diff options
Diffstat (limited to 'drivers/tty')
40 files changed, 2182 insertions, 448 deletions
diff --git a/drivers/tty/Makefile b/drivers/tty/Makefile index 6b78399bc7c..58ad1c05b7f 100644 --- a/drivers/tty/Makefile +++ b/drivers/tty/Makefile @@ -1,5 +1,5 @@ obj-$(CONFIG_TTY) += tty_io.o n_tty.o tty_ioctl.o tty_ldisc.o \ - tty_buffer.o tty_port.o tty_mutex.o + tty_buffer.o tty_port.o tty_mutex.o tty_ldsem.o obj-$(CONFIG_LEGACY_PTYS) += pty.o obj-$(CONFIG_UNIX98_PTYS) += pty.o obj-$(CONFIG_AUDIT) += tty_audit.o diff --git a/drivers/tty/hvc/hvc_iucv.c b/drivers/tty/hvc/hvc_iucv.c index b6f7d52f7c3..9d47f50c275 100644 --- a/drivers/tty/hvc/hvc_iucv.c +++ b/drivers/tty/hvc/hvc_iucv.c @@ -1328,7 +1328,7 @@ out_error: */ static int __init hvc_iucv_config(char *val) { - return strict_strtoul(val, 10, &hvc_iucv_devices); + return kstrtoul(val, 10, &hvc_iucv_devices); } diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 6c7fe90ad72..4bf0fc0843d 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -89,6 +89,7 @@ struct n_tty_data { int read_head; int read_tail; int read_cnt; + int minimum_to_wake; unsigned char *echo_buf; unsigned int echo_pos; @@ -114,22 +115,25 @@ static inline int tty_put_user(struct tty_struct *tty, unsigned char x, } /** - * n_tty_set__room - receive space + * n_tty_set_room - receive space * @tty: terminal * - * Called by the driver to find out how much data it is - * permitted to feed to the line discipline without any being lost - * and thus to manage flow control. Not serialized. Answers for the - * "instant". + * Updates tty->receive_room to reflect the currently available space + * in the input buffer, and re-schedules the flip buffer work if space + * just became available. + * + * Locks: Concurrent update is protected with read_lock */ -static void n_tty_set_room(struct tty_struct *tty) +static int set_room(struct tty_struct *tty) { struct n_tty_data *ldata = tty->disc_data; int left; int old_left; + unsigned long flags; + + raw_spin_lock_irqsave(&ldata->read_lock, flags); - /* ldata->read_cnt is not read locked ? */ if (I_PARMRK(tty)) { /* Multiply read_cnt by 3, since each byte might take up to * three times as many spaces when PARMRK is set (depending on @@ -149,8 +153,15 @@ static void n_tty_set_room(struct tty_struct *tty) old_left = tty->receive_room; tty->receive_room = left; + raw_spin_unlock_irqrestore(&ldata->read_lock, flags); + + return left && !old_left; +} + +static void n_tty_set_room(struct tty_struct *tty) +{ /* Did this open up the receive buffer? We may need to flip */ - if (left && !old_left) { + if (set_room(tty)) { WARN_RATELIMIT(tty->port->itty == NULL, "scheduling with invalid itty\n"); /* see if ldisc has been killed - if so, this means that @@ -647,8 +658,7 @@ static void process_echoes(struct tty_struct *tty) if (no_space_left) break; } else { - if (O_OPOST(tty) && - !(test_bit(TTY_HW_COOK_OUT, &tty->flags))) { + if (O_OPOST(tty)) { int retval = do_output_char(c, tty, space); if (retval < 0) break; @@ -1454,9 +1464,9 @@ static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp, tty->ops->flush_chars(tty); } - n_tty_set_room(tty); + set_room(tty); - if ((!ldata->icanon && (ldata->read_cnt >= tty->minimum_to_wake)) || + if ((!ldata->icanon && (ldata->read_cnt >= ldata->minimum_to_wake)) || L_EXTPROC(tty)) { kill_fasync(&tty->fasync, SIGIO, POLL_IN); if (waitqueue_active(&tty->read_wait)) @@ -1516,12 +1526,7 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old) wake_up_interruptible(&tty->read_wait); ldata->icanon = (L_ICANON(tty) != 0); - if (test_bit(TTY_HW_COOK_IN, &tty->flags)) { - ldata->raw = 1; - ldata->real_raw = 1; - n_tty_set_room(tty); - return; - } + if (I_ISTRIP(tty) || I_IUCLC(tty) || I_IGNCR(tty) || I_ICRNL(tty) || I_INLCR(tty) || L_ICANON(tty) || I_IXON(tty) || L_ISIG(tty) || L_ECHO(tty) || @@ -1642,7 +1647,7 @@ static int n_tty_open(struct tty_struct *tty) tty->disc_data = ldata; reset_buffer_flags(tty->disc_data); ldata->column = 0; - tty->minimum_to_wake = 1; + ldata->minimum_to_wake = 1; tty->closing = 0; /* indicate buffer work may resume */ clear_bit(TTY_LDISC_HALTED, &tty->flags); @@ -1806,21 +1811,17 @@ do_it_again: minimum = time = 0; timeout = MAX_SCHEDULE_TIMEOUT; if (!ldata->icanon) { - time = (HZ / 10) * TIME_CHAR(tty); minimum = MIN_CHAR(tty); if (minimum) { + time = (HZ / 10) * TIME_CHAR(tty); if (time) - tty->minimum_to_wake = 1; + ldata->minimum_to_wake = 1; else if (!waitqueue_active(&tty->read_wait) || - (tty->minimum_to_wake > minimum)) - tty->minimum_to_wake = minimum; + (ldata->minimum_to_wake > minimum)) + ldata->minimum_to_wake = minimum; } else { - timeout = 0; - if (time) { - timeout = time; - time = 0; - } - tty->minimum_to_wake = minimum = 1; + timeout = (HZ / 10) * TIME_CHAR(tty); + ldata->minimum_to_wake = minimum = 1; } } @@ -1860,9 +1861,9 @@ do_it_again: TASK_RUNNING. */ set_current_state(TASK_INTERRUPTIBLE); - if (((minimum - (b - buf)) < tty->minimum_to_wake) && + if (((minimum - (b - buf)) < ldata->minimum_to_wake) && ((minimum - (b - buf)) >= 1)) - tty->minimum_to_wake = (minimum - (b - buf)); + ldata->minimum_to_wake = (minimum - (b - buf)); if (!input_available_p(tty, 0)) { if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) { @@ -1881,7 +1882,6 @@ do_it_again: retval = -ERESTARTSYS; break; } - /* FIXME: does n_tty_set_room need locking ? */ n_tty_set_room(tty); timeout = schedule_timeout(timeout); continue; @@ -1979,7 +1979,7 @@ do_it_again: remove_wait_queue(&tty->read_wait, &wait); if (!waitqueue_active(&tty->read_wait)) - tty->minimum_to_wake = minimum; + ldata->minimum_to_wake = minimum; __set_current_state(TASK_RUNNING); size = b - buf; @@ -2045,7 +2045,7 @@ static ssize_t n_tty_write(struct tty_struct *tty, struct file *file, retval = -EIO; break; } - if (O_OPOST(tty) && !(test_bit(TTY_HW_COOK_OUT, &tty->flags))) { + if (O_OPOST(tty)) { while (nr > 0) { ssize_t num = process_output_block(tty, b, nr); if (num < 0) { @@ -2111,6 +2111,7 @@ break_out: static unsigned int n_tty_poll(struct tty_struct *tty, struct file *file, poll_table *wait) { + struct n_tty_data *ldata = tty->disc_data; unsigned int mask = 0; poll_wait(file, &tty->read_wait, wait); @@ -2125,9 +2126,9 @@ static unsigned int n_tty_poll(struct tty_struct *tty, struct file *file, mask |= POLLHUP; if (!(mask & (POLLHUP | POLLIN | POLLRDNORM))) { if (MIN_CHAR(tty) && !TIME_CHAR(tty)) - tty->minimum_to_wake = MIN_CHAR(tty); + ldata->minimum_to_wake = MIN_CHAR(tty); else - tty->minimum_to_wake = 1; + ldata->minimum_to_wake = 1; } if (tty->ops->write && !tty_is_writelocked(tty) && tty_chars_in_buffer(tty) < WAKEUP_CHARS && @@ -2175,6 +2176,18 @@ static int n_tty_ioctl(struct tty_struct *tty, struct file *file, } } +static void n_tty_fasync(struct tty_struct *tty, int on) +{ + struct n_tty_data *ldata = tty->disc_data; + + if (!waitqueue_active(&tty->read_wait)) { + if (on) + ldata->minimum_to_wake = 1; + else if (!tty->fasync) + ldata->minimum_to_wake = N_TTY_BUF_SIZE; + } +} + struct tty_ldisc_ops tty_ldisc_N_TTY = { .magic = TTY_LDISC_MAGIC, .name = "n_tty", @@ -2188,7 +2201,8 @@ struct tty_ldisc_ops tty_ldisc_N_TTY = { .set_termios = n_tty_set_termios, .poll = n_tty_poll, .receive_buf = n_tty_receive_buf, - .write_wakeup = n_tty_write_wakeup + .write_wakeup = n_tty_write_wakeup, + .fasync = n_tty_fasync, }; /** diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c index 59bfaecc4e1..abfd9908978 100644 --- a/drivers/tty/pty.c +++ b/drivers/tty/pty.c @@ -244,14 +244,9 @@ static void pty_flush_buffer(struct tty_struct *tty) static int pty_open(struct tty_struct *tty, struct file *filp) { - int retval = -ENODEV; - if (!tty || !tty->link) - goto out; - - set_bit(TTY_IO_ERROR, &tty->flags); + return -ENODEV; - retval = -EIO; if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) goto out; if (test_bit(TTY_PTY_LOCK, &tty->link->flags)) @@ -262,9 +257,11 @@ static int pty_open(struct tty_struct *tty, struct file *filp) clear_bit(TTY_IO_ERROR, &tty->flags); clear_bit(TTY_OTHER_CLOSED, &tty->link->flags); set_bit(TTY_THROTTLED, &tty->flags); - retval = 0; + return 0; + out: - return retval; + set_bit(TTY_IO_ERROR, &tty->flags); + return -EIO; } static void pty_set_termios(struct tty_struct *tty, diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index 46528d57be7..86c00b1c558 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -2755,7 +2755,7 @@ static void __init serial8250_isa_init_ports(void) if (nr_uarts > UART_NR) nr_uarts = UART_NR; - for (i = 0; i < UART_NR; i++) { + for (i = 0; i < nr_uarts; i++) { struct uart_8250_port *up = &serial8250_ports[i]; struct uart_port *port = &up->port; @@ -2916,7 +2916,7 @@ static int __init serial8250_console_setup(struct console *co, char *options) * if so, search for the first available port that does have * console support. */ - if (co->index >= UART_NR) + if (co->index >= nr_uarts) co->index = 0; port = &serial8250_ports[co->index].port; if (!port->iobase && !port->membase) @@ -2957,7 +2957,7 @@ int serial8250_find_port(struct uart_port *p) int line; struct uart_port *port; - for (line = 0; line < UART_NR; line++) { + for (line = 0; line < nr_uarts; line++) { port = &serial8250_ports[line].port; if (uart_match_port(p, port)) return line; @@ -3110,7 +3110,7 @@ static int serial8250_remove(struct platform_device *dev) { int i; - for (i = 0; i < UART_NR; i++) { + for (i = 0; i < nr_uarts; i++) { struct uart_8250_port *up = &serial8250_ports[i]; if (up->port.dev == &dev->dev) @@ -3178,7 +3178,7 @@ static struct uart_8250_port *serial8250_find_match_or_unused(struct uart_port * /* * First, find a port entry which matches. */ - for (i = 0; i < UART_NR; i++) + for (i = 0; i < nr_uarts; i++) if (uart_match_port(&serial8250_ports[i].port, port)) return &serial8250_ports[i]; @@ -3187,7 +3187,7 @@ static struct uart_8250_port *serial8250_find_match_or_unused(struct uart_port * * free entry. We look for one which hasn't been previously * used (indicated by zero iobase). */ - for (i = 0; i < UART_NR; i++) + for (i = 0; i < nr_uarts; i++) if (serial8250_ports[i].port.type == PORT_UNKNOWN && serial8250_ports[i].port.iobase == 0) return &serial8250_ports[i]; @@ -3196,7 +3196,7 @@ static struct uart_8250_port *serial8250_find_match_or_unused(struct uart_port * * That also failed. Last resort is to find any entry which * doesn't have a real port associated with it. */ - for (i = 0; i < UART_NR; i++) + for (i = 0; i < nr_uarts; i++) if (serial8250_ports[i].port.type == PORT_UNKNOWN) return &serial8250_ports[i]; diff --git a/drivers/tty/serial/8250/8250_gsc.c b/drivers/tty/serial/8250/8250_gsc.c index 097dff9c08a..bb91b4713eb 100644 --- a/drivers/tty/serial/8250/8250_gsc.c +++ b/drivers/tty/serial/8250/8250_gsc.c @@ -30,6 +30,12 @@ static int __init serial_init_chip(struct parisc_device *dev) unsigned long address; int err; +#ifdef CONFIG_64BIT + extern int iosapic_serial_irq(int cellnum); + if (!dev->irq && (dev->id.sversion == 0xad)) + dev->irq = iosapic_serial_irq(dev->mod_index-1); +#endif + if (!dev->irq) { /* We find some unattached serial ports by walking native * busses. These should be silently ignored. Otherwise, @@ -51,7 +57,8 @@ static int __init serial_init_chip(struct parisc_device *dev) memset(&uart, 0, sizeof(uart)); uart.port.iotype = UPIO_MEM; /* 7.272727MHz on Lasi. Assumed the same for Dino, Wax and Timi. */ - uart.port.uartclk = 7272727; + uart.port.uartclk = (dev->id.sversion != 0xad) ? + 7272727 : 1843200; uart.port.mapbase = address; uart.port.membase = ioremap_nocache(address, 16); uart.port.irq = dev->irq; @@ -73,6 +80,7 @@ static struct parisc_device_id serial_tbl[] = { { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00075 }, { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0008c }, { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0008d }, + { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x000ad }, { 0 } }; diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 26e3a97ab15..c52948b368d 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -4797,10 +4797,6 @@ static struct pci_device_id serial_pci_tbl[] = { PCI_VENDOR_ID_IBM, 0x0299, 0, 0, pbn_b0_bt_2_115200 }, - { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9835, - 0x1000, 0x0012, - 0, 0, pbn_b0_bt_2_115200 }, - { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9901, 0xA000, 0x1000, 0, 0, pbn_b0_1_115200 }, diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig index 80fe91e64a5..a1ba94d6488 100644 --- a/drivers/tty/serial/8250/Kconfig +++ b/drivers/tty/serial/8250/Kconfig @@ -12,9 +12,8 @@ config SERIAL_8250 here are those that are setting up dedicated Ethernet WWW/FTP servers, or users that have one of the various bus mice instead of a serial mouse and don't intend to use their machine's standard serial - port for anything. (Note that the Cyclades and Stallion multi - serial port drivers do not need this driver built in for them to - work.) + port for anything. (Note that the Cyclades multi serial port driver + does not need this driver built in for it to work.) To compile this driver as a module, choose M here: the module will be called 8250. diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 7e7006fd404..5e3d68917ff 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -251,7 +251,7 @@ config SERIAL_SAMSUNG_CONSOLE config SERIAL_SIRFSOC tristate "SiRF SoC Platform Serial port support" - depends on ARCH_PRIMA2 + depends on ARCH_SIRF select SERIAL_CORE help Support for the on-chip UART on the CSR SiRFprimaII series, @@ -551,7 +551,7 @@ config BFIN_UART3_CTSRTS Enable hardware flow control in the driver. config SERIAL_IMX - bool "IMX serial port support" + tristate "IMX serial port support" depends on ARCH_MXC select SERIAL_CORE select RATIONAL @@ -561,22 +561,21 @@ config SERIAL_IMX config SERIAL_IMX_CONSOLE bool "Console on IMX serial port" - depends on SERIAL_IMX + depends on SERIAL_IMX=y select SERIAL_CORE_CONSOLE help - If you have enabled the serial port on the Motorola IMX + If you have enabled the serial port on the Freescale IMX CPU you can make it the console by answering Y to this option. Even if you say Y here, the currently visible virtual console (/dev/tty0) will still be used as the system console by default, but you can alter that using a kernel command line option such as - "console=ttySA0". (Try "man bootparam" or see the documentation of - your boot loader (lilo or loadlin) about how to pass options to the - kernel at boot time.) + "console=ttymxc0". (Try "man bootparam" or see the documentation of + your bootloader about how to pass options to the kernel at boot time.) config SERIAL_UARTLITE tristate "Xilinx uartlite serial port support" - depends on PPC32 || MICROBLAZE || MFD_TIMBERDALE + depends on PPC32 || MICROBLAZE || MFD_TIMBERDALE || ARCH_ZYNQ select SERIAL_CORE help Say Y here if you want to use the Xilinx uartlite serial controller. @@ -1484,6 +1483,20 @@ config SERIAL_RP2_NR_UARTS If multiple cards are present, the default limit of 32 ports may need to be increased. +config SERIAL_FSL_LPUART + tristate "Freescale lpuart serial port support" + select SERIAL_CORE + help + Support for the on-chip lpuart on some Freescale SOCs. + +config SERIAL_FSL_LPUART_CONSOLE + bool "Console on Freescale lpuart serial port" + depends on SERIAL_FSL_LPUART=y + select SERIAL_CORE_CONSOLE + help + If you have enabled the lpuart serial port on the Freescale SoCs, + you can make it the console by answering Y to this option. + endmenu endif # TTY diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile index eedfec40e3d..cf650f0cd6e 100644 --- a/drivers/tty/serial/Makefile +++ b/drivers/tty/serial/Makefile @@ -85,3 +85,4 @@ obj-$(CONFIG_SERIAL_AR933X) += ar933x_uart.o obj-$(CONFIG_SERIAL_EFM32_UART) += efm32-uart.o obj-$(CONFIG_SERIAL_ARC) += arc_uart.o obj-$(CONFIG_SERIAL_RP2) += rp2.o +obj-$(CONFIG_SERIAL_FSL_LPUART) += fsl_lpuart.o diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c index 13471dd9579..1d46966e2a6 100644 --- a/drivers/tty/serial/altera_uart.c +++ b/drivers/tty/serial/altera_uart.c @@ -604,7 +604,6 @@ static int altera_uart_remove(struct platform_device *pdev) if (port) { uart_remove_one_port(&altera_uart_driver, port); - platform_set_drvdata(pdev, NULL); port->mapbase = 0; } diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index e2774f9ecd5..28b35ad9c6c 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -79,13 +79,12 @@ struct vendor_data { bool dma_threshold; bool cts_event_workaround; - unsigned int (*get_fifosize)(unsigned int periphid); + unsigned int (*get_fifosize)(struct amba_device *dev); }; -static unsigned int get_fifosize_arm(unsigned int periphid) +static unsigned int get_fifosize_arm(struct amba_device *dev) { - unsigned int rev = (periphid >> 20) & 0xf; - return rev < 3 ? 16 : 32; + return amba_rev(dev) < 3 ? 16 : 32; } static struct vendor_data vendor_arm = { @@ -98,7 +97,7 @@ static struct vendor_data vendor_arm = { .get_fifosize = get_fifosize_arm, }; -static unsigned int get_fifosize_st(unsigned int periphid) +static unsigned int get_fifosize_st(struct amba_device *dev) { return 64; } @@ -151,10 +150,6 @@ struct pl011_dmatx_data { struct uart_amba_port { struct uart_port port; struct clk *clk; - /* Two optional pin states - default & sleep */ - struct pinctrl *pinctrl; - struct pinctrl_state *pins_default; - struct pinctrl_state *pins_sleep; const struct vendor_data *vendor; unsigned int dmacr; /* dma control reg */ unsigned int im; /* interrupt mask */ @@ -1480,12 +1475,7 @@ static int pl011_hwinit(struct uart_port *port) int retval; /* Optionaly enable pins to be muxed in and configured */ - if (!IS_ERR(uap->pins_default)) { - retval = pinctrl_select_state(uap->pinctrl, uap->pins_default); - if (retval) - dev_err(port->dev, - "could not set default pins\n"); - } + pinctrl_pm_select_default_state(port->dev); /* * Try to enable the clock producer. @@ -1611,7 +1601,6 @@ static void pl011_shutdown(struct uart_port *port) { struct uart_amba_port *uap = (struct uart_amba_port *)port; unsigned int cr; - int retval; /* * disable all interrupts @@ -1654,13 +1643,7 @@ static void pl011_shutdown(struct uart_port *port) */ clk_disable_unprepare(uap->clk); /* Optionally let pins go into sleep states */ - if (!IS_ERR(uap->pins_sleep)) { - retval = pinctrl_select_state(uap->pinctrl, uap->pins_sleep); - if (retval) - dev_err(port->dev, - "could not set pins to sleep state\n"); - } - + pinctrl_pm_select_sleep_state(port->dev); if (uap->port.dev->platform_data) { struct amba_pl011_data *plat; @@ -2013,12 +1996,7 @@ static int __init pl011_console_setup(struct console *co, char *options) return -ENODEV; /* Allow pins to be muxed in and configured */ - if (!IS_ERR(uap->pins_default)) { - ret = pinctrl_select_state(uap->pinctrl, uap->pins_default); - if (ret) - dev_err(uap->port.dev, - "could not set default pins\n"); - } + pinctrl_pm_select_default_state(uap->port.dev); ret = clk_prepare(uap->clk); if (ret) @@ -2132,21 +2110,6 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id) goto out; } - uap->pinctrl = devm_pinctrl_get(&dev->dev); - if (IS_ERR(uap->pinctrl)) { - ret = PTR_ERR(uap->pinctrl); - goto out; - } - uap->pins_default = pinctrl_lookup_state(uap->pinctrl, - PINCTRL_STATE_DEFAULT); - if (IS_ERR(uap->pins_default)) - dev_err(&dev->dev, "could not get default pinstate\n"); - - uap->pins_sleep = pinctrl_lookup_state(uap->pinctrl, - PINCTRL_STATE_SLEEP); - if (IS_ERR(uap->pins_sleep)) - dev_dbg(&dev->dev, "could not get sleep pinstate\n"); - uap->clk = devm_clk_get(&dev->dev, NULL); if (IS_ERR(uap->clk)) { ret = PTR_ERR(uap->clk); @@ -2157,7 +2120,7 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id) uap->lcrh_rx = vendor->lcrh_rx; uap->lcrh_tx = vendor->lcrh_tx; uap->old_cr = 0; - uap->fifosize = vendor->get_fifosize(dev->periphid); + uap->fifosize = vendor->get_fifosize(dev); uap->port.dev = &dev->dev; uap->port.mapbase = dev->res.start; uap->port.membase = base; diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 3467462869c..691265faebb 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -1100,7 +1100,7 @@ static void atmel_serial_pm(struct uart_port *port, unsigned int state, * Enable the peripheral clock for this serial port. * This is called on uart_open() or a resume event. */ - clk_enable(atmel_port->clk); + clk_prepare_enable(atmel_port->clk); /* re-enable interrupts if we disabled some on suspend */ UART_PUT_IER(port, atmel_port->backup_imr); @@ -1114,7 +1114,7 @@ static void atmel_serial_pm(struct uart_port *port, unsigned int state, * Disable the peripheral clock for this serial port. * This is called on uart_close() or a suspend event. */ - clk_disable(atmel_port->clk); + clk_disable_unprepare(atmel_port->clk); break; default: printk(KERN_ERR "atmel_serial: unknown pm %d\n", state); @@ -1458,9 +1458,10 @@ static void atmel_of_init_port(struct atmel_uart_port *atmel_port, /* * Configure the port from the platform device resource info. */ -static void atmel_init_port(struct atmel_uart_port *atmel_port, +static int atmel_init_port(struct atmel_uart_port *atmel_port, struct platform_device *pdev) { + int ret; struct uart_port *port = &atmel_port->uart; struct atmel_uart_data *pdata = pdev->dev.platform_data; @@ -1496,9 +1497,19 @@ static void atmel_init_port(struct atmel_uart_port *atmel_port, /* for console, the clock could already be configured */ if (!atmel_port->clk) { atmel_port->clk = clk_get(&pdev->dev, "usart"); - clk_enable(atmel_port->clk); + if (IS_ERR(atmel_port->clk)) { + ret = PTR_ERR(atmel_port->clk); + atmel_port->clk = NULL; + return ret; + } + ret = clk_prepare_enable(atmel_port->clk); + if (ret) { + clk_put(atmel_port->clk); + atmel_port->clk = NULL; + return ret; + } port->uartclk = clk_get_rate(atmel_port->clk); |