diff options
Diffstat (limited to 'drivers/tty/serial')
50 files changed, 1270 insertions, 187 deletions
diff --git a/drivers/tty/serial/21285.c b/drivers/tty/serial/21285.c index d89aa38c5cf..1b37626e8f1 100644 --- a/drivers/tty/serial/21285.c +++ b/drivers/tty/serial/21285.c @@ -1,6 +1,4 @@ /* - * linux/drivers/serial/21285.c - * * Driver for the serial port on the 21285 StrongArm-110 core logic chip. * * Based on drivers/char/serial.c diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c index 6611535f444..b40f7b90c81 100644 --- a/drivers/tty/serial/8250.c +++ b/drivers/tty/serial/8250.c @@ -1,6 +1,4 @@ /* - * linux/drivers/char/8250.c - * * Driver for 8250/16550-type serial ports * * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. @@ -273,7 +271,7 @@ static const struct serial8250_config uart_config[] = { .fifo_size = 32, .tx_loadsz = 32, .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, - .flags = UART_CAP_FIFO | UART_CAP_UUE, + .flags = UART_CAP_FIFO | UART_CAP_UUE | UART_CAP_RTOIE, }, [PORT_RM9000] = { .name = "RM9000", @@ -303,6 +301,14 @@ static const struct serial8250_config uart_config[] = { .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, .flags = UART_CAP_FIFO | UART_CAP_AFE, }, + [PORT_TEGRA] = { + .name = "Tegra", + .fifo_size = 32, + .tx_loadsz = 8, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 | + UART_FCR_T_TRIG_01, + .flags = UART_CAP_FIFO | UART_CAP_RTOIE, + }, }; #if defined(CONFIG_MIPS_ALCHEMY) @@ -1427,6 +1433,27 @@ static void serial8250_enable_ms(struct uart_port *port) serial_out(up, UART_IER, up->ier); } +/* + * Clear the Tegra rx fifo after a break + * + * FIXME: This needs to become a port specific callback once we have a + * framework for this + */ +static void clear_rx_fifo(struct uart_8250_port *up) +{ + unsigned int status, tmout = 10000; + do { + status = serial_in(up, UART_LSR); + if (status & (UART_LSR_FIFOE | UART_LSR_BRK_ERROR_BITS)) + status = serial_in(up, UART_RX); + else + break; + if (--tmout == 0) + break; + udelay(1); + } while (1); +} + static void receive_chars(struct uart_8250_port *up, unsigned int *status) { @@ -1462,6 +1489,13 @@ receive_chars(struct uart_8250_port *up, unsigned int *status) lsr &= ~(UART_LSR_FE | UART_LSR_PE); up->port.icount.brk++; /* + * If tegra port then clear the rx fifo to + * accept another break/character. + */ + if (up->port.type == PORT_TEGRA) + clear_rx_fifo(up); + + /* * We do the SysRQ and SAK checking * here because otherwise the break * may get masked by ignore_status_mask @@ -2405,7 +2439,9 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, UART_ENABLE_MS(&up->port, termios->c_cflag)) up->ier |= UART_IER_MSI; if (up->capabilities & UART_CAP_UUE) - up->ier |= UART_IER_UUE | UART_IER_RTOIE; + up->ier |= UART_IER_UUE; + if (up->capabilities & UART_CAP_RTOIE) + up->ier |= UART_IER_RTOIE; serial_out(up, UART_IER, up->ier); diff --git a/drivers/tty/serial/8250.h b/drivers/tty/serial/8250.h index 6e19ea3e48d..6edf4a6a22d 100644 --- a/drivers/tty/serial/8250.h +++ b/drivers/tty/serial/8250.h @@ -1,6 +1,4 @@ /* - * linux/drivers/char/8250.h - * * Driver for 8250/16550-type serial ports * * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. @@ -44,6 +42,7 @@ struct serial8250_config { #define UART_CAP_SLEEP (1 << 10) /* UART has IER sleep */ #define UART_CAP_AFE (1 << 11) /* MCR-based hw flow control */ #define UART_CAP_UUE (1 << 12) /* UART needs IER bit 6 set (Xscale) */ +#define UART_CAP_RTOIE (1 << 13) /* UART needs IER bit 4 set (Xscale, Tegra) */ #define UART_BUG_QUOT (1 << 0) /* UART has buggy quot LSB */ #define UART_BUG_TXEN (1 << 1) /* UART has buggy TX IIR status */ diff --git a/drivers/tty/serial/8250_accent.c b/drivers/tty/serial/8250_accent.c index 9c10262f246..34b51c65119 100644 --- a/drivers/tty/serial/8250_accent.c +++ b/drivers/tty/serial/8250_accent.c @@ -1,6 +1,4 @@ /* - * linux/drivers/serial/8250_accent.c - * * Copyright (C) 2005 Russell King. * Data taken from include/asm-i386/serial.h * diff --git a/drivers/tty/serial/8250_boca.c b/drivers/tty/serial/8250_boca.c index 3bfe0f7b26f..d125dc10798 100644 --- a/drivers/tty/serial/8250_boca.c +++ b/drivers/tty/serial/8250_boca.c @@ -1,6 +1,4 @@ /* - * linux/drivers/serial/8250_boca.c - * * Copyright (C) 2005 Russell King. * Data taken from include/asm-i386/serial.h * diff --git a/drivers/tty/serial/8250_exar_st16c554.c b/drivers/tty/serial/8250_exar_st16c554.c index 567143ace15..bf53aabf9b5 100644 --- a/drivers/tty/serial/8250_exar_st16c554.c +++ b/drivers/tty/serial/8250_exar_st16c554.c @@ -1,6 +1,4 @@ /* - * linux/drivers/serial/8250_exar.c - * * Written by Paul B Schroeder < pschroeder "at" uplogix "dot" com > * Based on 8250_boca. * diff --git a/drivers/tty/serial/8250_fourport.c b/drivers/tty/serial/8250_fourport.c index 6375d68b791..be158260962 100644 --- a/drivers/tty/serial/8250_fourport.c +++ b/drivers/tty/serial/8250_fourport.c @@ -1,6 +1,4 @@ /* - * linux/drivers/serial/8250_fourport.c - * * Copyright (C) 2005 Russell King. * Data taken from include/asm-i386/serial.h * diff --git a/drivers/tty/serial/8250_hub6.c b/drivers/tty/serial/8250_hub6.c index 7609150e7d5..a5c778e83de 100644 --- a/drivers/tty/serial/8250_hub6.c +++ b/drivers/tty/serial/8250_hub6.c @@ -1,6 +1,4 @@ /* - * linux/drivers/serial/8250_hub6.c - * * Copyright (C) 2005 Russell King. * Data taken from include/asm-i386/serial.h * diff --git a/drivers/tty/serial/8250_mca.c b/drivers/tty/serial/8250_mca.c index d10be944ad4..d20abf04541 100644 --- a/drivers/tty/serial/8250_mca.c +++ b/drivers/tty/serial/8250_mca.c @@ -1,6 +1,4 @@ /* - * linux/drivers/serial/8250_mca.c - * * Copyright (C) 2005 Russell King. * Data taken from include/asm-i386/serial.h * diff --git a/drivers/tty/serial/8250_pci.c b/drivers/tty/serial/8250_pci.c index 738cec9807d..4b4968a294b 100644 --- a/drivers/tty/serial/8250_pci.c +++ b/drivers/tty/serial/8250_pci.c @@ -1,6 +1,4 @@ /* - * linux/drivers/char/8250_pci.c - * * Probe module for 8250/16550-type PCI serial ports. * * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. @@ -973,6 +971,14 @@ ce4100_serial_setup(struct serial_private *priv, return ret; } +static int +pci_omegapci_setup(struct serial_private *priv, + struct pciserial_board *board, + struct uart_port *port, int idx) +{ + return setup_port(priv, port, 2, idx * 8, 0); +} + static int skip_tx_en_setup(struct serial_private *priv, const struct pciserial_board *board, struct uart_port *port, int idx) @@ -1012,6 +1018,8 @@ static int skip_tx_en_setup(struct serial_private *priv, #define PCI_DEVICE_ID_TITAN_200EI 0xA016 #define PCI_DEVICE_ID_TITAN_200EISI 0xA017 #define PCI_DEVICE_ID_OXSEMI_16PCI958 0x9538 +#define PCIE_DEVICE_ID_NEO_2_OX_IBM 0x00F6 +#define PCI_DEVICE_ID_PLX_CRONYX_OMEGA 0xc001 /* Unknown vendors/cards - this should not be in linux/pci_ids.h */ #define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584 @@ -1412,7 +1420,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .setup = pci_default_setup, }, /* - * For Oxford Semiconductor and Mainpine + * For Oxford Semiconductor Tornado based devices */ { .vendor = PCI_VENDOR_ID_OXSEMI, @@ -1430,6 +1438,24 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .init = pci_oxsemi_tornado_init, .setup = pci_default_setup, }, + { + .vendor = PCI_VENDOR_ID_DIGI, + .device = PCIE_DEVICE_ID_NEO_2_OX_IBM, + .subvendor = PCI_SUBVENDOR_ID_IBM, + .subdevice = PCI_ANY_ID, + .init = pci_oxsemi_tornado_init, + .setup = pci_default_setup, + }, + /* + * Cronyx Omega PCI (PLX-chip based) + */ + { + .vendor = PCI_VENDOR_ID_PLX, + .device = PCI_DEVICE_ID_PLX_CRONYX_OMEGA, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_omegapci_setup, + }, /* * Default "match everything" terminator entry */ @@ -1617,6 +1643,7 @@ enum pci_board_num_t { pbn_ADDIDATA_PCIe_4_3906250, pbn_ADDIDATA_PCIe_8_3906250, pbn_ce4100_1_115200, + pbn_omegapci, }; /* @@ -2312,6 +2339,12 @@ static struct pciserial_board pci_boards[] __devinitdata = { .base_baud = 921600, .reg_shift = 2, }, + [pbn_omegapci] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 115200, + .uart_offset = 0x200, + }, }; static const struct pci_device_id softmodem_blacklist[] = { @@ -3075,6 +3108,14 @@ static struct pci_device_id serial_pci_tbl[] = { { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 8 Port V.34 Super-G3 Fax */ PCI_VENDOR_ID_MAINPINE, 0x4008, 0, 0, pbn_oxsemi_8_4000000 }, + + /* + * Digi/IBM PCIe 2-port Async EIA-232 Adapter utilizing OxSemi Tornado + */ + { PCI_VENDOR_ID_DIGI, PCIE_DEVICE_ID_NEO_2_OX_IBM, + PCI_SUBVENDOR_ID_IBM, PCI_ANY_ID, 0, 0, + pbn_oxsemi_2_4000000 }, + /* * SBS Technologies, Inc. P-Octal and PMC-OCTPRO cards, * from skokodyn@yahoo.com @@ -3801,6 +3842,12 @@ static struct pci_device_id serial_pci_tbl[] = { PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_ce4100_1_115200 }, + /* + * Cronyx Omega PCI + */ + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_CRONYX_OMEGA, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_omegapci }, /* * These entries match devices with class COMMUNICATION_SERIAL, diff --git a/drivers/tty/serial/8250_pnp.c b/drivers/tty/serial/8250_pnp.c index 4822cb50cd0..fc301f6722e 100644 --- a/drivers/tty/serial/8250_pnp.c +++ b/drivers/tty/serial/8250_pnp.c @@ -1,6 +1,4 @@ /* - * linux/drivers/char/8250_pnp.c - * * Probe module for 8250/16550-type ISAPNP serial ports. * * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index b1f0f83b870..636144cea93 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -537,7 +537,7 @@ config SERIAL_S3C6400 config SERIAL_S5PV210 tristate "Samsung S5PV210 Serial port support" - depends on SERIAL_SAMSUNG && (CPU_S5PV210 || CPU_S5P6442 || CPU_EXYNOS4210) + depends on SERIAL_SAMSUNG && (CPU_S5PV210 || CPU_EXYNOS4210) select SERIAL_SAMSUNG_UARTS_4 if (CPU_S5PV210 || CPU_EXYNOS4210) default y help @@ -1585,7 +1585,7 @@ config SERIAL_IFX6X60 Support for the IFX6x60 modem devices on Intel MID platforms. config SERIAL_PCH_UART - tristate "Intel EG20T PCH UART/OKI SEMICONDUCTOR ML7213 IOH" + tristate "Intel EG20T PCH / OKI SEMICONDUCTOR IOH(ML7213/ML7223) UART" depends on PCI select SERIAL_CORE help @@ -1593,10 +1593,12 @@ config SERIAL_PCH_UART which is an IOH(Input/Output Hub) for x86 embedded processor. Enabling PCH_DMA, this PCH UART works as DMA mode. - This driver also can be used for OKI SEMICONDUCTOR ML7213 IOH(Input/ - Output Hub) which is for IVI(In-Vehicle Infotainment) use. - ML7213 is companion chip for Intel Atom E6xx series. - ML7213 is completely compatible for Intel EG20T PCH. + This driver also can be used for OKI SEMICONDUCTOR IOH(Input/ + Output Hub), ML7213 and ML7223. + ML7213 IOH is for IVI(In-Vehicle Infotainment) use and ML7223 IOH is + for MP(Media Phone) use. + ML7213/ML7223 is companion chip for Intel Atom E6xx series. + ML7213/ML7223 is completely compatible for Intel EG20T PCH. config SERIAL_MSM_SMD bool "Enable tty device interface for some SMD ports" @@ -1620,4 +1622,17 @@ config SERIAL_MXS_AUART_CONSOLE help Enable a MXS AUART port to be the system console. +config SERIAL_XILINX_PS_UART + tristate "Xilinx PS UART support" + select SERIAL_CORE + help + This driver supports the Xilinx PS UART port. + +config SERIAL_XILINX_PS_UART_CONSOLE + bool "Xilinx PS UART console support" + depends on SERIAL_XILINX_PS_UART=y + select SERIAL_CORE_CONSOLE + help + Enable a Xilinx PS UART port to be the system console. + endmenu diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile index 35276043d9d..cb2628fee4c 100644 --- a/drivers/tty/serial/Makefile +++ b/drivers/tty/serial/Makefile @@ -95,3 +95,4 @@ obj-$(CONFIG_SERIAL_PCH_UART) += pch_uart.o obj-$(CONFIG_SERIAL_MSM_SMD) += msm_smd_tty.o obj-$(CONFIG_SERIAL_MXS_AUART) += mxs-auart.o obj-$(CONFIG_SERIAL_LANTIQ) += lantiq.o +obj-$(CONFIG_SERIAL_XILINX_PS_UART) += xilinx_uartps.o diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c index 6d5b036ac78..50bc5a5ac65 100644 --- a/drivers/tty/serial/altera_uart.c +++ b/drivers/tty/serial/altera_uart.c @@ -540,11 +540,14 @@ static int __devinit altera_uart_probe(struct platform_device *pdev) int i = pdev->id; int ret; - /* -1 emphasizes that the platform must have one port, no .N suffix */ - if (i == -1) - i = 0; + /* if id is -1 scan for a free id and use that one */ + if (i == -1) { + for (i = 0; i < CONFIG_SERIAL_ALTERA_UART_MAXPORTS; i++) + if (altera_uart_ports[i].port.mapbase == 0) + break; + } - if (i >= CONFIG_SERIAL_ALTERA_UART_MAXPORTS) + if (i < 0 || i >= CONFIG_SERIAL_ALTERA_UART_MAXPORTS) return -EINVAL; port = &altera_uart_ports[i].port; @@ -587,6 +590,8 @@ static int __devinit altera_uart_probe(struct platform_device *pdev) port->ops = &altera_uart_ops; port->flags = UPF_BOOT_AUTOCONF; + dev_set_drvdata(&pdev->dev, port); + uart_add_one_port(&altera_uart_driver, port); return 0; @@ -594,14 +599,13 @@ static int __devinit altera_uart_probe(struct platform_device *pdev) static int __devexit altera_uart_remove(struct platform_device *pdev) { - struct uart_port *port; - int i = pdev->id; + struct uart_port *port = dev_get_drvdata(&pdev->dev); - if (i == -1) - i = 0; - - port = &altera_uart_ports[i].port; - uart_remove_one_port(&altera_uart_driver, port); + if (port) { + uart_remove_one_port(&altera_uart_driver, port); + dev_set_drvdata(&pdev->dev, NULL); + port->mapbase = 0; + } return 0; } diff --git a/drivers/tty/serial/amba-pl010.c b/drivers/tty/serial/amba-pl010.c index d742dd2c525..c0d10c4ddb7 100644 --- a/drivers/tty/serial/amba-pl010.c +++ b/drivers/tty/serial/amba-pl010.c @@ -1,6 +1,4 @@ /* - * linux/drivers/char/amba.c - * * Driver for AMBA serial ports * * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 6deee4e546b..8dc0541feec 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -1,6 +1,4 @@ /* - * linux/drivers/char/amba.c - * * Driver for AMBA serial ports * * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index f119d176110..652bdac8ce8 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -1,6 +1,4 @@ /* - * linux/drivers/char/atmel_serial.c - * * Driver for Atmel AT91 / AT32 Serial ports * Copyright (C) 2003 Rick Bronson * diff --git a/drivers/tty/serial/clps711x.c b/drivers/tty/serial/clps711x.c index b6acd19b458..e6c3dbd781d 100644 --- a/drivers/tty/serial/clps711x.c +++ b/drivers/tty/serial/clps711x.c @@ -1,6 +1,4 @@ /* - * linux/drivers/char/clps711x.c - * * Driver for CLPS711x serial ports * * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. diff --git a/drivers/tty/serial/cpm_uart/cpm_uart.h b/drivers/tty/serial/cpm_uart/cpm_uart.h index b754dcf0fda..cf34d26ff6c 100644 --- a/drivers/tty/serial/cpm_uart/cpm_uart.h +++ b/drivers/tty/serial/cpm_uart/cpm_uart.h @@ -1,6 +1,4 @@ /* - * linux/drivers/serial/cpm_uart.h - * * Driver for CPM (SCC/SMC) serial ports * * Copyright (C) 2004 Freescale Semiconductor, Inc. diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c index a9a6a5fd169..9488da74d4f 100644 --- a/drivers/tty/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c @@ -1,6 +1,4 @@ /* - * linux/drivers/serial/cpm_uart.c - * * Driver for CPM (SCC/SMC) serial ports; core driver * * Based on arch/ppc/cpm2_io/uart.c by Dan Malek diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/tty/serial/cpm_uart/cpm_uart_cpm1.c index 3fc1d66e32c..18f79575894 100644 --- a/drivers/tty/serial/cpm_uart/cpm_uart_cpm1.c +++ b/drivers/tty/serial/cpm_uart/cpm_uart_cpm1.c @@ -1,6 +1,4 @@ /* - * linux/drivers/serial/cpm_uart.c - * * Driver for CPM (SCC/SMC) serial ports; CPM1 definitions * * Maintainer: Kumar Gala (galak@kernel.crashing.org) (CPM2) diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_cpm1.h b/drivers/tty/serial/cpm_uart/cpm_uart_cpm1.h index 10eecd6af6d..60c7e94cde1 100644 --- a/drivers/tty/serial/cpm_uart/cpm_uart_cpm1.h +++ b/drivers/tty/serial/cpm_uart/cpm_uart_cpm1.h @@ -1,6 +1,4 @@ /* - * linux/drivers/serial/cpm_uart/cpm_uart_cpm1.h - * * Driver for CPM (SCC/SMC) serial ports * * definitions for cpm1 diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c index 814ac006393..a4927e66e74 100644 --- a/drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c +++ b/drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c @@ -1,6 +1,4 @@ /* - * linux/drivers/serial/cpm_uart_cpm2.c - * * Driver for CPM (SCC/SMC) serial ports; CPM2 definitions * * Maintainer: Kumar Gala (galak@kernel.crashing.org) (CPM2) diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_cpm2.h b/drivers/tty/serial/cpm_uart/cpm_uart_cpm2.h index 7194c63dcf5..51e651a6993 100644 --- a/drivers/tty/serial/cpm_uart/cpm_uart_cpm2.h +++ b/drivers/tty/serial/cpm_uart/cpm_uart_cpm2.h @@ -1,6 +1,4 @@ /* - * linux/drivers/serial/cpm_uart/cpm_uart_cpm2.h - * * Driver for CPM (SCC/SMC) serial ports * * definitions for cpm2 diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c index 8ee5a41d340..5315525220f 100644 --- a/drivers/tty/serial/ifx6x60.c +++ b/drivers/tty/serial/ifx6x60.c @@ -41,7 +41,6 @@ #include <linux/tty.h> #include <linux/device.h> #include <linux/spi/spi.h> -#include <linux/tty.h> #include <linux/kfifo.h> #include <linux/tty_flip.h> #include <linux/timer.h> @@ -56,7 +55,6 @@ #include <linux/sched.h> #include <linux/time.h> #include <linux/wait.h> -#include <linux/tty.h> #include <linux/pm.h> #include <linux/pm_runtime.h> #include <linux/spi/ifx_modem.h> diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 62df72d9f0a..a54473123e0 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -1,6 +1,4 @@ /* - * linux/drivers/serial/imx.c - * * Driver for Motorola IMX serial ports * * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c index bfee9b4c666..e6ba8387650 100644 --- a/drivers/tty/serial/msm_serial.c +++ b/drivers/tty/serial/msm_serial.c @@ -1,5 +1,5 @@ /* - * drivers/serial/msm_serial.c - driver for msm7k serial device and console + * Driver for msm7k serial device and console * * Copyright (C) 2007 Google, Inc. * Author: Robert Love <rlove@google.com> diff --git a/drivers/tty/serial/msm_serial.h b/drivers/tty/serial/msm_serial.h index 9b8dc5d0d85..e4acef5de77 100644 --- a/drivers/tty/serial/msm_serial.h +++ b/drivers/tty/serial/msm_serial.h @@ -1,6 +1,4 @@ /* - * drivers/serial/msm_serial.h - * * Copyright (C) 2007 Google, Inc. * Author: Robert Love <rlove@google.com> * Copyright (c) 2011, Code Aurora Forum. All rights reserved. diff --git a/drivers/tty/serial/msm_smd_tty.c b/drivers/tty/serial/msm_smd_tty.c index beeff1e8609..4f41dcdcb77 100644 --- a/drivers/tty/serial/msm_smd_tty.c +++ b/drivers/tty/serial/msm_smd_tty.c @@ -1,5 +1,4 @@ -/* drivers/tty/serial/msm_smd_tty.c - * +/* * Copyright (C) 2007 Google, Inc. * Copyright (c) 2011, Code Aurora Forum. All rights reserved. * Author: Brian Swetland <swetland@google.com> diff --git a/drivers/tty/serial/netx-serial.c b/drivers/tty/serial/netx-serial.c index 7735c9f35fa.. |