diff options
Diffstat (limited to 'drivers/serial/ifx6x60.c')
| -rw-r--r-- | drivers/serial/ifx6x60.c | 1406 |
1 files changed, 0 insertions, 1406 deletions
diff --git a/drivers/serial/ifx6x60.c b/drivers/serial/ifx6x60.c deleted file mode 100644 index ab93763862d..00000000000 --- a/drivers/serial/ifx6x60.c +++ /dev/null @@ -1,1406 +0,0 @@ -/**************************************************************************** - * - * Driver for the IFX 6x60 spi modem. - * - * Copyright (C) 2008 Option International - * Copyright (C) 2008 Filip Aben <f.aben@option.com> - * Denis Joseph Barrow <d.barow@option.com> - * Jan Dumon <j.dumon@option.com> - * - * Copyright (C) 2009, 2010 Intel Corp - * Russ Gorby <richardx.r.gorby@intel.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, - * USA - * - * Driver modified by Intel from Option gtm501l_spi.c - * - * Notes - * o The driver currently assumes a single device only. If you need to - * change this then look for saved_ifx_dev and add a device lookup - * o The driver is intended to be big-endian safe but has never been - * tested that way (no suitable hardware). There are a couple of FIXME - * notes by areas that may need addressing - * o Some of the GPIO naming/setup assumptions may need revisiting if - * you need to use this driver for another platform. - * - *****************************************************************************/ -#include <linux/module.h> -#include <linux/termios.h> -#include <linux/tty.h> -#include <linux/device.h> -#include <linux/spi/spi.h> -#include <linux/tty.h> -#include <linux/kfifo.h> -#include <linux/tty_flip.h> -#include <linux/timer.h> -#include <linux/serial.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/rfkill.h> -#include <linux/fs.h> -#include <linux/ip.h> -#include <linux/dmapool.h> -#include <linux/gpio.h> -#include <linux/sched.h> -#include <linux/time.h> -#include <linux/wait.h> -#include <linux/tty.h> -#include <linux/pm.h> -#include <linux/pm_runtime.h> -#include <linux/spi/ifx_modem.h> -#include <linux/delay.h> - -#include "ifx6x60.h" - -#define IFX_SPI_MORE_MASK 0x10 -#define IFX_SPI_MORE_BIT 12 /* bit position in u16 */ -#define IFX_SPI_CTS_BIT 13 /* bit position in u16 */ -#define IFX_SPI_TTY_ID 0 -#define IFX_SPI_TIMEOUT_SEC 2 -#define IFX_SPI_HEADER_0 (-1) -#define IFX_SPI_HEADER_F (-2) - -/* forward reference */ -static void ifx_spi_handle_srdy(struct ifx_spi_device *ifx_dev); - -/* local variables */ -static int spi_b16 = 1; /* 8 or 16 bit word length */ -static struct tty_driver *tty_drv; -static struct ifx_spi_device *saved_ifx_dev; -static struct lock_class_key ifx_spi_key; - -/* GPIO/GPE settings */ - -/** - * mrdy_set_high - set MRDY GPIO - * @ifx: device we are controlling - * - */ -static inline void mrdy_set_high(struct ifx_spi_device *ifx) -{ - gpio_set_value(ifx->gpio.mrdy, 1); -} - -/** - * mrdy_set_low - clear MRDY GPIO - * @ifx: device we are controlling - * - */ -static inline void mrdy_set_low(struct ifx_spi_device *ifx) -{ - gpio_set_value(ifx->gpio.mrdy, 0); -} - -/** - * ifx_spi_power_state_set - * @ifx_dev: our SPI device - * @val: bits to set - * - * Set bit in power status and signal power system if status becomes non-0 - */ -static void -ifx_spi_power_state_set(struct ifx_spi_device *ifx_dev, unsigned char val) -{ - unsigned long flags; - - spin_lock_irqsave(&ifx_dev->power_lock, flags); - - /* - * if power status is already non-0, just update, else - * tell power system - */ - if (!ifx_dev->power_status) - pm_runtime_get(&ifx_dev->spi_dev->dev); - ifx_dev->power_status |= val; - - spin_unlock_irqrestore(&ifx_dev->power_lock, flags); -} - -/** - * ifx_spi_power_state_clear - clear power bit - * @ifx_dev: our SPI device - * @val: bits to clear - * - * clear bit in power status and signal power system if status becomes 0 - */ -static void -ifx_spi_power_state_clear(struct ifx_spi_device *ifx_dev, unsigned char val) -{ - unsigned long flags; - - spin_lock_irqsave(&ifx_dev->power_lock, flags); - - if (ifx_dev->power_status) { - ifx_dev->power_status &= ~val; - if (!ifx_dev->power_status) - pm_runtime_put(&ifx_dev->spi_dev->dev); - } - - spin_unlock_irqrestore(&ifx_dev->power_lock, flags); -} - -/** - * swap_buf - * @buf: our buffer - * @len : number of bytes (not words) in the buffer - * @end: end of buffer - * - * Swap the contents of a buffer into big endian format - */ -static inline void swap_buf(u16 *buf, int len, void *end) -{ - int n; - - len = ((len + 1) >> 1); - if ((void *)&buf[len] > end) { - pr_err("swap_buf: swap exceeds boundary (%p > %p)!", - &buf[len], end); - return; - } - for (n = 0; n < len; n++) { - *buf = cpu_to_be16(*buf); - buf++; - } -} - -/** - * mrdy_assert - assert MRDY line - * @ifx_dev: our SPI device - * - * Assert mrdy and set timer to wait for SRDY interrupt, if SRDY is low - * now. - * - * FIXME: Can SRDY even go high as we are running this code ? - */ -static void mrdy_assert(struct ifx_spi_device *ifx_dev) -{ - int val = gpio_get_value(ifx_dev->gpio.srdy); - if (!val) { - if (!test_and_set_bit(IFX_SPI_STATE_TIMER_PENDING, - &ifx_dev->flags)) { - ifx_dev->spi_timer.expires = - jiffies + IFX_SPI_TIMEOUT_SEC*HZ; - add_timer(&ifx_dev->spi_timer); - - } - } - ifx_spi_power_state_set(ifx_dev, IFX_SPI_POWER_DATA_PENDING); - mrdy_set_high(ifx_dev); -} - -/** - * ifx_spi_hangup - hang up an IFX device - * @ifx_dev: our SPI device - * - * Hang up the tty attached to the IFX device if one is currently - * open. If not take no action - */ -static void ifx_spi_ttyhangup(struct ifx_spi_device *ifx_dev) -{ - struct tty_port *pport = &ifx_dev->tty_port; - struct tty_struct *tty = tty_port_tty_get(pport); - if (tty) { - tty_hangup(tty); - tty_kref_put(tty); - } -} - -/** - * ifx_spi_timeout - SPI timeout - * @arg: our SPI device - * - * The SPI has timed out: hang up the tty. Users will then see a hangup - * and error events. - */ -static void ifx_spi_timeout(unsigned long arg) -{ - struct ifx_spi_device *ifx_dev = (struct ifx_spi_device *)arg; - - dev_warn(&ifx_dev->spi_dev->dev, "*** SPI Timeout ***"); - ifx_spi_ttyhangup(ifx_dev); - mrdy_set_low(ifx_dev); - clear_bit(IFX_SPI_STATE_TIMER_PENDING, &ifx_dev->flags); -} - -/* char/tty operations */ - -/** - * ifx_spi_tiocmget - get modem lines - * @tty: our tty device - * @filp: file handle issuing the request - * - * Map the signal state into Linux modem flags and report the value - * in Linux terms - */ -static int ifx_spi_tiocmget(struct tty_struct *tty, struct file *filp) -{ - unsigned int value; - struct ifx_spi_device *ifx_dev = tty->driver_data; - - value = - (test_bit(IFX_SPI_RTS, &ifx_dev->signal_state) ? TIOCM_RTS : 0) | - (test_bit(IFX_SPI_DTR, &ifx_dev->signal_state) ? TIOCM_DTR : 0) | - (test_bit(IFX_SPI_CTS, &ifx_dev->signal_state) ? TIOCM_CTS : 0) | - (test_bit(IFX_SPI_DSR, &ifx_dev->signal_state) ? TIOCM_DSR : 0) | - (test_bit(IFX_SPI_DCD, &ifx_dev->signal_state) ? TIOCM_CAR : 0) | - (test_bit(IFX_SPI_RI, &ifx_dev->signal_state) ? TIOCM_RNG : 0); - return value; -} - -/** - * ifx_spi_tiocmset - set modem bits - * @tty: the tty structure - * @filp: file handle issuing the request - * @set: bits to set - * @clear: bits to clear - * - * The IFX6x60 only supports DTR and RTS. Set them accordingly - * and flag that an update to the modem is needed. - * - * FIXME: do we need to kick the tranfers when we do this ? - */ -static int ifx_spi_tiocmset(struct tty_struct *tty, struct file *filp, - unsigned int set, unsigned int clear) -{ - struct ifx_spi_device *ifx_dev = tty->driver_data; - - if (set & TIOCM_RTS) - set_bit(IFX_SPI_RTS, &ifx_dev->signal_state); - if (set & TIOCM_DTR) - set_bit(IFX_SPI_DTR, &ifx_dev->signal_state); - if (clear & TIOCM_RTS) - clear_bit(IFX_SPI_RTS, &ifx_dev->signal_state); - if (clear & TIOCM_DTR) - clear_bit(IFX_SPI_DTR, &ifx_dev->signal_state); - - set_bit(IFX_SPI_UPDATE, &ifx_dev->signal_state); - return 0; -} - -/** - * ifx_spi_open - called on tty open - * @tty: our tty device - * @filp: file handle being associated with the tty - * - * Open the tty interface. We let the tty_port layer do all the work - * for us. - * - * FIXME: Remove single device assumption and saved_ifx_dev - */ -static int ifx_spi_open(struct tty_struct *tty, struct file *filp) -{ - return tty_port_open(&saved_ifx_dev->tty_port, tty, filp); -} - -/** - * ifx_spi_close - called when our tty closes - * @tty: the tty being closed - * @filp: the file handle being closed - * - * Perform the close of the tty. We use the tty_port layer to do all - * our hard work. - */ -static void ifx_spi_close(struct tty_struct *tty, struct file *filp) -{ - struct ifx_spi_device *ifx_dev = tty->driver_data; - tty_port_close(&ifx_dev->tty_port, tty, filp); - /* FIXME: should we do an ifx_spi_reset here ? */ -} - -/** - * ifx_decode_spi_header - decode received header - * @buffer: the received data - * @length: decoded length - * @more: decoded more flag - * @received_cts: status of cts we received - * - * Note how received_cts is handled -- if header is all F it is left - * the same as it was, if header is all 0 it is set to 0 otherwise it is - * taken from the incoming header. - * - * FIXME: endianness - */ -static int ifx_spi_decode_spi_header(unsigned char *buffer, int *length, - unsigned char *more, unsigned char *received_cts) -{ - u16 h1; - u16 h2; - u16 *in_buffer = (u16 *)buffer; - - h1 = *in_buffer; - h2 = *(in_buffer+1); - - if (h1 == 0 && h2 == 0) { - *received_cts = 0; - return IFX_SPI_HEADER_0; - } else if (h1 == 0xffff && h2 == 0xffff) { - /* spi_slave_cts remains as it was */ - return IFX_SPI_HEADER_F; - } - - *length = h1 & 0xfff; /* upper bits of byte are flags */ - *more = (buffer[1] >> IFX_SPI_MORE_BIT) & 1; - *received_cts = (buffer[3] >> IFX_SPI_CTS_BIT) & 1; - return 0; -} - -/** - * ifx_setup_spi_header - set header fields - * @txbuffer: pointer to start of SPI buffer - * @tx_count: bytes - * @more: indicate if more to follow - * - * Format up an SPI header for a transfer - * - * FIXME: endianness? - */ -static void ifx_spi_setup_spi_header(unsigned char *txbuffer, int tx_count, - unsigned char more) -{ - *(u16 *)(txbuffer) = tx_count; - *(u16 *)(txbuffer+2) = IFX_SPI_PAYLOAD_SIZE; - txbuffer[1] |= (more << IFX_SPI_MORE_BIT) & IFX_SPI_MORE_MASK; -} - -/** - * ifx_spi_wakeup_serial - SPI space made - * @port_data: our SPI device - * - * We have emptied the FIFO enough that we want to get more data - * queued into it. Poke the line discipline via tty_wakeup so that - * it will feed us more bits - */ -static void ifx_spi_wakeup_serial(struct ifx_spi_device *ifx_dev) -{ - struct tty_struct *tty; - - tty = tty_port_tty_get(&ifx_dev->tty_port); - if (!tty) - return; - tty_wakeup(tty); - tty_kref_put(tty); -} - -/** - * ifx_spi_prepare_tx_buffer - prepare transmit frame - * @ifx_dev: our SPI device - * - * The transmit buffr needs a header and various other bits of - * information followed by as much data as we can pull from the FIFO - * and transfer. This function formats up a suitable buffer in the - * ifx_dev->tx_buffer - * - * FIXME: performance - should we wake the tty when the queue is half - * empty ? - */ -static int ifx_spi_prepare_tx_buffer(struct ifx_spi_device *ifx_dev) -{ - int temp_count; - int queue_length; - int tx_count; - unsigned char *tx_buffer; - - tx_buffer = ifx_dev->tx_buffer; - memset(tx_buffer, 0, IFX_SPI_TRANSFER_SIZE); - - /* make room for required SPI header */ - tx_buffer += IFX_SPI_HEADER_OVERHEAD; - tx_count = IFX_SPI_HEADER_OVERHEAD; - - /* clear to signal no more data if this turns out to be the - * last buffer sent in a sequence */ - ifx_dev->spi_more = 0; - - /* if modem cts is set, just send empty buffer */ - if (!ifx_dev->spi_slave_cts) { - /* see if there's tx data */ - queue_length = kfifo_len(&ifx_dev->tx_fifo); - if (queue_length != 0) { - /* data to mux -- see if there's room for it */ - temp_count = min(queue_length, IFX_SPI_PAYLOAD_SIZE); - temp_count = kfifo_out_locked(&ifx_dev->tx_fifo, - tx_buffer, temp_count, - &ifx_dev->fifo_lock); - - /* update buffer pointer and data count in message */ - tx_buffer += temp_count; - tx_count += temp_count; - if (temp_count == queue_length) - /* poke port to get more data */ - ifx_spi_wakeup_serial(ifx_dev); - else /* more data in port, use next SPI message */ - ifx_dev->spi_more = 1; - } - } - /* have data and info for header -- set up SPI header in buffer */ - /* spi header needs payload size, not entire buffer size */ - ifx_spi_setup_spi_header(ifx_dev->tx_buffer, - tx_count-IFX_SPI_HEADER_OVERHEAD, - ifx_dev->spi_more); - /* swap actual data in the buffer */ - swap_buf((u16 *)(ifx_dev->tx_buffer), tx_count, - &ifx_dev->tx_buffer[IFX_SPI_TRANSFER_SIZE]); - return tx_count; -} - -/** - * ifx_spi_write - line discipline write - * @tty: our tty device - * @buf: pointer to buffer to write (kernel space) - * @count: size of buffer - * - * Write the characters we have been given into the FIFO. If the device - * is not active then activate it, when the SRDY line is asserted back - * this will commence I/O - */ -static int ifx_spi_write(struct tty_struct *tty, const unsigned char *buf, - int count) -{ - struct ifx_spi_device *ifx_dev = tty->driver_data; - unsigned char *tmp_buf = (unsigned char *)buf; - int tx_count = kfifo_in_locked(&ifx_dev->tx_fifo, tmp_buf, count, - &ifx_dev->fifo_lock); - mrdy_assert(ifx_dev); - return tx_count; -} - -/** - * ifx_spi_chars_in_buffer - line discipline helper - * @tty: our tty device - * - * Report how much data we can accept before we drop bytes. As we use - * a simple FIFO this is nice and easy. - */ -static int ifx_spi_write_room(struct tty_struct *tty) -{ - struct ifx_spi_device *ifx_dev = tty->driver_data; - return IFX_SPI_FIFO_SIZE - kfifo_len(&ifx_dev->tx_fifo); -} - -/** - * ifx_spi_chars_in_buffer - line discipline helper - * @tty: our tty device - * - * Report how many characters we have buffered. In our case this is the - * number of bytes sitting in our transmit FIFO. - */ -static int ifx_spi_chars_in_buffer(struct tty_struct *tty) -{ - struct ifx_spi_device *ifx_dev = tty->driver_data; - return kfifo_len(&ifx_dev->tx_fifo); -} - -/** - * ifx_port_hangup - * @port: our tty port - * - * tty port hang up. Called when tty_hangup processing is invoked either - * by loss of carrier, or by software (eg vhangup). Serialized against - * activate/shutdown by the tty layer. - */ -static void ifx_spi_hangup(struct tty_struct *tty) -{ - struct ifx_spi_device *ifx_dev = tty->driver_data; - tty_port_hangup(&ifx_dev->tty_port); -} - -/** - * ifx_port_activate - * @port: our tty port - * - * tty port activate method - called for first open. Serialized - * with hangup and shutdown by the tty layer. - */ -static int ifx_port_activate(struct tty_port *port, struct tty_struct *tty) -{ - struct ifx_spi_device *ifx_dev = - container_of(port, struct ifx_spi_device, tty_port); - - /* clear any old data; can't do this in 'close' */ - kfifo_reset(&ifx_dev->tx_fifo); - - /* put port data into this tty */ - tty->driver_data = ifx_dev; - - /* allows flip string push from int context */ - tty->low_latency = 1; - - return 0; -} - -/** - * ifx_port_shutdown - * @port: our tty port - * - * tty port shutdown method - called for last port close. Serialized - * with hangup and activate by the tty layer. - */ -static void ifx_port_shutdown(struct tty_port *port) -{ - struct ifx_spi_device *ifx_dev = - container_of(port, struct ifx_spi_device, tty_port); - - mrdy_set_low(ifx_dev); - clear_bit(IFX_SPI_STATE_TIMER_PENDING, &ifx_dev->flags); - tasklet_kill(&ifx_dev->io_work_tasklet); -} - -static const struct tty_port_operations ifx_tty_port_ops = { - .activate = ifx_port_activate, - .shutdown = ifx_port_shutdown, -}; - -static const struct tty_operations ifx_spi_serial_ops = { - .open = ifx_spi_open, - .close = ifx_spi_close, - .write = ifx_spi_write, - .hangup = ifx_spi_hangup, - .write_room = ifx_spi_write_room, - .chars_in_buffer = ifx_spi_chars_in_buffer, - .tiocmget = ifx_spi_tiocmget, - .tiocmset = ifx_spi_tiocmset, -}; - -/** - * ifx_spi_insert_fip_string - queue received data - * @ifx_ser: our SPI device - * @chars: buffer we have received - * @size: number of chars reeived - * - * Queue bytes to the tty assuming the tty side is currently open. If - * not the discard the data. - */ -static void ifx_spi_insert_flip_string(struct ifx_spi_device *ifx_dev, - unsigned char *chars, size_t size) -{ - struct tty_struct *tty = tty_port_tty_get(&ifx_dev->tty_port); - if (!tty) - return; - tty_insert_flip_string(tty, chars, size); - tty_flip_buffer_push(tty); - tty_kref_put(tty); -} - -/** - * ifx_spi_complete - SPI transfer completed - * @ctx: our SPI device - * - * An SPI transfer has completed. Process any received data and kick off - * any further transmits we can commence. - */ -static void ifx_spi_complete(void *ctx) -{ - struct ifx_spi_device *ifx_dev = ctx; - struct tty_struct *tty; - struct tty_ldisc *ldisc = NULL; - int length; - int actual_length; - unsigned char more; - unsigned char cts; - int local_write_pending = 0; - int queue_length; - int srdy; - int decode_result; - - mrdy_set_low(ifx_dev); - - if (!ifx_dev->spi_msg.status) { - /* check header validity, get comm flags */ - swap_buf((u16 *)ifx_dev->rx_buffer, IFX_SPI_HEADER_OVERHEAD, - &ifx_dev->rx_buffer[IFX_SPI_HEADER_OVERHEAD]); - decode_result = ifx_spi_decode_spi_header(ifx_dev->rx_buffer, - &length, &more, &cts); - if (decode_result == IFX_SPI_HEADER_0) { - dev_dbg(&ifx_dev->spi_dev->dev, - "ignore input: invalid header 0"); - ifx_dev->spi_slave_cts = 0; - goto complete_exit; - } else if (decode_result == IFX_SPI_HEADER_F) { - dev_dbg(&ifx_dev->spi_dev->dev, - "ignore input: invalid header F"); - goto complete_exit; - } - - ifx_dev->spi_slave_cts = cts; - - actual_length = min((unsigned int)length, - ifx_dev->spi_msg.actual_length); - swap_buf((u16 *)(ifx_dev->rx_buffer + IFX_SPI_HEADER_OVERHEAD), - actual_length, - &ifx_dev->rx_buffer[IFX_SPI_TRANSFER_SIZE]); - ifx_spi_insert_flip_string( - ifx_dev, - ifx_dev->rx_buffer + IFX_SPI_HEADER_OVERHEAD, - (size_t)actual_length); - } else { - dev_dbg(&ifx_dev->spi_dev->dev, "SPI transfer error %d", - ifx_dev->spi_msg.status); - } - -complete_exit: - if (ifx_dev->write_pending) { - ifx_dev->write_pending = 0; - local_write_pending = 1; - } - - clear_bit(IFX_SPI_STATE_IO_IN_PROGRESS, &(ifx_dev->flags)); - - queue_length = kfifo_len(&ifx_dev->tx_fifo); - srdy = gpio_get_value(ifx_dev->gpio.srdy); - if (!srdy) - ifx_spi_power_state_clear(ifx_dev, IFX_SPI_POWER_SRDY); - - /* schedule output if there is more to do */ - if (test_and_clear_bit(IFX_SPI_STATE_IO_READY, &ifx_dev->flags)) - tasklet_schedule(&ifx_dev->io_work_tasklet); - else { - if (more || ifx_dev->spi_more || queue_length > 0 || - local_write_pending) { - if (ifx_dev->spi_slave_cts) { - if (more) - mrdy_assert(ifx_dev); - } else - mrdy_assert(ifx_dev); - } else { - /* - * poke line discipline driver if any for more data - * may or may not get more data to write - * for now, say not busy - */ - ifx_spi_power_state_clear(ifx_dev, - IFX_SPI_POWER_DATA_PENDING); - tty = tty_port_tty_get(&ifx_dev->tty_port); - if (tty) { - ldisc = tty_ldisc_ref(tty); - if (ldisc) { - ldisc->ops->write_wakeup(tty); - tty_ldisc_deref(ldisc); - } - tty_kref_put(tty); - } - } - } -} - -/** - * ifx_spio_io - I/O tasklet - * @data: our SPI device - * - * Queue data for transmission if possible and then kick off the - * transfer. - */ -static void ifx_spi_io(unsigned long data) -{ - int retval; - struct ifx_spi_device *ifx_dev = (struct ifx_spi_device *) data; - - if (!test_and_set_bit(IFX_SPI_STATE_IO_IN_PROGRESS, &ifx_dev->flags)) { - if (ifx_dev->gpio.unack_srdy_int_nb > 0) - ifx_dev->gpio.unack_srdy_int_nb--; - - ifx_spi_prepare_tx_buffer(ifx_dev); - - spi_message_init(&ifx_dev->spi_msg); - INIT_LIST_HEAD(&ifx_dev->spi_msg.queue); - - ifx_dev->spi_msg.context = ifx_dev; - ifx_dev->spi_msg.complete = ifx_spi_complete; - - /* set up our spi transfer */ - /* note len is BYTES, not transfers */ - ifx_dev->spi_xfer.len = IFX_SPI_TRANSFER_SIZE; - ifx_dev->spi_xfer.cs_change = 0; - ifx_dev->spi_xfer.speed_hz = 12500000; - /* ifx_dev->spi_xfer.speed_hz = 390625; */ - ifx_dev->spi_xfer.bits_per_word = spi_b16 ? 16 : 8; - - ifx_dev->spi_xfer.tx_buf = ifx_dev->tx_buffer; - ifx_dev->spi_xfer.rx_buf = ifx_dev->rx_buffer; - - /* - * setup dma pointers - */ - if (ifx_dev->is_6160) { - ifx_dev->spi_msg.is_dma_mapped = 1; - ifx_dev->tx_dma = ifx_dev->tx_bus; - ifx_dev->rx_dma = ifx_dev->rx_bus; - ifx_dev->spi_xfer.tx_dma = ifx_dev->tx_dma; - ifx_dev->spi_xfer.rx_dma = ifx_dev->rx_dma; - } else { - ifx_dev->spi_msg.is_dma_mapped = 0; - ifx_dev->tx_dma = (dma_addr_t)0; - ifx_dev->rx_dma = (dma_addr_t)0; - ifx_dev->spi_xfer.tx_dma = (dma_addr_t)0; - ifx_dev->spi_xfer.rx_dma = (dma_addr_t)0; - } - - spi_message_add_tail(&ifx_dev->spi_xfer, &ifx_dev->spi_msg); - - /* Assert MRDY. This may have already been done by the write - * routine. - */ - mrdy_assert(ifx_dev); - - retval = spi_async(ifx_dev->spi_dev, &ifx_dev->spi_msg); - if (retval) { - clear_bit(IFX_SPI_STATE_IO_IN_PROGRESS, - &ifx_dev->flags); - tasklet_schedule(&ifx_dev->io_work_tasklet); - return; - } - } else - ifx_dev->write_pending = 1; -} - -/** - * ifx_spi_free_port - free up the tty side - * @ifx_dev: IFX device going away - * - * Unregister and free up a port when the device goes away - */ -static void ifx_spi_free_port(struct ifx_spi_device *ifx_dev) -{ - if (ifx_dev->tty_dev) - tty_unregister_device(tty_drv, ifx_dev->minor); - kfifo_free(&ifx_dev->tx_fifo); -} - -/** - * ifx_spi_create_port - create a new port - * @ifx_dev: our spi device - * - * Allocate and initialise the tty port that goes with this interface - * and add it to the tty layer so that it can be opened. - */ -static int ifx_spi_create_port(struct ifx_spi_device *ifx_dev) -{ - int ret = 0; - struct tty_port *pport = &ifx_dev->tty_port; - - spin_lock_init(&ifx_dev->fifo_lock); - lockdep_set_class_and_subclass(&ifx_dev->fifo_lock, - &ifx_spi_key, 0); - - if (kfifo_alloc(&ifx_dev->tx_fifo, IFX_SPI_FIFO_SIZE, GFP_KERNEL)) { - ret = -ENOMEM; - goto error_ret; - } - - pport->ops = &ifx_tty_port_ops; - tty_port_init(pport); - ifx_dev->minor = IFX_SPI_TTY_ID; - ifx_dev->tty_dev = tty_register_device(tty_drv, ifx_dev->minor, - &ifx_dev->spi_dev->dev); - if (IS_ERR(ifx_dev->tty_dev)) { - dev_dbg(&ifx_dev->spi_dev->dev, - "%s: registering tty device failed", __func__); - ret = PTR_ERR(ifx_dev->tty_dev); - goto error_ret; - } - return 0; - -error_ret: - ifx_spi_free_port(ifx_dev); - return ret; -} - -/** - * ifx_spi_handle_srdy - handle SRDY - * @ifx_dev: device asserting SRDY - * - * Check our device state and see what we need to kick off when SRDY - * is asserted. This usually means killing the timer and firing off the - * I/O processing. - */ -static void ifx_spi_handle_srdy(struct ifx_spi_device *ifx_dev) -{ - if (test_bit(IFX_SPI_STATE_TIMER_PENDING, &ifx_dev->flags)) { - del_timer_sync(&ifx_dev->spi_timer); - clear_bit(IFX_SPI_STATE_TIMER_PENDING, &ifx_dev->flags); - } - - ifx_spi_power_state_set(ifx_dev, IFX_SPI_POWER_SRDY); - - if (!test_bit(IFX_SPI_STATE_IO_IN_PROGRESS, &ifx_dev->flags)) - tasklet_schedule(&ifx_dev->io_work_tasklet); - else - set_bit(IFX_SPI_STATE_IO_READY, &ifx_dev->flags); -} - -/** - * ifx_spi_srdy_interrupt - SRDY asserted - * @irq: our IRQ number - * @dev: our ifx device - * - * The modem asserted SRDY. Handle the srdy event - */ -static irqreturn_t ifx_spi_srdy_interrupt(int irq, void *dev) -{ - struct ifx_spi_device *ifx_dev = dev; - ifx_dev->gpio.unack_srdy_int_nb++; - ifx_spi_handle_srdy(ifx_dev); - return IRQ_HANDLED; -} - -/** - * ifx_spi_reset_interrupt - Modem has changed reset state - * @irq: interrupt number - * @dev: our device pointer - * - * The modem has either entered or left reset state. Check the GPIO - * line to see which. - * - * FIXME: review locking on MR_INPROGRESS versus - * parallel unsolicited reset/solicited reset - */ -static irqreturn_t ifx_spi_reset_interrupt(int irq, void *dev) -{ - struct ifx_spi_device *ifx_dev = dev; - int val = gpio_get_value(ifx_dev->gpio.reset_out); - int solreset = test_bit(MR_START, &ifx_dev->mdm_reset_state); - - if (val == 0) { - /* entered reset */ - set_bit(MR_INPROGRESS, &ifx_dev->mdm_reset_state); - if (!solreset) { - /* unsolicited reset */ - ifx_spi_ttyhangup(ifx_dev); - } - } else { - /* exited reset */ - clear_bit(MR_INPROGRESS, &ifx_dev->mdm_reset_state); - if (solreset) { - set_bit(MR_COMPLETE, &ifx_dev->mdm_reset_state); - wake_up(&ifx_dev->mdm_reset_wait); - } - } - return IRQ_HANDLED; -} - -/** - * ifx_spi_free_device - free device - * @ifx_dev: device to free - * - * Free the IFX device - */ -static void ifx_spi_free_device(struct ifx_spi_device *ifx_dev) -{ - ifx_spi_free_port(ifx_dev); - dma_free_coherent(&ifx_dev->spi_dev->dev, - IFX_SPI_TRANSFER_SIZE, - ifx_dev->tx_buffer, - ifx_dev->tx_bus); - dma_free_coherent(&ifx_dev->spi_dev->dev, - IFX_SPI_TRANSFER_SIZE, - ifx_dev->rx_buffer, - ifx_dev->rx_bus); -} - -/** - * ifx_spi_reset - reset modem - * @ifx_dev: modem to reset - * - * Perform a reset on the modem - */ -static int ifx_spi_reset(struct ifx_spi_device *ifx_dev) -{ - int ret; - /* - * set up modem power, reset - * - * delays are required on some platforms for the modem - * to reset properly - */ - set_bit(MR_START, &ifx_dev->mdm_reset_state); - gpio_set_value(ifx_dev->gpio.po, 0); - gpio_set_value(ifx_dev->gpio.reset, 0); - msleep(25); - gpio_set_value(ifx_dev->gpio.reset, 1); - msleep(1); - gpio_set_value(ifx_dev->gpio.po, 1); - msleep(1); - gpio_set_value(ifx_dev->gpio.po, 0); - ret = wait_event_timeout(ifx_dev->mdm_reset_wait, - test_bit(MR_COMPLETE, - &ifx_dev->mdm_reset_state), - IFX_RESET_TIMEOUT); - if (!ret) - dev_warn(&ifx_dev->spi_dev->dev, "Modem reset timeout: (state:%lx)", - ifx_dev->mdm_reset_state); - - ifx_dev->mdm_reset_state = 0; - return ret; -} - -/** - * ifx_spi_spi_probe - probe callback - * @spi: our possible matching SPI device - * - * Probe for a 6x60 modem on SPI bus. Perform any needed device and - * GPIO setup. - * - * FIXME: - * - Support for multiple devices - * - Split out MID specific GPIO handling eventually - */ - -static int ifx_spi_spi_probe(struct spi_device *spi) -{ - int ret; - int srdy; - struct ifx_modem_platform_data *pl_data = NULL; - struct ifx_spi_device *ifx_dev; - - if (saved_ifx_dev) { - dev_dbg(&spi->dev, "ignoring subsequent detection"); - return -ENODEV; - } - - /* initialize structure to hold our device variables */ - ifx_dev = kzalloc(sizeof(struct ifx_spi_device), GFP_KERNEL); - if (!ifx_dev) { - dev_err(&spi->dev, "spi device allocation failed"); - return -ENOMEM; - } - saved_ifx_dev = ifx_dev; - ifx_dev->spi_dev = spi; - clear_bit(IFX_SPI_STATE_IO_IN_PROGRESS, &ifx_dev->flags); - spin_lock_init(&ifx_dev->write_lock); - spin_lock_init(&ifx_dev->power_lock); - ifx_dev->power_status = 0; - init_timer(&ifx_dev->spi_timer); - ifx_dev->spi_timer.function = ifx_spi_timeout; - ifx_dev->spi_timer.data = (unsigned long)ifx_dev; - ifx_dev->is_6160 = pl_data->is_6160; - - /* ensure SPI protocol flags are initialized to enable transfer */ - ifx_dev->spi_more = 0; - ifx_dev->spi_slave_cts = 0; - - /*initialize transfer and dma buffers */ - ifx_dev->tx_buffer = dma_alloc_coherent(&ifx_dev->spi_dev->dev, - IFX_SPI_TRANSFER_SIZE, - &ifx_dev->tx_bus, - GFP_KERNEL); - if (!ifx_dev->tx_buffer) { - dev_err(&spi->dev, "DMA-TX buffer allocation failed"); - ret = -ENOMEM; - goto error_ret; - } - ifx_dev->rx_buffer = dma_alloc_coherent(&ifx_dev->spi_dev->dev, - IFX_SPI_TRANSFER_SIZE, - &ifx_dev->rx_bus, - GFP_KERNEL); - if (!ifx_dev->rx_buffer) { - dev_err(&spi->dev, "DMA-RX buffer allocation failed"); - ret = -ENOMEM; - goto error_ret; - } - - /* initialize waitq for modem reset */ - init_waitqueue_head(&ifx_dev->mdm_reset_wait); - - spi_set_drvdata(spi, ifx_dev); - tasklet_init(&ifx_dev->io_work_tasklet, ifx_spi_io, - (unsigned long)ifx_dev); - - set_bit(IFX_SPI_STATE_PRESENT, &ifx_dev->flags); - - /* create our tty port */ - ret = ifx_spi_create_port(ifx_dev); - if (ret != 0) { - dev_err(&spi->dev, "create default tty port failed"); - goto error_ret; - } - - pl_data = (struct ifx_modem_platform_data *)spi->dev.platform_data; - if (pl_data) { - ifx_dev->gpio.reset = pl_data->rst_pmu; - ifx_dev->gpio.po = pl_data->pwr_on; - ifx_dev->gpio.mrdy = pl_data->mrdy; - ifx_dev->gpio.srdy = pl_data->srdy; - ifx_dev->gpio.reset_out = pl_data->rst_out; - } else { - dev_err(&spi->dev, "missing platform data!"); - ret = -ENODEV; - goto error_ret; - } - - dev_info(&spi->dev, "gpios %d, %d, %d, %d, %d", - ifx_dev->gpio.reset, ifx_dev->gpio.po, ifx_dev->gpio.mrdy, - ifx_dev->gpio.srdy, ifx_dev->gpio.reset_out); - - /* Configure gpios */ - ret = gpio_request(ifx_dev->gpio.reset, "ifxModem"); - if (ret < 0) { - dev_err(&spi->dev, "Unable to allocate GPIO%d (RESET)", - ifx_dev->gpio.reset); - goto error_ret; - } - ret += gpio_direction_output(ifx_dev->gpio.reset, 0); - ret += gpio_export(ifx_dev->gpio.reset, 1); - if (ret) { - dev_err(&spi->dev, "Unable to configure GPIO%d (RESET)", - ifx_dev->gpio.reset); - ret = -EBUSY; - goto error_ret2; - } - - ret = gpio_request(ifx_dev->gpio.po, "ifxModem"); - ret += gpio_direction_output(ifx_dev->gpio.po, 0); - ret += gpio_export(ifx_dev->gpio.po, 1); - if (ret) { - dev_err(&spi->dev, "Unable to configure GPIO%d (ON)", - ifx_dev->gpio.po); - ret = -EBUSY; - goto error_ret3; - } - - ret = gpio_request(ifx_dev->gpio.mrdy, "ifxModem"); - if (ret < 0) { - dev_err(&spi->dev, "Unable to allocate GPIO%d (MRDY)", - ifx_dev->gpio.mrdy); - goto error_ret3; - } - ret += gpio_export(ifx_dev->gpio.mrdy, 1); - ret += gpio_direction_output(ifx_dev->gpio.mrdy, 0); - if (ret) { - dev_err(&spi->dev, "Unable to configure GPIO%d (MRDY)", - ifx_dev->gpio.mrdy); - ret = -EBUSY; - goto error_ret4; - } - - ret = gpio_request(ifx_dev->gpio.srdy, "ifxModem"); - if (ret < 0) { - dev_err(&spi->dev, "Unable to allocate GPIO%d (SRDY)", - ifx_dev->gpio.srdy); - ret = -EBUSY; - goto error_ret4; - } - ret += gpio_export(ifx_dev->gpio.srdy, 1); - ret += gpio_direction_input(ifx_dev->gpio.srdy); - if (ret) { - dev_err(&spi->dev, "Unable to configure GPIO%d (SRDY)", - ifx_dev->gpio.srdy); - ret = -EBUSY; - goto error_ret5; - } - - ret = gpio_request(ifx_dev->gpio.reset_out, "ifxModem"); - if (ret < 0) { - dev_err(&spi->dev, "Unable to allocate GPIO%d (RESET_OUT)", - ifx_dev->gpio.reset_out); - goto error_ret5; - } - ret += gpio_export(ifx_dev->gpio.reset_out, 1); - ret += gpio_direction_input(ifx_dev->gpio.reset_out); - if (ret) { - dev_err(&spi->dev, "Unable to configure GPIO%d (RESET_OUT)", - ifx_dev->gpio.reset_out); - ret = -EBUSY; - goto error_ret6; - } - - ret = request_irq(gpio_to_irq(ifx_dev->gpio.reset_out), - ifx_spi_reset_interrupt, - IRQF_TRIGGER_RISING|IRQF_TRIGGER_FALLING, DRVNAME, - (void *)ifx_dev); - if (ret) { - dev_err(&spi->dev, "Unable to get irq %x\n", - gpio_to_irq(ifx_dev->gpio.reset_out)); - goto error_ret6; - } - - ret = ifx_spi_reset(ifx_dev); - - ret = request_irq(gpio_to_irq(ifx_dev->gpio.srdy), - ifx_spi_srdy_interrupt, - IRQF_TRIGGER_RISING, DRVNAME, - (void *)ifx_dev); - if (ret) { - dev_err(&spi->dev, "Unable to get irq %x", - gpio_to_irq(ifx_dev->gpio.srdy)); - goto error_ret7; - } - - /* set pm runtime power state and register with power system */ - pm_runtime_set_active(&spi->dev); - pm_runtime_enable(&spi->dev); - - /* handle case that modem is already signaling SRDY */ - /* no outgoing tty open at this point, this just satisfies the - * modem's read and should reset communication properly - */ - srdy = gpio_get_value(ifx_dev->gpio.srdy); - - if (srdy) { - mrdy_assert(ifx_dev); - ifx_spi_handle_srdy(ifx_dev); - } else - mrdy_set_low(ifx_dev); - return 0; - -error_ret7: - free_irq(gpio_to_irq(ifx_dev->gpio.reset_out), (void *)ifx_dev); -error_ret6: - gpio_free(ifx_dev->gpio.srdy); -error_ret5: - gpio_free(ifx_dev->gpio.mrdy); -error_ret4: - gpio_free(ifx_dev->gpio.reset); -error_ret3: - gpio_free(ifx_dev->gpio.po); -error_ret2: - gpio_free(ifx_dev->gpio.reset_out); -error_ret: - ifx_spi_free_device(ifx_dev); - saved_ifx_dev = NULL; - return ret; -} - -/** - * ifx_spi_spi_remove - SPI device was removed - * @spi: SPI device - * - * FIXME: We should be shutting the device down here not in - * the module unload path. - */ - -static int ifx_spi_spi_remove(struct spi_device *spi) -{ - struct ifx_spi_device *ifx_dev = spi_get_drvdata(spi); - /* stop activity */ - tasklet_kill(&ifx_dev->io_work_tasklet); - /* free irq */ - free_irq(gpio_to_irq(ifx_dev->gpio.reset_out), (void *)ifx_dev); - free_irq(gpio_to_irq(ifx_dev->gpio.srdy), (void *)ifx_dev); - - gpio_free(ifx_dev->gpio.srdy); - gpio_free(ifx_dev->gpio.mrdy); - gpio_free(ifx_dev->gpio.reset); - gpio_free(ifx_dev->gpio.po); - gpio_free(ifx_dev->gpio.reset_out); - - /* free allocations */ - ifx_spi_free_device(ifx_dev); - - saved_ifx_dev = NULL; - return 0; -} - -/** - * ifx_spi_spi_shutdown - called on SPI shutdown - * @spi: SPI device - * - * No action needs to be taken here - */ - -static void ifx_spi_spi_shutdown(struct spi_device *spi) -{ -} - -/* - * various suspends and resumes have nothing to do - * no hardware to save state for - */ - -/** - * ifx_spi_spi_suspend - suspend SPI on system suspend - * @dev: device being suspended - * - * Suspend the SPI side. No action needed on Intel MID platforms, may - * need extending for other systems. - */ -static int ifx_spi_spi_suspend(struct spi_device *spi, pm_message_t msg) -{ - return 0; -} - -/** - * ifx_spi_spi_resume - resume SPI side on system resume - * @dev: device being suspended - * - * Suspend the SPI side. No action needed on Intel MID platforms, may - * need extending for other systems. - */ -static int ifx_spi_spi_resume(struct spi_device *spi) -{ - return 0; -} - -/** - * ifx_spi_pm_suspend - suspend modem on system suspend - * @dev: device being suspended - * - * Suspend the modem. No action needed on Intel MID platforms, may - * need extending for other systems. - */ -static int ifx_spi_pm_suspend(struct device *dev) -{ - return 0; -} - -/** - * ifx_spi_pm_resume - resume modem on system resume - * @dev: device being suspended - * - * Allow the modem to resume. No action needed. - * - * FIXME: do we need to reset anything here ? - */ -static int ifx_spi_pm_resume(struct device *dev) -{ - return 0; -} - -/** - * ifx_spi_pm_runtime_resume - suspend modem - * @dev: device being suspended - * - * Allow the modem to resume. No action needed. - */ -static int ifx_spi_pm_runtime_resume(struct device *dev) -{ - return 0; -} - -/** - * ifx_spi_pm_runtime_suspend - suspend modem - * @dev: device being suspended - * - * Allow the modem to suspend and thus suspend to continue up the - * device tree. - */ -static int ifx_spi_pm_runtime_suspend(struct device *dev) -{ - return 0; -} - -/** - * ifx_spi_pm_runtime_idle - check if modem idle - * @dev: our device - * - * Check conditions and queue runtime suspend if idle. - */ -static int ifx_spi_pm_runtime_idle(struct device *dev) -{ - struct spi_device *spi = to_spi_device(dev); - struct ifx_spi_device *ifx_dev = spi_get_drvdata(spi); - - if (!ifx_dev->power_status) - pm_runtime_suspend(dev); - - return 0; -} - -static const struct dev_pm_ops ifx_spi_pm = { - .resume = ifx_spi_pm_resume, - .suspend = ifx_spi_pm_suspend, - .runtime_resume = ifx_spi_pm_runtime_resume, - .runtime_suspend = ifx_spi_pm_runtime_suspend, - .runtime_idle = ifx_spi_pm_runtime_idle -}; - -static const struct spi_device_id ifx_id_table[] = { - {"ifx6160", 0}, - {"ifx6260", 0}, - { } -}; -MODULE_DEVICE_TABLE(spi, ifx_id_table); - -/* spi operations */ -static const struct spi_driver ifx_spi_driver_6160 = { - .driver = { - .name = "ifx6160", - .bus = &spi_bus_type, - .pm = &ifx_spi_pm, - .owner = THIS_MODULE}, - .probe = ifx_spi_spi_probe, - .shutdown = ifx_spi_spi_shutdown, - .remove = __devexit_p(ifx_spi_spi_remove), - .suspend = ifx_spi_spi_suspend, - .resume = ifx_spi_spi_resume, - .id_table = ifx_id_table -}; - -/** - * ifx_spi_exit - module exit - * - * Unload the module. - */ - -static void __exit ifx_spi_exit(void) -{ - /* unregister */ - tty_unregister_driver(tty_drv); - spi_unregister_driver((void *)&ifx_spi_driver_6160); -} - -/** - * ifx_spi_init - module entry point - * - * Initialise the SPI and tty interfaces for the IFX SPI driver - * We need to initialize upper-edge spi driver after the tty - * driver because otherwise the spi probe will race - */ - -static int __init ifx_spi_init(void) -{ - int result; - - tty_drv = alloc_tty_driver(1); - if (!tty_drv) { - pr_err("%s: alloc_tty_driver failed", DRVNAME); - return -ENOMEM; - } - - tty_drv->magic = TTY_DRIVER_MAGIC; - tty_drv->owner = THIS_MODULE; - tty_drv->driver_name = DRVNAME; - tty_drv->name = TTYNAME; - tty_drv->minor_start = IFX_SPI_TTY_ID; - tty_drv->num = 1; - tty_drv->type = TTY_DRIVER_TYPE_SERIAL; - tty_drv->subtype = SERIAL_TYPE_NORMAL; - tty_drv->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; - tty_drv->init_termios = tty_std_termios; - - tty_set_operations(tty_drv, &ifx_spi_serial_ops); - - result = tty_register_driver(tty_drv); - if (result) { - pr_err("%s: tty_register_driver failed(%d)", - DRVNAME, result); - put_tty_driver(tty_drv); - return result; - } - - result = spi_register_driver((void *)&ifx_spi_driver_6160); - if (result) { - pr_err("%s: spi_register_driver failed(%d)", - DRVNAME, result); - tty_unregister_driver(tty_drv); - } - return result; -} - -module_init(ifx_spi_init); -module_exit(ifx_spi_exit); - -MODULE_AUTHOR("Intel"); -MODULE_DESCRIPTION("IFX6x60 spi driver"); -MODULE_LICENSE("GPL"); -MODULE_INFO(Version, "0.1-IFX6x60"); |