diff options
Diffstat (limited to 'drivers/serial')
40 files changed, 634 insertions, 216 deletions
diff --git a/drivers/serial/68328serial.c b/drivers/serial/68328serial.c index ae0251ef6f4..78ed24bb6a3 100644 --- a/drivers/serial/68328serial.c +++ b/drivers/serial/68328serial.c @@ -35,6 +35,7 @@ #include <linux/pm.h> #include <linux/bitops.h> #include <linux/delay.h> +#include <linux/gfp.h> #include <asm/io.h> #include <asm/irq.h> diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 7c4ebe6ee18..2b1ea3d4c4f 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -38,6 +38,7 @@ #include <linux/serial_8250.h> #include <linux/nmi.h> #include <linux/mutex.h> +#include <linux/slab.h> #include <asm/io.h> #include <asm/irq.h> @@ -2408,6 +2409,21 @@ serial8250_set_termios(struct uart_port *port, struct ktermios *termios, } static void +serial8250_set_ldisc(struct uart_port *port) +{ + int line = port->line; + + if (line >= port->state->port.tty->driver->num) + return; + + if (port->state->port.tty->ldisc->ops->num == N_PPS) { + port->flags |= UPF_HARDPPS_CD; + serial8250_enable_ms(port); + } else + port->flags &= ~UPF_HARDPPS_CD; +} + +static void serial8250_pm(struct uart_port *port, unsigned int state, unsigned int oldstate) { @@ -2628,6 +2644,7 @@ static struct uart_ops serial8250_pops = { .startup = serial8250_startup, .shutdown = serial8250_shutdown, .set_termios = serial8250_set_termios, + .set_ldisc = serial8250_set_ldisc, .pm = serial8250_pm, .type = serial8250_type, .release_port = serial8250_release_port, diff --git a/drivers/serial/8250_gsc.c b/drivers/serial/8250_gsc.c index 33149d982e8..d8c0ffbfa6e 100644 --- a/drivers/serial/8250_gsc.c +++ b/drivers/serial/8250_gsc.c @@ -16,7 +16,6 @@ #include <linux/module.h> #include <linux/serial_core.h> #include <linux/signal.h> -#include <linux/slab.h> #include <linux/types.h> #include <asm/hardware.h> diff --git a/drivers/serial/8250_hp300.c b/drivers/serial/8250_hp300.c index 0e1410f2c03..c13438c9301 100644 --- a/drivers/serial/8250_hp300.c +++ b/drivers/serial/8250_hp300.c @@ -15,6 +15,7 @@ #include <linux/delay.h> #include <linux/dio.h> #include <linux/console.h> +#include <linux/slab.h> #include <asm/io.h> #include "8250.h" diff --git a/drivers/serial/8250_pnp.c b/drivers/serial/8250_pnp.c index 24485cc62ff..4822cb50cd0 100644 --- a/drivers/serial/8250_pnp.c +++ b/drivers/serial/8250_pnp.c @@ -348,6 +348,8 @@ static const struct pnp_device_id pnp_dev_table[] = { { "FUJ02E6", 0 }, /* Fujitsu Wacom 2FGT Tablet PC device */ { "FUJ02E7", 0 }, + /* Fujitsu Wacom 1FGT Tablet PC device */ + { "FUJ02E9", 0 }, /* * LG C1 EXPRESS DUAL (C1-PB11A3) touch screen (actually a FUJ02E6 in * disguise) diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index d6ff7339562..302836a8069 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -447,7 +447,7 @@ config SERIAL_CLPS711X_CONSOLE config SERIAL_SAMSUNG tristate "Samsung SoC serial support" - depends on ARM && PLAT_S3C + depends on ARM && PLAT_SAMSUNG select SERIAL_CORE help Support for the on-chip UARTs on the Samsung S3C24XX series CPUs, @@ -455,11 +455,18 @@ config SERIAL_SAMSUNG provide all of these ports, depending on how the serial port pins are configured. +config SERIAL_SAMSUNG_UARTS_4 + bool + depends on ARM && PLAT_SAMSUNG + default y if CPU_S3C2443 + help + Internal node for the common case of 4 Samsung compatible UARTs + config SERIAL_SAMSUNG_UARTS int - depends on ARM && PLAT_S3C + depends on ARM && PLAT_SAMSUNG default 2 if ARCH_S3C2400 - default 4 if ARCH_S5PC1XX || ARCH_S3C64XX || CPU_S3C2443 + default 4 if SERIAL_SAMSUNG_UARTS_4 default 3 help Select the number of available UART ports for the Samsung S3C @@ -511,12 +518,13 @@ config SERIAL_S3C2412 Serial port support for the Samsung S3C2412 and S3C2413 SoC config SERIAL_S3C2440 - tristate "Samsung S3C2440/S3C2442 Serial port support" - depends on SERIAL_SAMSUNG && (CPU_S3C2440 || CPU_S3C2442) + tristate "Samsung S3C2440/S3C2442/S3C2416 Serial port support" + depends on SERIAL_SAMSUNG && (CPU_S3C2440 || CPU_S3C2442 || CPU_S3C2416) default y if CPU_S3C2440 default y if CPU_S3C2442 + select SERIAL_SAMSUNG_UARTS_4 if CPU_S3C2416 help - Serial port support for the Samsung S3C2440 and S3C2442 SoC + Serial port support for the Samsung S3C2440, S3C2416 and S3C2442 SoC config SERIAL_S3C24A0 tristate "Samsung S3C24A0 Serial port support" @@ -526,19 +534,21 @@ config SERIAL_S3C24A0 Serial port support for the Samsung S3C24A0 SoC config SERIAL_S3C6400 - tristate "Samsung S3C6400/S3C6410 Serial port support" - depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410) + tristate "Samsung S3C6400/S3C6410/S5P6440/S5PC100 Serial port support" + depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 || CPU_S5P6440 || CPU_S5PC100) + select SERIAL_SAMSUNG_UARTS_4 default y help - Serial port support for the Samsung S3C6400 and S3C6410 - SoCs + Serial port support for the Samsung S3C6400, S3C6410, S5P6440 + and S5PC100 SoCs -config SERIAL_S5PC100 - tristate "Samsung S5PC100 Serial port support" - depends on SERIAL_SAMSUNG && CPU_S5PC100 +config SERIAL_S5PV210 + tristate "Samsung S5PV210 Serial port support" + depends on SERIAL_SAMSUNG && (CPU_S5PV210 || CPU_S5P6442) + select SERIAL_SAMSUNG_UARTS_4 if CPU_S5PV210 default y help - Serial port support for the Samsung S5PC100 SoCs + Serial port support for Samsung's S5P Family of SoC's config SERIAL_MAX3100 tristate "MAX3100 support" @@ -996,7 +1006,7 @@ config SERIAL_IP22_ZILOG_CONSOLE config SERIAL_SH_SCI tristate "SuperH SCI(F) serial port support" - depends on HAVE_CLK && (SUPERH || H8300) + depends on HAVE_CLK && (SUPERH || H8300 || ARCH_SHMOBILE) select SERIAL_CORE config SERIAL_SH_SCI_NR_UARTS diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 5548fe7df61..328f107346c 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -44,7 +44,7 @@ obj-$(CONFIG_SERIAL_S3C2412) += s3c2412.o obj-$(CONFIG_SERIAL_S3C2440) += s3c2440.o obj-$(CONFIG_SERIAL_S3C24A0) += s3c24a0.o obj-$(CONFIG_SERIAL_S3C6400) += s3c6400.o -obj-$(CONFIG_SERIAL_S5PC100) += s3c6400.o +obj-$(CONFIG_SERIAL_S5PV210) += s5pv210.o obj-$(CONFIG_SERIAL_MAX3100) += max3100.o obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o obj-$(CONFIG_SERIAL_MUX) += mux.o diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c index 429a8ae8693..b09a638d051 100644 --- a/drivers/serial/amba-pl010.c +++ b/drivers/serial/amba-pl010.c @@ -47,6 +47,7 @@ #include <linux/amba/bus.h> #include <linux/amba/serial.h> #include <linux/clk.h> +#include <linux/slab.h> #include <asm/io.h> @@ -471,6 +472,20 @@ pl010_set_termios(struct uart_port *port, struct ktermios *termios, spin_unlock_irqrestore(&uap->port.lock, flags); } +static void pl010_set_ldisc(struct uart_port *port) +{ + int line = port->line; + + if (line >= port->state->port.tty->driver->num) + return; + + if (port->state->port.tty->ldisc->ops->num == N_PPS) { + port->flags |= UPF_HARDPPS_CD; + pl010_enable_ms(port); + } else + port->flags &= ~UPF_HARDPPS_CD; +} + static const char *pl010_type(struct uart_port *port) { return port->type == PORT_AMBA ? "AMBA" : NULL; @@ -531,6 +546,7 @@ static struct uart_ops amba_pl010_pops = { .startup = pl010_startup, .shutdown = pl010_shutdown, .set_termios = pl010_set_termios, + .set_ldisc = pl010_set_ldisc, .type = pl010_type, .release_port = pl010_release_port, .request_port = pl010_request_port, diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c index ce6c35333ff..743ebf5f16d 100644 --- a/drivers/serial/amba-pl011.c +++ b/drivers/serial/amba-pl011.c @@ -47,6 +47,7 @@ #include <linux/amba/bus.h> #include <linux/amba/serial.h> #include <linux/clk.h> +#include <linux/slab.h> #include <asm/io.h> #include <asm/sizes.h> diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c index 2c9bf9b6832..eed3c2d8dd1 100644 --- a/drivers/serial/atmel_serial.c +++ b/drivers/serial/atmel_serial.c @@ -38,6 +38,7 @@ #include <linux/dma-mapping.h> #include <linux/atmel_pdc.h> #include <linux/atmel_serial.h> +#include <linux/uaccess.h> #include <asm/io.h> @@ -59,6 +60,9 @@ #include <linux/serial_core.h> +static void atmel_start_rx(struct uart_port *port); +static void atmel_stop_rx(struct uart_port *port); + #ifdef CONFIG_SERIAL_ATMEL_TTYAT /* Use device name ttyAT, major 204 and minor 154-169. This is necessary if we @@ -93,6 +97,7 @@ #define UART_GET_BRGR(port) __raw_readl((port)->membase + ATMEL_US_BRGR) #define UART_PUT_BRGR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_BRGR) #define UART_PUT_RTOR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_RTOR) +#define UART_PUT_TTGR(port, v) __raw_writel(v, (port)->membase + ATMEL_US_TTGR) /* PDC registers */ #define UART_PUT_PTCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_PTCR) @@ -147,6 +152,9 @@ struct atmel_uart_port { unsigned int irq_status_prev; struct circ_buf rx_ring; + + struct serial_rs485 rs485; /* rs485 settings */ + unsigned int tx_done_mask; }; static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART]; @@ -187,6 +195,46 @@ static bool atmel_use_dma_tx(struct uart_port *port) } #endif +/* Enable or disable the rs485 support */ +void atmel_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + unsigned int mode; + + spin_lock(&port->lock); + + /* Disable interrupts */ + UART_PUT_IDR(port, atmel_port->tx_done_mask); + + mode = UART_GET_MR(port); + + /* Resetting serial mode to RS232 (0x0) */ + mode &= ~ATMEL_US_USMODE; + + atmel_port->rs485 = *rs485conf; + + if (rs485conf->flags & SER_RS485_ENABLED) { + dev_dbg(port->dev, "Setting UART to RS485\n"); + atmel_port->tx_done_mask = ATMEL_US_TXEMPTY; + UART_PUT_TTGR(port, rs485conf->delay_rts_before_send); + mode |= ATMEL_US_USMODE_RS485; + } else { + dev_dbg(port->dev, "Setting UART to RS232\n"); + if (atmel_use_dma_tx(port)) + atmel_port->tx_done_mask = ATMEL_US_ENDTX | + ATMEL_US_TXBUFE; + else + atmel_port->tx_done_mask = ATMEL_US_TXRDY; + } + UART_PUT_MR(port, mode); + + /* Enable interrupts */ + UART_PUT_IER(port, atmel_port->tx_done_mask); + + spin_unlock(&port->lock); + +} + /* * Return TIOCSER_TEMT when transmitter FIFO and Shift register is empty. */ @@ -202,6 +250,7 @@ static void atmel_set_mctrl(struct uart_port *port, u_int mctrl) { unsigned int control = 0; unsigned int mode; + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); #ifdef CONFIG_ARCH_AT91RM9200 if (cpu_is_at91rm9200()) { @@ -236,6 +285,17 @@ static void atmel_set_mctrl(struct uart_port *port, u_int mctrl) mode |= ATMEL_US_CHMODE_LOC_LOOP; else mode |= ATMEL_US_CHMODE_NORMAL; + + /* Resetting serial mode to RS232 (0x0) */ + mode &= ~ATMEL_US_USMODE; + + if (atmel_port->rs485.flags & SER_RS485_ENABLED) { + dev_dbg(port->dev, "Setting UART to RS485\n"); + UART_PUT_TTGR(port, atmel_port->rs485.delay_rts_before_send); + mode |= ATMEL_US_USMODE_RS485; + } else { + dev_dbg(port->dev, "Setting UART to RS232\n"); + } UART_PUT_MR(port, mode); } @@ -268,12 +328,17 @@ static u_int atmel_get_mctrl(struct uart_port *port) */ static void atmel_stop_tx(struct uart_port *port) { + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + if (atmel_use_dma_tx(port)) { /* disable PDC transmit */ UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS); - UART_PUT_IDR(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE); - } else - UART_PUT_IDR(port, ATMEL_US_TXRDY); + } + /* Disable interrupts */ + UART_PUT_IDR(port, atmel_port->tx_done_mask); + + if (atmel_port->rs485.flags & SER_RS485_ENABLED) + atmel_start_rx(port); } /* @@ -281,17 +346,39 @@ static void atmel_stop_tx(struct uart_port *port) */ static void atmel_start_tx(struct uart_port *port) { + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + if (atmel_use_dma_tx(port)) { if (UART_GET_PTSR(port) & ATMEL_PDC_TXTEN) /* The transmitter is already running. Yes, we really need this.*/ return; - UART_PUT_IER(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE); + if (atmel_port->rs485.flags & SER_RS485_ENABLED) + atmel_stop_rx(port); + /* re-enable PDC transmit */ UART_PUT_PTCR(port, ATMEL_PDC_TXTEN); - } else - UART_PUT_IER(port, ATMEL_US_TXRDY); + } + /* Enable interrupts */ + UART_PUT_IER(port, atmel_port->tx_done_mask); +} + +/* + * start receiving - port is in process of being opened. + */ +static void atmel_start_rx(struct uart_port *port) +{ + UART_PUT_CR(port, ATMEL_US_RSTSTA); /* reset status and receiver */ + + if (atmel_use_dma_rx(port)) { + /* enable PDC controller */ + UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT | + port->read_status_mask); + UART_PUT_PTCR(port, ATMEL_PDC_RXTEN); + } else { + UART_PUT_IER(port, ATMEL_US_RXRDY); + } } /* @@ -302,9 +389,11 @@ static void atmel_stop_rx(struct uart_port *port) if (atmel_use_dma_rx(port)) { /* disable PDC receive */ UART_PUT_PTCR(port, ATMEL_PDC_RXTDIS); - UART_PUT_IDR(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT); - } else + UART_PUT_IDR(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT | + port->read_status_mask); + } else { UART_PUT_IDR(port, ATMEL_US_RXRDY); + } } /* @@ -428,8 +517,9 @@ static void atmel_rx_chars(struct uart_port *port) static void atmel_tx_chars(struct uart_port *port) { struct circ_buf *xmit = &port->state->xmit; + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - if (port->x_char && UART_GET_CSR(port) & ATMEL_US_TXRDY) { + if (port->x_char && UART_GET_CSR(port) & atmel_port->tx_done_mask) { UART_PUT_CHAR(port, port->x_char); port->icount.tx++; port->x_char = 0; @@ -437,7 +527,7 @@ static void atmel_tx_chars(struct uart_port *port) if (uart_circ_empty(xmit) || uart_tx_stopped(port)) return; - while (UART_GET_CSR(port) & ATMEL_US_TXRDY) { + while (UART_GET_CSR(port) & atmel_port->tx_done_mask) { UART_PUT_CHAR(port, xmit->buf[xmit->tail]); xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); port->icount.tx++; @@ -449,7 +539,8 @@ static void atmel_tx_chars(struct uart_port *port) uart_write_wakeup(port); if (!uart_circ_empty(xmit)) - UART_PUT_IER(port, ATMEL_US_TXRDY); + /* Enable interrupts */ + UART_PUT_IER(port, atmel_port->tx_done_mask); } /* @@ -501,18 +592,10 @@ atmel_handle_transmit(struct uart_port *port, unsigned int pending) { struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - if (atmel_use_dma_tx(port)) { - /* PDC transmit */ - if (pending & (ATMEL_US_ENDTX | ATMEL_US_TXBUFE)) { - UART_PUT_IDR(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE); - tasklet_schedule(&atmel_port->tasklet); - } - } else { - /* Interrupt transmit */ - if (pending & ATMEL_US_TXRDY) { - UART_PUT_IDR(port, ATMEL_US_TXRDY); - tasklet_schedule(&atmel_port->tasklet); - } + if (pending & atmel_port->tx_done_mask) { + /* Either PDC or interrupt transmission */ + UART_PUT_IDR(port, atmel_port->tx_done_mask); + tasklet_schedule(&atmel_port->tasklet); } } @@ -590,9 +673,15 @@ static void atmel_tx_dma(struct uart_port *port) UART_PUT_TPR(port, pdc->dma_addr + xmit->tail); UART_PUT_TCR(port, count); - /* re-enable PDC transmit and interrupts */ + /* re-enable PDC transmit */ UART_PUT_PTCR(port, ATMEL_PDC_TXTEN); - UART_PUT_IER(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE); + /* Enable interrupts */ + UART_PUT_IER(port, atmel_port->tx_done_mask); + } else { + if (atmel_port->rs485.flags & SER_RS485_ENABLED) { + /* DMA done, stop TX, start RX for RS485 */ + atmel_start_rx(port); + } } if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) @@ -1017,6 +1106,7 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios, { unsigned long flags; unsigned int mode, imr, quot, baud; + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); /* Get current mode register */ mode = UART_GET_MR(port) & ~(ATMEL_US_USCLKS | ATMEL_US_CHRL @@ -1115,6 +1205,17 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios, /* disable receiver and transmitter */ UART_PUT_CR(port, ATMEL_US_TXDIS | ATMEL_US_RXDIS); + /* Resetting serial mode to RS232 (0x0) */ + mode &= ~ATMEL_US_USMODE; + + if (atmel_port->rs485.flags & SER_RS485_ENABLED) { + dev_dbg(port->dev, "Setting UART to RS485\n"); + UART_PUT_TTGR(port, atmel_port->rs485.delay_rts_before_send); + mode |= ATMEL_US_USMODE_RS485; + } else { + dev_dbg(port->dev, "Setting UART to RS232\n"); + } + /* set the parity, stop bits and data size */ UART_PUT_MR(port, mode); @@ -1231,6 +1332,35 @@ static void atmel_poll_put_char(struct uart_port *port, unsigned char ch) } #endif +static int +atmel_ioctl(struct uart_port *port, unsigned int cmd, unsigned long arg) +{ + struct serial_rs485 rs485conf; + + switch (cmd) { + case TIOCSRS485: + if (copy_from_user(&rs485conf, (struct serial_rs485 *) arg, + sizeof(rs485conf))) + return -EFAULT; + + atmel_config_rs485(port, &rs485conf); + break; + + case TIOCGRS485: + if (copy_to_user((struct serial_rs485 *) arg, + &(to_atmel_uart_port(port)->rs485), + sizeof(rs485conf))) + return -EFAULT; + break; + + default: + return -ENOIOCTLCMD; + } + return 0; +} + + + static struct uart_ops atmel_pops = { .tx_empty = atmel_tx_empty, .set_mctrl = atmel_set_mctrl, @@ -1250,6 +1380,7 @@ static struct uart_ops atmel_pops = { .config_port = atmel_config_port, .verify_port = atmel_verify_port, .pm = atmel_serial_pm, + .ioctl = atmel_ioctl, #ifdef CONFIG_CONSOLE_POLL .poll_get_char = atmel_poll_get_char, .poll_put_char = atmel_poll_put_char, @@ -1265,13 +1396,12 @@ static void __devinit atmel_init_port(struct atmel_uart_port *atmel_port, struct uart_port *port = &atmel_port->uart; struct atmel_uart_data *data = pdev->dev.platform_data; - port->iotype = UPIO_MEM; - port->flags = UPF_BOOT_AUTOCONF; - port->ops = &atmel_pops; - port->fifosize = 1; - port->line = pdev->id; - port->dev = &pdev->dev; - + port->iotype = UPIO_MEM; + port->flags = UPF_BOOT_AUTOCONF; + port->ops = &atmel_pops; + port->fifosize = 1; + port->line = pdev->id; + port->dev = &pdev->dev; port->mapbase = pdev->resource[0].start; port->irq = pdev->resource[1].start; @@ -1299,8 +1429,16 @@ static void __devinit atmel_init_port(struct atmel_uart_port *atmel_port, atmel_port->use_dma_rx = data->use_dma_rx; atmel_port->use_dma_tx = data->use_dma_tx; - if (atmel_use_dma_tx(port)) + atmel_port->rs485 = data->rs485; + /* Use TXEMPTY for interrupt when rs485 else TXRDY or ENDTX|TXBUFE */ + if (atmel_port->rs485.flags & SER_RS485_ENABLED) + atmel_port->tx_done_mask = ATMEL_US_TXEMPTY; + else if (atmel_use_dma_tx(port)) { port->fifosize = PDC_BUFFER_SIZE; + atmel_port->tx_done_mask = ATMEL_US_ENDTX | ATMEL_US_TXBUFE; + } else { + atmel_port->tx_done_mask = ATMEL_US_TXRDY; + } } /* @@ -1334,6 +1472,7 @@ static void atmel_console_putchar(struct uart_port *port, int ch) static void atmel_console_write(struct console *co, const char *s, u_int count) { struct uart_port *port = &atmel_ports[co->index].uart; + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); unsigned int status, imr; unsigned int pdc_tx; @@ -1341,7 +1480,7 @@ static void atmel_console_write(struct console *co, const char *s, u_int count) * First, save IMR and then disable interrupts */ imr = UART_GET_IMR(port); - UART_PUT_IDR(port, ATMEL_US_RXRDY | ATMEL_US_TXRDY); + UART_PUT_IDR(port, ATMEL_US_RXRDY | atmel_port->tx_done_mask); /* Store PDC transmit status and disable it */ pdc_tx = UART_GET_PTSR(port) & ATMEL_PDC_TXTEN; diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index fcf273e3f48..96f7e7484fe 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -14,6 +14,7 @@ #include <linux/module.h> #include <linux/ioport.h> +#include <linux/gfp.h> #include <linux/io.h> #include <linux/init.h> #include <linux/console.h> diff --git a/drivers/serial/bfin_sport_uart.c b/drivers/serial/bfin_sport_uart.c index 7c72888fbf9..c88f8ad3ff8 100644 --- a/drivers/serial/bfin_sport_uart.c +++ b/drivers/serial/bfin_sport_uart.c @@ -28,6 +28,7 @@ #include <linux/init.h> #include <linux/console.h> #include <linux/sysrq.h> +#include <linux/slab.h> #include <linux/platform_device.h> #include <linux/tty.h> #include <linux/tty_flip.h> diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/serial/cpm_uart/cpm_uart_cpm1.c index 1b94c56ec23..3fc1d66e32c 100644 --- a/drivers/serial/cpm_uart/cpm_uart_cpm1.c +++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.c @@ -29,6 +29,7 @@ #include <linux/module.h> #include <linux/tty.h> +#include <linux/gfp.h> #include <linux/ioport.h> #include <linux/init.h> #include <linux/serial.h> diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/serial/cpm_uart/cpm_uart_cpm2.c index a9802e76b5f..814ac006393 100644 --- a/drivers/serial/cpm_uart/cpm_uart_cpm2.c +++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c @@ -30,6 +30,7 @@ #include <linux/module.h> #include <linux/tty.h> #include <linux/ioport.h> +#include <linux/slab.h> #include <linux/init.h> #include <linux/serial.h> #include <linux/console.h> @@ -61,7 +62,7 @@ void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port, void __iomem *pram; unsigned long offset; struct resource res; - unsigned long len; + resource_size_t len; /* Don't remap parameter RAM if it has already been initialized * during console setup. @@ -74,7 +75,7 @@ void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port, if (of_address_to_resource(np, 1, &res)) return NULL; - len = 1 + res.end - res.start; + len = resource_size(&res); pram = ioremap(res.start, len); if (!pram) return NULL; diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index d00fcf8e6c7..eacb588a934 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -46,6 +46,7 @@ #include <linux/clk.h> #include <linux/delay.h> #include <linux/rational.h> +#include <linux/slab.h> #include <asm/io.h> #include <asm/irq.h> @@ -119,7 +120,8 @@ #define MX2_UCR3_RXDMUXSEL (1<<2) /* RXD Muxed Input Select, on mx2/mx3 */ #define UCR3_INVT (1<<1) /* Inverted Infrared transmission */ #define UCR3_BPEN (1<<0) /* Preset registers enable */ -#define UCR4_CTSTL_32 (32<<10) /* CTS trigger level (32 chars) */ +#define UCR4_CTSTL_SHF 10 /* CTS trigger level shift */ +#define UCR4_CTSTL_MASK 0x3F /* CTS trigger is 6 bits wide */ #define UCR4_INVR (1<<9) /* Inverted infrared reception */ #define UCR4_ENIRI (1<<8) /* Serial infrared interrupt enable */ #define UCR4_WKEN (1<<7) /* Wake interrupt enable */ @@ -440,7 +442,7 @@ static irqreturn_t imx_rxint(int irq, void *dev_id) temp = readl(sport->port.membase + USR2); if (temp & USR2_BRCD) { - writel(temp | USR2_BRCD, sport->port.membase + USR2); + writel(USR2_BRCD, sport->port.membase + USR2); if (uart_handle_break(&sport->port)) continue; } @@ -590,6 +592,9 @@ static int imx_setup_ufcr(struct imx_port *sport, unsigned int mode) return 0; } +/* half the RX buffer size */ +#define CTSTL 16 + static int imx_startup(struct uart_port *port) { struct imx_port *sport = (struct imx_port *)port; @@ -606,6 +611,10 @@ static int imx_startup(struct uart_port *port) if (USE_IRDA(sport)) temp |= UCR4_IRSC; + /* set the trigger level for CTS */ + temp &= ~(UCR4_CTSTL_MASK<< UCR4_CTSTL_SHF); + temp |= CTSTL<< UCR4_CTSTL_SHF; + writel(temp & ~UCR4_DREN, sport->port.membase + UCR4); if (USE_IRDA(sport)) { diff --git a/drivers/serial/ioc3_serial.c b/drivers/serial/ioc3_serial.c index 23ba6b40b3a..f164ba4eba0 100644 --- a/drivers/serial/ioc3_serial.c +++ b/drivers/serial/ioc3_serial.c @@ -20,6 +20,7 @@ #include <linux/pci.h> #include <linux/serial_core.h> #include <linux/ioc3.h> +#include <linux/slab.h> /* * Interesting things about the ioc3 diff --git a/drivers/serial/ioc4_serial.c b/drivers/serial/ioc4_serial.c index 836d9ab4f72..8ad28fc6492 100644 --- a/drivers/serial/ioc4_serial.c +++ b/drivers/serial/ioc4_serial.c @@ -22,6 +22,7 @@ #include <linux/pci.h> #include <linux/ioc4.h> #include <linux/serial_core.h> +#include <linux/slab.h> /* * interesting things about the ioc4 diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c index 12cb5e446a4..eaf54501411 100644 --- a/drivers/serial/jsm/jsm_driver.c +++ b/drivers/serial/jsm/jsm_driver.c @@ -26,6 +26,7 @@ ***********************************************************************/ #include <linux/moduleparam.h> #include <linux/pci.h> +#include <linux/slab.h> #include "jsm.h" diff --git a/drivers/serial/jsm/jsm_tty.c b/drivers/serial/jsm/jsm_tty.c index 5673ca9dfdc..7a4a914ecff 100644 --- a/drivers/serial/jsm/jsm_tty.c +++ b/drivers/serial/jsm/jsm_tty.c @@ -30,6 +30,7 @@ #include <linux/serial_reg.h> #include <linux/delay.h> /* For udelay */ #include <linux/pci.h> +#include <linux/slab.h> #include "jsm.h" diff --git a/drivers/serial/max3100.c b/drivers/serial/max3100.c index 3c30c56aa2e..3351c3bd59e 100644 --- a/drivers/serial/max3100.c +++ b/drivers/serial/max3100.c @@ -41,6 +41,7 @@ #define MAX_MAX3100 4 #include <linux/delay.h> +#include <linux/slab.h> #include <linux/device.h> #include <linux/serial_core.h> #include <linux/serial.h> diff --git a/drivers/serial/mcf.c b/drivers/serial/mcf.c index 7bb5fee639e..b5aaef965f2 100644 --- a/drivers/serial/mcf.c +++ b/drivers/serial/mcf.c @@ -263,6 +263,7 @@ static void mcf_set_termios(struct uart_port *port, struct ktermios *termios, } spin_lock_irqsave(&port->lock, flags); + uart_update_timeout(port, termios->c_cflag, baud); writeb(MCFUART_UCR_CMDRESETRX, port->membase + MCFUART_UCR); writeb(MCFUART_UCR_CMDRESETTX, port->membase + MCFUART_UCR); writeb(MCFUART_UCR_CMDRESETMRPTR, port->membase + MCFUART_UCR); @@ -379,6 +380,7 @@ static irqreturn_t mcf_interrupt(int irq, void *data) static void mcf_config_port(struct uart_port *port, int flags) { port->type = PORT_MCF; + port->fifosize = MCFUART_TXFIFOSIZE; /* Clear mask, so no surprise interrupts. */ writeb(0, port->membase + MCFUART_UIMR); @@ -424,7 +426,7 @@ static int mcf_verify_port(struct uart_port *port, struct serial_struct *ser) /* * Define the basic serial functions we support. */ -static struct uart_ops mcf_uart_ops = { +static const struct uart_ops mcf_uart_ops = { .tx_empty = mcf_tx_empty, .get_mctrl = mcf_get_mctrl, .set_mctrl = mcf_set_mctrl, @@ -443,7 +445,7 @@ static struct uart_ops mcf_uart_ops = { .verify_port = mcf_verify_port, }; -static struct mcf_uart mcf_ports[3]; +static struct mcf_uart mcf_ports[4]; #define MCF_MAXPORTS ARRAY_SIZE(mcf_ports) diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c index 3119fddaedb..02469c31bf0 100644 --- a/drivers/serial/mpc52xx_uart.c +++ b/drivers/serial/mpc52xx_uart.c @@ -29,39 +29,6 @@ * kind, whether express or implied. */ -/* Platform device Usage : - * - * Since PSCs can have multiple function, the correct driver for each one - * is selected by calling mpc52xx_match_psc_function(...). The function - * handled by this driver is "uart". - * - * The driver init all necessary registers to place the PSC in uart mode without - * DCD. However, the pin multiplexing aren't changed and should be set either - * by the bootloader or in the platform init code. - * - * The idx field must be equal to the PSC index (e.g. 0 for PSC1, 1 for PSC2, - * and so on). So the PSC1 is mapped to /dev/ttyPSC0, PSC2 to /dev/ttyPSC1 and - * so on. But be warned, it's an ABSOLUTE REQUIREMENT ! This is needed mainly - * fpr the console code : without this 1:1 mapping, at early boot time, when we - * are parsing the kernel args console=ttyPSC?, we wouldn't know which PSC it - * will be mapped to. - */ - -/* OF Platform device Usage : - * - * This driver is only used for PSCs configured in uart mode. The device - * tree will have a node for each PSC with "mpc52xx-psc-uart" in the compatible - * list. - * - * By default, PSC devices are enumerated in the order they are found. However - * a particular PSC number can be forces by adding 'device_no = <port#>' - * to the device node. - * - * The driver init all necessary registers to place the PSC in uart mode without - * DCD. However, the pin multiplexing aren't changed and should be set either - * by the bootloader or in the platform init code. - */ - #undef DEBUG #include <linux/device.h> @@ -1500,7 +1467,7 @@ mpc52xx_uart_init(void) /* * Map the PSC FIFO Controller and init if on MPC512x. */ - if (psc_ops->fifoc_init) { + if (psc_ops && psc_ops->fifoc_init) { ret = psc_ops->fifoc_init(); if (ret) return ret; diff --git a/drivers/serial/mpsc.c b/drivers/serial/mpsc.c index b5496c28e60..55e113a0be0 100644 --- a/drivers/serial/mpsc.c +++ b/drivers/serial/mpsc.c @@ -70,6 +70,7 @@ #include <linux/dma-mapping.h> #include <linux/mv643xx.h> #include <linux/platform_device.h> +#include <linux/gfp.h> #include <asm/io.h> #include <asm/irq.h> diff --git a/drivers/serial/mux.c b/drivers/serial/mux.c index 7571aaa138b..9711e06a837 100644 --- a/drivers/serial/mux.c +++ b/drivers/serial/mux.c @@ -22,7 +22,6 @@ #include <linux/init.h> #include <linux/serial.h> #include <linux/console.h> -#include <linux/slab.h> #include <linux/delay.h> /* for udelay */ #include <linux/device.h> #include <asm/io.h> diff --git a/drivers/serial/of_serial.c b/drivers/serial/of_serial.c index cdf172eda2e..4abfebdb0fc 100644 --- a/drivers/serial/of_serial.c +++ b/drivers/serial/of_serial.c @@ -11,6 +11,7 @@ */ #include <linux/init.h> #include <linux/module.h> +#include <linux/slab.h> #include <linux/serial_core.h> #include <linux/serial_8250.h> #include <linux/of_platform.h> diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c index f020de1cdd5..700e10833bf 100644 --- a/drivers/serial/pmac_zilog.c +++ b/drivers/serial/pmac_zilog.c @@ -54,7 +54,6 @@ #include <linux/delay.h> #include <linux/init.h> #include <linux/console.h> -#include <linux/slab.h> #include <linux/adb.h> #include <linux/pmu.h> #include <linux/bitops.h> @@ -753,8 +752,10 @@ static void pmz_break_ctl(struct uart_port *port, int break_state) uap->curregs[R5] = new_reg; /* NOTE: Not subject to 'transmitter active' rule. */ - if (ZS_IS_ASLEEP(uap)) + if (ZS_IS_ASLEEP(uap)) { + spin_unlock_irqrestore(&port->lock, flags); return; + } write_zsreg(uap, R5, uap->curregs[R5]); } diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c index 56ee082157a..1102a39b44f 100644 --- a/drivers/serial/pxa.c +++ b/drivers/serial/pxa.c @@ -44,6 +44,7 @@ #include <linux/serial_core.h> #include <linux/clk.h> #include <linux/io.h> +#include <linux/slab.h> struct uart_pxa_port { struct uart_port port; diff --git a/drivers/serial/s3c2412.c b/drivers/serial/s3c2412.c index ce75e28e36e..1700b1a2fb7 100644 --- a/drivers/serial/s3c2412.c +++ b/drivers/serial/s3c2412.c @@ -102,6 +102,7 @@ static struct s3c24xx_uart_info s3c2412_uart_inf = { .name = "Samsung S3C2412 UART", .type = PORT_S3C2412, .fifosize = 64, + .has_divslot = 1, .rx_fifomask = S3C2440_UFSTAT_RXMASK, .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, .rx_fifofull = S3C2440_UFSTAT_RXFULL, diff --git a/drivers/serial/s5pv210.c b/drivers/serial/s5pv210.c new file mode 100644 index 00000000000..8dc03837617 --- /dev/null +++ b/drivers/serial/s5pv210.c @@ -0,0 +1,154 @@ +/* linux/drivers/serial/s5pv210.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Based on drivers/serial/s3c6400.c + * + * Driver for Samsung S5PV210 SoC UARTs. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/module.h> +#include <linux/ioport.h> +#include <linux/io.h> +#include <linux/platform_device.h> +#include <linux/init.h> +#include <linux/serial_core.h> +#include <linux/serial.h> + +#include <asm/irq.h> +#include <mach/hardware.h> +#include <plat/regs-serial.h> +#include "samsung.h" + +static int s5pv210_serial_setsource(struct uart_port *port, + struct s3c24xx_uart_clksrc *clk) +{ + unsigned long ucon = rd_regl(port, S3C2410_UCON); + + if (strcmp(clk->name, "pclk") == 0) + ucon &= ~S5PV210_UCON_CLKMASK; + else if (strcmp(clk->name, "uclk1") == 0) + ucon |= S5PV210_UCON_CLKMASK; + else { + printk(KERN_ERR "unknown clock source %s\n", clk->name); + return -EINVAL; + } + + wr_regl(port, S3C2410_UCON, ucon); + return 0; +} + + +static int s5pv210_serial_getsource(struct uart_port *port, + struct s3c24xx_uart_clksrc *clk) +{ + u32 ucon = rd_regl(port, S3C2410_UCON); + + clk->divisor = 1; + + switch (ucon & S5PV210_UCON_CLKMASK) { + case S5PV210_UCON_PCLK: + clk->name = "pclk"; + break; + case S5PV210_UCON_UCLK: + clk->name = "uclk1"; + break; + } + + return 0; +} + +static int s5pv210_serial_resetport(struct uart_port *port, + struct s3c2410_uartcfg *cfg) +{ + unsigned long ucon = rd_regl(port, S3C2410_UCON); + + ucon &= S5PV210_UCON_CLKMASK; + wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); + wr_regl(port, S3C2410_ULCON, cfg->ulcon); + + /* reset both fifos */ + wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); + wr_regl(port, S3C2410_UFCON, cfg->ufcon); + + return 0; +} + +#define S5PV210_UART_DEFAULT_INFO(fifo_size) \ + .name = "Samsung S5PV210 UART0", \ + .type = PORT_S3C6400, \ + .fifosize = fifo_size, \ + .has_divslot = 1, \ + .rx_fifomask = S5PV210_UFSTAT_RXMASK, \ + .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT, \ + .rx_fifofull = S5PV210_UFSTAT_RXFULL, \ + .tx_fifofull = S5PV210_UFSTAT_TXFULL, \ + .tx_fifomask = S5PV210_UFSTAT_TXMASK, \ + .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT, \ + .get_clksrc = s5pv210_serial_getsource, \ + .set_clksrc = s5pv210_serial_setsource, \ + .reset_port = s5pv210_serial_resetport + +static struct s3c24xx_uart_info s5p_port_fifo256 = { + S5PV210_UART_DEFAULT_INFO(256), +}; + +static struct s3c24xx_uart_info s5p_port_fifo64 = { + S5PV210_UART_DEFAULT_INFO(64), +}; + +static struct s3c24xx_uart_info s5p_port_fifo16 = { + S5PV210_UART_DEFAULT_INFO(16), +}; + +static struct s3c24xx_uart_info *s5p_uart_inf[] = { + [0] = &s5p_port_fifo256, + [1] = &s5p_port_fifo64, + [2] = &s5p_port_fifo16, + [3] = &s5p_port_fifo16, +}; + +/* device management */ +static int s5p_serial_probe(struct platform_device *pdev) +{ + return s3c24xx_serial_probe(pdev, s5p_uart_inf[pdev->id]); +} + +static struct platform_driver s5p_serial_drv = { + .probe = s5p_serial_probe, + .remove = __devexit_p(s3c24xx_serial_remove), + .driver = { + .name = "s5pv210-uart", + .owner = THIS_MODULE, + }, +}; + +static int __init s5pv210_serial_console_init(void) +{ + return s3c24xx_serial_initconsole(&s5p_serial_drv, s5p_uart_inf); +} + +console_initcall(s5pv210_serial_console_init); + +static int __init s5p_serial_init(void) +{ + return s3c24xx_serial_init(&s5p_serial_drv, *s5p_uart_inf); +} + +static void __exit s5p_serial_exit(void) +{ + platform_driver_unregister(&s5p_serial_drv); +} + +module_init(s5p_serial_init); +module_exit(s5p_serial_exit); + +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:s5pv210-uart"); +MODULE_DESCRIPTION("Samsung S5PV210 UART Driver support"); +MODULE_AUTHOR("Thomas Abraham <thomas.ab@samsung.com>"); diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c index 52e3df113ec..a9d6c5626a0 100644 --- a/drivers/serial/samsung.c +++ b/drivers/serial/samsung.c @@ -1271,7 +1271,7 @@ s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon) unsigned long ufstat, utrstat; if (ufcon & S3C2410_UFCON_FIFOMODE) { - /* fifo mode - check ammount of data in fifo registers... */ + /* fifo mode - check amount of data in fifo registers... */ ufstat = rd_regl(port, S3C2410_UFSTAT); return (ufstat & info->tx_fifofull) ? 0 : 1; @@ -1374,7 +1374,7 @@ s3c24xx_serial_get_options(struct uart_port *port, int *baud, * data. */ -static int s3c24xx_serial_init_ports(struct s3c24xx_uart_info *info) +static int s3c24xx_serial_init_ports(struct s3c24xx_uart_info **info) { struct s3c24xx_uart_port *ptr = s3c24xx_serial_ports; struct platform_device **platdev_ptr; @@ -1385,7 +1385,7 @@ static int s3c24xx_serial_init_ports(struct s3c24xx_uart_info *info) platdev_ptr = s3c24xx_uart_devs; for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++, ptr++, platdev_ptr++) { - s3c24xx_serial_init_port(ptr, info, *platdev_ptr); + s3c24xx_serial_init_port(ptr, info[i], *platdev_ptr); } return 0; @@ -1451,7 +1451,7 @@ static struct console s3c24xx_serial_console = { }; int s3c24xx_serial_initconsole(struct platform_driver *drv, - struct s3c24xx_uart_info *info) + struct s3c24xx_uart_info **info) { struct platform_device *dev = s3c24xx_uart_devs[0]; diff --git a/drivers/serial/samsung.h b/drivers/serial/samsung.h index 1fb22343df4..0ac06a07d25 100644 --- a/drivers/serial/samsung.h +++ b/drivers/serial/samsung.h @@ -75,19 +75,24 @@ extern int s3c24xx_serial_probe(struct platform_device *dev, extern int __devexit s3c24xx_serial_remove(struct platform_device *dev); extern int s3c24xx_serial_initconsole(struct platform_driver *drv, - struct s3c24xx_uart_info *uart); + struct s3c24xx_uart_info **uart); extern int s3c24xx_serial_init(struct platform_driver *drv, struct s3c24xx_uart_info *info); #ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE -#define s3c24xx_console_init(__drv, __inf) \ -static int __init s3c_serial_console_init(void) \ -{ \ - return s3c24xx_serial_initconsole(__drv, __inf); \ -} \ - \ +#define s3c24xx_console_init(__drv, __inf) \ +static int __init s3c_serial_console_init(void) \ +{ \ + struct s3c24xx_uart_info *uinfo[CONFIG_SERIAL_SAMSUNG_UARTS]; \ + int i; \ + \ + for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++) \ + uinfo[i] = __inf; \ + return s3c24xx_serial_initconsole(__drv, uinfo); \ +} \ + \ console_initcall(s3c_serial_console_init) #else diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c index e91db4b3801..dadd686c980 100644 --- a/drivers/serial/serial_cs.c +++ b/drivers/serial/serial_cs.c @@ -89,7 +89,6 @@ struct serial_info { int manfid; int prodid; int c950ctrl; - dev_node_t node[4]; int line[4]; const struct serial_quirk *quirk; }; @@ -105,6 +104,10 @@ struct serial_cfg_mem { * manfid 0x0160, 0x0104 * This card appears to have a 14.7456MHz clock. */ +/* Generic Modem: MD55x (GPRS/EDGE) have + * Elan VPU16551 UART with 14.7456MHz oscillator + * manfid 0x015D, 0x4C45 + */ static void quirk_setup_brainboxes_0104(struct pcmcia_device *link, struct uart_port *port) { port->uartclk = 14745600; @@ -196,6 +199,11 @@ static const struct serial_quirk quirks[] = { .multi = -1, .setup = quirk_setup_brainboxes_0104, }, { + .manfid = 0x015D, + .prodid = 0x4C45, + .multi = -1, + .setup = quirk_setup_brainboxes_0104, + }, { .manfid = MANFID_IBM, .prodid = ~0, .multi = -1, @@ -280,8 +288,6 @@ static void serial_remove(struct pcmcia_device *link) for (i = 0; i < info->ndev; i++) serial8250_unregister_port(info->line[i]); - info->p_dev->dev_node = NULL; - if (!info->slave) pcmcia_disable_device(link); } @@ -334,7 +340,6 @@ static int serial_probe(struct pcmcia_device *link) link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; link->io.NumPorts1 = 8; - link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; link->conf.Attributes = CONF_ENABLE_IRQ; if (do_sound) { link->conf.Attributes |= CONF_ENABLE_SPKR; @@ -402,11 +407,6 @@ static int setup_serial(struct pcmcia_device *handle, struct serial_info * info, } info->line[info->ndev] = line; - sprintf(info->node[info->ndev].dev_name, "ttyS%d", line); - info->node[info->ndev].major = TTY_MAJOR; - info->node[info->ndev].minor = 0x40 + line; - if (info->ndev > 0) - info->node[info->ndev - 1].next = &info->node[info->ndev]; info->ndev++; return 0; @@ -477,7 +477,7 @@ static int simple_config(struct pcmcia_device *link) } if (info->slave) { return setup_serial(link, info, port, - link->irq.AssignedIRQ); + link->irq); } } @@ -498,10 +498,6 @@ static int simple_config(struct pcmcia_device *link) return -1; found_port: - i = pcmcia_request_irq(link, &link->irq); - if (i != 0) - link->irq.AssignedIRQ = 0; - if (info->multi && (info->manfid == MANFID_3COM)) link->conf.ConfigIndex &= ~(0x08); @@ -514,7 +510,7 @@ found_port: i = pcmcia_request_configuration(link, &link->conf); if (i != 0) return -1; - return setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ); + return setup_serial(link, info, link->io.BasePort1, link->irq); } static int multi_config_check(struct pcmcia_device *p_dev, @@ -577,13 +573,9 @@ static int multi_config(struct pcmcia_device *link) } } - i = pcmcia_request_irq(link, &link->irq); - if (i != 0) { - /* FIXME: comment does not fit, error handling does not fit */ - printk(KERN_NOTICE - "serial_cs: no usable port range found, giving up\n"); - link->irq.AssignedIRQ = 0; - } + if (!link->irq) + dev_warn(&link->dev, + "serial_cs: no usable IRQ found, continuing...\n"); /* * Apply any configuration quirks. @@ -606,11 +598,11 @@ static int multi_config(struct pcmcia_device *link) if (link->conf.ConfigIndex == 1 || link->conf.ConfigIndex == 3) { err = setup_serial(link, info, base2, - link->irq.AssignedIRQ); + link->irq); base2 = link->io.BasePort1; } else { err = setup_serial(link, info, link->io.BasePort1, - link->irq.AssignedIRQ); + link->irq); } info->c950ctrl = base2; @@ -624,10 +616,10 @@ static int multi_config(struct pcmcia_device *link) return 0; } - setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ); + setup_serial(link, info, link->io.BasePort1, link->irq); for (i = 0; i < info->multi - 1; i++) setup_serial(link, info, base2 + (8 * i), - link->irq.AssignedIRQ); + link->irq); return 0; } @@ -711,7 +703,6 @@ static int serial_config(struct pcmcia_device * link) if (info->quirk->post(link)) goto failed; - link->dev_node = &info->node[0]; return 0; failed: @@ -745,6 +736,7 @@ static struct pcmcia_device_id serial_ids[] = { PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29), PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719), PCMCIA_PFC_DEVICE_PROD_ID12(1, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "ATKK", "LM33-PCM-T", 0xba9eb7e2, 0x077c174e), PCMCIA_PFC_DEVICE_PROD_ID12(1, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff), PCMCIA_PFC_DEVICE_PROD_ID12(1, "Gateway 2000", "XJEM3336", 0xdd9989be, 0x662c394c), PCMCIA_PFC_DEVICE_PROD_ID12(1, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae), diff --git a/drivers/serial/serial_ks8695.c b/drivers/serial/serial_ks8695.c index 2e71bbc04da..b1962025b1a 100644 --- a/drivers/serial/serial_ks8695.c +++ b/drivers/serial/serial_ks8695.c @@ -650,6 +650,7 @@ static struct console ks8695_console = { static int __init ks8695_console_init(void) { + add_preferred_console(SERIAL_KS8695_DEVNAME, 0, NULL); register_console(&ks8695_console); return 0; } diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 980f39449ee..8d993c4ccea 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -50,7 +50,7 @@ #include <linux/list.h> #include <linux/dmaengine.h> #include <linux/scatterlist.h> -#include <linux/timer.h> +#include <linux/slab.h> #ifdef CONFIG_SUPERH #include <asm/sh_bios.h> @@ -83,16 +83,16 @@ struct sci_port { /* Interface clock */ struct clk *iclk; - /* Data clock */ - struct clk *dclk; + /* Function clock */ + struct clk *fclk; struct list_head node; struct dma_chan *chan_tx; struct dma_chan *chan_rx; #ifdef CONFIG_SERIAL_SH_SCI_DMA struct device *dma_dev; - enum sh_dmae_slave_chan_id slave_tx; - enum sh_dmae_slave_chan_id slave_rx; + unsigned int slave_tx; + unsigned int slave_rx; struct dma_async_tx_descriptor *desc_tx; struct dma_async_tx_descriptor *desc_rx[2]; dma_cookie_t cookie_tx; @@ -107,6 +107,7 @@ struct sci_port { struct work_struct work_tx; struct work_struct work_rx; struct timer_list rx_timer; + unsigned int rx_timeout; #endif }; @@ -674,22 +675,22 @@ static irqreturn_t sci_rx_interrupt(int irq, void *ptr) struct sci_port *s = to_sci_port(port); if (s->chan_rx) { - unsigned long tout; u16 scr = sci_in(port, SCSCR); u16 ssr = sci_in(port, SCxSR); /* Disable future Rx interrupts */ - sci_out(port, SCSCR, scr & ~SCI_CTRL_FLAGS_RIE); + if (port->type == PORT_SCIFA) { + disable_irq_nosync(irq); + scr |= 0x4000; + } else { + scr &= ~SCI_CTRL_FLAGS_RIE; + } + sci_out(port, SCSCR, scr); /* Clear current interrupt */ sci_out(port, SCxSR, ssr & ~(1 | SCxSR_RDxF(port))); - /* Calculate delay for 1.5 DMA buffers */ - tout = (port->timeout - HZ / 50) * s->buf_len_rx * 3 / - port->fifosize / 2; - dev_dbg(port->dev, "Rx IRQ: setup timeout in %lu ms\n", - tout * 1000 / HZ); - if (tout < 2) - tout = 2; - mod_timer(&s->rx_timer, jiffies + tout); + dev_dbg(port->dev, "Rx IRQ %lu: setup t-out in %u jiffies\n", + jiffies, s->rx_timeout); + mod_timer(&s->rx_timer, jiffies + s->rx_timeout); return IRQ_HANDLED; } @@ -780,10 +781,6 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr) if ((ssr_status & SCxSR_BRK(port)) && err_enabled) ret = sci_br_interrupt(irq, ptr); - WARN_ONCE(ret == IRQ_NONE, - "%s: %d IRQ %d, status %x, control %x\n", __func__, - irq, port->line, ssr_status, scr_status); - return ret; } @@ -803,7 +800,7 @@ static int sci_notifier(struct notifier_block *self, (phase == CPUFREQ_RESUMECHANGE)) { spin_lock_irqsave(&priv->lock, flags); list_for_each_entry(sci_port, &priv->ports, node) - sci_port->port.uartclk = clk_get_rate(sci_port->dclk); + sci_port->port.uartclk = clk_get_rate(sci_port->iclk); spin_unlock_irqrestore(&priv->lock, flags); } @@ -814,21 +811,17 @@ static void sci_clk_enable(struct uart_port *port) { struct sci_port *sci_port = to_sci_port(port); - clk_enable(sci_port->dclk); - sci_port->port.uartclk = clk_get_rate(sci_port->dclk); - - if (sci_port->iclk) - clk_enable(sci_port->iclk); + clk_enable(sci_port->iclk); + sci_port->port.uartclk = clk_get_rate(sci_port->iclk); + clk_enable(sci_port->fclk); } static void sci_clk_disable(struct uart_port *port) { struct sci_port *sci_port = to_sci_port(port); - if (sci_port->iclk) - clk_disable(sci_port->iclk); - - clk_disable(sci_port->dclk); + clk_disable(sci_port->fclk); + clk_disable(sci_port->iclk); } static int sci_request_irq(struct sci_port *port) @@ -917,22 +910,26 @@ static void sci_dma_tx_complete(void *arg) spin_lock_irqsave(&port->lock, flags); - xmit->tail += s->sg_tx.length; + xmit->tail += sg_dma_len(&s->sg_tx); xmit->tail &= UART_XMIT_SIZE - 1; - port->icount.tx += s->sg_tx.length; + port->icount.tx += sg_dma_len(&s->sg_tx); async_tx_ack(s->desc_tx); s->cookie_tx = -EINVAL; s->desc_tx = NULL; - spin_unlock_irqrestore(&port->lock, flags); - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(port); - if (uart_circ_chars_pending(xmit)) + if (!uart_circ_empty(xmit)) { schedule_work(&s->work_tx); + } else if (port->type == PORT_SCIFA) { + u16 ctrl = sci_in(port, SCSCR); + sci_out(port, SCSCR, ctrl & ~SCI_CTRL_FLAGS_TIE); + } + + spin_unlock_irqrestore(&port->lock, flags); } /* Locking: called with port lock held */ @@ -976,13 +973,13 @@ static void sci_dma_rx_complete(void *arg) unsigned long flags; int count; - dev_dbg(port->dev, "%s(%d)\n", __func__, port->line); + dev_dbg(port->dev, "%s(%d) active #%d\n", __func__, port->line, s->active_rx); spin_lock_irqsave(&port->lock, flags); count = sci_dma_rx_push(s, tty, s->buf_len_rx); - mod_timer(&s->rx_timer, jiffies + msecs_to_jiffies(5)); + mod_timer(&s->rx_timer, jiffies + s->rx_timeout); spin_unlock_irqrestore(&port->lock, flags); @@ -1054,6 +1051,8 @@ static void sci_submit_rx(struct sci_port *s) sci_rx_dma_release(s, true); return; } + dev_dbg(s->port.dev, "%s(): cookie %d to #%d\n", __func__, + s->cookie_rx[i], i); } s->active_rx = s->cookie_rx[0]; @@ -1111,10 +1110,10 @@ static void work_fn_rx(struct work_struct *work) return; } - dev_dbg(port->dev, "%s: cookie %d #%d\n", __func__, - s->cookie_rx[new], new); - s->active_rx = s->cookie_rx[!new]; + + dev_dbg(port->dev, "%s: cookie %d #%d, new active #%d\n", __func__, + s->cookie_rx[new], new, s->active_rx); } static void work_fn_tx(struct work_struct *work) @@ -1135,14 +1134,13 @@ static void work_fn_tx(struct work_struct *work) */ spin_lock_irq(&port->lock); sg->offset = xmit->tail & (UART_XMIT_SIZE - 1); - sg->dma_address = (sg_dma_address(sg) & ~(UART_XMIT_SIZE - 1)) + + sg_dma_address(sg) = (sg_dma_address(sg) & ~(UART_XMIT_SIZE - 1)) + sg->offset; - sg->length = min((int)CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE), + sg_dma_len(sg) = min((int)CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE), CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE)); - sg->dma_length = sg->length; spin_unlock_irq(&port->lock); - BUG_ON(!sg->length); + BUG_ON(!sg_dma_len(sg)); desc = chan->device->device_prep_slave_sg(chan, sg, s->sg_len_tx, DMA_TO_DEVICE, @@ -1177,23 +1175,28 @@ static void work_fn_tx(struct work_struct *work) static void sci_start_tx(struct uart_port *port) { + struct sci_port *s = to_sci_port(port); unsigned short ctrl; #ifdef CONFIG_SERIAL_SH_SCI_DMA - struct sci_port *s = to_sci_port(port); - - if (s->chan_tx) { - if (!uart_circ_empty(&s->port.state->xmit) && s->cookie_tx < 0) - schedule_work(&s->work_tx); - - return; + if (port->type == PORT_SCIFA) { + u16 new, scr = sci_in(port, SCSCR); + if (s->chan_tx) + new = scr | 0x8000; + else + new = scr & ~0x8000; + if (new != scr) + sci_out(port, SCSCR, new); } + if (s->chan_tx && !uart_circ_empty(&s->port.state->xmit) && + s->cookie_tx < 0) + schedule_work(&s->work_tx); #endif - - /* Set TIE (Transmit Interrupt Enable) bit in SCSCR */ - ctrl = sci_in(port, SCSCR); - ctrl |= SCI_CTRL_FLAGS_TIE; - sci_out(port, SCSCR, ctrl); + if (!s->chan_tx || port->type == PORT_SCIFA) { + /* Set TIE (Transmit Interrupt Enable) bit in SCSCR */ + ctrl = sci_in(port, SCSCR); + sci_out(port, SCSCR, ctrl | SCI_CTRL_FLAGS_TIE); + } } static void sci_stop_tx(struct uart_port *port) @@ -1202,6 +1205,8 @@ static void sci_stop_tx(struct uart_port *port) /* Clear TIE (Transmit Interrupt Enable) bit in SCSCR */ ctrl = sci_in(port, SCSCR); + if (port->type == PORT_SCIFA) + ctrl &= ~0x8000; ctrl &= ~SCI_CTRL_FLAGS_TIE; sci_out(port, SCSCR, ctrl); } @@ -1212,6 +1217,8 @@ static void sci_start_rx(struct uart_port *port) /* Set RIE (Receive Interrupt Enable) bit in SCSCR */ ctrl |= sci_in(port, SCSCR); + if (port->type == PORT_SCIFA) + ctrl &= ~0x4000; sci_out(port, SCSCR, ctrl); } @@ -1221,6 +1228,8 @@ static void sci_stop_rx(struct uart_port *port) /* Clear RIE (Receive Interrupt Enable) bit in SCSCR */ ctrl = sci_in(port, SCSCR); + if (port->type == PORT_SCIFA) + ctrl &= ~0x4000; ctrl &= ~(SCI_CTRL_FLAGS_RIE | SCI_CTRL_FLAGS_REIE); sci_out(port, SCSCR, ctrl); } @@ -1255,8 +1264,12 @@ static void rx_timer_fn(unsigned long arg) { struct sci_port *s = (struct sci_port *)arg; struct uart_port *port = &s->port; - u16 scr = sci_in(port, SCSCR); + + if (port->type == PORT_SCIFA) { + scr &= ~0x4000; + enable_irq(s->irqs[1]); + } sci_out(port, SCSCR, scr | SCI_CTRL_FLAGS_RIE); dev_dbg(port->dev, "DMA Rx timed out\n"); schedule_work(&s->work_rx); @@ -1343,8 +1356,7 @@ static void sci_request_dma(struct uart_port *port) sg_init_table(sg, 1); sg_set_page(sg, virt_to_page(buf[i]), s->buf_len_rx, (int)buf[i] & ~PAGE_MASK); - sg->dma_address = dma[i]; - sg->dma_length = sg->length; + sg_dma_address(sg) = dma[i]; } INIT_WORK(&s->work_rx, work_fn_rx); @@ -1407,8 +1419,12 @@ static void sci_shutdown(struct uart_port *port) static void sci_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) { +#ifdef CONFIG_SERIAL_SH_SCI_DMA + struct sci_port *s = to_sci_port(port); +#endif unsigned int status, baud, smr_val, max_baud; int t = -1; + u16 scfcr = 0; /* * earlyprintk comes here early on with port->uartclk set to zero. @@ -1431,7 +1447,7 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios, sci_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */ if (port->type != PORT_SCI) - sci_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST); + sci_out(port, SCFCR, scfcr | SCFCR_RFRST | SCFCR_TFRST); smr_val = sci_in(port, SCSMR) & 3; if ((termios->c_cflag & CSIZE) == CS7) @@ -1462,10 +1478,32 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios, } sci_init_pins(port, termios->c_cflag); - sci_out(port, SCFCR, (termios->c_cflag & CRTSCTS) ? SCFCR_MCE : 0); + sci_out(port, SCFCR, scfcr | ((termios->c_cflag & CRTSCTS) ? SCFCR_MCE : 0)); sci_out(port, SCSCR, SCSCR_INIT(port)); +#ifdef CONFIG_SERIAL_SH_SCI_DMA + /* + * Calculate delay for 1.5 DMA buffers: see + * drivers/serial/serial_core.c::uart_update_timeout(). With 10 bits + * (CS8), 250Hz, 115200 baud and 64 bytes FIFO, the above function + * calculates 1 jiffie for the data plus 5 jiffies for the "slop(e)." + * Then below we calculate 3 jiffies (12ms) for 1.5 DMA buffers (3 FIFO + * sizes), but it has been found out experimentally, that this is not + * enough: the driver too often needlessly runs on a DMA timeout. 20ms + * as a minimum seem to work perfectly. + */ + if (s->chan_rx) { + s->rx_timeout = (port->timeout - HZ / 50) * s->buf_len_rx * 3 / + port->fifosize / 2; + dev_dbg(port->dev, + "DMA Rx t-out %ums, tty t-out %u jiffies\n", + s->rx_timeout * 1000 / HZ, port->timeout); + if (s->rx_timeout < msecs_to_jiffies(20)) + s->rx_timeout = msecs_to_jiffies(20); + } +#endif + if ((termios->c_cflag & CREAD) != 0) sci_start_rx(port); } @@ -1557,10 +1595,10 @@ static struct uart_ops sci_uart_ops = { #endif }; -static void __devinit sci_init_single(struct platform_device *dev, - struct sci_port *sci_port, - unsigned int index, - struct plat_sci_port *p) +static int __devinit sci_init_single(struct platform_device *dev, + struct sci_port *sci_port, + unsigned int index, + struct plat_sci_port *p) { struct uart_port *port = &sci_port->port; @@ -1581,8 +1619,23 @@ static void __devinit sci_init_single(struct platform_device *dev, } if (dev) { - sci_port->iclk = p->clk ? clk_get(&dev->dev, p->clk) : NULL; - sci_port->dclk = clk_get(&dev->dev, "peripheral_clk"); + sci_port->iclk = clk_get(&dev->dev, "sci_ick"); + if (IS_ERR(sci_port->iclk)) { + sci_port->iclk = clk_get(&dev->dev, "peripheral_clk"); + if (IS_ERR(sci_port->iclk)) { + dev_err(&dev->dev, "can't get iclk\n"); + return PTR_ERR(sci_port->iclk); + } + } + + /* + * The function clock is optional, ignore it if we can't + * find it. + */ + sci_port->fclk = clk_get(&dev->dev, "sci_fck"); + if (IS_ERR(sci_port->fclk)) + sci_port->fclk = NULL; + sci_port->enable = sci_clk_enable; sci_port->disable = sci_clk_disable; port->dev = &dev->dev; @@ -1609,6 +1662,7 @@ static void __devinit sci_init_single(struct platform_device *dev, #endif memcpy(&sci_port->irqs, &p->irqs, sizeof(p->irqs)); + return 0; } #ifdef CONFIG_SERIAL_SH_SCI_CONSOLE @@ -1758,8 +1812,11 @@ static int sci_remove(struct platform_device *dev) cpufreq_unregister_notifier(&priv->clk_nb, CPUFREQ_TRANSITION_NOTIFIER); spin_lock_irqsave(&priv->lock, flags); - list_for_each_entry(p, &priv->ports, node) + list_for_each_entry(p, &priv->ports, node) { uart_remove_one_port(&sci_uart_driver, &p->port); + clk_put(p->iclk); + clk_put(p->fclk); + } spin_unlock_irqrestore(&priv->lock, flags); kfree(priv); @@ -1785,7 +1842,9 @@ static int __devinit sci_probe_single(struct platform_device *dev, return 0; } - sci_init_single(dev, sciport, index, p); + ret = sci_init_single(dev, sciport, index, p); + if (ret) + return ret; ret = uart_add_one_port(&sci_uart_driver, &sciport->port); if (ret) diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index f7d2589926d..f70c49f915f 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -30,7 +30,10 @@ */ # define SCSCR_INIT(port) (port->mapbase == SCIF2) ? 0xF3 : 0xF0 #elif defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) + defined(CONFIG_CPU_SUBTYPE_SH7721) || \ + defined(CONFIG_ARCH_SH7367) || \ + defined(CONFIG_ARCH_SH7377) || \ + defined(CONFIG_ARCH_SH7372) # define SCSCR_INIT(port) 0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */ # define PORT_PTCR 0xA405011EUL # define PORT_PVCR 0xA4050122UL @@ -93,7 +96,9 @@ # define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ #elif defined(CONFIG_CPU_SUBTYPE_SH7724) # define SCIF_ORER 0x0001 /* overrun error bit */ -# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ +# define SCSCR_INIT(port) ((port)->type == PORT_SCIFA ? \ + 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ : \ + 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ ) #elif defined(CONFIG_CPU_SUBTYPE_SH4_202) # define SCSPTR2 0xffe80020 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* overrun error bit */ @@ -196,6 +201,8 @@ defined(CONFIG_CPU_SUBTYPE_SH7786) || \ defined(CONFIG_CPU_SUBTYPE_SHX3) #define SCI_CTRL_FLAGS_REIE 0x08 /* 7750 SCIF */ +#elif defined(CONFIG_CPU_SUBTYPE_SH7724) +#define SCI_CTRL_FLAGS_REIE ((port)->type == PORT_SCIFA ? 0 : 8) #else #define SCI_CTRL_FLAGS_REIE 0 #endif @@ -228,7 +235,10 @@ #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) + defined(CONFIG_CPU_SUBTYPE_SH7721) || \ + defined(CONFIG_ARCH_SH7367) || \ + defined(CONFIG_ARCH_SH7377) || \ + defined(CONFIG_ARCH_SH7372) # define SCIF_ORER 0x0200 # define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK | SCIF_ORER) # define SCIF_RFDC_MASK 0x007f @@ -261,7 +271,10 @@ #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) + defined(CONFIG_CPU_SUBTYPE_SH7721) || \ + defined(CONFIG_ARCH_SH7367) || \ + defined(CONFIG_ARCH_SH7377) || \ + defined(CONFIG_ARCH_SH7372) # define SCxSR_RDxF_CLEAR(port) (sci_in(port, SCxSR) & 0xfffc) # define SCxSR_ERROR_CLEAR(port) (sci_in(port, SCxSR) & 0xfd73) # define SCxSR_TDxE_CLEAR(port) (sci_in(port, SCxSR) & 0xffdf) @@ -356,7 +369,10 @@ SCI_OUT(sci_size, sci_offset, value); \ } -#ifdef CONFIG_CPU_SH3 +#if defined(CONFIG_CPU_SH3) || \ + defined(CONFIG_ARCH_SH7367) || \ + defined(CONFIG_ARCH_SH7377) || \ + defined(CONFIG_ARCH_SH7372) #if defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) #define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \ sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \ @@ -366,7 +382,10 @@ CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size) #elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \ defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) + defined(CONFIG_CPU_SUBTYPE_SH7721) || \ + defined(CONFIG_ARCH_SH7367) || \ + defined(CONFIG_ARCH_SH7377) || \ + defined(CONFIG_ARCH_SH7372) #define SCIF_FNS(name, scif_offset, scif_size) \ CPU_SCIF_FNS(name, scif_offset, scif_size) #else @@ -401,7 +420,10 @@ #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) + defined(CONFIG_CPU_SUBTYPE_SH7721) || \ + defined(CONFIG_ARCH_SH7367) || \ + defined(CONFIG_ARCH_SH7377) || \ + defined(CONFIG_ARCH_SH7372) SCIF_FNS(SCSMR, 0x00, 16) SCIF_FNS(SCBRR, 0x04, 8) @@ -413,7 +435,7 @@ SCIF_FNS(SCFCR, 0x18, 16) SCIF_FNS(SCFDR, 0x1c, 16) SCIF_FNS(SCxTDR, 0x20, 8) SCIF_FNS(SCxRDR, 0x24, 8) -SCIF_FNS(SCLSR, 0x24, 16) +SCIF_FNS(SCLSR, 0x00, 0) #elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\ defined(CONFIG_CPU_SUBTYPE_SH7724) SCIx_FNS(SCSMR, 0x00, 16, 0x00, 16) @@ -583,7 +605,10 @@ static inline int sci_rxd_in(struct uart_port *port) #define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(16*bps)-1) #elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \ defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) + defined(CONFIG_CPU_SUBTYPE_SH7721) || \ + defined(CONFIG_ARCH_SH7367) || \ + defined(CONFIG_ARCH_SH7377) || \ + defined(CONFIG_ARCH_SH7372) #define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1) #elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\ defined(CONFIG_CPU_SUBTYPE_SH7724) diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c index d514e28d075..d2e0321049e 100644 --- a/drivers/serial/sunsab.c +++ b/drivers/serial/sunsab.c @@ -474,7 +474,7 @@ static void sunsab_stop_rx(struct uart_port *port) { struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; - up->interrupt_mask0 |= SAB82532_ISR0_TCD; + up->interrupt_mask0 |= SAB82532_IMR0_TCD; writeb(up->interrupt_mask1, &up->regs->w.imr0); } diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c index 170d3d68c8f..01f7731e59b 100644 --- a/drivers/serial/sunsu.c +++ b/drivers/serial/sunsu.c @@ -29,6 +29,7 @@ #include <linux/serial.h> #include <linux/sysrq.h> #include <linux/console.h> +#include <linux/slab.h> #ifdef CONFIG_SERIO #include <linux/serio.h> #endif @@ -1453,8 +1454,10 @@ static int __devinit su_probe(struct of_device *op, const struct of_device_id *m if (up->su_type == SU_PORT_KBD || up->su_type == SU_PORT_MS) { err = sunsu_kbd_ms_init(up); if (err) { + of_iounmap(&op->resource[0], + up->port.membase, up->reg_size); kfree(up); - goto out_unmap; + return err; } dev_set_drvdata(&op->dev, up); diff --git a/drivers/serial/timbuart.c b/drivers/serial/timbuart.c index 7bf10264a6a..786ba85c170 100644 --- a/drivers/serial/timbuart.c +++ b/drivers/serial/timbuart.c @@ -26,6 +26,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/ioport.h> +#include <linux/slab.h> #include "timbuart.h" diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c index ab2ab3c8183..f0a6c61b17f 100644 --- a/drivers/serial/uartlite.c +++ b/drivers/serial/uartlite.c @@ -19,7 +19,7 @@ #include <linux/interrupt.h> #include <linux/init.h> #include <asm/io.h> -#if defined(CONFIG_OF) +#if defined(CONFIG_OF) && (defined(CONFIG_PPC32) || defined(CONFIG_MICROBLAZE)) #include <linux/of.h> #include <linux/of_device.h> #include <linux/of_platform.h> @@ -581,7 +581,7 @@ static struct platform_driver ulite_platform_driver = { /* --------------------------------------------------------------------- * OF bus bindings */ -#if defined(CONFIG_OF) +#if defined(CONFIG_OF) && (defined(CONFIG_PPC32) || defined(CONFIG_MICROBLAZE)) static int __devinit ulite_of_probe(struct of_device *op, const struct of_device_id *match) { @@ -631,11 +631,11 @@ static inline void __exit ulite_of_unregister(void) { of_unregister_platform_driver(&ulite_of_driver); } -#else /* CONFIG_OF */ -/* CONFIG_OF not enabled; do nothing helpers */ +#else /* CONFIG_OF && (CONFIG_PPC32 || CONFIG_MICROBLAZE) */ +/* Appropriate config not enabled; do nothing helpers */ static inline int __init ulite_of_register(void) { return 0; } static inline void __exit ulite_of_unregister(void) { } -#endif /* CONFIG_OF */ +#endif /* CONFIG_OF && (CONFIG_PPC32 || CONFIG_MICROBLAZE) */ /* --------------------------------------------------------------------- * Module setup/teardown diff --git a/drivers/serial/ucc_uart.c b/drivers/serial/ucc_uart.c index 465f2fae102..074904912f6 100644 --- a/drivers/serial/ucc_uart.c +++ b/drivers/serial/ucc_uart.c @@ -20,6 +20,7 @@ #include <linux/module.h> #include <linux/serial.h> +#include <linux/slab.h> #include <linux/serial_core.h> #include <linux/io.h> #include <linux/of_platform.h> |