diff options
Diffstat (limited to 'drivers/serial')
| -rw-r--r-- | drivers/serial/8250.c | 15 | ||||
| -rw-r--r-- | drivers/serial/Kconfig | 12 | ||||
| -rw-r--r-- | drivers/serial/mpc52xx_uart.c | 251 | ||||
| -rw-r--r-- | drivers/serial/pmac_zilog.c | 246 | ||||
| -rw-r--r-- | drivers/serial/pmac_zilog.h | 34 | ||||
| -rw-r--r-- | drivers/serial/serial_cs.c | 7 | ||||
| -rw-r--r-- | drivers/serial/sh-sci.h | 220 |
7 files changed, 459 insertions, 326 deletions
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index e9b15c3746f..a81ff7bc5fa 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -1217,12 +1217,6 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags) } #endif -#ifdef CONFIG_SERIAL_8250_AU1X00 - /* if access method is AU, it is a 16550 with a quirk */ - if (up->port.type == PORT_16550A && up->port.iotype == UPIO_AU) - up->bugs |= UART_BUG_NOMSR; -#endif - serial_outp(up, UART_LCR, save_lcr); if (up->capabilities != uart_config[up->port.type].flags) { @@ -2428,7 +2422,7 @@ serial8250_pm(struct uart_port *port, unsigned int state, static unsigned int serial8250_port_size(struct uart_8250_port *pt) { if (pt->port.iotype == UPIO_AU) - return 0x100000; + return 0x1000; #ifdef CONFIG_ARCH_OMAP if (is_omap_port(pt)) return 0x16 << pt->port.regshift; @@ -2585,6 +2579,13 @@ static void serial8250_config_port(struct uart_port *port, int flags) if (flags & UART_CONFIG_TYPE) autoconfig(up, probeflags); + +#ifdef CONFIG_SERIAL_8250_AU1X00 + /* if access method is AU, it is a 16550 with a quirk */ + if (up->port.type == PORT_16550A && up->port.iotype == UPIO_AU) + up->bugs |= UART_BUG_NOMSR; +#endif + if (up->port.type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ) autoconfig_irq(up); diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 9ff47db0b2c..888a0ce91c4 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -1086,12 +1086,12 @@ config SERIAL_68360 default y config SERIAL_PMACZILOG - tristate "PowerMac z85c30 ESCC support" - depends on PPC_OF && PPC_PMAC + tristate "Mac or PowerMac z85c30 ESCC support" + depends on (M68K && MAC) || (PPC_OF && PPC_PMAC) select SERIAL_CORE help This driver supports the Zilog z85C30 serial ports found on - PowerMac machines. + (Power)Mac machines. Say Y or M if you want to be able to these serial ports. config SERIAL_PMACZILOG_TTYS @@ -1116,16 +1116,16 @@ config SERIAL_PMACZILOG_TTYS unable to use the 8250 module for PCMCIA or other 16C550-style UARTs. - Say N unless you need the z85c30 ports on your powermac + Say N unless you need the z85c30 ports on your (Power)Mac to appear as /dev/ttySn. config SERIAL_PMACZILOG_CONSOLE - bool "Console on PowerMac z85c30 serial port" + bool "Console on Mac or PowerMac z85c30 serial port" depends on SERIAL_PMACZILOG=y select SERIAL_CORE_CONSOLE help If you would like to be able to use the z85c30 serial port - on your PowerMac as the console, you can do so by answering + on your (Power)Mac as the console, you can do so by answering Y to this option. config SERIAL_LH7A40X diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c index 7ce9e9f567a..3119fddaedb 100644 --- a/drivers/serial/mpc52xx_uart.c +++ b/drivers/serial/mpc52xx_uart.c @@ -74,6 +74,7 @@ #include <linux/io.h> #include <linux/of.h> #include <linux/of_platform.h> +#include <linux/clk.h> #include <asm/mpc52xx.h> #include <asm/mpc52xx_psc.h> @@ -113,6 +114,7 @@ static void mpc52xx_uart_of_enumerate(void); /* Forward declaration of the interruption handling routine */ static irqreturn_t mpc52xx_uart_int(int irq, void *dev_id); +static irqreturn_t mpc5xxx_uart_process_int(struct uart_port *port); /* Simple macro to test if a port is console or not. This one is taken @@ -145,6 +147,11 @@ struct psc_ops { void (*cw_disable_ints)(struct uart_port *port); void (*cw_restore_ints)(struct uart_port *port); unsigned long (*getuartclk)(void *p); + int (*clock)(struct uart_port *port, int enable); + int (*fifoc_init)(void); + void (*fifoc_uninit)(void); + void (*get_irq)(struct uart_port *, struct device_node *); + irqreturn_t (*handle_irq)(struct uart_port *port); }; #ifdef CONFIG_PPC_MPC52xx @@ -256,6 +263,18 @@ static unsigned long mpc52xx_getuartclk(void *p) return mpc5xxx_get_bus_frequency(p) / 2; } +static void mpc52xx_psc_get_irq(struct uart_port *port, struct device_node *np) +{ + port->irqflags = IRQF_DISABLED; + port->irq = irq_of_parse_and_map(np, 0); +} + +/* 52xx specific interrupt handler. The caller holds the port lock */ +static irqreturn_t mpc52xx_psc_handle_irq(struct uart_port *port) +{ + return mpc5xxx_uart_process_int(port); +} + static struct psc_ops mpc52xx_psc_ops = { .fifo_init = mpc52xx_psc_fifo_init, .raw_rx_rdy = mpc52xx_psc_raw_rx_rdy, @@ -273,14 +292,32 @@ static struct psc_ops mpc52xx_psc_ops = { .cw_disable_ints = mpc52xx_psc_cw_disable_ints, .cw_restore_ints = mpc52xx_psc_cw_restore_ints, .getuartclk = mpc52xx_getuartclk, + .get_irq = mpc52xx_psc_get_irq, + .handle_irq = mpc52xx_psc_handle_irq, }; #endif /* CONFIG_MPC52xx */ #ifdef CONFIG_PPC_MPC512x #define FIFO_512x(port) ((struct mpc512x_psc_fifo __iomem *)(PSC(port)+1)) + +/* PSC FIFO Controller for mpc512x */ +struct psc_fifoc { + u32 fifoc_cmd; + u32 fifoc_int; + u32 fifoc_dma; + u32 fifoc_axe; + u32 fifoc_debug; +}; + +static struct psc_fifoc __iomem *psc_fifoc; +static unsigned int psc_fifoc_irq; + static void mpc512x_psc_fifo_init(struct uart_port *port) { + /* /32 prescaler */ + out_be16(&PSC(port)->mpc52xx_psc_clock_select, 0xdd00); + out_be32(&FIFO_512x(port)->txcmd, MPC512x_PSC_FIFO_RESET_SLICE); out_be32(&FIFO_512x(port)->txcmd, MPC512x_PSC_FIFO_ENABLE_SLICE); out_be32(&FIFO_512x(port)->txalarm, 1); @@ -393,6 +430,160 @@ static unsigned long mpc512x_getuartclk(void *p) return mpc5xxx_get_bus_frequency(p); } +#define DEFAULT_FIFO_SIZE 16 + +static unsigned int __init get_fifo_size(struct device_node *np, + char *fifo_name) +{ + const unsigned int *fp; + + fp = of_get_property(np, fifo_name, NULL); + if (fp) + return *fp; + + pr_warning("no %s property in %s node, defaulting to %d\n", + fifo_name, np->full_name, DEFAULT_FIFO_SIZE); + + return DEFAULT_FIFO_SIZE; +} + +#define FIFOC(_base) ((struct mpc512x_psc_fifo __iomem *) \ + ((u32)(_base) + sizeof(struct mpc52xx_psc))) + +/* Init PSC FIFO Controller */ +static int __init mpc512x_psc_fifoc_init(void) +{ + struct device_node *np; + void __iomem *psc; + unsigned int tx_fifo_size; + unsigned int rx_fifo_size; + int fifobase = 0; /* current fifo address in 32 bit words */ + + np = of_find_compatible_node(NULL, NULL, + "fsl,mpc5121-psc-fifo"); + if (!np) { + pr_err("%s: Can't find FIFOC node\n", __func__); + return -ENODEV; + } + + psc_fifoc = of_iomap(np, 0); + if (!psc_fifoc) { + pr_err("%s: Can't map FIFOC\n", __func__); + return -ENODEV; + } + + psc_fifoc_irq = irq_of_parse_and_map(np, 0); + of_node_put(np); + if (psc_fifoc_irq == NO_IRQ) { + pr_err("%s: Can't get FIFOC irq\n", __func__); + iounmap(psc_fifoc); + return -ENODEV; + } + + for_each_compatible_node(np, NULL, "fsl,mpc5121-psc-uart") { + tx_fifo_size = get_fifo_size(np, "fsl,tx-fifo-size"); + rx_fifo_size = get_fifo_size(np, "fsl,rx-fifo-size"); + + /* size in register is in 4 byte units */ + tx_fifo_size /= 4; + rx_fifo_size /= 4; + if (!tx_fifo_size) + tx_fifo_size = 1; + if (!rx_fifo_size) + rx_fifo_size = 1; + + psc = of_iomap(np, 0); + if (!psc) { + pr_err("%s: Can't map %s device\n", + __func__, np->full_name); + continue; + } + + /* FIFO space is 4KiB, check if requested size is available */ + if ((fifobase + tx_fifo_size + rx_fifo_size) > 0x1000) { + pr_err("%s: no fifo space available for %s\n", + __func__, np->full_name); + iounmap(psc); + /* + * chances are that another device requests less + * fifo space, so we continue. + */ + continue; + } + /* set tx and rx fifo size registers */ + out_be32(&FIFOC(psc)->txsz, (fifobase << 16) | tx_fifo_size); + fifobase += tx_fifo_size; + out_be32(&FIFOC(psc)->rxsz, (fifobase << 16) | rx_fifo_size); + fifobase += rx_fifo_size; + + /* reset and enable the slices */ + out_be32(&FIFOC(psc)->txcmd, 0x80); + out_be32(&FIFOC(psc)->txcmd, 0x01); + out_be32(&FIFOC(psc)->rxcmd, 0x80); + out_be32(&FIFOC(psc)->rxcmd, 0x01); + + iounmap(psc); + } + + return 0; +} + +static void __exit mpc512x_psc_fifoc_uninit(void) +{ + iounmap(psc_fifoc); +} + +/* 512x specific interrupt handler. The caller holds the port lock */ +static irqreturn_t mpc512x_psc_handle_irq(struct uart_port *port) +{ + unsigned long fifoc_int; + int psc_num; + + /* Read pending PSC FIFOC interrupts */ + fifoc_int = in_be32(&psc_fifoc->fifoc_int); + + /* Check if it is an interrupt for this port */ + psc_num = (port->mapbase & 0xf00) >> 8; + if (test_bit(psc_num, &fifoc_int) || + test_bit(psc_num + 16, &fifoc_int)) + return mpc5xxx_uart_process_int(port); + + return IRQ_NONE; +} + +static int mpc512x_psc_clock(struct uart_port *port, int enable) +{ + struct clk *psc_clk; + int psc_num; + char clk_name[10]; + + if (uart_console(port)) + return 0; + + psc_num = (port->mapbase & 0xf00) >> 8; + snprintf(clk_name, sizeof(clk_name), "psc%d_clk", psc_num); + psc_clk = clk_get(port->dev, clk_name); + if (IS_ERR(psc_clk)) { + dev_err(port->dev, "Failed to get PSC clock entry!\n"); + return -ENODEV; + } + + dev_dbg(port->dev, "%s %sable\n", clk_name, enable ? "en" : "dis"); + + if (enable) + clk_enable(psc_clk); + else + clk_disable(psc_clk); + + return 0; +} + +static void mpc512x_psc_get_irq(struct uart_port *port, struct device_node *np) +{ + port->irqflags = IRQF_SHARED; + port->irq = psc_fifoc_irq; +} + static struct psc_ops mpc512x_psc_ops = { .fifo_init = mpc512x_psc_fifo_init, .raw_rx_rdy = mpc512x_psc_raw_rx_rdy, @@ -410,6 +601,11 @@ static struct psc_ops mpc512x_psc_ops = { .cw_disable_ints = mpc512x_psc_cw_disable_ints, .cw_restore_ints = mpc512x_psc_cw_restore_ints, .getuartclk = mpc512x_getuartclk, + .clock = mpc512x_psc_clock, + .fifoc_init = mpc512x_psc_fifoc_init, + .fifoc_uninit = mpc512x_psc_fifoc_uninit, + .get_irq = mpc512x_psc_get_irq, + .handle_irq = mpc512x_psc_handle_irq, }; #endif @@ -519,10 +715,15 @@ mpc52xx_uart_startup(struct uart_port *port) struct mpc52xx_psc __iomem *psc = PSC(port); int ret; + if (psc_ops->clock) { + ret = psc_ops->clock(port, 1); + if (ret) + return ret; + } + /* Request IRQ */ ret = request_irq(port->irq, mpc52xx_uart_int, - IRQF_DISABLED | IRQF_SAMPLE_RANDOM, - "mpc52xx_psc_uart", port); + port->irqflags, "mpc52xx_psc_uart", port); if (ret) return ret; @@ -553,6 +754,9 @@ mpc52xx_uart_shutdown(struct uart_port *port) port->read_status_mask = 0; out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask); + if (psc_ops->clock) + psc_ops->clock(port, 0); + /* Release interrupt */ free_irq(port->irq, port); } @@ -851,15 +1055,12 @@ mpc52xx_uart_int_tx_chars(struct uart_port *port) } static irqreturn_t -mpc52xx_uart_int(int irq, void *dev_id) +mpc5xxx_uart_process_int(struct uart_port *port) { - struct uart_port *port = dev_id; unsigned long pass = ISR_PASS_LIMIT; unsigned int keepgoing; u8 status; - spin_lock(&port->lock); - /* While we have stuff to do, we continue */ do { /* If we don't find anything to do, we stop */ @@ -886,11 +1087,23 @@ mpc52xx_uart_int(int irq, void *dev_id) } while (keepgoing); - spin_unlock(&port->lock); - return IRQ_HANDLED; } +static irqreturn_t +mpc52xx_uart_int(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + irqreturn_t ret; + + spin_lock(&port->lock); + + ret = psc_ops->handle_irq(port); + + spin_unlock(&port->lock); + + return ret; +} /* ======================================================================== */ /* Console ( if applicable ) */ @@ -1152,7 +1365,7 @@ mpc52xx_uart_of_probe(struct of_device *op, const struct of_device_id *match) return -EINVAL; } - port->irq = irq_of_parse_and_map(op->node, 0); + psc_ops->get_irq(port, op->node); if (port->irq == NO_IRQ) { dev_dbg(&op->dev, "Could not get irq\n"); return -EINVAL; @@ -1163,10 +1376,8 @@ mpc52xx_uart_of_probe(struct of_device *op, const struct of_device_id *match) /* Add the port to the uart sub-system */ ret = uart_add_one_port(&mpc52xx_uart_driver, port); - if (ret) { - irq_dispose_mapping(port->irq); + if (ret) return ret; - } dev_set_drvdata(&op->dev, (void *)port); return 0; @@ -1178,10 +1389,8 @@ mpc52xx_uart_of_remove(struct of_device *op) struct uart_port *port = dev_get_drvdata(&op->dev); dev_set_drvdata(&op->dev, NULL); - if (port) { + if (port) uart_remove_one_port(&mpc52xx_uart_driver, port); - irq_dispose_mapping(port->irq); - } return 0; } @@ -1288,6 +1497,15 @@ mpc52xx_uart_init(void) mpc52xx_uart_of_enumerate(); + /* + * Map the PSC FIFO Controller and init if on MPC512x. + */ + if (psc_ops->fifoc_init) { + ret = psc_ops->fifoc_init(); + if (ret) + return ret; + } + ret = of_register_platform_driver(&mpc52xx_uart_of_driver); if (ret) { printk(KERN_ERR "%s: of_register_platform_driver failed (%i)\n", @@ -1302,6 +1520,9 @@ mpc52xx_uart_init(void) static void __exit mpc52xx_uart_exit(void) { + if (psc_ops->fifoc_uninit) + psc_ops->fifoc_uninit(); + of_unregister_platform_driver(&mpc52xx_uart_of_driver); uart_unregister_driver(&mpc52xx_uart_driver); } diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c index 683e66f18e8..f020de1cdd5 100644 --- a/drivers/serial/pmac_zilog.c +++ b/drivers/serial/pmac_zilog.c @@ -63,11 +63,17 @@ #include <asm/sections.h> #include <asm/io.h> #include <asm/irq.h> + +#ifdef CONFIG_PPC_PMAC #include <asm/prom.h> #include <asm/machdep.h> #include <asm/pmac_feature.h> #include <asm/dbdma.h> #include <asm/macio.h> +#else +#include <linux/platform_device.h> +#define of_machine_is_compatible(x) (0) +#endif #if defined (CONFIG_SERIAL_PMACZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) #define SUPPORT_SYSRQ @@ -83,11 +89,9 @@ static char version[] __initdata = "pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)"; MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>"); -MODULE_DESCRIPTION("Driver for the PowerMac serial ports."); +MODULE_DESCRIPTION("Driver for the Mac and PowerMac serial ports."); MODULE_LICENSE("GPL"); -#define PWRDBG(fmt, arg...) printk(KERN_DEBUG fmt , ## arg) - #ifdef CONFIG_SERIAL_PMACZILOG_TTYS #define PMACZILOG_MAJOR TTY_MAJOR #define PMACZILOG_MINOR 64 @@ -153,8 +157,8 @@ static void pmz_load_zsregs(struct uart_pmac_port *uap, u8 *regs) write_zsreg(uap, R10, regs[R10]); /* Set TX/RX controls sans the enable bits. */ - write_zsreg(uap, R3, regs[R3] & ~RxENABLE); - write_zsreg(uap, R5, regs[R5] & ~TxENABLE); + write_zsreg(uap, R3, regs[R3] & ~RxENABLE); + write_zsreg(uap, R5, regs[R5] & ~TxENABLE); /* now set R7 "prime" on ESCC */ write_zsreg(uap, R15, regs[R15] | EN85C30); @@ -205,7 +209,7 @@ static void pmz_load_zsregs(struct uart_pmac_port *uap, u8 *regs) */ static void pmz_maybe_update_regs(struct uart_pmac_port *uap) { - if (!ZS_REGS_HELD(uap)) { + if (!ZS_REGS_HELD(uap)) { if (ZS_TX_ACTIVE(uap)) { uap->flags |= PMACZILOG_FLAG_REGS_HELD; } else { @@ -281,7 +285,7 @@ static struct tty_struct *pmz_receive_chars(struct uart_pmac_port *uap) spin_lock(&uap->port.lock); if (swallow) goto next_char; - } + } #endif /* CONFIG_MAGIC_SYSRQ && CONFIG_SERIAL_CORE_CONSOLE */ /* A real serial line, record the character and status. */ @@ -317,7 +321,7 @@ static struct tty_struct *pmz_receive_chars(struct uart_pmac_port *uap) if (uap->port.ignore_status_mask == 0xff || (r1 & uap->port.ignore_status_mask) == 0) { - tty_insert_flip_char(tty, ch, flag); + tty_insert_flip_char(tty, ch, flag); } if (r1 & Rx_OVR) tty_insert_flip_char(tty, 0, TTY_OVERRUN); @@ -341,7 +345,7 @@ static struct tty_struct *pmz_receive_chars(struct uart_pmac_port *uap) uap->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK); write_zsreg(uap, R1, uap->curregs[R1]); zssync(uap); - dev_err(&uap->dev->ofdev.dev, "pmz: rx irq flood !\n"); + pmz_error("pmz: rx irq flood !\n"); return tty; } @@ -470,47 +474,47 @@ static irqreturn_t pmz_interrupt(int irq, void *dev_id) uap_a = pmz_get_port_A(uap); uap_b = uap_a->mate; - - spin_lock(&uap_a->port.lock); + + spin_lock(&uap_a->port.lock); r3 = read_zsreg(uap_a, R3); #ifdef DEBUG_HARD pmz_debug("irq, r3: %x\n", r3); #endif - /* Channel A */ + /* Channel A */ tty = NULL; - if (r3 & (CHAEXT | CHATxIP | CHARxIP)) { + if (r3 & (CHAEXT | CHATxIP | CHARxIP)) { write_zsreg(uap_a, R0, RES_H_IUS); zssync(uap_a); - if (r3 & CHAEXT) - pmz_status_handle(uap_a); + if (r3 & CHAEXT) + pmz_status_handle(uap_a); if (r3 & CHARxIP) tty = pmz_receive_chars(uap_a); - if (r3 & CHATxIP) - pmz_transmit_chars(uap_a); - rc = IRQ_HANDLED; - } - spin_unlock(&uap_a->port.lock); + if (r3 & CHATxIP) + pmz_transmit_chars(uap_a); + rc = IRQ_HANDLED; + } + spin_unlock(&uap_a->port.lock); if (tty != NULL) tty_flip_buffer_push(tty); if (uap_b->node == NULL) goto out; - spin_lock(&uap_b->port.lock); + spin_lock(&uap_b->port.lock); tty = NULL; if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) { write_zsreg(uap_b, R0, RES_H_IUS); zssync(uap_b); - if (r3 & CHBEXT) - pmz_status_handle(uap_b); - if (r3 & CHBRxIP) - tty = pmz_receive_chars(uap_b); - if (r3 & CHBTxIP) - pmz_transmit_chars(uap_b); - rc = IRQ_HANDLED; - } - spin_unlock(&uap_b->port.lock); + if (r3 & CHBEXT) + pmz_status_handle(uap_b); + if (r3 & CHBRxIP) + tty = pmz_receive_chars(uap_b); + if (r3 & CHBTxIP) + pmz_transmit_chars(uap_b); + rc = IRQ_HANDLED; + } + spin_unlock(&uap_b->port.lock); if (tty != NULL) tty_flip_buffer_push(tty); @@ -718,7 +722,7 @@ static void pmz_enable_ms(struct uart_port *port) if (ZS_IS_ASLEEP(uap)) return; - /* NOTE: Not subject to 'transmitter active' rule. */ + /* NOTE: Not subject to 'transmitter active' rule. */ write_zsreg(uap, R15, uap->curregs[R15]); } } @@ -748,7 +752,7 @@ static void pmz_break_ctl(struct uart_port *port, int break_state) if (new_reg != uap->curregs[R5]) { uap->curregs[R5] = new_reg; - /* NOTE: Not subject to 'transmitter active' rule. */ + /* NOTE: Not subject to 'transmitter active' rule. */ if (ZS_IS_ASLEEP(uap)) return; write_zsreg(uap, R5, uap->curregs[R5]); @@ -757,6 +761,8 @@ static void pmz_break_ctl(struct uart_port *port, int break_state) spin_unlock_irqrestore(&port->lock, flags); } +#ifdef CONFIG_PPC_PMAC + /* * Turn power on or off to the SCC and associated stuff * (port drivers, modem, IR port, etc.) @@ -792,6 +798,15 @@ static int pmz_set_scc_power(struct uart_pmac_port *uap, int state) return delay; } +#else + +static int pmz_set_scc_power(struct uart_pmac_port *uap, int state) +{ + return 0; +} + +#endif /* !CONFIG_PPC_PMAC */ + /* * FixZeroBug....Works around a bug in the SCC receving channel. * Inspired from Darwin code, 15 Sept. 2000 -DanM @@ -908,7 +923,6 @@ static int __pmz_startup(struct uart_pmac_port *uap) /* Remember status for DCD/CTS changes */ uap->prev_status = read_zsreg(uap, R0); - return pwr_delay; } @@ -955,9 +969,9 @@ static int pmz_startup(struct uart_port *port) } pmz_get_port_A(uap)->flags |= PMACZILOG_FLAG_IS_IRQ_ON; - if (request_irq(uap->port.irq, pmz_interrupt, IRQF_SHARED, "PowerMac Zilog", uap)) { - dev_err(&uap->dev->ofdev.dev, - "Unable to register zs interrupt handler.\n"); + if (request_irq(uap->port.irq, pmz_interrupt, IRQF_SHARED, + "SCC", uap)) { + pmz_error("Unable to register zs interrupt handler.\n"); pmz_set_scc_power(uap, 0); mutex_unlock(&pmz_irq_mutex); return -ENXIO; @@ -983,7 +997,7 @@ static int pmz_startup(struct uart_port *port) if (!ZS_IS_EXTCLK(uap)) uap->curregs[R1] |= EXT_INT_ENAB; write_zsreg(uap, R1, uap->curregs[R1]); - spin_unlock_irqrestore(&port->lock, flags); + spin_unlock_irqrestore(&port->lock, flags); pmz_debug("pmz: startup() done.\n"); @@ -1003,7 +1017,7 @@ static void pmz_shutdown(struct uart_port *port) mutex_lock(&pmz_irq_mutex); /* Release interrupt handler */ - free_irq(uap->port.irq, uap); + free_irq(uap->port.irq, uap); spin_lock_irqsave(&port->lock, flags); @@ -1051,7 +1065,6 @@ static void pmz_convert_to_zs(struct uart_pmac_port *uap, unsigned int cflag, { int brg; - /* Switch to external clocking for IrDA high clock rates. That * code could be re-used for Midi interfaces with different * multipliers @@ -1198,7 +1211,7 @@ static void pmz_irda_setup(struct uart_pmac_port *uap, unsigned long *baud) while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0 || (read_zsreg(uap, R1) & ALL_SNT) == 0) { if (--t <= 0) { - dev_err(&uap->dev->ofdev.dev, "transmitter didn't drain\n"); + pmz_error("transmitter didn't drain\n"); return; } udelay(10); @@ -1214,7 +1227,7 @@ static void pmz_irda_setup(struct uart_pmac_port *uap, unsigned long *baud) read_zsdata(uap); mdelay(10); if (--t <= 0) { - dev_err(&uap->dev->ofdev.dev, "receiver didn't drain\n"); + pmz_error("receiver didn't drain\n"); return; } } @@ -1223,20 +1236,19 @@ static void pmz_irda_setup(struct uart_pmac_port *uap, unsigned long *baud) uap->curregs[R5] |= DTR; write_zsreg(uap, R5, uap->curregs[R5]); zssync(uap); - mdelay(1); + mdelay(1); /* Switch SCC to 19200 */ pmz_convert_to_zs(uap, CS8, 0, 19200); pmz_load_zsregs(uap, uap->curregs); - mdelay(1); + mdelay(1); /* Write get_version command byte */ write_zsdata(uap, 1); t = 5000; while ((read_zsreg(uap, R0) & Rx_CH_AV) == 0) { if (--t <= 0) { - dev_err(&uap->dev->ofdev.dev, - "irda_setup timed out on get_version byte\n"); + pmz_error("irda_setup timed out on get_version byte\n"); goto out; } udelay(10); @@ -1244,8 +1256,7 @@ static void pmz_irda_setup(struct uart_pmac_port *uap, unsigned long *baud) version = read_zsdata(uap); if (version < 4) { - dev_info(&uap->dev->ofdev.dev, "IrDA: dongle version %d not supported\n", - version); + pmz_info("IrDA: dongle version %d not supported\n", version); goto out; } @@ -1254,18 +1265,16 @@ static void pmz_irda_setup(struct uart_pmac_port *uap, unsigned long *baud) t = 5000; while ((read_zsreg(uap, R0) & Rx_CH_AV) == 0) { if (--t <= 0) { - dev_err(&uap->dev->ofdev.dev, - "irda_setup timed out on speed mode byte\n"); + pmz_error("irda_setup timed out on speed mode byte\n"); goto out; } udelay(10); } t = read_zsdata(uap); if (t != cmdbyte) - dev_err(&uap->dev->ofdev.dev, - "irda_setup speed mode byte = %x (%x)\n", t, cmdbyte); + pmz_error("irda_setup speed mode byte = %x (%x)\n", t, cmdbyte); - dev_info(&uap->dev->ofdev.dev, "IrDA setup for %ld bps, dongle version: %d\n", + pmz_info("IrDA setup for %ld bps, dongle version: %d\n", *baud, version); (void)read_zsdata(uap); @@ -1415,7 +1424,7 @@ static void pmz_poll_put_char(struct uart_port *port, unsigned char c) write_zsdata(uap, c); } -#endif +#endif /* CONFIG_CONSOLE_POLL */ static struct uart_ops pmz_pops = { .tx_empty = pmz_tx_empty, @@ -1440,6 +1449,8 @@ static struct uart_ops pmz_pops = { #endif }; +#ifdef CONFIG_PPC_PMAC + /* * Setup one port structure after probing, HW is down at this point, * Unlike sunzilog, we don't need to pre-init the spinlock as we don't @@ -1463,7 +1474,7 @@ static int __init pmz_init_port(struct uart_pmac_port *uap) return -ENODEV; uap->port.mapbase = r_ports.start; uap->port.membase = ioremap(uap->port.mapbase, 0x1000); - + uap->control_reg = uap->port.membase; uap->data_reg = uap->control_reg + 0x10; @@ -1590,7 +1601,7 @@ static void pmz_dispose_port(struct uart_pmac_port *uap) } /* - * Called upon match with an escc node in the devive-tree. + * Called upon match with an escc node in the device-tree. */ static int pmz_attach(struct macio_dev *mdev, const struct of_device_id *match) { @@ -1812,7 +1823,7 @@ static int __init pmz_probe(void) pmz_ports[count].node = node_a; pmz_ports[count+1].node = node_b; pmz_ports[count].port.line = count; - pmz_ports[count+1].port.line = count+1; + pmz_ports[count+1].port.line = count+1; /* * Setup the ports for real @@ -1836,6 +1847,88 @@ next: return 0; } +#else + +extern struct platform_device scc_a_pdev, scc_b_pdev; + +static int __init pmz_init_port(struct uart_pmac_port *uap) +{ + struct resource *r_ports; + int irq; + + r_ports = platform_get_resource(uap->node, IORESOURCE_MEM, 0); + irq = platform_get_irq(uap->node, 0); + if (!r_ports || !irq) + return -ENODEV; + + uap->port.mapbase = r_ports->start; + uap->port.membase = (unsigned char __iomem *) r_ports->start; + uap->port.iotype = UPIO_MEM; + uap->port.irq = irq; + uap->port.uartclk = ZS_CLOCK; + uap->port.fifosize = 1; + uap->port.ops = &pmz_pops; + uap->port.type = PORT_PMAC_ZILOG; + uap->port.flags = 0; + + uap->control_reg = uap->port.membase; + uap->data_reg = uap->control_reg + 4; + uap->port_type = 0; + + pmz_convert_to_zs(uap, CS8, 0, 9600); + + return 0; +} + +static int __init pmz_probe(void) +{ + int err; + + pmz_ports_count = 0; + + pmz_ports[0].mate = &pmz_ports[1]; + pmz_ports[0].port.line = 0; + pmz_ports[0].flags = PMACZILOG_FLAG_IS_CHANNEL_A; + pmz_ports[0].node = &scc_a_pdev; + err = pmz_init_port(&pmz_ports[0]); + if (err) + return err; + pmz_ports_count++; + + pmz_ports[1].mate = &pmz_ports[0]; + pmz_ports[1].port.line = 1; + pmz_ports[1].flags = 0; + pmz_ports[1].node = &scc_b_pdev; + err = pmz_init_port(&pmz_ports[1]); + if (err) + return err; + pmz_ports_count++; + + return 0; +} + +static void pmz_dispose_port(struct uart_pmac_port *uap) +{ + memset(uap, 0, sizeof(struct uart_pmac_port)); +} + +static int __init pmz_attach(struct platform_device *pdev) +{ + int i; + + for (i = 0; i < pmz_ports_count; i++) + if (pmz_ports[i].node == pdev) + return 0; + return -ENODEV; +} + +static int __exit pmz_detach(struct platform_device *pdev) +{ + return 0; +} + +#endif /* !CONFIG_PPC_PMAC */ + #ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE static void pmz_console_write(struct console *con, const char *s, unsigned int count); @@ -1896,28 +1989,41 @@ err_out: return rc; } +#ifdef CONFIG_PPC_PMAC + static struct of_device_id pmz_match[] = { { - .name = "ch-a", + .name = "ch-a", }, { - .name = "ch-b", + .name = "ch-b", }, {}, }; MODULE_DEVICE_TABLE (of, pmz_match); -static struct macio_driver pmz_driver = -{ +static struct macio_driver pmz_driver = { .name = "pmac_zilog", .match_table = pmz_match, .probe = pmz_attach, .remove = pmz_detach, .suspend = pmz_suspend, - .resume = pmz_resume, + .resume = pmz_resume, }; +#else + +static struct platform_driver pmz_driver = { + .remove = __exit_p(pmz_detach), + .driver = { + .name = "scc", + .owner = THIS_MODULE, + }, +}; + +#endif /* !CONFIG_PPC_PMAC */ + static int __init init_pmz(void) { int rc, i; @@ -1952,19 +2058,27 @@ static int __init init_pmz(void) pmz_dispose_port(&pmz_ports[i]); return rc; } - + /* * Then we register the macio driver itself */ +#ifdef CONFIG_PPC_PMAC return macio_register_driver(&pmz_driver); +#else + return platform_driver_probe(&pmz_driver, pmz_attach); +#endif } static void __exit exit_pmz(void) { int i; +#ifdef CONFIG_PPC_PMAC /* Get rid of macio-driver (detach from macio) */ macio_unregister_driver(&pmz_driver); +#else + platform_driver_unregister(&pmz_driver); +#endif for (i = 0; i < pmz_ports_count; i++) { struct uart_pmac_port *uport = &pmz_ports[i]; @@ -2031,10 +2145,10 @@ static int __init pmz_console_setup(struct console *co, char *options) /* * XServe's default to 57600 bps */ - if (machine_is_compatible("RackMac1,1") - || machine_is_compatible("RackMac1,2") - || machine_is_compatible("MacRISC4")) - baud = 57600; + if (of_machine_is_compatible("RackMac1,1") + || of_machine_is_compatible("RackMac1,2") + || of_machine_is_compatible("MacRISC4")) + baud = 57600; /* * Check whether an invalid uart number has been specified, and diff --git a/drivers/serial/pmac_zilog.h b/drivers/serial/pmac_zilog.h index f6e77f12acd..cbc34fbb1b2 100644 --- a/drivers/serial/pmac_zilog.h +++ b/drivers/serial/pmac_zilog.h @@ -1,7 +1,15 @@ #ifndef __PMAC_ZILOG_H__ #define __PMAC_ZILOG_H__ -#define pmz_debug(fmt,arg...) dev_dbg(&uap->dev->ofdev.dev, fmt, ## arg) +#ifdef CONFIG_PPC_PMAC +#define pmz_debug(fmt, arg...) dev_dbg(&uap->dev->ofdev.dev, fmt, ## arg) +#define pmz_error(fmt, arg...) dev_err(&uap->dev->ofdev.dev, fmt, ## arg) +#define pmz_info(fmt, arg...) dev_info(&uap->dev->ofdev.dev, fmt, ## arg) +#else +#define pmz_debug(fmt, arg...) dev_dbg(&uap->node->dev, fmt, ## arg) +#define pmz_error(fmt, arg...) dev_err(&uap->node->dev, fmt, ## arg) +#define pmz_info(fmt, arg...) dev_info(&uap->node->dev, fmt, ## arg) +#endif /* * At most 2 ESCCs with 2 ports each @@ -17,6 +25,7 @@ struct uart_pmac_port { struct uart_port port; struct uart_pmac_port *mate; +#ifdef CONFIG_PPC_PMAC /* macio_dev for the escc holding this port (maybe be null on * early inited port) */ @@ -25,6 +34,9 @@ struct uart_pmac_port { * of "escc" node (ie. ch-a or ch-b) */ struct device_node *node; +#else + struct platform_device *node; +#endif /* Port type as obtained from device tree (IRDA, modem, ...) */ int port_type; @@ -55,10 +67,12 @@ struct uart_pmac_port { volatile u8 __iomem *control_reg; volatile u8 __iomem *data_reg; +#ifdef CONFIG_PPC_PMAC unsigned int tx_dma_irq; unsigned int rx_dma_irq; volatile struct dbdma_regs __iomem *tx_dma_regs; volatile struct dbdma_regs __iomem *rx_dma_regs; +#endif struct ktermios termios_cache; }; @@ -113,7 +127,7 @@ static inline void zssync(struct uart_pmac_port *port) #define BRG_TO_BPS(brg, freq) ((freq) / 2 / ((brg) + 2)) #define BPS_TO_BRG(bps, freq) ((((freq) + (bps)) / (2 * (bps))) - 2) -#define ZS_CLOCK 3686400 /* Z8530 RTxC input clock rate */ +#define ZS_CLOCK 3686400 /* Z8530 RTxC input clock rate */ /* The Zilog register set */ @@ -171,7 +185,7 @@ static inline void zssync(struct uart_pmac_port *port) /* Write Register 3 */ -#define RxENABLE 0x1 /* Rx Enable */ +#define RxENABLE 0x1 /* Rx Enable */ #define SYNC_L_INH 0x2 /* Sync Character Load Inhibit */ #define ADD_SM 0x4 /* Address Search Mode (SDLC) */ #define RxCRC_ENAB 0x8 /* Rx CRC Enable */ @@ -185,7 +199,7 @@ static inline void zssync(struct uart_pmac_port *port) /* Write Register 4 */ -#define PAR_ENAB 0x1 /* Parity Enable */ +#define PAR_ENAB 0x1 /* Parity Enable */ #define PAR_EVEN 0x2 /* Parity Even/Odd* */ #define SYNC_ENAB 0 /* Sync Modes Enable */ @@ -210,7 +224,7 @@ static inline void zssync(struct uart_pmac_port *port) #define TxCRC_ENAB 0x1 /* Tx CRC Enable */ #define RTS 0x2 /* RTS */ #define SDLC_CRC 0x4 /* SDLC/CRC-16 */ -#define TxENABLE 0x8 /* Tx Enable */ +#define TxENABLE 0x8 /* Tx Enable */ #define SND_BRK 0x10 /* Send Break */ #define Tx5 0x0 /* Tx 5 bits (or less)/character */ #define Tx7 0x20 /* Tx 7 bits/character */ @@ -372,11 +386,11 @@ static inline void zssync(struct uart_pmac_port *port) #define ZS_TX_ACTIVE(UP) ((UP)->flags & PMACZILOG_FLAG_TX_ACTIVE) #define ZS_WANTS_MODEM_STATUS(UP) ((UP)->flags & PMACZILOG_FLAG_MODEM_STATUS) #define ZS_IS_IRDA(UP) ((UP)->flags & PMACZILOG_FLAG_IS_IRDA) -#define ZS_IS_INTMODEM(UP) ((UP)->flags & PMACZILOG_FLAG_IS_INTMODEM) +#define ZS_IS_INTMODEM(UP) ((UP)->flags & PMACZILOG_FLAG_IS_INTMODEM) #define ZS_HAS_DMA(UP) ((UP)->flags & PMACZILOG_FLAG_HAS_DMA) -#define ZS_IS_ASLEEP(UP) ((UP)->flags & PMACZILOG_FLAG_IS_ASLEEP) -#define ZS_IS_OPEN(UP) ((UP)->flags & PMACZILOG_FLAG_IS_OPEN) -#define ZS_IS_IRQ_ON(UP) ((UP)->flags & PMACZILOG_FLAG_IS_IRQ_ON) -#define ZS_IS_EXTCLK(UP) ((UP)->flags & PMACZILOG_FLAG_IS_EXTCLK) +#define ZS_IS_ASLEEP(UP) ((UP)->flags & PMACZILOG_FLAG_IS_ASLEEP) +#define ZS_IS_OPEN(UP) ((UP)->flags & PMACZILOG_FLAG_IS_OPEN) +#define ZS_IS_IRQ_ON(UP) ((UP)->flags & PMACZILOG_FLAG_IS_IRQ_ON) +#define ZS_IS_EXTCLK(UP) ((UP)->flags & PMACZILOG_FLAG_IS_EXTCLK) #endif /* __PMAC_ZILOG_H__ */ diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c index 95421fa3b30..e91db4b3801 100644 --- a/drivers/serial/serial_cs.c +++ b/drivers/serial/serial_cs.c @@ -696,11 +696,11 @@ static int serial_config(struct pcmcia_device * link) info->multi = info->quirk->multi; if (info->multi > 1) - multi_config(link); + i = multi_config(link); else - simple_config(link); + i = simple_config(link); - if (info->ndev == 0) + if (i || info->ndev == 0) goto failed; /* @@ -715,6 +715,7 @@ static int serial_config(struct pcmcia_device * link) return 0; failed: + dev_warn(&link->dev, "serial_cs: failed to initialize\n"); serial_remove(link); return -ENODEV; } diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index 0efcded59ae..f7d2589926d 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -518,34 +518,6 @@ static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xfffffe80) return __raw_readb(SCPDR)&0x01 ? 1 : 0; /* SCI */ - if (port->mapbase == 0xa4000150) - return __raw_readb(SCPDR)&0x10 ? 1 : 0; /* SCIF */ - if (port->mapbase == 0xa4000140) - return __raw_readb(SCPDR)&0x04 ? 1 : 0; /* IRDA */ - return 1; -} -#elif defined(CONFIG_CPU_SUBTYPE_SH7705) -static inline int sci_rxd_in(struct uart_port *port) -{ - if (port->mapbase == SCIF0) - return __raw_readb(SCPDR)&0x04 ? 1 : 0; /* IRDA */ - if (port->mapbase == SCIF2) - return __raw_readb(SCPDR)&0x10 ? 1 : 0; /* SCIF */ - return 1; -} -#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) -static inline int sci_rxd_in(struct uart_port *port) -{ - return sci_in(port,SCxSR)&0x0010 ? 1 : 0; -} -#elif defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) -static inline int sci_rxd_in(struct uart_port *port) -{ - if (port->mapbase == 0xa4430000) - return sci_in(port, SCxSR) & 0x0003 ? 1 : 0; - else if (port->mapbase == 0xa4438000) - return sci_in(port, SCxSR) & 0x0003 ? 1 : 0; return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7750) || \ @@ -558,207 +530,17 @@ static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xffe00000) return __raw_readb(SCSPTR1)&0x01 ? 1 : 0; /* SCI */ - if (port->mapbase == 0xffe80000) - return __raw_readw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */ - return 1; -} -#elif defined(CONFIG_CPU_SUBTYPE_SH4_202) -static inline int sci_rxd_in(struct uart_port *port) -{ - if (port->mapbase == 0xffe80000) - return __raw_readw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */ return 1; } -#elif defined(CONFIG_CPU_SUBTYPE_SH7757) -static inline int sci_rxd_in(struct uart_port *port) -{ - if (port->mapbase == 0xfe4b0000) - return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; - if (port->mapbase == 0xfe4c0000) - return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; - if (port->mapbase == 0xfe4d0000) - return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; -} -#elif defined(CONFIG_CPU_SUBTYPE_SH7760) -static inline int sci_rxd_in(struct uart_port *port) -{ - if (port->mapbase == 0xfe600000) - return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ - if (port->mapbase == 0xfe610000) - return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ - if (port->mapbase == 0xfe620000) - return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ - return 1; -} -#elif defined(CONFIG_CPU_SUBTYPE_SH7343) -static inline int sci_rxd_in(struct uart_port *port) -{ - if (port->mapbase == 0xffe00000) - return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ - if (port->mapbase == 0xffe10000) - return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ - if (port->mapbase == 0xffe20000) - return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ - if (port->mapbase == 0xffe30000) - return __raw_readw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ - return 1; -} -#elif defined(CONFIG_CPU_SUBTYPE_SH7366) -static inline int sci_rxd_in(struct uart_port *port) -{ - if (port->mapbase == 0xffe00000) - return __raw_readb(SCPDR0) & 0x0001 ? 1 : 0; /* SCIF0 */ - return 1; -} -#elif defined(CONFIG_CPU_SUBTYPE_SH7722) -static inline int sci_rxd_in(struct uart_port *port) -{ - if (port->mapbase == 0xffe00000) - return __raw_readb(PSDR) & 0x02 ? 1 : 0; /* SCIF0 */ - if (port->mapbase == 0xffe10000) - return __raw_readb(PADR) & 0x40 ? 1 : 0; /* SCIF1 */ - if (port->mapbase == 0xffe20000) - return __raw_readb(PWDR) & 0x04 ? 1 : 0; /* SCIF2 */ - - return 1; -} -#elif defined(CONFIG_CPU_SUBTYPE_SH7723) -static inline int sci_rxd_in(struct uart_port *port) -{ - if (port->mapbase == 0xffe00000) - return __raw_readb(SCSPTR0) & 0x0008 ? 1 : 0; /* SCIF0 */ - if (port->mapbase == 0xffe10000) - return __raw_readb(SCSPTR1) & 0x0020 ? 1 : 0; /* SCIF1 */ - if (port->mapbase == 0xffe20000) - return __raw_readb(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF2 */ - if (port->mapbase == 0xa4e30000) - return __raw_readb(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF3 */ - if (port->mapbase == 0xa4e40000) - return __raw_readb(SCSPTR4) & 0x0001 ? 1 : 0; /* SCIF4 */ - if (port->mapbase == 0xa4e50000) - return __raw_readb(SCSPTR5) & 0x0008 ? 1 : 0; /* SCIF5 */ - return 1; -} -#elif defined(CONFIG_CPU_SUBTYPE_SH7724) -# define SCFSR 0x0010 -# define SCASSR 0x0014 -static inline int sci_rxd_in(struct uart_port *port) -{ - if (port->type == PORT_SCIF) - return __raw_readw((port->mapbase + SCFSR)) & SCIF_BRK ? 1 : 0; - if (port->type == PORT_SCIFA) - return __raw_readw((port->mapbase + SCASSR)) & SCIF_BRK ? 1 : 0; - return 1; -} -#elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103) -static inline int sci_rxd_in(struct uart_port *port) -{ - return sci_in(port, SCSPTR)&0x0001 ? 1 : 0; /* SCIF */ -} #elif defined(__H8300H__) || defined(__H8300S__) static inline int sci_rxd_in(struct uart_port *port) { int ch = (port->mapbase - SMR0) >> 3; return (H8300_SCI_DR(ch) & h8300_sci_pins[ch].rx) ? 1 : 0; } -#elif defined(CONFIG_CPU_SUBTYPE_SH7763) -static inline int sci_rxd_in(struct uart_port *port) -{ - if (port->mapbase == 0xffe00000) - return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ - if (port->mapbase == 0xffe08000) - return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ - if (port->mapbase == 0xffe10000) - return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF/IRDA */ - - return 1; -} -#elif defined(CONFIG_CPU_SUBTYPE_SH7770) -static inline int sci_rxd_in(struct uart_port *port) -{ - if (port->mapbase == 0xff923000) - return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ - if (port->mapbase == 0xff924000) - return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ - if (port->mapbase == 0xff925000) - return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ - return 1; -} -#elif defined(CONFIG_CPU_SUBTYPE_SH7780) -static inline int sci_rxd_in(struct uart_port *port) -{ - if (port->mapbase == 0xffe00000) - return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ - if (port->mapbase == 0xffe10000) - return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ - return 1; -} -#elif defined(CONFIG_CPU_SUBTYPE_SH7785) || \ - defined(CONFIG_CPU_SUBTYPE_SH7786) -static inline int sci_rxd_in(struct uart_port *port) -{ - if (port->mapbase == 0xffea0000) - return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ - if (port->mapbase == 0xffeb0000) - return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ - if (port->mapbase == 0xffec0000) - return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ - if (port->mapbase == 0xffed0000) - return __raw_readw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ - if (port->mapbase == 0xffee0000) - return __raw_readw(SCSPTR4) & 0x0001 ? 1 : 0; /* SCIF */ - if (port->mapbase == 0xffef0000) - return __raw_readw(SCSPTR5) & 0x0001 ? 1 : 0; /* SCIF */ - return 1; -} -#elif defined(CONFIG_CPU_SUBTYPE_SH7201) || \ - defined(CONFIG_CPU_SUBTYPE_SH7203) || \ - defined(CONFIG_CPU_SUBTYPE_SH7206) || \ - defined(CONFIG_CPU_SUBTYPE_SH7263) -static inline int sci_rxd_in(struct uart_port *port) -{ - if (port->mapbase == 0xfffe8000) - return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ - if (port->mapbase == 0xfffe8800) - return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ - if (port->mapbase == 0xfffe9000) - return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ - if (port->mapbase == 0xfffe9800) - return __raw_readw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ -#if defined(CONFIG_CPU_SUBTYPE_SH7201) - if (port->mapbase == 0xfffeA000) - return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ - if (port->mapbase == 0xfffeA800) - return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ - if (port->mapbase == 0xfffeB000) - return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ - if (port->mapbase == 0xfffeB800) - return __raw_readw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ -#endif - return 1; -} -#elif defined(CONFIG_CPU_SUBTYPE_SH7619) -static inline int sci_rxd_in(struct uart_port *port) -{ - if (port->mapbase == 0xf8400000) - return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ - if (port->mapbase == 0xf8410000) - return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ - if (port->mapbase == 0xf8420000) - return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ - return 1; -} -#elif defined(CONFIG_CPU_SUBTYPE_SHX3) +#else /* default case for non-SCI processors */ static inline int sci_rxd_in(struct uart_port *port) { - if (port->mapbase == 0xffc30000) - return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ - if (port->mapbase == 0xffc40000) - return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ - if (port->mapbase == 0xffc50000) - return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ - if (port->mapbase == 0xffc60000) - return __raw_readw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ return 1; } #endif |