diff options
Diffstat (limited to 'drivers/tty')
100 files changed, 3606 insertions, 1523 deletions
diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c index 42d0a2581a8..9d7d00cdfec 100644 --- a/drivers/tty/amiserial.c +++ b/drivers/tty/amiserial.c @@ -1771,6 +1771,7 @@ fail_free_irq: fail_unregister: tty_unregister_driver(serial_driver); fail_put_tty_driver: + tty_port_destroy(&state->tport); put_tty_driver(serial_driver); return error; } @@ -1785,6 +1786,7 @@ static int __exit amiga_serial_remove(struct platform_device *pdev) printk("SERIAL: failed to unregister serial driver (%d)\n", error); put_tty_driver(serial_driver); + tty_port_destroy(&state->tport); free_irq(IRQ_AMIGA_TBE, state); free_irq(IRQ_AMIGA_RBF, state); diff --git a/drivers/tty/bfin_jtag_comm.c b/drivers/tty/bfin_jtag_comm.c index 02b7d3a0969..1cfcdbf1d0c 100644 --- a/drivers/tty/bfin_jtag_comm.c +++ b/drivers/tty/bfin_jtag_comm.c @@ -240,8 +240,6 @@ static int __init bfin_jc_init(void) { int ret; - tty_port_init(&port); - bfin_jc_kthread = kthread_create(bfin_jc_emudat_manager, NULL, DRV_NAME); if (IS_ERR(bfin_jc_kthread)) return PTR_ERR(bfin_jc_kthread); @@ -257,6 +255,8 @@ static int __init bfin_jc_init(void) if (!bfin_jc_driver) goto err_driver; + tty_port_init(&port); + bfin_jc_driver->driver_name = DRV_NAME; bfin_jc_driver->name = DEV_NAME; bfin_jc_driver->type = TTY_DRIVER_TYPE_SERIAL; @@ -274,6 +274,7 @@ static int __init bfin_jc_init(void) return 0; err: + tty_port_destroy(&port); put_tty_driver(bfin_jc_driver); err_driver: kfree(bfin_jc_write_buf.buf); @@ -289,6 +290,7 @@ static void __exit bfin_jc_exit(void) kfree(bfin_jc_write_buf.buf); tty_unregister_driver(bfin_jc_driver); put_tty_driver(bfin_jc_driver); + tty_port_destroy(&port); } module_exit(bfin_jc_exit); diff --git a/drivers/tty/cyclades.c b/drivers/tty/cyclades.c index 0a6a0bc1b59..b09c8d1f9a6 100644 --- a/drivers/tty/cyclades.c +++ b/drivers/tty/cyclades.c @@ -3099,7 +3099,7 @@ static const struct tty_port_operations cyz_port_ops = { * --------------------------------------------------------------------- */ -static int __devinit cy_init_card(struct cyclades_card *cinfo) +static int cy_init_card(struct cyclades_card *cinfo) { struct cyclades_port *info; unsigned int channel, port; @@ -3196,7 +3196,7 @@ static int __devinit cy_init_card(struct cyclades_card *cinfo) /* initialize chips on Cyclom-Y card -- return number of valid chips (which is number of ports/4) */ -static unsigned short __devinit cyy_init_card(void __iomem *true_base_addr, +static unsigned short cyy_init_card(void __iomem *true_base_addr, int index) { unsigned int chip_number; @@ -3405,7 +3405,7 @@ static int __init cy_detect_isa(void) } /* cy_detect_isa */ #ifdef CONFIG_PCI -static inline int __devinit cyc_isfwstr(const char *str, unsigned int size) +static inline int cyc_isfwstr(const char *str, unsigned int size) { unsigned int a; @@ -3420,7 +3420,7 @@ static inline int __devinit cyc_isfwstr(const char *str, unsigned int size) return 0; } -static inline void __devinit cyz_fpga_copy(void __iomem *fpga, const u8 *data, +static inline void cyz_fpga_copy(void __iomem *fpga, const u8 *data, unsigned int size) { for (; size > 0; size--) { @@ -3429,7 +3429,7 @@ static inline void __devinit cyz_fpga_copy(void __iomem *fpga, const u8 *data, } } -static void __devinit plx_init(struct pci_dev *pdev, int irq, +static void plx_init(struct pci_dev *pdev, int irq, struct RUNTIME_9060 __iomem *addr) { /* Reset PLX */ @@ -3449,7 +3449,7 @@ static void __devinit plx_init(struct pci_dev *pdev, int irq, pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, irq); } -static int __devinit __cyz_load_fw(const struct firmware *fw, +static int __cyz_load_fw(const struct firmware *fw, const char *name, const u32 mailbox, void __iomem *base, void __iomem *fpga) { @@ -3526,7 +3526,7 @@ static int __devinit __cyz_load_fw(const struct firmware *fw, return 0; } -static int __devinit cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr, +static int cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr, struct RUNTIME_9060 __iomem *ctl_addr, int irq) { const struct firmware *fw; @@ -3692,7 +3692,7 @@ err: return retval; } -static int __devinit cy_pci_probe(struct pci_dev *pdev, +static int cy_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { struct cyclades_card *card; @@ -3931,10 +3931,10 @@ err: return retval; } -static void __devexit cy_pci_remove(struct pci_dev *pdev) +static void cy_pci_remove(struct pci_dev *pdev) { struct cyclades_card *cinfo = pci_get_drvdata(pdev); - unsigned int i; + unsigned int i, channel; /* non-Z with old PLX */ if (!cy_is_Z(cinfo) && (readb(cinfo->base_addr + CyPLX_VER) & 0x0f) == @@ -3960,9 +3960,11 @@ static void __devexit cy_pci_remove(struct pci_dev *pdev) pci_release_regions(pdev); cinfo->base_addr = NULL; - for (i = cinfo->first_line; i < cinfo->first_line + - cinfo->nports; i++) + for (channel = 0, i = cinfo->first_line; i < cinfo->first_line + + cinfo->nports; i++, channel++) { tty_unregister_device(cy_serial_driver, i); + tty_port_destroy(&cinfo->ports[channel].port); + } cinfo->nports = 0; kfree(cinfo->ports); } @@ -3971,7 +3973,7 @@ static struct pci_driver cy_pci_driver = { .name = "cyclades", .id_table = cy_pci_dev_id, .probe = cy_pci_probe, - .remove = __devexit_p(cy_pci_remove) + .remove = cy_pci_remove }; #endif diff --git a/drivers/tty/ehv_bytechan.c b/drivers/tty/ehv_bytechan.c index 4ab936b7aac..c117d775a22 100644 --- a/drivers/tty/ehv_bytechan.c +++ b/drivers/tty/ehv_bytechan.c @@ -699,7 +699,7 @@ static const struct tty_port_operations ehv_bc_tty_port_ops = { .shutdown = ehv_bc_tty_port_shutdown, }; -static int __devinit ehv_bc_tty_probe(struct platform_device *pdev) +static int ehv_bc_tty_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; struct ehv_bc_data *bc; @@ -757,6 +757,7 @@ static int __devinit ehv_bc_tty_probe(struct platform_device *pdev) return 0; error: + tty_port_destroy(&bc->port); irq_dispose_mapping(bc->tx_irq); irq_dispose_mapping(bc->rx_irq); @@ -770,6 +771,7 @@ static int ehv_bc_tty_remove(struct platform_device *pdev) tty_unregister_device(ehv_bc_driver, bc - bcs); + tty_port_destroy(&bc->port); irq_dispose_mapping(bc->tx_irq); irq_dispose_mapping(bc->rx_irq); diff --git a/drivers/tty/hvc/hvc_opal.c b/drivers/tty/hvc/hvc_opal.c index 0d2ea0c224c..be1a9a1e749 100644 --- a/drivers/tty/hvc/hvc_opal.c +++ b/drivers/tty/hvc/hvc_opal.c @@ -41,7 +41,7 @@ static const char hvc_opal_name[] = "hvc_opal"; -static struct of_device_id hvc_opal_match[] __devinitdata = { +static struct of_device_id hvc_opal_match[] = { { .name = "serial", .compatible = "ibm,opal-console-raw" }, { .name = "serial", .compatible = "ibm,opal-console-hvsi" }, { }, @@ -161,7 +161,7 @@ static const struct hv_ops hvc_opal_hvsi_ops = { .tiocmset = hvc_opal_hvsi_tiocmset, }; -static int __devinit hvc_opal_probe(struct platform_device *dev) +static int hvc_opal_probe(struct platform_device *dev) { const struct hv_ops *ops; struct hvc_struct *hp; @@ -222,7 +222,7 @@ static int __devinit hvc_opal_probe(struct platform_device *dev) return 0; } -static int __devexit hvc_opal_remove(struct platform_device *dev) +static int hvc_opal_remove(struct platform_device *dev) { struct hvc_struct *hp = dev_get_drvdata(&dev->dev); int rc, termno; @@ -239,7 +239,7 @@ static int __devexit hvc_opal_remove(struct platform_device *dev) static struct platform_driver hvc_opal_driver = { .probe = hvc_opal_probe, - .remove = __devexit_p(hvc_opal_remove), + .remove = hvc_opal_remove, .driver = { .name = hvc_opal_name, .owner = THIS_MODULE, diff --git a/drivers/tty/hvc/hvc_vio.c b/drivers/tty/hvc/hvc_vio.c index 070c0ee6864..ed6f5f1f5a5 100644 --- a/drivers/tty/hvc/hvc_vio.c +++ b/drivers/tty/hvc/hvc_vio.c @@ -53,7 +53,7 @@ static const char hvc_driver_name[] = "hvc_console"; -static struct vio_device_id hvc_driver_table[] __devinitdata = { +static struct vio_device_id hvc_driver_table[] = { {"serial", "hvterm1"}, #ifndef HVC_OLD_HVSI {"serial", "hvterm-protocol"}, @@ -293,7 +293,7 @@ static int udbg_hvc_getc(void) } } -static int __devinit hvc_vio_probe(struct vio_dev *vdev, +static int hvc_vio_probe(struct vio_dev *vdev, const struct vio_device_id *id) { const struct hv_ops *ops; @@ -362,7 +362,7 @@ static int __devinit hvc_vio_probe(struct vio_dev *vdev, return 0; } -static int __devexit hvc_vio_remove(struct vio_dev *vdev) +static int hvc_vio_remove(struct vio_dev *vdev) { struct hvc_struct *hp = dev_get_drvdata(&vdev->dev); int rc, termno; diff --git a/drivers/tty/hvc/hvc_xen.c b/drivers/tty/hvc/hvc_xen.c index f4abfe238f9..19843ec3f80 100644 --- a/drivers/tty/hvc/hvc_xen.c +++ b/drivers/tty/hvc/hvc_xen.c @@ -422,7 +422,7 @@ static int xencons_connect_backend(struct xenbus_device *dev, return ret; } -static int __devinit xencons_probe(struct xenbus_device *dev, +static int xencons_probe(struct xenbus_device *dev, const struct xenbus_device_id *id) { int ret, devid; diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c index cab5c7adf8e..87763573395 100644 --- a/drivers/tty/hvc/hvcs.c +++ b/drivers/tty/hvc/hvcs.c @@ -330,12 +330,12 @@ static int hvcs_open(struct tty_struct *tty, struct file *filp); static void hvcs_close(struct tty_struct *tty, struct file *filp); static void hvcs_hangup(struct tty_struct * tty); -static int __devinit hvcs_probe(struct vio_dev *dev, +static int hvcs_probe(struct vio_dev *dev, const struct vio_device_id *id); -static int __devexit hvcs_remove(struct vio_dev *dev); +static int hvcs_remove(struct vio_dev *dev); static int __init hvcs_module_init(void); static void __exit hvcs_module_exit(void); -static int __devinit hvcs_initialize(void); +static int hvcs_initialize(void); #define HVCS_SCHED_READ 0x00000001 #define HVCS_QUICK_READ 0x00000002 @@ -676,7 +676,7 @@ static int khvcsd(void *unused) return 0; } -static struct vio_device_id hvcs_driver_table[] __devinitdata= { +static struct vio_device_id hvcs_driver_table[] = { {"serial-server", "hvterm2"}, { "", "" } }; @@ -756,7 +756,7 @@ static int hvcs_get_index(void) return -1; } -static int __devinit hvcs_probe( +static int hvcs_probe( struct vio_dev *dev, const struct vio_device_id *id) { @@ -835,7 +835,7 @@ static int __devinit hvcs_probe( return 0; } -static int __devexit hvcs_remove(struct vio_dev *dev) +static int hvcs_remove(struct vio_dev *dev) { struct hvcs_struct *hvcsd = dev_get_drvdata(&dev->dev); unsigned long flags; @@ -874,7 +874,7 @@ static int __devexit hvcs_remove(struct vio_dev *dev) static struct vio_driver hvcs_vio_driver = { .id_table = hvcs_driver_table, .probe = hvcs_probe, - .remove = __devexit_p(hvcs_remove), + .remove = hvcs_remove, .name = hvcs_driver_name, }; @@ -1478,7 +1478,7 @@ static void hvcs_free_index_list(void) hvcs_index_count = 0; } -static int __devinit hvcs_initialize(void) +static int hvcs_initialize(void) { int rc, num_ttys_to_alloc; @@ -1496,8 +1496,10 @@ static int __devinit hvcs_initialize(void) num_ttys_to_alloc = hvcs_parm_num_devs; hvcs_tty_driver = alloc_tty_driver(num_ttys_to_alloc); - if (!hvcs_tty_driver) + if (!hvcs_tty_driver) { + mutex_unlock(&hvcs_init_mutex); return -ENOMEM; + } if (hvcs_alloc_index_list(num_ttys_to_alloc)) { rc = -ENOMEM; diff --git a/drivers/tty/hvc/hvsi.c b/drivers/tty/hvc/hvsi.c index 5b95b4f28cf..68357a6e4de 100644 --- a/drivers/tty/hvc/hvsi.c +++ b/drivers/tty/hvc/hvsi.c @@ -1218,6 +1218,7 @@ static int __init hvsi_console_init(void) if (hp->virq == 0) { printk(KERN_ERR "%s: couldn't create irq mapping for 0x%x\n", __func__, irq[0]); + tty_port_destroy(&hp->port); continue; } diff --git a/drivers/tty/ipwireless/network.c b/drivers/tty/ipwireless/network.c index 57102e66165..c0dfb642383 100644 --- a/drivers/tty/ipwireless/network.c +++ b/drivers/tty/ipwireless/network.c @@ -352,6 +352,8 @@ static struct sk_buff *ipw_packet_received_skb(unsigned char *data, } skb = dev_alloc_skb(length + 4); + if (skb == NULL) + return NULL; skb_reserve(skb, 2); memcpy(skb_put(skb, length), data, length); @@ -397,7 +399,8 @@ void ipwireless_network_packet_received(struct ipw_network *network, /* Send the data to the ppp_generic module. */ skb = ipw_packet_received_skb(data, length); - ppp_input(network->ppp_channel, skb); + if (skb) + ppp_input(network->ppp_channel, skb); } else spin_unlock_irqrestore(&network->lock, flags); diff --git a/drivers/tty/ipwireless/tty.c b/drivers/tty/ipwireless/tty.c index 160f0ad9589..2cde13ddf9f 100644 --- a/drivers/tty/ipwireless/tty.c +++ b/drivers/tty/ipwireless/tty.c @@ -566,6 +566,7 @@ void ipwireless_tty_free(struct ipw_tty *tty) ipwireless_disassociate_network_ttys(network, ttyj->channel_idx); tty_unregister_device(ipw_tty_driver, j); + tty_port_destroy(&ttyj->port); ttys[j] = NULL; mutex_unlock(&ttyj->ipw_tty_mutex); kfree(ttyj); diff --git a/drivers/tty/isicom.c b/drivers/tty/isicom.c index d7492e18360..3205b2e9090 100644 --- a/drivers/tty/isicom.c +++ b/drivers/tty/isicom.c @@ -148,7 +148,7 @@ #endif static int isicom_probe(struct pci_dev *, const struct pci_device_id *); -static void __devexit isicom_remove(struct pci_dev *); +static void isicom_remove(struct pci_dev *); static struct pci_device_id isicom_pci_tbl[] = { { PCI_DEVICE(VENDOR_ID, 0x2028) }, @@ -168,7 +168,7 @@ static struct pci_driver isicom_driver = { .name = "isicom", .id_table = isicom_pci_tbl, .probe = isicom_probe, - .remove = __devexit_p(isicom_remove) + .remove = isicom_remove }; static int prev_card = 3; /* start servicing isi_card[0] */ @@ -603,7 +603,7 @@ static irqreturn_t isicom_interrupt(int irq, void *dev_id) if (tty_port_cts_enabled(&port->port)) { if (tty->hw_stopped) { if (header & ISI_CTS) { - port->port.tty->hw_stopped = 0; + tty->hw_stopped = 0; /* start tx ing */ port->status |= (ISI_TXOK | ISI_CTS); @@ -1307,7 +1307,7 @@ static const struct tty_port_operations isicom_port_ops = { .shutdown = isicom_shutdown, }; -static int __devinit reset_card(struct pci_dev *pdev, +static int reset_card(struct pci_dev *pdev, const unsigned int card, unsigned int *signature) { struct isi_board *board = pci_get_drvdata(pdev); @@ -1368,7 +1368,7 @@ end: return retval; } -static int __devinit load_firmware(struct pci_dev *pdev, +static int load_firmware(struct pci_dev *pdev, const unsigned int index, const unsigned int signature) { struct isi_board *board = pci_get_drvdata(pdev); @@ -1548,7 +1548,7 @@ end: */ static unsigned int card_count; -static int __devinit isicom_probe(struct pci_dev *pdev, +static int isicom_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { unsigned int uninitialized_var(signature), index; @@ -1610,10 +1610,15 @@ static int __devinit isicom_probe(struct pci_dev *pdev, if (retval < 0) goto errunri; - for (index = 0; index < board->port_count; index++) - tty_port_register_device(&board->ports[index].port, - isicom_normal, board->index * 16 + index, - &pdev->dev); + for (index = 0; index < board->port_count; index++) { + struct tty_port *tport = &board->ports[index].port; + tty_port_init(tport); + tport->ops = &isicom_port_ops; + tport->close_delay = 50 * HZ/100; + tport->closing_wait = 3000 * HZ/100; + tty_port_register_device(tport, isicom_normal, + board->index * 16 + index, &pdev->dev); + } return 0; @@ -1630,13 +1635,15 @@ err: return retval; } -static void __devexit isicom_remove(struct pci_dev *pdev) +static void isicom_remove(struct pci_dev *pdev) { struct isi_board *board = pci_get_drvdata(pdev); unsigned int i; - for (i = 0; i < board->port_count; i++) + for (i = 0; i < board->port_count; i++) { tty_unregister_device(isicom_normal, board->index * 16 + i); + tty_port_destroy(&board->ports[i].port); + } free_irq(board->irq, board); pci_release_region(pdev, 3); @@ -1655,13 +1662,9 @@ static int __init isicom_init(void) isi_card[idx].ports = port; spin_lock_init(&isi_card[idx].card_lock); for (channel = 0; channel < 16; channel++, port++) { - tty_port_init(&port->port); - port->port.ops = &isicom_port_ops; port->magic = ISICOM_MAGIC; port->card = &isi_card[idx]; port->channel = channel; - port->port.close_delay = 50 * HZ/100; - port->port.closing_wait = 3000 * HZ/100; port->status = 0; /* . . . */ } diff --git a/drivers/tty/moxa.c b/drivers/tty/moxa.c index 56e616b9109..f9d28503bde 100644 --- a/drivers/tty/moxa.c +++ b/drivers/tty/moxa.c @@ -895,6 +895,8 @@ static int moxa_init_board(struct moxa_board_conf *brd, struct device *dev) return 0; err_free: + for (i = 0; i < MAX_PORTS_PER_BOARD; i++) + tty_port_destroy(&brd->ports[i].port); kfree(brd->ports); err: return ret; @@ -919,6 +921,8 @@ static void moxa_board_deinit(struct moxa_board_conf *brd) tty_kref_put(tty); } } + for (a = 0; a < MAX_PORTS_PER_BOARD; a++) + tty_port_destroy(&brd->ports[a].port); while (1) { opened = 0; for (a = 0; a < brd->numPorts; a++) @@ -941,7 +945,7 @@ static void moxa_board_deinit(struct moxa_board_conf *brd) } #ifdef CONFIG_PCI -static int __devinit moxa_pci_probe(struct pci_dev *pdev, +static int moxa_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { struct moxa_board_conf *board; @@ -1016,7 +1020,7 @@ err: return retval; } -static void __devexit moxa_pci_remove(struct pci_dev *pdev) +static void moxa_pci_remove(struct pci_dev *pdev) { struct moxa_board_conf *brd = pci_get_drvdata(pdev); @@ -1029,7 +1033,7 @@ static struct pci_driver moxa_pci_driver = { .name = "moxa", .id_table = moxa_pcibrds, .probe = moxa_pci_probe, - .remove = __devexit_p(moxa_pci_remove) + .remove = moxa_pci_remove }; #endif /* CONFIG_PCI */ @@ -1370,7 +1374,7 @@ static void moxa_new_dcdstate(struct moxa_port *p, u8 dcd) p->DCDState = dcd; spin_unlock_irqrestore(&p->port.lock, flags); tty = tty_port_tty_get(&p->port); - if (tty && C_CLOCAL(tty) && !dcd) + if (tty && !C_CLOCAL(tty) && !dcd) tty_hangup(tty); tty_kref_put(tty); } diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c index cfda47dabd2..40113868bec 100644 --- a/drivers/tty/mxser.c +++ b/drivers/tty/mxser.c @@ -487,7 +487,7 @@ static void mxser_disable_must_rx_software_flow_control(unsigned long baseio) } #ifdef CONFIG_PCI -static int __devinit CheckIsMoxaMust(unsigned long io) +static int CheckIsMoxaMust(unsigned long io) { u8 oldmcr, hwid; int i; @@ -2369,7 +2369,7 @@ static void mxser_release_ISA_res(struct mxser_board *brd) mxser_release_vector(brd); } -static int __devinit mxser_initbrd(struct mxser_board *brd, +static int mxser_initbrd(struct mxser_board *brd, struct pci_dev *pdev) { struct mxser_port *info; @@ -2411,14 +2411,27 @@ static int __devinit mxser_initbrd(struct mxser_board *brd, retval = request_irq(brd->irq, mxser_interrupt, IRQF_SHARED, "mxser", brd); - if (retval) + if (retval) { + for (i = 0; i < brd->info->nports; i++) + tty_port_destroy(&brd->ports[i].port); printk(KERN_ERR "Board %s: Request irq failed, IRQ (%d) may " "conflict with another device.\n", brd->info->name, brd->irq); + } return retval; } +static void mxser_board_remove(struct mxser_board *brd) +{ + unsigned int i; + + for (i = 0; i < brd->info->nports; i++) { + tty_unregister_device(mxvar_sdriver, brd->idx + i); + tty_port_destroy(&brd->ports[i].port); + } +} + static int __init mxser_get_ISA_conf(int cap, struct mxser_board *brd) { int id, i, bits, ret; @@ -2534,7 +2547,7 @@ err_irqconflict: return -EIO; } -static int __devinit mxser_probe(struct pci_dev *pdev, +static int mxser_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { #ifdef CONFIG_PCI @@ -2645,14 +2658,12 @@ err: #endif } -static void __devexit mxser_remove(struct pci_dev *pdev) +static void mxser_remove(struct pci_dev *pdev) { #ifdef CONFIG_PCI struct mxser_board *brd = pci_get_drvdata(pdev); - unsigned int i; - for (i = 0; i < brd->info->nports; i++) - tty_unregister_device(mxvar_sdriver, brd->idx + i); + mxser_board_remove(brd); free_irq(pdev->irq, brd); pci_release_region(pdev, 2); @@ -2666,7 +2677,7 @@ static struct pci_driver mxser_driver = { .name = "mxser", .id_table = mxser_pcibrds, .probe = mxser_probe, - .remove = __devexit_p(mxser_remove) + .remove = mxser_remove }; static int __init mxser_module_init(void) @@ -2748,15 +2759,13 @@ err_put: static void __exit mxser_module_exit(void) { - unsigned int i, j; + unsigned int i; pci_unregister_driver(&mxser_driver); for (i = 0; i < MXSER_BOARDS; i++) /* ISA remains */ if (mxser_boards[i].info != NULL) - for (j = 0; j < mxser_boards[i].info->nports; j++) - tty_unregister_device(mxvar_sdriver, - mxser_boards[i].idx + j); + mxser_board_remove(&mxser_boards[i]); tty_unregister_driver(mxvar_sdriver); put_tty_driver(mxvar_sdriver); diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index 1e8e8ce5595..dcc0430a49c 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -134,7 +134,6 @@ struct gsm_dlci { #define DLCI_OPENING 1 /* Sending SABM not seen UA */ #define DLCI_OPEN 2 /* SABM/UA complete */ #define DLCI_CLOSING 3 /* Sending DISC not seen UA/DM */ - struct kref ref; /* freed from port or mux close */ struct mutex mutex; /* Link layer */ @@ -1635,7 +1634,6 @@ static struct gsm_dlci *gsm_dlci_alloc(struct gsm_mux *gsm, int addr) if (dlci == NULL) return NULL; spin_lock_init(&dlci->lock); - kref_init(&dlci->ref); mutex_init(&dlci->mutex); dlci->fifo = &dlci->_fifo; if (kfifo_alloc(&dlci->_fifo, 4096, GFP_KERNEL) < 0) { @@ -1669,9 +1667,9 @@ static struct gsm_dlci *gsm_dlci_alloc(struct gsm_mux *gsm, int addr) * * Can sleep. */ -static void gsm_dlci_free(struct kref *ref) +static void gsm_dlci_free(struct tty_port *port) { - struct gsm_dlci *dlci = container_of(ref, struct gsm_dlci, ref); + struct gsm_dlci *dlci = container_of(port, struct gsm_dlci, port); del_timer_sync(&dlci->t1); dlci->gsm->dlci[dlci->addr] = NULL; @@ -1683,12 +1681,12 @@ static void gsm_dlci_free(struct kref *ref) static inline void dlci_get(struct gsm_dlci *dlci) { - kref_get(&dlci->ref); + tty_port_get(&dlci->port); } static inline void dlci_put(struct gsm_dlci *dlci) { - kref_put(&dlci->ref, gsm_dlci_free); + tty_port_put(&dlci->port); } /** @@ -2874,6 +2872,7 @@ static void gsm_dtr_rts(struct tty_port *port, int onoff) static const struct tty_port_operations gsm_port_ops = { .carrier_raised = gsm_carrier_raised, .dtr_rts = gsm_dtr_rts, + .destruct = gsm_dlci_free, }; static int gsmtty_install(struct tty_driver *driver, struct tty_struct *tty) diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 8c0b7b42319..19083efa231 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -73,10 +73,42 @@ #define ECHO_OP_SET_CANON_COL 0x81 #define ECHO_OP_ERASE_TAB 0x82 +struct n_tty_data { + unsigned int column; + unsigned long overrun_time; + int num_overrun; + + unsigned char lnext:1, erasing:1, raw:1, real_raw:1, icanon:1; + unsigned char echo_overrun:1; + + DECLARE_BITMAP(process_char_map, 256); + DECLARE_BITMAP(read_flags, N_TTY_BUF_SIZE); + + char *read_buf; + int read_head; + int read_tail; + int read_cnt; + + unsigned char *echo_buf; + unsigned int echo_pos; + unsigned int echo_cnt; + + int canon_data; + unsigned long canon_head; + unsigned int canon_column; + + struct mutex atomic_read_lock; + struct mutex output_lock; + struct mutex echo_lock; + spinlock_t read_lock; +}; + static inline int tty_put_user(struct tty_struct *tty, unsigned char x, unsigned char __user *ptr) { - tty_audit_add_data(tty, &x, 1); + struct n_tty_data *ldata = tty->disc_data; + + tty_audit_add_data(tty, &x, 1, ldata->icanon); return put_user(x, ptr); } @@ -92,17 +124,18 @@ static inline int tty_put_user(struct tty_struct *tty, unsigned char x, static void n_tty_set_room(struct tty_struct *tty) { + struct n_tty_data *ldata = tty->disc_data; int left; int old_left; - /* tty->read_cnt is not read locked ? */ + /* ldata->read_cnt is not read locked ? */ if (I_PARMRK(tty)) { /* Multiply read_cnt by 3, since each byte might take up to * three times as many spaces when PARMRK is set (depending on * its flags, e.g. parity error). */ - left = N_TTY_BUF_SIZE - tty->read_cnt * 3 - 1; + left = N_TTY_BUF_SIZE - ldata->read_cnt * 3 - 1; } else - left = N_TTY_BUF_SIZE - tty->read_cnt - 1; + left = N_TTY_BUF_SIZE - ldata->read_cnt - 1; /* * If we are doing input canonicalization, and there are no @@ -111,44 +144,47 @@ static void n_tty_set_room(struct tty_struct *tty) * characters will be beeped. */ if (left <= 0) - left = tty->icanon && !tty->canon_data; + left = ldata->icanon && !ldata->canon_data; old_left = tty->receive_room; tty->receive_room = left; /* Did this open up the receive buffer? We may need to flip */ - if (left && !old_left) - schedule_work(&tty->buf.work); + if (left && !old_left) { + WARN_RATELIMIT(tty->port->itty == NULL, + "scheduling with invalid itty\n"); + schedule_work(&tty->port->buf.work); + } } -static void put_tty_queue_nolock(unsigned char c, struct tty_struct *tty) +static void put_tty_queue_nolock(unsigned char c, struct n_tty_data *ldata) { - if (tty->read_cnt < N_TTY_BUF_SIZE) { - tty->read_buf[tty->read_head] = c; - tty->read_head = (tty->read_head + 1) & (N_TTY_BUF_SIZE-1); - tty->read_cnt++; + if (ldata->read_cnt < N_TTY_BUF_SIZE) { + ldata->read_buf[ldata->read_head] = c; + ldata->read_head = (ldata->read_head + 1) & (N_TTY_BUF_SIZE-1); + ldata->read_cnt++; } } /** * put_tty_queue - add character to tty * @c: character - * @tty: tty device + * @ldata: n_tty data * * Add a character to the tty read_buf queue. This is done under the * read_lock to serialize character addition and also to protect us * against parallel reads or flushes */ -static void put_tty_queue(unsigned char c, struct tty_struct *tty) +static void put_tty_queue(unsigned char c, struct n_tty_data *ldata) { unsigned long flags; /* * The problem of stomping on the buffers ends here. * Why didn't anyone see this one coming? --AJK */ - spin_lock_irqsave(&tty->read_lock, flags); - put_tty_queue_nolock(c, tty); - spin_unlock_irqrestore(&tty->read_lock, flags); + spin_lock_irqsave(&ldata->read_lock, flags); + put_tty_queue_nolock(c, ldata); + spin_unlock_irqrestore(&ldata->read_lock, flags); } /** @@ -179,18 +215,19 @@ static void check_unthrottle(struct tty_struct *tty) static void reset_buffer_flags(struct tty_struct *tty) { + struct n_tty_data *ldata = tty->disc_data; unsigned long flags; - spin_lock_irqsave(&tty->read_lock, flags); - tty->read_head = tty->read_tail = tty->read_cnt = 0; - spin_unlock_irqrestore(&tty->read_lock, flags); + spin_lock_irqsave(&ldata->read_lock, flags); + ldata->read_head = ldata->read_tail = ldata->read_cnt = 0; + spin_unlock_irqrestore(&ldata->read_lock, flags); - mutex_lock(&tty->echo_lock); - tty->echo_pos = tty->echo_cnt = tty->echo_overrun = 0; - mutex_unlock(&tty->echo_lock); + mutex_lock(&ldata->echo_lock); + ldata->echo_pos = ldata->echo_cnt = ldata->echo_overrun = 0; + mutex_unlock(&ldata->echo_lock); - tty->canon_head = tty->canon_data = tty->erasing = 0; - memset(&tty->read_flags, 0, sizeof tty->read_flags); + ldata->canon_head = ldata->canon_data = ldata->erasing = 0; + bitmap_zero(ldata->read_flags, N_TTY_BUF_SIZE); n_tty_set_room(tty); } @@ -235,18 +272,19 @@ static void n_tty_flush_buffer(struct tty_struct *tty) static ssize_t n_tty_chars_in_buffer(struct tty_struct *tty) { + struct n_tty_data *ldata = tty->disc_data; unsigned long flags; ssize_t n = 0; - spin_lock_irqsave(&tty->read_lock, flags); - if (!tty->icanon) { - n = tty->read_cnt; - } else if (tty->canon_data) { - n = (tty->canon_head > tty->read_tail) ? - tty->canon_head - tty->read_tail : - tty->canon_head + (N_TTY_BUF_SIZE - tty->read_tail); + spin_lock_irqsave(&ldata->read_lock, flags); + if (!ldata->icanon) { + n = ldata->read_cnt; + } else if (ldata->canon_data) { + n = (ldata->canon_head > ldata->read_tail) ? + ldata->canon_head - ldata->read_tail : + ldata->canon_head + (N_TTY_BUF_SIZE - ldata->read_tail); } - spin_unlock_irqrestore(&tty->read_lock, flags); + spin_unlock_irqrestore(&ldata->read_lock, flags); return n; } @@ -301,6 +339,7 @@ static inline int is_continuation(unsigned char c, struct tty_struct *tty) static int do_output_char(unsigned char c, struct tty_struct *tty, int space) { + struct n_tty_data *ldata = tty->disc_data; int spaces; if (!space) @@ -309,48 +348,48 @@ static int do_output_char(unsigned char c, struct tty_struct *tty, int space) switch (c) { case '\n': if (O_ONLRET(tty)) - tty->column = 0; + ldata->column = 0; if (O_ONLCR(tty)) { if (space < 2) return -1; - tty->canon_column = tty->column = 0; + ldata->canon_column = ldata->column = 0; tty->ops->write(tty, "\r\n", 2); return 2; } - tty->canon_column = tty->column; + ldata->canon_column = ldata->column; break; case '\r': - if (O_ONOCR(tty) && tty->column == 0) + if (O_ONOCR(tty) && ldata->column == 0) return 0; if (O_OCRNL(tty)) { c = '\n'; if (O_ONLRET(tty)) - tty->canon_column = tty->column = 0; + ldata->canon_column = ldata->column = 0; break; } - tty->canon_column = tty->column = 0; + ldata->canon_column = ldata->column = 0; break; case '\t': - spaces = 8 - (tty->column & 7); + spaces = 8 - (ldata->column & 7); if (O_TABDLY(tty) == XTABS) { if (space < spaces) return -1; - tty->column += spaces; + ldata->column += spaces; tty->ops->write(tty, " ", spaces); return spaces; } - tty->column += spaces; + ldata->column += spaces; break; case '\b': - if (tty->column > 0) - tty->column--; + if (ldata->column > 0) + ldata->column--; break; default: if (!iscntrl(c)) { if (O_OLCUC(tty)) c = toupper(c); if (!is_continuation(c, tty)) - tty->column++; + ldata->column++; } break; } @@ -375,14 +414,15 @@ static int do_output_char(unsigned char c, struct tty_struct *tty, int space) static int process_output(unsigned char c, struct tty_struct *tty) { + struct n_tty_data *ldata = tty->disc_data; int space, retval; - mutex_lock(&tty->output_lock); + mutex_lock(&ldata->output_lock); space = tty_write_room(tty); retval = do_output_char(c, tty, space); - mutex_unlock(&tty->output_lock); + mutex_unlock(&ldata->output_lock); if (retval < 0) return -1; else @@ -411,15 +451,16 @@ static int process_output(unsigned char c, struct tty_struct *tty) static ssize_t process_output_block(struct tty_struct *tty, const unsigned char *buf, unsigned int nr) { + struct n_tty_data *ldata = tty->disc_data; int space; int i; const unsigned char *cp; - mutex_lock(&tty->output_lock); + mutex_lock(&ldata->output_lock); space = tty_write_room(tty); if (!space) { - mutex_unlock(&tty->output_lock); + mutex_unlock(&ldata->output_lock); return 0; } if (nr > space) @@ -431,30 +472,30 @@ static ssize_t process_output_block(struct tty_struct *tty, switch (c) { case '\n': if (O_ONLRET(tty)) - tty->column = 0; + ldata->column = 0; if (O_ONLCR(tty)) goto break_out; - tty->canon_column = tty->column; + ldata->canon_column = ldata->column; break; case '\r': - if (O_ONOCR(tty) && tty->column == 0) + if (O_ONOCR(tty) && ldata->column == 0) goto break_out; if (O_OCRNL(tty)) goto break_out; - tty->canon_column = tty->column = 0; + ldata->canon_column = ldata->column = 0; break; case '\t': goto break_out; case '\b': - if (tty->column > 0) - tty->column--; + if (ldata->column > 0) + ldata->column--; break; default: if (!iscntrl(c)) { if (O_OLCUC(tty)) goto break_out; if (!is_continuation(c, tty)) - tty->column++; + ldata->column++; } break; } @@ -462,7 +503,7 @@ static ssize_t process_output_block(struct tty_struct *tty, break_out: i = tty->ops->write(tty, buf, i); - mutex_unlock(&tty->output_lock); + mutex_unlock(&ldata->output_lock); return i; } @@ -494,21 +535,22 @@ break_out: static void process_echoes(struct tty_struct *tty) { + struct n_tty_data *ldata = tty->disc_data; int space, nr; unsigned char c; unsigned char *cp, *buf_end; - if (!tty->echo_cnt) + if (!ldata->echo_cnt) return; - mutex_lock(&tty->output_lock); - mutex_lock(&tty->echo_lock); + mutex_lock(&ldata->output_lock); + mutex_lock(&ldata->echo_lock); space = tty_write_room(tty); - buf_end = tty->echo_buf + N_TTY_BUF_SIZE; - cp = tty->echo_buf + tty->echo_pos; - nr = tty->echo_cnt; + buf_end = ldata->echo_buf + N_TTY_BUF_SIZE; + cp = ldata->echo_buf + ldata->echo_pos; + nr = ldata->echo_cnt; while (nr > 0) { c = *cp; if (c == ECHO_OP_START) { @@ -545,7 +587,7 @@ static void process_echoes(struct tty_struct *tty) * Otherwise, tab spacing is normal. */ if (!(num_chars & 0x80)) - num_chars += tty->canon_column; + num_chars += ldata->canon_column; num_bs = 8 - (num_chars & 7); if (num_bs > space) { @@ -555,22 +597,22 @@ static void process_echoes(struct tty_struct *tty) space -= num_bs; while (num_bs--) { tty_put_char(tty, '\b'); - if (tty->column > 0) - tty->column--; + if (ldata->column > 0) + ldata->column--; } cp += 3; nr -= 3; break; case ECHO_OP_SET_CANON_COL: - tty->canon_column = tty->column; + ldata->canon_column = ldata->column; cp += 2; nr -= 2; break; case ECHO_OP_MOVE_BACK_COL: - if (tty->column > 0) - tty->column--; + if (ldata->column > 0) + ldata->column--; cp += 2; nr -= 2; break; @@ -582,7 +624,7 @@ static void process_echoes(struct tty_struct *tty) break; } tty_put_char(tty, ECHO_OP_START); - tty->column++; + ldata->column++; space--; cp += 2; nr -= 2; @@ -604,7 +646,7 @@ static void process_echoes(struct tty_struct *tty) } tty_put_char(tty, '^'); tty_put_char(tty, op ^ 0100); - tty->column += 2; + ldata->column += 2; space -= 2; cp += 2; nr -= 2; @@ -635,20 +677,20 @@ static void process_echoes(struct tty_struct *tty) } if (nr == 0) { - tty->echo_pos = 0; - tty->echo_cnt = 0; - tty->echo_overrun = 0; + ldata->echo_pos = 0; + ldata->echo_cnt = 0; + ldata->echo_overrun = 0; } else { - int num_processed = tty->echo_cnt - nr; - tty->echo_pos += num_processed; - tty->echo_pos &= N_TTY_BUF_SIZE - 1; - tty->echo_cnt = nr; + int num_processed = ldata->echo_cnt - nr; + ldata->echo_pos += num_processed; + ldata->echo_pos &= N_TTY_BUF_SIZE - 1; + ldata->echo_cnt = nr; if (num_processed > 0) - tty->echo_overrun = 0; + ldata->echo_overrun = 0; } - mutex_unlock(&tty->echo_lock); - mutex_unlock(&tty->output_lock); + mutex_unlock(&ldata->echo_lock); + mutex_unlock(&ldata->output_lock); if (tty->ops->flush_chars) tty->ops->flush_chars(tty); @@ -657,72 +699,70 @@ static void process_echoes(struct tty_struct *tty) /** * add_echo_byte - add a byte to the echo buffer * @c: unicode byte to echo - * @tty: terminal device + * @ldata: n_tty data * * Add a character or operation byte to the echo buffer. * * Should be called under the echo lock to protect the echo buffer. */ -static void add_echo_byte(unsigned char c, struct tty_struct *tty) +static void add_echo_byte(unsigned char c, struct n_tty_data *ldata) { int new_byte_pos; - if (tty->echo_cnt == N_TTY_BUF_SIZE) { + if (ldata->echo_cnt == N_TTY_BUF_SIZE) { /* Circular buffer is already at capacity */ - new_byte_pos = tty->echo_pos; + new_byte_pos = ldata->echo_pos; /* * Since the buffer start position needs to be advanced, * be sure to step by a whole operation byte group. */ - if (tty->echo_buf[tty->echo_pos] == ECHO_OP_START) { - if (tty->echo_buf[(tty->echo_pos + 1) & + if (ldata->echo_buf[ldata->echo_pos] == ECHO_OP_START) { + if (ldata->echo_buf[(ldata->echo_pos + 1) & (N_TTY_BUF_SIZE - 1)] == ECHO_OP_ERASE_TAB) { - tty->echo_pos += 3; - tty->echo_cnt -= 2; + ldata->echo_pos += 3; + ldata->echo_cnt -= 2; } else { - tty->echo_pos += 2; - tty->echo_cnt -= 1; + ldata->echo_pos += 2; + ldata->echo_cnt -= 1; } } else { - tty->echo_pos++; + ldata->echo_pos++; } - tty->echo_pos &= N_TTY_BUF_SIZE - 1; + ldata->echo_pos &= N_TTY_BUF_SIZE - 1; - tty->echo_overrun = 1; + ldata->echo_overrun = 1; } else { - new_byte_pos = tty->echo_pos + tty->echo_cnt; + new_byte_pos = ldata->echo_pos + ldata->echo_cnt; new_byte_pos &= N_TTY_BUF_SIZE - 1; - tty->echo_cnt++; + ldata->echo_cnt++; } - tty->echo_buf[new_byte_pos] = c; + ldata->echo_buf[new_byte_pos] = c; } /** * echo_move_back_col - add operation to move back a column - * @tty: terminal device + * @ldata: n_tty data * * Add an operation to the echo buffer to move back one column. * * Locking: echo_lock to protect the echo buffer */ -static void echo_move_back_col(struct tty_struct *tty) +static void echo_move_back_col(struct n_tty_data *ldata) { - mutex_lock(&tty->echo_lock); - - add_echo_byte(ECHO_OP_START, tty); - add_echo_byte(ECHO_OP_MOVE_BACK_COL, tty); - - mutex_unlock(&tty->echo_lock); + mutex_lock(&ldata->echo_lock); + add_echo_byte(ECHO_OP_START, ldata); + add_echo_byte(ECHO_OP_MOVE_BACK_COL, ldata); + mutex_unlock(&ldata->echo_lock); } /** * echo_set_canon_col - add operation to set the canon column - * @tty: terminal device + * @ldata: n_tty data * * Add an operation to the echo buffer to set the canon column * to the current column. @@ -730,21 +770,19 @@ static void echo_move_back_col(struct tty_struct *tty) * Locking: echo_lock to protect the echo buffer */ -static void echo_set_canon_col(struct tty_struct *tty) +static void echo_set_canon_col(struct n_tty_data *ldata) { - mutex_lock(&tty->echo_lock); - - add_echo_byte(ECHO_OP_START, tty); - add_echo_byte(ECHO_OP_SET_CANON_COL, tty); - - mutex_unlock(&tty->echo_lock); + mutex_lock(&ldata->echo_lock); + add_echo_byte(ECHO_OP_START, ldata); + add_echo_byte(ECHO_OP_SET_CANON_COL, ldata); + mutex_unlock(&ldata->echo_lock); } /** * echo_erase_tab - add operation to erase a tab * @num_chars: number of character columns already used * @after_tab: true if num_chars starts after a previous tab - * @tty: terminal device + * @ldata: n_tty data * * Add an operation to the echo buffer to erase a tab. * @@ -758,12 +796,12 @@ static void echo_set_canon_col(struct tty_struct *tty) */ static void echo_erase_tab(unsigned int num_chars, int after_tab, - struct tty_struct *tty) + struct n_tty_data *ldata) { - mutex_lock(&tty->echo_lock); + mutex_lock(&ldata->echo_lock); - add_echo_byte(ECHO_OP_START, tty); - add_echo_byte(ECHO_OP_ERASE_TAB, tty); + add_echo_byte(ECHO_OP_START, ldata); + add_echo_byte(ECHO_OP_ERASE_TAB, ldata); /* We only need to know this modulo 8 (tab spacing) */ num_chars &= 7; @@ -772,9 +810,9 @@ static void echo_erase_tab(unsigned int num_chars, int after_tab, if (after_tab) num_chars |= 0x80; - add_echo_byte(num_chars, tty); + add_echo_byte(num_chars, ldata); - mutex_unlock(&tty->echo_lock); + mutex_unlock(&ldata->echo_lock); } /** @@ -790,18 +828,16 @@ static void echo_erase_tab(unsigned int num_chars, int after_tab, * Locking: echo_lock to protect the echo buffer */ -static void echo_char_raw(unsigned char c, struct tty_struct *tty) +static void echo_char_raw(unsigned char c, struct n_tty_data *ldata) { - mutex_lock(&tty->echo_lock); - + mutex_lock(&ldata->echo_lock); if (c == ECHO_OP_START) { - add_echo_byte(ECHO_OP_START, tty); - add_echo_byte(ECHO_OP_START, tty); + add_echo_byte(ECHO_OP_START, ldata); + add_echo_byte(ECHO_OP_START, ldata); } else { - add_echo_byte(c, tty); + add_echo_byte(c, ldata); } - - mutex_unlock(&tty->echo_lock); + mutex_unlock(&ldata->echo_lock); } /** @@ -820,30 +856,32 @@ static void echo_char_raw(unsigned char c, struct tty_struct *tty) static void echo_char(unsigned char c, struct tty_struct *tty) { - mutex_lock(&tty->echo_lock); + struct n_tty_data *ldata = tty->disc_data; + + mutex_lock(&ldata->echo_lock); if (c == ECHO_OP_START) { - add_echo_byte(ECHO_OP_START, tty); - add_echo_byte(ECHO_OP_START, tty); + add_echo_byte(ECHO_OP_START, ldata); + add_echo_byte(ECHO_OP_START, ldata); } else { if (L_ECHOCTL(tty) && iscntrl(c) && c != '\t') - add_echo_byte(ECHO_OP_START, tty); - add_echo_byte(c, tty); + add_echo_byte(ECHO_OP_START, ldata); + add_echo_byte(c, ldata); } - mutex_unlock(&tty->echo_lock); + mutex_unlock(&ldata->echo_lock); } /** * finish_erasing - complete erase - * @tty: tty doing the erase + * @ldata: n_tty data */ -static inline void finish_erasing(struct tty_struct *tty) +static inline void finish_erasing(struct n_tty_data *ldata) { - if (tty->erasing) { - echo_char_raw('/', tty); - tty->erasing = 0; + if (ldata->erasing) { + echo_char_raw('/', ldata); + ldata->erasing = 0; } } @@ -861,12 +899,13 @@ static inline void finish_erasing(struct tty_struct *tty) static void eraser(unsigned char c, struct tty_struct *tty) { + struct n_tty_data *ldata = tty->disc_data; enum { ERASE, WERASE, KILL } kill_type; int head, seen_alnums, cnt; unsigned long flags; /* FIXME: locking needed ? */ - if (tty->read_head == tty->canon_head) { + if (ldata->read_head == ldata->canon_head) { /* process_output('\a', tty); */ /* what do you think? */ return; } @@ -876,24 +915,24 @@ static void eraser(unsigned char c, struct tty_struct *tty) kill_type = WERASE; else { if (!L_ECHO(tty)) { - spin_lock_irqsave(&tty->read_lock, flags); - tty->read_cnt -= ((tty->read_head - tty->canon_head) & + spin_lock_irqsave(&ldata->read_lock, flags); + ldata->read_cnt -= ((ldata->read_head - ldata->canon_head) & (N_TTY_BUF_SIZE - 1)); - tty->read_head = tty->canon_head; - spin_unlock_irqrestore(&tty->read_lock, flags); + ldata->read_head = ldata->canon_head; + spin_unlock_irqrestore(&ldata->read_lock, flags); return; } if (!L_ECHOK(tty) || !L_ECHOKE(tty) || !L_ECHOE(tty)) { - spin_lock_irqsave(&tty->read_lock, flags); - tty->read_cnt -= ((tty->read_head - tty->canon_head) & + spin_lock_irqsave(&ldata->read_lock, flags); + ldata->read_cnt -= ((ldata->read_head - ldata->canon_head) & (N_TTY_BUF_SIZE - 1)); - tty->read_head = tty->canon_head; - spin_unlock_irqrestore(&tty->read_lock, flags); - finish_erasing(tty); + ldata->read_head = ldata->canon_head; + spin_unlock_irqrestore(&ldata->read_lock, flags); + finish_erasing(ldata); echo_char(KILL_CHAR(tty), tty); /* Add a newline if ECHOK is on and ECHOKE is off. */ if (L_ECHOK(tty)) - echo_char_raw('\n', tty); + echo_char_raw('\n', ldata); return; } kill_type = KILL; @@ -901,14 +940,14 @@ static void eraser(unsigned char c, struct tty_struct *tty) seen_alnums = 0; /* FIXME: Locking ?? */ - while (tty->read_head != tty->canon_head) { - head = tty->read_head; + while (ldata->read_head != ldata->canon_head) { + head = ldata->read_head; /* erase a single possibly multibyte character */ do { head = (head - 1) & (N_TTY_BUF_SIZE-1); - c = tty->read_buf[head]; - } while (is_continuation(c, tty) && head != tty->canon_head); + c = ldata->read_buf[head]; + } while (is_continuation(c, tty) && head != ldata->canon_head); /* do not partially erase */ if (is_continuation(c, tty)) @@ -921,30 +960,31 @@ static void eraser(unsigned char c, struct tty_struct *tty) else if (seen_alnums) break; } - cnt = (tty->read_head - head) & (N_TTY_BUF_SIZE-1); - spin_lock_irqsave(&tty->read_lock, flags); - tty->read_head = head; - tty->read_cnt -= cnt; - spin_unlock_irqrestore(&tty->read_lock, flags); + cnt = (ldata->read_head - head) & (N_TTY_BUF_SIZE-1); + spin_lock_irqsave(&ldata->read_lock, flags); + ldata->read_head = head; + ldata->read_cnt -= cnt; + spin_unlock_irqrestore(&ldata->read_lock, flags); if (L_ECHO(tty)) { if (L_ECHOPRT(tty)) { - if (!tty->erasing) { - echo_char_raw('\\', tty); - tty->erasing = 1; + if (!ldata->erasing) { + echo_char_raw('\\', ldata); + ldata->erasing = 1; } /* if cnt > 1, output a multi-byte character */ echo_char(c, tty); while (--cnt > 0) { head = (head+1) & (N_TTY_BUF_SIZE-1); - echo_char_raw(tty->read_buf[head], tty); - echo_move_back_col(tty); + echo_char_raw(ldata->read_buf[head], + ldata); + echo_move_back_col(ldata); } } else if (kill_type == ERASE && !L_ECHOE(tty)) { echo_char(ERASE_CHAR(tty), tty); } else if (c == '\t') { unsigned int num_chars = 0; int after_tab = 0; - unsigned long tail = tty->read_head; + unsigned long tail = ldata->read_head; /* * Count the columns used for characters @@ -953,9 +993,9 @@ static void eraser(unsigned char c, struct tty_struct *tty) * This info is used to go back the correct * number of columns. */ - while (tail != tty->canon_head) { + while (tail != ldata->canon_head) { tail = (tail-1) & (N_TTY_BUF_SIZE-1); - c = tty->read_buf[tail]; + c = ldata->read_buf[tail]; if (c == '\t') { after_tab = 1; break; @@ -966,25 +1006,25 @@ static void eraser(unsigned char c, struct tty_struct *tty) num_chars++; } } - echo_erase_tab(num_chars, after_tab, tty); + echo_erase_tab(num_chars, after_tab, ldata); } else { if (iscntrl(c) && L_ECHOCTL(tty)) { - echo_char_raw('\b', tty); - echo_char_raw(' ', tty); - echo_char_raw('\b', tty); + echo_char_raw('\b', ldata); + echo_char_raw(' ', ldata); + echo_char_raw('\b', ldata); } if (!iscntrl(c) || L_ECHOCTL(tty)) { - echo_char_raw('\b', tty); - echo_char_raw(' ', tty); - echo_char_raw('\b', tty); + echo_char_raw('\b', ldata); + echo_char_raw(' ', ldata); + echo_char_raw('\b', ldata); } } } if (kill_type == ERASE) break; } - if (tty->read_head == tty->canon_head && L_ECHO(tty)) - finish_erasing(tty); + if (ldata->read_head == ldata->canon_head && L_ECHO(tty)) + finish_erasing(ldata); } /** @@ -1023,6 +1063,8 @@ static inline void isig(int sig, struct tty_struct *tty, int flush) static inline void n_tty_receive_break(struct tty_struct *tty) { + struct n_tty_data *ldata = tty->disc_data; + if (I_IGNBRK(tty)) return; if (I_BRKINT(tty)) { @@ -1030,10 +1072,10 @@ static inline void n_tty_receive_break(struct tty_struct *tty) return; } if (I_PARMRK(tty)) { - put_tty_queue('\377', tty); - put_tty_queue('\0', tty); + put_tty_queue('\377', ldata); + put_tty_queue('\0', ldata); } - put_tty_queue('\0', tty); + put_tty_queue('\0', ldata); wake_up_interruptible(&tty->read_wait); } @@ -1052,16 +1094,17 @@ static inline void n_tty_receive_break(struct tty_struct *tty) static inline void n_tty_receive_overrun(struct tty_struct *tty) { + struct n_tty_data *ldata = tty->disc_data; char buf[64]; - tty->num_overrun++; - if (time_before(tty->overrun_time, jiffies - HZ) || - time_after(tty->overrun_time, jiffies)) { + ldata->num_overrun++; + if (time_after(jiffies, ldata->overrun_time + HZ) || + time_after(ldata->overrun_time, jiffies)) { printk(KERN_WARNING "%s: %d input overrun(s)\n", tty_name(tty, buf), - tty->num_overrun); - tty->overrun_time = jiffies; - tty->num_overrun = 0; + ldata->num_overrun); + ldata->overrun_time = jiffies; + ldata->num_overrun = 0; } } @@ -1076,16 +1119,18 @@ static inline void n_tty_receive_overrun(struct tty_struct *tty) static inline void n_tty_receive_parity_error(struct tty_struct *tty, unsigned char c) { + struct n_tty_data *ldata = tty->disc_data; + if (I_IGNPAR(tty)) return; if (I_PARMRK(tty)) { - put_tty_queue('\377', tty); - put_tty_queue('\0', tty); - put_tty_queue(c, tty); + put_tty_queue('\377', ldata); + put_tty_queue('\0', ldata); + put_tty_queue(c, ldata); } else if (I_INPCK(tty)) - put_tty_queue('\0', tty); + put_tty_queue('\0', ldata); else - put_tty_queue(c, tty); + put_tty_queue(c, ldata); wake_up_interruptible(&tty->read_wait); } @@ -1101,11 +1146,12 @@ static inline void n_tty_receive_parity_error(struct tty_struct *tty, static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c) { + struct n_tty_data *ldata = tty->disc_data; unsigned long flags; int parmrk; - if (tty->raw) { - put_tty_queue(c, tty); + if (ldata->raw) { + put_tty_queue(c, ldata); return; } @@ -1115,7 +1161,7 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c) c = tolower(c); if (L_EXTPROC(tty)) { - put_tty_queue(c, tty); + put_tty_queue(c, ldata); return; } @@ -1143,26 +1189,26 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c) * handle specially, do shortcut processing to speed things * up. */ - if (!test_bit(c, tty->process_char_map) || tty->lnext) { - tty->lnext = 0; + if (!test_bit(c, ldata->process_char_map) || ldata->lnext) { + ldata->lnext = 0; parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0; - if (tty->read_cnt >= (N_TTY_BUF_SIZE - parmrk - 1)) { + if (ldata->read_cnt >= (N_TTY_BUF_SIZE - parmrk - 1)) { /* beep if no space */ if (L_ECHO(tty)) process_output('\a', tty); return; } if (L_ECHO(tty)) { - finish_erasing(tty); + finish_erasing(ldata); /* Record the column of first canon char. */ - if (tty->canon_head == tty->read_head) - echo_set_canon_col(tty); + if (ldata->canon_head == ldata->read_head) + echo_set_canon_col(ldata); echo_char(c, tty); process_echoes(tty); } if (parmrk) - put_tty_queue(c, tty); - put_tty_queue(c, tty); + put_tty_queue(c, ldata); + put_tty_queue(c, ldata); return; } @@ -1218,7 +1264,7 @@ send_signal: } else if (c == '\n' && I_INLCR(tty)) c = '\r'; - if (tty->icanon) { + if (ldata->icanon) { if (c == ERASE_CHAR(tty) || c == KILL_CHAR(tty) || (c == WERASE_CHAR(tty) && L_IEXTEN(tty))) { eraser(c, tty); @@ -1226,12 +1272,12 @@ send_signal: return; } if (c == LNEXT_CHAR(tty) && L_IEXTEN(tty)) { - tty->lnext = 1; + ldata->lnext = 1; if (L_ECHO(tty)) { - finish_erasing(tty); + finish_erasing(ldata); if (L_ECHOCTL(tty)) { - echo_char_raw('^', tty); - echo_char_raw('\b', tty); + echo_char_raw('^', ldata); + echo_char_raw('\b', ldata); process_echoes(tty); } } @@ -1239,34 +1285,34 @@ send_signal: } if (c == REPRINT_CHAR(tty) && L_ECHO(tty) && L_IEXTEN(tty)) { - unsigned long tail = tty->canon_head; + unsigned long tail = ldata->canon_head; - finish_erasing(tty); + finish_erasing(ldata); echo_char(c, tty); - echo_char_raw('\n', tty); - while (tail != tty->read_head) { - echo_char(tty->read_buf[tail], tty); + echo_char_raw('\n', ldata); + while (tail != ldata->read_head) { + echo_char(ldata->read_buf[tail], tty); tail = (tail+1) & (N_TTY_BUF_SIZE-1); } process_echoes(tty); return; } if (c == '\n') { - if (tty->read_cnt >= N_TTY_BUF_SIZE) { + if (ldata->read_cnt >= N_TTY_BUF_SIZE) { if (L_ECHO(tty)) process_output('\a', tty); return; } if (L_ECHO(tty) || L_ECHONL(tty)) { - echo_char_raw('\n', tty); + echo_char_raw('\n', ldata); process_echoes(tty); } goto handle_newline; } if (c == EOF_CHAR(tty)) { - if (tty->read_cnt >= N_TTY_BUF_SIZE) + if (ldata->read_cnt >= N_TTY_BUF_SIZE) return; - if (tty->canon_head != tty->read_head) + if (ldata->canon_head != ldata->read_head) set_bit(TTY_PUSH, &tty->flags); c = __DISABLED_CHAR; goto handle_newline; @@ -1275,7 +1321,7 @@ send_signal: (c == EOL2_CHAR(tty) && L_IEXTEN(tty))) { parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0; - if (tty->read_cnt >= (N_TTY_BUF_SIZE - parmrk)) { + if (ldata->read_cnt >= (N_TTY_BUF_SIZE - parmrk)) { if (L_ECHO(tty)) process_output('\a', tty); return; @@ -1285,8 +1331,8 @@ send_signal: */ if (L_ECHO(tty)) { /* Record the column of first canon char. */ - if (tty->canon_head == tty->read_head) - echo_set_canon_col(tty); + if (ldata->canon_head == ldata->read_head) + echo_set_canon_col(ldata); echo_char(c, tty); process_echoes(tty); } @@ -1295,15 +1341,15 @@ send_signal: * EOL_CHAR and EOL2_CHAR? */ if (parmrk) - put_tty_queue(c, tty); + put_tty_queue(c, ldata); handle_newline: - spin_lock_irqsave(&tty->read_lock, flags); - set_bit(tty->read_head, tty->read_flags); - put_tty_queue_nolock(c, tty); - tty->canon_head = tty->read_head; - tty->canon_data++; - spin_unlock_irqrestore(&tty->read_lock, flags); + spin_lock_irqsave(&ldata->read_lock, flags); + set_bit(ldata->read_head, ldata->read_flags); + put_tty_queue_nolock(c, ldata); + ldata->canon_head = ldata->read_head; + ldata->canon_data++; + spin_unlock_irqrestore(&ldata->read_lock, flags); kill_fasync(&tty->fasync, SIGIO, POLL_IN); if (waitqueue_active(&tty->read_wait)) wake_up_interruptible(&tty->read_wait); @@ -1312,29 +1358,29 @@ handle_newline: } parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0; - if (tty->read_cnt >= (N_TTY_BUF_SIZE - parmrk - 1)) { + if (ldata->read_cnt >= (N_TTY_BUF_SIZE - parmrk - 1)) { /* beep if no space */ if (L_ECHO(tty)) process_output('\a', tty); return; } if (L_ECHO(tty)) { - finish_erasing(tty); + finish_erasing(ldata); if (c == '\n') - echo_char_raw('\n', tty); + echo_char_raw('\n', ldata); else { /* Record the column of first canon char. */ - if (tty->canon_head == tty->read_head) - echo_set_canon_col(tty); + if (ldata->canon_head == ldata->read_head) + echo_set_canon_col(ldata); echo_char(c, tty); } process_echoes(tty); } if (parmrk) - put_tty_queue(c, tty); + put_tty_queue(c, ldata); - put_tty_queue(c, tty); + put_tty_queue(c, ldata); } @@ -1369,33 +1415,31 @@ static void n_tty_write_wakeup(struct tty_struct *tty) static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp, char *fp, int count) { + struct n_tty_data *ldata = tty->disc_data; const unsigned char *p; char *f, flags = TTY_NORMAL; int i; char buf[64]; unsigned long cpuflags; - if (!tty->read_buf) - return; - - if (tty->real_raw) { - spin_lock_irqsave(&tty->read_lock, cpuflags); - i = min(N_TTY_BUF_SIZE - tty->read_cnt, - N_TTY_BUF_SIZE - tty->read_head); + if (ldata->real_raw) { + spin_lock_irqsave(&ldata->read_lock, cpuflags); + i = min(N_TTY_BUF_SIZE - ldata->read_cnt, + N_TTY_BUF_SIZE - ldata->read_head); i = min(count, i); - memcpy(tty->read_buf + tty->read_head, cp, i); - tty->read_head = (tty->read_head + i) & (N_TTY_BUF_SIZE-1); - tty->read_cnt += i; + memcpy(ldata->read_buf + ldata->read_head, cp, i); + ldata->read_head = (ldata->read_head + i) & (N_TTY_BUF_SIZE-1); + ldata->read_cnt += i; cp += i; count -= i; - i = min(N_TTY_BUF_SIZE - tty->read_cnt, - N_TTY_BUF_SIZE - tty->read_head); + i = min(N_TTY_BUF_SIZE - ldata->read_cnt, + N_TTY_BUF_SIZE - ldata->read_head); i = min(count, i); - memcpy(tty->read_buf + tty->read_head, cp, i); - tty->read_head = (tty->read_head + i) & (N_TTY_BUF_SIZE-1); - tty->read_cnt += i; - spin_unlock_irqrestore(&tty->read_lock, cpuflags); + memcpy(ldata->read_buf + ldata->read_head, cp, i); + ldata->read_head = (ldata->read_head + i) & (N_TTY_BUF_SIZE-1); + ldata->read_cnt += i; + spin_unlock_irqrestore(&ldata->read_lock, cpuflags); } else { for (i = count, p = cp, f = fp; i; i--, p++) { if (f) @@ -1426,7 +1470,7 @@ static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp, n_tty_set_room(tty); - if ((!tty->icanon && (tty->read_cnt >= tty->minimum_to_wake)) || + if ((!ldata->icanon && (ldata->read_cnt >= tty->minimum_to_wake)) || L_EXTPROC(tty)) { kill_fasync(&tty->fasync, SIGIO, POLL_IN); if (waitqueue_active(&tty->read_wait)) @@ -1470,25 +1514,25 @@ int is_ignored(int sig) static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old) { + struct n_tty_data *ldata = tty->disc_data; int canon_change = 1; - BUG_ON(!tty); if (old) canon_change = (old->c_lflag ^ tty->termios.c_lflag) & ICANON; if (canon_change) { - memset(&tty->read_flags, 0, sizeof tty->read_flags); - tty->canon_head = tty->read_tail; - tty->canon_data = 0; - tty->erasing = 0; + bitmap_zero(ldata->read_flags, N_TTY_BUF_SIZE); + ldata->canon_head = ldata->read_tail; + ldata->canon_data = 0; + ldata->erasing = 0; } - if (canon_change && !L_ICANON(tty) && tty->read_cnt) + if (canon_change && !L_ICANON(tty) && ldata->read_cnt) wake_up_interruptible(&tty->read_wait); - tty->icanon = (L_ICANON(tty) != 0); + ldata->icanon = (L_ICANON(tty) != 0); if (test_bit(TTY_HW_COOK_IN, &tty->flags)) { - tty->raw = 1; - tty->real_raw = 1; + ldata->raw = 1; + ldata->real_raw = 1; n_tty_set_room(tty); return; } @@ -1496,51 +1540,51 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old) I_ICRNL(tty) || I_INLCR(tty) || L_ICANON(tty) || I_IXON(tty) || L_ISIG(tty) || L_ECHO(tty) || I_PARMRK(tty)) { - memset(tty->process_char_map, 0, 256/8); + bitmap_zero(ldata->process_char_map, 256); if (I_IGNCR(tty) || I_ICRNL(tty)) - set_bit('\r', tty->process_char_map); + set_bit('\r', ldata->process_char_map); if (I_INLCR(tty)) - set_bit('\n', tty->process_char_map); + set_bit('\n', ldata->process_char_map); if (L_ICANON(tty)) { - set_bit(ERASE_CHAR(tty), tty->process_char_map); - set_bit(KILL_CHAR(tty), tty->process_char_map); - set_bit(EOF_CHAR(tty), tty->process_char_map); - set_bit('\n', tty->process_char_map); - set_bit(EOL_CHAR(tty), tty->process_char_map); + set_bit(ERASE_CHAR(tty), ldata->process_char_map); + set_bit(KILL_CHAR(tty), ldata->process_char_map); + set_bit(EOF_CHAR(tty), ldata->process_char_map); + set_bit('\n', ldata->process_char_map); + set_bit(EOL_CHAR(tty), ldata->process_char_map); if (L_IEXTEN(tty)) { set_bit(WERASE_CHAR(tty), - tty->process_char_map); + ldata->process_char_map); set_bit(LNEXT_CHAR(tty), - tty->process_char_map); + ldata->process_char_map); set_bit(EOL2_CHAR(tty), - tty->process_char_map); + ldata->process_char_map); if (L_ECHO(tty)) set_bit(REPRINT_CHAR(tty), - tty->process_char_map); + ldata->process_char_map); } } if (I_IXON(tty)) { - set_bit(START_CHAR(tty), tty->process_char_map); - set_bit(STOP_CHAR(tty), tty->process_char_map); + set_bit(START_CHAR(tty), ldata->process_char_map); + set_bit(STOP_CHAR(tty), ldata->process_char_map); } if (L_ISIG(tty)) { - set_bit(INTR_CHAR(tty), tty->process_char_map); - set_bit(QUIT_CHAR(tty), tty->process_char_map); - set_bit(SUSP_CHAR(tty), tty->process_char_map); + set_bit(INTR_CHAR(tty), ldata->process_char_map); + set_bit(QUIT_CHAR(tty), ldata->process_char_map); + set_bit(SUSP_CHAR(tty), ldata->process_char_map); } - clear_bit(__DISABLED_CHAR, tty->process_char_map); - tty->raw = 0; - tty->real_raw = 0; + clear_bit(__DISABLED_CHAR, ldata->process_char_map); + ldata->raw = 0; + ldata->real_raw = 0; } else { - tty->raw = 1; + ldata->raw = 1; if ((I_IGNBRK(tty) || (!I_BRKINT(tty) && !I_PARMRK(tty))) && (I_IGNPAR(tty) || !I_INPCK(tty)) && (tty->driver->flags & TTY_DRIVER_REAL_RAW)) - tty->real_raw = 1; + ldata->real_raw = 1; else - tty->real_raw = 0; + ldata->real_raw = 0; } n_tty_set_room(tty); /* The termios change make the tty ready for I/O */ @@ -1560,15 +1604,13 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old) static void n_tty_close(struct tty_struct *tty) { + struct n_tty_data *ldata = tty->disc_data; + n_tty_flush_buffer(tty); - if (tty->read_buf) { - kfree(tty->read_buf); - tty->read_buf = NULL; - } - if (tty->echo_buf) { - kfree(tty->echo_buf); - tty->echo_buf = NULL; - } + kfree(ldata->read_buf); + kfree(ldata->echo_buf); + kfree(ldata); + tty->disc_data = NULL; } /** @@ -1583,37 +1625,50 @@ static void n_tty_close(struct tty_struct *tty) static int n_tty_open(struct tty_struct *tty) { - if (!tty) - return -EINVAL; + struct n_tty_data *ldata; + + ldata = kzalloc(sizeof(*ldata), GFP_KERNEL); + if (!ldata) + goto err; + + ldata->overrun_time = jiffies; + mutex_init(&ldata->atomic_read_lock); + mutex_init(&ldata->output_lock); + mutex_init(&ldata->echo_lock); + spin_lock_init(&ldata->read_lock); /* These are ugly. Currently a malloc failure here can panic */ - if (!tty->read_buf) { - tty->read_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL); - if (!tty->read_buf) - return -ENOMEM; - } - if (!tty->echo_buf) { - tty->echo_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL); + ldata->read_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL); + ldata->echo_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL); + if (!ldata->read_buf || !ldata->echo_buf) + goto err_free_bufs; - if (!tty->echo_buf) - return -ENOMEM; - } + tty->disc_data = ldata; reset_buffer_flags(tty); tty_unthrottle(tty); - tty->column = 0; + ldata->column = 0; n_tty_set_termios(tty, NULL); tty->minimum_to_wake = 1; tty->closing = 0; + return 0; +err_free_bufs: + kfree(ldata->read_buf); + kfree(ldata->echo_buf); + kfree(ldata); +err: + return -ENOMEM; } static inline int input_available_p(struct tty_struct *tty, int amt) { + struct n_tty_data *ldata = tty->disc_data; + tty_flush_to_ldisc(tty); - if (tty->icanon && !L_EXTPROC(tty)) { - if (tty->canon_data) + if (ldata->icanon && !L_EXTPROC(tty)) { + if (ldata->canon_data) return 1; - } else if (tty->read_cnt >= (amt ? amt : 1)) + } else if (ldata->read_cnt >= (amt ? amt : 1)) return 1; return 0; @@ -1632,7 +1687,7 @@ static inline int input_available_p(struct tty_struct *tty, int amt) * buffer, and once to drain the space from the (physical) beginning of * the buffer to head pointer. * - * Called under the tty->atomic_read_lock sem + * Called under the ldata->atomic_read_lock sem * */ @@ -1641,29 +1696,31 @@ static int copy_from_read_buf(struct tty_struct *tty, size_t *nr) { + struct n_tty_data *ldata = tty->disc_data; int retval; size_t n; unsigned long flags; bool is_eof; retval = 0; - spin_lock_irqsave(&tty->read_lock, flags); - n = min(tty->read_cnt, N_TTY_BUF_SIZE - tty->read_tail); + spin_lock_irqsave(&ldata->read_lock, flags); + n = min(ldata->read_cnt, N_TTY_BUF_SIZE - ldata->read_tail); n = min(*nr, n); - spin_unlock_irqrestore(&tty->read_lock, flags); + spin_unlock_irqrestore(&ldata->read_lock, flags); if (n) { - retval = copy_to_user(*b, &tty->read_buf[tty->read_tail], n); + retval = copy_to_user(*b, &ldata->read_buf[ldata->read_tail], n); n -= retval; is_eof = n == 1 && - tty->read_buf[tty->read_tail] == EOF_CHAR(tty); - tty_audit_add_data(tty, &tty->read_buf[tty->read_tail], n); - spin_lock_irqsave(&tty->read_lock, flags); - tty->read_tail = (tty->read_tail + n) & (N_TTY_BUF_SIZE-1); - tty->read_cnt -= n; + ldata->read_buf[ldata->read_tail] == EOF_CHAR(tty); + tty_audit_add_data(tty, &ldata->read_buf[ldata->read_tail], n, + ldata->icanon); + spin_lock_irqsave(&ldata->read_lock, flags); + ldata->read_tail = (ldata->read_tail + n) & (N_TTY_BUF_SIZE-1); + ldata->read_cnt -= n; /* Turn single EOF into zero-length read */ - if (L_EXTPROC(tty) && tty->icanon && is_eof && !tty->read_cnt) + if (L_EXTPROC(tty) && ldata->icanon && is_eof && !ldata->read_cnt) n = 0; - spin_unlock_irqrestore(&tty->read_lock, flags); + spin_unlock_irqrestore(&ldata->read_lock, flags); *b += n; *nr -= n; } @@ -1730,6 +1787,7 @@ static int job_control(struct tty_struct *tty, struct file *file) static ssize_t n_tty_read(struct tty_struct *tty, struct file *file, unsigned char __user *buf, size_t nr) { + struct n_tty_data *ldata = tty->disc_data; unsigned char __user *b = buf; DECLARE_WAITQUEUE(wait, current); int c; @@ -1741,17 +1799,13 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file, int packet; do_it_again: - - if (WARN_ON(!tty->read_buf)) - return -EAGAIN; - c = job_control(tty, file); if (c < 0) return c; minimum = time = 0; timeout = MAX_SCHEDULE_TIMEOUT; - if (!tty->icanon) { + if (!ldata->icanon) { time = (HZ / 10) * TIME_CHAR(tty); minimum = MIN_CHAR(tty); if (minimum) { @@ -1774,10 +1828,10 @@ do_it_again: * Internal serialization of reads. */ if (file->f_flags & O_NONBLOCK) { - if (!mutex_trylock(&tty->atomic_read_lock)) + if (!mutex_trylock(&ldata->atomic_read_lock)) return -EAGAIN; } else { - if (mutex_lock_interruptible(&tty->atomic_read_lock)) + if (mutex_lock_interruptible(&ldata->atomic_read_lock)) return -ERESTARTSYS; } packet = tty->packet; @@ -1830,7 +1884,6 @@ do_it_again: /* FIXME: does n_tty_set_room need locking ? */ n_tty_set_room(tty); timeout = schedule_timeout(timeout); - BUG_ON(!tty->read_buf); continue; } __set_current_state(TASK_RUNNING); @@ -1845,45 +1898,45 @@ do_it_again: nr--; } - if (tty->icanon && !L_EXTPROC(tty)) { + if (ldata->icanon && !L_EXTPROC(tty)) { /* N.B. avoid overrun if nr == 0 */ - spin_lock_irqsave(&tty->read_lock, flags); - while (nr && tty->read_cnt) { + spin_lock_irqsave(&ldata->read_lock, flags); + while (nr && ldata->read_cnt) { int eol; - eol = test_and_clear_bit(tty->read_tail, - tty->read_flags); - c = tty->read_buf[tty->read_tail]; - tty->read_tail = ((tty->read_tail+1) & + eol = test_and_clear_bit(ldata->read_tail, + ldata->read_flags); + c = ldata->read_buf[ldata->read_tail]; + ldata->read_tail = ((ldata->read_tail+1) & (N_TTY_BUF_SIZE-1)); - tty->read_cnt--; + ldata->read_cnt--; if (eol) { /* this test should be redundant: * we shouldn't be reading data if * canon_data is 0 */ - if (--tty->canon_data < 0) - tty->canon_data = 0; + if (--ldata->canon_data < 0) + ldata->canon_data = 0; } - spin_unlock_irqrestore(&tty->read_lock, flags); + spin_unlock_irqrestore(&ldata->read_lock, flags); if (!eol || (c != __DISABLED_CHAR)) { if (tty_put_user(tty, c, b++)) { retval = -EFAULT; b--; - spin_lock_irqsave(&tty->read_lock, flags); + spin_lock_irqsave(&ldata->read_lock, flags); break; } nr--; } if (eol) { tty_audit_push(tty); - spin_lock_irqsave(&tty->read_lock, flags); + spin_lock_irqsave(&ldata->read_lock, flags); break; } - spin_lock_irqsave(&tty->read_lock, flags); + spin_lock_irqsave(&ldata->read_lock, flags); } - spin_unlock_irqrestore(&tty->read_lock, flags); + spin_unlock_irqrestore(&ldata->read_lock, flags); if (retval) break; } else { @@ -1915,7 +1968,7 @@ do_it_again: if (time) timeout = time; } - mutex_unlock(&tty->atomic_read_lock); + mutex_unlock(&ldata->atomic_read_lock); remove_wait_queue(&tty->read_wait, &wait); if (!waitqueue_active(&tty->read_wait)) @@ -2076,19 +2129,19 @@ static unsigned int n_tty_poll(struct tty_struct *tty, struct file *file, return mask; } -static unsigned long inq_canon(struct tty_struct *tty) +static unsigned long inq_canon(struct n_tty_data *ldata) { int nr, head, tail; - if (!tty->canon_data) + if (!ldata->canon_data) return 0; - head = tty->canon_head; - tail = tty->read_tail; + head = ldata->canon_head; + tail = ldata->read_tail; nr = (head - tail) & (N_TTY_BUF_SIZE-1); /* Skip EOF-chars.. */ while (head != tail) { - if (test_bit(tail, tty->read_flags) && - tty->read_buf[tail] == __DISABLED_CHAR) + if (test_bit(tail, ldata->read_flags) && + ldata->read_buf[tail] == __DISABLED_CHAR) nr--; tail = (tail+1) & (N_TTY_BUF_SIZE-1); } @@ -2098,6 +2151,7 @@ static unsigned long inq_canon(struct tty_struct *tty) static int n_tty_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) { + struct n_tty_data *ldata = tty->disc_data; int retval; switch (cmd) { @@ -2105,9 +2159,9 @@ static int n_tty_ioctl(struct tty_struct *tty, struct file *file, return put_user(tty_chars_in_buffer(tty), (int __user *) arg); case TIOCINQ: /* FIXME: Locking */ - retval = tty->read_cnt; + retval = ldata->read_cnt; if (L_ICANON(tty)) - retval = inq_canon(tty); + retval = inq_canon(ldata); return put_user(retval, (unsigned int __user *) arg); default: return n_tty_ioctl_helper(tty, file, cmd, arg); diff --git a/drivers/tty/nozomi.c b/drivers/tty/nozomi.c index b917c942495..a0c69ab0439 100644 --- a/drivers/tty/nozomi.c +++ b/drivers/tty/nozomi.c @@ -400,7 +400,7 @@ struct buffer { } __attribute__ ((packed)); /* Global variables */ -static const struct pci_device_id nozomi_pci_tbl[] __devinitconst = { +static const struct pci_device_id nozomi_pci_tbl[] = { {PCI_DEVICE(0x1931, 0x000c)}, /* Nozomi HSDPA */ {}, }; @@ -1360,7 +1360,7 @@ static void remove_sysfs_files(struct nozomi *dc) } /* Allocate memory for one device */ -static int __devinit nozomi_card_init(struct pci_dev *pdev, +static int nozomi_card_init(struct pci_dev *pdev, const struct pci_device_id *ent) { resource_size_t start; @@ -1479,6 +1479,7 @@ static int __devinit nozomi_card_init(struct pci_dev *pdev, if (IS_ERR(tty_dev)) { ret = PTR_ERR(tty_dev); dev_err(&pdev->dev, "Could not allocate tty?\n"); + tty_port_destroy(&port->port); goto err_free_tty; } } @@ -1486,8 +1487,10 @@ static int __devinit nozomi_card_init(struct pci_dev *pdev, return 0; err_free_tty: - for (i = dc->index_start; i < dc->index_start + MAX_PORT; ++i) - tty_unregister_device(ntty_driver, i); + for (i = 0; i < MAX_PORT; ++i) { + tty_unregister_device(ntty_driver, dc->index_start + i); + tty_port_destroy(&dc->port[i].port); + } err_free_kfifo: for (i = 0; i < MAX_PORT; i++) kfifo_free(&dc->port[i].fifo_ul); @@ -1504,7 +1507,7 @@ err: return ret; } -static void __devexit tty_exit(struct nozomi *dc) +static void tty_exit(struct nozomi *dc) { unsigned int i; @@ -1520,12 +1523,14 @@ static void __devexit tty_exit(struct nozomi *dc) complete off a hangup method ? */ while (dc->open_ttys) msleep(1); - for (i = dc->index_start; i < dc->index_start + MAX_PORT; ++i) - tty_unregister_device(ntty_driver, i); + for (i = 0; i < MAX_PORT; ++i) { + tty_unregister_device(ntty_driver, dc->index_start + i); + tty_port_destroy(&dc->port[i].port); + } } /* Deallocate memory for one device */ -static void __devexit nozomi_card_exit(struct pci_dev *pdev) +static void nozomi_card_exit(struct pci_dev *pdev) { int i; struct ctrl_ul ctrl; @@ -1903,7 +1908,7 @@ static struct pci_driver nozomi_driver = { .name = NOZOMI_NAME, .id_table = nozomi_pci_tbl, .probe = nozomi_card_init, - .remove = __devexit_p(nozomi_card_exit), + .remove = nozomi_card_exit, }; static __init int nozomi_init(void) diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c index a82b39939a9..be6a373601b 100644 --- a/drivers/tty/pty.c +++ b/drivers/tty/pty.c @@ -4,9 +4,6 @@ * Added support for a Unix98-style ptmx device. * -- C. Scott Ananian <cananian@alumni.princeton.edu>, 14-Jan-1998 * - * When reading this code see also fs/devpts. In particular note that the - * driver_data field is used by the devpts side as a binding to the devpts - * inode. */ #include <linux/module.h> @@ -59,7 +56,7 @@ static void pty_close(struct tty_struct *tty, struct file *filp) #ifdef CONFIG_UNIX98_PTYS if (tty->driver == ptm_driver) { mutex_lock(&devpts_mutex); - devpts_pty_kill(tty->link); + devpts_pty_kill(tty->link->driver_data); mutex_unlock(&devpts_mutex); } #endif @@ -96,7 +93,7 @@ static void pty_unthrottle(struct tty_struct *tty) static int pty_space(struct tty_struct *to) { - int n = 8192 - to->buf.memory_used; + int n = 8192 - to->port->buf.memory_used; if (n < 0) return 0; return n; @@ -174,6 +171,41 @@ static int pty_set_lock(struct tty_struct *tty, int __user *arg) return 0; } +static int pty_get_lock(struct tty_struct *tty, int __user *arg) +{ + int locked = test_bit(TTY_PTY_LOCK, &tty->flags); + return put_user(locked, arg); +} + +/* Set the packet mode on a pty */ +static int pty_set_pktmode(struct tty_struct *tty, int __user *arg) +{ + unsigned long flags; + int pktmode; + + if (get_user(pktmode, arg)) + return -EFAULT; + + spin_lock_irqsave(&tty->ctrl_lock, flags); + if (pktmode) { + if (!tty->packet) { + tty->packet = 1; + tty->link->ctrl_status = 0; + } + } else + tty->packet = 0; + spin_unlock_irqrestore(&tty->ctrl_lock, flags); + + return 0; +} + +/* Get the packet mode of a pty */ +static int pty_get_pktmode(struct tty_struct *tty, int __user *arg) +{ + int pktmode = tty->packet; + return put_user(pktmode, arg); +} + /* Send a signal to the slave */ static int pty_signal(struct tty_struct *tty, int sig) { @@ -245,7 +277,7 @@ static void pty_set_termios(struct tty_struct *tty, * peform a terminal resize correctly */ -int pty_resize(struct tty_struct *tty, struct winsize *ws) +static int pty_resize(struct tty_struct *tty, struct winsize *ws) { struct pid *pgrp, *rpgrp; unsigned long flags; @@ -348,6 +380,7 @@ static int pty_common_install(struct tty_driver *driver, struct tty_struct *tty, tty_port_init(ports[1]); o_tty->port = ports[0]; tty->port = ports[1]; + o_tty->port->itty = o_tty; tty_driver_kref_get(driver); tty->count++; @@ -366,9 +399,16 @@ err: return retval; } +/* this is called once with whichever end is closed last */ +static void pty_unix98_shutdown(struct tty_struct *tty) +{ + devpts_kill_index(tty->driver_data, tty->index); +} + static void pty_cleanup(struct tty_struct *tty) { - kfree(tty->port); + tty->port->itty = NULL; + tty_port_put(tty->port); } /* Traditional BSD devices */ @@ -393,6 +433,12 @@ static int pty_bsd_ioctl(struct tty_struct *tty, switch (cmd) { case TIOCSPTLCK: /* Set PT Lock (disallow slave open) */ return pty_set_lock(tty, (int __user *) arg); + case TIOCGPTLCK: /* Get PT Lock status */ + return pty_get_lock(tty, (int __user *)arg); + case TIOCPKT: /* Set PT packet mode */ + return pty_set_pktmode(tty, (int __user *)arg); + case TIOCGPKT: /* Get PT packet mode */ + return pty_get_pktmode(tty, (int __user *)arg); case TIOCSIG: /* Send signal to other side of pty */ return pty_signal(tty, (int) arg); } @@ -507,6 +553,12 @@ static int pty_unix98_ioctl(struct tty_struct *tty, switch (cmd) { case TIOCSPTLCK: /* Set PT Lock (disallow slave open) */ return pty_set_lock(tty, (int __user *)arg); + case TIOCGPTLCK: /* Get PT Lock status */ + return pty_get_lock(tty, (int __user *)arg); + case TIOCPKT: /* Set PT packet mode */ + return pty_set_pktmode(tty, (int __user *)arg); + case TIOCGPKT: /* Get PT packet mode */ + return pty_get_pktmode(tty, (int __user *)arg); case TIOCGPTN: /* Get PT Number */ return put_user(tty->index, (unsigned int __user *)arg); case TIOCSIG: /* Send signal to other side of pty */ @@ -547,7 +599,7 @@ static struct tty_struct *pts_unix98_lookup(struct tty_driver *driver, struct tty_struct *tty; mutex_lock(&devpts_mutex); - tty = devpts_get_tty(pts_inode, idx); + tty = devpts_get_priv(pts_inode); mutex_unlock(&devpts_mutex); /* Master must be open before slave */ if (!tty) @@ -581,6 +633,7 @@ static const struct tty_operations ptm_unix98_ops = { .set_termios = pty_set_termios, .ioctl = pty_unix98_ioctl, .resize = pty_resize, + .shutdown = pty_unix98_shutdown, .cleanup = pty_cleanup }; @@ -596,6 +649,7 @@ static const struct tty_operations pty_unix98_ops = { .chars_in_buffer = pty_chars_in_buffer, .unthrottle = pty_unthrottle, .set_termios = pty_set_termios, + .shutdown = pty_unix98_shutdown, .cleanup = pty_cleanup, }; @@ -614,6 +668,7 @@ static const struct tty_operations pty_unix98_ops = { static int ptmx_open(struct inode *inode, struct file *filp) { struct tty_struct *tty; + struct inode *slave_inode; int retval; int index; @@ -650,15 +705,21 @@ static int ptmx_open(struct inode *inode, struct file *filp) tty_add_file(tty, filp); - retval = devpts_pty_new(inode, tty->link); - if (retval) + slave_inode = devpts_pty_new(inode, + MKDEV(UNIX98_PTY_SLAVE_MAJOR, index), index, + tty->link); + if (IS_ERR(slave_inode)) { + retval = PTR_ERR(slave_inode); goto err_release; + } retval = ptm_driver->ops->open(tty, filp); if (retval) goto err_release; tty_unlock(tty); + tty->driver_data = inode; + tty->link->driver_data = slave_inode; return 0; err_release: tty_unlock(tty); diff --git a/drivers/tty/rocket.c b/drivers/tty/rocket.c index 9700d34b20a..e42009a0052 100644 --- a/drivers/tty/rocket.c +++ b/drivers/tty/rocket.c @@ -673,6 +673,7 @@ static void init_r_port(int board, int aiop, int chan, struct pci_dev *pci_dev) if (sInitChan(ctlp, &info->channel, aiop, chan) == 0) { printk(KERN_ERR "RocketPort sInitChan(%d, %d, %d) failed!\n", board, aiop, chan); + tty_port_destroy(&info->port); kfree(info); return; } @@ -1757,7 +1758,7 @@ static void rp_flush_buffer(struct tty_struct *tty) #ifdef CONFIG_PCI -static struct pci_device_id __devinitdata __used rocket_pci_ids[] = { +static struct pci_device_id __used rocket_pci_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_ANY_ID) }, { } }; @@ -2357,6 +2358,7 @@ static void rp_cleanup_module(void) for (i = 0; i < MAX_RP_PORTS; i++) if (rp_table[i]) { tty_unregister_device(rocket_driver, i); + tty_port_destroy(&rp_table[i]->port); kfree(rp_table[i]); } diff --git a/drivers/tty/serial/68328serial.c b/drivers/tty/serial/68328serial.c index 66c38a3f74c..f99a84526f8 100644 --- a/drivers/tty/serial/68328serial.c +++ b/drivers/tty/serial/68328serial.c @@ -1225,6 +1225,8 @@ rs68328_init(void) if (tty_register_driver(serial_driver)) { put_tty_driver(serial_driver); + for (i = 0; i < NR_PORTS; i++) + tty_port_destroy(&m68k_soft[i].tport); printk(KERN_ERR "Couldn't register serial driver\n"); return -ENOMEM; } diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c index 3ba4234592b..d085e3a8ec0 100644 --- a/drivers/tty/serial/8250/8250.c +++ b/drivers/tty/serial/8250/8250.c @@ -280,7 +280,17 @@ static const struct serial8250_config uart_config[] = { .fifo_size = 64, .tx_loadsz = 64, .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, - .flags = UART_CAP_FIFO | UART_CAP_AFE | UART_CAP_EFR, + .flags = UART_CAP_FIFO | UART_CAP_AFE | UART_CAP_EFR | + UART_CAP_SLEEP, + }, + [PORT_XR17V35X] = { + .name = "XR17V35X", + .fifo_size = 256, + .tx_loadsz = 256, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_11 | + UART_FCR_T_TRIG_11, + .flags = UART_CAP_FIFO | UART_CAP_AFE | UART_CAP_EFR | + UART_CAP_SLEEP, }, [PORT_LPC3220] = { .name = "LPC3220", @@ -455,6 +465,7 @@ static void io_serial_out(struct uart_port *p, int offset, int value) } static int serial8250_default_handle_irq(struct uart_port *port); +static int exar_handle_irq(struct uart_port *port); static void set_io_from_upio(struct uart_port *p) { @@ -574,6 +585,19 @@ EXPORT_SYMBOL_GPL(serial8250_clear_and_reinit_fifos); */ static void serial8250_set_sleep(struct uart_8250_port *p, int sleep) { + /* + * Exar UARTs have a SLEEP register that enables or disables + * each UART to enter sleep mode separately. On the XR17V35x the + * register is accessible to each UART at the UART_EXAR_SLEEP + * offset but the UART channel may only write to the corresponding + * bit. + */ + if ((p->port.type == PORT_XR17V35X) || + (p->port.type == PORT_XR17D15X)) { + serial_out(p, UART_EXAR_SLEEP, 0xff); + return; + } + if (p->capabilities & UART_CAP_SLEEP) { if (p->capabilities & UART_CAP_EFR) { serial_out(p, UART_LCR, UART_LCR_CONF_MODE_B); @@ -882,6 +906,27 @@ static void autoconfig_16550a(struct uart_8250_port *up) up->capabilities |= UART_CAP_FIFO; /* + * XR17V35x UARTs have an extra divisor register, DLD + * that gets enabled with when DLAB is set which will + * cause the device to incorrectly match and assign + * port type to PORT_16650. The EFR for this UART is + * found at offset 0x09. Instead check the Deice ID (DVID) + * register for a 2, 4 or 8 port UART. + */ + if (up->port.flags & UPF_EXAR_EFR) { + status1 = serial_in(up, UART_EXAR_DVID); + if (status1 == 0x82 || status1 == 0x84 || status1 == 0x88) { + DEBUG_AUTOCONF("Exar XR17V35x "); + up->port.type = PORT_XR17V35X; + up->capabilities |= UART_CAP_AFE | UART_CAP_EFR | + UART_CAP_SLEEP; + + return; + } + + } + + /* * Check for presence of the EFR when DLAB is set. * Only ST16C650V1 UARTs pass this test. */ @@ -1013,8 +1058,12 @@ static void autoconfig_16550a(struct uart_8250_port *up) * Exar uarts have EFR in a weird location */ if (up->port.flags & UPF_EXAR_EFR) { + DEBUG_AUTOCONF("Exar XR17D15x "); up->port.type = PORT_XR17D15X; - up->capabilities |= UART_CAP_AFE | UART_CAP_EFR; + up->capabilities |= UART_CAP_AFE | UART_CAP_EFR | + UART_CAP_SLEEP; + + return; } /* @@ -1516,6 +1565,31 @@ static int serial8250_default_handle_irq(struct uart_port *port) } /* + * These Exar UARTs have an extra interrupt indicator that could + * fire for a few unimplemented interrupts. One of which is a + * wakeup event when coming out of sleep. Put this here just + * to be on the safe side that these interrupts don't go unhandled. + */ +static int exar_handle_irq(struct uart_port *port) +{ + unsigned char int0, int1, int2, int3; + unsigned int iir = serial_port_in(port, UART_IIR); + int ret; + + ret = serial8250_handle_irq(port, iir); + + if ((port->type == PORT_XR17V35X) || + (port->type == PORT_XR17D15X)) { + int0 = serial_port_in(port, 0x80); + int1 = serial_port_in(port, 0x81); + int2 = serial_port_in(port, 0x82); + int3 = serial_port_in(port, 0x83); + } + + return ret; +} + +/* * This is the serial driver's interrupt routine. * * Arjan thinks the old way was overly complex, so it got simplified. @@ -2349,16 +2423,14 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, serial_port_out(port, UART_EFR, efr); } -#ifdef CONFIG_ARCH_OMAP1 /* Workaround to enable 115200 baud on OMAP1510 internal ports */ - if (cpu_is_omap1510() && is_omap_port(up)) { + if (is_omap1510_8250(up)) { if (baud == 115200) { quot = 1; serial_port_out(port, UART_OMAP_OSC_12M_SEL, 1); } else serial_port_out(port, UART_OMAP_OSC_12M_SEL, 0); } -#endif /* * For NatSemi, switch to bank 2 not bank 1, to avoid resetting EXCR2, @@ -2439,10 +2511,9 @@ static unsigned int serial8250_port_size(struct uart_8250_port *pt) { if (pt->port.iotype == UPIO_AU) return 0x1000; -#ifdef CONFIG_ARCH_OMAP1 - if (is_omap_port(pt)) + if (is_omap1_8250(pt)) return 0x16 << pt->port.regshift; -#endif + return 8 << pt->port.regshift; } @@ -2617,6 +2688,11 @@ static void serial8250_config_port(struct uart_port *port, int flags) serial8250_release_rsa_resource(up); if (port->type == PORT_UNKNOWN) serial8250_release_std_resource(up); + + /* Fixme: probably not the best place for this */ + if ((port->type == PORT_XR17V35X) || + (port->type == PORT_XR17D15X)) + port->handle_irq = exar_handle_irq; } static int @@ -2992,7 +3068,7 @@ void serial8250_resume_port(int line) * list is terminated with a zero flags entry, which means we expect * all entries to have at least UPF_BOOT_AUTOCONF set. */ -static int __devinit serial8250_probe(struct platform_device *dev) +static int serial8250_probe(struct platform_device *dev) { struct plat_serial8250_port *p = dev->dev.platform_data; struct uart_8250_port uart; @@ -3038,7 +3114,7 @@ static int __devinit serial8250_probe(struct platform_device *dev) /* * Remove serial ports registered against a platform device. */ -static int __devexit serial8250_remove(struct platform_device *dev) +static int serial8250_remove(struct platform_device *dev) { int i; @@ -3081,7 +3157,7 @@ static int serial8250_resume(struct platform_device *dev) static struct platform_driver serial8250_isa_driver = { .probe = serial8250_probe, - .remove = __devexit_p(serial8250_remove), + .remove = serial8250_remove, .suspend = serial8250_suspend, .resume = serial8250_resume, .driver = { diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h index 5a76f9c8d36..3b4ea84898c 100644 --- a/drivers/tty/serial/8250/8250.h +++ b/drivers/tty/serial/8250/8250.h @@ -106,3 +106,39 @@ static inline int serial8250_pnp_init(void) { return 0; } static inline void serial8250_pnp_exit(void) { } #endif +#ifdef CONFIG_ARCH_OMAP1 +static inline int is_omap1_8250(struct uart_8250_port *pt) +{ + int res; + + switch (pt->port.mapbase) { + case OMAP1_UART1_BASE: + case OMAP1_UART2_BASE: + case OMAP1_UART3_BASE: + res = 1; + break; + default: + res = 0; + break; + } + + return res; +} + +static inline int is_omap1510_8250(struct uart_8250_port *pt) +{ + if (!cpu_is_omap1510()) + return 0; + + return is_omap1_8250(pt); +} +#else +static inline int is_omap1_8250(struct uart_8250_port *pt) +{ + return 0; +} +static inline int is_omap1510_8250(struct uart_8250_port *pt) +{ + return 0; +} +#endif diff --git a/drivers/tty/serial/8250/8250_acorn.c b/drivers/tty/serial/8250/8250_acorn.c index 857498312a9..549aa07c0d2 100644 --- a/drivers/tty/serial/8250/8250_acorn.c +++ b/drivers/tty/serial/8250/8250_acorn.c @@ -38,7 +38,7 @@ struct serial_card_info { void __iomem *vaddr; }; -static int __devinit +static int serial_card_probe(struct expansion_card *ec, const struct ecard_id *id) { struct serial_card_info *info; @@ -80,7 +80,7 @@ serial_card_probe(struct expansion_card *ec, const struct ecard_id *id) return 0; } -static void __devexit serial_card_remove(struct expansion_card *ec) +static void serial_card_remove(struct expansion_card *ec) { struct serial_card_info *info = ecard_get_drvdata(ec); int i; @@ -116,7 +116,7 @@ static const struct ecard_id serial_cids[] = { static struct ecard_driver serial_card_driver = { .probe = serial_card_probe, - .remove = __devexit_p(serial_card_remove), + .remove = serial_card_remove, .id_table = serial_cids, .drv = { .name = "8250_acorn", diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index c3b2ec0c8c0..1d0dba2d562 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -87,7 +87,7 @@ static int dw8250_handle_irq(struct uart_port *p) return 0; } -static int __devinit dw8250_probe(struct platform_device *pdev) +static int dw8250_probe(struct platform_device *pdev) { struct uart_8250_port uart = {}; struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -152,7 +152,7 @@ static int __devinit dw8250_probe(struct platform_device *pdev) return 0; } -static int __devexit dw8250_remove(struct platform_device *pdev) +static int dw8250_remove(struct platform_device *pdev) { struct dw8250_data *data = platform_get_drvdata(pdev); @@ -161,6 +161,29 @@ static int __devexit dw8250_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_PM +static int dw8250_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct dw8250_data *data = platform_get_drvdata(pdev); + + serial8250_suspend_port(data->line); + + return 0; +} + +static int dw8250_resume(struct platform_device *pdev) +{ + struct dw8250_data *data = platform_get_drvdata(pdev); + + serial8250_resume_port(data->line); + + return 0; +} +#else +#define dw8250_suspend NULL +#define dw8250_resume NULL +#endif /* CONFIG_PM */ + static const struct of_device_id dw8250_match[] = { { .compatible = "snps,dw-apb-uart" }, { /* Sentinel */ } @@ -174,7 +197,9 @@ static struct platform_driver dw8250_platform_driver = { .of_match_table = dw8250_match, }, .probe = dw8250_probe, - .remove = __devexit_p(dw8250_remove), + .remove = dw8250_remove, + .suspend = dw8250_suspend, + .resume = dw8250_resume, }; module_platform_driver(dw8250_platform_driver); diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c index eaafb98debe..f53a7db4350 100644 --- a/drivers/tty/serial/8250/8250_early.c +++ b/drivers/tty/serial/8250/8250_early.c @@ -48,7 +48,7 @@ struct early_serial8250_device { static struct early_serial8250_device early_device; -static unsigned int __init serial_in(struct uart_port *port, int offset) +unsigned int __weak __init serial8250_early_in(struct uart_port *port, int offset) { switch (port->iotype) { case UPIO_MEM: @@ -62,7 +62,7 @@ static unsigned int __init serial_in(struct uart_port *port, int offset) } } -static void __init serial_out(struct uart_port *port, int offset, int value) +void __weak __init serial8250_early_out(struct uart_port *port, int offset, int value) { switch (port->iotype) { case UPIO_MEM: @@ -84,7 +84,7 @@ static void __init wait_for_xmitr(struct uart_port *port) unsigned int status; for (;;) { - status = serial_in(port, UART_LSR); + status = serial8250_early_in(port, UART_LSR); if ((status & BOTH_EMPTY) == BOTH_EMPTY) return; cpu_relax(); @@ -94,7 +94,7 @@ static void __init wait_for_xmitr(struct uart_port *port) static void __init serial_putc(struct uart_port *port, int c) { wait_for_xmitr(port); - serial_out(port, UART_TX, c); + serial8250_early_out(port, UART_TX, c); } static void __init early_serial8250_write(struct console *console, @@ -104,14 +104,14 @@ static void __init early_serial8250_write(struct console *console, unsigned int ier; /* Save the IER and disable interrupts */ - ier = serial_in(port, UART_IER); - serial_out(port, UART_IER, 0); + ier = serial8250_early_in(port, UART_IER); + serial8250_early_out(port, UART_IER, 0); uart_console_write(port, s, count, serial_putc); /* Wait for transmitter to become empty and restore the IER */ wait_for_xmitr(port); - serial_out(port, UART_IER, ier); + serial8250_early_out(port, UART_IER, ier); } static unsigned int __init probe_baud(struct uart_port *port) @@ -119,11 +119,11 @@ static unsigned int __init probe_baud(struct uart_port *port) unsigned char lcr, dll, dlm; unsigned int quot; - lcr = serial_in(port, UART_LCR); - serial_out(port, UART_LCR, lcr | UART_LCR_DLAB); - dll = serial_in(port, UART_DLL); - dlm = serial_in(port, UART_DLM); - serial_out(port, UART_LCR, lcr); + lcr = serial8250_early_in(port, UART_LCR); + serial8250_early_out(port, UART_LCR, lcr | UART_LCR_DLAB); + dll = serial8250_early_in(port, UART_DLL); + dlm = serial8250_early_in(port, UART_DLM); + serial8250_early_out(port, UART_LCR, lcr); quot = (dlm << 8) | dll; return (port->uartclk / 16) / quot; @@ -135,17 +135,17 @@ static void __init init_port(struct early_serial8250_device *device) unsigned int divisor; unsigned char c; - serial_out(port, UART_LCR, 0x3); /* 8n1 */ - serial_out(port, UART_IER, 0); /* no interrupt */ - serial_out(port, UART_FCR, 0); /* no fifo */ - serial_out(port, UART_MCR, 0x3); /* DTR + RTS */ - - divisor = port->uartclk / (16 * device->baud); - c = serial_in(port, UART_LCR); - serial_out(port, UART_LCR, c | UART_LCR_DLAB); - serial_out(port, UART_DLL, divisor & 0xff); - serial_out(port, UART_DLM, (divisor >> 8) & 0xff); - serial_out(port, UART_LCR, c & ~UART_LCR_DLAB); + serial8250_early_out(port, UART_LCR, 0x3); /* 8n1 */ + serial8250_early_out(port, UART_IER, 0); /* no interrupt */ + serial8250_early_out(port, UART_FCR, 0); /* no fifo */ + serial8250_early_out(port, UART_MCR, 0x3); /* DTR + RTS */ + + divisor = DIV_ROUND_CLOSEST(port->uartclk, 16 * device->baud); + c = serial8250_early_in(port, UART_LCR); + serial8250_early_out(port, UART_LCR, c | UART_LCR_DLAB); + serial8250_early_out(port, UART_DLL, divisor & 0xff); + serial8250_early_out(port, UART_DLM, (divisor >> 8) & 0xff); + serial8250_early_out(port, UART_LCR, c & ~UART_LCR_DLAB); } static int __init parse_options(struct early_serial8250_device *device, diff --git a/drivers/tty/serial/8250/8250_em.c b/drivers/tty/serial/8250/8250_em.c index 3a0363e7f3a..916cc19fbbd 100644 --- a/drivers/tty/serial/8250/8250_em.c +++ b/drivers/tty/serial/8250/8250_em.c @@ -89,7 +89,7 @@ static void serial8250_em_serial_dl_write(struct uart_8250_port *up, int value) serial_out(up, UART_DLM_EM, value >> 8 & 0xff); } -static int __devinit serial8250_em_probe(struct platform_device *pdev) +static int serial8250_em_probe(struct platform_device *pdev) { struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); struct resource *irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); @@ -152,7 +152,7 @@ static int __devinit serial8250_em_probe(struct platform_device *pdev) return ret; } -static int __devexit serial8250_em_remove(struct platform_device *pdev) +static int serial8250_em_remove(struct platform_device *pdev) { struct serial8250_em_priv *priv = platform_get_drvdata(pdev); @@ -163,7 +163,7 @@ static int __devexit serial8250_em_remove(struct platform_device *pdev) return 0; } -static const struct of_device_id serial8250_em_dt_ids[] __devinitconst = { +static const struct of_device_id serial8250_em_dt_ids[] = { { .compatible = "renesas,em-uart", }, {}, }; @@ -176,7 +176,7 @@ static struct platform_driver serial8250_em_platform_driver = { .owner = THIS_MODULE, }, .probe = serial8250_em_probe, - .remove = __devexit_p(serial8250_em_remove), + .remove = serial8250_em_remove, }; module_platform_driver(serial8250_em_platform_driver); diff --git a/drivers/tty/serial/8250/8250_hp300.c b/drivers/tty/serial/8250/8250_hp300.c index f3d0edf4664..5bdaf271d39 100644 --- a/drivers/tty/serial/8250/8250_hp300.c +++ b/drivers/tty/serial/8250/8250_hp300.c @@ -36,9 +36,9 @@ static struct hp300_port *hp300_ports; #ifdef CONFIG_HPDCA -static int __devinit hpdca_init_one(struct dio_dev *d, +static int hpdca_init_one(struct dio_dev *d, const struct dio_device_id *ent); -static void __devexit hpdca_remove_one(struct dio_dev *d); +static void hpdca_remove_one(struct dio_dev *d); static struct dio_device_id hpdca_dio_tbl[] = { { DIO_ID_DCA0 }, @@ -52,7 +52,7 @@ static struct dio_driver hpdca_driver = { .name = "hpdca", .id_table = hpdca_dio_tbl, .probe = hpdca_init_one, - .remove = __devexit_p(hpdca_remove_one), + .remove = hpdca_remove_one, }; #endif @@ -159,7 +159,7 @@ int __init hp300_setup_serial_console(void) #endif /* CONFIG_SERIAL_8250_CONSOLE */ #ifdef CONFIG_HPDCA -static int __devinit hpdca_init_one(struct dio_dev *d, +static int hpdca_init_one(struct dio_dev *d, const struct dio_device_id *ent) { struct uart_8250_port uart; @@ -288,7 +288,7 @@ static int __init hp300_8250_init(void) } #ifdef CONFIG_HPDCA -static void __devexit hpdca_remove_one(struct dio_dev *d) +static void hpdca_remove_one(struct dio_dev *d) { int line; diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 17b7d26abf4..26b9dc012ed 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -288,7 +288,7 @@ static int pci_plx9050_init(struct pci_dev *dev) return 0; } -static void __devexit pci_plx9050_exit(struct pci_dev *dev) +static void pci_plx9050_exit(struct pci_dev *dev) { u8 __iomem *p; @@ -313,7 +313,7 @@ static void __devexit pci_plx9050_exit(struct pci_dev *dev) #define NI8420_INT_ENABLE_REG 0x38 #define NI8420_INT_ENABLE_BIT 0x2000 -static void __devexit pci_ni8420_exit(struct pci_dev *dev) +static void pci_ni8420_exit(struct pci_dev *dev) { void __iomem *p; unsigned long base, len; @@ -345,7 +345,7 @@ static void __devexit pci_ni8420_exit(struct pci_dev *dev) #define MITE_LCIMR2_CLR_CPU_IE (1 << 30) -static void __devexit pci_ni8430_exit(struct pci_dev *dev) +static void pci_ni8430_exit(struct pci_dev *dev) { void __iomem *p; unsigned long base, len; @@ -422,7 +422,7 @@ static int sbs_init(struct pci_dev *dev) * Disables the global interrupt of PMC-OctalPro */ -static void __devexit sbs_exit(struct pci_dev *dev) +static void sbs_exit(struct pci_dev *dev) { u8 __iomem *p; @@ -991,7 +991,7 @@ static int pci_ite887x_init(struct pci_dev *dev) return ret; } -static void __devexit pci_ite887x_exit(struct pci_dev *dev) +static void pci_ite887x_exit(struct pci_dev *dev) { u32 ioport; /* the ioport is bit 0-15 in POSIO0R */ @@ -1068,7 +1068,7 @@ ce4100_serial_setup(struct serial_private *priv, { int ret; - ret = setup_port(priv, port, 0, 0, board->reg_shift); + ret = setup_port(priv, port, idx, 0, board->reg_shift); port->port.iotype = UPIO_MEM32; port->port.type = PORT_XSCALE; port->port.flags = (port->port.flags | UPF_FIXED_PORT | UPF_FIXED_TYPE); @@ -1165,6 +1165,94 @@ pci_xr17c154_setup(struct serial_private *priv, } static int +pci_xr17v35x_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + u8 __iomem *p; + + p = pci_ioremap_bar(priv->dev, 0); + if (p == NULL) + return -ENOMEM; + + port->port.flags |= UPF_EXAR_EFR; + + /* + * Setup Multipurpose Input/Output pins. + */ + if (idx == 0) { + writeb(0x00, p + 0x8f); /*MPIOINT[7:0]*/ + writeb(0x00, p + 0x90); /*MPIOLVL[7:0]*/ + writeb(0x00, p + 0x91); /*MPIO3T[7:0]*/ + writeb(0x00, p + 0x92); /*MPIOINV[7:0]*/ + writeb(0x00, p + 0x93); /*MPIOSEL[7:0]*/ + writeb(0x00, p + 0x94); /*MPIOOD[7:0]*/ + writeb(0x00, p + 0x95); /*MPIOINT[15:8]*/ + writeb(0x00, p + 0x96); /*MPIOLVL[15:8]*/ + writeb(0x00, p + 0x97); /*MPIO3T[15:8]*/ + writeb(0x00, p + 0x98); /*MPIOINV[15:8]*/ + writeb(0x00, p + 0x99); /*MPIOSEL[15:8]*/ + writeb(0x00, p + 0x9a); /*MPIOOD[15:8]*/ + } + writeb(0x00, p + UART_EXAR_8XMODE); + writeb(UART_FCTR_EXAR_TRGD, p + UART_EXAR_FCTR); + writeb(128, p + UART_EXAR_TXTRG); + writeb(128, p + UART_EXAR_RXTRG); + iounmap(p); + + return pci_default_setup(priv, board, port, idx); +} + +#define PCI_DEVICE_ID_COMMTECH_4222PCI335 0x0004 +#define PCI_DEVICE_ID_COMMTECH_4224PCI335 0x0002 +#define PCI_DEVICE_ID_COMMTECH_2324PCI335 0x000a +#define PCI_DEVICE_ID_COMMTECH_2328PCI335 0x000b + +static int +pci_fastcom335_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + u8 __iomem *p; + + p = pci_ioremap_bar(priv->dev, 0); + if (p == NULL) + return -ENOMEM; + + port->port.flags |= UPF_EXAR_EFR; + + /* + * Setup Multipurpose Input/Output pins. + */ + if (idx == 0) { + switch (priv->dev->device) { + case PCI_DEVICE_ID_COMMTECH_4222PCI335: + case PCI_DEVICE_ID_COMMTECH_4224PCI335: + writeb(0x78, p + 0x90); /* MPIOLVL[7:0] */ + writeb(0x00, p + 0x92); /* MPIOINV[7:0] */ + writeb(0x00, p + 0x93); /* MPIOSEL[7:0] */ + break; + case PCI_DEVICE_ID_COMMTECH_2324PCI335: + case PCI_DEVICE_ID_COMMTECH_2328PCI335: + writeb(0x00, p + 0x90); /* MPIOLVL[7:0] */ + writeb(0xc0, p + 0x92); /* MPIOINV[7:0] */ + writeb(0xc0, p + 0x93); /* MPIOSEL[7:0] */ + break; + } + writeb(0x00, p + 0x8f); /* MPIOINT[7:0] */ + writeb(0x00, p + 0x91); /* MPIO3T[7:0] */ + writeb(0x00, p + 0x94); /* MPIOOD[7:0] */ + } + writeb(0x00, p + UART_EXAR_8XMODE); + writeb(UART_FCTR_EXAR_TRGD, p + UART_EXAR_FCTR); + writeb(32, p + UART_EXAR_TXTRG); + writeb(32, p + UART_EXAR_RXTRG); + iounmap(p); + + return pci_default_setup(priv, board, port, idx); +} + +static int pci_wch_ch353_setup(struct serial_private *priv, const struct pciserial_board *board, struct uart_8250_port *port, int idx) @@ -1213,6 +1301,10 @@ pci_wch_ch353_setup(struct serial_private *priv, #define PCI_VENDOR_ID_AGESTAR 0x5372 #define PCI_DEVICE_ID_AGESTAR_9375 0x6872 #define PCI_VENDOR_ID_ASIX 0x9710 +#define PCI_DEVICE_ID_COMMTECH_4222PCIE 0x0019 +#define PCI_DEVICE_ID_COMMTECH_4224PCIE 0x0020 +#define PCI_DEVICE_ID_COMMTECH_4228PCIE 0x0021 + /* Unknown vendors/cards - this should not be in linux/pci_ids.h */ #define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584 @@ -1314,7 +1406,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .subdevice = PCI_ANY_ID, .init = pci_ite887x_init, .setup = pci_default_setup, - .exit = __devexit_p(pci_ite887x_exit), + .exit = pci_ite887x_exit, }, /* * National Instruments @@ -1326,7 +1418,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .subdevice = PCI_ANY_ID, .init = pci_ni8420_init, .setup = pci_default_setup, - .exit = __devexit_p(pci_ni8420_exit), + .exit = pci_ni8420_exit, }, { .vendor = PCI_VENDOR_ID_NI, @@ -1335,7 +1427,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .subdevice = PCI_ANY_ID, .init = pci_ni8420_init, .setup = pci_default_setup, - .exit = __devexit_p(pci_ni8420_exit), + .exit = pci_ni8420_exit, }, { .vendor = PCI_VENDOR_ID_NI, @@ -1344,7 +1436,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .subdevice = PCI_ANY_ID, .init = pci_ni8420_init, .setup = pci_default_setup, - .exit = __devexit_p(pci_ni8420_exit), + .exit = pci_ni8420_exit, }, { .vendor = PCI_VENDOR_ID_NI, @@ -1353,7 +1445,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .subdevice = PCI_ANY_ID, .init = pci_ni8420_init, .setup = pci_default_setup, - .exit = __devexit_p(pci_ni8420_exit), + .exit = pci_ni8420_exit, }, { .vendor = PCI_VENDOR_ID_NI, @@ -1362,7 +1454,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .subdevice = PCI_ANY_ID, .init = pci_ni8420_init, .setup = pci_default_setup, - .exit = __devexit_p(pci_ni8420_exit), + .exit = pci_ni8420_exit, }, { .vendor = PCI_VENDOR_ID_NI, @@ -1371,7 +1463,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .subdevice = PCI_ANY_ID, .init = pci_ni8420_init, .setup = pci_default_setup, - .exit = __devexit_p(pci_ni8420_exit), + .exit = pci_ni8420_exit, }, { .vendor = PCI_VENDOR_ID_NI, @@ -1380,7 +1472,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .subdevice = PCI_ANY_ID, .init = pci_ni8420_init, .setup = pci_default_setup, - .exit = __devexit_p(pci_ni8420_exit), + .exit = pci_ni8420_exit, }, { .vendor = PCI_VENDOR_ID_NI, @@ -1389,7 +1481,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .subdevice = PCI_ANY_ID, .init = pci_ni8420_init, .setup = pci_default_setup, - .exit = __devexit_p(pci_ni8420_exit), + .exit = pci_ni8420_exit, }, { .vendor = PCI_VENDOR_ID_NI, @@ -1398,7 +1490,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .subdevice = PCI_ANY_ID, .init = pci_ni8420_init, .setup = pci_default_setup, - .exit = __devexit_p(pci_ni8420_exit), + .exit = pci_ni8420_exit, }, { .vendor = PCI_VENDOR_ID_NI, @@ -1407,7 +1499,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .subdevice = PCI_ANY_ID, .init = pci_ni8420_init, .setup = pci_default_setup, - .exit = __devexit_p(pci_ni8420_exit), + .exit = pci_ni8420_exit, }, { .vendor = PCI_VENDOR_ID_NI, @@ -1416,7 +1508,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .subdevice = PCI_ANY_ID, .init = pci_ni8420_init, .setup = pci_default_setup, - .exit = __devexit_p(pci_ni8420_exit), + .exit = pci_ni8420_exit, }, { .vendor = PCI_VENDOR_ID_NI, @@ -1425,7 +1517,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .subdevice = PCI_ANY_ID, .init = pci_ni8420_init, .setup = pci_default_setup, - .exit = __devexit_p(pci_ni8420_exit), + .exit = pci_ni8420_exit, }, { .vendor = PCI_VENDOR_ID_NI, @@ -1434,7 +1526,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .subdevice = PCI_ANY_ID, .init = pci_ni8430_init, .setup = pci_ni8430_setup, - .exit = __devexit_p(pci_ni8430_exit), + .exit = pci_ni8430_exit, }, /* * Panacom @@ -1446,7 +1538,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .subdevice = PCI_ANY_ID, .init = pci_plx9050_init, .setup = pci_default_setup, - .exit = __devexit_p(pci_plx9050_exit), + .exit = pci_plx9050_exit, }, { .vendor = PCI_VENDOR_ID_PANACOM, @@ -1455,7 +1547,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .subdevice = PCI_ANY_ID, .init = pci_plx9050_init, .setup = pci_default_setup, - .exit = __devexit_p(pci_plx9050_exit), + .exit = pci_plx9050_exit, }, /* * PLX @@ -1474,7 +1566,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .subdevice = PCI_SUBDEVICE_ID_EXSYS_4055, .init = pci_plx9050_init, .setup = pci_default_setup, - .exit = __devexit_p(pci_plx9050_exit), + .exit = pci_plx9050_exit, }, { .vendor = PCI_VENDOR_ID_PLX, @@ -1483,7 +1575,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .subdevice = PCI_SUBDEVICE_ID_KEYSPAN_SX2, .init = pci_plx9050_init, .setup = pci_default_setup, - .exit = __devexit_p(pci_plx9050_exit), + .exit = pci_plx9050_exit, }, { .vendor = PCI_VENDOR_ID_PLX, @@ -1492,7 +1584,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .subdevice = PCI_SUBDEVICE_ID_UNKNOWN_0x1584, .init = pci_plx9050_init, .setup = pci_default_setup, - .exit = __devexit_p(pci_plx9050_exit), + .exit = pci_plx9050_exit, }, { .vendor = PCI_VENDOR_ID_PLX, @@ -1501,7 +1593,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .subdevice = PCI_DEVICE_ID_PLX_ROMULUS, .init = pci_plx9050_init, .setup = pci_default_setup, - .exit = __devexit_p(pci_plx9050_exit), + .exit = pci_plx9050_exit, }, /* * SBS Technologies, Inc., PMC-OCTALPRO 232 @@ -1513,7 +1605,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .subdevice = PCI_SUBDEVICE_ID_OCTPRO232, .init = sbs_init, .setup = sbs_setup, - .exit = __devexit_p(sbs_exit), + .exit = sbs_exit, }, /* * SBS Technologies, Inc., PMC-OCTALPRO 422 @@ -1525,7 +1617,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .subdevice = PCI_SUBDEVICE_ID_OCTPRO422, .init = sbs_init, .setup = sbs_setup, - .exit = __devexit_p(sbs_exit), + .exit = sbs_exit, }, /* * SBS Technologies, Inc., P-Octal 232 @@ -1537,7 +1629,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .subdevice = PCI_SUBDEVICE_ID_POCTAL232, .init = sbs_init, .setup = sbs_setup, - .exit = __devexit_p(sbs_exit), + .exit = sbs_exit, }, /* * SBS Technologies, Inc., P-Octal 422 @@ -1549,7 +1641,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .subdevice = PCI_SUBDEVICE_ID_POCTAL422, .init = sbs_init, .setup = sbs_setup, - .exit = __devexit_p(sbs_exit), + .exit = sbs_exit, }, /* * SIIG cards - these may be called via parport_serial @@ -1622,6 +1714,27 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .subdevice = PCI_ANY_ID, .setup = pci_xr17c154_setup, }, + { + .vendor = PCI_VENDOR_ID_EXAR, + .device = PCI_DEVICE_ID_EXAR_XR17V352, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_xr17v35x_setup, + }, + { + .vendor = PCI_VENDOR_ID_EXAR, + .device = PCI_DEVICE_ID_EXAR_XR17V354, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_xr17v35x_setup, + }, + { + .vendor = PCI_VENDOR_ID_EXAR, + .device = PCI_DEVICE_ID_EXAR_XR17V358, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_xr17v35x_setup, + }, /* * Xircom cards */ @@ -1788,6 +1901,59 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .setup = pci_asix_setup, }, /* + * Commtech, Inc. Fastcom adapters + * + */ + { + .vendor = PCI_VENDOR_ID_COMMTECH, + .device = PCI_DEVICE_ID_COMMTECH_4222PCI335, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_fastcom335_setup, + }, + { + .vendor = PCI_VENDOR_ID_COMMTECH, + .device = PCI_DEVICE_ID_COMMTECH_4224PCI335, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_fastcom335_setup, + }, + { + .vendor = PCI_VENDOR_ID_COMMTECH, + .device = PCI_DEVICE_ID_COMMTECH_2324PCI335, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_fastcom335_setup, + }, + { + .vendor = PCI_VENDOR_ID_COMMTECH, + .device = PCI_DEVICE_ID_COMMTECH_2328PCI335, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_fastcom335_setup, + }, + { + .vendor = PCI_VENDOR_ID_COMMTECH, + .device = PCI_DEVICE_ID_COMMTECH_4222PCIE, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_xr17v35x_setup, + }, + { + .vendor = PCI_VENDOR_ID_COMMTECH, + .device = PCI_DEVICE_ID_COMMTECH_4224PCIE, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_xr17v35x_setup, + }, + { + .vendor = PCI_VENDOR_ID_COMMTECH, + .device = PCI_DEVICE_ID_COMMTECH_4228PCIE, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_xr17v35x_setup, + }, + /* * Default "match everything" terminator entry */ { @@ -1863,6 +2029,10 @@ enum pci_board_num_t { pbn_b0_4_1152000, + pbn_b0_2_1152000_200, + pbn_b0_4_1152000_200, + pbn_b0_8_1152000_200, + pbn_b0_2_1843200, pbn_b0_4_1843200, @@ -1962,6 +2132,9 @@ enum pci_board_num_t { pbn_exar_XR17C152, pbn_exar_XR17C154, pbn_exar_XR17C158, + pbn_exar_XR17V352, + pbn_exar_XR17V354, + pbn_exar_XR17V358, pbn_exar_ibm_saturn, pbn_pasemi_1682M, pbn_ni8430_2, @@ -1987,7 +2160,7 @@ enum pci_board_num_t { * see first lines of serial_in() and serial_out() in 8250.c */ -static struct pciserial_board pci_boards[] __devinitdata = { +static struct pciserial_board pci_boards[] = { [pbn_default] = { .flags = FL_BASE0, .num_ports = 1, @@ -2057,6 +2230,27 @@ static struct pciserial_board pci_boards[] __devinitdata = { .uart_offset = 8, }, + [pbn_b0_2_1152000_200] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 1152000, + .uart_offset = 0x200, + }, + + [pbn_b0_4_1152000_200] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 1152000, + .uart_offset = 0x200, + }, + + [pbn_b0_8_1152000_200] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 1152000, + .uart_offset = 0x200, + }, + [pbn_b0_2_1843200] = { .flags = FL_BASE0, .num_ports = 2, @@ -2580,6 +2774,30 @@ static struct pciserial_board pci_boards[] __devinitdata = { .base_baud = 921600, .uart_offset = 0x200, }, + [pbn_exar_XR17V352] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 7812500, + .uart_offset = 0x400, + .reg_shift = 0, + .first_offset = 0, + }, + [pbn_exar_XR17V354] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 7812500, + .uart_offset = 0x400, + .reg_shift = 0, + .first_offset = 0, + }, + [pbn_exar_XR17V358] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 7812500, + .uart_offset = 0x400, + .reg_shift = 0, + .first_offset = 0, + }, [pbn_exar_ibm_saturn] = { .flags = FL_BASE0, .num_ports = 1, @@ -2658,8 +2876,8 @@ static struct pciserial_board pci_boards[] __devinitdata = { .first_offset = 0x1000, }, [pbn_ce4100_1_115200] = { - .flags = FL_BASE0, - .num_ports = 1, + .flags = FL_BASE_BARS, + .num_ports = 2, .base_baud = 921600, .reg_shift = 2, }, @@ -2691,7 +2909,7 @@ static const struct pci_device_id blacklist[] = { * guess what the configuration might be, based on the pitiful PCI * serial specs. Returns 0 on success, 1 on failure. */ -static int __devinit +static int serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board) { const struct pci_device_id *bldev; @@ -2917,7 +3135,7 @@ EXPORT_SYMBOL_GPL(pciserial_resume_ports); * Probe one serial board. Unfortunately, there is no rhyme nor reason * to the arrangement of serial ports on a PCI card. */ -static int __devinit +static int pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent) { struct pci_serial_quirk *quirk; @@ -2988,7 +3206,7 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent) return rc; } -static void __devexit pciserial_remove_one(struct pci_dev *dev) +static void pciserial_remove_one(struct pci_dev *dev) { struct serial_private *priv = pci_get_drvdata(dev); @@ -3826,6 +4044,21 @@ static struct pci_device_id serial_pci_tbl[] = { PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_exar_XR17C158 }, + /* + * Exar Corp. XR17V35[248] Dual/Quad/Octal PCIe UARTs + */ + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17V352, + PCI_ANY_ID, PCI_ANY_ID, + 0, + 0, pbn_exar_XR17V352 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17V354, + PCI_ANY_ID, PCI_ANY_ID, + 0, + 0, pbn_exar_XR17V354 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17V358, + PCI_ANY_ID, PCI_ANY_ID, + 0, + 0, pbn_exar_XR17V358 }, /* * Topic TP560 Data/Fax/Voice 56k modem (reported by Evan Clarke) @@ -4257,6 +4490,38 @@ static struct pci_device_id serial_pci_tbl[] = { 0, 0, pbn_b0_bt_2_115200 }, /* + * Commtech, Inc. Fastcom adapters + */ + { PCI_VENDOR_ID_COMMTECH, PCI_DEVICE_ID_COMMTECH_4222PCI335, + PCI_ANY_ID, PCI_ANY_ID, + 0, + 0, pbn_b0_2_1152000_200 }, + { PCI_VENDOR_ID_COMMTECH, PCI_DEVICE_ID_COMMTECH_4224PCI335, + PCI_ANY_ID, PCI_ANY_ID, + 0, + 0, pbn_b0_4_1152000_200 }, + { PCI_VENDOR_ID_COMMTECH, PCI_DEVICE_ID_COMMTECH_2324PCI335, + PCI_ANY_ID, PCI_ANY_ID, + 0, + 0, pbn_b0_4_1152000_200 }, + { PCI_VENDOR_ID_COMMTECH, PCI_DEVICE_ID_COMMTECH_2328PCI335, + PCI_ANY_ID, PCI_ANY_ID, + 0, + 0, pbn_b0_8_1152000_200 }, + { PCI_VENDOR_ID_COMMTECH, PCI_DEVICE_ID_COMMTECH_4222PCIE, + PCI_ANY_ID, PCI_ANY_ID, + 0, + 0, pbn_exar_XR17V352 }, + { PCI_VENDOR_ID_COMMTECH, PCI_DEVICE_ID_COMMTECH_4224PCIE, + PCI_ANY_ID, PCI_ANY_ID, + 0, + 0, pbn_exar_XR17V354 }, + { PCI_VENDOR_ID_COMMTECH, PCI_DEVICE_ID_COMMTECH_4228PCIE, + PCI_ANY_ID, PCI_ANY_ID, + 0, + 0, pbn_exar_XR17V358 }, + + /* * These entries match devices with class COMMUNICATION_SERIAL, * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL */ @@ -4323,7 +4588,7 @@ static const struct pci_error_handlers serial8250_err_handler = { static struct pci_driver serial_pci_driver = { .name = "serial", .probe = pciserial_init_one, - .remove = __devexit_p(pciserial_remove_one), + .remove = pciserial_remove_one, #ifdef CONFIG_PM .suspend = pciserial_suspend_one, .resume = pciserial_resume_one, @@ -4332,18 +4597,7 @@ static struct pci_driver serial_pci_driver = { .err_handler = &serial8250_err_handler, }; -static int __init serial8250_pci_init(void) -{ - return pci_register_driver(&serial_pci_driver); -} - -static void __exit serial8250_pci_exit(void) -{ - pci_unregister_driver(&serial_pci_driver); -} - -module_init(serial8250_pci_init); -module_exit(serial8250_pci_exit); +module_pci_driver(serial_pci_driver); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Generic 8250/16x50 PCI serial probe module"); diff --git a/drivers/tty/serial/8250/8250_pnp.c b/drivers/tty/serial/8250/8250_pnp.c index f8ee25001dd..35d9ab95c5c 100644 --- a/drivers/tty/serial/8250/8250_pnp.c +++ b/drivers/tty/serial/8250/8250_pnp.c @@ -370,14 +370,14 @@ static const struct pnp_device_id pnp_dev_table[] = { MODULE_DEVICE_TABLE(pnp, pnp_dev_table); -static char *modem_names[] __devinitdata = { +static char *modem_names[] = { "MODEM", "Modem", "modem", "FAX", "Fax", "fax", "56K", "56k", "K56", "33.6", "28.8", "14.4", "33,600", "28,800", "14,400", "33.600", "28.800", "14.400", "33600", "28800", "14400", "V.90", "V.34", "V.32", NULL }; -static int __devinit check_name(char *name) +static int check_name(char *name) { char **tmp; @@ -388,7 +388,7 @@ static int __devinit check_name(char *name) return 0; } -static int __devinit check_resources(struct pnp_dev *dev) +static int check_resources(struct pnp_dev *dev) { resource_size_t base[] = {0x2f8, 0x3f8, 0x2e8, 0x3e8}; int i; @@ -412,7 +412,7 @@ static int __devinit check_resources(struct pnp_dev *dev) * PnP modems, alternatively we must hardcode all modems in pnp_devices[] * table. */ -static int __devinit serial_pnp_guess_board(struct pnp_dev *dev) +static int serial_pnp_guess_board(struct pnp_dev *dev) { if (!(check_name(pnp_dev_name(dev)) || (dev->card && check_name(dev->card->name)))) @@ -424,7 +424,7 @@ static int __devinit serial_pnp_guess_board(struct pnp_dev *dev) return -ENODEV; } -static int __devinit +static int serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id) { struct uart_8250_port uart; @@ -476,7 +476,7 @@ serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id) return 0; } -static void __devexit serial_pnp_remove(struct pnp_dev *dev) +static void serial_pnp_remove(struct pnp_dev *dev) { long line = (long)pnp_get_drvdata(dev); if (line) @@ -511,7 +511,7 @@ static int serial_pnp_resume(struct pnp_dev *dev) static struct pnp_driver serial_pnp_driver = { .name = "serial", .probe = serial_pnp_probe, - .remove = __devexit_p(serial_pnp_remove), + .remove = serial_pnp_remove, .suspend = serial_pnp_suspend, .resume = serial_pnp_resume, .id_table = pnp_dev_table, diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 2a53be5f010..59c23d03810 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -93,7 +93,7 @@ config SERIAL_SB1250_DUART_CONSOLE config SERIAL_ATMEL bool "AT91 / AT32 on-chip serial port support" - depends on (ARM && ARCH_AT91) || AVR32 + depends on ARCH_AT91 || AVR32 select SERIAL_CORE help This enables the driver for the on-chip UARTs of the Atmel @@ -198,7 +198,7 @@ config SERIAL_CLPS711X_CONSOLE config SERIAL_SAMSUNG tristate "Samsung SoC serial support" - depends on ARM && PLAT_SAMSUNG + depends on PLAT_SAMSUNG select SERIAL_CORE help Support for the on-chip UARTs on the Samsung S3C24XX series CPUs, @@ -208,14 +208,14 @@ config SERIAL_SAMSUNG config SERIAL_SAMSUNG_UARTS_4 bool - depends on ARM && PLAT_SAMSUNG + depends on PLAT_SAMSUNG default y if !(CPU_S3C2410 || SERIAL_S3C2412 || CPU_S3C2440 || CPU_S3C2442) help Internal node for the common case of 4 Samsung compatible UARTs config SERIAL_SAMSUNG_UARTS int - depends on ARM && PLAT_SAMSUNG + depends on PLAT_SAMSUNG default 6 if ARCH_S5P6450 default 4 if SERIAL_SAMSUNG_UARTS_4 || CPU_S3C2416 default 3 @@ -249,7 +249,7 @@ config SERIAL_SAMSUNG_CONSOLE config SERIAL_SIRFSOC tristate "SiRF SoC Platform Serial port support" - depends on ARM && ARCH_PRIMA2 + depends on ARCH_PRIMA2 select SERIAL_CORE help Support for the on-chip UART on the CSR SiRFprimaII series, @@ -347,7 +347,7 @@ config SERIAL_ZS_CONSOLE config SERIAL_21285 tristate "DC21285 serial port support" - depends on ARM && FOOTBRIDGE + depends on FOOTBRIDGE select SERIAL_CORE help If you have a machine based on a 21285 (Footbridge) StrongARM(R)/ @@ -371,7 +371,7 @@ config SERIAL_21285_CONSOLE config SERIAL_MPSC bool "Marvell MPSC serial port support" - depends on PPC32 && MV64X60 + depends on MV64X60 select SERIAL_CORE help Say Y here if you want to use the Marvell MPSC serial controller. @@ -408,7 +408,7 @@ config SERIAL_PXA_CONSOLE config SERIAL_SA1100 bool "SA1100 serial port support" - depends on ARM && ARCH_SA1100 + depends on ARCH_SA1100 select SERIAL_CORE help If you have a machine based on a SA1100/SA1110 StrongARM(R) CPU you @@ -716,7 +716,7 @@ config SERIAL_SH_SCI_DMA config SERIAL_PNX8XXX bool "Enable PNX8XXX SoCs' UART Support" - depends on MIPS && (SOC_PNX8550 || SOC_PNX833X) + depends on SOC_PNX8550 || SOC_PNX833X select SERIAL_CORE help If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330 @@ -1013,7 +1013,7 @@ config SERIAL_SGI_IOC3 config SERIAL_MSM bool "MSM on-chip serial port support" - depends on ARM && ARCH_MSM + depends on ARCH_MSM select SERIAL_CORE config SERIAL_MSM_CONSOLE @@ -1035,7 +1035,7 @@ config SERIAL_MSM_HS config SERIAL_VT8500 bool "VIA VT8500 on-chip serial port support" - depends on ARM && ARCH_VT8500 + depends on ARCH_VT8500 select SERIAL_CORE config SERIAL_VT8500_CONSOLE @@ -1045,7 +1045,7 @@ config SERIAL_VT8500_CONSOLE config SERIAL_NETX tristate "NetX serial port support" - depends on ARM && ARCH_NETX + depends on ARCH_NETX select SERIAL_CORE help If you have a machine based on a Hilscher NetX SoC you @@ -1376,6 +1376,7 @@ config SERIAL_MXS_AUART_CONSOLE config SERIAL_XILINX_PS_UART tristate "Xilinx PS UART support" + depends on OF select SERIAL_CORE help This driver supports the Xilinx PS UART port. @@ -1423,4 +1424,27 @@ config SERIAL_EFM32_UART_CONSOLE depends on SERIAL_EFM32_UART=y select SERIAL_CORE_CONSOLE +config SERIAL_ARC + tristate "ARC UART driver support" + select SERIAL_CORE + help + Driver for on-chip UART for ARC(Synopsys) for the legacy + FPGA Boards (ML50x/ARCAngel4) + +config SERIAL_ARC_CONSOLE + bool "Console on ARC UART" + depends on SERIAL_ARC=y + select SERIAL_CORE_CONSOLE + help + Enable system Console on ARC UART + +config SERIAL_ARC_NR_PORTS + int "Number of ARC UART ports" + depends on SERIAL_ARC + range 1 3 + default "1" + help + Set this to the number of serial ports you want the driver + to support. + endmenu diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile index 4f694dafa71..df1b998c436 100644 --- a/drivers/tty/serial/Makefile +++ b/drivers/tty/serial/Makefile @@ -82,3 +82,4 @@ obj-$(CONFIG_SERIAL_XILINX_PS_UART) += xilinx_uartps.o obj-$(CONFIG_SERIAL_SIRFSOC) += sirfsoc_uart.o obj-$(CONFIG_SERIAL_AR933X) += ar933x_uart.o obj-$(CONFIG_SERIAL_EFM32_UART) += efm32-uart.o +obj-$(CONFIG_SERIAL_ARC) += arc_uart.o diff --git a/drivers/tty/serial/altera_jtaguart.c b/drivers/tty/serial/altera_jtaguart.c index 530181e49f6..872f14ae43d 100644 --- a/drivers/tty/serial/altera_jtaguart.c +++ b/drivers/tty/serial/altera_jtaguart.c @@ -406,7 +406,7 @@ static struct uart_driver altera_jtaguart_driver = { .cons = ALTERA_JTAGUART_CONSOLE, }; -static int __devinit altera_jtaguart_probe(struct platform_device *pdev) +static int altera_jtaguart_probe(struct platform_device *pdev) { struct altera_jtaguart_platform_uart *platp = pdev->dev.platform_data; struct uart_port *port; @@ -453,7 +453,7 @@ static int __devinit altera_jtaguart_probe(struct platform_device *pdev) return 0; } -static int __devexit altera_jtaguart_remove(struct platform_device *pdev) +static int altera_jtaguart_remove(struct platform_device *pdev) { struct uart_port *port; int i = pdev->id; @@ -477,7 +477,7 @@ MODULE_DEVICE_TABLE(of, altera_jtaguart_match); static struct platform_driver altera_jtaguart_platform_driver = { .probe = altera_jtaguart_probe, - .remove = __devexit_p(altera_jtaguart_remove), + .remove = altera_jtaguart_remove, .driver = { .name = DRV_NAME, .owner = THIS_MODULE, diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c index 15d80b9fb30..684a0808e1c 100644 --- a/drivers/tty/serial/altera_uart.c +++ b/drivers/tty/serial/altera_uart.c @@ -532,7 +532,7 @@ static int altera_uart_get_of_uartclk(struct platform_device *pdev, } #endif /* CONFIG_OF */ -static int __devinit altera_uart_probe(struct platform_device *pdev) +static int altera_uart_probe(struct platform_device *pdev) { struct altera_uart_platform_uart *platp = pdev->dev.platform_data; struct uart_port *port; @@ -598,7 +598,7 @@ static int __devinit altera_uart_probe(struct platform_device *pdev) return 0; } -static int __devexit altera_uart_remove(struct platform_device *pdev) +static int altera_uart_remove(struct platform_device *pdev) { struct uart_port *port = platform_get_drvdata(pdev); @@ -621,7 +621,7 @@ MODULE_DEVICE_TABLE(of, altera_uart_match); static struct platform_driver altera_uart_platform_driver = { .probe = altera_uart_probe, - .remove = __devexit_p(altera_uart_remove), + .remove = altera_uart_remove, .driver = { .name = DRV_NAME, .owner = THIS_MODULE, diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index d7e1edec50b..7fca4022a8b 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -56,8 +56,7 @@ #include <linux/of_device.h> #include <linux/pinctrl/consumer.h> #include <linux/sizes.h> - -#include <asm/io.h> +#include <linux/io.h> #define UART_NR 14 @@ -1973,7 +1972,8 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id) goto out; } - uap = kzalloc(sizeof(struct uart_amba_port), GFP_KERNEL); + uap = devm_kzalloc(&dev->dev, sizeof(struct uart_amba_port), + GFP_KERNEL); if (uap == NULL) { ret = -ENOMEM; goto out; @@ -1981,16 +1981,17 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id) i = pl011_probe_dt_alias(i, &dev->dev); - base = ioremap(dev->res.start, resource_size(&dev->res)); + base = devm_ioremap(&dev->dev, dev->res.start, + resource_size(&dev->res)); if (!base) { ret = -ENOMEM; - goto free; + goto out; } uap->pinctrl = devm_pinctrl_get(&dev->dev); if (IS_ERR(uap->pinctrl)) { ret = PTR_ERR(uap->pinctrl); - goto unmap; + goto out; } uap->pins_default = pinctrl_lookup_state(uap->pinctrl, PINCTRL_STATE_DEFAULT); @@ -2002,10 +2003,10 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id) if (IS_ERR(uap->pins_sleep)) dev_dbg(&dev->dev, "could not get sleep pinstate\n"); - uap->clk = clk_get(&dev->dev, NULL); + uap->clk = devm_clk_get(&dev->dev, NULL); if (IS_ERR(uap->clk)) { ret = PTR_ERR(uap->clk); - goto unmap; + goto out; } uap->vendor = vendor; @@ -2038,11 +2039,6 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id) amba_set_drvdata(dev, NULL); amba_ports[i] = NULL; pl011_dma_remove(uap); - clk_put(uap->clk); - unmap: - iounmap(base); - free: - kfree(uap); } out: return ret; @@ -2062,9 +2058,6 @@ static int pl011_remove(struct amba_device *dev) amba_ports[i] = NULL; pl011_dma_remove(uap); - iounmap(uap->port.membase); - clk_put(uap->clk); - kfree(uap); return 0; } diff --git a/drivers/tty/serial/apbuart.c b/drivers/tty/serial/apbuart.c index 7162f70d926..59ae2b53e76 100644 --- a/drivers/tty/serial/apbuart.c +++ b/drivers/tty/serial/apbuart.c @@ -554,7 +554,7 @@ static struct uart_driver grlib_apbuart_driver = { /* OF Platform Driver */ /* ======================================================================== */ -static int __devinit apbuart_probe(struct platform_device *op) +static int apbuart_probe(struct platform_device *op) { int i; struct uart_port *port = NULL; diff --git a/drivers/tty/serial/ar933x_uart.c b/drivers/tty/serial/ar933x_uart.c index e4f60e2b87f..505c490c0b4 100644 --- a/drivers/tty/serial/ar933x_uart.c +++ b/drivers/tty/serial/ar933x_uart.c @@ -25,11 +25,19 @@ #include <linux/io.h> #include <linux/irq.h> +#include <asm/div64.h> + #include <asm/mach-ath79/ar933x_uart.h> #include <asm/mach-ath79/ar933x_uart_platform.h> #define DRIVER_NAME "ar933x-uart" +#define AR933X_UART_MAX_SCALE 0xff +#define AR933X_UART_MAX_STEP 0xffff + +#define AR933X_UART_MIN_BAUD 300 +#define AR933X_UART_MAX_BAUD 3000000 + #define AR933X_DUMMY_STATUS_RD 0x01 static struct uart_driver ar933x_uart_driver; @@ -37,6 +45,8 @@ static struct uart_driver ar933x_uart_driver; struct ar933x_uart_port { struct uart_port port; unsigned int ier; /* shadow Interrupt Enable Register */ + unsigned int min_baud; + unsigned int max_baud; }; static inline unsigned int ar933x_uart_read(struct ar933x_uart_port *up, @@ -162,6 +172,57 @@ static void ar933x_uart_enable_ms(struct uart_port *port) { } +/* + * baudrate = (clk / (scale + 1)) * (step * (1 / 2^17)) + */ +static unsigned long ar933x_uart_get_baud(unsigned int clk, + unsigned int scale, + unsigned int step) +{ + u64 t; + u32 div; + + div = (2 << 16) * (scale + 1); + t = clk; + t *= step; + t += (div / 2); + do_div(t, div); + + return t; +} + +static void ar933x_uart_get_scale_step(unsigned int clk, + unsigned int baud, + unsigned int *scale, + unsigned int *step) +{ + unsigned int tscale; + long min_diff; + + *scale = 0; + *step = 0; + + min_diff = baud; + for (tscale = 0; tscale < AR933X_UART_MAX_SCALE; tscale++) { + u64 tstep; + int diff; + + tstep = baud * (tscale + 1); + tstep *= (2 << 16); + do_div(tstep, clk); + + if (tstep > AR933X_UART_MAX_STEP) + break; + + diff = abs(ar933x_uart_get_baud(clk, tscale, tstep) - baud); + if (diff < min_diff) { + min_diff = diff; + *scale = tscale; + *step = tstep; + } + } +} + static void ar933x_uart_set_termios(struct uart_port *port, struct ktermios *new, struct ktermios *old) @@ -169,7 +230,7 @@ static void ar933x_uart_set_termios(struct uart_port *port, struct ar933x_uart_port *up = (struct ar933x_uart_port *) port; unsigned int cs; unsigned long flags; - unsigned int baud, scale; + unsigned int baud, scale, step; /* Only CS8 is supported */ new->c_cflag &= ~CSIZE; @@ -191,8 +252,8 @@ static void ar933x_uart_set_termios(struct uart_port *port, /* Mark/space parity is not supported */ new->c_cflag &= ~CMSPAR; - baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16); - scale = (port->uartclk / (16 * baud)) - 1; + baud = uart_get_baud_rate(port, new, old, up->min_baud, up->max_baud); + ar933x_uart_get_scale_step(port->uartclk, baud, &scale, &step); /* * Ok, we're now changing the port state. Do it with @@ -200,6 +261,10 @@ static void ar933x_uart_set_termios(struct uart_port *port, */ spin_lock_irqsave(&up->port.lock, flags); + /* disable the UART */ + ar933x_uart_rmw_clear(up, AR933X_UART_CS_REG, + AR933X_UART_CS_IF_MODE_M << AR933X_UART_CS_IF_MODE_S); + /* Update the per-port timeout. */ uart_update_timeout(port, new->c_cflag, baud); @@ -210,7 +275,7 @@ static void ar933x_uart_set_termios(struct uart_port *port, up->port.ignore_status_mask |= AR933X_DUMMY_STATUS_RD; ar933x_uart_write(up, AR933X_UART_CLOCK_REG, - scale << AR933X_UART_CLOCK_SCALE_S | 8192); + scale << AR933X_UART_CLOCK_SCALE_S | step); /* setup configuration register */ ar933x_uart_rmw(up, AR933X_UART_CS_REG, AR933X_UART_CS_PARITY_M, cs); @@ -219,6 +284,11 @@ static void ar933x_uart_set_termios(struct uart_port *port, ar933x_uart_rmw_set(up, AR933X_UART_CS_REG, AR933X_UART_CS_HOST_INT_EN); + /* reenable the UART */ + ar933x_uart_rmw(up, AR933X_UART_CS_REG, + AR933X_UART_CS_IF_MODE_M << AR933X_UART_CS_IF_MODE_S, + AR933X_UART_CS_IF_MODE_DCE << AR933X_UART_CS_IF_MODE_S); + spin_unlock_irqrestore(&up->port.lock, flags); if (tty_termios_baud_rate(new)) @@ -401,6 +471,8 @@ static void ar933x_uart_config_port(struct uart_port *port, int flags) static int ar933x_uart_verify_port(struct uart_port *port, struct serial_struct *ser) { + struct ar933x_uart_port *up = (struct ar933x_uart_port *) port; + if (ser->type != PORT_UNKNOWN && ser->type != PORT_AR933X) return -EINVAL; @@ -408,7 +480,8 @@ static int ar933x_uart_verify_port(struct uart_port *port, if (ser->irq < 0 || ser->irq >= NR_IRQS) return -EINVAL; - if (ser->baud_base < 28800) + if (ser->baud_base < up->min_baud || + ser->baud_base > up->max_baud) return -EINVAL; return 0; @@ -554,13 +627,14 @@ static struct uart_driver ar933x_uart_driver = { .cons = AR933X_SERIAL_CONSOLE, }; -static int __devinit ar933x_uart_probe(struct platform_device *pdev) +static int ar933x_uart_probe(struct platform_device *pdev) { struct ar933x_uart_platform_data *pdata; struct ar933x_uart_port *up; struct uart_port *port; struct resource *mem_res; struct resource *irq_res; + unsigned int baud; int id; int ret; @@ -611,6 +685,12 @@ static int __devinit ar933x_uart_probe(struct platform_device *pdev) port->fifosize = AR933X_UART_FIFO_SIZE; port->ops = &ar933x_uart_ops; + baud = ar933x_uart_get_baud(port->uartclk, AR933X_UART_MAX_SCALE, 1); + up->min_baud = max_t(unsigned int, baud, AR933X_UART_MIN_BAUD); + + baud = ar933x_uart_get_baud(port->uartclk, 0, AR933X_UART_MAX_STEP); + up->max_baud = min_t(unsigned int, baud, AR933X_UART_MAX_BAUD); + ar933x_uart_add_console_port(up); ret = uart_add_one_port(&ar933x_uart_driver, &up->port); @@ -627,7 +707,7 @@ err_free_up: return ret; } -static int __devexit ar933x_uart_remove(struct platform_device *pdev) +static int ar933x_uart_remove(struct platform_device *pdev) { struct ar933x_uart_port *up; @@ -645,7 +725,7 @@ static int __devexit ar933x_uart_remove(struct platform_device *pdev) static struct platform_driver ar933x_uart_platform_driver = { .probe = ar933x_uart_probe, - .remove = __devexit_p(ar933x_uart_remove), + .remove = ar933x_uart_remove, .driver = { .name = DRIVER_NAME, .owner = THIS_MODULE, diff --git a/drivers/tty/serial/arc_uart.c b/drivers/tty/serial/arc_uart.c new file mode 100644 index 00000000000..3e0b3fac6a0 --- /dev/null +++ b/drivers/tty/serial/arc_uart.c @@ -0,0 +1,746 @@ +/* + * ARC On-Chip(fpga) UART Driver + * + * Copyright (C) 2010-2012 Synopsys, Inc. (www.synopsys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * vineetg: July 10th 2012 + * -Decoupled the driver from arch/arc + * +Using platform_get_resource() for irq/membase (thx to bfin_uart.c) + * +Using early_platform_xxx() for early console (thx to mach-shmobile/xxx) + * + * Vineetg: Aug 21st 2010 + * -Is uart_tx_stopped() not done in tty write path as it has already been + * taken care of, in serial core + * + * Vineetg: Aug 18th 2010 + * -New Serial Core based ARC UART driver + * -Derived largely from blackfin driver albiet with some major tweaks + * + * TODO: + * -check if sysreq works + */ + +#if defined(CONFIG_SERIAL_ARC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include <linux/module.h> +#include <linux/serial.h> +#include <linux/console.h> +#include <linux/sysrq.h> +#include <linux/platform_device.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> +#include <linux/serial_core.h> +#include <linux/io.h> + +/************************************* + * ARC UART Hardware Specs + ************************************/ +#define ARC_UART_TX_FIFO_SIZE 1 + +/* + * UART Register set (this is not a Standards Compliant IP) + * Also each reg is Word aligned, but only 8 bits wide + */ +#define R_ID0 0 +#define R_ID1 4 +#define R_ID2 8 +#define R_ID3 12 +#define R_DATA 16 +#define R_STS 20 +#define R_BAUDL 24 +#define R_BAUDH 28 + +/* Bits for UART Status Reg (R/W) */ +#define RXIENB 0x04 /* Receive Interrupt Enable */ +#define TXIENB 0x40 /* Transmit Interrupt Enable */ + +#define RXEMPTY 0x20 /* Receive FIFO Empty: No char receivede */ +#define TXEMPTY 0x80 /* Transmit FIFO Empty, thus char can be written into */ + +#define RXFULL 0x08 /* Receive FIFO full */ +#define RXFULL1 0x10 /* Receive FIFO has space for 1 char (tot space=4) */ + +#define RXFERR 0x01 /* Frame Error: Stop Bit not detected */ +#define RXOERR 0x02 /* OverFlow Err: Char recv but RXFULL still set */ + +/* Uart bit fiddling helpers: lowest level */ +#define RBASE(uart, reg) (uart->port.membase + reg) +#define UART_REG_SET(u, r, v) writeb((v), RBASE(u, r)) +#define UART_REG_GET(u, r) readb(RBASE(u, r)) + +#define UART_REG_OR(u, r, v) UART_REG_SET(u, r, UART_REG_GET(u, r) | (v)) +#define UART_REG_CLR(u, r, v) UART_REG_SET(u, r, UART_REG_GET(u, r) & ~(v)) + +/* Uart bit fiddling helpers: API level */ +#define UART_SET_DATA(uart, val) UART_REG_SET(uart, R_DATA, val) +#define UART_GET_DATA(uart) UART_REG_GET(uart, R_DATA) + +#define UART_SET_BAUDH(uart, val) UART_REG_SET(uart, R_BAUDH, val) +#define UART_SET_BAUDL(uart, val) UART_REG_SET(uart, R_BAUDL, val) + +#define UART_CLR_STATUS(uart, val) UART_REG_CLR(uart, R_STS, val) +#define UART_GET_STATUS(uart) UART_REG_GET(uart, R_STS) + +#define UART_ALL_IRQ_DISABLE(uart) UART_REG_CLR(uart, R_STS, RXIENB|TXIENB) +#define UART_RX_IRQ_DISABLE(uart) UART_REG_CLR(uart, R_STS, RXIENB) +#define UART_TX_IRQ_DISABLE(uart) UART_REG_CLR(uart, R_STS, TXIENB) + +#define UART_ALL_IRQ_ENABLE(uart) UART_REG_OR(uart, R_STS, RXIENB|TXIENB) +#define UART_RX_IRQ_ENABLE(uart) UART_REG_OR(uart, R_STS, RXIENB) +#define UART_TX_IRQ_ENABLE(uart) UART_REG_OR(uart, R_STS, TXIENB) + +#define ARC_SERIAL_DEV_NAME "ttyARC" + +struct arc_uart_port { + struct uart_port port; + unsigned long baud; + int is_emulated; /* H/w vs. Instruction Set Simulator */ +}; + +#define to_arc_port(uport) container_of(uport, struct arc_uart_port, port) + +static struct arc_uart_port arc_uart_ports[CONFIG_SERIAL_ARC_NR_PORTS]; + +#ifdef CONFIG_SERIAL_ARC_CONSOLE +static struct console arc_console; +#endif + +#define DRIVER_NAME "arc-uart" + +static struct uart_driver arc_uart_driver = { + .owner = THIS_MODULE, + .driver_name = DRIVER_NAME, + .dev_name = ARC_SERIAL_DEV_NAME, + .major = 0, + .minor = 0, + .nr = CONFIG_SERIAL_ARC_NR_PORTS, +#ifdef CONFIG_SERIAL_ARC_CONSOLE + .cons = &arc_console, +#endif +}; + +static void arc_serial_stop_rx(struct uart_port *port) +{ + struct arc_uart_port *uart = to_arc_port(port); + + UART_RX_IRQ_DISABLE(uart); +} + +static void arc_serial_stop_tx(struct uart_port *port) +{ + struct arc_uart_port *uart = to_arc_port(port); + + while (!(UART_GET_STATUS(uart) & TXEMPTY)) + cpu_relax(); + + UART_TX_IRQ_DISABLE(uart); +} + +/* + * Return TIOCSER_TEMT when transmitter is not busy. + */ +static unsigned int arc_serial_tx_empty(struct uart_port *port) +{ + struct arc_uart_port *uart = to_arc_port(port); + unsigned int stat; + + stat = UART_GET_STATUS(uart); + if (stat & TXEMPTY) + return TIOCSER_TEMT; + + return 0; +} + +/* + * Driver internal routine, used by both tty(serial core) as well as tx-isr + * -Called under spinlock in either cases + * -also tty->stopped / tty->hw_stopped has already been checked + * = by uart_start( ) before calling us + * = tx_ist checks that too before calling + */ +static void arc_serial_tx_chars(struct arc_uart_port *uart) +{ + struct circ_buf *xmit = &uart->port.state->xmit; + int sent = 0; + unsigned char ch; + + if (unlikely(uart->port.x_char)) { + UART_SET_DATA(uart, uart->port.x_char); + uart->port.icount.tx++; + uart->port.x_char = 0; + sent = 1; + } else if (xmit->tail != xmit->head) { /* TODO: uart_circ_empty */ + ch = xmit->buf[xmit->tail]; + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + uart->port.icount.tx++; + while (!(UART_GET_STATUS(uart) & TXEMPTY)) + cpu_relax(); + UART_SET_DATA(uart, ch); + sent = 1; + } + + /* + * If num chars in xmit buffer are too few, ask tty layer for more. + * By Hard ISR to schedule processing in software interrupt part + */ + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&uart->port); + + if (sent) + UART_TX_IRQ_ENABLE(uart); +} + +/* + * port is locked and interrupts are disabled + * uart_start( ) calls us under the port spinlock irqsave + */ +static void arc_serial_start_tx(struct uart_port *port) +{ + struct arc_uart_port *uart = to_arc_port(port); + + arc_serial_tx_chars(uart); +} + +static void arc_serial_rx_chars(struct arc_uart_port *uart) +{ + struct tty_struct *tty = tty_port_tty_get(&uart->port.state->port); + unsigned int status, ch, flg = 0; + + if (!tty) + return; + + /* + * UART has 4 deep RX-FIFO. Driver's recongnition of this fact + * is very subtle. Here's how ... + * Upon getting a RX-Intr, such that RX-EMPTY=0, meaning data available, + * driver reads the DATA Reg and keeps doing that in a loop, until + * RX-EMPTY=1. Multiple chars being avail, with a single Interrupt, + * before RX-EMPTY=0, implies some sort of buffering going on in the + * controller, which is indeed the Rx-FIFO. + */ + while (!((status = UART_GET_STATUS(uart)) & RXEMPTY)) { + + ch = UART_GET_DATA(uart); + uart->port.icount.rx++; + + if (unlikely(status & (RXOERR | RXFERR))) { + if (status & RXOERR) { + uart->port.icount.overrun++; + flg = TTY_OVERRUN; + UART_CLR_STATUS(uart, RXOERR); + } + + if (status & RXFERR) { + uart->port.icount.frame++; + flg = TTY_FRAME; + UART_CLR_STATUS(uart, RXFERR); + } + } else + flg = TTY_NORMAL; + + if (unlikely(uart_handle_sysrq_char(&uart->port, ch))) + goto done; + + uart_insert_char(&uart->port, status, RXOERR, ch, flg); + +done: + tty_flip_buffer_push(tty); + } + + tty_kref_put(tty); +} + +/* + * A note on the Interrupt handling state machine of this driver + * + * kernel printk writes funnel thru the console driver framework and in order + * to keep things simple as well as efficient, it writes to UART in polled + * mode, in one shot, and exits. + * + * OTOH, Userland output (via tty layer), uses interrupt based writes as there + * can be undeterministic delay between char writes. + * + * Thus Rx-interrupts are always enabled, while tx-interrupts are by default + * disabled. + * + * When tty has some data to send out, serial core calls driver's start_tx + * which + * -checks-if-tty-buffer-has-char-to-send + * -writes-data-to-uart + * -enable-tx-intr + * + * Once data bits are pushed out, controller raises the Tx-room-avail-Interrupt. + * The first thing Tx ISR does is disable further Tx interrupts (as this could + * be the last char to send, before settling down into the quiet polled mode). + * It then calls the exact routine used by tty layer write to send out any + * more char in tty buffer. In case of sending, it re-enables Tx-intr. In case + * of no data, it remains disabled. + * This is how the transmit state machine is dynamically switched on/off + */ + +static irqreturn_t arc_serial_isr(int irq, void *dev_id) +{ + struct arc_uart_port *uart = dev_id; + unsigned int status; + + status = UART_GET_STATUS(uart); + + /* + * Single IRQ for both Rx (data available) Tx (room available) Interrupt + * notifications from the UART Controller. + * To demultiplex between the two, we check the relevant bits + */ + if ((status & RXIENB) && !(status & RXEMPTY)) { + + /* already in ISR, no need of xx_irqsave */ + spin_lock(&uart->port.lock); + arc_serial_rx_chars(uart); + spin_unlock(&uart->port.lock); + } + + if ((status & TXIENB) && (status & TXEMPTY)) { + + /* Unconditionally disable further Tx-Interrupts. + * will be enabled by tx_chars() if needed. + */ + UART_TX_IRQ_DISABLE(uart); + + spin_lock(&uart->port.lock); + + if (!uart_tx_stopped(&uart->port)) + arc_serial_tx_chars(uart); + + spin_unlock(&uart->port.lock); + } + + return IRQ_HANDLED; +} + +static unsigned int arc_serial_get_mctrl(struct uart_port *port) +{ + /* + * Pretend we have a Modem status reg and following bits are + * always set, to satify the serial core state machine + * (DSR) Data Set Ready + * (CTS) Clear To Send + * (CAR) Carrier Detect + */ + return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; +} + +static void arc_serial_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + /* MCR not present */ +} + +/* Enable Modem Status Interrupts */ + +static void arc_serial_enable_ms(struct uart_port *port) +{ + /* MSR not present */ +} + +static void arc_serial_break_ctl(struct uart_port *port, int break_state) +{ + /* ARC UART doesn't support sending Break signal */ +} + +static int arc_serial_startup(struct uart_port *port) +{ + struct arc_uart_port *uart = to_arc_port(port); + + /* Before we hook up the ISR, Disable all UART Interrupts */ + UART_ALL_IRQ_DISABLE(uart); + + if (request_irq(uart->port.irq, arc_serial_isr, 0, "arc uart rx-tx", + uart)) { + dev_warn(uart->port.dev, "Unable to attach ARC UART intr\n"); + return -EBUSY; + } + + UART_RX_IRQ_ENABLE(uart); /* Only Rx IRQ enabled to begin with */ + + return 0; +} + +/* This is not really needed */ +static void arc_serial_shutdown(struct uart_port *port) +{ + struct arc_uart_port *uart = to_arc_port(port); + free_irq(uart->port.irq, uart); +} + +static void +arc_serial_set_termios(struct uart_port *port, struct ktermios *new, + struct ktermios *old) +{ + struct arc_uart_port *uart = to_arc_port(port); + unsigned int baud, uartl, uarth, hw_val; + unsigned long flags; + + /* + * Use the generic handler so that any specially encoded baud rates + * such as SPD_xx flags or "%B0" can be handled + * Max Baud I suppose will not be more than current 115K * 4 + * Formula for ARC UART is: hw-val = ((CLK/(BAUD*4)) -1) + * spread over two 8-bit registers + */ + baud = uart_get_baud_rate(port, new, old, 0, 460800); + + hw_val = port->uartclk / (uart->baud * 4) - 1; + uartl = hw_val & 0xFF; + uarth = (hw_val >> 8) & 0xFF; + + /* + * UART ISS(Instruction Set simulator) emulation has a subtle bug: + * A existing value of Baudh = 0 is used as a indication to startup + * it's internal state machine. + * Thus if baudh is set to 0, 2 times, it chokes. + * This happens with BAUD=115200 and the formaula above + * Until that is fixed, when running on ISS, we will set baudh to !0 + */ + if (uart->is_emulated) + uarth = 1; + + spin_lock_irqsave(&port->lock, flags); + + UART_ALL_IRQ_DISABLE(uart); + + UART_SET_BAUDL(uart, uartl); + UART_SET_BAUDH(uart, uarth); + + UART_RX_IRQ_ENABLE(uart); + + /* + * UART doesn't support Parity/Hardware Flow Control; + * Only supports 8N1 character size + */ + new->c_cflag &= ~(CMSPAR|CRTSCTS|CSIZE); + new->c_cflag |= CS8; + + if (old) + tty_termios_copy_hw(new, old); + + /* Don't rewrite B0 */ + if (tty_termios_baud_rate(new)) + tty_termios_encode_baud_rate(new, baud, baud); + + uart_update_timeout(port, new->c_cflag, baud); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *arc_serial_type(struct uart_port *port) +{ + struct arc_uart_port *uart = to_arc_port(port); + + return uart->port.type == PORT_ARC ? DRIVER_NAME : NULL; +} + +static void arc_serial_release_port(struct uart_port *port) +{ +} + +static int arc_serial_request_port(struct uart_port *port) +{ + return 0; +} + +/* + * Verify the new serial_struct (for TIOCSSERIAL). + */ +static int +arc_serial_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + if (port->type != PORT_UNKNOWN && ser->type != PORT_ARC) + return -EINVAL; + + return 0; +} + +/* + * Configure/autoconfigure the port. + */ +static void arc_serial_config_port(struct uart_port *port, int flags) +{ + struct arc_uart_port *uart = to_arc_port(port); + + if (flags & UART_CONFIG_TYPE) + uart->port.type = PORT_ARC; +} + +#if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_ARC_CONSOLE) + +static void arc_serial_poll_putchar(struct uart_port *port, unsigned char chr) +{ + struct arc_uart_port *uart = to_arc_port(port); + + while (!(UART_GET_STATUS(uart) & TXEMPTY)) + cpu_relax(); + + UART_SET_DATA(uart, chr); +} +#endif + +#ifdef CONFIG_CONSOLE_POLL +static int arc_serial_poll_getchar(struct uart_port *port) +{ + struct arc_uart_port *uart = to_arc_port(port); + unsigned char chr; + + while (!(UART_GET_STATUS(uart) & RXEMPTY)) + cpu_relax(); + + chr = UART_GET_DATA(uart); + return chr; +} +#endif + +static struct uart_ops arc_serial_pops = { + .tx_empty = arc_serial_tx_empty, + .set_mctrl = arc_serial_set_mctrl, + .get_mctrl = arc_serial_get_mctrl, + .stop_tx = arc_serial_stop_tx, + .start_tx = arc_serial_start_tx, + .stop_rx = arc_serial_stop_rx, + .enable_ms = arc_serial_enable_ms, + .break_ctl = arc_serial_break_ctl, + .startup = arc_serial_startup, + .shutdown = arc_serial_shutdown, + .set_termios = arc_serial_set_termios, + .type = arc_serial_type, + .release_port = arc_serial_release_port, + .request_port = arc_serial_request_port, + .config_port = arc_serial_config_port, + .verify_port = arc_serial_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_put_char = arc_serial_poll_putchar, + .poll_get_char = arc_serial_poll_getchar, +#endif +}; + +static int +arc_uart_init_one(struct platform_device *pdev, struct arc_uart_port *uart) +{ + struct resource *res, *res2; + unsigned long *plat_data; + + if (pdev->id < 0 || pdev->id >= CONFIG_SERIAL_ARC_NR_PORTS) { + dev_err(&pdev->dev, "Wrong uart platform device id.\n"); + return -ENOENT; + } + + plat_data = ((unsigned long *)(pdev->dev.platform_data)); + uart->baud = plat_data[0]; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENODEV; + + res2 = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!res2) + return -ENODEV; + + uart->port.mapbase = res->start; + uart->port.membase = ioremap_nocache(res->start, resource_size(res)); + if (!uart->port.membase) + /* No point of dev_err since UART itself is hosed here */ + return -ENXIO; + + uart->port.irq = res2->start; + uart->port.dev = &pdev->dev; + uart->port.iotype = UPIO_MEM; + uart->port.flags = UPF_BOOT_AUTOCONF; + uart->port.line = pdev->id; + uart->port.ops = &arc_serial_pops; + + uart->port.uartclk = plat_data[1]; + uart->port.fifosize = ARC_UART_TX_FIFO_SIZE; + + /* + * uart_insert_char( ) uses it in decideding whether to ignore a + * char or not. Explicitly setting it here, removes the subtelty + */ + uart->port.ignore_status_mask = 0; + + /* Real Hardware vs. emulated to work around a bug */ + uart->is_emulated = !!plat_data[2]; + + return 0; +} + +#ifdef CONFIG_SERIAL_ARC_CONSOLE + +static int arc_serial_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (co->index < 0 || co->index >= CONFIG_SERIAL_ARC_NR_PORTS) + return -ENODEV; + + /* + * The uart port backing the console (e.g. ttyARC1) might not have been + * init yet. If so, defer the console setup to after the port. + */ + port = &arc_uart_ports[co->index].port; + if (!port->membase) + return -ENODEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + /* + * Serial core will call port->ops->set_termios( ) + * which will set the baud reg + */ + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static void arc_serial_console_putchar(struct uart_port *port, int ch) +{ + arc_serial_poll_putchar(port, (unsigned char)ch); +} + +/* + * Interrupts are disabled on entering + */ +static void arc_serial_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct uart_port *port = &arc_uart_ports[co->index].port; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + uart_console_write(port, s, count, arc_serial_console_putchar); + spin_unlock_irqrestore(&port->lock, flags); +} + +static struct console arc_console = { + .name = ARC_SERIAL_DEV_NAME, + .write = arc_serial_console_write, + .device = uart_console_device, + .setup = arc_serial_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &arc_uart_driver +}; + +static __init void early_serial_write(struct console *con, const char *s, + unsigned int n) +{ + struct uart_port *port = &arc_uart_ports[con->index].port; + unsigned int i; + + for (i = 0; i < n; i++, s++) { + if (*s == '\n') + arc_serial_poll_putchar(port, '\r'); + arc_serial_poll_putchar(port, *s); + } +} + +static struct __initdata console arc_early_serial_console = { + .name = "early_ARCuart", + .write = early_serial_write, + .flags = CON_PRINTBUFFER | CON_BOOT, + .index = -1 +}; + +static int arc_serial_probe_earlyprintk(struct platform_device *pdev) +{ + arc_early_serial_console.index = pdev->id; + + arc_uart_init_one(pdev, &arc_uart_ports[pdev->id]); + + arc_serial_console_setup(&arc_early_serial_console, NULL); + + register_console(&arc_early_serial_console); + return 0; +} +#else +static int arc_serial_probe_earlyprintk(struct platform_device *pdev) +{ + return -ENODEV; +} +#endif /* CONFIG_SERIAL_ARC_CONSOLE */ + +static int arc_serial_probe(struct platform_device *pdev) +{ + struct arc_uart_port *uart; + int rc; + + if (is_early_platform_device(pdev)) + return arc_serial_probe_earlyprintk(pdev); + + uart = &arc_uart_ports[pdev->id]; + rc = arc_uart_init_one(pdev, uart); + if (rc) + return rc; + + return uart_add_one_port(&arc_uart_driver, &uart->port); +} + +static int arc_serial_remove(struct platform_device *pdev) +{ + /* This will never be called */ + return 0; +} + +static struct platform_driver arc_platform_driver = { + .probe = arc_serial_probe, + .remove = arc_serial_remove, + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + }, +}; + +#ifdef CONFIG_SERIAL_ARC_CONSOLE +/* + * Register an early platform driver of "earlyprintk" class. + * ARCH platform code installs the driver and probes the early devices + * The installation could rely on user specifying earlyprintk=xyx in cmd line + * or it could be done independently, for all "earlyprintk" class drivers. + * [see arch/arc/plat-arcfpga/platform.c] + */ +early_platform_init("earlyprintk", &arc_platform_driver); + +#endif /* CONFIG_SERIAL_ARC_CONSOLE */ + +static int __init arc_serial_init(void) +{ + int ret; + + ret = uart_register_driver(&arc_uart_driver); + if (ret) + return ret; + + ret = platform_driver_register(&arc_platform_driver); + if (ret) + uart_unregister_driver(&arc_uart_driver); + + return ret; +} + +static void __exit arc_serial_exit(void) +{ + platform_driver_unregister(&arc_platform_driver); + uart_unregister_driver(&arc_uart_driver); +} + +module_init(arc_serial_init); +module_exit(arc_serial_exit); + +MODULE_LICENSE("GPL"); +MODULE_ALIAS("plat-arcfpga/uart"); +MODULE_AUTHOR("Vineet Gupta"); +MODULE_DESCRIPTION("ARC(Synopsys) On-Chip(fpga) serial driver"); diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 65f891be12d..b95886c1198 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -1424,7 +1424,7 @@ static struct uart_ops atmel_pops = { #endif }; -static void __devinit atmel_of_init_port(struct atmel_uart_port *atmel_port, +static void atmel_of_init_port(struct atmel_uart_port *atmel_port, struct device_node *np) { u32 rs485_delay[2]; @@ -1459,7 +1459,7 @@ static void __devinit atmel_of_init_port(struct atmel_uart_port *atmel_port, /* * Configure the port from the platform device resource info. */ -static void __devinit atmel_init_port(struct atmel_uart_port *atmel_port, +static void atmel_init_port(struct atmel_uart_port *atmel_port, struct platform_device *pdev) { struct uart_port *port = &atmel_port->uart; @@ -1767,7 +1767,7 @@ static int atmel_serial_resume(struct platform_device *pdev) #define atmel_serial_resume NULL #endif -static int __devinit atmel_serial_probe(struct platform_device *pdev) +static int atmel_serial_probe(struct platform_device *pdev) { struct atmel_uart_port *port; struct device_node *np = pdev->dev.of_node; @@ -1859,7 +1859,7 @@ err: return ret; } -static int __devexit atmel_serial_remove(struct platform_device *pdev) +static int atmel_serial_remove(struct platform_device *pdev) { struct uart_port *port = platform_get_drvdata(pdev); struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); @@ -1884,7 +1884,7 @@ static int __devexit atmel_serial_remove(struct platform_device *pdev) static struct platform_driver atmel_serial_driver = { .probe = atmel_serial_probe, - .remove = __devexit_p(atmel_serial_remove), + .remove = atmel_serial_remove, .suspend = atmel_serial_suspend, .resume = atmel_serial_resume, .driver = { diff --git a/drivers/tty/serial/bcm63xx_uart.c b/drivers/tty/serial/bcm63xx_uart.c index c0b68b9cad9..c76a226080f 100644 --- a/drivers/tty/serial/bcm63xx_uart.c +++ b/drivers/tty/serial/bcm63xx_uart.c @@ -801,7 +801,7 @@ static struct uart_driver bcm_uart_driver = { /* * platform driver probe/remove callback */ -static int __devinit bcm_uart_probe(struct platform_device *pdev) +static int bcm_uart_probe(struct platform_device *pdev) { struct resource *res_mem, *res_irq; struct uart_port *port; @@ -848,7 +848,7 @@ static int __devinit bcm_uart_probe(struct platform_device *pdev) return 0; } -static int __devexit bcm_uart_remove(struct platform_device *pdev) +static int bcm_uart_remove(struct platform_device *pdev) { struct uart_port *port; @@ -865,7 +865,7 @@ static int __devexit bcm_uart_remove(struct platform_device *pdev) */ static struct platform_driver bcm_uart_platform_driver = { .probe = bcm_uart_probe, - .remove = __devexit_p(bcm_uart_remove), + .remove = bcm_uart_remove, .driver = { .owner = THIS_MODULE, .name = "bcm63xx_uart", diff --git a/drivers/tty/serial/bfin_sport_uart.c b/drivers/tty/serial/bfin_sport_uart.c index 7fbc3a08f10..f5d117379b6 100644 --- a/drivers/tty/serial/bfin_sport_uart.c +++ b/drivers/tty/serial/bfin_sport_uart.c @@ -740,7 +740,7 @@ static struct dev_pm_ops bfin_sport_uart_dev_pm_ops = { }; #endif -static int __devinit sport_uart_probe(struct platform_device *pdev) +static int sport_uart_probe(struct platform_device *pdev) { struct resource *res; struct sport_uart_port *sport; @@ -850,7 +850,7 @@ out_error_free_mem: return ret; } -static int __devexit sport_uart_remove(struct platform_device *pdev) +static int sport_uart_remove(struct platform_device *pdev) { struct sport_uart_port *sport = platform_get_drvdata(pdev); @@ -871,7 +871,7 @@ static int __devexit sport_uart_remove(struct platform_device *pdev) static struct platform_driver sport_uart_driver = { .probe = sport_uart_probe, - .remove = __devexit_p(sport_uart_remove), + .remove = sport_uart_remove, .driver = { .name = DRV_NAME, #ifdef CONFIG_PM diff --git a/drivers/tty/serial/bfin_uart.c b/drivers/tty/serial/bfin_uart.c index 9242d56ba26..e6a008f4939 100644 --- a/drivers/tty/serial/bfin_uart.c +++ b/drivers/tty/serial/bfin_uart.c @@ -477,9 +477,9 @@ static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart) void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart) { int x_pos, pos; + unsigned long flags; - dma_disable_irq_nosync(uart->rx_dma_channel); - spin_lock_bh(&uart->rx_lock); + spin_lock_irqsave(&uart->rx_lock, flags); /* 2D DMA RX buffer ring is used. Because curr_y_count and * curr_x_count can't be read as an atomic operation, @@ -510,8 +510,7 @@ void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart) uart->rx_dma_buf.tail = uart->rx_dma_buf.head; } - spin_unlock_bh(&uart->rx_lock); - dma_enable_irq(uart->rx_dma_channel); + spin_unlock_irqrestore(&uart->rx_lock, flags); mod_timer(&(uart->rx_dma_timer), jiffies + DMA_RX_FLUSH_JIFFIES); } @@ -800,6 +799,7 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios, unsigned long flags; unsigned int baud, quot; unsigned int ier, lcr = 0; + unsigned long timeout; switch (termios->c_cflag & CSIZE) { case CS8: @@ -869,6 +869,14 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios, UART_SET_ANOMALY_THRESHOLD(uart, USEC_PER_SEC / baud * 15); + /* Wait till the transfer buffer is empty */ + timeout = jiffies + msecs_to_jiffies(10); + while (UART_GET_GCTL(uart) & UCEN && !(UART_GET_LSR(uart) & TEMT)) + if (time_after(jiffies, timeout)) { + dev_warn(port->dev, "timeout waiting for TX buffer empty\n"); + break; + } + /* Disable UART */ ier = UART_GET_IER(uart); UART_PUT_GCTL(uart, UART_GET_GCTL(uart) & ~UCEN); @@ -1390,7 +1398,7 @@ out_error_free_mem: return ret; } -static int __devexit bfin_serial_remove(struct platform_device *pdev) +static int bfin_serial_remove(struct platform_device *pdev) { struct bfin_serial_port *uart = platform_get_drvdata(pdev); @@ -1410,7 +1418,7 @@ static int __devexit bfin_serial_remove(struct platform_device *pdev) static struct platform_driver bfin_serial_driver = { .probe = bfin_serial_probe, - .remove = __devexit_p(bfin_serial_remove), + .remove = bfin_serial_remove, .suspend = bfin_serial_suspend, .resume = bfin_serial_resume, .driver = { diff --git a/drivers/tty/serial/clps711x.c b/drivers/tty/serial/clps711x.c index d0f719fafc8..3fd2526d121 100644 --- a/drivers/tty/serial/clps711x.c +++ b/drivers/tty/serial/clps711x.c @@ -10,15 +10,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #if defined(CONFIG_SERIAL_CLPS711X_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) @@ -26,172 +17,169 @@ #endif #include <linux/module.h> -#include <linux/ioport.h> -#include <linux/init.h> -#include <linux/console.h> -#include <linux/sysrq.h> -#include <linux/spinlock.h> #include <linux/device.h> -#include <linux/tty.h> -#include <linux/tty_flip.h> +#include <linux/console.h> #include <linux/serial_core.h> #include <linux/serial.h> #include <linux/io.h> +#include <linux/clk.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> +#include <linux/ioport.h> +#include <linux/platform_device.h> #include <mach/hardware.h> -#include <asm/irq.h> - -#define UART_NR 2 - -#define SERIAL_CLPS711X_MAJOR 204 -#define SERIAL_CLPS711X_MINOR 40 -#define SERIAL_CLPS711X_NR UART_NR - -/* - * We use the relevant SYSCON register as a base address for these ports. - */ -#define UBRLCR(port) ((port)->iobase + UBRLCR1 - SYSCON1) -#define UARTDR(port) ((port)->iobase + UARTDR1 - SYSCON1) -#define SYSFLG(port) ((port)->iobase + SYSFLG1 - SYSCON1) -#define SYSCON(port) ((port)->iobase + SYSCON1 - SYSCON1) - -#define TX_IRQ(port) ((port)->irq) -#define RX_IRQ(port) ((port)->irq + 1) -#define UART_ANY_ERR (UARTDR_FRMERR | UARTDR_PARERR | UARTDR_OVERR) - -#define tx_enabled(port) ((port)->unused[0]) +#define UART_CLPS711X_NAME "uart-clps711x" +#define UART_CLPS711X_NR 2 +#define UART_CLPS711X_MAJOR 204 +#define UART_CLPS711X_MINOR 40 + +#define UBRLCR(port) ((port)->line ? UBRLCR2 : UBRLCR1) +#define UARTDR(port) ((port)->line ? UARTDR2 : UARTDR1) +#define SYSFLG(port) ((port)->line ? SYSFLG2 : SYSFLG1) +#define SYSCON(port) ((port)->line ? SYSCON2 : SYSCON1) +#define TX_IRQ(port) ((port)->line ? IRQ_UTXINT2 : IRQ_UTXINT1) +#define RX_IRQ(port) ((port)->line ? IRQ_URXINT2 : IRQ_URXINT1) + +struct clps711x_port { + struct uart_driver uart; + struct clk *uart_clk; + struct uart_port port[UART_CLPS711X_NR]; + int tx_enabled[UART_CLPS711X_NR]; +#ifdef CONFIG_SERIAL_CLPS711X_CONSOLE + struct console console; +#endif +}; -static void clps711xuart_stop_tx(struct uart_port *port) +static void uart_clps711x_stop_tx(struct uart_port *port) { - if (tx_enabled(port)) { + struct clps711x_port *s = dev_get_drvdata(port->dev); + + if (s->tx_enabled[port->line]) { disable_irq(TX_IRQ(port)); - tx_enabled(port) = 0; + s->tx_enabled[port->line] = 0; } } -static void clps711xuart_start_tx(struct uart_port *port) +static void uart_clps711x_start_tx(struct uart_port *port) { - if (!tx_enabled(port)) { + struct clps711x_port *s = dev_get_drvdata(port->dev); + + if (!s->tx_enabled[port->line]) { enable_irq(TX_IRQ(port)); - tx_enabled(port) = 1; + s->tx_enabled[port->line] = 1; } } -static void clps711xuart_stop_rx(struct uart_port *port) +static void uart_clps711x_stop_rx(struct uart_port *port) { disable_irq(RX_IRQ(port)); } -static void clps711xuart_enable_ms(struct uart_port *port) +static void uart_clps711x_enable_ms(struct uart_port *port) { + /* Do nothing */ } -static irqreturn_t clps711xuart_int_rx(int irq, void *dev_id) +static irqreturn_t uart_clps711x_int_rx(int irq, void *dev_id) { struct uart_port *port = dev_id; - struct tty_struct *tty = port->state->port.tty; + struct tty_struct *tty = tty_port_tty_get(&port->state->port); unsigned int status, ch, flg; - status = clps_readl(SYSFLG(port)); - while (!(status & SYSFLG_URXFE)) { - ch = clps_readl(UARTDR(port)); + if (!tty) + return IRQ_HANDLED; - port->icount.rx++; + for (;;) { + status = clps_readl(SYSFLG(port)); + if (status & SYSFLG_URXFE) + break; + + ch = clps_readw(UARTDR(port)); + status = ch & (UARTDR_FRMERR | UARTDR_PARERR | UARTDR_OVERR); + ch &= 0xff; + port->icount.rx++; flg = TTY_NORMAL; - /* - * Note that the error handling code is - * out of the main execution path - */ - if (unlikely(ch & UART_ANY_ERR)) { - if (ch & UARTDR_PARERR) + if (unlikely(status)) { + if (status & UARTDR_PARERR) port->icount.parity++; - else if (ch & UARTDR_FRMERR) + else if (status & UARTDR_FRMERR) port->icount.frame++; - if (ch & UARTDR_OVERR) + else if (status & UARTDR_OVERR) port->icount.overrun++; - ch &= port->read_status_mask; + status &= port->read_status_mask; - if (ch & UARTDR_PARERR) + if (status & UARTDR_PARERR) flg = TTY_PARITY; - else if (ch & UARTDR_FRMERR) + else if (status & UARTDR_FRMERR) flg = TTY_FRAME; - -#ifdef SUPPORT_SYSRQ - port->sysrq = 0; -#endif + else if (status & UARTDR_OVERR) + flg = TTY_OVERRUN; } if (uart_handle_sysrq_char(port, ch)) - goto ignore_char; + continue; - /* - * CHECK: does overrun affect the current character? - * ASSUMPTION: it does not. - */ - uart_insert_char(port, ch, UARTDR_OVERR, ch, flg); + if (status & port->ignore_status_mask) + continue; - ignore_char: - status = clps_readl(SYSFLG(port)); + uart_insert_char(port, status, UARTDR_OVERR, ch, flg); } + tty_flip_buffer_push(tty); + + tty_kref_put(tty); + return IRQ_HANDLED; } -static irqreturn_t clps711xuart_int_tx(int irq, void *dev_id) +static irqreturn_t uart_clps711x_int_tx(int irq, void *dev_id) { struct uart_port *port = dev_id; + struct clps711x_port *s = dev_get_drvdata(port->dev); struct circ_buf *xmit = &port->state->xmit; - int count; if (port->x_char) { - clps_writel(port->x_char, UARTDR(port)); + clps_writew(port->x_char, UARTDR(port)); port->icount.tx++; port->x_char = 0; return IRQ_HANDLED; } - if (uart_circ_empty(xmit) || uart_tx_stopped(port)) - goto disable_tx_irq; + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + disable_irq_nosync(TX_IRQ(port)); + s->tx_enabled[port->line] = 0; + return IRQ_HANDLED; + } - count = port->fifosize >> 1; - do { - clps_writel(xmit->buf[xmit->tail], UARTDR(port)); + while (!uart_circ_empty(xmit)) { + clps_writew(xmit->buf[xmit->tail], UARTDR(port)); xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); port->icount.tx++; - if (uart_circ_empty(xmit)) + if (clps_readl(SYSFLG(port) & SYSFLG_UTXFF)) break; - } while (--count > 0); + } if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(port); - if (uart_circ_empty(xmit)) { - disable_tx_irq: - disable_irq_nosync(TX_IRQ(port)); - tx_enabled(port) = 0; - } - return IRQ_HANDLED; } -static unsigned int clps711xuart_tx_empty(struct uart_port *port) +static unsigned int uart_clps711x_tx_empty(struct uart_port *port) { - unsigned int status = clps_readl(SYSFLG(port)); - return status & SYSFLG_UBUSY ? 0 : TIOCSER_TEMT; + return (clps_readl(SYSFLG(port) & SYSFLG_UBUSY)) ? 0 : TIOCSER_TEMT; } -static unsigned int clps711xuart_get_mctrl(struct uart_port *port) +static unsigned int uart_clps711x_get_mctrl(struct uart_port *port) { - unsigned int port_addr; - unsigned int result = 0; - unsigned int status; + unsigned int status, result = 0; - port_addr = SYSFLG(port); - if (port_addr == SYSFLG1) { + if (port->line == 0) { status = clps_readl(SYSFLG1); if (status & SYSFLG1_DCD) result |= TIOCM_CAR; @@ -199,104 +187,86 @@ static unsigned int clps711xuart_get_mctrl(struct uart_port *port) result |= TIOCM_DSR; if (status & SYSFLG1_CTS) result |= TIOCM_CTS; - } + } else + result = TIOCM_DSR | TIOCM_CTS | TIOCM_CAR; return result; } -static void -clps711xuart_set_mctrl_null(struct uart_port *port, unsigned int mctrl) +static void uart_clps711x_set_mctrl(struct uart_port *port, unsigned int mctrl) { + /* Do nothing */ } -static void clps711xuart_break_ctl(struct uart_port *port, int break_state) +static void uart_clps711x_break_ctl(struct uart_port *port, int break_state) { unsigned long flags; unsigned int ubrlcr; spin_lock_irqsave(&port->lock, flags); + ubrlcr = clps_readl(UBRLCR(port)); - if (break_state == -1) + if (break_state) ubrlcr |= UBRLCR_BREAK; else ubrlcr &= ~UBRLCR_BREAK; clps_writel(ubrlcr, UBRLCR(port)); + spin_unlock_irqrestore(&port->lock, flags); } -static int clps711xuart_startup(struct uart_port *port) +static int uart_clps711x_startup(struct uart_port *port) { - unsigned int syscon; - int retval; - - tx_enabled(port) = 1; - - /* - * Allocate the IRQs - */ - retval = request_irq(TX_IRQ(port), clps711xuart_int_tx, 0, - "clps711xuart_tx", port); - if (retval) - return retval; - - retval = request_irq(RX_IRQ(port), clps711xuart_int_rx, 0, - "clps711xuart_rx", port); - if (retval) { - free_irq(TX_IRQ(port), port); - return retval; + struct clps711x_port *s = dev_get_drvdata(port->dev); + int ret; + + s->tx_enabled[port->line] = 1; + /* Allocate the IRQs */ + ret = devm_request_irq(port->dev, TX_IRQ(port), uart_clps711x_int_tx, + 0, UART_CLPS711X_NAME " TX", port); + if (ret) + return ret; + + ret = devm_request_irq(port->dev, RX_IRQ(port), uart_clps711x_int_rx, + 0, UART_CLPS711X_NAME " RX", port); + if (ret) { + devm_free_irq(port->dev, TX_IRQ(port), port); + return ret; } - /* - * enable the port - */ - syscon = clps_readl(SYSCON(port)); - syscon |= SYSCON_UARTEN; - clps_writel(syscon, SYSCON(port)); + /* Disable break */ + clps_writel(clps_readl(UBRLCR(port)) & ~UBRLCR_BREAK, UBRLCR(port)); + + /* Enable the port */ + clps_writel(clps_readl(SYSCON(port)) | SYSCON_UARTEN, SYSCON(port)); return 0; } -static void clps711xuart_shutdown(struct uart_port *port) +static void uart_clps711x_shutdown(struct uart_port *port) { - unsigned int ubrlcr, syscon; + /* Free the interrupts */ + devm_free_irq(port->dev, TX_IRQ(port), port); + devm_free_irq(port->dev, RX_IRQ(port), port); - /* - * Free the interrupt - */ - free_irq(TX_IRQ(port), port); /* TX interrupt */ - free_irq(RX_IRQ(port), port); /* RX interrupt */ - - /* - * disable the port - */ - syscon = clps_readl(SYSCON(port)); - syscon &= ~SYSCON_UARTEN; - clps_writel(syscon, SYSCON(port)); - - /* - * disable break condition and fifos - */ - ubrlcr = clps_readl(UBRLCR(port)); - ubrlcr &= ~(UBRLCR_FIFOEN | UBRLCR_BREAK); - clps_writel(ubrlcr, UBRLCR(port)); + /* Disable the port */ + clps_writel(clps_readl(SYSCON(port)) & ~SYSCON_UARTEN, SYSCON(port)); } -static void -clps711xuart_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) +static void uart_clps711x_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old) { unsigned int ubrlcr, baud, quot; unsigned long flags; - /* - * We don't implement CREAD. - */ - termios->c_cflag |= CREAD; + /* Mask termios capabilities we don't support */ + termios->c_cflag &= ~CMSPAR; + termios->c_iflag &= ~(BRKINT | IGNBRK); - /* - * Ask the core to calculate the divisor for us. - */ - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); + /* Ask the core to calculate the divisor for us */ + baud = uart_get_baud_rate(port, termios, old, port->uartclk / 4096, + port->uartclk / 16); quot = uart_get_divisor(port, baud); switch (termios->c_cflag & CSIZE) { @@ -309,160 +279,117 @@ clps711xuart_set_termios(struct uart_port *port, struct ktermios *termios, case CS7: ubrlcr = UBRLCR_WRDLEN7; break; - default: // CS8 + case CS8: + default: ubrlcr = UBRLCR_WRDLEN8; break; } + if (termios->c_cflag & CSTOPB) ubrlcr |= UBRLCR_XSTOP; + if (termios->c_cflag & PARENB) { ubrlcr |= UBRLCR_PRTEN; if (!(termios->c_cflag & PARODD)) ubrlcr |= UBRLCR_EVENPRT; } - if (port->fifosize > 1) - ubrlcr |= UBRLCR_FIFOEN; - spin_lock_irqsave(&port->lock, flags); + /* Enable FIFO */ + ubrlcr |= UBRLCR_FIFOEN; - /* - * Update the per-port timeout. - */ - uart_update_timeout(port, termios->c_cflag, baud); + spin_lock_irqsave(&port->lock, flags); + /* Set read status mask */ port->read_status_mask = UARTDR_OVERR; if (termios->c_iflag & INPCK) port->read_status_mask |= UARTDR_PARERR | UARTDR_FRMERR; - /* - * Characters to ignore - */ + /* Set status ignore mask */ port->ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= UARTDR_FRMERR | UARTDR_PARERR; - if (termios->c_iflag & IGNBRK) { - /* - * If we're ignoring parity and break indicators, - * ignore overruns to (for real raw support). - */ - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= UARTDR_OVERR; - } + if (!(termios->c_cflag & CREAD)) + port->ignore_status_mask |= UARTDR_OVERR | UARTDR_PARERR | + UARTDR_FRMERR; - quot -= 1; + uart_update_timeout(port, termios->c_cflag, baud); - clps_writel(ubrlcr | quot, UBRLCR(port)); + clps_writel(ubrlcr | (quot - 1), UBRLCR(port)); spin_unlock_irqrestore(&port->lock, flags); } -static const char *clps711xuart_type(struct uart_port *port) +static const char *uart_clps711x_type(struct uart_port *port) { - return port->type == PORT_CLPS711X ? "CLPS711x" : NULL; + return (port->type == PORT_CLPS711X) ? "CLPS711X" : NULL; } -/* - * Configure/autoconfigure the port. - */ -static void clps711xuart_config_port(struct uart_port *port, int flags) +static void uart_clps711x_config_port(struct uart_port *port, int flags) { if (flags & UART_CONFIG_TYPE) port->type = PORT_CLPS711X; } -static void clps711xuart_release_port(struct uart_port *port) +static void uart_clps711x_release_port(struct uart_port *port) { + /* Do nothing */ } -static int clps711xuart_request_port(struct uart_port *port) +static int uart_clps711x_request_port(struct uart_port *port) { + /* Do nothing */ return 0; } -static struct uart_ops clps711x_pops = { - .tx_empty = clps711xuart_tx_empty, - .set_mctrl = clps711xuart_set_mctrl_null, - .get_mctrl = clps711xuart_get_mctrl, - .stop_tx = clps711xuart_stop_tx, - .start_tx = clps711xuart_start_tx, - .stop_rx = clps711xuart_stop_rx, - .enable_ms = clps711xuart_enable_ms, - .break_ctl = clps711xuart_break_ctl, - .startup = clps711xuart_startup, - .shutdown = clps711xuart_shutdown, - .set_termios = clps711xuart_set_termios, - .type = clps711xuart_type, - .config_port = clps711xuart_config_port, - .release_port = clps711xuart_release_port, - .request_port = clps711xuart_request_port, -}; - -static struct uart_port clps711x_ports[UART_NR] = { - { - .iobase = SYSCON1, - .irq = IRQ_UTXINT1, /* IRQ_URXINT1, IRQ_UMSINT */ - .uartclk = 3686400, - .fifosize = 16, - .ops = &clps711x_pops, - .line = 0, - .flags = UPF_BOOT_AUTOCONF, - }, - { - .iobase = SYSCON2, - .irq = IRQ_UTXINT2, /* IRQ_URXINT2 */ - .uartclk = 3686400, - .fifosize = 16, - .ops = &clps711x_pops, - .line = 1, - .flags = UPF_BOOT_AUTOCONF, - } +static const struct uart_ops uart_clps711x_ops = { + .tx_empty = uart_clps711x_tx_empty, + .set_mctrl = uart_clps711x_set_mctrl, + .get_mctrl = uart_clps711x_get_mctrl, + .stop_tx = uart_clps711x_stop_tx, + .start_tx = uart_clps711x_start_tx, + .stop_rx = uart_clps711x_stop_rx, + .enable_ms = uart_clps711x_enable_ms, + .break_ctl = uart_clps711x_break_ctl, + .startup = uart_clps711x_startup, + .shutdown = uart_clps711x_shutdown, + .set_termios = uart_clps711x_set_termios, + .type = uart_clps711x_type, + .config_port = uart_clps711x_config_port, + .release_port = uart_clps711x_release_port, + .request_port = uart_clps711x_request_port, }; #ifdef CONFIG_SERIAL_CLPS711X_CONSOLE -static void clps711xuart_console_putchar(struct uart_port *port, int ch) +static void uart_clps711x_console_putchar(struct uart_port *port, int ch) { while (clps_readl(SYSFLG(port)) & SYSFLG_UTXFF) barrier(); - clps_writel(ch, UARTDR(port)); + + clps_writew(ch, UARTDR(port)); } -/* - * Print a string to the serial port trying not to disturb - * any possible real use of the port... - * - * The console_lock must be held when we get here. - * - * Note that this is called with interrupts already disabled - */ -static void -clps711xuart_console_write(struct console *co, const char *s, - unsigned int count) +static void uart_clps711x_console_write(struct console *co, const char *c, + unsigned n) { - struct uart_port *port = clps711x_ports + co->index; - unsigned int status, syscon; + struct clps711x_port *s = (struct clps711x_port *)co->data; + struct uart_port *port = &s->port[co->index]; + u32 syscon; - /* - * Ensure that the port is enabled. - */ + /* Ensure that the port is enabled */ syscon = clps_readl(SYSCON(port)); clps_writel(syscon | SYSCON_UARTEN, SYSCON(port)); - uart_console_write(port, s, count, clps711xuart_console_putchar); + uart_console_write(port, c, n, uart_clps711x_console_putchar); - /* - * Finally, wait for transmitter to become empty - * and restore the uart state. - */ - do { - status = clps_readl(SYSFLG(port)); - } while (status & SYSFLG_UBUSY); + /* Wait for transmitter to become empty */ + while (clps_readl(SYSFLG(port)) & SYSFLG_UBUSY) + barrier(); + /* Restore the uart state */ clps_writel(syscon, SYSCON(port)); } -static void __init -clps711xuart_console_get_options(struct uart_port *port, int *baud, - int *parity, int *bits) +static void uart_clps711x_console_get_options(struct uart_port *port, + int *baud, int *parity, + int *bits) { if (clps_readl(SYSCON(port)) & SYSCON_UARTEN) { unsigned int ubrlcr, quot; @@ -487,92 +414,124 @@ clps711xuart_console_get_options(struct uart_port *port, int *baud, } } -static int __init clps711xuart_console_setup(struct console *co, char *options) +static int uart_clps711x_console_setup(struct console *co, char *options) { - struct uart_port *port; - int baud = 38400; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - /* - * Check whether an invalid uart number has been specified, and - * if so, search for the first available port that does have - * console support. - */ - port = uart_get_console(clps711x_ports, UART_NR, co); + int baud = 38400, bits = 8, parity = 'n', flow = 'n'; + struct clps711x_port *s = (struct clps711x_port *)co->data; + struct uart_port *port = &s->port[(co->index > 0) ? co->index : 0]; if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); else - clps711xuart_console_get_options(port, &baud, &parity, &bits); + uart_clps711x_console_get_options(port, &baud, &parity, &bits); return uart_set_options(port, co, baud, parity, bits, flow); } +#endif -static struct uart_driver clps711x_reg; -static struct console clps711x_console = { - .name = "ttyCL", - .write = clps711xuart_console_write, - .device = uart_console_device, - .setup = clps711xuart_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &clps711x_reg, -}; - -static int __init clps711xuart_console_init(void) +static int uart_clps711x_probe(struct platform_device *pdev) { - register_console(&clps711x_console); - return 0; -} -console_initcall(clps711xuart_console_init); + struct clps711x_port *s; + int ret, i; + + s = devm_kzalloc(&pdev->dev, sizeof(struct clps711x_port), GFP_KERNEL); + if (!s) { + dev_err(&pdev->dev, "Error allocating port structure\n"); + return -ENOMEM; + } + platform_set_drvdata(pdev, s); -#define CLPS711X_CONSOLE &clps711x_console -#else -#define CLPS711X_CONSOLE NULL + s->uart_clk = devm_clk_get(&pdev->dev, "uart"); + if (IS_ERR(s->uart_clk)) { + dev_err(&pdev->dev, "Can't get UART clocks\n"); + ret = PTR_ERR(s->uart_clk); + goto err_out; + } + + s->uart.owner = THIS_MODULE; + s->uart.dev_name = "ttyCL"; + s->uart.major = UART_CLPS711X_MAJOR; + s->uart.minor = UART_CLPS711X_MINOR; + s->uart.nr = UART_CLPS711X_NR; +#ifdef CONFIG_SERIAL_CLPS711X_CONSOLE + s->uart.cons = &s->console; + s->uart.cons->device = uart_console_device; + s->uart.cons->write = uart_clps711x_console_write; + s->uart.cons->setup = uart_clps711x_console_setup; + s->uart.cons->flags = CON_PRINTBUFFER; + s->uart.cons->index = -1; + s->uart.cons->data = s; + strcpy(s->uart.cons->name, "ttyCL"); #endif + ret = uart_register_driver(&s->uart); + if (ret) { + dev_err(&pdev->dev, "Registering UART driver failed\n"); + devm_clk_put(&pdev->dev, s->uart_clk); + goto err_out; + } -static struct uart_driver clps711x_reg = { - .driver_name = "ttyCL", - .dev_name = "ttyCL", - .major = SERIAL_CLPS711X_MAJOR, - .minor = SERIAL_CLPS711X_MINOR, - .nr = UART_NR, + for (i = 0; i < UART_CLPS711X_NR; i++) { + s->port[i].line = i; + s->port[i].dev = &pdev->dev; + s->port[i].irq = TX_IRQ(&s->port[i]); + s->port[i].iobase = SYSCON(&s->port[i]); + s->port[i].type = PORT_CLPS711X; + s->port[i].fifosize = 16; + s->port[i].flags = UPF_SKIP_TEST | UPF_FIXED_TYPE; + s->port[i].uartclk = clk_get_rate(s->uart_clk); + s->port[i].ops = &uart_clps711x_ops; + WARN_ON(uart_add_one_port(&s->uart, &s->port[i])); + } - .cons = CLPS711X_CONSOLE, -}; + return 0; -static int __init clps711xuart_init(void) -{ - int ret, i; +err_out: + platform_set_drvdata(pdev, NULL); - printk(KERN_INFO "Serial: CLPS711x driver\n"); + return ret; +} - ret = uart_register_driver(&clps711x_reg); - if (ret) - return ret; +static int uart_clps711x_remove(struct platform_device *pdev) +{ + struct clps711x_port *s = platform_get_drvdata(pdev); + int i; - for (i = 0; i < UART_NR; i++) - uart_add_one_port(&clps711x_reg, &clps711x_ports[i]); + for (i = 0; i < UART_CLPS711X_NR; i++) + uart_remove_one_port(&s->uart, &s->port[i]); + + devm_clk_put(&pdev->dev, s->uart_clk); + uart_unregister_driver(&s->uart); + platform_set_drvdata(pdev, NULL); return 0; } -static void __exit clps711xuart_exit(void) -{ - int i; +static struct platform_driver clps711x_uart_driver = { + .driver = { + .name = UART_CLPS711X_NAME, + .owner = THIS_MODULE, + }, + .probe = uart_clps711x_probe, + .remove = uart_clps711x_remove, +}; +module_platform_driver(clps711x_uart_driver); - for (i = 0; i < UART_NR; i++) - uart_remove_one_port(&clps711x_reg, &clps711x_ports[i]); +static struct platform_device clps711x_uart_device = { + .name = UART_CLPS711X_NAME, +}; - uart_unregister_driver(&clps711x_reg); +static int __init uart_clps711x_init(void) +{ + return platform_device_register(&clps711x_uart_device); } +module_init(uart_clps711x_init); -module_init(clps711xuart_init); -module_exit(clps711xuart_exit); +static void __exit uart_clps711x_exit(void) +{ + platform_device_unregister(&clps711x_uart_device); +} +module_exit(uart_clps711x_exit); MODULE_AUTHOR("Deep Blue Solutions Ltd"); -MODULE_DESCRIPTION("CLPS-711x generic serial driver"); +MODULE_DESCRIPTION("CLPS711X serial driver"); MODULE_LICENSE("GPL"); -MODULE_ALIAS_CHARDEV(SERIAL_CLPS711X_MAJOR, SERIAL_CLPS711X_MINOR); diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c index d0dd9194cec..ad0caf17680 100644 --- a/drivers/tty/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c @@ -1373,7 +1373,7 @@ static struct uart_driver cpm_reg = { static int probe_index; -static int __devinit cpm_uart_probe(struct platform_device *ofdev) +static int cpm_uart_probe(struct platform_device *ofdev) { int index = probe_index++; struct uart_cpm_port *pinfo = &cpm_uart_ports[index]; @@ -1396,7 +1396,7 @@ static int __devinit cpm_uart_probe(struct platform_device *ofdev) return uart_add_one_port(&cpm_reg, &pinfo->port); } -static int __devexit cpm_uart_remove(struct platform_device *ofdev) +static int cpm_uart_remove(struct platform_device *ofdev) { struct uart_cpm_port *pinfo = dev_get_drvdata(&ofdev->dev); return uart_remove_one_port(&cpm_reg, &pinfo->port); diff --git a/drivers/tty/serial/efm32-uart.c b/drivers/tty/serial/efm32-uart.c index 615e4647049..a8cbb267052 100644 --- a/drivers/tty/serial/efm32-uart.c +++ b/drivers/tty/serial/efm32-uart.c @@ -690,7 +690,7 @@ static int efm32_uart_probe_dt(struct platform_device *pdev, } -static int __devinit efm32_uart_probe(struct platform_device *pdev) +static int efm32_uart_probe(struct platform_device *pdev) { struct efm32_uart_port *efm_port; struct resource *res; @@ -764,7 +764,7 @@ err_get_base: return ret; } -static int __devexit efm32_uart_remove(struct platform_device *pdev) +static int efm32_uart_remove(struct platform_device *pdev) { struct efm32_uart_port *efm_port = platform_get_drvdata(pdev); @@ -791,7 +791,7 @@ MODULE_DEVICE_TABLE(of, efm32_uart_dt_ids); static struct platform_driver efm32_uart_driver = { .probe = efm32_uart_probe, - .remove = __devexit_p(efm32_uart_remove), + .remove = efm32_uart_remove, .driver = { .name = DRIVER_NAME, diff --git a/drivers/tty/serial/icom.c b/drivers/tty/serial/icom.c index defc4e3393a..6197a69adb4 100644 --- a/drivers/tty/serial/icom.c +++ b/drivers/tty/serial/icom.c @@ -175,7 +175,7 @@ static void free_port_memory(struct icom_port *icom_port) } } -static int __devinit get_port_memory(struct icom_port *icom_port) +static int get_port_memory(struct icom_port *icom_port) { int index; unsigned long stgAddr; @@ -1314,7 +1314,7 @@ static struct uart_driver icom_uart_driver = { .cons = ICOM_CONSOLE, }; -static int __devinit icom_init_ports(struct icom_adapter *icom_adapter) +static int icom_init_ports(struct icom_adapter *icom_adapter) { u32 subsystem_id = icom_adapter->subsystem_id; int i; @@ -1381,7 +1381,7 @@ static void icom_port_active(struct icom_port *icom_port, struct icom_adapter *i 0x8024 + 2 - 2 * (icom_port->port - 2); } } -static int __devinit icom_load_ports(struct icom_adapter *icom_adapter) +static int icom_load_ports(struct icom_adapter *icom_adapter) { struct icom_port *icom_port; int port_num; @@ -1407,7 +1407,7 @@ static int __devinit icom_load_ports(struct icom_adapter *icom_adapter) return 0; } -static int __devinit icom_alloc_adapter(struct icom_adapter +static int icom_alloc_adapter(struct icom_adapter **icom_adapter_ref) { int adapter_count = 0; @@ -1487,7 +1487,7 @@ static void icom_kref_release(struct kref *kref) icom_remove_adapter(icom_adapter); } -static int __devinit icom_probe(struct pci_dev *dev, +static int icom_probe(struct pci_dev *dev, const struct pci_device_id *ent) { int index; @@ -1596,7 +1596,7 @@ probe_exit0: return retval; } -static void __devexit icom_remove(struct pci_dev *dev) +static void icom_remove(struct pci_dev *dev) { struct icom_adapter *icom_adapter; struct list_head *tmp; @@ -1617,7 +1617,7 @@ static struct pci_driver icom_pci_driver = { .name = ICOM_DRIVER_NAME, .id_table = icom_pci_table, .probe = icom_probe, - .remove = __devexit_p(icom_remove), + .remove = icom_remove, }; static int __init icom_init(void) diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c index 5b9bc19ed13..675d94ab0af 100644 --- a/drivers/tty/serial/ifx6x60.c +++ b/drivers/tty/serial/ifx6x60.c @@ -60,20 +60,27 @@ #include <linux/pm_runtime.h> #include <linux/spi/ifx_modem.h> #include <linux/delay.h> +#include <linux/reboot.h> #include "ifx6x60.h" #define IFX_SPI_MORE_MASK 0x10 -#define IFX_SPI_MORE_BIT 12 /* bit position in u16 */ -#define IFX_SPI_CTS_BIT 13 /* bit position in u16 */ +#define IFX_SPI_MORE_BIT 4 /* bit position in u8 */ +#define IFX_SPI_CTS_BIT 6 /* bit position in u8 */ #define IFX_SPI_MODE SPI_MODE_1 #define IFX_SPI_TTY_ID 0 #define IFX_SPI_TIMEOUT_SEC 2 #define IFX_SPI_HEADER_0 (-1) #define IFX_SPI_HEADER_F (-2) +#define PO_POST_DELAY 200 +#define IFX_MDM_RST_PMU 4 + /* forward reference */ static void ifx_spi_handle_srdy(struct ifx_spi_device *ifx_dev); +static int ifx_modem_reboot_callback(struct notifier_block *nfb, + unsigned long event, void *data); +static int ifx_modem_power_off(struct ifx_spi_device *ifx_dev); /* local variables */ static int spi_bpw = 16; /* 8, 16 or 32 bit word length */ @@ -81,6 +88,29 @@ static struct tty_driver *tty_drv; static struct ifx_spi_device *saved_ifx_dev; static struct lock_class_key ifx_spi_key; +static struct notifier_block ifx_modem_reboot_notifier_block = { + .notifier_call = ifx_modem_reboot_callback, +}; + +static int ifx_modem_power_off(struct ifx_spi_device *ifx_dev) +{ + gpio_set_value(IFX_MDM_RST_PMU, 1); + msleep(PO_POST_DELAY); + + return 0; +} + +static int ifx_modem_reboot_callback(struct notifier_block *nfb, + unsigned long event, void *data) +{ + if (saved_ifx_dev) + ifx_modem_power_off(saved_ifx_dev); + else + pr_warn("no ifx modem active;\n"); + + return NOTIFY_OK; +} + /* GPIO/GPE settings */ /** @@ -152,26 +182,67 @@ ifx_spi_power_state_clear(struct ifx_spi_device *ifx_dev, unsigned char val) } /** - * swap_buf + * swap_buf_8 * @buf: our buffer * @len : number of bytes (not words) in the buffer * @end: end of buffer * * Swap the contents of a buffer into big endian format */ -static inline void swap_buf(u16 *buf, int len, void *end) +static inline void swap_buf_8(unsigned char *buf, int len, void *end) +{ + /* don't swap buffer if SPI word width is 8 bits */ + return; +} + +/** + * swap_buf_16 + * @buf: our buffer + * @len : number of bytes (not words) in the buffer + * @end: end of buffer + * + * Swap the contents of a buffer into big endian format + */ +static inline void swap_buf_16(unsigned char *buf, int len, void *end) { int n; + u16 *buf_16 = (u16 *)buf; len = ((len + 1) >> 1); - if ((void *)&buf[len] > end) { - pr_err("swap_buf: swap exceeds boundary (%p > %p)!", - &buf[len], end); + if ((void *)&buf_16[len] > end) { + pr_err("swap_buf_16: swap exceeds boundary (%p > %p)!", + &buf_16[len], end); + return; + } + for (n = 0; n < len; n++) { + *buf_16 = cpu_to_be16(*buf_16); + buf_16++; + } +} + +/** + * swap_buf_32 + * @buf: our buffer + * @len : number of bytes (not words) in the buffer + * @end: end of buffer + * + * Swap the contents of a buffer into big endian format + */ +static inline void swap_buf_32(unsigned char *buf, int len, void *end) +{ + int n; + + u32 *buf_32 = (u32 *)buf; + len = (len + 3) >> 2; + + if ((void *)&buf_32[len] > end) { + pr_err("swap_buf_32: swap exceeds boundary (%p > %p)!\n", + &buf_32[len], end); return; } for (n = 0; n < len; n++) { - *buf = cpu_to_be16(*buf); - buf++; + *buf_32 = cpu_to_be32(*buf_32); + buf_32++; } } @@ -190,9 +261,7 @@ static void mrdy_assert(struct ifx_spi_device *ifx_dev) if (!val) { if (!test_and_set_bit(IFX_SPI_STATE_TIMER_PENDING, &ifx_dev->flags)) { - ifx_dev->spi_timer.expires = - jiffies + IFX_SPI_TIMEOUT_SEC*HZ; - add_timer(&ifx_dev->spi_timer); + mod_timer(&ifx_dev->spi_timer,jiffies + IFX_SPI_TIMEOUT_SEC*HZ); } } @@ -449,7 +518,7 @@ static int ifx_spi_prepare_tx_buffer(struct ifx_spi_device *ifx_dev) tx_count-IFX_SPI_HEADER_OVERHEAD, ifx_dev->spi_more); /* swap actual data in the buffer */ - swap_buf((u16 *)(ifx_dev->tx_buffer), tx_count, + ifx_dev->swap_buf((ifx_dev->tx_buffer), tx_count, &ifx_dev->tx_buffer[IFX_SPI_TRANSFER_SIZE]); return tx_count; } @@ -469,9 +538,17 @@ static int ifx_spi_write(struct tty_struct *tty, const unsigned char *buf, { struct ifx_spi_device *ifx_dev = tty->driver_data; unsigned char *tmp_buf = (unsigned char *)buf; - int tx_count = kfifo_in_locked(&ifx_dev->tx_fifo, tmp_buf, count, - &ifx_dev->fifo_lock); - mrdy_assert(ifx_dev); + unsigned long flags; + bool is_fifo_empty; + int tx_count; + + spin_lock_irqsave(&ifx_dev->fifo_lock, flags); + is_fifo_empty = kfifo_is_empty(&ifx_dev->tx_fifo); + tx_count = kfifo_in(&ifx_dev->tx_fifo, tmp_buf, count); + spin_unlock_irqrestore(&ifx_dev->fifo_lock, flags); + if (is_fifo_empty) + mrdy_assert(ifx_dev); + return tx_count; } @@ -530,12 +607,19 @@ static int ifx_port_activate(struct tty_port *port, struct tty_struct *tty) /* clear any old data; can't do this in 'close' */ kfifo_reset(&ifx_dev->tx_fifo); + /* clear any flag which may be set in port shutdown procedure */ + clear_bit(IFX_SPI_STATE_IO_IN_PROGRESS, &ifx_dev->flags); + clear_bit(IFX_SPI_STATE_IO_READY, &ifx_dev->flags); + /* put port data into this tty */ tty->driver_data = ifx_dev; /* allows flip string push from int context */ tty->low_latency = 1; + /* set flag to allows data transfer */ + set_bit(IFX_SPI_STATE_IO_AVAILABLE, &ifx_dev->flags); + return 0; } @@ -551,6 +635,7 @@ static void ifx_port_shutdown(struct tty_port *port) struct ifx_spi_device *ifx_dev = container_of(port, struct ifx_spi_device, tty_port); + clear_bit(IFX_SPI_STATE_IO_AVAILABLE, &ifx_dev->flags); mrdy_set_low(ifx_dev); clear_bit(IFX_SPI_STATE_TIMER_PENDING, &ifx_dev->flags); tasklet_kill(&ifx_dev->io_work_tasklet); @@ -617,7 +702,7 @@ static void ifx_spi_complete(void *ctx) if (!ifx_dev->spi_msg.status) { /* check header validity, get comm flags */ - swap_buf((u16 *)ifx_dev->rx_buffer, IFX_SPI_HEADER_OVERHEAD, + ifx_dev->swap_buf(ifx_dev->rx_buffer, IFX_SPI_HEADER_OVERHEAD, &ifx_dev->rx_buffer[IFX_SPI_HEADER_OVERHEAD]); decode_result = ifx_spi_decode_spi_header(ifx_dev->rx_buffer, &length, &more, &cts); @@ -636,7 +721,8 @@ static void ifx_spi_complete(void *ctx) actual_length = min((unsigned int)length, ifx_dev->spi_msg.actual_length); - swap_buf((u16 *)(ifx_dev->rx_buffer + IFX_SPI_HEADER_OVERHEAD), + ifx_dev->swap_buf( + (ifx_dev->rx_buffer + IFX_SPI_HEADER_OVERHEAD), actual_length, &ifx_dev->rx_buffer[IFX_SPI_TRANSFER_SIZE]); ifx_spi_insert_flip_string( @@ -705,7 +791,8 @@ static void ifx_spi_io(unsigned long data) int retval; struct ifx_spi_device *ifx_dev = (struct ifx_spi_device *) data; - if (!test_and_set_bit(IFX_SPI_STATE_IO_IN_PROGRESS, &ifx_dev->flags)) { + if (!test_and_set_bit(IFX_SPI_STATE_IO_IN_PROGRESS, &ifx_dev->flags) && + test_bit(IFX_SPI_STATE_IO_AVAILABLE, &ifx_dev->flags)) { if (ifx_dev->gpio.unack_srdy_int_nb > 0) ifx_dev->gpio.unack_srdy_int_nb--; @@ -773,6 +860,7 @@ static void ifx_spi_free_port(struct ifx_spi_device *ifx_dev) { if (ifx_dev->tty_dev) tty_unregister_device(tty_drv, ifx_dev->minor); + tty_port_destroy(&ifx_dev->tty_port); kfifo_free(&ifx_dev->tx_fifo); } @@ -806,10 +894,12 @@ static int ifx_spi_create_port(struct ifx_spi_device *ifx_dev) dev_dbg(&ifx_dev->spi_dev->dev, "%s: registering tty device failed", __func__); ret = PTR_ERR(ifx_dev->tty_dev); - goto error_ret; + goto error_port; } return 0; +error_port: + tty_port_destroy(pport); error_ret: ifx_spi_free_port(ifx_dev); return ret; @@ -826,7 +916,7 @@ error_ret: static void ifx_spi_handle_srdy(struct ifx_spi_device *ifx_dev) { if (test_bit(IFX_SPI_STATE_TIMER_PENDING, &ifx_dev->flags)) { - del_timer_sync(&ifx_dev->spi_timer); + del_timer(&ifx_dev->spi_timer); clear_bit(IFX_SPI_STATE_TIMER_PENDING, &ifx_dev->flags); } @@ -1001,6 +1091,14 @@ static int ifx_spi_spi_probe(struct spi_device *spi) return -ENODEV; } + /* init swap_buf function according to word width configuration */ + if (spi->bits_per_word == 32) + ifx_dev->swap_buf = swap_buf_32; + else if (spi->bits_per_word == 16) + ifx_dev->swap_buf = swap_buf_16; + else + ifx_dev->swap_buf = swap_buf_8; + /* ensure SPI protocol flags are initialized to enable transfer */ ifx_dev->spi_more = 0; ifx_dev->spi_slave_cts = 0; @@ -1219,6 +1317,9 @@ static int ifx_spi_spi_remove(struct spi_device *spi) static void ifx_spi_spi_shutdown(struct spi_device *spi) { + struct ifx_spi_device *ifx_dev = spi_get_drvdata(spi); + + ifx_modem_power_off(ifx_dev); } /* @@ -1338,7 +1439,7 @@ static struct spi_driver ifx_spi_driver = { .owner = THIS_MODULE}, .probe = ifx_spi_spi_probe, .shutdown = ifx_spi_spi_shutdown, - .remove = __devexit_p(ifx_spi_spi_remove), + .remove = ifx_spi_spi_remove, .suspend = ifx_spi_spi_suspend, .resume = ifx_spi_spi_resume, .id_table = ifx_id_table @@ -1354,7 +1455,9 @@ static void __exit ifx_spi_exit(void) { /* unregister */ tty_unregister_driver(tty_drv); + put_tty_driver(tty_drv); spi_unregister_driver((void *)&ifx_spi_driver); + unregister_reboot_notifier(&ifx_modem_reboot_notifier_block); } /** @@ -1389,16 +1492,31 @@ static int __init ifx_spi_init(void) if (result) { pr_err("%s: tty_register_driver failed(%d)", DRVNAME, result); - put_tty_driver(tty_drv); - return result; + goto err_free_tty; } result = spi_register_driver((void *)&ifx_spi_driver); if (result) { pr_err("%s: spi_register_driver failed(%d)", DRVNAME, result); - tty_unregister_driver(tty_drv); + goto err_unreg_tty; } + + result = register_reboot_notifier(&ifx_modem_reboot_notifier_block); + if (result) { + pr_err("%s: register ifx modem reboot notifier failed(%d)", + DRVNAME, result); + goto err_unreg_spi; + } + + return 0; +err_unreg_spi: + spi_unregister_driver((void *)&ifx_spi_driver); +err_unreg_tty: + tty_unregister_driver(tty_drv); +err_free_tty: + put_tty_driver(tty_drv); + return result; } diff --git a/drivers/tty/serial/ifx6x60.h b/drivers/tty/serial/ifx6x60.h index e8464baf9e7..4fbddc29783 100644 --- a/drivers/tty/serial/ifx6x60.h +++ b/drivers/tty/serial/ifx6x60.h @@ -41,6 +41,7 @@ #define IFX_SPI_STATE_IO_IN_PROGRESS 1 #define IFX_SPI_STATE_IO_READY 2 #define IFX_SPI_STATE_TIMER_PENDING 3 +#define IFX_SPI_STATE_IO_AVAILABLE 4 /* flow control bitfields */ #define IFX_SPI_DCD 0 @@ -124,6 +125,7 @@ struct ifx_spi_device { #define MR_INPROGRESS 1 #define MR_COMPLETE 2 wait_queue_head_t mdm_reset_wait; + void (*swap_buf)(unsigned char *buf, int len, void *end); }; #endif /* _IFX6X60_H */ diff --git a/drivers/tty/serial/ioc3_serial.c b/drivers/tty/serial/ioc3_serial.c index 5ac52898a0b..d8f1d1d5447 100644 --- a/drivers/tty/serial/ioc3_serial.c +++ b/drivers/tty/serial/ioc3_serial.c @@ -2010,7 +2010,7 @@ static int ioc3uart_remove(struct ioc3_submodule *is, * @idd: ioc3 driver data for this card */ -static int __devinit +static int ioc3uart_probe(struct ioc3_submodule *is, struct ioc3_driver_data *idd) { struct pci_dev *pdev = idd->pdev; diff --git a/drivers/tty/serial/jsm/jsm.h b/drivers/tty/serial/jsm/jsm.h index 529bec6edaf..844d5e4eb1a 100644 --- a/drivers/tty/serial/jsm/jsm.h +++ b/drivers/tty/serial/jsm/jsm.h @@ -57,9 +57,11 @@ enum { DBG_CARR = 0x10000, }; -#define jsm_printk(nlevel, klevel, pdev, fmt, args...) \ - if ((DBG_##nlevel & jsm_debug)) \ - dev_printk(KERN_##klevel, pdev->dev, fmt, ## args) +#define jsm_dbg(nlevel, pdev, fmt, ...) \ +do { \ + if (DBG_##nlevel & jsm_debug) \ + dev_dbg(pdev->dev, fmt, ##__VA_ARGS__); \ +} while (0) #define MAXLINES 256 #define MAXPORTS 8 diff --git a/drivers/tty/serial/jsm/jsm_driver.c b/drivers/tty/serial/jsm/jsm_driver.c index 5ab3c3b595e..a47d882d674 100644 --- a/drivers/tty/serial/jsm/jsm_driver.c +++ b/drivers/tty/serial/jsm/jsm_driver.c @@ -64,7 +64,7 @@ int jsm_debug; module_param(jsm_debug, int, 0); MODULE_PARM_DESC(jsm_debug, "Driver debugging level"); -static int __devinit jsm_probe_one(struct pci_dev *pdev, const struct pci_device_id *ent) +static int jsm_probe_one(struct pci_dev *pdev, const struct pci_device_id *ent) { int rc = 0; struct jsm_board *brd; @@ -107,8 +107,7 @@ static int __devinit jsm_probe_one(struct pci_dev *pdev, const struct pci_device brd->irq = pdev->irq; - jsm_printk(INIT, INFO, &brd->pci_dev, - "jsm_found_board - NEO adapter\n"); + jsm_dbg(INIT, &brd->pci_dev, "jsm_found_board - NEO adapter\n"); /* get the PCI Base Address Registers */ brd->membase = pci_resource_start(pdev, 0); @@ -179,7 +178,7 @@ static int __devinit jsm_probe_one(struct pci_dev *pdev, const struct pci_device return rc; } -static void __devexit jsm_remove_one(struct pci_dev *pdev) +static void jsm_remove_one(struct pci_dev *pdev) { struct jsm_board *brd = pci_get_drvdata(pdev); int i = 0; @@ -218,7 +217,7 @@ static struct pci_driver jsm_driver = { .name = "jsm", .id_table = jsm_pci_tbl, .probe = jsm_probe_one, - .remove = __devexit_p(jsm_remove_one), + .remove = jsm_remove_one, .err_handler = &jsm_err_handler, }; diff --git a/drivers/tty/serial/jsm/jsm_neo.c b/drivers/tty/serial/jsm/jsm_neo.c index 81dfafa11b0..dfaf4882641 100644 --- a/drivers/tty/serial/jsm/jsm_neo.c +++ b/drivers/tty/serial/jsm/jsm_neo.c @@ -52,7 +52,7 @@ static void neo_set_cts_flow_control(struct jsm_channel *ch) ier = readb(&ch->ch_neo_uart->ier); efr = readb(&ch->ch_neo_uart->efr); - jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Setting CTSFLOW\n"); + jsm_dbg(PARAM, &ch->ch_bd->pci_dev, "Setting CTSFLOW\n"); /* Turn on auto CTS flow control */ ier |= (UART_17158_IER_CTSDSR); @@ -83,7 +83,7 @@ static void neo_set_rts_flow_control(struct jsm_channel *ch) ier = readb(&ch->ch_neo_uart->ier); efr = readb(&ch->ch_neo_uart->efr); - jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Setting RTSFLOW\n"); + jsm_dbg(PARAM, &ch->ch_bd->pci_dev, "Setting RTSFLOW\n"); /* Turn on auto RTS flow control */ ier |= (UART_17158_IER_RTSDTR); @@ -123,7 +123,7 @@ static void neo_set_ixon_flow_control(struct jsm_channel *ch) ier = readb(&ch->ch_neo_uart->ier); efr = readb(&ch->ch_neo_uart->efr); - jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Setting IXON FLOW\n"); + jsm_dbg(PARAM, &ch->ch_bd->pci_dev, "Setting IXON FLOW\n"); /* Turn off auto CTS flow control */ ier &= ~(UART_17158_IER_CTSDSR); @@ -160,7 +160,7 @@ static void neo_set_ixoff_flow_control(struct jsm_channel *ch) ier = readb(&ch->ch_neo_uart->ier); efr = readb(&ch->ch_neo_uart->efr); - jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Setting IXOFF FLOW\n"); + jsm_dbg(PARAM, &ch->ch_bd->pci_dev, "Setting IXOFF FLOW\n"); /* Turn off auto RTS flow control */ ier &= ~(UART_17158_IER_RTSDTR); @@ -198,7 +198,7 @@ static void neo_set_no_input_flow_control(struct jsm_channel *ch) ier = readb(&ch->ch_neo_uart->ier); efr = readb(&ch->ch_neo_uart->efr); - jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Unsetting Input FLOW\n"); + jsm_dbg(PARAM, &ch->ch_bd->pci_dev, "Unsetting Input FLOW\n"); /* Turn off auto RTS flow control */ ier &= ~(UART_17158_IER_RTSDTR); @@ -237,7 +237,7 @@ static void neo_set_no_output_flow_control(struct jsm_channel *ch) ier = readb(&ch->ch_neo_uart->ier); efr = readb(&ch->ch_neo_uart->efr); - jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Unsetting Output FLOW\n"); + jsm_dbg(PARAM, &ch->ch_bd->pci_dev, "Unsetting Output FLOW\n"); /* Turn off auto CTS flow control */ ier &= ~(UART_17158_IER_CTSDSR); @@ -276,7 +276,7 @@ static inline void neo_set_new_start_stop_chars(struct jsm_channel *ch) if (ch->ch_c_cflag & CRTSCTS) return; - jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "start\n"); + jsm_dbg(PARAM, &ch->ch_bd->pci_dev, "start\n"); /* Tell UART what start/stop chars it should be looking for */ writeb(ch->ch_startc, &ch->ch_neo_uart->xonchar1); @@ -455,7 +455,7 @@ static void neo_copy_data_from_uart_to_queue(struct jsm_channel *ch) * I hope thats okay with everyone? Yes? Good. */ while (qleft < 1) { - jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, + jsm_dbg(READ, &ch->ch_bd->pci_dev, "Queue full, dropping DATA:%x LSR:%x\n", ch->ch_rqueue[tail], ch->ch_equeue[tail]); @@ -467,8 +467,8 @@ static void neo_copy_data_from_uart_to_queue(struct jsm_channel *ch) memcpy_fromio(ch->ch_rqueue + head, &ch->ch_neo_uart->txrxburst, 1); ch->ch_equeue[head] = (u8) linestatus; - jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, - "DATA/LSR pair: %x %x\n", ch->ch_rqueue[head], ch->ch_equeue[head]); + jsm_dbg(READ, &ch->ch_bd->pci_dev, "DATA/LSR pair: %x %x\n", + ch->ch_rqueue[head], ch->ch_equeue[head]); /* Ditch any remaining linestatus value. */ linestatus = 0; @@ -521,8 +521,8 @@ static void neo_copy_data_from_queue_to_uart(struct jsm_channel *ch) ch->ch_cached_lsr &= ~(UART_LSR_THRE); writeb(circ->buf[circ->tail], &ch->ch_neo_uart->txrx); - jsm_printk(WRITE, INFO, &ch->ch_bd->pci_dev, - "Tx data: %x\n", circ->buf[circ->tail]); + jsm_dbg(WRITE, &ch->ch_bd->pci_dev, + "Tx data: %x\n", circ->buf[circ->tail]); circ->tail = (circ->tail + 1) & (UART_XMIT_SIZE - 1); ch->ch_txcount++; } @@ -575,8 +575,9 @@ static void neo_parse_modem(struct jsm_channel *ch, u8 signals) { u8 msignals = signals; - jsm_printk(MSIGS, INFO, &ch->ch_bd->pci_dev, - "neo_parse_modem: port: %d msignals: %x\n", ch->ch_portnum, msignals); + jsm_dbg(MSIGS, &ch->ch_bd->pci_dev, + "neo_parse_modem: port: %d msignals: %x\n", + ch->ch_portnum, msignals); /* Scrub off lower bits. They signify delta's, which I don't care about */ /* Keep DDCD and DDSR though */ @@ -606,8 +607,8 @@ static void neo_parse_modem(struct jsm_channel *ch, u8 signals) else ch->ch_mistat &= ~UART_MSR_CTS; - jsm_printk(MSIGS, INFO, &ch->ch_bd->pci_dev, - "Port: %d DTR: %d RTS: %d CTS: %d DSR: %d " "RI: %d CD: %d\n", + jsm_dbg(MSIGS, &ch->ch_bd->pci_dev, + "Port: %d DTR: %d RTS: %d CTS: %d DSR: %d " "RI: %d CD: %d\n", ch->ch_portnum, !!((ch->ch_mistat | ch->ch_mostat) & UART_MCR_DTR), !!((ch->ch_mistat | ch->ch_mostat) & UART_MCR_RTS), @@ -649,8 +650,8 @@ static void neo_flush_uart_write(struct jsm_channel *ch) /* Check to see if the UART feels it completely flushed the FIFO. */ tmp = readb(&ch->ch_neo_uart->isr_fcr); if (tmp & 4) { - jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev, - "Still flushing TX UART... i: %d\n", i); + jsm_dbg(IOCTL, &ch->ch_bd->pci_dev, + "Still flushing TX UART... i: %d\n", i); udelay(10); } else @@ -681,8 +682,8 @@ static void neo_flush_uart_read(struct jsm_channel *ch) /* Check to see if the UART feels it completely flushed the FIFO. */ tmp = readb(&ch->ch_neo_uart->isr_fcr); if (tmp & 2) { - jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev, - "Still flushing RX UART... i: %d\n", i); + jsm_dbg(IOCTL, &ch->ch_bd->pci_dev, + "Still flushing RX UART... i: %d\n", i); udelay(10); } else @@ -705,8 +706,9 @@ static void neo_clear_break(struct jsm_channel *ch, int force) writeb((temp & ~UART_LCR_SBC), &ch->ch_neo_uart->lcr); ch->ch_flags &= ~(CH_BREAK_SENDING); - jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev, - "clear break Finishing UART_LCR_SBC! finished: %lx\n", jiffies); + jsm_dbg(IOCTL, &ch->ch_bd->pci_dev, + "clear break Finishing UART_LCR_SBC! finished: %lx\n", + jiffies); /* flush write operation */ neo_pci_posting_flush(ch->ch_bd); @@ -748,8 +750,8 @@ static inline void neo_parse_isr(struct jsm_board *brd, u32 port) */ isr &= ~(UART_17158_IIR_FIFO_ENABLED); - jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev, - "%s:%d isr: %x\n", __FILE__, __LINE__, isr); + jsm_dbg(INTR, &ch->ch_bd->pci_dev, "%s:%d isr: %x\n", + __FILE__, __LINE__, isr); if (isr & (UART_17158_IIR_RDI_TIMEOUT | UART_IIR_RDI)) { /* Read data from uart -> queue */ @@ -772,8 +774,9 @@ static inline void neo_parse_isr(struct jsm_board *brd, u32 port) if (isr & UART_17158_IIR_XONXOFF) { cause = readb(&ch->ch_neo_uart->xoffchar1); - jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev, - "Port %d. Got ISR_XONXOFF: cause:%x\n", port, cause); + jsm_dbg(INTR, &ch->ch_bd->pci_dev, + "Port %d. Got ISR_XONXOFF: cause:%x\n", + port, cause); /* * Since the UART detected either an XON or @@ -786,17 +789,19 @@ static inline void neo_parse_isr(struct jsm_board *brd, u32 port) if (brd->channels[port]->ch_flags & CH_STOP) { ch->ch_flags &= ~(CH_STOP); } - jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev, - "Port %d. XON detected in incoming data\n", port); + jsm_dbg(INTR, &ch->ch_bd->pci_dev, + "Port %d. XON detected in incoming data\n", + port); } else if (cause == UART_17158_XOFF_DETECT) { if (!(brd->channels[port]->ch_flags & CH_STOP)) { ch->ch_flags |= CH_STOP; - jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev, - "Setting CH_STOP\n"); + jsm_dbg(INTR, &ch->ch_bd->pci_dev, + "Setting CH_STOP\n"); } - jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev, - "Port: %d. XOFF detected in incoming data\n", port); + jsm_dbg(INTR, &ch->ch_bd->pci_dev, + "Port: %d. XOFF detected in incoming data\n", + port); } spin_unlock_irqrestore(&ch->ch_lock, lock_flags); } @@ -825,8 +830,8 @@ static inline void neo_parse_isr(struct jsm_board *brd, u32 port) } /* Parse any modem signal changes */ - jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev, - "MOD_STAT: sending to parse_modem_sigs\n"); + jsm_dbg(INTR, &ch->ch_bd->pci_dev, + "MOD_STAT: sending to parse_modem_sigs\n"); neo_parse_modem(ch, readb(&ch->ch_neo_uart->msr)); } } @@ -849,8 +854,8 @@ static inline void neo_parse_lsr(struct jsm_board *brd, u32 port) linestatus = readb(&ch->ch_neo_uart->lsr); - jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev, - "%s:%d port: %d linestatus: %x\n", __FILE__, __LINE__, port, linestatus); + jsm_dbg(INTR, &ch->ch_bd->pci_dev, "%s:%d port: %d linestatus: %x\n", + __FILE__, __LINE__, port, linestatus); ch->ch_cached_lsr |= linestatus; @@ -869,7 +874,7 @@ static inline void neo_parse_lsr(struct jsm_board *brd, u32 port) *to do the special RX+LSR read for this FIFO load. */ if (linestatus & UART_17158_RX_FIFO_DATA_ERROR) - jsm_printk(INTR, DEBUG, &ch->ch_bd->pci_dev, + jsm_dbg(INTR, &ch->ch_bd->pci_dev, "%s:%d Port: %d Got an RX error, need to parse LSR\n", __FILE__, __LINE__, port); @@ -880,20 +885,21 @@ static inline void neo_parse_lsr(struct jsm_board *brd, u32 port) if (linestatus & UART_LSR_PE) { ch->ch_err_parity++; - jsm_printk(INTR, DEBUG, &ch->ch_bd->pci_dev, - "%s:%d Port: %d. PAR ERR!\n", __FILE__, __LINE__, port); + jsm_dbg(INTR, &ch->ch_bd->pci_dev, "%s:%d Port: %d. PAR ERR!\n", + __FILE__, __LINE__, port); } if (linestatus & UART_LSR_FE) { ch->ch_err_frame++; - jsm_printk(INTR, DEBUG, &ch->ch_bd->pci_dev, - "%s:%d Port: %d. FRM ERR!\n", __FILE__, __LINE__, port); + jsm_dbg(INTR, &ch->ch_bd->pci_dev, "%s:%d Port: %d. FRM ERR!\n", + __FILE__, __LINE__, port); } if (linestatus & UART_LSR_BI) { ch->ch_err_break++; - jsm_printk(INTR, DEBUG, &ch->ch_bd->pci_dev, - "%s:%d Port: %d. BRK INTR!\n", __FILE__, __LINE__, port); + jsm_dbg(INTR, &ch->ch_bd->pci_dev, + "%s:%d Port: %d. BRK INTR!\n", + __FILE__, __LINE__, port); } if (linestatus & UART_LSR_OE) { @@ -904,8 +910,9 @@ static inline void neo_parse_lsr(struct jsm_board *brd, u32 port) * Probably we should eventually have an orun stat in our driver... */ ch->ch_err_overrun++; - jsm_printk(INTR, DEBUG, &ch->ch_bd->pci_dev, - "%s:%d Port: %d. Rx Overrun!\n", __FILE__, __LINE__, port); + jsm_dbg(INTR, &ch->ch_bd->pci_dev, + "%s:%d Port: %d. Rx Overrun!\n", + __FILE__, __LINE__, port); } if (linestatus & UART_LSR_THRE) { @@ -1128,11 +1135,11 @@ static irqreturn_t neo_intr(int irq, void *voidbrd) */ uart_poll = readl(brd->re_map_membase + UART_17158_POLL_ADDR_OFFSET); - jsm_printk(INTR, INFO, &brd->pci_dev, - "%s:%d uart_poll: %x\n", __FILE__, __LINE__, uart_poll); + jsm_dbg(INTR, &brd->pci_dev, "%s:%d uart_poll: %x\n", + __FILE__, __LINE__, uart_poll); if (!uart_poll) { - jsm_printk(INTR, INFO, &brd->pci_dev, + jsm_dbg(INTR, &brd->pci_dev, "Kernel interrupted to me, but no pending interrupts...\n"); spin_unlock_irqrestore(&brd->bd_intr_lock, lock_flags); return IRQ_NONE; @@ -1158,15 +1165,15 @@ static irqreturn_t neo_intr(int irq, void *voidbrd) continue; } - jsm_printk(INTR, INFO, &brd->pci_dev, - "%s:%d port: %x type: %x\n", __FILE__, __LINE__, port, type); + jsm_dbg(INTR, &brd->pci_dev, "%s:%d port: %x type: %x\n", + __FILE__, __LINE__, port, type); /* Remove this port + type from uart_poll */ uart_poll &= ~(jsm_offset_table[port]); if (!type) { /* If no type, just ignore it, and move onto next port */ - jsm_printk(INTR, ERR, &brd->pci_dev, + jsm_dbg(INTR, &brd->pci_dev, "Interrupt with no type! port: %d\n", port); continue; } @@ -1231,15 +1238,16 @@ static irqreturn_t neo_intr(int irq, void *voidbrd) * these once and awhile. * Its harmless, just ignore it and move on. */ - jsm_printk(INTR, ERR, &brd->pci_dev, - "%s:%d Unknown Interrupt type: %x\n", __FILE__, __LINE__, type); + jsm_dbg(INTR, &brd->pci_dev, + "%s:%d Unknown Interrupt type: %x\n", + __FILE__, __LINE__, type); continue; } } spin_unlock_irqrestore(&brd->bd_intr_lock, lock_flags); - jsm_printk(INTR, INFO, &brd->pci_dev, "finish.\n"); + jsm_dbg(INTR, &brd->pci_dev, "finish\n"); return IRQ_HANDLED; } diff --git a/drivers/tty/serial/jsm/jsm_tty.c b/drivers/tty/serial/jsm/jsm_tty.c index 71397961773..4c00c5550b1 100644 --- a/drivers/tty/serial/jsm/jsm_tty.c +++ b/drivers/tty/serial/jsm/jsm_tty.c @@ -43,7 +43,7 @@ static inline int jsm_get_mstat(struct jsm_channel *ch) unsigned char mstat; unsigned result; - jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev, "start\n"); + jsm_dbg(IOCTL, &ch->ch_bd->pci_dev, "start\n"); mstat = (ch->ch_mostat | ch->ch_mistat); @@ -62,7 +62,7 @@ static inline int jsm_get_mstat(struct jsm_channel *ch) if (mstat & UART_MSR_DCD) result |= TIOCM_CD; - jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev, "finish\n"); + jsm_dbg(IOCTL, &ch->ch_bd->pci_dev, "finish\n"); return result; } @@ -79,14 +79,14 @@ static unsigned int jsm_tty_get_mctrl(struct uart_port *port) int result; struct jsm_channel *channel = (struct jsm_channel *)port; - jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "start\n"); + jsm_dbg(IOCTL, &channel->ch_bd->pci_dev, "start\n"); result = jsm_get_mstat(channel); if (result < 0) return -ENXIO; - jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "finish\n"); + jsm_dbg(IOCTL, &channel->ch_bd->pci_dev, "finish\n"); return result; } @@ -100,7 +100,7 @@ static void jsm_tty_set_mctrl(struct uart_port *port, unsigned int mctrl) { struct jsm_channel *channel = (struct jsm_channel *)port; - jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "start\n"); + jsm_dbg(IOCTL, &channel->ch_bd->pci_dev, "start\n"); if (mctrl & TIOCM_RTS) channel->ch_mostat |= UART_MCR_RTS; @@ -114,7 +114,7 @@ static void jsm_tty_set_mctrl(struct uart_port *port, unsigned int mctrl) channel->ch_bd->bd_ops->assert_modem_signals(channel); - jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "finish\n"); + jsm_dbg(IOCTL, &channel->ch_bd->pci_dev, "finish\n"); udelay(10); } @@ -135,23 +135,23 @@ static void jsm_tty_start_tx(struct uart_port *port) { struct jsm_channel *channel = (struct jsm_channel *)port; - jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "start\n"); + jsm_dbg(IOCTL, &channel->ch_bd->pci_dev, "start\n"); channel->ch_flags &= ~(CH_STOP); jsm_tty_write(port); - jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "finish\n"); + jsm_dbg(IOCTL, &channel->ch_bd->pci_dev, "finish\n"); } static void jsm_tty_stop_tx(struct uart_port *port) { struct jsm_channel *channel = (struct jsm_channel *)port; - jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "start\n"); + jsm_dbg(IOCTL, &channel->ch_bd->pci_dev, "start\n"); channel->ch_flags |= (CH_STOP); - jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "finish\n"); + jsm_dbg(IOCTL, &channel->ch_bd->pci_dev, "finish\n"); } static void jsm_tty_send_xchar(struct uart_port *port, char ch) @@ -216,16 +216,16 @@ static int jsm_tty_open(struct uart_port *port) if (!channel->ch_rqueue) { channel->ch_rqueue = kzalloc(RQUEUESIZE, GFP_KERNEL); if (!channel->ch_rqueue) { - jsm_printk(INIT, ERR, &channel->ch_bd->pci_dev, - "unable to allocate read queue buf"); + jsm_dbg(INIT, &channel->ch_bd->pci_dev, + "unable to allocate read queue buf\n"); return -ENOMEM; } } if (!channel->ch_equeue) { channel->ch_equeue = kzalloc(EQUEUESIZE, GFP_KERNEL); if (!channel->ch_equeue) { - jsm_printk(INIT, ERR, &channel->ch_bd->pci_dev, - "unable to allocate error queue buf"); + jsm_dbg(INIT, &channel->ch_bd->pci_dev, + "unable to allocate error queue buf\n"); return -ENOMEM; } } @@ -234,7 +234,7 @@ static int jsm_tty_open(struct uart_port *port) /* * Initialize if neither terminal is open. */ - jsm_printk(OPEN, INFO, &channel->ch_bd->pci_dev, + jsm_dbg(OPEN, &channel->ch_bd->pci_dev, "jsm_open: initializing channel in open...\n"); /* @@ -270,7 +270,7 @@ static int jsm_tty_open(struct uart_port *port) channel->ch_open_count++; - jsm_printk(OPEN, INFO, &channel->ch_bd->pci_dev, "finish\n"); + jsm_dbg(OPEN, &channel->ch_bd->pci_dev, "finish\n"); return 0; } @@ -280,7 +280,7 @@ static void jsm_tty_close(struct uart_port *port) struct ktermios *ts; struct jsm_channel *channel = (struct jsm_channel *)port; - jsm_printk(CLOSE, INFO, &channel->ch_bd->pci_dev, "start\n"); + jsm_dbg(CLOSE, &channel->ch_bd->pci_dev, "start\n"); bd = channel->ch_bd; ts = &port->state->port.tty->termios; @@ -293,7 +293,7 @@ static void jsm_tty_close(struct uart_port *port) * If we have HUPCL set, lower DTR and RTS */ if (channel->ch_c_cflag & HUPCL) { - jsm_printk(CLOSE, INFO, &channel->ch_bd->pci_dev, + jsm_dbg(CLOSE, &channel->ch_bd->pci_dev, "Close. HUPCL set, dropping DTR/RTS\n"); /* Drop RTS/DTR */ @@ -304,7 +304,7 @@ static void jsm_tty_close(struct uart_port *port) /* Turn off UART interrupts for this port */ channel->ch_bd->bd_ops->uart_off(channel); - jsm_printk(CLOSE, INFO, &channel->ch_bd->pci_dev, "finish\n"); + jsm_dbg(CLOSE, &channel->ch_bd->pci_dev, "finish\n"); } static void jsm_tty_set_termios(struct uart_port *port, @@ -371,7 +371,7 @@ static struct uart_ops jsm_ops = { * Init the tty subsystem. Called once per board after board has been * downloaded and init'ed. */ -int __devinit jsm_tty_init(struct jsm_board *brd) +int jsm_tty_init(struct jsm_board *brd) { int i; void __iomem *vaddr; @@ -380,7 +380,7 @@ int __devinit jsm_tty_init(struct jsm_board *brd) if (!brd) return -ENXIO; - jsm_printk(INIT, INFO, &brd->pci_dev, "start\n"); + jsm_dbg(INIT, &brd->pci_dev, "start\n"); /* * Initialize board structure elements. @@ -401,9 +401,9 @@ int __devinit jsm_tty_init(struct jsm_board *brd) */ brd->channels[i] = kzalloc(sizeof(struct jsm_channel), GFP_KERNEL); if (!brd->channels[i]) { - jsm_printk(CORE, ERR, &brd->pci_dev, + jsm_dbg(CORE, &brd->pci_dev, "%s:%d Unable to allocate memory for channel struct\n", - __FILE__, __LINE__); + __FILE__, __LINE__); } } } @@ -431,7 +431,7 @@ int __devinit jsm_tty_init(struct jsm_board *brd) init_waitqueue_head(&ch->ch_flags_wait); } - jsm_printk(INIT, INFO, &brd->pci_dev, "finish\n"); + jsm_dbg(INIT, &brd->pci_dev, "finish\n"); return 0; } @@ -444,7 +444,7 @@ int jsm_uart_port_init(struct jsm_board *brd) if (!brd) return -ENXIO; - jsm_printk(INIT, INFO, &brd->pci_dev, "start\n"); + jsm_dbg(INIT, &brd->pci_dev, "start\n"); /* * Initialize board structure elements. @@ -481,7 +481,7 @@ int jsm_uart_port_init(struct jsm_board *brd) printk(KERN_INFO "jsm: Port %d added\n", i); } - jsm_printk(INIT, INFO, &brd->pci_dev, "finish\n"); + jsm_dbg(INIT, &brd->pci_dev, "finish\n"); return 0; } @@ -493,7 +493,7 @@ int jsm_remove_uart_port(struct jsm_board *brd) if (!brd) return -ENXIO; - jsm_printk(INIT, INFO, &brd->pci_dev, "start\n"); + jsm_dbg(INIT, &brd->pci_dev, "start\n"); /* * Initialize board structure elements. @@ -513,7 +513,7 @@ int jsm_remove_uart_port(struct jsm_board *brd) uart_remove_one_port(&jsm_uart_driver, &brd->channels[i]->uart_port); } - jsm_printk(INIT, INFO, &brd->pci_dev, "finish\n"); + jsm_dbg(INIT, &brd->pci_dev, "finish\n"); return 0; } @@ -531,7 +531,7 @@ void jsm_input(struct jsm_channel *ch) int s = 0; int i = 0; - jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "start\n"); + jsm_dbg(READ, &ch->ch_bd->pci_dev, "start\n"); if (!ch) return; @@ -560,7 +560,7 @@ void jsm_input(struct jsm_channel *ch) return; } - jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "start\n"); + jsm_dbg(READ, &ch->ch_bd->pci_dev, "start\n"); /* *If the device is not open, or CREAD is off, flush @@ -569,8 +569,9 @@ void jsm_input(struct jsm_channel *ch) if (!tp || !(tp->termios.c_cflag & CREAD) ) { - jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, - "input. dropping %d bytes on port %d...\n", data_len, ch->ch_portnum); + jsm_dbg(READ, &ch->ch_bd->pci_dev, + "input. dropping %d bytes on port %d...\n", + data_len, ch->ch_portnum); ch->ch_r_head = tail; /* Force queue flow control to be released, if needed */ @@ -585,17 +586,17 @@ void jsm_input(struct jsm_channel *ch) */ if (ch->ch_flags & CH_STOPI) { spin_unlock_irqrestore(&ch->ch_lock, lock_flags); - jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, + jsm_dbg(READ, &ch->ch_bd->pci_dev, "Port %d throttled, not reading any data. head: %x tail: %x\n", ch->ch_portnum, head, tail); return; } - jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "start 2\n"); + jsm_dbg(READ, &ch->ch_bd->pci_dev, "start 2\n"); if (data_len <= 0) { spin_unlock_irqrestore(&ch->ch_lock, lock_flags); - jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "jsm_input 1\n"); + jsm_dbg(READ, &ch->ch_bd->pci_dev, "jsm_input 1\n"); return; } @@ -653,7 +654,7 @@ void jsm_input(struct jsm_channel *ch) /* Tell the tty layer its okay to "eat" the data now */ tty_flip_buffer_push(tp); - jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev, "finish\n"); + jsm_dbg(IOCTL, &ch->ch_bd->pci_dev, "finish\n"); } static void jsm_carrier(struct jsm_channel *ch) @@ -663,7 +664,7 @@ static void jsm_carrier(struct jsm_channel *ch) int virt_carrier = 0; int phys_carrier = 0; - jsm_printk(CARR, INFO, &ch->ch_bd->pci_dev, "start\n"); + jsm_dbg(CARR, &ch->ch_bd->pci_dev, "start\n"); if (!ch) return; @@ -673,16 +674,16 @@ static void jsm_carrier(struct jsm_channel *ch) return; if (ch->ch_mistat & UART_MSR_DCD) { - jsm_printk(CARR, INFO, &ch->ch_bd->pci_dev, - "mistat: %x D_CD: %x\n", ch->ch_mistat, ch->ch_mistat & UART_MSR_DCD); + jsm_dbg(CARR, &ch->ch_bd->pci_dev, "mistat: %x D_CD: %x\n", + ch->ch_mistat, ch->ch_mistat & UART_MSR_DCD); phys_carrier = 1; } if (ch->ch_c_cflag & CLOCAL) virt_carrier = 1; - jsm_printk(CARR, INFO, &ch->ch_bd->pci_dev, - "DCD: physical: %d virt: %d\n", phys_carrier, virt_carrier); + jsm_dbg(CARR, &ch->ch_bd->pci_dev, "DCD: physical: %d virt: %d\n", + phys_carrier, virt_carrier); /* * Test for a VIRTUAL carrier transition to HIGH. @@ -694,8 +695,7 @@ static void jsm_carrier(struct jsm_channel *ch) * for carrier in the open routine. */ - jsm_printk(CARR, INFO, &ch->ch_bd->pci_dev, - "carrier: virt DCD rose\n"); + jsm_dbg(CARR, &ch->ch_bd->pci_dev, "carrier: virt DCD rose\n"); if (waitqueue_active(&(ch->ch_flags_wait))) wake_up_interruptible(&ch->ch_flags_wait); @@ -711,7 +711,7 @@ static void jsm_carrier(struct jsm_channel *ch) * for carrier in the open routine. */ - jsm_printk(CARR, INFO, &ch->ch_bd->pci_dev, + jsm_dbg(CARR, &ch->ch_bd->pci_dev, "carrier: physical DCD rose\n"); if (waitqueue_active(&(ch->ch_flags_wait))) @@ -790,8 +790,8 @@ void jsm_check_queue_flow_control(struct jsm_channel *ch) if(!(ch->ch_flags & CH_RECEIVER_OFF)) { bd_ops->disable_receiver(ch); ch->ch_flags |= (CH_RECEIVER_OFF); - jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, - "Internal queue hit hilevel mark (%d)! Turning off interrupts.\n", + jsm_dbg(READ, &ch->ch_bd->pci_dev, + "Internal queue hit hilevel mark (%d)! Turning off interrupts\n", qleft); } } @@ -800,8 +800,9 @@ void jsm_check_queue_flow_control(struct jsm_channel *ch) if (ch->ch_stops_sent <= MAX_STOPS_SENT) { bd_ops->send_stop_character(ch); ch->ch_stops_sent++; - jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, - "Sending stop char! Times sent: %x\n", ch->ch_stops_sent); + jsm_dbg(READ, &ch->ch_bd->pci_dev, + "Sending stop char! Times sent: %x\n", + ch->ch_stops_sent); } } } @@ -827,8 +828,8 @@ void jsm_check_queue_flow_control(struct jsm_channel *ch) if (ch->ch_flags & CH_RECEIVER_OFF) { bd_ops->enable_receiver(ch); ch->ch_flags &= ~(CH_RECEIVER_OFF); - jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, - "Internal queue hit lowlevel mark (%d)! Turning on interrupts.\n", + jsm_dbg(READ, &ch->ch_bd->pci_dev, + "Internal queue hit lowlevel mark (%d)! Turning on interrupts\n", qleft); } } @@ -836,7 +837,8 @@ void jsm_check_queue_flow_control(struct jsm_channel *ch) else if (ch->ch_c_iflag & IXOFF && ch->ch_stops_sent) { ch->ch_stops_sent = 0; bd_ops->send_start_character(ch); - jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "Sending start char!\n"); + jsm_dbg(READ, &ch->ch_bd->pci_dev, + "Sending start char!\n"); } } } diff --git a/drivers/tty/serial/kgdb_nmi.c b/drivers/tty/serial/kgdb_nmi.c index d185247ba1a..6ac2b797a76 100644 --- a/drivers/tty/serial/kgdb_nmi.c +++ b/drivers/tty/serial/kgdb_nmi.c @@ -266,6 +266,7 @@ static int kgdb_nmi_tty_install(struct tty_driver *drv, struct tty_struct *tty) } return 0; err: + tty_port_destroy(&priv->port); kfree(priv); return ret; } @@ -275,6 +276,7 @@ static void kgdb_nmi_tty_cleanup(struct tty_struct *tty) struct kgdb_nmi_tty_priv *priv = tty->driver_data; tty->driver_data = NULL; + tty_port_destroy(&priv->port); kfree(priv); } diff --git a/drivers/tty/serial/lpc32xx_hs.c b/drivers/tty/serial/lpc32xx_hs.c index ba3af3bf6d4..0e86bff3fe2 100644 --- a/drivers/tty/serial/lpc32xx_hs.c +++ b/drivers/tty/serial/lpc32xx_hs.c @@ -686,7 +686,7 @@ static struct uart_ops serial_lpc32xx_pops = { /* * Register a set of serial devices attached to a platform device */ -static int __devinit serial_hs_lpc32xx_probe(struct platform_device *pdev) +static int serial_hs_lpc32xx_probe(struct platform_device *pdev) { struct lpc32xx_hsuart_port *p = &lpc32xx_hs_ports[uarts_registered]; int ret = 0; @@ -740,7 +740,7 @@ static int __devinit serial_hs_lpc32xx_probe(struct platform_device *pdev) /* * Remove serial ports registered against a platform device. */ -static int __devexit serial_hs_lpc32xx_remove(struct platform_device *pdev) +static int serial_hs_lpc32xx_remove(struct platform_device *pdev) { struct lpc32xx_hsuart_port *p = platform_get_drvdata(pdev); @@ -783,7 +783,7 @@ MODULE_DEVICE_TABLE(of, serial_hs_lpc32xx_dt_ids); static struct platform_driver serial_hs_lpc32xx_driver = { .probe = serial_hs_lpc32xx_probe, - .remove = __devexit_p(serial_hs_lpc32xx_remove), + .remove = serial_hs_lpc32xx_remove, .suspend = serial_hs_lpc32xx_suspend, .resume = serial_hs_lpc32xx_resume, .driver = { diff --git a/drivers/tty/serial/max3100.c b/drivers/tty/serial/max3100.c index 0f24486be53..7ce3197087b 100644 --- a/drivers/tty/serial/max3100.c +++ b/drivers/tty/serial/max3100.c @@ -742,7 +742,7 @@ static struct uart_driver max3100_uart_driver = { }; static int uart_driver_registered; -static int __devinit max3100_probe(struct spi_device *spi) +static int max3100_probe(struct spi_device *spi) { int i, retval; struct plat_max3100 *pdata; @@ -818,7 +818,7 @@ static int __devinit max3100_probe(struct spi_device *spi) return 0; } -static int __devexit max3100_remove(struct spi_device *spi) +static int max3100_remove(struct spi_device *spi) { struct max3100_port *s = dev_get_drvdata(&spi->dev); int i; @@ -907,7 +907,7 @@ static struct spi_driver max3100_driver = { }, .probe = max3100_probe, - .remove = __devexit_p(max3100_remove), + .remove = max3100_remove, .suspend = max3100_suspend, .resume = max3100_resume, }; diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c index 1ab1d2c66de..a801f6872ca 100644 --- a/drivers/tty/serial/max310x.c +++ b/drivers/tty/serial/max310x.c @@ -378,7 +378,7 @@ static void max310x_wait_pll(struct max310x_port *s) } } -static int __devinit max310x_update_best_err(unsigned long f, long *besterr) +static int max310x_update_best_err(unsigned long f, long *besterr) { /* Use baudrate 115200 for calculate error */ long err = f % (115200 * 16); @@ -391,7 +391,7 @@ static int __devinit max310x_update_best_err(unsigned long f, long *besterr) return 1; } -static int __devinit max310x_set_ref_clk(struct max310x_port *s) +static int max310x_set_ref_clk(struct max310x_port *s) { unsigned int div, clksrc, pllcfg = 0; long besterr = -1; @@ -995,7 +995,7 @@ static struct max310x_pdata generic_plat_data = { .frequency = 26000000, }; -static int __devinit max310x_probe(struct spi_device *spi) +static int max310x_probe(struct spi_device *spi) { struct max310x_port *s; struct device *dev = &spi->dev; @@ -1178,6 +1178,7 @@ static int __devinit max310x_probe(struct spi_device *spi) s->gpio.set = max310x_gpio_set; s->gpio.base = pdata->gpio_base; s->gpio.ngpio = s->nr_gpio; + s->gpio.can_sleep = 1; if (gpiochip_add(&s->gpio)) { /* Indicate that we should not call gpiochip_remove */ s->gpio.base = 0; @@ -1202,7 +1203,7 @@ err_out: return ret; } -static int __devexit max310x_remove(struct spi_device *spi) +static int max310x_remove(struct spi_device *spi) { struct device *dev = &spi->dev; struct max310x_port *s = dev_get_drvdata(dev); @@ -1249,7 +1250,7 @@ static struct spi_driver max310x_driver = { .owner = THIS_MODULE, }, .probe = max310x_probe, - .remove = __devexit_p(max310x_remove), + .remove = max310x_remove, .suspend = max310x_suspend, .resume = max310x_resume, .id_table = max310x_id_table, diff --git a/drivers/tty/serial/mcf.c b/drivers/tty/serial/mcf.c index 9afca093d6e..fcd56ab6053 100644 --- a/drivers/tty/serial/mcf.c +++ b/drivers/tty/serial/mcf.c @@ -571,7 +571,7 @@ static struct uart_driver mcf_driver = { /****************************************************************************/ -static int __devinit mcf_probe(struct platform_device *pdev) +static int mcf_probe(struct platform_device *pdev) { struct mcf_platform_uart *platp = pdev->dev.platform_data; struct uart_port *port; @@ -599,7 +599,7 @@ static int __devinit mcf_probe(struct platform_device *pdev) /****************************************************************************/ -static int __devexit mcf_remove(struct platform_device *pdev) +static int mcf_remove(struct platform_device *pdev) { struct uart_port *port; int i; @@ -617,7 +617,7 @@ static int __devexit mcf_remove(struct platform_device *pdev) static struct platform_driver mcf_platform_driver = { .probe = mcf_probe, - .remove = __devexit_p(mcf_remove), + .remove = mcf_remove, .driver = { .name = "mcfuart", .owner = THIS_MODULE, diff --git a/drivers/tty/serial/mfd.c b/drivers/tty/serial/mfd.c index c4b50af46c4..2c01344dc33 100644 --- a/drivers/tty/serial/mfd.c +++ b/drivers/tty/serial/mfd.c @@ -36,6 +36,7 @@ #include <linux/serial_mfd.h> #include <linux/dma-mapping.h> #include <linux/pci.h> +#include <linux/nmi.h> #include <linux/io.h> #include <linux/debugfs.h> #include <linux/pm_runtime.h> @@ -1113,6 +1114,8 @@ serial_hsu_console_write(struct console *co, const char *s, unsigned int count) unsigned int ier; int locked = 1; + touch_nmi_watchdog(); + local_irq_save(flags); if (up->port.sysrq) locked = 0; @@ -1456,7 +1459,7 @@ static void serial_hsu_remove(struct pci_dev *pdev) } /* First 3 are UART ports, and the 4th is the DMA */ -static const struct pci_device_id pci_ids[] __devinitconst = { +static const struct pci_device_id pci_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081B) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081C) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081D) }, @@ -1468,7 +1471,7 @@ static struct pci_driver hsu_pci_driver = { .name = "HSU serial", .id_table = pci_ids, .probe = serial_hsu_probe, - .remove = __devexit_p(serial_hsu_remove), + .remove = serial_hsu_remove, .suspend = serial_hsu_suspend, .resume = serial_hsu_resume, .driver = { diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c index 8cf577008ad..7c23c4f4c58 100644 --- a/drivers/tty/serial/mpc52xx_uart.c +++ b/drivers/tty/serial/mpc52xx_uart.c @@ -1308,7 +1308,7 @@ static struct of_device_id mpc52xx_uart_of_match[] = { {}, }; -static int __devinit mpc52xx_uart_of_probe(struct platform_device *op) +static int mpc52xx_uart_of_probe(struct platform_device *op) { int idx = -1; unsigned int uartclk; diff --git a/drivers/tty/serial/mrst_max3110.c b/drivers/tty/serial/mrst_max3110.c index df2a2240a3a..58734d7e746 100644 --- a/drivers/tty/serial/mrst_max3110.c +++ b/drivers/tty/serial/mrst_max3110.c @@ -773,7 +773,7 @@ static int serial_m3110_resume(struct spi_device *spi) #define serial_m3110_resume NULL #endif -static int __devinit serial_m3110_probe(struct spi_device *spi) +static int serial_m3110_probe(struct spi_device *spi) { struct uart_max3110 *max; void *buffer; @@ -855,7 +855,7 @@ err_get_page: return ret; } -static int __devexit serial_m3110_remove(struct spi_device *dev) +static int serial_m3110_remove(struct spi_device *dev) { struct uart_max3110 *max = spi_get_drvdata(dev); @@ -879,7 +879,7 @@ static struct spi_driver uart_max3110_driver = { .owner = THIS_MODULE, }, .probe = serial_m3110_probe, - .remove = __devexit_p(serial_m3110_remove), + .remove = serial_m3110_remove, .suspend = serial_m3110_suspend, .resume = serial_m3110_resume, }; diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c index 033e0bc9eba..95fd39be293 100644 --- a/drivers/tty/serial/msm_serial.c +++ b/drivers/tty/serial/msm_serial.c @@ -917,7 +917,7 @@ static int __init msm_serial_probe(struct platform_device *pdev) return uart_add_one_port(&msm_uart_driver, port); } -static int __devexit msm_serial_remove(struct platform_device *pdev) +static int msm_serial_remove(struct platform_device *pdev) { struct msm_port *msm_port = platform_get_drvdata(pdev); diff --git a/drivers/tty/serial/msm_serial_hs.c b/drivers/tty/serial/msm_serial_hs.c index fca13dc73e2..1fa92284ade 100644 --- a/drivers/tty/serial/msm_serial_hs.c +++ b/drivers/tty/serial/msm_serial_hs.c @@ -401,7 +401,7 @@ static int msm_hs_request_port(struct uart_port *port) return 0; } -static int __devexit msm_hs_remove(struct platform_device *pdev) +static int msm_hs_remove(struct platform_device *pdev) { struct msm_hs_port *msm_uport; @@ -1521,7 +1521,7 @@ err_msm_hs_init_clk: } /* Initialize tx and rx data structures */ -static int __devinit uartdm_init_port(struct uart_port *uport) +static int uartdm_init_port(struct uart_port *uport) { int ret = 0; struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); @@ -1614,7 +1614,7 @@ err_tx_command_ptr_ptr: return ret; } -static int __devinit msm_hs_probe(struct platform_device *pdev) +static int msm_hs_probe(struct platform_device *pdev) { int ret; struct uart_port *uport; @@ -1838,7 +1838,7 @@ static const struct dev_pm_ops msm_hs_dev_pm_ops = { static struct platform_driver msm_serial_hs_platform_driver = { .probe = msm_hs_probe, - .remove = __devexit_p(msm_hs_remove), + .remove = msm_hs_remove, .driver = { .name = "msm_serial_hs", .owner = THIS_MODULE, diff --git a/drivers/tty/serial/mux.c b/drivers/tty/serial/mux.c index 7ea8a263fd9..e2775b6df5a 100644 --- a/drivers/tty/serial/mux.c +++ b/drivers/tty/serial/mux.c @@ -520,7 +520,7 @@ static int __init mux_probe(struct parisc_device *dev) return 0; } -static int __devexit mux_remove(struct parisc_device *dev) +static int mux_remove(struct parisc_device *dev) { int i, j; int port_count = (long)dev_get_drvdata(&dev->dev); @@ -571,14 +571,14 @@ static struct parisc_driver builtin_serial_mux_driver = { .name = "builtin_serial_mux", .id_table = builtin_mux_tbl, .probe = mux_probe, - .remove = __devexit_p(mux_remove), + .remove = mux_remove, }; static struct parisc_driver serial_mux_driver = { .name = "serial_mux", .id_table = mux_tbl, .probe = mux_probe, - .remove = __devexit_p(mux_remove), + .remove = mux_remove, }; /** diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c index 6db3baa39a9..6db23b035ef 100644 --- a/drivers/tty/serial/mxs-auart.c +++ b/drivers/tty/serial/mxs-auart.c @@ -34,6 +34,8 @@ #include <linux/io.h> #include <linux/pinctrl/consumer.h> #include <linux/of_device.h> +#include <linux/dma-mapping.h> +#include <linux/fsl/mxs-dma.h> #include <asm/cacheflush.h> @@ -71,6 +73,15 @@ #define AUART_CTRL0_SFTRST (1 << 31) #define AUART_CTRL0_CLKGATE (1 << 30) +#define AUART_CTRL0_RXTO_ENABLE (1 << 27) +#define AUART_CTRL0_RXTIMEOUT(v) (((v) & 0x7ff) << 16) +#define AUART_CTRL0_XFER_COUNT(v) ((v) & 0xffff) + +#define AUART_CTRL1_XFER_COUNT(v) ((v) & 0xffff) + +#define AUART_CTRL2_DMAONERR (1 << 26) +#define AUART_CTRL2_TXDMAE (1 << 25) +#define AUART_CTRL2_RXDMAE (1 << 24) #define AUART_CTRL2_CTSEN (1 << 15) #define AUART_CTRL2_RTSEN (1 << 14) @@ -111,29 +122,170 @@ #define AUART_STAT_BERR (1 << 18) #define AUART_STAT_PERR (1 << 17) #define AUART_STAT_FERR (1 << 16) +#define AUART_STAT_RXCOUNT_MASK 0xffff static struct uart_driver auart_driver; +enum mxs_auart_type { + IMX23_AUART, + IMX28_AUART, +}; + struct mxs_auart_port { struct uart_port port; - unsigned int flags; +#define MXS_AUART_DMA_CONFIG 0x1 +#define MXS_AUART_DMA_ENABLED 0x2 +#define MXS_AUART_DMA_TX_SYNC 2 /* bit 2 */ +#define MXS_AUART_DMA_RX_READY 3 /* bit 3 */ + unsigned long flags; unsigned int ctrl; + enum mxs_auart_type devtype; unsigned int irq; struct clk *clk; struct device *dev; + + /* for DMA */ + struct mxs_dma_data dma_data; + int dma_channel_rx, dma_channel_tx; + int dma_irq_rx, dma_irq_tx; + int dma_channel; + + struct scatterlist tx_sgl; + struct dma_chan *tx_dma_chan; + void *tx_dma_buf; + + struct scatterlist rx_sgl; + struct dma_chan *rx_dma_chan; + void *rx_dma_buf; +}; + +static struct platform_device_id mxs_auart_devtype[] = { + { .name = "mxs-auart-imx23", .driver_data = IMX23_AUART }, + { .name = "mxs-auart-imx28", .driver_data = IMX28_AUART }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(platform, mxs_auart_devtype); + +static struct of_device_id mxs_auart_dt_ids[] = { + { + .compatible = "fsl,imx28-auart", + .data = &mxs_auart_devtype[IMX28_AUART] + }, { + .compatible = "fsl,imx23-auart", + .data = &mxs_auart_devtype[IMX23_AUART] + }, { /* sentinel */ } }; +MODULE_DEVICE_TABLE(of, mxs_auart_dt_ids); + +static inline int is_imx28_auart(struct mxs_auart_port *s) +{ + return s->devtype == IMX28_AUART; +} + +static inline bool auart_dma_enabled(struct mxs_auart_port *s) +{ + return s->flags & MXS_AUART_DMA_ENABLED; +} static void mxs_auart_stop_tx(struct uart_port *u); #define to_auart_port(u) container_of(u, struct mxs_auart_port, port) -static inline void mxs_auart_tx_chars(struct mxs_auart_port *s) +static void mxs_auart_tx_chars(struct mxs_auart_port *s); + +static void dma_tx_callback(void *param) { + struct mxs_auart_port *s = param; struct circ_buf *xmit = &s->port.state->xmit; + dma_unmap_sg(s->dev, &s->tx_sgl, 1, DMA_TO_DEVICE); + + /* clear the bit used to serialize the DMA tx. */ + clear_bit(MXS_AUART_DMA_TX_SYNC, &s->flags); + smp_mb__after_clear_bit(); + + /* wake up the possible processes. */ + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&s->port); + + mxs_auart_tx_chars(s); +} + +static int mxs_auart_dma_tx(struct mxs_auart_port *s, int size) +{ + struct dma_async_tx_descriptor *desc; + struct scatterlist *sgl = &s->tx_sgl; + struct dma_chan *channel = s->tx_dma_chan; + u32 pio; + + /* [1] : send PIO. Note, the first pio word is CTRL1. */ + pio = AUART_CTRL1_XFER_COUNT(size); + desc = dmaengine_prep_slave_sg(channel, (struct scatterlist *)&pio, + 1, DMA_TRANS_NONE, 0); + if (!desc) { + dev_err(s->dev, "step 1 error\n"); + return -EINVAL; + } + + /* [2] : set DMA buffer. */ + sg_init_one(sgl, s->tx_dma_buf, size); + dma_map_sg(s->dev, sgl, 1, DMA_TO_DEVICE); + desc = dmaengine_prep_slave_sg(channel, sgl, + 1, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc) { + dev_err(s->dev, "step 2 error\n"); + return -EINVAL; + } + + /* [3] : submit the DMA */ + desc->callback = dma_tx_callback; + desc->callback_param = s; + dmaengine_submit(desc); + dma_async_issue_pending(channel); + return 0; +} + +static void mxs_auart_tx_chars(struct mxs_auart_port *s) +{ + struct circ_buf *xmit = &s->port.state->xmit; + + if (auart_dma_enabled(s)) { + int i = 0; + int size; + void *buffer = s->tx_dma_buf; + + if (test_and_set_bit(MXS_AUART_DMA_TX_SYNC, &s->flags)) + return; + + while (!uart_circ_empty(xmit) && !uart_tx_stopped(&s->port)) { + size = min_t(u32, UART_XMIT_SIZE - i, + CIRC_CNT_TO_END(xmit->head, + xmit->tail, + UART_XMIT_SIZE)); + memcpy(buffer + i, xmit->buf + xmit->tail, size); + xmit->tail = (xmit->tail + size) & (UART_XMIT_SIZE - 1); + + i += size; + if (i >= UART_XMIT_SIZE) + break; + } + + if (uart_tx_stopped(&s->port)) + mxs_auart_stop_tx(&s->port); + + if (i) { + mxs_auart_dma_tx(s, i); + } else { + clear_bit(MXS_AUART_DMA_TX_SYNC, &s->flags); + smp_mb__after_clear_bit(); + } + return; + } + + while (!(readl(s->port.membase + AUART_STAT) & AUART_STAT_TXFF)) { if (s->port.x_char) { @@ -287,10 +439,159 @@ static u32 mxs_auart_get_mctrl(struct uart_port *u) return mctrl; } +static bool mxs_auart_dma_filter(struct dma_chan *chan, void *param) +{ + struct mxs_auart_port *s = param; + + if (!mxs_dma_is_apbx(chan)) + return false; + + if (s->dma_channel == chan->chan_id) { + chan->private = &s->dma_data; + return true; + } + return false; +} + +static int mxs_auart_dma_prep_rx(struct mxs_auart_port *s); +static void dma_rx_callback(void *arg) +{ + struct mxs_auart_port *s = (struct mxs_auart_port *) arg; + struct tty_struct *tty = s->port.state->port.tty; + int count; + u32 stat; + + dma_unmap_sg(s->dev, &s->rx_sgl, 1, DMA_FROM_DEVICE); + + stat = readl(s->port.membase + AUART_STAT); + stat &= ~(AUART_STAT_OERR | AUART_STAT_BERR | + AUART_STAT_PERR | AUART_STAT_FERR); + + count = stat & AUART_STAT_RXCOUNT_MASK; + tty_insert_flip_string(tty, s->rx_dma_buf, count); + + writel(stat, s->port.membase + AUART_STAT); + tty_flip_buffer_push(tty); + + /* start the next DMA for RX. */ + mxs_auart_dma_prep_rx(s); +} + +static int mxs_auart_dma_prep_rx(struct mxs_auart_port *s) +{ + struct dma_async_tx_descriptor *desc; + struct scatterlist *sgl = &s->rx_sgl; + struct dma_chan *channel = s->rx_dma_chan; + u32 pio[1]; + + /* [1] : send PIO */ + pio[0] = AUART_CTRL0_RXTO_ENABLE + | AUART_CTRL0_RXTIMEOUT(0x80) + | AUART_CTRL0_XFER_COUNT(UART_XMIT_SIZE); + desc = dmaengine_prep_slave_sg(channel, (struct scatterlist *)pio, + 1, DMA_TRANS_NONE, 0); + if (!desc) { + dev_err(s->dev, "step 1 error\n"); + return -EINVAL; + } + + /* [2] : send DMA request */ + sg_init_one(sgl, s->rx_dma_buf, UART_XMIT_SIZE); + dma_map_sg(s->dev, sgl, 1, DMA_FROM_DEVICE); + desc = dmaengine_prep_slave_sg(channel, sgl, 1, DMA_DEV_TO_MEM, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc) { + dev_err(s->dev, "step 2 error\n"); + return -1; + } + + /* [3] : submit the DMA, but do not issue it. */ + desc->callback = dma_rx_callback; + desc->callback_param = s; + dmaengine_submit(desc); + dma_async_issue_pending(channel); + return 0; +} + +static void mxs_auart_dma_exit_channel(struct mxs_auart_port *s) +{ + if (s->tx_dma_chan) { + dma_release_channel(s->tx_dma_chan); + s->tx_dma_chan = NULL; + } + if (s->rx_dma_chan) { + dma_release_channel(s->rx_dma_chan); + s->rx_dma_chan = NULL; + } + + kfree(s->tx_dma_buf); + kfree(s->rx_dma_buf); + s->tx_dma_buf = NULL; + s->rx_dma_buf = NULL; +} + +static void mxs_auart_dma_exit(struct mxs_auart_port *s) +{ + + writel(AUART_CTRL2_TXDMAE | AUART_CTRL2_RXDMAE | AUART_CTRL2_DMAONERR, + s->port.membase + AUART_CTRL2_CLR); + + mxs_auart_dma_exit_channel(s); + s->flags &= ~MXS_AUART_DMA_ENABLED; + clear_bit(MXS_AUART_DMA_TX_SYNC, &s->flags); + clear_bit(MXS_AUART_DMA_RX_READY, &s->flags); +} + +static int mxs_auart_dma_init(struct mxs_auart_port *s) +{ + dma_cap_mask_t mask; + + if (auart_dma_enabled(s)) + return 0; + + /* We do not get the right DMA channels. */ + if (s->dma_channel_rx == -1 || s->dma_channel_rx == -1) + return -EINVAL; + + /* init for RX */ + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + s->dma_channel = s->dma_channel_rx; + s->dma_data.chan_irq = s->dma_irq_rx; + s->rx_dma_chan = dma_request_channel(mask, mxs_auart_dma_filter, s); + if (!s->rx_dma_chan) + goto err_out; + s->rx_dma_buf = kzalloc(UART_XMIT_SIZE, GFP_KERNEL | GFP_DMA); + if (!s->rx_dma_buf) + goto err_out; + + /* init for TX */ + s->dma_channel = s->dma_channel_tx; + s->dma_data.chan_irq = s->dma_irq_tx; + s->tx_dma_chan = dma_request_channel(mask, mxs_auart_dma_filter, s); + if (!s->tx_dma_chan) + goto err_out; + s->tx_dma_buf = kzalloc(UART_XMIT_SIZE, GFP_KERNEL | GFP_DMA); + if (!s->tx_dma_buf) + goto err_out; + + /* set the flags */ + s->flags |= MXS_AUART_DMA_ENABLED; + dev_dbg(s->dev, "enabled the DMA support."); + + return 0; + +err_out: + mxs_auart_dma_exit_channel(s); + return -EINVAL; + +} + static void mxs_auart_settermios(struct uart_port *u, struct ktermios *termios, struct ktermios *old) { + struct mxs_auart_port *s = to_auart_port(u); u32 bm, ctrl, ctrl2, div; unsigned int cflag, baud; @@ -362,10 +663,23 @@ static void mxs_auart_settermios(struct uart_port *u, ctrl |= AUART_LINECTRL_STP2; /* figure out the hardware flow control settings */ - if (cflag & CRTSCTS) + if (cflag & CRTSCTS) { + /* + * The DMA has a bug(see errata:2836) in mx23. + * So we can not implement the DMA for auart in mx23, + * we can only implement the DMA support for auart + * in mx28. + */ + if (is_imx28_auart(s) && (s->flags & MXS_AUART_DMA_CONFIG)) { + if (!mxs_auart_dma_init(s)) + /* enable DMA tranfer */ + ctrl2 |= AUART_CTRL2_TXDMAE | AUART_CTRL2_RXDMAE + | AUART_CTRL2_DMAONERR; + } ctrl2 |= AUART_CTRL2_CTSEN | AUART_CTRL2_RTSEN; - else + } else { ctrl2 &= ~(AUART_CTRL2_CTSEN | AUART_CTRL2_RTSEN); + } /* set baud rate */ baud = uart_get_baud_rate(u, termios, old, 0, u->uartclk); @@ -377,6 +691,19 @@ static void mxs_auart_settermios(struct uart_port *u, writel(ctrl2, u->membase + AUART_CTRL2); uart_update_timeout(u, termios->c_cflag, baud); + + /* prepare for the DMA RX. */ + if (auart_dma_enabled(s) && + !test_and_set_bit(MXS_AUART_DMA_RX_READY, &s->flags)) { + if (!mxs_auart_dma_prep_rx(s)) { + /* Disable the normal RX interrupt. */ + writel(AUART_INTR_RXIEN | AUART_INTR_RTIEN, + u->membase + AUART_INTR_CLR); + } else { + mxs_auart_dma_exit(s); + dev_err(s->dev, "We can not start up the DMA.\n"); + } + } } static irqreturn_t mxs_auart_irq_handle(int irq, void *context) @@ -395,7 +722,8 @@ static irqreturn_t mxs_auart_irq_handle(int irq, void *context) } if (istat & (AUART_INTR_RTIS | AUART_INTR_RXIS)) { - mxs_auart_rx_chars(s); + if (!auart_dma_enabled(s)) + mxs_auart_rx_chars(s); istat &= ~(AUART_INTR_RTIS | AUART_INTR_RXIS); } @@ -455,6 +783,9 @@ static void mxs_auart_shutdown(struct uart_port *u) { struct mxs_auart_port *s = to_auart_port(u); + if (auart_dma_enabled(s)) + mxs_auart_dma_exit(s); + writel(AUART_CTRL2_UARTEN, u->membase + AUART_CTRL2_CLR); writel(AUART_INTR_RXIEN | AUART_INTR_RTIEN | AUART_INTR_CTSMIEN, @@ -688,6 +1019,7 @@ static int serial_mxs_probe_dt(struct mxs_auart_port *s, struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; + u32 dma_channel[2]; int ret; if (!np) @@ -701,11 +1033,27 @@ static int serial_mxs_probe_dt(struct mxs_auart_port *s, } s->port.line = ret; + s->dma_irq_rx = platform_get_irq(pdev, 1); + s->dma_irq_tx = platform_get_irq(pdev, 2); + + ret = of_property_read_u32_array(np, "fsl,auart-dma-channel", + dma_channel, 2); + if (ret == 0) { + s->dma_channel_rx = dma_channel[0]; + s->dma_channel_tx = dma_channel[1]; + + s->flags |= MXS_AUART_DMA_CONFIG; + } else { + s->dma_channel_rx = -1; + s->dma_channel_tx = -1; + } return 0; } -static int __devinit mxs_auart_probe(struct platform_device *pdev) +static int mxs_auart_probe(struct platform_device *pdev) { + const struct of_device_id *of_id = + of_match_device(mxs_auart_dt_ids, &pdev->dev); struct mxs_auart_port *s; u32 version; int ret = 0; @@ -730,6 +1078,11 @@ static int __devinit mxs_auart_probe(struct platform_device *pdev) goto out_free; } + if (of_id) { + pdev->id_entry = of_id->data; + s->devtype = pdev->id_entry->driver_data; + } + s->clk = clk_get(&pdev->dev, NULL); if (IS_ERR(s->clk)) { ret = PTR_ERR(s->clk); @@ -751,7 +1104,6 @@ static int __devinit mxs_auart_probe(struct platform_device *pdev) s->port.type = PORT_IMX; s->port.dev = s->dev = get_device(&pdev->dev); - s->flags = 0; s->ctrl = 0; s->irq = platform_get_irq(pdev, 0); @@ -789,7 +1141,7 @@ out: return ret; } -static int __devexit mxs_auart_remove(struct platform_device *pdev) +static int mxs_auart_remove(struct platform_device *pdev) { struct mxs_auart_port *s = platform_get_drvdata(pdev); @@ -805,15 +1157,9 @@ static int __devexit mxs_auart_remove(struct platform_device *pdev) return 0; } -static struct of_device_id mxs_auart_dt_ids[] = { - { .compatible = "fsl,imx23-auart", }, - { /* sentinel */ } -}; -MODULE_DEVICE_TABLE(of, mxs_auart_dt_ids); - static struct platform_driver mxs_auart_driver = { .probe = mxs_auart_probe, - .remove = __devexit_p(mxs_auart_remove), + .remove = mxs_auart_remove, .driver = { .name = "mxs-auart", .owner = THIS_MODULE, diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c index df443b908ca..e7cae1c2d7d 100644 --- a/drivers/tty/serial/of_serial.c +++ b/drivers/tty/serial/of_serial.c @@ -21,8 +21,10 @@ #include <linux/of_serial.h> #include <linux/of_platform.h> #include <linux/nwpserial.h> +#include <linux/clk.h> struct of_serial_info { + struct clk *clk; int type; int line; }; @@ -50,8 +52,9 @@ EXPORT_SYMBOL_GPL(tegra_serial_handle_break); /* * Fill a struct uart_port for a given device node */ -static int __devinit of_platform_serial_setup(struct platform_device *ofdev, - int type, struct uart_port *port) +static int of_platform_serial_setup(struct platform_device *ofdev, + int type, struct uart_port *port, + struct of_serial_info *info) { struct resource resource; struct device_node *np = ofdev->dev.of_node; @@ -60,8 +63,17 @@ static int __devinit of_platform_serial_setup(struct platform_device *ofdev, memset(port, 0, sizeof *port); if (of_property_read_u32(np, "clock-frequency", &clk)) { - dev_warn(&ofdev->dev, "no clock-frequency property set\n"); - return -ENODEV; + + /* Get clk rate through clk driver if present */ + info->clk = clk_get(&ofdev->dev, NULL); + if (IS_ERR(info->clk)) { + dev_warn(&ofdev->dev, + "clk or clock-frequency not defined\n"); + return PTR_ERR(info->clk); + } + + clk_prepare_enable(info->clk); + clk = clk_get_rate(info->clk); } /* If current-speed was set, then try not to change it. */ if (of_property_read_u32(np, "current-speed", &spd) == 0) @@ -70,7 +82,7 @@ static int __devinit of_platform_serial_setup(struct platform_device *ofdev, ret = of_address_to_resource(np, 0, &resource); if (ret) { dev_warn(&ofdev->dev, "invalid address\n"); - return ret; + goto out; } spin_lock_init(&port->lock); @@ -97,7 +109,8 @@ static int __devinit of_platform_serial_setup(struct platform_device *ofdev, default: dev_warn(&ofdev->dev, "unsupported reg-io-width (%d)\n", prop); - return -EINVAL; + ret = -EINVAL; + goto out; } } @@ -115,13 +128,17 @@ static int __devinit of_platform_serial_setup(struct platform_device *ofdev, port->handle_break = tegra_serial_handle_break; return 0; +out: + if (info->clk) + clk_disable_unprepare(info->clk); + return ret; } /* * Try to register a serial port */ static struct of_device_id of_platform_serial_table[]; -static int __devinit of_platform_serial_probe(struct platform_device *ofdev) +static int of_platform_serial_probe(struct platform_device *ofdev) { const struct of_device_id *match; struct of_serial_info *info; @@ -141,7 +158,7 @@ static int __devinit of_platform_serial_probe(struct platform_device *ofdev) return -ENOMEM; port_type = (unsigned long)match->data; - ret = of_platform_serial_setup(ofdev, port_type, &port); + ret = of_platform_serial_setup(ofdev, port_type, &port, info); if (ret) goto out; @@ -204,6 +221,9 @@ static int of_platform_serial_remove(struct platform_device *ofdev) /* need to add code for these */ break; } + + if (info->clk) + clk_disable_unprepare(info->clk); kfree(info); return 0; } @@ -211,7 +231,7 @@ static int of_platform_serial_remove(struct platform_device *ofdev) /* * A few common types, add more as needed. */ -static struct of_device_id __devinitdata of_platform_serial_table[] = { +static struct of_device_id of_platform_serial_table[] = { { .compatible = "ns8250", .data = (void *)PORT_8250, }, { .compatible = "ns16450", .data = (void *)PORT_16450, }, { .compatible = "ns16550a", .data = (void *)PORT_16550A, }, diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 6d3d26a607b..b538e2e4ae5 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -96,7 +96,7 @@ struct uart_omap_port { unsigned char msr_saved_flags; char name[20]; unsigned long port_activity; - u32 context_loss_cnt; + int context_loss_cnt; u32 errata; u8 wakeups_enabled; unsigned int irq_pending:1; @@ -702,11 +702,7 @@ serial_omap_configure_xonxoff serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); serial_out(up, UART_TI752_TCR, OMAP_UART_TCR_TRIG); - /* Enable special char function UARTi.EFR_REG[5] and - * load the new software flow control mode IXON or IXOFF - * and restore the UARTi.EFR_REG[4] ENHANCED_EN value. - */ - serial_out(up, UART_EFR, up->efr | UART_EFR_SCD); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); serial_out(up, UART_MCR, up->mcr & ~UART_MCR_TCRTLR); @@ -1081,7 +1077,7 @@ out: #ifdef CONFIG_SERIAL_OMAP_CONSOLE -static struct uart_omap_port *serial_omap_console_ports[4]; +static struct uart_omap_port *serial_omap_console_ports[OMAP_MAX_HSUART_PORTS]; static struct uart_driver serial_omap_reg; @@ -1242,7 +1238,7 @@ static int serial_omap_resume(struct device *dev) } #endif -static void __devinit omap_serial_fill_features_erratas(struct uart_omap_port *up) +static void omap_serial_fill_features_erratas(struct uart_omap_port *up) { u32 mvr, scheme; u16 revision, major, minor; @@ -1295,7 +1291,7 @@ static void __devinit omap_serial_fill_features_erratas(struct uart_omap_port *u } } -static __devinit struct omap_uart_port_info *of_get_uart_port_info(struct device *dev) +static struct omap_uart_port_info *of_get_uart_port_info(struct device *dev) { struct omap_uart_port_info *omap_up_info; @@ -1308,7 +1304,7 @@ static __devinit struct omap_uart_port_info *of_get_uart_port_info(struct device return omap_up_info; } -static int __devinit serial_omap_probe(struct platform_device *pdev) +static int serial_omap_probe(struct platform_device *pdev) { struct uart_omap_port *up; struct resource *mem, *irq; @@ -1445,7 +1441,7 @@ err_port_line: return ret; } -static int __devexit serial_omap_remove(struct platform_device *dev) +static int serial_omap_remove(struct platform_device *dev) { struct uart_omap_port *up = platform_get_drvdata(dev); @@ -1556,11 +1552,15 @@ static int serial_omap_runtime_resume(struct device *dev) { struct uart_omap_port *up = dev_get_drvdata(dev); - u32 loss_cnt = serial_omap_get_context_loss_count(up); + int loss_cnt = serial_omap_get_context_loss_count(up); - if (up->context_loss_cnt != loss_cnt) + if (loss_cnt < 0) { + dev_err(dev, "serial_omap_get_context_loss_count failed : %d\n", + loss_cnt); serial_omap_restore_context(up); - + } else if (up->context_loss_cnt != loss_cnt) { + serial_omap_restore_context(up); + } up->latency = up->calc_latency; schedule_work(&up->qos_work); @@ -1586,7 +1586,7 @@ MODULE_DEVICE_TABLE(of, omap_serial_of_match); static struct platform_driver serial_omap_driver = { .probe = serial_omap_probe, - .remove = __devexit_p(serial_omap_remove), + .remove = serial_omap_remove, .driver = { .name = DRIVER_NAME, .pm = &serial_omap_dev_pm_ops, diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index 4cd6c238152..8318925fbf6 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -1839,7 +1839,7 @@ static DEFINE_PCI_DEVICE_TABLE(pch_uart_pci_id) = { {0,}, }; -static int __devinit pch_uart_pci_probe(struct pci_dev *pdev, +static int pch_uart_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) { int ret; @@ -1869,7 +1869,7 @@ static struct pci_driver pch_uart_pci_driver = { .name = "pch_uart", .id_table = pch_uart_pci_id, .probe = pch_uart_pci_probe, - .remove = __devexit_p(pch_uart_pci_remove), + .remove = pch_uart_pci_remove, .suspend = pch_uart_pci_suspend, .resume = pch_uart_pci_resume, }; diff --git a/drivers/tty/serial/pxa.c b/drivers/tty/serial/pxa.c index 9033fc6e0e4..2764828251f 100644 --- a/drivers/tty/serial/pxa.c +++ b/drivers/tty/serial/pxa.c @@ -705,6 +705,57 @@ serial_pxa_console_write(struct console *co, const char *s, unsigned int count) clk_disable_unprepare(up->clk); } +#ifdef CONFIG_CONSOLE_POLL +/* + * Console polling routines for writing and reading from the uart while + * in an interrupt or debug context. + */ + +static int serial_pxa_get_poll_char(struct uart_port *port) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + unsigned char lsr = serial_in(up, UART_LSR); + + while (!(lsr & UART_LSR_DR)) + lsr = serial_in(up, UART_LSR); + + return serial_in(up, UART_RX); +} + + +static void serial_pxa_put_poll_char(struct uart_port *port, + unsigned char c) +{ + unsigned int ier; + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + + /* + * First save the IER then disable the interrupts + */ + ier = serial_in(up, UART_IER); + serial_out(up, UART_IER, UART_IER_UUE); + + wait_for_xmitr(up); + /* + * Send the character out. + * If a LF, also do CR... + */ + serial_out(up, UART_TX, c); + if (c == 10) { + wait_for_xmitr(up); + serial_out(up, UART_TX, 13); + } + + /* + * Finally, wait for transmitter to become empty + * and restore the IER + */ + wait_for_xmitr(up); + serial_out(up, UART_IER, ier); +} + +#endif /* CONFIG_CONSOLE_POLL */ + static int __init serial_pxa_console_setup(struct console *co, char *options) { @@ -759,6 +810,10 @@ struct uart_ops serial_pxa_pops = { .request_port = serial_pxa_request_port, .config_port = serial_pxa_config_port, .verify_port = serial_pxa_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = serial_pxa_get_poll_char, + .poll_put_char = serial_pxa_put_poll_char, +#endif }; static struct uart_driver serial_pxa_reg = { diff --git a/drivers/tty/serial/sa1100.c b/drivers/tty/serial/sa1100.c index 2ca5959ec3f..da56c8a0fdc 100644 --- a/drivers/tty/serial/sa1100.c +++ b/drivers/tty/serial/sa1100.c @@ -637,7 +637,7 @@ static void __init sa1100_init_ports(void) PPSR |= PPC_TXD1 | PPC_TXD3; } -void __devinit sa1100_register_uart_fns(struct sa1100_port_fns *fns) +void sa1100_register_uart_fns(struct sa1100_port_fns *fns) { if (fns->get_mctrl) sa1100_pops.get_mctrl = fns->get_mctrl; diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index 7f04717176a..fb0e0f0bed0 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -223,8 +223,11 @@ s3c24xx_serial_rx_chars(int irq, void *dev_id) struct uart_port *port = &ourport->port; struct tty_struct *tty = port->state->port.tty; unsigned int ufcon, ch, flag, ufstat, uerstat; + unsigned long flags; int max_count = 64; + spin_lock_irqsave(&port->lock, flags); + while (max_count-- > 0) { ufcon = rd_regl(port, S3C2410_UFCON); ufstat = rd_regl(port, S3C2410_UFSTAT); @@ -299,6 +302,7 @@ s3c24xx_serial_rx_chars(int irq, void *dev_id) tty_flip_buffer_push(tty); out: + spin_unlock_irqrestore(&port->lock, flags); return IRQ_HANDLED; } @@ -307,8 +311,11 @@ static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id) struct s3c24xx_uart_port *ourport = id; struct uart_port *port = &ourport->port; struct circ_buf *xmit = &port->state->xmit; + unsigned long flags; int count = 256; + spin_lock_irqsave(&port->lock, flags); + if (port->x_char) { wr_regb(port, S3C2410_UTXH, port->x_char); port->icount.tx++; @@ -336,13 +343,17 @@ static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id) port->icount.tx++; } - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) { + spin_unlock(&port->lock); uart_write_wakeup(port); + spin_lock(&port->lock); + } if (uart_circ_empty(xmit)) s3c24xx_serial_stop_tx(port); out: + spin_unlock_irqrestore(&port->lock, flags); return IRQ_HANDLED; } @@ -352,10 +363,8 @@ static irqreturn_t s3c64xx_serial_handle_irq(int irq, void *id) struct s3c24xx_uart_port *ourport = id; struct uart_port *port = &ourport->port; unsigned int pend = rd_regl(port, S3C64XX_UINTP); - unsigned long flags; irqreturn_t ret = IRQ_HANDLED; - spin_lock_irqsave(&port->lock, flags); if (pend & S3C64XX_UINTM_RXD_MSK) { ret = s3c24xx_serial_rx_chars(irq, id); wr_regl(port, S3C64XX_UINTP, S3C64XX_UINTM_RXD_MSK); @@ -364,7 +373,6 @@ static irqreturn_t s3c64xx_serial_handle_irq(int irq, void *id) ret = s3c24xx_serial_tx_chars(irq, id); wr_regl(port, S3C64XX_UINTP, S3C64XX_UINTM_TXD_MSK); } - spin_unlock_irqrestore(&port->lock, flags); return ret; } @@ -530,16 +538,16 @@ static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level, switch (level) { case 3: if (!IS_ERR(ourport->baudclk)) - clk_disable(ourport->baudclk); + clk_disable_unprepare(ourport->baudclk); - clk_disable(ourport->clk); + clk_disable_unprepare(ourport->clk); break; case 0: - clk_enable(ourport->clk); + clk_prepare_enable(ourport->clk); if (!IS_ERR(ourport->baudclk)) - clk_enable(ourport->baudclk); + clk_prepare_enable(ourport->baudclk); break; default: @@ -713,11 +721,11 @@ static void s3c24xx_serial_set_termios(struct uart_port *port, s3c24xx_serial_setsource(port, clk_sel); if (!IS_ERR(ourport->baudclk)) { - clk_disable(ourport->baudclk); + clk_disable_unprepare(ourport->baudclk); ourport->baudclk = ERR_PTR(-EINVAL); } - clk_enable(clk); + clk_prepare_enable(clk); ourport->baudclk = clk; ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0; @@ -1256,7 +1264,7 @@ static int s3c24xx_serial_probe(struct platform_device *pdev) return ret; } -static int __devexit s3c24xx_serial_remove(struct platform_device *dev) +static int s3c24xx_serial_remove(struct platform_device *dev) { struct uart_port *port = s3c24xx_dev_to_port(&dev->dev); @@ -1287,9 +1295,9 @@ static int s3c24xx_serial_resume(struct device *dev) struct s3c24xx_uart_port *ourport = to_ourport(port); if (port) { - clk_enable(ourport->clk); + clk_prepare_enable(ourport->clk); s3c24xx_serial_resetport(port, s3c24xx_port_to_cfg(port)); - clk_disable(ourport->clk); + clk_disable_unprepare(ourport->clk); uart_resume_port(&s3c24xx_uart_drv, port); } @@ -1701,6 +1709,16 @@ MODULE_DEVICE_TABLE(platform, s3c24xx_serial_driver_ids); #ifdef CONFIG_OF static const struct of_device_id s3c24xx_uart_dt_match[] = { + { .compatible = "samsung,s3c2410-uart", + .data = (void *)S3C2410_SERIAL_DRV_DATA }, + { .compatible = "samsung,s3c2412-uart", + .data = (void *)S3C2412_SERIAL_DRV_DATA }, + { .compatible = "samsung,s3c2440-uart", + .data = (void *)S3C2440_SERIAL_DRV_DATA }, + { .compatible = "samsung,s3c6400-uart", + .data = (void *)S3C6400_SERIAL_DRV_DATA }, + { .compatible = "samsung,s5pv210-uart", + .data = (void *)S5PV210_SERIAL_DRV_DATA }, { .compatible = "samsung,exynos4210-uart", .data = (void *)EXYNOS4210_SERIAL_DRV_DATA }, {}, @@ -1712,7 +1730,7 @@ MODULE_DEVICE_TABLE(of, s3c24xx_uart_dt_match); static struct platform_driver samsung_serial_driver = { .probe = s3c24xx_serial_probe, - .remove = __devexit_p(s3c24xx_serial_remove), + .remove = s3c24xx_serial_remove, .id_table = s3c24xx_serial_driver_ids, .driver = { .name = "samsung-uart", diff --git a/drivers/tty/serial/sc26xx.c b/drivers/tty/serial/sc26xx.c index 9d664242b31..aced1dd923d 100644 --- a/drivers/tty/serial/sc26xx.c +++ b/drivers/tty/serial/sc26xx.c @@ -621,7 +621,7 @@ static u8 sc26xx_flags2mask(unsigned int flags, unsigned int bitpos) return bit ? (1 << (bit - 1)) : 0; } -static void __devinit sc26xx_init_masks(struct uart_sc26xx_port *up, +static void sc26xx_init_masks(struct uart_sc26xx_port *up, int line, unsigned int data) { up->dtr_mask[line] = sc26xx_flags2mask(data, 0); @@ -632,7 +632,7 @@ static void __devinit sc26xx_init_masks(struct uart_sc26xx_port *up, up->ri_mask[line] = sc26xx_flags2mask(data, 20); } -static int __devinit sc26xx_probe(struct platform_device *dev) +static int sc26xx_probe(struct platform_device *dev) { struct resource *res; struct uart_sc26xx_port *up; @@ -733,7 +733,7 @@ static int __exit sc26xx_driver_remove(struct platform_device *dev) static struct platform_driver sc26xx_driver = { .probe = sc26xx_probe, - .remove = __devexit_p(sc26xx_driver_remove), + .remove = sc26xx_driver_remove, .driver = { .name = "SC26xx", .owner = THIS_MODULE, diff --git a/drivers/tty/serial/sccnxp.c b/drivers/tty/serial/sccnxp.c index e821068cd95..418b495e323 100644 --- a/drivers/tty/serial/sccnxp.c +++ b/drivers/tty/serial/sccnxp.c @@ -740,7 +740,7 @@ static int sccnxp_console_setup(struct console *co, char *options) } #endif -static int __devinit sccnxp_probe(struct platform_device *pdev) +static int sccnxp_probe(struct platform_device *pdev) { struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); int chiptype = pdev->id_entry->driver_data; @@ -943,7 +943,7 @@ err_out: return ret; } -static int __devexit sccnxp_remove(struct platform_device *pdev) +static int sccnxp_remove(struct platform_device *pdev) { int i; struct sccnxp_port *s = platform_get_drvdata(pdev); @@ -981,7 +981,7 @@ static struct platform_driver sccnxp_uart_driver = { .owner = THIS_MODULE, }, .probe = sccnxp_probe, - .remove = __devexit_p(sccnxp_remove), + .remove = sccnxp_remove, .id_table = sccnxp_id_table, }; module_platform_driver(sccnxp_uart_driver); diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 0fcfd98a956..fb5aa42fde7 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -634,10 +634,10 @@ static void uart_unthrottle(struct tty_struct *tty) uart_set_mctrl(port, TIOCM_RTS); } -static void uart_get_info(struct tty_port *port, - struct uart_state *state, +static void do_uart_get_info(struct tty_port *port, struct serial_struct *retinfo) { + struct uart_state *state = container_of(port, struct uart_state, port); struct uart_port *uport = state->uart_port; memset(retinfo, 0, sizeof(*retinfo)); @@ -662,17 +662,21 @@ static void uart_get_info(struct tty_port *port, retinfo->iomem_base = (void *)(unsigned long)uport->mapbase; } -static int uart_get_info_user(struct uart_state *state, - struct serial_struct __user *retinfo) +static void uart_get_info(struct tty_port *port, + struct serial_struct *retinfo) { - struct tty_port *port = &state->port; - struct serial_struct tmp; - /* Ensure the state we copy is consistent and no hardware changes occur as we go */ mutex_lock(&port->mutex); - uart_get_info(port, state, &tmp); + do_uart_get_info(port, retinfo); mutex_unlock(&port->mutex); +} + +static int uart_get_info_user(struct tty_port *port, + struct serial_struct __user *retinfo) +{ + struct serial_struct tmp; + uart_get_info(port, &tmp); if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) return -EFAULT; @@ -1131,7 +1135,7 @@ uart_ioctl(struct tty_struct *tty, unsigned int cmd, */ switch (cmd) { case TIOCGSERIAL: - ret = uart_get_info_user(state, uarg); + ret = uart_get_info_user(port, uarg); break; case TIOCSSERIAL: @@ -2293,6 +2297,8 @@ int uart_register_driver(struct uart_driver *drv) if (retval >= 0) return retval; + for (i = 0; i < drv->nr; i++) + tty_port_destroy(&drv->state[i].port); put_tty_driver(normal); out_kfree: kfree(drv->state); @@ -2312,8 +2318,12 @@ out: void uart_unregister_driver(struct uart_driver *drv) { struct tty_driver *p = drv->tty_driver; + unsigned int i; + tty_unregister_driver(p); put_tty_driver(p); + for (i = 0; i < drv->nr; i++) + tty_port_destroy(&drv->state[i].port); kfree(drv->state); drv->state = NULL; drv->tty_driver = NULL; @@ -2329,21 +2339,166 @@ struct tty_driver *uart_console_device(struct console *co, int *index) static ssize_t uart_get_attr_uartclk(struct device *dev, struct device_attribute *attr, char *buf) { - int ret; + struct serial_struct tmp; struct tty_port *port = dev_get_drvdata(dev); - struct uart_state *state = container_of(port, struct uart_state, port); - mutex_lock(&state->port.mutex); - ret = snprintf(buf, PAGE_SIZE, "%d\n", state->uart_port->uartclk); - mutex_unlock(&state->port.mutex); + uart_get_info(port, &tmp); + return snprintf(buf, PAGE_SIZE, "%d\n", tmp.baud_base * 16); +} - return ret; +static ssize_t uart_get_attr_type(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct serial_struct tmp; + struct tty_port *port = dev_get_drvdata(dev); + + uart_get_info(port, &tmp); + return snprintf(buf, PAGE_SIZE, "%d\n", tmp.type); +} +static ssize_t uart_get_attr_line(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct serial_struct tmp; + struct tty_port *port = dev_get_drvdata(dev); + + uart_get_info(port, &tmp); + return snprintf(buf, PAGE_SIZE, "%d\n", tmp.line); +} + +static ssize_t uart_get_attr_port(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct serial_struct tmp; + struct tty_port *port = dev_get_drvdata(dev); + unsigned long ioaddr; + + uart_get_info(port, &tmp); + ioaddr = tmp.port; + if (HIGH_BITS_OFFSET) + ioaddr |= (unsigned long)tmp.port_high << HIGH_BITS_OFFSET; + return snprintf(buf, PAGE_SIZE, "0x%lX\n", ioaddr); } +static ssize_t uart_get_attr_irq(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct serial_struct tmp; + struct tty_port *port = dev_get_drvdata(dev); + + uart_get_info(port, &tmp); + return snprintf(buf, PAGE_SIZE, "%d\n", tmp.irq); +} + +static ssize_t uart_get_attr_flags(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct serial_struct tmp; + struct tty_port *port = dev_get_drvdata(dev); + + uart_get_info(port, &tmp); + return snprintf(buf, PAGE_SIZE, "0x%X\n", tmp.flags); +} + +static ssize_t uart_get_attr_xmit_fifo_size(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct serial_struct tmp; + struct tty_port *port = dev_get_drvdata(dev); + + uart_get_info(port, &tmp); + return snprintf(buf, PAGE_SIZE, "%d\n", tmp.xmit_fifo_size); +} + + +static ssize_t uart_get_attr_close_delay(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct serial_struct tmp; + struct tty_port *port = dev_get_drvdata(dev); + + uart_get_info(port, &tmp); + return snprintf(buf, PAGE_SIZE, "%d\n", tmp.close_delay); +} + + +static ssize_t uart_get_attr_closing_wait(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct serial_struct tmp; + struct tty_port *port = dev_get_drvdata(dev); + + uart_get_info(port, &tmp); + return snprintf(buf, PAGE_SIZE, "%d\n", tmp.closing_wait); +} + +static ssize_t uart_get_attr_custom_divisor(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct serial_struct tmp; + struct tty_port *port = dev_get_drvdata(dev); + + uart_get_info(port, &tmp); + return snprintf(buf, PAGE_SIZE, "%d\n", tmp.custom_divisor); +} + +static ssize_t uart_get_attr_io_type(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct serial_struct tmp; + struct tty_port *port = dev_get_drvdata(dev); + + uart_get_info(port, &tmp); + return snprintf(buf, PAGE_SIZE, "%d\n", tmp.io_type); +} + +static ssize_t uart_get_attr_iomem_base(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct serial_struct tmp; + struct tty_port *port = dev_get_drvdata(dev); + + uart_get_info(port, &tmp); + return snprintf(buf, PAGE_SIZE, "0x%lX\n", (unsigned long)tmp.iomem_base); +} + +static ssize_t uart_get_attr_iomem_reg_shift(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct serial_struct tmp; + struct tty_port *port = dev_get_drvdata(dev); + + uart_get_info(port, &tmp); + return snprintf(buf, PAGE_SIZE, "%d\n", tmp.iomem_reg_shift); +} + +static DEVICE_ATTR(type, S_IRUSR | S_IRGRP, uart_get_attr_type, NULL); +static DEVICE_ATTR(line, S_IRUSR | S_IRGRP, uart_get_attr_line, NULL); +static DEVICE_ATTR(port, S_IRUSR | S_IRGRP, uart_get_attr_port, NULL); +static DEVICE_ATTR(irq, S_IRUSR | S_IRGRP, uart_get_attr_irq, NULL); +static DEVICE_ATTR(flags, S_IRUSR | S_IRGRP, uart_get_attr_flags, NULL); +static DEVICE_ATTR(xmit_fifo_size, S_IRUSR | S_IRGRP, uart_get_attr_xmit_fifo_size, NULL); static DEVICE_ATTR(uartclk, S_IRUSR | S_IRGRP, uart_get_attr_uartclk, NULL); +static DEVICE_ATTR(close_delay, S_IRUSR | S_IRGRP, uart_get_attr_close_delay, NULL); +static DEVICE_ATTR(closing_wait, S_IRUSR | S_IRGRP, uart_get_attr_closing_wait, NULL); +static DEVICE_ATTR(custom_divisor, S_IRUSR | S_IRGRP, uart_get_attr_custom_divisor, NULL); +static DEVICE_ATTR(io_type, S_IRUSR | S_IRGRP, uart_get_attr_io_type, NULL); +static DEVICE_ATTR(iomem_base, S_IRUSR | S_IRGRP, uart_get_attr_iomem_base, NULL); +static DEVICE_ATTR(iomem_reg_shift, S_IRUSR | S_IRGRP, uart_get_attr_iomem_reg_shift, NULL); static struct attribute *tty_dev_attrs[] = { + &dev_attr_type.attr, + &dev_attr_line.attr, + &dev_attr_port.attr, + &dev_attr_irq.attr, + &dev_attr_flags.attr, + &dev_attr_xmit_fifo_size.attr, &dev_attr_uartclk.attr, + &dev_attr_close_delay.attr, + &dev_attr_closing_wait.attr, + &dev_attr_custom_divisor.attr, + &dev_attr_io_type.attr, + &dev_attr_iomem_base.attr, + &dev_attr_iomem_reg_shift.attr, NULL, }; @@ -2356,6 +2511,7 @@ static const struct attribute_group *tty_dev_attr_groups[] = { NULL }; + /** * uart_add_one_port - attach a driver-defined port structure * @drv: pointer to the uart low level driver structure for this port diff --git a/drivers/tty/serial/serial_txx9.c b/drivers/tty/serial/serial_txx9.c index 6ae2a58d62f..b52b21aeb25 100644 --- a/drivers/tty/serial/serial_txx9.c +++ b/drivers/tty/serial/serial_txx9.c @@ -1030,7 +1030,7 @@ static DEFINE_MUTEX(serial_txx9_mutex); * * On success the port is ready to use and the line number is returned. */ -static int __devinit serial_txx9_register_port(struct uart_port *port) +static int serial_txx9_register_port(struct uart_port *port) { int i; struct uart_txx9_port *uart; @@ -1078,7 +1078,7 @@ static int __devinit serial_txx9_register_port(struct uart_port *port) * Remove one serial port. This may not be called from interrupt * context. We hand the port back to the our control. */ -static void __devexit serial_txx9_unregister_port(int line) +static void serial_txx9_unregister_port(int line) { struct uart_txx9_port *uart = &serial_txx9_ports[line]; @@ -1096,7 +1096,7 @@ static void __devexit serial_txx9_unregister_port(int line) /* * Register a set of serial devices attached to a platform device. */ -static int __devinit serial_txx9_probe(struct platform_device *dev) +static int serial_txx9_probe(struct platform_device *dev) { struct uart_port *p = dev->dev.platform_data; struct uart_port port; @@ -1126,7 +1126,7 @@ static int __devinit serial_txx9_probe(struct platform_device *dev) /* * Remove serial ports registered against a platform device. */ -static int __devexit serial_txx9_remove(struct platform_device *dev) +static int serial_txx9_remove(struct platform_device *dev) { int i; @@ -1171,7 +1171,7 @@ static int serial_txx9_resume(struct platform_device *dev) static struct platform_driver serial_txx9_plat_driver = { .probe = serial_txx9_probe, - .remove = __devexit_p(serial_txx9_remove), + .remove = serial_txx9_remove, #ifdef CONFIG_PM .suspend = serial_txx9_suspend, .resume = serial_txx9_resume, @@ -1187,7 +1187,7 @@ static struct platform_driver serial_txx9_plat_driver = { * Probe one serial board. Unfortunately, there is no rhyme nor reason * to the arrangement of serial ports on a PCI card. */ -static int __devinit +static int pciserial_txx9_init_one(struct pci_dev *dev, const struct pci_device_id *ent) { struct uart_port port; @@ -1217,7 +1217,7 @@ pciserial_txx9_init_one(struct pci_dev *dev, const struct pci_device_id *ent) return 0; } -static void __devexit pciserial_txx9_remove_one(struct pci_dev *dev) +static void pciserial_txx9_remove_one(struct pci_dev *dev) { struct uart_txx9_port *up = pci_get_drvdata(dev); @@ -1261,7 +1261,7 @@ static const struct pci_device_id serial_txx9_pci_tbl[] = { static struct pci_driver serial_txx9_pci_driver = { .name = "serial_txx9", .probe = pciserial_txx9_init_one, - .remove = __devexit_p(pciserial_txx9_remove_one), + .remove = pciserial_txx9_remove_one, #ifdef CONFIG_PM .suspend = pciserial_txx9_suspend_one, .resume = pciserial_txx9_resume_one, diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 6ee59001d61..61477567423 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -99,12 +99,6 @@ struct sci_port { #endif struct notifier_block freq_transition; - -#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE - unsigned short saved_smr; - unsigned short saved_fcr; - unsigned char saved_brr; -#endif }; /* Function prototypes */ @@ -202,9 +196,9 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = { [SCxSR] = { 0x14, 16 }, [SCxRDR] = { 0x60, 8 }, [SCFCR] = { 0x18, 16 }, - [SCFDR] = { 0x1c, 16 }, - [SCTFDR] = sci_reg_invalid, - [SCRFDR] = sci_reg_invalid, + [SCFDR] = sci_reg_invalid, + [SCTFDR] = { 0x38, 16 }, + [SCRFDR] = { 0x3c, 16 }, [SCSPTR] = sci_reg_invalid, [SCLSR] = sci_reg_invalid, }, @@ -491,7 +485,7 @@ static int sci_txfill(struct uart_port *port) reg = sci_getreg(port, SCTFDR); if (reg->size) - return serial_port_in(port, SCTFDR) & 0xff; + return serial_port_in(port, SCTFDR) & ((port->fifosize << 1) - 1); reg = sci_getreg(port, SCFDR); if (reg->size) @@ -511,7 +505,7 @@ static int sci_rxfill(struct uart_port *port) reg = sci_getreg(port, SCRFDR); if (reg->size) - return serial_port_in(port, SCRFDR) & 0xff; + return serial_port_in(port, SCRFDR) & ((port->fifosize << 1) - 1); reg = sci_getreg(port, SCFDR); if (reg->size) @@ -1132,7 +1126,7 @@ static const char *sci_gpio_str(unsigned int index) return sci_gpio_names[index]; } -static void __devinit sci_init_gpios(struct sci_port *port) +static void sci_init_gpios(struct sci_port *port) { struct uart_port *up = &port->port; int i; @@ -1749,22 +1743,21 @@ static inline void sci_free_dma(struct uart_port *port) static int sci_startup(struct uart_port *port) { struct sci_port *s = to_sci_port(port); + unsigned long flags; int ret; dev_dbg(port->dev, "%s(%d)\n", __func__, port->line); - pm_runtime_put_noidle(port->dev); - - sci_port_enable(s); - ret = sci_request_irq(s); if (unlikely(ret < 0)) return ret; sci_request_dma(port); + spin_lock_irqsave(&port->lock, flags); sci_start_tx(port); sci_start_rx(port); + spin_unlock_irqrestore(&port->lock, flags); return 0; } @@ -1772,18 +1765,17 @@ static int sci_startup(struct uart_port *port) static void sci_shutdown(struct uart_port *port) { struct sci_port *s = to_sci_port(port); + unsigned long flags; dev_dbg(port->dev, "%s(%d)\n", __func__, port->line); + spin_lock_irqsave(&port->lock, flags); sci_stop_rx(port); sci_stop_tx(port); + spin_unlock_irqrestore(&port->lock, flags); sci_free_dma(port); sci_free_irq(s); - - sci_port_disable(s); - - pm_runtime_get_noresume(port->dev); } static unsigned int sci_scbrr_calc(unsigned int algo_id, unsigned int bps, @@ -1829,7 +1821,7 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios, { struct sci_port *s = to_sci_port(port); struct plat_sci_reg *reg; - unsigned int baud, smr_val, max_baud; + unsigned int baud, smr_val, max_baud, cks; int t = -1; /* @@ -1863,21 +1855,18 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios, uart_update_timeout(port, termios->c_cflag, baud); - serial_port_out(port, SCSMR, smr_val); - - dev_dbg(port->dev, "%s: SMR %x, t %x, SCSCR %x\n", __func__, smr_val, t, - s->cfg->scscr); + for (cks = 0; t >= 256 && cks <= 3; cks++) + t >>= 2; - if (t > 0) { - if (t >= 256) { - serial_port_out(port, SCSMR, (serial_port_in(port, SCSMR) & ~3) | 1); - t >>= 2; - } else - serial_port_out(port, SCSMR, serial_port_in(port, SCSMR) & ~3); + dev_dbg(port->dev, "%s: SMR %x, cks %x, t %x, SCSCR %x\n", + __func__, smr_val, cks, t, s->cfg->scscr); + if (t >= 0) { + serial_port_out(port, SCSMR, (smr_val & ~3) | cks); serial_port_out(port, SCBRR, t); udelay((1000000+(baud-1)) / baud); /* Wait one bit interval */ - } + } else + serial_port_out(port, SCSMR, smr_val); sci_init_pins(port, termios->c_cflag); @@ -1932,6 +1921,21 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios, sci_port_disable(s); } +static void sci_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ + struct sci_port *sci_port = to_sci_port(port); + + switch (state) { + case 3: + sci_port_disable(sci_port); + break; + default: + sci_port_enable(sci_port); + break; + } +} + static const char *sci_type(struct uart_port *port) { switch (port->type) { @@ -2053,6 +2057,7 @@ static struct uart_ops sci_uart_ops = { .startup = sci_startup, .shutdown = sci_shutdown, .set_termios = sci_set_termios, + .pm = sci_pm, .type = sci_type, .release_port = sci_release_port, .request_port = sci_request_port, @@ -2064,7 +2069,7 @@ static struct uart_ops sci_uart_ops = { #endif }; -static int __devinit sci_init_single(struct platform_device *dev, +static int sci_init_single(struct platform_device *dev, struct sci_port *sci_port, unsigned int index, struct plat_sci_port *p) @@ -2121,8 +2126,6 @@ static int __devinit sci_init_single(struct platform_device *dev, sci_init_gpios(sci_port); - pm_runtime_irq_safe(&dev->dev); - pm_runtime_get_noresume(&dev->dev); pm_runtime_enable(&dev->dev); } @@ -2206,9 +2209,21 @@ static void serial_console_write(struct console *co, const char *s, { struct sci_port *sci_port = &sci_ports[co->index]; struct uart_port *port = &sci_port->port; - unsigned short bits; + unsigned short bits, ctrl; + unsigned long flags; + int locked = 1; + + local_irq_save(flags); + if (port->sysrq) + locked = 0; + else if (oops_in_progress) + locked = spin_trylock(&port->lock); + else + spin_lock(&port->lock); - sci_port_enable(sci_port); + /* first save the SCSCR then disable the interrupts */ + ctrl = serial_port_in(port, SCSCR); + serial_port_out(port, SCSCR, sci_port->cfg->scscr); uart_console_write(port, s, count, serial_console_putchar); @@ -2217,10 +2232,15 @@ static void serial_console_write(struct console *co, const char *s, while ((serial_port_in(port, SCxSR) & bits) != bits) cpu_relax(); - sci_port_disable(sci_port); + /* restore the SCSCR */ + serial_port_out(port, SCSCR, ctrl); + + if (locked) + spin_unlock(&port->lock); + local_irq_restore(flags); } -static int __devinit serial_console_setup(struct console *co, char *options) +static int serial_console_setup(struct console *co, char *options) { struct sci_port *sci_port; struct uart_port *port; @@ -2249,13 +2269,9 @@ static int __devinit serial_console_setup(struct console *co, char *options) if (unlikely(ret != 0)) return ret; - sci_port_enable(sci_port); - if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); - sci_port_disable(sci_port); - return uart_set_options(port, co, baud, parity, bits, flow); } @@ -2278,7 +2294,7 @@ static struct console early_serial_console = { static char early_serial_buf[32]; -static int __devinit sci_probe_earlyprintk(struct platform_device *pdev) +static int sci_probe_earlyprintk(struct platform_device *pdev) { struct plat_sci_port *cfg = pdev->dev.platform_data; @@ -2298,57 +2314,15 @@ static int __devinit sci_probe_earlyprintk(struct platform_device *pdev) return 0; } -#define uart_console(port) ((port)->cons->index == (port)->line) - -static int sci_runtime_suspend(struct device *dev) -{ - struct sci_port *sci_port = dev_get_drvdata(dev); - struct uart_port *port = &sci_port->port; - - if (uart_console(port)) { - struct plat_sci_reg *reg; - - sci_port->saved_smr = serial_port_in(port, SCSMR); - sci_port->saved_brr = serial_port_in(port, SCBRR); - - reg = sci_getreg(port, SCFCR); - if (reg->size) - sci_port->saved_fcr = serial_port_in(port, SCFCR); - else - sci_port->saved_fcr = 0; - } - return 0; -} - -static int sci_runtime_resume(struct device *dev) -{ - struct sci_port *sci_port = dev_get_drvdata(dev); - struct uart_port *port = &sci_port->port; - - if (uart_console(port)) { - sci_reset(port); - serial_port_out(port, SCSMR, sci_port->saved_smr); - serial_port_out(port, SCBRR, sci_port->saved_brr); - - if (sci_port->saved_fcr) - serial_port_out(port, SCFCR, sci_port->saved_fcr); - - serial_port_out(port, SCSCR, sci_port->cfg->scscr); - } - return 0; -} - #define SCI_CONSOLE (&serial_console) #else -static inline int __devinit sci_probe_earlyprintk(struct platform_device *pdev) +static inline int sci_probe_earlyprintk(struct platform_device *pdev) { return -EINVAL; } #define SCI_CONSOLE NULL -#define sci_runtime_suspend NULL -#define sci_runtime_resume NULL #endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */ @@ -2379,7 +2353,7 @@ static int sci_remove(struct platform_device *dev) return 0; } -static int __devinit sci_probe_single(struct platform_device *dev, +static int sci_probe_single(struct platform_device *dev, unsigned int index, struct plat_sci_port *p, struct sci_port *sciport) @@ -2409,7 +2383,7 @@ static int __devinit sci_probe_single(struct platform_device *dev, return 0; } -static int __devinit sci_probe(struct platform_device *dev) +static int sci_probe(struct platform_device *dev) { struct plat_sci_port *p = dev->dev.platform_data; struct sci_port *sp = &sci_ports[dev->id]; @@ -2466,8 +2440,6 @@ static int sci_resume(struct device *dev) } static const struct dev_pm_ops sci_dev_pm_ops = { - .runtime_suspend = sci_runtime_suspend, - .runtime_resume = sci_runtime_resume, .suspend = sci_suspend, .resume = sci_resume, }; diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c index a9e2bd1ab53..5da5cb96276 100644 --- a/drivers/tty/serial/sirfsoc_uart.c +++ b/drivers/tty/serial/sirfsoc_uart.c @@ -727,7 +727,7 @@ static int sirfsoc_uart_resume(struct platform_device *pdev) return 0; } -static struct of_device_id sirfsoc_uart_ids[] __devinitdata = { +static struct of_device_id sirfsoc_uart_ids[] = { { .compatible = "sirf,prima2-uart", }, {} }; @@ -735,7 +735,7 @@ MODULE_DEVICE_TABLE(of, sirfsoc_serial_of_match); static struct platform_driver sirfsoc_uart_driver = { .probe = sirfsoc_uart_probe, - .remove = __devexit_p(sirfsoc_uart_remove), + .remove = sirfsoc_uart_remove, .suspend = sirfsoc_uart_suspend, .resume = sirfsoc_uart_resume, .driver = { diff --git a/drivers/tty/serial/sunhv.c b/drivers/tty/serial/sunhv.c index 505961cfd93..b9bf9c53f7f 100644 --- a/drivers/tty/serial/sunhv.c +++ b/drivers/tty/serial/sunhv.c @@ -519,7 +519,7 @@ static struct console sunhv_console = { .data = &sunhv_reg, }; -static int __devinit hv_probe(struct platform_device *op) +static int hv_probe(struct platform_device *op) { struct uart_port *port; unsigned long minor; @@ -598,7 +598,7 @@ out_free_port: return err; } -static int __devexit hv_remove(struct platform_device *dev) +static int hv_remove(struct platform_device *dev) { struct uart_port *port = dev_get_drvdata(&dev->dev); @@ -636,7 +636,7 @@ static struct platform_driver hv_driver = { .of_match_table = hv_match, }, .probe = hv_probe, - .remove = __devexit_p(hv_remove), + .remove = hv_remove, }; static int __init sunhv_init(void) diff --git a/drivers/tty/serial/sunsab.c b/drivers/tty/serial/sunsab.c index f0d93eb7e6e..bd8b3b63410 100644 --- a/drivers/tty/serial/sunsab.c +++ b/drivers/tty/serial/sunsab.c @@ -954,7 +954,7 @@ static inline struct console *SUNSAB_CONSOLE(void) #define sunsab_console_init() do { } while (0) #endif -static int __devinit sunsab_init_one(struct uart_sunsab_port *up, +static int sunsab_init_one(struct uart_sunsab_port *up, struct platform_device *op, unsigned long offset, int line) @@ -1007,7 +1007,7 @@ static int __devinit sunsab_init_one(struct uart_sunsab_port *up, return 0; } -static int __devinit sab_probe(struct platform_device *op) +static int sab_probe(struct platform_device *op) { static int inst; struct uart_sunsab_port *up; @@ -1063,7 +1063,7 @@ out: return err; } -static int __devexit sab_remove(struct platform_device *op) +static int sab_remove(struct platform_device *op) { struct uart_sunsab_port *up = dev_get_drvdata(&op->dev); @@ -1100,7 +1100,7 @@ static struct platform_driver sab_driver = { .of_match_table = sab_match, }, .probe = sab_probe, - .remove = __devexit_p(sab_remove), + .remove = sab_remove, }; static int __init sunsab_init(void) diff --git a/drivers/tty/serial/sunsu.c b/drivers/tty/serial/sunsu.c index b97913dcdbf..220da3f9724 100644 --- a/drivers/tty/serial/sunsu.c +++ b/drivers/tty/serial/sunsu.c @@ -1185,7 +1185,7 @@ static struct uart_driver sunsu_reg = { .major = TTY_MAJOR, }; -static int __devinit sunsu_kbd_ms_init(struct uart_sunsu_port *up) +static int sunsu_kbd_ms_init(struct uart_sunsu_port *up) { int quot, baud; #ifdef CONFIG_SERIO @@ -1391,7 +1391,7 @@ static inline struct console *SUNSU_CONSOLE(void) #define sunsu_serial_console_init() do { } while (0) #endif -static enum su_type __devinit su_get_type(struct device_node *dp) +static enum su_type su_get_type(struct device_node *dp) { struct device_node *ap = of_find_node_by_path("/aliases"); @@ -1412,7 +1412,7 @@ static enum su_type __devinit su_get_type(struct device_node *dp) return SU_PORT_PORT; } -static int __devinit su_probe(struct platform_device *op) +static int su_probe(struct platform_device *op) { static int inst; struct device_node *dp = op->dev.of_node; @@ -1503,7 +1503,7 @@ out_unmap: return err; } -static int __devexit su_remove(struct platform_device *op) +static int su_remove(struct platform_device *op) { struct uart_sunsu_port *up = dev_get_drvdata(&op->dev); bool kbdms = false; @@ -1556,7 +1556,7 @@ static struct platform_driver su_driver = { .of_match_table = su_match, }, .probe = su_probe, - .remove = __devexit_p(su_remove), + .remove = su_remove, }; static int __init sunsu_init(void) diff --git a/drivers/tty/serial/sunzilog.c b/drivers/tty/serial/sunzilog.c index babd9470982..aef4fab957c 100644 --- a/drivers/tty/serial/sunzilog.c +++ b/drivers/tty/serial/sunzilog.c @@ -1282,7 +1282,7 @@ static inline struct console *SUNZILOG_CONSOLE(void) #define SUNZILOG_CONSOLE() (NULL) #endif -static void __devinit sunzilog_init_kbdms(struct uart_sunzilog_port *up) +static void sunzilog_init_kbdms(struct uart_sunzilog_port *up) { int baud, brg; @@ -1302,7 +1302,7 @@ static void __devinit sunzilog_init_kbdms(struct uart_sunzilog_port *up) } #ifdef CONFIG_SERIO -static void __devinit sunzilog_register_serio(struct uart_sunzilog_port *up) +static void sunzilog_register_serio(struct uart_sunzilog_port *up) { struct serio *serio = &up->serio; @@ -1331,7 +1331,7 @@ static void __devinit sunzilog_register_serio(struct uart_sunzilog_port *up) } #endif -static void __devinit sunzilog_init_hw(struct uart_sunzilog_port *up) +static void sunzilog_init_hw(struct uart_sunzilog_port *up) { struct zilog_channel __iomem *channel; unsigned long flags; @@ -1400,7 +1400,7 @@ static void __devinit sunzilog_init_hw(struct uart_sunzilog_port *up) static int zilog_irq; -static int __devinit zs_probe(struct platform_device *op) +static int zs_probe(struct platform_device *op) { static int kbm_inst, uart_inst; int inst; @@ -1507,7 +1507,7 @@ static int __devinit zs_probe(struct platform_device *op) return 0; } -static void __devexit zs_remove_one(struct uart_sunzilog_port *up) +static void zs_remove_one(struct uart_sunzilog_port *up) { if (ZS_IS_KEYB(up) || ZS_IS_MOUSE(up)) { #ifdef CONFIG_SERIO @@ -1517,7 +1517,7 @@ static void __devexit zs_remove_one(struct uart_sunzilog_port *up) uart_remove_one_port(&sunzilog_reg, &up->port); } -static int __devexit zs_remove(struct platform_device *op) +static int zs_remove(struct platform_device *op) { struct uart_sunzilog_port *up = dev_get_drvdata(&op->dev); struct zilog_layout __iomem *regs; @@ -1548,7 +1548,7 @@ static struct platform_driver zs_driver = { .of_match_table = zs_match, }, .probe = zs_probe, - .remove = __devexit_p(zs_remove), + .remove = zs_remove, }; static int __init sunzilog_init(void) diff --git a/drivers/tty/serial/timbuart.c b/drivers/tty/serial/timbuart.c index 70f97491d8f..5be0d68fece 100644 --- a/drivers/tty/serial/timbuart.c +++ b/drivers/tty/serial/timbuart.c @@ -426,7 +426,7 @@ static struct uart_driver timbuart_driver = { .nr = 1 }; -static int __devinit timbuart_probe(struct platform_device *dev) +static int timbuart_probe(struct platform_device *dev) { int err, irq; struct timbuart_port *uart; @@ -492,7 +492,7 @@ err_mem: return err; } -static int __devexit timbuart_remove(struct platform_device *dev) +static int timbuart_remove(struct platform_device *dev) { struct timbuart_port *uart = platform_get_drvdata(dev); @@ -510,7 +510,7 @@ static struct platform_driver timbuart_platform_driver = { .owner = THIS_MODULE, }, .probe = timbuart_probe, - .remove = __devexit_p(timbuart_remove), + .remove = timbuart_remove, }; module_platform_driver(timbuart_platform_driver); diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c index 6579ffdd8e9..89eee43c4e2 100644 --- a/drivers/tty/serial/uartlite.c +++ b/drivers/tty/serial/uartlite.c @@ -408,7 +408,7 @@ static void ulite_console_write(struct console *co, const char *s, spin_unlock_irqrestore(&port->lock, flags); } -static int __devinit ulite_console_setup(struct console *co, char *options) +static int ulite_console_setup(struct console *co, char *options) { struct uart_port *port; int baud = 9600; @@ -486,7 +486,7 @@ static struct uart_driver ulite_uart_driver = { * * Returns: 0 on success, <0 otherwise */ -static int __devinit ulite_assign(struct device *dev, int id, u32 base, int irq) +static int ulite_assign(struct device *dev, int id, u32 base, int irq) { struct uart_port *port; int rc; @@ -542,7 +542,7 @@ static int __devinit ulite_assign(struct device *dev, int id, u32 base, int irq) * * @dev: pointer to device structure */ -static int __devexit ulite_release(struct device *dev) +static int ulite_release(struct device *dev) { struct uart_port *port = dev_get_drvdata(dev); int rc = 0; @@ -562,7 +562,7 @@ static int __devexit ulite_release(struct device *dev) #if defined(CONFIG_OF) /* Match table for of_platform binding */ -static struct of_device_id ulite_of_match[] __devinitdata = { +static struct of_device_id ulite_of_match[] = { { .compatible = "xlnx,opb-uartlite-1.00.b", }, { .compatible = "xlnx,xps-uartlite-1.00.a", }, {} @@ -570,7 +570,7 @@ static struct of_device_id ulite_of_match[] __devinitdata = { MODULE_DEVICE_TABLE(of, ulite_of_match); #endif /* CONFIG_OF */ -static int __devinit ulite_probe(struct platform_device *pdev) +static int ulite_probe(struct platform_device *pdev) { struct resource *res, *res2; int id = pdev->id; @@ -593,7 +593,7 @@ static int __devinit ulite_probe(struct platform_device *pdev) return ulite_assign(&pdev->dev, id, res->start, res2->start); } -static int __devexit ulite_remove(struct platform_device *pdev) +static int ulite_remove(struct platform_device *pdev) { return ulite_release(&pdev->dev); } @@ -603,7 +603,7 @@ MODULE_ALIAS("platform:uartlite"); static struct platform_driver ulite_platform_driver = { .probe = ulite_probe, - .remove = __devexit_p(ulite_remove), + .remove = ulite_remove, .driver = { .owner = THIS_MODULE, .name = "uartlite", diff --git a/drivers/tty/serial/vr41xx_siu.c b/drivers/tty/serial/vr41xx_siu.c index cf0d9485ec0..62ee0166bc6 100644 --- a/drivers/tty/serial/vr41xx_siu.c +++ b/drivers/tty/serial/vr41xx_siu.c @@ -823,7 +823,7 @@ static struct console siu_console = { .data = &siu_uart_driver, }; -static int __devinit siu_console_init(void) +static int siu_console_init(void) { struct uart_port *port; int i; @@ -867,7 +867,7 @@ static struct uart_driver siu_uart_driver = { .cons = SERIAL_VR41XX_CONSOLE, }; -static int __devinit siu_probe(struct platform_device *dev) +static int siu_probe(struct platform_device *dev) { struct uart_port *port; int num, i, retval; @@ -901,7 +901,7 @@ static int __devinit siu_probe(struct platform_device *dev) return 0; } -static int __devexit siu_remove(struct platform_device *dev) +static int siu_remove(struct platform_device *dev) { struct uart_port *port; int i; @@ -952,7 +952,7 @@ static int siu_resume(struct platform_device *dev) static struct platform_driver siu_device_driver = { .probe = siu_probe, - .remove = __devexit_p(siu_remove), + .remove = siu_remove, .suspend = siu_suspend, .resume = siu_resume, .driver = { diff --git a/drivers/tty/serial/vt8500_serial.c b/drivers/tty/serial/vt8500_serial.c index 205d4cf4a06..8fd181436a6 100644 --- a/drivers/tty/serial/vt8500_serial.c +++ b/drivers/tty/serial/vt8500_serial.c @@ -554,7 +554,7 @@ static struct uart_driver vt8500_uart_driver = { .cons = VT8500_CONSOLE, }; -static int __devinit vt8500_serial_probe(struct platform_device *pdev) +static int vt8500_serial_probe(struct platform_device *pdev) { struct vt8500_port *vt8500_port; struct resource *mmres, *irqres; @@ -567,10 +567,6 @@ static int __devinit vt8500_serial_probe(struct platform_device *pdev) if (!mmres || !irqres) return -ENODEV; - vt8500_port = kzalloc(sizeof(struct vt8500_port), GFP_KERNEL); - if (!vt8500_port) - return -ENOMEM; - if (np) port = of_alias_get_id(np, "serial"); if (port > VT8500_MAX_PORTS) @@ -593,6 +589,10 @@ static int __devinit vt8500_serial_probe(struct platform_device *pdev) return -EBUSY; } + vt8500_port = kzalloc(sizeof(struct vt8500_port), GFP_KERNEL); + if (!vt8500_port) + return -ENOMEM; + vt8500_port->uart.type = PORT_VT8500; vt8500_port->uart.iotype = UPIO_MEM; vt8500_port->uart.mapbase = mmres->start; @@ -634,7 +634,7 @@ err: return ret; } -static int __devexit vt8500_serial_remove(struct platform_device *pdev) +static int vt8500_serial_remove(struct platform_device *pdev) { struct vt8500_port *vt8500_port = platform_get_drvdata(pdev); @@ -652,7 +652,7 @@ static const struct of_device_id wmt_dt_ids[] = { static struct platform_driver vt8500_platform_driver = { .probe = vt8500_serial_probe, - .remove = __devexit_p(vt8500_serial_remove), + .remove = vt8500_serial_remove, .driver = { .name = "vt8500_serial", .owner = THIS_MODULE, diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c index b627363352e..9ab910370c5 100644 --- a/drivers/tty/serial/xilinx_uartps.c +++ b/drivers/tty/serial/xilinx_uartps.c @@ -939,22 +939,18 @@ static struct uart_driver xuartps_uart_driver = { * * Returns 0 on success, negative error otherwise **/ -static int __devinit xuartps_probe(struct platform_device *pdev) +static int xuartps_probe(struct platform_device *pdev) { int rc; struct uart_port *port; struct resource *res, *res2; int clk = 0; -#ifdef CONFIG_OF const unsigned int *prop; prop = of_get_property(pdev->dev.of_node, "clock", NULL); if (prop) clk = be32_to_cpup(prop); -#else - clk = *((unsigned int *)(pdev->dev.platform_data)); -#endif if (!clk) { dev_err(&pdev->dev, "no clock specified\n"); return -ENODEV; @@ -1001,7 +997,7 @@ static int __devinit xuartps_probe(struct platform_device *pdev) * * Returns 0 on success, negative error otherwise **/ -static int __devexit xuartps_remove(struct platform_device *pdev) +static int xuartps_remove(struct platform_device *pdev) { struct uart_port *port = dev_get_drvdata(&pdev->dev); int rc = 0; @@ -1044,16 +1040,11 @@ static int xuartps_resume(struct platform_device *pdev) } /* Match table for of_platform binding */ - -#ifdef CONFIG_OF -static struct of_device_id xuartps_of_match[] __devinitdata = { +static struct of_device_id xuartps_of_match[] = { { .compatible = "xlnx,xuartps", }, {} }; MODULE_DEVICE_TABLE(of, xuartps_of_match); -#else -#define xuartps_of_match NULL -#endif static struct platform_driver xuartps_platform_driver = { .probe = xuartps_probe, /* Probe method */ diff --git a/drivers/tty/synclink.c b/drivers/tty/synclink.c index 70e3a525bc8..9e071f6985f 100644 --- a/drivers/tty/synclink.c +++ b/drivers/tty/synclink.c @@ -898,7 +898,7 @@ static struct pci_driver synclink_pci_driver = { .name = "synclink", .id_table = synclink_pci_tbl, .probe = synclink_init_one, - .remove = __devexit_p(synclink_remove_one), + .remove = synclink_remove_one, }; static struct tty_driver *serial_driver; @@ -4425,6 +4425,7 @@ static void synclink_cleanup(void) mgsl_release_resources(info); tmp = info; info = info->next_device; + tty_port_destroy(&tmp->port); kfree(tmp); } @@ -8064,7 +8065,7 @@ static void hdlcdev_exit(struct mgsl_struct *info) #endif /* CONFIG_HDLC */ -static int __devinit synclink_init_one (struct pci_dev *dev, +static int synclink_init_one (struct pci_dev *dev, const struct pci_device_id *ent) { struct mgsl_struct *info; @@ -8116,7 +8117,7 @@ static int __devinit synclink_init_one (struct pci_dev *dev, return 0; } -static void __devexit synclink_remove_one (struct pci_dev *dev) +static void synclink_remove_one (struct pci_dev *dev) { } diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c index b38e954eedd..aba1e59f4a8 100644 --- a/drivers/tty/synclink_gt.c +++ b/drivers/tty/synclink_gt.c @@ -110,7 +110,7 @@ static struct pci_driver pci_driver = { .name = "synclink_gt", .id_table = pci_table, .probe = init_one, - .remove = __devexit_p(remove_one), + .remove = remove_one, }; static bool pci_registered; @@ -3645,8 +3645,10 @@ static void device_init(int adapter_num, struct pci_dev *pdev) for (i=0; i < port_count; ++i) { port_array[i] = alloc_dev(adapter_num, i, pdev); if (port_array[i] == NULL) { - for (--i; i >= 0; --i) + for (--i; i >= 0; --i) { + tty_port_destroy(&port_array[i]->port); kfree(port_array[i]); + } return; } } @@ -3696,7 +3698,7 @@ static void device_init(int adapter_num, struct pci_dev *pdev) } } -static int __devinit init_one(struct pci_dev *dev, +static int init_one(struct pci_dev *dev, const struct pci_device_id *ent) { if (pci_enable_device(dev)) { @@ -3708,7 +3710,7 @@ static int __devinit init_one(struct pci_dev *dev, return 0; } -static void __devexit remove_one(struct pci_dev *dev) +static void remove_one(struct pci_dev *dev) { } @@ -3773,6 +3775,7 @@ static void slgt_cleanup(void) release_resources(info); tmp = info; info = info->next_device; + tty_port_destroy(&tmp->port); kfree(tmp); } diff --git a/drivers/tty/synclinkmp.c b/drivers/tty/synclinkmp.c index f17d9f3d84a..fd43fb6f7ce 100644 --- a/drivers/tty/synclinkmp.c +++ b/drivers/tty/synclinkmp.c @@ -492,7 +492,7 @@ static struct pci_driver synclinkmp_pci_driver = { .name = "synclinkmp", .id_table = synclinkmp_pci_tbl, .probe = synclinkmp_init_one, - .remove = __devexit_p(synclinkmp_remove_one), + .remove = synclinkmp_remove_one, }; @@ -3843,8 +3843,10 @@ static void device_init(int adapter_num, struct pci_dev *pdev) for ( port = 0; port < SCA_MAX_PORTS; ++port ) { port_array[port] = alloc_dev(adapter_num,port,pdev); if( port_array[port] == NULL ) { - for ( --port; port >= 0; --port ) + for (--port; port >= 0; --port) { + tty_port_destroy(&port_array[port]->port); kfree(port_array[port]); + } return; } } @@ -3953,6 +3955,7 @@ static void synclinkmp_cleanup(void) } tmp = info; info = info->next_device; + tty_port_destroy(&tmp->port); kfree(tmp); } @@ -5592,7 +5595,7 @@ static void write_control_reg(SLMP_INFO * info) } -static int __devinit synclinkmp_init_one (struct pci_dev *dev, +static int synclinkmp_init_one (struct pci_dev *dev, const struct pci_device_id *ent) { if (pci_enable_device(dev)) { @@ -5603,6 +5606,6 @@ static int __devinit synclinkmp_init_one (struct pci_dev *dev, return 0; } -static void __devexit synclinkmp_remove_one (struct pci_dev *dev) +static void synclinkmp_remove_one (struct pci_dev *dev) { } diff --git a/drivers/tty/sysrq.c b/drivers/tty/sysrq.c index 16ee6cee07d..b3c4a250ff8 100644 --- a/drivers/tty/sysrq.c +++ b/drivers/tty/sysrq.c @@ -346,7 +346,8 @@ static struct sysrq_key_op sysrq_term_op = { static void moom_callback(struct work_struct *ignored) { - out_of_memory(node_zonelist(0, GFP_KERNEL), GFP_KERNEL, 0, NULL, true); + out_of_memory(node_zonelist(first_online_node, GFP_KERNEL), GFP_KERNEL, + 0, NULL, true); } static DECLARE_WORK(moom_work, moom_callback); diff --git a/drivers/tty/tty_audit.c b/drivers/tty/tty_audit.c index b0b39b823cc..6953dc82850 100644 --- a/drivers/tty/tty_audit.c +++ b/drivers/tty/tty_audit.c @@ -23,7 +23,7 @@ struct tty_audit_buf { }; static struct tty_audit_buf *tty_audit_buf_alloc(int major, int minor, - int icanon) + unsigned icanon) { struct tty_audit_buf *buf; @@ -239,7 +239,8 @@ int tty_audit_push_task(struct task_struct *tsk, kuid_t loginuid, u32 sessionid) * if TTY auditing is disabled or out of memory. Otherwise, return a new * reference to the buffer. */ -static struct tty_audit_buf *tty_audit_buf_get(struct tty_struct *tty) +static struct tty_audit_buf *tty_audit_buf_get(struct tty_struct *tty, + unsigned icanon) { struct tty_audit_buf *buf, *buf2; @@ -257,7 +258,7 @@ static struct tty_audit_buf *tty_audit_buf_get(struct tty_struct *tty) buf2 = tty_audit_buf_alloc(tty->driver->major, tty->driver->minor_start + tty->index, - tty->icanon); + icanon); if (buf2 == NULL) { audit_log_lost("out of memory in TTY auditing"); return NULL; @@ -287,7 +288,7 @@ static struct tty_audit_buf *tty_audit_buf_get(struct tty_struct *tty) * Audit @data of @size from @tty, if necessary. */ void tty_audit_add_data(struct tty_struct *tty, unsigned char *data, - size_t size) + size_t size, unsigned icanon) { struct tty_audit_buf *buf; int major, minor; @@ -299,7 +300,7 @@ void tty_audit_add_data(struct tty_struct *tty, unsigned char *data, && tty->driver->subtype == PTY_TYPE_MASTER) return; - buf = tty_audit_buf_get(tty); + buf = tty_audit_buf_get(tty, icanon); if (!buf) return; @@ -307,11 +308,11 @@ void tty_audit_add_data(struct tty_struct *tty, unsigned char *data, major = tty->driver->major; minor = tty->driver->minor_start + tty->index; if (buf->major != major || buf->minor != minor - || buf->icanon != tty->icanon) { + || buf->icanon != icanon) { tty_audit_buf_push_current(buf); buf->major = major; buf->minor = minor; - buf->icanon = tty->icanon; + buf->icanon = icanon; } do { size_t run; diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c index 91e326ffe7d..45d916198f7 100644 --- a/drivers/tty/tty_buffer.c +++ b/drivers/tty/tty_buffer.c @@ -27,19 +27,21 @@ * Locking: none */ -void tty_buffer_free_all(struct tty_struct *tty) +void tty_buffer_free_all(struct tty_port *port) { + struct tty_bufhead *buf = &port->buf; struct tty_buffer *thead; - while ((thead = tty->buf.head) != NULL) { - tty->buf.head = thead->next; + + while ((thead = buf->head) != NULL) { + buf->head = thead->next; kfree(thead); } - while ((thead = tty->buf.free) != NULL) { - tty->buf.free = thead->next; + while ((thead = buf->free) != NULL) { + buf->free = thead->next; kfree(thead); } - tty->buf.tail = NULL; - tty->buf.memory_used = 0; + buf->tail = NULL; + buf->memory_used = 0; } /** @@ -54,11 +56,11 @@ void tty_buffer_free_all(struct tty_struct *tty) * Locking: Caller must hold tty->buf.lock */ -static struct tty_buffer *tty_buffer_alloc(struct tty_struct *tty, size_t size) +static struct tty_buffer *tty_buffer_alloc(struct tty_port *port, size_t size) { struct tty_buffer *p; - if (tty->buf.memory_used + size > 65536) + if (port->buf.memory_used + size > 65536) return NULL; p = kmalloc(sizeof(struct tty_buffer) + 2 * size, GFP_ATOMIC); if (p == NULL) @@ -70,7 +72,7 @@ static struct tty_buffer *tty_buffer_alloc(struct tty_struct *tty, size_t size) p->read = 0; p->char_buf_ptr = (char *)(p->data); p->flag_buf_ptr = (unsigned char *)p->char_buf_ptr + size; - tty->buf.memory_used += size; + port->buf.memory_used += size; return p; } @@ -85,17 +87,19 @@ static struct tty_buffer *tty_buffer_alloc(struct tty_struct *tty, size_t size) * Locking: Caller must hold tty->buf.lock */ -static void tty_buffer_free(struct tty_struct *tty, struct tty_buffer *b) +static void tty_buffer_free(struct tty_port *port, struct tty_buffer *b) { + struct tty_bufhead *buf = &port->buf; + /* Dumb strategy for now - should keep some stats */ - tty->buf.memory_used -= b->size; - WARN_ON(tty->buf.memory_used < 0); + buf->memory_used -= b->size; + WARN_ON(buf->memory_used < 0); if (b->size >= 512) kfree(b); else { - b->next = tty->buf.free; - tty->buf.free = b; + b->next = buf->free; + buf->free = b; } } @@ -110,15 +114,16 @@ static void tty_buffer_free(struct tty_struct *tty, struct tty_buffer *b) * Locking: Caller must hold tty->buf.lock */ -static void __tty_buffer_flush(struct tty_struct *tty) +static void __tty_buffer_flush(struct tty_port *port) { + struct tty_bufhead *buf = &port->buf; struct tty_buffer *thead; - while ((thead = tty->buf.head) != NULL) { - tty->buf.head = thead->next; - tty_buffer_free(tty, thead); + while ((thead = buf->head) != NULL) { + buf->head = thead->next; + tty_buffer_free(port, thead); } - tty->buf.tail = NULL; + buf->tail = NULL; } /** @@ -134,21 +139,24 @@ static void __tty_buffer_flush(struct tty_struct *tty) void tty_buffer_flush(struct tty_struct *tty) { + struct tty_port *port = tty->port; + struct tty_bufhead *buf = &port->buf; unsigned long flags; - spin_lock_irqsave(&tty->buf.lock, flags); + + spin_lock_irqsave(&buf->lock, flags); /* If the data is being pushed to the tty layer then we can't process it here. Instead set a flag and the flush_to_ldisc path will process the flush request before it exits */ - if (test_bit(TTY_FLUSHING, &tty->flags)) { - set_bit(TTY_FLUSHPENDING, &tty->flags); - spin_unlock_irqrestore(&tty->buf.lock, flags); + if (test_bit(TTYP_FLUSHING, &port->iflags)) { + set_bit(TTYP_FLUSHPENDING, &port->iflags); + spin_unlock_irqrestore(&buf->lock, flags); wait_event(tty->read_wait, - test_bit(TTY_FLUSHPENDING, &tty->flags) == 0); + test_bit(TTYP_FLUSHPENDING, &port->iflags) == 0); return; } else - __tty_buffer_flush(tty); - spin_unlock_irqrestore(&tty->buf.lock, flags); + __tty_buffer_flush(port); + spin_unlock_irqrestore(&buf->lock, flags); } /** @@ -163,9 +171,9 @@ void tty_buffer_flush(struct tty_struct *tty) * Locking: Caller must hold tty->buf.lock */ -static struct tty_buffer *tty_buffer_find(struct tty_struct *tty, size_t size) +static struct tty_buffer *tty_buffer_find(struct tty_port *port, size_t size) { - struct tty_buffer **tbh = &tty->buf.free; + struct tty_buffer **tbh = &port->buf.free; while ((*tbh) != NULL) { struct tty_buffer *t = *tbh; if (t->size >= size) { @@ -174,14 +182,14 @@ static struct tty_buffer *tty_buffer_find(struct tty_struct *tty, size_t size) t->used = 0; t->commit = 0; t->read = 0; - tty->buf.memory_used += t->size; + port->buf.memory_used += t->size; return t; } tbh = &((*tbh)->next); } /* Round the buffer size out */ size = (size + 0xFF) & ~0xFF; - return tty_buffer_alloc(tty, size); + return tty_buffer_alloc(port, size); /* Should possibly check if this fails for the largest buffer we have queued and recycle that ? */ } @@ -192,29 +200,31 @@ static struct tty_buffer *tty_buffer_find(struct tty_struct *tty, size_t size) * * Make at least size bytes of linear space available for the tty * buffer. If we fail return the size we managed to find. - * Locking: Caller must hold tty->buf.lock + * Locking: Caller must hold port->buf.lock */ -static int __tty_buffer_request_room(struct tty_struct *tty, size_t size) +static int __tty_buffer_request_room(struct tty_port *port, size_t size) { + struct tty_bufhead *buf = &port->buf; struct tty_buffer *b, *n; int left; /* OPTIMISATION: We could keep a per tty "zero" sized buffer to remove this conditional if its worth it. This would be invisible to the callers */ - if ((b = tty->buf.tail) != NULL) + b = buf->tail; + if (b != NULL) left = b->size - b->used; else left = 0; if (left < size) { /* This is the slow path - looking for new buffers to use */ - if ((n = tty_buffer_find(tty, size)) != NULL) { + if ((n = tty_buffer_find(port, size)) != NULL) { if (b != NULL) { b->next = n; b->commit = b->used; } else - tty->buf.head = n; - tty->buf.tail = n; + buf->head = n; + buf->tail = n; } else size = left; } @@ -231,16 +241,17 @@ static int __tty_buffer_request_room(struct tty_struct *tty, size_t size) * Make at least size bytes of linear space available for the tty * buffer. If we fail return the size we managed to find. * - * Locking: Takes tty->buf.lock + * Locking: Takes port->buf.lock */ int tty_buffer_request_room(struct tty_struct *tty, size_t size) { + struct tty_port *port = tty->port; unsigned long flags; int length; - spin_lock_irqsave(&tty->buf.lock, flags); - length = __tty_buffer_request_room(tty, size); - spin_unlock_irqrestore(&tty->buf.lock, flags); + spin_lock_irqsave(&port->buf.lock, flags); + length = __tty_buffer_request_room(port, size); + spin_unlock_irqrestore(&port->buf.lock, flags); return length; } EXPORT_SYMBOL_GPL(tty_buffer_request_room); @@ -255,12 +266,13 @@ EXPORT_SYMBOL_GPL(tty_buffer_request_room); * Queue a series of bytes to the tty buffering. All the characters * passed are marked with the supplied flag. Returns the number added. * - * Locking: Called functions may take tty->buf.lock + * Locking: Called functions may take port->buf.lock */ int tty_insert_flip_string_fixed_flag(struct tty_struct *tty, const unsigned char *chars, char flag, size_t size) { + struct tty_bufhead *buf = &tty->port->buf; int copied = 0; do { int goal = min_t(size_t, size - copied, TTY_BUFFER_PAGE); @@ -268,18 +280,18 @@ int tty_insert_flip_string_fixed_flag(struct tty_struct *tty, unsigned long flags; struct tty_buffer *tb; - spin_lock_irqsave(&tty->buf.lock, flags); - space = __tty_buffer_request_room(tty, goal); - tb = tty->buf.tail; + spin_lock_irqsave(&buf->lock, flags); + space = __tty_buffer_request_room(tty->port, goal); + tb = buf->tail; /* If there is no space then tb may be NULL */ if (unlikely(space == 0)) { - spin_unlock_irqrestore(&tty->buf.lock, flags); + spin_unlock_irqrestore(&buf->lock, flags); break; } memcpy(tb->char_buf_ptr + tb->used, chars, space); memset(tb->flag_buf_ptr + tb->used, flag, space); tb->used += space; - spin_unlock_irqrestore(&tty->buf.lock, flags); + spin_unlock_irqrestore(&buf->lock, flags); copied += space; chars += space; /* There is a small chance that we need to split the data over @@ -300,12 +312,13 @@ EXPORT_SYMBOL(tty_insert_flip_string_fixed_flag); * the flags array indicates the status of the character. Returns the * number added. * - * Locking: Called functions may take tty->buf.lock + * Locking: Called functions may take port->buf.lock */ int tty_insert_flip_string_flags(struct tty_struct *tty, const unsigned char *chars, const char *flags, size_t size) { + struct tty_bufhead *buf = &tty->port->buf; int copied = 0; do { int goal = min_t(size_t, size - copied, TTY_BUFFER_PAGE); @@ -313,18 +326,18 @@ int tty_insert_flip_string_flags(struct tty_struct *tty, unsigned long __flags; struct tty_buffer *tb; - spin_lock_irqsave(&tty->buf.lock, __flags); - space = __tty_buffer_request_room(tty, goal); - tb = tty->buf.tail; + spin_lock_irqsave(&buf->lock, __flags); + space = __tty_buffer_request_room(tty->port, goal); + tb = buf->tail; /* If there is no space then tb may be NULL */ if (unlikely(space == 0)) { - spin_unlock_irqrestore(&tty->buf.lock, __flags); + spin_unlock_irqrestore(&buf->lock, __flags); break; } memcpy(tb->char_buf_ptr + tb->used, chars, space); memcpy(tb->flag_buf_ptr + tb->used, flags, space); tb->used += space; - spin_unlock_irqrestore(&tty->buf.lock, __flags); + spin_unlock_irqrestore(&buf->lock, __flags); copied += space; chars += space; flags += space; @@ -342,18 +355,23 @@ EXPORT_SYMBOL(tty_insert_flip_string_flags); * Takes any pending buffers and transfers their ownership to the * ldisc side of the queue. It then schedules those characters for * processing by the line discipline. + * Note that this function can only be used when the low_latency flag + * is unset. Otherwise the workqueue won't be flushed. * - * Locking: Takes tty->buf.lock + * Locking: Takes port->buf.lock */ void tty_schedule_flip(struct tty_struct *tty) { + struct tty_bufhead *buf = &tty->port->buf; unsigned long flags; - spin_lock_irqsave(&tty->buf.lock, flags); - if (tty->buf.tail != NULL) - tty->buf.tail->commit = tty->buf.tail->used; - spin_unlock_irqrestore(&tty->buf.lock, flags); - schedule_work(&tty->buf.work); + WARN_ON(tty->low_latency); + + spin_lock_irqsave(&buf->lock, flags); + if (buf->tail != NULL) + buf->tail->commit = buf->tail->used; + spin_unlock_irqrestore(&buf->lock, flags); + schedule_work(&buf->work); } EXPORT_SYMBOL(tty_schedule_flip); @@ -369,26 +387,27 @@ EXPORT_SYMBOL(tty_schedule_flip); * that need their own block copy routines into the buffer. There is no * guarantee the buffer is a DMA target! * - * Locking: May call functions taking tty->buf.lock + * Locking: May call functions taking port->buf.lock */ int tty_prepare_flip_string(struct tty_struct *tty, unsigned char **chars, - size_t size) + size_t size) { + struct tty_bufhead *buf = &tty->port->buf; int space; unsigned long flags; struct tty_buffer *tb; - spin_lock_irqsave(&tty->buf.lock, flags); - space = __tty_buffer_request_room(tty, size); + spin_lock_irqsave(&buf->lock, flags); + space = __tty_buffer_request_room(tty->port, size); - tb = tty->buf.tail; + tb = buf->tail; if (likely(space)) { *chars = tb->char_buf_ptr + tb->used; memset(tb->flag_buf_ptr + tb->used, TTY_NORMAL, space); tb->used += space; } - spin_unlock_irqrestore(&tty->buf.lock, flags); + spin_unlock_irqrestore(&buf->lock, flags); return space; } EXPORT_SYMBOL_GPL(tty_prepare_flip_string); @@ -406,26 +425,27 @@ EXPORT_SYMBOL_GPL(tty_prepare_flip_string); * that need their own block copy routines into the buffer. There is no * guarantee the buffer is a DMA target! * - * Locking: May call functions taking tty->buf.lock + * Locking: May call functions taking port->buf.lock */ int tty_prepare_flip_string_flags(struct tty_struct *tty, unsigned char **chars, char **flags, size_t size) { + struct tty_bufhead *buf = &tty->port->buf; int space; unsigned long __flags; struct tty_buffer *tb; - spin_lock_irqsave(&tty->buf.lock, __flags); - space = __tty_buffer_request_room(tty, size); + spin_lock_irqsave(&buf->lock, __flags); + space = __tty_buffer_request_room(tty->port, size); - tb = tty->buf.tail; + tb = buf->tail; if (likely(space)) { *chars = tb->char_buf_ptr + tb->used; *flags = tb->flag_buf_ptr + tb->used; tb->used += space; } - spin_unlock_irqrestore(&tty->buf.lock, __flags); + spin_unlock_irqrestore(&buf->lock, __flags); return space; } EXPORT_SYMBOL_GPL(tty_prepare_flip_string_flags); @@ -446,20 +466,25 @@ EXPORT_SYMBOL_GPL(tty_prepare_flip_string_flags); static void flush_to_ldisc(struct work_struct *work) { - struct tty_struct *tty = - container_of(work, struct tty_struct, buf.work); + struct tty_port *port = container_of(work, struct tty_port, buf.work); + struct tty_bufhead *buf = &port->buf; + struct tty_struct *tty; unsigned long flags; struct tty_ldisc *disc; + tty = port->itty; + if (WARN_RATELIMIT(tty == NULL, "tty is NULL\n")) + return; + disc = tty_ldisc_ref(tty); if (disc == NULL) /* !TTY_LDISC */ return; - spin_lock_irqsave(&tty->buf.lock, flags); + spin_lock_irqsave(&buf->lock, flags); - if (!test_and_set_bit(TTY_FLUSHING, &tty->flags)) { + if (!test_and_set_bit(TTYP_FLUSHING, &port->iflags)) { struct tty_buffer *head; - while ((head = tty->buf.head) != NULL) { + while ((head = buf->head) != NULL) { int count; char *char_buf; unsigned char *flag_buf; @@ -468,14 +493,14 @@ static void flush_to_ldisc(struct work_struct *work) if (!count) { if (head->next == NULL) break; - tty->buf.head = head->next; - tty_buffer_free(tty, head); + buf->head = head->next; + tty_buffer_free(port, head); continue; } /* Ldisc or user is trying to flush the buffers we are feeding to the ldisc, stop feeding the line discipline as we want to empty the queue */ - if (test_bit(TTY_FLUSHPENDING, &tty->flags)) + if (test_bit(TTYP_FLUSHPENDING, &port->iflags)) break; if (!tty->receive_room) break; @@ -484,22 +509,22 @@ static void flush_to_ldisc(struct work_struct *work) char_buf = head->char_buf_ptr + head->read; flag_buf = head->flag_buf_ptr + head->read; head->read += count; - spin_unlock_irqrestore(&tty->buf.lock, flags); + spin_unlock_irqrestore(&buf->lock, flags); disc->ops->receive_buf(tty, char_buf, flag_buf, count); - spin_lock_irqsave(&tty->buf.lock, flags); + spin_lock_irqsave(&buf->lock, flags); } - clear_bit(TTY_FLUSHING, &tty->flags); + clear_bit(TTYP_FLUSHING, &port->iflags); } /* We may have a deferred request to flush the input buffer, if so pull the chain under the lock and empty the queue */ - if (test_bit(TTY_FLUSHPENDING, &tty->flags)) { - __tty_buffer_flush(tty); - clear_bit(TTY_FLUSHPENDING, &tty->flags); + if (test_bit(TTYP_FLUSHPENDING, &port->iflags)) { + __tty_buffer_flush(port); + clear_bit(TTYP_FLUSHPENDING, &port->iflags); wake_up(&tty->read_wait); } - spin_unlock_irqrestore(&tty->buf.lock, flags); + spin_unlock_irqrestore(&buf->lock, flags); tty_ldisc_deref(disc); } @@ -514,7 +539,8 @@ static void flush_to_ldisc(struct work_struct *work) */ void tty_flush_to_ldisc(struct tty_struct *tty) { - flush_work(&tty->buf.work); + if (!tty->low_latency) + flush_work(&tty->port->buf.work); } /** @@ -532,16 +558,18 @@ void tty_flush_to_ldisc(struct tty_struct *tty) void tty_flip_buffer_push(struct tty_struct *tty) { + struct tty_bufhead *buf = &tty->port->buf; unsigned long flags; - spin_lock_irqsave(&tty->buf.lock, flags); - if (tty->buf.tail != NULL) - tty->buf.tail->commit = tty->buf.tail->used; - spin_unlock_irqrestore(&tty->buf.lock, flags); + + spin_lock_irqsave(&buf->lock, flags); + if (buf->tail != NULL) + buf->tail->commit = buf->tail->used; + spin_unlock_irqrestore(&buf->lock, flags); if (tty->low_latency) - flush_to_ldisc(&tty->buf.work); + flush_to_ldisc(&buf->work); else - schedule_work(&tty->buf.work); + schedule_work(&buf->work); } EXPORT_SYMBOL(tty_flip_buffer_push); @@ -555,13 +583,15 @@ EXPORT_SYMBOL(tty_flip_buffer_push); * Locking: none */ -void tty_buffer_init(struct tty_struct *tty) +void tty_buffer_init(struct tty_port *port) { - spin_lock_init(&tty->buf.lock); - tty->buf.head = NULL; - tty->buf.tail = NULL; - tty->buf.free = NULL; - tty->buf.memory_used = 0; - INIT_WORK(&tty->buf.work, flush_to_ldisc); + struct tty_bufhead *buf = &port->buf; + + spin_lock_init(&buf->lock); + buf->head = NULL; + buf->tail = NULL; + buf->free = NULL; + buf->memory_used = 0; + INIT_WORK(&buf->work, flush_to_ldisc); } diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index 2ea176b2280..da9fde85075 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -186,7 +186,6 @@ void free_tty_struct(struct tty_struct *tty) if (tty->dev) put_device(tty->dev); kfree(tty->write_buf); - tty_buffer_free_all(tty); tty->magic = 0xDEADDEAD; kfree(tty); } @@ -237,7 +236,7 @@ void tty_free_file(struct file *file) } /* Delete file from its tty */ -void tty_del_file(struct file *file) +static void tty_del_file(struct file *file) { struct tty_file_private *priv = file->private_data; @@ -555,7 +554,7 @@ EXPORT_SYMBOL_GPL(tty_wakeup); * tasklist_lock to walk task list for hangup event * ->siglock to protect ->signal/->sighand */ -void __tty_hangup(struct tty_struct *tty) +static void __tty_hangup(struct tty_struct *tty) { struct file *cons_filp = NULL; struct file *filp, *f = NULL; @@ -1417,6 +1416,8 @@ struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx) "%s: %s driver does not set tty->port. This will crash the kernel later. Fix the driver!\n", __func__, tty->driver->name); + tty->port->itty = tty; + /* * Structures all installed ... call the ldisc open routines. * If we fail here just call release_tty to clean up. No need @@ -1552,6 +1553,7 @@ static void release_tty(struct tty_struct *tty, int idx) tty->ops->shutdown(tty); tty_free_termios(tty); tty_driver_remove_tty(tty->driver, tty); + tty->port->itty = NULL; if (tty->link) tty_kref_put(tty->link); @@ -1625,7 +1627,6 @@ int tty_release(struct inode *inode, struct file *filp) struct tty_struct *tty = file_tty(filp); struct tty_struct *o_tty; int pty_master, tty_closing, o_tty_closing, do_sleep; - int devpts; int idx; char buf[64]; @@ -1640,7 +1641,6 @@ int tty_release(struct inode *inode, struct file *filp) idx = tty->index; pty_master = (tty->driver->type == TTY_DRIVER_TYPE_PTY && tty->driver->subtype == PTY_TYPE_MASTER); - devpts = (tty->driver->flags & TTY_DRIVER_DEVPTS_MEM) != 0; /* Review: parallel close */ o_tty = tty->link; @@ -1799,9 +1799,6 @@ int tty_release(struct inode *inode, struct file *filp) release_tty(tty, idx); mutex_unlock(&tty_mutex); - /* Make this pty number available for reallocation */ - if (devpts) - devpts_kill_index(inode, idx); return 0; } @@ -2690,6 +2687,11 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg) case TIOCNXCL: clear_bit(TTY_EXCLUSIVE, &tty->flags); return 0; + case TIOCGEXCL: + { + int excl = test_bit(TTY_EXCLUSIVE, &tty->flags); + return put_user(excl, (int __user *)p); + } case TIOCNOTTY: if (current->signal->tty != tty) return -ENOTTY; @@ -2937,19 +2939,13 @@ void initialize_tty_struct(struct tty_struct *tty, tty_ldisc_init(tty); tty->session = NULL; tty->pgrp = NULL; - tty->overrun_time = jiffies; - tty_buffer_init(tty); mutex_init(&tty->legacy_mutex); mutex_init(&tty->termios_mutex); mutex_init(&tty->ldisc_mutex); init_waitqueue_head(&tty->write_wait); init_waitqueue_head(&tty->read_wait); INIT_WORK(&tty->hangup_work, do_tty_hangup); - mutex_init(&tty->atomic_read_lock); mutex_init(&tty->atomic_write_lock); - mutex_init(&tty->output_lock); - mutex_init(&tty->echo_lock); - spin_lock_init(&tty->read_lock); spin_lock_init(&tty->ctrl_lock); INIT_LIST_HEAD(&tty->tty_files); INIT_WORK(&tty->SAK_work, do_SAK_work); diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c index 12b1fa0f4f8..8481b29d5b3 100644 --- a/drivers/tty/tty_ioctl.c +++ b/drivers/tty/tty_ioctl.c @@ -1118,7 +1118,6 @@ EXPORT_SYMBOL_GPL(tty_perform_flush); int n_tty_ioctl_helper(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) { - unsigned long flags; int retval; switch (cmd) { @@ -1153,26 +1152,6 @@ int n_tty_ioctl_helper(struct tty_struct *tty, struct file *file, return 0; case TCFLSH: return tty_perform_flush(tty, arg); - case TIOCPKT: - { - int pktmode; - - if (tty->driver->type != TTY_DRIVER_TYPE_PTY || - tty->driver->subtype != PTY_TYPE_MASTER) - return -ENOTTY; - if (get_user(pktmode, (int __user *) arg)) - return -EFAULT; - spin_lock_irqsave(&tty->ctrl_lock, flags); - if (pktmode) { - if (!tty->packet) { - tty->packet = 1; - tty->link->ctrl_status = 0; - } - } else - tty->packet = 0; - spin_unlock_irqrestore(&tty->ctrl_lock, flags); - return 0; - } default: /* Try the mode commands */ return tty_mode_ioctl(tty, file, cmd, arg); diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c index 0f2a2c5e704..c5782294e53 100644 --- a/drivers/tty/tty_ldisc.c +++ b/drivers/tty/tty_ldisc.c @@ -26,7 +26,7 @@ * callers who will do ldisc lookups and cannot sleep. */ -static DEFINE_SPINLOCK(tty_ldisc_lock); +static DEFINE_RAW_SPINLOCK(tty_ldisc_lock); static DECLARE_WAIT_QUEUE_HEAD(tty_ldisc_wait); /* Line disc dispatch table */ static struct tty_ldisc_ops *tty_ldiscs[NR_LDISCS]; @@ -49,21 +49,21 @@ static void put_ldisc(struct tty_ldisc *ld) * If this is the last user, free the ldisc, and * release the ldisc ops. * - * We really want an "atomic_dec_and_lock_irqsave()", + * We really want an "atomic_dec_and_raw_lock_irqsave()", * but we don't have it, so this does it by hand. */ - local_irq_save(flags); - if (atomic_dec_and_lock(&ld->users, &tty_ldisc_lock)) { + raw_spin_lock_irqsave(&tty_ldisc_lock, flags); + if (atomic_dec_and_test(&ld->users)) { struct tty_ldisc_ops *ldo = ld->ops; ldo->refcount--; module_put(ldo->owner); - spin_unlock_irqrestore(&tty_ldisc_lock, flags); + raw_spin_unlock_irqrestore(&tty_ldisc_lock, flags); kfree(ld); return; } - local_irq_restore(flags); + raw_spin_unlock_irqrestore(&tty_ldisc_lock, flags); wake_up(&ld->wq_idle); } @@ -88,11 +88,11 @@ int tty_register_ldisc(int disc, struct tty_ldisc_ops *new_ldisc) if (disc < N_TTY || disc >= NR_LDISCS) return -EINVAL; - spin_lock_irqsave(&tty_ldisc_lock, flags); + raw_spin_lock_irqsave(&tty_ldisc_lock, flags); tty_ldiscs[disc] = new_ldisc; new_ldisc->num = disc; new_ldisc->refcount = 0; - spin_unlock_irqrestore(&tty_ldisc_lock, flags); + raw_spin_unlock_irqrestore(&tty_ldisc_lock, flags); return ret; } @@ -118,12 +118,12 @@ int tty_unregister_ldisc(int disc) if (disc < N_TTY || disc >= NR_LDISCS) return -EINVAL; - spin_lock_irqsave(&tty_ldisc_lock, flags); + raw_spin_lock_irqsave(&tty_ldisc_lock, flags); if (tty_ldiscs[disc]->refcount) ret = -EBUSY; else tty_ldiscs[disc] = NULL; - spin_unlock_irqrestore(&tty_ldisc_lock, flags); + raw_spin_unlock_irqrestore(&tty_ldisc_lock, flags); return ret; } @@ -134,7 +134,7 @@ static struct tty_ldisc_ops *get_ldops(int disc) unsigned long flags; struct tty_ldisc_ops *ldops, *ret; - spin_lock_irqsave(&tty_ldisc_lock, flags); + raw_spin_lock_irqsave(&tty_ldisc_lock, flags); ret = ERR_PTR(-EINVAL); ldops = tty_ldiscs[disc]; if (ldops) { @@ -144,7 +144,7 @@ static struct tty_ldisc_ops *get_ldops(int disc) ret = ldops; } } - spin_unlock_irqrestore(&tty_ldisc_lock, flags); + raw_spin_unlock_irqrestore(&tty_ldisc_lock, flags); return ret; } @@ -152,10 +152,10 @@ static void put_ldops(struct tty_ldisc_ops *ldops) { unsigned long flags; - spin_lock_irqsave(&tty_ldisc_lock, flags); + raw_spin_lock_irqsave(&tty_ldisc_lock, flags); ldops->refcount--; module_put(ldops->owner); - spin_unlock_irqrestore(&tty_ldisc_lock, flags); + raw_spin_unlock_irqrestore(&tty_ldisc_lock, flags); } /** @@ -287,11 +287,11 @@ static struct tty_ldisc *tty_ldisc_try(struct tty_struct *tty) unsigned long flags; struct tty_ldisc *ld; - spin_lock_irqsave(&tty_ldisc_lock, flags); + raw_spin_lock_irqsave(&tty_ldisc_lock, flags); ld = NULL; if (test_bit(TTY_LDISC, &tty->flags)) ld = get_ldisc(tty->ldisc); - spin_unlock_irqrestore(&tty_ldisc_lock, flags); + raw_spin_unlock_irqrestore(&tty_ldisc_lock, flags); return ld; } @@ -512,7 +512,7 @@ static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old) static int tty_ldisc_halt(struct tty_struct *tty) { clear_bit(TTY_LDISC, &tty->flags); - return cancel_work_sync(&tty->buf.work); + return cancel_work_sync(&tty->port->buf.work); } /** @@ -525,7 +525,7 @@ static void tty_ldisc_flush_works(struct tty_struct *tty) { flush_work(&tty->hangup_work); flush_work(&tty->SAK_work); - flush_work(&tty->buf.work); + flush_work(&tty->port->buf.work); } /** @@ -704,9 +704,9 @@ enable: /* Restart the work queue in case no characters kick it off. Safe if already running */ if (work) - schedule_work(&tty->buf.work); + schedule_work(&tty->port->buf.work); if (o_work) - schedule_work(&o_tty->buf.work); + schedule_work(&o_tty->port->buf.work); mutex_unlock(&tty->ldisc_mutex); tty_unlock(tty); return retval; @@ -817,7 +817,7 @@ void tty_ldisc_hangup(struct tty_struct *tty) */ clear_bit(TTY_LDISC, &tty->flags); tty_unlock(tty); - cancel_work_sync(&tty->buf.work); + cancel_work_sync(&tty->port->buf.work); mutex_unlock(&tty->ldisc_mutex); retry: tty_lock(tty); @@ -897,6 +897,11 @@ int tty_ldisc_setup(struct tty_struct *tty, struct tty_struct *o_tty) static void tty_ldisc_kill(struct tty_struct *tty) { + /* There cannot be users from userspace now. But there still might be + * drivers holding a reference via tty_ldisc_ref. Do not steal them the + * ldisc until they are done. */ + tty_ldisc_wait_idle(tty, MAX_SCHEDULE_TIMEOUT); + mutex_lock(&tty->ldisc_mutex); /* * Now kill off the ldisc diff --git a/drivers/tty/tty_mutex.c b/drivers/tty/tty_mutex.c index 67feac9e6eb..2e41abebbcb 100644 --- a/drivers/tty/tty_mutex.c +++ b/drivers/tty/tty_mutex.c @@ -19,7 +19,7 @@ static void __lockfunc tty_lock_nested(struct tty_struct *tty, unsigned int subclass) { if (tty->magic != TTY_MAGIC) { - printk(KERN_ERR "L Bad %p\n", tty); + pr_err("L Bad %p\n", tty); WARN_ON(1); return; } @@ -36,7 +36,7 @@ EXPORT_SYMBOL(tty_lock); void __lockfunc tty_unlock(struct tty_struct *tty) { if (tty->magic != TTY_MAGIC) { - printk(KERN_ERR "U Bad %p\n", tty); + pr_err("U Bad %p\n", tty); WARN_ON(1); return; } diff --git a/drivers/tty/tty_port.c b/drivers/tty/tty_port.c index d7bdd8d0c23..b7ff59d3db8 100644 --- a/drivers/tty/tty_port.c +++ b/drivers/tty/tty_port.c @@ -21,6 +21,7 @@ void tty_port_init(struct tty_port *port) { memset(port, 0, sizeof(*port)); + tty_buffer_init(port); init_waitqueue_head(&port->open_wait); init_waitqueue_head(&port->close_wait); init_waitqueue_head(&port->delta_msr_wait); @@ -121,12 +122,27 @@ void tty_port_free_xmit_buf(struct tty_port *port) } EXPORT_SYMBOL(tty_port_free_xmit_buf); +/** + * tty_port_destroy -- destroy inited port + * @port: tty port to be doestroyed + * + * When a port was initialized using tty_port_init, one has to destroy the + * port by this function. Either indirectly by using tty_port refcounting + * (tty_port_put) or directly if refcounting is not used. + */ +void tty_port_destroy(struct tty_port *port) +{ + tty_buffer_free_all(port); +} +EXPORT_SYMBOL(tty_port_destroy); + static void tty_port_destructor(struct kref *kref) { struct tty_port *port = container_of(kref, struct tty_port, kref); if (port->xmit_buf) free_page((unsigned long)port->xmit_buf); - if (port->ops->destruct) + tty_port_destroy(port); + if (port->ops && port->ops->destruct) port->ops->destruct(port); else kfree(port); diff --git a/drivers/tty/vt/consolemap.c b/drivers/tty/vt/consolemap.c index 2aaa0c22840..248381b3072 100644 --- a/drivers/tty/vt/consolemap.c +++ b/drivers/tty/vt/consolemap.c @@ -410,10 +410,8 @@ static void con_release_unimap(struct uni_pagedir *p) kfree(p->inverse_translations[i]); p->inverse_translations[i] = NULL; } - if (p->inverse_trans_unicode) { - kfree(p->inverse_trans_unicode); - p->inverse_trans_unicode = NULL; - } + kfree(p->inverse_trans_unicode); + p->inverse_trans_unicode = NULL; } /* Caller must hold the console lock */ diff --git a/drivers/tty/vt/selection.c b/drivers/tty/vt/selection.c index 8e9b4be97a2..60b7b692605 100644 --- a/drivers/tty/vt/selection.c +++ b/drivers/tty/vt/selection.c @@ -341,15 +341,11 @@ int paste_selection(struct tty_struct *tty) struct tty_ldisc *ld; DECLARE_WAITQUEUE(wait, current); - console_lock(); poke_blanked_console(); console_unlock(); - /* FIXME: wtf is this supposed to achieve ? */ - ld = tty_ldisc_ref(tty); - if (!ld) - ld = tty_ldisc_ref_wait(tty); + ld = tty_ldisc_ref_wait(tty); /* FIXME: this is completely unsafe */ add_wait_queue(&vc->paste_wait, &wait); @@ -361,8 +357,7 @@ int paste_selection(struct tty_struct *tty) } count = sel_buffer_lth - pasted; count = min(count, tty->receive_room); - tty->ldisc->ops->receive_buf(tty, sel_buffer + pasted, - NULL, count); + ld->ops->receive_buf(tty, sel_buffer + pasted, NULL, count); pasted += count; } remove_wait_queue(&vc->paste_wait, &wait); diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index 4e0d0c3734b..8fd89687d06 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -779,6 +779,7 @@ int vc_allocate(unsigned int currcons) /* return 0 on success */ con_set_default_unimap(vc); vc->vc_screenbuf = kmalloc(vc->vc_screenbuf_size, GFP_KERNEL); if (!vc->vc_screenbuf) { + tty_port_destroy(&vc->port); kfree(vc); vc_cons[currcons].d = NULL; return -ENOMEM; @@ -999,8 +1000,10 @@ void vc_deallocate(unsigned int currcons) put_pid(vc->vt_pid); module_put(vc->vc_sw->owner); kfree(vc->vc_screenbuf); - if (currcons >= MIN_NR_CONSOLES) + if (currcons >= MIN_NR_CONSOLES) { + tty_port_destroy(&vc->port); kfree(vc); + } vc_cons[currcons].d = NULL; } } diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c index b841f56d2e6..98ff1735eaf 100644 --- a/drivers/tty/vt/vt_ioctl.c +++ b/drivers/tty/vt/vt_ioctl.c @@ -25,6 +25,7 @@ #include <linux/console.h> #include <linux/consolemap.h> #include <linux/signal.h> +#include <linux/suspend.h> #include <linux/timex.h> #include <asm/io.h> |