diff options
Diffstat (limited to 'drivers/serial/Kconfig')
| -rw-r--r-- | drivers/serial/Kconfig | 1598 |
1 files changed, 0 insertions, 1598 deletions
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig deleted file mode 100644 index c1df7676a73..00000000000 --- a/drivers/serial/Kconfig +++ /dev/null @@ -1,1598 +0,0 @@ -# -# Serial device configuration -# - -menu "Serial drivers" - depends on HAS_IOMEM - -# -# The new 8250/16550 serial drivers -config SERIAL_8250 - tristate "8250/16550 and compatible serial support" - select SERIAL_CORE - ---help--- - This selects whether you want to include the driver for the standard - serial ports. The standard answer is Y. People who might say N - here are those that are setting up dedicated Ethernet WWW/FTP - servers, or users that have one of the various bus mice instead of a - serial mouse and don't intend to use their machine's standard serial - port for anything. (Note that the Cyclades and Stallion multi - serial port drivers do not need this driver built in for them to - work.) - - To compile this driver as a module, choose M here: the - module will be called 8250. - [WARNING: Do not compile this driver as a module if you are using - non-standard serial ports, since the configuration information will - be lost when the driver is unloaded. This limitation may be lifted - in the future.] - - BTW1: If you have a mouseman serial mouse which is not recognized by - the X window system, try running gpm first. - - BTW2: If you intend to use a software modem (also called Winmodem) - under Linux, forget it. These modems are crippled and require - proprietary drivers which are only available under Windows. - - Most people will say Y or M here, so that they can use serial mice, - modems and similar devices connecting to the standard serial ports. - -config SERIAL_8250_CONSOLE - bool "Console on 8250/16550 and compatible serial port" - depends on SERIAL_8250=y - select SERIAL_CORE_CONSOLE - ---help--- - If you say Y here, it will be possible to use a serial port as the - system console (the system console is the device which receives all - kernel messages and warnings and which allows logins in single user - mode). This could be useful if some terminal or printer is connected - to that serial port. - - Even if you say Y here, the currently visible virtual console - (/dev/tty0) will still be used as the system console by default, but - you can alter that using a kernel command line option such as - "console=ttyS1". (Try "man bootparam" or see the documentation of - your boot loader (grub or lilo or loadlin) about how to pass options - to the kernel at boot time.) - - If you don't have a VGA card installed and you say Y here, the - kernel will automatically use the first serial line, /dev/ttyS0, as - system console. - - You can set that using a kernel command line option such as - "console=uart8250,io,0x3f8,9600n8" - "console=uart8250,mmio,0xff5e0000,115200n8". - and it will switch to normal serial console when the corresponding - port is ready. - "earlycon=uart8250,io,0x3f8,9600n8" - "earlycon=uart8250,mmio,0xff5e0000,115200n8". - it will not only setup early console. - - If unsure, say N. - -config FIX_EARLYCON_MEM - bool - depends on X86 - default y - -config SERIAL_8250_GSC - tristate - depends on SERIAL_8250 && GSC - default SERIAL_8250 - -config SERIAL_8250_PCI - tristate "8250/16550 PCI device support" if EMBEDDED - depends on SERIAL_8250 && PCI - default SERIAL_8250 - help - This builds standard PCI serial support. You may be able to - disable this feature if you only need legacy serial support. - Saves about 9K. - -config SERIAL_8250_PNP - tristate "8250/16550 PNP device support" if EMBEDDED - depends on SERIAL_8250 && PNP - default SERIAL_8250 - help - This builds standard PNP serial support. You may be able to - disable this feature if you only need legacy serial support. - -config SERIAL_8250_HP300 - tristate - depends on SERIAL_8250 && HP300 - default SERIAL_8250 - -config SERIAL_8250_CS - tristate "8250/16550 PCMCIA device support" - depends on PCMCIA && SERIAL_8250 - ---help--- - Say Y here to enable support for 16-bit PCMCIA serial devices, - including serial port cards, modems, and the modem functions of - multi-function Ethernet/modem cards. (PCMCIA- or PC-cards are - credit-card size devices often used with laptops.) - - To compile this driver as a module, choose M here: the - module will be called serial_cs. - - If unsure, say N. - -config SERIAL_8250_NR_UARTS - int "Maximum number of 8250/16550 serial ports" - depends on SERIAL_8250 - default "4" - help - Set this to the number of serial ports you want the driver - to support. This includes any ports discovered via ACPI or - PCI enumeration and any ports that may be added at run-time - via hot-plug, or any ISA multi-port serial cards. - -config SERIAL_8250_RUNTIME_UARTS - int "Number of 8250/16550 serial ports to register at runtime" - depends on SERIAL_8250 - range 0 SERIAL_8250_NR_UARTS - default "4" - help - Set this to the maximum number of serial ports you want - the kernel to register at boot time. This can be overridden - with the module parameter "nr_uarts", or boot-time parameter - 8250.nr_uarts - -config SERIAL_8250_EXTENDED - bool "Extended 8250/16550 serial driver options" - depends on SERIAL_8250 - help - If you wish to use any non-standard features of the standard "dumb" - driver, say Y here. This includes HUB6 support, shared serial - interrupts, special multiport support, support for more than the - four COM 1/2/3/4 boards, etc. - - Note that the answer to this question won't directly affect the - kernel: saying N will just cause the configurator to skip all - the questions about serial driver options. If unsure, say N. - -config SERIAL_8250_MANY_PORTS - bool "Support more than 4 legacy serial ports" - depends on SERIAL_8250_EXTENDED && !IA64 - help - Say Y here if you have dumb serial boards other than the four - standard COM 1/2/3/4 ports. This may happen if you have an AST - FourPort, Accent Async, Boca (read the Boca mini-HOWTO, available - from <http://www.tldp.org/docs.html#howto>), or other custom - serial port hardware which acts similar to standard serial port - hardware. If you only use the standard COM 1/2/3/4 ports, you can - say N here to save some memory. You can also say Y if you have an - "intelligent" multiport card such as Cyclades, Digiboards, etc. - -# -# Multi-port serial cards -# - -config SERIAL_8250_FOURPORT - tristate "Support Fourport cards" - depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS - help - Say Y here if you have an AST FourPort serial board. - - To compile this driver as a module, choose M here: the module - will be called 8250_fourport. - -config SERIAL_8250_ACCENT - tristate "Support Accent cards" - depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS - help - Say Y here if you have an Accent Async serial board. - - To compile this driver as a module, choose M here: the module - will be called 8250_accent. - -config SERIAL_8250_BOCA - tristate "Support Boca cards" - depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS - help - Say Y here if you have a Boca serial board. Please read the Boca - mini-HOWTO, available from <http://www.tldp.org/docs.html#howto> - - To compile this driver as a module, choose M here: the module - will be called 8250_boca. - -config SERIAL_8250_EXAR_ST16C554 - tristate "Support Exar ST16C554/554D Quad UART" - depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS - help - The Uplogix Envoy TU301 uses this Exar Quad UART. If you are - tinkering with your Envoy TU301, or have a machine with this UART, - say Y here. - - To compile this driver as a module, choose M here: the module - will be called 8250_exar_st16c554. - -config SERIAL_8250_HUB6 - tristate "Support Hub6 cards" - depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS - help - Say Y here if you have a HUB6 serial board. - - To compile this driver as a module, choose M here: the module - will be called 8250_hub6. - -config SERIAL_8250_SHARE_IRQ - bool "Support for sharing serial interrupts" - depends on SERIAL_8250_EXTENDED - help - Some serial boards have hardware support which allows multiple dumb - serial ports on the same board to share a single IRQ. To enable - support for this in the serial driver, say Y here. - -config SERIAL_8250_DETECT_IRQ - bool "Autodetect IRQ on standard ports (unsafe)" - depends on SERIAL_8250_EXTENDED - help - Say Y here if you want the kernel to try to guess which IRQ - to use for your serial port. - - This is considered unsafe; it is far better to configure the IRQ in - a boot script using the setserial command. - - If unsure, say N. - -config SERIAL_8250_RSA - bool "Support RSA serial ports" - depends on SERIAL_8250_EXTENDED - help - ::: To be written ::: - -config SERIAL_8250_MCA - tristate "Support 8250-type ports on MCA buses" - depends on SERIAL_8250 != n && MCA - help - Say Y here if you have a MCA serial ports. - - To compile this driver as a module, choose M here: the module - will be called 8250_mca. - -config SERIAL_8250_ACORN - tristate "Acorn expansion card serial port support" - depends on ARCH_ACORN && SERIAL_8250 - help - If you have an Atomwide Serial card or Serial Port card for an Acorn - system, say Y to this option. The driver can handle 1, 2, or 3 port - cards. If unsure, say N. - -config SERIAL_8250_RM9K - bool "Support for MIPS RM9xxx integrated serial port" - depends on SERIAL_8250 != n && SERIAL_RM9000 - select SERIAL_8250_SHARE_IRQ - help - Selecting this option will add support for the integrated serial - port hardware found on MIPS RM9122 and similar processors. - If unsure, say N. - -comment "Non-8250 serial port support" - -config SERIAL_AMBA_PL010 - tristate "ARM AMBA PL010 serial port support" - depends on ARM_AMBA && (BROKEN || !ARCH_VERSATILE) - select SERIAL_CORE - help - This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have - an Integrator/AP or Integrator/PP2 platform, or if you have a - Cirrus Logic EP93xx CPU, say Y or M here. - - If unsure, say N. - -config SERIAL_AMBA_PL010_CONSOLE - bool "Support for console on AMBA serial port" - depends on SERIAL_AMBA_PL010=y - select SERIAL_CORE_CONSOLE - ---help--- - Say Y here if you wish to use an AMBA PrimeCell UART as the system - console (the system console is the device which receives all kernel - messages and warnings and which allows logins in single user mode). - - Even if you say Y here, the currently visible framebuffer console - (/dev/tty0) will still be used as the system console by default, but - you can alter that using a kernel command line option such as - "console=ttyAM0". (Try "man bootparam" or see the documentation of - your boot loader (lilo or loadlin) about how to pass options to the - kernel at boot time.) - -config SERIAL_AMBA_PL011 - tristate "ARM AMBA PL011 serial port support" - depends on ARM_AMBA - select SERIAL_CORE - help - This selects the ARM(R) AMBA(R) PrimeCell PL011 UART. If you have - an Integrator/PP2, Integrator/CP or Versatile platform, say Y or M - here. - - If unsure, say N. - -config SERIAL_AMBA_PL011_CONSOLE - bool "Support for console on AMBA serial port" - depends on SERIAL_AMBA_PL011=y - select SERIAL_CORE_CONSOLE - ---help--- - Say Y here if you wish to use an AMBA PrimeCell UART as the system - console (the system console is the device which receives all kernel - messages and warnings and which allows logins in single user mode). - - Even if you say Y here, the currently visible framebuffer console - (/dev/tty0) will still be used as the system console by default, but - you can alter that using a kernel command line option such as - "console=ttyAMA0". (Try "man bootparam" or see the documentation of - your boot loader (lilo or loadlin) about how to pass options to the - kernel at boot time.) - -config SERIAL_SB1250_DUART - tristate "BCM1xxx on-chip DUART serial support" - depends on SIBYTE_SB1xxx_SOC=y - select SERIAL_CORE - default y - ---help--- - Support for the asynchronous serial interface (DUART) included in - the BCM1250 and derived System-On-a-Chip (SOC) devices. Note that - the letter D in DUART stands for "dual", which is how the device - is implemented. Depending on the SOC configuration there may be - one or more DUARTs available of which all are handled. - - If unsure, say Y. To compile this driver as a module, choose M here: - the module will be called sb1250-duart. - -config SERIAL_SB1250_DUART_CONSOLE - bool "Support for console on a BCM1xxx DUART serial port" - depends on SERIAL_SB1250_DUART=y - select SERIAL_CORE_CONSOLE - default y - ---help--- - If you say Y here, it will be possible to use a serial port as the - system console (the system console is the device which receives all - kernel messages and warnings and which allows logins in single user - mode). - - If unsure, say Y. - -config SERIAL_ATMEL - bool "AT91 / AT32 on-chip serial port support" - depends on (ARM && ARCH_AT91) || AVR32 - select SERIAL_CORE - help - This enables the driver for the on-chip UARTs of the Atmel - AT91 and AT32 processors. - -config SERIAL_ATMEL_CONSOLE - bool "Support for console on AT91 / AT32 serial port" - depends on SERIAL_ATMEL=y - select SERIAL_CORE_CONSOLE - help - Say Y here if you wish to use an on-chip UART on a Atmel - AT91 or AT32 processor as the system console (the system - console is the device which receives all kernel messages and - warnings and which allows logins in single user mode). - -config SERIAL_ATMEL_PDC - bool "Support DMA transfers on AT91 / AT32 serial port" - depends on SERIAL_ATMEL - default y - help - Say Y here if you wish to use the PDC to do DMA transfers to - and from the Atmel AT91 / AT32 serial port. In order to - actually use DMA transfers, make sure that the use_dma_tx - and use_dma_rx members in the atmel_uart_data struct is set - appropriately for each port. - - Note that break and error handling currently doesn't work - properly when DMA is enabled. Make sure that ports where - this matters don't use DMA. - -config SERIAL_ATMEL_TTYAT - bool "Install as device ttyATn instead of ttySn" - depends on SERIAL_ATMEL=y - help - Say Y here if you wish to have the internal AT91 / AT32 UARTs - appear as /dev/ttyATn (major 204, minor starting at 154) - instead of the normal /dev/ttySn (major 4, minor starting at - 64). This is necessary if you also want other UARTs, such as - external 8250/16C550 compatible UARTs. - The ttySn nodes are legally reserved for the 8250 serial driver - but are often misused by other serial drivers. - - To use this, you should create suitable ttyATn device nodes in - /dev/, and pass "console=ttyATn" to the kernel. - - Say Y if you have an external 8250/16C550 UART. If unsure, say N. - -config SERIAL_KS8695 - bool "Micrel KS8695 (Centaur) serial port support" - depends on ARCH_KS8695 - select SERIAL_CORE - help - This selects the Micrel Centaur KS8695 UART. Say Y here. - -config SERIAL_KS8695_CONSOLE - bool "Support for console on KS8695 (Centaur) serial port" - depends on SERIAL_KS8695=y - select SERIAL_CORE_CONSOLE - help - Say Y here if you wish to use a KS8695 (Centaur) UART as the - system console (the system console is the device which - receives all kernel messages and warnings and which allows - logins in single user mode). - -config SERIAL_CLPS711X - tristate "CLPS711X serial port support" - depends on ARM && ARCH_CLPS711X - select SERIAL_CORE - help - ::: To be written ::: - -config SERIAL_CLPS711X_CONSOLE - bool "Support for console on CLPS711X serial port" - depends on SERIAL_CLPS711X=y - select SERIAL_CORE_CONSOLE - help - Even if you say Y here, the currently visible virtual console - (/dev/tty0) will still be used as the system console by default, but - you can alter that using a kernel command line option such as - "console=ttyCL1". (Try "man bootparam" or see the documentation of - your boot loader (lilo or loadlin) about how to pass options to the - kernel at boot time.) - -config SERIAL_SAMSUNG - tristate "Samsung SoC serial support" - depends on ARM && PLAT_SAMSUNG - select SERIAL_CORE - help - Support for the on-chip UARTs on the Samsung S3C24XX series CPUs, - providing /dev/ttySAC0, 1 and 2 (note, some machines may not - provide all of these ports, depending on how the serial port - pins are configured. - -config SERIAL_SAMSUNG_UARTS_4 - bool - depends on ARM && PLAT_SAMSUNG - default y if CPU_S3C2443 - help - Internal node for the common case of 4 Samsung compatible UARTs - -config SERIAL_SAMSUNG_UARTS - int - depends on ARM && PLAT_SAMSUNG - default 2 if ARCH_S3C2400 - default 6 if ARCH_S5P6450 - default 4 if SERIAL_SAMSUNG_UARTS_4 - default 3 - help - Select the number of available UART ports for the Samsung S3C - serial driver - -config SERIAL_SAMSUNG_DEBUG - bool "Samsung SoC serial debug" - depends on SERIAL_SAMSUNG && DEBUG_LL - help - Add support for debugging the serial driver. Since this is - generally being used as a console, we use our own output - routines that go via the low-level debug printascii() - function. - -config SERIAL_SAMSUNG_CONSOLE - bool "Support for console on Samsung SoC serial port" - depends on SERIAL_SAMSUNG=y - select SERIAL_CORE_CONSOLE - help - Allow selection of the S3C24XX on-board serial ports for use as - an virtual console. - - Even if you say Y here, the currently visible virtual console - (/dev/tty0) will still be used as the system console by default, but - you can alter that using a kernel command line option such as - "console=ttySACx". (Try "man bootparam" or see the documentation of - your boot loader about how to pass options to the kernel at - boot time.) - -config SERIAL_S3C2400 - tristate "Samsung S3C2410 Serial port support" - depends on ARM && SERIAL_SAMSUNG && CPU_S3C2400 - default y if CPU_S3C2400 - help - Serial port support for the Samsung S3C2400 SoC - -config SERIAL_S3C2410 - tristate "Samsung S3C2410 Serial port support" - depends on SERIAL_SAMSUNG && CPU_S3C2410 - default y if CPU_S3C2410 - help - Serial port support for the Samsung S3C2410 SoC - -config SERIAL_S3C2412 - tristate "Samsung S3C2412/S3C2413 Serial port support" - depends on SERIAL_SAMSUNG && CPU_S3C2412 - default y if CPU_S3C2412 - help - Serial port support for the Samsung S3C2412 and S3C2413 SoC - -config SERIAL_S3C2440 - tristate "Samsung S3C2440/S3C2442/S3C2416 Serial port support" - depends on SERIAL_SAMSUNG && (CPU_S3C2440 || CPU_S3C2442 || CPU_S3C2416) - default y if CPU_S3C2440 - default y if CPU_S3C2442 - select SERIAL_SAMSUNG_UARTS_4 if CPU_S3C2416 - help - Serial port support for the Samsung S3C2440, S3C2416 and S3C2442 SoC - -config SERIAL_S3C24A0 - tristate "Samsung S3C24A0 Serial port support" - depends on SERIAL_SAMSUNG && CPU_S3C24A0 - default y if CPU_S3C24A0 - help - Serial port support for the Samsung S3C24A0 SoC - -config SERIAL_S3C6400 - tristate "Samsung S3C6400/S3C6410/S5P6440/S5P6450/S5PC100 Serial port support" - depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 || CPU_S5P6440 || CPU_S5P6450 || CPU_S5PC100) - select SERIAL_SAMSUNG_UARTS_4 - default y - help - Serial port support for the Samsung S3C6400, S3C6410, S5P6440, S5P6450 - and S5PC100 SoCs - -config SERIAL_S5PV210 - tristate "Samsung S5PV210 Serial port support" - depends on SERIAL_SAMSUNG && (CPU_S5PV210 || CPU_S5P6442 || CPU_S5PV310) - select SERIAL_SAMSUNG_UARTS_4 if (CPU_S5PV210 || CPU_S5PV310) - default y - help - Serial port support for Samsung's S5P Family of SoC's - - -config SERIAL_MAX3100 - tristate "MAX3100 support" - depends on SPI - select SERIAL_CORE - help - MAX3100 chip support - -config SERIAL_MAX3107 - tristate "MAX3107 support" - depends on SPI - select SERIAL_CORE - help - MAX3107 chip support - -config SERIAL_MAX3107_AAVA - tristate "MAX3107 AAVA platform support" - depends on X86_MRST && SERIAL_MAX3107 && GPIOLIB - select SERIAL_CORE - help - Support for the MAX3107 chip configuration found on the AAVA - platform. Includes the extra initialisation and GPIO support - neded for this device. - -config SERIAL_DZ - bool "DECstation DZ serial driver" - depends on MACH_DECSTATION && 32BIT - select SERIAL_CORE - default y - ---help--- - DZ11-family serial controllers for DECstations and VAXstations, - including the DC7085, M7814, and M7819. - -config SERIAL_DZ_CONSOLE - bool "Support console on DECstation DZ serial driver" - depends on SERIAL_DZ=y - select SERIAL_CORE_CONSOLE - default y - ---help--- - If you say Y here, it will be possible to use a serial port as the - system console (the system console is the device which receives all - kernel messages and warnings and which allows logins in single user - mode). - - Note that the firmware uses ttyS3 as the serial console on - DECstations that use this driver. - - If unsure, say Y. - -config SERIAL_ZS - tristate "DECstation Z85C30 serial support" - depends on MACH_DECSTATION - select SERIAL_CORE - default y - ---help--- - Support for the Zilog 85C350 serial communications controller used - for serial ports in newer DECstation systems. These include the - DECsystem 5900 and all models of the DECstation and DECsystem 5000 - systems except from model 200. - - If unsure, say Y. To compile this driver as a module, choose M here: - the module will be called zs. - -config SERIAL_ZS_CONSOLE - bool "Support for console on a DECstation Z85C30 serial port" - depends on SERIAL_ZS=y - select SERIAL_CORE_CONSOLE - default y - ---help--- - If you say Y here, it will be possible to use a serial port as the - system console (the system console is the device which receives all - kernel messages and warnings and which allows logins in single user - mode). - - Note that the firmware uses ttyS1 as the serial console on the - Maxine and ttyS3 on the others using this driver. - - If unsure, say Y. - -config SERIAL_21285 - tristate "DC21285 serial port support" - depends on ARM && FOOTBRIDGE - select SERIAL_CORE - help - If you have a machine based on a 21285 (Footbridge) StrongARM(R)/ - PCI bridge you can enable its onboard serial port by enabling this - option. - -config SERIAL_21285_CONSOLE - bool "Console on DC21285 serial port" - depends on SERIAL_21285=y - select SERIAL_CORE_CONSOLE - help - If you have enabled the serial port on the 21285 footbridge you can - make it the console by answering Y to this option. - - Even if you say Y here, the currently visible virtual console - (/dev/tty0) will still be used as the system console by default, but - you can alter that using a kernel command line option such as - "console=ttyFB". (Try "man bootparam" or see the documentation of - your boot loader (lilo or loadlin) about how to pass options to the - kernel at boot time.) - -config SERIAL_MPSC - bool "Marvell MPSC serial port support" - depends on PPC32 && MV64X60 - select SERIAL_CORE - help - Say Y here if you want to use the Marvell MPSC serial controller. - -config SERIAL_MPSC_CONSOLE - bool "Support for console on Marvell MPSC serial port" - depends on SERIAL_MPSC - select SERIAL_CORE_CONSOLE - help - Say Y here if you want to support a serial console on a Marvell MPSC. - -config SERIAL_PXA - bool "PXA serial port support" - depends on ARCH_PXA || ARCH_MMP - select SERIAL_CORE - help - If you have a machine based on an Intel XScale PXA2xx CPU you - can enable its onboard serial ports by enabling this option. - -config SERIAL_PXA_CONSOLE - bool "Console on PXA serial port" - depends on SERIAL_PXA - select SERIAL_CORE_CONSOLE - help - If you have enabled the serial port on the Intel XScale PXA - CPU you can make it the console by answering Y to this option. - - Even if you say Y here, the currently visible virtual console - (/dev/tty0) will still be used as the system console by default, but - you can alter that using a kernel command line option such as - "console=ttySA0". (Try "man bootparam" or see the documentation of - your boot loader (lilo or loadlin) about how to pass options to the - kernel at boot time.) - -config SERIAL_SA1100 - bool "SA1100 serial port support" - depends on ARM && ARCH_SA1100 - select SERIAL_CORE - help - If you have a machine based on a SA1100/SA1110 StrongARM(R) CPU you - can enable its onboard serial port by enabling this option. - Please read <file:Documentation/arm/SA1100/serial_UART> for further - info. - -config SERIAL_SA1100_CONSOLE - bool "Console on SA1100 serial port" - depends on SERIAL_SA1100 - select SERIAL_CORE_CONSOLE - help - If you have enabled the serial port on the SA1100/SA1110 StrongARM - CPU you can make it the console by answering Y to this option. - - Even if you say Y here, the currently visible virtual console - (/dev/tty0) will still be used as the system console by default, but - you can alter that using a kernel command line option such as - "console=ttySA0". (Try "man bootparam" or see the documentation of - your boot loader (lilo or loadlin) about how to pass options to the - kernel at boot time.) - -config SERIAL_MRST_MAX3110 - tristate "SPI UART driver for Max3110" - depends on SPI_DW_PCI - select SERIAL_CORE - select SERIAL_CORE_CONSOLE - help - This is the UART protocol driver for the MAX3110 device on - the Intel Moorestown platform. On other systems use the max3100 - driver. - -config SERIAL_MFD_HSU - tristate "Medfield High Speed UART support" - depends on PCI - select SERIAL_CORE - -config SERIAL_MFD_HSU_CONSOLE - boolean "Medfile HSU serial console support" - depends on SERIAL_MFD_HSU=y - select SERIAL_CORE_CONSOLE - -config SERIAL_BFIN - tristate "Blackfin serial port support" - depends on BLACKFIN - select SERIAL_CORE - select SERIAL_BFIN_UART0 if (BF531 || BF532 || BF533 || BF561) - help - Add support for the built-in UARTs on the Blackfin. - - To compile this driver as a module, choose M here: the - module will be called bfin_5xx. - -config SERIAL_BFIN_CONSOLE - bool "Console on Blackfin serial port" - depends on SERIAL_BFIN=y - select SERIAL_CORE_CONSOLE - -choice - prompt "UART Mode" - depends on SERIAL_BFIN - default SERIAL_BFIN_DMA - help - This driver supports the built-in serial ports of the Blackfin family - of CPUs - -config SERIAL_BFIN_DMA - bool "DMA mode" - depends on !DMA_UNCACHED_NONE && KGDB_SERIAL_CONSOLE=n - help - This driver works under DMA mode. If this option is selected, the - blackfin simple dma driver is also enabled. - -config SERIAL_BFIN_PIO - bool "PIO mode" - help - This driver works under PIO mode. - -endchoice - -config SERIAL_BFIN_UART0 - bool "Enable UART0" - depends on SERIAL_BFIN - help - Enable UART0 - -config BFIN_UART0_CTSRTS - bool "Enable UART0 hardware flow control" - depends on SERIAL_BFIN_UART0 - help - Enable hardware flow control in the driver. - -config SERIAL_BFIN_UART1 - bool "Enable UART1" - depends on SERIAL_BFIN && (!BF531 && !BF532 && !BF533 && !BF561) - help - Enable UART1 - -config BFIN_UART1_CTSRTS - bool "Enable UART1 hardware flow control" - depends on SERIAL_BFIN_UART1 - help - Enable hardware flow control in the driver. - -config SERIAL_BFIN_UART2 - bool "Enable UART2" - depends on SERIAL_BFIN && (BF54x || BF538 || BF539) - help - Enable UART2 - -config BFIN_UART2_CTSRTS - bool "Enable UART2 hardware flow control" - depends on SERIAL_BFIN_UART2 - help - Enable hardware flow control in the driver. - -config SERIAL_BFIN_UART3 - bool "Enable UART3" - depends on SERIAL_BFIN && (BF54x) - help - Enable UART3 - -config BFIN_UART3_CTSRTS - bool "Enable UART3 hardware flow control" - depends on SERIAL_BFIN_UART3 - help - Enable hardware flow control in the driver. - -config SERIAL_IMX - bool "IMX serial port support" - depends on ARM && (ARCH_IMX || ARCH_MXC) - select SERIAL_CORE - select RATIONAL - help - If you have a machine based on a Motorola IMX CPU you - can enable its onboard serial port by enabling this option. - -config SERIAL_IMX_CONSOLE - bool "Console on IMX serial port" - depends on SERIAL_IMX - select SERIAL_CORE_CONSOLE - help - If you have enabled the serial port on the Motorola IMX - CPU you can make it the console by answering Y to this option. - - Even if you say Y here, the currently visible virtual console - (/dev/tty0) will still be used as the system console by default, but - you can alter that using a kernel command line option such as - "console=ttySA0". (Try "man bootparam" or see the documentation of - your boot loader (lilo or loadlin) about how to pass options to the - kernel at boot time.) - -config SERIAL_UARTLITE - tristate "Xilinx uartlite serial port support" - depends on PPC32 || MICROBLAZE || MFD_TIMBERDALE - select SERIAL_CORE - help - Say Y here if you want to use the Xilinx uartlite serial controller. - - To compile this driver as a module, choose M here: the - module will be called uartlite. - -config SERIAL_UARTLITE_CONSOLE - bool "Support for console on Xilinx uartlite serial port" - depends on SERIAL_UARTLITE=y - select SERIAL_CORE_CONSOLE - help - Say Y here if you wish to use a Xilinx uartlite as the system - console (the system console is the device which receives all kernel - messages and warnings and which allows logins in single user mode). - -config SERIAL_SUNCORE - bool - depends on SPARC - select SERIAL_CORE - select SERIAL_CORE_CONSOLE - default y - -config SERIAL_SUNZILOG - tristate "Sun Zilog8530 serial support" - depends on SPARC - help - This driver supports the Zilog8530 serial ports found on many Sparc - systems. Say Y or M if you want to be able to these serial ports. - -config SERIAL_SUNZILOG_CONSOLE - bool "Console on Sun Zilog8530 serial port" - depends on SERIAL_SUNZILOG=y - help - If you would like to be able to use the Zilog8530 serial port - on your Sparc system as the console, you can do so by answering - Y to this option. - -config SERIAL_SUNSU - tristate "Sun SU serial support" - depends on SPARC && PCI - help - This driver supports the 8250 serial ports that run the keyboard and - mouse on (PCI) UltraSPARC systems. Say Y or M if you want to be able - to these serial ports. - -config SERIAL_SUNSU_CONSOLE - bool "Console on Sun SU serial port" - depends on SERIAL_SUNSU=y - help - If you would like to be able to use the SU serial port - on your Sparc system as the console, you can do so by answering - Y to this option. - -config SERIAL_MUX - tristate "Serial MUX support" - depends on GSC - select SERIAL_CORE - default y - ---help--- - Saying Y here will enable the hardware MUX serial driver for - the Nova, K class systems and D class with a 'remote control card'. - The hardware MUX is not 8250/16550 compatible therefore the - /dev/ttyB0 device is shared between the Serial MUX and the PDC - software console. The following steps need to be completed to use - the Serial MUX: - - 1. create the device entry (mknod /dev/ttyB0 c 11 0) - 2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0 - 3. Add device ttyB0 to /etc/securetty (if you want to log on as - root on this console.) - 4. Change the kernel command console parameter to: console=ttyB0 - -config SERIAL_MUX_CONSOLE - bool "Support for console on serial MUX" - depends on SERIAL_MUX=y - select SERIAL_CORE_CONSOLE - default y - -config PDC_CONSOLE - bool "PDC software console support" - depends on PARISC && !SERIAL_MUX && VT - default n - help - Saying Y here will enable the software based PDC console to be - used as the system console. This is useful for machines in - which the hardware based console has not been written yet. The - following steps must be competed to use the PDC console: - - 1. create the device entry (mknod /dev/ttyB0 c 11 0) - 2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0 - 3. Add device ttyB0 to /etc/securetty (if you want to log on as - root on this console.) - 4. Change the kernel command console parameter to: console=ttyB0 - -config SERIAL_SUNSAB - tristate "Sun Siemens SAB82532 serial support" - depends on SPARC && PCI - help - This driver supports the Siemens SAB82532 DUSCC serial ports on newer - (PCI) UltraSPARC systems. Say Y or M if you want to be able to these - serial ports. - -config SERIAL_SUNSAB_CONSOLE - bool "Console on Sun Siemens SAB82532 serial port" - depends on SERIAL_SUNSAB=y - help - If you would like to be able to use the SAB82532 serial port - on your Sparc system as the console, you can do so by answering - Y to this option. - -config SERIAL_SUNHV - bool "Sun4v Hypervisor Console support" - depends on SPARC64 - help - This driver supports the console device found on SUN4V Sparc - systems. Say Y if you want to be able to use this device. - -config SERIAL_IP22_ZILOG - tristate "SGI Zilog8530 serial support" - depends on SGI_HAS_ZILOG - select SERIAL_CORE - help - This driver supports the Zilog8530 serial ports found on SGI - systems. Say Y or M if you want to be able to these serial ports. - -config SERIAL_IP22_ZILOG_CONSOLE - bool "Console on SGI Zilog8530 serial port" - depends on SERIAL_IP22_ZILOG=y - select SERIAL_CORE_CONSOLE - -config SERIAL_SH_SCI - tristate "SuperH SCI(F) serial port support" - depends on HAVE_CLK && (SUPERH || H8300 || ARCH_SHMOBILE) - select SERIAL_CORE - -config SERIAL_SH_SCI_NR_UARTS - int "Maximum number of SCI(F) serial ports" - depends on SERIAL_SH_SCI - default "2" - -config SERIAL_SH_SCI_CONSOLE - bool "Support for console on SuperH SCI(F)" - depends on SERIAL_SH_SCI=y - select SERIAL_CORE_CONSOLE - -config SERIAL_SH_SCI_DMA - bool "DMA support" - depends on SERIAL_SH_SCI && SH_DMAE && EXPERIMENTAL - -config SERIAL_PNX8XXX - bool "Enable PNX8XXX SoCs' UART Support" - depends on MIPS && (SOC_PNX8550 || SOC_PNX833X) - select SERIAL_CORE - help - If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330 - and you want to use serial ports, say Y. Otherwise, say N. - -config SERIAL_PNX8XXX_CONSOLE - bool "Enable PNX8XX0 serial console" - depends on SERIAL_PNX8XXX - select SERIAL_CORE_CONSOLE - help - If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330 - and you want to use serial console, say Y. Otherwise, say N. - -config SERIAL_CORE - tristate - -config SERIAL_CORE_CONSOLE - bool - -config CONSOLE_POLL - bool - -config SERIAL_68328 - bool "68328 serial support" - depends on M68328 || M68EZ328 || M68VZ328 - help - This driver supports the built-in serial port of the Motorola 68328 - (standard, EZ and VZ varieties). - -config SERIAL_68328_RTS_CTS - bool "Support RTS/CTS on 68328 serial port" - depends on SERIAL_68328 - -config SERIAL_MCF - bool "Coldfire serial support" - depends on COLDFIRE - select SERIAL_CORE - help - This serial driver supports the Freescale Coldfire serial ports. - -config SERIAL_MCF_BAUDRATE - int "Default baudrate for Coldfire serial ports" - depends on SERIAL_MCF - default 19200 - help - This setting lets you define what the default baudrate is for the - ColdFire serial ports. The usual default varies from board to board, - and this setting is a way of catering for that. - -config SERIAL_MCF_CONSOLE - bool "Coldfire serial console support" - depends on SERIAL_MCF - select SERIAL_CORE_CONSOLE - help - Enable a ColdFire internal serial port to be the system console. - -config SERIAL_68360_SMC - bool "68360 SMC uart support" - depends on M68360 - help - This driver supports the SMC serial ports of the Motorola 68360 CPU. - -config SERIAL_68360_SCC - bool "68360 SCC uart support" - depends on M68360 - help - This driver supports the SCC serial ports of the Motorola 68360 CPU. - -config SERIAL_68360 - bool - depends on SERIAL_68360_SMC || SERIAL_68360_SCC - default y - -config SERIAL_PMACZILOG - tristate "Mac or PowerMac z85c30 ESCC support" - depends on (M68K && MAC) || (PPC_OF && PPC_PMAC) - select SERIAL_CORE - help - This driver supports the Zilog z85C30 serial ports found on - (Power)Mac machines. - Say Y or M if you want to be able to these serial ports. - -config SERIAL_PMACZILOG_TTYS - bool "Use ttySn device nodes for Zilog z85c30" - depends on SERIAL_PMACZILOG - help - The pmac_zilog driver for the z85C30 chip on many powermacs - historically used the device numbers for /dev/ttySn. The - 8250 serial port driver also uses these numbers, which means - the two drivers being unable to coexist; you could not use - both z85C30 and 8250 type ports at the same time. - - If this option is not selected, the pmac_zilog driver will - use the device numbers allocated for /dev/ttyPZn. This allows - the pmac_zilog and 8250 drivers to co-exist, but may cause - existing userspace setups to break. Programs that need to - access the built-in serial ports on powermacs will need to - be reconfigured to use /dev/ttyPZn instead of /dev/ttySn. - - If you enable this option, any z85c30 ports in the system will - be registered as ttyS0 onwards as in the past, and you will be - unable to use the 8250 module for PCMCIA or other 16C550-style - UARTs. - - Say N unless you need the z85c30 ports on your (Power)Mac - to appear as /dev/ttySn. - -config SERIAL_PMACZILOG_CONSOLE - bool "Console on Mac or PowerMac z85c30 serial port" - depends on SERIAL_PMACZILOG=y - select SERIAL_CORE_CONSOLE - help - If you would like to be able to use the z85c30 serial port - on your (Power)Mac as the console, you can do so by answering - Y to this option. - -config SERIAL_LH7A40X - tristate "Sharp LH7A40X embedded UART support" - depends on ARM && ARCH_LH7A40X - select SERIAL_CORE - help - This enables support for the three on-board UARTs of the - Sharp LH7A40X series CPUs. Choose Y or M. - -config SERIAL_LH7A40X_CONSOLE - bool "Support for console on Sharp LH7A40X serial port" - depends on SERIAL_LH7A40X=y - select SERIAL_CORE_CONSOLE - help - Say Y here if you wish to use one of the serial ports as the - system console--the system console is the device which - receives all kernel messages and warnings and which allows - logins in single user mode. - - Even if you say Y here, the currently visible framebuffer console - (/dev/tty0) will still be used as the default system console, but - you can alter that using a kernel command line, for example - "console=ttyAM1". - -config SERIAL_CPM - tristate "CPM SCC/SMC serial port support" - depends on CPM2 || 8xx - select SERIAL_CORE - help - This driver supports the SCC and SMC serial ports on Motorola - embedded PowerPC that contain a CPM1 (8xx) or CPM2 (8xxx) - -config SERIAL_CPM_CONSOLE - bool "Support for console on CPM SCC/SMC serial port" - depends on SERIAL_CPM=y - select SERIAL_CORE_CONSOLE - help - Say Y here if you wish to use a SCC or SMC CPM UART as the system - console (the system console is the device which receives all kernel - messages and warnings and which allows logins in single user mode). - - Even if you say Y here, the currently visible framebuffer console - (/dev/tty0) will still be used as the system console by default, but - you can alter that using a kernel command line option such as - "console=ttyCPM0". (Try "man bootparam" or see the documentation of - your boot loader (lilo or loadlin) about how to pass options to the - kernel at boot time.) - -config SERIAL_SGI_L1_CONSOLE - bool "SGI Altix L1 serial console support" - depends on IA64_GENERIC || IA64_SGI_SN2 - select SERIAL_CORE - select SERIAL_CORE_CONSOLE - help - If you have an SGI Altix and you would like to use the system - controller serial port as your console (you want this!), - say Y. Otherwise, say N. - -config SERIAL_MPC52xx - tristate "Freescale MPC52xx/MPC512x family PSC serial support" - depends on PPC_MPC52xx || PPC_MPC512x - select SERIAL_CORE - help - This driver supports MPC52xx and MPC512x PSC serial ports. If you would - like to use them, you must answer Y or M to this option. Note that - for use as console, it must be included in kernel and not as a - module. - -config SERIAL_MPC52xx_CONSOLE - bool "Console on a Freescale MPC52xx/MPC512x family PSC serial port" - depends on SERIAL_MPC52xx=y - select SERIAL_CORE_CONSOLE - help - Select this options if you'd like to use one of the PSC serial port - of the Freescale MPC52xx family as a console. - -config SERIAL_MPC52xx_CONSOLE_BAUD - int "Freescale MPC52xx/MPC512x family PSC serial port baud" - depends on SERIAL_MPC52xx_CONSOLE=y - default "9600" - help - Select the MPC52xx console baud rate. - This value is only used if the bootloader doesn't pass in the - console baudrate - -config SERIAL_ICOM - tristate "IBM Multiport Serial Adapter" - depends on PCI && (PPC_ISERIES || PPC_PSERIES) - select SERIAL_CORE - select FW_LOADER - help - This driver is for a family of multiport serial adapters - including 2 port RVX, 2 port internal modem, 4 port internal - modem and a split 1 port RVX and 1 port internal modem. - - This driver can also be built as a module. If so, the module - will be called icom. - -config SERIAL_M32R_SIO - bool "M32R SIO I/F" - depends on M32R - default y - select SERIAL_CORE - help - Say Y here if you want to use the M32R serial controller. - -config SERIAL_M32R_SIO_CONSOLE - bool "use SIO console" - depends on SERIAL_M32R_SIO=y - select SERIAL_CORE_CONSOLE - help - Say Y here if you want to support a serial console. - - If you use an M3T-M32700UT or an OPSPUT platform, - please say also y for SERIAL_M32R_PLDSIO. - -config SERIAL_M32R_PLDSIO - bool "M32R SIO I/F on a PLD" - depends on SERIAL_M32R_SIO=y && (PLAT_OPSPUT || PLAT_USRV || PLAT_M32700UT) - default n - help - Say Y here if you want to use the M32R serial controller - on a PLD (Programmable Logic Device). - - If you use an M3T-M32700UT or an OPSPUT platform, - please say Y. - -config SERIAL_TXX9 - bool "TMPTX39XX/49XX SIO support" - depends on HAS_TXX9_SERIAL - select SERIAL_CORE - default y - -config HAS_TXX9_SERIAL - bool - -config SERIAL_TXX9_NR_UARTS - int "Maximum number of TMPTX39XX/49XX SIO ports" - depends on SERIAL_TXX9 - default "6" - -config SERIAL_TXX9_CONSOLE - bool "TMPTX39XX/49XX SIO Console support" - depends on SERIAL_TXX9=y - select SERIAL_CORE_CONSOLE - -config SERIAL_TXX9_STDSERIAL - bool "TX39XX/49XX SIO act as standard serial" - depends on !SERIAL_8250 && SERIAL_TXX9 - -config SERIAL_VR41XX - tristate "NEC VR4100 series Serial Interface Unit support" - depends on CPU_VR41XX - select SERIAL_CORE - help - If you have a NEC VR4100 series processor and you want to use - Serial Interface Unit(SIU) or Debug Serial Interface Unit(DSIU) - (not include VR4111/VR4121 DSIU), say Y. Otherwise, say N. - -config SERIAL_VR41XX_CONSOLE - bool "Enable NEC VR4100 series Serial Interface Unit console" - depends on SERIAL_VR41XX=y - select SERIAL_CORE_CONSOLE - help - If you have a NEC VR4100 series processor and you want to use - a console on a serial port, say Y. Otherwise, say N. - -config SERIAL_JSM - tristate "Digi International NEO PCI Support" - depends on PCI - select SERIAL_CORE - help - This is a driver for Digi International's Neo series - of cards which provide multiple serial ports. You would need - something like this to connect more than two modems to your Linux - box, for instance in order to become a dial-in server. This driver - supports PCI boards only. - - If you have a card like this, say Y here, otherwise say N. - - To compile this driver as a module, choose M here: the - module will be called jsm. - -config SERIAL_SGI_IOC4 - tristate "SGI IOC4 controller serial support" - depends on (IA64_GENERIC || IA64_SGI_SN2) && SGI_IOC4 - select SERIAL_CORE - help - If you have an SGI Altix with an IOC4 based Base IO card - and wish to use the serial ports on this card, say Y. - Otherwise, say N. - -config SERIAL_SGI_IOC3 - tristate "SGI Altix IOC3 serial support" - depends on (IA64_GENERIC || IA64_SGI_SN2) && SGI_IOC3 - select SERIAL_CORE - help - If you have an SGI Altix with an IOC3 serial card, - say Y or M. Otherwise, say N. - -config SERIAL_MSM - bool "MSM on-chip serial port support" - depends on ARM && ARCH_MSM - select SERIAL_CORE - -config SERIAL_MSM_CONSOLE - bool "MSM serial console support" - depends on SERIAL_MSM=y - select SERIAL_CORE_CONSOLE - -config SERIAL_VT8500 - bool "VIA VT8500 on-chip serial port support" - depends on ARM && ARCH_VT8500 - select SERIAL_CORE - -config SERIAL_VT8500_CONSOLE - bool "VIA VT8500 serial console support" - depends on SERIAL_VT8500=y - select SERIAL_CORE_CONSOLE - -config SERIAL_NETX - tristate "NetX serial port support" - depends on ARM && ARCH_NETX - select SERIAL_CORE - help - If you have a machine based on a Hilscher NetX SoC you - can enable its onboard serial port by enabling this option. - - To compile this driver as a module, choose M here: the - module will be called netx-serial. - -config SERIAL_NETX_CONSOLE - bool "Console on NetX serial port" - depends on SERIAL_NETX=y - select SERIAL_CORE_CONSOLE - help - If you have enabled the serial port on the Hilscher NetX SoC - you can make it the console by answering Y to this option. - -config SERIAL_OF_PLATFORM - tristate "Serial port on Open Firmware platform bus" - depends on OF - depends on SERIAL_8250 || SERIAL_OF_PLATFORM_NWPSERIAL - help - If you have a PowerPC based system that has serial ports - on a platform specific bus, you should enable this option. - Currently, only 8250 compatible ports are supported, but - others can easily be added. - -config SERIAL_OMAP - tristate "OMAP serial port support" - depends on ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4 - select SERIAL_CORE - help - If you have a machine based on an Texas Instruments OMAP CPU you - can enable its onboard serial ports by enabling this option. - - By enabling this option you take advantage of dma feature available - with the omap-serial driver. DMA support can be enabled from platform - data. - -config SERIAL_OMAP_CONSOLE - bool "Console on OMAP serial port" - depends on SERIAL_OMAP - select SERIAL_CORE_CONSOLE - help - Select this option if you would like to use omap serial port as - console. - - Even if you say Y here, the currently visible virtual console - (/dev/tty0) will still be used as the system console by default, but - you can alter that using a kernel command line option such as - "console=ttyOx". (Try "man bootparam" or see the documentation of - your boot loader about how to pass options to the kernel at - boot time.) - -config SERIAL_OF_PLATFORM_NWPSERIAL - tristate "NWP serial port driver" - depends on PPC_OF && PPC_DCR - select SERIAL_OF_PLATFORM - select SERIAL_CORE_CONSOLE - select SERIAL_CORE - help - This driver supports the cell network processor nwp serial - device. - -config SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE - bool "Console on NWP serial port" - depends on SERIAL_OF_PLATFORM_NWPSERIAL=y - select SERIAL_CORE_CONSOLE - help - Support for Console on the NWP serial ports. - -config SERIAL_QE - tristate "Freescale QUICC Engine serial port support" - depends on QUICC_ENGINE - select SERIAL_CORE - select FW_LOADER - default n - help - This driver supports the QE serial ports on Freescale embedded - PowerPC that contain a QUICC Engine. - -config SERIAL_SC26XX - tristate "SC2681/SC2692 serial port support" - depends on SNI_RM - select SERIAL_CORE - help - This is a driver for the onboard serial ports of - older RM400 machines. - -config SERIAL_SC26XX_CONSOLE - bool "Console on SC2681/SC2692 serial port" - depends on SERIAL_SC26XX - select SERIAL_CORE_CONSOLE - help - Support for Console on SC2681/SC2692 serial ports. - -config SERIAL_BFIN_SPORT - tristate "Blackfin SPORT emulate UART" - depends on BLACKFIN - select SERIAL_CORE - help - Enable SPORT emulate UART on Blackfin series. - - To compile this driver as a module, choose M here: the - module will be called bfin_sport_uart. - -config SERIAL_BFIN_SPORT_CONSOLE - bool "Console on Blackfin sport emulated uart" - depends on SERIAL_BFIN_SPORT=y - select SERIAL_CORE_CONSOLE - -config SERIAL_BFIN_SPORT0_UART - bool "Enable UART over SPORT0" - depends on SERIAL_BFIN_SPORT && !(BF542 || BF544) - help - Enable UART over SPORT0 - -config SERIAL_BFIN_SPORT0_UART_CTSRTS - bool "Enable UART over SPORT0 hardware flow control" - depends on SERIAL_BFIN_SPORT0_UART - help - Enable hardware flow control in the driver. - -config SERIAL_BFIN_SPORT1_UART - bool "Enable UART over SPORT1" - depends on SERIAL_BFIN_SPORT - help - Enable UART over SPORT1 - -config SERIAL_BFIN_SPORT1_UART_CTSRTS - bool "Enable UART over SPORT1 hardware flow control" - depends on SERIAL_BFIN_SPORT1_UART - help - Enable hardware flow control in the driver. - -config SERIAL_BFIN_SPORT2_UART - bool "Enable UART over SPORT2" - depends on SERIAL_BFIN_SPORT && (BF54x || BF538 || BF539) - help - Enable UART over SPORT2 - -config SERIAL_BFIN_SPORT2_UART_CTSRTS - bool "Enable UART over SPORT2 hardware flow control" - depends on SERIAL_BFIN_SPORT2_UART - help - Enable hardware flow control in the driver. - -config SERIAL_BFIN_SPORT3_UART - bool "Enable UART over SPORT3" - depends on SERIAL_BFIN_SPORT && (BF54x || BF538 || BF539) - help - Enable UART over SPORT3 - -config SERIAL_BFIN_SPORT3_UART_CTSRTS - bool "Enable UART over SPORT3 hardware flow control" - depends on SERIAL_BFIN_SPORT3_UART - help - Enable hardware flow control in the driver. - -config SERIAL_TIMBERDALE - tristate "Support for timberdale UART" - select SERIAL_CORE - ---help--- - Add support for UART controller on timberdale. - -config SERIAL_BCM63XX - tristate "bcm63xx serial port support" - select SERIAL_CORE - depends on BCM63XX - help - If you have a bcm63xx CPU, you can enable its onboard - serial port by enabling this options. - - To compile this driver as a module, choose M here: the - module will be called bcm963xx_uart. - -config SERIAL_BCM63XX_CONSOLE - bool "Console on bcm63xx serial port" - depends on SERIAL_BCM63XX=y - select SERIAL_CORE_CONSOLE - help - If you have enabled the serial port on the bcm63xx CPU - you can make it the console by answering Y to this option. - -config SERIAL_GRLIB_GAISLER_APBUART - tristate "GRLIB APBUART serial support" - depends on OF - ---help--- - Add support for the GRLIB APBUART serial port. - -config SERIAL_GRLIB_GAISLER_APBUART_CONSOLE - bool "Console on GRLIB APBUART serial port" - depends on SERIAL_GRLIB_GAISLER_APBUART=y - select SERIAL_CORE_CONSOLE - help - Support for running a console on the GRLIB APBUART - -config SERIAL_ALTERA_JTAGUART - tristate "Altera JTAG UART support" - select SERIAL_CORE - help - This driver supports the Altera JTAG UART port. - -config SERIAL_ALTERA_JTAGUART_CONSOLE - bool "Altera JTAG UART console support" - depends on SERIAL_ALTERA_JTAGUART=y - select SERIAL_CORE_CONSOLE - help - Enable a Altera JTAG UART port to be the system console. - -config SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS - bool "Bypass output when no connection" - depends on SERIAL_ALTERA_JTAGUART_CONSOLE - select SERIAL_CORE_CONSOLE - help - Bypass console output and keep going even if there is no - JTAG terminal connection with the host. - -config SERIAL_ALTERA_UART - tristate "Altera UART support" - select SERIAL_CORE - help - This driver supports the Altera softcore UART port. - -config SERIAL_ALTERA_UART_MAXPORTS - int "Maximum number of Altera UART ports" - depends on SERIAL_ALTERA_UART - default 4 - help - This setting lets you define the maximum number of the Altera - UART ports. The usual default varies from board to board, and - this setting is a way of catering for that. - -config SERIAL_ALTERA_UART_BAUDRATE - int "Default baudrate for Altera UART ports" - depends on SERIAL_ALTERA_UART - default 115200 - help - This setting lets you define what the default baudrate is for the - Altera UART ports. The usual default varies from board to board, - and this setting is a way of catering for that. - -config SERIAL_ALTERA_UART_CONSOLE - bool "Altera UART console support" - depends on SERIAL_ALTERA_UART=y - select SERIAL_CORE_CONSOLE - help - Enable a Altera UART port to be the system console. - -config SERIAL_IFX6X60 - tristate "SPI protocol driver for Infineon 6x60 modem (EXPERIMENTAL)" - depends on GPIOLIB && SPI && EXPERIMENTAL - help - Support for the IFX6x60 modem devices on Intel MID platforms. - -config SERIAL_PCH_UART - tristate "Intel EG20T PCH UART" - depends on PCI && DMADEVICES - select SERIAL_CORE - select PCH_DMA - help - This driver is for PCH(Platform controller Hub) UART of Intel EG20T - which is an IOH(Input/Output Hub) for x86 embedded processor. - Enabling PCH_DMA, this PCH UART works as DMA mode. -endmenu |