aboutsummaryrefslogtreecommitdiff
path: root/drivers/serial/pmac_zilog.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/serial/pmac_zilog.c')
-rw-r--r--drivers/serial/pmac_zilog.c246
1 files changed, 180 insertions, 66 deletions
diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c
index 683e66f18e8..f020de1cdd5 100644
--- a/drivers/serial/pmac_zilog.c
+++ b/drivers/serial/pmac_zilog.c
@@ -63,11 +63,17 @@
#include <asm/sections.h>
#include <asm/io.h>
#include <asm/irq.h>
+
+#ifdef CONFIG_PPC_PMAC
#include <asm/prom.h>
#include <asm/machdep.h>
#include <asm/pmac_feature.h>
#include <asm/dbdma.h>
#include <asm/macio.h>
+#else
+#include <linux/platform_device.h>
+#define of_machine_is_compatible(x) (0)
+#endif
#if defined (CONFIG_SERIAL_PMACZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
#define SUPPORT_SYSRQ
@@ -83,11 +89,9 @@
static char version[] __initdata = "pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)";
MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
-MODULE_DESCRIPTION("Driver for the PowerMac serial ports.");
+MODULE_DESCRIPTION("Driver for the Mac and PowerMac serial ports.");
MODULE_LICENSE("GPL");
-#define PWRDBG(fmt, arg...) printk(KERN_DEBUG fmt , ## arg)
-
#ifdef CONFIG_SERIAL_PMACZILOG_TTYS
#define PMACZILOG_MAJOR TTY_MAJOR
#define PMACZILOG_MINOR 64
@@ -153,8 +157,8 @@ static void pmz_load_zsregs(struct uart_pmac_port *uap, u8 *regs)
write_zsreg(uap, R10, regs[R10]);
/* Set TX/RX controls sans the enable bits. */
- write_zsreg(uap, R3, regs[R3] & ~RxENABLE);
- write_zsreg(uap, R5, regs[R5] & ~TxENABLE);
+ write_zsreg(uap, R3, regs[R3] & ~RxENABLE);
+ write_zsreg(uap, R5, regs[R5] & ~TxENABLE);
/* now set R7 "prime" on ESCC */
write_zsreg(uap, R15, regs[R15] | EN85C30);
@@ -205,7 +209,7 @@ static void pmz_load_zsregs(struct uart_pmac_port *uap, u8 *regs)
*/
static void pmz_maybe_update_regs(struct uart_pmac_port *uap)
{
- if (!ZS_REGS_HELD(uap)) {
+ if (!ZS_REGS_HELD(uap)) {
if (ZS_TX_ACTIVE(uap)) {
uap->flags |= PMACZILOG_FLAG_REGS_HELD;
} else {
@@ -281,7 +285,7 @@ static struct tty_struct *pmz_receive_chars(struct uart_pmac_port *uap)
spin_lock(&uap->port.lock);
if (swallow)
goto next_char;
- }
+ }
#endif /* CONFIG_MAGIC_SYSRQ && CONFIG_SERIAL_CORE_CONSOLE */
/* A real serial line, record the character and status. */
@@ -317,7 +321,7 @@ static struct tty_struct *pmz_receive_chars(struct uart_pmac_port *uap)
if (uap->port.ignore_status_mask == 0xff ||
(r1 & uap->port.ignore_status_mask) == 0) {
- tty_insert_flip_char(tty, ch, flag);
+ tty_insert_flip_char(tty, ch, flag);
}
if (r1 & Rx_OVR)
tty_insert_flip_char(tty, 0, TTY_OVERRUN);
@@ -341,7 +345,7 @@ static struct tty_struct *pmz_receive_chars(struct uart_pmac_port *uap)
uap->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK);
write_zsreg(uap, R1, uap->curregs[R1]);
zssync(uap);
- dev_err(&uap->dev->ofdev.dev, "pmz: rx irq flood !\n");
+ pmz_error("pmz: rx irq flood !\n");
return tty;
}
@@ -470,47 +474,47 @@ static irqreturn_t pmz_interrupt(int irq, void *dev_id)
uap_a = pmz_get_port_A(uap);
uap_b = uap_a->mate;
-
- spin_lock(&uap_a->port.lock);
+
+ spin_lock(&uap_a->port.lock);
r3 = read_zsreg(uap_a, R3);
#ifdef DEBUG_HARD
pmz_debug("irq, r3: %x\n", r3);
#endif
- /* Channel A */
+ /* Channel A */
tty = NULL;
- if (r3 & (CHAEXT | CHATxIP | CHARxIP)) {
+ if (r3 & (CHAEXT | CHATxIP | CHARxIP)) {
write_zsreg(uap_a, R0, RES_H_IUS);
zssync(uap_a);
- if (r3 & CHAEXT)
- pmz_status_handle(uap_a);
+ if (r3 & CHAEXT)
+ pmz_status_handle(uap_a);
if (r3 & CHARxIP)
tty = pmz_receive_chars(uap_a);
- if (r3 & CHATxIP)
- pmz_transmit_chars(uap_a);
- rc = IRQ_HANDLED;
- }
- spin_unlock(&uap_a->port.lock);
+ if (r3 & CHATxIP)
+ pmz_transmit_chars(uap_a);
+ rc = IRQ_HANDLED;
+ }
+ spin_unlock(&uap_a->port.lock);
if (tty != NULL)
tty_flip_buffer_push(tty);
if (uap_b->node == NULL)
goto out;
- spin_lock(&uap_b->port.lock);
+ spin_lock(&uap_b->port.lock);
tty = NULL;
if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) {
write_zsreg(uap_b, R0, RES_H_IUS);
zssync(uap_b);
- if (r3 & CHBEXT)
- pmz_status_handle(uap_b);
- if (r3 & CHBRxIP)
- tty = pmz_receive_chars(uap_b);
- if (r3 & CHBTxIP)
- pmz_transmit_chars(uap_b);
- rc = IRQ_HANDLED;
- }
- spin_unlock(&uap_b->port.lock);
+ if (r3 & CHBEXT)
+ pmz_status_handle(uap_b);
+ if (r3 & CHBRxIP)
+ tty = pmz_receive_chars(uap_b);
+ if (r3 & CHBTxIP)
+ pmz_transmit_chars(uap_b);
+ rc = IRQ_HANDLED;
+ }
+ spin_unlock(&uap_b->port.lock);
if (tty != NULL)
tty_flip_buffer_push(tty);
@@ -718,7 +722,7 @@ static void pmz_enable_ms(struct uart_port *port)
if (ZS_IS_ASLEEP(uap))
return;
- /* NOTE: Not subject to 'transmitter active' rule. */
+ /* NOTE: Not subject to 'transmitter active' rule. */
write_zsreg(uap, R15, uap->curregs[R15]);
}
}
@@ -748,7 +752,7 @@ static void pmz_break_ctl(struct uart_port *port, int break_state)
if (new_reg != uap->curregs[R5]) {
uap->curregs[R5] = new_reg;
- /* NOTE: Not subject to 'transmitter active' rule. */
+ /* NOTE: Not subject to 'transmitter active' rule. */
if (ZS_IS_ASLEEP(uap))
return;
write_zsreg(uap, R5, uap->curregs[R5]);
@@ -757,6 +761,8 @@ static void pmz_break_ctl(struct uart_port *port, int break_state)
spin_unlock_irqrestore(&port->lock, flags);
}
+#ifdef CONFIG_PPC_PMAC
+
/*
* Turn power on or off to the SCC and associated stuff
* (port drivers, modem, IR port, etc.)
@@ -792,6 +798,15 @@ static int pmz_set_scc_power(struct uart_pmac_port *uap, int state)
return delay;
}
+#else
+
+static int pmz_set_scc_power(struct uart_pmac_port *uap, int state)
+{
+ return 0;
+}
+
+#endif /* !CONFIG_PPC_PMAC */
+
/*
* FixZeroBug....Works around a bug in the SCC receving channel.
* Inspired from Darwin code, 15 Sept. 2000 -DanM
@@ -908,7 +923,6 @@ static int __pmz_startup(struct uart_pmac_port *uap)
/* Remember status for DCD/CTS changes */
uap->prev_status = read_zsreg(uap, R0);
-
return pwr_delay;
}
@@ -955,9 +969,9 @@ static int pmz_startup(struct uart_port *port)
}
pmz_get_port_A(uap)->flags |= PMACZILOG_FLAG_IS_IRQ_ON;
- if (request_irq(uap->port.irq, pmz_interrupt, IRQF_SHARED, "PowerMac Zilog", uap)) {
- dev_err(&uap->dev->ofdev.dev,
- "Unable to register zs interrupt handler.\n");
+ if (request_irq(uap->port.irq, pmz_interrupt, IRQF_SHARED,
+ "SCC", uap)) {
+ pmz_error("Unable to register zs interrupt handler.\n");
pmz_set_scc_power(uap, 0);
mutex_unlock(&pmz_irq_mutex);
return -ENXIO;
@@ -983,7 +997,7 @@ static int pmz_startup(struct uart_port *port)
if (!ZS_IS_EXTCLK(uap))
uap->curregs[R1] |= EXT_INT_ENAB;
write_zsreg(uap, R1, uap->curregs[R1]);
- spin_unlock_irqrestore(&port->lock, flags);
+ spin_unlock_irqrestore(&port->lock, flags);
pmz_debug("pmz: startup() done.\n");
@@ -1003,7 +1017,7 @@ static void pmz_shutdown(struct uart_port *port)
mutex_lock(&pmz_irq_mutex);
/* Release interrupt handler */
- free_irq(uap->port.irq, uap);
+ free_irq(uap->port.irq, uap);
spin_lock_irqsave(&port->lock, flags);
@@ -1051,7 +1065,6 @@ static void pmz_convert_to_zs(struct uart_pmac_port *uap, unsigned int cflag,
{
int brg;
-
/* Switch to external clocking for IrDA high clock rates. That
* code could be re-used for Midi interfaces with different
* multipliers
@@ -1198,7 +1211,7 @@ static void pmz_irda_setup(struct uart_pmac_port *uap, unsigned long *baud)
while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0
|| (read_zsreg(uap, R1) & ALL_SNT) == 0) {
if (--t <= 0) {
- dev_err(&uap->dev->ofdev.dev, "transmitter didn't drain\n");
+ pmz_error("transmitter didn't drain\n");
return;
}
udelay(10);
@@ -1214,7 +1227,7 @@ static void pmz_irda_setup(struct uart_pmac_port *uap, unsigned long *baud)
read_zsdata(uap);
mdelay(10);
if (--t <= 0) {
- dev_err(&uap->dev->ofdev.dev, "receiver didn't drain\n");
+ pmz_error("receiver didn't drain\n");
return;
}
}
@@ -1223,20 +1236,19 @@ static void pmz_irda_setup(struct uart_pmac_port *uap, unsigned long *baud)
uap->curregs[R5] |= DTR;
write_zsreg(uap, R5, uap->curregs[R5]);
zssync(uap);
- mdelay(1);
+ mdelay(1);
/* Switch SCC to 19200 */
pmz_convert_to_zs(uap, CS8, 0, 19200);
pmz_load_zsregs(uap, uap->curregs);
- mdelay(1);
+ mdelay(1);
/* Write get_version command byte */
write_zsdata(uap, 1);
t = 5000;
while ((read_zsreg(uap, R0) & Rx_CH_AV) == 0) {
if (--t <= 0) {
- dev_err(&uap->dev->ofdev.dev,
- "irda_setup timed out on get_version byte\n");
+ pmz_error("irda_setup timed out on get_version byte\n");
goto out;
}
udelay(10);
@@ -1244,8 +1256,7 @@ static void pmz_irda_setup(struct uart_pmac_port *uap, unsigned long *baud)
version = read_zsdata(uap);
if (version < 4) {
- dev_info(&uap->dev->ofdev.dev, "IrDA: dongle version %d not supported\n",
- version);
+ pmz_info("IrDA: dongle version %d not supported\n", version);
goto out;
}
@@ -1254,18 +1265,16 @@ static void pmz_irda_setup(struct uart_pmac_port *uap, unsigned long *baud)
t = 5000;
while ((read_zsreg(uap, R0) & Rx_CH_AV) == 0) {
if (--t <= 0) {
- dev_err(&uap->dev->ofdev.dev,
- "irda_setup timed out on speed mode byte\n");
+ pmz_error("irda_setup timed out on speed mode byte\n");
goto out;
}
udelay(10);
}
t = read_zsdata(uap);
if (t != cmdbyte)
- dev_err(&uap->dev->ofdev.dev,
- "irda_setup speed mode byte = %x (%x)\n", t, cmdbyte);
+ pmz_error("irda_setup speed mode byte = %x (%x)\n", t, cmdbyte);
- dev_info(&uap->dev->ofdev.dev, "IrDA setup for %ld bps, dongle version: %d\n",
+ pmz_info("IrDA setup for %ld bps, dongle version: %d\n",
*baud, version);
(void)read_zsdata(uap);
@@ -1415,7 +1424,7 @@ static void pmz_poll_put_char(struct uart_port *port, unsigned char c)
write_zsdata(uap, c);
}
-#endif
+#endif /* CONFIG_CONSOLE_POLL */
static struct uart_ops pmz_pops = {
.tx_empty = pmz_tx_empty,
@@ -1440,6 +1449,8 @@ static struct uart_ops pmz_pops = {
#endif
};
+#ifdef CONFIG_PPC_PMAC
+
/*
* Setup one port structure after probing, HW is down at this point,
* Unlike sunzilog, we don't need to pre-init the spinlock as we don't
@@ -1463,7 +1474,7 @@ static int __init pmz_init_port(struct uart_pmac_port *uap)
return -ENODEV;
uap->port.mapbase = r_ports.start;
uap->port.membase = ioremap(uap->port.mapbase, 0x1000);
-
+
uap->control_reg = uap->port.membase;
uap->data_reg = uap->control_reg + 0x10;
@@ -1590,7 +1601,7 @@ static void pmz_dispose_port(struct uart_pmac_port *uap)
}
/*
- * Called upon match with an escc node in the devive-tree.
+ * Called upon match with an escc node in the device-tree.
*/
static int pmz_attach(struct macio_dev *mdev, const struct of_device_id *match)
{
@@ -1812,7 +1823,7 @@ static int __init pmz_probe(void)
pmz_ports[count].node = node_a;
pmz_ports[count+1].node = node_b;
pmz_ports[count].port.line = count;
- pmz_ports[count+1].port.line = count+1;
+ pmz_ports[count+1].port.line = count+1;
/*
* Setup the ports for real
@@ -1836,6 +1847,88 @@ next:
return 0;
}
+#else
+
+extern struct platform_device scc_a_pdev, scc_b_pdev;
+
+static int __init pmz_init_port(struct uart_pmac_port *uap)
+{
+ struct resource *r_ports;
+ int irq;
+
+ r_ports = platform_get_resource(uap->node, IORESOURCE_MEM, 0);
+ irq = platform_get_irq(uap->node, 0);
+ if (!r_ports || !irq)
+ return -ENODEV;
+
+ uap->port.mapbase = r_ports->start;
+ uap->port.membase = (unsigned char __iomem *) r_ports->start;
+ uap->port.iotype = UPIO_MEM;
+ uap->port.irq = irq;
+ uap->port.uartclk = ZS_CLOCK;
+ uap->port.fifosize = 1;
+ uap->port.ops = &pmz_pops;
+ uap->port.type = PORT_PMAC_ZILOG;
+ uap->port.flags = 0;
+
+ uap->control_reg = uap->port.membase;
+ uap->data_reg = uap->control_reg + 4;
+ uap->port_type = 0;
+
+ pmz_convert_to_zs(uap, CS8, 0, 9600);
+
+ return 0;
+}
+
+static int __init pmz_probe(void)
+{
+ int err;
+
+ pmz_ports_count = 0;
+
+ pmz_ports[0].mate = &pmz_ports[1];
+ pmz_ports[0].port.line = 0;
+ pmz_ports[0].flags = PMACZILOG_FLAG_IS_CHANNEL_A;
+ pmz_ports[0].node = &scc_a_pdev;
+ err = pmz_init_port(&pmz_ports[0]);
+ if (err)
+ return err;
+ pmz_ports_count++;
+
+ pmz_ports[1].mate = &pmz_ports[0];
+ pmz_ports[1].port.line = 1;
+ pmz_ports[1].flags = 0;
+ pmz_ports[1].node = &scc_b_pdev;
+ err = pmz_init_port(&pmz_ports[1]);
+ if (err)
+ return err;
+ pmz_ports_count++;
+
+ return 0;
+}
+
+static void pmz_dispose_port(struct uart_pmac_port *uap)
+{
+ memset(uap, 0, sizeof(struct uart_pmac_port));
+}
+
+static int __init pmz_attach(struct platform_device *pdev)
+{
+ int i;
+
+ for (i = 0; i < pmz_ports_count; i++)
+ if (pmz_ports[i].node == pdev)
+ return 0;
+ return -ENODEV;
+}
+
+static int __exit pmz_detach(struct platform_device *pdev)
+{
+ return 0;
+}
+
+#endif /* !CONFIG_PPC_PMAC */
+
#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE
static void pmz_console_write(struct console *con, const char *s, unsigned int count);
@@ -1896,28 +1989,41 @@ err_out:
return rc;
}
+#ifdef CONFIG_PPC_PMAC
+
static struct of_device_id pmz_match[] =
{
{
- .name = "ch-a",
+ .name = "ch-a",
},
{
- .name = "ch-b",
+ .name = "ch-b",
},
{},
};
MODULE_DEVICE_TABLE (of, pmz_match);
-static struct macio_driver pmz_driver =
-{
+static struct macio_driver pmz_driver = {
.name = "pmac_zilog",
.match_table = pmz_match,
.probe = pmz_attach,
.remove = pmz_detach,
.suspend = pmz_suspend,
- .resume = pmz_resume,
+ .resume = pmz_resume,
};
+#else
+
+static struct platform_driver pmz_driver = {
+ .remove = __exit_p(pmz_detach),
+ .driver = {
+ .name = "scc",
+ .owner = THIS_MODULE,
+ },
+};
+
+#endif /* !CONFIG_PPC_PMAC */
+
static int __init init_pmz(void)
{
int rc, i;
@@ -1952,19 +2058,27 @@ static int __init init_pmz(void)
pmz_dispose_port(&pmz_ports[i]);
return rc;
}
-
+
/*
* Then we register the macio driver itself
*/
+#ifdef CONFIG_PPC_PMAC
return macio_register_driver(&pmz_driver);
+#else
+ return platform_driver_probe(&pmz_driver, pmz_attach);
+#endif
}
static void __exit exit_pmz(void)
{
int i;
+#ifdef CONFIG_PPC_PMAC
/* Get rid of macio-driver (detach from macio) */
macio_unregister_driver(&pmz_driver);
+#else
+ platform_driver_unregister(&pmz_driver);
+#endif
for (i = 0; i < pmz_ports_count; i++) {
struct uart_pmac_port *uport = &pmz_ports[i];
@@ -2031,10 +2145,10 @@ static int __init pmz_console_setup(struct console *co, char *options)
/*
* XServe's default to 57600 bps
*/
- if (machine_is_compatible("RackMac1,1")
- || machine_is_compatible("RackMac1,2")
- || machine_is_compatible("MacRISC4"))
- baud = 57600;
+ if (of_machine_is_compatible("RackMac1,1")
+ || of_machine_is_compatible("RackMac1,2")
+ || of_machine_is_compatible("MacRISC4"))
+ baud = 57600;
/*
* Check whether an invalid uart number has been specified, and
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-02 21:33:36 +0000