aboutsummaryrefslogtreecommitdiff
path: root/drivers/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/atmel_serial.c2
-rw-r--r--drivers/serial/bfin_5xx.c40
-rw-r--r--drivers/serial/sb1250-duart.c2
-rw-r--r--drivers/serial/serial_core.c10
-rw-r--r--drivers/serial/ucc_uart.c2
5 files changed, 23 insertions, 33 deletions
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index c065a704a93..42be8b01a40 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -1318,7 +1318,7 @@ static void __init atmel_console_get_options(struct uart_port *port, int *baud,
* If the baud rate generator isn't running, the port wasn't
* initialized by the boot loader.
*/
- quot = UART_GET_BRGR(port);
+ quot = UART_GET_BRGR(port) & ATMEL_US_CD;
if (!quot)
return;
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index d6b4ead693b..f20952c43cb 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -530,11 +530,7 @@ static unsigned int bfin_serial_get_mctrl(struct uart_port *port)
if (uart->cts_pin < 0)
return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
-# ifdef BF54x
- if (UART_GET_MSR(uart) & CTS)
-# else
- if (gpio_get_value(uart->cts_pin))
-# endif
+ if (UART_GET_CTS(uart))
return TIOCM_DSR | TIOCM_CAR;
else
#endif
@@ -549,17 +545,9 @@ static void bfin_serial_set_mctrl(struct uart_port *port, unsigned int mctrl)
return;
if (mctrl & TIOCM_RTS)
-# ifdef BF54x
- UART_PUT_MCR(uart, UART_GET_MCR(uart) & ~MRTS);
-# else
- gpio_set_value(uart->rts_pin, 0);
-# endif
+ UART_CLEAR_RTS(uart);
else
-# ifdef BF54x
- UART_PUT_MCR(uart, UART_GET_MCR(uart) | MRTS);
-# else
- gpio_set_value(uart->rts_pin, 1);
-# endif
+ UART_SET_RTS(uart);
#endif
}
@@ -752,11 +740,7 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
/* Disable UART */
ier = UART_GET_IER(uart);
-#ifdef CONFIG_BF54x
- UART_CLEAR_IER(uart, 0xF);
-#else
- UART_PUT_IER(uart, 0);
-#endif
+ UART_DISABLE_INTS(uart);
/* Set DLAB in LCR to Access DLL and DLH */
UART_SET_DLAB(uart);
@@ -771,11 +755,7 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
UART_PUT_LCR(uart, lcr);
/* Enable UART */
-#ifdef CONFIG_BF54x
- UART_SET_IER(uart, ier);
-#else
- UART_PUT_IER(uart, ier);
-#endif
+ UART_ENABLE_INTS(uart, ier);
val = UART_GET_GCTL(uart);
val |= UCEN;
@@ -833,15 +813,15 @@ bfin_serial_verify_port(struct uart_port *port, struct serial_struct *ser)
* Enable the IrDA function if tty->ldisc.num is N_IRDA.
* In other cases, disable IrDA function.
*/
-static void bfin_set_ldisc(struct tty_struct *tty)
+static void bfin_serial_set_ldisc(struct uart_port *port)
{
- int line = tty->index;
+ int line = port->line;
unsigned short val;
- if (line >= tty->driver->num)
+ if (line >= port->info->tty->driver->num)
return;
- switch (tty->ldisc.num) {
+ switch (port->info->tty->ldisc.num) {
case N_IRDA:
val = UART_GET_GCTL(&bfin_serial_ports[line]);
val |= (IREN | RPOLC);
@@ -866,6 +846,7 @@ static struct uart_ops bfin_serial_pops = {
.startup = bfin_serial_startup,
.shutdown = bfin_serial_shutdown,
.set_termios = bfin_serial_set_termios,
+ .set_ldisc = bfin_serial_set_ldisc,
.type = bfin_serial_type,
.release_port = bfin_serial_release_port,
.request_port = bfin_serial_request_port,
@@ -1206,7 +1187,6 @@ static int __init bfin_serial_init(void)
ret = uart_register_driver(&bfin_serial_reg);
if (ret == 0) {
- bfin_serial_reg.tty_driver->set_ldisc = bfin_set_ldisc;
ret = platform_driver_register(&bfin_serial_driver);
if (ret) {
pr_debug("uart register failed\n");
diff --git a/drivers/serial/sb1250-duart.c b/drivers/serial/sb1250-duart.c
index 2d6c08b3dbc..f8e1447a022 100644
--- a/drivers/serial/sb1250-duart.c
+++ b/drivers/serial/sb1250-duart.c
@@ -924,7 +924,7 @@ console_initcall(sbd_serial_console_init);
static struct uart_driver sbd_reg = {
.owner = THIS_MODULE,
- .driver_name = "serial",
+ .driver_name = "sb1250_duart",
.dev_name = "duart",
.major = TTY_MAJOR,
.minor = SB1250_DUART_MINOR_BASE,
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 53b03c629af..c9b64e73c98 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -1165,6 +1165,15 @@ out:
return ret;
}
+static void uart_set_ldisc(struct tty_struct *tty)
+{
+ struct uart_state *state = tty->driver_data;
+ struct uart_port *port = state->port;
+
+ if (port->ops->set_ldisc)
+ port->ops->set_ldisc(port);
+}
+
static void uart_set_termios(struct tty_struct *tty,
struct ktermios *old_termios)
{
@@ -2288,6 +2297,7 @@ static const struct tty_operations uart_ops = {
.unthrottle = uart_unthrottle,
.send_xchar = uart_send_xchar,
.set_termios = uart_set_termios,
+ .set_ldisc = uart_set_ldisc,
.stop = uart_stop,
.start = uart_start,
.hangup = uart_hangup,
diff --git a/drivers/serial/ucc_uart.c b/drivers/serial/ucc_uart.c
index 01917c433f1..566a8b42e05 100644
--- a/drivers/serial/ucc_uart.c
+++ b/drivers/serial/ucc_uart.c
@@ -195,7 +195,7 @@ struct uart_qe_port {
static struct uart_driver ucc_uart_driver = {
.owner = THIS_MODULE,
- .driver_name = "serial",
+ .driver_name = "ucc_uart",
.dev_name = "ttyQE",
.major = SERIAL_QE_MAJOR,
.minor = SERIAL_QE_MINOR,