aboutsummaryrefslogtreecommitdiff
path: root/drivers/spi/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/spi/Kconfig')
-rw-r--r--drivers/spi/Kconfig48
1 files changed, 4 insertions, 44 deletions
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index de35c3ad8a6..52e2900d9d8 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -86,9 +86,6 @@ config SPI_BFIN_SPORT
help
Enable support for a SPI bus via the Blackfin SPORT peripheral.
- This driver can also be built as a module. If so, the module
- will be called spi_bfin_sport.
-
config SPI_AU1550
tristate "Au1550/Au12x0 SPI Controller"
depends on (SOC_AU1550 || SOC_AU1200) && EXPERIMENTAL
@@ -97,9 +94,6 @@ config SPI_AU1550
If you say yes to this option, support will be included for the
Au1550 SPI controller (may also work with Au1200,Au1210,Au1250).
- This driver can also be built as a module. If so, the module
- will be called au1550_spi.
-
config SPI_BITBANG
tristate "Utilities for Bitbanging SPI masters"
help
@@ -130,9 +124,6 @@ config SPI_COLDFIRE_QSPI
This enables support for the Coldfire QSPI controller in master
mode.
- This driver can also be built as a module. If so, the module
- will be called coldfire_qspi.
-
config SPI_DAVINCI
tristate "Texas Instruments DaVinci/DA8x/OMAP-L/AM1x SoC SPI controller"
depends on SPI_MASTER && ARCH_DAVINCI
@@ -140,9 +131,6 @@ config SPI_DAVINCI
help
SPI master controller for DaVinci/DA8x/OMAP-L/AM1x SPI modules.
- This driver can also be built as a module. The module will be called
- davinci_spi.
-
config SPI_EP93XX
tristate "Cirrus Logic EP93xx SPI controller"
depends on ARCH_EP93XX
@@ -150,9 +138,6 @@ config SPI_EP93XX
This enables using the Cirrus EP93xx SPI controller in master
mode.
- To compile this driver as a module, choose M here. The module will be
- called ep93xx_spi.
-
config SPI_GPIO
tristate "GPIO-based bitbanging SPI Master"
depends on GENERIC_GPIO
@@ -169,21 +154,6 @@ config SPI_GPIO
GPIO operations, you should be able to leverage that for better
speed with a custom version of this driver; see the source code.
-config SPI_IMX_VER_IMX1
- def_bool y if SOC_IMX1
-
-config SPI_IMX_VER_0_0
- def_bool y if SOC_IMX21 || SOC_IMX27
-
-config SPI_IMX_VER_0_4
- def_bool y if SOC_IMX31
-
-config SPI_IMX_VER_0_7
- def_bool y if ARCH_MX25 || SOC_IMX35 || SOC_IMX51 || SOC_IMX53
-
-config SPI_IMX_VER_2_3
- def_bool y if SOC_IMX51 || SOC_IMX53
-
config SPI_IMX
tristate "Freescale i.MX SPI controllers"
depends on ARCH_MXC
@@ -328,16 +298,6 @@ config SPI_S3C24XX_FIQ
no free DMA channels, or when doing transfers that required both
TX and RX data paths.
-config SPI_S3C24XX_GPIO
- tristate "Samsung S3C24XX series SPI by GPIO"
- depends on ARCH_S3C2410 && EXPERIMENTAL
- select SPI_BITBANG
- help
- SPI driver for Samsung S3C24XX series ARM SoCs using
- GPIO lines to provide the SPI bus. This can be used where
- the inbuilt hardware cannot provide the transfer mode, or
- where the board is using non hardware connected pins.
-
config SPI_S3C64XX
tristate "Samsung S3C64XX series type SPI"
depends on (ARCH_S3C64XX || ARCH_S5P64X0)
@@ -385,16 +345,16 @@ config SPI_TI_SSP
This selects an SPI master implementation using a TI sequencer
serial port.
- To compile this driver as a module, choose M here: the
- module will be called ti-ssp-spi.
-
config SPI_TOPCLIFF_PCH
- tristate "Topcliff PCH SPI Controller"
+ tristate "Intel EG20T PCH/OKI SEMICONDUCTOR ML7213 IOH SPI controller"
depends on PCI
help
SPI driver for the Topcliff PCH (Platform Controller Hub) SPI bus
used in some x86 embedded processors.
+ This driver also supports the ML7213, a companion chip for the
+ Atom E6xx series and compatible with the Intel EG20T PCH.
+
config SPI_TXX9
tristate "Toshiba TXx9 SPI controller"
depends on GENERIC_GPIO && CPU_TX49XX