFP_KERNEL); - if(!fnw) { - ret = -ENOMEM; - goto reterr; - } - - if (!q) - func_table[i] = fj; - if (fj > funcbufptr) - memmove(fnw, funcbufptr, fj - funcbufptr); - for (k = 0; k < j; k++) - if (func_table[k]) - func_table[k] = fnw + (func_table[k] - funcbufptr); - - if (first_free > fj) { - memmove(fnw + (fj - funcbufptr) + delta, fj, first_free - fj); - for (k = j; k < MAX_NR_FUNC; k++) - if (func_table[k]) - func_table[k] = fnw + (func_table[k] - funcbufptr) + delta; - } - if (funcbufptr != func_buf) - kfree(funcbufptr); - funcbufptr = fnw; - funcbufleft = funcbufleft - delta + sz - funcbufsize; - funcbufsize = sz; - } - strcpy(func_table[i], kbs->kb_string); - break; - } - ret = 0; -reterr: - kfree(kbs); - return ret; -} static inline int do_fontx_ioctl(int cmd, struct consolefontdesc __user *user_cfd, int perm, struct console_font_op *op) @@ -497,7 +272,6 @@ int vt_ioctl(struct tty_struct *tty, { struct vc_data *vc = tty->driver_data; struct console_font_op op; /* used in multiple places here */ - struct kbd_struct * kbd; unsigned int console; unsigned char ucval; unsigned int uival; @@ -507,7 +281,6 @@ int vt_ioctl(struct tty_struct *tty, console = vc->vc_num; - tty_lock(); if (!vc_cons_allocated(console)) { /* impossible? */ ret = -ENOIOCTLCMD; @@ -523,19 +296,18 @@ int vt_ioctl(struct tty_struct *tty, if (current->signal->tty == tty || capable(CAP_SYS_TTY_CONFIG)) perm = 1; - kbd = kbd_table + console; switch (cmd) { case TIOCLINUX: ret = tioclinux(tty, arg); break; case KIOCSOUND: if (!perm) - goto eperm; + return -EPERM; /* * The use of PIT_TICK_RATE is historic, it used to be * the platform-dependent CLOCK_TICK_RATE between 2.6.12 * and 2.6.36, which was a minor but unfortunate ABI - * change. + * change. kd_mksound is locked by the input layer. */ if (arg) arg = PIT_TICK_RATE / arg; @@ -544,7 +316,7 @@ int vt_ioctl(struct tty_struct *tty, case KDMKTONE: if (!perm) - goto eperm; + return -EPERM; { unsigned int ticks, count; @@ -562,10 +334,11 @@ int vt_ioctl(struct tty_struct *tty, case KDGKBTYPE: /* - * this is naive. + * this is naïve. */ ucval = KB_101; - goto setchar; + ret = put_user(ucval, (char __user *)arg); + break; /* * These cannot be implemented on any machine that implements @@ -579,6 +352,8 @@ int vt_ioctl(struct tty_struct *tty, /* * KDADDIO and KDDELIO may be able to add ports beyond what * we reject here, but to be safe... + * + * These are locked internally via sys_ioperm */ if (arg < GPFIRST || arg > GPLAST) { ret = -EINVAL; @@ -601,7 +376,7 @@ int vt_ioctl(struct tty_struct *tty, struct kbd_repeat kbrep; if (!capable(CAP_SYS_TTY_CONFIG)) - goto eperm; + return -EPERM; if (copy_from_user(&kbrep, up, sizeof(struct kbd_repeat))) { ret = -EFAULT; @@ -625,7 +400,7 @@ int vt_ioctl(struct tty_struct *tty, * need to restore their engine state. --BenH */ if (!perm) - goto eperm; + return -EPERM; switch (arg) { case KD_GRAPHICS: break; @@ -638,6 +413,7 @@ int vt_ioctl(struct tty_struct *tty, ret = -EINVAL; goto out; } + /* FIXME: this needs the console lock extending */ if (vc->vc_mode == (unsigned char) arg) break; vc->vc_mode = (unsigned char) arg; @@ -669,69 +445,26 @@ int vt_ioctl(struct tty_struct *tty, case KDSKBMODE: if (!perm) - goto eperm; - switch(arg) { - case K_RAW: - kbd->kbdmode = VC_RAW; - break; - case K_MEDIUMRAW: - kbd->kbdmode = VC_MEDIUMRAW; - break; - case K_XLATE: - kbd->kbdmode = VC_XLATE; - compute_shiftstate(); - break; - case K_UNICODE: - kbd->kbdmode = VC_UNICODE; - compute_shiftstate(); - break; - case K_OFF: - kbd->kbdmode = VC_OFF; - break; - default: - ret = -EINVAL; - goto out; - } - tty_ldisc_flush(tty); + return -EPERM; + ret = vt_do_kdskbmode(console, arg); + if (ret == 0) + tty_ldisc_flush(tty); break; case KDGKBMODE: - switch (kbd->kbdmode) { - case VC_RAW: - uival = K_RAW; - break; - case VC_MEDIUMRAW: - uival = K_MEDIUMRAW; - break; - case VC_UNICODE: - uival = K_UNICODE; - break; - case VC_OFF: - uival = K_OFF; - break; - default: - uival = K_XLATE; - break; - } - goto setint; + uival = vt_do_kdgkbmode(console); + ret = put_user(uival, (int __user *)arg); + break; /* this could be folded into KDSKBMODE, but for compatibility reasons it is not so easy to fold KDGKBMETA into KDGKBMODE */ case KDSKBMETA: - switch(arg) { - case K_METABIT: - clr_vc_kbd_mode(kbd, VC_META); - break; - case K_ESCPREFIX: - set_vc_kbd_mode(kbd, VC_META); - break; - default: - ret = -EINVAL; - } + ret = vt_do_kdskbmeta(console, arg); break; case KDGKBMETA: - uival = (vc_kbd_mode(kbd, VC_META) ? K_ESCPREFIX : K_METABIT); + /* FIXME: should review whether this is worth locking */ + uival = vt_do_kdgkbmeta(console); setint: ret = put_user(uival, (int __user *)arg); break; @@ -740,133 +473,35 @@ int vt_ioctl(struct tty_struct *tty, case KDSETKEYCODE: if(!capable(CAP_SYS_TTY_CONFIG)) perm = 0; - ret = do_kbkeycode_ioctl(cmd, up, perm); + ret = vt_do_kbkeycode_ioctl(cmd, up, perm); break; case KDGKBENT: case KDSKBENT: - ret = do_kdsk_ioctl(cmd, up, perm, kbd); + ret = vt_do_kdsk_ioctl(cmd, up, perm, console); break; case KDGKBSENT: case KDSKBSENT: - ret = do_kdgkb_ioctl(cmd, up, perm); + ret = vt_do_kdgkb_ioctl(cmd, up, perm); break; + /* Diacritical processing. Handled in keyboard.c as it has + to operate on the keyboard locks and structures */ case KDGKBDIACR: - { - struct kbdiacrs __user *a = up; - struct kbdiacr diacr; - int i; - - if (put_user(accent_table_size, &a->kb_cnt)) { - ret = -EFAULT; - break; - } - for (i = 0; i < accent_table_size; i++) { - diacr.diacr = conv_uni_to_8bit(accent_table[i].diacr); - diacr.base = conv_uni_to_8bit(accent_table[i].base); - diacr.result = conv_uni_to_8bit(accent_table[i].result); - if (copy_to_user(a->kbdiacr + i, &diacr, sizeof(struct kbdiacr))) { - ret = -EFAULT; - break; - } - } - break; - } case KDGKBDIACRUC: - { - struct kbdiacrsuc __user *a = up; - - if (put_user(accent_table_size, &a->kb_cnt)) - ret = -EFAULT; - else if (copy_to_user(a->kbdiacruc, accent_table, - accent_table_size*sizeof(struct kbdiacruc))) - ret = -EFAULT; - break; - } - case KDSKBDIACR: - { - struct kbdiacrs __user *a = up; - struct kbdiacr diacr; - unsigned int ct; - int i; - - if (!perm) - goto eperm; - if (get_user(ct,&a->kb_cnt)) { - ret = -EFAULT; - break; - } - if (ct >= MAX_DIACR) { - ret = -EINVAL; - break; - } - accent_table_size = ct; - for (i = 0; i < ct; i++) { - if (copy_from_user(&diacr, a->kbdiacr + i, sizeof(struct kbdiacr))) { - ret = -EFAULT; - break; - } - accent_table[i].diacr = conv_8bit_to_uni(diacr.diacr); - accent_table[i].base = conv_8bit_to_uni(diacr.base); - accent_table[i].result = conv_8bit_to_uni(diacr.result); - } - break; - } - case KDSKBDIACRUC: - { - struct kbdiacrsuc __user *a = up; - unsigned int ct; - - if (!perm) - goto eperm; - if (get_user(ct,&a->kb_cnt)) { - ret = -EFAULT; - break; - } - if (ct >= MAX_DIACR) { - ret = -EINVAL; - break; - } - accent_table_size = ct; - if (copy_from_user(accent_table, a->kbdiacruc, ct*sizeof(struct kbdiacruc))) - ret = -EFAULT; + ret = vt_do_diacrit(cmd, up, perm); break; - } /* the ioctls below read/set the flags usually shown in the leds */ /* don't use them - they will go away without warning */ case KDGKBLED: - ucval = kbd->ledflagstate | (kbd->default_ledflagstate << 4); - goto setchar; - case KDSKBLED: - if (!perm) - goto eperm; - if (arg & ~0x77) { - ret = -EINVAL; - break; - } - kbd->ledflagstate = (arg & 7); - kbd->default_ledflagstate = ((arg >> 4) & 7); - set_leds(); - break; - - /* the ioctls below only set the lights, not the functions */ - /* for those, see KDGKBLED and KDSKBLED above */ case KDGETLED: - ucval = getledstate(); - setchar: - ret = put_user(ucval, (char __user *)arg); - break; - case KDSETLED: - if (!perm) - goto eperm; - setledstate(kbd, arg); + ret = vt_do_kdskled(console, cmd, arg, perm); break; /* @@ -879,7 +514,7 @@ int vt_ioctl(struct tty_struct *tty, case KDSIGACCEPT: { if (!perm || !capable(CAP_KILL)) - goto eperm; + return -EPERM; if (!valid_signal(arg) || arg < 1 || arg == SIGKILL) ret = -EINVAL; else { @@ -897,7 +532,7 @@ int vt_ioctl(struct tty_struct *tty, struct vt_mode tmp; if (!perm) - goto eperm; + return -EPERM; if (copy_from_user(&tmp, up, sizeof(struct vt_mode))) { ret = -EFAULT; goto out; @@ -943,6 +578,7 @@ int vt_ioctl(struct tty_struct *tty, struct vt_stat __user *vtstat = up; unsigned short state, mask; + /* Review: FIXME: Console lock ? */ if (put_user(fg_console + 1, &vtstat->v_active)) ret = -EFAULT; else { @@ -960,6 +596,7 @@ int vt_ioctl(struct tty_struct *tty, * Returns the first available (non-opened) console. */ case VT_OPENQRY: + /* FIXME: locking ? - but then this is a stupid API */ for (i = 0; i < MAX_NR_CONSOLES; ++i) if (! VT_IS_IN_USE(i)) break; @@ -973,7 +610,7 @@ int vt_ioctl(struct tty_struct *tty, */ case VT_ACTIVATE: if (!perm) - goto eperm; + return -EPERM; if (arg == 0 || arg > MAX_NR_CONSOLES) ret = -ENXIO; else { @@ -992,7 +629,7 @@ int vt_ioctl(struct tty_struct *tty, struct vt_setactivate vsa; if (!perm) - goto eperm; + return -EPERM; if (copy_from_user(&vsa, (struct vt_setactivate __user *)arg, sizeof(struct vt_setactivate))) { @@ -1020,6 +657,7 @@ int vt_ioctl(struct tty_struct *tty, if (ret) break; /* Commence switch and lock */ + /* Review set_console locks */ set_console(vsa.console); } break; @@ -1030,7 +668,7 @@ int vt_ioctl(struct tty_struct *tty, */ case VT_WAITACTIVE: if (!perm) - goto eperm; + return -EPERM; if (arg == 0 || arg > MAX_NR_CONSOLES) ret = -ENXIO; else @@ -1049,16 +687,17 @@ int vt_ioctl(struct tty_struct *tty, */ case VT_RELDISP: if (!perm) - goto eperm; + return -EPERM; + console_lock(); if (vc->vt_mode.mode != VT_PROCESS) { + console_unlock(); ret = -EINVAL; break; } /* * Switching-from response */ - console_lock(); if (vc->vt_newvt >= 0) { if (arg == 0) /* @@ -1135,7 +774,7 @@ int vt_ioctl(struct tty_struct *tty, ushort ll,cc; if (!perm) - goto eperm; + return -EPERM; if (get_user(ll, &vtsizes->v_rows) || get_user(cc, &vtsizes->v_cols)) ret = -EFAULT; @@ -1146,6 +785,7 @@ int vt_ioctl(struct tty_struct *tty, if (vc) { vc->vc_resize_user = 1; + /* FIXME: review v tty lock */ vc_resize(vc_cons[i].d, cc, ll); } } @@ -1159,7 +799,7 @@ int vt_ioctl(struct tty_struct *tty, struct vt_consize __user *vtconsize = up; ushort ll,cc,vlin,clin,vcol,ccol; if (!perm) - goto eperm; + return -EPERM; if (!access_ok(VERIFY_READ, vtconsize, sizeof(struct vt_consize))) { ret = -EFAULT; @@ -1215,7 +855,7 @@ int vt_ioctl(struct tty_struct *tty, case PIO_FONT: { if (!perm) - goto eperm; + return -EPERM; op.op = KD_FONT_OP_SET; op.flags = KD_FONT_FLAG_OLD | KD_FONT_FLAG_DONT_RECALC; /* Compatibility */ op.width = 8; @@ -1256,7 +896,7 @@ int vt_ioctl(struct tty_struct *tty, case PIO_FONTRESET: { if (!perm) - goto eperm; + return -EPERM; #ifdef BROKEN_GRAPHICS_PROGRAMS /* With BROKEN_GRAPHICS_PROGRAMS defined, the default @@ -1282,7 +922,7 @@ int vt_ioctl(struct tty_struct *tty, break; } if (!perm && op.op != KD_FONT_OP_GET) - goto eperm; + return -EPERM; ret = con_font_op(vc, &op); if (ret) break; @@ -1294,50 +934,65 @@ int vt_ioctl(struct tty_struct *tty, case PIO_SCRNMAP: if (!perm) ret = -EPERM; - else + else { + tty_lock(); ret = con_set_trans_old(up); + tty_unlock(); + } break; case GIO_SCRNMAP: + tty_lock(); ret = con_get_trans_old(up); + tty_unlock(); break; case PIO_UNISCRNMAP: if (!perm) ret = -EPERM; - else + else { + tty_lock(); ret = con_set_trans_new(up); + tty_unlock(); + } break; case GIO_UNISCRNMAP: + tty_lock(); ret = con_get_trans_new(up); + tty_unlock(); break; case PIO_UNIMAPCLR: { struct unimapinit ui; if (!perm) - goto eperm; + return -EPERM; ret = copy_from_user(&ui, up, sizeof(struct unimapinit)); if (ret) ret = -EFAULT; - else + else { + tty_lock(); con_clear_unimap(vc, &ui); + tty_unlock(); + } break; } case PIO_UNIMAP: case GIO_UNIMAP: + tty_lock(); ret = do_unimap_ioctl(cmd, up, perm, vc); + tty_unlock(); break; case VT_LOCKSWITCH: if (!capable(CAP_SYS_TTY_CONFIG)) - goto eperm; + return -EPERM; vt_dont_switch = 1; break; case VT_UNLOCKSWITCH: if (!capable(CAP_SYS_TTY_CONFIG)) - goto eperm; + return -EPERM; vt_dont_switch = 0; break; case VT_GETHIFONTMASK: @@ -1351,17 +1006,13 @@ int vt_ioctl(struct tty_struct *tty, ret = -ENOIOCTLCMD; } out: - tty_unlock(); return ret; -eperm: - ret = -EPERM; - goto out; } void reset_vc(struct vc_data *vc) { vc->vc_mode = KD_TEXT; - kbd_table[vc->vc_num].kbdmode = default_utf8 ? VC_UNICODE : VC_XLATE; + vt_reset_unicode(vc->vc_num); vc->vt_mode.mode = VT_AUTO; vc->vt_mode.waitv = 0; vc->vt_mode.relsig = 0; @@ -1384,6 +1035,7 @@ void vc_SAK(struct work_struct *work) console_lock(); vc = vc_con->d; if (vc) { + /* FIXME: review tty ref counting */ tty = vc->port.tty; /* * SAK should also work in all raw modes and reset @@ -1516,8 +1168,6 @@ long vt_compat_ioctl(struct tty_struct *tty, console = vc->vc_num; - tty_lock(); - if (!vc_cons_allocated(console)) { /* impossible? */ ret = -ENOIOCTLCMD; goto out; @@ -1546,7 +1196,9 @@ long vt_compat_ioctl(struct tty_struct *tty, case PIO_UNIMAP: case GIO_UNIMAP: + tty_lock(); ret = compat_unimap_ioctl(cmd, up, perm, vc); + tty_unlock(); break; /* @@ -1583,11 +1235,9 @@ long vt_compat_ioctl(struct tty_struct *tty, goto fallback; } out: - tty_unlock(); return ret; fallback: - tty_unlock(); return vt_ioctl(tty, cmd, arg); } @@ -1773,13 +1423,10 @@ int vt_move_to_console(unsigned int vt, int alloc) return -EIO; } console_unlock(); - tty_lock(); if (vt_waitactive(vt + 1)) { pr_debug("Suspend: Can't switch VCs."); - tty_unlock(); return -EINTR; } - tty_unlock(); return prev; } |