diff options
Diffstat (limited to 'drivers/serial/serial_core.c')
| -rw-r--r-- | drivers/serial/serial_core.c | 880 |
1 files changed, 449 insertions, 431 deletions
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index b0bb29d804a..1689bda1d13 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -29,10 +29,10 @@ #include <linux/console.h> #include <linux/proc_fs.h> #include <linux/seq_file.h> -#include <linux/serial_core.h> #include <linux/smp_lock.h> #include <linux/device.h> #include <linux/serial.h> /* for serial_state and serial_icounter_struct */ +#include <linux/serial_core.h> #include <linux/delay.h> #include <linux/mutex.h> @@ -52,8 +52,6 @@ static struct lock_class_key port_lock_key; #define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8) -#define uart_users(state) ((state)->count + (state)->info.port.blocked_open) - #ifdef CONFIG_SERIAL_CORE_CONSOLE #define uart_console(port) ((port)->cons && (port)->cons->index == (port)->line) #else @@ -71,19 +69,19 @@ static void uart_change_pm(struct uart_state *state, int pm_state); */ void uart_write_wakeup(struct uart_port *port) { - struct uart_info *info = port->info; + struct uart_state *state = port->state; /* * This means you called this function _after_ the port was * closed. No cookie for you. */ - BUG_ON(!info); - tasklet_schedule(&info->tlet); + BUG_ON(!state); + tasklet_schedule(&state->tlet); } static void uart_stop(struct tty_struct *tty) { struct uart_state *state = tty->driver_data; - struct uart_port *port = state->port; + struct uart_port *port = state->uart_port; unsigned long flags; spin_lock_irqsave(&port->lock, flags); @@ -94,9 +92,9 @@ static void uart_stop(struct tty_struct *tty) static void __uart_start(struct tty_struct *tty) { struct uart_state *state = tty->driver_data; - struct uart_port *port = state->port; + struct uart_port *port = state->uart_port; - if (!uart_circ_empty(&state->info.xmit) && state->info.xmit.buf && + if (!uart_circ_empty(&state->xmit) && state->xmit.buf && !tty->stopped && !tty->hw_stopped) port->ops->start_tx(port); } @@ -104,7 +102,7 @@ static void __uart_start(struct tty_struct *tty) static void uart_start(struct tty_struct *tty) { struct uart_state *state = tty->driver_data; - struct uart_port *port = state->port; + struct uart_port *port = state->uart_port; unsigned long flags; spin_lock_irqsave(&port->lock, flags); @@ -115,7 +113,7 @@ static void uart_start(struct tty_struct *tty) static void uart_tasklet_action(unsigned long data) { struct uart_state *state = (struct uart_state *)data; - tty_wakeup(state->info.port.tty); + tty_wakeup(state->port.tty); } static inline void @@ -141,12 +139,12 @@ uart_update_mctrl(struct uart_port *port, unsigned int set, unsigned int clear) */ static int uart_startup(struct uart_state *state, int init_hw) { - struct uart_info *info = &state->info; - struct uart_port *port = state->port; + struct uart_port *uport = state->uart_port; + struct tty_port *port = &state->port; unsigned long page; int retval = 0; - if (info->flags & UIF_INITIALIZED) + if (port->flags & ASYNC_INITIALIZED) return 0; /* @@ -154,26 +152,26 @@ static int uart_startup(struct uart_state *state, int init_hw) * once we have successfully opened the port. Also set * up the tty->alt_speed kludge */ - set_bit(TTY_IO_ERROR, &info->port.tty->flags); + set_bit(TTY_IO_ERROR, &port->tty->flags); - if (port->type == PORT_UNKNOWN) + if (uport->type == PORT_UNKNOWN) return 0; /* * Initialise and allocate the transmit and temporary * buffer. */ - if (!info->xmit.buf) { + if (!state->xmit.buf) { /* This is protected by the per port mutex */ page = get_zeroed_page(GFP_KERNEL); if (!page) return -ENOMEM; - info->xmit.buf = (unsigned char *) page; - uart_circ_clear(&info->xmit); + state->xmit.buf = (unsigned char *) page; + uart_circ_clear(&state->xmit); } - retval = port->ops->startup(port); + retval = uport->ops->startup(uport); if (retval == 0) { if (init_hw) { /* @@ -185,20 +183,20 @@ static int uart_startup(struct uart_state *state, int init_hw) * Setup the RTS and DTR signals once the * port is open and ready to respond. */ - if (info->port.tty->termios->c_cflag & CBAUD) - uart_set_mctrl(port, TIOCM_RTS | TIOCM_DTR); + if (port->tty->termios->c_cflag & CBAUD) + uart_set_mctrl(uport, TIOCM_RTS | TIOCM_DTR); } - if (info->flags & UIF_CTS_FLOW) { - spin_lock_irq(&port->lock); - if (!(port->ops->get_mctrl(port) & TIOCM_CTS)) - info->port.tty->hw_stopped = 1; - spin_unlock_irq(&port->lock); + if (port->flags & ASYNC_CTS_FLOW) { + spin_lock_irq(&uport->lock); + if (!(uport->ops->get_mctrl(uport) & TIOCM_CTS)) + port->tty->hw_stopped = 1; + spin_unlock_irq(&uport->lock); } - info->flags |= UIF_INITIALIZED; + set_bit(ASYNCB_INITIALIZED, &port->flags); - clear_bit(TTY_IO_ERROR, &info->port.tty->flags); + clear_bit(TTY_IO_ERROR, &port->tty->flags); } if (retval && capable(CAP_SYS_ADMIN)) @@ -214,9 +212,9 @@ static int uart_startup(struct uart_state *state, int init_hw) */ static void uart_shutdown(struct uart_state *state) { - struct uart_info *info = &state->info; - struct uart_port *port = state->port; - struct tty_struct *tty = info->port.tty; + struct uart_port *uport = state->uart_port; + struct tty_port *port = &state->port; + struct tty_struct *tty = port->tty; /* * Set the TTY IO error marker @@ -224,14 +222,12 @@ static void uart_shutdown(struct uart_state *state) if (tty) set_bit(TTY_IO_ERROR, &tty->flags); - if (info->flags & UIF_INITIALIZED) { - info->flags &= ~UIF_INITIALIZED; - + if (test_and_clear_bit(ASYNCB_INITIALIZED, &port->flags)) { /* * Turn off DTR and RTS early. */ if (!tty || (tty->termios->c_cflag & HUPCL)) - uart_clear_mctrl(port, TIOCM_DTR | TIOCM_RTS); + uart_clear_mctrl(uport, TIOCM_DTR | TIOCM_RTS); /* * clear delta_msr_wait queue to avoid mem leaks: we may free @@ -240,30 +236,30 @@ static void uart_shutdown(struct uart_state *state) * any outstanding file descriptors should be pointing at * hung_up_tty_fops now. */ - wake_up_interruptible(&info->delta_msr_wait); + wake_up_interruptible(&port->delta_msr_wait); /* * Free the IRQ and disable the port. */ - port->ops->shutdown(port); + uport->ops->shutdown(uport); /* * Ensure that the IRQ handler isn't running on another CPU. */ - synchronize_irq(port->irq); + synchronize_irq(uport->irq); } /* * kill off our tasklet */ - tasklet_kill(&info->tlet); + tasklet_kill(&state->tlet); /* * Free the transmit buffer page. */ - if (info->xmit.buf) { - free_page((unsigned long)info->xmit.buf); - info->xmit.buf = NULL; + if (state->xmit.buf) { + free_page((unsigned long)state->xmit.buf); + state->xmit.buf = NULL; } } @@ -430,15 +426,16 @@ EXPORT_SYMBOL(uart_get_divisor); static void uart_change_speed(struct uart_state *state, struct ktermios *old_termios) { - struct tty_struct *tty = state->info.port.tty; - struct uart_port *port = state->port; + struct tty_port *port = &state->port; + struct tty_struct *tty = port->tty; + struct uart_port *uport = state->uart_port; struct ktermios *termios; /* * If we have no tty, termios, or the port does not exist, * then we can't set the parameters for this port. */ - if (!tty || !tty->termios || port->type == PORT_UNKNOWN) + if (!tty || !tty->termios || uport->type == PORT_UNKNOWN) return; termios = tty->termios; @@ -447,16 +444,16 @@ uart_change_speed(struct uart_state *state, struct ktermios *old_termios) * Set flags based on termios cflag */ if (termios->c_cflag & CRTSCTS) - state->info.flags |= UIF_CTS_FLOW; + set_bit(ASYNCB_CTS_FLOW, &port->flags); else - state->info.flags &= ~UIF_CTS_FLOW; + clear_bit(ASYNCB_CTS_FLOW, &port->flags); if (termios->c_cflag & CLOCAL) - state->info.flags &= ~UIF_CHECK_CD; + clear_bit(ASYNCB_CHECK_CD, &port->flags); else - state->info.flags |= UIF_CHECK_CD; + set_bit(ASYNCB_CHECK_CD, &port->flags); - port->ops->set_termios(port, termios, old_termios); + uport->ops->set_termios(uport, termios, old_termios); } static inline int @@ -482,7 +479,7 @@ static int uart_put_char(struct tty_struct *tty, unsigned char ch) { struct uart_state *state = tty->driver_data; - return __uart_put_char(state->port, &state->info.xmit, ch); + return __uart_put_char(state->uart_port, &state->xmit, ch); } static void uart_flush_chars(struct tty_struct *tty) @@ -508,8 +505,8 @@ uart_write(struct tty_struct *tty, const unsigned char *buf, int count) return -EL3HLT; } - port = state->port; - circ = &state->info.xmit; + port = state->uart_port; + circ = &state->xmit; if (!circ->buf) return 0; @@ -539,9 +536,9 @@ static int uart_write_room(struct tty_struct *tty) unsigned long flags; int ret; - spin_lock_irqsave(&state->port->lock, flags); - ret = uart_circ_chars_free(&state->info.xmit); - spin_unlock_irqrestore(&state->port->lock, flags); + spin_lock_irqsave(&state->uart_port->lock, flags); + ret = uart_circ_chars_free(&state->xmit); + spin_unlock_irqrestore(&state->uart_port->lock, flags); return ret; } @@ -551,9 +548,9 @@ static int uart_chars_in_buffer(struct tty_struct *tty) unsigned long flags; int ret; - spin_lock_irqsave(&state->port->lock, flags); - ret = uart_circ_chars_pending(&state->info.xmit); - spin_unlock_irqrestore(&state->port->lock, flags); + spin_lock_irqsave(&state->uart_port->lock, flags); + ret = uart_circ_chars_pending(&state->xmit); + spin_unlock_irqrestore(&state->uart_port->lock, flags); return ret; } @@ -572,11 +569,11 @@ static void uart_flush_buffer(struct tty_struct *tty) return; } - port = state->port; + port = state->uart_port; pr_debug("uart_flush_buffer(%d) called\n", tty->index); spin_lock_irqsave(&port->lock, flags); - uart_circ_clear(&state->info.xmit); + uart_circ_clear(&state->xmit); if (port->ops->flush_buffer) port->ops->flush_buffer(port); spin_unlock_irqrestore(&port->lock, flags); @@ -590,7 +587,7 @@ static void uart_flush_buffer(struct tty_struct *tty) static void uart_send_xchar(struct tty_struct *tty, char ch) { struct uart_state *state = tty->driver_data; - struct uart_port *port = state->port; + struct uart_port *port = state->uart_port; unsigned long flags; if (port->ops->send_xchar) @@ -613,13 +610,13 @@ static void uart_throttle(struct tty_struct *tty) uart_send_xchar(tty, STOP_CHAR(tty)); if (tty->termios->c_cflag & CRTSCTS) - uart_clear_mctrl(state->port, TIOCM_RTS); + uart_clear_mctrl(state->uart_port, TIOCM_RTS); } static void uart_unthrottle(struct tty_struct *tty) { struct uart_state *state = tty->driver_data; - struct uart_port *port = state->port; + struct uart_port *port = state->uart_port; if (I_IXOFF(tty)) { if (port->x_char) @@ -635,35 +632,36 @@ static void uart_unthrottle(struct tty_struct *tty) static int uart_get_info(struct uart_state *state, struct serial_struct __user *retinfo) { - struct uart_port *port = state->port; + struct uart_port *uport = state->uart_port; + struct tty_port *port = &state->port; struct serial_struct tmp; memset(&tmp, 0, sizeof(tmp)); /* Ensure the state we copy is consistent and no hardware changes occur as we go */ - mutex_lock(&state->mutex); + mutex_lock(&port->mutex); - tmp.type = port->type; - tmp.line = port->line; - tmp.port = port->iobase; + tmp.type = uport->type; + tmp.line = uport->line; + tmp.port = uport->iobase; if (HIGH_BITS_OFFSET) - tmp.port_high = (long) port->iobase >> HIGH_BITS_OFFSET; - tmp.irq = port->irq; - tmp.flags = port->flags; - tmp.xmit_fifo_size = port->fifosize; - tmp.baud_base = port->uartclk / 16; - tmp.close_delay = state->close_delay / 10; - tmp.closing_wait = state->closing_wait == USF_CLOSING_WAIT_NONE ? + tmp.port_high = (long) uport->iobase >> HIGH_BITS_OFFSET; + tmp.irq = uport->irq; + tmp.flags = uport->flags; + tmp.xmit_fifo_size = uport->fifosize; + tmp.baud_base = uport->uartclk / 16; + tmp.close_delay = port->close_delay / 10; + tmp.closing_wait = port->closing_wait == ASYNC_CLOSING_WAIT_NONE ? ASYNC_CLOSING_WAIT_NONE : - state->closing_wait / 10; - tmp.custom_divisor = port->custom_divisor; - tmp.hub6 = port->hub6; - tmp.io_type = port->iotype; - tmp.iomem_reg_shift = port->regshift; - tmp.iomem_base = (void *)(unsigned long)port->mapbase; + port->closing_wait / 10; + tmp.custom_divisor = uport->custom_divisor; + tmp.hub6 = uport->hub6; + tmp.io_type = uport->iotype; + tmp.iomem_reg_shift = uport->regshift; + tmp.iomem_base = (void *)(unsigned long)uport->mapbase; - mutex_unlock(&state->mutex); + mutex_unlock(&port->mutex); if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) return -EFAULT; @@ -674,7 +672,8 @@ static int uart_set_info(struct uart_state *state, struct serial_struct __user *newinfo) { struct serial_struct new_serial; - struct uart_port *port = state->port; + struct uart_port *uport = state->uart_port; + struct tty_port *port = &state->port; unsigned long new_port; unsigned int change_irq, change_port, closing_wait; unsigned int old_custom_divisor, close_delay; @@ -691,58 +690,58 @@ static int uart_set_info(struct uart_state *state, new_serial.irq = irq_canonicalize(new_serial.irq); close_delay = new_serial.close_delay * 10; closing_wait = new_serial.closing_wait == ASYNC_CLOSING_WAIT_NONE ? - USF_CLOSING_WAIT_NONE : new_serial.closing_wait * 10; + ASYNC_CLOSING_WAIT_NONE : new_serial.closing_wait * 10; /* - * This semaphore protects state->count. It is also + * This semaphore protects port->count. It is also * very useful to prevent opens. Also, take the * port configuration semaphore to make sure that a * module insertion/removal doesn't change anything * under us. */ - mutex_lock(&state->mutex); + mutex_lock(&port->mutex); - change_irq = !(port->flags & UPF_FIXED_PORT) - && new_serial.irq != port->irq; + change_irq = !(uport->flags & UPF_FIXED_PORT) + && new_serial.irq != uport->irq; /* * Since changing the 'type' of the port changes its resource * allocations, we should treat type changes the same as * IO port changes. */ - change_port = !(port->flags & UPF_FIXED_PORT) - && (new_port != port->iobase || - (unsigned long)new_serial.iomem_base != port->mapbase || - new_serial.hub6 != port->hub6 || - new_serial.io_type != port->iotype || - new_serial.iomem_reg_shift != port->regshift || - new_serial.type != port->type); - - old_flags = port->flags; + change_port = !(uport->flags & UPF_FIXED_PORT) + && (new_port != uport->iobase || + (unsigned long)new_serial.iomem_base != uport->mapbase || + new_serial.hub6 != uport->hub6 || + new_serial.io_type != uport->iotype || + new_serial.iomem_reg_shift != uport->regshift || + new_serial.type != uport->type); + + old_flags = uport->flags; new_flags = new_serial.flags; - old_custom_divisor = port->custom_divisor; + old_custom_divisor = uport->custom_divisor; if (!capable(CAP_SYS_ADMIN)) { retval = -EPERM; if (change_irq || change_port || - (new_serial.baud_base != port->uartclk / 16) || - (close_delay != state->close_delay) || - (closing_wait != state->closing_wait) || + (new_serial.baud_base != uport->uartclk / 16) || + (close_delay != port->close_delay) || + (closing_wait != port->closing_wait) || (new_serial.xmit_fifo_size && - new_serial.xmit_fifo_size != port->fifosize) || + new_serial.xmit_fifo_size != uport->fifosize) || (((new_flags ^ old_flags) & ~UPF_USR_MASK) != 0)) goto exit; - port->flags = ((port->flags & ~UPF_USR_MASK) | + uport->flags = ((uport->flags & ~UPF_USR_MASK) | (new_flags & UPF_USR_MASK)); - port->custom_divisor = new_serial.custom_divisor; + uport->custom_divisor = new_serial.custom_divisor; goto check_and_exit; } /* * Ask the low level driver to verify the settings. */ - if (port->ops->verify_port) - retval = port->ops->verify_port(port, &new_serial); + if (uport->ops->verify_port) + retval = uport->ops->verify_port(uport, &new_serial); if ((new_serial.irq >= nr_irqs) || (new_serial.irq < 0) || (new_serial.baud_base < 9600)) @@ -757,7 +756,7 @@ static int uart_set_info(struct uart_state *state, /* * Make sure that we are the sole user of this port. */ - if (uart_users(state) > 1) + if (tty_port_users(port) > 1) goto exit; /* @@ -771,31 +770,31 @@ static int uart_set_info(struct uart_state *state, unsigned long old_iobase, old_mapbase; unsigned int old_type, old_iotype, old_hub6, old_shift; - old_iobase = port->iobase; - old_mapbase = port->mapbase; - old_type = port->type; - old_hub6 = port->hub6; - old_iotype = port->iotype; - old_shift = port->regshift; + old_iobase = uport->iobase; + old_mapbase = uport->mapbase; + old_type = uport->type; + old_hub6 = uport->hub6; + old_iotype = uport->iotype; + old_shift = uport->regshift; /* * Free and release old regions */ if (old_type != PORT_UNKNOWN) - port->ops->release_port(port); + uport->ops->release_port(uport); - port->iobase = new_port; - port->type = new_serial.type; - port->hub6 = new_serial.hub6; - port->iotype = new_serial.io_type; - port->regshift = new_serial.iomem_reg_shift; - port->mapbase = (unsigned long)new_serial.iomem_base; + uport->iobase = new_port; + uport->type = new_serial.type; + uport->hub6 = new_serial.hub6; + uport->iotype = new_serial.io_type; + uport->regshift = new_serial.iomem_reg_shift; + uport->mapbase = (unsigned long)new_serial.iomem_base; /* * Claim and map the new regions */ - if (port->type != PORT_UNKNOWN) { - retval = port->ops->request_port(port); + if (uport->type != PORT_UNKNOWN) { + retval = uport->ops->request_port(uport); } else { /* Always success - Jean II */ retval = 0; @@ -806,19 +805,19 @@ static int uart_set_info(struct uart_state *state, * new port, try to restore the old settings. */ if (retval && old_type != PORT_UNKNOWN) { - port->iobase = old_iobase; - port->type = old_type; - port->hub6 = old_hub6; - port->iotype = old_iotype; - port->regshift = old_shift; - port->mapbase = old_mapbase; - retval = port->ops->request_port(port); + uport->iobase = old_iobase; + uport->type = old_type; + uport->hub6 = old_hub6; + uport->iotype = old_iotype; + uport->regshift = old_shift; + uport->mapbase = old_mapbase; + retval = uport->ops->request_port(uport); /* * If we failed to restore the old settings, * we fail like this. */ if (retval) - port->type = PORT_UNKNOWN; + uport->type = PORT_UNKNOWN; /* * We failed anyway. @@ -830,45 +829,45 @@ static int uart_set_info(struct uart_state *state, } if (change_irq) - port->irq = new_serial.irq; - if (!(port->flags & UPF_FIXED_PORT)) - port->uartclk = new_serial.baud_base * 16; - port->flags = (port->flags & ~UPF_CHANGE_MASK) | + uport->irq = new_serial.irq; + if (!(uport->flags & UPF_FIXED_PORT)) + uport->uartclk = new_serial.baud_base * 16; + uport->flags = (uport->flags & ~UPF_CHANGE_MASK) | (new_flags & UPF_CHANGE_MASK); - port->custom_divisor = new_serial.custom_divisor; - state->close_delay = close_delay; - state->closing_wait = closing_wait; + uport->custom_divisor = new_serial.custom_divisor; + port->close_delay = close_delay; + port->closing_wait = closing_wait; if (new_serial.xmit_fifo_size) - port->fifosize = new_serial.xmit_fifo_size; - if (state->info.port.tty) - state->info.port.tty->low_latency = - (port->flags & UPF_LOW_LATENCY) ? 1 : 0; + uport->fifosize = new_serial.xmit_fifo_size; + if (port->tty) + port->tty->low_latency = + (uport->flags & UPF_LOW_LATENCY) ? 1 : 0; check_and_exit: retval = 0; - if (port->type == PORT_UNKNOWN) + if (uport->type == PORT_UNKNOWN) goto exit; - if (state->info.flags & UIF_INITIALIZED) { - if (((old_flags ^ port->flags) & UPF_SPD_MASK) || - old_custom_divisor != port->custom_divisor) { + if (port->flags & ASYNC_INITIALIZED) { + if (((old_flags ^ uport->flags) & UPF_SPD_MASK) || + old_custom_divisor != uport->custom_divisor) { /* * If they're setting up a custom divisor or speed, * instead of clearing it, then bitch about it. No * need to rate-limit; it's CAP_SYS_ADMIN only. */ - if (port->flags & UPF_SPD_MASK) { + if (uport->flags & UPF_SPD_MASK) { char buf[64]; printk(KERN_NOTICE "%s sets custom speed on %s. This " "is deprecated.\n", current->comm, - tty_name(state->info.port.tty, buf)); + tty_name(port->tty, buf)); } uart_change_speed(state, NULL); } } else retval = uart_startup(state, 1); exit: - mutex_unlock(&state->mutex); + mutex_unlock(&port->mutex); return retval; } @@ -880,10 +879,11 @@ static int uart_set_info(struct uart_state *state, static int uart_get_lsr_info(struct uart_state *state, unsigned int __user *value) { - struct uart_port *port = state->port; + struct uart_port *uport = state->uart_port; + struct tty_port *port = &state->port; unsigned int result; - result = port->ops->tx_empty(port); + result = uport->ops->tx_empty(uport); /* * If we're about to load something into the transmit @@ -891,9 +891,9 @@ static int uart_get_lsr_info(struct uart_state *state, * avoid a race condition (depending on when the transmit * interrupt happens). */ - if (port->x_char || - ((uart_circ_chars_pending(&state->info.xmit) > 0) && - !state->info.port.tty->stopped && !state->info.port.tty->hw_stopped)) + if (uport->x_char || + ((uart_circ_chars_pending(&state->xmit) > 0) && + !port->tty->stopped && !port->tty->hw_stopped)) result &= ~TIOCSER_TEMT; return put_user(result, value); @@ -902,19 +902,20 @@ static int uart_get_lsr_info(struct uart_state *state, static int uart_tiocmget(struct tty_struct *tty, struct file *file) { struct uart_state *state = tty->driver_data; - struct uart_port *port = state->port; + struct tty_port *port = &state->port; + struct uart_port *uport = state->uart_port; int result = -EIO; - mutex_lock(&state->mutex); + mutex_lock(&port->mutex); if ((!file || !tty_hung_up_p(file)) && !(tty->flags & (1 << TTY_IO_ERROR))) { - result = port->mctrl; + result = uport->mctrl; - spin_lock_irq(&port->lock); - result |= port->ops->get_mctrl(port); - spin_unlock_irq(&port->lock); + spin_lock_irq(&uport->lock); + result |= uport->ops->get_mctrl(uport); + spin_unlock_irq(&uport->lock); } - mutex_unlock(&state->mutex); + mutex_unlock(&port->mutex); return result; } @@ -924,36 +925,39 @@ uart_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { struct uart_state *state = tty->driver_data; - struct uart_port *port = state->port; + struct uart_port *uport = state->uart_port; + struct tty_port *port = &state->port; int ret = -EIO; - mutex_lock(&state->mutex); + mutex_lock(&port->mutex); if ((!file || !tty_hung_up_p(file)) && !(tty->flags & (1 << TTY_IO_ERROR))) { - uart_update_mctrl(port, set, clear); + uart_update_mctrl(uport, set, clear); ret = 0; } - mutex_unlock(&state->mutex); + mutex_unlock(&port->mutex); return ret; } static int uart_break_ctl(struct tty_struct *tty, int break_state) { struct uart_state *state = tty->driver_data; - struct uart_port *port = state->port; + struct tty_port *port = &state->port; + struct uart_port *uport = state->uart_port; - mutex_lock(&state->mutex); + mutex_lock(&port->mutex); - if (port->type != PORT_UNKNOWN) - port->ops->break_ctl(port, break_state); + if (uport->type != PORT_UNKNOWN) + uport->ops->break_ctl(uport, break_state); - mutex_unlock(&state->mutex); + mutex_unlock(&port->mutex); return 0; } static int uart_do_autoconfig(struct uart_state *state) { - struct uart_port *port = state->port; + struct uart_port *uport = state->uart_port; + struct tty_port *port = &state->port; int flags, ret; if (!capable(CAP_SYS_ADMIN)) @@ -964,33 +968,33 @@ static int uart_do_autoconfig(struct uart_state *state) * changing, and hence any extra opens of the port while * we're auto-configuring. */ - if (mutex_lock_interruptible(&state->mutex)) + if (mutex_lock_interruptible(&port->mutex)) return -ERESTARTSYS; ret = -EBUSY; - if (uart_users(state) == 1) { + if (tty_port_users(port) == 1) { uart_shutdown(state); /* * If we already have a port type configured, * we must release its resources. */ - if (port->type != PORT_UNKNOWN) - port->ops->release_port(port); + if (uport->type != PORT_UNKNOWN) + uport->ops->release_port(uport); flags = UART_CONFIG_TYPE; - if (port->flags & UPF_AUTO_IRQ) + if (uport->flags & UPF_AUTO_IRQ) flags |= UART_CONFIG_IRQ; /* * This will claim the ports resources if * a port is found. */ - port->ops->config_port(port, flags); + uport->ops->config_port(uport, flags); ret = uart_startup(state, 1); } - mutex_unlock(&state->mutex); + mutex_unlock(&port->mutex); return ret; } @@ -999,11 +1003,15 @@ static int uart_do_autoconfig(struct uart_state *state) * - mask passed in arg for lines of interest * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking) * Caller should use TIOCGICOUNT to see which one it was + * + * FIXME: This wants extracting into a common all driver implementation + * of TIOCMWAIT using tty_port. */ static int uart_wait_modem_status(struct uart_state *state, unsigned long arg) { - struct uart_port *port = state->port; + struct uart_port *uport = state->uart_port; + struct tty_port *port = &state->port; DECLARE_WAITQUEUE(wait, current); struct uart_icount cprev, cnow; int ret; @@ -1011,20 +1019,20 @@ uart_wait_modem_status(struct uart_state *state, unsigned long arg) /* * note the counters on entry */ - spin_lock_irq(&port->lock); - memcpy(&cprev, &port->icount, sizeof(struct uart_icount)); + spin_lock_irq(&uport->lock); + memcpy(&cprev, &uport->icount, sizeof(struct uart_icount)); /* * Force modem status interrupts on */ - port->ops->enable_ms(port); - spin_unlock_irq(&port->lock); + uport->ops->enable_ms(uport); + spin_unlock_irq(&uport->lock); - add_wait_queue(&state->info.delta_msr_wait, &wait); + add_wait_queue(&port->delta_msr_wait, &wait); for (;;) { - spin_lock_irq(&port->lock); - memcpy(&cnow, &port->icount, sizeof(struct uart_icount)); - spin_unlock_irq(&port->lock); + spin_lock_irq(&uport->lock); + memcpy(&cnow, &uport->icount, sizeof(struct uart_icount)); + spin_unlock_irq(&uport->lock); set_current_state(TASK_INTERRUPTIBLE); @@ -1048,7 +1056,7 @@ uart_wait_modem_status(struct uart_state *state, unsigned long arg) } current->state = TASK_RUNNING; - remove_wait_queue(&state->info.delta_msr_wait, &wait); + remove_wait_queue(&port->delta_msr_wait, &wait); return ret; } @@ -1064,11 +1072,11 @@ static int uart_get_count(struct uart_state *state, { struct serial_icounter_struct icount; struct uart_icount cnow; - struct uart_port *port = state->port; + struct uart_port *uport = state->uart_port; - spin_lock_irq(&port->lock); - memcpy(&cnow, &port->icount, sizeof(struct uart_icount)); - spin_unlock_irq(&port->lock); + spin_lock_irq(&uport->lock); + memcpy(&cnow, &uport->icount, sizeof(struct uart_icount)); + spin_unlock_irq(&uport->lock); icount.cts = cnow.cts; icount.dsr = cnow.dsr; @@ -1093,6 +1101,7 @@ uart_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd, unsigned long arg) { struct uart_state *state = tty->driver_data; + struct tty_port *port = &state->port; void __user *uarg = (void __user *)arg; int ret = -ENOIOCTLCMD; @@ -1143,7 +1152,7 @@ uart_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd, if (ret != -ENOIOCTLCMD) goto out; - mutex_lock(&state->mutex); + mutex_lock(&port->mutex); if (tty_hung_up_p(filp)) { ret = -EIO; @@ -1160,14 +1169,14 @@ uart_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd, break; default: { - struct uart_port *port = state->port; - if (port->ops->ioctl) - ret = port->ops->ioctl(port, cmd, arg); + struct uart_port *uport = state->uart_port; + if (uport->ops->ioctl) + ret = uport->ops->ioctl(uport, cmd, arg); break; } } out_up: - mutex_unlock(&state->mutex); + mutex_unlock(&port->mutex); out: return ret; } @@ -1175,10 +1184,10 @@ out: static void uart_set_ldisc(struct tty_struct *tty) { struct uart_state *state = tty->driver_data; - struct uart_port *port = state->port; + struct uart_port *uport = state->uart_port; - if (port->ops->set_ldisc) - port->ops->set_ldisc(port); + if (uport->ops->set_ldisc) + uport->ops->set_ldisc(uport); } static void uart_set_termios(struct tty_struct *tty, @@ -1207,7 +1216,7 @@ static void uart_set_termios(struct tty_struct *tty, /* Handle transition to B0 status */ if ((old_termios->c_cflag & CBAUD) && !(cflag & CBAUD)) - uart_clear_mctrl(state->port, TIOCM_RTS | TIOCM_DTR); + uart_clear_mctrl(state->uart_port, TIOCM_RTS | TIOCM_DTR); /* Handle transition away from B0 status */ if (!(old_termios->c_cflag & CBAUD) && (cflag & CBAUD)) { @@ -1215,25 +1224,25 @@ static void uart_set_termios(struct tty_struct *tty, if (!(cflag & CRTSCTS) || !test_bit(TTY_THROTTLED, &tty->flags)) mask |= TIOCM_RTS; - uart_set_mctrl(state->port, mask); + uart_set_mctrl(state->uart_port, mask); } /* Handle turning off CRTSCTS */ if ((old_termios->c_cflag & CRTSCTS) && !(cflag & CRTSCTS)) { - spin_lock_irqsave(&state->port->lock, flags); + spin_lock_irqsave(&state->uart_port->lock, flags); tty->hw_stopped = 0; __uart_start(tty); - spin_unlock_irqrestore(&state->port->lock, flags); + spin_unlock_irqrestore(&state->uart_port->lock, flags); } /* Handle turning on CRTSCTS */ if (!(old_termios->c_cflag & CRTSCTS) && (cflag & CRTSCTS)) { - spin_lock_irqsave(&state->port->lock, flags); - if (!(state->port->ops->get_mctrl(state->port) & TIOCM_CTS)) { + spin_lock_irqsave(&state->uart_port->lock, flags); + if (!(state->uart_port->ops->get_mctrl(state->uart_port) & TIOCM_CTS)) { tty->hw_stopped = 1; - state->port->ops->stop_tx(state->port); + state->uart_port->ops->stop_tx(state->uart_port); } - spin_unlock_irqrestore(&state->port->lock, flags); + spin_unlock_irqrestore(&state->uart_port->lock, flags); } #if 0 /* @@ -1244,7 +1253,7 @@ static void uart_set_termios(struct tty_struct *tty, */ if (!(old_termios->c_cflag & CLOCAL) && (tty->termios->c_cflag & CLOCAL)) - wake_up_interruptible(&info->port.open_wait); + wake_up_interruptible(&state->uart_port.open_wait); #endif } @@ -1256,40 +1265,39 @@ static void uart_set_termios(struct tty_struct *tty, static void uart_close(struct tty_struct *tty, struct file *filp) { struct uart_state *state = tty->driver_data; - struct uart_port *port; + struct tty_port *port; + struct uart_port *uport; BUG_ON(!kernel_locked()); - if (!state || !state->port) - return; + uport = state->uart_port; + port = &state->port; - port = state->port; + pr_debug("uart_close(%d) called\n", uport->line); - pr_debug("uart_close(%d) called\n", port->line); - - mutex_lock(&state->mutex); + mutex_lock(&port->mutex); if (tty_hung_up_p(filp)) goto done; - if ((tty->count == 1) && (state->count != 1)) { + if ((tty->count == 1) && (port->count != 1)) { /* * Uh, oh. tty->count is 1, which means that the tty - * structure will be freed. state->count should always + * structure will be freed. port->count should always * be one in these conditions. If it's greater than * one, we've got real problems, since it means the * serial port won't be shutdown. */ printk(KERN_ERR "uart_close: bad serial port count; tty->count is 1, " - "state->count is %d\n", state->count); - state->count = 1; + "port->count is %d\n", port->count); + port->count = 1; } - if (--state->count < 0) { + if (--port->count < 0) { printk(KERN_ERR "uart_close: bad serial port count for %s: %d\n", - tty->name, state->count); - state->count = 0; + tty->name, port->count); + port->count = 0; } - if (state->count) + if (port->count) goto done; /* @@ -1299,24 +1307,24 @@ static void uart_close(struct tty_struct *tty, struct file *filp) */ tty->closing = 1; - if (state->closing_wait != USF_CLOSING_WAIT_NONE) - tty_wait_until_sent(tty, msecs_to_jiffies(state->closing_wait)); + if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE) + tty_wait_until_sent(tty, msecs_to_jiffies(port->closing_wait)); /* * At this point, we stop accepting input. To do this, we * disable the receive line status interrupts. */ - if (state->info.flags & UIF_INITIALIZED) { + if (port->flags & ASYNC_INITIALIZED) { unsigned long flags; spin_lock_irqsave(&port->lock, flags); - port->ops->stop_rx(port); + uport->ops->stop_rx(uport); spin_unlock_irqrestore(&port->lock, flags); /* * Before we drop DTR, make sure the UART transmitter * has completely drained; this is especially * important if there is a transmit FIFO! */ - uart_wait_until_sent(tty, port->timeout); + uart_wait_until_sent(tty, uport->timeout); } uart_shutdown(state); @@ -1325,29 +1333,29 @@ static void uart_close(struct tty_struct *tty, struct file *filp) tty_ldisc_flush(tty); tty->closing = 0; - state->info.port.tty = NULL; + tty_port_tty_set(port, NULL); - if (state->info.port.blocked_open) { - if (state->close_delay) - msleep_interruptible(state->close_delay); - } else if (!uart_console(port)) { + if (port->blocked_open) { + if (port->close_delay) + msleep_interruptible(port->close_delay); + } else if (!uart_console(uport)) { uart_change_pm(state, 3); } /* * Wake up anyone trying to open this port. */ - state->info.flags &= ~UIF_NORMAL_ACTIVE; - wake_up_interruptible(&state->info.port.open_wait); + clear_bit(ASYNCB_NORMAL_ACTIVE, &port->flags); + wake_up_interruptible(&port->open_wait); - done: - mutex_unlock(&state->mutex); +done: + mutex_unlock(&port->mutex); } static void uart_wait_until_sent(struct tty_struct *tty, int timeout) { struct uart_state *state = tty->driver_data; - struct uart_port *port = state->port; + struct uart_port *port = state->uart_port; unsigned long char_time, expire; if (port->type == PORT_UNKNOWN || port->fifosize == 0) @@ -1412,22 +1420,22 @@ static void uart_wait_until_sent(struct tty_struct *tty, int timeout) static void uart_hangup(struct tty_struct *tty) { struct uart_state *state = tty->driver_data; - struct uart_info *info = &state->info; + struct tty_port *port = &state->port; BUG_ON(!kernel_locked()); - pr_debug("uart_hangup(%d)\n", state->port->line); + pr_debug("uart_hangup(%d)\n", state->uart_port->line); - mutex_lock(&state->mutex); - if (info->flags & UIF_NORMAL_ACTIVE) { + mutex_lock(&port->mutex); + if (port->flags & ASYNC_NORMAL_ACTIVE) { uart_flush_buffer(tty); uart_shutdown(state); - state->count = 0; - info->flags &= ~UIF_NORMAL_ACTIVE; - info->port.tty = NULL; - wake_up_interruptible(&info->port.open_wait); - wake_up_interruptible(&info->delta_msr_wait); + port->count = 0; + clear_bit(ASYNCB_NORMAL_ACTIVE, &port->flags); + tty_port_tty_set(port, NULL); + wake_up_interruptible(&port->open_wait); + wake_up_interruptible(&port->delta_msr_wait); } - mutex_unlock(&state->mutex); + mutex_unlock(&port->mutex); } /* @@ -1438,8 +1446,8 @@ static void uart_hangup(struct tty_struct *tty) */ static void uart_update_termios(struct uart_state *state) { - struct tty_struct *tty = state->info.port.tty; - struct uart_port *port = state->port; + struct tty_struct *tty = state->port.tty; + struct uart_port *port = state->uart_port; if (uart_console(port) && port->cons->cflag) { tty->termios->c_cflag = port->cons->cflag; @@ -1473,27 +1481,27 @@ static int uart_block_til_ready(struct file *filp, struct uart_state *state) { DECLARE_WAITQUEUE(wait, current); - struct uart_info *info = &state->info; - struct uart_port *port = state->port; + struct uart_port *uport = state->uart_port; + struct tty_port *port = &state->port; unsigned int mctrl; - info->port.blocked_open++; - state->count--; + port->blocked_open++; + port->count--; - add_wait_queue(&info->port.open_wait, &wait); + add_wait_queue(&port->open_wait, &wait); while (1) { set_current_state(TASK_INTERRUPTIBLE); /* * If we have been hung up, tell userspace/restart open. */ - if (tty_hung_up_p(filp) || info->port.tty == NULL) + if (tty_hung_up_p(filp) || port->tty == NULL) break; /* * If the port has been closed, tell userspace/restart open. */ - if (!(info->flags & UIF_INITIALIZED)) + if (!(port->flags & ASYNC_INITIALIZED)) break; /* @@ -1506,8 +1514,8 @@ uart_block_til_ready(struct file *filp, struct uart_state *state) * have set TTY_IO_ERROR for a non-existant port. */ if ((filp->f_flags & O_NONBLOCK) || - (info->port.tty->termios->c_cflag & CLOCAL) || - (info->port.tty->flags & (1 << TTY_IO_ERROR))) + (port->tty->termios->c_cflag & CLOCAL) || + (port->tty->flags & (1 << TTY_IO_ERROR))) break; /* @@ -1515,37 +1523,37 @@ uart_block_til_ready(struct file *filp, struct uart_state *state) * not set RTS here - we want to make sure we catch * the data from the modem. */ - if (info->port.tty->termios->c_cflag & CBAUD) - uart_set_mctrl(port, TIOCM_DTR); + if (port->tty->termios->c_cflag & CBAUD) + uart_set_mctrl(uport, TIOCM_DTR); /* * and wait for the carrier to indicate that the * modem is ready for us. */ - spin_lock_irq(&port->lock); - port->ops->enable_ms(port); - mctrl = port->ops->get_mctrl(port); - spin_unlock_irq(&port->lock); + spin_lock_irq(&uport->lock); + uport->ops->enable_ms(uport); + mctrl = uport->ops->get_mctrl(uport); + spin_unlock_irq(&uport->lock); if (mctrl & TIOCM_CAR) break; - mutex_unlock(&state->mutex); + mutex_unlock(&port->mutex); schedule(); - mutex_lock(&state->mutex); + mutex_lock(&port->mutex); if (signal_pending(current)) break; } set_current_state(TASK_RUNNING); - remove_wait_queue(&info->port.open_wait, &wait); + remove_wait_queue(&port->open_wait, &wait); - state->count++; - info->port.blocked_open--; + port->count++; + port->blocked_open--; if (signal_pending(current)) return -ERESTARTSYS; - if (!info->port.tty || tty_hung_up_p(filp)) + if (!port->tty || tty_hung_up_p(filp)) return -EAGAIN; return 0; @@ -1554,24 +1562,26 @@ uart_block_til_ready(struct file *filp, struct uart_state *state) static struct uart_state *uart_get(struct uart_driver *drv, int line) { struct uart_state *state; + struct tty_port *port; int ret = 0; state = drv->state + line; - if (mutex_lock_interruptible(&state->mutex)) { + port = &state->port; + if (mutex_lock_interruptible(&port->mutex)) { ret = -ERESTARTSYS; goto err; } - state->count++; - if (!state->port || state->port->flags & UPF_DEAD) { + port->count++; + if (!state->uart_port || state->uart_port->flags & UPF_DEAD) { ret = -ENXIO; goto err_unlock; } return state; err_unlock: - state->count--; - mutex_unlock(&state->mutex); + port->count--; + mutex_unlock(&port->mutex); err: return ERR_PTR(ret); } @@ -1590,6 +1600,7 @@ static int uart_open(struct tty_struct *tty, struct file *filp) { struct uart_driver *drv = (struct uart_driver *)tty->driver->driver_state; struct uart_state *state; + struct tty_port *port; int retval, line = tty->index; BUG_ON(!kernel_locked()); @@ -1606,16 +1617,18 @@ static int uart_open(struct tty_struct *tty, struct file *filp) /* * We take the semaphore inside uart_get to guarantee that we won't - * be re-entered while allocating the info structure, or while we + * be re-entered while allocating the state structure, or while we * request any IRQs that the driver may need. This also has the nice * side-effect that it delays the action of uart_hangup, so we can - * guarantee that info->port.tty will always contain something reasonable. + * guarantee that state->port.tty will always contain something + * reasonable. */ state = uart_get(drv, line); if (IS_ERR(state)) { retval = PTR_ERR(state); goto fail; } + port = &state->port; /* * Once we set tty->driver_data here, we are guaranteed that @@ -1623,25 +1636,25 @@ static int uart_open(struct tty_struct *tty, struct file *filp) * Any failures from here onwards should not touch the count. */ tty->driver_data = state; - state->port->info = &state->info; - tty->low_latency = (state->port->flags & UPF_LOW_LATENCY) ? 1 : 0; + state->uart_port->state = state; + tty->low_latency = (state->uart_port->flags & UPF_LOW_LATENCY) ? 1 : 0; tty->alt_speed = 0; - state->info.port.tty = tty; + tty_port_tty_set(port, tty); /* * If the port is in the middle of closing, bail out now. */ if (tty_hung_up_p(filp)) { retval = -EAGAIN; - state->count--; - mutex_unlock(&state->mutex); + port->count--; + mutex_unlock(&port->mutex); goto fail; } /* * Make sure the device is in D0 state. */ - if (state->count == 1) + if (port->count == 1) uart_change_pm(state, 0); /* @@ -1654,18 +1667,18 @@ static int uart_open(struct tty_struct *tty, struct file *filp) */ if (retval == 0) retval = uart_block_til_ready(filp, state); - mutex_unlock(&state->mutex); + mutex_unlock(&port->mutex); /* * If this is the first open to succeed, adjust things to suit. */ - if (retval == 0 && !(state->info.flags & UIF_NORMAL_ACTIVE)) { - state->info.flags |= UIF_NORMAL_ACTIVE; + if (retval == 0 && !(port->flags & ASYNC_NORMAL_ACTIVE)) { + set_bit(ASYNCB_NORMAL_ACTIVE, &port->flags); uart_update_termios(state); } - fail: +fail: return retval; } @@ -1687,57 +1700,58 @@ static const char *uart_type(struct uart_port *port) static void uart_line_info(struct seq_file *m, struct uart_driver *drv, int i) { struct uart_state *state = drv->state + i; + struct tty_port *port = &state->port; int pm_state; - struct uart_port *port = state->port; + struct uart_port *uport = state->uart_port; char stat_buf[32]; unsigned int status; int mmio; - if (!port) + if (!uport) return; - mmio = port->iotype >= UPIO_MEM; + mmio = uport->iotype >= UPIO_MEM; seq_printf(m, "%d: uart:%s %s%08llX irq:%d", - port->line, uart_type(port), + uport->line, uart_type(uport), mmio ? "mmio:0x" : "port:", - mmio ? (unsigned long long)port->mapbase - : (unsigned long long) port->iobase, - port->irq); + mmio ? (unsigned long long)uport->mapbase + : (unsigned long long)uport->iobase, + uport->irq); - if (port->type == PORT_UNKNOWN) { + if (uport->type == PORT_UNKNOWN) { seq_putc(m, '\n'); return; } if (capable(CAP_SYS_ADMIN)) { - mutex_lock(&state->mutex); + mutex_lock(&port->mutex); pm_state = state->pm_state; if (pm_state) uart_change_pm(state, 0); - spin_lock_irq(&port->lock); - status = port->ops->get_mctrl(port); - spin_unlock_irq(&port->lock); + spin_lock_irq(&uport->lock); + status = uport->ops->get_mctrl(uport); + spin_unlock_irq(&uport->lock); if (pm_state) uart_change_pm(state, pm_state); - mutex_unlock(&state->mutex); + mutex_unlock(&port->mutex); seq_printf(m, " tx:%d rx:%d", - port->icount.tx, port->icount.rx); - if (port->icount.frame) + uport->icount.tx, uport->icount.rx); + if (uport->icount.frame) seq_printf(m, " fe:%d", - port->icount.frame); - if (port->icount.parity) + uport->icount.frame); + if (uport->icount.parity) seq_printf(m, " pe:%d", - port->icount.parity); - if (port->icount.brk) + uport->icount.parity); + if (uport->icount.brk) seq_printf(m, " brk:%d", - port->icount.brk); - if (port->icount.overrun) + uport->icount.brk); + if (uport->icount.overrun) seq_printf(m, " oe:%d", - port->icount.overrun); + uport->icount.overrun); #define INFOBIT(bit, str) \ - if (port->mctrl & (bit)) \ + if (uport->mctrl & (bit)) \ strncat(stat_buf, (str), sizeof(stat_buf) - \ strlen(stat_buf) - 2) #define STATBIT(bit, str) \ @@ -1958,7 +1972,7 @@ EXPORT_SYMBOL_GPL(uart_set_options); static void uart_change_pm(struct uart_state *state, int pm_state) { - struct uart_port *port = state->port; + struct uart_port *port = state->uart_port; if (state->pm_state != pm_state) { if (port->ops->pm) @@ -1982,132 +1996,138 @@ static int serial_match_port(struct device *dev, void *data) return dev->devt == devt; /* Actually, only one tty per port */ } -int uart_suspend_port(struct uart_driver *drv, struct uart_port *port) +int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport) { - struct uart_state *state = drv->state + port->line; + struct uart_state *state = drv->state + uport->line; + struct tty_port *port = &state->port; struct device *tty_dev; - struct uart_match match = {port, drv}; + struct uart_match match = {uport, drv}; - mutex_lock(&state->mutex); + mutex_lock(&port->mutex); - if (!console_suspend_enabled && uart_console(port)) { + if (!console_suspend_enabled && uart_console(uport)) { /* we're going to avoid suspending serial console */ - mutex_unlock(&state->mutex); + mutex_unlock(&port->mutex); return 0; } - tty_dev = device_find_child(port->dev, &match, serial_match_port); + tty_dev = device_find_child(uport->dev, &match, serial_match_port); if (device_may_wakeup(tty_dev)) { - enable_irq_wake(port->irq); + enable_irq_wake(uport->irq); put_device(tty_dev); - mutex_unlock(&state->mutex); + mutex_unlock(&port->mutex); return 0; } - port->suspended = 1; + uport->suspended = 1; - if (state->info.flags & UIF_INITIALIZED) { - const struct uart_ops *ops = port->ops; + if (port->flags & ASYNC_INITIALIZED) { + const struct uart_ops *ops = uport->ops; int tries; - state->info.flags = (state->info.flags & ~UIF_INITIALIZED) - | UIF_SUSPENDED; + set_bit(ASYNCB_SUSPENDED, &port->flags); + clear_bit(ASYNCB_INITIALIZED, &port->flags); - spin_lock_irq(&port->lock); - ops->stop_tx(port); - ops->set_mctrl(port, 0); - ops->stop_rx(port); - spin_unlock_irq(&port->lock); + spin_lock_irq(&uport->lock); + ops->stop_tx(uport); + ops->set_mctrl(uport, 0); + ops->stop_rx(uport); + spin_unlock_irq(&uport->lock); /* * Wait for the transmitter to empty. */ - for (tries = 3; !ops->tx_empty(port) && tries; tries--) + for (tries = 3; !ops->tx_empty(uport) && tries; tries--) msleep(10); if (!tries) printk(KERN_ERR "%s%s%s%d: Unable to drain " "transmitter\n", - port->dev ? dev_name(port->dev) : "", - port->dev ? ": " : "", + uport->dev ? dev_name(uport->dev) : "", + uport->dev ? ": " : "", drv->dev_name, - drv->tty_driver->name_base + port->line); + drv->tty_driver->name_base + uport->line); - ops->shutdown(port); + ops->shutdown(uport); } /* * Disable the console device before suspending. */ - if (uart_console(port)) - console_stop(port->cons); + if (uart_console(uport)) + console_stop(uport->cons); uart_change_pm(state, 3); - mutex_unlock(&state->mutex); + mutex_unlock(&port->mutex); return 0; } -int uart_resume_port(struct uart_driver *drv, struct uart_port *port) +int uart_resume_port(struct uart_driver *drv, struct uart_port *uport) { - struct uart_state *state = drv->state + port->line; + struct uart_state *state = drv->state + uport->line; + struct tty_port *port = &state->port; struct device *tty_dev; - struct uart_match match = {port, drv}; + struct uart_match match = {uport, drv}; + struct ktermios termios; - mutex_lock(&state->mutex); + mutex_lock(&port->mutex); - if (!console_suspend_enabled && uart_console(port)) { + if (!console_suspend_enabled && uart_console(uport)) { /* no need to resume serial console, it wasn't suspended */ - mutex_unlock(&state->mutex); + /* + * First try to use the console cflag setting. + */ + memset(&termios, 0, sizeof(struct ktermios)); + termios.c_cflag = uport->cons->cflag; + /* + * If that's unset, use the tty termios setting. + */ + if (termios.c_cflag == 0) + termios = *state->port.tty->termios; + else { + termios.c_ispeed = termios.c_ospeed = + tty_termios_input_baud_rate(&termios); + termios.c_ispeed = termios.c_ospeed = + tty_termios_baud_rate(&termios); + } + uport->ops->set_termios(uport, &termios, NULL); + mutex_unlock(&port->mutex); return 0; } - tty_dev = device_find_child(port->dev, &match, serial_match_port); - if (!port->suspended && device_may_wakeup(tty_dev)) { - disable_irq_wake(port->irq); - mutex_unlock(&state->mutex); + tty_dev = device_find_child(uport->dev, &match, serial_match_port); + if (!uport->suspended && device_may_wakeup(tty_dev)) { + disable_irq_wake(uport->irq); + mutex_unlock(&port->mutex); return 0; } - port->suspended = 0; + uport->suspended = 0; /* * Re-enable the console device after suspending. */ - if (uart_console(port)) { - struct ktermios termios; - - /* - * First try to use the console cflag setting. - */ - memset(&termios, 0, sizeof(struct ktermios)); - termios.c_cflag = port->cons->cflag; - - /* - * If that's unset, use the tty termios setting. - */ - if (state->info.port.tty && termios.c_cflag == 0) - termios = *state->info.port.tty->termios; - + if (uart_console(uport)) { uart_change_pm(state, 0); - port->ops->set_termios(port, &termios, NULL); - console_start(port->cons); + uport->ops->set_termios(uport, &termios, NULL); + console_start(uport->cons); } - if (state->info.flags & UIF_SUSPENDED) { - const struct uart_ops *ops = port->ops; + if (port->flags & ASYNC_SUSPENDED) { + const struct uart_ops *ops = uport->ops; int ret; uart_change_pm(state, 0); - spin_lock_irq(&port->lock); - ops->set_mctrl(port, 0); - spin_unlock_irq(&port->lock); - ret = ops->startup(port); + spin_lock_irq(&uport->lock); + ops->set_mctrl(uport, 0); + spin_unlock_irq(&uport->lock); + ret = ops->startup(uport); if (ret == 0) { uart_change_speed(state, NULL); - spin_lock_irq(&port->lock); - ops->set_mctrl(port, port->mctrl); - ops->start_tx(port); - spin_unlock_irq(&port->lock); - state->info.flags |= UIF_INITIALIZED; + spin_lock_irq(&uport->lock); + ops->set_mctrl(uport, uport->mctrl); + ops->start_tx(uport); + spin_unlock_irq(&uport->lock); + set_bit(ASYNCB_INITIALIZED, &port->flags); } else { /* * Failed to resume - maybe hardware went away? @@ -2117,10 +2137,10 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *port) uart_shutdown(state); } - state->info.flags &= ~UIF_SUSPENDED; + clear_bit(ASYNCB_SUSPENDED, &port->flags); } - mutex_unlock(&state->mutex); + mutex_unlock(&port->mutex); return 0; } @@ -2232,10 +2252,10 @@ static int uart_poll_init(struct tty_driver *driver, int line, char *options) int parity = 'n'; int flow = 'n'; - if (!state || !state->port) + if (!state || !state->uart_port) return -1; - port = state->port; + port = state->uart_port; if (!(port->ops->poll_get_char && port->ops->poll_put_char)) return -1; @@ -2253,10 +2273,10 @@ static int uart_poll_get_char(struct tty_driver *driver, int line) struct uart_state *state = drv->state + line; struct uart_port *port; - if (!state || !state->port) + if (!state || !state->uart_port) return -1; - port = state->port; + port = state->uart_port; return port->ops->poll_get_char(port); } @@ -2266,10 +2286,10 @@ static void uart_poll_put_char(struct tty_driver *driver, int line, char ch) struct uart_state *state = drv->state + line; struct uart_port *port; - if (!state || !state->port) + if (!state || !state->uart_port) return; - port = state->port; + port = state->uart_port; port->ops->poll_put_char(port, ch); } #endif @@ -2360,14 +2380,12 @@ int uart_register_driver(struct uart_driver *drv) */ for (i = 0; i < drv->nr; i++) { struct uart_state *state = drv->state + i; + struct tty_port *port = &state->port; - state->close_delay = 500; /* .5 seconds */ - state->closing_wait = 30000; /* 30 seconds */ - mutex_init(&state->mutex); - - tty_port_init(&state->info.port); - init_waitqueue_head(&state->info.delta_msr_wait); - tasklet_init(&state->info.tlet, uart_tasklet_action, + tty_port_init(port); + port->close_delay = 500; /* .5 seconds */ + port->closing_wait = 30000; /* 30 seconds */ + tasklet_init(&state->tlet, uart_tasklet_action, (unsigned long)state); } @@ -2408,69 +2426,71 @@ struct tty_driver *uart_console_device(struct console *co, int *index) /** * uart_add_one_port - attach a driver-defined port structure * @drv: pointer to the uart low level driver structure for this port - * @port: uart port structure to use for this port. + * @uport: uart port structure to use for this port. * * This allows the driver to register its own uart_port structure * with the core driver. The main purpose is to allow the low * level uart drivers to expand uart_port, rather than having yet * more levels of structures. */ -int uart_add_one_port(struct uart_driver *drv, struct uart_port *port) +int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport) { struct uart_state *state; + struct tty_port *port; int ret = 0; struct device *tty_dev; BUG_ON(in_interrupt()); - if (port->line >= drv->nr) + if (uport->line >= drv->nr) return -EINVAL; - state = drv->state + port->line; + state = drv->state + uport->line; + port = &state->port; mutex_lock(&port_mutex); - mutex_lock(&state->mutex); - if (state->port) { + mutex_lock(&port->mutex); + if (state->uart_port) { ret = -EINVAL; goto out; } - state->port = port; + state->uart_port = uport; state->pm_state = -1; - port->cons = drv->cons; - port->info = &state->info; + uport->cons = drv->cons; + uport->state = state; /* * If this port is a console, then the spinlock is already * initialised. */ - if (!(uart_console(port) && (port->cons->flags & CON_ENABLED))) { - spin_lock_init(&port->lock); - lockdep_set_class(&port->lock, &port_lock_key); + if (!(uart_console(uport) && (uport->cons->flags & CON_ENABLED))) { + spin_lock_init(&uport->lock); + lockdep_set_class(&uport->lock, &port_lock_key); } - uart_configure_port(drv, state, port); + uart_configure_port(drv, state, uport); /* * Register the port whether it's detected or not. This allows * setserial to be used to alter this ports parameters. */ - tty_dev = tty_register_device(drv->tty_driver, port->line, port->dev); + tty_dev = tty_register_device(drv->tty_driver, uport->line, uport->dev); if (likely(!IS_ERR(tty_dev))) { device_init_wakeup(tty_dev, 1); device_set_wakeup_enable(tty_dev, 0); } else printk(KERN_ERR "Cannot register tty device on line %d\n", - port->line); + uport->line); /* * Ensure UPF_DEAD is not set. */ - port->flags &= ~UPF_DEAD; + uport->flags &= ~UPF_DEAD; out: - mutex_unlock(&state->mutex); + mutex_unlock(&port->mutex); mutex_unlock(&port_mutex); return ret; @@ -2479,22 +2499,22 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *port) /** * uart_remove_one_port - detach a driver defined port structure * @drv: pointer to the uart low level driver structure for this port - * @port: uart port structure for this port + * @uport: uart port structure for this port * * This unhooks (and hangs up) the specified port structure from the * core driver. No further calls will be made to the low-level code * for this port. */ -int uart_remove_one_port(struct uart_driver *drv, struct uart_port *port) +int uart_remove_one_port(struct uart_driver *drv, struct uart_port *uport) { - struct uart_state *state = drv->state + port->line; - struct uart_info *info; + struct uart_state *state = drv->state + uport->line; + struct tty_port *port = &state->port; BUG_ON(in_interrupt()); - if (state->port != port) + if (state->uart_port != uport) printk(KERN_ALERT "Removing wrong port: %p != %p\n", - state->port, port); + state->uart_port, uport); mutex_lock(&port_mutex); @@ -2502,37 +2522,35 @@ int uart_remove_one_port(struct uart_driver *drv, struct uart_port *port) * Mark the port "dead" - this prevents any opens from * succeeding while we shut down the port. */ - mutex_lock(&state->mutex); - port->flags |= UPF_DEAD; - mutex_unlock(&state->mutex); + mutex_lock(&port->mutex); + uport->flags |= UPF_DEAD; + mutex_unlock(&port->mutex); /* * Remove the devices from the tty layer */ - tty_unregister_device(drv->tty_driver, port->line); + tty_unregister_device(drv->tty_driver, uport->line); - info = &state->info; - if (info && info->port.tty) - tty_vhangup(info->port.tty); + if (port->tty) + tty_vhangup(port->tty); /* * Free the port IO and memory resources, if any. */ - if (port->type != PORT_UNKNOWN) - port->ops->release_port(port); + if (uport->type != PORT_UNKNOWN) + uport->ops->release_port(uport); /* * Indicate that there isn't a port here anymore. */ - port->type = PORT_UNKNOWN; + uport->type = PORT_UNKNOWN; /* * Kill the tasklet, and free resources. */ - if (info) - tasklet_kill(&info->tlet); + tasklet_kill(&state->tlet); - state->port = NULL; + state->uart_port = NULL; mutex_unlock(&port_mutex); return 0; |