diff options
Diffstat (limited to 'drivers/serial/8250_pci.c')
| -rw-r--r-- | drivers/serial/8250_pci.c | 2303 |
1 files changed, 2303 insertions, 0 deletions
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c new file mode 100644 index 00000000000..f8d90d0ecfe --- /dev/null +++ b/drivers/serial/8250_pci.c @@ -0,0 +1,2303 @@ +/* + * linux/drivers/char/8250_pci.c + * + * Probe module for 8250/16550-type PCI serial ports. + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * + * Copyright (C) 2001 Russell King, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. + * + * $Id: 8250_pci.c,v 1.28 2002/11/02 11:14:18 rmk Exp $ + */ +#include <linux/module.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/sched.h> +#include <linux/string.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/tty.h> +#include <linux/serial_core.h> +#include <linux/8250_pci.h> +#include <linux/bitops.h> + +#include <asm/byteorder.h> +#include <asm/io.h> + +#include "8250.h" + +#undef SERIAL_DEBUG_PCI + +/* + * Definitions for PCI support. + */ +#define FL_BASE_MASK 0x0007 +#define FL_BASE0 0x0000 +#define FL_BASE1 0x0001 +#define FL_BASE2 0x0002 +#define FL_BASE3 0x0003 +#define FL_BASE4 0x0004 +#define FL_GET_BASE(x) (x & FL_BASE_MASK) + +/* Use successive BARs (PCI base address registers), + else use offset into some specified BAR */ +#define FL_BASE_BARS 0x0008 + +/* do not assign an irq */ +#define FL_NOIRQ 0x0080 + +/* Use the Base address register size to cap number of ports */ +#define FL_REGION_SZ_CAP 0x0100 + +struct pci_board { + unsigned int flags; + unsigned int num_ports; + unsigned int base_baud; + unsigned int uart_offset; + unsigned int reg_shift; + unsigned int first_offset; +}; + +/* + * init function returns: + * > 0 - number of ports + * = 0 - use board->num_ports + * < 0 - error + */ +struct pci_serial_quirk { + u32 vendor; + u32 device; + u32 subvendor; + u32 subdevice; + int (*init)(struct pci_dev *dev); + int (*setup)(struct pci_dev *dev, struct pci_board *board, + struct uart_port *port, int idx); + void (*exit)(struct pci_dev *dev); +}; + +#define PCI_NUM_BAR_RESOURCES 6 + +struct serial_private { + unsigned int nr; + void __iomem *remapped_bar[PCI_NUM_BAR_RESOURCES]; + struct pci_serial_quirk *quirk; + int line[0]; +}; + +static void moan_device(const char *str, struct pci_dev *dev) +{ + printk(KERN_WARNING "%s: %s\n" + KERN_WARNING "Please send the output of lspci -vv, this\n" + KERN_WARNING "message (0x%04x,0x%04x,0x%04x,0x%04x), the\n" + KERN_WARNING "manufacturer and name of serial board or\n" + KERN_WARNING "modem board to rmk+serial@arm.linux.org.uk.\n", + pci_name(dev), str, dev->vendor, dev->device, + dev->subsystem_vendor, dev->subsystem_device); +} + +static int +setup_port(struct pci_dev *dev, struct uart_port *port, + int bar, int offset, int regshift) +{ + struct serial_private *priv = pci_get_drvdata(dev); + unsigned long base, len; + + if (bar >= PCI_NUM_BAR_RESOURCES) + return -EINVAL; + + if (pci_resource_flags(dev, bar) & IORESOURCE_MEM) { + base = pci_resource_start(dev, bar); + len = pci_resource_len(dev, bar); + + if (!priv->remapped_bar[bar]) + priv->remapped_bar[bar] = ioremap(base, len); + if (!priv->remapped_bar[bar]) + return -ENOMEM; + + port->iotype = UPIO_MEM; + port->mapbase = base + offset; + port->membase = priv->remapped_bar[bar] + offset; + port->regshift = regshift; + } else { + base = pci_resource_start(dev, bar) + offset; + port->iotype = UPIO_PORT; + port->iobase = base; + } + return 0; +} + +/* + * AFAVLAB uses a different mixture of BARs and offsets + * Not that ugly ;) -- HW + */ +static int +afavlab_setup(struct pci_dev *dev, struct pci_board *board, + struct uart_port *port, int idx) +{ + unsigned int bar, offset = board->first_offset; + + bar = FL_GET_BASE(board->flags); + if (idx < 4) + bar += idx; + else { + bar = 4; + offset += (idx - 4) * board->uart_offset; + } + + return setup_port(dev, port, bar, offset, board->reg_shift); +} + +/* + * HP's Remote Management Console. The Diva chip came in several + * different versions. N-class, L2000 and A500 have two Diva chips, each + * with 3 UARTs (the third UART on the second chip is unused). Superdome + * and Keystone have one Diva chip with 3 UARTs. Some later machines have + * one Diva chip, but it has been expanded to 5 UARTs. + */ +static int __devinit pci_hp_diva_init(struct pci_dev *dev) +{ + int rc = 0; + + switch (dev->subsystem_device) { + case PCI_DEVICE_ID_HP_DIVA_TOSCA1: + case PCI_DEVICE_ID_HP_DIVA_HALFDOME: + case PCI_DEVICE_ID_HP_DIVA_KEYSTONE: + case PCI_DEVICE_ID_HP_DIVA_EVEREST: + rc = 3; + break; + case PCI_DEVICE_ID_HP_DIVA_TOSCA2: + rc = 2; + break; + case PCI_DEVICE_ID_HP_DIVA_MAESTRO: + rc = 4; + break; + case PCI_DEVICE_ID_HP_DIVA_POWERBAR: + rc = 1; + break; + } + + return rc; +} + +/* + * HP's Diva chip puts the 4th/5th serial port further out, and + * some serial ports are supposed to be hidden on certain models. + */ +static int +pci_hp_diva_setup(struct pci_dev *dev, struct pci_board *board, + struct uart_port *port, int idx) +{ + unsigned int offset = board->first_offset; + unsigned int bar = FL_GET_BASE(board->flags); + + switch (dev->subsystem_device) { + case PCI_DEVICE_ID_HP_DIVA_MAESTRO: + if (idx == 3) + idx++; + break; + case PCI_DEVICE_ID_HP_DIVA_EVEREST: + if (idx > 0) + idx++; + if (idx > 2) + idx++; + break; + } + if (idx > 2) + offset = 0x18; + + offset += idx * board->uart_offset; + + return setup_port(dev, port, bar, offset, board->reg_shift); +} + +/* + * Added for EKF Intel i960 serial boards + */ +static int __devinit pci_inteli960ni_init(struct pci_dev *dev) +{ + unsigned long oldval; + + if (!(dev->subsystem_device & 0x1000)) + return -ENODEV; + + /* is firmware started? */ + pci_read_config_dword(dev, 0x44, (void*) &oldval); + if (oldval == 0x00001000L) { /* RESET value */ + printk(KERN_DEBUG "Local i960 firmware missing"); + return -ENODEV; + } + return 0; +} + +/* + * Some PCI serial cards using the PLX 9050 PCI interface chip require + * that the card interrupt be explicitly enabled or disabled. This + * seems to be mainly needed on card using the PLX which also use I/O + * mapped memory. + */ +static int __devinit pci_plx9050_init(struct pci_dev *dev) +{ + u8 irq_config; + void __iomem *p; + + if ((pci_resource_flags(dev, 0) & IORESOURCE_MEM) == 0) { + moan_device("no memory in bar 0", dev); + return 0; + } + + irq_config = 0x41; + if (dev->vendor == PCI_VENDOR_ID_PANACOM) + irq_config = 0x43; + if ((dev->vendor == PCI_VENDOR_ID_PLX) && + (dev->device == PCI_DEVICE_ID_PLX_ROMULUS)) { + /* + * As the megawolf cards have the int pins active + * high, and have 2 UART chips, both ints must be + * enabled on the 9050. Also, the UARTS are set in + * 16450 mode by default, so we have to enable the + * 16C950 'enhanced' mode so that we can use the + * deep FIFOs + */ + irq_config = 0x5b; + } + + /* + * enable/disable interrupts + */ + p = ioremap(pci_resource_start(dev, 0), 0x80); + if (p == NULL) + return -ENOMEM; + writel(irq_config, p + 0x4c); + + /* + * Read the register back to ensure that it took effect. + */ + readl(p + 0x4c); + iounmap(p); + + return 0; +} + +static void __devexit pci_plx9050_exit(struct pci_dev *dev) +{ + u8 __iomem *p; + + if ((pci_resource_flags(dev, 0) & IORESOURCE_MEM) == 0) + return; + + /* + * disable interrupts + */ + p = ioremap(pci_resource_start(dev, 0), 0x80); + if (p != NULL) { + writel(0, p + 0x4c); + + /* + * Read the register back to ensure that it took effect. + */ + readl(p + 0x4c); + iounmap(p); + } +} + +/* SBS Technologies Inc. PMC-OCTPRO and P-OCTAL cards */ +static int +sbs_setup(struct pci_dev *dev, struct pci_board *board, + struct uart_port *port, int idx) +{ + unsigned int bar, offset = board->first_offset; + + bar = 0; + + if (idx < 4) { + /* first four channels map to 0, 0x100, 0x200, 0x300 */ + offset += idx * board->uart_offset; + } else if (idx < 8) { + /* last four channels map to 0x1000, 0x1100, 0x1200, 0x1300 */ + offset += idx * board->uart_offset + 0xC00; + } else /* we have only 8 ports on PMC-OCTALPRO */ + return 1; + + return setup_port(dev, port, bar, offset, board->reg_shift); +} + +/* +* This does initialization for PMC OCTALPRO cards: +* maps the device memory, resets the UARTs (needed, bc +* if the module is removed and inserted again, the card +* is in the sleep mode) and enables global interrupt. +*/ + +/* global control register offset for SBS PMC-OctalPro */ +#define OCT_REG_CR_OFF 0x500 + +static int __devinit sbs_init(struct pci_dev *dev) +{ + u8 __iomem *p; + + p = ioremap(pci_resource_start(dev, 0),pci_resource_len(dev,0)); + + if (p == NULL) + return -ENOMEM; + /* Set bit-4 Control Register (UART RESET) in to reset the uarts */ + writeb(0x10,p + OCT_REG_CR_OFF); + udelay(50); + writeb(0x0,p + OCT_REG_CR_OFF); + + /* Set bit-2 (INTENABLE) of Control Register */ + writeb(0x4, p + OCT_REG_CR_OFF); + iounmap(p); + + return 0; +} + +/* + * Disables the global interrupt of PMC-OctalPro + */ + +static void __devexit sbs_exit(struct pci_dev *dev) +{ + u8 __iomem *p; + + p = ioremap(pci_resource_start(dev, 0),pci_resource_len(dev,0)); + if (p != NULL) { + writeb(0, p + OCT_REG_CR_OFF); + } + iounmap(p); +} + +/* + * SIIG serial cards have an PCI interface chip which also controls + * the UART clocking frequency. Each UART can be clocked independently + * (except cards equiped with 4 UARTs) and initial clocking settings + * are stored in the EEPROM chip. It can cause problems because this + * version of serial driver doesn't support differently clocked UART's + * on single PCI card. To prevent this, initialization functions set + * high frequency clocking for all UART's on given card. It is safe (I + * hope) because it doesn't touch EEPROM settings to prevent conflicts + * with other OSes (like M$ DOS). + * + * SIIG support added by Andrey Panin <pazke@donpac.ru>, 10/1999 + * + * There is two family of SIIG serial cards with different PCI + * interface chip and different configuration methods: + * - 10x cards have control registers in IO and/or memory space; + * - 20x cards have control registers in standard PCI configuration space. + * + * Note: some SIIG cards are probed by the parport_serial object. + */ + +#define PCI_DEVICE_ID_SIIG_1S_10x (PCI_DEVICE_ID_SIIG_1S_10x_550 & 0xfffc) +#define PCI_DEVICE_ID_SIIG_2S_10x (PCI_DEVICE_ID_SIIG_2S_10x_550 & 0xfff8) + +static int pci_siig10x_init(struct pci_dev *dev) +{ + u16 data; + void __iomem *p; + + switch (dev->device & 0xfff8) { + case PCI_DEVICE_ID_SIIG_1S_10x: /* 1S */ + data = 0xffdf; + break; + case PCI_DEVICE_ID_SIIG_2S_10x: /* 2S, 2S1P */ + data = 0xf7ff; + break; + default: /* 1S1P, 4S */ + data = 0xfffb; + break; + } + + p = ioremap(pci_resource_start(dev, 0), 0x80); + if (p == NULL) + return -ENOMEM; + + writew(readw(p + 0x28) & data, p + 0x28); + readw(p + 0x28); + iounmap(p); + return 0; +} + +#define PCI_DEVICE_ID_SIIG_2S_20x (PCI_DEVICE_ID_SIIG_2S_20x_550 & 0xfffc) +#define PCI_DEVICE_ID_SIIG_2S1P_20x (PCI_DEVICE_ID_SIIG_2S1P_20x_550 & 0xfffc) + +static int pci_siig20x_init(struct pci_dev *dev) +{ + u8 data; + + /* Change clock frequency for the first UART. */ + pci_read_config_byte(dev, 0x6f, &data); + pci_write_config_byte(dev, 0x6f, data & 0xef); + + /* If this card has 2 UART, we have to do the same with second UART. */ + if (((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S_20x) || + ((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S1P_20x)) { + pci_read_config_byte(dev, 0x73, &data); + pci_write_config_byte(dev, 0x73, data & 0xef); + } + return 0; +} + +int pci_siig10x_fn(struct pci_dev *dev, int enable) +{ + int ret = 0; + if (enable) + ret = pci_siig10x_init(dev); + return ret; +} + +int pci_siig20x_fn(struct pci_dev *dev, int enable) +{ + int ret = 0; + if (enable) + ret = pci_siig20x_init(dev); + return ret; +} + +EXPORT_SYMBOL(pci_siig10x_fn); +EXPORT_SYMBOL(pci_siig20x_fn); + +/* + * Timedia has an explosion of boards, and to avoid the PCI table from + * growing *huge*, we use this function to collapse some 70 entries + * in the PCI table into one, for sanity's and compactness's sake. + */ +static unsigned short timedia_single_port[] = { + 0x4025, 0x4027, 0x4028, 0x5025, 0x5027, 0 +}; + +static unsigned short timedia_dual_port[] = { + 0x0002, 0x4036, 0x4037, 0x4038, 0x4078, 0x4079, 0x4085, + 0x4088, 0x4089, 0x5037, 0x5078, 0x5079, 0x5085, 0x6079, + 0x7079, 0x8079, 0x8137, 0x8138, 0x8237, 0x8238, 0x9079, + 0x9137, 0x9138, 0x9237, 0x9238, 0xA079, 0xB079, 0xC079, + 0xD079, 0 +}; + +static unsigned short timedia_quad_port[] = { + 0x4055, 0x4056, 0x4095, 0x4096, 0x5056, 0x8156, 0x8157, + 0x8256, 0x8257, 0x9056, 0x9156, 0x9157, 0x9158, 0x9159, + 0x9256, 0x9257, 0xA056, 0xA157, 0xA158, 0xA159, 0xB056, + 0xB157, 0 +}; + +static unsigned short timedia_eight_port[] = { + 0x4065, 0x4066, 0x5065, 0x5066, 0x8166, 0x9066, 0x9166, + 0x9167, 0x9168, 0xA066, 0xA167, 0xA168, 0 +}; + +static struct timedia_struct { + int num; + unsigned short *ids; +} timedia_data[] = { + { 1, timedia_single_port }, + { 2, timedia_dual_port }, + { 4, timedia_quad_port }, + { 8, timedia_eight_port }, + { 0, NULL } +}; + +static int __devinit pci_timedia_init(struct pci_dev *dev) +{ + unsigned short *ids; + int i, j; + + for (i = 0; timedia_data[i].num; i++) { + ids = timedia_data[i].ids; + for (j = 0; ids[j]; j++) + if (dev->subsystem_device == ids[j]) + return timedia_data[i].num; + } + return 0; +} + +/* + * Timedia/SUNIX uses a mixture of BARs and offsets + * Ugh, this is ugly as all hell --- TYT + */ +static int +pci_timedia_setup(struct pci_dev *dev, struct pci_board *board, + struct uart_port *port, int idx) +{ + unsigned int bar = 0, offset = board->first_offset; + + switch (idx) { + case 0: + bar = 0; + break; + case 1: + offset = board->uart_offset; + bar = 0; + break; + case 2: + bar = 1; + break; + case 3: + offset = board->uart_offset; + bar = 1; + case 4: /* BAR 2 */ + case 5: /* BAR 3 */ + case 6: /* BAR 4 */ + case 7: /* BAR 5 */ + bar = idx - 2; + } + + return setup_port(dev, port, bar, offset, board->reg_shift); +} + +/* + * Some Titan cards are also a little weird + */ +static int +titan_400l_800l_setup(struct pci_dev *dev, struct pci_board *board, + struct uart_port *port, int idx) +{ + unsigned int bar, offset = board->first_offset; + + switch (idx) { + case 0: + bar = 1; + break; + case 1: + bar = 2; + break; + default: + bar = 4; + offset = (idx - 2) * board->uart_offset; + } + + return setup_port(dev, port, bar, offset, board->reg_shift); +} + +static int __devinit pci_xircom_init(struct pci_dev *dev) +{ + msleep(100); + return 0; +} + +static int __devinit pci_netmos_init(struct pci_dev *dev) +{ + /* subdevice 0x00PS means <P> parallel, <S> serial */ + unsigned int num_serial = dev->subsystem_device & 0xf; + + if (num_serial == 0) + return -ENODEV; + return num_serial; +} + +static int +pci_default_setup(struct pci_dev *dev, struct pci_board *board, + struct uart_port *port, int idx) +{ + unsigned int bar, offset = board->first_offset, maxnr; + + bar = FL_GET_BASE(board->flags); + if (board->flags & FL_BASE_BARS) + bar += idx; + else + offset += idx * board->uart_offset; + + maxnr = (pci_resource_len(dev, bar) - board->first_offset) / + (8 << board->reg_shift); + + if (board->flags & FL_REGION_SZ_CAP && idx >= maxnr) + return 1; + + return setup_port(dev, port, bar, offset, board->reg_shift); +} + +/* This should be in linux/pci_ids.h */ +#define PCI_VENDOR_ID_SBSMODULARIO 0x124B +#define PCI_SUBVENDOR_ID_SBSMODULARIO 0x124B +#define PCI_DEVICE_ID_OCTPRO 0x0001 +#define PCI_SUBDEVICE_ID_OCTPRO232 0x0108 +#define PCI_SUBDEVICE_ID_OCTPRO422 0x0208 +#define PCI_SUBDEVICE_ID_POCTAL232 0x0308 +#define PCI_SUBDEVICE_ID_POCTAL422 0x0408 + +/* + * Master list of serial port init/setup/exit quirks. + * This does not describe the general nature of the port. + * (ie, baud base, number and location of ports, etc) + * + * This list is ordered alphabetically by vendor then device. + * Specific entries must come before more generic entries. + */ +static struct pci_serial_quirk pci_serial_quirks[] = { + /* + * AFAVLAB cards. + * It is not clear whether this applies to all products. + */ + { + .vendor = PCI_VENDOR_ID_AFAVLAB, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = afavlab_setup, + }, + /* + * HP Diva + */ + { + .vendor = PCI_VENDOR_ID_HP, + .device = PCI_DEVICE_ID_HP_DIVA, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_hp_diva_init, + .setup = pci_hp_diva_setup, + }, + /* + * Intel + */ + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_80960_RP, + .subvendor = 0xe4bf, + .subdevice = PCI_ANY_ID, + .init = pci_inteli960ni_init, + .setup = pci_default_setup, + }, + /* + * Panacom + */ + { + .vendor = PCI_VENDOR_ID_PANACOM, + .device = PCI_DEVICE_ID_PANACOM_QUADMODEM, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_plx9050_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_plx9050_exit), + }, + { + .vendor = PCI_VENDOR_ID_PANACOM, + .device = PCI_DEVICE_ID_PANACOM_DUALMODEM, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_plx9050_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_plx9050_exit), + }, + /* + * PLX + */ + { + .vendor = PCI_VENDOR_ID_PLX, + .device = PCI_DEVICE_ID_PLX_9050, + .subvendor = PCI_SUBVENDOR_ID_KEYSPAN, + .subdevice = PCI_SUBDEVICE_ID_KEYSPAN_SX2, + .init = pci_plx9050_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_plx9050_exit), + }, + { + .vendor = PCI_VENDOR_ID_PLX, + .device = PCI_DEVICE_ID_PLX_ROMULUS, + .subvendor = PCI_VENDOR_ID_PLX, + .subdevice = PCI_DEVICE_ID_PLX_ROMULUS, + .init = pci_plx9050_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_plx9050_exit), + }, + /* + * SBS Technologies, Inc., PMC-OCTALPRO 232 + */ + { + .vendor = PCI_VENDOR_ID_SBSMODULARIO, + .device = PCI_DEVICE_ID_OCTPRO, + .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO, + .subdevice = PCI_SUBDEVICE_ID_OCTPRO232, + .init = sbs_init, + .setup = sbs_setup, + .exit = __devexit_p(sbs_exit), + }, + /* + * SBS Technologies, Inc., PMC-OCTALPRO 422 + */ + { + .vendor = PCI_VENDOR_ID_SBSMODULARIO, + .device = PCI_DEVICE_ID_OCTPRO, + .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO, + .subdevice = PCI_SUBDEVICE_ID_OCTPRO422, + .init = sbs_init, + .setup = sbs_setup, + .exit = __devexit_p(sbs_exit), + }, + /* + * SBS Technologies, Inc., P-Octal 232 + */ + { + .vendor = PCI_VENDOR_ID_SBSMODULARIO, + .device = PCI_DEVICE_ID_OCTPRO, + .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO, + .subdevice = PCI_SUBDEVICE_ID_POCTAL232, + .init = sbs_init, + .setup = sbs_setup, + .exit = __devexit_p(sbs_exit), + }, + /* + * SBS Technologies, Inc., P-Octal 422 + */ + { + .vendor = PCI_VENDOR_ID_SBSMODULARIO, + .device = PCI_DEVICE_ID_OCTPRO, + .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO, + .subdevice = PCI_SUBDEVICE_ID_POCTAL422, + .init = sbs_init, + .setup = sbs_setup, + .exit = __devexit_p(sbs_exit), + }, + + /* + * SIIG cards. + * It is not clear whether these could be collapsed. + */ + { + .vendor = PCI_VENDOR_ID_SIIG, + .device = PCI_DEVICE_ID_SIIG_1S_10x_550, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_siig10x_init, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_SIIG, + .device = PCI_DEVICE_ID_SIIG_1S_10x_650, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_siig10x_init, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_SIIG, + .device = PCI_DEVICE_ID_SIIG_1S_10x_850, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_siig10x_init, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_SIIG, + .device = PCI_DEVICE_ID_SIIG_2S_10x_550, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_siig10x_init, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_SIIG, + .device = PCI_DEVICE_ID_SIIG_2S_10x_650, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_siig10x_init, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_SIIG, + .device = PCI_DEVICE_ID_SIIG_2S_10x_850, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_siig10x_init, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_SIIG, + .device = PCI_DEVICE_ID_SIIG_4S_10x_550, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_siig10x_init, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_SIIG, + .device = PCI_DEVICE_ID_SIIG_4S_10x_650, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_siig10x_init, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_SIIG, + .device = PCI_DEVICE_ID_SIIG_4S_10x_850, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_siig10x_init, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_SIIG, + .device = PCI_DEVICE_ID_SIIG_1S_20x_550, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_siig20x_init, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_SIIG, + .device = PCI_DEVICE_ID_SIIG_1S_20x_650, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_siig20x_init, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_SIIG, + .device = PCI_DEVICE_ID_SIIG_1S_20x_850, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_siig20x_init, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_SIIG, + .device = PCI_DEVICE_ID_SIIG_2S_20x_550, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_siig20x_init, + .setup = pci_default_setup, + }, + { .vendor = PCI_VENDOR_ID_SIIG, + .device = PCI_DEVICE_ID_SIIG_2S_20x_650, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_siig20x_init, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_SIIG, + .device = PCI_DEVICE_ID_SIIG_2S_20x_850, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_siig20x_init, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_SIIG, + .device = PCI_DEVICE_ID_SIIG_4S_20x_550, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_siig20x_init, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_SIIG, + .device = PCI_DEVICE_ID_SIIG_4S_20x_650, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_siig20x_init, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_SIIG, + .device = PCI_DEVICE_ID_SIIG_4S_20x_850, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_siig20x_init, + .setup = pci_default_setup, + }, + /* + * Titan cards + */ + { + .vendor = PCI_VENDOR_ID_TITAN, + .device = PCI_DEVICE_ID_TITAN_400L, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = titan_400l_800l_setup, + }, + { + .vendor = PCI_VENDOR_ID_TITAN, + .device = PCI_DEVICE_ID_TITAN_800L, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = titan_400l_800l_setup, + }, + /* + * Timedia cards + */ + { + .vendor = PCI_VENDOR_ID_TIMEDIA, + .device = PCI_DEVICE_ID_TIMEDIA_1889, + .subvendor = PCI_VENDOR_ID_TIMEDIA, + .subdevice = PCI_ANY_ID, + .init = pci_timedia_init, + .setup = pci_timedia_setup, + }, + { + .vendor = PCI_VENDOR_ID_TIMEDIA, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_timedia_setup, + }, + /* + * Xircom cards + */ + { + .vendor = PCI_VENDOR_ID_XIRCOM, + .device = PCI_DEVICE_ID_XIRCOM_X3201_MDM, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_xircom_init, + .setup = pci_default_setup, + }, + /* + * Netmos cards + */ + { + .vendor = PCI_VENDOR_ID_NETMOS, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_netmos_init, + .setup = pci_default_setup, + }, + /* + * Default "match everything" terminator entry + */ + { + .vendor = PCI_ANY_ID, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_default_setup, + } +}; + +static inline int quirk_id_matches(u32 quirk_id, u32 dev_id) +{ + return quirk_id == PCI_ANY_ID || quirk_id == dev_id; +} + +static struct pci_serial_quirk *find_quirk(struct pci_dev *dev) +{ + struct pci_serial_quirk *quirk; + + for (quirk = pci_serial_quirks; ; quirk++) + if (quirk_id_matches(quirk->vendor, dev->vendor) && + quirk_id_matches(quirk->device, dev->device) && + quirk_id_matches(quirk->subvendor, dev->subsystem_vendor) && + quirk_id_matches(quirk->subdevice, dev->subsystem_device)) + break; + return quirk; +} + +static _INLINE_ int +get_pci_irq(struct pci_dev *dev, struct pci_board *board, int idx) +{ + if (board->flags & FL_NOIRQ) + return 0; + else + return dev->irq; +} + +/* + * This is the configuration table for all of the PCI serial boards + * which we support. It is directly indexed by the pci_board_num_t enum + * value, which is encoded in the pci_device_id PCI probe table's + * driver_data member. + * + * The makeup of these names are: + * pbn_bn{_bt}_n_baud + * + * bn = PCI BAR number + * bt = Index using PCI BARs + * n = number of serial ports + * baud = baud rate + * + * Please note: in theory if n = 1, _bt infix should make no difference. + * ie, pbn_b0_1_115200 is the same as pbn_b0_bt_1_115200 + */ +enum pci_board_num_t { + pbn_default = 0, + + pbn_b0_1_115200, + pbn_b0_2_115200, + pbn_b0_4_115200, + pbn_b0_5_115200, + + pbn_b0_1_921600, + pbn_b0_2_921600, + pbn_b0_4_921600, + + pbn_b0_bt_1_115200, + pbn_b0_bt_2_115200, + pbn_b0_bt_8_115200, + + pbn_b0_bt_1_460800, + pbn_b0_bt_2_460800, + pbn_b0_bt_4_460800, + + pbn_b0_bt_1_921600, + pbn_b0_bt_2_921600, + pbn_b0_bt_4_921600, + pbn_b0_bt_8_921600, + + pbn_b1_1_115200, + pbn_b1_2_115200, + pbn_b1_4_115200, + pbn_b1_8_115200, + + pbn_b1_1_921600, + pbn_b1_2_921600, + pbn_b1_4_921600, + pbn_b1_8_921600, + + pbn_b1_bt_2_921600, + + pbn_b1_1_1382400, + pbn_b1_2_1382400, + pbn_b1_4_1382400, + pbn_b1_8_1382400, + + pbn_b2_1_115200, + pbn_b2_8_115200, + + pbn_b2_1_460800, + pbn_b2_4_460800, + pbn_b2_8_460800, + pbn_b2_16_460800, + + pbn_b2_1_921600, + pbn_b2_4_921600, + pbn_b2_8_921600, + + pbn_b2_bt_1_115200, + pbn_b2_bt_2_115200, + pbn_b2_bt_4_115200, + + pbn_b2_bt_2_921600, + pbn_b2_bt_4_921600, + + pbn_b3_4_115200, + pbn_b3_8_115200, + + /* + * Board-specific versions. + */ + pbn_panacom, + pbn_panacom2, + pbn_panacom4, + pbn_plx_romulus, + pbn_oxsemi, + pbn_intel_i960, + pbn_sgi_ioc3, + pbn_nec_nile4, + pbn_computone_4, + pbn_computone_6, + pbn_computone_8, + pbn_sbsxrsio, + pbn_exar_XR17C152, + pbn_exar_XR17C154, + pbn_exar_XR17C158, +}; + +/* + * uart_offset - the space between channels + * reg_shift - describes how the UART registers are mapped + * to PCI memory by the card. + * For example IER register on SBS, Inc. PMC-OctPro is located at + * offset 0x10 from the UART base, while UART_IER is defined as 1 + * in include/linux/serial_reg.h, + * see first lines of serial_in() and serial_out() in 8250.c +*/ + +static struct pci_board pci_boards[] __devinitdata = { + [pbn_default] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b0_1_115200] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b0_2_115200] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b0_4_115200] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b0_5_115200] = { + .flags = FL_BASE0, + .num_ports = 5, + .base_baud = 115200, + .uart_offset = 8, + }, + + [pbn_b0_1_921600] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b0_2_921600] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b0_4_921600] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 8, + }, + + [pbn_b0_bt_1_115200] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b0_bt_2_115200] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 2, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b0_bt_8_115200] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 8, + .base_baud = 115200, + .uart_offset = 8, + }, + + [pbn_b0_bt_1_460800] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 1, + .base_baud = 460800, + .uart_offset = 8, + }, + [pbn_b0_bt_2_460800] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 2, + .base_baud = 460800, + .uart_offset = 8, + }, + [pbn_b0_bt_4_460800] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 4, + .base_baud = 460800, + .uart_offset = 8, + }, + + [pbn_b0_bt_1_921600] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 1, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b0_bt_2_921600] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b0_bt_4_921600] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b0_bt_8_921600] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 8, + .base_baud = 921600, + .uart_offset = 8, + }, + + [pbn_b1_1_115200] = { + .flags = FL_BASE1, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b1_2_115200] = { + .flags = FL_BASE1, + .num_ports = 2, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b1_4_115200] = { + .flags = FL_BASE1, + .num_ports = 4, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b1_8_115200] = { + .flags = FL_BASE1, + .num_ports = 8, + .base_baud = 115200, + .uart_offset = 8, + }, + + [pbn_b1_1_921600] = { + .flags = FL_BASE1, + .num_ports = 1, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b1_2_921600] = { + .flags = FL_BASE1, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b1_4_921600] = { + .flags = FL_BASE1, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b1_8_921600] = { + .flags = FL_BASE1, + .num_ports = 8, + .base_baud = 921600, + .uart_offset = 8, + }, + + [pbn_b1_bt_2_921600] = { + .flags = FL_BASE1|FL_BASE_BARS, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 8, + }, + + [pbn_b1_1_1382400] = { + .flags = FL_BASE1, + .num_ports = 1, + .base_baud = 1382400, + .uart_offset = 8, + }, + [pbn_b1_2_1382400] = { + .flags = FL_BASE1, + .num_ports = 2, + .base_baud = 1382400, + .uart_offset = 8, + }, + [pbn_b1_4_1382400] = { + .flags = FL_BASE1, + .num_ports = 4, + .base_baud = 1382400, + .uart_offset = 8, + }, + [pbn_b1_8_1382400] = { + .flags = FL_BASE1, + .num_ports = 8, + .base_baud = 1382400, + .uart_offset = 8, + }, + + [pbn_b2_1_115200] = { + .flags = FL_BASE2, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b2_8_115200] = { + .flags = FL_BASE2, + .num_ports = 8, + .base_baud = 115200, + .uart_offset = 8, + }, + + [pbn_b2_1_460800] = { + .flags = FL_BASE2, + .num_ports = 1, + .base_baud = 460800, + .uart_offset = 8, + }, + [pbn_b2_4_460800] = { + .flags = FL_BASE2, + .num_ports = 4, + .base_baud = 460800, + .uart_offset = 8, + }, + [pbn_b2_8_460800] = { + .flags = FL_BASE2, + .num_ports = 8, + .base_baud = 460800, + .uart_offset = 8, + }, + [pbn_b2_16_460800] = { + .flags = FL_BASE2, + .num_ports = 16, + .base_baud = 460800, + .uart_offset = 8, + }, + + [pbn_b2_1_921600] = { + .flags = FL_BASE2, + .num_ports = 1, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b2_4_921600] = { + .flags = FL_BASE2, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b2_8_921600] = { + .flags = FL_BASE2, + .num_ports = 8, + .base_baud = 921600, + .uart_offset = 8, + }, + + [pbn_b2_bt_1_115200] = { + .flags = FL_BASE2|FL_BASE_BARS, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b2_bt_2_115200] = { + .flags = FL_BASE2|FL_BASE_BARS, + .num_ports = 2, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b2_bt_4_115200] = { + .flags = FL_BASE2|FL_BASE_BARS, + .num_ports = 4, + .base_baud = 115200, + .uart_offset = 8, + }, + + [pbn_b2_bt_2_921600] = { + .flags = FL_BASE2|FL_BASE_BARS, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b2_bt_4_921600] = { + .flags = FL_BASE2|FL_BASE_BARS, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 8, + }, + + [pbn_b3_4_115200] = { + .flags = FL_BASE3, + .num_ports = 4, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b3_8_115200] = { + .flags = FL_BASE3, + .num_ports = 8, + .base_baud = 115200, + .uart_offset = 8, + }, + + /* + * Entries following this are board-specific. + */ + + /* + * Panacom - IOMEM + */ + [pbn_panacom] = { + .flags = FL_BASE2, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 0x400, + .reg_shift = 7, + }, + [pbn_panacom2] = { + .flags = FL_BASE2|FL_BASE_BARS, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 0x400, + .reg_shift = 7, + }, + [pbn_panacom4] = { + .flags = FL_BASE2|FL_BASE_BARS, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 0x400, + .reg_shift = 7, + }, + + /* I think this entry is broken - the first_offset looks wrong --rmk */ + [pbn_plx_romulus] = { + .flags = FL_BASE2, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 8 << 2, + .reg_shift = 2, + .first_offset = 0x03, + }, + + /* + * This board uses the size of PCI Base region 0 to + * signal now many ports are available + */ + [pbn_oxsemi] = { + .flags = FL_BASE0|FL_REGION_SZ_CAP, + .num_ports = 32, + .base_baud = 115200, + .uart_offset = 8, + }, + + /* + * EKF addition for i960 Boards form EKF with serial port. + * Max 256 ports. + */ + [pbn_intel_i960] = { + .flags = FL_BASE0, + .num_ports = 32, + .base_baud = 921600, + .uart_offset = 8 << 2, + .reg_shift = 2, + .first_offset = 0x10000, + }, + [pbn_sgi_ioc3] = { + .flags = FL_BASE0|FL_NOIRQ, + .num_ports = 1, + .base_baud = 458333, + .uart_offset = 8, + .reg_shift = 0, + .first_offset = 0x20178, + }, + + /* + * NEC Vrc-5074 (Nile 4) builtin UART. + */ + [pbn_nec_nile4] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 520833, + .uart_offset = 8 << 3, + .reg_shift = 3, + .first_offset = 0x300, + }, + + /* + * Computone - uses IOMEM. + */ + [pbn_computone_4] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 0x40, + .reg_shift = 2, + .first_offset = 0x200, + }, + [pbn_computone_6] = { + .flags = FL_BASE0, + .num_ports = 6, + .base_baud = 921600, + .uart_offset = 0x40, + .reg_shift = 2, + .first_offset = 0x200, + }, + [pbn_computone_8] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 921600, + .uart_offset = 0x40, + .reg_shift = 2, + .first_offset = 0x200, + }, + [pbn_sbsxrsio] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 460800, + .uart_offset = 256, + .reg_shift = 4, + }, + /* + * Exar Corp. XR17C15[248] Dual/Quad/Octal UART + * Only basic 16550A support. + * XR17C15[24] are not tested, but they should work. + */ + [pbn_exar_XR17C152] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 0x200, + }, + [pbn_exar_XR17C154] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 0x200, + }, + [pbn_exar_XR17C158] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 921600, + .uart_offset = 0x200, + }, +}; + +/* + * Given a complete unknown PCI device, try to use some heuristics to + * guess what the configuration might be, based on the pitiful PCI + * serial specs. Returns 0 on success, 1 on failure. + */ +static int __devinit +serial_pci_guess_board(struct pci_dev *dev, struct pci_board *board) +{ + int num_iomem, num_port, first_port = -1, i; + + /* + * If it is not a communications device or the programming + * interface is greater than 6, give up. + * + * (Should we try to make guesses for multiport serial devices + * later?) + */ + if ((((dev->class >> 8) != PCI_CLASS_COMMUNICATION_SERIAL) && + ((dev->class >> 8) != PCI_CLASS_COMMUNICATION_MODEM)) || + (dev->class & 0xff) > 6) + return -ENODEV; + + num_iomem = num_port = 0; + for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) { + if (pci_resource_flags(dev, i) & IORESOURCE_IO) { + num_port++; + if (first_port == -1) + first_port = i; + } + if (pci_resource_flags(dev, i) & IORESOURCE_MEM) + num_iomem++; + } + + /* + * If there is 1 or 0 iomem regions, and exactly one port, + * use it. We guess the number of ports based on the IO + * region size. + */ + if (num_iomem <= 1 && num_port == 1) { + board->flags = first_port; + board->num_ports = pci_resource_len(dev, first_port) / 8; + return 0; + } + + /* + * Now guess if we've got a board which indexes by BARs. + * Each IO BAR should be 8 bytes, and they should follow + * consecutively. + */ + first_port = -1; + num_port = 0; + for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) { + if (pci_resource_flags(dev, i) & IORESOURCE_IO && + pci_resource_len(dev, i) == 8 && + (first_port == -1 || (first_port + num_port) == i)) { + num_port++; + if (first_port == -1) + first_port = i; + } + } + + if (num_port > 1) { + board->flags = first_port | FL_BASE_BARS; + board->num_ports = num_port; + return 0; + } + + return -ENODEV; +} + +static inline int +serial_pci_matches(struct pci_board *board, struct pci_board *guessed) +{ + return + board->num_ports == guessed->num_ports && + board->base_baud == guessed->base_baud && + board->uart_offset == guessed->uart_offset && + board->reg_shift == guessed->reg_shift && + board->first_offset == guessed->first_offset; +} + +/* + * Probe one serial board. Unfortunately, there is no rhyme nor reason + * to the arrangement of serial ports on a PCI card. + */ +static int __devinit +pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent) +{ + struct serial_private *priv; + struct pci_board *board, tmp; + struct pci_serial_quirk *quirk; + int rc, nr_ports, i; + + if (ent->driver_data >= ARRAY_SIZE(pci_boards)) { + printk(KERN_ERR "pci_init_one: invalid driver_data: %ld\n", + ent->driver_data); + return -EINVAL; + } + + board = &pci_boards[ent->driver_data]; + + rc = pci_enable_device(dev); + if (rc) + return rc; + + if (ent->driver_data == pbn_default) { + /* + * Use a copy of the pci_board entry for this; + * avoid changing entries in the table. + */ + memcpy(&tmp, board, sizeof(struct pci_board)); + board = &tmp; + + /* + * We matched one of our class entries. Try to + * determine the parameters of this board. + */ + rc = serial_pci_guess_board(dev, board); + if (rc) + goto disable; + } else { + /* + * We matched an explicit entry. If we are able to + * detect this boards settings with our heuristic, + * then we no longer need this entry. + */ + memcpy(&tmp, &pci_boards[pbn_default], sizeof(struct pci_board)); + rc = serial_pci_guess_board(dev, &tmp); + if (rc == 0 && serial_pci_matches(board, &tmp)) + moan_device("Redundant entry in serial pci_table.", + dev); + } + + nr_ports = board->num_ports; + + /* + * Find an init and setup quirks. + */ + quirk = find_quirk(dev); + + /* + * Run the new-style initialization function. + * The initialization function returns: + * <0 - error + * 0 - use board->num_ports + * >0 - number of ports + */ + if (quirk->init) { + rc = quirk->init(dev); + if (rc < 0) + goto disable; + if (rc) + nr_ports = rc; + } + + priv = kmalloc(sizeof(struct serial_private) + + sizeof(unsigned int) * nr_ports, + GFP_KERNEL); + if (!priv) { + rc = -ENOMEM; + goto deinit; + } + + memset(priv, 0, sizeof(struct serial_private) + + sizeof(unsigned int) * nr_ports); + + priv->quirk = quirk; + pci_set_drvdata(dev, priv); + + for (i = 0; i < nr_ports; i++) { + struct uart_port serial_port; + memset(&serial_port, 0, sizeof(struct uart_port)); + + serial_port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | + UPF_SHARE_IRQ; + serial_port.uartclk = board->base_baud * 16; + serial_port.irq = get_pci_irq(dev, board, i); + serial_port.dev = &dev->dev; + if (quirk->setup(dev, board, &serial_port, i)) + break; +#ifdef SERIAL_DEBUG_PCI + printk("Setup PCI port: port %x, irq %d, type %d\n", + serial_port.iobase, serial_port.irq, serial_port.iotype); +#endif + + priv->line[i] = serial8250_register_port(&serial_port); + if (priv->line[i] < 0) { + printk(KERN_WARNING "Couldn't register serial port %s: %d\n", pci_name(dev), priv->line[i]); + break; + } + } + + priv->nr = i; + + return 0; + + deinit: + if (quirk->exit) + quirk->exit(dev); + disable: + pci_disable_device(dev); + return rc; +} + +static void __devexit pciserial_remove_one(struct pci_dev *dev) +{ + struct serial_private *priv = pci_get_drvdata(dev); + + pci_set_drvdata(dev, NULL); + + if (priv) { + struct pci_serial_quirk *quirk; + int i; + + for (i = 0; i < priv->nr; i++) + serial8250_unregister_port(priv->line[i]); + + for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) { + if (priv->remapped_bar[i]) + iounmap(priv->remapped_bar[i]); + priv->remapped_bar[i] = NULL; + } + + /* + * Find the exit quirks. + */ + quirk = find_quirk(dev); + if (quirk->exit) + quirk->exit(dev); + + pci_disable_device(dev); + + kfree(priv); + } +} + +static int pciserial_suspend_one(struct pci_dev *dev, pm_message_t state) +{ + struct serial_private *priv = pci_get_drvdata(dev); + + if (priv) { + int i; + + for (i = 0; i < priv->nr; i++) + serial8250_suspend_port(priv->line[i]); + } + pci_save_state(dev); + pci_set_power_state(dev, pci_choose_state(dev, state)); + return 0; +} + +static int pciserial_resume_one(struct pci_dev *dev) +{ + struct serial_private *priv = pci_get_drvdata(dev); + + pci_set_power_state(dev, PCI_D0); + pci_restore_state(dev); + + if (priv) { + int i; + + /* + * The device may have been disabled. Re-enable it. + */ + pci_enable_device(dev); + + /* + * Ensure that the board is correctly configured. + */ + if (priv->quirk->init) + priv->quirk->init(dev); + + for (i = 0; i < priv->nr; i++) + serial8250_resume_port(priv->line[i]); + } + return 0; +} + +static struct pci_device_id serial_pci_tbl[] = { + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0, + pbn_b1_8_1382400 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0, + pbn_b1_4_1382400 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0, + pbn_b1_2_1382400 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0, + pbn_b1_8_1382400 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0, + pbn_b1_4_1382400 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0, + pbn_b1_2_1382400 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485, 0, 0, + pbn_b1_8_921600 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_4_4, 0, 0, + pbn_b1_8_921600 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485, 0, 0, + pbn_b1_4_921600 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485_2_2, 0, 0, + pbn_b1_4_921600 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_485, 0, 0, + pbn_b1_2_921600 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_2_6, 0, 0, + pbn_b1_8_921600 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH081101V1, 0, 0, + pbn_b1_8_921600 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH041101V1, 0, 0, + pbn_b1_4_921600 }, + + { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_U530, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_1_115200 }, + { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM2, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_2_115200 }, + { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM422, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_4_115200 }, + { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM232, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_2_115200 }, + { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM4, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_4_115200 }, + { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM8, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_8_115200 }, + { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM8, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_8_115200 }, + + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_GTEK_SERIAL2, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_2_115200 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM200, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_2_921600 }, + /* + * VScom SPCOM800, from sl@s.pl + */ + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM800, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_8_921600 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_1077, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_4_921600 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_SUBVENDOR_ID_KEYSPAN, + PCI_SUBDEVICE_ID_KEYSPAN_SX2, 0, 0, + pbn_panacom }, + { PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_QUADMODEM, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_panacom4 }, + { PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_DUALMODEM, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_panacom2 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_SUBVENDOR_ID_CHASE_PCIFAST, + PCI_SUBDEVICE_ID_CHASE_PCIFAST4, 0, 0, + pbn_b2_4_460800 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_SUBVENDOR_ID_CHASE_PCIFAST, + PCI_SUBDEVICE_ID_CHASE_PCIFAST8, 0, 0, + pbn_b2_8_460800 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_SUBVENDOR_ID_CHASE_PCIFAST, + PCI_SUBDEVICE_ID_CHASE_PCIFAST16, 0, 0, + pbn_b2_16_460800 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_SUBVENDOR_ID_CHASE_PCIFAST, + PCI_SUBDEVICE_ID_CHASE_PCIFAST16FMC, 0, 0, + pbn_b2_16_460800 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_SUBVENDOR_ID_CHASE_PCIRAS, + PCI_SUBDEVICE_ID_CHASE_PCIRAS4, 0, 0, + pbn_b2_4_460800 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_SUBVENDOR_ID_CHASE_PCIRAS, + PCI_SUBDEVICE_ID_CHASE_PCIRAS8, 0, 0, + pbn_b2_8_460800 }, + /* + * Megawolf Romulus PCI Serial Card, from Mike Hudson + * (Exoray@isys.ca) + */ + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_ROMULUS, + 0x10b5, 0x106a, 0, 0, + pbn_plx_romulus }, + { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSC100, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_4_115200 }, + { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC100, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_2_115200 }, + { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100D, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_8_115200 }, + { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100M, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_8_115200 }, + { PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_OXSEMI_16PCI954, + PCI_VENDOR_ID_SPECIALIX, PCI_SUBDEVICE_ID_SPECIALIX_SPEED4, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_4_115200 }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI952, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_921600 }, + + /* + * SBS Technologies, Inc. P-Octal and PMC-OCTPRO cards, + * from skokodyn@yahoo.com + */ + { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO, + PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_OCTPRO232, 0, 0, + pbn_sbsxrsio }, + { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO, + PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_OCTPRO422, 0, 0, + pbn_sbsxrsio }, + { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO, + PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_POCTAL232, 0, 0, + pbn_sbsxrsio }, + { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO, + PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_POCTAL422, 0, 0, + pbn_sbsxrsio }, + + /* + * Digitan DS560-558, from jimd@esoft.com + */ + { PCI_VENDOR_ID_ATT, PCI_DEVICE_ID_ATT_VENUS_MODEM, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_1_115200 }, + + /* + * Titan Electronic cards + * The 400L and 800L have a custom setup quirk. + */ + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_2_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800B, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100L, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_1_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200L, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_bt_2_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400L, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_4_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800L, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_8_921600 }, + + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_550, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_1_460800 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_650, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_1_460800 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_850, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_1_460800 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_550, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_2_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_650, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_2_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_850, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_2_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_550, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_4_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_650, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_4_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_850, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_4_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_550, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_650, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_850, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_550, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_650, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_850, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_550, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_4_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_650, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_4_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_850, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_4_921600 }, + + /* + * Computone devices submitted by Doug McNash dmcnash@computone.com + */ + { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG, + PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG4, + 0, 0, pbn_computone_4 }, + { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG, + PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG8, + 0, 0, pbn_computone_8 }, + { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG, + PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG6, + 0, 0, pbn_computone_6 }, + + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI95N, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi }, + { PCI_VENDOR_ID_TIMEDIA, PCI_DEVICE_ID_TIMEDIA_1889, + PCI_VENDOR_ID_TIMEDIA, PCI_ANY_ID, 0, 0, + pbn_b0_bt_1_921600 }, + + /* + * AFAVLAB serial card, from Harald Welte <laforge@gnumonks.org> + */ + { PCI_VENDOR_ID_AFAVLAB, PCI_DEVICE_ID_AFAVLAB_P028, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_8_115200 }, + { PCI_VENDOR_ID_AFAVLAB, PCI_DEVICE_ID_AFAVLAB_P030, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_8_115200 }, + + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_DSERIAL, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_115200 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_A, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_115200 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_B, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_115200 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_A, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_4_460800 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_B, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_4_460800 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_PLUS, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_460800 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_A, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_460800 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_B, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_460800 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_SSERIAL, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_1_115200 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_650, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_1_460800 }, + + /* + * Dell Remote Access Card 4 - Tim_T_Murphy@Dell.com + */ + { PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_RAC4, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_1_1382400 }, + + /* + * Dell Remote Access Card III - Tim_T_Murphy@Dell.com + */ + { PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_RACIII, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_1_1382400 }, + + /* + * RAStel 2 port modem, gerg@moreton.com.au + */ + { PCI_VENDOR_ID_MORETON, PCI_DEVICE_ID_RASTEL_2PORT, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_2_115200 }, + + /* + * EKF addition for i960 Boards form EKF with serial port + */ + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80960_RP, + 0xE4BF, PCI_ANY_ID, 0, 0, + pbn_intel_i960 }, + + /* + * Xircom Cardbus/Ethernet combos + */ + { PCI_VENDOR_ID_XIRCOM, PCI_DEVICE_ID_XIRCOM_X3201_MDM, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_115200 }, + /* + * Xircom RBM56G cardbus modem - Dirk Arnold (temp entry) + */ + { PCI_VENDOR_ID_XIRCOM, PCI_DEVICE_ID_XIRCOM_RBM56G, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_115200 }, + + /* + * Untested PCI modems, sent in from various folks... + */ + + /* + * Elsa Model 56K PCI Modem, from Andreas Rath <arh@01019freenet.de> + */ + { PCI_VENDOR_ID_ROCKWELL, 0x1004, + 0x1048, 0x1500, 0, 0, + pbn_b1_1_115200 }, + + { PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3, + 0xFF00, 0, 0, 0, + pbn_sgi_ioc3 }, + + /* + * HP Diva card + */ + { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA, + PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_RMP3, 0, 0, + pbn_b1_1_115200 }, + { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_5_115200 }, + { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_AUX, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_1_115200 }, + + /* + * NEC Vrc-5074 (Nile 4) builtin UART. + */ + { PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_NILE4, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_nec_nile4 }, + + { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM4, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b3_4_115200 }, + { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM8, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b3_8_115200 }, + + /* + * Exar Corp. XR17C15[248] Dual/Quad/Octal UART + */ + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152, + PCI_ANY_ID, PCI_ANY_ID, + 0, + 0, pbn_exar_XR17C152 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154, + PCI_ANY_ID, PCI_ANY_ID, + 0, + 0, pbn_exar_XR17C154 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158, + PCI_ANY_ID, PCI_ANY_ID, + 0, + 0, pbn_exar_XR17C158 }, + + /* + * Topic TP560 Data/Fax/Voice 56k modem (reported by Evan Clarke) + */ + { PCI_VENDOR_ID_TOPIC, PCI_DEVICE_ID_TOPIC_TP560, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_115200 }, + + /* + * These entries match devices with class COMMUNICATION_SERIAL, + * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL + */ + { PCI_ANY_ID, PCI_ANY_ID, + PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_COMMUNICATION_SERIAL << 8, + 0xffff00, pbn_default }, + { PCI_ANY_ID, PCI_ANY_ID, + PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_COMMUNICATION_MODEM << 8, + 0xffff00, pbn_default }, + { PCI_ANY_ID, PCI_ANY_ID, + PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_COMMUNICATION_MULTISERIAL << 8, + 0xffff00, pbn_default }, + { 0, } +}; + +static struct pci_driver serial_pci_driver = { + .name = "serial", + .probe = pciserial_init_one, + .remove = __devexit_p(pciserial_remove_one), + .suspend = pciserial_suspend_one, + .resume = pciserial_resume_one, + .id_table = serial_pci_tbl, +}; + +static int __init serial8250_pci_init(void) +{ + return pci_register_driver(&serial_pci_driver); +} + +static void __exit serial8250_pci_exit(void) +{ + pci_unregister_driver(&serial_pci_driver); +} + +module_init(serial8250_pci_init); +module_exit(serial8250_pci_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Generic 8250/16x50 PCI serial probe module"); +MODULE_DEVICE_TABLE(pci, serial_pci_tbl); |