diff options
Diffstat (limited to 'drivers/serial/8250_pci.c')
| -rw-r--r-- | drivers/serial/8250_pci.c | 51 |
1 files changed, 32 insertions, 19 deletions
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index 864ef859be5..851e4839d6d 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -134,7 +134,7 @@ afavlab_setup(struct serial_private *priv, struct pciserial_board *board, * and Keystone have one Diva chip with 3 UARTs. Some later machines have * one Diva chip, but it has been expanded to 5 UARTs. */ -static int __devinit pci_hp_diva_init(struct pci_dev *dev) +static int pci_hp_diva_init(struct pci_dev *dev) { int rc = 0; @@ -194,7 +194,7 @@ pci_hp_diva_setup(struct serial_private *priv, struct pciserial_board *board, /* * Added for EKF Intel i960 serial boards */ -static int __devinit pci_inteli960ni_init(struct pci_dev *dev) +static int pci_inteli960ni_init(struct pci_dev *dev) { unsigned long oldval; @@ -216,7 +216,7 @@ static int __devinit pci_inteli960ni_init(struct pci_dev *dev) * seems to be mainly needed on card using the PLX which also use I/O * mapped memory. */ -static int __devinit pci_plx9050_init(struct pci_dev *dev) +static int pci_plx9050_init(struct pci_dev *dev) { u8 irq_config; void __iomem *p; @@ -314,7 +314,7 @@ sbs_setup(struct serial_private *priv, struct pciserial_board *board, /* global control register offset for SBS PMC-OctalPro */ #define OCT_REG_CR_OFF 0x500 -static int __devinit sbs_init(struct pci_dev *dev) +static int sbs_init(struct pci_dev *dev) { u8 __iomem *p; @@ -458,11 +458,11 @@ static int pci_siig_setup(struct serial_private *priv, * growing *huge*, we use this function to collapse some 70 entries * in the PCI table into one, for sanity's and compactness's sake. */ -static unsigned short timedia_single_port[] = { +static const unsigned short timedia_single_port[] = { 0x4025, 0x4027, 0x4028, 0x5025, 0x5027, 0 }; -static unsigned short timedia_dual_port[] = { +static const unsigned short timedia_dual_port[] = { 0x0002, 0x4036, 0x4037, 0x4038, 0x4078, 0x4079, 0x4085, 0x4088, 0x4089, 0x5037, 0x5078, 0x5079, 0x5085, 0x6079, 0x7079, 0x8079, 0x8137, 0x8138, 0x8237, 0x8238, 0x9079, @@ -470,35 +470,34 @@ static unsigned short timedia_dual_port[] = { 0xD079, 0 }; -static unsigned short timedia_quad_port[] = { +static const unsigned short timedia_quad_port[] = { 0x4055, 0x4056, 0x4095, 0x4096, 0x5056, 0x8156, 0x8157, 0x8256, 0x8257, 0x9056, 0x9156, 0x9157, 0x9158, 0x9159, 0x9256, 0x9257, 0xA056, 0xA157, 0xA158, 0xA159, 0xB056, 0xB157, 0 }; -static unsigned short timedia_eight_port[] = { +static const unsigned short timedia_eight_port[] = { 0x4065, 0x4066, 0x5065, 0x5066, 0x8166, 0x9066, 0x9166, 0x9167, 0x9168, 0xA066, 0xA167, 0xA168, 0 }; static const struct timedia_struct { int num; - unsigned short *ids; + const unsigned short *ids; } timedia_data[] = { { 1, timedia_single_port }, { 2, timedia_dual_port }, { 4, timedia_quad_port }, - { 8, timedia_eight_port }, - { 0, NULL } + { 8, timedia_eight_port } }; -static int __devinit pci_timedia_init(struct pci_dev *dev) +static int pci_timedia_init(struct pci_dev *dev) { - unsigned short *ids; + const unsigned short *ids; int i, j; - for (i = 0; timedia_data[i].num; i++) { + for (i = 0; i < ARRAY_SIZE(timedia_data); i++) { ids = timedia_data[i].ids; for (j = 0; ids[j]; j++) if (dev->subsystem_device == ids[j]) @@ -566,13 +565,13 @@ titan_400l_800l_setup(struct serial_private *priv, return setup_port(priv, port, bar, offset, board->reg_shift); } -static int __devinit pci_xircom_init(struct pci_dev *dev) +static int pci_xircom_init(struct pci_dev *dev) { msleep(100); return 0; } -static int __devinit pci_netmos_init(struct pci_dev *dev) +static int pci_netmos_init(struct pci_dev *dev) { /* subdevice 0x00PS means <P> parallel, <S> serial */ unsigned int num_serial = dev->subsystem_device & 0xf; @@ -622,7 +621,7 @@ pci_default_setup(struct serial_private *priv, struct pciserial_board *board, */ static struct pci_serial_quirk pci_serial_quirks[] = { /* - * AFAVLAB cards. + * AFAVLAB cards - these may be called via parport_serial * It is not clear whether this applies to all products. */ { @@ -754,7 +753,7 @@ static struct pci_serial_quirk pci_serial_quirks[] = { .exit = __devexit_p(sbs_exit), }, /* - * SIIG cards. + * SIIG cards - these may be called via parport_serial */ { .vendor = PCI_VENDOR_ID_SIIG, @@ -811,7 +810,7 @@ static struct pci_serial_quirk pci_serial_quirks[] = { .setup = pci_default_setup, }, /* - * Netmos cards + * Netmos cards - these may be called via parport_serial */ { .vendor = PCI_VENDOR_ID_NETMOS, @@ -936,6 +935,7 @@ enum pci_board_num_t { pbn_b1_8_1382400, pbn_b2_1_115200, + pbn_b2_2_115200, pbn_b2_8_115200, pbn_b2_1_460800, @@ -1243,6 +1243,12 @@ static struct pciserial_board pci_boards[] __devinitdata = { .base_baud = 115200, .uart_offset = 8, }, + [pbn_b2_2_115200] = { + .flags = FL_BASE2, + .num_ports = 2, + .base_baud = 115200, + .uart_offset = 8, + }, [pbn_b2_8_115200] = { .flags = FL_BASE2, .num_ports = 8, @@ -2340,6 +2346,13 @@ static struct pci_device_id serial_pci_tbl[] = { pbn_b0_1_115200 }, /* + * IntaShield IS-200 + */ + { PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS200, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, /* 135a.0811 */ + pbn_b2_2_115200 }, + + /* * These entries match devices with class COMMUNICATION_SERIAL, * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL */ |