diff options
Diffstat (limited to 'drivers/serial')
| -rw-r--r-- | drivers/serial/8250.c | 17 | ||||
| -rw-r--r-- | drivers/serial/8250_gsc.c | 2 | ||||
| -rw-r--r-- | drivers/serial/8250_pci.c | 17 | ||||
| -rw-r--r-- | drivers/serial/Kconfig | 16 | ||||
| -rw-r--r-- | drivers/serial/cpm_uart/cpm_uart_core.c | 116 | ||||
| -rw-r--r-- | drivers/serial/dz.c | 24 | ||||
| -rw-r--r-- | drivers/serial/mpsc.c | 148 | ||||
| -rw-r--r-- | drivers/serial/zs.c | 21 |
8 files changed, 331 insertions, 30 deletions
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 27f34a9f9cb..a97f1ae11f7 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -1293,7 +1293,18 @@ receive_chars(struct uart_8250_port *up, unsigned int *status) char flag; do { - ch = serial_inp(up, UART_RX); + if (likely(lsr & UART_LSR_DR)) + ch = serial_inp(up, UART_RX); + else + /* + * Intel 82571 has a Serial Over Lan device that will + * set UART_LSR_BI without setting UART_LSR_DR when + * it receives a break. To avoid reading from the + * receive buffer without UART_LSR_DR bit set, we + * just force the read character to be 0 + */ + ch = 0; + flag = TTY_NORMAL; up->port.icount.rx++; @@ -1342,7 +1353,7 @@ receive_chars(struct uart_8250_port *up, unsigned int *status) ignore_char: lsr = serial_inp(up, UART_LSR); - } while ((lsr & UART_LSR_DR) && (max_count-- > 0)); + } while ((lsr & (UART_LSR_DR | UART_LSR_BI)) && (max_count-- > 0)); spin_unlock(&up->port.lock); tty_flip_buffer_push(tty); spin_lock(&up->port.lock); @@ -1425,7 +1436,7 @@ serial8250_handle_port(struct uart_8250_port *up) DEBUG_INTR("status = %x...", status); - if (status & UART_LSR_DR) + if (status & (UART_LSR_DR | UART_LSR_BI)) receive_chars(up, &status); check_modem_status(up); if (status & UART_LSR_THRE) diff --git a/drivers/serial/8250_gsc.c b/drivers/serial/8250_gsc.c index 4eb7437a404..0416ad3bc12 100644 --- a/drivers/serial/8250_gsc.c +++ b/drivers/serial/8250_gsc.c @@ -119,3 +119,5 @@ int __init probe_serial_gsc(void) } module_init(probe_serial_gsc); + +MODULE_LICENSE("GPL"); diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index 1b36087665a..c2f23933155 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -767,6 +767,9 @@ pci_default_setup(struct serial_private *priv, struct pciserial_board *board, #define PCI_SUBDEVICE_ID_POCTAL232 0x0308 #define PCI_SUBDEVICE_ID_POCTAL422 0x0408 +/* Unknown vendors/cards - this should not be in linux/pci_ids.h */ +#define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584 + /* * Master list of serial port init/setup/exit quirks. * This does not describe the general nature of the port. @@ -882,6 +885,15 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { }, { .vendor = PCI_VENDOR_ID_PLX, + .device = PCI_DEVICE_ID_PLX_9050, + .subvendor = PCI_VENDOR_ID_PLX, + .subdevice = PCI_SUBDEVICE_ID_UNKNOWN_0x1584, + .init = pci_plx9050_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_plx9050_exit), + }, + { + .vendor = PCI_VENDOR_ID_PLX, .device = PCI_DEVICE_ID_PLX_ROMULUS, .subvendor = PCI_VENDOR_ID_PLX, .subdevice = PCI_DEVICE_ID_PLX_ROMULUS, @@ -2197,6 +2209,11 @@ static struct pci_device_id serial_pci_tbl[] = { { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_1077, PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b2_4_921600 }, + /* Unknown card - subdevice 0x1584 */ + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_VENDOR_ID_PLX, + PCI_SUBDEVICE_ID_UNKNOWN_0x1584, 0, 0, + pbn_b0_4_115200 }, { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, PCI_SUBVENDOR_ID_KEYSPAN, PCI_SUBDEVICE_ID_KEYSPAN_SX2, 0, 0, diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 8fc7451c004..3b4a14e355c 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -942,22 +942,6 @@ config SERIAL_IP22_ZILOG_CONSOLE depends on SERIAL_IP22_ZILOG=y select SERIAL_CORE_CONSOLE -config V850E_UART - bool "NEC V850E on-chip UART support" - depends on V850E_MA1 || V850E_ME2 || V850E_TEG || V850E2_ANNA || V850E_AS85EP1 - select SERIAL_CORE - default y - -config V850E_UARTB - bool - depends on V850E_UART && V850E_ME2 - default y - -config V850E_UART_CONSOLE - bool "Use NEC V850E on-chip UART for console" - depends on V850E_UART - select SERIAL_CORE_CONSOLE - config SERIAL_SH_SCI tristate "SuperH SCI(F) serial port support" depends on SUPERH || H8300 diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c index 93e407ee08b..a4f86927a74 100644 --- a/drivers/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/serial/cpm_uart/cpm_uart_core.c @@ -201,6 +201,10 @@ static void cpm_uart_int_tx(struct uart_port *port) cpm_uart_tx_pump(port); } +#ifdef CONFIG_CONSOLE_POLL +static int serial_polled; +#endif + /* * Receive characters */ @@ -222,6 +226,12 @@ static void cpm_uart_int_rx(struct uart_port *port) */ bdp = pinfo->rx_cur; for (;;) { +#ifdef CONFIG_CONSOLE_POLL + if (unlikely(serial_polled)) { + serial_polled = 0; + return; + } +#endif /* get status */ status = in_be16(&bdp->cbd_sc); /* If this one is empty, return happy */ @@ -253,7 +263,12 @@ static void cpm_uart_int_rx(struct uart_port *port) goto handle_error; if (uart_handle_sysrq_char(port, ch)) continue; - +#ifdef CONFIG_CONSOLE_POLL + if (unlikely(serial_polled)) { + serial_polled = 0; + return; + } +#endif error_return: tty_insert_flip_char(tty, ch, flg); @@ -420,10 +435,13 @@ static void cpm_uart_shutdown(struct uart_port *port) } /* Shut them really down and reinit buffer descriptors */ - if (IS_SMC(pinfo)) + if (IS_SMC(pinfo)) { + out_be16(&pinfo->smcup->smc_brkcr, 0); cpm_line_cr_cmd(pinfo, CPM_CR_STOP_TX); - else + } else { + out_be16(&pinfo->sccup->scc_brkcr, 0); cpm_line_cr_cmd(pinfo, CPM_CR_GRA_STOP_TX); + } cpm_uart_initbd(pinfo); } @@ -539,9 +557,11 @@ static void cpm_uart_set_termios(struct uart_port *port, * enables, because we want to put them back if they were * present. */ - prev_mode = in_be16(&smcp->smc_smcmr); - out_be16(&smcp->smc_smcmr, smcr_mk_clen(bits) | cval | SMCMR_SM_UART); - setbits16(&smcp->smc_smcmr, (prev_mode & (SMCMR_REN | SMCMR_TEN))); + prev_mode = in_be16(&smcp->smc_smcmr) & (SMCMR_REN | SMCMR_TEN); + /* Output in *one* operation, so we don't interrupt RX/TX if they + * were already enabled. */ + out_be16(&smcp->smc_smcmr, smcr_mk_clen(bits) | cval | + SMCMR_SM_UART | prev_mode); } else { out_be16(&sccp->scc_psmr, (sbits << 12) | scval); } @@ -865,6 +885,80 @@ static void cpm_uart_config_port(struct uart_port *port, int flags) cpm_uart_request_port(port); } } + +#ifdef CONFIG_CONSOLE_POLL +/* Serial polling routines for writing and reading from the uart while + * in an interrupt or debug context. + */ + +#define GDB_BUF_SIZE 512 /* power of 2, please */ + +static char poll_buf[GDB_BUF_SIZE]; +static char *pollp; +static int poll_chars; + +static int poll_wait_key(char *obuf, struct uart_cpm_port *pinfo) +{ + u_char c, *cp; + volatile cbd_t *bdp; + int i; + + /* Get the address of the host memory buffer. + */ + bdp = pinfo->rx_cur; + while (bdp->cbd_sc & BD_SC_EMPTY) + ; + + /* If the buffer address is in the CPM DPRAM, don't + * convert it. + */ + cp = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo); + + if (obuf) { + i = c = bdp->cbd_datlen; + while (i-- > 0) + *obuf++ = *cp++; + } else + c = *cp; + bdp->cbd_sc &= ~(BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV | BD_SC_ID); + bdp->cbd_sc |= BD_SC_EMPTY; + + if (bdp->cbd_sc & BD_SC_WRAP) + bdp = pinfo->rx_bd_base; + else + bdp++; + pinfo->rx_cur = (cbd_t *)bdp; + + return (int)c; +} + +static int cpm_get_poll_char(struct uart_port *port) +{ + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + + if (!serial_polled) { + serial_polled = 1; + poll_chars = 0; + } + if (poll_chars <= 0) { + poll_chars = poll_wait_key(poll_buf, pinfo); + pollp = poll_buf; + } + poll_chars--; + return *pollp++; +} + +static void cpm_put_poll_char(struct uart_port *port, + unsigned char c) +{ + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + static char ch[2]; + + ch[0] = (char)c; + cpm_uart_early_write(pinfo->port.line, ch, 1); +} +#endif /* CONFIG_CONSOLE_POLL */ + static struct uart_ops cpm_uart_pops = { .tx_empty = cpm_uart_tx_empty, .set_mctrl = cpm_uart_set_mctrl, @@ -882,6 +976,10 @@ static struct uart_ops cpm_uart_pops = { .request_port = cpm_uart_request_port, .config_port = cpm_uart_config_port, .verify_port = cpm_uart_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = cpm_get_poll_char, + .poll_put_char = cpm_put_poll_char, +#endif }; struct uart_cpm_port cpm_uart_ports[UART_NR]; @@ -1105,12 +1203,14 @@ static int __init cpm_uart_console_setup(struct console *co, char *options) udbg_putc = NULL; #endif - cpm_line_cr_cmd(pinfo, CPM_CR_STOP_TX); - if (IS_SMC(pinfo)) { + out_be16(&pinfo->smcup->smc_brkcr, 0); + cpm_line_cr_cmd(pinfo, CPM_CR_STOP_TX); clrbits8(&pinfo->smcp->smc_smcm, SMCM_RX | SMCM_TX); clrbits16(&pinfo->smcp->smc_smcmr, SMCMR_REN | SMCMR_TEN); } else { + out_be16(&pinfo->sccup->scc_brkcr, 0); + cpm_line_cr_cmd(pinfo, CPM_CR_GRA_STOP_TX); clrbits16(&pinfo->sccp->scc_sccm, UART_SCCM_TX | UART_SCCM_RX); clrbits32(&pinfo->sccp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT); } diff --git a/drivers/serial/dz.c b/drivers/serial/dz.c index a81d2c2ff8a..6042b87797a 100644 --- a/drivers/serial/dz.c +++ b/drivers/serial/dz.c @@ -642,6 +642,26 @@ static void dz_set_termios(struct uart_port *uport, struct ktermios *termios, spin_unlock_irqrestore(&dport->port.lock, flags); } +/* + * Hack alert! + * Required solely so that the initial PROM-based console + * works undisturbed in parallel with this one. + */ +static void dz_pm(struct uart_port *uport, unsigned int state, + unsigned int oldstate) +{ + struct dz_port *dport = to_dport(uport); + unsigned long flags; + + spin_lock_irqsave(&dport->port.lock, flags); + if (state < 3) + dz_start_tx(&dport->port); + else + dz_stop_tx(&dport->port); + spin_unlock_irqrestore(&dport->port.lock, flags); +} + + static const char *dz_type(struct uart_port *uport) { return "DZ"; @@ -738,6 +758,7 @@ static struct uart_ops dz_ops = { .startup = dz_startup, .shutdown = dz_shutdown, .set_termios = dz_set_termios, + .pm = dz_pm, .type = dz_type, .release_port = dz_release_port, .request_port = dz_request_port, @@ -861,7 +882,10 @@ static int __init dz_console_setup(struct console *co, char *options) if (ret) return ret; + spin_lock_init(&dport->port.lock); /* For dz_pm(). */ + dz_reset(dport); + dz_pm(uport, 0, -1); if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); diff --git a/drivers/serial/mpsc.c b/drivers/serial/mpsc.c index c9f53e71f25..61d3ade5286 100644 --- a/drivers/serial/mpsc.c +++ b/drivers/serial/mpsc.c @@ -921,6 +921,10 @@ static int mpsc_make_ready(struct mpsc_port_info *pi) return 0; } +#ifdef CONFIG_CONSOLE_POLL +static int serial_polled; +#endif + /* ****************************************************************************** * @@ -956,7 +960,12 @@ static int mpsc_rx_intr(struct mpsc_port_info *pi) while (!((cmdstat = be32_to_cpu(rxre->cmdstat)) & SDMA_DESC_CMDSTAT_O)) { bytes_in = be16_to_cpu(rxre->bytecnt); - +#ifdef CONFIG_CONSOLE_POLL + if (unlikely(serial_polled)) { + serial_polled = 0; + return 0; + } +#endif /* Following use of tty struct directly is deprecated */ if (unlikely(tty_buffer_request_room(tty, bytes_in) < bytes_in)) { @@ -1017,6 +1026,12 @@ static int mpsc_rx_intr(struct mpsc_port_info *pi) if (uart_handle_sysrq_char(&pi->port, *bp)) { bp++; bytes_in--; +#ifdef CONFIG_CONSOLE_POLL + if (unlikely(serial_polled)) { + serial_polled = 0; + return 0; + } +#endif goto next_frame; } @@ -1519,6 +1534,133 @@ static int mpsc_verify_port(struct uart_port *port, struct serial_struct *ser) return rc; } +#ifdef CONFIG_CONSOLE_POLL +/* Serial polling routines for writing and reading from the uart while + * in an interrupt or debug context. + */ + +static char poll_buf[2048]; +static int poll_ptr; +static int poll_cnt; +static void mpsc_put_poll_char(struct uart_port *port, + unsigned char c); + +static int mpsc_get_poll_char(struct uart_port *port) +{ + struct mpsc_port_info *pi = (struct mpsc_port_info *)port; + struct mpsc_rx_desc *rxre; + u32 cmdstat, bytes_in, i; + u8 *bp; + + if (!serial_polled) + serial_polled = 1; + + pr_debug("mpsc_rx_intr[%d]: Handling Rx intr\n", pi->port.line); + + if (poll_cnt) { + poll_cnt--; + return poll_buf[poll_ptr++]; + } + poll_ptr = 0; + poll_cnt = 0; + + while (poll_cnt == 0) { + rxre = (struct mpsc_rx_desc *)(pi->rxr + + (pi->rxr_posn*MPSC_RXRE_SIZE)); + dma_cache_sync(pi->port.dev, (void *)rxre, + MPSC_RXRE_SIZE, DMA_FROM_DEVICE); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + invalidate_dcache_range((ulong)rxre, + (ulong)rxre + MPSC_RXRE_SIZE); +#endif + /* + * Loop through Rx descriptors handling ones that have + * been completed. + */ + while (poll_cnt == 0 && + !((cmdstat = be32_to_cpu(rxre->cmdstat)) & + SDMA_DESC_CMDSTAT_O)){ + bytes_in = be16_to_cpu(rxre->bytecnt); + bp = pi->rxb + (pi->rxr_posn * MPSC_RXBE_SIZE); + dma_cache_sync(pi->port.dev, (void *) bp, + MPSC_RXBE_SIZE, DMA_FROM_DEVICE); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + invalidate_dcache_range((ulong)bp, + (ulong)bp + MPSC_RXBE_SIZE); +#endif + if ((unlikely(cmdstat & (SDMA_DESC_CMDSTAT_BR | + SDMA_DESC_CMDSTAT_FR | SDMA_DESC_CMDSTAT_OR))) && + !(cmdstat & pi->port.ignore_status_mask)) { + poll_buf[poll_cnt] = *bp; + poll_cnt++; + } else { + for (i = 0; i < bytes_in; i++) { + poll_buf[poll_cnt] = *bp++; + poll_cnt++; + } + pi->port.icount.rx += bytes_in; + } + rxre->bytecnt = cpu_to_be16(0); + wmb(); + rxre->cmdstat = cpu_to_be32(SDMA_DESC_CMDSTAT_O | + SDMA_DESC_CMDSTAT_EI | + SDMA_DESC_CMDSTAT_F | + SDMA_DESC_CMDSTAT_L); + wmb(); + dma_cache_sync(pi->port.dev, (void *)rxre, + MPSC_RXRE_SIZE, DMA_BIDIRECTIONAL); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + flush_dcache_range((ulong)rxre, + (ulong)rxre + MPSC_RXRE_SIZE); +#endif + + /* Advance to next descriptor */ + pi->rxr_posn = (pi->rxr_posn + 1) & + (MPSC_RXR_ENTRIES - 1); + rxre = (struct mpsc_rx_desc *)(pi->rxr + + (pi->rxr_posn * MPSC_RXRE_SIZE)); + dma_cache_sync(pi->port.dev, (void *)rxre, + MPSC_RXRE_SIZE, DMA_FROM_DEVICE); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + invalidate_dcache_range((ulong)rxre, + (ulong)rxre + MPSC_RXRE_SIZE); +#endif + } + + /* Restart rx engine, if its stopped */ + if ((readl(pi->sdma_base + SDMA_SDCM) & SDMA_SDCM_ERD) == 0) + mpsc_start_rx(pi); + } + if (poll_cnt) { + poll_cnt--; + return poll_buf[poll_ptr++]; + } + + return 0; +} + + +static void mpsc_put_poll_char(struct uart_port *port, + unsigned char c) +{ + struct mpsc_port_info *pi = (struct mpsc_port_info *)port; + u32 data; + + data = readl(pi->mpsc_base + MPSC_MPCR); + writeb(c, pi->mpsc_base + MPSC_CHR_1); + mb(); + data = readl(pi->mpsc_base + MPSC_CHR_2); + data |= MPSC_CHR_2_TTCS; + writel(data, pi->mpsc_base + MPSC_CHR_2); + mb(); + + while (readl(pi->mpsc_base + MPSC_CHR_2) & MPSC_CHR_2_TTCS); +} +#endif static struct uart_ops mpsc_pops = { .tx_empty = mpsc_tx_empty, @@ -1537,6 +1679,10 @@ static struct uart_ops mpsc_pops = { .request_port = mpsc_request_port, .config_port = mpsc_config_port, .verify_port = mpsc_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = mpsc_get_poll_char, + .poll_put_char = mpsc_put_poll_char, +#endif }; /* diff --git a/drivers/serial/zs.c b/drivers/serial/zs.c index bd45b6230fd..9e6a873f820 100644 --- a/drivers/serial/zs.c +++ b/drivers/serial/zs.c @@ -787,7 +787,6 @@ static int zs_startup(struct uart_port *uport) zport->regs[1] &= ~RxINT_MASK; zport->regs[1] |= RxINT_ALL | TxINT_ENAB | EXT_INT_ENAB; zport->regs[3] |= RxENABLE; - zport->regs[5] |= TxENAB; zport->regs[15] |= BRKIE; write_zsreg(zport, R1, zport->regs[1]); write_zsreg(zport, R3, zport->regs[3]); @@ -814,7 +813,6 @@ static void zs_shutdown(struct uart_port *uport) spin_lock_irqsave(&scc->zlock, flags); - zport->regs[5] &= ~TxENAB; zport->regs[3] &= ~RxENABLE; write_zsreg(zport, R5, zport->regs[5]); write_zsreg(zport, R3, zport->regs[3]); @@ -959,6 +957,23 @@ static void zs_set_termios(struct uart_port *uport, struct ktermios *termios, spin_unlock_irqrestore(&scc->zlock, flags); } +/* + * Hack alert! + * Required solely so that the initial PROM-based console + * works undisturbed in parallel with this one. + */ +static void zs_pm(struct uart_port *uport, unsigned int state, + unsigned int oldstate) +{ + struct zs_port *zport = to_zport(uport); + + if (state < 3) + zport->regs[5] |= TxENAB; + else + zport->regs[5] &= ~TxENAB; + write_zsreg(zport, R5, zport->regs[5]); +} + static const char *zs_type(struct uart_port *uport) { @@ -1041,6 +1056,7 @@ static struct uart_ops zs_ops = { .startup = zs_startup, .shutdown = zs_shutdown, .set_termios = zs_set_termios, + .pm = zs_pm, .type = zs_type, .release_port = zs_release_port, .request_port = zs_request_port, @@ -1190,6 +1206,7 @@ static int __init zs_console_setup(struct console *co, char *options) return ret; zs_reset(zport); + zs_pm(uport, 0, -1); if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); |