diff options
Diffstat (limited to 'drivers/scsi')
94 files changed, 9870 insertions, 3165 deletions
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index c7f06298bd3..403ecad48d4 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -63,7 +63,7 @@ comment "SCSI support type (disk, tape, CD-ROM)" config BLK_DEV_SD tristate "SCSI disk support" depends on SCSI - select CRC_T10DIF + select CRC_T10DIF if BLK_DEV_INTEGRITY ---help--- If you want to use SCSI hard disks, Fibre Channel disks, Serial ATA (SATA) or Parallel ATA (PATA) hard disks, @@ -1325,14 +1325,6 @@ config SCSI_QLOGIC_FAS To compile this driver as a module, choose M here: the module will be called qlogicfas. -config SCSI_QLOGIC_FC_FIRMWARE - bool "Include loadable firmware in driver" - depends on SCSI_QLOGIC_FC - help - Say Y to include ISP2X00 Fabric Initiator/Target Firmware, with - expanded LUN addressing and FcTape (FCP-2) support, in the - qlogicfc driver. This is required on some platforms. - config SCSI_QLOGIC_1280 tristate "Qlogic QLA 1240/1x80/1x160 SCSI support" depends on PCI && SCSI @@ -1648,6 +1640,7 @@ config ATARI_SCSI tristate "Atari native SCSI support" depends on ATARI && SCSI select SCSI_SPI_ATTRS + select NVRAM ---help--- If you have an Atari with built-in NCR5380 SCSI controller (TT, Falcon, ...) say Y to get it supported. Of course also, if you have @@ -1678,14 +1671,6 @@ config ATARI_SCSI_RESET_BOOT boot process fractionally longer but may assist recovery from errors that leave the devices with SCSI operations partway completed. -config TT_DMA_EMUL - bool "Hades SCSI DMA emulator" - depends on ATARI_SCSI && HADES - help - This option enables code which emulates the TT SCSI DMA chip on the - Hades. This increases the SCSI transfer rates at least ten times - compared to PIO transfers. - config MAC_SCSI bool "Macintosh NCR5380 SCSI" depends on MAC && SCSI=y diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c index aa4e77c2527..8abfd06b5a7 100644 --- a/drivers/scsi/aacraid/aachba.c +++ b/drivers/scsi/aacraid/aachba.c @@ -1139,7 +1139,7 @@ static struct aac_srb * aac_scsi_common(struct fib * fib, struct scsi_cmnd * cmd srbcmd->id = cpu_to_le32(scmd_id(cmd)); srbcmd->lun = cpu_to_le32(cmd->device->lun); srbcmd->flags = cpu_to_le32(flag); - timeout = cmd->timeout_per_command/HZ; + timeout = cmd->request->timeout/HZ; if (timeout == 0) timeout = 1; srbcmd->timeout = cpu_to_le32(timeout); // timeout in seconds diff --git a/drivers/scsi/atari_dma_emul.c b/drivers/scsi/atari_dma_emul.c deleted file mode 100644 index cdc710ea00f..00000000000 --- a/drivers/scsi/atari_dma_emul.c +++ /dev/null @@ -1,468 +0,0 @@ -/* - * atari_dma_emul.c -- TT SCSI DMA emulator for the Hades. - * - * Copyright 1997 Wout Klaren <W.Klaren@inter.nl.net> - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive - * for more details. - * - * This code was written using the Hades TOS source code as a - * reference. This source code can be found on the home page - * of Medusa Computer Systems. - * - * Version 0.1, 1997-09-24. - * - * This code should be considered experimental. It has only been - * tested on a Hades with a 68060. It might not work on a Hades - * with a 68040. Make backups of your hard drives before using - * this code. - */ - -#include <linux/compiler.h> -#include <asm/thread_info.h> -#include <asm/uaccess.h> - -#define hades_dma_ctrl (*(unsigned char *) 0xffff8717) -#define hades_psdm_reg (*(unsigned char *) 0xffff8741) - -#define TRANSFER_SIZE 16 - -struct m68040_frame { - unsigned long effaddr; /* effective address */ - unsigned short ssw; /* special status word */ - unsigned short wb3s; /* write back 3 status */ - unsigned short wb2s; /* write back 2 status */ - unsigned short wb1s; /* write back 1 status */ - unsigned long faddr; /* fault address */ - unsigned long wb3a; /* write back 3 address */ - unsigned long wb3d; /* write back 3 data */ - unsigned long wb2a; /* write back 2 address */ - unsigned long wb2d; /* write back 2 data */ - unsigned long wb1a; /* write back 1 address */ - unsigned long wb1dpd0; /* write back 1 data/push data 0*/ - unsigned long pd1; /* push data 1*/ - unsigned long pd2; /* push data 2*/ - unsigned long pd3; /* push data 3*/ -}; - -static void writeback (unsigned short wbs, unsigned long wba, - unsigned long wbd, void *old_buserr) -{ - mm_segment_t fs = get_fs(); - static void *save_buserr; - - __asm__ __volatile__ ("movec.l %%vbr,%%a0\n\t" - "move.l %0,8(%%a0)\n\t" - : - : "r" (&&bus_error) - : "a0" ); - - save_buserr = old_buserr; - - set_fs (MAKE_MM_SEG(wbs & WBTM_040)); - - switch (wbs & WBSIZ_040) { - case BA_SIZE_BYTE: - put_user (wbd & 0xff, (char *)wba); - break; - case BA_SIZE_WORD: - put_user (wbd & 0xffff, (short *)wba); - break; - case BA_SIZE_LONG: - put_user (wbd, (int *)wba); - break; - } - - set_fs (fs); - return; - -bus_error: - __asm__ __volatile__ ("cmp.l %0,2(%%sp)\n\t" - "bcs.s .jump_old\n\t" - "cmp.l %1,2(%%sp)\n\t" - "bls.s .restore_old\n" - ".jump_old:\n\t" - "move.l %2,-(%%sp)\n\t" - "rts\n" - ".restore_old:\n\t" - "move.l %%a0,-(%%sp)\n\t" - "movec.l %%vbr,%%a0\n\t" - "move.l %2,8(%%a0)\n\t" - "move.l (%%sp)+,%%a0\n\t" - "rte\n\t" - : - : "i" (writeback), "i" (&&bus_error), - "m" (save_buserr) ); -} - -/* - * static inline void set_restdata_reg(unsigned char *cur_addr) - * - * Set the rest data register if necessary. - */ - -static inline void set_restdata_reg(unsigned char *cur_addr) -{ - if (((long) cur_addr & ~3) != 0) - tt_scsi_dma.dma_restdata = - *((unsigned long *) ((long) cur_addr & ~3)); -} - -/* - * void hades_dma_emulator(int irq, void *dummy) - * - * This code emulates TT SCSI DMA on the Hades. - * - * Note the following: - * - * 1. When there is no byte available to read from the SCSI bus, or - * when a byte cannot yet bet written to the SCSI bus, a bus - * error occurs when reading or writing the pseudo DMA data - * register (hades_psdm_reg). We have to catch this bus error - * and try again to read or write the byte. If after several tries - * we still get a bus error, the interrupt handler is left. When - * the byte can be read or written, the interrupt handler is - * called again. - * - * 2. The SCSI interrupt must be disabled in this interrupt handler. - * - * 3. If we set the EOP signal, the SCSI controller still expects one - * byte to be read or written. Therefore the last byte is transferred - * separately, after setting the EOP signal. - * - * 4. When this function is left, the address pointer (start_addr) is - * converted to a physical address. Because it points one byte - * further than the last transferred byte, it can point outside the - * current page. If virt_to_phys() is called with this address we - * might get an access error. Therefore virt_to_phys() is called with - * start_addr - 1 if the count has reached zero. The result is - * increased with one. - */ - -static irqreturn_t hades_dma_emulator(int irq, void *dummy) -{ - unsigned long dma_base; - register unsigned long dma_cnt asm ("d3"); - static long save_buserr; - register unsigned long save_sp asm ("d4"); - register int tries asm ("d5"); - register unsigned char *start_addr asm ("a3"), *end_addr asm ("a4"); - register unsigned char *eff_addr; - register unsigned char *psdm_reg; - unsigned long rem; - - atari_disable_irq(IRQ_TT_MFP_SCSI); - - /* - * Read the dma address and count registers. - */ - - dma_base = SCSI_DMA_READ_P(dma_addr); - dma_cnt = SCSI_DMA_READ_P(dma_cnt); - - /* - * Check if DMA is still enabled. - */ - - if ((tt_scsi_dma.dma_ctrl & 2) == 0) - { - atari_enable_irq(IRQ_TT_MFP_SCSI); - return IRQ_HANDLED; - } - - if (dma_cnt == 0) - { - printk(KERN_NOTICE "DMA emulation: count is zero.\n"); - tt_scsi_dma.dma_ctrl &= 0xfd; /* DMA ready. */ - atari_enable_irq(IRQ_TT_MFP_SCSI); - return IRQ_HANDLED; - } - - /* - * Install new bus error routine. - */ - - __asm__ __volatile__ ("movec.l %%vbr,%%a0\n\t" - "move.l 8(%%a0),%0\n\t" - "move.l %1,8(%%a0)\n\t" - : "=&r" (save_buserr) - : "r" (&&scsi_bus_error) - : "a0" ); - - hades_dma_ctrl &= 0xfc; /* Bus error and EOP off. */ - - /* - * Save the stack pointer. - */ - - __asm__ __volatile__ ("move.l %%sp,%0\n\t" - : "=&r" (save_sp) ); - - tries = 100; /* Maximum number of bus errors. */ - start_addr = phys_to_virt(dma_base); - end_addr = start_addr + dma_cnt; - -scsi_loop: - dma_cnt--; - rem = dma_cnt & (TRANSFER_SIZE - 1); - dma_cnt &= ~(TRANSFER_SIZE - 1); - psdm_reg = &hades_psdm_reg; - - if (tt_scsi_dma.dma_ctrl & 1) /* Read or write? */ - { - /* - * SCSI write. Abort when count is zero. - */ - - switch (rem) - { - case 0: - while (dma_cnt > 0) - { - dma_cnt -= TRANSFER_SIZE; - - *psdm_reg = *start_addr++; - case 15: - *psdm_reg = *start_addr++; - case 14: - *psdm_reg = *start_addr++; - case 13: - *psdm_reg = *start_addr++; - case 12: - *psdm_reg = *start_addr++; - case 11: - *psdm_reg = *start_addr++; - case 10: - *psdm_reg = *start_addr++; - case 9: - *psdm_reg = *start_addr++; - case 8: - *psdm_reg = *start_addr++; - case 7: - *psdm_reg = *start_addr++; - case 6: - *psdm_reg = *start_addr++; - case 5: - *psdm_reg = *start_addr++; - case 4: - *psdm_reg = *start_addr++; - case 3: - *psdm_reg = *start_addr++; - case 2: - *psdm_reg = *start_addr++; - case 1: - *psdm_reg = *start_addr++; - } - } - - hades_dma_ctrl |= 1; /* Set EOP. */ - udelay(10); - *psdm_reg = *start_addr++; /* Dummy byte. */ - tt_scsi_dma.dma_ctrl &= 0xfd; /* DMA ready. */ - } - else - { - /* - * SCSI read. Abort when count is zero. - */ - - switch (rem) - { - case 0: - while (dma_cnt > 0) - { - dma_cnt -= TRANSFER_SIZE; - - *start_addr++ = *psdm_reg; - case 15: - *start_addr++ = *psdm_reg; - case 14: - *start_addr++ = *psdm_reg; - case 13: - *start_addr++ = *psdm_reg; - case 12: - *start_addr++ = *psdm_reg; - case 11: - *start_addr++ = *psdm_reg; - case 10: - *start_addr++ = *psdm_reg; - case 9: - *start_addr++ = *psdm_reg; - case 8: - *start_addr++ = *psdm_reg; - case 7: - *start_addr++ = *psdm_reg; - case 6: - *start_addr++ = *psdm_reg; - case 5: - *start_addr++ = *psdm_reg; - case 4: - *start_addr++ = *psdm_reg; - case 3: - *start_addr++ = *psdm_reg; - case 2: - *start_addr++ = *psdm_reg; - case 1: - *start_addr++ = *psdm_reg; - } - } - - hades_dma_ctrl |= 1; /* Set EOP. */ - udelay(10); - *start_addr++ = *psdm_reg; - tt_scsi_dma.dma_ctrl &= 0xfd; /* DMA ready. */ - - set_restdata_reg(start_addr); - } - - if (start_addr != end_addr) - printk(KERN_CRIT "DMA emulation: FATAL: Count is not zero at end of transfer.\n"); - - dma_cnt = end_addr - start_addr; - -scsi_end: - dma_base = (dma_cnt == 0) ? virt_to_phys(start_addr - 1) + 1 : - virt_to_phys(start_addr); - - SCSI_DMA_WRITE_P(dma_addr, dma_base); - SCSI_DMA_WRITE_P(dma_cnt, dma_cnt); - - /* - * Restore old bus error routine. - */ - - __asm__ __volatile__ ("movec.l %%vbr,%%a0\n\t" - "move.l %0,8(%%a0)\n\t" - : - : "r" (save_buserr) - : "a0" ); - - atari_enable_irq(IRQ_TT_MFP_SCSI); - - return IRQ_HANDLED; - -scsi_bus_error: - /* - * First check if the bus error is caused by our code. - * If not, call the original handler. - */ - - __asm__ __volatile__ ("cmp.l %0,2(%%sp)\n\t" - "bcs.s .old_vector\n\t" - "cmp.l %1,2(%%sp)\n\t" - "bls.s .scsi_buserr\n" - ".old_vector:\n\t" - "move.l %2,-(%%sp)\n\t" - "rts\n" - ".scsi_buserr:\n\t" - : - : "i" (&&scsi_loop), "i" (&&scsi_end), - "m" (save_buserr) ); - - if (CPU_IS_060) - { - /* - * Get effective address and restore the stack. - */ - - __asm__ __volatile__ ("move.l 8(%%sp),%0\n\t" - "move.l %1,%%sp\n\t" - : "=a&" (eff_addr) - : "r" (save_sp) ); - } - else - { - register struct m68040_frame *frame; - - __asm__ __volatile__ ("lea 8(%%sp),%0\n\t" - : "=a&" (frame) ); - - if (tt_scsi_dma.dma_ctrl & 1) - { - /* - * Bus error while writing. - */ - - if (frame->wb3s & WBV_040) - { - if (frame->wb3a == (long) &hades_psdm_reg) - start_addr--; - else - writeback(frame->wb3s, frame->wb3a, - frame->wb3d, &&scsi_bus_error); - } - - if (frame->wb2s & WBV_040) - { - if (frame->wb2a == (long) &hades_psdm_reg) - start_addr--; - else - writeback(frame->wb2s, frame->wb2a, - frame->wb2d, &&scsi_bus_error); - } - - if (frame->wb1s & WBV_040) - { - if (frame->wb1a == (long) &hades_psdm_reg) - start_addr--; - } - } - else - { - /* - * Bus error while reading. - */ - - if (frame->wb3s & WBV_040) - writeback(frame->wb3s, frame->wb3a, - frame->wb3d, &&scsi_bus_error); - } - - eff_addr = (unsigned char *) frame->faddr; - - __asm__ __volatile__ ("move.l %0,%%sp\n\t" - : - : "r" (save_sp) ); - } - - dma_cnt = end_addr - start_addr; - - if (eff_addr == &hades_psdm_reg) - { - /* - * Bus error occurred while reading the pseudo - * DMA register. Time out. - */ - - tries--; - - if (tries <= 0) - { - if ((tt_scsi_dma.dma_ctrl & 1) == 0) /* Read or write? */ - set_restdata_reg(start_addr); - - if (dma_cnt <= 1) - printk(KERN_CRIT "DMA emulation: Fatal " - "error while %s the last byte.\n", - (tt_scsi_dma.dma_ctrl & 1) - ? "writing" : "reading"); - - goto scsi_end; - } - else - goto scsi_loop; - } - else - { - /* - * Bus error during pseudo DMA transfer. - * Terminate the DMA transfer. - */ - - hades_dma_ctrl |= 3; /* Set EOP and bus error. */ - if ((tt_scsi_dma.dma_ctrl & 1) == 0) /* Read or write? */ - set_restdata_reg(start_addr); - goto scsi_end; - } -} diff --git a/drivers/scsi/atari_scsi.c b/drivers/scsi/atari_scsi.c index f5732d8f67f..21fe07f9df8 100644 --- a/drivers/scsi/atari_scsi.c +++ b/drivers/scsi/atari_scsi.c @@ -249,10 +249,6 @@ static int setup_hostid = -1; module_param(setup_hostid, int, 0); -#if defined(CONFIG_TT_DMA_EMUL) -#include "atari_dma_emul.c" -#endif - #if defined(REAL_DMA) static int scsi_dma_is_ignored_buserr(unsigned char dma_stat) @@ -695,21 +691,8 @@ int atari_scsi_detect(struct scsi_host_template *host) #ifdef REAL_DMA tt_scsi_dma.dma_ctrl = 0; atari_dma_residual = 0; -#ifdef CONFIG_TT_DMA_EMUL - if (MACH_IS_HADES) { - if (request_irq(IRQ_AUTO_2, hades_dma_emulator, - IRQ_TYPE_PRIO, "Hades DMA emulator", - hades_dma_emulator)) { - printk(KERN_ERR "atari_scsi_detect: cannot allocate irq %d, aborting (MACH_IS_HADES)",IRQ_AUTO_2); - free_irq(IRQ_TT_MFP_SCSI, instance); - scsi_unregister(atari_scsi_host); - atari_stram_free(atari_dma_buffer); - atari_dma_buffer = 0; - return 0; - } - } -#endif - if (MACH_IS_MEDUSA || MACH_IS_HADES) { + + if (MACH_IS_MEDUSA) { /* While the read overruns (described by Drew Eckhardt in * NCR5380.c) never happened on TTs, they do in fact on the Medusa * (This was the cause why SCSI didn't work right for so long @@ -1007,11 +990,7 @@ static unsigned long atari_dma_xfer_len(unsigned long wanted_len, Scsi_Cmnd *cmd, int write_flag) { unsigned long possible_len, limit; -#ifndef CONFIG_TT_DMA_EMUL - if (MACH_IS_HADES) - /* Hades has no SCSI DMA at all :-( Always force use of PIO */ - return 0; -#endif + if (IS_A_TT()) /* TT SCSI DMA can transfer arbitrary #bytes */ return wanted_len; diff --git a/drivers/scsi/ch.c b/drivers/scsi/ch.c index 3c257fe0893..88ecf94ad97 100644 --- a/drivers/scsi/ch.c +++ b/drivers/scsi/ch.c @@ -914,9 +914,9 @@ static int ch_probe(struct device *dev) ch->minor = minor; sprintf(ch->name,"ch%d",ch->minor); - class_dev = device_create_drvdata(ch_sysfs_class, dev, - MKDEV(SCSI_CHANGER_MAJOR, ch->minor), - ch, "s%s", ch->name); + class_dev = device_create(ch_sysfs_class, dev, + MKDEV(SCSI_CHANGER_MAJOR, ch->minor), ch, + "s%s", ch->name); if (IS_ERR(class_dev)) { printk(KERN_WARNING "ch%d: device_create failed\n", ch->minor); diff --git a/drivers/scsi/constants.c b/drivers/scsi/constants.c index 9785d738419..4003deefb7d 100644 --- a/drivers/scsi/constants.c +++ b/drivers/scsi/constants.c @@ -1364,7 +1364,8 @@ EXPORT_SYMBOL(scsi_print_sense); static const char * const hostbyte_table[]={ "DID_OK", "DID_NO_CONNECT", "DID_BUS_BUSY", "DID_TIME_OUT", "DID_BAD_TARGET", "DID_ABORT", "DID_PARITY", "DID_ERROR", "DID_RESET", "DID_BAD_INTR", -"DID_PASSTHROUGH", "DID_SOFT_ERROR", "DID_IMM_RETRY", "DID_REQUEUE"}; +"DID_PASSTHROUGH", "DID_SOFT_ERROR", "DID_IMM_RETRY", "DID_REQUEUE", +"DID_TRANSPORT_DISRUPTED", "DID_TRANSPORT_FAILFAST" }; #define NUM_HOSTBYTE_STRS ARRAY_SIZE(hostbyte_table) static const char * const driverbyte_table[]={ diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c index 994da56fffe..e356b43753f 100644 --- a/drivers/scsi/device_handler/scsi_dh_alua.c +++ b/drivers/scsi/device_handler/scsi_dh_alua.c @@ -109,7 +109,8 @@ static struct request *get_alua_req(struct scsi_device *sdev, } rq->cmd_type = REQ_TYPE_BLOCK_PC; - rq->cmd_flags |= REQ_FAILFAST | REQ_NOMERGE; + rq->cmd_flags |= REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | + REQ_FAILFAST_DRIVER; rq->retries = ALUA_FAILOVER_RETRIES; rq->timeout = ALUA_FAILOVER_TIMEOUT; @@ -425,7 +426,7 @@ static int alua_check_sense(struct scsi_device *sdev, /* * LUN Not Accessible - ALUA state transition */ - return NEEDS_RETRY; + return ADD_TO_MLQUEUE; if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x0b) /* * LUN Not Accessible -- Target port in standby state @@ -447,18 +448,18 @@ static int alua_check_sense(struct scsi_device *sdev, /* * Power On, Reset, or Bus Device Reset, just retry. */ - return NEEDS_RETRY; + return ADD_TO_MLQUEUE; if (sense_hdr->asc == 0x2a && sense_hdr->ascq == 0x06) { /* * ALUA state changed */ - return NEEDS_RETRY; + return ADD_TO_MLQUEUE; } if (sense_hdr->asc == 0x2a && sense_hdr->ascq == 0x07) { /* * Implicit ALUA state transition failed */ - return NEEDS_RETRY; + return ADD_TO_MLQUEUE; } break; } @@ -490,7 +491,7 @@ static int alua_stpg(struct scsi_device *sdev, int state, if (!err) return SCSI_DH_IO; err = alua_check_sense(sdev, &sense_hdr); - if (retry > 0 && err == NEEDS_RETRY) { + if (retry > 0 && err == ADD_TO_MLQUEUE) { retry--; goto retry; } @@ -535,7 +536,7 @@ static int alua_rtpg(struct scsi_device *sdev, struct alua_dh_data *h) return SCSI_DH_IO; err = alua_check_sense(sdev, &sense_hdr); - if (err == NEEDS_RETRY) + if (err == ADD_TO_MLQUEUE) goto retry; sdev_printk(KERN_INFO, sdev, "%s: rtpg sense code %02x/%02x/%02x\n", diff --git a/drivers/scsi/device_handler/scsi_dh_emc.c b/drivers/scsi/device_handler/scsi_dh_emc.c index b9d23e9e9a4..0e572d2c5b0 100644 --- a/drivers/scsi/device_handler/scsi_dh_emc.c +++ b/drivers/scsi/device_handler/scsi_dh_emc.c @@ -84,7 +84,7 @@ struct clariion_dh_data { /* * I/O buffer for both MODE_SELECT and INQUIRY commands. */ - char buffer[CLARIION_BUFFER_SIZE]; + unsigned char buffer[CLARIION_BUFFER_SIZE]; /* * SCSI sense buffer for commands -- assumes serial issuance * and completion sequence of all commands for same multipath. @@ -176,7 +176,7 @@ static int parse_sp_info_reply(struct scsi_device *sdev, err = SCSI_DH_DEV_TEMP_BUSY; goto out; } - if (csdev->buffer[4] < 0 || csdev->buffer[4] > 2) { + if (csdev->buffer[4] > 2) { /* Invalid buffer format */ sdev_printk(KERN_NOTICE, sdev, "%s: invalid VPD page 0xC0 format\n", @@ -278,7 +278,6 @@ static struct request *get_req(struct scsi_device *sdev, int cmd, return NULL; } - memset(rq->cmd, 0, BLK_MAX_CDB); rq->cmd_len = COMMAND_SIZE(cmd); rq->cmd[0] = cmd; @@ -304,7 +303,8 @@ static struct request *get_req(struct scsi_device *sdev, int cmd, rq->cmd[4] = len; rq->cmd_type = REQ_TYPE_BLOCK_PC; - rq->cmd_flags |= REQ_FAILFAST; + rq->cmd_flags |= REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | + REQ_FAILFAST_DRIVER; rq->timeout = CLARIION_TIMEOUT; rq->retries = CLARIION_RETRIES; @@ -439,7 +439,7 @@ static int clariion_check_sense(struct scsi_device *sdev, * Unit Attention Code. This is the first IO * to the new path, so just retry. */ - return NEEDS_RETRY; + return ADD_TO_MLQUEUE; break; } @@ -514,7 +514,7 @@ retry: return SCSI_DH_IO; err = clariion_check_sense(sdev, &sshdr); - if (retry > 0 && err == NEEDS_RETRY) { + if (retry > 0 && err == ADD_TO_MLQUEUE) { retry--; goto retry; } diff --git a/drivers/scsi/device_handler/scsi_dh_hp_sw.c b/drivers/scsi/device_handler/scsi_dh_hp_sw.c index a6a4ef3ad51..9aec4ca64e5 100644 --- a/drivers/scsi/device_handler/scsi_dh_hp_sw.c +++ b/drivers/scsi/device_handler/scsi_dh_hp_sw.c @@ -112,9 +112,9 @@ static int hp_sw_tur(struct scsi_device *sdev, struct hp_sw_dh_data *h) return SCSI_DH_RES_TEMP_UNAVAIL; req->cmd_type = REQ_TYPE_BLOCK_PC; - req->cmd_flags |= REQ_FAILFAST; + req->cmd_flags |= REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | + REQ_FAILFAST_DRIVER; req->cmd_len = COMMAND_SIZE(TEST_UNIT_READY); - memset(req->cmd, 0, MAX_COMMAND_SIZE); req->cmd[0] = TEST_UNIT_READY; req->timeout = HP_SW_TIMEOUT; req->sense = h->sense; @@ -205,9 +205,9 @@ static int hp_sw_start_stop(struct scsi_device *sdev, struct hp_sw_dh_data *h) return SCSI_DH_RES_TEMP_UNAVAIL; req->cmd_type = REQ_TYPE_BLOCK_PC; - req->cmd_flags |= REQ_FAILFAST; + req->cmd_flags |= REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | + REQ_FAILFAST_DRIVER; req->cmd_len = COMMAND_SIZE(START_STOP); - memset(req->cmd, 0, MAX_COMMAND_SIZE); req->cmd[0] = START_STOP; req->cmd[4] = 1; /* Start spin cycle */ req->timeout = HP_SW_TIMEOUT; diff --git a/drivers/scsi/device_handler/scsi_dh_rdac.c b/drivers/scsi/device_handler/scsi_dh_rdac.c index 2dee69da35c..a43c3ed4df2 100644 --- a/drivers/scsi/device_handler/scsi_dh_rdac.c +++ b/drivers/scsi/device_handler/scsi_dh_rdac.c @@ -225,10 +225,9 @@ static struct request *get_rdac_req(struct scsi_device *sdev, return NULL; } - memset(rq->cmd, 0, BLK_MAX_CDB); - rq->cmd_type = REQ_TYPE_BLOCK_PC; - rq->cmd_flags |= REQ_FAILFAST | REQ_NOMERGE; + rq->cmd_flags |= REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | + REQ_FAILFAST_DRIVER; rq->retries = RDAC_RETRIES; rq->timeout = RDAC_TIMEOUT; @@ -551,7 +550,7 @@ static int rdac_check_sense(struct scsi_device *sdev, * * Just retry and wait. */ - return NEEDS_RETRY; + return ADD_TO_MLQUEUE; break; case ILLEGAL_REQUEST: if (sense_hdr->asc == 0x94 && sense_hdr->ascq == 0x01) { @@ -568,7 +567,7 @@ static int rdac_check_sense(struct scsi_device *sdev, /* * Power On, Reset, or Bus Device Reset, just retry. */ - return NEEDS_RETRY; + return ADD_TO_MLQUEUE; break; } /* success just means we do not care what scsi-ml does */ @@ -590,6 +589,8 @@ static const struct scsi_dh_devlist rdac_dev_list[] = { {"STK", "OPENstorage D280"}, {"SUN", "CSM200_R"}, {"SUN", "LCSM100_F"}, + {"DELL", "MD3000"}, + {"DELL", "MD3000i"}, {NULL, NULL}, }; diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c index 1fe0901e811..8aba4fdfb52 100644 --- a/drivers/scsi/dpt_i2o.c +++ b/drivers/scsi/dpt_i2o.c @@ -271,7 +271,7 @@ rebuild_sys_tab: pHba->initialized = TRUE; pHba->state &= ~DPTI_STATE_RESET; if (adpt_sysfs_class) { - struct device *dev = device_create_drvdata(adpt_sysfs_class, + struct device *dev = device_create(adpt_sysfs_class, NULL, MKDEV(DPTI_I2O_MAJOR, pHba->unit), NULL, "dpti%d", pHba->unit); if (IS_ERR(dev)) { diff --git a/drivers/scsi/esp_scsi.h b/drivers/scsi/esp_scsi.h index bb43a138818..28e22acf87e 100644 --- a/drivers/scsi/esp_scsi.h +++ b/drivers/scsi/esp_scsi.h @@ -521,7 +521,8 @@ struct esp { struct completion *eh_reset; - struct sbus_dma *dma; + void *dma; + int dmarev; }; /* A front-end driver for the ESP chip should do the following in diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c index 822d5214692..c387c15a212 100644 --- a/drivers/scsi/gdth.c +++ b/drivers/scsi/gdth.c @@ -464,7 +464,6 @@ int __gdth_execute(struct scsi_device *sdev, gdth_cmd_str *gdtcmd, char *cmnd, /* use request field to save the ptr. to completion struct. */ scp->request = (struct request *)&wait; - scp->timeout_per_command = timeout*HZ; scp->cmd_len = 12; scp->cmnd = cmnd; cmndinfo.priority = IOCTL_PRI; @@ -1995,23 +1994,12 @@ static void gdth_putq(gdth_ha_str *ha, Scsi_Cmnd *scp, unchar priority) register Scsi_Cmnd *pscp; register Scsi_Cmnd *nscp; ulong flags; - unchar b, t; TRACE(("gdth_putq() priority %d\n",priority)); spin_lock_irqsave(&ha->smp_lock, flags); - if (!cmndinfo->internal_command) { + if (!cmndinfo->internal_command) cmndinfo->priority = priority; - b = scp->device->channel; - t = scp->device->id; - if (priority >= DEFAULT_PRI) { - if ((b != ha->virt_bus && ha->raw[BUS_L2P(ha,b)].lock) || - (b==ha->virt_bus && t<MAX_HDRIVES && ha->hdr[t].lock)) { - TRACE2(("gdth_putq(): locked IO ->update_timeout()\n")); - cmndinfo->timeout = gdth_update_timeout(scp, 0); - } - } - } if (ha->req_first==NULL) { ha->req_first = scp; /* queue was empty */ @@ -3899,6 +3887,39 @@ static const char *gdth_info(struct Scsi_Host *shp) return ((const char *)ha->binfo.type_string); } +static enum blk_eh_timer_return gdth_timed_out(struct scsi_cmnd *scp) +{ + gdth_ha_str *ha = shost_priv(scp->device->host); + struct gdth_cmndinfo *cmndinfo = gdth_cmnd_priv(scp); + unchar b, t; + ulong flags; + enum blk_eh_timer_return retval = BLK_EH_NOT_HANDLED; + + TRACE(("%s() cmd 0x%x\n", scp->cmnd[0], __func__)); + b = scp->device->channel; + t = scp->device->id; + + /* + * We don't really honor the command timeout, but we try to + * honor 6 times of the actual command timeout! So reset the + * timer if this is less than 6th timeout on this command! + */ + if (++cmndinfo->timeout_count < 6) + retval = BLK_EH_RESET_TIMER; + + /* Reset the timeout if it is locked IO */ + spin_lock_irqsave(&ha->smp_lock, flags); + if ((b != ha->virt_bus && ha->raw[BUS_L2P(ha, b)].lock) || + (b == ha->virt_bus && t < MAX_HDRIVES && ha->hdr[t].lock)) { + TRACE2(("%s(): locked IO, reset timeout\n", __func__)); + retval = BLK_EH_RESET_TIMER; + } + spin_unlock_irqrestore(&ha->smp_lock, flags); + + return retval; +} + + static int gdth_eh_bus_reset(Scsi_Cmnd *scp) { gdth_ha_str *ha = shost_priv(scp->device->host); @@ -3992,7 +4013,7 @@ static int gdth_queuecommand(struct scsi_cmnd *scp, BUG_ON(!cmndinfo); scp->scsi_done = done; - gdth_update_timeout(scp, scp->timeout_per_command * 6); + cmndinfo->timeout_count = 0; cmndinfo->priority = DEFAULT_PRI; return __gdth_queuecommand(ha, scp, cmndinfo); @@ -4096,12 +4117,10 @@ static int ioc_lockdrv(void __user *arg) ha->hdr[j].lock = 1; spin_unlock_irqrestore(&ha->smp_lock, flags); gdth_wait_completion(ha, ha->bus_cnt, j); - gdth_stop_timeout(ha, ha->bus_cnt, j); } else { spin_lock_irqsave(&ha->smp_lock, flags); ha->hdr[j].lock = 0; spin_unlock_irqrestore(&ha->smp_lock, flags); - gdth_start_timeout(ha, ha->bus_cnt, j); gdth_next(ha); } } @@ -4539,18 +4558,14 @@ static int gdth_ioctl(struct inode *inode, struct file *filep, spin_lock_irqsave(&ha->smp_lock, flags); ha->raw[i].lock = 1; spin_unlock_irqrestore(&ha->smp_lock, flags); - for (j = 0; j < ha->tid_cnt; ++j) { + for (j = 0; j < ha->tid_cnt; ++j) gdth_wait_completion(ha, i, j); - gdth_stop_timeout(ha, i, j); - } } else { spin_lock_irqsave(&ha->smp_lock, flags); ha->raw[i].lock = 0; spin_unlock_irqrestore(&ha->smp_lock, flags); - for (j = 0; j < ha->tid_cnt; ++j) { - gdth_start_timeout(ha, i, j); + for (j = 0; j < ha->tid_cnt; ++j) gdth_next(ha); - } } } break; @@ -4644,6 +4659,7 @@ static struct scsi_host_template gdth_template = { .slave_configure = gdth_slave_configure, .bios_param = gdth_bios_param, .proc_info = gdth_proc_info, + .eh_timed_out = gdth_timed_out, .proc_name = "gdth", .can_queue = GDTH_MAXCMDS, .this_id = -1, diff --git a/drivers/scsi/gdth.h b/drivers/scsi/gdth.h index ca92476727c..1646444e9bd 100644 --- a/drivers/scsi/gdth.h +++ b/drivers/scsi/gdth.h @@ -916,7 +916,7 @@ typedef struct { gdth_cmd_str *internal_cmd_str; /* crier for internal messages*/ dma_addr_t sense_paddr; /* sense dma-addr */ unchar priority; - int timeout; + int timeout_count; /* # of timeout calls */ volatile int wait_for_completion; ushort status; ulong32 info; diff --git a/drivers/scsi/gdth_proc.c b/drivers/scsi/gdth_proc.c index ce0228e26ae..59349a316e1 100644 --- a/drivers/scsi/gdth_proc.c +++ b/drivers/scsi/gdth_proc.c @@ -748,69 +748,3 @@ static void gdth_wait_completion(gdth_ha_str *ha, int busnum, int id) } spin_unlock_irqrestore(&ha->smp_lock, flags); } - -static void gdth_stop_timeout(gdth_ha_str *ha, int busnum, int id) -{ - ulong flags; - Scsi_Cmnd *scp; - unchar b, t; - - spin_lock_irqsave(&ha->smp_lock, flags); - - for (scp = ha->req_first; scp; scp = (Scsi_Cmnd *)scp->SCp.ptr) { - struct gdth_cmndinfo *cmndinfo = gdth_cmnd_priv(scp); - if (!cmndinfo->internal_command) { - b = scp->device->channel; - t = scp->device->id; - if (t == (unchar)id && b == (unchar)busnum) { - TRACE2(("gdth_stop_timeout(): update_timeout()\n")); - cmndinfo->timeout = gdth_update_timeout(scp, 0); - } - } - } - spin_unlock_irqrestore(&ha->smp_lock, flags); -} - -static void gdth_start_timeout(gdth_ha_str *ha, int busnum, int id) -{ - ulong flags; - Scsi_Cmnd *scp; - unchar b, t; - - spin_lock_irqsave(&ha->smp_lock, flags); - - for (scp = ha->req_first; scp; scp = (Scsi_Cmnd *)scp->SCp.ptr) { - struct gdth_cmndinfo *cmndinfo = gdth_cmnd_priv(scp); - if (!cmndinfo->internal_command) { - b = scp->device->channel; - t = scp->device->id; - if (t == (unchar)id && b == (unchar)busnum) { - TRACE2(("gdth_start_timeout(): update_timeout()\n")); - gdth_update_timeout(scp, cmndinfo->timeout); - } - } - } - spin_unlock_irqrestore(&ha->smp_lock, flags); -} - -static int gdth_update_timeout(Scsi_Cmnd *scp, int timeout) -{ - int oldto; - - oldto = scp->timeout_per_command; - scp->timeout_per_command = timeout; - - if (timeout == 0) { - del_timer(&scp->eh_timeout); - scp->eh_timeout.data = (unsigned long) NULL; - scp->eh_timeout.expires = 0; - } else { - if (scp->eh_timeout.data != (unsigned long) NULL) - del_timer(&scp->eh_timeout); - scp->eh_timeout.data = (unsigned long) scp; - scp->eh_timeout.expires = jiffies + timeout; - add_timer(&scp->eh_timeout); - } - - return oldto; -} diff --git a/drivers/scsi/gdth_proc.h b/drivers/scsi/gdth_proc.h index 45e6fdacf36..9b900cc9ebe 100644 --- a/drivers/scsi/gdth_proc.h +++ b/drivers/scsi/gdth_proc.h @@ -20,9 +20,6 @@ static char *gdth_ioctl_alloc(gdth_ha_str *ha, int size, int scratch, ulong64 *paddr); static void gdth_ioctl_free(gdth_ha_str *ha, int size, char *buf, ulong64 paddr); static void gdth_wait_completion(gdth_ha_str *ha, int busnum, int id); -static void gdth_stop_timeout(gdth_ha_str *ha, int busnum, int id); -static void gdth_start_timeout(gdth_ha_str *ha, int busnum, int id); -static int gdth_update_timeout(Scsi_Cmnd *scp, int timeout); #endif diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c index fed0b02ebc1..3fdbb13e80a 100644 --- a/drivers/scsi/hosts.c +++ b/drivers/scsi/hosts.c @@ -464,7 +464,7 @@ static int __scsi_host_match(struct device *dev, void *data) struct Scsi_Host *scsi_host_lookup(unsigned short hostnum) { struct device *cdev; - struct Scsi_Host *shost = ERR_PTR(-ENXIO); + struct Scsi_Host *shost = NULL; cdev = class_find_device(&shost_class, NULL, &hostnum, __scsi_host_match); diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c index 4e0b7c8eb32..7650707a40d 100644 --- a/drivers/scsi/ibmvscsi/ibmvfc.c +++ b/drivers/scsi/ibmvscsi/ibmvfc.c @@ -2031,8 +2031,6 @@ static void ibmvfc_terminate_rport_io(struct fc_rport *rport) spin_unlock_irqrestore(shost->host_lock, flags); } else ibmvfc_issue_fc_host_lip(shost); - - scsi_target_unblock(&rport->dev); LEAVE; } diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c index 7b1502c0ab6..87e09f35d3d 100644 --- a/drivers/scsi/ibmvscsi/ibmvscsi.c +++ b/drivers/scsi/ibmvscsi/ibmvscsi.c @@ -756,7 +756,7 @@ static int ibmvscsi_queuecommand(struct scsi_cmnd *cmnd, init_event_struct(evt_struct, handle_cmd_rsp, VIOSRP_SRP_FORMAT, - cmnd->timeout_per_command/HZ); + cmnd->request->timeout/HZ); evt_struct->cmnd = cmnd; evt_struct->cmnd_done = done; diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index 461331d3dc4..740bad43599 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -40,7 +40,6 @@ #include <linux/ioport.h> #include <linux/blkdev.h> #include <linux/errno.h> -#include <linux/hdreg.h> #include <linux/slab.h> #include <linux/ide.h> #include <linux/scatterlist.h> @@ -83,7 +82,6 @@ typedef struct ide_scsi_obj { struct gendisk *disk; struct Scsi_Host *host; - struct ide_atapi_pc *pc; /* Current packet command */ unsigned long transform; /* SCSI cmd translation layer */ unsigned long log; /* log flags */ } idescsi_scsi_t; @@ -131,50 +129,6 @@ static inline idescsi_scsi_t *drive_to_idescsi(ide_drive_t *ide_drive) return scsihost_to_idescsi(ide_drive->driver_data); } -/* - * PIO data transfer routine using the scatter gather table. - */ -static void ide_scsi_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, - unsigned int bcount, int write) -{ - ide_hwif_t *hwif = drive->hwif; - const struct ide_tp_ops *tp_ops = hwif->tp_ops; - xfer_func_t *xf = write ? tp_ops->output_data : tp_ops->input_data; - char *buf; - int count; - - while (bcount) { - count = min(pc->sg->length - pc->b_count, bcount); - if (PageHighMem(sg_page(pc->sg))) { - unsigned long flags; - - local_irq_save(flags); - buf = kmap_atomic(sg_page(pc->sg), KM_IRQ0) + - pc->sg->offset; - xf(drive, NULL, buf + pc->b_count, count); - kunmap_atomic(buf - pc->sg->offset, KM_IRQ0); - local_irq_restore(flags); - } else { - buf = sg_virt(pc->sg); - xf(drive, NULL, buf + pc->b_count, count); - } - bcount -= count; pc->b_count += count; - if (pc->b_count == pc->sg->length) { - if (!--pc->sg_cnt) - break; - pc->sg = sg_next(pc->sg); - pc->b_count = 0; - } - } - - if (bcount) { - printk(KERN_ERR "%s: scatter gather table too small, %s\n", - drive->name, write ? "padding with zeros" - : "discarding data"); - ide_pad_transfer(drive, write, bcount); - } -} - static void ide_scsi_hex_dump(u8 *data, int len) { print_hex_dump(KERN_CONT, "", DUMP_PREFIX_NONE, 16, 1, data, len, 0); @@ -182,10 +136,10 @@ static void ide_scsi_hex_dump(u8 *data, int len) static int idescsi_end_request(ide_drive_t *, int, int); -static void ide_scsi_callback(ide_drive_t *drive) +static void ide_scsi_callback(ide_drive_t *drive, int dsc) { idescsi_scsi_t *scsi = drive_to_idescsi(drive); - struct ide_atapi_pc *pc = scsi->pc; + struct ide_atapi_pc *pc = drive->pc; if (pc->flags & PC_FLAG_TIMEDOUT) debug_log("%s: got timed out packet %lu at %lu\n", __func__, @@ -244,9 +198,9 @@ idescsi_atapi_error(ide_drive_t *drive, struct request *rq, u8 stat, u8 err) { ide_hwif_t *hwif = drive->hwif; - if (hwif->tp_ops->read_status(hwif) & (BUSY_STAT | DRQ_STAT)) + if (hwif->tp_ops->read_status(hwif) & (ATA_BUSY | ATA_DRQ)) /* force an abort */ - hwif->tp_ops->exec_command(hwif, WIN_IDLEIMMEDIATE); + hwif->tp_ops->exec_command(hwif, ATA_CMD_IDLEIMMEDIATE); rq->errors++; @@ -312,49 +266,10 @@ static int idescsi_end_request (ide_drive_t *drive, int uptodate, int nrsecs) spin_unlock_irqrestore(host->host_lock, flags); kfree(pc); blk_put_request(rq); - scsi->pc = NULL; + drive->pc = NULL; return 0; } -static inline unsigned long get_timeout(struct ide_atapi_pc *pc) -{ - return max_t(unsigned long, WAIT_CMD, pc->timeout - jiffies); -} - -static int idescsi_expiry(ide_drive_t *drive) -{ - idescsi_scsi_t *scsi = drive_to_idescsi(drive); - struct ide_atapi_pc *pc = scsi->pc; - - debug_log("%s called for %lu at %lu\n", __func__, - pc->scsi_cmd->serial_number, jiffies); - - pc->flags |= PC_FLAG_TIMEDOUT; - - return 0; /* we do not want the ide subsystem to retry */ -} - -/* - * Our interrupt handler. - */ -static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) -{ - idescsi_scsi_t *scsi = drive_to_idescsi(drive); - struct ide_atapi_pc *pc = scsi->pc; - - return ide_pc_intr(drive, pc, idescsi_pc_intr, get_timeout(pc), - idescsi_expiry, NULL, NULL, NULL, - ide_scsi_io_buffers); -} - -static ide_startstop_t idescsi_transfer_pc(ide_drive_t *drive) -{ - idescsi_scsi_t *scsi = drive_to_idescsi(drive); - - return ide_transfer_pc(drive, scsi->pc, idescsi_pc_intr, - get_timeout(scsi->pc), idescsi_expiry); -} - static inline int idescsi_set_direction(struct ide_atapi_pc *pc) { switch (pc->c[0]) { @@ -397,13 +312,10 @@ static int idescsi_map_sg(ide_drive_t *drive, struct ide_atapi_pc *pc) static ide_startstop_t idescsi_issue_pc(ide_drive_t *drive, struct ide_atapi_pc *pc) { - idescsi_scsi_t *scsi = drive_to_idescsi(drive); - /* Set the current packet command */ - scsi->pc = pc; + drive->pc = pc; - return ide_issue_pc(drive, pc, idescsi_transfer_pc, - get_timeout(pc), idescsi_expiry); + return ide_issue_pc(drive, ide_scsi_get_timeout(pc), ide_scsi_expiry); } /* @@ -419,7 +331,8 @@ static ide_startstop_t idescsi_do_request (ide_drive_t *drive, struct request *r if (blk_sense_request(rq) || blk_special_request(rq)) { struct ide_atapi_pc *pc = (struct ide_atapi_pc *)rq->special; - if (drive->using_dma && !idescsi_map_sg(drive, pc)) + if ((drive->dev_flags & IDE_DFLAG_USING_DMA) && + idescsi_map_sg(drive, pc) == 0) pc->flags |= PC_FLAG_DMA_OK; return idescsi_issue_pc(drive, pc); @@ -430,21 +343,41 @@ static ide_startstop_t idescsi_do_request (ide_drive_t *drive, struct request *r } #ifdef CONFIG_IDE_PROC_FS -static void idescsi_add_settings(ide_drive_t *drive) -{ - idescsi_scsi_t *scsi = drive_to_idescsi(drive); - -/* - * drive setting name read/write data type min max mul_factor div_factor data pointer set function - */ - ide_add_setting(drive, "bios_cyl", SETTING_RW, TYPE_INT, 0, 1023, 1, 1, &drive->bios_cyl, NULL); - ide_add_setting(drive, "bios_head", SETTING_RW, TYPE_BYTE, 0, 255, 1, 1, &drive->bios_head, NULL); - ide_add_setting(drive, "bios_sect", SETTING_RW, TYPE_BYTE, 0, 63, 1, 1, &drive->bios_sect, NULL); - ide_add_setting(drive, "transform", SETTING_RW, TYPE_INT, 0, 3, 1, 1, &scsi->transform, NULL); - ide_add_setting(drive, "log", SETTING_RW, TYPE_INT, 0, 1, 1, 1, &scsi->log, NULL); -} -#else -static inline void idescsi_add_settings(ide_drive_t *drive) { ; } +#define ide_scsi_devset_get(name, field) \ +static int get_##name(ide_drive_t *drive) \ +{ \ + idescsi_scsi_t *scsi = drive_to_idescsi(drive); \ + return scsi->field; \ +} + +#define ide_scsi_devset_set(name, field) \ +static int set_##name(ide_drive_t *drive, int arg) \ +{ \ + idescsi_scsi_t *scsi = drive_to_idescsi(drive); \ + scsi->field = arg; \ + return 0; \ +} + +#define ide_scsi_devset_rw_field(_name, _field) \ +ide_scsi_devset_get(_name, _field); \ +ide_scsi_devset_set(_name, _field); \ +IDE_DEVSET(_name, DS_SYNC, get_##_name, set_##_name); + +ide_devset_rw_field(bios_cyl, bios_cyl); +ide_devset_rw_field(bios_head, bios_head); +ide_devset_rw_field(bios_sect, bios_sect); + +ide_scsi_devset_rw_field(transform, transform); +ide_scsi_devset_rw_field(log, log); + +static const struct ide_proc_devset idescsi_settings[] = { + IDE_PROC_DEVSET(bios_cyl, 0, 1023), + IDE_PROC_DEVSET(bios_head, 0, 255), + IDE_PROC_DEVSET(bios_sect, 0, 63), + IDE_PROC_DEVSET(log, 0, 1), + IDE_PROC_DEVSET(transform, 0, 3), + { 0 }, +}; #endif /* @@ -452,16 +385,16 @@ static inline void idescsi_add_settings(ide_drive_t *drive) { ; } */ static void idescsi_setup (ide_drive_t *drive, idescsi_scsi_t *scsi) { - if (drive->id && (drive->id->config & 0x0060) == 0x20) - set_bit(IDE_AFLAG_DRQ_INTERRUPT, &drive->atapi_flags); clear_bit(IDESCSI_SG_TRANSFORM, &scsi->transform); #if IDESCSI_DEBUG_LOG set_bit(IDESCSI_LOG_CMD, &scsi->log); #endif /* IDESCSI_DEBUG_LOG */ - drive->pc_callback = ide_scsi_callback; + drive->pc_callback = ide_scsi_callback; + drive->pc_update_buffers = NULL; + drive->pc_io_buffers = ide_io_buffers; - idescsi_add_settings(drive); + ide_proc_register_driver(drive, scsi->driver); } static void ide_scsi_remove(ide_drive_t *drive) @@ -481,7 +414,7 @@ static void ide_scsi_remove(ide_drive_t *drive) ide_scsi_put(scsi); - drive->scsi = 0; + drive->dev_flags &= ~IDE_DFLAG_SCSI; } static int ide_scsi_probe(ide_drive_t *); @@ -502,13 +435,12 @@ static ide_driver_t idescsi_driver = { .probe = ide_scsi_probe, .remove = ide_scsi_remove, .version = IDESCSI_VERSION, - .media = ide_scsi, - .supports_dsc_overlap = 0, .do_request = idescsi_do_request, .end_request = idescsi_end_request, .error = idescsi_atapi_error, #ifdef CONFIG_IDE_PROC_FS .proc = idescsi_proc, + .settings = idescsi_settings, #endif }; @@ -612,7 +544,7 @@ static int idescsi_queue (struct scsi_cmnd *cmd, pc->req_xfer = pc->buf_size = scsi_bufflen(cmd); pc->scsi_cmd = cmd; pc->done = done; - pc->timeout = jiffies + cmd->timeout_per_command; + pc->timeout = jiffies + cmd->request->timeout; if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) { printk ("ide-scsi: %s: que %lu, cmd = ", drive->name, cmd->serial_number); @@ -647,6 +579,8 @@ static int idescsi_eh_abort (struct scsi_cmnd *cmd) int busy; int ret = FAILED; + struct ide_atapi_pc *pc; + /* In idescsi_eh_abort we try to gently pry our command from the ide subsystem */ if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) @@ -667,26 +601,27 @@ static int idescsi_eh_abort (struct scsi_cmnd *cmd) spin_lock_irq(&ide_lock); /* If there is no pc running we're done (our interrupt took care of it) */ - if (!scsi->pc) { + pc = drive->pc; + if (pc == NULL) { ret = SUCCESS; goto ide_unlock; } /* It's somewhere in flight. Does ide subsystem agree? */ - if (scsi->pc->scsi_cmd->serial_number == cmd->serial_number && !busy && - elv_queue_empty(drive->queue) && HWGROUP(drive)->rq != scsi->pc->rq) { + if (pc->scsi_cmd->serial_number == cmd->serial_number && !busy && + elv_queue_empty(drive->queue) && HWGROUP(drive)->rq != pc->rq) { /* * FIXME - not sure this condition can ever occur */ printk (KERN_ERR "ide-scsi: cmd aborted!\n"); - if (blk_sense_request(scsi->pc->rq)) - kfree(scsi->pc->buf); + if (blk_sense_request(pc->rq)) + kfree(pc->buf); /* we need to call blk_put_request twice. */ - blk_put_request(scsi->pc->rq); - blk_put_request(scsi->pc->rq); - kfree(scsi->pc); - scsi->pc = NULL; + blk_put_request(pc->rq); + blk_put_request(pc->rq); + kfree(pc); + drive->pc = NULL; ret = SUCCESS; } @@ -708,6 +643,8 @@ static int idescsi_eh_reset (struct scsi_cmnd *cmd) int ready = 0; int ret = SUCCESS; + struct ide_atapi_pc *pc; + /* In idescsi_eh_reset we forcefully remove the command from the ide subsystem and reset the device. */ if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) @@ -722,7 +659,9 @@ static int idescsi_eh_reset (struct scsi_cmnd *cmd) spin_lock_irq(cmd->device->host->host_lock); spin_lock(&ide_lock); - if (!scsi->pc || (req = scsi->pc->rq) != HWGROUP(drive)->rq || !HWGROUP(drive)->handler) { + pc = drive->pc; + + if (pc == NULL || (req = pc->rq) != HWGROUP(drive)->rq || !HWGROUP(drive)->handler) { printk (KERN_WARNING "ide-scsi: No active request in idescsi_eh_reset\n"); spin_unlock(&ide_lock); spin_unlock_irq(cmd->device->host->host_lock); @@ -733,9 +672,9 @@ static int idescsi_eh_reset (struct scsi_cmnd *cmd) if (__blk_end_request(req, -EIO, 0)) BUG(); if (blk_sense_request(req)) - kfree(scsi->pc->buf); - kfree(scsi->pc); - scsi->pc = NULL; + kfree(pc->buf); + kfree(pc); + drive->pc = NULL; blk_put_request(req); /* now nuke the drive queue */ @@ -811,6 +750,7 @@ static int ide_scsi_probe(ide_drive_t *drive) struct gendisk *g; static int warned; int err = -ENOMEM; + u16 last_lun; if (!warned && drive->media == ide_cdrom) { printk(KERN_WARNING "ide-scsi is deprecated for cd burning! Use ide-cd and give dev=/dev/hdX as device\n"); @@ -821,12 +761,11 @@ static int ide_scsi_probe(ide_drive_t *drive) return -ENODEV; if (!strstr("ide-scsi", drive->driver_req) || - !drive->present || drive->media == ide_disk || !(host = scsi_host_alloc(&idescsi_template,sizeof(idescsi_scsi_t)))) return -ENODEV; - drive->scsi = 1; + drive->dev_flags |= IDE_DFLAG_SCSI; g = alloc_disk(1 << PARTN_BITS); if (!g) @@ -836,12 +775,12 @@ static int ide_scsi_probe(ide_drive_t *drive) host->max_id = 1; - if (drive->id->last_lun) - debug_log("%s: id->last_lun=%u\n", drive->name, - drive->id->last_lun); + last_lun = drive->id[ATA_ID_LAST_LUN]; + if (last_lun) + debug_log("%s: last_lun=%u\n", drive->name, last_lun); - if ((drive->id->last_lun & 0x7) != 7) - host->max_lun = (drive->id->last_lun & 0x7) + 1; + if ((last_lun & 7) != 7) + host->max_lun = (last_lun & 7) + 1; else host->max_lun = 1; @@ -852,7 +791,6 @@ static int ide_scsi_probe(ide_drive_t *drive) idescsi->host = host; idescsi->disk = g; g->private_data = &idescsi->driver; - ide_proc_register_driver(drive, &idescsi_driver); err = 0; idescsi_setup(drive, idescsi); g->fops = &idescsi_ops; @@ -868,7 +806,7 @@ static int ide_scsi_probe(ide_drive_t *drive) put_disk(g); out_host_put: - drive->scsi = 0; + drive->dev_flags &= ~IDE_DFLAG_SCSI; scsi_host_put(host); return err; } diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index e7a3a655442..d30eb7ba018 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -3670,7 +3670,8 @@ static int ipr_slave_configure(struct scsi_device *sdev) sdev->no_uld_attach = 1; } if (ipr_is_vset_device(res)) { - sdev->timeout = IPR_VSET_RW_TIMEOUT; + blk_queue_rq_timeout(sdev->request_queue, + IPR_VSET_RW_TIMEOUT); blk_queue_max_sectors(sdev->request_queue, IPR_VSET_MAX_SECTORS); } if (ipr_is_vset_device(res) || ipr_is_scsi_disk(res)) diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c index bc9e6ddf41d..ef683f0d2b5 100644 --- a/drivers/scsi/ips.c +++ b/drivers/scsi/ips.c @@ -3818,7 +3818,7 @@ ips_send_cmd(ips_ha_t * ha, ips_scb_t * scb) scb->cmd.dcdb.segment_4G = 0; scb->cmd.dcdb.enhanced_sg = 0; - TimeOut = scb->scsi_cmd->timeout_per_command; + TimeOut = scb->scsi_cmd->request->timeout; if (ha->subsys->param[4] & 0x00100000) { /* If NEW Tape DCDB is Supported */ if (!scb->sg_len) { diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index 2a2f0094570..ed6c54cae7b 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -523,22 +523,20 @@ iscsi_tcp_cleanup_task(struct iscsi_conn *conn, struct iscsi_task *task) } /** - * iscsi_data_rsp - SCSI Data-In Response processing + * iscsi_data_in - SCSI Data-In Response processing * @conn: iscsi connection * @task: scsi command task **/ static int -iscsi_data_rsp(struct iscsi_conn *conn, struct iscsi_task *task) +iscsi_data_in(struct iscsi_conn *conn, struct iscsi_task *task) { struct iscsi_tcp_conn *tcp_conn = conn->dd_data; struct iscsi_tcp_task *tcp_task = task->dd_data; struct iscsi_data_rsp *rhdr = (struct iscsi_data_rsp *)tcp_conn->in.hdr; - struct iscsi_session *session = conn->session; - struct scsi_cmnd *sc = task->sc; int datasn = be32_to_cpu(rhdr->datasn); - unsigned total_in_length = scsi_in(sc)->length; + unsigned total_in_length = scsi_in(task->sc)->length; - iscsi_update_cmdsn(session, (struct iscsi_nopin*)rhdr); + iscsi_update_cmdsn(conn->session, (struct iscsi_nopin*)rhdr); if (tcp_conn->in.datalen == 0) return 0; @@ -558,23 +556,6 @@ iscsi_data_rsp(struct iscsi_conn *conn, struct iscsi_task *task) return ISCSI_ERR_DATA_OFFSET; } - if (rhdr->flags & ISCSI_FLAG_DATA_STATUS) { - sc->result = (DID_OK << 16) | rhdr->cmd_status; - conn->exp_statsn = be32_to_cpu(rhdr->statsn) + 1; - if (rhdr->flags & (ISCSI_FLAG_DATA_UNDERFLOW | - ISCSI_FLAG_DATA_OVERFLOW)) { - int res_count = be32_to_cpu(rhdr->residual_count); - - if (res_count > 0 && - (rhdr->flags & ISCSI_FLAG_CMD_OVERFLOW || - res_count <= total_in_length)) - scsi_in(sc)->resid = res_count; - else - sc->result = (DID_BAD_TARGET << 16) | - rhdr->cmd_status; - } - } - conn->datain_pdus_cnt++; return 0; } @@ -774,7 +755,7 @@ iscsi_tcp_hdr_dissect(struct iscsi_conn *conn, struct iscsi_hdr *hdr) if (!task) rc = ISCSI_ERR_BAD_ITT; else - rc = iscsi_data_rsp(conn, task); + rc = iscsi_data_in(conn, task); if (rc) { spin_unlock(&conn->session->lock); break; @@ -998,7 +979,7 @@ iscsi_tcp_recv(read_descriptor_t *rd_desc, struct sk_buff *skb, error: debug_tcp("Error receiving PDU, errno=%d\n", rc); - iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED); + iscsi_conn_failure(conn, rc); return 0; } @@ -1117,8 +1098,10 @@ iscsi_xmit(struct iscsi_conn *conn) while (1) { rc = iscsi_tcp_xmit_segment(tcp_conn, segment); - if (rc < 0) + if (rc < 0) { + rc = ISCSI_ERR_XMIT_FAILED; goto error; + } if (rc == 0) break; @@ -1127,7 +1110,7 @@ iscsi_xmit(struct iscsi_conn *conn) if (segment->total_copied >= segment->total_size) { if (segment->done != NULL) { rc = segment->done(tcp_conn, segment); - if (rc < 0) + if (rc != 0) goto error; } } @@ -1142,8 +1125,8 @@ error: /* Transmit error. We could initiate error recovery * here. */ debug_tcp("Error sending PDU, errno=%d\n", rc); - iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED); - return rc; + iscsi_conn_failure(conn, rc); + return -EIO; } /** @@ -1904,6 +1887,7 @@ static void iscsi_tcp_session_destroy(struct iscsi_cls_session *cls_session) struct Scsi_Host *shost = iscsi_session_to_shost(cls_session); iscsi_r2tpool_free(cls_session->dd_data); + iscsi_session_teardown(cls_session); iscsi_host_remove(shost); iscsi_host_free(shost); @@ -1927,7 +1911,7 @@ static struct scsi_host_template iscsi_sht = { .cmd_per_lun = ISCSI_DEF_CMD_PER_LUN, .eh_abort_handler = iscsi_eh_abort, .eh_device_reset_handler= iscsi_eh_device_reset, - .eh_host_reset_handler = iscsi_eh_host_reset, + .eh_target_reset_handler= iscsi_eh_target_reset, .use_clustering = DISABLE_CLUSTERING, .slave_configure = iscsi_tcp_slave_configure, .proc_name = "iscsi_tcp", diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 299e075a7b3..801c7cf54d2 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -404,11 +404,6 @@ static void fail_command(struct iscsi_conn *conn, struct iscsi_task *task, conn->session->queued_cmdsn--; else conn->session->tt->cleanup_task(conn, task); - /* - * Check if cleanup_task dropped the lock and the command completed, - */ - if (!task->sc) - return; sc->result = err; if (!scsi_bidi_cmnd(sc)) @@ -633,6 +628,40 @@ out: __iscsi_put_task(task); } +/** + * iscsi_data_in_rsp - SCSI Data-In Response processing + * @conn: iscsi connection + * @hdr: iscsi pdu + * @task: scsi command task + **/ +static void +iscsi_data_in_rsp(struct iscsi_conn *conn, struct iscsi_hdr *hdr, + struct iscsi_task *task) +{ + struct iscsi_data_rsp *rhdr = (struct iscsi_data_rsp *)hdr; + struct scsi_cmnd *sc = task->sc; + + if (!(rhdr->flags & ISCSI_FLAG_DATA_STATUS)) + return; + + sc->result = (DID_OK << 16) | rhdr->cmd_status; + conn->exp_statsn = be32_to_cpu(rhdr->statsn) + 1; + if (rhdr->flags & (ISCSI_FLAG_DATA_UNDERFLOW | + ISCSI_FLAG_DATA_OVERFLOW)) { + int res_count = be32_to_cpu(rhdr->residual_count); + + if (res_count > 0 && + (rhdr->flags & ISCSI_FLAG_CMD_OVERFLOW || + res_count <= scsi_in(sc)->length)) + scsi_in(sc)->resid = res_count; + else + sc->result = (DID_BAD_TARGET << 16) | rhdr->cmd_status; + } + + conn->scsirsp_pdus_cnt++; + __iscsi_put_task(task); +} + static void iscsi_tmf_rsp(struct iscsi_conn *conn, struct iscsi_hdr *hdr) { struct iscsi_tm_rsp *tmf = (struct iscsi_tm_rsp *)hdr; @@ -818,12 +847,7 @@ int __iscsi_complete_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr, iscsi_scsi_cmd_rsp(conn, hdr, task, data, datalen); break; case ISCSI_OP_SCSI_DATA_IN: - if (hdr->flags & ISCSI_FLAG_DATA_STATUS) { - conn->scsirsp_pdus_cnt++; - iscsi_update_cmdsn(session, - (struct iscsi_nopin*) hdr); - __iscsi_put_task(task); - } + iscsi_data_in_rsp(conn, hdr, task); break; case ISCSI_OP_LOGOUT_RSP: iscsi_update_cmdsn(session, (struct iscsi_nopin*)hdr); @@ -954,6 +978,38 @@ struct iscsi_task *iscsi_itt_to_ctask(struct iscsi_conn *conn, itt_t itt) } EXPORT_SYMBOL_GPL(iscsi_itt_to_ctask); +void iscsi_session_failure(struct iscsi_cls_session *cls_session, + enum iscsi_err err) +{ + struct iscsi_session *session = cls_session->dd_data; + struct iscsi_conn *conn; + struct device *dev; + unsigned long flags; + + spin_lock_irqsave(&session->lock, flags); + conn = session->leadconn; + if (session->state == ISCSI_STATE_TERMINATE || !conn) { + spin_unlock_irqrestore(&session->lock, flags); + return; + } + + dev = get_device(&conn->cls_conn->dev); + spin_unlock_irqrestore(&session->lock, flags); + if (!dev) + return; + /* + * if the host is being removed bypass the connection + * recovery initialization because we are going to kill + * the session. + */ + if (err == ISCSI_ERR_INVALID_HOST) + iscsi_conn_error_event(conn->cls_conn, err); + else + iscsi_conn_failure(conn, err); + put_device(dev); +} +EXPORT_SYMBOL_GPL(iscsi_session_failure); + void iscsi_conn_failure(struct iscsi_conn *conn, enum iscsi_err err) { struct iscsi_session *session = conn->session; @@ -968,9 +1024,10 @@ void iscsi_conn_failure(struct iscsi_conn *conn, enum iscsi_err err) if (conn->stop_stage == 0) session->state = ISCSI_STATE_FAILED; spin_unlock_irqrestore(&session->lock, flags); + set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx); set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_rx); - iscsi_conn_error(conn->cls_conn, err); + iscsi_conn_error_event(conn->cls_conn, err); } EXPORT_SYMBOL_GPL(iscsi_conn_failure); @@ -1194,15 +1251,13 @@ int iscsi_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *)) switch (session->state) { case ISCSI_STATE_IN_RECOVERY: reason = FAILURE_SESSION_IN_RECOVERY; - sc->result = DID_IMM_RETRY << 16; - break; + goto reject; case ISCSI_STATE_LOGGING_OUT: reason = FAILURE_SESSION_LOGGING_OUT; - sc->result = DID_IMM_RETRY << 16; - break; + goto reject; case ISCSI_STATE_RECOVERY_FAILED: reason = FAILURE_SESSION_RECOVERY_TIMEOUT; - sc->result = DID_NO_CONNECT << 16; + sc->result = DID_TRANSPORT_FAILFAST << 16; break; case ISCSI_STATE_TERMINATE: reason = FAILURE_SESSION_TERMINATE; @@ -1267,7 +1322,7 @@ reject: spin_unlock(&session->lock); debug_scsi("cmd 0x%x rejected (%d)\n", sc->cmnd[0], reason); spin_lock(host->host_lock); - return SCSI_MLQUEUE_HOST_BUSY; + return SCSI_MLQUEUE_TARGET_BUSY; fault: spin_unlock(&session->lock); @@ -1307,7 +1362,7 @@ void iscsi_session_recovery_timedout(struct iscsi_cls_session *cls_session) } EXPORT_SYMBOL_GPL(iscsi_session_recovery_timedout); -int iscsi_eh_host_reset(struct scsi_cmnd *sc) +int iscsi_eh_target_reset(struct scsi_cmnd *sc) { struct iscsi_cls_session *cls_session; struct iscsi_session *session; @@ -1321,7 +1376,7 @@ int iscsi_eh_host_reset(struct scsi_cmnd *sc) spin_lock_bh(&session->lock); if (session->state == ISCSI_STATE_TERMINATE) { failed: - debug_scsi("failing host reset: session terminated " + debug_scsi("failing target reset: session terminated " "[CID %d age %d]\n", conn->id, session->age); spin_unlock_bh(&session->lock); mutex_unlock(&session->eh_mutex); @@ -1336,7 +1391,7 @@ failed: */ iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED); - debug_scsi("iscsi_eh_host_reset wait for relogin\n"); + debug_scsi("iscsi_eh_target_reset wait for relogin\n"); wait_event_interruptible(conn->ehwait, session->state == ISCSI_STATE_TERMINATE || session->state == ISCSI_STATE_LOGGED_IN || @@ -1348,14 +1403,14 @@ failed: spin_lock_bh(&session->lock); if (session->state == ISCSI_STATE_LOGGED_IN) iscsi_session_printk(KERN_INFO, session, - "host reset succeeded\n"); + "target reset succeeded\n"); else goto failed; spin_unlock_bh(&session->lock); mutex_unlock(&session->eh_mutex); return SUCCESS; } -EXPORT_SYMBOL_GPL(iscsi_eh_host_reset); +EXPORT_SYMBOL_GPL(iscsi_eh_target_reset); static void iscsi_tmf_timedout(unsigned long data) { @@ -1456,7 +1511,7 @@ static void fail_all_commands(struct iscsi_conn *conn, unsigned lun, if (lun == task->sc->device->lun || lun == -1) { debug_scsi("failing in progress sc %p itt 0x%x\n", task->sc, task->itt); - fail_command(conn, task, DID_BUS_BUSY << 16); + fail_command(conn, task, error << 16); } } } @@ -1476,12 +1531,12 @@ static void iscsi_start_tx(struct iscsi_conn *conn) scsi_queue_work(conn->session->host, &conn->xmitwork); } -static enum scsi_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd *scmd) +static enum blk_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd *scmd) { struct iscsi_cls_session *cls_session; struct iscsi_session *session; struct iscsi_conn *conn; - enum scsi_eh_timer_return rc = EH_NOT_HANDLED; + enum blk_eh_timer_return rc = BLK_EH_NOT_HANDLED; cls_session = starget_to_session(scsi_target(scmd->device)); session = cls_session->dd_data; @@ -1494,14 +1549,14 @@ static enum scsi_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd *scmd) * We are probably in the middle of iscsi recovery so let * that complete and handle the error. */ - rc = EH_RESET_TIMER; + rc = BLK_EH_RESET_TIMER; goto done; } conn = session->leadconn; if (!conn) { /* In the middle of shuting down */ - rc = EH_RESET_TIMER; + rc = BLK_EH_RESET_TIMER; goto done; } @@ -1513,20 +1568,21 @@ static enum scsi_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd *scmd) */ if (time_before_eq(conn->last_recv + (conn->recv_timeout * HZ) + (conn->ping_timeout * HZ), jiffies)) - rc = EH_RESET_TIMER; + rc = BLK_EH_RESET_TIMER; /* * if we are about to check the transport then give the command * more time */ if (time_before_eq(conn->last_recv + (conn->recv_timeout * HZ), jiffies)) - rc = EH_RESET_TIMER; + rc = BLK_EH_RESET_TIMER; /* if in the middle of checking the transport then give us more time */ if (conn->ping_task) - rc = EH_RESET_TIMER; + rc = BLK_EH_RESET_TIMER; done: spin_unlock(&session->lock); - debug_scsi("return %s\n", rc == EH_RESET_TIMER ? "timer reset" : "nh"); + debug_scsi("return %s\n", rc == BLK_EH_RESET_TIMER ? + "timer reset" : "nh"); return rc; } @@ -1768,10 +1824,10 @@ int iscsi_eh_device_reset(struct scsi_cmnd *sc) iscsi_suspend_tx(conn); - spin_lock(&session->lock); + spin_lock_bh(&session->lock); fail_all_commands(conn, sc->device->lun, DID_ERROR); conn->tmf_state = TMF_INITIAL; - spin_unlock(&session->lock); + spin_unlock_bh(&session->lock); iscsi_start_tx(conn); goto done; @@ -1877,6 +1933,7 @@ struct Scsi_Host *iscsi_host_alloc(struct scsi_host_template *sht, int dd_data_size, uint16_t qdepth) { struct Scsi_Host *shost; + struct iscsi_host *ihost; shost = scsi_host_alloc(sht, sizeof(struct iscsi_host) + dd_data_size); if (!shost) @@ -1891,22 +1948,43 @@ struct Scsi_Host *iscsi_host_alloc(struct scsi_host_template *sht, qdepth = ISCSI_DEF_CMD_PER_LUN; } shost->cmd_per_lun = qdepth; + + ihost = shost_priv(shost); + spin_lock_init(&ihost->lock); + ihost->state = ISCSI_HOST_SETUP; + ihost->num_sessions = 0; + init_waitqueue_head(&ihost->session_removal_wq); return shost; } EXPORT_SYMBOL_GPL(iscsi_host_alloc); +static void iscsi_notify_host_removed(struct iscsi_cls_session *cls_session) +{ + iscsi_session_failure(cls_session, ISCSI_ERR_INVALID_HOST); +} + /** * iscsi_host_remove - remove host and sessions * @shost: scsi host * - * This will also remove any sessions attached to the host, but if userspace - * is managing the session at the same time this will break. TODO: add - * refcounting to the netlink iscsi interface so a rmmod or host hot unplug - * does not remove the memory from under us. + * If there are any sessions left, this will initiate the removal and wait + * for the completion. */ void iscsi_host_remove(struct Scsi_Host *shost) { - iscsi_host_for_each_session(shost, iscsi_session_teardown); + struct iscsi_host *ihost = shost_priv(shost); + unsigned long flags; + + spin_lock_irqsave(&ihost->lock, flags); + ihost->state = ISCSI_HOST_REMOVED; + spin_unlock_irqrestore(&ihost->lock, flags); + + iscsi_host_for_each_session(shost, iscsi_notify_host_removed); + wait_event_interruptible(ihost->session_removal_wq, + ihost->num_sessions == 0); + if (signal_pending(current)) + flush_signals(current); + scsi_remove_host(shost); } EXPORT_SYMBOL_GPL(iscsi_host_remove); @@ -1922,6 +2000,27 @@ void iscsi_host_free(struct Scsi_Host *shost) } EXPORT_SYMBOL_GPL(iscsi_host_free); +static void iscsi_host_dec_session_cnt(struct Scsi_Host *shost) +{ + struct iscsi_host *ihost = shost_priv(shost); + unsigned long flags; + + shost = scsi_host_get(shost); + if (!shost) { + printk(KERN_ERR "Invalid state. Cannot notify host removal " + "of session teardown event because host already " + "removed.\n"); + return; + } + + spin_lock_irqsave(&ihost->lock, flags); + ihost->num_sessions--; + if (ihost->num_sessions == 0) + wake_up(&ihost->session_removal_wq); + spin_unlock_irqrestore(&ihost->lock, flags); + scsi_host_put(shost); +} + /** * iscsi_session_setup - create iscsi cls session and host and session * @iscsit: iscsi transport template @@ -1942,9 +2041,19 @@ iscsi_session_setup(struct iscsi_transport *iscsit, struct Scsi_Host *shost, uint16_t cmds_max, int cmd_task_size, uint32_t initial_cmdsn, unsigned int id) { + struct iscsi_host *ihost = shost_priv(shost); struct iscsi_session *session; struct iscsi_cls_session *cls_session; int cmd_i, scsi_cmds, total_cmds = cmds_max; + unsigned long flags; + + spin_lock_irqsave(&ihost->lock, flags); + if (ihost->state == ISCSI_HOST_REMOVED) { + spin_unlock_irqrestore(&ihost->lock, flags); + return NULL; + } + ihost->num_sessions++; + spin_unlock_irqrestore(&ihost->lock, flags); if (!total_cmds) total_cmds = ISCSI_DEF_XMIT_CMDS_MAX; @@ -1957,7 +2066,7 @@ iscsi_session_setup(struct iscsi_transport *iscsit, struct Scsi_Host *shost, printk(KERN_ERR "iscsi: invalid can_queue of %d. can_queue " "must be a power of two that is at least %d.\n", total_cmds, ISCSI_TOTAL_CMDS_MIN); - return NULL; + goto dec_session_count; } if (total_cmds > ISCSI_TOTAL_CMDS_MAX) { @@ -1981,7 +2090,7 @@ iscsi_session_setup(struct iscsi_transport *iscsit, struct Scsi_Host *shost, cls_session = iscsi_alloc_session(shost, iscsit, sizeof(struct iscsi_session)); if (!cls_session) - return NULL; + goto dec_session_count; session = cls_session->dd_data; session->cls_session = cls_session; session->host = shost; @@ -2020,6 +2129,7 @@ iscsi_session_setup(struct iscsi_transport *iscsit, struct Scsi_Host *shost, if (iscsi_add_session(cls_session, id)) goto cls_session_fail; + return cls_session; cls_session_fail: @@ -2028,6 +2138,8 @@ module_get_fail: iscsi_pool_free(&session->cmdpool); cmdpool_alloc_fail: iscsi_free_session(cls_session); +dec_session_count: + iscsi_host_dec_session_cnt(shost); return NULL; } EXPORT_SYMBOL_GPL(iscsi_session_setup); @@ -2043,6 +2155,7 @@ void iscsi_session_teardown(struct iscsi_cls_session *cls_session) { struct iscsi_session *session = cls_session->dd_data; struct module *owner = cls_session->transport->owner; + struct Scsi_Host *shost = session->host; iscsi_pool_free(&session->cmdpool); @@ -2055,6 +2168,7 @@ void iscsi_session_teardown(struct iscsi_cls_session *cls_session) kfree(session->ifacename); iscsi_destroy_session(cls_session); + iscsi_host_dec_session_cnt(shost); module_put(owner); } EXPORT_SYMBOL_GPL(iscsi_session_teardown); @@ -2334,8 +2448,10 @@ static void iscsi_start_session_recovery(struct iscsi_session *session, * flush queues. */ spin_lock_bh(&session->lock); - fail_all_commands(conn, -1, - STOP_CONN_RECOVER ? DID_BUS_BUSY : DID_ERROR); + if (flag == STOP_CONN_RECOVER) + fail_all_commands(conn, -1, DID_TRANSPORT_DISRUPTED); + else + fail_all_commands(conn, -1, DID_ERROR); flush_control_queues(session, conn); spin_unlock_bh(&session->lock); mutex_unlock(&session->eh_mutex); diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c index 48ee8c7f5bd..e1550117069 100644 --- a/drivers/scsi/libsas/sas_ata.c +++ b/drivers/scsi/libsas/sas_ata.c @@ -294,10 +294,10 @@ static void sas_ata_post_internal(struct ata_queued_cmd *qc) } } -static int sas_ata_scr_write(struct ata_port *ap, unsigned int sc_reg_in, +static int sas_ata_scr_write(struct ata_link *link, unsigned int sc_reg_in, u32 val) { - struct domain_device *dev = ap->private_data; + struct domain_device *dev = link->ap->private_data; SAS_DPRINTK("STUB %s\n", __func__); switch (sc_reg_in) { @@ -319,10 +319,10 @@ static int sas_ata_scr_write(struct ata_port *ap, unsigned int sc_reg_in, return 0; } -static int sas_ata_scr_read(struct ata_port *ap, unsigned int sc_reg_in, +static int sas_ata_scr_read(struct ata_link *link, unsigned int sc_reg_in, u32 *val) { - struct domain_device *dev = ap->private_data; + struct domain_device *dev = link->ap->private_data; SAS_DPRINTK("STUB %s\n", __func__); switch (sc_reg_in) { @@ -398,7 +398,7 @@ void sas_ata_task_abort(struct sas_task *task) /* Bounce SCSI-initiated commands to the SCSI EH */ if (qc->scsicmd) { - scsi_req_abort_cmd(qc->scsicmd); + blk_abort_request(qc->scsicmd->request); scsi_schedule_eh(qc->scsicmd->device->host); return; } diff --git a/drivers/scsi/libsas/sas_internal.h b/drivers/scsi/libsas/sas_internal.h index b4f9368f116..0001374bd6b 100644 --- a/drivers/scsi/libsas/sas_internal.h +++ b/drivers/scsi/libsas/sas_internal.h @@ -55,7 +55,7 @@ void sas_unregister_phys(struct sas_ha_struct *sas_ha); int sas_register_ports(struct sas_ha_struct *sas_ha); void sas_unregister_ports(struct sas_ha_struct *sas_ha); -enum scsi_eh_timer_return sas_scsi_timed_out(struct scsi_cmnd *); +enum blk_eh_timer_return sas_scsi_timed_out(struct scsi_cmnd *); int sas_init_queue(struct sas_ha_struct *sas_ha); int sas_init_events(struct sas_ha_struct *sas_ha); diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c index a8e3ef30907..744838780ad 100644 --- a/drivers/scsi/libsas/sas_scsi_host.c +++ b/drivers/scsi/libsas/sas_scsi_host.c @@ -673,43 +673,43 @@ out: return; } -enum scsi_eh_timer_return sas_scsi_timed_out(struct scsi_cmnd *cmd) +enum blk_eh_timer_return sas_scsi_timed_out(struct scsi_cmnd *cmd) { struct sas_task *task = TO_SAS_TASK(cmd); unsigned long flags; if (!task) { - cmd->timeout_per_command /= 2; + cmd->request->timeout /= 2; SAS_DPRINTK("command 0x%p, task 0x%p, gone: %s\n", - cmd, task, (cmd->timeout_per_command ? - "EH_RESET_TIMER" : "EH_NOT_HANDLED")); - if (!cmd->timeout_per_command) - return EH_NOT_HANDLED; - return EH_RESET_TIMER; + cmd, task, (cmd->request->timeout ? + "BLK_EH_RESET_TIMER" : "BLK_EH_NOT_HANDLED")); + if (!cmd->request->timeout) + return BLK_EH_NOT_HANDLED; + return BLK_EH_RESET_TIMER; } spin_lock_irqsave(&task->task_state_lock, flags); BUG_ON(task->task_state_flags & SAS_TASK_STATE_ABORTED); if (task->task_state_flags & SAS_TASK_STATE_DONE) { spin_unlock_irqrestore(&task->task_state_lock, flags); - SAS_DPRINTK("command 0x%p, task 0x%p, timed out: EH_HANDLED\n", - cmd, task); - return EH_HANDLED; + SAS_DPRINTK("command 0x%p, task 0x%p, timed out: " + "BLK_EH_HANDLED\n", cmd, task); + return BLK_EH_HANDLED; } if (!(task->task_state_flags & SAS_TASK_AT_INITIATOR)) { spin_unlock_irqrestore(&task->task_state_lock, flags); SAS_DPRINTK("command 0x%p, task 0x%p, not at initiator: " - "EH_RESET_TIMER\n", + "BLK_EH_RESET_TIMER\n", cmd, task); - return EH_RESET_TIMER; + return BLK_EH_RESET_TIMER; } task->task_state_flags |= SAS_TASK_STATE_ABORTED; spin_unlock_irqrestore(&task->task_state_lock, flags); - SAS_DPRINTK("command 0x%p, task 0x%p, timed out: EH_NOT_HANDLED\n", + SAS_DPRINTK("command 0x%p, task 0x%p, timed out: BLK_EH_NOT_HANDLED\n", cmd, task); - return EH_NOT_HANDLED; + return BLK_EH_NOT_HANDLED; } int sas_ioctl(struct scsi_device *sdev, int cmd, void __user *arg) @@ -1039,7 +1039,7 @@ void sas_task_abort(struct sas_task *task) return; } - scsi_req_abort_cmd(sc); + blk_abort_request(sc->request); scsi_schedule_eh(sc->device->host); } diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h index e0e018d1265..60a9e6e9384 100644 --- a/drivers/scsi/lpfc/lpfc.h +++ b/drivers/scsi/lpfc/lpfc.h @@ -34,7 +34,14 @@ struct lpfc_sli2_slim; #define LPFC_IOCB_LIST_CNT 2250 /* list of IOCBs for fast-path usage. */ #define LPFC_Q_RAMP_UP_INTERVAL 120 /* lun q_depth ramp up interval */ #define LPFC_VNAME_LEN 100 /* vport symbolic name length */ - +#define LPFC_TGTQ_INTERVAL 40000 /* Min amount of time between tgt + queue depth change in millisecs */ +#define LPFC_TGTQ_RAMPUP_PCENT 5 /* Target queue rampup in percentage */ +#define LPFC_MIN_TGT_QDEPTH 100 +#define LPFC_MAX_TGT_QDEPTH 0xFFFF + +#define LPFC_MAX_BUCKET_COUNT 20 /* Maximum no. of buckets for stat data + collection. */ /* * Following time intervals are used of adjusting SCSI device * queue depths when there are driver resource error or Firmware @@ -49,6 +56,9 @@ struct lpfc_sli2_slim; #define LPFC_HB_MBOX_INTERVAL 5 /* Heart beat interval in seconds. */ #define LPFC_HB_MBOX_TIMEOUT 30 /* Heart beat timeout in seconds. */ +/* Error Attention event polling interval */ +#define LPFC_ERATT_POLL_INTERVAL 5 /* EATT poll interval in seconds */ + /* Define macros for 64 bit support */ #define putPaddrLow(addr) ((uint32_t) (0xffffffff & (u64)(addr))) #define putPaddrHigh(addr) ((uint32_t) (0xffffffff & (((u64)(addr))>>32))) @@ -60,6 +70,9 @@ struct lpfc_sli2_slim; #define MAX_HBAEVT 32 +/* Number of MSI-X vectors the driver uses */ +#define LPFC_MSIX_VECTORS 2 + /* lpfc wait event data ready flag */ #define LPFC_DATA_READY (1<<0) @@ -357,6 +370,7 @@ struct lpfc_vport { uint32_t cfg_log_verbose; uint32_t cfg_max_luns; uint32_t cfg_enable_da_id; + uint32_t cfg_max_scsicmpl_time; uint32_t dev_loss_tmo_changed; @@ -369,6 +383,8 @@ struct lpfc_vport { struct lpfc_debugfs_trc *disc_trc; atomic_t disc_trc_cnt; #endif + uint8_t stat_data_enabled; + uint8_t stat_data_blocked; }; struct hbq_s { @@ -407,10 +423,11 @@ struct lpfc_hba { struct lpfc_sli sli; uint32_t sli_rev; /* SLI2 or SLI3 */ uint32_t sli3_options; /* Mask of enabled SLI3 options */ -#define LPFC_SLI3_ENABLED 0x01 -#define LPFC_SLI3_HBQ_ENABLED 0x02 -#define LPFC_SLI3_NPIV_ENABLED 0x04 -#define LPFC_SLI3_VPORT_TEARDOWN 0x08 +#define LPFC_SLI3_HBQ_ENABLED 0x01 +#define LPFC_SLI3_NPIV_ENABLED 0x02 +#define LPFC_SLI3_VPORT_TEARDOWN 0x04 +#define LPFC_SLI3_CRP_ENABLED 0x08 +#define LPFC_SLI3_INB_ENABLED 0x10 uint32_t iocb_cmd_size; uint32_t iocb_rsp_size; @@ -422,10 +439,20 @@ struct lpfc_hba { #define LS_NPIV_FAB_SUPPORTED 0x2 /* Fabric supports NPIV */ #define LS_IGNORE_ERATT 0x4 /* intr handler should ignore ERATT */ - struct lpfc_sli2_slim *slim2p; - struct lpfc_dmabuf hbqslimp; + uint32_t hba_flag; /* hba generic flags */ +#define HBA_ERATT_HANDLED 0x1 /* This flag is set when eratt handled */ + + struct lpfc_dmabuf slim2p; - dma_addr_t slim2p_mapping; + MAILBOX_t *mbox; + uint32_t *inb_ha_copy; + uint32_t *inb_counter; + uint32_t inb_last_counter; + uint32_t ha_copy; + struct _PCB *pcb; + struct _IOCB *IOCBs; + + struct lpfc_dmabuf hbqslimp; uint16_t pci_cfg_value; @@ -492,7 +519,7 @@ struct lpfc_hba { wait_queue_head_t work_waitq; struct task_struct *worker_thread; - long data_flags; + unsigned long data_flags; uint32_t hbq_in_use; /* HBQs in use flag */ struct list_head hbqbuf_in_list; /* in-fly hbq buffer list */ @@ -514,6 +541,7 @@ struct lpfc_hba { void __iomem *HCregaddr; /* virtual address for host ctl reg */ struct lpfc_hgp __iomem *host_gp; /* Host side get/put pointers */ + struct lpfc_pgp *port_gp; uint32_t __iomem *hbq_put; /* Address in SLIM to HBQ put ptrs */ uint32_t *hbq_get; /* Host mem address of HBQ get ptrs */ @@ -536,6 +564,7 @@ struct lpfc_hba { uint8_t soft_wwn_enable; struct timer_list fcp_poll_timer; + struct timer_list eratt_poll; /* * stat counters @@ -565,7 +594,7 @@ struct lpfc_hba { struct fc_host_statistics link_stats; enum intr_type_t intr_type; - struct msix_entry msix_entries[1]; + struct msix_entry msix_entries[LPFC_MSIX_VECTORS]; struct list_head port_list; struct lpfc_vport *pport; /* physical lpfc_vport pointer */ @@ -605,6 +634,7 @@ struct lpfc_hba { unsigned long last_completion_time; struct timer_list hb_tmofunc; uint8_t hb_outstanding; + enum hba_temp_state over_temp_state; /* ndlp reference management */ spinlock_t ndlp_lock; /* @@ -613,7 +643,19 @@ struct lpfc_hba { */ #define QUE_BUFTAG_BIT (1<<31) uint32_t buffer_tag_count; - enum hba_temp_state over_temp_state; + int wait_4_mlo_maint_flg; + wait_queue_head_t wait_4_mlo_m_q; + /* data structure used for latency data collection */ +#define LPFC_NO_BUCKET 0 +#define LPFC_LINEAR_BUCKET 1 +#define LPFC_POWER2_BUCKET 2 + uint8_t bucket_type; + uint32_t bucket_base; + uint32_t bucket_step; + +/* Maximum number of events that can be outstanding at any time*/ +#define LPFC_MAX_EVT_COUNT 512 + atomic_t fast_event_count; }; static inline struct Scsi_Host * @@ -650,15 +692,25 @@ lpfc_worker_wake_up(struct lpfc_hba *phba) return; } -#define FC_REG_DUMP_EVENT 0x10 /* Register for Dump events */ -#define FC_REG_TEMPERATURE_EVENT 0x20 /* Register for temperature - event */ +static inline void +lpfc_sli_read_hs(struct lpfc_hba *phba) +{ + /* + * There was a link/board error. Read the status register to retrieve + * the error event and process it. + */ + phba->sli.slistat.err_attn_event++; + + /* Save status info */ + phba->work_hs = readl(phba->HSregaddr); + phba->work_status[0] = readl(phba->MBslimaddr + 0xa8); + phba->work_status[1] = readl(phba->MBslimaddr + 0xac); + + /* Clear chip Host Attention error bit */ + writel(HA_ERATT, phba->HAregaddr); + readl(phba->HAregaddr); /* flush */ + phba->pport->stopped = 1; + + return; +} -struct temp_event { - uint32_t event_type; - uint32_t event_code; - uint32_t data; -}; -#define LPFC_CRIT_TEMP 0x1 -#define LPFC_THRESHOLD_TEMP 0x2 -#define LPFC_NORMAL_TEMP 0x3 diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 37bfa0bd1da..aa3d6277581 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -32,6 +32,7 @@ #include "lpfc_hw.h" #include "lpfc_sli.h" +#include "lpfc_nl.h" #include "lpfc_disc.h" #include "lpfc_scsi.h" #include "lpfc.h" @@ -49,6 +50,21 @@ #define LPFC_LINK_SPEED_BITMAP 0x00000117 #define LPFC_LINK_SPEED_STRING "0, 1, 2, 4, 8" +/** + * lpfc_jedec_to_ascii: Hex to ascii convertor according to JEDEC rules. + * @incr: integer to convert. + * @hdw: ascii string holding converted integer plus a string terminator. + * + * Description: + * JEDEC Joint Electron Device Engineering Council. + * Convert a 32 bit integer composed of 8 nibbles into an 8 byte ascii + * character string. The string is then terminated with a NULL in byte 9. + * Hex 0-9 becomes ascii '0' to '9'. + * Hex a-f becomes ascii '=' to 'B' capital B. + * + * Notes: + * Coded for 32 bit integers only. + **/ static void lpfc_jedec_to_ascii(int incr, char hdw[]) { @@ -65,6 +81,14 @@ lpfc_jedec_to_ascii(int incr, char hdw[]) return; } +/** + * lpfc_drvr_version_show: Return the Emulex driver string with version number. + * @dev: class unused variable. + * @attr: device attribute, not used. + * @buf: on return contains the module description text. + * + * Returns: size of formatted string. + **/ static ssize_t lpfc_drvr_version_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -72,6 +96,14 @@ lpfc_drvr_version_show(struct device *dev, struct device_attribute *attr, return snprintf(buf, PAGE_SIZE, LPFC_MODULE_DESC "\n"); } +/** + * lpfc_info_show: Return some pci info about the host in ascii. + * @dev: class converted to a Scsi_host structure. + * @attr: device attribute, not used. + * @buf: on return contains the formatted text from lpfc_info(). + * + * Returns: size of formatted string. + **/ static ssize_t lpfc_info_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -81,6 +113,14 @@ lpfc_info_show(struct device *dev, struct device_attribute *attr, return snprintf(buf, PAGE_SIZE, "%s\n",lpfc_info(host)); } +/** + * lpfc_serialnum_show: Return the hba serial number in ascii. + * @dev: class converted to a Scsi_host structure. + * @attr: device attribute, not used. + * @buf: on return contains the formatted text serial number. + * + * Returns: size of formatted string. + **/ static ssize_t lpfc_serialnum_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -92,6 +132,18 @@ lpfc_serialnum_show(struct device *dev, struct device_attribute *attr, return snprintf(buf, PAGE_SIZE, "%s\n",phba->SerialNumber); } +/** + * lpfc_temp_sensor_show: Return the temperature sensor level. + * @dev: class converted to a Scsi_host structure. + * @attr: device attribute, not used. + * @buf: on return contains the formatted support level. + * + * Description: + * Returns a number indicating the temperature sensor level currently + * supported, zero or one in ascii. + * + * Returns: size of formatted string. + **/ static ssize_t lpfc_temp_sensor_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -102,6 +154,14 @@ lpfc_temp_sensor_show(struct device *dev, struct device_attribute *attr, return snprintf(buf, PAGE_SIZE, "%d\n",phba->temp_sensor_support); } +/** + * lpfc_modeldesc_show: Return the model description of the hba. + * @dev: class converted to a Scsi_host structure. + * @attr: device attribute, not used. + * @buf: on return contains the scsi vpd model description. + * + * Returns: size of formatted string. + **/ static ssize_t lpfc_modeldesc_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -113,6 +173,14 @@ lpfc_modeldesc_show(struct device *dev, struct device_attribute *attr, return snprintf(buf, PAGE_SIZE, "%s\n",phba->ModelDesc); } +/** + * lpfc_modelname_show: Return the model name of the hba. + * @dev: class converted to a Scsi_host structure. + * @attr: device attribute, not used. + * @buf: on return contains the scsi vpd model name. + * + * Returns: size of formatted string. + **/ static ssize_t lpfc_modelname_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -124,6 +192,14 @@ lpfc_modelname_show(struct device *dev, struct device_attribute *attr, return snprintf(buf, PAGE_SIZE, "%s\n",phba->ModelName); } +/** + * lpfc_programtype_show: Return the program type of the hba. + * @dev: class converted to a Scsi_host structure. + * @attr: device attribute, not used. + * @buf: on return contains the scsi vpd program type. + * + * Returns: size of formatted string. + **/ static ssize_t lpfc_programtype_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -135,6 +211,33 @@ lpfc_programtype_show(struct device *dev, struct device_attribute *attr, return snprintf(buf, PAGE_SIZE, "%s\n",phba->ProgramType); } +/** + * lpfc_mlomgmt_show: Return the Menlo Maintenance sli flag. + * @dev: class converted to a Scsi_host structure. + * @attr: device attribute, not used. + * @buf: on return contains the Menlo Maintenance sli flag. + * + * Returns: size of formatted string. + **/ +static ssize_t +lpfc_mlomgmt_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct Scsi_Host *shost = class_to_shost(dev); + struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata; + struct lpfc_hba *phba = vport->phba; + + return snprintf(buf, PAGE_SIZE, "%d\n", + (phba->sli.sli_flag & LPFC_MENLO_MAINT)); +} + +/** + * lpfc_vportnum_show: Return the port number in ascii of the hba. + * @dev: class converted to a Scsi_host structure. + * @attr: device attribute, not used. + * @buf: on return contains scsi vpd program type. + * + * Returns: size of formatted string. + **/ static ssize_t lpfc_vportnum_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -146,6 +249,14 @@ lpfc_vportnum_show(struct device *dev, struct device_attribute *attr, return snprintf(buf, PAGE_SIZE, "%s\n",phba->Port); } +/** + * lpfc_fwrev_show: Return the firmware rev running in the hba. + * @dev: class converted to a Scsi_host structure. + * @attr: device attribute, not used. + * @buf: on return contains the scsi vpd program type. + * + * Returns: size of formatted string. + **/ static ssize_t lpfc_fwrev_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -159,6 +270,14 @@ lpfc_fwrev_show(struct device *dev, struct device_attribute *attr, return snprintf(buf, PAGE_SIZE, "%s, sli-%d\n", fwrev, phba->sli_rev); } +/** + * lpfc_hdw_show: Return the jedec information about the hba. + * @dev: class converted to a Scsi_host structure. + * @attr: device attribute, not used. + * @buf: on return contains the scsi vpd program type. + * + * Returns: size of formatted string. + **/ static ssize_t lpfc_hdw_show(struct device *dev, struct device_attribute *attr, char *buf) { @@ -171,6 +290,15 @@ lpfc_hdw_show(struct device *dev, struct device_attribute *attr, char *buf) lpfc_jedec_to_ascii(vp->rev.biuRev, hdw); return snprintf(buf, PAGE_SIZE, "%s\n", hdw); } + +/** + * lpfc_option_rom_version_show: Return the adapter ROM FCode version. + * @dev: class converted to a Scsi_host structure. + * @attr: device attribute, not used. + * @buf: on return contains the ROM and FCode ascii strings. + * + * Returns: size of formatted string. + **/ static ssize_t lpfc_option_rom_version_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -181,6 +309,18 @@ lpfc_option_rom_version_show(struct device *dev, struct device_attribute *attr, return snprintf(buf, PAGE_SIZE, "%s\n", phba->OptionROMVersion); } + +/** + * lpfc_state_show: Return the link state of the port. + * @dev: class converted to a Scsi_host structure. + * @attr: device attribute, not used. + * @buf: on return contains text describing the state of the link. + * + * Notes: + * The switch statement has no default so zero will be returned. + * + * Returns: size of formatted string. + **/ static ssize_t lpfc_link_state_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -232,8 +372,10 @@ lpfc_link_state_show(struct device *dev, struct device_attribute *attr, "Unknown\n"); break; } - - if (phba->fc_topology == TOPOLOGY_LOOP) { + if (phba->sli.sli_flag & LPFC_MENLO_MAINT) + len += snprintf(buf + len, PAGE_SIZE-len, + " Menlo Maint Mode\n"); + else if (phba->fc_topology == TOPOLOGY_LOOP) { if (vport->fc_flag & FC_PUBLIC_LOOP) len += snprintf(buf + len, PAGE_SIZE-len, " Public Loop\n"); @@ -253,6 +395,18 @@ lpfc_link_state_show(struct device *dev, struct device_attribute *attr, return len; } +/** + * lpfc_num_discovered_ports_show: Return sum of mapped and unmapped vports. + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: on return contains the sum of fc mapped and unmapped. + * + * Description: + * Returns the ascii text number of the sum of the fc mapped and unmapped + * vport counts. + * + * Returns: size of formatted string. + **/ static ssize_t lpfc_num_discovered_ports_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -264,7 +418,20 @@ lpfc_num_discovered_ports_show(struct device *dev, vport->fc_map_cnt + vport->fc_unmap_cnt); } - +/** + * lpfc_issue_lip: Misnomer, name carried over from long ago. + * @shost: Scsi_Host pointer. + * + * Description: + * Bring the link down gracefully then re-init the link. The firmware will + * re-init the fiber channel interface as required. Does not issue a LIP. + * + * Returns: + * -EPERM port offline or management commands are being blocked + * -ENOMEM cannot allocate memory for the mailbox command + * -EIO error sending the mailbox command + * zero for success + **/ static int lpfc_issue_lip(struct Scsi_Host *shost) { @@ -306,6 +473,21 @@ lpfc_issue_lip(struct Scsi_Host *shost) return 0; } +/** + * lpfc_do_offline: Issues a mailbox command to bring the link down. + * @phba: lpfc_hba pointer. + * @type: LPFC_EVT_OFFLINE, LPFC_EVT_WARM_START, LPFC_EVT_KILL. + * + * Notes: + * Assumes any error from lpfc_do_offline() will be negative. + * Can wait up to 5 seconds for the port ring buffers count + * to reach zero, prints a warning if it is not zero and continues. + * lpfc_workq_post_event() returns a non-zero return coce if call fails. + * + * Returns: + * -EIO error posting the event + * zero for success + **/ static int lpfc_do_offline(struct lpfc_hba *phba, uint32_t type) { @@ -353,6 +535,22 @@ lpfc_do_offline(struct lpfc_hba *phba, uint32_t type) return 0; } +/** + * lpfc_selective_reset: Offline then onlines the port. + * @phba: lpfc_hba pointer. + * + * Description: + * If the port is configured to allow a reset then the hba is brought + * offline then online. + * + * Notes: + * Assumes any error from lpfc_do_offline() will be negative. + * + * Returns: + * lpfc_do_offline() return code if not zero + * -EIO reset not configured or error posting the event + * zero for success + **/ static int lpfc_selective_reset(struct lpfc_hba *phba) { @@ -378,6 +576,27 @@ lpfc_selective_reset(struct lpfc_hba *phba) return 0; } +/** + * lpfc_issue_reset: Selectively resets an adapter. + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: containing the string "selective". + * @count: unused variable. + * + * Description: + * If the buf contains the string "selective" then lpfc_selective_reset() + * is called to perform the reset. + * + * Notes: + * Assumes any error from lpfc_selective_reset() will be negative. + * If lpfc_selective_reset() returns zero then the length of the buffer + * is returned which indicates succcess + * + * Returns: + * -EINVAL if the buffer does not contain the string "selective" + * length of buf if lpfc-selective_reset() if the call succeeds + * return value of lpfc_selective_reset() if the call fails +**/ static ssize_t lpfc_issue_reset(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) @@ -397,6 +616,14 @@ lpfc_issue_reset(struct device *dev, struct device_attribute *attr, return status; } +/** + * lpfc_nport_evt_cnt_show: Return the number of nport events. + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: on return contains the ascii number of nport events. + * + * Returns: size of formatted string. + **/ static ssize_t lpfc_nport_evt_cnt_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -408,6 +635,14 @@ lpfc_nport_evt_cnt_show(struct device *dev, struct device_attribute *attr, return snprintf(buf, PAGE_SIZE, "%d\n", phba->nport_event_cnt); } +/** + * lpfc_board_mode_show: Return the state of the board. + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: on return contains the state of the adapter. + * + * Returns: size of formatted string. + **/ static ssize_t lpfc_board_mode_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -429,6 +664,19 @@ lpfc_board_mode_show(struct device *dev, struct device_attribute *attr, return snprintf(buf, PAGE_SIZE, "%s\n", state); } +/** + * lpfc_board_mode_store: Puts the hba in online, offline, warm or error state. + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: containing one of the strings "online", "offline", "warm" or "error". + * @count: unused variable. + * + * Returns: + * -EACCES if enable hba reset not enabled + * -EINVAL if the buffer does not contain a valid string (see above) + * -EIO if lpfc_workq_post_event() or lpfc_do_offline() fails + * buf length greater than zero indicates success + **/ static ssize_t lpfc_board_mode_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) @@ -462,6 +710,24 @@ lpfc_board_mode_store(struct device *dev, struct device_attribute *attr, return -EIO; } +/** + * lpfc_get_hba_info: Return various bits of informaton about the adapter. + * @phba: pointer to the adapter structure. + * @mxri max xri count. + * @axri available xri count. + * @mrpi max rpi count. + * @arpi available rpi count. + * @mvpi max vpi count. + * @avpi available vpi count. + * + * Description: + * If an integer pointer for an count is not null then the value for the + * count is returned. + * + * Returns: + * zero on error + * one for success + **/ static int lpfc_get_hba_info(struct lpfc_hba *phba, uint32_t *mxri, uint32_t *axri, @@ -524,6 +790,20 @@ lpfc_get_hba_info(struct lpfc_hba *phba, return 1; } +/** + * lpfc_max_rpi_show: Return maximum rpi. + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: on return contains the maximum rpi count in decimal or "Unknown". + * + * Description: + * Calls lpfc_get_hba_info() asking for just the mrpi count. + * If lpfc_get_hba_info() returns zero (failure) the buffer text is set + * to "Unknown" and the buffer length is returned, therefore the caller + * must check for "Unknown" in the buffer to detect a failure. + * + * Returns: size of formatted string. + **/ static ssize_t lpfc_max_rpi_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -538,6 +818,20 @@ lpfc_max_rpi_show(struct device *dev, struct device_attribute *attr, return snprintf(buf, PAGE_SIZE, "Unknown\n"); } +/** + * lpfc_used_rpi_show: Return maximum rpi minus available rpi. + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: containing the used rpi count in decimal or "Unknown". + * + * Description: + * Calls lpfc_get_hba_info() asking for just the mrpi and arpi counts. + * If lpfc_get_hba_info() returns zero (failure) the buffer text is set + * to "Unknown" and the buffer length is returned, therefore the caller + * must check for "Unknown" in the buffer to detect a failure. + * + * Returns: size of formatted string. + **/ static ssize_t lpfc_used_rpi_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -552,6 +846,20 @@ lpfc_used_rpi_show(struct device *dev, struct device_attribute *attr, return snprintf(buf, PAGE_SIZE, "Unknown\n"); } +/** + * lpfc_max_xri_show: Return maximum xri. + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: on return contains the maximum xri count in decimal or "Unknown". + * + * Description: + * Calls lpfc_get_hba_info() asking for just the mrpi count. + * If lpfc_get_hba_info() returns zero (failure) the buffer text is set + * to "Unknown" and the buffer length is returned, therefore the caller + * must check for "Unknown" in the buffer to detect a failure. + * + * Returns: size of formatted string. + **/ static ssize_t lpfc_max_xri_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -566,6 +874,20 @@ lpfc_max_xri_show(struct device *dev, struct device_attribute *attr, return snprintf(buf, PAGE_SIZE, "Unknown\n"); } +/** + * lpfc_used_xri_show: Return maximum xpi minus the available xpi. + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: on return contains the used xri count in decimal or "Unknown". + * + * Description: + * Calls lpfc_get_hba_info() asking for just the mxri and axri counts. + * If lpfc_get_hba_info() returns zero (failure) the buffer text is set + * to "Unknown" and the buffer length is returned, therefore the caller + * must check for "Unknown" in the buffer to detect a failure. + * + * Returns: size of formatted string. + **/ static ssize_t lpfc_used_xri_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -580,6 +902,20 @@ lpfc_used_xri_show(struct device *dev, struct device_attribute *attr, return snprintf(buf, PAGE_SIZE, "Unknown\n"); } +/** + * lpfc_max_vpi_show: Return maximum vpi. + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: on return contains the maximum vpi count in decimal or "Unknown". + * + * Description: + * Calls lpfc_get_hba_info() asking for just the mvpi count. + * If lpfc_get_hba_info() returns zero (failure) the buffer text is set + * to "Unknown" and the buffer length is returned, therefore the caller + * must check for "Unknown" in the buffer to detect a failure. + * + * Returns: size of formatted string. + **/ static ssize_t lpfc_max_vpi_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -594,6 +930,20 @@ lpfc_max_vpi_show(struct device *dev, struct device_attribute *attr, return snprintf(buf, PAGE_SIZE, "Unknown\n"); } +/** + * lpfc_used_vpi_show: Return maximum vpi minus the available vpi. + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: on return contains the used vpi count in decimal or "Unknown". + * + * Description: + * Calls lpfc_get_hba_info() asking for just the mvpi and avpi counts. + * If lpfc_get_hba_info() returns zero (failure) the buffer text is set + * to "Unknown" and the buffer length is returned, therefore the caller + * must check for "Unknown" in the buffer to detect a failure. + * + * Returns: size of formatted string. + **/ static ssize_t lpfc_used_vpi_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -608,6 +958,19 @@ lpfc_used_vpi_show(struct device *dev, struct device_attribute *attr, return snprintf(buf, PAGE_SIZE, "Unknown\n"); } +/** + * lpfc_npiv_info_show: Return text about NPIV support for the adapter. + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: text that must be interpreted to determine if npiv is supported. + * + * Description: + * Buffer will contain text indicating npiv is not suppoerted on the port, + * the port is an NPIV physical port, or it is an npiv virtual port with + * the id of the vport. + * + * Returns: size of formatted string. + **/ static ssize_t lpfc_npiv_info_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -623,6 +986,17 @@ lpfc_npiv_info_show(struct device *dev, struct device_attribute *attr, return snprintf(buf, PAGE_SIZE, "NPIV Virtual (VPI %d)\n", vport->vpi); } +/** + * lpfc_poll_show: Return text about poll support for the adapter. + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: on return contains the cfg_poll in hex. + * + * Notes: + * cfg_poll should be a lpfc_polling_flags type. + * + * Returns: size of formatted string. + **/ static ssize_t lpfc_poll_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -634,6 +1008,20 @@ lpfc_poll_show(struct device *dev, struct device_attribute *attr, return snprintf(buf, PAGE_SIZE, "%#x\n", phba->cfg_poll); } +/** + * lpfc_poll_store: Set the value of cfg_poll for the adapter. + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: one or more lpfc_polling_flags values. + * @count: not used. + * + * Notes: + * buf contents converted to integer and checked for a valid value. + * + * Returns: + * -EINVAL if the buffer connot be converted or is out of range + * length of the buf on success + **/ static ssize_t lpfc_poll_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) @@ -692,6 +1080,20 @@ lpfc_poll_store(struct device *dev, struct device_attribute *attr, return strlen(buf); } +/** + * lpfc_param_show: Return a cfg attribute value in decimal. + * + * Description: + * Macro that given an attr e.g. hba_queue_depth expands + * into a function with the name lpfc_hba_queue_depth_show. + * + * lpfc_##attr##_show: Return the decimal value of an adapters cfg_xxx field. + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: on return contains the attribute value in decimal. + * + * Returns: size of formatted string. + **/ #define lpfc_param_show(attr) \ static ssize_t \ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \ @@ -706,6 +1108,20 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \ phba->cfg_##attr);\ } +/** + * lpfc_param_hex_show: Return a cfg attribute value in hex. + * + * Description: + * Macro that given an attr e.g. hba_queue_depth expands + * into a function with the name lpfc_hba_queue_depth_show + * + * lpfc_##attr##_show: Return the hex value of an adapters cfg_xxx field. + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: on return contains the attribute value in hexidecimal. + * + * Returns: size of formatted string. + **/ #define lpfc_param_hex_show(attr) \ static ssize_t \ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \ @@ -720,6 +1136,25 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \ phba->cfg_##attr);\ } +/** + * lpfc_param_init: Intializes a cfg attribute. + * + * Description: + * Macro that given an attr e.g. hba_queue_depth expands + * into a function with the name lpfc_hba_queue_depth_init. The macro also + * takes a default argument, a minimum and maximum argument. + * + * lpfc_##attr##_init: Initializes an attribute. + * @phba: pointer the the adapter structure. + * @val: integer attribute value. + * + * Validates the min and max values then sets the adapter config field + * accordingly, or uses the default if out of range and prints an error message. + * + * Returns: + * zero on success + * -EINVAL if default used + **/ #define lpfc_param_init(attr, default, minval, maxval) \ static int \ lpfc_##attr##_init(struct lpfc_hba *phba, int val) \ @@ -735,6 +1170,26 @@ lpfc_##attr##_init(struct lpfc_hba *phba, int val) \ return -EINVAL;\ } +/** + * lpfc_param_set: Set a cfg attribute value. + * + * Description: + * Macro that given an attr e.g. hba_queue_depth expands + * into a function with the name lpfc_hba_queue_depth_set + * + * lpfc_##attr##_set: Sets an attribute value. + * @phba: pointer the the adapter structure. + * @val: integer attribute value. + * + * Description: + * Validates the min and max values then sets the + * adapter config field if in the valid range. prints error message + * and does not set the parameter if invalid. + * + * Returns: + * zero on success + * -EINVAL if val is invalid + **/ #define lpfc_param_set(attr, default, minval, maxval) \ static int \ lpfc_##attr##_set(struct lpfc_hba *phba, int val) \ @@ -749,6 +1204,27 @@ lpfc_##attr##_set(struct lpfc_hba *phba, int val) \ return -EINVAL;\ } +/** + * lpfc_param_store: Set a vport attribute value. + * + * Description: + * Macro that given an attr e.g. hba_queue_depth expands + * into a function with the name lpfc_hba_queue_depth_store. + * + * lpfc_##attr##_store: Set an sttribute value. + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: contains the attribute value in ascii. + * @count: not used. + * + * Description: + * Convert the ascii text number to an integer, then + * use the lpfc_##attr##_set function to set the value. + * + * Returns: + * -EINVAL if val is invalid or lpfc_##attr##_set() fails + * length of buffer upon success. + **/ #define lpfc_param_store(attr) \ static ssize_t \ lpfc_##attr##_store(struct device *dev, struct device_attribute *attr, \ @@ -768,6 +1244,20 @@ lpfc_##attr##_store(struct device *dev, struct device_attribute *attr, \ return -EINVAL;\ } +/** + * lpfc_vport_param_show: Return decimal formatted cfg attribute value. + * + * Description: + * Macro that given an attr e.g. hba_queue_depth expands + * into a function with the name lpfc_hba_queue_depth_show + * + * lpfc_##attr##_show: prints the attribute value in decimal. + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: on return contains the attribute value in decimal. + * + * Returns: length of formatted string. + **/ #define lpfc_vport_param_show(attr) \ static ssize_t \ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \ @@ -780,6 +1270,21 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \ return snprintf(buf, PAGE_SIZE, "%d\n", vport->cfg_##attr);\ } +/** + * lpfc_vport_param_hex_show: Return hex formatted attribute value. + * + * Description: + * Macro that given an attr e.g. + * hba_queue_depth expands into a function with the name + * lpfc_hba_queue_depth_show + * + * lpfc_##attr##_show: prints the attribute value in hexidecimal. + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: on return contains the attribute value in hexidecimal. + * + * Returns: length of formatted string. + **/ #define lpfc_vport_param_hex_show(attr) \ static ssize_t \ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \ @@ -792,6 +1297,24 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \ return snprintf(buf, PAGE_SIZE, "%#x\n", vport->cfg_##attr);\ } +/** + * lpfc_vport_param_init: Initialize a vport cfg attribute. + * + * Description: + * Macro that given an attr e.g. hba_queue_depth expands + * into a function with the name lpfc_hba_queue_depth_init. The macro also + * takes a default argument, a minimum and maximum argument. + * + * lpfc_##attr##_init: validates the min and max values then sets the + * adapter config field accordingly, or uses the default if out of range + * and prints an error message. + * @phba: pointer the the adapter structure. + * @val: integer attribute value. + * + * Returns: + * zero on success + * -EINVAL if default used + **/ #define lpfc_vport_param_init(attr, default, minval, maxval) \ static int \ lpfc_##attr##_init(struct lpfc_vport *vport, int val) \ @@ -801,12 +1324,29 @@ lpfc_##attr##_init(struct lpfc_vport *vport, int val) \ return 0;\ }\ lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, \ - "0449 lpfc_"#attr" attribute cannot be set to %d, "\ + "0423 lpfc_"#attr" attribute cannot be set to %d, "\ "allowed range is ["#minval", "#maxval"]\n", val); \ vport->cfg_##attr = default;\ return -EINVAL;\ } +/** + * lpfc_vport_param_set: Set a vport cfg attribute. + * + * Description: + * Macro that given an attr e.g. hba_queue_depth expands + * into a function with the name lpfc_hba_queue_depth_set + * + * lpfc_##attr##_set: validates the min and max values then sets the + * adapter config field if in the valid range. prints error message + * and does not set the parameter if invalid. + * @phba: pointer the the adapter structure. + * @val: integer attribute value. + * + * Returns: + * zero on success + * -EINVAL if val is invalid + **/ #define lpfc_vport_param_set(attr, default, minval, maxval) \ static int \ lpfc_##attr##_set(struct lpfc_vport *vport, int val) \ @@ -816,11 +1356,28 @@ lpfc_##attr##_set(struct lpfc_vport *vport, int val) \ return 0;\ }\ lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, \ - "0450 lpfc_"#attr" attribute cannot be set to %d, "\ + "0424 lpfc_"#attr" attribute cannot be set to %d, "\ "allowed range is ["#minval", "#maxval"]\n", val); \ return -EINVAL;\ } +/** + * lpfc_vport_param_store: Set a vport attribute. + * + * Description: + * Macro that given an attr e.g. hba_queue_depth + * expands into a function with the name lpfc_hba_queue_depth_store + * + * lpfc_##attr##_store: convert the ascii text number to an integer, then + * use the lpfc_##attr##_set function to set the value. + * @cdev: class device that is converted into a Scsi_host. + * @buf: contains the attribute value in decimal. + * @count: not used. + * + * Returns: + * -EINVAL if val is invalid or lpfc_##attr##_set() fails + * length of buffer upon success. + **/ #define lpfc_vport_param_store(attr) \ static ssize_t \ lpfc_##attr##_store(struct device *dev, struct device_attribute *attr, \ @@ -941,6 +1498,7 @@ static DEVICE_ATTR(option_rom_version, S_IRUGO, lpfc_option_rom_version_show, NULL); static DEVICE_ATTR(num_discovered_ports, S_IRUGO, lpfc_num_discovered_ports_show, NULL); +static DEVICE_ATTR(menlo_mgmt_mode, S_IRUGO, lpfc_mlomgmt_show, NULL); static DEVICE_ATTR(nport_evt_cnt, S_IRUGO, lpfc_nport_evt_cnt_show, NULL); static DEVICE_ATTR(lpfc_drvr_version, S_IRUGO, lpfc_drvr_version_show, NULL); static DEVICE_ATTR(board_mode, S_IRUGO | S_IWUSR, @@ -958,6 +1516,17 @@ static DEVICE_ATTR(lpfc_temp_sensor, S_IRUGO, lpfc_temp_sensor_show, NULL); static char *lpfc_soft_wwn_key = "C99G71SL8032A"; +/** + * lpfc_soft_wwn_enable_store: Allows setting of the wwn if the key is valid. + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: containing the string lpfc_soft_wwn_key. + * @count: must be size of lpfc_soft_wwn_key. + * + * Returns: + * -EINVAL if the buffer does not contain lpfc_soft_wwn_key + * length of buf indicates success + **/ static ssize_t lpfc_soft_wwn_enable_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) @@ -994,6 +1563,14 @@ lpfc_soft_wwn_enable_store(struct device *dev, struct device_attribute *attr, static DEVICE_ATTR(lpfc_soft_wwn_enable, S_IWUSR, NULL, lpfc_soft_wwn_enable_store); +/** + * lpfc_soft_wwpn_show: Return the cfg soft ww port name of the adapter. + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: on return contains the wwpn in hexidecimal. + * + * Returns: size of formatted string. + **/ static ssize_t lpfc_soft_wwpn_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -1006,7 +1583,19 @@ lpfc_soft_wwpn_show(struct device *dev, struct device_attribute *attr, (unsigned long long)phba->cfg_soft_wwpn); } - +/** + * lpfc_soft_wwpn_store: Set the ww port name of the adapter. + * @dev class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: contains the wwpn in hexidecimal. + * @count: number of wwpn bytes in buf + * + * Returns: + * -EACCES hba reset not enabled, adapter over temp + * -EINVAL soft wwn not enabled, count is invalid, invalid wwpn byte invalid + * -EIO error taking adapter offline or online + * value of count on success + **/ static ssize_t lpfc_soft_wwpn_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) @@ -1080,6 +1669,14 @@ lpfc_soft_wwpn_store(struct device *dev, struct device_attribute *attr, static DEVICE_ATTR(lpfc_soft_wwpn, S_IRUGO | S_IWUSR,\ lpfc_soft_wwpn_show, lpfc_soft_wwpn_store); +/** + * lpfc_soft_wwnn_show: Return the cfg soft ww node name for the adapter. + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: on return contains the wwnn in hexidecimal. + * + * Returns: size of formatted string. + **/ static ssize_t lpfc_soft_wwnn_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -1090,7 +1687,16 @@ lpfc_soft_wwnn_show(struct device *dev, struct device_attribute *attr, (unsigned long long)phba->cfg_soft_wwnn); } - +/** + * lpfc_soft_wwnn_store: sets the ww node name of the adapter. + * @cdev: class device that is converted into a Scsi_host. + * @buf: contains the ww node name in hexidecimal. + * @count: number of wwnn bytes in buf. + * + * Returns: + * -EINVAL soft wwn not enabled, count is invalid, invalid wwnn byte invalid + * value of count on success + **/ static ssize_t lpfc_soft_wwnn_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) @@ -1178,6 +1784,15 @@ module_param(lpfc_nodev_tmo, int, 0); MODULE_PARM_DESC(lpfc_nodev_tmo, "Seconds driver will hold I/O waiting " "for a device to come back"); + +/** + * lpfc_nodev_tmo_show: Return the hba dev loss timeout value. + * @dev: class converted to a Scsi_host structure. + * @attr: device attribute, not used. + * @buf: on return contains the dev loss timeout in decimal. + * + * Returns: size of formatted string. + **/ static ssize_t lpfc_nodev_tmo_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -1189,6 +1804,21 @@ lpfc_nodev_tmo_show(struct device *dev, struct device_attribute *attr, return snprintf(buf, PAGE_SIZE, "%d\n", vport->cfg_devloss_tmo); } +/** + * lpfc_nodev_tmo_init: Set the hba nodev timeout value. + * @vport: lpfc vport structure pointer. + * @val: contains the nodev timeout value. + * + * Description: + * If the devloss tmo is already set then nodev tmo is set to devloss tmo, + * a kernel error message is printed and zero is returned. + * Else if val is in range then nodev tmo and devloss tmo are set to val. + * Otherwise nodev tmo is set to the default value. + * + * Returns: + * zero if already set or if val is in range + * -EINVAL val out of range + **/ static int lpfc_nodev_tmo_init(struct lpfc_vport *vport, int val) { @@ -1196,7 +1826,7 @@ lpfc_nodev_tmo_init(struct lpfc_vport *vport, int val) vport->cfg_nodev_tmo = vport->cfg_devloss_tmo; if (val != LPFC_DEF_DEVLOSS_TMO) lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, - "0402 Ignoring nodev_tmo module " + "0407 Ignoring nodev_tmo module " "parameter because devloss_tmo is " "set.\n"); return 0; @@ -1215,6 +1845,13 @@ lpfc_nodev_tmo_init(struct lpfc_vport *vport, int val) return -EINVAL; } +/** + * lpfc_update_rport_devloss_tmo: Update dev loss tmo value. + * @vport: lpfc vport structure pointer. + * + * Description: + * Update all the ndlp's dev loss tmo with the vport devloss tmo value. + **/ static void lpfc_update_rport_devloss_tmo(struct lpfc_vport *vport) { @@ -1229,6 +1866,21 @@ lpfc_update_rport_devloss_tmo(struct lpfc_vport *vport) spin_unlock_irq(shost->host_lock); } +/** + * lpfc_nodev_tmo_set: Set the vport nodev tmo and devloss tmo values. + * @vport: lpfc vport structure pointer. + * @val: contains the tmo value. + * + * Description: + * If the devloss tmo is already set or the vport dev loss tmo has changed + * then a kernel error message is printed and zero is returned. + * Else if val is in range then nodev tmo and devloss tmo are set to val. + * Otherwise nodev tmo is set to the default value. + * + * Returns: + * zero if already set or if val is in range + * -EINVAL val out of range + **/ static int lpfc_nodev_tmo_set(struct lpfc_vport *vport, int val) { @@ -1269,6 +1921,21 @@ MODULE_PARM_DESC(lpfc_devloss_tmo, lpfc_vport_param_init(devloss_tmo, LPFC_DEF_DEVLOSS_TMO, LPFC_MIN_DEVLOSS_TMO, LPFC_MAX_DEVLOSS_TMO) lpfc_vport_param_show(devloss_tmo) + +/** + * lpfc_devloss_tmo_set: Sets vport nodev tmo, devloss tmo values, changed bit. + * @vport: lpfc vport structure pointer. + * @val: contains the tmo value. + * + * Description: + * If val is in a valid range then set the vport nodev tmo, + * devloss tmo, also set the vport dev loss tmo changed flag. + * Else a kernel error message is printed. + * + * Returns: + * zero if val is in range + * -EINVAL val out of range + **/ static int lpfc_devloss_tmo_set(struct lpfc_vport *vport, int val) { @@ -1366,12 +2033,27 @@ MODULE_PARM_DESC(lpfc_restrict_login, "Restrict virtual ports login to remote initiators."); lpfc_vport_param_show(restrict_login); +/** + * lpfc_restrict_login_init: Set the vport restrict login flag. + * @vport: lpfc vport structure pointer. + * @val: contains the restrict login value. + * + * Description: + * If val is not in a valid range then log a kernel error message and set + * the vport restrict login to one. + * If the port type is physical clear the restrict login flag and return. + * Else set the restrict login flag to val. + * + * Returns: + * zero if val is in range + * -EINVAL val out of range + **/ static int lpfc_restrict_login_init(struct lpfc_vport *vport, int val) { if (val < 0 || val > 1) { lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, - "0449 lpfc_restrict_login attribute cannot " + "0422 lpfc_restrict_login attribute cannot " "be set to %d, allowed range is [0, 1]\n", val); vport->cfg_restrict_login = 1; @@ -1385,12 +2067,28 @@ lpfc_restrict_login_init(struct lpfc_vport *vport, int val) return 0; } +/** + * lpfc_restrict_login_set: Set the vport restrict login flag. + * @vport: lpfc vport structure pointer. + * @val: contains the restrict login value. + * + * Description: + * If val is not in a valid range then log a kernel error message and set + * the vport restrict login to one. + * If the port type is physical and the val is not zero log a kernel + * error message, clear the restrict login flag and return zero. + * Else set the restrict login flag to val. + * + * Returns: + * zero if val is in range + * -EINVAL val out of range + **/ static int lpfc_restrict_login_set(struct lpfc_vport *vport, int val) { if (val < 0 || val > 1) { lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, - "0450 lpfc_restrict_login attribute cannot " + "0425 lpfc_restrict_login attribute cannot " "be set to %d, allowed range is [0, 1]\n", val); vport->cfg_restrict_login = 1; @@ -1441,6 +2139,23 @@ LPFC_VPORT_ATTR_R(scan_down, 1, 0, 1, # Set loop mode if you want to run as an NL_Port. Value range is [0,0x6]. # Default value is 0. */ + +/** + * lpfc_topology_set: Set the adapters topology field. + * @phba: lpfc_hba pointer. + * @val: topology value. + * + * Description: + * If val is in a valid range then set the adapter's topology field and + * issue a lip; if the lip fails reset the topology to the old value. + * + * If the value is not in range log a kernel error message and return an error. + * + * Returns: + * zero if val is in range and lip okay + * non-zero return value from lpfc_issue_lip() + * -EINVAL val out of range + **/ static int lpfc_topology_set(struct lpfc_hba *phba, int val) { @@ -1469,6 +2184,335 @@ lpfc_param_store(topology) static DEVICE_ATTR(lpfc_topology, S_IRUGO | S_IWUSR, lpfc_topology_show, lpfc_topology_store); + +/** + * lpfc_stat_data_ctrl_store: write call back for lpfc_stat_data_ctrl + * sysfs file. + * @dev: Pointer to class device. + * @buf: Data buffer. + * @count: Size of the data buffer. + * + * This function get called when an user write to the lpfc_stat_data_ctrl + * sysfs file. This function parse the command written to the sysfs file + * and take appropriate action. These commands are used for controlling + * driver statistical data collection. + * Following are the command this function handles. + * + * setbucket <bucket_type> <base> <step> + * = Set the latency buckets. + * destroybucket = destroy all the buckets. + * start = start data collection + * stop = stop data collection + * reset = reset the collected data + **/ +static ssize_t +lpfc_stat_data_ctrl_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct Scsi_Host *shost = class_to_shost(dev); + struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; + struct lpfc_hba *phba = vport->phba; +#define LPFC_MAX_DATA_CTRL_LEN 1024 + static char bucket_data[LPFC_MAX_DATA_CTRL_LEN]; + unsigned long i; + char *str_ptr, *token; + struct lpfc_vport **vports; + struct Scsi_Host *v_shost; + char *bucket_type_str, *base_str, *step_str; + unsigned long base, step, bucket_type; + + if (!strncmp(buf, "setbucket", strlen("setbucket"))) { + if (strlen(buf) > LPFC_MAX_DATA_CTRL_LEN) + return -EINVAL; + + strcpy(bucket_data, buf); + str_ptr = &bucket_data[0]; + /* Ignore this token - this is command token */ + token = strsep(&str_ptr, "\t "); + if (!token) + return -EINVAL; + + bucket_type_str = strsep(&str_ptr, "\t "); + if (!bucket_type_str) + return -EINVAL; + + if (!strncmp(bucket_type_str, "linear", strlen("linear"))) + bucket_type = LPFC_LINEAR_BUCKET; + else if (!strncmp(bucket_type_str, "power2", strlen("power2"))) + bucket_type = LPFC_POWER2_BUCKET; + else + return -EINVAL; + + base_str = strsep(&str_ptr, "\t "); + if (!base_str) + return -EINVAL; + base = simple_strtoul(base_str, NULL, 0); + + step_str = strsep(&str_ptr, "\t "); + if (!step_str) + return -EINVAL; + step = simple_strtoul(step_str, NULL, 0); + if (!step) + return -EINVAL; + + /* Block the data collection for every vport */ + vports = lpfc_create_vport_work_array(phba); + if (vports == NULL) + return -ENOMEM; + + for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) { + v_shost = lpfc_shost_from_vport(vports[i]); + spin_lock_irq(v_shost->host_lock); + /* Block and reset data collection */ + vports[i]->stat_data_blocked = 1; + if (vports[i]->stat_data_enabled) + lpfc_vport_reset_stat_data(vports[i]); + spin_unlock_irq(v_shost->host_lock); + } + + /* Set the bucket attributes */ + phba->bucket_type = bucket_type; + phba->bucket_base = base; + phba->bucket_step = step; + + for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) { + v_shost = lpfc_shost_from_vport(vports[i]); + + /* Unblock data collection */ + spin_lock_irq(v_shost->host_lock); + vports[i]->stat_data_blocked = 0; + spin_unlock_irq(v_shost->host_lock); + } + lpfc_destroy_vport_work_array(phba, vports); + return strlen(buf); + } + + if (!strncmp(buf, "destroybucket", strlen("destroybucket"))) { + vports = lpfc_create_vport_work_array(phba); + if (vports == NULL) + return -ENOMEM; + + for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) { + v_shost = lpfc_shost_from_vport(vports[i]); + spin_lock_irq(shost->host_lock); + vports[i]->stat_data_blocked = 1; + lpfc_free_bucket(vport); + vport->stat_data_enabled = 0; + vports[i]->stat_data_blocked = 0; + spin_unlock_irq(shost->host_lock); + } + lpfc_destroy_vport_work_array(phba, vports); + phba->bucket_type = LPFC_NO_BUCKET; + phba->bucket_base = 0; + phba->bucket_step = 0; + return strlen(buf); + } + + if (!strncmp(buf, "start", strlen("start"))) { + /* If no buckets configured return error */ + if (phba->bucket_type == LPFC_NO_BUCKET) + return -EINVAL; + spin_lock_irq(shost->host_lock); + if (vport->stat_data_enabled) { + spin_unlock_irq(shost->host_lock); + return strlen(buf); + } + lpfc_alloc_bucket(vport); + vport->stat_data_enabled = 1; + spin_unlock_irq(shost->host_lock); + return strlen(buf); + } + + if (!strncmp(buf, "stop", strlen("stop"))) { + spin_lock_irq(shost->host_lock); + if (vport->stat_data_enabled == 0) { + spin_unlock_irq(shost->host_lock); + return strlen(buf); + } + lpfc_free_bucket(vport); + vport->stat_data_enabled = 0; + spin_unlock_irq(shost->host_lock); + return strlen(buf); + } + + if (!strncmp(buf, "reset", strlen("reset"))) { + if ((phba->bucket_type == LPFC_NO_BUCKET) + || !vport->stat_data_enabled) + return strlen(buf); + spin_lock_irq(shost->host_lock); + vport->stat_data_blocked = 1; + lpfc_vport_reset_stat_data(vport); + vport->stat_data_blocked = 0; + spin_unlock_irq(shost->host_lock); + return strlen(buf); + } + return -EINVAL; +} + + +/** + * lpfc_stat_data_ctrl_show: Read callback function for + * lpfc_stat_data_ctrl sysfs file. + * @dev: Pointer to class device object. + * @buf: Data buffer. + * + * This function is the read call back function for + * lpfc_stat_data_ctrl sysfs file. This function report the + * current statistical data collection state. + **/ +static ssize_t +lpfc_stat_data_ctrl_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(dev); + struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; + struct lpfc_hba *phba = vport->phba; + int index = 0; + int i; + char *bucket_type; + unsigned long bucket_value; + + switch (phba->bucket_type) { + case LPFC_LINEAR_BUCKET: + bucket_type = "linear"; + break; + case LPFC_POWER2_BUCKET: + bucket_type = "power2"; + break; + default: + bucket_type = "No Bucket"; + break; + } + + sprintf(&buf[index], "Statistical Data enabled :%d, " + "blocked :%d, Bucket type :%s, Bucket base :%d," + " Bucket step :%d\nLatency Ranges :", + vport->stat_data_enabled, vport->stat_data_blocked, + bucket_type, phba->bucket_base, phba->bucket_step); + index = strlen(buf); + if (phba->bucket_type != LPFC_NO_BUCKET) { + for (i = 0; i < LPFC_MAX_BUCKET_COUNT; i++) { + if (phba->bucket_type == LPFC_LINEAR_BUCKET) + bucket_value = phba->bucket_base + + phba->bucket_step * i; + else + bucket_value = phba->bucket_base + + (1 << i) * phba->bucket_step; + + if (index + 10 > PAGE_SIZE) + break; + sprintf(&buf[index], "%08ld ", bucket_value); + index = strlen(buf); + } + } + sprintf(&buf[index], "\n"); + return strlen(buf); +} + +/* + * Sysfs attribute to control the statistical data collection. + */ +static DEVICE_ATTR(lpfc_stat_data_ctrl, S_IRUGO | S_IWUSR, + lpfc_stat_data_ctrl_show, lpfc_stat_data_ctrl_store); + +/* + * lpfc_drvr_stat_data: sysfs attr to get driver statistical data. + */ + +/* + * Each Bucket takes 11 characters and 1 new line + 17 bytes WWN + * for each target. + */ +#define STAT_DATA_SIZE_PER_TARGET(NUM_BUCKETS) ((NUM_BUCKETS) * 11 + 18) +#define MAX_STAT_DATA_SIZE_PER_TARGET \ + STAT_DATA_SIZE_PER_TARGET(LPFC_MAX_BUCKET_COUNT) + + +/** + * sysfs_drvr_stat_data_read: Read callback function for lpfc_drvr_stat_data + * sysfs attribute. + * @kobj: Pointer to the kernel object + * @bin_attr: Attribute object + * @buff: Buffer pointer + * @off: File offset + * @count: Buffer size + * + * This function is the read call back function for lpfc_drvr_stat_data + * sysfs file. This function export the statistical data to user + * applications. + **/ +static ssize_t +sysfs_drvr_stat_data_read(struct kobject *kobj, struct bin_attribute *bin_attr, + char *buf, loff_t off, size_t count) +{ + struct device *dev = container_of(kobj, struct device, + kobj); + struct Scsi_Host *shost = class_to_shost(dev); + struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; + struct lpfc_hba *phba = vport->phba; + int i = 0, index = 0; + unsigned long nport_index; + struct lpfc_nodelist *ndlp = NULL; + nport_index = (unsigned long)off / + MAX_STAT_DATA_SIZE_PER_TARGET; + + if (!vport->stat_data_enabled || vport->stat_data_blocked + || (phba->bucket_type == LPFC_NO_BUCKET)) + return 0; + + spin_lock_irq(shost->host_lock); + list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) { + if (!NLP_CHK_NODE_ACT(ndlp) || !ndlp->lat_data) + continue; + + if (nport_index > 0) { + nport_index--; + continue; + } + + if ((index + MAX_STAT_DATA_SIZE_PER_TARGET) + > count) + break; + + if (!ndlp->lat_data) + continue; + + /* Print the WWN */ + sprintf(&buf[index], "%02x%02x%02x%02x%02x%02x%02x%02x:", + ndlp->nlp_portname.u.wwn[0], + ndlp->nlp_portname.u.wwn[1], + ndlp->nlp_portname.u.wwn[2], + ndlp->nlp_portname.u.wwn[3], + ndlp->nlp_portname.u.wwn[4], + ndlp->nlp_portname.u.wwn[5], + ndlp->nlp_portname.u.wwn[6], + ndlp->nlp_portname.u.wwn[7]); + + index = strlen(buf); + + for (i = 0; i < LPFC_MAX_BUCKET_COUNT; i++) { + sprintf(&buf[index], "%010u,", + ndlp->lat_data[i].cmd_count); + index = strlen(buf); + } + sprintf(&buf[index], "\n"); + index = strlen(buf); + } + spin_unlock_irq(shost->host_lock); + return index; +} + +static struct bin_attribute sysfs_drvr_stat_data_attr = { + .attr = { + .name = "lpfc_drvr_stat_data", + .mode = S_IRUSR, + .owner = THIS_MODULE, + }, + .size = LPFC_MAX_TARGET * MAX_STAT_DATA_SIZE_PER_TARGET, + .read = sysfs_drvr_stat_data_read, + .write = NULL, +}; + /* # lpfc_link_speed: Link speed selection for initializing the Fibre Channel # connection. @@ -1479,6 +2523,24 @@ static DEVICE_ATTR(lpfc_topology, S_IRUGO | S_IWUSR, # 8 = 8 Gigabaud # Value range is [0,8]. Default value is 0. */ + +/** + * lpfc_link_speed_set: Set the adapters link speed. + * @phba: lpfc_hba pointer. + * @val: link speed value. + * + * Description: + * If val is in a valid range then set the adapter's link speed field and + * issue a lip; if the lip fails reset the link speed to the old value. + * + * Notes: + * If the value is not in range log a kernel error message and return an error. + * + * Returns: + * zero if val is in range and lip okay. + * non-zero return value from lpfc_issue_lip() + * -EINVAL val out of range + **/ static int lpfc_link_speed_set(struct lpfc_hba *phba, int val) { @@ -1513,6 +2575,23 @@ static int lpfc_link_speed = 0; module_param(lpfc_link_speed, int, 0); MODULE_PARM_DESC(lpfc_link_speed, "Select link speed"); lpfc_param_show(link_speed) + +/** + * lpfc_link_speed_init: Set the adapters link speed. + * @phba: lpfc_hba pointer. + * @val: link speed value. + * + * Description: + * If val is in a valid range then set the adapter's link speed field. + * + * Notes: + * If the value is not in range log a kernel error message, clear the link + * speed and return an error. + * + * Returns: + * zero if val saved. + * -EINVAL val out of range + **/ static int lpfc_link_speed_init(struct lpfc_hba *phba, int val) { @@ -1522,7 +2601,7 @@ lpfc_link_speed_init(struct lpfc_hba *phba, int val) return 0; } lpfc_printf_log(phba, KERN_ERR, LOG_INIT, - "0454 lpfc_link_speed attribute cannot " + "0405 lpfc_link_speed attribute cannot " "be set to %d, allowed values are " "["LPFC_LINK_SPEED_STRING"]\n", val); phba->cfg_link_speed = 0; @@ -1548,6 +2627,48 @@ LPFC_VPORT_ATTR_RW(use_adisc, 0, 0, 1, "Use ADISC on rediscovery to authenticate FCP devices"); /* +# lpfc_max_scsicmpl_time: Use scsi command completion time to control I/O queue +# depth. Default value is 0. When the value of this parameter is zero the +# SCSI command completion time is not used for controlling I/O queue depth. When +# the parameter is set to a non-zero value, the I/O queue depth is controlled +# to limit the I/O completion time to the parameter value. +# The value is set in milliseconds. +*/ +static int lpfc_max_scsicmpl_time; +module_param(lpfc_max_scsicmpl_time, int, 0); +MODULE_PARM_DESC(lpfc_max_scsicmpl_time, + "Use command completion time to control queue depth"); +lpfc_vport_param_show(max_scsicmpl_time); +lpfc_vport_param_init(max_scsicmpl_time, 0, 0, 60000); +static int +lpfc_max_scsicmpl_time_set(struct lpfc_vport *vport, int val) +{ + struct Scsi_Host *shost = lpfc_shost_from_vport(vport); + struct lpfc_nodelist *ndlp, *next_ndlp; + + if (val == vport->cfg_max_scsicmpl_time) + return 0; + if ((val < 0) || (val > 60000)) + return -EINVAL; + vport->cfg_max_scsicmpl_time = val; + + spin_lock_irq(shost->host_lock); + list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) { + if (!NLP_CHK_NODE_ACT(ndlp)) + continue; + if (ndlp->nlp_state == NLP_STE_UNUSED_NODE) + continue; + ndlp->cmd_qdepth = LPFC_MAX_TGT_QDEPTH; + } + spin_unlock_irq(shost->host_lock); + return 0; +} +lpfc_vport_param_store(max_scsicmpl_time); +static DEVICE_ATTR(lpfc_max_scsicmpl_time, S_IRUGO | S_IWUSR, + lpfc_max_scsicmpl_time_show, + lpfc_max_scsicmpl_time_store); + +/* # lpfc_ack0: Use ACK0, instead of ACK1 for class 2 acknowledgement. Value # range is [0,1]. Default value is 0. */ @@ -1623,12 +2744,12 @@ LPFC_ATTR_RW(poll_tmo, 10, 1, 255, /* # lpfc_use_msi: Use MSI (Message Signaled Interrupts) in systems that # support this feature -# 0 = MSI disabled (default) +# 0 = MSI disabled # 1 = MSI enabled -# 2 = MSI-X enabled -# Value range is [0,2]. Default value is 0. +# 2 = MSI-X enabled (default) +# Value range is [0,2]. Default value is 2. */ -LPFC_ATTR_R(use_msi, 0, 0, 2, "Use Message Signaled Interrupts (1) or " +LPFC_ATTR_R(use_msi, 2, 0, 2, "Use Message Signaled Interrupts (1) or " "MSI-X (2), if possible"); /* @@ -1668,6 +2789,7 @@ struct device_attribute *lpfc_hba_attrs[] = { &dev_attr_option_rom_version, &dev_attr_link_state, &dev_attr_num_discovered_ports, + &dev_attr_menlo_mgmt_mode, &dev_attr_lpfc_drvr_version, &dev_attr_lpfc_temp_sensor, &dev_attr_lpfc_log_verbose, @@ -1709,6 +2831,8 @@ struct device_attribute *lpfc_hba_attrs[] = { &dev_attr_lpfc_enable_hba_reset, &dev_attr_lpfc_enable_hba_heartbeat, &dev_attr_lpfc_sg_seg_cnt, + &dev_attr_lpfc_max_scsicmpl_time, + &dev_attr_lpfc_stat_data_ctrl, NULL, }; @@ -1731,9 +2855,29 @@ struct device_attribute *lpfc_vport_attrs[] = { &dev_attr_nport_evt_cnt, &dev_attr_npiv_info, &dev_attr_lpfc_enable_da_id, + &dev_attr_lpfc_max_scsicmpl_time, + &dev_attr_lpfc_stat_data_ctrl, NULL, }; +/** + * sysfs_ctlreg_write: Write method for writing to ctlreg. + * @kobj: kernel kobject that contains the kernel class device. + * @bin_attr: kernel attributes passed to us. + * @buf: contains the data to be written to the adapter IOREG space. + * @off: offset into buffer to beginning of data. + * @count: bytes to transfer. + * + * Description: + * Accessed via /sys/class/scsi_host/hostxxx/ctlreg. + * Uses the adapter io control registers to send buf contents to the adapter. + * + * Returns: + * -ERANGE off and count combo out of range + * -EINVAL off, count or buff address invalid + * -EPERM adapter is offline + * value of count, buf contents written + **/ static ssize_t sysfs_ctlreg_write(struct kobject *kobj, struct bin_attribute *bin_attr, char *buf, loff_t off, size_t count) @@ -1766,6 +2910,23 @@ sysfs_ctlreg_write(struct kobject *kobj, struct bin_attribute *bin_attr, return count; } +/** + * sysfs_ctlreg_read: Read method for reading from ctlreg. + * @kobj: kernel kobject that contains the kernel class device. + * @bin_attr: kernel attributes passed to us. + * @buf: if succesful contains the data from the adapter IOREG space. + * @off: offset into buffer to beginning of data. + * @count: bytes to transfer. + * + * Description: + * Accessed via /sys/class/scsi_host/hostxxx/ctlreg. + * Uses the adapter io control registers to read data into buf. + * + * Returns: + * -ERANGE off and count combo out of range + * -EINVAL off, count or buff address invalid + * value of count, buf contents read + **/ static ssize_t sysfs_ctlreg_read(struct kobject *kobj, struct bin_attribute *bin_attr, char *buf, loff_t off, size_t count) @@ -1810,7 +2971,10 @@ static struct bin_attribute sysfs_ctlreg_attr = { .write = sysfs_ctlreg_write, }; - +/** + * sysfs_mbox_idle: frees the sysfs mailbox. + * @phba: lpfc_hba pointer + **/ static void sysfs_mbox_idle(struct lpfc_hba *phba) { @@ -1824,6 +2988,27 @@ sysfs_mbox_idle(struct lpfc_hba *phba) } } +/** + * sysfs_mbox_write: Write method for writing information via mbox. + * @kobj: kernel kobject that contains the kernel class device. + * @bin_attr: kernel attributes passed to us. + * @buf: contains the data to be written to sysfs mbox. + * @off: offset into buffer to beginning of data. + * @count: bytes to transfer. + * + * Description: + * Accessed via /sys/class/scsi_host/hostxxx/mbox. + * Uses the sysfs mbox to send buf contents to the adapter. + * + * Returns: + * -ERANGE off and count combo out of range + * -EINVAL off, count or buff address invalid + * zero if count is zero + * -EPERM adapter is offline + * -ENOMEM failed to allocate memory for the mail box + * -EAGAIN offset, state or mbox is NULL + * count number of bytes transferred + **/ static ssize_t sysfs_mbox_write(struct kobject *kobj, struct bin_attribute *bin_attr, char *buf, loff_t off, size_t count) @@ -1878,6 +3063,29 @@ sysfs_mbox_write(struct kobject *kobj, struct bin_attribute *bin_attr, return count; } +/** + * sysfs_mbox_read: Read method for reading information via mbox. + * @kobj: kernel kobject that contains the kernel class device. + * @bin_attr: kernel attributes passed to us. + * @buf: contains the data to be read from sysfs mbox. + * @off: offset into buffer to beginning of data. + * @count: bytes to transfer. + * + * Description: + * Accessed via /sys/class/scsi_host/hostxxx/mbox. + * Uses the sysfs mbox to receive data from to the adapter. + * + * Returns: + * -ERANGE off greater than mailbox command size + * -EINVAL off, count or buff address invalid + * zero if off and count are zero + * -EACCES adapter over temp + * -EPERM garbage can value to catch a multitude of errors + * -EAGAIN management IO not permitted, state or off error + * -ETIME mailbox timeout + * -ENODEV mailbox error + * count number of bytes transferred + **/ static ssize_t sysfs_mbox_read(struct kobject *kobj, struct bin_attribute *bin_attr, char *buf, loff_t off, size_t count) @@ -1954,6 +3162,8 @@ sysfs_mbox_read(struct kobject *kobj, struct bin_attribute *bin_attr, case MBX_DEL_LD_ENTRY: case MBX_SET_VARIABLE: case MBX_WRITE_WWN: + case MBX_PORT_CAPABILITIES: + case MBX_PORT_IOV_CONTROL: break; case MBX_READ_SPARM64: case MBX_READ_LA: @@ -1978,17 +3188,15 @@ sysfs_mbox_read(struct kobject *kobj, struct bin_attribute *bin_attr, /* If HBA encountered an error attention, allow only DUMP * or RESTART mailbox commands until the HBA is restarted. */ - if ((phba->pport->stopped) && - (phba->sysfs_mbox.mbox->mb.mbxCommand != - MBX_DUMP_MEMORY && - phba->sysfs_mbox.mbox->mb.mbxCommand != - MBX_RESTART && - phba->sysfs_mbox.mbox->mb.mbxCommand != - MBX_WRITE_VPARMS)) { - sysfs_mbox_idle(phba); - spin_unlock_irq(&phba->hbalock); - return -EPERM; - } + if (phba->pport->stopped && + phba->sysfs_mbox.mbox->mb.mbxCommand != MBX_DUMP_MEMORY && + phba->sysfs_mbox.mbox->mb.mbxCommand != MBX_RESTART && + phba->sysfs_mbox.mbox->mb.mbxCommand != MBX_WRITE_VPARMS && + phba->sysfs_mbox.mbox->mb.mbxCommand != MBX_WRITE_WWN) + lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX, + "1259 mbox: Issued mailbox cmd " + "0x%x while in stopped state.\n", + phba->sysfs_mbox.mbox->mb.mbxCommand); phba->sysfs_mbox.mbox->vport = vport; @@ -2059,6 +3267,14 @@ static struct bin_attribute sysfs_mbox_attr = { .write = sysfs_mbox_write, }; +/** + * lpfc_alloc_sysfs_attr: Creates the ctlreg and mbox entries. + * @vport: address of lpfc vport structure. + * + * Return codes: + * zero on success + * error return code from sysfs_create_bin_file() + **/ int lpfc_alloc_sysfs_attr(struct lpfc_vport *vport) { @@ -2075,18 +3291,30 @@ lpfc_alloc_sysfs_attr(struct lpfc_vport *vport) if (error) goto out_remove_ctlreg_attr; + error = sysfs_create_bin_file(&shost->shost_dev.kobj, + &sysfs_drvr_stat_data_attr); + if (error) + goto out_remove_mbox_attr; + return 0; +out_remove_mbox_attr: + sysfs_remove_bin_file(&shost->shost_dev.kobj, &sysfs_mbox_attr); out_remove_ctlreg_attr: sysfs_remove_bin_file(&shost->shost_dev.kobj, &sysfs_ctlreg_attr); out: return error; } +/** + * lpfc_free_sysfs_attr: Removes the ctlreg and mbox entries. + * @vport: address of lpfc vport structure. + **/ void lpfc_free_sysfs_attr(struct lpfc_vport *vport) { struct Scsi_Host *shost = lpfc_shost_from_vport(vport); - + sysfs_remove_bin_file(&shost->shost_dev.kobj, + &sysfs_drvr_stat_data_attr); sysfs_remove_bin_file(&shost->shost_dev.kobj, &sysfs_mbox_attr); sysfs_remove_bin_file(&shost->shost_dev.kobj, &sysfs_ctlreg_attr); } @@ -2096,6 +3324,10 @@ lpfc_free_sysfs_attr(struct lpfc_vport *vport) * Dynamic FC Host Attributes Support */ +/** + * lpfc_get_host_port_id: Copy the vport DID into the scsi host port id. + * @shost: kernel scsi host pointer. + **/ static void lpfc_get_host_port_id(struct Scsi_Host *shost) { @@ -2105,6 +3337,10 @@ lpfc_get_host_port_id(struct Scsi_Host *shost) fc_host_port_id(shost) = vport->fc_myDID; } +/** + * lpfc_get_host_port_type: Set the value of the scsi host port type. + * @shost: kernel scsi host pointer. + **/ static void lpfc_get_host_port_type(struct Scsi_Host *shost) { @@ -2133,6 +3369,10 @@ lpfc_get_host_port_type(struct Scsi_Host *shost) spin_unlock_irq(shost->host_lock); } +/** + * lpfc_get_host_port_state: Set the value of the scsi host port state. + * @shost: kernel scsi host pointer. + **/ static void lpfc_get_host_port_state(struct Scsi_Host *shost) { @@ -2167,6 +3407,10 @@ lpfc_get_host_port_state(struct Scsi_Host *shost) spin_unlock_irq(shost->host_lock); } +/** + * lpfc_get_host_speed: Set the value of the scsi host speed. + * @shost: kernel scsi host pointer. + **/ static void lpfc_get_host_speed(struct Scsi_Host *shost) { @@ -2199,6 +3443,10 @@ lpfc_get_host_speed(struct Scsi_Host *shost) spin_unlock_irq(shost->host_lock); } +/** + * lpfc_get_host_fabric_name: Set the value of the scsi host fabric name. + * @shost: kernel scsi host pointer. + **/ static void lpfc_get_host_fabric_name (struct Scsi_Host *shost) { @@ -2221,6 +3469,18 @@ lpfc_get_host_fabric_name (struct Scsi_Host *shost) fc_host_fabric_name(shost) = node_name; } +/** + * lpfc_get_stats: Return statistical information about the adapter. + * @shost: kernel scsi host pointer. + * + * Notes: + * NULL on error for link down, no mbox pool, sli2 active, + * management not allowed, memory allocation error, or mbox error. + * + * Returns: + * NULL for error + * address of the adapter host statistics + **/ static struct fc_host_statistics * lpfc_get_stats(struct Scsi_Host *shost) { @@ -2334,6 +3594,10 @@ lpfc_get_stats(struct Scsi_Host *shost) return hs; } +/** + * lpfc_reset_stats: Copy the adapter link stats information. + * @shost: kernel scsi host pointer. + **/ static void lpfc_reset_stats(struct Scsi_Host *shost) { @@ -2411,6 +3675,14 @@ lpfc_reset_stats(struct Scsi_Host *shost) * are no sysfs handlers for link_down_tmo. */ +/** + * lpfc_get_node_by_target: Return the nodelist for a target. + * @starget: kernel scsi target pointer. + * + * Returns: + * address of the node list if found + * NULL target not found + **/ static struct lpfc_nodelist * lpfc_get_node_by_target(struct scsi_target *starget) { @@ -2432,6 +3704,10 @@ lpfc_get_node_by_target(struct scsi_target *starget) return NULL; } +/** + * lpfc_get_starget_port_id: Set the target port id to the ndlp DID or -1. + * @starget: kernel scsi target pointer. + **/ static void lpfc_get_starget_port_id(struct scsi_target *starget) { @@ -2440,6 +3716,12 @@ lpfc_get_starget_port_id(struct scsi_target *starget) fc_starget_port_id(starget) = ndlp ? ndlp->nlp_DID : -1; } +/** + * lpfc_get_starget_node_name: Set the target node name. + * @starget: kernel scsi target pointer. + * + * Description: Set the target node name to the ndlp node name wwn or zero. + **/ static void lpfc_get_starget_node_name(struct scsi_target *starget) { @@ -2449,6 +3731,12 @@ lpfc_get_starget_node_name(struct scsi_target *starget) ndlp ? wwn_to_u64(ndlp->nlp_nodename.u.wwn) : 0; } +/** + * lpfc_get_starget_port_name: Set the target port name. + * @starget: kernel scsi target pointer. + * + * Description: set the target port name to the ndlp port name wwn or zero. + **/ static void lpfc_get_starget_port_name(struct scsi_target *starget) { @@ -2458,6 +3746,15 @@ lpfc_get_starget_port_name(struct scsi_target *starget) ndlp ? wwn_to_u64(ndlp->nlp_portname.u.wwn) : 0; } +/** + * lpfc_set_rport_loss_tmo: Set the rport dev loss tmo. + * @rport: fc rport address. + * @timeout: new value for dev loss tmo. + * + * Description: + * If timeout is non zero set the dev_loss_tmo to timeout, else set + * dev_loss_tmo to one. + **/ static void lpfc_set_rport_loss_tmo(struct fc_rport *rport, uint32_t timeout) { @@ -2467,7 +3764,18 @@ lpfc_set_rport_loss_tmo(struct fc_rport *rport, uint32_t timeout) rport->dev_loss_tmo = 1; } - +/** + * lpfc_rport_show_function: Return rport target information. + * + * Description: + * Macro that uses field to generate a function with the name lpfc_show_rport_ + * + * lpfc_show_rport_##field: returns the bytes formatted in buf + * @cdev: class converted to an fc_rport. + * @buf: on return contains the target_field or zero. + * + * Returns: size of formatted string. + **/ #define lpfc_rport_show_function(field, format_string, sz, cast) \ static ssize_t \ lpfc_show_rport_##field (struct device *dev, \ @@ -2602,6 +3910,10 @@ struct fc_function_template lpfc_vport_transport_functions = { .vport_disable = lpfc_vport_disable, }; +/** + * lpfc_get_cfgparam: Used during probe_one to init the adapter structure. + * @phba: lpfc_hba pointer. + **/ void lpfc_get_cfgparam(struct lpfc_hba *phba) { @@ -2637,6 +3949,10 @@ lpfc_get_cfgparam(struct lpfc_hba *phba) return; } +/** + * lpfc_get_vport_cfgparam: Used during port create, init the vport structure. + * @vport: lpfc_vport pointer. + **/ void lpfc_get_vport_cfgparam(struct lpfc_vport *vport) { @@ -2648,6 +3964,7 @@ lpfc_get_vport_cfgparam(struct lpfc_vport *vport) lpfc_restrict_login_init(vport, lpfc_restrict_login); lpfc_fcp_class_init(vport, lpfc_fcp_class); lpfc_use_adisc_init(vport, lpfc_use_adisc); + lpfc_max_scsicmpl_time_init(vport, lpfc_max_scsicmpl_time); lpfc_fdmi_on_init(vport, lpfc_fdmi_on); lpfc_discovery_threads_init(vport, lpfc_discovery_threads); lpfc_max_luns_init(vport, lpfc_max_luns); diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h index 1b8245213b8..044ef4057d2 100644 --- a/drivers/scsi/lpfc/lpfc_crtn.h +++ b/drivers/scsi/lpfc/lpfc_crtn.h @@ -18,7 +18,7 @@ * included with this package. * *******************************************************************/ -typedef int (*node_filter)(struct lpfc_nodelist *ndlp, void *param); +typedef int (*node_filter)(struct lpfc_nodelist *, void *); struct fc_rport; void lpfc_dump_mem(struct lpfc_hba *, LPFC_MBOXQ_t *, uint16_t); @@ -26,11 +26,11 @@ void lpfc_read_nv(struct lpfc_hba *, LPFC_MBOXQ_t *); void lpfc_config_async(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t); void lpfc_heart_beat(struct lpfc_hba *, LPFC_MBOXQ_t *); -int lpfc_read_la(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, - struct lpfc_dmabuf *mp); +int lpfc_read_la(struct lpfc_hba *, LPFC_MBOXQ_t *, struct lpfc_dmabuf *); void lpfc_clear_la(struct lpfc_hba *, LPFC_MBOXQ_t *); -void lpfc_issue_clear_la(struct lpfc_hba *phba, struct lpfc_vport *vport); +void lpfc_issue_clear_la(struct lpfc_hba *, struct lpfc_vport *); void lpfc_config_link(struct lpfc_hba *, LPFC_MBOXQ_t *); +int lpfc_config_msi(struct lpfc_hba *, LPFC_MBOXQ_t *); int lpfc_read_sparam(struct lpfc_hba *, LPFC_MBOXQ_t *, int); void lpfc_read_config(struct lpfc_hba *, LPFC_MBOXQ_t *); void lpfc_read_lnk_stat(struct lpfc_hba *, LPFC_MBOXQ_t *); @@ -43,7 +43,7 @@ void lpfc_unreg_vpi(struct lpfc_hba *, uint16_t, LPFC_MBOXQ_t *); void lpfc_init_link(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t, uint32_t); struct lpfc_vport *lpfc_find_vport_by_did(struct lpfc_hba *, uint32_t); -void lpfc_cleanup_rpis(struct lpfc_vport *vport, int remove); +void lpfc_cleanup_rpis(struct lpfc_vport *, int); int lpfc_linkdown(struct lpfc_hba *); void lpfc_port_link_failure(struct lpfc_vport *); void lpfc_mbx_cmpl_read_la(struct lpfc_hba *, LPFC_MBOXQ_t *); @@ -135,7 +135,7 @@ void lpfc_ct_unsol_event(struct lpfc_hba *, struct lpfc_sli_ring *, int lpfc_ns_cmd(struct lpfc_vport *, int, uint8_t, uint32_t); int lpfc_fdmi_cmd(struct lpfc_vport *, struct lpfc_nodelist *, int); void lpfc_fdmi_tmo(unsigned long); -void lpfc_fdmi_timeout_handler(struct lpfc_vport *vport); +void lpfc_fdmi_timeout_handler(struct lpfc_vport *); int lpfc_config_port_prep(struct lpfc_hba *); int lpfc_config_port_post(struct lpfc_hba *); @@ -155,6 +155,8 @@ int lpfc_sli_queue_setup(struct lpfc_hba *); void lpfc_handle_eratt(struct lpfc_hba *); void lpfc_handle_latt(struct lpfc_hba *); irqreturn_t lpfc_intr_handler(int, void *); +irqreturn_t lpfc_sp_intr_handler(int, void *); +irqreturn_t lpfc_fp_intr_handler(int, void *); void lpfc_read_rev(struct lpfc_hba *, LPFC_MBOXQ_t *); void lpfc_config_ring(struct lpfc_hba *, int, LPFC_MBOXQ_t *); @@ -175,11 +177,12 @@ void lpfc_mem_free(struct lpfc_hba *); void lpfc_stop_vport_timers(struct lpfc_vport *); void lpfc_poll_timeout(unsigned long ptr); -void lpfc_poll_start_timer(struct lpfc_hba * phba); -void lpfc_sli_poll_fcp_ring(struct lpfc_hba * hba); +void lpfc_poll_start_timer(struct lpfc_hba *); +void lpfc_poll_eratt(unsigned long); +void lpfc_sli_poll_fcp_ring(struct lpfc_hba *); struct lpfc_iocbq * lpfc_sli_get_iocbq(struct lpfc_hba *); -void lpfc_sli_release_iocbq(struct lpfc_hba * phba, struct lpfc_iocbq * iocb); -uint16_t lpfc_sli_next_iotag(struct lpfc_hba * phba, struct lpfc_iocbq * iocb); +void lpfc_sli_release_iocbq(struct lpfc_hba *, struct lpfc_iocbq *); +uint16_t lpfc_sli_next_iotag(struct lpfc_hba *, struct lpfc_iocbq *); void lpfc_reset_barrier(struct lpfc_hba * phba); int lpfc_sli_brdready(struct lpfc_hba *, uint32_t); @@ -187,11 +190,13 @@ int lpfc_sli_brdkill(struct lpfc_hba *); int lpfc_sli_brdreset(struct lpfc_hba *); int lpfc_sli_brdrestart(struct lpfc_hba *); int lpfc_sli_hba_setup(struct lpfc_hba *); +int lpfc_sli_config_port(struct lpfc_hba *, int); int lpfc_sli_host_down(struct lpfc_vport *); int lpfc_sli_hba_down(struct lpfc_hba *); int lpfc_sli_issue_mbox(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t); int lpfc_sli_handle_mb_event(struct lpfc_hba *); int lpfc_sli_flush_mbox_queue(struct lpfc_hba *); +int lpfc_sli_check_eratt(struct lpfc_hba *); int lpfc_sli_handle_slow_ring_event(struct lpfc_hba *, struct lpfc_sli_ring *, uint32_t); void lpfc_sli_def_mbox_cmpl(struct lpfc_hba *, LPFC_MBOXQ_t *); @@ -199,6 +204,7 @@ int lpfc_sli_issue_iocb(struct lpfc_hba *, struct lpfc_sli_ring *, struct lpfc_iocbq *, uint32_t); void lpfc_sli_pcimem_bcopy(void *, void *, uint32_t); void lpfc_sli_abort_iocb_ring(struct lpfc_hba *, struct lpfc_sli_ring *); +void lpfc_sli_flush_fcp_rings(struct lpfc_hba *); int lpfc_sli_ringpostbuf_put(struct lpfc_hba *, struct lpfc_sli_ring *, struct lpfc_dmabuf *); struct lpfc_dmabuf *lpfc_sli_ringpostbuf_get(struct lpfc_hba *, @@ -226,17 +232,13 @@ struct lpfc_nodelist *lpfc_findnode_did(struct lpfc_vport *, uint32_t); struct lpfc_nodelist *lpfc_findnode_wwpn(struct lpfc_vport *, struct lpfc_name *); -int lpfc_sli_issue_mbox_wait(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq, - uint32_t timeout); +int lpfc_sli_issue_mbox_wait(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t); -int lpfc_sli_issue_iocb_wait(struct lpfc_hba * phba, - struct lpfc_sli_ring * pring, - struct lpfc_iocbq * piocb, - struct lpfc_iocbq * prspiocbq, - uint32_t timeout); -void lpfc_sli_abort_fcp_cmpl(struct lpfc_hba * phba, - struct lpfc_iocbq * cmdiocb, - struct lpfc_iocbq * rspiocb); +int lpfc_sli_issue_iocb_wait(struct lpfc_hba *, struct lpfc_sli_ring *, + struct lpfc_iocbq *, struct lpfc_iocbq *, + uint32_t); +void lpfc_sli_abort_fcp_cmpl(struct lpfc_hba *, struct lpfc_iocbq *, + struct lpfc_iocbq *); void lpfc_sli_free_hbq(struct lpfc_hba *, struct hbq_dmabuf *); @@ -269,7 +271,7 @@ void lpfc_dev_loss_tmo_callbk(struct fc_rport *rport); struct lpfc_vport *lpfc_create_port(struct lpfc_hba *, int, struct device *); int lpfc_vport_disable(struct fc_vport *fc_vport, bool disable); -void lpfc_mbx_unreg_vpi(struct lpfc_vport *); +int lpfc_mbx_unreg_vpi(struct lpfc_vport *); void destroy_port(struct lpfc_vport *); int lpfc_get_instance(void); void lpfc_host_attrib_init(struct Scsi_Host *); @@ -290,6 +292,13 @@ void lpfc_unblock_fabric_iocbs(struct lpfc_hba *); void lpfc_adjust_queue_depth(struct lpfc_hba *); void lpfc_ramp_down_queue_handler(struct lpfc_hba *); void lpfc_ramp_up_queue_handler(struct lpfc_hba *); +void lpfc_scsi_dev_block(struct lpfc_hba *); + +void +lpfc_send_els_failure_event(struct lpfc_hba *, struct lpfc_iocbq *, + struct lpfc_iocbq *); +struct lpfc_fast_path_event *lpfc_alloc_fast_evt(struct lpfc_hba *); +void lpfc_free_fast_evt(struct lpfc_hba *, struct lpfc_fast_path_event *); #define ScsiResult(host_code, scsi_code) (((host_code) << 16) | scsi_code) #define HBA_EVENT_RSCN 5 diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c index 7fc74cf5823..26dae8bae2d 100644 --- a/drivers/scsi/lpfc/lpfc_ct.c +++ b/drivers/scsi/lpfc/lpfc_ct.c @@ -34,6 +34,7 @@ #include "lpfc_hw.h" #include "lpfc_sli.h" +#include "lpfc_nl.h" #include "lpfc_disc.h" #include "lpfc_scsi.h" #include "lpfc.h" @@ -134,25 +135,24 @@ lpfc_ct_unsol_event(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, } list_del(&head); } else { - struct lpfc_iocbq *next; - - list_for_each_entry_safe(iocbq, next, &piocbq->list, list) { + INIT_LIST_HEAD(&head); + list_add_tail(&head, &piocbq->list); + list_for_each_entry(iocbq, &head, list) { icmd = &iocbq->iocb; if (icmd->ulpBdeCount == 0) - lpfc_ct_unsol_buffer(phba, piocbq, NULL, 0); + lpfc_ct_unsol_buffer(phba, iocbq, NULL, 0); for (i = 0; i < icmd->ulpBdeCount; i++) { paddr = getPaddr(icmd->un.cont64[i].addrHigh, icmd->un.cont64[i].addrLow); mp = lpfc_sli_ringpostbuf_get(phba, pring, paddr); size = icmd->un.cont64[i].tus.f.bdeSize; - lpfc_ct_unsol_buffer(phba, piocbq, mp, size); + lpfc_ct_unsol_buffer(phba, iocbq, mp, size); lpfc_in_buf_free(phba, mp); } - list_del(&iocbq->list); - lpfc_sli_release_iocbq(phba, iocbq); lpfc_post_buffer(phba, pring, i); } + list_del(&head); } } @@ -212,7 +212,7 @@ lpfc_alloc_ct_rsp(struct lpfc_hba *phba, int cmdcode, struct ulp_bde64 *bpl, else list_add_tail(&mp->list, &mlist->list); - bpl->tus.f.bdeFlags = BUFF_USE_RCV; + bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64I; /* build buffer ptr list for IOCB */ bpl->addrLow = le32_to_cpu(putPaddrLow(mp->phys) ); bpl->addrHigh = le32_to_cpu(putPaddrHigh(mp->phys) ); @@ -283,7 +283,7 @@ lpfc_gen_req(struct lpfc_vport *vport, struct lpfc_dmabuf *bmp, icmd->un.genreq64.bdl.ulpIoTag32 = 0; icmd->un.genreq64.bdl.addrHigh = putPaddrHigh(bmp->phys); icmd->un.genreq64.bdl.addrLow = putPaddrLow(bmp->phys); - icmd->un.genreq64.bdl.bdeFlags = BUFF_TYPE_BDL; + icmd->un.genreq64.bdl.bdeFlags = BUFF_TYPE_BLP_64; icmd->un.genreq64.bdl.bdeSize = (num_entry * sizeof (struct ulp_bde64)); if (usr_flg) @@ -861,7 +861,7 @@ lpfc_cmpl_ct(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, retry++; lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY, - "0216 Retrying NS cmd %x\n", cmdcode); + "0250 Retrying NS cmd %x\n", cmdcode); rc = lpfc_ns_cmd(vport, cmdcode, retry, 0); if (rc == 0) goto out; diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c index 094b47e94b2..771920bdde4 100644 --- a/drivers/scsi/lpfc/lpfc_debugfs.c +++ b/drivers/scsi/lpfc/lpfc_debugfs.c @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2007 Emulex. All rights reserved. * + * Copyright (C) 2007-2008 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * * @@ -35,6 +35,7 @@ #include "lpfc_hw.h" #include "lpfc_sli.h" +#include "lpfc_nl.h" #include "lpfc_disc.h" #include "lpfc_scsi.h" #include "lpfc.h" @@ -46,13 +47,14 @@ #include "lpfc_debugfs.h" #ifdef CONFIG_LPFC_DEBUG_FS -/* debugfs interface +/** + * debugfs interface * * To access this interface the user should: * # mkdir /debug * # mount -t debugfs none /debug * - * The lpfc debugfs directory hierachy is: + * The lpfc debugfs directory hierarchy is: * lpfc/lpfcX/vportY * where X is the lpfc hba unique_id * where Y is the vport VPI on that hba @@ -61,14 +63,21 @@ * discovery_trace * This is an ACSII readable file that contains a trace of the last * lpfc_debugfs_max_disc_trc events that happened on a specific vport. - * See lpfc_debugfs.h for different categories of - * discovery events. To enable the discovery trace, the following - * module parameters must be set: + * See lpfc_debugfs.h for different categories of discovery events. + * To enable the discovery trace, the following module parameters must be set: * lpfc_debugfs_enable=1 Turns on lpfc debugfs filesystem support * lpfc_debugfs_max_disc_trc=X Where X is the event trace depth for * EACH vport. X MUST also be a power of 2. * lpfc_debugfs_mask_disc_trc=Y Where Y is an event mask as defined in * lpfc_debugfs.h . + * + * slow_ring_trace + * This is an ACSII readable file that contains a trace of the last + * lpfc_debugfs_max_slow_ring_trc events that happened on a specific HBA. + * To enable the slow ring trace, the following module parameters must be set: + * lpfc_debugfs_enable=1 Turns on lpfc debugfs filesystem support + * lpfc_debugfs_max_slow_ring_trc=X Where X is the event trace depth for + * the HBA. X MUST also be a power of 2. */ static int lpfc_debugfs_enable = 1; module_param(lpfc_debugfs_enable, int, 0); @@ -117,6 +126,25 @@ struct lpfc_debug { static atomic_t lpfc_debugfs_seq_trc_cnt = ATOMIC_INIT(0); static unsigned long lpfc_debugfs_start_time = 0L; +/** + * lpfc_debugfs_disc_trc_data - Dump discovery logging to a buffer. + * @vport: The vport to gather the log info from. + * @buf: The buffer to dump log into. + * @size: The maximum amount of data to process. + * + * Description: + * This routine gathers the lpfc discovery debugfs data from the @vport and + * dumps it to @buf up to @size number of bytes. It will start at the next entry + * in the log and process the log until the end of the buffer. Then it will + * gather from the beginning of the log and process until the current entry. + * + * Notes: + * Discovery logging will be disabled while while this routine dumps the log. + * + * Return Value: + * This routine returns the amount of bytes that were dumped into @buf and will + * not exceed @size. + **/ static int lpfc_debugfs_disc_trc_data(struct lpfc_vport *vport, char *buf, int size) { @@ -125,7 +153,6 @@ lpfc_debugfs_disc_trc_data(struct lpfc_vport *vport, char *buf, int size) struct lpfc_debugfs_trc *dtp; char buffer[LPFC_DEBUG_TRC_ENTRY_SIZE]; - enable = lpfc_debugfs_enable; lpfc_debugfs_enable = 0; @@ -159,6 +186,25 @@ lpfc_debugfs_disc_trc_data(struct lpfc_vport *vport, char *buf, int size) return len; } +/** + * lpfc_debugfs_slow_ring_trc_data - Dump slow ring logging to a buffer. + * @phba: The HBA to gather the log info from. + * @buf: The buffer to dump log into. + * @size: The maximum amount of data to process. + * + * Description: + * This routine gathers the lpfc slow ring debugfs data from the @phba and + * dumps it to @buf up to @size number of bytes. It will start at the next entry + * in the log and process the log until the end of the buffer. Then it will + * gather from the beginning of the log and process until the current entry. + * + * Notes: + * Slow ring logging will be disabled while while this routine dumps the log. + * + * Return Value: + * This routine returns the amount of bytes that were dumped into @buf and will + * not exceed @size. + **/ static int lpfc_debugfs_slow_ring_trc_data(struct lpfc_hba *phba, char *buf, int size) { @@ -203,6 +249,25 @@ lpfc_debugfs_slow_ring_trc_data(struct lpfc_hba *phba, char *buf, int size) static int lpfc_debugfs_last_hbq = -1; +/** + * lpfc_debugfs_hbqinfo_data - Dump host buffer queue info to a buffer. + * @phba: The HBA to gather host buffer info from. + * @buf: The buffer to dump log into. + * @size: The maximum amount of data to process. + * + * Description: + * This routine dumps the host buffer queue info from the @phba to @buf up to + * @size number of bytes. A header that describes the current hbq state will be + * dumped to @buf first and then info on each hbq entry will be dumped to @buf + * until @size bytes have been dumped or all the hbq info has been dumped. + * + * Notes: + * This routine will rotate through each configured HBQ each time called. + * + * Return Value: + * This routine returns the amount of bytes that were dumped into @buf and will + * not exceed @size. + **/ static int lpfc_debugfs_hbqinfo_data(struct lpfc_hba *phba, char *buf, int size) { @@ -303,6 +368,24 @@ skipit: static int lpfc_debugfs_last_hba_slim_off; +/** + * lpfc_debugfs_dumpHBASlim_data - Dump HBA SLIM info to a buffer. + * @phba: The HBA to gather SLIM info from. + * @buf: The buffer to dump log into. + * @size: The maximum amount of data to process. + * + * Description: + * This routine dumps the current contents of HBA SLIM for the HBA associated + * with @phba to @buf up to @size bytes of data. This is the raw HBA SLIM data. + * + * Notes: + * This routine will only dump up to 1024 bytes of data each time called and + * should be called multiple times to dump the entire HBA SLIM. + * + * Return Value: + * This routine returns the amount of bytes that were dumped into @buf and will + * not exceed @size. + **/ static int lpfc_debugfs_dumpHBASlim_data(struct lpfc_hba *phba, char *buf, int size) { @@ -342,6 +425,21 @@ lpfc_debugfs_dumpHBASlim_data(struct lpfc_hba *phba, char *buf, int size) return len; } +/** + * lpfc_debugfs_dumpHostSlim_data - Dump host SLIM info to a buffer. + * @phba: The HBA to gather Host SLIM info from. + * @buf: The buffer to dump log into. + * @size: The maximum amount of data to process. + * + * Description: + * This routine dumps the current contents of host SLIM for the host associated + * with @phba to @buf up to @size bytes of data. The dump will contain the + * Mailbox, PCB, Rings, and Registers that are located in host memory. + * + * Return Value: + * This routine returns the amount of bytes that were dumped into @buf and will + * not exceed @size. + **/ static int lpfc_debugfs_dumpHostSlim_data(struct lpfc_hba *phba, char *buf, int size) { @@ -357,7 +455,7 @@ lpfc_debugfs_dumpHostSlim_data(struct lpfc_hba *phba, char *buf, int size) spin_lock_irq(&phba->hbalock); len += snprintf(buf+len, size-len, "SLIM Mailbox\n"); - ptr = (uint32_t *)phba->slim2p; + ptr = (uint32_t *)phba->slim2p.virt; i = sizeof(MAILBOX_t); while (i > 0) { len += snprintf(buf+len, size-len, @@ -370,7 +468,7 @@ lpfc_debugfs_dumpHostSlim_data(struct lpfc_hba *phba, char *buf, int size) } len += snprintf(buf+len, size-len, "SLIM PCB\n"); - ptr = (uint32_t *)&phba->slim2p->pcb; + ptr = (uint32_t *)phba->pcb; i = sizeof(PCB_t); while (i > 0) { len += snprintf(buf+len, size-len, @@ -382,44 +480,16 @@ lpfc_debugfs_dumpHostSlim_data(struct lpfc_hba *phba, char *buf, int size) off += (8 * sizeof(uint32_t)); } - pgpp = (struct lpfc_pgp *)&phba->slim2p->mbx.us.s3_pgp.port; - pring = &psli->ring[0]; - len += snprintf(buf+len, size-len, - "Ring 0: CMD GetInx:%d (Max:%d Next:%d Local:%d flg:x%x) " - "RSP PutInx:%d Max:%d\n", - pgpp->cmdGetInx, pring->numCiocb, - pring->next_cmdidx, pring->local_getidx, pring->flag, - pgpp->rspPutInx, pring->numRiocb); - pgpp++; - - pring = &psli->ring[1]; - len += snprintf(buf+len, size-len, - "Ring 1: CMD GetInx:%d (Max:%d Next:%d Local:%d flg:x%x) " - "RSP PutInx:%d Max:%d\n", - pgpp->cmdGetInx, pring->numCiocb, - pring->next_cmdidx, pring->local_getidx, pring->flag, - pgpp->rspPutInx, pring->numRiocb); - pgpp++; - - pring = &psli->ring[2]; - len += snprintf(buf+len, size-len, - "Ring 2: CMD GetInx:%d (Max:%d Next:%d Local:%d flg:x%x) " - "RSP PutInx:%d Max:%d\n", - pgpp->cmdGetInx, pring->numCiocb, - pring->next_cmdidx, pring->local_getidx, pring->flag, - pgpp->rspPutInx, pring->numRiocb); - pgpp++; - - pring = &psli->ring[3]; - len += snprintf(buf+len, size-len, - "Ring 3: CMD GetInx:%d (Max:%d Next:%d Local:%d flg:x%x) " - "RSP PutInx:%d Max:%d\n", - pgpp->cmdGetInx, pring->numCiocb, - pring->next_cmdidx, pring->local_getidx, pring->flag, - pgpp->rspPutInx, pring->numRiocb); - - - ptr = (uint32_t *)&phba->slim2p->mbx.us.s3_pgp.hbq_get; + for (i = 0; i < 4; i++) { + pgpp = &phba->port_gp[i]; + pring = &psli->ring[i]; + len += snprintf(buf+len, size-len, + "Ring %d: CMD GetInx:%d (Max:%d Next:%d " + "Local:%d flg:x%x) RSP PutInx:%d Max:%d\n", + i, pgpp->cmdGetInx, pring->numCiocb, + pring->next_cmdidx, pring->local_getidx, + pring->flag, pgpp->rspPutInx, pring->numRiocb); + } word0 = readl(phba->HAregaddr); word1 = readl(phba->CAregaddr); word2 = readl(phba->HSregaddr); @@ -430,6 +500,21 @@ lpfc_debugfs_dumpHostSlim_data(struct lpfc_hba *phba, char *buf, int size) return len; } +/** + * lpfc_debugfs_nodelist_data - Dump target node list to a buffer. + * @vport: The vport to gather target node info from. + * @buf: The buffer to dump log into. + * @size: The maximum amount of data to process. + * + * Description: + * This routine dumps the current target node list associated with @vport to + * @buf up to @size bytes of data. Each node entry in the dump will contain a + * node state, DID, WWPN, WWNN, RPI, flags, type, and other useful fields. + * + * Return Value: + * This routine returns the amount of bytes that were dumped into @buf and will + * not exceed @size. + **/ static int lpfc_debugfs_nodelist_data(struct lpfc_vport *vport, char *buf, int size) { @@ -513,7 +598,22 @@ lpfc_debugfs_nodelist_data(struct lpfc_vport *vport, char *buf, int size) } #endif - +/** + * lpfc_debugfs_disc_trc - Store discovery trace log. + * @vport: The vport to associate this trace string with for retrieval. + * @mask: Log entry classification. + * @fmt: Format string to be displayed when dumping the log. + * @data1: 1st data parameter to be applied to @fmt. + * @data2: 2nd data parameter to be applied to @fmt. + * @data3: 3rd data parameter to be applied to @fmt. + * + * Description: + * This routine is used by the driver code to add a debugfs log entry to the + * discovery trace buffer associated with @vport. Only entries with a @mask that + * match the current debugfs discovery mask will be saved. Entries that do not + * match will be thrown away. @fmt, @data1, @data2, and @data3 are used like + * printf when displaying the log. + **/ inline void lpfc_debugfs_disc_trc(struct lpfc_vport *vport, int mask, char *fmt, uint32_t data1, uint32_t data2, uint32_t data3) @@ -542,6 +642,19 @@ lpfc_debugfs_disc_trc(struct lpfc_vport *vport, int mask, char *fmt, return; } +/** + * lpfc_debugfs_slow_ring_trc - Store slow ring trace log. + * @phba: The phba to associate this trace string with for retrieval. + * @fmt: Format string to be displayed when dumping the log. + * @data1: 1st data parameter to be applied to @fmt. + * @data2: 2nd data parameter to be applied to @fmt. + * @data3: 3rd data parameter to be applied to @fmt. + * + * Description: + * This routine is used by the driver code to add a debugfs log entry to the + * discovery trace buffer associated with @vport. @fmt, @data1, @data2, and + * @data3 are used like printf when displaying the log. + **/ inline void lpfc_debugfs_slow_ring_trc(struct lpfc_hba *phba, char *fmt, uint32_t data1, uint32_t data2, uint32_t data3) @@ -568,6 +681,21 @@ lpfc_debugfs_slow_ring_trc(struct lpfc_hba *phba, char *fmt, } #ifdef CONFIG_LPFC_DEBUG_FS +/** + * lpfc_debugfs_disc_trc_open - Open the discovery trace log. + * @inode: The inode pointer that contains a vport pointer. + * @file: The file pointer to attach the log output. + * + * Description: + * This routine is the entry point for the debugfs open file operation. It gets + * the vport from the i_private field in @inode, allocates the necessary buffer + * for the log, fills the buffer from the in-memory log for this vport, and then + * returns a pointer to that log in the private_data field in @file. + * + * Returns: + * This function returns zero if successful. On error it will return an negative + * error value. + **/ static int lpfc_debugfs_disc_trc_open(struct inode *inode, struct file *file) { @@ -585,7 +713,7 @@ lpfc_debugfs_disc_trc_open(struct inode *inode, struct file *file) if (!debug) goto out; - /* Round to page boundry */ + /* Round to page boundary */ size = (lpfc_debugfs_max_disc_trc * LPFC_DEBUG_TRC_ENTRY_SIZE); size = PAGE_ALIGN(size); @@ -603,6 +731,21 @@ out: return rc; } +/** + * lpfc_debugfs_slow_ring_trc_open - Open the Slow Ring trace log. + * @inode: The inode pointer that contains a vport pointer. + * @file: The file pointer to attach the log output. + * + * Description: + * This routine is the entry point for the debugfs open file operation. It gets + * the vport from the i_private field in @inode, allocates the necessary buffer + * for the log, fills the buffer from the in-memory log for this vport, and then + * returns a pointer to that log in the private_data field in @file. + * + * Returns: + * This function returns zero if successful. On error it will return an negative + * error value. + **/ static int lpfc_debugfs_slow_ring_trc_open(struct inode *inode, struct file *file) { @@ -620,7 +763,7 @@ lpfc_debugfs_slow_ring_trc_open(struct inode *inode, struct file *file) if (!debug) goto out; - /* Round to page boundry */ + /* Round to page boundary */ size = (lpfc_debugfs_max_slow_ring_trc * LPFC_DEBUG_TRC_ENTRY_SIZE); size = PAGE_ALIGN(size); @@ -638,6 +781,21 @@ out: return rc; } +/** + * lpfc_debugfs_hbqinfo_open - Open the hbqinfo debugfs buffer. + * @inode: The inode pointer that contains a vport pointer. + * @file: The file pointer to attach the log output. + * + * Description: + * This routine is the entry point for the debugfs open file operation. It gets + * the vport from the i_private field in @inode, allocates the necessary buffer + * for the log, fills the buffer from the in-memory log for this vport, and then + * returns a pointer to that log in the private_data field in @file. + * + * Returns: + * This function returns zero if successful. On error it will return an negative + * error value. + **/ static int lpfc_debugfs_hbqinfo_open(struct inode *inode, struct file *file) { @@ -649,7 +807,7 @@ lpfc_debugfs_hbqinfo_open(struct inode *inode, struct file *file) if (!debug) goto out; - /* Round to page boundry */ + /* Round to page boundary */ debug->buffer = kmalloc(LPFC_HBQINFO_SIZE, GFP_KERNEL); if (!debug->buffer) { kfree(debug); @@ -665,6 +823,21 @@ out: return rc; } +/** + * lpfc_debugfs_dumpHBASlim_open - Open the Dump HBA SLIM debugfs buffer. + * @inode: The inode pointer that contains a vport pointer. + * @file: The file pointer to attach the log output. + * + * Description: + * This routine is the entry point for the debugfs open file operation. It gets + * the vport from the i_private field in @inode, allocates the necessary buffer + * for the log, fills the buffer from the in-memory log for this vport, and then + * returns a pointer to that log in the private_data field in @file. + * + * Returns: + * This function returns zero if successful. On error it will return an negative + * error value. + **/ static int lpfc_debugfs_dumpHBASlim_open(struct inode *inode, struct file *file) { @@ -676,7 +849,7 @@ lpfc_debugfs_dumpHBASlim_open(struct inode *inode, struct file *file) if (!debug) goto out; - /* Round to page boundry */ + /* Round to page boundary */ debug->buffer = kmalloc(LPFC_DUMPHBASLIM_SIZE, GFP_KERNEL); if (!debug->buffer) { kfree(debug); @@ -692,6 +865,21 @@ out: return rc; } +/** + * lpfc_debugfs_dumpHostSlim_open - Open the Dump Host SLIM debugfs buffer. + * @inode: The inode pointer that contains a vport pointer. + * @file: The file pointer to attach the log output. + * + * Description: + * This routine is the entry point for the debugfs open file operation. It gets + * the vport from the i_private field in @inode, allocates the necessary buffer + * for the log, fills the buffer from the in-memory log for this vport, and then + * returns a pointer to that log in the private_data field in @file. + * + * Returns: + * This function returns zero if successful. On error it will return an negative + * error value. + **/ static int lpfc_debugfs_dumpHostSlim_open(struct inode *inode, struct file *file) { @@ -703,7 +891,7 @@ lpfc_debugfs_dumpHostSlim_open(struct inode *inode, struct file *file) if (!debug) goto out; - /* Round to page boundry */ + /* Round to page boundary */ debug->buffer = kmalloc(LPFC_DUMPHOSTSLIM_SIZE, GFP_KERNEL); if (!debug->buffer) { kfree(debug); @@ -719,6 +907,21 @@ out: return rc; } +/** + * lpfc_debugfs_nodelist_open - Open the nodelist debugfs file. + * @inode: The inode pointer that contains a vport pointer. + * @file: The file pointer to attach the log output. + * + * Description: + * This routine is the entry point for the debugfs open file operation. It gets + * the vport from the i_private field in @inode, allocates the necessary buffer + * for the log, fills the buffer from the in-memory log for this vport, and then + * returns a pointer to that log in the private_data field in @file. + * + * Returns: + * This function returns zero if successful. On error it will return an negative + * error value. + **/ static int lpfc_debugfs_nodelist_open(struct inode *inode, struct file *file) { @@ -730,7 +933,7 @@ lpfc_debugfs_nodelist_open(struct inode *inode, struct file *file) if (!debug) goto out; - /* Round to page boundry */ + /* Round to page boundary */ debug->buffer = kmalloc(LPFC_NODELIST_SIZE, GFP_KERNEL); if (!debug->buffer) { kfree(debug); @@ -746,6 +949,23 @@ out: return rc; } +/** + * lpfc_debugfs_lseek - Seek through a debugfs file. + * @file: The file pointer to seek through. + * @off: The offset to seek to or the amount to seek by. + * @whence: Indicates how to seek. + * + * Description: + * This routine is the entry point for the debugfs lseek file operation. The + * @whence parameter indicates whether @off is the offset to directly seek to, + * or if it is a value to seek forward or reverse by. This function figures out + * what the new offset of the debugfs file will be and assigns that value to the + * f_pos field of @file. + * + * Returns: + * This function returns the new offset if successful and returns a negative + * error if unable to process the seek. + **/ static loff_t lpfc_debugfs_lseek(struct file *file, loff_t off, int whence) { @@ -767,6 +987,22 @@ lpfc_debugfs_lseek(struct file *file, loff_t off, int whence) return (pos < 0 || pos > debug->len) ? -EINVAL : (file->f_pos = pos); } +/** + * lpfc_debugfs_read - Read a debugfs file. + * @file: The file pointer to read from. + * @buf: The buffer to copy the data to. + * @nbytes: The number of bytes to read. + * @ppos: The position in the file to start reading from. + * + * Description: + * This routine reads data from from the buffer indicated in the private_data + * field of @file. It will start reading at @ppos and copy up to @nbytes of + * data to @buf. + * + * Returns: + * This function returns the amount of data that was read (this could be less + * than @nbytes if the end of the file was reached) or a negative error value. + **/ static ssize_t lpfc_debugfs_read(struct file *file, char __user *buf, size_t nbytes, loff_t *ppos) @@ -776,6 +1012,18 @@ lpfc_debugfs_read(struct file *file, char __user *buf, debug->len); } +/** + * lpfc_debugfs_release - Release the buffer used to store debugfs file data. + * @inode: The inode pointer that contains a vport pointer. (unused) + * @file: The file pointer that contains the buffer to release. + * + * Description: + * This routine frees the buffer that was allocated when the debugfs file was + * opened. + * + * Returns: + * This function returns zero. + **/ static int lpfc_debugfs_release(struct inode *inode, struct file *file) { @@ -845,6 +1093,16 @@ static struct dentry *lpfc_debugfs_root = NULL; static atomic_t lpfc_debugfs_hba_count; #endif +/** + * lpfc_debugfs_initialize - Initialize debugfs for a vport. + * @vport: The vport pointer to initialize. + * + * Description: + * When Debugfs is configured this routine sets up the lpfc debugfs file system. + * If not already created, this routine will create the lpfc directory, and + * lpfcX directory (for this HBA), and vportX directory for this vport. It will + * also create each file used to access lpfc specific debugfs information. + **/ inline void lpfc_debugfs_initialize(struct lpfc_vport *vport) { @@ -862,7 +1120,7 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport) atomic_set(&lpfc_debugfs_hba_count, 0); if (!lpfc_debugfs_root) { lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, - "0409 Cannot create debugfs root\n"); + "0408 Cannot create debugfs root\n"); goto debug_failed; } } @@ -876,7 +1134,7 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport) debugfs_create_dir(name, lpfc_debugfs_root); if (!phba->hba_debugfs_root) { lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, - "0409 Cannot create debugfs hba\n"); + "0412 Cannot create debugfs hba\n"); goto debug_failed; } atomic_inc(&lpfc_debugfs_hba_count); @@ -890,7 +1148,7 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport) phba, &lpfc_debugfs_op_hbqinfo); if (!phba->debug_hbqinfo) { lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, - "0409 Cannot create debugfs hbqinfo\n"); + "0411 Cannot create debugfs hbqinfo\n"); goto debug_failed; } @@ -902,7 +1160,7 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport) phba, &lpfc_debugfs_op_dumpHBASlim); if (!phba->debug_dumpHBASlim) { lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, - "0409 Cannot create debugfs dumpHBASlim\n"); + "0413 Cannot create debugfs dumpHBASlim\n"); goto debug_failed; } @@ -914,7 +1172,7 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport) phba, &lpfc_debugfs_op_dumpHostSlim); if (!phba->debug_dumpHostSlim) { lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, - "0409 Cannot create debugfs dumpHostSlim\n"); + "0414 Cannot create debugfs dumpHostSlim\n"); goto debug_failed; } @@ -944,7 +1202,7 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport) phba, &lpfc_debugfs_op_slow_ring_trc); if (!phba->debug_slow_ring_trc) { lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, - "0409 Cannot create debugfs " + "0415 Cannot create debugfs " "slow_ring_trace\n"); goto debug_failed; } @@ -955,7 +1213,7 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport) GFP_KERNEL); if (!phba->slow_ring_trc) { lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, - "0409 Cannot create debugfs " + "0416 Cannot create debugfs " "slow_ring buffer\n"); goto debug_failed; } @@ -972,7 +1230,7 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport) debugfs_create_dir(name, phba->hba_debugfs_root); if (!vport->vport_debugfs_root) { lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, - "0409 Cant create debugfs"); + "0417 Cant create debugfs"); goto debug_failed; } atomic_inc(&phba->debugfs_vport_count); @@ -1001,7 +1259,7 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport) if (!vport->disc_trc) { lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, - "0409 Cannot create debugfs disc trace " + "0418 Cannot create debugfs disc trace " "buffer\n"); goto debug_failed; } @@ -1014,7 +1272,7 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport) vport, &lpfc_debugfs_op_disc_trc); if (!vport->debug_disc_trc) { lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, - "0409 Cannot create debugfs " + "0419 Cannot create debugfs " "discovery_trace\n"); goto debug_failed; } @@ -1033,7 +1291,17 @@ debug_failed: #endif } - +/** + * lpfc_debugfs_terminate - Tear down debugfs infrastructure for this vport. + * @vport: The vport pointer to remove from debugfs. + * + * Description: + * When Debugfs is configured this routine removes debugfs file system elements + * that are specific to this vport. It also checks to see if there are any + * users left for the debugfs directories associated with the HBA and driver. If + * this is the last user of the HBA directory or driver directory then it will + * remove those from the debugfs infrastructure as well. + **/ inline void lpfc_debugfs_terminate(struct lpfc_vport *vport) { @@ -1096,5 +1364,3 @@ lpfc_debugfs_terminate(struct lpfc_vport *vport) #endif return; } - - diff --git a/drivers/scsi/lpfc/lpfc_disc.h b/drivers/scsi/lpfc/lpfc_disc.h index 2db0b74b6fa..f29e548a90d 100644 --- a/drivers/scsi/lpfc/lpfc_disc.h +++ b/drivers/scsi/lpfc/lpfc_disc.h @@ -37,6 +37,7 @@ enum lpfc_work_type { LPFC_EVT_KILL, LPFC_EVT_ELS_RETRY, LPFC_EVT_DEV_LOSS, + LPFC_EVT_FASTPATH_MGMT_EVT, }; /* structure used to queue event to the discovery tasklet */ @@ -47,6 +48,24 @@ struct lpfc_work_evt { enum lpfc_work_type evt; }; +struct lpfc_scsi_check_condition_event; +struct lpfc_scsi_varqueuedepth_event; +struct lpfc_scsi_event_header; +struct lpfc_fabric_event_header; +struct lpfc_fcprdchkerr_event; + +/* structure used for sending events from fast path */ +struct lpfc_fast_path_event { + struct lpfc_work_evt work_evt; + struct lpfc_vport *vport; + union { + struct lpfc_scsi_check_condition_event check_cond_evt; + struct lpfc_scsi_varqueuedepth_event queue_depth_evt; + struct lpfc_scsi_event_header scsi_evt; + struct lpfc_fabric_event_header fabric_evt; + struct lpfc_fcprdchkerr_event read_check_error; + } un; +}; struct lpfc_nodelist { struct list_head nlp_listp; @@ -88,6 +107,10 @@ struct lpfc_nodelist { unsigned long last_ramp_up_time; /* jiffy of last ramp up */ unsigned long last_q_full_time; /* jiffy of last queue full */ struct kref kref; + atomic_t cmd_pending; + uint32_t cmd_qdepth; + unsigned long last_change_time; + struct lpfc_scsicmd_bkt *lat_data; /* Latency data */ }; /* Defines for nlp_flag (uint32) */ diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index f54e0f7eaee..630bd28fb99 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -30,6 +30,7 @@ #include "lpfc_hw.h" #include "lpfc_sli.h" +#include "lpfc_nl.h" #include "lpfc_disc.h" #include "lpfc_scsi.h" #include "lpfc.h" @@ -53,6 +54,28 @@ static void lpfc_register_new_vport(struct lpfc_hba *phba, static int lpfc_max_els_tries = 3; +/** + * lpfc_els_chk_latt: Check host link attention event for a vport. + * @vport: pointer to a host virtual N_Port data structure. + * + * This routine checks whether there is an outstanding host link + * attention event during the discovery process with the @vport. It is done + * by reading the HBA's Host Attention (HA) register. If there is any host + * link attention events during this @vport's discovery process, the @vport + * shall be marked as FC_ABORT_DISCOVERY, a host link attention clear shall + * be issued if the link state is not already in host link cleared state, + * and a return code shall indicate whether the host link attention event + * had happened. + * + * Note that, if either the host link is in state LPFC_LINK_DOWN or @vport + * state in LPFC_VPORT_READY, the request for checking host link attention + * event will be ignored and a return code shall indicate no host link + * attention event had happened. + * + * Return codes + * 0 - no host link attention event happened + * 1 - host link attention event happened + **/ int lpfc_els_chk_latt(struct lpfc_vport *vport) { @@ -92,6 +115,34 @@ lpfc_els_chk_latt(struct lpfc_vport *vport) return 1; } +/** + * lpfc_prep_els_iocb: Allocate and prepare a lpfc iocb data structure. + * @vport: pointer to a host virtual N_Port data structure. + * @expectRsp: flag indicating whether response is expected. + * @cmdSize: size of the ELS command. + * @retry: number of retries to the command IOCB when it fails. + * @ndlp: pointer to a node-list data structure. + * @did: destination identifier. + * @elscmd: the ELS command code. + * + * This routine is used for allocating a lpfc-IOCB data structure from + * the driver lpfc-IOCB free-list and prepare the IOCB with the parameters + * passed into the routine for discovery state machine to issue an Extended + * Link Service (ELS) commands. It is a generic lpfc-IOCB allocation + * and preparation routine that is used by all the discovery state machine + * routines and the ELS command-specific fields will be later set up by + * the individual discovery machine routines after calling this routine + * allocating and preparing a generic IOCB data structure. It fills in the + * Buffer Descriptor Entries (BDEs), allocates buffers for both command + * payload and response payload (if expected). The reference count on the + * ndlp is incremented by 1 and the reference to the ndlp is put into + * context1 of the IOCB data structure for this IOCB to hold the ndlp + * reference for the command's callback function to access later. + * + * Return code + * Pointer to the newly allocated/prepared els iocb data structure + * NULL - when els iocb data structure allocation/preparation failed + **/ static struct lpfc_iocbq * lpfc_prep_els_iocb(struct lpfc_vport *vport, uint8_t expectRsp, uint16_t cmdSize, uint8_t retry, @@ -150,7 +201,7 @@ lpfc_prep_els_iocb(struct lpfc_vport *vport, uint8_t expectRsp, icmd->un.elsreq64.bdl.addrHigh = putPaddrHigh(pbuflist->phys); icmd->un.elsreq64.bdl.addrLow = putPaddrLow(pbuflist->phys); - icmd->un.elsreq64.bdl.bdeFlags = BUFF_TYPE_BDL; + icmd->un.elsreq64.bdl.bdeFlags = BUFF_TYPE_BLP_64; icmd->un.elsreq64.remoteID = did; /* DID */ if (expectRsp) { icmd->un.elsreq64.bdl.bdeSize = (2 * sizeof(struct ulp_bde64)); @@ -185,7 +236,7 @@ lpfc_prep_els_iocb(struct lpfc_vport *vport, uint8_t expectRsp, bpl->addrLow = le32_to_cpu(putPaddrLow(prsp->phys)); bpl->addrHigh = le32_to_cpu(putPaddrHigh(prsp->phys)); bpl->tus.f.bdeSize = FCELSSIZE; - bpl->tus.f.bdeFlags = BUFF_USE_RCV; + bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64; bpl->tus.w = le32_to_cpu(bpl->tus.w); } @@ -233,6 +284,22 @@ els_iocb_free_pcmb_exit: return NULL; } +/** + * lpfc_issue_fabric_reglogin: Issue fabric registration login for a vport. + * @vport: pointer to a host virtual N_Port data structure. + * + * This routine issues a fabric registration login for a @vport. An + * active ndlp node with Fabric_DID must already exist for this @vport. + * The routine invokes two mailbox commands to carry out fabric registration + * login through the HBA firmware: the first mailbox command requests the + * HBA to perform link configuration for the @vport; and the second mailbox + * command requests the HBA to perform the actual fabric registration login + * with the @vport. + * + * Return code + * 0 - successfully issued fabric registration login for @vport + * -ENXIO -- failed to issue fabric registration login for @vport + **/ static int lpfc_issue_fabric_reglogin(struct lpfc_vport *vport) { @@ -313,6 +380,26 @@ fail: return -ENXIO; } +/** + * lpfc_cmpl_els_flogi_fabric: Completion function for flogi to a fabric port. + * @vport: pointer to a host virtual N_Port data structure. + * @ndlp: pointer to a node-list data structure. + * @sp: pointer to service parameter data structure. + * @irsp: pointer to the IOCB within the lpfc response IOCB. + * + * This routine is invoked by the lpfc_cmpl_els_flogi() completion callback + * function to handle the completion of a Fabric Login (FLOGI) into a fabric + * port in a fabric topology. It properly sets up the parameters to the @ndlp + * from the IOCB response. It also check the newly assigned N_Port ID to the + * @vport against the previously assigned N_Port ID. If it is different from + * the previously assigned Destination ID (DID), the lpfc_unreg_rpi() routine + * is invoked on all the remaining nodes with the @vport to unregister the + * Remote Port Indicators (RPIs). Finally, the lpfc_issue_fabric_reglogin() + * is invoked to register login to the fabric. + * + * Return code + * 0 - Success (currently, always return 0) + **/ static int lpfc_cmpl_els_flogi_fabric(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, struct serv_parm *sp, IOCB_t *irsp) @@ -387,7 +474,7 @@ lpfc_cmpl_els_flogi_fabric(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, */ list_for_each_entry_safe(np, next_np, &vport->fc_nodes, nlp_listp) { - if (!NLP_CHK_NODE_ACT(ndlp)) + if (!NLP_CHK_NODE_ACT(np)) continue; if ((np->nlp_state != NLP_STE_NPR_NODE) || !(np->nlp_flag & NLP_NPR_ADISC)) @@ -416,9 +503,26 @@ lpfc_cmpl_els_flogi_fabric(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, return 0; } -/* - * We FLOGIed into an NPort, initiate pt2pt protocol - */ +/** + * lpfc_cmpl_els_flogi_nport: Completion function for flogi to an N_Port. + * @vport: pointer to a host virtual N_Port data structure. + * @ndlp: pointer to a node-list data structure. + * @sp: pointer to service parameter data structure. + * + * This routine is invoked by the lpfc_cmpl_els_flogi() completion callback + * function to handle the completion of a Fabric Login (FLOGI) into an N_Port + * in a point-to-point topology. First, the @vport's N_Port Name is compared + * with the received N_Port Name: if the @vport's N_Port Name is greater than + * the received N_Port Name lexicographically, this node shall assign local + * N_Port ID (PT2PT_LocalID: 1) and remote N_Port ID (PT2PT_RemoteID: 2) and + * will send out Port Login (PLOGI) with the N_Port IDs assigned. Otherwise, + * this node shall just wait for the remote node to issue PLOGI and assign + * N_Port IDs. + * + * Return code + * 0 - Success + * -ENXIO - Fail + **/ static int lpfc_cmpl_els_flogi_nport(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, struct serv_parm *sp) @@ -516,6 +620,29 @@ fail: return -ENXIO; } +/** + * lpfc_cmpl_els_flogi: Completion callback function for flogi. + * @phba: pointer to lpfc hba data structure. + * @cmdiocb: pointer to lpfc command iocb data structure. + * @rspiocb: pointer to lpfc response iocb data structure. + * + * This routine is the top-level completion callback function for issuing + * a Fabric Login (FLOGI) command. If the response IOCB reported error, + * the lpfc_els_retry() routine shall be invoked to retry the FLOGI. If + * retry has been made (either immediately or delayed with lpfc_els_retry() + * returning 1), the command IOCB will be released and function returned. + * If the retry attempt has been given up (possibly reach the maximum + * number of retries), one additional decrement of ndlp reference shall be + * invoked before going out after releasing the command IOCB. This will + * actually release the remote node (Note, lpfc_els_free_iocb() will also + * invoke one decrement of ndlp reference count). If no error reported in + * the IOCB status, the command Port ID field is used to determine whether + * this is a point-to-point topology or a fabric topology: if the Port ID + * field is assigned, it is a fabric topology; otherwise, it is a + * point-to-point topology. The routine lpfc_cmpl_els_flogi_fabric() or + * lpfc_cmpl_els_flogi_nport() shall be invoked accordingly to handle the + * specific topology completion conditions. + **/ static void lpfc_cmpl_els_flogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, struct lpfc_iocbq *rspiocb) @@ -618,6 +745,28 @@ out: lpfc_els_free_iocb(phba, cmdiocb); } +/** + * lpfc_issue_els_flogi: Issue an flogi iocb command for a vport. + * @vport: pointer to a host virtual N_Port data structure. + * @ndlp: pointer to a node-list data structure. + * @retry: number of retries to the command IOCB. + * + * This routine issues a Fabric Login (FLOGI) Request ELS command + * for a @vport. The initiator service parameters are put into the payload + * of the FLOGI Request IOCB and the top-level callback function pointer + * to lpfc_cmpl_els_flogi() routine is put to the IOCB completion callback + * function field. The lpfc_issue_fabric_iocb routine is invoked to send + * out FLOGI ELS command with one outstanding fabric IOCB at a time. + * + * Note that, in lpfc_prep_els_iocb() routine, the reference count of ndlp + * will be incremented by 1 for holding the ndlp and the reference to ndlp + * will be stored into the context1 field of the IOCB for the completion + * callback function to the FLOGI ELS command. + * + * Return code + * 0 - successfully issued flogi iocb for @vport + * 1 - failed to issue flogi iocb for @vport + **/ static int lpfc_issue_els_flogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, uint8_t retry) @@ -694,6 +843,20 @@ lpfc_issue_els_flogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, return 0; } +/** + * lpfc_els_abort_flogi: Abort all outstanding flogi iocbs. + * @phba: pointer to lpfc hba data structure. + * + * This routine aborts all the outstanding Fabric Login (FLOGI) IOCBs + * with a @phba. This routine walks all the outstanding IOCBs on the txcmplq + * list and issues an abort IOCB commond on each outstanding IOCB that + * contains a active Fabric_DID ndlp. Note that this function is to issue + * the abort IOCB command on all the outstanding IOCBs, thus when this + * function returns, it does not guarantee all the IOCBs are actually aborted. + * + * Return code + * 0 - Sucessfully issued abort iocb on all outstanding flogis (Always 0) + **/ int lpfc_els_abort_flogi(struct lpfc_hba *phba) { @@ -729,6 +892,22 @@ lpfc_els_abort_flogi(struct lpfc_hba *phba) return 0; } +/** + * lpfc_initial_flogi: Issue an initial fabric login for a vport. + * @vport: pointer to a host virtual N_Port data structure. + * + * This routine issues an initial Fabric Login (FLOGI) for the @vport + * specified. It first searches the ndlp with the Fabric_DID (0xfffffe) from + * the @vport's ndlp list. If no such ndlp found, it will create an ndlp and + * put it into the @vport's ndlp list. If an inactive ndlp found on the list, + * it will just be enabled and made active. The lpfc_issue_els_flogi() routine + * is then invoked with the @vport and the ndlp to perform the FLOGI for the + * @vport. + * + * Return code + * 0 - failed to issue initial flogi for @vport + * 1 - successfully issued initial flogi for @vport + **/ int lpfc_initial_flogi(struct lpfc_vport *vport) { @@ -764,6 +943,22 @@ lpfc_initial_flogi(struct lpfc_vport *vport) return 1; } +/** + * lpfc_initial_fdisc: Issue an initial fabric discovery for a vport. + * @vport: pointer to a host virtual N_Port data structure. + * + * This routine issues an initial Fabric Discover (FDISC) for the @vport + * specified. It first searches the ndlp with the Fabric_DID (0xfffffe) from + * the @vport's ndlp list. If no such ndlp found, it will create an ndlp and + * put it into the @vport's ndlp list. If an inactive ndlp found on the list, + * it will just be enabled and made active. The lpfc_issue_els_fdisc() routine + * is then invoked with the @vport and the ndlp to perform the FDISC for the + * @vport. + * + * Return code + * 0 - failed to issue initial fdisc for @vport + * 1 - successfully issued initial fdisc for @vport + **/ int lpfc_initial_fdisc(struct lpfc_vport *vport) { @@ -797,6 +992,17 @@ lpfc_initial_fdisc(struct lpfc_vport *vport) return 1; } +/** + * lpfc_more_plogi: Check and issue remaining plogis for a vport. + * @vport: pointer to a host virtual N_Port data structure. + * + * This routine checks whether there are more remaining Port Logins + * (PLOGI) to be issued for the @vport. If so, it will invoke the routine + * lpfc_els_disc_plogi() to go through the Node Port Recovery (NPR) nodes + * to issue ELS PLOGIs up to the configured discover threads with the + * @vport (@vport->cfg_discovery_threads). The function also decrement + * the @vport's num_disc_node by 1 if it is not already 0. + **/ void lpfc_more_plogi(struct lpfc_vport *vport) { @@ -819,6 +1025,37 @@ lpfc_more_plogi(struct lpfc_vport *vport) return; } +/** + * lpfc_plogi_confirm_nport: Confirm pologi wwpn matches stored ndlp. + * @phba: pointer to lpfc hba data structure. + * @prsp: pointer to response IOCB payload. + * @ndlp: pointer to a node-list data structure. + * + * This routine checks and indicates whether the WWPN of an N_Port, retrieved + * from a PLOGI, matches the WWPN that is stored in the @ndlp for that N_POrt. + * The following cases are considered N_Port confirmed: + * 1) The N_Port is a Fabric ndlp; 2) The @ndlp is on vport list and matches + * the WWPN of the N_Port logged into; 3) The @ndlp is not on vport list but + * it does not have WWPN assigned either. If the WWPN is confirmed, the + * pointer to the @ndlp will be returned. If the WWPN is not confirmed: + * 1) if there is a node on vport list other than the @ndlp with the same + * WWPN of the N_Port PLOGI logged into, the lpfc_unreg_rpi() will be invoked + * on that node to release the RPI associated with the node; 2) if there is + * no node found on vport list with the same WWPN of the N_Port PLOGI logged + * into, a new node shall be allocated (or activated). In either case, the + * parameters of the @ndlp shall be copied to the new_ndlp, the @ndlp shall + * be released and the new_ndlp shall be put on to the vport node list and + * its pointer returned as the confirmed node. + * + * Note that before the @ndlp got "released", the keepDID from not-matching + * or inactive "new_ndlp" on the vport node list is assigned to the nlp_DID + * of the @ndlp. This is because the release of @ndlp is actually to put it + * into an inactive state on the vport node list and the vport node list + * management algorithm does not allow two node with a same DID. + * + * Return code + * pointer to the PLOGI N_Port @ndlp + **/ static struct lpfc_nodelist * lpfc_plogi_confirm_nport(struct lpfc_hba *phba, uint32_t *prsp, struct lpfc_nodelist *ndlp) @@ -922,6 +1159,17 @@ lpfc_plogi_confirm_nport(struct lpfc_hba *phba, uint32_t *prsp, return new_ndlp; } +/** + * lpfc_end_rscn: Check and handle more rscn for a vport. + * @vport: pointer to a host virtual N_Port data structure. + * + * This routine checks whether more Registration State Change + * Notifications (RSCNs) came in while the discovery state machine was in + * the FC_RSCN_MODE. If so, the lpfc_els_handle_rscn() routine will be + * invoked to handle the additional RSCNs for the @vport. Otherwise, the + * FC_RSCN_MODE bit will be cleared with the @vport to mark as the end of + * handling the RSCNs. + **/ void lpfc_end_rscn(struct lpfc_vport *vport) { @@ -943,6 +1191,26 @@ lpfc_end_rscn(struct lpfc_vport *vport) } } +/** + * lpfc_cmpl_els_plogi: Completion callback function for plogi. + * @phba: pointer to lpfc hba data structure. + * @cmdiocb: pointer to lpfc command iocb data structure. + * @rspiocb: pointer to lpfc response iocb data structure. + * + * This routine is the completion callback function for issuing the Port + * Login (PLOGI) command. For PLOGI completion, there must be an active + * ndlp on the vport node list that matches the remote node ID from the + * PLOGI reponse IOCB. If such ndlp does not exist, the PLOGI is simply + * ignored and command IOCB released. The PLOGI response IOCB status is + * checked for error conditons. If there is error status reported, PLOGI + * retry shall be attempted by invoking the lpfc_els_retry() routine. + * Otherwise, the lpfc_plogi_confirm_nport() routine shall be invoked on + * the ndlp and the NLP_EVT_CMPL_PLOGI state to the Discover State Machine + * (DSM) is set for this PLOGI completion. Finally, it checks whether + * there are additional N_Port nodes with the vport that need to perform + * PLOGI. If so, the lpfc_more_plogi() routine is invoked to issue addition + * PLOGIs. + **/ static void lpfc_cmpl_els_plogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, struct lpfc_iocbq *rspiocb) @@ -1048,6 +1316,27 @@ out: return; } +/** + * lpfc_issue_els_plogi: Issue an plogi iocb command for a vport. + * @vport: pointer to a host virtual N_Port data structure. + * @did: destination port identifier. + * @retry: number of retries to the command IOCB. + * + * This routine issues a Port Login (PLOGI) command to a remote N_Port + * (with the @did) for a @vport. Before issuing a PLOGI to a remote N_Port, + * the ndlp with the remote N_Port DID must exist on the @vport's ndlp list. + * This routine constructs the proper feilds of the PLOGI IOCB and invokes + * the lpfc_sli_issue_iocb() routine to send out PLOGI ELS command. + * + * Note that, in lpfc_prep_els_iocb() routine, the reference count of ndlp + * will be incremented by 1 for holding the ndlp and the reference to ndlp + * will be stored into the context1 field of the IOCB for the completion + * callback function to the PLOGI ELS command. + * + * Return code + * 0 - Successfully issued a plogi for @vport + * 1 - failed to issue a plogi for @vport + **/ int lpfc_issue_els_plogi(struct lpfc_vport *vport, uint32_t did, uint8_t retry) { @@ -1106,6 +1395,19 @@ lpfc_issue_els_plogi(struct lpfc_vport *vport, uint32_t did, uint8_t retry) return 0; } +/** + * lpfc_cmpl_els_prli: Completion callback function for prli. + * @phba: pointer to lpfc hba data structure. + * @cmdiocb: pointer to lpfc command iocb data structure. + * @rspiocb: pointer to lpfc response iocb data structure. + * + * This routine is the completion callback function for a Process Login + * (PRLI) ELS command. The PRLI response IOCB status is checked for error + * status. If there is error status reported, PRLI retry shall be attempted + * by invoking the lpfc_els_retry() routine. Otherwise, the state + * NLP_EVT_CMPL_PRLI is sent to the Discover State Machine (DSM) for this + * ndlp to mark the PRLI completion. + **/ static void lpfc_cmpl_els_prli(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, struct lpfc_iocbq *rspiocb) @@ -1164,6 +1466,27 @@ out: return; } +/** + * lpfc_issue_els_prli: Issue a prli iocb command for a vport. + * @vport: pointer to a host virtual N_Port data structure. + * @ndlp: pointer to a node-list data structure. + * @retry: number of retries to the command IOCB. + * + * This routine issues a Process Login (PRLI) ELS command for the + * @vport. The PRLI service parameters are set up in the payload of the + * PRLI Request command and the pointer to lpfc_cmpl_els_prli() routine + * is put to the IOCB completion callback func field before invoking the + * routine lpfc_sli_issue_iocb() to send out PRLI command. + * + * Note that, in lpfc_prep_els_iocb() routine, the reference count of ndlp + * will be incremented by 1 for holding the ndlp and the reference to ndlp + * will be stored into the context1 field of the IOCB for the completion + * callback function to the PRLI ELS command. + * + * Return code + * 0 - successfully issued prli iocb command for @vport + * 1 - failed to issue prli iocb command for @vport + **/ int lpfc_issue_els_prli(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, uint8_t retry) @@ -1233,6 +1556,92 @@ lpfc_issue_els_prli(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, return 0; } +/** + * lpfc_rscn_disc: Perform rscn discovery for a vport. + * @vport: pointer to a host virtual N_Port data structure. + * + * This routine performs Registration State Change Notification (RSCN) + * discovery for a @vport. If the @vport's node port recovery count is not + * zero, it will invoke the lpfc_els_disc_plogi() to perform PLOGI for all + * the nodes that need recovery. If none of the PLOGI were needed through + * the lpfc_els_disc_plogi() routine, the lpfc_end_rscn() routine shall be + * invoked to check and handle possible more RSCN came in during the period + * of processing the current ones. + **/ +static void +lpfc_rscn_disc(struct lpfc_vport *vport) +{ + lpfc_can_disctmo(vport); + + /* RSCN discovery */ + /* go thru NPR nodes and issue ELS PLOGIs */ + if (vport->fc_npr_cnt) + if (lpfc_els_disc_plogi(vport)) + return; + + lpfc_end_rscn(vport); +} + +/** + * lpfc_adisc_done: Complete the adisc phase of discovery. + * @vport: pointer to lpfc_vport hba data structure that finished all ADISCs. + * + * This function is called when the final ADISC is completed during discovery. + * This function handles clearing link attention or issuing reg_vpi depending + * on whether npiv is enabled. This function also kicks off the PLOGI phase of + * discovery. + * This function is called with no locks held. + **/ +static void +lpfc_adisc_done(struct lpfc_vport *vport) +{ + struct Scsi_Host *shost = lpfc_shost_from_vport(vport); + struct lpfc_hba *phba = vport->phba; + + /* + * For NPIV, cmpl_reg_vpi will set port_state to READY, + * and continue discovery. + */ + if ((phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) && + !(vport->fc_flag & FC_RSCN_MODE)) { + lpfc_issue_reg_vpi(phba, vport); + return; + } + /* + * For SLI2, we need to set port_state to READY + * and continue discovery. + */ + if (vport->port_state < LPFC_VPORT_READY) { + /* If we get here, there is nothing to ADISC */ + if (vport->port_type == LPFC_PHYSICAL_PORT) + lpfc_issue_clear_la(phba, vport); + if (!(vport->fc_flag & FC_ABORT_DISCOVERY)) { + vport->num_disc_nodes = 0; + /* go thru NPR list, issue ELS PLOGIs */ + if (vport->fc_npr_cnt) + lpfc_els_disc_plogi(vport); + if (!vport->num_disc_nodes) { + spin_lock_irq(shost->host_lock); + vport->fc_flag &= ~FC_NDISC_ACTIVE; + spin_unlock_irq(shost->host_lock); + lpfc_can_disctmo(vport); + lpfc_end_rscn(vport); + } + } + vport->port_state = LPFC_VPORT_READY; + } else + lpfc_rscn_disc(vport); +} + +/** + * lpfc_more_adisc: Issue more adisc as needed. + * @vport: pointer to a host virtual N_Port data structure. + * + * This routine determines whether there are more ndlps on a @vport + * node list need to have Address Discover (ADISC) issued. If so, it will + * invoke the lpfc_els_disc_adisc() routine to issue ADISC on the @vport's + * remaining nodes which need to have ADISC sent. + **/ void lpfc_more_adisc(struct lpfc_vport *vport) { @@ -1252,23 +1661,27 @@ lpfc_more_adisc(struct lpfc_vport *vport) /* go thru NPR nodes and issue any remaining ELS ADISCs */ sentadisc = lpfc_els_disc_adisc(vport); } + if (!vport->num_disc_nodes) + lpfc_adisc_done(vport); return; } -static void -lpfc_rscn_disc(struct lpfc_vport *vport) -{ - lpfc_can_disctmo(vport); - - /* RSCN discovery */ - /* go thru NPR nodes and issue ELS PLOGIs */ - if (vport->fc_npr_cnt) - if (lpfc_els_disc_plogi(vport)) - return; - - lpfc_end_rscn(vport); -} - +/** + * lpfc_cmpl_els_adisc: Completion callback function for adisc. + * @phba: pointer to lpfc hba data structure. + * @cmdiocb: pointer to lpfc command iocb data structure. + * @rspiocb: pointer to lpfc response iocb data structure. + * + * This routine is the completion function for issuing the Address Discover + * (ADISC) command. It first checks to see whether link went down during + * the discovery process. If so, the node will be marked as node port + * recovery for issuing discover IOCB by the link attention handler and + * exit. Otherwise, the response status is checked. If error was reported + * in the response status, the ADISC command shall be retried by invoking + * the lpfc_els_retry() routine. Otherwise, if no error was reported in + * the response status, the state machine is invoked to set transition + * with respect to NLP_EVT_CMPL_ADISC event. + **/ static void lpfc_cmpl_els_adisc(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, struct lpfc_iocbq *rspiocb) @@ -1333,57 +1746,34 @@ lpfc_cmpl_els_adisc(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, lpfc_disc_state_machine(vport, ndlp, cmdiocb, NLP_EVT_CMPL_ADISC); - if (disc && vport->num_disc_nodes) { - /* Check to see if there are more ADISCs to be sent */ + /* Check to see if there are more ADISCs to be sent */ + if (disc && vport->num_disc_nodes) lpfc_more_adisc(vport); - - /* Check to see if we are done with ADISC authentication */ - if (vport->num_disc_nodes == 0) { - /* If we get here, there is nothing left to ADISC */ - /* - * For NPIV, cmpl_reg_vpi will set port_state to READY, - * and continue discovery. - */ - if ((phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) && - !(vport->fc_flag & FC_RSCN_MODE)) { - lpfc_issue_reg_vpi(phba, vport); - goto out; - } - /* - * For SLI2, we need to set port_state to READY - * and continue discovery. - */ - if (vport->port_state < LPFC_VPORT_READY) { - /* If we get here, there is nothing to ADISC */ - if (vport->port_type == LPFC_PHYSICAL_PORT) - lpfc_issue_clear_la(phba, vport); - - if (!(vport->fc_flag & FC_ABORT_DISCOVERY)) { - vport->num_disc_nodes = 0; - /* go thru NPR list, issue ELS PLOGIs */ - if (vport->fc_npr_cnt) - lpfc_els_disc_plogi(vport); - - if (!vport->num_disc_nodes) { - spin_lock_irq(shost->host_lock); - vport->fc_flag &= - ~FC_NDISC_ACTIVE; - spin_unlock_irq( - shost->host_lock); - lpfc_can_disctmo(vport); - } - } - vport->port_state = LPFC_VPORT_READY; - } else { - lpfc_rscn_disc(vport); - } - } - } out: lpfc_els_free_iocb(phba, cmdiocb); return; } +/** + * lpfc_issue_els_adisc: Issue an address discover iocb to an node on a vport. + * @vport: pointer to a virtual N_Port data structure. + * @ndlp: pointer to a node-list data structure. + * @retry: number of retries to the command IOCB. + * + * This routine issues an Address Discover (ADISC) for an @ndlp on a + * @vport. It prepares the payload of the ADISC ELS command, updates the + * and states of the ndlp, and invokes the lpfc_sli_issue_iocb() routine + * to issue the ADISC ELS command. + * + * Note that, in lpfc_prep_els_iocb() routine, the reference count of ndlp + * will be incremented by 1 for holding the ndlp and the reference to ndlp + * will be stored into the context1 field of the IOCB for the completion + * callback function to the ADISC ELS command. + * + * Return code + * 0 - successfully issued adisc + * 1 - failed to issue adisc + **/ int lpfc_issue_els_adisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, uint8_t retry) @@ -1437,6 +1827,18 @@ lpfc_issue_els_adisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, return 0; } +/** + * lpfc_cmpl_els_logo: Completion callback function for logo. + * @phba: pointer to lpfc hba data structure. + * @cmdiocb: pointer to lpfc command iocb data structure. + * @rspiocb: pointer to lpfc response iocb data structure. + * + * This routine is the completion function for issuing the ELS Logout (LOGO) + * command. If no error status was reported from the LOGO response, the + * state machine of the associated ndlp shall be invoked for transition with + * respect to NLP_EVT_CMPL_LOGO event. Otherwise, if error status was reported, + * the lpfc_els_retry() routine will be invoked to retry the LOGO command. + **/ static void lpfc_cmpl_els_logo(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, struct lpfc_iocbq *rspiocb) @@ -1502,6 +1904,26 @@ out: return; } +/** + * lpfc_issue_els_logo: Issue a logo to an node on a vport. + * @vport: pointer to a virtual N_Port data structure. + * @ndlp: pointer to a node-list data structure. + * @retry: number of retries to the command IOCB. + * + * This routine constructs and issues an ELS Logout (LOGO) iocb command + * to a remote node, referred by an @ndlp on a @vport. It constructs the + * payload of the IOCB, properly sets up the @ndlp state, and invokes the + * lpfc_sli_issue_iocb() routine to send out the LOGO ELS command. + * + * Note that, in lpfc_prep_els_iocb() routine, the reference count of ndlp + * will be incremented by 1 for holding the ndlp and the reference to ndlp + * will be stored into the context1 field of the IOCB for the completion + * callback function to the LOGO ELS command. + * + * Return code + * 0 - successfully issued logo + * 1 - failed to issue logo + **/ int lpfc_issue_els_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, uint8_t retry) @@ -1563,6 +1985,22 @@ lpfc_issue_els_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, return 0; } +/** + * lpfc_cmpl_els_cmd: Completion callback function for generic els command. + * @phba: pointer to lpfc hba data structure. + * @cmdiocb: pointer to lpfc command iocb data structure. + * @rspiocb: pointer to lpfc response iocb data structure. + * + * This routine is a generic completion callback function for ELS commands. + * Specifically, it is the callback function which does not need to perform + * any command specific operations. It is currently used by the ELS command + * issuing routines for the ELS State Change Request (SCR), + * lpfc_issue_els_scr(), and the ELS Fibre Channel Address Resolution + * Protocol Response (FARPR) routine, lpfc_issue_els_farpr(). Other than + * certain debug loggings, this callback function simply invokes the + * lpfc_els_chk_latt() routine to check whether link went down during the + * discovery process. + **/ static void lpfc_cmpl_els_cmd(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, struct lpfc_iocbq *rspiocb) @@ -1587,6 +2025,28 @@ lpfc_cmpl_els_cmd(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, return; } +/** + * lpfc_issue_els_scr: Issue a scr to an node on a vport. + * @vport: pointer to a host virtual N_Port data structure. + * @nportid: N_Port identifier to the remote node. + * @retry: number of retries to the command IOCB. + * + * This routine issues a State Change Request (SCR) to a fabric node + * on a @vport. The remote node @nportid is passed into the function. It + * first search the @vport node list to find the matching ndlp. If no such + * ndlp is found, a new ndlp shall be created for this (SCR) purpose. An + * IOCB is allocated, payload prepared, and the lpfc_sli_issue_iocb() + * routine is invoked to send the SCR IOCB. + * + * Note that, in lpfc_prep_els_iocb() routine, the reference count of ndlp + * will be incremented by 1 for holding the ndlp and the reference to ndlp + * will be stored into the context1 field of the IOCB for the completion + * callback function to the SCR ELS command. + * + * Return code + * 0 - Successfully issued scr command + * 1 - Failed to issue scr command + **/ int lpfc_issue_els_scr(struct lpfc_vport *vport, uint32_t nportid, uint8_t retry) { @@ -1659,6 +2119,28 @@ lpfc_issue_els_scr(struct lpfc_vport *vport, uint32_t nportid, uint8_t retry) return 0; } +/** + * lpfc_issue_els_farpr: Issue a farp to an node on a vport. + * @vport: pointer to a host virtual N_Port data structure. + * @nportid: N_Port identifier to the remote node. + * @retry: number of retries to the command IOCB. + * + * This routine issues a Fibre Channel Address Resolution Response + * (FARPR) to a node on a vport. The remote node N_Port identifier (@nportid) + * is passed into the function. It first search the @vport node list to find + * the matching ndlp. If no such ndlp is found, a new ndlp shall be created + * for this (FARPR) purpose. An IOCB is allocated, payload prepared, and the + * lpfc_sli_issue_iocb() routine is invoked to send the FARPR ELS command. + * + * Note that, in lpfc_prep_els_iocb() routine, the reference count of ndlp + * will be incremented by 1 for holding the ndlp and the reference to ndlp + * will be stored into the context1 field of the IOCB for the completion + * callback function to the PARPR ELS command. + * + * Return code + * 0 - Successfully issued farpr command + * 1 - Failed to issue farpr command + **/ static int lpfc_issue_els_farpr(struct lpfc_vport *vport, uint32_t nportid, uint8_t retry) { @@ -1748,6 +2230,18 @@ lpfc_issue_els_farpr(struct lpfc_vport *vport, uint32_t nportid, uint8_t retry) return 0; } +/** + * lpfc_cancel_retry_delay_tmo: Cancel the timer with delayed iocb-cmd retry. + * @vport: pointer to a host virtual N_Port data structure. + * @nlp: pointer to a node-list data structure. + * + * This routine cancels the timer with a delayed IOCB-command retry for + * a @vport's @ndlp. It stops the timer for the delayed function retrial and + * removes the ELS retry event if it presents. In addition, if the + * NLP_NPR_2B_DISC bit is set in the @nlp's nlp_flag bitmap, ADISC IOCB + * commands are sent for the @vport's nodes that require issuing discovery + * ADISC. + **/ void lpfc_cancel_retry_delay_tmo(struct lpfc_vport *vport, struct lpfc_nodelist *nlp) { @@ -1775,25 +2269,36 @@ lpfc_cancel_retry_delay_tmo(struct lpfc_vport *vport, struct lpfc_nodelist *nlp) if (vport->port_state < LPFC_VPORT_READY) { /* Check if there are more ADISCs to be sent */ lpfc_more_adisc(vport); - if ((vport->num_disc_nodes == 0) && - (vport->fc_npr_cnt)) - lpfc_els_disc_plogi(vport); } else { /* Check if there are more PLOGIs to be sent */ lpfc_more_plogi(vport); - } - if (vport->num_disc_nodes == 0) { - spin_lock_irq(shost->host_lock); - vport->fc_flag &= ~FC_NDISC_ACTIVE; - spin_unlock_irq(shost->host_lock); - lpfc_can_disctmo(vport); - lpfc_end_rscn(vport); + if (vport->num_disc_nodes == 0) { + spin_lock_irq(shost->host_lock); + vport->fc_flag &= ~FC_NDISC_ACTIVE; + spin_unlock_irq(shost->host_lock); + lpfc_can_disctmo(vport); + lpfc_end_rscn(vport); + } } } } return; } +/** + * lpfc_els_retry_delay: Timer function with a ndlp delayed function timer. + * @ptr: holder for the pointer to the timer function associated data (ndlp). + * + * This routine is invoked by the ndlp delayed-function timer to check + * whether there is any pending ELS retry event(s) with the node. If not, it + * simply returns. Otherwise, if there is at least one ELS delayed event, it + * adds the delayed events to the HBA work list and invokes the + * lpfc_worker_wake_up() routine to wake up worker thread to process the + * event. Note that lpfc_nlp_get() is called before posting the event to + * the work list to hold reference count of ndlp so that it guarantees the + * reference to ndlp will still be available when the worker thread gets + * to the event associated with the ndlp. + **/ void lpfc_els_retry_delay(unsigned long ptr) { @@ -1822,6 +2327,15 @@ lpfc_els_retry_delay(unsigned long ptr) return; } +/** + * lpfc_els_retry_delay_handler: Work thread handler for ndlp delayed function. + * @ndlp: pointer to a node-list data structure. + * + * This routine is the worker-thread handler for processing the @ndlp delayed + * event(s), posted by the lpfc_els_retry_delay() routine. It simply retrieves + * the last ELS command from the associated ndlp and invokes the proper ELS + * function according to the delayed ELS command to retry the command. + **/ void lpfc_els_retry_delay_handler(struct lpfc_nodelist *ndlp) { @@ -1884,6 +2398,27 @@ lpfc_els_retry_delay_handler(struct lpfc_nodelist *ndlp) return; } +/** + * lpfc_els_retry: Make retry decision on an els command iocb. + * @phba: pointer to lpfc hba data structure. + * @cmdiocb: pointer to lpfc command iocb data structure. + * @rspiocb: pointer to lpfc response iocb data structure. + * + * This routine makes a retry decision on an ELS command IOCB, which has + * failed. The following ELS IOCBs use this function for retrying the command + * when previously issued command responsed with error status: FLOGI, PLOGI, + * PRLI, ADISC, LOGO, and FDISC. Based on the ELS command type and the + * returned error status, it makes the decision whether a retry shall be + * issued for the command, and whether a retry shall be made immediately or + * delayed. In the former case, the corresponding ELS command issuing-function + * is called to retry the command. In the later case, the ELS command shall + * be posted to the ndlp delayed event and delayed function timer set to the + * ndlp for the delayed command issusing. + * + * Return code + * 0 - No retry of els command is made + * 1 - Immediate or delayed retry of els command is made + **/ static int lpfc_els_retry(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, struct lpfc_iocbq *rspiocb) @@ -2051,7 +2586,7 @@ lpfc_els_retry(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, (stat.un.b.lsRjtRsnCodeExp == LSEXP_INVALID_NPORT_ID)) ) { lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS, - "0123 FDISC Failed (x%x). " + "0122 FDISC Failed (x%x). " "Fabric Detected Bad WWN\n", stat.un.lsRjtError); lpfc_vport_set_state(vport, @@ -2182,12 +2717,26 @@ lpfc_els_retry(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, return 0; } +/** + * lpfc_els_free_data: Free lpfc dma buffer and data structure with an iocb. + * @phba: pointer to lpfc hba data structure. + * @buf_ptr1: pointer to the lpfc DMA buffer data structure. + * + * This routine releases the lpfc DMA (Direct Memory Access) buffer(s) + * associated with a command IOCB back to the lpfc DMA buffer pool. It first + * checks to see whether there is a lpfc DMA buffer associated with the + * response of the command IOCB. If so, it will be released before releasing + * the lpfc DMA buffer associated with the IOCB itself. + * + * Return code + * 0 - Successfully released lpfc DMA buffer (currently, always return 0) + **/ static int lpfc_els_free_data(struct lpfc_hba *phba, struct lpfc_dmabuf *buf_ptr1) { struct lpfc_dmabuf *buf_ptr; - /* Free the response before processing the command. */ + /* Free the response before processing the command. */ if (!list_empty(&buf_ptr1->list)) { list_remove_head(&buf_ptr1->list, buf_ptr, struct lpfc_dmabuf, @@ -2200,6 +2749,18 @@ lpfc_els_free_data(struct lpfc_hba *phba, struct lpfc_dmabuf *buf_ptr1) return 0; } +/** + * lpfc_els_free_bpl: Free lpfc dma buffer and data structure with bpl. + * @phba: pointer to lpfc hba data structure. + * @buf_ptr: pointer to the lpfc dma buffer data structure. + * + * This routine releases the lpfc Direct Memory Access (DMA) buffer + * associated with a Buffer Pointer List (BPL) back to the lpfc DMA buffer + * pool. + * + * Return code + * 0 - Successfully released lpfc DMA buffer (currently, always return 0) + **/ static int lpfc_els_free_bpl(struct lpfc_hba *phba, struct lpfc_dmabuf *buf_ptr) { @@ -2208,6 +2769,33 @@ lpfc_els_free_bpl(struct lpfc_hba *phba, struct lpfc_dmabuf *buf_ptr) return 0; } +/** + * lpfc_els_free_iocb: Free a command iocb and its associated resources. + * @phba: pointer to lpfc hba data structure. + * @elsiocb: pointer to lpfc els command iocb data structure. + * + * This routine frees a command IOCB and its associated resources. The + * command IOCB data structure contains the reference to various associated + * resources, these fields must be set to NULL if the associated reference + * not present: + * context1 - reference to ndlp + * context2 - reference to cmd + * context2->next - reference to rsp + * context3 - reference to bpl + * + * It first properly decrements the reference count held on ndlp for the + * IOCB completion callback function. If LPFC_DELAY_MEM_FREE flag is not + * set, it invokes the lpfc_els_free_data() routine to release the Direct + * Memory Access (DMA) buffers associated with the IOCB. Otherwise, it + * adds the DMA buffer the @phba data structure for the delayed release. + * If reference to the Buffer Pointer List (BPL) is present, the + * lpfc_els_free_bpl() routine is invoked to release the DMA memory + * associated with BPL. Finally, the lpfc_sli_release_iocbq() routine is + * invoked to release the IOCB data structure back to @phba IOCBQ list. + * + * Return code + * 0 - Success (currently, always return 0) + **/ int lpfc_els_free_iocb(struct lpfc_hba *phba, struct lpfc_iocbq *elsiocb) { @@ -2274,6 +2862,23 @@ lpfc_els_free_iocb(struct lpfc_hba *phba, struct lpfc_iocbq *elsiocb) return 0; } +/** + * lpfc_cmpl_els_logo_acc: Completion callback function to logo acc response. + * @phba: pointer to lpfc hba data structure. + * @cmdiocb: pointer to lpfc command iocb data structure. + * @rspiocb: pointer to lpfc response iocb data structure. + * + * This routine is the completion callback function to the Logout (LOGO) + * Accept (ACC) Response ELS command. This routine is invoked to indicate + * the completion of the LOGO process. It invokes the lpfc_nlp_not_used() to + * release the ndlp if it has the last reference remaining (reference count + * is 1). If succeeded (meaning ndlp released), it sets the IOCB context1 + * field to NULL to inform the following lpfc_els_free_iocb() routine no + * ndlp reference count needs to be decremented. Otherwise, the ndlp + * reference use-count shall be decremented by the lpfc_els_free_iocb() + * routine. Finally, the lpfc_els_free_iocb() is invoked to release the + * IOCB data structure. + **/ static void lpfc_cmpl_els_logo_acc(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, struct lpfc_iocbq *rspiocb) @@ -2311,6 +2916,19 @@ lpfc_cmpl_els_logo_acc(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, return; } +/** + * lpfc_mbx_cmpl_dflt_rpi: Completion callbk func for unreg dflt rpi mbox cmd. + * @phba: pointer to lpfc hba data structure. + * @pmb: pointer to the driver internal queue element for mailbox command. + * + * This routine is the completion callback function for unregister default + * RPI (Remote Port Index) mailbox command to the @phba. It simply releases + * the associated lpfc Direct Memory Access (DMA) buffer back to the pool and + * decrements the ndlp reference count held for this completion callback + * function. After that, it invokes the lpfc_nlp_not_used() to check + * whether there is only one reference left on the ndlp. If so, it will + * perform one more decrement and trigger the release of the ndlp. + **/ void lpfc_mbx_cmpl_dflt_rpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) { @@ -2332,6 +2950,22 @@ lpfc_mbx_cmpl_dflt_rpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) return; } +/** + * lpfc_cmpl_els_rsp: Completion callback function for els response iocb cmd. + * @phba: pointer to lpfc hba data structure. + * @cmdiocb: pointer to lpfc command iocb data structure. + * @rspiocb: pointer to lpfc response iocb data structure. + * + * This routine is the completion callback function for ELS Response IOCB + * command. In normal case, this callback function just properly sets the + * nlp_flag bitmap in the ndlp data structure, if the mbox command reference + * field in the command IOCB is not NULL, the referred mailbox command will + * be send out, and then invokes the lpfc_els_free_iocb() routine to release + * the IOCB. Under error conditions, such as when a LS_RJT is returned or a + * link down event occurred during the discovery, the lpfc_nlp_not_used() + * routine shall be invoked trying to release the ndlp if no other threads + * are currently referring it. + **/ static void lpfc_cmpl_els_rsp(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, struct lpfc_iocbq *rspiocb) @@ -2487,6 +3121,31 @@ out: return; } +/** + * lpfc_els_rsp_acc: Prepare and issue an acc response iocb command. + * @vport: pointer to a host virtual N_Port data structure. + * @flag: the els command code to be accepted. + * @oldiocb: pointer to the original lpfc command iocb data structure. + * @ndlp: pointer to a node-list data structure. + * @mbox: pointer to the driver internal queue element for mailbox command. + * + * This routine prepares and issues an Accept (ACC) response IOCB + * command. It uses the @flag to properly set up the IOCB field for the + * specific ACC response command to be issued and invokes the + * lpfc_sli_issue_iocb() routine to send out ACC response IOCB. If a + * @mbox pointer is passed in, it will be put into the context_un.mbox + * field of the IOCB for the completion callback function to issue the + * mailbox command to the HBA later when callback is invoked. + * + * Note that, in lpfc_prep_els_iocb() routine, the reference count of ndlp + * will be incremented by 1 for holding the ndlp and the reference to ndlp + * will be stored into the context1 field of the IOCB for the completion + * callback function to the corresponding response ELS IOCB command. + * + * Return code + * 0 - Successfully issued acc response + * 1 - Failed to issue acc response + **/ int lpfc_els_rsp_acc(struct lpfc_vport *vport, uint32_t flag, struct lpfc_iocbq *oldiocb, struct lpfc_nodelist *ndlp, @@ -2601,6 +3260,28 @@ lpfc_els_rsp_acc(struct lpfc_vport *vport, uint32_t flag, return 0; } +/** + * lpfc_els_rsp_reject: Propare and issue a rjt response iocb command. + * @vport: pointer to a virtual N_Port data structure. + * @rejectError: + * @oldiocb: pointer to the original lpfc command iocb data structure. + * @ndlp: pointer to a node-list data structure. + * @mbox: pointer to the driver internal queue element for mailbox command. + * + * This routine prepares and issue an Reject (RJT) response IOCB + * command. If a @mbox pointer is passed in, it will be put into the + * context_un.mbox field of the IOCB for the completion callback function + * to issue to the HBA later. + * + * Note that, in lpfc_prep_els_iocb() routine, the reference count of ndlp + * will be incremented by 1 for holding the ndlp and the reference to ndlp + * will be stored into the context1 field of the IOCB for the completion + * callback function to the reject response ELS IOCB command. + * + * Return code + * 0 - Successfully issued reject response + * 1 - Failed to issue reject response + **/ int lpfc_els_rsp_reject(struct lpfc_vport *vport, uint32_t rejectError, struct lpfc_iocbq *oldiocb, struct lpfc_nodelist *ndlp, @@ -2660,6 +3341,25 @@ lpfc_els_rsp_reject(struct lpfc_vport *vport, uint32_t rejectError, return 0; } +/** + * lpfc_els_rsp_adisc_acc: Prepare and issue acc response to adisc iocb cmd. + * @vport: pointer to a virtual N_Port data structure. + * @oldiocb: pointer to the original lpfc command iocb data structure. + * @ndlp: pointer to a node-list data structure. + * + * This routine prepares and issues an Accept (ACC) response to Address + * Discover (ADISC) ELS command. It simply prepares the payload of the IOCB + * and invokes the lpfc_sli_issue_iocb() routine to send out the command. + * + * Note that, in lpfc_prep_els_iocb() routine, the reference count of ndlp + * will be incremented by 1 for holding the ndlp and the reference to ndlp + * will be stored into the context1 field of the IOCB for the completion + * callback function to the ADISC Accept response ELS IOCB command. + * + * Return code + * 0 - Successfully issued acc adisc response + * 1 - Failed to issue adisc acc response + **/ int lpfc_els_rsp_adisc_acc(struct lpfc_vport *vport, struct lpfc_iocbq *oldiocb, struct lpfc_nodelist *ndlp) @@ -2716,6 +3416,25 @@ lpfc_els_rsp_adisc_acc(struct lpfc_vport *vport, struct lpfc_iocbq *oldiocb, return 0; } +/** + * lpfc_els_rsp_prli_acc: Prepare and issue acc response to prli iocb cmd. + * @vport: pointer to a virtual N_Port data structure. + * @oldiocb: pointer to the original lpfc command iocb data structure. + * @ndlp: pointer to a node-list data structure. + * + * This routine prepares and issues an Accept (ACC) response to Process + * Login (PRLI) ELS command. It simply prepares the payload of the IOCB + * and invokes the lpfc_sli_issue_iocb() routine to send out the command. + * + * Note that, in lpfc_prep_els_iocb() routine, the reference count of ndlp + * will be incremented by 1 for holding the ndlp and the reference to ndlp + * will be stored into the context1 field of the IOCB for the completion + * callback function to the PRLI Accept response ELS IOCB command. + * + * Return code + * 0 - Successfully issued acc prli response + * 1 - Failed to issue acc prli response + **/ int lpfc_els_rsp_prli_acc(struct lpfc_vport *vport, struct lpfc_iocbq *oldiocb, struct lpfc_nodelist *ndlp) @@ -2795,6 +3514,32 @@ lpfc_els_rsp_prli_acc(struct lpfc_vport *vport, struct lpfc_iocbq *oldiocb, return 0; } +/** + * lpfc_els_rsp_rnid_acc: Issue rnid acc response iocb command. + * @vport: pointer to a virtual N_Port data structure. + * @format: rnid command format. + * @oldiocb: pointer to the original lpfc command iocb data structure. + * @ndlp: pointer to a node-list data structure. + * + * This routine issues a Request Node Identification Data (RNID) Accept + * (ACC) response. It constructs the RNID ACC response command according to + * the proper @format and then calls the lpfc_sli_issue_iocb() routine to + * issue the response. Note that this command does not need to hold the ndlp + * reference count for the callback. So, the ndlp reference count taken by + * the lpfc_prep_els_iocb() routine is put back and the context1 field of + * IOCB is set to NULL to indicate to the lpfc_els_free_iocb() routine that + * there is no ndlp reference available. + * + * Note that, in lpfc_prep_els_iocb() routine, the reference count of ndlp + * will be incremented by 1 for holding the ndlp and the reference to ndlp + * will be stored into the context1 field of the IOCB for the completion + * callback function. However, for the RNID Accept Response ELS command, + * this is undone later by this routine after the IOCB is allocated. + * + * Return code + * 0 - Successfully issued acc rnid response + * 1 - Failed to issue acc rnid response + **/ static int lpfc_els_rsp_rnid_acc(struct lpfc_vport *vport, uint8_t format, struct lpfc_iocbq *oldiocb, struct lpfc_nodelist *ndlp) @@ -2875,6 +3620,25 @@ lpfc_els_rsp_rnid_acc(struct lpfc_vport *vport, uint8_t format, return 0; } +/** + * lpfc_els_disc_adisc: Issue remaining adisc iocbs to npr nodes of a vport. + * @vport: pointer to a host virtual N_Port data structure. + * + * This routine issues Address Discover (ADISC) ELS commands to those + * N_Ports which are in node port recovery state and ADISC has not been issued + * for the @vport. Each time an ELS ADISC IOCB is issued by invoking the + * lpfc_issue_els_adisc() routine, the per @vport number of discover count + * (num_disc_nodes) shall be incremented. If the num_disc_nodes reaches a + * pre-configured threshold (cfg_discovery_threads), the @vport fc_flag will + * be marked with FC_NLP_MORE bit and the process of issuing remaining ADISC + * IOCBs quit for later pick up. On the other hand, after walking through + * all the ndlps with the @vport and there is none ADISC IOCB issued, the + * @vport fc_flag shall be cleared with FC_NLP_MORE bit indicating there is + * no more ADISC need to be sent. + * + * Return code + * The number of N_Ports with adisc issued. + **/ int lpfc_els_disc_adisc(struct lpfc_vport *vport) { @@ -2914,6 +3678,25 @@ lpfc_els_disc_adisc(struct lpfc_vport *vport) return sentadisc; } +/** + * lpfc_els_disc_plogi: Issue plogi for all npr nodes of a vport before adisc. + * @vport: pointer to a host virtual N_Port data structure. + * + * This routine issues Port Login (PLOGI) ELS commands to all the N_Ports + * which are in node port recovery state, with a @vport. Each time an ELS + * ADISC PLOGI IOCB is issued by invoking the lpfc_issue_els_plogi() routine, + * the per @vport number of discover count (num_disc_nodes) shall be + * incremented. If the num_disc_nodes reaches a pre-configured threshold + * (cfg_discovery_threads), the @vport fc_flag will be marked with FC_NLP_MORE + * bit set and quit the process of issuing remaining ADISC PLOGIN IOCBs for + * later pick up. On the other hand, after walking through all the ndlps with + * the @vport and there is none ADISC PLOGI IOCB issued, the @vport fc_flag + * shall be cleared with the FC_NLP_MORE bit indicating there is no more ADISC + * PLOGI need to be sent. + * + * Return code + * The number of N_Ports with plogi issued. + **/ int lpfc_els_disc_plogi(struct lpfc_vport *vport) { @@ -2954,6 +3737,15 @@ lpfc_els_disc_plogi(struct lpfc_vport *vport) return sentplogi; } +/** + * lpfc_els_flush_rscn: Clean up any rscn activities with a vport. + * @vport: pointer to a host virtual N_Port data structure. + * + * This routine cleans up any Registration State Change Notification + * (RSCN) activity with a @vport. Note that the fc_rscn_flush flag of the + * @vport together with the host_lock is used to prevent multiple thread + * trying to access the RSCN array on a same @vport at the same time. + **/ void lpfc_els_flush_rscn(struct lpfc_vport *vport) { @@ -2984,6 +3776,18 @@ lpfc_els_flush_rscn(struct lpfc_vport *vport) vport->fc_rscn_flush = 0; } +/** + * lpfc_rscn_payload_check: Check whether there is a pending rscn to a did. + * @vport: pointer to a host virtual N_Port data structure. + * @did: remote destination port identifier. + * + * This routine checks whether there is any pending Registration State + * Configuration Notification (RSCN) to a @did on @vport. + * + * Return code + * None zero - The @did matched with a pending rscn + * 0 - not able to match @did with a pending rscn + **/ int lpfc_rscn_payload_check(struct lpfc_vport *vport, uint32_t did) { @@ -3053,6 +3857,17 @@ return_did_out: return did; } +/** + * lpfc_rscn_recovery_check: Send recovery event to vport nodes matching rscn + * @vport: pointer to a host virtual N_Port data structure. + * + * This routine sends recovery (NLP_EVT_DEVICE_RECOVERY) event to the + * state machine for a @vport's nodes that are with pending RSCN (Registration + * State Change Notification). + * + * Return code + * 0 - Successful (currently alway return 0) + **/ static int lpfc_rscn_recovery_check(struct lpfc_vport *vport) { @@ -3071,6 +3886,28 @@ lpfc_rscn_recovery_check(struct lpfc_vport *vport) return 0; } +/** + * lpfc_els_rcv_rscn: Process an unsolicited rscn iocb. + * @vport: pointer to a host virtual N_Port data structure. + * @cmdiocb: pointer to lpfc command iocb data structure. + * @ndlp: pointer to a node-list data structure. + * + * This routine processes an unsolicited RSCN (Registration State Change + * Notification) IOCB. First, the payload of the unsolicited RSCN is walked + * to invoke fc_host_post_event() routine to the FC transport layer. If the + * discover state machine is about to begin discovery, it just accepts the + * RSCN and the discovery process will satisfy the RSCN. If this RSCN only + * contains N_Port IDs for other vports on this HBA, it just accepts the + * RSCN and ignore processing it. If the state machine is in the recovery + * state, the fc_rscn_id_list of this @vport is walked and the + * lpfc_rscn_recovery_check() routine is invoked to send recovery event for + * all nodes that match RSCN payload. Otherwise, the lpfc_els_handle_rscn() + * routine is invoked to handle the RSCN event. + * + * Return code + * 0 - Just sent the acc response + * 1 - Sent the acc response and waited for name server completion + **/ static int lpfc_els_rcv_rscn(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, struct lpfc_nodelist *ndlp) @@ -3130,7 +3967,7 @@ lpfc_els_rcv_rscn(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, if (rscn_id == hba_id) { /* ALL NPortIDs in RSCN are on HBA */ lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY, - "0214 Ignore RSCN " + "0219 Ignore RSCN " "Data: x%x x%x x%x x%x\n", vport->fc_flag, payload_len, *lp, vport->fc_rscn_id_cnt); @@ -3241,6 +4078,22 @@ lpfc_els_rcv_rscn(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, return lpfc_els_handle_rscn(vport); } +/** + * lpfc_els_handle_rscn: Handle rscn for a vport. + * @vport: pointer to a host virtual N_Port data structure. + * + * This routine handles the Registration State Configuration Notification + * (RSCN) for a @vport. If login to NameServer does not exist, a new ndlp shall + * be created and a Port Login (PLOGI) to the NameServer is issued. Otherwise, + * if the ndlp to NameServer exists, a Common Transport (CT) command to the + * NameServer shall be issued. If CT command to the NameServer fails to be + * issued, the lpfc_els_flush_rscn() routine shall be invoked to clean up any + * RSCN activities with the @vport. + * + * Return code + * 0 - Cleaned up rscn on the @vport + * 1 - Wait for plogi to name server before proceed + **/ int lpfc_els_handle_rscn(struct lpfc_vport *vport) { @@ -3313,6 +4166,31 @@ lpfc_els_handle_rscn(struct lpfc_vport *vport) return 0; } +/** + * lpfc_els_rcv_flogi: Process an unsolicited flogi iocb. + * @vport: pointer to a host virtual N_Port data structure. + * @cmdiocb: pointer to lpfc command iocb data structure. + * @ndlp: pointer to a node-list data structure. + * + * This routine processes Fabric Login (FLOGI) IOCB received as an ELS + * unsolicited event. An unsolicited FLOGI can be received in a point-to- + * point topology. As an unsolicited FLOGI should not be received in a loop + * mode, any unsolicited FLOGI received in loop mode shall be ignored. The + * lpfc_check_sparm() routine is invoked to check the parameters in the + * unsolicited FLOGI. If parameters validation failed, the routine + * lpfc_els_rsp_reject() shall be called with reject reason code set to + * LSEXP_SPARM_OPTIONS to reject the FLOGI. Otherwise, the Port WWN in the + * FLOGI shall be compared with the Port WWN of the @vport to determine who + * will initiate PLOGI. The higher lexicographical value party shall has + * higher priority (as the winning port) and will initiate PLOGI and + * communicate Port_IDs (Addresses) for both nodes in PLOGI. The result + * of this will be marked in the @vport fc_flag field with FC_PT2PT_PLOGI + * and then the lpfc_els_rsp_acc() routine is invoked to accept the FLOGI. + * + * Return code + * 0 - Successfully processed the unsolicited flogi + * 1 - Failed to process the unsolicited flogi + **/ static int lpfc_els_rcv_flogi(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, struct lpfc_nodelist *ndlp) @@ -3402,6 +4280,22 @@ lpfc_els_rcv_flogi(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, return 0; } +/** + * lpfc_els_rcv_rnid: Process an unsolicited rnid iocb. + * @vport: pointer to a host virtual N_Port data structure. + * @cmdiocb: pointer to lpfc command iocb data structure. + * @ndlp: pointer to a node-list data structure. + * + * This routine processes Request Node Identification Data (RNID) IOCB + * received as an ELS unsolicited event. Only when the RNID specified format + * 0x0 or 0xDF (Topology Discovery Specific Node Identification Data) + * present, this routine will invoke the lpfc_els_rsp_rnid_acc() routine to + * Accept (ACC) the RNID ELS command. All the other RNID formats are + * rejected by invoking the lpfc_els_rsp_reject() routine. + * + * Return code + * 0 - Successfully processed rnid iocb (currently always return 0) + **/ static int lpfc_els_rcv_rnid(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, struct lpfc_nodelist *ndlp) @@ -3441,6 +4335,19 @@ lpfc_els_rcv_rnid(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, return 0; } +/** + * lpfc_els_rcv_lirr: Process an unsolicited lirr iocb. + * @vport: pointer to a host virtual N_Port data structure. + * @cmdiocb: pointer to lpfc command iocb data structure. + * @ndlp: pointer to a node-list data structure. + * + * This routine processes a Link Incident Report Registration(LIRR) IOCB + * received as an ELS unsolicited event. Currently, this function just invokes + * the lpfc_els_rsp_reject() routine to reject the LIRR IOCB unconditionally. + * + * Return code + * 0 - Successfully processed lirr iocb (currently always return 0) + **/ static int lpfc_els_rcv_lirr(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, struct lpfc_nodelist *ndlp) @@ -3456,6 +4363,25 @@ lpfc_els_rcv_lirr(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, return 0; } +/** + * lpfc_els_rsp_rps_acc: Completion callbk func for MBX_READ_LNK_STAT mbox cmd. + * @phba: pointer to lpfc hba data structure. + * @pmb: pointer to the driver internal queue element for mailbox command. + * + * This routine is the completion callback function for the MBX_READ_LNK_STAT + * mailbox command. This callback function is to actually send the Accept + * (ACC) response to a Read Port Status (RPS) unsolicited IOCB event. It + * collects the link statistics from the completion of the MBX_READ_LNK_STAT + * mailbox command, constructs the RPS response with the link statistics + * collected, and then invokes the lpfc_sli_issue_iocb() routine to send ACC + * response to the RPS. + * + * Note that, in lpfc_prep_els_iocb() routine, the reference count of ndlp + * will be incremented by 1 for holding the ndlp and the reference to ndlp + * will be stored into the context1 field of the IOCB for the completion + * callback function to the RPS Accept Response ELS IOCB command. + * + **/ static void lpfc_els_rsp_rps_acc(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) { @@ -3531,6 +4457,24 @@ lpfc_els_rsp_rps_acc(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) return; } +/** + * lpfc_els_rcv_rps: Process an unsolicited rps iocb. + * @vport: pointer to a host virtual N_Port data structure. + * @cmdiocb: pointer to lpfc command iocb data structure. + * @ndlp: pointer to a node-list data structure. + * + * This routine processes Read Port Status (RPS) IOCB received as an + * ELS unsolicited event. It first checks the remote port state. If the + * remote port is not in NLP_STE_UNMAPPED_NODE state or NLP_STE_MAPPED_NODE + * state, it invokes the lpfc_els_rsp_reject() routine to send the reject + * response. Otherwise, it issue the MBX_READ_LNK_STAT mailbox command + * for reading the HBA link statistics. It is for the callback function, + * lpfc_els_rsp_rps_acc(), set to the MBX_READ_LNK_STAT mailbox command + * to actually sending out RPS Accept (ACC) response. + * + * Return codes + * 0 - Successfully processed rps iocb (currently always return 0) + **/ static int lpfc_els_rcv_rps(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, struct lpfc_nodelist *ndlp) @@ -3544,14 +4488,9 @@ lpfc_els_rcv_rps(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, struct ls_rjt stat; if ((ndlp->nlp_state != NLP_STE_UNMAPPED_NODE) && - (ndlp->nlp_state != NLP_STE_MAPPED_NODE)) { - stat.un.b.lsRjtRsvd0 = 0; - stat.un.b.lsRjtRsnCode = LSRJT_UNABLE_TPC; - stat.un.b.lsRjtRsnCodeExp = LSEXP_CANT_GIVE_DATA; - stat.un.b.vendorUnique = 0; - lpfc_els_rsp_reject(vport, stat.un.lsRjtError, cmdiocb, ndlp, - NULL); - } + (ndlp->nlp_state != NLP_STE_MAPPED_NODE)) + /* reject the unsolicited RPS request and done with it */ + goto reject_out; pcmd = (struct lpfc_dmabuf *) cmdiocb->context2; lp = (uint32_t *) pcmd->virt; @@ -3584,6 +4523,9 @@ lpfc_els_rcv_rps(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, mempool_free(mbox, phba->mbox_mem_pool); } } + +reject_out: + /* issue rejection response */ stat.un.b.lsRjtRsvd0 = 0; stat.un.b.lsRjtRsnCode = LSRJT_UNABLE_TPC; stat.un.b.lsRjtRsnCodeExp = LSEXP_CANT_GIVE_DATA; @@ -3592,6 +4534,25 @@ lpfc_els_rcv_rps(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, return 0; } +/** + * lpfc_els_rsp_rpl_acc: Issue an accept rpl els command. + * @vport: pointer to a host virtual N_Port data structure. + * @cmdsize: size of the ELS command. + * @oldiocb: pointer to the original lpfc command iocb data structure. + * @ndlp: pointer to a node-list data structure. + * + * This routine issuees an Accept (ACC) Read Port List (RPL) ELS command. + * It is to be called by the lpfc_els_rcv_rpl() routine to accept the RPL. + * + * Note that, in lpfc_prep_els_iocb() routine, the reference count of ndlp + * will be incremented by 1 for holding the ndlp and the reference to ndlp + * will be stored into the context1 field of the IOCB for the completion + * callback function to the RPL Accept Response ELS command. + * + * Return code + * 0 - Successfully issued ACC RPL ELS command + * 1 - Failed to issue ACC RPL ELS command + **/ static int lpfc_els_rsp_rpl_acc(struct lpfc_vport *vport, uint16_t cmdsize, struct lpfc_iocbq *oldiocb, struct lpfc_nodelist *ndlp) @@ -3645,6 +4606,22 @@ lpfc_els_rsp_rpl_acc(struct lpfc_vport *vport, uint16_t cmdsize, return 0; } +/** + * lpfc_els_rcv_rpl: Process an unsolicited rpl iocb. + * @vport: pointer to a host virtual N_Port data structure. + * @cmdiocb: pointer to lpfc command iocb data structure. + * @ndlp: pointer to a node-list data structure. + * + * This routine processes Read Port List (RPL) IOCB received as an ELS + * unsolicited event. It first checks the remote port state. If the remote + * port is not in NLP_STE_UNMAPPED_NODE and NLP_STE_MAPPED_NODE states, it + * invokes the lpfc_els_rsp_reject() routine to send reject response. + * Otherwise, this routine then invokes the lpfc_els_rsp_rpl_acc() routine + * to accept the RPL. + * + * Return code + * 0 - Successfully processed rpl iocb (currently always return 0) + **/ static int lpfc_els_rcv_rpl(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, struct lpfc_nodelist *ndlp) @@ -3658,12 +4635,15 @@ lpfc_els_rcv_rpl(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, if ((ndlp->nlp_state != NLP_STE_UNMAPPED_NODE) && (ndlp->nlp_state != NLP_STE_MAPPED_NODE)) { + /* issue rejection response */ stat.un.b.lsRjtRsvd0 = 0; stat.un.b.lsRjtRsnCode = LSRJT_UNABLE_TPC; stat.un.b.lsRjtRsnCodeExp = LSEXP_CANT_GIVE_DATA; stat.un.b.vendorUnique = 0; lpfc_els_rsp_reject(vport, stat.un.lsRjtError, cmdiocb, ndlp, NULL); + /* rejected the unsolicited RPL request and done with it */ + return 0; } pcmd = (struct lpfc_dmabuf *) cmdiocb->context2; @@ -3685,6 +4665,30 @@ lpfc_els_rcv_rpl(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, return 0; } +/** + * lpfc_els_rcv_farp: Process an unsolicited farp request els command. + * @vport: pointer to a virtual N_Port data structure. + * @cmdiocb: pointer to lpfc command iocb data structure. + * @ndlp: pointer to a node-list data structure. + * + * This routine processes Fibre Channel Address Resolution Protocol + * (FARP) Request IOCB received as an ELS unsolicited event. Currently, + * the lpfc driver only supports matching on WWPN or WWNN for FARP. As such, + * FARP_MATCH_PORT flag and FARP_MATCH_NODE flag are checked against the + * Match Flag in the FARP request IOCB: if FARP_MATCH_PORT flag is set, the + * remote PortName is compared against the FC PortName stored in the @vport + * data structure; if FARP_MATCH_NODE flag is set, the remote NodeName is + * compared against the FC NodeName stored in the @vport data structure. + * If any of these matches and the FARP_REQUEST_FARPR flag is set in the + * FARP request IOCB Response Flag, the lpfc_issue_els_farpr() routine is + * invoked to send out FARP Response to the remote node. Before sending the + * FARP Response, however, the FARP_REQUEST_PLOGI flag is check in the FARP + * request IOCB Response Flag and, if it is set, the lpfc_issue_els_plogi() + * routine is invoked to log into the remote port first. + * + * Return code + * 0 - Either the FARP Match Mode not supported or successfully processed + **/ static int lpfc_els_rcv_farp(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, struct lpfc_nodelist *ndlp) @@ -3744,6 +4748,20 @@ lpfc_els_rcv_farp(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, return 0; } +/** + * lpfc_els_rcv_farpr: Process an unsolicited farp response iocb. + * @vport: pointer to a host virtual N_Port data structure. + * @cmdiocb: pointer to lpfc command iocb data structure. + * @ndlp: pointer to a node-list data structure. + * + * This routine processes Fibre Channel Address Resolution Protocol + * Response (FARPR) IOCB received as an ELS unsolicited event. It simply + * invokes the lpfc_els_rsp_acc() routine to the remote node to accept + * the FARP response request. + * + * Return code + * 0 - Successfully processed FARPR IOCB (currently always return 0) + **/ static int lpfc_els_rcv_farpr(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, struct lpfc_nodelist *ndlp) @@ -3768,6 +4786,25 @@ lpfc_els_rcv_farpr(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, return 0; } +/** + * lpfc_els_rcv_fan: Process an unsolicited fan iocb command. + * @vport: pointer to a host virtual N_Port data structure. + * @cmdiocb: pointer to lpfc command iocb data structure. + * @fan_ndlp: pointer to a node-list data structure. + * + * This routine processes a Fabric Address Notification (FAN) IOCB + * command received as an ELS unsolicited event. The FAN ELS command will + * only be processed on a physical port (i.e., the @vport represents the + * physical port). The fabric NodeName and PortName from the FAN IOCB are + * compared against those in the phba data structure. If any of those is + * different, the lpfc_initial_flogi() routine is invoked to initialize + * Fabric Login (FLOGI) to the fabric to start the discover over. Otherwise, + * if both of those are identical, the lpfc_issue_fabric_reglogin() routine + * is invoked to register login to the fabric. + * + * Return code + * 0 - Successfully processed fan iocb (currently always return 0). + **/ static int lpfc_els_rcv_fan(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, struct lpfc_nodelist *fan_ndlp) @@ -3797,6 +4834,16 @@ lpfc_els_rcv_fan(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, return 0; } +/** + * lpfc_els_timeout: Handler funciton to the els timer. + * @ptr: holder for the timer function associated data. + * + * This routine is invoked by the ELS timer after timeout. It posts the ELS + * timer timeout event by setting the WORKER_ELS_TMO bit to the work port + * event bitmap and then invokes the lpfc_worker_wake_up() routine to wake + * up the worker thread. It is for the worker thread to invoke the routine + * lpfc_els_timeout_handler() to work on the posted event WORKER_ELS_TMO. + **/ void lpfc_els_timeout(unsigned long ptr) { @@ -3816,6 +4863,15 @@ lpfc_els_timeout(unsigned long ptr) return; } +/** + * lpfc_els_timeout_handler: Process an els timeout event. + * @vport: pointer to a virtual N_Port data structure. + * + * This routine is the actual handler function that processes an ELS timeout + * event. It walks the ELS ring to get and abort all the IOCBs (except the + * ABORT/CLOSE/FARP/FARPR/FDISC), which are associated with the @vport by + * invoking the lpfc_sli_issue_abort_iotag() routine. + **/ void lpfc_els_timeout_handler(struct lpfc_vport *vport) { @@ -3886,6 +4942,26 @@ lpfc_els_timeout_handler(struct lpfc_vport *vport) mod_timer(&vport->els_tmofunc, jiffies + HZ * timeout); } +/** + * lpfc_els_flush_cmd: Clean up the outstanding els commands to a vport. + * @vport: pointer to a host virtual N_Port data structure. + * + * This routine is used to clean up all the outstanding ELS commands on a + * @vport. It first aborts the @vport by invoking lpfc_fabric_abort_vport() + * routine. After that, it walks the ELS transmit queue to remove all the + * IOCBs with the @vport other than the QUE_RING and ABORT/CLOSE IOCBs. For + * the IOCBs with a non-NULL completion callback function, the callback + * function will be invoked with the status set to IOSTAT_LOCAL_REJECT and + * un.ulpWord[4] set to IOERR_SLI_ABORTED. For IOCBs with a NULL completion + * callback function, the IOCB will simply be released. Finally, it walks + * the ELS transmit completion queue to issue an abort IOCB to any transmit + * completion queue IOCB that is associated with the @vport and is not + * an IOCB from libdfc (i.e., the management plane IOCBs that are not + * part of the discovery state machine) out to HBA by invoking the + * lpfc_sli_issue_abort_iotag() routine. Note that this function issues the + * abort IOCB to any transmit completion queueed IOCB, it does not guarantee + * the IOCBs are aborted when this function returns. + **/ void lpfc_els_flush_cmd(struct lpfc_vport *vport) { @@ -3948,6 +5024,23 @@ lpfc_els_flush_cmd(struct lpfc_vport *vport) return; } +/** + * lpfc_els_flush_all_cmd: Clean up all the outstanding els commands to a HBA. + * @phba: pointer to lpfc hba data structure. + * + * This routine is used to clean up all the outstanding ELS commands on a + * @phba. It first aborts the @phba by invoking the lpfc_fabric_abort_hba() + * routine. After that, it walks the ELS transmit queue to remove all the + * IOCBs to the @phba other than the QUE_RING and ABORT/CLOSE IOCBs. For + * the IOCBs with the completion callback function associated, the callback + * function will be invoked with the status set to IOSTAT_LOCAL_REJECT and + * un.ulpWord[4] set to IOERR_SLI_ABORTED. For IOCBs without the completion + * callback function associated, the IOCB will simply be released. Finally, + * it walks the ELS transmit completion queue to issue an abort IOCB to any + * transmit completion queue IOCB that is not an IOCB from libdfc (i.e., the + * management plane IOCBs that are not part of the discovery state machine) + * out to HBA by invoking the lpfc_sli_issue_abort_iotag() routine. + **/ void lpfc_els_flush_all_cmd(struct lpfc_hba *phba) { @@ -3992,6 +5085,130 @@ lpfc_els_flush_all_cmd(struct lpfc_hba *phba) return; } +/** + * lpfc_send_els_failure_event: Posts an ELS command failure event. + * @phba: Pointer to hba context object. + * @cmdiocbp: Pointer to command iocb which reported error. + * @rspiocbp: Pointer to response iocb which reported error. + * + * This function sends an event when there is an ELS command + * failure. + **/ +void +lpfc_send_els_failure_event(struct lpfc_hba *phba, + struct lpfc_iocbq *cmdiocbp, + struct lpfc_iocbq *rspiocbp) +{ + struct lpfc_vport *vport = cmdiocbp->vport; + struct Scsi_Host *shost = lpfc_shost_from_vport(vport); + struct lpfc_lsrjt_event lsrjt_event; + struct lpfc_fabric_event_header fabric_event; + struct ls_rjt stat; + struct lpfc_nodelist *ndlp; + uint32_t *pcmd; + + ndlp = cmdiocbp->context1; + if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) + return; + + if (rspiocbp->iocb.ulpStatus == IOSTAT_LS_RJT) { + lsrjt_event.header.event_type = FC_REG_ELS_EVENT; + lsrjt_event.header.subcategory = LPFC_EVENT_LSRJT_RCV; + memcpy(lsrjt_event.header.wwpn, &ndlp->nlp_portname, + sizeof(struct lpfc_name)); + memcpy(lsrjt_event.header.wwnn, &ndlp->nlp_nodename, + sizeof(struct lpfc_name)); + pcmd = (uint32_t *) (((struct lpfc_dmabuf *) + cmdiocbp->context2)->virt); + lsrjt_event.command = *pcmd; + stat.un.lsRjtError = be32_to_cpu(rspiocbp->iocb.un.ulpWord[4]); + lsrjt_event.reason_code = stat.un.b.lsRjtRsnCode; + lsrjt_event.explanation = stat.un.b.lsRjtRsnCodeExp; + fc_host_post_vendor_event(shost, + fc_get_event_number(), + sizeof(lsrjt_event), + (char *)&lsrjt_event, + SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_EMULEX); + return; + } + if ((rspiocbp->iocb.ulpStatus == IOSTAT_NPORT_BSY) || + (rspiocbp->iocb.ulpStatus == IOSTAT_FABRIC_BSY)) { + fabric_event.event_type = FC_REG_FABRIC_EVENT; + if (rspiocbp->iocb.ulpStatus == IOSTAT_NPORT_BSY) + fabric_event.subcategory = LPFC_EVENT_PORT_BUSY; + else + fabric_event.subcategory = LPFC_EVENT_FABRIC_BUSY; + memcpy(fabric_event.wwpn, &ndlp->nlp_portname, + sizeof(struct lpfc_name)); + memcpy(fabric_event.wwnn, &ndlp->nlp_nodename, + sizeof(struct lpfc_name)); + fc_host_post_vendor_event(shost, + fc_get_event_number(), + sizeof(fabric_event), + (char *)&fabric_event, + SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_EMULEX); + return; + } + +} + +/** + * lpfc_send_els_event: Posts unsolicited els event. + * @vport: Pointer to vport object. + * @ndlp: Pointer FC node object. + * @cmd: ELS command code. + * + * This function posts an event when there is an incoming + * unsolicited ELS command. + **/ +static void +lpfc_send_els_event(struct lpfc_vport *vport, + struct lpfc_nodelist *ndlp, + uint32_t cmd) +{ + struct lpfc_els_event_header els_data; + struct Scsi_Host *shost = lpfc_shost_from_vport(vport); + + els_data.event_type = FC_REG_ELS_EVENT; + switch (cmd) { + case ELS_CMD_PLOGI: + els_data.subcategory = LPFC_EVENT_PLOGI_RCV; + break; + case ELS_CMD_PRLO: + els_data.subcategory = LPFC_EVENT_PRLO_RCV; + break; + case ELS_CMD_ADISC: + els_data.subcategory = LPFC_EVENT_ADISC_RCV; + break; + default: + return; + } + memcpy(els_data.wwpn, &ndlp->nlp_portname, sizeof(struct lpfc_name)); + memcpy(els_data.wwnn, &ndlp->nlp_nodename, sizeof(struct lpfc_name)); + fc_host_post_vendor_event(shost, + fc_get_event_number(), + sizeof(els_data), + (char *)&els_data, + SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_EMULEX); + + return; +} + + +/** + * lpfc_els_unsol_buffer: Process an unsolicited event data buffer. + * @phba: pointer to lpfc hba data structure. + * @pring: pointer to a SLI ring. + * @vport: pointer to a host virtual N_Port data structure. + * @elsiocb: pointer to lpfc els command iocb data structure. + * + * This routine is used for processing the IOCB associated with a unsolicited + * event. It first determines whether there is an existing ndlp that matches + * the DID from the unsolicited IOCB. If not, it will create a new one with + * the DID from the unsolicited IOCB. The ELS command from the unsolicited + * IOCB is then used to invoke the proper routine and to set up proper state + * of the discovery state machine. + **/ static void lpfc_els_unsol_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, struct lpfc_vport *vport, struct lpfc_iocbq *elsiocb) @@ -4059,8 +5276,6 @@ lpfc_els_unsol_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, } phba->fc_stat.elsRcvFrame++; - if (elsiocb->context1) - lpfc_nlp_put(elsiocb->context1); elsiocb->context1 = lpfc_nlp_get(ndlp); elsiocb->vport = vport; @@ -4081,6 +5296,7 @@ lpfc_els_unsol_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, phba->fc_stat.elsRcvPLOGI++; ndlp = lpfc_plogi_confirm_nport(phba, payload, ndlp); + lpfc_send_els_event(vport, ndlp, cmd); if (vport->port_state < LPFC_DISC_AUTH) { if (!(phba->pport->fc_flag & FC_PT2PT) || (phba->pport->fc_flag & FC_PT2PT_PLOGI)) { @@ -4130,6 +5346,7 @@ lpfc_els_unsol_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, did, vport->port_state, ndlp->nlp_flag); phba->fc_stat.elsRcvPRLO++; + lpfc_send_els_event(vport, ndlp, cmd); if (vport->port_state < LPFC_DISC_AUTH) { rjt_err = LSRJT_UNABLE_TPC; break; @@ -4147,6 +5364,7 @@ lpfc_els_unsol_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, "RCV ADISC: did:x%x/ste:x%x flg:x%x", did, vport->port_state, ndlp->nlp_flag); + lpfc_send_els_event(vport, ndlp, cmd); phba->fc_stat.elsRcvADISC++; if (vport->port_state < LPFC_DISC_AUTH) { rjt_err = LSRJT_UNABLE_TPC; @@ -4270,6 +5488,8 @@ lpfc_els_unsol_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, NULL); } + lpfc_nlp_put(elsiocb->context1); + elsiocb->context1 = NULL; return; dropit: @@ -4282,6 +5502,19 @@ dropit: phba->fc_stat.elsRcvDrop++; } +/** + * lpfc_find_vport_by_vpid: Find a vport on a HBA through vport identifier. + * @phba: pointer to lpfc hba data structure. + * @vpi: host virtual N_Port identifier. + * + * This routine finds a vport on a HBA (referred by @phba) through a + * @vpi. The function walks the HBA's vport list and returns the address + * of the vport with the matching @vpi. + * + * Return code + * NULL - No vport with the matching @vpi found + * Otherwise - Address to the vport with the matching @vpi. + **/ static struct lpfc_vport * lpfc_find_vport_by_vpid(struct lpfc_hba *phba, uint16_t vpi) { @@ -4299,6 +5532,18 @@ lpfc_find_vport_by_vpid(struct lpfc_hba *phba, uint16_t vpi) return NULL; } +/** + * lpfc_els_unsol_event: Process an unsolicited event from an els sli ring. + * @phba: pointer to lpfc hba data structure. + * @pring: pointer to a SLI ring. + * @elsiocb: pointer to lpfc els iocb data structure. + * + * This routine is used to process an unsolicited event received from a SLI + * (Service Level Interface) ring. The actual processing of the data buffer + * associated with the unsolicited event is done by invoking the routine + * lpfc_els_unsol_buffer() after properly set up the iocb buffer from the + * SLI ring on which the unsolicited event was received. + **/ void lpfc_els_unsol_event(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, struct lpfc_iocbq *elsiocb) @@ -4309,6 +5554,7 @@ lpfc_els_unsol_event(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, struct lpfc_dmabuf *bdeBuf1 = elsiocb->context2; struct lpfc_dmabuf *bdeBuf2 = elsiocb->context3; + elsiocb->context1 = NULL; elsiocb->context2 = NULL; elsiocb->context3 = NULL; @@ -4356,8 +5602,6 @@ lpfc_els_unsol_event(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, * The different unsolicited event handlers would tell us * if they are done with "mp" by setting context2 to NULL. */ - lpfc_nlp_put(elsiocb->context1); - elsiocb->context1 = NULL; if (elsiocb->context2) { lpfc_in_buf_free(phba, (struct lpfc_dmabuf *)elsiocb->context2); elsiocb->context2 = NULL; @@ -4376,6 +5620,19 @@ lpfc_els_unsol_event(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, } } +/** + * lpfc_do_scr_ns_plogi: Issue a plogi to the name server for scr. + * @phba: pointer to lpfc hba data structure. + * @vport: pointer to a virtual N_Port data structure. + * + * This routine issues a Port Login (PLOGI) to the Name Server with + * State Change Request (SCR) for a @vport. This routine will create an + * ndlp for the Name Server associated to the @vport if such node does + * not already exist. The PLOGI to Name Server is issued by invoking the + * lpfc_issue_els_plogi() routine. If Fabric-Device Management Interface + * (FDMI) is configured to the @vport, a FDMI node will be created and + * the PLOGI to FDMI is issued by invoking lpfc_issue_els_plogi() routine. + **/ void lpfc_do_scr_ns_plogi(struct lpfc_hba *phba, struct lpfc_vport *vport) { @@ -4434,6 +5691,18 @@ lpfc_do_scr_ns_plogi(struct lpfc_hba *phba, struct lpfc_vport *vport) return; } +/** + * lpfc_cmpl_reg_new_vport: Completion callback function to register new vport. + * @phba: pointer to lpfc hba data structure. + * @pmb: pointer to the driver internal queue element for mailbox command. + * + * This routine is the completion callback function to register new vport + * mailbox command. If the new vport mailbox command completes successfully, + * the fabric registration login shall be performed on physical port (the + * new vport created is actually a physical port, with VPI 0) or the port + * login to Name Server for State Change Request (SCR) will be performed + * on virtual port (real virtual port, with VPI greater than 0). + **/ static void lpfc_cmpl_reg_new_vport(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) { @@ -4491,6 +5760,15 @@ lpfc_cmpl_reg_new_vport(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) return; } +/** + * lpfc_register_new_vport: Register a new vport with a HBA. + * @phba: pointer to lpfc hba data structure. + * @vport: pointer to a host virtual N_Port data structure. + * @ndlp: pointer to a node-list data structure. + * + * This routine registers the @vport as a new virtual port with a HBA. + * It is done through a registering vpi mailbox command. + **/ static void lpfc_register_new_vport(struct lpfc_hba *phba, struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) @@ -4531,6 +5809,26 @@ mbox_err_exit: return; } +/** + * lpfc_cmpl_els_fdisc: Completion function for fdisc iocb command. + * @phba: pointer to lpfc hba data structure. + * @cmdiocb: pointer to lpfc command iocb data structure. + * @rspiocb: pointer to lpfc response iocb data structure. + * + * This routine is the completion callback function to a Fabric Discover + * (FDISC) ELS command. Since all the FDISC ELS commands are issued + * single threaded, each FDISC completion callback function will reset + * the discovery timer for all vports such that the timers will not get + * unnecessary timeout. The function checks the FDISC IOCB status. If error + * detected, the vport will be set to FC_VPORT_FAILED state. Otherwise,the + * vport will set to FC_VPORT_ACTIVE state. It then checks whether the DID + * assigned to the vport has been changed with the completion of the FDISC + * command. If so, both RPI (Remote Port Index) and VPI (Virtual Port Index) + * are unregistered from the HBA, and then the lpfc_register_new_vport() + * routine is invoked to register new vport with the HBA. Otherwise, the + * lpfc_do_scr_ns_plogi() routine is invoked to issue a PLOGI to the Name + * Server for State Change Request (SCR). + **/ static void lpfc_cmpl_els_fdisc(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, struct lpfc_iocbq *rspiocb) @@ -4565,58 +5863,80 @@ lpfc_cmpl_els_fdisc(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, goto out; /* FDISC failed */ lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS, - "0124 FDISC failed. (%d/%d)\n", + "0126 FDISC failed. (%d/%d)\n", irsp->ulpStatus, irsp->un.ulpWord[4]); + goto fdisc_failed; + } if (vport->fc_vport->vport_state == FC_VPORT_INITIALIZING) lpfc_vport_set_state(vport, FC_VPORT_FAILED); lpfc_nlp_put(ndlp); /* giving up on FDISC. Cancel discovery timer */ lpfc_can_disctmo(vport); - } else { - spin_lock_irq(shost->host_lock); - vport->fc_flag |= FC_FABRIC; - if (vport->phba->fc_topology == TOPOLOGY_LOOP) - vport->fc_flag |= FC_PUBLIC_LOOP; - spin_unlock_irq(shost->host_lock); + spin_lock_irq(shost->host_lock); + vport->fc_flag |= FC_FABRIC; + if (vport->phba->fc_topology == TOPOLOGY_LOOP) + vport->fc_flag |= FC_PUBLIC_LOOP; + spin_unlock_irq(shost->host_lock); - vport->fc_myDID = irsp->un.ulpWord[4] & Mask_DID; - lpfc_vport_set_state(vport, FC_VPORT_ACTIVE); - if ((vport->fc_prevDID != vport->fc_myDID) && - !(vport->fc_flag & FC_VPORT_NEEDS_REG_VPI)) { - /* If our NportID changed, we need to ensure all - * remaining NPORTs get unreg_login'ed so we can - * issue unreg_vpi. - */ - list_for_each_entry_safe(np, next_np, - &vport->fc_nodes, nlp_listp) { - if (!NLP_CHK_NODE_ACT(ndlp) || - (np->nlp_state != NLP_STE_NPR_NODE) || - !(np->nlp_flag & NLP_NPR_ADISC)) - continue; - spin_lock_irq(shost->host_lock); - np->nlp_flag &= ~NLP_NPR_ADISC; - spin_unlock_irq(shost->host_lock); - lpfc_unreg_rpi(vport, np); - } - lpfc_mbx_unreg_vpi(vport); + vport->fc_myDID = irsp->un.ulpWord[4] & Mask_DID; + lpfc_vport_set_state(vport, FC_VPORT_ACTIVE); + if ((vport->fc_prevDID != vport->fc_myDID) && + !(vport->fc_flag & FC_VPORT_NEEDS_REG_VPI)) { + /* If our NportID changed, we need to ensure all + * remaining NPORTs get unreg_login'ed so we can + * issue unreg_vpi. + */ + list_for_each_entry_safe(np, next_np, + &vport->fc_nodes, nlp_listp) { + if (!NLP_CHK_NODE_ACT(ndlp) || + (np->nlp_state != NLP_STE_NPR_NODE) || + !(np->nlp_flag & NLP_NPR_ADISC)) + continue; spin_lock_irq(shost->host_lock); - vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI; + np->nlp_flag &= ~NLP_NPR_ADISC; spin_unlock_irq(shost->host_lock); + lpfc_unreg_rpi(vport, np); } - - if (vport->fc_flag & FC_VPORT_NEEDS_REG_VPI) - lpfc_register_new_vport(phba, vport, ndlp); - else - lpfc_do_scr_ns_plogi(phba, vport); - - /* Unconditionaly kick off releasing fabric node for vports */ - lpfc_nlp_put(ndlp); + lpfc_mbx_unreg_vpi(vport); + spin_lock_irq(shost->host_lock); + vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI; + spin_unlock_irq(shost->host_lock); } + if (vport->fc_flag & FC_VPORT_NEEDS_REG_VPI) + lpfc_register_new_vport(phba, vport, ndlp); + else + lpfc_do_scr_ns_plogi(phba, vport); + goto out; +fdisc_failed: + lpfc_vport_set_state(vport, FC_VPORT_FAILED); + /* Cancel discovery timer */ + lpfc_can_disctmo(vport); + lpfc_nlp_put(ndlp); out: lpfc_els_free_iocb(phba, cmdiocb); } +/** + * lpfc_issue_els_fdisc: Issue a fdisc iocb command. + * @vport: pointer to a virtual N_Port data structure. + * @ndlp: pointer to a node-list data structure. + * @retry: number of retries to the command IOCB. + * + * This routine prepares and issues a Fabric Discover (FDISC) IOCB to + * a remote node (@ndlp) off a @vport. It uses the lpfc_issue_fabric_iocb() + * routine to issue the IOCB, which makes sure only one outstanding fabric + * IOCB will be sent off HBA at any given time. + * + * Note that, in lpfc_prep_els_iocb() routine, the reference count of ndlp + * will be incremented by 1 for holding the ndlp and the reference to ndlp + * will be stored into the context1 field of the IOCB for the completion + * callback function to the FDISC ELS command. + * + * Return code + * 0 - Successfully issued fdisc iocb command + * 1 - Failed to issue fdisc iocb command + **/ static int lpfc_issue_els_fdisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, uint8_t retry) @@ -4691,6 +6011,20 @@ lpfc_issue_els_fdisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, return 0; } +/** + * lpfc_cmpl_els_npiv_logo: Completion function with vport logo. + * @phba: pointer to lpfc hba data structure. + * @cmdiocb: pointer to lpfc command iocb data structure. + * @rspiocb: pointer to lpfc response iocb data structure. + * + * This routine is the completion callback function to the issuing of a LOGO + * ELS command off a vport. It frees the command IOCB and then decrement the + * reference count held on ndlp for this completion function, indicating that + * the reference to the ndlp is no long needed. Note that the + * lpfc_els_free_iocb() routine decrements the ndlp reference held for this + * callback function and an additional explicit ndlp reference decrementation + * will trigger the actual release of the ndlp. + **/ static void lpfc_cmpl_els_npiv_logo(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, struct lpfc_iocbq *rspiocb) @@ -4712,6 +6046,22 @@ lpfc_cmpl_els_npiv_logo(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, lpfc_nlp_put(ndlp); } +/** + * lpfc_issue_els_npiv_logo: Issue a logo off a vport. + * @vport: pointer to a virtual N_Port data structure. + * @ndlp: pointer to a node-list data structure. + * + * This routine issues a LOGO ELS command to an @ndlp off a @vport. + * + * Note that, in lpfc_prep_els_iocb() routine, the reference count of ndlp + * will be incremented by 1 for holding the ndlp and the reference to ndlp + * will be stored into the context1 field of the IOCB for the completion + * callback function to the LOGO ELS command. + * + * Return codes + * 0 - Successfully issued logo off the @vport + * 1 - Failed to issue logo off the @vport + **/ int lpfc_issue_els_npiv_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) { @@ -4757,6 +6107,17 @@ lpfc_issue_els_npiv_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) return 0; } +/** + * lpfc_fabric_block_timeout: Handler function to the fabric block timer. + * @ptr: holder for the timer function associated data. + * + * This routine is invoked by the fabric iocb block timer after + * timeout. It posts the fabric iocb block timeout event by setting the + * WORKER_FABRIC_BLOCK_TMO bit to work port event bitmap and then invokes + * lpfc_worker_wake_up() routine to wake up the worker thread. It is for + * the worker thread to invoke the lpfc_unblock_fabric_iocbs() on the + * posted event WORKER_FABRIC_BLOCK_TMO. + **/ void lpfc_fabric_block_timeout(unsigned long ptr) { @@ -4775,6 +6136,16 @@ lpfc_fabric_block_timeout(unsigned long ptr) return; } +/** + * lpfc_resume_fabric_iocbs: Issue a fabric iocb from driver internal list. + * @phba: pointer to lpfc hba data structure. + * + * This routine issues one fabric iocb from the driver internal list to + * the HBA. It first checks whether it's ready to issue one fabric iocb to + * the HBA (whether there is no outstanding fabric iocb). If so, it shall + * remove one pending fabric iocb from the driver internal list and invokes + * lpfc_sli_issue_iocb() routine to send the fabric iocb to the HBA. + **/ static void lpfc_resume_fabric_iocbs(struct lpfc_hba *phba) { @@ -4824,6 +6195,15 @@ repeat: return; } +/** + * lpfc_unblock_fabric_iocbs: Unblock issuing fabric iocb command. + * @phba: pointer to lpfc hba data structure. + * + * This routine unblocks the issuing fabric iocb command. The function + * will clear the fabric iocb block bit and then invoke the routine + * lpfc_resume_fabric_iocbs() to issue one of the pending fabric iocb + * from the driver internal fabric iocb list. + **/ void lpfc_unblock_fabric_iocbs(struct lpfc_hba *phba) { @@ -4833,6 +6213,15 @@ lpfc_unblock_fabric_iocbs(struct lpfc_hba *phba) return; } +/** + * lpfc_block_fabric_iocbs: Block issuing fabric iocb command. + * @phba: pointer to lpfc hba data structure. + * + * This routine blocks the issuing fabric iocb for a specified amount of + * time (currently 100 ms). This is done by set the fabric iocb block bit + * and set up a timeout timer for 100ms. When the block bit is set, no more + * fabric iocb will be issued out of the HBA. + **/ static void lpfc_block_fabric_iocbs(struct lpfc_hba *phba) { @@ -4846,6 +6235,19 @@ lpfc_block_fabric_iocbs(struct lpfc_hba *phba) return; } +/** + * lpfc_cmpl_fabric_iocb: Completion callback function for fabric iocb. + * @phba: pointer to lpfc hba data structure. + * @cmdiocb: pointer to lpfc command iocb data structure. + * @rspiocb: pointer to lpfc response iocb data structure. + * + * This routine is the callback function that is put to the fabric iocb's + * callback function pointer (iocb->iocb_cmpl). The original iocb's callback + * function pointer has been stored in iocb->fabric_iocb_cmpl. This callback + * function first restores and invokes the original iocb's callback function + * and then invokes the lpfc_resume_fabric_iocbs() routine to issue the next + * fabric bound iocb from the driver internal fabric iocb list onto the wire. + **/ static void lpfc_cmpl_fabric_iocb(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, struct lpfc_iocbq *rspiocb) @@ -4892,6 +6294,30 @@ lpfc_cmpl_fabric_iocb(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, } } +/** + * lpfc_issue_fabric_iocb: Issue a fabric iocb command. + * @phba: pointer to lpfc hba data structure. + * @iocb: pointer to lpfc command iocb data structure. + * + * This routine is used as the top-level API for issuing a fabric iocb command + * such as FLOGI and FDISC. To accommodate certain switch fabric, this driver + * function makes sure that only one fabric bound iocb will be outstanding at + * any given time. As such, this function will first check to see whether there + * is already an outstanding fabric iocb on the wire. If so, it will put the + * newly issued iocb onto the driver internal fabric iocb list, waiting to be + * issued later. Otherwise, it will issue the iocb on the wire and update the + * fabric iocb count it indicate that there is one fabric iocb on the wire. + * + * Note, this implementation has a potential sending out fabric IOCBs out of + * order. The problem is caused by the construction of the "ready" boolen does + * not include the condition that the internal fabric IOCB list is empty. As + * such, it is possible a fabric IOCB issued by this routine might be "jump" + * ahead of the fabric IOCBs in the internal list. + * + * Return code + * IOCB_SUCCESS - either fabric iocb put on the list or issued successfully + * IOCB_ERROR - failed to issue fabric iocb + **/ static int lpfc_issue_fabric_iocb(struct lpfc_hba *phba, struct lpfc_iocbq *iocb) { @@ -4937,7 +6363,17 @@ lpfc_issue_fabric_iocb(struct lpfc_hba *phba, struct lpfc_iocbq *iocb) return ret; } - +/** + * lpfc_fabric_abort_vport: Abort a vport's iocbs from driver fabric iocb list. + * @vport: pointer to a virtual N_Port data structure. + * + * This routine aborts all the IOCBs associated with a @vport from the + * driver internal fabric IOCB list. The list contains fabric IOCBs to be + * issued to the ELS IOCB ring. This abort function walks the fabric IOCB + * list, removes each IOCB associated with the @vport off the list, set the + * status feild to IOSTAT_LOCAL_REJECT, and invokes the callback function + * associated with the IOCB. + **/ static void lpfc_fabric_abort_vport(struct lpfc_vport *vport) { LIST_HEAD(completions); @@ -4967,6 +6403,17 @@ static void lpfc_fabric_abort_vport(struct lpfc_vport *vport) } } +/** + * lpfc_fabric_abort_nport: Abort a ndlp's iocbs from driver fabric iocb list. + * @ndlp: pointer to a node-list data structure. + * + * This routine aborts all the IOCBs associated with an @ndlp from the + * driver internal fabric IOCB list. The list contains fabric IOCBs to be + * issued to the ELS IOCB ring. This abort function walks the fabric IOCB + * list, removes each IOCB associated with the @ndlp off the list, set the + * status feild to IOSTAT_LOCAL_REJECT, and invokes the callback function + * associated with the IOCB. + **/ void lpfc_fabric_abort_nport(struct lpfc_nodelist *ndlp) { LIST_HEAD(completions); @@ -4996,6 +6443,17 @@ void lpfc_fabric_abort_nport(struct lpfc_nodelist *ndlp) } } +/** + * lpfc_fabric_abort_hba: Abort all iocbs on driver fabric iocb list. + * @phba: pointer to lpfc hba data structure. + * + * This routine aborts all the IOCBs currently on the driver internal + * fabric IOCB list. The list contains fabric IOCBs to be issued to the ELS + * IOCB ring. This function takes the entire IOCB list off the fabric IOCB + * list, removes IOCBs off the list, set the status feild to + * IOSTAT_LOCAL_REJECT, and invokes the callback function associated with + * the IOCB. + **/ void lpfc_fabric_abort_hba(struct lpfc_hba *phba) { LIST_HEAD(completions); diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index a98d11bf357..a1a70d9ffc2 100644 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -30,6 +30,7 @@ #include <scsi/scsi_transport_fc.h> #include "lpfc_hw.h" +#include "lpfc_nl.h" #include "lpfc_disc.h" #include "lpfc_sli.h" #include "lpfc_scsi.h" @@ -88,14 +89,6 @@ lpfc_terminate_rport_io(struct fc_rport *rport) &phba->sli.ring[phba->sli.fcp_ring], ndlp->nlp_sid, 0, LPFC_CTX_TGT); } - - /* - * A device is normally blocked for rediscovery and unblocked when - * devloss timeout happens. In case a vport is removed or driver - * unloaded before devloss timeout happens, we need to unblock here. - */ - scsi_target_unblock(&rport->dev); - return; } /* @@ -215,8 +208,16 @@ lpfc_dev_loss_tmo_handler(struct lpfc_nodelist *ndlp) return; } - if (ndlp->nlp_state == NLP_STE_MAPPED_NODE) + if (ndlp->nlp_state == NLP_STE_MAPPED_NODE) { + lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY, + "0284 Devloss timeout Ignored on " + "WWPN %x:%x:%x:%x:%x:%x:%x:%x " + "NPort x%x\n", + *name, *(name+1), *(name+2), *(name+3), + *(name+4), *(name+5), *(name+6), *(name+7), + ndlp->nlp_DID); return; + } if (ndlp->nlp_type & NLP_FABRIC) { /* We will clean up these Nodes in linkup */ @@ -237,8 +238,6 @@ lpfc_dev_loss_tmo_handler(struct lpfc_nodelist *ndlp) lpfc_sli_abort_iocb(vport, &phba->sli.ring[phba->sli.fcp_ring], ndlp->nlp_sid, 0, LPFC_CTX_TGT); } - if (vport->load_flag & FC_UNLOADING) - warn_on = 0; if (warn_on) { lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY, @@ -276,6 +275,124 @@ lpfc_dev_loss_tmo_handler(struct lpfc_nodelist *ndlp) lpfc_disc_state_machine(vport, ndlp, NULL, NLP_EVT_DEVICE_RM); } +/** + * lpfc_alloc_fast_evt: Allocates data structure for posting event. + * @phba: Pointer to hba context object. + * + * This function is called from the functions which need to post + * events from interrupt context. This function allocates data + * structure required for posting event. It also keeps track of + * number of events pending and prevent event storm when there are + * too many events. + **/ +struct lpfc_fast_path_event * +lpfc_alloc_fast_evt(struct lpfc_hba *phba) { + struct lpfc_fast_path_event *ret; + + /* If there are lot of fast event do not exhaust memory due to this */ + if (atomic_read(&phba->fast_event_count) > LPFC_MAX_EVT_COUNT) + return NULL; + + ret = kzalloc(sizeof(struct lpfc_fast_path_event), + GFP_ATOMIC); + if (ret) + atomic_inc(&phba->fast_event_count); + INIT_LIST_HEAD(&ret->work_evt.evt_listp); + ret->work_evt.evt = LPFC_EVT_FASTPATH_MGMT_EVT; + return ret; +} + +/** + * lpfc_free_fast_evt: Frees event data structure. + * @phba: Pointer to hba context object. + * @evt: Event object which need to be freed. + * + * This function frees the data structure required for posting + * events. + **/ +void +lpfc_free_fast_evt(struct lpfc_hba *phba, + struct lpfc_fast_path_event *evt) { + + atomic_dec(&phba->fast_event_count); + kfree(evt); +} + +/** + * lpfc_send_fastpath_evt: Posts events generated from fast path. + * @phba: Pointer to hba context object. + * @evtp: Event data structure. + * + * This function is called from worker thread, when the interrupt + * context need to post an event. This function posts the event + * to fc transport netlink interface. + **/ +static void +lpfc_send_fastpath_evt(struct lpfc_hba *phba, + struct lpfc_work_evt *evtp) +{ + unsigned long evt_category, evt_sub_category; + struct lpfc_fast_path_event *fast_evt_data; + char *evt_data; + uint32_t evt_data_size; + struct Scsi_Host *shost; + + fast_evt_data = container_of(evtp, struct lpfc_fast_path_event, + work_evt); + + evt_category = (unsigned long) fast_evt_data->un.fabric_evt.event_type; + evt_sub_category = (unsigned long) fast_evt_data->un. + fabric_evt.subcategory; + shost = lpfc_shost_from_vport(fast_evt_data->vport); + if (evt_category == FC_REG_FABRIC_EVENT) { + if (evt_sub_category == LPFC_EVENT_FCPRDCHKERR) { + evt_data = (char *) &fast_evt_data->un.read_check_error; + evt_data_size = sizeof(fast_evt_data->un. + read_check_error); + } else if ((evt_sub_category == LPFC_EVENT_FABRIC_BUSY) || + (evt_sub_category == IOSTAT_NPORT_BSY)) { + evt_data = (char *) &fast_evt_data->un.fabric_evt; + evt_data_size = sizeof(fast_evt_data->un.fabric_evt); + } else { + lpfc_free_fast_evt(phba, fast_evt_data); + return; + } + } else if (evt_category == FC_REG_SCSI_EVENT) { + switch (evt_sub_category) { + case LPFC_EVENT_QFULL: + case LPFC_EVENT_DEVBSY: + evt_data = (char *) &fast_evt_data->un.scsi_evt; + evt_data_size = sizeof(fast_evt_data->un.scsi_evt); + break; + case LPFC_EVENT_CHECK_COND: + evt_data = (char *) &fast_evt_data->un.check_cond_evt; + evt_data_size = sizeof(fast_evt_data->un. + check_cond_evt); + break; + case LPFC_EVENT_VARQUEDEPTH: + evt_data = (char *) &fast_evt_data->un.queue_depth_evt; + evt_data_size = sizeof(fast_evt_data->un. + queue_depth_evt); + break; + default: + lpfc_free_fast_evt(phba, fast_evt_data); + return; + } + } else { + lpfc_free_fast_evt(phba, fast_evt_data); + return; + } + + fc_host_post_vendor_event(shost, + fc_get_event_number(), + evt_data_size, + evt_data, + SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_EMULEX); + + lpfc_free_fast_evt(phba, fast_evt_data); + return; +} + static void lpfc_work_list_done(struct lpfc_hba *phba) { @@ -347,6 +464,10 @@ lpfc_work_list_done(struct lpfc_hba *phba) lpfc_unblock_mgmt_io(phba); complete((struct completion *)(evtp->evt_arg2)); break; + case LPFC_EVT_FASTPATH_MGMT_EVT: + lpfc_send_fastpath_evt(phba, evtp); + free_evt = 0; + break; } if (free_evt) kfree(evtp); @@ -371,6 +492,7 @@ lpfc_work_done(struct lpfc_hba *phba) spin_unlock_irq(&phba->hbalock); if (ha_copy & HA_ERATT) + /* Handle the error attention event */ lpfc_handle_eratt(phba); if (ha_copy & HA_MBATT) @@ -378,6 +500,7 @@ lpfc_work_done(struct lpfc_hba *phba) if (ha_copy & HA_LATT) lpfc_handle_latt(phba); + vports = lpfc_create_vport_work_array(phba); if (vports != NULL) for(i = 0; i <= phba->max_vpi; i++) { @@ -1013,14 +1136,10 @@ out: } static void -lpfc_mbx_issue_link_down(struct lpfc_hba *phba) +lpfc_enable_la(struct lpfc_hba *phba) { uint32_t control; struct lpfc_sli *psli = &phba->sli; - - lpfc_linkdown(phba); - - /* turn on Link Attention interrupts - no CLEAR_LA needed */ spin_lock_irq(&phba->hbalock); psli->sli_flag |= LPFC_PROCESS_LA; control = readl(phba->HCregaddr); @@ -1030,6 +1149,15 @@ lpfc_mbx_issue_link_down(struct lpfc_hba *phba) spin_unlock_irq(&phba->hbalock); } +static void +lpfc_mbx_issue_link_down(struct lpfc_hba *phba) +{ + lpfc_linkdown(phba); + lpfc_enable_la(phba); + /* turn on Link Attention interrupts - no CLEAR_LA needed */ +} + + /* * This routine handles processing a READ_LA mailbox * command upon completion. It is setup in the LPFC_MBOXQ @@ -1077,8 +1205,12 @@ lpfc_mbx_cmpl_read_la(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) } phba->fc_eventTag = la->eventTag; + if (la->mm) + phba->sli.sli_flag |= LPFC_MENLO_MAINT; + else + phba->sli.sli_flag &= ~LPFC_MENLO_MAINT; - if (la->attType == AT_LINK_UP) { + if (la->attType == AT_LINK_UP && (!la->mm)) { phba->fc_stat.LinkUp++; if (phba->link_flag & LS_LOOPBACK_MODE) { lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT, @@ -1090,13 +1222,15 @@ lpfc_mbx_cmpl_read_la(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) } else { lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT, "1303 Link Up Event x%x received " - "Data: x%x x%x x%x x%x\n", + "Data: x%x x%x x%x x%x x%x x%x %d\n", la->eventTag, phba->fc_eventTag, la->granted_AL_PA, la->UlnkSpeed, - phba->alpa_map[0]); + phba->alpa_map[0], + la->mm, la->fa, + phba->wait_4_mlo_maint_flg); } lpfc_mbx_process_link_up(phba, la); - } else { + } else if (la->attType == AT_LINK_DOWN) { phba->fc_stat.LinkDown++; if (phba->link_flag & LS_LOOPBACK_MODE) { lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT, @@ -1109,11 +1243,46 @@ lpfc_mbx_cmpl_read_la(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) else { lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT, "1305 Link Down Event x%x received " + "Data: x%x x%x x%x x%x x%x\n", + la->eventTag, phba->fc_eventTag, + phba->pport->port_state, vport->fc_flag, + la->mm, la->fa); + } + lpfc_mbx_issue_link_down(phba); + } + if (la->mm && la->attType == AT_LINK_UP) { + if (phba->link_state != LPFC_LINK_DOWN) { + phba->fc_stat.LinkDown++; + lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT, + "1312 Link Down Event x%x received " + "Data: x%x x%x x%x\n", + la->eventTag, phba->fc_eventTag, + phba->pport->port_state, vport->fc_flag); + lpfc_mbx_issue_link_down(phba); + } else + lpfc_enable_la(phba); + + lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT, + "1310 Menlo Maint Mode Link up Event x%x rcvd " "Data: x%x x%x x%x\n", la->eventTag, phba->fc_eventTag, phba->pport->port_state, vport->fc_flag); + /* + * The cmnd that triggered this will be waiting for this + * signal. + */ + /* WAKEUP for MENLO_SET_MODE or MENLO_RESET command. */ + if (phba->wait_4_mlo_maint_flg) { + phba->wait_4_mlo_maint_flg = 0; + wake_up_interruptible(&phba->wait_4_mlo_m_q); } - lpfc_mbx_issue_link_down(phba); + } + + if (la->fa) { + if (la->mm) + lpfc_issue_clear_la(phba, vport); + lpfc_printf_log(phba, KERN_INFO, LOG_LINK_EVENT, + "1311 fa %d\n", la->fa); } lpfc_mbx_cmpl_read_la_free_mbuf: @@ -1177,7 +1346,7 @@ lpfc_mbx_cmpl_unreg_vpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) scsi_host_put(shost); } -void +int lpfc_mbx_unreg_vpi(struct lpfc_vport *vport) { struct lpfc_hba *phba = vport->phba; @@ -1186,7 +1355,7 @@ lpfc_mbx_unreg_vpi(struct lpfc_vport *vport) mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); if (!mbox) - return; + return 1; lpfc_unreg_vpi(phba, vport->vpi, mbox); mbox->vport = vport; @@ -1197,7 +1366,9 @@ lpfc_mbx_unreg_vpi(struct lpfc_vport *vport) "1800 Could not issue unreg_vpi\n"); mempool_free(mbox, phba->mbox_mem_pool); vport->unreg_vpi_cmpl = VPORT_ERROR; + return rc; } + return 0; } static void @@ -1553,6 +1724,22 @@ lpfc_nlp_state_cleanup(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, */ lpfc_register_remote_port(vport, ndlp); } + if ((new_state == NLP_STE_MAPPED_NODE) && + (vport->stat_data_enabled)) { + /* + * A new target is discovered, if there is no buffer for + * statistical data collection allocate buffer. + */ + ndlp->lat_data = kcalloc(LPFC_MAX_BUCKET_COUNT, + sizeof(struct lpfc_scsicmd_bkt), + GFP_KERNEL); + + if (!ndlp->lat_data) + lpfc_printf_vlog(vport, KERN_ERR, LOG_NODE, + "0286 lpfc_nlp_state_cleanup failed to " + "allocate statistical data buffer DID " + "0x%x\n", ndlp->nlp_DID); + } /* * if we added to Mapped list, but the remote port * registration failed or assigned a target id outside @@ -2786,7 +2973,7 @@ restart_disc: default: lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY, - "0229 Unexpected discovery timeout, " + "0273 Unexpected discovery timeout, " "vport State x%x\n", vport->port_state); break; } @@ -2940,6 +3127,8 @@ lpfc_nlp_init(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, INIT_LIST_HEAD(&ndlp->nlp_listp); kref_init(&ndlp->kref); NLP_INT_NODE_ACT(ndlp); + atomic_set(&ndlp->cmd_pending, 0); + ndlp->cmd_qdepth = LPFC_MAX_TGT_QDEPTH; lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_NODE, "node init: did:x%x", @@ -2979,8 +3168,10 @@ lpfc_nlp_release(struct kref *kref) spin_unlock_irqrestore(&phba->ndlp_lock, flags); /* free ndlp memory for final ndlp release */ - if (NLP_CHK_FREE_REQ(ndlp)) + if (NLP_CHK_FREE_REQ(ndlp)) { + kfree(ndlp->lat_data); mempool_free(ndlp, ndlp->vport->phba->nlp_mem_pool); + } } /* This routine bumps the reference count for a ndlp structure to ensure diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h index 7773b949aa7..5de5dabbbee 100644 --- a/drivers/scsi/lpfc/lpfc_hw.h +++ b/drivers/scsi/lpfc/lpfc_hw.h @@ -1107,6 +1107,8 @@ typedef struct { /* Start FireFly Register definitions */ #define PCI_VENDOR_ID_EMULEX 0x10df #define PCI_DEVICE_ID_FIREFLY 0x1ae5 +#define PCI_DEVICE_ID_PROTEUS_VF 0xe100 +#define PCI_DEVICE_ID_PROTEUS_PF 0xe180 #define PCI_DEVICE_ID_SAT_SMB 0xf011 #define PCI_DEVICE_ID_SAT_MID 0xf015 #define PCI_DEVICE_ID_RFLY 0xf095 @@ -1133,10 +1135,12 @@ typedef struct { #define PCI_DEVICE_ID_LP11000S 0xfc10 #define PCI_DEVICE_ID_LPE11000S 0xfc20 #define PCI_DEVICE_ID_SAT_S 0xfc40 +#define PCI_DEVICE_ID_PROTEUS_S 0xfc50 #define PCI_DEVICE_ID_HELIOS 0xfd00 #define PCI_DEVICE_ID_HELIOS_SCSP 0xfd11 #define PCI_DEVICE_ID_HELIOS_DCSP 0xfd12 #define PCI_DEVICE_ID_ZEPHYR 0xfe00 +#define PCI_DEVICE_ID_HORNET 0xfe05 #define PCI_DEVICE_ID_ZEPHYR_SCSP 0xfe11 #define PCI_DEVICE_ID_ZEPHYR_DCSP 0xfe12 @@ -1154,6 +1158,7 @@ typedef struct { #define ZEPHYR_JEDEC_ID 0x0577 #define VIPER_JEDEC_ID 0x4838 #define SATURN_JEDEC_ID 0x1004 +#define HORNET_JDEC_ID 0x2057706D #define JEDEC_ID_MASK 0x0FFFF000 #define JEDEC_ID_SHIFT 12 @@ -1198,6 +1203,18 @@ typedef struct { /* FireFly BIU registers */ #define HA_RXATT 0x00000008 /* Bit 3 */ #define HA_RXMASK 0x0000000f +#define HA_R0_CLR_MSK (HA_R0RE_REQ | HA_R0CE_RSP | HA_R0ATT) +#define HA_R1_CLR_MSK (HA_R1RE_REQ | HA_R1CE_RSP | HA_R1ATT) +#define HA_R2_CLR_MSK (HA_R2RE_REQ | HA_R2CE_RSP | HA_R2ATT) +#define HA_R3_CLR_MSK (HA_R3RE_REQ | HA_R3CE_RSP | HA_R3ATT) + +#define HA_R0_POS 3 +#define HA_R1_POS 7 +#define HA_R2_POS 11 +#define HA_R3_POS 15 +#define HA_LE_POS 29 +#define HA_MB_POS 30 +#define HA_ER_POS 31 /* Chip Attention Register */ #define CA_REG_OFFSET 4 /* Byte offset from register base address */ @@ -1235,7 +1252,7 @@ typedef struct { /* FireFly BIU registers */ /* Host Control Register */ -#define HC_REG_OFFSET 12 /* Word offset from register base address */ +#define HC_REG_OFFSET 12 /* Byte offset from register base address */ #define HC_MBINT_ENA 0x00000001 /* Bit 0 */ #define HC_R0INT_ENA 0x00000002 /* Bit 1 */ @@ -1248,6 +1265,19 @@ typedef struct { /* FireFly BIU registers */ #define HC_LAINT_ENA 0x20000000 /* Bit 29 */ #define HC_ERINT_ENA 0x80000000 /* Bit 31 */ +/* Message Signaled Interrupt eXtension (MSI-X) message identifiers */ +#define MSIX_DFLT_ID 0 +#define MSIX_RNG0_ID 0 +#define MSIX_RNG1_ID 1 +#define MSIX_RNG2_ID 2 +#define MSIX_RNG3_ID 3 + +#define MSIX_LINK_ID 4 +#define MSIX_MBOX_ID 5 + +#define MSIX_SPARE0_ID 6 +#define MSIX_SPARE1_ID 7 + /* Mailbox Commands */ #define MBX_SHUTDOWN 0x00 /* terminate testing */ #define MBX_LOAD_SM 0x01 @@ -1285,10 +1315,14 @@ typedef struct { /* FireFly BIU registers */ #define MBX_KILL_BOARD 0x24 #define MBX_CONFIG_FARP 0x25 #define MBX_BEACON 0x2A +#define MBX_CONFIG_MSI 0x30 #define MBX_HEARTBEAT 0x31 #define MBX_WRITE_VPARMS 0x32 #define MBX_ASYNCEVT_ENABLE 0x33 +#define MBX_PORT_CAPABILITIES 0x3B +#define MBX_PORT_IOV_CONTROL 0x3C + #define MBX_CONFIG_HBQ 0x7C #define MBX_LOAD_AREA 0x81 #define MBX_RUN_BIU_DIAG64 0x84 @@ -1474,24 +1508,18 @@ struct ulp_bde64 { /* SLI-2 */ uint32_t bdeFlags:8; /* BDE Flags 0 IS A SUPPORTED VALUE !! */ #endif - -#define BUFF_USE_RSVD 0x01 /* bdeFlags */ -#define BUFF_USE_INTRPT 0x02 /* Not Implemented with LP6000 */ -#define BUFF_USE_CMND 0x04 /* Optional, 1=cmd/rsp 0=data buffer */ -#define BUFF_USE_RCV 0x08 /* "" "", 1=rcv buffer, 0=xmit - buffer */ -#define BUFF_TYPE_32BIT 0x10 /* "" "", 1=32 bit addr 0=64 bit - addr */ -#define BUFF_TYPE_SPECIAL 0x20 /* Not Implemented with LP6000 */ -#define BUFF_TYPE_BDL 0x40 /* Optional, may be set in BDL */ -#define BUFF_TYPE_INVALID 0x80 /* "" "" */ +#define BUFF_TYPE_BDE_64 0x00 /* BDE (Host_resident) */ +#define BUFF_TYPE_BDE_IMMED 0x01 /* Immediate Data BDE */ +#define BUFF_TYPE_BDE_64P 0x02 /* BDE (Port-resident) */ +#define BUFF_TYPE_BDE_64I 0x08 /* Input BDE (Host-resident) */ +#define BUFF_TYPE_BDE_64IP 0x0A /* Input BDE (Port-resident) */ +#define BUFF_TYPE_BLP_64 0x40 /* BLP (Host-resident) */ +#define BUFF_TYPE_BLP_64P 0x42 /* BLP (Port-resident) */ } f; } tus; uint32_t addrLow; uint32_t addrHigh; }; -#define BDE64_SIZE_WORD 0 -#define BPL64_SIZE_WORD 0x40 typedef struct ULP_BDL { /* SLI-2 */ #ifdef __BIG_ENDIAN_BITFIELD @@ -2201,7 +2229,10 @@ typedef struct { typedef struct { uint32_t eventTag; /* Event tag */ #ifdef __BIG_ENDIAN_BITFIELD - uint32_t rsvd1:22; + uint32_t rsvd1:19; + uint32_t fa:1; + uint32_t mm:1; /* Menlo Maintenance mode enabled */ + uint32_t rx:1; uint32_t pb:1; uint32_t il:1; uint32_t attType:8; @@ -2209,7 +2240,10 @@ typedef struct { uint32_t attType:8; uint32_t il:1; uint32_t pb:1; - uint32_t rsvd1:22; + uint32_t rx:1; + uint32_t mm:1; + uint32_t fa:1; + uint32_t rsvd1:19; #endif #define AT_RESERVED 0x00 /* Reserved - attType */ @@ -2230,6 +2264,7 @@ typedef struct { #define TOPOLOGY_PT_PT 0x01 /* Topology is pt-pt / pt-fabric */ #define TOPOLOGY_LOOP 0x02 /* Topology is FC-AL */ +#define TOPOLOGY_LNK_MENLO_MAINTENANCE 0x05 /* maint mode zephtr to menlo */ union { struct ulp_bde lilpBde; /* This BDE points to a 128 byte buffer @@ -2324,6 +2359,36 @@ typedef struct { #define DMP_RSP_OFFSET 0x14 /* word 5 contains first word of rsp */ #define DMP_RSP_SIZE 0x6C /* maximum of 27 words of rsp data */ +/* Structure for MB Command UPDATE_CFG (0x1B) */ + +struct update_cfg_var { +#ifdef __BIG_ENDIAN_BITFIELD + uint32_t rsvd2:16; + uint32_t type:8; + uint32_t rsvd:1; + uint32_t ra:1; + uint32_t co:1; + uint32_t cv:1; + uint32_t req:4; + uint32_t entry_length:16; + uint32_t region_id:16; +#else /* __LITTLE_ENDIAN_BITFIELD */ + uint32_t req:4; + uint32_t cv:1; + uint32_t co:1; + uint32_t ra:1; + uint32_t rsvd:1; + uint32_t type:8; + uint32_t rsvd2:16; + uint32_t region_id:16; + uint32_t entry_length:16; +#endif + + uint32_t resp_info; + uint32_t byte_cnt; + uint32_t data_offset; +}; + struct hbq_mask { #ifdef __BIG_ENDIAN_BITFIELD uint8_t tmatch; @@ -2560,6 +2625,40 @@ typedef struct { } CONFIG_PORT_VAR; +/* Structure for MB Command CONFIG_MSI (0x30) */ +struct config_msi_var { +#ifdef __BIG_ENDIAN_BITFIELD + uint32_t dfltMsgNum:8; /* Default message number */ + uint32_t rsvd1:11; /* Reserved */ + uint32_t NID:5; /* Number of secondary attention IDs */ + uint32_t rsvd2:5; /* Reserved */ + uint32_t dfltPresent:1; /* Default message number present */ + uint32_t addFlag:1; /* Add association flag */ + uint32_t reportFlag:1; /* Report association flag */ +#else /* __LITTLE_ENDIAN_BITFIELD */ + uint32_t reportFlag:1; /* Report association flag */ + uint32_t addFlag:1; /* Add association flag */ + uint32_t dfltPresent:1; /* Default message number present */ + uint32_t rsvd2:5; /* Reserved */ + uint32_t NID:5; /* Number of secondary attention IDs */ + uint32_t rsvd1:11; /* Reserved */ + uint32_t dfltMsgNum:8; /* Default message number */ +#endif + uint32_t attentionConditions[2]; + uint8_t attentionId[16]; + uint8_t messageNumberByHA[64]; + uint8_t messageNumberByID[16]; + uint32_t autoClearHA[2]; +#ifdef __BIG_ENDIAN_BITFIELD + uint32_t rsvd3:16; + uint32_t autoClearID:16; +#else /* __LITTLE_ENDIAN_BITFIELD */ + uint32_t autoClearID:16; + uint32_t rsvd3:16; +#endif + uint32_t rsvd4; +}; + /* SLI-2 Port Control Block */ /* SLIM POINTER */ @@ -2678,10 +2777,12 @@ typedef union { * NEW_FEATURE */ struct config_hbq_var varCfgHbq;/* cmd = 0x7c (CONFIG_HBQ) */ + struct update_cfg_var varUpdateCfg; /* cmd = 0x1B (UPDATE_CFG)*/ CONFIG_PORT_VAR varCfgPort; /* cmd = 0x88 (CONFIG_PORT) */ REG_VPI_VAR varRegVpi; /* cmd = 0x96 (REG_VPI) */ UNREG_VPI_VAR varUnregVpi; /* cmd = 0x97 (UNREG_VPI) */ ASYNCEVT_ENABLE_VAR varCfgAsyncEvent; /*cmd = x33 (CONFIG_ASYNC) */ + struct config_msi_var varCfgMSI;/* cmd = x30 (CONFIG_MSI) */ } MAILVARIANTS; /* @@ -2715,11 +2816,19 @@ struct sli3_pgp { uint32_t hbq_get[16]; }; -typedef union { - struct sli2_desc s2; - struct sli3_desc s3; - struct sli3_pgp s3_pgp; -} SLI_VAR; +struct sli3_inb_pgp { + uint32_t ha_copy; + uint32_t counter; + struct lpfc_pgp port[MAX_RINGS]; + uint32_t hbq_get[16]; +}; + +union sli_var { + struct sli2_desc s2; + struct sli3_desc s3; + struct sli3_pgp s3_pgp; + struct sli3_inb_pgp s3_inb_pgp; +}; typedef struct { #ifdef __BIG_ENDIAN_BITFIELD @@ -2737,7 +2846,7 @@ typedef struct { #endif MAILVARIANTS un; - SLI_VAR us; + union sli_var us; } MAILBOX_t; /* @@ -3105,6 +3214,27 @@ struct que_xri64cx_ext_fields { struct lpfc_hbq_entry buff[5]; }; +#define LPFC_EXT_DATA_BDE_COUNT 3 +struct fcp_irw_ext { + uint32_t io_tag64_low; + uint32_t io_tag64_high; +#ifdef __BIG_ENDIAN_BITFIELD + uint8_t reserved1; + uint8_t reserved2; + uint8_t reserved3; + uint8_t ebde_count; +#else /* __LITTLE_ENDIAN */ + uint8_t ebde_count; + uint8_t reserved3; + uint8_t reserved2; + uint8_t reserved1; +#endif + uint32_t reserved4; + struct ulp_bde64 rbde; /* response bde */ + struct ulp_bde64 dbde[LPFC_EXT_DATA_BDE_COUNT]; /* data BDE or BPL */ + uint8_t icd[32]; /* immediate command data (32 bytes) */ +}; + typedef struct _IOCB { /* IOCB structure */ union { GENERIC_RSP grsp; /* Generic response */ @@ -3190,7 +3320,7 @@ typedef struct _IOCB { /* IOCB structure */ /* words 8-31 used for que_xri_cx iocb */ struct que_xri64cx_ext_fields que_xri64cx_ext_words; - + struct fcp_irw_ext fcp_ext; uint32_t sli3Words[24]; /* 96 extra bytes for SLI-3 */ } unsli3; @@ -3292,3 +3422,10 @@ lpfc_error_lost_link(IOCB_t *iocbp) iocbp->un.ulpWord[4] == IOERR_LINK_DOWN || iocbp->un.ulpWord[4] == IOERR_SLI_DOWN)); } + +#define MENLO_TRANSPORT_TYPE 0xfe +#define MENLO_CONTEXT 0 +#define MENLO_PU 3 +#define MENLO_TIMEOUT 30 +#define SETVAR_MLOMNT 0x103107 +#define SETVAR_MLORST 0x103007 diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index d51a2a4b43e..909be3301bb 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -36,6 +36,7 @@ #include "lpfc_hw.h" #include "lpfc_sli.h" +#include "lpfc_nl.h" #include "lpfc_disc.h" #include "lpfc_scsi.h" #include "lpfc.h" @@ -52,17 +53,20 @@ static struct scsi_transport_template *lpfc_transport_template = NULL; static struct scsi_transport_template *lpfc_vport_transport_template = NULL; static DEFINE_IDR(lpfc_hba_index); -/************************************************************************/ -/* */ -/* lpfc_config_port_prep */ -/* This routine will do LPFC initialization prior to the */ -/* CONFIG_PORT mailbox command. This will be initialized */ -/* as a SLI layer callback routine. */ -/* This routine returns 0 on success or -ERESTART if it wants */ -/* the SLI layer to reset the HBA and try again. Any */ -/* other return value indicates an error. */ -/* */ -/************************************************************************/ +/** + * lpfc_config_port_prep: Perform lpfc initialization prior to config port. + * @phba: pointer to lpfc hba data structure. + * + * This routine will do LPFC initialization prior to issuing the CONFIG_PORT + * mailbox command. It retrieves the revision information from the HBA and + * collects the Vital Product Data (VPD) about the HBA for preparing the + * configuration of the HBA. + * + * Return codes: + * 0 - success. + * -ERESTART - requests the SLI layer to reset the HBA and try again. + * Any other value - indicates an error. + **/ int lpfc_config_port_prep(struct lpfc_hba *phba) { @@ -180,12 +184,9 @@ lpfc_config_port_prep(struct lpfc_hba *phba) sizeof (phba->RandomData)); /* Get adapter VPD information */ - pmb->context2 = kmalloc(DMP_RSP_SIZE, GFP_KERNEL); - if (!pmb->context2) - goto out_free_mbox; lpfc_vpd_data = kmalloc(DMP_VPD_SIZE, GFP_KERNEL); if (!lpfc_vpd_data) - goto out_free_context2; + goto out_free_mbox; do { lpfc_dump_mem(phba, pmb, offset); @@ -200,21 +201,29 @@ lpfc_config_port_prep(struct lpfc_hba *phba) } if (mb->un.varDmp.word_cnt > DMP_VPD_SIZE - offset) mb->un.varDmp.word_cnt = DMP_VPD_SIZE - offset; - lpfc_sli_pcimem_bcopy(pmb->context2, lpfc_vpd_data + offset, + lpfc_sli_pcimem_bcopy(((uint8_t *)mb) + DMP_RSP_OFFSET, + lpfc_vpd_data + offset, mb->un.varDmp.word_cnt); offset += mb->un.varDmp.word_cnt; } while (mb->un.varDmp.word_cnt && offset < DMP_VPD_SIZE); lpfc_parse_vpd(phba, lpfc_vpd_data, offset); kfree(lpfc_vpd_data); -out_free_context2: - kfree(pmb->context2); out_free_mbox: mempool_free(pmb, phba->mbox_mem_pool); return 0; } -/* Completion handler for config async event mailbox command. */ +/** + * lpfc_config_async_cmpl: Completion handler for config async event mbox cmd. + * @phba: pointer to lpfc hba data structure. + * @pmboxq: pointer to the driver internal queue element for mailbox command. + * + * This is the completion handler for driver's configuring asynchronous event + * mailbox command to the device. If the mailbox command returns successfully, + * it will set internal async event support flag to 1; otherwise, it will + * set internal async event support flag to 0. + **/ static void lpfc_config_async_cmpl(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq) { @@ -226,16 +235,19 @@ lpfc_config_async_cmpl(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq) return; } -/************************************************************************/ -/* */ -/* lpfc_config_port_post */ -/* This routine will do LPFC initialization after the */ -/* CONFIG_PORT mailbox command. This will be initialized */ -/* as a SLI layer callback routine. */ -/* This routine returns 0 on success. Any other return value */ -/* indicates an error. */ -/* */ -/************************************************************************/ +/** + * lpfc_config_port_post: Perform lpfc initialization after config port. + * @phba: pointer to lpfc hba data structure. + * + * This routine will do LPFC initialization after the CONFIG_PORT mailbox + * command call. It performs all internal resource and state setups on the + * port: post IOCB buffers, enable appropriate host interrupt attentions, + * ELS ring timers, etc. + * + * Return codes + * 0 - success. + * Any other value - error. + **/ int lpfc_config_port_post(struct lpfc_hba *phba) { @@ -378,6 +390,29 @@ lpfc_config_port_post(struct lpfc_hba *phba) if (phba->sli_rev != 3) lpfc_post_rcv_buf(phba); + /* + * Configure HBA MSI-X attention conditions to messages if MSI-X mode + */ + if (phba->intr_type == MSIX) { + rc = lpfc_config_msi(phba, pmb); + if (rc) { + mempool_free(pmb, phba->mbox_mem_pool); + return -EIO; + } + rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL); + if (rc != MBX_SUCCESS) { + lpfc_printf_log(phba, KERN_ERR, LOG_MBOX, + "0352 Config MSI mailbox command " + "failed, mbxCmd x%x, mbxStatus x%x\n", + pmb->mb.mbxCommand, pmb->mb.mbxStatus); + mempool_free(pmb, phba->mbox_mem_pool); + return -EIO; + } + } + + /* Initialize ERATT handling flag */ + phba->hba_flag &= ~HBA_ERATT_HANDLED; + /* Enable appropriate host interrupts */ spin_lock_irq(&phba->hbalock); status = readl(phba->HCregaddr); @@ -393,26 +428,26 @@ lpfc_config_port_post(struct lpfc_hba *phba) if ((phba->cfg_poll & ENABLE_FCP_RING_POLLING) && (phba->cfg_poll & DISABLE_FCP_RING_INT)) - status &= ~(HC_R0INT_ENA << LPFC_FCP_RING); + status &= ~(HC_R0INT_ENA); writel(status, phba->HCregaddr); readl(phba->HCregaddr); /* flush */ spin_unlock_irq(&phba->hbalock); - /* - * Setup the ring 0 (els) timeout handler - */ - timeout = phba->fc_ratov << 1; + /* Set up ring-0 (ELS) timer */ + timeout = phba->fc_ratov * 2; mod_timer(&vport->els_tmofunc, jiffies + HZ * timeout); + /* Set up heart beat (HB) timer */ mod_timer(&phba->hb_tmofunc, jiffies + HZ * LPFC_HB_MBOX_INTERVAL); phba->hb_outstanding = 0; phba->last_completion_time = jiffies; + /* Set up error attention (ERATT) polling timer */ + mod_timer(&phba->eratt_poll, jiffies + HZ * LPFC_ERATT_POLL_INTERVAL); lpfc_init_link(phba, pmb, phba->cfg_topology, phba->cfg_link_speed); pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl; - pmb->vport = vport; - rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT); lpfc_set_loopback_flag(phba); + rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT); if (rc != MBX_SUCCESS) { lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "0454 Adapter failed to init, mbxCmd x%x " @@ -447,19 +482,20 @@ lpfc_config_port_post(struct lpfc_hba *phba) rc); mempool_free(pmb, phba->mbox_mem_pool); } - return (0); + return 0; } -/************************************************************************/ -/* */ -/* lpfc_hba_down_prep */ -/* This routine will do LPFC uninitialization before the */ -/* HBA is reset when bringing down the SLI Layer. This will be */ -/* initialized as a SLI layer callback routine. */ -/* This routine returns 0 on success. Any other return value */ -/* indicates an error. */ -/* */ -/************************************************************************/ +/** + * lpfc_hba_down_prep: Perform lpfc uninitialization prior to HBA reset. + * @phba: pointer to lpfc HBA data structure. + * + * This routine will do LPFC uninitialization before the HBA is reset when + * bringing down the SLI Layer. + * + * Return codes + * 0 - success. + * Any other value - error. + **/ int lpfc_hba_down_prep(struct lpfc_hba *phba) { @@ -481,15 +517,17 @@ lpfc_hba_down_prep(struct lpfc_hba *phba) return 0; } -/************************************************************************/ -/* */ -/* lpfc_hba_down_post */ -/* This routine will do uninitialization after the HBA is reset */ -/* when bringing down the SLI Layer. */ -/* This routine returns 0 on success. Any other return value */ -/* indicates an error. */ -/* */ -/************************************************************************/ +/** + * lpfc_hba_down_post: Perform lpfc uninitialization after HBA reset. + * @phba: pointer to lpfc HBA data structure. + * + * This routine will do uninitialization after the HBA is reset when bring + * down the SLI Layer. + * + * Return codes + * 0 - sucess. + * Any other value - error. + **/ int lpfc_hba_down_post(struct lpfc_hba *phba) { @@ -548,7 +586,18 @@ lpfc_hba_down_post(struct lpfc_hba *phba) return 0; } -/* HBA heart beat timeout handler */ +/** + * lpfc_hb_timeout: The HBA-timer timeout handler. + * @ptr: unsigned long holds the pointer to lpfc hba data structure. + * + * This is the HBA-timer timeout handler registered to the lpfc driver. When + * this timer fires, a HBA timeout event shall be posted to the lpfc driver + * work-port-events bitmap and the worker thread is notified. This timeout + * event will be used by the worker thread to invoke the actual timeout + * handler routine, lpfc_hb_timeout_handler. Any periodical operations will + * be performed in the timeout handler and the HBA timeout event bit shall + * be cleared by the worker thread after it has taken the event bitmap out. + **/ static void lpfc_hb_timeout(unsigned long ptr) { @@ -557,17 +606,36 @@ lpfc_hb_timeout(unsigned long ptr) unsigned long iflag; phba = (struct lpfc_hba *)ptr; + + /* Check for heart beat timeout conditions */ spin_lock_irqsave(&phba->pport->work_port_lock, iflag); tmo_posted = phba->pport->work_port_events & WORKER_HB_TMO; if (!tmo_posted) phba->pport->work_port_events |= WORKER_HB_TMO; spin_unlock_irqrestore(&phba->pport->work_port_lock, iflag); + /* Tell the worker thread there is work to do */ if (!tmo_posted) lpfc_worker_wake_up(phba); return; } +/** + * lpfc_hb_mbox_cmpl: The lpfc heart-beat mailbox command callback function. + * @phba: pointer to lpfc hba data structure. + * @pmboxq: pointer to the driver internal queue element for mailbox command. + * + * This is the callback function to the lpfc heart-beat mailbox command. + * If configured, the lpfc driver issues the heart-beat mailbox command to + * the HBA every LPFC_HB_MBOX_INTERVAL (current 5) seconds. At the time the + * heart-beat mailbox command is issued, the driver shall set up heart-beat + * timeout timer to LPFC_HB_MBOX_TIMEOUT (current 30) seconds and marks + * heart-beat outstanding state. Once the mailbox command comes back and + * no error conditions detected, the heart-beat mailbox command timer is + * reset to LPFC_HB_MBOX_INTERVAL seconds and the heart-beat outstanding + * state is cleared for the next heart-beat. If the timer expired with the + * heart-beat outstanding state set, the driver will put the HBA offline. + **/ static void lpfc_hb_mbox_cmpl(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq) { @@ -577,6 +645,7 @@ lpfc_hb_mbox_cmpl(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq) phba->hb_outstanding = 0; spin_unlock_irqrestore(&phba->hbalock, drvr_flag); + /* Check and reset heart-beat timer is necessary */ mempool_free(pmboxq, phba->mbox_mem_pool); if (!(phba->pport->fc_flag & FC_OFFLINE_MODE) && !(phba->link_state == LPFC_HBA_ERROR) && @@ -586,6 +655,22 @@ lpfc_hb_mbox_cmpl(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq) return; } +/** + * lpfc_hb_timeout_handler: The HBA-timer timeout handler. + * @phba: pointer to lpfc hba data structure. + * + * This is the actual HBA-timer timeout handler to be invoked by the worker + * thread whenever the HBA timer fired and HBA-timeout event posted. This + * handler performs any periodic operations needed for the device. If such + * periodic event has already been attended to either in the interrupt handler + * or by processing slow-ring or fast-ring events within the HBA-timer + * timeout window (LPFC_HB_MBOX_INTERVAL), this handler just simply resets + * the timer for the next timeout period. If lpfc heart-beat mailbox command + * is configured and there is no heart-beat mailbox command outstanding, a + * heart-beat mailbox is issued and timer set properly. Otherwise, if there + * has been a heart-beat mailbox command outstanding, the HBA shall be put + * to offline. + **/ void lpfc_hb_timeout_handler(struct lpfc_hba *phba) { @@ -684,6 +769,13 @@ lpfc_hb_timeout_handler(struct lpfc_hba *phba) } } +/** + * lpfc_offline_eratt: Bring lpfc offline on hardware error attention. + * @phba: pointer to lpfc hba data structure. + * + * This routine is called to bring the HBA offline when HBA hardware error + * other than Port Error 6 has been detected. + **/ static void lpfc_offline_eratt(struct lpfc_hba *phba) { @@ -704,14 +796,16 @@ lpfc_offline_eratt(struct lpfc_hba *phba) return; } -/************************************************************************/ -/* */ -/* lpfc_handle_eratt */ -/* This routine will handle processing a Host Attention */ -/* Error Status event. This will be initialized */ -/* as a SLI layer callback routine. */ -/* */ -/************************************************************************/ +/** + * lpfc_handle_eratt: The HBA hardware error handler. + * @phba: pointer to lpfc hba data structure. + * + * This routine is invoked to handle the following HBA hardware error + * conditions: + * 1 - HBA error attention interrupt + * 2 - DMA ring index out of range + * 3 - Mailbox command came back as unknown + **/ void lpfc_handle_eratt(struct lpfc_hba *phba) { @@ -722,6 +816,7 @@ lpfc_handle_eratt(struct lpfc_hba *phba) unsigned long temperature; struct temp_event temp_event_data; struct Scsi_Host *shost; + struct lpfc_board_event_header board_event; /* If the pci channel is offline, ignore possible errors, * since we cannot communicate with the pci card anyway. */ @@ -731,6 +826,16 @@ lpfc_handle_eratt(struct lpfc_hba *phba) if (!phba->cfg_enable_hba_reset) return; + /* Send an internal error event to mgmt application */ + board_event.event_type = FC_REG_BOARD_EVENT; + board_event.subcategory = LPFC_EVENT_PORTINTERR; + shost = lpfc_shost_from_vport(phba->pport); + fc_host_post_vendor_event(shost, fc_get_event_number(), + sizeof(board_event), + (char *) &board_event, + SCSI_NL_VID_TYPE_PCI + | PCI_VENDOR_ID_EMULEX); + if (phba->work_hs & HS_FFER6) { /* Re-establishing Link */ lpfc_printf_log(phba, KERN_INFO, LOG_LINK_EVENT, @@ -771,7 +876,7 @@ lpfc_handle_eratt(struct lpfc_hba *phba) temp_event_data.data = (uint32_t)temperature; lpfc_printf_log(phba, KERN_ERR, LOG_INIT, - "0459 Adapter maximum temperature exceeded " + "0406 Adapter maximum temperature exceeded " "(%ld), taking this port offline " "Data: x%x x%x x%x\n", temperature, phba->work_hs, @@ -791,8 +896,8 @@ lpfc_handle_eratt(struct lpfc_hba *phba) } else { /* The if clause above forces this code path when the status - * failure is a value other than FFER6. Do not call the offline - * twice. This is the adapter hardware error path. + * failure is a value other than FFER6. Do not call the offline + * twice. This is the adapter hardware error path. */ lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "0457 Adapter Hardware Error " @@ -808,16 +913,16 @@ lpfc_handle_eratt(struct lpfc_hba *phba) lpfc_offline_eratt(phba); } + return; } -/************************************************************************/ -/* */ -/* lpfc_handle_latt */ -/* This routine will handle processing a Host Attention */ -/* Link Status event. This will be initialized */ -/* as a SLI layer callback routine. */ -/* */ -/************************************************************************/ +/** + * lpfc_handle_latt: The HBA link event handler. + * @phba: pointer to lpfc hba data structure. + * + * This routine is invoked from the worker thread to handle a HBA host + * attention link event. + **/ void lpfc_handle_latt(struct lpfc_hba *phba) { @@ -898,12 +1003,20 @@ lpfc_handle_latt_err_exit: return; } -/************************************************************************/ -/* */ -/* lpfc_parse_vpd */ -/* This routine will parse the VPD data */ -/* */ -/************************************************************************/ +/** + * lpfc_parse_vpd: Parse VPD (Vital Product Data). + * @phba: pointer to lpfc hba data structure. + * @vpd: pointer to the vital product data. + * @len: length of the vital product data in bytes. + * + * This routine parses the Vital Product Data (VPD). The VPD is treated as + * an array of characters. In this routine, the ModelName, ProgramType, and + * ModelDesc, etc. fields of the phba data structure will be populated. + * + * Return codes + * 0 - pointer to the VPD passed in is NULL + * 1 - success + **/ static int lpfc_parse_vpd(struct lpfc_hba *phba, uint8_t *vpd, int len) { @@ -1040,12 +1153,25 @@ lpfc_parse_vpd(struct lpfc_hba *phba, uint8_t *vpd, int len) return(1); } +/** + * lpfc_get_hba_model_desc: Retrieve HBA device model name and description. + * @phba: pointer to lpfc hba data structure. + * @mdp: pointer to the data structure to hold the derived model name. + * @descp: pointer to the data structure to hold the derived description. + * + * This routine retrieves HBA's description based on its registered PCI device + * ID. The @descp passed into this function points to an array of 256 chars. It + * shall be returned with the model name, maximum speed, and the host bus type. + * The @mdp passed into this function points to an array of 80 chars. When the + * function returns, the @mdp will be filled with the model name. + **/ static void lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp) { lpfc_vpd_t *vp; uint16_t dev_id = phba->pcidev->device; int max_speed; + int GE = 0; struct { char * name; int max_speed; @@ -1177,6 +1303,19 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp) case PCI_DEVICE_ID_SAT_S: m = (typeof(m)){"LPe12000-S", max_speed, "PCIe"}; break; + case PCI_DEVICE_ID_HORNET: + m = (typeof(m)){"LP21000", max_speed, "PCIe"}; + GE = 1; + break; + case PCI_DEVICE_ID_PROTEUS_VF: + m = (typeof(m)) {"LPev12000", max_speed, "PCIe IOV"}; + break; + case PCI_DEVICE_ID_PROTEUS_PF: + m = (typeof(m)) {"LPev12000", max_speed, "PCIe IOV"}; + break; + case PCI_DEVICE_ID_PROTEUS_S: + m = (typeof(m)) {"LPemv12002-S", max_speed, "PCIe IOV"}; + break; default: m = (typeof(m)){ NULL }; break; @@ -1186,18 +1325,25 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp) snprintf(mdp, 79,"%s", m.name); if (descp && descp[0] == '\0') snprintf(descp, 255, - "Emulex %s %dGb %s Fibre Channel Adapter", - m.name, m.max_speed, m.bus); + "Emulex %s %d%s %s %s", + m.name, m.max_speed, + (GE) ? "GE" : "Gb", + m.bus, + (GE) ? "FCoE Adapter" : "Fibre Channel Adapter"); } -/**************************************************/ -/* lpfc_post_buffer */ -/* */ -/* This routine will post count buffers to the */ -/* ring with the QUE_RING_BUF_CN command. This */ -/* allows 3 buffers / command to be posted. */ -/* Returns the number of buffers NOT posted. */ -/**************************************************/ +/** + * lpfc_post_buffer: Post IOCB(s) with DMA buffer descriptor(s) to a IOCB ring. + * @phba: pointer to lpfc hba data structure. + * @pring: pointer to a IOCB ring. + * @cnt: the number of IOCBs to be posted to the IOCB ring. + * + * This routine posts a given number of IOCBs with the associated DMA buffer + * descriptors specified by the cnt argument to the given IOCB ring. + * + * Return codes + * The number of IOCBs NOT able to be posted to the IOCB ring. + **/ int lpfc_post_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, int cnt) { @@ -1287,12 +1433,17 @@ lpfc_post_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, int cnt) return 0; } -/************************************************************************/ -/* */ -/* lpfc_post_rcv_buf */ -/* This routine post initial rcv buffers to the configured rings */ -/* */ -/************************************************************************/ +/** + * lpfc_post_rcv_buf: Post the initial receive IOCB buffers to ELS ring. + * @phba: pointer to lpfc hba data structure. + * + * This routine posts initial receive IOCB buffers to the ELS ring. The + * current number of initial IOCB buffers specified by LPFC_BUF_RING0 is + * set to 64 IOCBs. + * + * Return codes + * 0 - success (currently always success) + **/ static int lpfc_post_rcv_buf(struct lpfc_hba *phba) { @@ -1307,11 +1458,13 @@ lpfc_post_rcv_buf(struct lpfc_hba *phba) #define S(N,V) (((V)<<(N))|((V)>>(32-(N)))) -/************************************************************************/ -/* */ -/* lpfc_sha_init */ -/* */ -/************************************************************************/ +/** + * lpfc_sha_init: Set up initial array of hash table entries. + * @HashResultPointer: pointer to an array as hash table. + * + * This routine sets up the initial values to the array of hash table entries + * for the LC HBAs. + **/ static void lpfc_sha_init(uint32_t * HashResultPointer) { @@ -1322,11 +1475,16 @@ lpfc_sha_init(uint32_t * HashResultPointer) HashResultPointer[4] = 0xC3D2E1F0; } -/************************************************************************/ -/* */ -/* lpfc_sha_iterate */ -/* */ -/************************************************************************/ +/** + * lpfc_sha_iterate: Iterate initial hash table with the working hash table. + * @HashResultPointer: pointer to an initial/result hash table. + * @HashWorkingPointer: pointer to an working hash table. + * + * This routine iterates an initial hash table pointed by @HashResultPointer + * with the values from the working hash table pointeed by @HashWorkingPointer. + * The results are putting back to the initial hash table, returned through + * the @HashResultPointer as the result hash table. + **/ static void lpfc_sha_iterate(uint32_t * HashResultPointer, uint32_t * HashWorkingPointer) { @@ -1374,22 +1532,29 @@ lpfc_sha_iterate(uint32_t * HashResultPointer, uint32_t * HashWorkingPointer) } -/************************************************************************/ -/* */ -/* lpfc_challenge_key */ -/* */ -/************************************************************************/ +/** + * lpfc_challenge_key: Create challenge key based on WWPN of the HBA. + * @RandomChallenge: pointer to the entry of host challenge random number array. + * @HashWorking: pointer to the entry of the working hash array. + * + * This routine calculates the working hash array referred by @HashWorking + * from the challenge random numbers associated with the host, referred by + * @RandomChallenge. The result is put into the entry of the working hash + * array and returned by reference through @HashWorking. + **/ static void lpfc_challenge_key(uint32_t * RandomChallenge, uint32_t * HashWorking) { *HashWorking = (*RandomChallenge ^ *HashWorking); } -/************************************************************************/ -/* */ -/* lpfc_hba_init */ -/* */ -/************************************************************************/ +/** + * lpfc_hba_init: Perform special handling for LC HBA initialization. + * @phba: pointer to lpfc hba data structure. + * @hbainit: pointer to an array of unsigned 32-bit integers. + * + * This routine performs the special handling for LC HBA initialization. + **/ void lpfc_hba_init(struct lpfc_hba *phba, uint32_t *hbainit) { @@ -1412,6 +1577,15 @@ lpfc_hba_init(struct lpfc_hba *phba, uint32_t *hbainit) kfree(HashWorking); } +/** + * lpfc_cleanup: Performs vport cleanups before deleting a vport. + * @vport: pointer to a virtual N_Port data structure. + * + * This routine performs the necessary cleanups before deleting the @vport. + * It invokes the discovery state machine to perform necessary state + * transitions and to release the ndlps associated with the @vport. Note, + * the physical port is treated as @vport 0. + **/ void lpfc_cleanup(struct lpfc_vport *vport) { @@ -1459,14 +1633,6 @@ lpfc_cleanup(struct lpfc_vport *vport) lpfc_disc_state_machine(vport, ndlp, NULL, NLP_EVT_DEVICE_RM); - /* nlp_type zero is not defined, nlp_flag zero also not defined, - * nlp_state is unused, this happens when - * an initiator has logged - * into us so cleanup this ndlp. - */ - if ((ndlp->nlp_type == 0) && (ndlp->nlp_flag == 0) && - (ndlp->nlp_state == 0)) - lpfc_nlp_put(ndlp); } /* At this point, ALL ndlp's should be gone @@ -1482,7 +1648,7 @@ lpfc_cleanup(struct lpfc_vport *vport) &vport->fc_nodes, nlp_listp) { lpfc_printf_vlog(ndlp->vport, KERN_ERR, LOG_NODE, - "0282: did:x%x ndlp:x%p " + "0282 did:x%x ndlp:x%p " "usgmap:x%x refcnt:%d\n", ndlp->nlp_DID, (void *)ndlp, ndlp->nlp_usg_map, @@ -1498,6 +1664,14 @@ lpfc_cleanup(struct lpfc_vport *vport) return; } +/** + * lpfc_stop_vport_timers: Stop all the timers associated with a vport. + * @vport: pointer to a virtual N_Port data structure. + * + * This routine stops all the timers associated with a @vport. This function + * is invoked before disabling or deleting a @vport. Note that the physical + * port is treated as @vport 0. + **/ void lpfc_stop_vport_timers(struct lpfc_vport *vport) { @@ -1507,6 +1681,13 @@ lpfc_stop_vport_timers(struct lpfc_vport *vport) return; } +/** + * lpfc_stop_phba_timers: Stop all the timers associated with an HBA. + * @phba: pointer to lpfc hba data structure. + * + * This routine stops all the timers associated with a HBA. This function is + * invoked before either putting a HBA offline or unloading the driver. + **/ static void lpfc_stop_phba_timers(struct lpfc_hba *phba) { @@ -1516,9 +1697,20 @@ lpfc_stop_phba_timers(struct lpfc_hba *phba) del_timer_sync(&phba->fabric_block_timer); phba->hb_outstanding = 0; del_timer_sync(&phba->hb_tmofunc); + del_timer_sync(&phba->eratt_poll); return; } +/** + * lpfc_block_mgmt_io: Mark a HBA's management interface as blocked. + * @phba: pointer to lpfc hba data structure. + * + * This routine marks a HBA's management interface as blocked. Once the HBA's + * management interface is marked as blocked, all the user space access to + * the HBA, whether they are from sysfs interface or libdfc interface will + * all be blocked. The HBA is set to block the management interface when the + * driver prepares the HBA interface for online or offline. + **/ static void lpfc_block_mgmt_io(struct lpfc_hba * phba) { @@ -1529,6 +1721,18 @@ lpfc_block_mgmt_io(struct lpfc_hba * phba) spin_unlock_irqrestore(&phba->hbalock, iflag); } +/** + * lpfc_online: Initialize and bring a HBA online. + * @phba: pointer to lpfc hba data structure. + * + * This routine initializes the HBA and brings a HBA online. During this + * process, the management interface is blocked to prevent user space access + * to the HBA interfering with the driver initialization. + * + * Return codes + * 0 - successful + * 1 - failed + **/ int lpfc_online(struct lpfc_hba *phba) { @@ -1574,6 +1778,17 @@ lpfc_online(struct lpfc_hba *phba) return 0; } +/** + * lpfc_unblock_mgmt_io: Mark a HBA's management interface to be not blocked. + * @phba: pointer to lpfc hba data structure. + * + * This routine marks a HBA's management interface as not blocked. Once the + * HBA's management interface is marked as not blocked, all the user space + * access to the HBA, whether they are from sysfs interface or libdfc + * interface will be allowed. The HBA is set to block the management interface + * when the driver prepares the HBA interface for online or offline and then + * set to unblock the management interface afterwards. + **/ void lpfc_unblock_mgmt_io(struct lpfc_hba * phba) { @@ -1584,6 +1799,14 @@ lpfc_unblock_mgmt_io(struct lpfc_hba * phba) spin_unlock_irqrestore(&phba->hbalock, iflag); } +/** + * lpfc_offline_prep: Prepare a HBA to be brought offline. + * @phba: pointer to lpfc hba data structure. + * + * This routine is invoked to prepare a HBA to be brought offline. It performs + * unregistration login to all the nodes on all vports and flushes the mailbox + * queue to make it ready to be brought offline. + **/ void lpfc_offline_prep(struct lpfc_hba * phba) { @@ -1633,6 +1856,14 @@ lpfc_offline_prep(struct lpfc_hba * phba) lpfc_sli_flush_mbox_queue(phba); } +/** + * lpfc_offline: Bring a HBA offline. + * @phba: pointer to lpfc hba data structure. + * + * This routine actually brings a HBA offline. It stops all the timers + * associated with the HBA, brings down the SLI layer, and eventually + * marks the HBA as in offline state for the upper layer protocol. + **/ void lpfc_offline(struct lpfc_hba *phba) { @@ -1670,12 +1901,17 @@ lpfc_offline(struct lpfc_hba *phba) lpfc_destroy_vport_work_array(phba, vports); } -/****************************************************************************** -* Function name: lpfc_scsi_free -* -* Description: Called from lpfc_pci_remove_one free internal driver resources -* -******************************************************************************/ +/** + * lpfc_scsi_free: Free all the SCSI buffers and IOCBs from driver lists. + * @phba: pointer to lpfc hba data structure. + * + * This routine is to free all the SCSI buffers and IOCBs from the driver + * list back to kernel. It is called from lpfc_pci_remove_one to free + * the internal resources before the device is removed from the system. + * + * Return codes + * 0 - successful (for now, it always returns 0) + **/ static int lpfc_scsi_free(struct lpfc_hba *phba) { @@ -1704,6 +1940,22 @@ lpfc_scsi_free(struct lpfc_hba *phba) return 0; } +/** + * lpfc_create_port: Create an FC port. + * @phba: pointer to lpfc hba data structure. + * @instance: a unique integer ID to this FC port. + * @dev: pointer to the device data structure. + * + * This routine creates a FC port for the upper layer protocol. The FC port + * can be created on top of either a physical port or a virtual port provided + * by the HBA. This routine also allocates a SCSI host data structure (shost) + * and associates the FC port created before adding the shost into the SCSI + * layer. + * + * Return codes + * @vport - pointer to the virtual N_Port data structure. + * NULL - port create failed. + **/ struct lpfc_vport * lpfc_create_port(struct lpfc_hba *phba, int instance, struct device *dev) { @@ -1777,6 +2029,13 @@ out: return NULL; } +/** + * destroy_port: Destroy an FC port. + * @vport: pointer to an lpfc virtual N_Port data structure. + * + * This routine destroys a FC port from the upper layer protocol. All the + * resources associated with the port are released. + **/ void destroy_port(struct lpfc_vport *vport) { @@ -1797,6 +2056,16 @@ destroy_port(struct lpfc_vport *vport) return; } +/** + * lpfc_get_instance: Get a unique integer ID. + * + * This routine allocates a unique integer ID from lpfc_hba_index pool. It + * uses the kernel idr facility to perform the task. + * + * Return codes: + * instance - a unique integer ID allocated as the new instance. + * -1 - lpfc get instance failed. + **/ int lpfc_get_instance(void) { @@ -1810,11 +2079,21 @@ lpfc_get_instance(void) return instance; } -/* - * Note: there is no scan_start function as adapter initialization - * will have asynchronously kicked off the link initialization. - */ - +/** + * lpfc_scan_finished: method for SCSI layer to detect whether scan is done. + * @shost: pointer to SCSI host data structure. + * @time: elapsed time of the scan in jiffies. + * + * This routine is called by the SCSI layer with a SCSI host to determine + * whether the scan host is finished. + * + * Note: there is no scan_start function as adapter initialization will have + * asynchronously kicked off the link initialization. + * + * Return codes + * 0 - SCSI host scan is not over yet. + * 1 - SCSI host scan is over. + **/ int lpfc_scan_finished(struct Scsi_Host *shost, unsigned long time) { struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; @@ -1858,6 +2137,13 @@ finished: return stat; } +/** + * lpfc_host_attrib_init: Initialize SCSI host attributes on a FC port. + * @shost: pointer to SCSI host data structure. + * + * This routine initializes a given SCSI host attributes on a FC port. The + * SCSI host can be either on top of a physical port or a virtual port. + **/ void lpfc_host_attrib_init(struct Scsi_Host *shost) { struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; @@ -1906,42 +2192,157 @@ void lpfc_host_attrib_init(struct Scsi_Host *shost) spin_unlock_irq(shost->host_lock); } +/** + * lpfc_enable_msix: Enable MSI-X interrupt mode. + * @phba: pointer to lpfc hba data structure. + * + * This routine is invoked to enable the MSI-X interrupt vectors. The kernel + * function pci_enable_msix() is called to enable the MSI-X vectors. Note that + * pci_enable_msix(), once invoked, enables either all or nothing, depending + * on the current availability of PCI vector resources. The device driver is + * responsible for calling the individual request_irq() to register each MSI-X + * vector with a interrupt handler, which is done in this function. Note that + * later when device is unloading, the driver should always call free_irq() + * on all MSI-X vectors it has done request_irq() on before calling + * pci_disable_msix(). Failure to do so results in a BUG_ON() and a device + * will be left with MSI-X enabled and leaks its vectors. + * + * Return codes + * 0 - sucessful + * other values - error + **/ static int lpfc_enable_msix(struct lpfc_hba *phba) { - int error; + int rc, i; + LPFC_MBOXQ_t *pmb; - phba->msix_entries[0].entry = 0; - phba->msix_entries[0].vector = 0; + /* Set up MSI-X multi-message vectors */ + for (i = 0; i < LPFC_MSIX_VECTORS; i++) + phba->msix_entries[i].entry = i; - error = pci_enable_msix(phba->pcidev, phba->msix_entries, + /* Configure MSI-X capability structure */ + rc = pci_enable_msix(phba->pcidev, phba->msix_entries, ARRAY_SIZE(phba->msix_entries)); - if (error) { + if (rc) { lpfc_printf_log(phba, KERN_INFO, LOG_INIT, "0420 Enable MSI-X failed (%d), continuing " - "with MSI\n", error); - pci_disable_msix(phba->pcidev); - return error; + "with MSI\n", rc); + goto msi_fail_out; + } else + for (i = 0; i < LPFC_MSIX_VECTORS; i++) + lpfc_printf_log(phba, KERN_INFO, LOG_INIT, + "0477 MSI-X entry[%d]: vector=x%x " + "message=%d\n", i, + phba->msix_entries[i].vector, + phba->msix_entries[i].entry); + /* + * Assign MSI-X vectors to interrupt handlers + */ + + /* vector-0 is associated to slow-path handler */ + rc = request_irq(phba->msix_entries[0].vector, &lpfc_sp_intr_handler, + IRQF_SHARED, LPFC_SP_DRIVER_HANDLER_NAME, phba); + if (rc) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "0421 MSI-X slow-path request_irq failed " + "(%d), continuing with MSI\n", rc); + goto msi_fail_out; } - error = request_irq(phba->msix_entries[0].vector, lpfc_intr_handler, 0, - LPFC_DRIVER_NAME, phba); - if (error) { + /* vector-1 is associated to fast-path handler */ + rc = request_irq(phba->msix_entries[1].vector, &lpfc_fp_intr_handler, + IRQF_SHARED, LPFC_FP_DRIVER_HANDLER_NAME, phba); + + if (rc) { lpfc_printf_log(phba, KERN_ERR, LOG_INIT, - "0421 MSI-X request_irq failed (%d), " - "continuing with MSI\n", error); - pci_disable_msix(phba->pcidev); + "0429 MSI-X fast-path request_irq failed " + "(%d), continuing with MSI\n", rc); + goto irq_fail_out; } - return error; + + /* + * Configure HBA MSI-X attention conditions to messages + */ + pmb = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); + + if (!pmb) { + rc = -ENOMEM; + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "0474 Unable to allocate memory for issuing " + "MBOX_CONFIG_MSI command\n"); + goto mem_fail_out; + } + rc = lpfc_config_msi(phba, pmb); + if (rc) + goto mbx_fail_out; + rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL); + if (rc != MBX_SUCCESS) { + lpfc_printf_log(phba, KERN_ERR, LOG_MBOX, + "0351 Config MSI mailbox command failed, " + "mbxCmd x%x, mbxStatus x%x\n", + pmb->mb.mbxCommand, pmb->mb.mbxStatus); + goto mbx_fail_out; + } + + /* Free memory allocated for mailbox command */ + mempool_free(pmb, phba->mbox_mem_pool); + return rc; + +mbx_fail_out: + /* Free memory allocated for mailbox command */ + mempool_free(pmb, phba->mbox_mem_pool); + +mem_fail_out: + /* free the irq already requested */ + free_irq(phba->msix_entries[1].vector, phba); + +irq_fail_out: + /* free the irq already requested */ + free_irq(phba->msix_entries[0].vector, phba); + +msi_fail_out: + /* Unconfigure MSI-X capability structure */ + pci_disable_msix(phba->pcidev); + return rc; } +/** + * lpfc_disable_msix: Disable MSI-X interrupt mode. + * @phba: pointer to lpfc hba data structure. + * + * This routine is invoked to release the MSI-X vectors and then disable the + * MSI-X interrupt mode. + **/ static void lpfc_disable_msix(struct lpfc_hba *phba) { - free_irq(phba->msix_entries[0].vector, phba); + int i; + + /* Free up MSI-X multi-message vectors */ + for (i = 0; i < LPFC_MSIX_VECTORS; i++) + free_irq(phba->msix_entries[i].vector, phba); + /* Disable MSI-X */ pci_disable_msix(phba->pcidev); } +/** + * lpfc_pci_probe_one: lpfc PCI probe func to register device to PCI subsystem. + * @pdev: pointer to PCI device + * @pid: pointer to PCI device identifier + * + * This routine is to be registered to the kernel's PCI subsystem. When an + * Emulex HBA is presented in PCI bus, the kernel PCI subsystem looks at + * PCI device-specific information of the device and driver to see if the + * driver state that it can support this kind of device. If the match is + * successful, the driver core invokes this routine. If this routine + * determines it can claim the HBA, it does all the initialization that it + * needs to do to handle the HBA properly. + * + * Return code + * 0 - driver can claim the device + * negative value - driver can not claim the device + **/ static int __devinit lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) { @@ -1956,6 +2357,7 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) int i, hbq_count; uint16_t iotag; int bars = pci_select_bars(pdev, IORESOURCE_MEM); + struct lpfc_adapter_event_header adapter_event; if (pci_enable_device_mem(pdev)) goto out; @@ -1966,6 +2368,7 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) if (!phba) goto out_release_regions; + atomic_set(&phba->fast_event_count, 0); spin_lock_init(&phba->hbalock); /* Initialize ndlp management spinlock */ @@ -1978,6 +2381,7 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) goto out_free_phba; INIT_LIST_HEAD(&phba->port_list); + init_waitqueue_head(&phba->wait_4_mlo_m_q); /* * Get all the module params for configuring this host and then * establish the host. @@ -2000,6 +2404,9 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) init_timer(&phba->fabric_block_timer); phba->fabric_block_timer.function = lpfc_fabric_block_timeout; phba->fabric_block_timer.data = (unsigned long) phba; + init_timer(&phba->eratt_poll); + phba->eratt_poll.function = lpfc_poll_eratt; + phba->eratt_poll.data = (unsigned long) phba; pci_set_master(pdev); pci_try_set_mwi(pdev); @@ -2019,7 +2426,7 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) bar2map_len = pci_resource_len(phba->pcidev, 2); /* Map HBA SLIM to a kernel virtual address. */ - phba->slim_memmap_p = ioremap(phba->pci_bar0_map, bar0map_len); + phba->slim_memmap_p = ioremap(phba->pci_bar0_map, bar0map_len); if (!phba->slim_memmap_p) { error = -ENODEV; dev_printk(KERN_ERR, &pdev->dev, @@ -2037,12 +2444,18 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) } /* Allocate memory for SLI-2 structures */ - phba->slim2p = dma_alloc_coherent(&phba->pcidev->dev, SLI2_SLIM_SIZE, - &phba->slim2p_mapping, GFP_KERNEL); - if (!phba->slim2p) + phba->slim2p.virt = dma_alloc_coherent(&phba->pcidev->dev, + SLI2_SLIM_SIZE, + &phba->slim2p.phys, + GFP_KERNEL); + if (!phba->slim2p.virt) goto out_iounmap; - memset(phba->slim2p, 0, SLI2_SLIM_SIZE); + memset(phba->slim2p.virt, 0, SLI2_SLIM_SIZE); + phba->mbox = phba->slim2p.virt + offsetof(struct lpfc_sli2_slim, mbx); + phba->pcb = (phba->slim2p.virt + offsetof(struct lpfc_sli2_slim, pcb)); + phba->IOCBs = (phba->slim2p.virt + + offsetof(struct lpfc_sli2_slim, IOCBs)); phba->hbqslimp.virt = dma_alloc_coherent(&phba->pcidev->dev, lpfc_sli_hbq_size(), @@ -2111,7 +2524,7 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) phba->fc_arbtov = FF_DEF_ARBTOV; INIT_LIST_HEAD(&phba->work_list); - phba->work_ha_mask = (HA_ERATT|HA_MBATT|HA_LATT); + phba->work_ha_mask = (HA_ERATT | HA_MBATT | HA_LATT); phba->work_ha_mask |= (HA_RXMASK << (LPFC_ELS_RING * 4)); /* Initialize the wait queue head for the kernel thread */ @@ -2146,21 +2559,42 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) pci_set_drvdata(pdev, shost); phba->intr_type = NONE; + phba->MBslimaddr = phba->slim_memmap_p; + phba->HAregaddr = phba->ctrl_regs_memmap_p + HA_REG_OFFSET; + phba->CAregaddr = phba->ctrl_regs_memmap_p + CA_REG_OFFSET; + phba->HSregaddr = phba->ctrl_regs_memmap_p + HS_REG_OFFSET; + phba->HCregaddr = phba->ctrl_regs_memmap_p + HC_REG_OFFSET; + + /* Configure and enable interrupt */ if (phba->cfg_use_msi == 2) { - error = lpfc_enable_msix(phba); - if (!error) - phba->intr_type = MSIX; + /* Need to issue conf_port mbox cmd before conf_msi mbox cmd */ + error = lpfc_sli_config_port(phba, 3); + if (error) + lpfc_printf_log(phba, KERN_INFO, LOG_INIT, + "0427 Firmware not capable of SLI 3 mode.\n"); + else { + lpfc_printf_log(phba, KERN_INFO, LOG_INIT, + "0426 Firmware capable of SLI 3 mode.\n"); + /* Now, try to enable MSI-X interrupt mode */ + error = lpfc_enable_msix(phba); + if (!error) { + phba->intr_type = MSIX; + lpfc_printf_log(phba, KERN_INFO, LOG_INIT, + "0430 enable MSI-X mode.\n"); + } + } } /* Fallback to MSI if MSI-X initialization failed */ if (phba->cfg_use_msi >= 1 && phba->intr_type == NONE) { retval = pci_enable_msi(phba->pcidev); - if (!retval) + if (!retval) { phba->intr_type = MSI; - else lpfc_printf_log(phba, KERN_INFO, LOG_INIT, - "0452 Enable MSI failed, continuing " - "with IRQ\n"); + "0473 enable MSI mode.\n"); + } else + lpfc_printf_log(phba, KERN_INFO, LOG_INIT, + "0452 enable IRQ mode.\n"); } /* MSI-X is the only case the doesn't need to call request_irq */ @@ -2176,18 +2610,16 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) phba->intr_type = INTx; } - phba->MBslimaddr = phba->slim_memmap_p; - phba->HAregaddr = phba->ctrl_regs_memmap_p + HA_REG_OFFSET; - phba->CAregaddr = phba->ctrl_regs_memmap_p + CA_REG_OFFSET; - phba->HSregaddr = phba->ctrl_regs_memmap_p + HS_REG_OFFSET; - phba->HCregaddr = phba->ctrl_regs_memmap_p + HC_REG_OFFSET; - if (lpfc_alloc_sysfs_attr(vport)) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "1476 Failed to allocate sysfs attr\n"); error = -ENOMEM; goto out_free_irq; } if (lpfc_sli_hba_setup(phba)) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "1477 Failed to set up hba\n"); error = -ENODEV; goto out_remove_device; } @@ -2206,6 +2638,16 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) spin_unlock_irq(shost->host_lock); } + lpfc_printf_log(phba, KERN_INFO, LOG_INIT, + "0428 Perform SCSI scan\n"); + /* Send board arrival event to upper layer */ + adapter_event.event_type = FC_REG_ADAPTER_EVENT; + adapter_event.subcategory = LPFC_EVENT_ARRIVAL; + fc_host_post_vendor_event(shost, fc_get_event_number(), + sizeof(adapter_event), + (char *) &adapter_event, + SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_EMULEX); + scsi_scan_host(shost); return 0; @@ -2238,11 +2680,11 @@ out_free_iocbq: } lpfc_mem_free(phba); out_free_hbqslimp: - dma_free_coherent(&pdev->dev, lpfc_sli_hbq_size(), phba->hbqslimp.virt, - phba->hbqslimp.phys); + dma_free_coherent(&pdev->dev, lpfc_sli_hbq_size(), + phba->hbqslimp.virt, phba->hbqslimp.phys); out_free_slim: - dma_free_coherent(&pdev->dev, SLI2_SLIM_SIZE, phba->slim2p, - phba->slim2p_mapping); + dma_free_coherent(&pdev->dev, SLI2_SLIM_SIZE, + phba->slim2p.virt, phba->slim2p.phys); out_iounmap: iounmap(phba->ctrl_regs_memmap_p); out_iounmap_slim: @@ -2262,6 +2704,14 @@ out: return error; } +/** + * lpfc_pci_remove_one: lpfc PCI func to unregister device from PCI subsystem. + * @pdev: pointer to PCI device + * + * This routine is to be registered to the kernel's PCI subsystem. When an + * Emulex HBA is removed from PCI bus. It perform all the necessary cleanup + * for the HBA device to be removed from the PCI subsystem properly. + **/ static void __devexit lpfc_pci_remove_one(struct pci_dev *pdev) { @@ -2316,12 +2766,12 @@ lpfc_pci_remove_one(struct pci_dev *pdev) lpfc_scsi_free(phba); lpfc_mem_free(phba); - dma_free_coherent(&pdev->dev, lpfc_sli_hbq_size(), phba->hbqslimp.virt, - phba->hbqslimp.phys); + dma_free_coherent(&pdev->dev, lpfc_sli_hbq_size(), + phba->hbqslimp.virt, phba->hbqslimp.phys); /* Free resources associated with SLI2 interface */ dma_free_coherent(&pdev->dev, SLI2_SLIM_SIZE, - phba->slim2p, phba->slim2p_mapping); + phba->slim2p.virt, phba->slim2p.phys); /* unmap adapter SLIM and Control Registers */ iounmap(phba->ctrl_regs_memmap_p); @@ -2336,13 +2786,21 @@ lpfc_pci_remove_one(struct pci_dev *pdev) } /** - * lpfc_io_error_detected - called when PCI error is detected - * @pdev: Pointer to PCI device - * @state: The current pci conneection state + * lpfc_io_error_detected: Driver method for handling PCI I/O error detected. + * @pdev: pointer to PCI device. + * @state: the current PCI connection state. * - * This function is called after a PCI bus error affecting - * this device has been detected. - */ + * This routine is registered to the PCI subsystem for error handling. This + * function is called by the PCI subsystem after a PCI bus error affecting + * this device has been detected. When this function is invoked, it will + * need to stop all the I/Os and interrupt(s) to the device. Once that is + * done, it will return PCI_ERS_RESULT_NEED_RESET for the PCI subsystem to + * perform proper recovery as desired. + * + * Return codes + * PCI_ERS_RESULT_NEED_RESET - need to reset before recovery + * PCI_ERS_RESULT_DISCONNECT - device could not be recovered + **/ static pci_ers_result_t lpfc_io_error_detected(struct pci_dev *pdev, pci_channel_state_t state) { @@ -2351,8 +2809,15 @@ static pci_ers_result_t lpfc_io_error_detected(struct pci_dev *pdev, struct lpfc_sli *psli = &phba->sli; struct lpfc_sli_ring *pring; - if (state == pci_channel_io_perm_failure) + if (state == pci_channel_io_perm_failure) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "0472 PCI channel I/O permanent failure\n"); + /* Block all SCSI devices' I/Os on the host */ + lpfc_scsi_dev_block(phba); + /* Clean up all driver's outstanding SCSI I/Os */ + lpfc_sli_flush_fcp_rings(phba); return PCI_ERS_RESULT_DISCONNECT; + } pci_disable_device(pdev); /* @@ -2376,10 +2841,21 @@ static pci_ers_result_t lpfc_io_error_detected(struct pci_dev *pdev, } /** - * lpfc_io_slot_reset - called after the pci bus has been reset. - * @pdev: Pointer to PCI device + * lpfc_io_slot_reset: Restart a PCI device from scratch. + * @pdev: pointer to PCI device. + * + * This routine is registered to the PCI subsystem for error handling. This is + * called after PCI bus has been reset to restart the PCI card from scratch, + * as if from a cold-boot. During the PCI subsystem error recovery, after the + * driver returns PCI_ERS_RESULT_NEED_RESET, the PCI subsystem will perform + * proper error recovery and then call this routine before calling the .resume + * method to recover the device. This function will initialize the HBA device, + * enable the interrupt, but it will just put the HBA to offline state without + * passing any I/O traffic. * - * Restart the card from scratch, as if from a cold-boot. + * Return codes + * PCI_ERS_RESULT_RECOVERED - the device has been recovered + * PCI_ERS_RESULT_DISCONNECT - device could not be recovered */ static pci_ers_result_t lpfc_io_slot_reset(struct pci_dev *pdev) { @@ -2404,20 +2880,34 @@ static pci_ers_result_t lpfc_io_slot_reset(struct pci_dev *pdev) /* Enable configured interrupt method */ phba->intr_type = NONE; if (phba->cfg_use_msi == 2) { - error = lpfc_enable_msix(phba); - if (!error) - phba->intr_type = MSIX; + /* Need to issue conf_port mbox cmd before conf_msi mbox cmd */ + error = lpfc_sli_config_port(phba, 3); + if (error) + lpfc_printf_log(phba, KERN_INFO, LOG_INIT, + "0478 Firmware not capable of SLI 3 mode.\n"); + else { + lpfc_printf_log(phba, KERN_INFO, LOG_INIT, + "0479 Firmware capable of SLI 3 mode.\n"); + /* Now, try to enable MSI-X interrupt mode */ + error = lpfc_enable_msix(phba); + if (!error) { + phba->intr_type = MSIX; + lpfc_printf_log(phba, KERN_INFO, LOG_INIT, + "0480 enable MSI-X mode.\n"); + } + } } /* Fallback to MSI if MSI-X initialization failed */ if (phba->cfg_use_msi >= 1 && phba->intr_type == NONE) { retval = pci_enable_msi(phba->pcidev); - if (!retval) + if (!retval) { phba->intr_type = MSI; - else lpfc_printf_log(phba, KERN_INFO, LOG_INIT, - "0470 Enable MSI failed, continuing " - "with IRQ\n"); + "0481 enable MSI mode.\n"); + } else + lpfc_printf_log(phba, KERN_INFO, LOG_INIT, + "0470 enable IRQ mode.\n"); } /* MSI-X is the only case the doesn't need to call request_irq */ @@ -2440,11 +2930,13 @@ static pci_ers_result_t lpfc_io_slot_reset(struct pci_dev *pdev) } /** - * lpfc_io_resume - called when traffic can start flowing again. - * @pdev: Pointer to PCI device + * lpfc_io_resume: Resume PCI I/O operation. + * @pdev: pointer to PCI device * - * This callback is called when the error recovery driver tells us that - * its OK to resume normal operation. + * This routine is registered to the PCI subsystem for error handling. It is + * called when kernel error recovery tells the lpfc driver that it is ok to + * resume normal PCI operation after PCI bus error recovery. After this call, + * traffic can start to flow from this device again. */ static void lpfc_io_resume(struct pci_dev *pdev) { @@ -2491,6 +2983,8 @@ static struct pci_device_id lpfc_id_table[] = { PCI_ANY_ID, PCI_ANY_ID, }, {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_ZEPHYR, PCI_ANY_ID, PCI_ANY_ID, }, + {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_HORNET, + PCI_ANY_ID, PCI_ANY_ID, }, {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_ZEPHYR_SCSP, PCI_ANY_ID, PCI_ANY_ID, }, {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_ZEPHYR_DCSP, @@ -2521,6 +3015,12 @@ static struct pci_device_id lpfc_id_table[] = { PCI_ANY_ID, PCI_ANY_ID, }, {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_SAT_S, PCI_ANY_ID, PCI_ANY_ID, }, + {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_PROTEUS_VF, + PCI_ANY_ID, PCI_ANY_ID, }, + {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_PROTEUS_PF, + PCI_ANY_ID, PCI_ANY_ID, }, + {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_PROTEUS_S, + PCI_ANY_ID, PCI_ANY_ID, }, { 0 } }; @@ -2540,6 +3040,18 @@ static struct pci_driver lpfc_driver = { .err_handler = &lpfc_err_handler, }; +/** + * lpfc_init: lpfc module initialization routine. + * + * This routine is to be invoked when the lpfc module is loaded into the + * kernel. The special kernel macro module_init() is used to indicate the + * role of this routine to the kernel as lpfc module entry point. + * + * Return codes + * 0 - successful + * -ENOMEM - FC attach transport failed + * all others - failed + */ static int __init lpfc_init(void) { @@ -2567,12 +3079,20 @@ lpfc_init(void) error = pci_register_driver(&lpfc_driver); if (error) { fc_release_transport(lpfc_transport_template); - fc_release_transport(lpfc_vport_transport_template); + if (lpfc_enable_npiv) + fc_release_transport(lpfc_vport_transport_template); } return error; } +/** + * lpfc_exit: lpfc module removal routine. + * + * This routine is invoked when the lpfc module is removed from the kernel. + * The special kernel macro module_exit() is used to indicate the role of + * this routine to the kernel as lpfc module exit point. + */ static void __exit lpfc_exit(void) { diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c index 7a9be4c5b7c..7465fe746fe 100644 --- a/drivers/scsi/lpfc/lpfc_mbox.c +++ b/drivers/scsi/lpfc/lpfc_mbox.c @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2004-2007 Emulex. All rights reserved. * + * Copyright (C) 2004-2008 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * Portions Copyright (C) 2004-2005 Christoph Hellwig * @@ -30,6 +30,7 @@ #include "lpfc_hw.h" #include "lpfc_sli.h" +#include "lpfc_nl.h" #include "lpfc_disc.h" #include "lpfc_scsi.h" #include "lpfc.h" @@ -37,10 +38,20 @@ #include "lpfc_crtn.h" #include "lpfc_compat.h" -/**********************************************/ - -/* mailbox command */ -/**********************************************/ +/** + * lpfc_dump_mem: Prepare a mailbox command for retrieving HBA's VPD memory. + * @phba: pointer to lpfc hba data structure. + * @pmb: pointer to the driver internal queue element for mailbox command. + * @offset: offset for dumping VPD memory mailbox command. + * + * The dump mailbox command provides a method for the device driver to obtain + * various types of information from the HBA device. + * + * This routine prepares the mailbox command for dumping HBA Vital Product + * Data (VPD) memory. This mailbox command is to be used for retrieving a + * portion (DMP_RSP_SIZE bytes) of a HBA's VPD from the HBA at an address + * offset specified by the offset parameter. + **/ void lpfc_dump_mem(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, uint16_t offset) { @@ -65,10 +76,17 @@ lpfc_dump_mem(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, uint16_t offset) return; } -/**********************************************/ -/* lpfc_read_nv Issue a READ NVPARAM */ -/* mailbox command */ -/**********************************************/ +/** + * lpfc_read_nv: Prepare a mailbox command for reading HBA's NVRAM param. + * @phba: pointer to lpfc hba data structure. + * @pmb: pointer to the driver internal queue element for mailbox command. + * + * The read NVRAM mailbox command returns the HBA's non-volatile parameters + * that are used as defaults when the Fibre Channel link is brought on-line. + * + * This routine prepares the mailbox command for reading information stored + * in the HBA's NVRAM. Specifically, the HBA's WWNN and WWPN. + **/ void lpfc_read_nv(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) { @@ -81,10 +99,19 @@ lpfc_read_nv(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) return; } -/**********************************************/ -/* lpfc_config_async Issue a */ -/* MBX_ASYNC_EVT_ENABLE mailbox command */ -/**********************************************/ +/** + * lpfc_config_async: Prepare a mailbox command for enabling HBA async event. + * @phba: pointer to lpfc hba data structure. + * @pmb: pointer to the driver internal queue element for mailbox command. + * @ring: ring number for the asynchronous event to be configured. + * + * The asynchronous event enable mailbox command is used to enable the + * asynchronous event posting via the ASYNC_STATUS_CN IOCB response and + * specifies the default ring to which events are posted. + * + * This routine prepares the mailbox command for enabling HBA asynchronous + * event support on a IOCB ring. + **/ void lpfc_config_async(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, uint32_t ring) @@ -99,10 +126,19 @@ lpfc_config_async(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, return; } -/**********************************************/ -/* lpfc_heart_beat Issue a HEART_BEAT */ -/* mailbox command */ -/**********************************************/ +/** + * lpfc_heart_beat: Prepare a mailbox command for heart beat. + * @phba: pointer to lpfc hba data structure. + * @pmb: pointer to the driver internal queue element for mailbox command. + * + * The heart beat mailbox command is used to detect an unresponsive HBA, which + * is defined as any device where no error attention is sent and both mailbox + * and rings are not processed. + * + * This routine prepares the mailbox command for issuing a heart beat in the + * form of mailbox command to the HBA. The timely completion of the heart + * beat mailbox command indicates the health of the HBA. + **/ void lpfc_heart_beat(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) { @@ -115,10 +151,26 @@ lpfc_heart_beat(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) return; } -/**********************************************/ -/* lpfc_read_la Issue a READ LA */ -/* mailbox command */ -/**********************************************/ +/** + * lpfc_read_la: Prepare a mailbox command for reading HBA link attention. + * @phba: pointer to lpfc hba data structure. + * @pmb: pointer to the driver internal queue element for mailbox command. + * @mp: DMA buffer memory for reading the link attention information into. + * + * The read link attention mailbox command is issued to read the Link Event + * Attention information indicated by the HBA port when the Link Event bit + * of the Host Attention (HSTATT) register is set to 1. A Link Event + * Attention occurs based on an exception detected at the Fibre Channel link + * interface. + * + * This routine prepares the mailbox command for reading HBA link attention + * information. A DMA memory has been set aside and address passed to the + * HBA through @mp for the HBA to DMA link attention information into the + * memory as part of the execution of the mailbox command. + * + * Return codes + * 0 - Success (currently always return 0) + **/ int lpfc_read_la(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, struct lpfc_dmabuf *mp) { @@ -143,10 +195,21 @@ lpfc_read_la(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, struct lpfc_dmabuf *mp) return (0); } -/**********************************************/ -/* lpfc_clear_la Issue a CLEAR LA */ -/* mailbox command */ -/**********************************************/ +/** + * lpfc_clear_la: Prepare a mailbox command for clearing HBA link attention. + * @phba: pointer to lpfc hba data structure. + * @pmb: pointer to the driver internal queue element for mailbox command. + * + * The clear link attention mailbox command is issued to clear the link event + * attention condition indicated by the Link Event bit of the Host Attention + * (HSTATT) register. The link event attention condition is cleared only if + * the event tag specified matches that of the current link event counter. + * The current event tag is read using the read link attention event mailbox + * command. + * + * This routine prepares the mailbox command for clearing HBA link attention + * information. + **/ void lpfc_clear_la(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) { @@ -161,10 +224,20 @@ lpfc_clear_la(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) return; } -/**************************************************/ -/* lpfc_config_link Issue a CONFIG LINK */ -/* mailbox command */ -/**************************************************/ +/** + * lpfc_config_link: Prepare a mailbox command for configuring link on a HBA. + * @phba: pointer to lpfc hba data structure. + * @pmb: pointer to the driver internal queue element for mailbox command. + * + * The configure link mailbox command is used before the initialize link + * mailbox command to override default value and to configure link-oriented + * parameters such as DID address and various timers. Typically, this + * command would be used after an F_Port login to set the returned DID address + * and the fabric timeout values. This command is not valid before a configure + * port command has configured the HBA port. + * + * This routine prepares the mailbox command for configuring link on a HBA. + **/ void lpfc_config_link(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) { @@ -199,10 +272,98 @@ lpfc_config_link(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) return; } -/**********************************************/ -/* lpfc_init_link Issue an INIT LINK */ -/* mailbox command */ -/**********************************************/ +/** + * lpfc_config_msi: Prepare a mailbox command for configuring msi-x. + * @phba: pointer to lpfc hba data structure. + * @pmb: pointer to the driver internal queue element for mailbox command. + * + * The configure MSI-X mailbox command is used to configure the HBA's SLI-3 + * MSI-X multi-message interrupt vector association to interrupt attention + * conditions. + * + * Return codes + * 0 - Success + * -EINVAL - Failure + **/ +int +lpfc_config_msi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) +{ + MAILBOX_t *mb = &pmb->mb; + uint32_t attentionConditions[2]; + + /* Sanity check */ + if (phba->cfg_use_msi != 2) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "0475 Not configured for supporting MSI-X " + "cfg_use_msi: 0x%x\n", phba->cfg_use_msi); + return -EINVAL; + } + + if (phba->sli_rev < 3) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "0476 HBA not supporting SLI-3 or later " + "SLI Revision: 0x%x\n", phba->sli_rev); + return -EINVAL; + } + + /* Clear mailbox command fields */ + memset(pmb, 0, sizeof(LPFC_MBOXQ_t)); + + /* + * SLI-3, Message Signaled Interrupt Fearure. + */ + + /* Multi-message attention configuration */ + attentionConditions[0] = (HA_R0ATT | HA_R1ATT | HA_R2ATT | HA_ERATT | + HA_LATT | HA_MBATT); + attentionConditions[1] = 0; + + mb->un.varCfgMSI.attentionConditions[0] = attentionConditions[0]; + mb->un.varCfgMSI.attentionConditions[1] = attentionConditions[1]; + + /* + * Set up message number to HA bit association + */ +#ifdef __BIG_ENDIAN_BITFIELD + /* RA0 (FCP Ring) */ + mb->un.varCfgMSI.messageNumberByHA[HA_R0_POS] = 1; + /* RA1 (Other Protocol Extra Ring) */ + mb->un.varCfgMSI.messageNumberByHA[HA_R1_POS] = 1; +#else /* __LITTLE_ENDIAN_BITFIELD */ + /* RA0 (FCP Ring) */ + mb->un.varCfgMSI.messageNumberByHA[HA_R0_POS^3] = 1; + /* RA1 (Other Protocol Extra Ring) */ + mb->un.varCfgMSI.messageNumberByHA[HA_R1_POS^3] = 1; +#endif + /* Multi-message interrupt autoclear configuration*/ + mb->un.varCfgMSI.autoClearHA[0] = attentionConditions[0]; + mb->un.varCfgMSI.autoClearHA[1] = attentionConditions[1]; + + /* For now, HBA autoclear does not work reliably, disable it */ + mb->un.varCfgMSI.autoClearHA[0] = 0; + mb->un.varCfgMSI.autoClearHA[1] = 0; + + /* Set command and owner bit */ + mb->mbxCommand = MBX_CONFIG_MSI; + mb->mbxOwner = OWN_HOST; + + return 0; +} + +/** + * lpfc_init_link: Prepare a mailbox command for initialize link on a HBA. + * @phba: pointer to lpfc hba data structure. + * @pmb: pointer to the driver internal queue element for mailbox command. + * @topology: the link topology for the link to be initialized to. + * @linkspeed: the link speed for the link to be initialized to. + * + * The initialize link mailbox command is used to initialize the Fibre + * Channel link. This command must follow a configure port command that + * establishes the mode of operation. + * + * This routine prepares the mailbox command for initializing link on a HBA + * with the specified link topology and speed. + **/ void lpfc_init_link(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, uint32_t topology, uint32_t linkspeed) @@ -269,10 +430,27 @@ lpfc_init_link(struct lpfc_hba * phba, return; } -/**********************************************/ -/* lpfc_read_sparam Issue a READ SPARAM */ -/* mailbox command */ -/**********************************************/ +/** + * lpfc_read_sparam: Prepare a mailbox command for reading HBA parameters. + * @phba: pointer to lpfc hba data structure. + * @pmb: pointer to the driver internal queue element for mailbox command. + * @vpi: virtual N_Port identifier. + * + * The read service parameter mailbox command is used to read the HBA port + * service parameters. The service parameters are read into the buffer + * specified directly by a BDE in the mailbox command. These service + * parameters may then be used to build the payload of an N_Port/F_POrt + * login request and reply (LOGI/ACC). + * + * This routine prepares the mailbox command for reading HBA port service + * parameters. The DMA memory is allocated in this function and the addresses + * are populated into the mailbox command for the HBA to DMA the service + * parameters into. + * + * Return codes + * 0 - Success + * 1 - DMA memory allocation failed + **/ int lpfc_read_sparam(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb, int vpi) { @@ -312,10 +490,21 @@ lpfc_read_sparam(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb, int vpi) return (0); } -/********************************************/ -/* lpfc_unreg_did Issue a UNREG_DID */ -/* mailbox command */ -/********************************************/ +/** + * lpfc_unreg_did: Prepare a mailbox command for unregistering DID. + * @phba: pointer to lpfc hba data structure. + * @vpi: virtual N_Port identifier. + * @did: remote port identifier. + * @pmb: pointer to the driver internal queue element for mailbox command. + * + * The unregister DID mailbox command is used to unregister an N_Port/F_Port + * login for an unknown RPI by specifying the DID of a remote port. This + * command frees an RPI context in the HBA port. This has the effect of + * performing an implicit N_Port/F_Port logout. + * + * This routine prepares the mailbox command for unregistering a remote + * N_Port/F_Port (DID) login. + **/ void lpfc_unreg_did(struct lpfc_hba * phba, uint16_t vpi, uint32_t did, LPFC_MBOXQ_t * pmb) @@ -333,10 +522,19 @@ lpfc_unreg_did(struct lpfc_hba * phba, uint16_t vpi, uint32_t did, return; } -/**********************************************/ -/* lpfc_read_nv Issue a READ CONFIG */ -/* mailbox command */ -/**********************************************/ +/** + * lpfc_read_config: Prepare a mailbox command for reading HBA configuration. + * @phba: pointer to lpfc hba data structure. + * @pmb: pointer to the driver internal queue element for mailbox command. + * + * The read configuration mailbox command is used to read the HBA port + * configuration parameters. This mailbox command provides a method for + * seeing any parameters that may have changed via various configuration + * mailbox commands. + * + * This routine prepares the mailbox command for reading out HBA configuration + * parameters. + **/ void lpfc_read_config(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) { @@ -350,10 +548,18 @@ lpfc_read_config(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) return; } -/*************************************************/ -/* lpfc_read_lnk_stat Issue a READ LINK STATUS */ -/* mailbox command */ -/*************************************************/ +/** + * lpfc_read_lnk_stat: Prepare a mailbox command for reading HBA link stats. + * @phba: pointer to lpfc hba data structure. + * @pmb: pointer to the driver internal queue element for mailbox command. + * + * The read link status mailbox command is used to read the link status from + * the HBA. Link status includes all link-related error counters. These + * counters are maintained by the HBA and originated in the link hardware + * unit. Note that all of these counters wrap. + * + * This routine prepares the mailbox command for reading out HBA link status. + **/ void lpfc_read_lnk_stat(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) { @@ -367,10 +573,30 @@ lpfc_read_lnk_stat(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) return; } -/********************************************/ -/* lpfc_reg_login Issue a REG_LOGIN */ -/* mailbox command */ -/********************************************/ +/** + * lpfc_reg_login: Prepare a mailbox command for registering remote login. + * @phba: pointer to lpfc hba data structure. + * @vpi: virtual N_Port identifier. + * @did: remote port identifier. + * @param: pointer to memory holding the server parameters. + * @pmb: pointer to the driver internal queue element for mailbox command. + * @flag: action flag to be passed back for the complete function. + * + * The registration login mailbox command is used to register an N_Port or + * F_Port login. This registration allows the HBA to cache the remote N_Port + * service parameters internally and thereby make the appropriate FC-2 + * decisions. The remote port service parameters are handed off by the driver + * to the HBA using a descriptor entry that directly identifies a buffer in + * host memory. In exchange, the HBA returns an RPI identifier. + * + * This routine prepares the mailbox command for registering remote port login. + * The function allocates DMA buffer for passing the service parameters to the + * HBA with the mailbox command. + * + * Return codes + * 0 - Success + * 1 - DMA memory allocation failed + **/ int lpfc_reg_login(struct lpfc_hba *phba, uint16_t vpi, uint32_t did, uint8_t *param, LPFC_MBOXQ_t *pmb, uint32_t flag) @@ -418,10 +644,20 @@ lpfc_reg_login(struct lpfc_hba *phba, uint16_t vpi, uint32_t did, return (0); } -/**********************************************/ -/* lpfc_unreg_login Issue a UNREG_LOGIN */ -/* mailbox command */ -/**********************************************/ +/** + * lpfc_unreg_login: Prepare a mailbox command for unregistering remote login. + * @phba: pointer to lpfc hba data structure. + * @vpi: virtual N_Port identifier. + * @rpi: remote port identifier + * @pmb: pointer to the driver internal queue element for mailbox command. + * + * The unregistration login mailbox command is used to unregister an N_Port + * or F_Port login. This command frees an RPI context in the HBA. It has the + * effect of performing an implicit N_Port/F_Port logout. + * + * This routine prepares the mailbox command for unregistering remote port + * login. + **/ void lpfc_unreg_login(struct lpfc_hba *phba, uint16_t vpi, uint32_t rpi, LPFC_MBOXQ_t * pmb) @@ -440,10 +676,21 @@ lpfc_unreg_login(struct lpfc_hba *phba, uint16_t vpi, uint32_t rpi, return; } -/**************************************************/ -/* lpfc_reg_vpi Issue a REG_VPI */ -/* mailbox command */ -/**************************************************/ +/** + * lpfc_reg_vpi: Prepare a mailbox command for registering vport identifier. + * @phba: pointer to lpfc hba data structure. + * @vpi: virtual N_Port identifier. + * @sid: Fibre Channel S_ID (N_Port_ID assigned to a virtual N_Port). + * @pmb: pointer to the driver internal queue element for mailbox command. + * + * The registration vport identifier mailbox command is used to activate a + * virtual N_Port after it has acquired an N_Port_ID. The HBA validates the + * N_Port_ID against the information in the selected virtual N_Port context + * block and marks it active to allow normal processing of IOCB commands and + * received unsolicited exchanges. + * + * This routine prepares the mailbox command for registering a virtual N_Port. + **/ void lpfc_reg_vpi(struct lpfc_hba *phba, uint16_t vpi, uint32_t sid, LPFC_MBOXQ_t *pmb) @@ -461,10 +708,22 @@ lpfc_reg_vpi(struct lpfc_hba *phba, uint16_t vpi, uint32_t sid, } -/**************************************************/ -/* lpfc_unreg_vpi Issue a UNREG_VNPI */ -/* mailbox command */ -/**************************************************/ +/** + * lpfc_unreg_vpi: Prepare a mailbox command for unregistering vport id. + * @phba: pointer to lpfc hba data structure. + * @vpi: virtual N_Port identifier. + * @pmb: pointer to the driver internal queue element for mailbox command. + * + * The unregistration vport identifier mailbox command is used to inactivate + * a virtual N_Port. The driver must have logged out and unregistered all + * remote N_Ports to abort any activity on the virtual N_Port. The HBA will + * unregisters any default RPIs associated with the specified vpi, aborting + * any active exchanges. The HBA will post the mailbox response after making + * the virtual N_Port inactive. + * + * This routine prepares the mailbox command for unregistering a virtual + * N_Port. + **/ void lpfc_unreg_vpi(struct lpfc_hba *phba, uint16_t vpi, LPFC_MBOXQ_t *pmb) { @@ -479,12 +738,19 @@ lpfc_unreg_vpi(struct lpfc_hba *phba, uint16_t vpi, LPFC_MBOXQ_t *pmb) } +/** + * lpfc_config_pcb_setup: Set up IOCB rings in the Port Control Block (PCB) + * @phba: pointer to lpfc hba data structure. + * + * This routine sets up and initializes the IOCB rings in the Port Control + * Block (PCB). + **/ static void lpfc_config_pcb_setup(struct lpfc_hba * phba) { struct lpfc_sli *psli = &phba->sli; struct lpfc_sli_ring *pring; - PCB_t *pcbp = &phba->slim2p->pcb; + PCB_t *pcbp = phba->pcb; dma_addr_t pdma_addr; uint32_t offset; uint32_t iocbCnt = 0; @@ -513,29 +779,43 @@ lpfc_config_pcb_setup(struct lpfc_hba * phba) continue; } /* Command ring setup for ring */ - pring->cmdringaddr = (void *) &phba->slim2p->IOCBs[iocbCnt]; + pring->cmdringaddr = (void *)&phba->IOCBs[iocbCnt]; pcbp->rdsc[i].cmdEntries = pring->numCiocb; - offset = (uint8_t *) &phba->slim2p->IOCBs[iocbCnt] - - (uint8_t *) phba->slim2p; - pdma_addr = phba->slim2p_mapping + offset; + offset = (uint8_t *) &phba->IOCBs[iocbCnt] - + (uint8_t *) phba->slim2p.virt; + pdma_addr = phba->slim2p.phys + offset; pcbp->rdsc[i].cmdAddrHigh = putPaddrHigh(pdma_addr); pcbp->rdsc[i].cmdAddrLow = putPaddrLow(pdma_addr); iocbCnt += pring->numCiocb; /* Response ring setup for ring */ - pring->rspringaddr = (void *) &phba->slim2p->IOCBs[iocbCnt]; + pring->rspringaddr = (void *) &phba->IOCBs[iocbCnt]; pcbp->rdsc[i].rspEntries = pring->numRiocb; - offset = (uint8_t *)&phba->slim2p->IOCBs[iocbCnt] - - (uint8_t *)phba->slim2p; - pdma_addr = phba->slim2p_mapping + offset; + offset = (uint8_t *)&phba->IOCBs[iocbCnt] - + (uint8_t *)phba->slim2p.virt; + pdma_addr = phba->slim2p.phys + offset; pcbp->rdsc[i].rspAddrHigh = putPaddrHigh(pdma_addr); pcbp->rdsc[i].rspAddrLow = putPaddrLow(pdma_addr); iocbCnt += pring->numRiocb; } } +/** + * lpfc_read_rev: Prepare a mailbox command for reading HBA revision. + * @phba: pointer to lpfc hba data structure. + * @pmb: pointer to the driver internal queue element for mailbox command. + * + * The read revision mailbox command is used to read the revision levels of + * the HBA components. These components include hardware units, resident + * firmware, and available firmware. HBAs that supports SLI-3 mode of + * operation provide different response information depending on the version + * requested by the driver. + * + * This routine prepares the mailbox command for reading HBA revision + * information. + **/ void lpfc_read_rev(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) { @@ -548,6 +828,16 @@ lpfc_read_rev(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) return; } +/** + * lpfc_build_hbq_profile2: Set up the HBQ Selection Profile 2. + * @hbqmb: pointer to the HBQ configuration data structure in mailbox command. + * @hbq_desc: pointer to the HBQ selection profile descriptor. + * + * The Host Buffer Queue (HBQ) Selection Profile 2 specifies that the HBA + * tests the incoming frames' R_CTL/TYPE fields with works 10:15 and performs + * the Sequence Length Test using the fields in the Selection Profile 2 + * extension in words 20:31. + **/ static void lpfc_build_hbq_profile2(struct config_hbq_var *hbqmb, struct lpfc_hbq_init *hbq_desc) @@ -557,6 +847,16 @@ lpfc_build_hbq_profile2(struct config_hbq_var *hbqmb, hbqmb->profiles.profile2.seqlenoff = hbq_desc->seqlenoff; } +/** + * lpfc_build_hbq_profile3: Set up the HBQ Selection Profile 3. + * @hbqmb: pointer to the HBQ configuration data structure in mailbox command. + * @hbq_desc: pointer to the HBQ selection profile descriptor. + * + * The Host Buffer Queue (HBQ) Selection Profile 3 specifies that the HBA + * tests the incoming frame's R_CTL/TYPE fields with words 10:15 and performs + * the Sequence Length Test and Byte Field Test using the fields in the + * Selection Profile 3 extension in words 20:31. + **/ static void lpfc_build_hbq_profile3(struct config_hbq_var *hbqmb, struct lpfc_hbq_init *hbq_desc) @@ -569,6 +869,17 @@ lpfc_build_hbq_profile3(struct config_hbq_var *hbqmb, sizeof(hbqmb->profiles.profile3.cmdmatch)); } +/** + * lpfc_build_hbq_profile5: Set up the HBQ Selection Profile 5. + * @hbqmb: pointer to the HBQ configuration data structure in mailbox command. + * @hbq_desc: pointer to the HBQ selection profile descriptor. + * + * The Host Buffer Queue (HBQ) Selection Profile 5 specifies a header HBQ. The + * HBA tests the initial frame of an incoming sequence using the frame's + * R_CTL/TYPE fields with words 10:15 and performs the Sequence Length Test + * and Byte Field Test using the fields in the Selection Profile 5 extension + * words 20:31. + **/ static void lpfc_build_hbq_profile5(struct config_hbq_var *hbqmb, struct lpfc_hbq_init *hbq_desc) @@ -581,6 +892,20 @@ lpfc_build_hbq_profile5(struct config_hbq_var *hbqmb, sizeof(hbqmb->profiles.profile5.cmdmatch)); } +/** + * lpfc_config_hbq: Prepare a mailbox command for configuring an HBQ. + * @phba: pointer to lpfc hba data structure. + * @id: HBQ identifier. + * @hbq_desc: pointer to the HBA descriptor data structure. + * @hbq_entry_index: index of the HBQ entry data structures. + * @pmb: pointer to the driver internal queue element for mailbox command. + * + * The configure HBQ (Host Buffer Queue) mailbox command is used to configure + * an HBQ. The configuration binds events that require buffers to a particular + * ring and HBQ based on a selection profile. + * + * This routine prepares the mailbox command for configuring an HBQ. + **/ void lpfc_config_hbq(struct lpfc_hba *phba, uint32_t id, struct lpfc_hbq_init *hbq_desc, @@ -641,8 +966,23 @@ lpfc_config_hbq(struct lpfc_hba *phba, uint32_t id, return; } - - +/** + * lpfc_config_ring: Prepare a mailbox command for configuring an IOCB ring. + * @phba: pointer to lpfc hba data structure. + * @ring: + * @pmb: pointer to the driver internal queue element for mailbox command. + * + * The configure ring mailbox command is used to configure an IOCB ring. This + * configuration binds from one to six of HBA RC_CTL/TYPE mask entries to the + * ring. This is used to map incoming sequences to a particular ring whose + * RC_CTL/TYPE mask entry matches that of the sequence. The driver should not + * attempt to configure a ring whose number is greater than the number + * specified in the Port Control Block (PCB). It is an error to issue the + * configure ring command more than once with the same ring number. The HBA + * returns an error if the driver attempts this. + * + * This routine prepares the mailbox command for configuring IOCB ring. + **/ void lpfc_config_ring(struct lpfc_hba * phba, int ring, LPFC_MBOXQ_t * pmb) { @@ -684,6 +1024,20 @@ lpfc_config_ring(struct lpfc_hba * phba, int ring, LPFC_MBOXQ_t * pmb) return; } +/** + * lpfc_config_port: Prepare a mailbox command for configuring port. + * @phba: pointer to lpfc hba data structure. + * @pmb: pointer to the driver internal queue element for mailbox command. + * + * The configure port mailbox command is used to identify the Port Control + * Block (PCB) in the driver memory. After this command is issued, the + * driver must not access the mailbox in the HBA without first resetting + * the HBA. The HBA may copy the PCB information to internal storage for + * subsequent use; the driver can not change the PCB information unless it + * resets the HBA. + * + * This routine prepares the mailbox command for configuring port. + **/ void lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) { @@ -702,8 +1056,8 @@ lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) mb->un.varCfgPort.pcbLen = sizeof(PCB_t); - offset = (uint8_t *)&phba->slim2p->pcb - (uint8_t *)phba->slim2p; - pdma_addr = phba->slim2p_mapping + offset; + offset = (uint8_t *)phba->pcb - (uint8_t *)phba->slim2p.virt; + pdma_addr = phba->slim2p.phys + offset; mb->un.varCfgPort.pcbLow = putPaddrLow(pdma_addr); mb->un.varCfgPort.pcbHigh = putPaddrHigh(pdma_addr); @@ -711,12 +1065,13 @@ lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) if (phba->sli_rev == 3 && phba->vpd.sli3Feat.cerbm) { mb->un.varCfgPort.cerbm = 1; /* Request HBQs */ + mb->un.varCfgPort.ccrp = 1; /* Command Ring Polling */ + mb->un.varCfgPort.cinb = 1; /* Interrupt Notification Block */ mb->un.varCfgPort.max_hbq = lpfc_sli_hbq_count(); if (phba->max_vpi && phba->cfg_enable_npiv && phba->vpd.sli3Feat.cmv) { mb->un.varCfgPort.max_vpi = phba->max_vpi; mb->un.varCfgPort.cmv = 1; - phba->sli3_options |= LPFC_SLI3_NPIV_ENABLED; } else mb->un.varCfgPort.max_vpi = phba->max_vpi = 0; } else @@ -724,16 +1079,15 @@ lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) mb->un.varCfgPort.sli_mode = phba->sli_rev; /* Now setup pcb */ - phba->slim2p->pcb.type = TYPE_NATIVE_SLI2; - phba->slim2p->pcb.feature = FEATURE_INITIAL_SLI2; + phba->pcb->type = TYPE_NATIVE_SLI2; + phba->pcb->feature = FEATURE_INITIAL_SLI2; /* Setup Mailbox pointers */ - phba->slim2p->pcb.mailBoxSize = offsetof(MAILBOX_t, us) + - sizeof(struct sli2_desc); - offset = (uint8_t *)&phba->slim2p->mbx - (uint8_t *)phba->slim2p; - pdma_addr = phba->slim2p_mapping + offset; - phba->slim2p->pcb.mbAddrHigh = putPaddrHigh(pdma_addr); - phba->slim2p->pcb.mbAddrLow = putPaddrLow(pdma_addr); + phba->pcb->mailBoxSize = sizeof(MAILBOX_t); + offset = (uint8_t *)phba->mbox - (uint8_t *)phba->slim2p.virt; + pdma_addr = phba->slim2p.phys + offset; + phba->pcb->mbAddrHigh = putPaddrHigh(pdma_addr); + phba->pcb->mbAddrLow = putPaddrLow(pdma_addr); /* * Setup Host Group ring pointer. @@ -794,13 +1148,13 @@ lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) } /* mask off BAR0's flag bits 0 - 3 */ - phba->slim2p->pcb.hgpAddrLow = (bar_low & PCI_BASE_ADDRESS_MEM_MASK) + - (void __iomem *) phba->host_gp - + phba->pcb->hgpAddrLow = (bar_low & PCI_BASE_ADDRESS_MEM_MASK) + + (void __iomem *)phba->host_gp - (void __iomem *)phba->MBslimaddr; if (bar_low & PCI_BASE_ADDRESS_MEM_TYPE_64) - phba->slim2p->pcb.hgpAddrHigh = bar_high; + phba->pcb->hgpAddrHigh = bar_high; else - phba->slim2p->pcb.hgpAddrHigh = 0; + phba->pcb->hgpAddrHigh = 0; /* write HGP data to SLIM at the required longword offset */ memset(&hgp, 0, sizeof(struct lpfc_hgp)); @@ -810,17 +1164,19 @@ lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) } /* Setup Port Group ring pointer */ - if (phba->sli_rev == 3) - pgp_offset = (uint8_t *)&phba->slim2p->mbx.us.s3_pgp.port - - (uint8_t *)phba->slim2p; - else - pgp_offset = (uint8_t *)&phba->slim2p->mbx.us.s2.port - - (uint8_t *)phba->slim2p; - - pdma_addr = phba->slim2p_mapping + pgp_offset; - phba->slim2p->pcb.pgpAddrHigh = putPaddrHigh(pdma_addr); - phba->slim2p->pcb.pgpAddrLow = putPaddrLow(pdma_addr); - phba->hbq_get = &phba->slim2p->mbx.us.s3_pgp.hbq_get[0]; + if (phba->sli3_options & LPFC_SLI3_INB_ENABLED) { + pgp_offset = offsetof(struct lpfc_sli2_slim, + mbx.us.s3_inb_pgp.port); + phba->hbq_get = phba->mbox->us.s3_inb_pgp.hbq_get; + } else if (phba->sli_rev == 3) { + pgp_offset = offsetof(struct lpfc_sli2_slim, + mbx.us.s3_pgp.port); + phba->hbq_get = phba->mbox->us.s3_pgp.hbq_get; + } else + pgp_offset = offsetof(struct lpfc_sli2_slim, mbx.us.s2.port); + pdma_addr = phba->slim2p.phys + pgp_offset; + phba->pcb->pgpAddrHigh = putPaddrHigh(pdma_addr); + phba->pcb->pgpAddrLow = putPaddrLow(pdma_addr); /* Use callback routine to setp rings in the pcb */ lpfc_config_pcb_setup(phba); @@ -835,10 +1191,24 @@ lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) } /* Swap PCB if needed */ - lpfc_sli_pcimem_bcopy(&phba->slim2p->pcb, &phba->slim2p->pcb, - sizeof(PCB_t)); + lpfc_sli_pcimem_bcopy(phba->pcb, phba->pcb, sizeof(PCB_t)); } +/** + * lpfc_kill_board: Prepare a mailbox command for killing board. + * @phba: pointer to lpfc hba data structure. + * @pmb: pointer to the driver internal queue element for mailbox command. + * + * The kill board mailbox command is used to tell firmware to perform a + * graceful shutdown of a channel on a specified board to prepare for reset. + * When the kill board mailbox command is received, the ER3 bit is set to 1 + * in the Host Status register and the ER Attention bit is set to 1 in the + * Host Attention register of the HBA function that received the kill board + * command. + * + * This routine prepares the mailbox command for killing the board in + * preparation for a graceful shutdown. + **/ void lpfc_kill_board(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) { @@ -850,6 +1220,16 @@ lpfc_kill_board(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) return; } +/** + * lpfc_mbox_put: Put a mailbox cmd into the tail of driver's mailbox queue. + * @phba: pointer to lpfc hba data structure. + * @mbq: pointer to the driver internal queue element for mailbox command. + * + * Driver maintains a internal mailbox command queue implemented as a linked + * list. When a mailbox command is issued, it shall be put into the mailbox + * command queue such that they shall be processed orderly as HBA can process + * one mailbox command at a time. + **/ void lpfc_mbox_put(struct lpfc_hba * phba, LPFC_MBOXQ_t * mbq) { @@ -864,6 +1244,20 @@ lpfc_mbox_put(struct lpfc_hba * phba, LPFC_MBOXQ_t * mbq) return; } +/** + * lpfc_mbox_get: Remove a mailbox cmd from the head of driver's mailbox queue. + * @phba: pointer to lpfc hba data structure. + * + * Driver maintains a internal mailbox command queue implemented as a linked + * list. When a mailbox command is issued, it shall be put into the mailbox + * command queue such that they shall be processed orderly as HBA can process + * one mailbox command at a time. After HBA finished processing a mailbox + * command, the driver will remove a pending mailbox command from the head of + * the mailbox command queue and send to the HBA for processing. + * + * Return codes + * pointer to the driver internal queue element for mailbox command. + **/ LPFC_MBOXQ_t * lpfc_mbox_get(struct lpfc_hba * phba) { @@ -877,6 +1271,17 @@ lpfc_mbox_get(struct lpfc_hba * phba) return mbq; } +/** + * lpfc_mbox_cmpl_put: Put mailbox command into mailbox command complete list. + * @phba: pointer to lpfc hba data structure. + * @mbq: pointer to the driver internal queue element for mailbox command. + * + * This routine put the completed mailbox command into the mailbox command + * complete list. This routine is called from driver interrupt handler + * context.The mailbox complete list is used by the driver worker thread + * to process mailbox complete callback functions outside the driver interrupt + * handler. + **/ void lpfc_mbox_cmpl_put(struct lpfc_hba * phba, LPFC_MBOXQ_t * mbq) { @@ -887,6 +1292,17 @@ lpfc_mbox_cmpl_put(struct lpfc_hba * phba, LPFC_MBOXQ_t * mbq) return; } +/** + * lpfc_mbox_tmo_val: Retrieve mailbox command timeout value. + * @phba: pointer to lpfc hba data structure. + * @cmd: mailbox command code. + * + * This routine retrieves the proper timeout value according to the mailbox + * command code. + * + * Return codes + * Timeout value to be used for the given mailbox command + **/ int lpfc_mbox_tmo_val(struct lpfc_hba *phba, int cmd) { diff --git a/drivers/scsi/lpfc/lpfc_mem.c b/drivers/scsi/lpfc/lpfc_mem.c index 3c0cebc7180..a4bba206924 100644 --- a/drivers/scsi/lpfc/lpfc_mem.c +++ b/drivers/scsi/lpfc/lpfc_mem.c @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2004-2006 Emulex. All rights reserved. * + * Copyright (C) 2004-2008 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * Portions Copyright (C) 2004-2005 Christoph Hellwig * @@ -30,6 +30,7 @@ #include "lpfc_hw.h" #include "lpfc_sli.h" +#include "lpfc_nl.h" #include "lpfc_disc.h" #include "lpfc_scsi.h" #include "lpfc.h" @@ -39,7 +40,21 @@ #define LPFC_MEM_POOL_SIZE 64 /* max elem in non-DMA safety pool */ - +/** + * lpfc_mem_alloc: create and allocate all PCI and memory pools + * @phba: HBA to allocate pools for + * + * Description: Creates and allocates PCI pools lpfc_scsi_dma_buf_pool, + * lpfc_mbuf_pool, lpfc_hbq_pool. Creates and allocates kmalloc-backed mempools + * for LPFC_MBOXQ_t and lpfc_nodelist. Also allocates the VPI bitmask. + * + * Notes: Not interrupt-safe. Must be called with no locks held. If any + * allocation fails, frees all successfully allocated memory before returning. + * + * Returns: + * 0 on success + * -ENOMEM on failure (if any memory allocations fail) + **/ int lpfc_mem_alloc(struct lpfc_hba * phba) { @@ -120,6 +135,16 @@ lpfc_mem_alloc(struct lpfc_hba * phba) return -ENOMEM; } +/** + * lpfc_mem_free: Frees all PCI and memory allocated by lpfc_mem_alloc + * @phba: HBA to free memory for + * + * Description: Frees PCI pools lpfc_scsi_dma_buf_pool, lpfc_mbuf_pool, + * lpfc_hbq_pool. Frees kmalloc-backed mempools for LPFC_MBOXQ_t and + * lpfc_nodelist. Also frees the VPI bitmask. + * + * Returns: None + **/ void lpfc_mem_free(struct lpfc_hba * phba) { @@ -181,12 +206,29 @@ lpfc_mem_free(struct lpfc_hba * phba) phba->lpfc_scsi_dma_buf_pool = NULL; phba->lpfc_mbuf_pool = NULL; - /* Free the iocb lookup array */ + /* Free the iocb lookup array */ kfree(psli->iocbq_lookup); psli->iocbq_lookup = NULL; - } +/** + * lpfc_mbuf_alloc: Allocate an mbuf from the lpfc_mbuf_pool PCI pool + * @phba: HBA which owns the pool to allocate from + * @mem_flags: indicates if this is a priority (MEM_PRI) allocation + * @handle: used to return the DMA-mapped address of the mbuf + * + * Description: Allocates a DMA-mapped buffer from the lpfc_mbuf_pool PCI pool. + * Allocates from generic pci_pool_alloc function first and if that fails and + * mem_flags has MEM_PRI set (the only defined flag), returns an mbuf from the + * HBA's pool. + * + * Notes: Not interrupt-safe. Must be called with no locks held. Takes + * phba->hbalock. + * + * Returns: + * pointer to the allocated mbuf on success + * NULL on failure + **/ void * lpfc_mbuf_alloc(struct lpfc_hba *phba, int mem_flags, dma_addr_t *handle) { @@ -206,6 +248,20 @@ lpfc_mbuf_alloc(struct lpfc_hba *phba, int mem_flags, dma_addr_t *handle) return ret; } +/** + * __lpfc_mem_free: Free an mbuf from the lpfc_mbuf_pool PCI pool (locked) + * @phba: HBA which owns the pool to return to + * @virt: mbuf to free + * @dma: the DMA-mapped address of the lpfc_mbuf_pool to be freed + * + * Description: Returns an mbuf lpfc_mbuf_pool to the lpfc_mbuf_safety_pool if + * it is below its max_count, frees the mbuf otherwise. + * + * Notes: Must be called with phba->hbalock held to synchronize access to + * lpfc_mbuf_safety_pool. + * + * Returns: None + **/ void __lpfc_mbuf_free(struct lpfc_hba * phba, void *virt, dma_addr_t dma) { @@ -221,7 +277,21 @@ __lpfc_mbuf_free(struct lpfc_hba * phba, void *virt, dma_addr_t dma) return; } +/** + * lpfc_mem_free: Free an mbuf from the lpfc_mbuf_pool PCI pool (unlocked) + * @phba: HBA which owns the pool to return to + * @virt: mbuf to free + * @dma: the DMA-mapped address of the lpfc_mbuf_pool to be freed + * + * Description: Returns an mbuf lpfc_mbuf_pool to the lpfc_mbuf_safety_pool if + * it is below its max_count, frees the mbuf otherwise. + * + * Notes: Takes phba->hbalock. Can be called with or without other locks held. + * + * Returns: None + **/ void + lpfc_mbuf_free(struct lpfc_hba * phba, void *virt, dma_addr_t dma) { unsigned long iflags; @@ -232,6 +302,19 @@ lpfc_mbuf_free(struct lpfc_hba * phba, void *virt, dma_addr_t dma) return; } +/** + * lpfc_els_hbq_alloc: Allocate an HBQ buffer + * @phba: HBA to allocate HBQ buffer for + * + * Description: Allocates a DMA-mapped HBQ buffer from the lpfc_hbq_pool PCI + * pool along a non-DMA-mapped container for it. + * + * Notes: Not interrupt-safe. Must be called with no locks held. + * + * Returns: + * pointer to HBQ on success + * NULL on failure + **/ struct hbq_dmabuf * lpfc_els_hbq_alloc(struct lpfc_hba *phba) { @@ -251,6 +334,18 @@ lpfc_els_hbq_alloc(struct lpfc_hba *phba) return hbqbp; } +/** + * lpfc_mem_hbq_free: Frees an HBQ buffer allocated with lpfc_els_hbq_alloc + * @phba: HBA buffer was allocated for + * @hbqbp: HBQ container returned by lpfc_els_hbq_alloc + * + * Description: Frees both the container and the DMA-mapped buffer returned by + * lpfc_els_hbq_alloc. + * + * Notes: Can be called with or without locks held. + * + * Returns: None + **/ void lpfc_els_hbq_free(struct lpfc_hba *phba, struct hbq_dmabuf *hbqbp) { @@ -259,7 +354,18 @@ lpfc_els_hbq_free(struct lpfc_hba *phba, struct hbq_dmabuf *hbqbp) return; } -/* This is ONLY called for the LPFC_ELS_HBQ */ +/** + * lpfc_in_buf_free: Free a DMA buffer + * @phba: HBA buffer is associated with + * @mp: Buffer to free + * + * Description: Frees the given DMA buffer in the appropriate way given if the + * HBA is running in SLI3 mode with HBQs enabled. + * + * Notes: Takes phba->hbalock. Can be called with or without other locks held. + * + * Returns: None + **/ void lpfc_in_buf_free(struct lpfc_hba *phba, struct lpfc_dmabuf *mp) { diff --git a/drivers/scsi/lpfc/lpfc_nl.h b/drivers/scsi/lpfc/lpfc_nl.h new file mode 100644 index 00000000000..1accb5a9f4e --- /dev/null +++ b/drivers/scsi/lpfc/lpfc_nl.h @@ -0,0 +1,163 @@ +/******************************************************************* + * This file is part of the Emulex Linux Device Driver for * + * Fibre Channel Host Bus Adapters. * + * Copyright (C) 2008 Emulex. All rights reserved. * + * EMULEX and SLI are trademarks of Emulex. * + * www.emulex.com * + * * + * This program is free software; you can redistribute it and/or * + * modify it under the terms of version 2 of the GNU General * + * Public License as published by the Free Software Foundation. * + * This program is distributed in the hope that it will be useful. * + * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND * + * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, * + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE * + * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD * + * TO BE LEGALLY INVALID. See the GNU General Public License for * + * more details, a copy of which can be found in the file COPYING * + * included with this package. * + *******************************************************************/ + +/* Event definitions for RegisterForEvent */ +#define FC_REG_LINK_EVENT 0x0001 /* link up / down events */ +#define FC_REG_RSCN_EVENT 0x0002 /* RSCN events */ +#define FC_REG_CT_EVENT 0x0004 /* CT request events */ +#define FC_REG_DUMP_EVENT 0x0008 /* Dump events */ +#define FC_REG_TEMPERATURE_EVENT 0x0010 /* temperature events */ +#define FC_REG_ELS_EVENT 0x0020 /* lpfc els events */ +#define FC_REG_FABRIC_EVENT 0x0040 /* lpfc fabric events */ +#define FC_REG_SCSI_EVENT 0x0080 /* lpfc scsi events */ +#define FC_REG_BOARD_EVENT 0x0100 /* lpfc board events */ +#define FC_REG_ADAPTER_EVENT 0x0200 /* lpfc adapter events */ +#define FC_REG_EVENT_MASK (FC_REG_LINK_EVENT | \ + FC_REG_RSCN_EVENT | \ + FC_REG_CT_EVENT | \ + FC_REG_DUMP_EVENT | \ + FC_REG_TEMPERATURE_EVENT | \ + FC_REG_ELS_EVENT | \ + FC_REG_FABRIC_EVENT | \ + FC_REG_SCSI_EVENT | \ + FC_REG_BOARD_EVENT | \ + FC_REG_ADAPTER_EVENT) +/* Temperature events */ +#define LPFC_CRIT_TEMP 0x1 +#define LPFC_THRESHOLD_TEMP 0x2 +#define LPFC_NORMAL_TEMP 0x3 +/* + * All net link event payloads will begin with and event type + * and subcategory. The event type must come first. + * The subcategory further defines the data that follows in the rest + * of the payload. Each category will have its own unique header plus + * any addtional data unique to the subcategory. + * The payload sent via the fc transport is one-way driver->application. + */ + +/* els event header */ +struct lpfc_els_event_header { + uint32_t event_type; + uint32_t subcategory; + uint8_t wwpn[8]; + uint8_t wwnn[8]; +}; + +/* subcategory codes for FC_REG_ELS_EVENT */ +#define LPFC_EVENT_PLOGI_RCV 0x01 +#define LPFC_EVENT_PRLO_RCV 0x02 +#define LPFC_EVENT_ADISC_RCV 0x04 +#define LPFC_EVENT_LSRJT_RCV 0x08 + +/* special els lsrjt event */ +struct lpfc_lsrjt_event { + struct lpfc_els_event_header header; + uint32_t command; + uint32_t reason_code; + uint32_t explanation; +}; + + +/* fabric event header */ +struct lpfc_fabric_event_header { + uint32_t event_type; + uint32_t subcategory; + uint8_t wwpn[8]; + uint8_t wwnn[8]; +}; + +/* subcategory codes for FC_REG_FABRIC_EVENT */ +#define LPFC_EVENT_FABRIC_BUSY 0x01 +#define LPFC_EVENT_PORT_BUSY 0x02 +#define LPFC_EVENT_FCPRDCHKERR 0x04 + +/* special case fabric fcprdchkerr event */ +struct lpfc_fcprdchkerr_event { + struct lpfc_fabric_event_header header; + uint32_t lun; + uint32_t opcode; + uint32_t fcpiparam; +}; + + +/* scsi event header */ +struct lpfc_scsi_event_header { + uint32_t event_type; + uint32_t subcategory; + uint32_t lun; + uint8_t wwpn[8]; + uint8_t wwnn[8]; +}; + +/* subcategory codes for FC_REG_SCSI_EVENT */ +#define LPFC_EVENT_QFULL 0x0001 +#define LPFC_EVENT_DEVBSY 0x0002 +#define LPFC_EVENT_CHECK_COND 0x0004 +#define LPFC_EVENT_LUNRESET 0x0008 +#define LPFC_EVENT_TGTRESET 0x0010 +#define LPFC_EVENT_BUSRESET 0x0020 +#define LPFC_EVENT_VARQUEDEPTH 0x0040 + +/* special case scsi varqueuedepth event */ +struct lpfc_scsi_varqueuedepth_event { + struct lpfc_scsi_event_header scsi_event; + uint32_t oldval; + uint32_t newval; +}; + +/* special case scsi check condition event */ +struct lpfc_scsi_check_condition_event { + struct lpfc_scsi_event_header scsi_event; + uint8_t sense_key; + uint8_t asc; + uint8_t ascq; +}; + +/* event codes for FC_REG_BOARD_EVENT */ +#define LPFC_EVENT_PORTINTERR 0x01 + +/* board event header */ +struct lpfc_board_event_header { + uint32_t event_type; + uint32_t subcategory; +}; + + +/* event codes for FC_REG_ADAPTER_EVENT */ +#define LPFC_EVENT_ARRIVAL 0x01 + +/* adapter event header */ +struct lpfc_adapter_event_header { + uint32_t event_type; + uint32_t subcategory; +}; + + +/* event codes for temp_event */ +#define LPFC_CRIT_TEMP 0x1 +#define LPFC_THRESHOLD_TEMP 0x2 +#define LPFC_NORMAL_TEMP 0x3 + +struct temp_event { + uint32_t event_type; + uint32_t event_code; + uint32_t data; +}; + diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c index 6688a8689b5..0c25d97acb4 100644 --- a/drivers/scsi/lpfc/lpfc_nportdisc.c +++ b/drivers/scsi/lpfc/lpfc_nportdisc.c @@ -30,6 +30,7 @@ #include "lpfc_hw.h" #include "lpfc_sli.h" +#include "lpfc_nl.h" #include "lpfc_disc.h" #include "lpfc_scsi.h" #include "lpfc.h" @@ -1003,20 +1004,8 @@ lpfc_rcv_plogi_adisc_issue(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, spin_lock_irq(shost->host_lock); ndlp->nlp_flag &= ~NLP_NPR_2B_DISC; spin_unlock_irq(shost->host_lock); - - if (vport->num_disc_nodes) { + if (vport->num_disc_nodes) lpfc_more_adisc(vport); - if ((vport->num_disc_nodes == 0) && - (vport->fc_npr_cnt)) - lpfc_els_disc_plogi(vport); - if (vport->num_disc_nodes == 0) { - spin_lock_irq(shost->host_lock); - vport->fc_flag &= ~FC_NDISC_ACTIVE; - spin_unlock_irq(shost->host_lock); - lpfc_can_disctmo(vport); - lpfc_end_rscn(vport); - } - } } return ndlp->nlp_state; } @@ -1865,8 +1854,13 @@ static uint32_t lpfc_cmpl_logo_npr_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, void *arg, uint32_t evt) { + struct Scsi_Host *shost = lpfc_shost_from_vport(vport); + if (ndlp->nlp_DID == Fabric_DID) { + spin_lock_irq(shost->host_lock); + vport->fc_flag &= ~(FC_FABRIC | FC_PUBLIC_LOOP); + spin_unlock_irq(shost->host_lock); + } lpfc_unreg_rpi(vport, ndlp); - /* This routine does nothing, just return the current state */ return ndlp->nlp_state; } @@ -2155,7 +2149,7 @@ lpfc_disc_state_machine(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, lpfc_nlp_put(ndlp); } else { lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY, - "0212 DSM out state %d on NPort free\n", rc); + "0213 DSM out state %d on NPort free\n", rc); lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_DSM, "DSM out: ste:%d did:x%x flg:x%x", diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index 1bcebbd3dfa..bd186741182 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -32,6 +32,7 @@ #include "lpfc_version.h" #include "lpfc_hw.h" #include "lpfc_sli.h" +#include "lpfc_nl.h" #include "lpfc_disc.h" #include "lpfc_scsi.h" #include "lpfc.h" @@ -42,6 +43,111 @@ #define LPFC_RESET_WAIT 2 #define LPFC_ABORT_WAIT 2 +/** + * lpfc_update_stats: Update statistical data for the command completion. + * @phba: Pointer to HBA object. + * @lpfc_cmd: lpfc scsi command object pointer. + * + * This function is called when there is a command completion and this + * function updates the statistical data for the command completion. + **/ +static void +lpfc_update_stats(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) +{ + struct lpfc_rport_data *rdata = lpfc_cmd->rdata; + struct lpfc_nodelist *pnode = rdata->pnode; + struct scsi_cmnd *cmd = lpfc_cmd->pCmd; + unsigned long flags; + struct Scsi_Host *shost = cmd->device->host; + struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; + unsigned long latency; + int i; + + if (cmd->result) + return; + + spin_lock_irqsave(shost->host_lock, flags); + if (!vport->stat_data_enabled || + vport->stat_data_blocked || + !pnode->lat_data || + (phba->bucket_type == LPFC_NO_BUCKET)) { + spin_unlock_irqrestore(shost->host_lock, flags); + return; + } + latency = jiffies_to_msecs(jiffies - lpfc_cmd->start_time); + + if (phba->bucket_type == LPFC_LINEAR_BUCKET) { + i = (latency + phba->bucket_step - 1 - phba->bucket_base)/ + phba->bucket_step; + if (i >= LPFC_MAX_BUCKET_COUNT) + i = LPFC_MAX_BUCKET_COUNT; + } else { + for (i = 0; i < LPFC_MAX_BUCKET_COUNT-1; i++) + if (latency <= (phba->bucket_base + + ((1<<i)*phba->bucket_step))) + break; + } + + pnode->lat_data[i].cmd_count++; + spin_unlock_irqrestore(shost->host_lock, flags); +} + + +/** + * lpfc_send_sdev_queuedepth_change_event: Posts a queuedepth change + * event. + * @phba: Pointer to HBA context object. + * @vport: Pointer to vport object. + * @ndlp: Pointer to FC node associated with the target. + * @lun: Lun number of the scsi device. + * @old_val: Old value of the queue depth. + * @new_val: New value of the queue depth. + * + * This function sends an event to the mgmt application indicating + * there is a change in the scsi device queue depth. + **/ +static void +lpfc_send_sdev_queuedepth_change_event(struct lpfc_hba *phba, + struct lpfc_vport *vport, + struct lpfc_nodelist *ndlp, + uint32_t lun, + uint32_t old_val, + uint32_t new_val) +{ + struct lpfc_fast_path_event *fast_path_evt; + unsigned long flags; + + fast_path_evt = lpfc_alloc_fast_evt(phba); + if (!fast_path_evt) + return; + + fast_path_evt->un.queue_depth_evt.scsi_event.event_type = + FC_REG_SCSI_EVENT; + fast_path_evt->un.queue_depth_evt.scsi_event.subcategory = + LPFC_EVENT_VARQUEDEPTH; + + /* Report all luns with change in queue depth */ + fast_path_evt->un.queue_depth_evt.scsi_event.lun = lun; + if (ndlp && NLP_CHK_NODE_ACT(ndlp)) { + memcpy(&fast_path_evt->un.queue_depth_evt.scsi_event.wwpn, + &ndlp->nlp_portname, sizeof(struct lpfc_name)); + memcpy(&fast_path_evt->un.queue_depth_evt.scsi_event.wwnn, + &ndlp->nlp_nodename, sizeof(struct lpfc_name)); + } + + fast_path_evt->un.queue_depth_evt.oldval = old_val; + fast_path_evt->un.queue_depth_evt.newval = new_val; + fast_path_evt->vport = vport; + + fast_path_evt->work_evt.evt = LPFC_EVT_FASTPATH_MGMT_EVT; + spin_lock_irqsave(&phba->hbalock, flags); + list_add_tail(&fast_path_evt->work_evt.evt_listp, &phba->work_list); + spin_unlock_irqrestore(&phba->hbalock, flags); + lpfc_worker_wake_up(phba); + + return; +} + /* * This function is called with no lock held when there is a resource * error in driver or in firmware. @@ -117,9 +223,10 @@ lpfc_ramp_down_queue_handler(struct lpfc_hba *phba) struct lpfc_vport **vports; struct Scsi_Host *shost; struct scsi_device *sdev; - unsigned long new_queue_depth; + unsigned long new_queue_depth, old_queue_depth; unsigned long num_rsrc_err, num_cmd_success; int i; + struct lpfc_rport_data *rdata; num_rsrc_err = atomic_read(&phba->num_rsrc_err); num_cmd_success = atomic_read(&phba->num_cmd_success); @@ -137,6 +244,7 @@ lpfc_ramp_down_queue_handler(struct lpfc_hba *phba) else new_queue_depth = sdev->queue_depth - new_queue_depth; + old_queue_depth = sdev->queue_depth; if (sdev->ordered_tags) scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG, @@ -145,6 +253,13 @@ lpfc_ramp_down_queue_handler(struct lpfc_hba *phba) scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, new_queue_depth); + rdata = sdev->hostdata; + if (rdata) + lpfc_send_sdev_queuedepth_change_event( + phba, vports[i], + rdata->pnode, + sdev->lun, old_queue_depth, + new_queue_depth); } } lpfc_destroy_vport_work_array(phba, vports); @@ -159,6 +274,7 @@ lpfc_ramp_up_queue_handler(struct lpfc_hba *phba) struct Scsi_Host *shost; struct scsi_device *sdev; int i; + struct lpfc_rport_data *rdata; vports = lpfc_create_vport_work_array(phba); if (vports != NULL) @@ -176,6 +292,14 @@ lpfc_ramp_up_queue_handler(struct lpfc_hba *phba) scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, sdev->queue_depth+1); + rdata = sdev->hostdata; + if (rdata) + lpfc_send_sdev_queuedepth_change_event( + phba, vports[i], + rdata->pnode, + sdev->lun, + sdev->queue_depth - 1, + sdev->queue_depth); } } lpfc_destroy_vport_work_array(phba, vports); @@ -183,6 +307,35 @@ lpfc_ramp_up_queue_handler(struct lpfc_hba *phba) atomic_set(&phba->num_cmd_success, 0); } +/** + * lpfc_scsi_dev_block: set all scsi hosts to block state. + * @phba: Pointer to HBA context object. + * + * This function walks vport list and set each SCSI host to block state + * by invoking fc_remote_port_delete() routine. This function is invoked + * with EEH when device's PCI slot has been permanently disabled. + **/ +void +lpfc_scsi_dev_block(struct lpfc_hba *phba) +{ + struct lpfc_vport **vports; + struct Scsi_Host *shost; + struct scsi_device *sdev; + struct fc_rport *rport; + int i; + + vports = lpfc_create_vport_work_array(phba); + if (vports != NULL) + for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) { + shost = lpfc_shost_from_vport(vports[i]); + shost_for_each_device(sdev, shost) { + rport = starget_to_rport(scsi_target(sdev)); + fc_remote_port_delete(rport); + } + } + lpfc_destroy_vport_work_array(phba, vports); +} + /* * This routine allocates a scsi buffer, which contains all the necessary * information needed to initiate a SCSI I/O. The non-DMAable buffer region @@ -198,7 +351,9 @@ lpfc_new_scsi_buf(struct lpfc_vport *vport) struct lpfc_scsi_buf *psb; struct ulp_bde64 *bpl; IOCB_t *iocb; - dma_addr_t pdma_phys; + dma_addr_t pdma_phys_fcp_cmd; + dma_addr_t pdma_phys_fcp_rsp; + dma_addr_t pdma_phys_bpl; uint16_t iotag; psb = kzalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL); @@ -238,40 +393,60 @@ lpfc_new_scsi_buf(struct lpfc_vport *vport) /* Initialize local short-hand pointers. */ bpl = psb->fcp_bpl; - pdma_phys = psb->dma_handle; + pdma_phys_fcp_cmd = psb->dma_handle; + pdma_phys_fcp_rsp = psb->dma_handle + sizeof(struct fcp_cmnd); + pdma_phys_bpl = psb->dma_handle + sizeof(struct fcp_cmnd) + + sizeof(struct fcp_rsp); /* * The first two bdes are the FCP_CMD and FCP_RSP. The balance are sg * list bdes. Initialize the first two and leave the rest for * queuecommand. */ - bpl->addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys)); - bpl->addrLow = le32_to_cpu(putPaddrLow(pdma_phys)); - bpl->tus.f.bdeSize = sizeof (struct fcp_cmnd); - bpl->tus.f.bdeFlags = BUFF_USE_CMND; - bpl->tus.w = le32_to_cpu(bpl->tus.w); - bpl++; + bpl[0].addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys_fcp_cmd)); + bpl[0].addrLow = le32_to_cpu(putPaddrLow(pdma_phys_fcp_cmd)); + bpl[0].tus.f.bdeSize = sizeof(struct fcp_cmnd); + bpl[0].tus.f.bdeFlags = BUFF_TYPE_BDE_64; + bpl[0].tus.w = le32_to_cpu(bpl->tus.w); /* Setup the physical region for the FCP RSP */ - pdma_phys += sizeof (struct fcp_cmnd); - bpl->addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys)); - bpl->addrLow = le32_to_cpu(putPaddrLow(pdma_phys)); - bpl->tus.f.bdeSize = sizeof (struct fcp_rsp); - bpl->tus.f.bdeFlags = (BUFF_USE_CMND | BUFF_USE_RCV); - bpl->tus.w = le32_to_cpu(bpl->tus.w); + bpl[1].addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys_fcp_rsp)); + bpl[1].addrLow = le32_to_cpu(putPaddrLow(pdma_phys_fcp_rsp)); + bpl[1].tus.f.bdeSize = sizeof(struct fcp_rsp); + bpl[1].tus.f.bdeFlags = BUFF_TYPE_BDE_64; + bpl[1].tus.w = le32_to_cpu(bpl->tus.w); /* * Since the IOCB for the FCP I/O is built into this lpfc_scsi_buf, * initialize it with all known data now. */ - pdma_phys += (sizeof (struct fcp_rsp)); iocb = &psb->cur_iocbq.iocb; iocb->un.fcpi64.bdl.ulpIoTag32 = 0; - iocb->un.fcpi64.bdl.addrHigh = putPaddrHigh(pdma_phys); - iocb->un.fcpi64.bdl.addrLow = putPaddrLow(pdma_phys); - iocb->un.fcpi64.bdl.bdeSize = (2 * sizeof (struct ulp_bde64)); - iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BDL; - iocb->ulpBdeCount = 1; + if (phba->sli_rev == 3) { + /* fill in immediate fcp command BDE */ + iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BDE_IMMED; + iocb->un.fcpi64.bdl.bdeSize = sizeof(struct fcp_cmnd); + iocb->un.fcpi64.bdl.addrLow = offsetof(IOCB_t, + unsli3.fcp_ext.icd); + iocb->un.fcpi64.bdl.addrHigh = 0; + iocb->ulpBdeCount = 0; + iocb->ulpLe = 0; + /* fill in responce BDE */ + iocb->unsli3.fcp_ext.rbde.tus.f.bdeFlags = BUFF_TYPE_BDE_64; + iocb->unsli3.fcp_ext.rbde.tus.f.bdeSize = + sizeof(struct fcp_rsp); + iocb->unsli3.fcp_ext.rbde.addrLow = + putPaddrLow(pdma_phys_fcp_rsp); + iocb->unsli3.fcp_ext.rbde.addrHigh = + putPaddrHigh(pdma_phys_fcp_rsp); + } else { + iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BLP_64; + iocb->un.fcpi64.bdl.bdeSize = (2 * sizeof(struct ulp_bde64)); + iocb->un.fcpi64.bdl.addrLow = putPaddrLow(pdma_phys_bpl); + iocb->un.fcpi64.bdl.addrHigh = putPaddrHigh(pdma_phys_bpl); + iocb->ulpBdeCount = 1; + iocb->ulpLe = 1; + } iocb->ulpClass = CLASS3; return psb; @@ -313,8 +488,9 @@ lpfc_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd; struct ulp_bde64 *bpl = lpfc_cmd->fcp_bpl; IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb; + struct ulp_bde64 *data_bde = iocb_cmd->unsli3.fcp_ext.dbde; dma_addr_t physaddr; - uint32_t i, num_bde = 0; + uint32_t num_bde = 0; int nseg, datadir = scsi_cmnd->sc_data_direction; /* @@ -352,37 +528,159 @@ lpfc_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) * during probe that limits the number of sg elements in any * single scsi command. Just run through the seg_cnt and format * the bde's. + * When using SLI-3 the driver will try to fit all the BDEs into + * the IOCB. If it can't then the BDEs get added to a BPL as it + * does for SLI-2 mode. */ - scsi_for_each_sg(scsi_cmnd, sgel, nseg, i) { + scsi_for_each_sg(scsi_cmnd, sgel, nseg, num_bde) { physaddr = sg_dma_address(sgel); - bpl->addrLow = le32_to_cpu(putPaddrLow(physaddr)); - bpl->addrHigh = le32_to_cpu(putPaddrHigh(physaddr)); - bpl->tus.f.bdeSize = sg_dma_len(sgel); - if (datadir == DMA_TO_DEVICE) - bpl->tus.f.bdeFlags = 0; - else - bpl->tus.f.bdeFlags = BUFF_USE_RCV; - bpl->tus.w = le32_to_cpu(bpl->tus.w); - bpl++; - num_bde++; + if (phba->sli_rev == 3 && + nseg <= LPFC_EXT_DATA_BDE_COUNT) { + data_bde->tus.f.bdeFlags = BUFF_TYPE_BDE_64; + data_bde->tus.f.bdeSize = sg_dma_len(sgel); + data_bde->addrLow = putPaddrLow(physaddr); + data_bde->addrHigh = putPaddrHigh(physaddr); + data_bde++; + } else { + bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64; + bpl->tus.f.bdeSize = sg_dma_len(sgel); + bpl->tus.w = le32_to_cpu(bpl->tus.w); + bpl->addrLow = + le32_to_cpu(putPaddrLow(physaddr)); + bpl->addrHigh = + le32_to_cpu(putPaddrHigh(physaddr)); + bpl++; + } } } /* * Finish initializing those IOCB fields that are dependent on the - * scsi_cmnd request_buffer. Note that the bdeSize is explicitly - * reinitialized since all iocb memory resources are used many times - * for transmit, receive, and continuation bpl's. + * scsi_cmnd request_buffer. Note that for SLI-2 the bdeSize is + * explicitly reinitialized and for SLI-3 the extended bde count is + * explicitly reinitialized since all iocb memory resources are reused. */ - iocb_cmd->un.fcpi64.bdl.bdeSize = (2 * sizeof (struct ulp_bde64)); - iocb_cmd->un.fcpi64.bdl.bdeSize += - (num_bde * sizeof (struct ulp_bde64)); - iocb_cmd->ulpBdeCount = 1; - iocb_cmd->ulpLe = 1; + if (phba->sli_rev == 3) { + if (num_bde > LPFC_EXT_DATA_BDE_COUNT) { + /* + * The extended IOCB format can only fit 3 BDE or a BPL. + * This I/O has more than 3 BDE so the 1st data bde will + * be a BPL that is filled in here. + */ + physaddr = lpfc_cmd->dma_handle; + data_bde->tus.f.bdeFlags = BUFF_TYPE_BLP_64; + data_bde->tus.f.bdeSize = (num_bde * + sizeof(struct ulp_bde64)); + physaddr += (sizeof(struct fcp_cmnd) + + sizeof(struct fcp_rsp) + + (2 * sizeof(struct ulp_bde64))); + data_bde->addrHigh = putPaddrHigh(physaddr); + data_bde->addrLow = putPaddrLow(physaddr); + /* ebde count includes the responce bde and data bpl */ + iocb_cmd->unsli3.fcp_ext.ebde_count = 2; + } else { + /* ebde count includes the responce bde and data bdes */ + iocb_cmd->unsli3.fcp_ext.ebde_count = (num_bde + 1); + } + } else { + iocb_cmd->un.fcpi64.bdl.bdeSize = + ((num_bde + 2) * sizeof(struct ulp_bde64)); + } fcp_cmnd->fcpDl = cpu_to_be32(scsi_bufflen(scsi_cmnd)); return 0; } +/** + * lpfc_send_scsi_error_event: Posts an event when there is SCSI error. + * @phba: Pointer to hba context object. + * @vport: Pointer to vport object. + * @lpfc_cmd: Pointer to lpfc scsi command which reported the error. + * @rsp_iocb: Pointer to response iocb object which reported error. + * + * This function posts an event when there is a SCSI command reporting + * error from the scsi device. + **/ +static void +lpfc_send_scsi_error_event(struct lpfc_hba *phba, struct lpfc_vport *vport, + struct lpfc_scsi_buf *lpfc_cmd, struct lpfc_iocbq *rsp_iocb) { + struct scsi_cmnd *cmnd = lpfc_cmd->pCmd; + struct fcp_rsp *fcprsp = lpfc_cmd->fcp_rsp; + uint32_t resp_info = fcprsp->rspStatus2; + uint32_t scsi_status = fcprsp->rspStatus3; + uint32_t fcpi_parm = rsp_iocb->iocb.un.fcpi.fcpi_parm; + struct lpfc_fast_path_event *fast_path_evt = NULL; + struct lpfc_nodelist *pnode = lpfc_cmd->rdata->pnode; + unsigned long flags; + + /* If there is queuefull or busy condition send a scsi event */ + if ((cmnd->result == SAM_STAT_TASK_SET_FULL) || + (cmnd->result == SAM_STAT_BUSY)) { + fast_path_evt = lpfc_alloc_fast_evt(phba); + if (!fast_path_evt) + return; + fast_path_evt->un.scsi_evt.event_type = + FC_REG_SCSI_EVENT; + fast_path_evt->un.scsi_evt.subcategory = + (cmnd->result == SAM_STAT_TASK_SET_FULL) ? + LPFC_EVENT_QFULL : LPFC_EVENT_DEVBSY; + fast_path_evt->un.scsi_evt.lun = cmnd->device->lun; + memcpy(&fast_path_evt->un.scsi_evt.wwpn, + &pnode->nlp_portname, sizeof(struct lpfc_name)); + memcpy(&fast_path_evt->un.scsi_evt.wwnn, + &pnode->nlp_nodename, sizeof(struct lpfc_name)); + } else if ((resp_info & SNS_LEN_VALID) && fcprsp->rspSnsLen && + ((cmnd->cmnd[0] == READ_10) || (cmnd->cmnd[0] == WRITE_10))) { + fast_path_evt = lpfc_alloc_fast_evt(phba); + if (!fast_path_evt) + return; + fast_path_evt->un.check_cond_evt.scsi_event.event_type = + FC_REG_SCSI_EVENT; + fast_path_evt->un.check_cond_evt.scsi_event.subcategory = + LPFC_EVENT_CHECK_COND; + fast_path_evt->un.check_cond_evt.scsi_event.lun = + cmnd->device->lun; + memcpy(&fast_path_evt->un.check_cond_evt.scsi_event.wwpn, + &pnode->nlp_portname, sizeof(struct lpfc_name)); + memcpy(&fast_path_evt->un.check_cond_evt.scsi_event.wwnn, + &pnode->nlp_nodename, sizeof(struct lpfc_name)); + fast_path_evt->un.check_cond_evt.sense_key = + cmnd->sense_buffer[2] & 0xf; + fast_path_evt->un.check_cond_evt.asc = cmnd->sense_buffer[12]; + fast_path_evt->un.check_cond_evt.ascq = cmnd->sense_buffer[13]; + } else if ((cmnd->sc_data_direction == DMA_FROM_DEVICE) && + fcpi_parm && + ((be32_to_cpu(fcprsp->rspResId) != fcpi_parm) || + ((scsi_status == SAM_STAT_GOOD) && + !(resp_info & (RESID_UNDER | RESID_OVER))))) { + /* + * If status is good or resid does not match with fcp_param and + * there is valid fcpi_parm, then there is a read_check error + */ + fast_path_evt = lpfc_alloc_fast_evt(phba); + if (!fast_path_evt) + return; + fast_path_evt->un.read_check_error.header.event_type = + FC_REG_FABRIC_EVENT; + fast_path_evt->un.read_check_error.header.subcategory = + LPFC_EVENT_FCPRDCHKERR; + memcpy(&fast_path_evt->un.read_check_error.header.wwpn, + &pnode->nlp_portname, sizeof(struct lpfc_name)); + memcpy(&fast_path_evt->un.read_check_error.header.wwnn, + &pnode->nlp_nodename, sizeof(struct lpfc_name)); + fast_path_evt->un.read_check_error.lun = cmnd->device->lun; + fast_path_evt->un.read_check_error.opcode = cmnd->cmnd[0]; + fast_path_evt->un.read_check_error.fcpiparam = + fcpi_parm; + } else + return; + + fast_path_evt->vport = vport; + spin_lock_irqsave(&phba->hbalock, flags); + list_add_tail(&fast_path_evt->work_evt.evt_listp, &phba->work_list); + spin_unlock_irqrestore(&phba->hbalock, flags); + lpfc_worker_wake_up(phba); + return; +} static void lpfc_scsi_unprep_dma_buf(struct lpfc_hba * phba, struct lpfc_scsi_buf * psb) { @@ -411,6 +709,7 @@ lpfc_handle_fcp_err(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd, uint32_t rsplen = 0; uint32_t logit = LOG_FCP | LOG_FCP_ERROR; + /* * If this is a task management command, there is no * scsi packet associated with this lpfc_cmd. The driver @@ -526,6 +825,7 @@ lpfc_handle_fcp_err(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd, out: cmnd->result = ScsiResult(host_status, scsi_status); + lpfc_send_scsi_error_event(vport->phba, vport, lpfc_cmd, rsp_iocb); } static void @@ -542,9 +842,11 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, struct scsi_device *sdev, *tmp_sdev; int depth = 0; unsigned long flags; + struct lpfc_fast_path_event *fast_path_evt; lpfc_cmd->result = pIocbOut->iocb.un.ulpWord[4]; lpfc_cmd->status = pIocbOut->iocb.ulpStatus; + atomic_dec(&pnode->cmd_pending); if (lpfc_cmd->status) { if (lpfc_cmd->status == IOSTAT_LOCAL_REJECT && @@ -570,12 +872,36 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, break; case IOSTAT_NPORT_BSY: case IOSTAT_FABRIC_BSY: - cmd->result = ScsiResult(DID_BUS_BUSY, 0); + cmd->result = ScsiResult(DID_TRANSPORT_DISRUPTED, 0); + fast_path_evt = lpfc_alloc_fast_evt(phba); + if (!fast_path_evt) + break; + fast_path_evt->un.fabric_evt.event_type = + FC_REG_FABRIC_EVENT; + fast_path_evt->un.fabric_evt.subcategory = + (lpfc_cmd->status == IOSTAT_NPORT_BSY) ? + LPFC_EVENT_PORT_BUSY : LPFC_EVENT_FABRIC_BUSY; + if (pnode && NLP_CHK_NODE_ACT(pnode)) { + memcpy(&fast_path_evt->un.fabric_evt.wwpn, + &pnode->nlp_portname, + sizeof(struct lpfc_name)); + memcpy(&fast_path_evt->un.fabric_evt.wwnn, + &pnode->nlp_nodename, + sizeof(struct lpfc_name)); + } + fast_path_evt->vport = vport; + fast_path_evt->work_evt.evt = + LPFC_EVT_FASTPATH_MGMT_EVT; + spin_lock_irqsave(&phba->hbalock, flags); + list_add_tail(&fast_path_evt->work_evt.evt_listp, + &phba->work_list); + spin_unlock_irqrestore(&phba->hbalock, flags); + lpfc_worker_wake_up(phba); break; case IOSTAT_LOCAL_REJECT: - if (lpfc_cmd->result == RJT_UNAVAIL_PERM || + if (lpfc_cmd->result == IOERR_INVALID_RPI || lpfc_cmd->result == IOERR_NO_RESOURCES || - lpfc_cmd->result == RJT_LOGIN_REQUIRED) { + lpfc_cmd->result == IOERR_ABORT_REQUESTED) { cmd->result = ScsiResult(DID_REQUEUE, 0); break; } /* else: fall through */ @@ -586,7 +912,8 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, if (!pnode || !NLP_CHK_NODE_ACT(pnode) || (pnode->nlp_state != NLP_STE_MAPPED_NODE)) - cmd->result = ScsiResult(DID_BUS_BUSY, SAM_STAT_BUSY); + cmd->result = ScsiResult(DID_TRANSPORT_DISRUPTED, + SAM_STAT_BUSY); } else { cmd->result = ScsiResult(DID_OK, 0); } @@ -602,8 +929,32 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, scsi_get_resid(cmd)); } + lpfc_update_stats(phba, lpfc_cmd); result = cmd->result; sdev = cmd->device; + if (vport->cfg_max_scsicmpl_time && + time_after(jiffies, lpfc_cmd->start_time + + msecs_to_jiffies(vport->cfg_max_scsicmpl_time))) { + spin_lock_irqsave(sdev->host->host_lock, flags); + if ((pnode->cmd_qdepth > atomic_read(&pnode->cmd_pending) && + (atomic_read(&pnode->cmd_pending) > LPFC_MIN_TGT_QDEPTH) && + ((cmd->cmnd[0] == READ_10) || (cmd->cmnd[0] == WRITE_10)))) + pnode->cmd_qdepth = atomic_read(&pnode->cmd_pending); + + pnode->last_change_time = jiffies; + spin_unlock_irqrestore(sdev->host->host_lock, flags); + } else if ((pnode->cmd_qdepth < LPFC_MAX_TGT_QDEPTH) && + time_after(jiffies, pnode->last_change_time + + msecs_to_jiffies(LPFC_TGTQ_INTERVAL))) { + spin_lock_irqsave(sdev->host->host_lock, flags); + pnode->cmd_qdepth += pnode->cmd_qdepth * + LPFC_TGTQ_RAMPUP_PCENT / 100; + if (pnode->cmd_qdepth > LPFC_MAX_TGT_QDEPTH) + pnode->cmd_qdepth = LPFC_MAX_TGT_QDEPTH; + pnode->last_change_time = jiffies; + spin_unlock_irqrestore(sdev->host->host_lock, flags); + } + lpfc_scsi_unprep_dma_buf(phba, lpfc_cmd); cmd->scsi_done(cmd); @@ -647,6 +998,9 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, pnode->last_ramp_up_time = jiffies; } } + lpfc_send_sdev_queuedepth_change_event(phba, vport, pnode, + 0xFFFFFFFF, + sdev->queue_depth - 1, sdev->queue_depth); } /* @@ -676,6 +1030,9 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP, "0711 detected queue full - lun queue " "depth adjusted to %d.\n", depth); + lpfc_send_sdev_queuedepth_change_event(phba, vport, + pnode, 0xFFFFFFFF, + depth+1, depth); } } @@ -692,6 +1049,24 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, lpfc_release_scsi_buf(phba, lpfc_cmd); } +/** + * lpfc_fcpcmd_to_iocb - copy the fcp_cmd data into the IOCB. + * @data: A pointer to the immediate command data portion of the IOCB. + * @fcp_cmnd: The FCP Command that is provided by the SCSI layer. + * + * The routine copies the entire FCP command from @fcp_cmnd to @data while + * byte swapping the data to big endian format for transmission on the wire. + **/ +static void +lpfc_fcpcmd_to_iocb(uint8_t *data, struct fcp_cmnd *fcp_cmnd) +{ + int i, j; + for (i = 0, j = 0; i < sizeof(struct fcp_cmnd); + i += sizeof(uint32_t), j++) { + ((uint32_t *)data)[j] = cpu_to_be32(((uint32_t *)fcp_cmnd)[j]); + } +} + static void lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd, struct lpfc_nodelist *pnode) @@ -758,7 +1133,8 @@ lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd, fcp_cmnd->fcpCntl3 = 0; phba->fc4ControlRequests++; } - + if (phba->sli_rev == 3) + lpfc_fcpcmd_to_iocb(iocb_cmd->unsli3.fcp_ext.icd, fcp_cmnd); /* * Finish initializing those IOCB fields that are independent * of the scsi_cmnd request_buffer @@ -798,11 +1174,13 @@ lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_vport *vport, piocb = &piocbq->iocb; fcp_cmnd = lpfc_cmd->fcp_cmnd; - int_to_scsilun(lun, &lpfc_cmd->fcp_cmnd->fcp_lun); + /* Clear out any old data in the FCP command area */ + memset(fcp_cmnd, 0, sizeof(struct fcp_cmnd)); + int_to_scsilun(lun, &fcp_cmnd->fcp_lun); fcp_cmnd->fcpCntl2 = task_mgmt_cmd; - + if (vport->phba->sli_rev == 3) + lpfc_fcpcmd_to_iocb(piocb->unsli3.fcp_ext.icd, fcp_cmnd); piocb->ulpCommand = CMD_FCP_ICMND64_CR; - piocb->ulpContext = ndlp->nlp_rpi; if (ndlp->nlp_fcp_info & NLP_FCP_2_DEVICE) { piocb->ulpFCP2Rcvy = 1; @@ -967,9 +1345,12 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *)) * transport is still transitioning. */ if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) { - cmnd->result = ScsiResult(DID_BUS_BUSY, 0); + cmnd->result = ScsiResult(DID_TRANSPORT_DISRUPTED, 0); goto out_fail_command; } + if (atomic_read(&ndlp->cmd_pending) >= ndlp->cmd_qdepth) + goto out_host_busy; + lpfc_cmd = lpfc_get_scsi_buf(phba); if (lpfc_cmd == NULL) { lpfc_adjust_queue_depth(phba); @@ -980,6 +1361,7 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *)) goto out_host_busy; } + lpfc_cmd->start_time = jiffies; /* * Store the midlayer's command structure for the completion phase * and complete the command initialization. @@ -987,6 +1369,7 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *)) lpfc_cmd->pCmd = cmnd; lpfc_cmd->rdata = rdata; lpfc_cmd->timeout = 0; + lpfc_cmd->start_time = jiffies; cmnd->host_scribble = (unsigned char *)lpfc_cmd; cmnd->scsi_done = done; @@ -996,6 +1379,7 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *)) lpfc_scsi_prep_cmnd(vport, lpfc_cmd, ndlp); + atomic_inc(&ndlp->cmd_pending); err = lpfc_sli_issue_iocb(phba, &phba->sli.ring[psli->fcp_ring], &lpfc_cmd->cur_iocbq, SLI_IOCB_RET_IOCB); if (err) @@ -1010,6 +1394,7 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *)) return 0; out_host_busy_free_buf: + atomic_dec(&ndlp->cmd_pending); lpfc_scsi_unprep_dma_buf(phba, lpfc_cmd); lpfc_release_scsi_buf(phba, lpfc_cmd); out_host_busy: @@ -1145,6 +1530,7 @@ lpfc_device_reset_handler(struct scsi_cmnd *cmnd) int ret = SUCCESS; int status; int cnt; + struct lpfc_scsi_event_header scsi_event; lpfc_block_error_handler(cmnd); /* @@ -1163,6 +1549,19 @@ lpfc_device_reset_handler(struct scsi_cmnd *cmnd) break; pnode = rdata->pnode; } + + scsi_event.event_type = FC_REG_SCSI_EVENT; + scsi_event.subcategory = LPFC_EVENT_TGTRESET; + scsi_event.lun = 0; + memcpy(scsi_event.wwpn, &pnode->nlp_portname, sizeof(struct lpfc_name)); + memcpy(scsi_event.wwnn, &pnode->nlp_nodename, sizeof(struct lpfc_name)); + + fc_host_post_vendor_event(shost, + fc_get_event_number(), + sizeof(scsi_event), + (char *)&scsi_event, + SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_EMULEX); + if (!rdata || pnode->nlp_state != NLP_STE_MAPPED_NODE) { lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP, "0721 LUN Reset rport " @@ -1242,10 +1641,23 @@ lpfc_bus_reset_handler(struct scsi_cmnd *cmnd) struct lpfc_hba *phba = vport->phba; struct lpfc_nodelist *ndlp = NULL; int match; - int ret = SUCCESS, status, i; + int ret = SUCCESS, status = SUCCESS, i; int cnt; struct lpfc_scsi_buf * lpfc_cmd; unsigned long later; + struct lpfc_scsi_event_header scsi_event; + + scsi_event.event_type = FC_REG_SCSI_EVENT; + scsi_event.subcategory = LPFC_EVENT_BUSRESET; + scsi_event.lun = 0; + memcpy(scsi_event.wwpn, &vport->fc_portname, sizeof(struct lpfc_name)); + memcpy(scsi_event.wwnn, &vport->fc_nodename, sizeof(struct lpfc_name)); + + fc_host_post_vendor_event(shost, + fc_get_event_number(), + sizeof(scsi_event), + (char *)&scsi_event, + SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_EMULEX); lpfc_block_error_handler(cmnd); /* diff --git a/drivers/scsi/lpfc/lpfc_scsi.h b/drivers/scsi/lpfc/lpfc_scsi.h index daba9237498..437f182e232 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.h +++ b/drivers/scsi/lpfc/lpfc_scsi.h @@ -107,6 +107,10 @@ struct fcp_cmnd { }; +struct lpfc_scsicmd_bkt { + uint32_t cmd_count; +}; + struct lpfc_scsi_buf { struct list_head list; struct scsi_cmnd *pCmd; @@ -139,6 +143,7 @@ struct lpfc_scsi_buf { */ struct lpfc_iocbq cur_iocbq; wait_queue_head_t *waitq; + unsigned long start_time; }; #define LPFC_SCSI_DMA_EXT_SIZE 264 diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 50fe0764673..8ab5babdeeb 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -32,6 +32,7 @@ #include "lpfc_hw.h" #include "lpfc_sli.h" +#include "lpfc_nl.h" #include "lpfc_disc.h" #include "lpfc_scsi.h" #include "lpfc.h" @@ -66,10 +67,16 @@ typedef enum _lpfc_iocb_type { LPFC_ABORT_IOCB } lpfc_iocb_type; - /* SLI-2/SLI-3 provide different sized iocbs. Given a pointer - * to the start of the ring, and the slot number of the - * desired iocb entry, calc a pointer to that entry. - */ +/** + * lpfc_cmd_iocb: Get next command iocb entry in the ring. + * @phba: Pointer to HBA context object. + * @pring: Pointer to driver SLI ring object. + * + * This function returns pointer to next command iocb entry + * in the command ring. The caller must hold hbalock to prevent + * other threads consume the next command iocb. + * SLI-2/SLI-3 provide different sized iocbs. + **/ static inline IOCB_t * lpfc_cmd_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) { @@ -77,6 +84,16 @@ lpfc_cmd_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) pring->cmdidx * phba->iocb_cmd_size); } +/** + * lpfc_resp_iocb: Get next response iocb entry in the ring. + * @phba: Pointer to HBA context object. + * @pring: Pointer to driver SLI ring object. + * + * This function returns pointer to next response iocb entry + * in the response ring. The caller must hold hbalock to make sure + * that no other thread consume the next response iocb. + * SLI-2/SLI-3 provide different sized iocbs. + **/ static inline IOCB_t * lpfc_resp_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) { @@ -84,6 +101,15 @@ lpfc_resp_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) pring->rspidx * phba->iocb_rsp_size); } +/** + * __lpfc_sli_get_iocbq: Allocates an iocb object from iocb pool. + * @phba: Pointer to HBA context object. + * + * This function is called with hbalock held. This function + * allocates a new driver iocb object from the iocb pool. If the + * allocation is successful, it returns pointer to the newly + * allocated iocb object else it returns NULL. + **/ static struct lpfc_iocbq * __lpfc_sli_get_iocbq(struct lpfc_hba *phba) { @@ -94,6 +120,15 @@ __lpfc_sli_get_iocbq(struct lpfc_hba *phba) return iocbq; } +/** + * lpfc_sli_get_iocbq: Allocates an iocb object from iocb pool. + * @phba: Pointer to HBA context object. + * + * This function is called with no lock held. This function + * allocates a new driver iocb object from the iocb pool. If the + * allocation is successful, it returns pointer to the newly + * allocated iocb object else it returns NULL. + **/ struct lpfc_iocbq * lpfc_sli_get_iocbq(struct lpfc_hba *phba) { @@ -106,6 +141,16 @@ lpfc_sli_get_iocbq(struct lpfc_hba *phba) return iocbq; } +/** + * __lpfc_sli_release_iocbq: Release iocb to the iocb pool. + * @phba: Pointer to HBA context object. + * @iocbq: Pointer to driver iocb object. + * + * This function is called with hbalock held to release driver + * iocb object to the iocb pool. The iotag in the iocb object + * does not change for each use of the iocb object. This function + * clears all other fields of the iocb object when it is freed. + **/ static void __lpfc_sli_release_iocbq(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq) { @@ -118,6 +163,14 @@ __lpfc_sli_release_iocbq(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq) list_add_tail(&iocbq->list, &phba->lpfc_iocb_list); } +/** + * lpfc_sli_release_iocbq: Release iocb to the iocb pool. + * @phba: Pointer to HBA context object. + * @iocbq: Pointer to driver iocb object. + * + * This function is called with no lock held to release the iocb to + * iocb pool. + **/ void lpfc_sli_release_iocbq(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq) { @@ -131,10 +184,21 @@ lpfc_sli_release_iocbq(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq) spin_unlock_irqrestore(&phba->hbalock, iflags); } -/* - * Translate the iocb command to an iocb command type used to decide the final - * disposition of each completed IOCB. - */ +/** + * lpfc_sli_iocb_cmd_type: Get the iocb type. + * @iocb_cmnd : iocb command code. + * + * This function is called by ring event handler function to get the iocb type. + * This function translates the iocb command to an iocb command type used to + * decide the final disposition of each completed IOCB. + * The function returns + * LPFC_UNKNOWN_IOCB if it is an unsupported iocb + * LPFC_SOL_IOCB if it is a solicited iocb completion + * LPFC_ABORT_IOCB if it is an abort iocb + * LPFC_UNSOL_IOCB if it is an unsolicited iocb + * + * The caller is not required to hold any lock. + **/ static lpfc_iocb_type lpfc_sli_iocb_cmd_type(uint8_t iocb_cmnd) { @@ -230,6 +294,17 @@ lpfc_sli_iocb_cmd_type(uint8_t iocb_cmnd) return type; } +/** + * lpfc_sli_ring_map: Issue config_ring mbox for all rings. + * @phba: Pointer to HBA context object. + * + * This function is called from SLI initialization code + * to configure every ring of the HBA's SLI interface. The + * caller is not required to hold any lock. This function issues + * a config_ring mailbox command for each ring. + * This function returns zero if successful else returns a negative + * error code. + **/ static int lpfc_sli_ring_map(struct lpfc_hba *phba) { @@ -262,6 +337,18 @@ lpfc_sli_ring_map(struct lpfc_hba *phba) return ret; } +/** + * lpfc_sli_ringtxcmpl_put: Adds new iocb to the txcmplq. + * @phba: Pointer to HBA context object. + * @pring: Pointer to driver SLI ring object. + * @piocb: Pointer to the driver iocb object. + * + * This function is called with hbalock held. The function adds the + * new iocb to txcmplq of the given ring. This function always returns + * 0. If this function is called for ELS ring, this function checks if + * there is a vport associated with the ELS command. This function also + * starts els_tmofunc timer if this is an ELS command. + **/ static int lpfc_sli_ringtxcmpl_put(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, struct lpfc_iocbq *piocb) @@ -282,6 +369,16 @@ lpfc_sli_ringtxcmpl_put(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, return 0; } +/** + * lpfc_sli_ringtx_get: Get first element of the txq. + * @phba: Pointer to HBA context object. + * @pring: Pointer to driver SLI ring object. + * + * This function is called with hbalock held to get next + * iocb in txq of the given ring. If there is any iocb in + * the txq, the function returns first iocb in the list after + * removing the iocb from the list, else it returns NULL. + **/ static struct lpfc_iocbq * lpfc_sli_ringtx_get(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) { @@ -293,14 +390,25 @@ lpfc_sli_ringtx_get(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) return cmd_iocb; } +/** + * lpfc_sli_next_iocb_slot: Get next iocb slot in the ring. + * @phba: Pointer to HBA context object. + * @pring: Pointer to driver SLI ring object. + * + * This function is called with hbalock held and the caller must post the + * iocb without releasing the lock. If the caller releases the lock, + * iocb slot returned by the function is not guaranteed to be available. + * The function returns pointer to the next available iocb slot if there + * is available slot in the ring, else it returns NULL. + * If the get index of the ring is ahead of the put index, the function + * will post an error attention event to the worker thread to take the + * HBA to offline state. + **/ static IOCB_t * lpfc_sli_next_iocb_slot (struct lpfc_hba *phba, struct lpfc_sli_ring *pring) { - struct lpfc_pgp *pgp = (phba->sli_rev == 3) ? - &phba->slim2p->mbx.us.s3_pgp.port[pring->ringno] : - &phba->slim2p->mbx.us.s2.port[pring->ringno]; + struct lpfc_pgp *pgp = &phba->port_gp[pring->ringno]; uint32_t max_cmd_idx = pring->numCiocb; - if ((pring->next_cmdidx == pring->cmdidx) && (++pring->next_cmdidx >= max_cmd_idx)) pring->next_cmdidx = 0; @@ -336,6 +444,18 @@ lpfc_sli_next_iocb_slot (struct lpfc_hba *phba, struct lpfc_sli_ring *pring) return lpfc_cmd_iocb(phba, pring); } +/** + * lpfc_sli_next_iotag: Get an iotag for the iocb. + * @phba: Pointer to HBA context object. + * @iocbq: Pointer to driver iocb object. + * + * This function gets an iotag for the iocb. If there is no unused iotag and + * the iocbq_lookup_len < 0xffff, this function allocates a bigger iotag_lookup + * array and assigns a new iotag. + * The function returns the allocated iotag if successful, else returns zero. + * Zero is not a valid iotag. + * The caller is not required to hold any lock. + **/ uint16_t lpfc_sli_next_iotag(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq) { @@ -399,6 +519,20 @@ lpfc_sli_next_iotag(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq) return 0; } +/** + * lpfc_sli_submit_iocb: Submit an iocb to the firmware. + * @phba: Pointer to HBA context object. + * @pring: Pointer to driver SLI ring object. + * @iocb: Pointer to iocb slot in the ring. + * @nextiocb: Pointer to driver iocb object which need to be + * posted to firmware. + * + * This function is called with hbalock held to post a new iocb to + * the firmware. This function copies the new iocb to ring iocb slot and + * updates the ring pointers. It adds the new iocb to txcmplq if there is + * a completion call back for this iocb else the function will free the + * iocb object. + **/ static void lpfc_sli_submit_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, IOCB_t *iocb, struct lpfc_iocbq *nextiocb) @@ -441,6 +575,18 @@ lpfc_sli_submit_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, writel(pring->cmdidx, &phba->host_gp[pring->ringno].cmdPutInx); } +/** + * lpfc_sli_update_full_ring: Update the chip attention register. + * @phba: Pointer to HBA context object. + * @pring: Pointer to driver SLI ring object. + * + * The caller is not required to hold any lock for calling this function. + * This function updates the chip attention bits for the ring to inform firmware + * that there are pending work to be done for this ring and requests an + * interrupt when there is space available in the ring. This function is + * called when the driver is unable to post more iocbs to the ring due + * to unavailability of space in the ring. + **/ static void lpfc_sli_update_full_ring(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) { @@ -460,6 +606,15 @@ lpfc_sli_update_full_ring(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) pring->stats.iocb_cmd_full++; } +/** + * lpfc_sli_update_ring: Update chip attention register. + * @phba: Pointer to HBA context object. + * @pring: Pointer to driver SLI ring object. + * + * This function updates the chip attention register bit for the + * given ring to inform HBA that there is more work to be done + * in this ring. The caller is not required to hold any lock. + **/ static void lpfc_sli_update_ring(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) { @@ -468,11 +623,22 @@ lpfc_sli_update_ring(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) /* * Tell the HBA that there is work to do in this ring. */ - wmb(); - writel(CA_R0ATT << (ringno * 4), phba->CAregaddr); - readl(phba->CAregaddr); /* flush */ + if (!(phba->sli3_options & LPFC_SLI3_CRP_ENABLED)) { + wmb(); + writel(CA_R0ATT << (ringno * 4), phba->CAregaddr); + readl(phba->CAregaddr); /* flush */ + } } +/** + * lpfc_sli_resume_iocb: Process iocbs in the txq. + * @phba: Pointer to HBA context object. + * @pring: Pointer to driver SLI ring object. + * + * This function is called with hbalock held to post pending iocbs + * in the txq to the firmware. This function is called when driver + * detects space available in the ring. + **/ static void lpfc_sli_resume_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) { @@ -504,6 +670,16 @@ lpfc_sli_resume_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) return; } +/** + * lpfc_sli_next_hbq_slot: Get next hbq entry for the HBQ. + * @phba: Pointer to HBA context object. + * @hbqno: HBQ number. + * + * This function is called with hbalock held to get the next + * available slot for the given HBQ. If there is free slot + * available for the HBQ it will return pointer to the next available + * HBQ entry else it will return NULL. + **/ static struct lpfc_hbq_entry * lpfc_sli_next_hbq_slot(struct lpfc_hba *phba, uint32_t hbqno) { @@ -539,6 +715,15 @@ lpfc_sli_next_hbq_slot(struct lpfc_hba *phba, uint32_t hbqno) hbqp->hbqPutIdx; } +/** + * lpfc_sli_hbqbuf_free_all: Free all the hbq buffers. + * @phba: Pointer to HBA context object. + * + * This function is called with no lock held to free all the + * hbq buffers while uninitializing the SLI interface. It also + * frees the HBQ buffers returned by the firmware but not yet + * processed by the upper layers. + **/ void lpfc_sli_hbqbuf_free_all(struct lpfc_hba *phba) { @@ -584,6 +769,18 @@ lpfc_sli_hbqbuf_free_all(struct lpfc_hba *phba) spin_unlock_irqrestore(&phba->hbalock, flags); } +/** + * lpfc_sli_hbq_to_firmware: Post the hbq buffer to firmware. + * @phba: Pointer to HBA context object. + * @hbqno: HBQ number. + * @hbq_buf: Pointer to HBQ buffer. + * + * This function is called with the hbalock held to post a + * hbq buffer to the firmware. If the function finds an empty + * slot in the HBQ, it will post the buffer. The function will return + * pointer to the hbq entry if it successfully post the buffer + * else it will return NULL. + **/ static struct lpfc_hbq_entry * lpfc_sli_hbq_to_firmware(struct lpfc_hba *phba, uint32_t hbqno, struct hbq_dmabuf *hbq_buf) @@ -612,6 +809,7 @@ lpfc_sli_hbq_to_firmware(struct lpfc_hba *phba, uint32_t hbqno, return hbqe; } +/* HBQ for ELS and CT traffic. */ static struct lpfc_hbq_init lpfc_els_hbq = { .rn = 1, .entry_count = 200, @@ -623,6 +821,7 @@ static struct lpfc_hbq_init lpfc_els_hbq = { .add_count = 5, }; +/* HBQ for the extra ring if needed */ static struct lpfc_hbq_init lpfc_extra_hbq = { .rn = 1, .entry_count = 200, @@ -634,51 +833,81 @@ static struct lpfc_hbq_init lpfc_extra_hbq = { .add_count = 5, }; +/* Array of HBQs */ struct lpfc_hbq_init *lpfc_hbq_defs[] = { &lpfc_els_hbq, &lpfc_extra_hbq, }; +/** + * lpfc_sli_hbqbuf_fill_hbqs: Post more hbq buffers to HBQ. + * @phba: Pointer to HBA context object. + * @hbqno: HBQ number. + * @count: Number of HBQ buffers to be posted. + * + * This function is called with no lock held to post more hbq buffers to the + * given HBQ. The function returns the number of HBQ buffers successfully + * posted. + **/ static int lpfc_sli_hbqbuf_fill_hbqs(struct lpfc_hba *phba, uint32_t hbqno, uint32_t count) { - uint32_t i, start, end; + uint32_t i, posted = 0; unsigned long flags; struct hbq_dmabuf *hbq_buffer; - + LIST_HEAD(hbq_buf_list); if (!phba->hbqs[hbqno].hbq_alloc_buffer) return 0; - start = phba->hbqs[hbqno].buffer_count; - end = count + start; - if (end > lpfc_hbq_defs[hbqno]->entry_count) - end = lpfc_hbq_defs[hbqno]->entry_count; - + if ((phba->hbqs[hbqno].buffer_count + count) > + lpfc_hbq_defs[hbqno]->entry_count) + count = lpfc_hbq_defs[hbqno]->entry_count - + phba->hbqs[hbqno].buffer_count; + if (!count) + return 0; + /* Allocate HBQ entries */ + for (i = 0; i < count; i++) { + hbq_buffer = (phba->hbqs[hbqno].hbq_alloc_buffer)(phba); + if (!hbq_buffer) + break; + list_add_tail(&hbq_buffer->dbuf.list, &hbq_buf_list); + } /* Check whether HBQ is still in use */ spin_lock_irqsave(&phba->hbalock, flags); if (!phba->hbq_in_use) - goto out; - - /* Populate HBQ entries */ - for (i = start; i < end; i++) { - hbq_buffer = (phba->hbqs[hbqno].hbq_alloc_buffer)(phba); - if (!hbq_buffer) - goto err; - hbq_buffer->tag = (i | (hbqno << 16)); - if (lpfc_sli_hbq_to_firmware(phba, hbqno, hbq_buffer)) + goto err; + while (!list_empty(&hbq_buf_list)) { + list_remove_head(&hbq_buf_list, hbq_buffer, struct hbq_dmabuf, + dbuf.list); + hbq_buffer->tag = (phba->hbqs[hbqno].buffer_count | + (hbqno << 16)); + if (lpfc_sli_hbq_to_firmware(phba, hbqno, hbq_buffer)) { phba->hbqs[hbqno].buffer_count++; - else + posted++; + } else (phba->hbqs[hbqno].hbq_free_buffer)(phba, hbq_buffer); } - - out: spin_unlock_irqrestore(&phba->hbalock, flags); - return 0; - err: + return posted; +err: spin_unlock_irqrestore(&phba->hbalock, flags); - return 1; + while (!list_empty(&hbq_buf_list)) { + list_remove_head(&hbq_buf_list, hbq_buffer, struct hbq_dmabuf, + dbuf.list); + (phba->hbqs[hbqno].hbq_free_buffer)(phba, hbq_buffer); + } + return 0; } +/** + * lpfc_sli_hbqbuf_add_hbqs: Post more HBQ buffers to firmware. + * @phba: Pointer to HBA context object. + * @qno: HBQ number. + * + * This function posts more buffers to the HBQ. This function + * is called with no lock held. The function returns the number of HBQ entries + * successfully allocated. + **/ int lpfc_sli_hbqbuf_add_hbqs(struct lpfc_hba *phba, uint32_t qno) { @@ -686,6 +915,15 @@ lpfc_sli_hbqbuf_add_hbqs(struct lpfc_hba *phba, uint32_t qno) lpfc_hbq_defs[qno]->add_count)); } +/** + * lpfc_sli_hbqbuf_init_hbqs: Post initial buffers to the HBQ. + * @phba: Pointer to HBA context object. + * @qno: HBQ queue number. + * + * This function is called from SLI initialization code path with + * no lock held to post initial HBQ buffers to firmware. The + * function returns the number of HBQ entries successfully allocated. + **/ static int lpfc_sli_hbqbuf_init_hbqs(struct lpfc_hba *phba, uint32_t qno) { @@ -693,6 +931,16 @@ lpfc_sli_hbqbuf_init_hbqs(struct lpfc_hba *phba, uint32_t qno) lpfc_hbq_defs[qno]->init_count)); } +/** + * lpfc_sli_hbqbuf_find: Find the hbq buffer associated with a tag. + * @phba: Pointer to HBA context object. + * @tag: Tag of the hbq buffer. + * + * This function is called with hbalock held. This function searches + * for the hbq buffer associated with the given tag in the hbq buffer + * list. If it finds the hbq buffer, it returns the hbq_buffer other wise + * it returns NULL. + **/ static struct hbq_dmabuf * lpfc_sli_hbqbuf_find(struct lpfc_hba *phba, uint32_t tag) { @@ -716,6 +964,15 @@ lpfc_sli_hbqbuf_find(struct lpfc_hba *phba, uint32_t tag) return NULL; } +/** + * lpfc_sli_free_hbq: Give back the hbq buffer to firmware. + * @phba: Pointer to HBA context object. + * @hbq_buffer: Pointer to HBQ buffer. + * + * This function is called with hbalock. This function gives back + * the hbq buffer to firmware. If the HBQ does not have space to + * post the buffer, it will free the buffer. + **/ void lpfc_sli_free_hbq(struct lpfc_hba *phba, struct hbq_dmabuf *hbq_buffer) { @@ -729,6 +986,15 @@ lpfc_sli_free_hbq(struct lpfc_hba *phba, struct hbq_dmabuf *hbq_buffer) } } +/** + * lpfc_sli_chk_mbx_command: Check if the mailbox is a legitimate mailbox. + * @mbxCommand: mailbox command code. + * + * This function is called by the mailbox event handler function to verify + * that the completed mailbox command is a legitimate mailbox command. If the + * completed mailbox is not known to the function, it will return MBX_SHUTDOWN + * and the mailbox event handler will take the HBA offline. + **/ static int lpfc_sli_chk_mbx_command(uint8_t mbxCommand) { @@ -785,6 +1051,8 @@ lpfc_sli_chk_mbx_command(uint8_t mbxCommand) case MBX_REG_VPI: case MBX_UNREG_VPI: case MBX_HEARTBEAT: + case MBX_PORT_CAPABILITIES: + case MBX_PORT_IOV_CONTROL: ret = mbxCommand; break; default: @@ -793,6 +1061,19 @@ lpfc_sli_chk_mbx_command(uint8_t mbxCommand) } return ret; } + +/** + * lpfc_sli_wake_mbox_wait: Completion handler for mbox issued from + * lpfc_sli_issue_mbox_wait. + * @phba: Pointer to HBA context object. + * @pmboxq: Pointer to mailbox command. + * + * This is completion handler function for mailbox commands issued from + * lpfc_sli_issue_mbox_wait function. This function is called by the + * mailbox event handler function with no lock held. This function + * will wake up thread waiting on the wait queue pointed by context1 + * of the mailbox. + **/ static void lpfc_sli_wake_mbox_wait(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq) { @@ -812,6 +1093,17 @@ lpfc_sli_wake_mbox_wait(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq) return; } + +/** + * lpfc_sli_def_mbox_cmpl: Default mailbox completion handler. + * @phba: Pointer to HBA context object. + * @pmb: Pointer to mailbox object. + * + * This function is the default mailbox completion handler. It + * frees the memory resources associated with the completed mailbox + * command. If the completed command is a REG_LOGIN mailbox command, + * this function will issue a UREG_LOGIN to re-claim the RPI. + **/ void lpfc_sli_def_mbox_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) { @@ -846,6 +1138,19 @@ lpfc_sli_def_mbox_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) return; } +/** + * lpfc_sli_handle_mb_event: Handle mailbox completions from firmware. + * @phba: Pointer to HBA context object. + * + * This function is called with no lock held. This function processes all + * the completed mailbox commands and gives it to upper layers. The interrupt + * service routine processes mailbox completion interrupt and adds completed + * mailbox commands to the mboxq_cmpl queue and signals the worker thread. + * Worker thread call lpfc_sli_handle_mb_event, which will return the + * completed mailbox commands in mboxq_cmpl queue to the upper layers. This + * function returns the mailbox commands to the upper layer by calling the + * completion handler function of each mailbox. + **/ int lpfc_sli_handle_mb_event(struct lpfc_hba *phba) { @@ -953,6 +1258,18 @@ lpfc_sli_handle_mb_event(struct lpfc_hba *phba) return 0; } +/** + * lpfc_sli_replace_hbqbuff: Replace the HBQ buffer with a new buffer. + * @phba: Pointer to HBA context object. + * @tag: Tag for the HBQ buffer. + * + * This function is called from unsolicited event handler code path to get the + * HBQ buffer associated with an unsolicited iocb. This function is called with + * no lock held. It returns the buffer associated with the given tag and posts + * another buffer to the firmware. Note that the new buffer must be allocated + * before taking the hbalock and that the hba lock must be held until it is + * finished with the hbq entry swap. + **/ static struct lpfc_dmabuf * lpfc_sli_replace_hbqbuff(struct lpfc_hba *phba, uint32_t tag) { @@ -962,22 +1279,28 @@ lpfc_sli_replace_hbqbuff(struct lpfc_hba *phba, uint32_t tag) dma_addr_t phys; /* mapped address */ unsigned long flags; + hbqno = tag >> 16; + new_hbq_entry = (phba->hbqs[hbqno].hbq_alloc_buffer)(phba); /* Check whether HBQ is still in use */ spin_lock_irqsave(&phba->hbalock, flags); if (!phba->hbq_in_use) { + if (new_hbq_entry) + (phba->hbqs[hbqno].hbq_free_buffer)(phba, + new_hbq_entry); spin_unlock_irqrestore(&phba->hbalock, flags); return NULL; } hbq_entry = lpfc_sli_hbqbuf_find(phba, tag); if (hbq_entry == NULL) { + if (new_hbq_entry) + (phba->hbqs[hbqno].hbq_free_buffer)(phba, + new_hbq_entry); spin_unlock_irqrestore(&phba->hbalock, flags); return NULL; } list_del(&hbq_entry->dbuf.list); - hbqno = tag >> 16; - new_hbq_entry = (phba->hbqs[hbqno].hbq_alloc_buffer)(phba); if (new_hbq_entry == NULL) { list_add_tail(&hbq_entry->dbuf.list, &phba->hbqbuf_in_list); spin_unlock_irqrestore(&phba->hbalock, flags); @@ -997,6 +1320,18 @@ lpfc_sli_replace_hbqbuff(struct lpfc_hba *phba, uint32_t tag) return &new_hbq_entry->dbuf; } +/** + * lpfc_sli_get_buff: Get the buffer associated with the buffer tag. + * @phba: Pointer to HBA context object. + * @pring: Pointer to driver SLI ring object. + * @tag: buffer tag. + * + * This function is called with no lock held. When QUE_BUFTAG_BIT bit + * is set in the tag the buffer is posted for a particular exchange, + * the function will return the buffer without replacing the buffer. + * If the buffer is for unsolicited ELS or CT traffic, this function + * returns the buffer and also posts another buffer to the firmware. + **/ static struct lpfc_dmabuf * lpfc_sli_get_buff(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, @@ -1008,6 +1343,21 @@ lpfc_sli_get_buff(struct lpfc_hba *phba, return lpfc_sli_replace_hbqbuff(phba, tag); } + +/** + * lpfc_sli_process_unsol_iocb: Unsolicited iocb handler. + * @phba: Pointer to HBA context object. + * @pring: Pointer to driver SLI ring object. + * @saveq: Pointer to the unsolicited iocb. + * + * This function is called with no lock held by the ring event handler + * when there is an unsolicited iocb posted to the response ring by the + * firmware. This function gets the buffer associated with the iocbs + * and calls the event handler for the ring. This function handles both + * qring buffers and hbq buffers. + * When the function returns 1 the caller can free the iocb object otherwise + * upper layer functions will free the iocb objects. + **/ static int lpfc_sli_process_unsol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, struct lpfc_iocbq *saveq) @@ -1192,6 +1542,18 @@ lpfc_sli_process_unsol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, return 1; } +/** + * lpfc_sli_iocbq_lookup: Find command iocb for the given response iocb. + * @phba: Pointer to HBA context object. + * @pring: Pointer to driver SLI ring object. + * @prspiocb: Pointer to response iocb object. + * + * This function looks up the iocb_lookup table to get the command iocb + * corresponding to the given response iocb using the iotag of the + * response iocb. This function is called with the hbalock held. + * This function returns the command iocb object if it finds the command + * iocb else returns NULL. + **/ static struct lpfc_iocbq * lpfc_sli_iocbq_lookup(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, @@ -1217,6 +1579,23 @@ lpfc_sli_iocbq_lookup(struct lpfc_hba *phba, return NULL; } +/** + * lpfc_sli_process_sol_iocb: process solicited iocb completion. + * @phba: Pointer to HBA context object. + * @pring: Pointer to driver SLI ring object. + * @saveq: Pointer to the response iocb to be processed. + * + * This function is called by the ring event handler for non-fcp + * rings when there is a new response iocb in the response ring. + * The caller is not required to hold any locks. This function + * gets the command iocb associated with the response iocb and + * calls the completion handler for the command iocb. If there + * is no completion handler, the function will free the resources + * associated with command iocb. If the response iocb is for + * an already aborted command iocb, the status of the completion + * is changed to IOSTAT_LOCAL_REJECT/IOERR_SLI_ABORTED. + * This function always returns 1. + **/ static int lpfc_sli_process_sol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, struct lpfc_iocbq *saveq) @@ -1233,6 +1612,17 @@ lpfc_sli_process_sol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, if (cmdiocbp) { if (cmdiocbp->iocb_cmpl) { /* + * If an ELS command failed send an event to mgmt + * application. + */ + if (saveq->iocb.ulpStatus && + (pring->ringno == LPFC_ELS_RING) && + (cmdiocbp->iocb.ulpCommand == + CMD_ELS_REQUEST64_CR)) + lpfc_send_els_failure_event(phba, + cmdiocbp, saveq); + + /* * Post all ELS completions to the worker thread. * All other are passed to the completion callback. */ @@ -1282,12 +1672,20 @@ lpfc_sli_process_sol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, return rc; } +/** + * lpfc_sli_rsp_pointers_error: Response ring pointer error handler. + * @phba: Pointer to HBA context object. + * @pring: Pointer to driver SLI ring object. + * + * This function is called from the iocb ring event handlers when + * put pointer is ahead of the get pointer for a ring. This function signal + * an error attention condition to the worker thread and the worker + * thread will transition the HBA to offline state. + **/ static void lpfc_sli_rsp_pointers_error(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) { - struct lpfc_pgp *pgp = (phba->sli_rev == 3) ? - &phba->slim2p->mbx.us.s3_pgp.port[pring->ringno] : - &phba->slim2p->mbx.us.s2.port[pring->ringno]; + struct lpfc_pgp *pgp = &phba->port_gp[pring->ringno]; /* * Ring <ringno> handler: portRspPut <portRspPut> is bigger then * rsp ring <portRspMax> @@ -1312,6 +1710,51 @@ lpfc_sli_rsp_pointers_error(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) return; } +/** + * lpfc_poll_eratt: Error attention polling timer timeout handler. + * @ptr: Pointer to address of HBA context object. + * + * This function is invoked by the Error Attention polling timer when the + * timer times out. It will check the SLI Error Attention register for + * possible attention events. If so, it will post an Error Attention event + * and wake up worker thread to process it. Otherwise, it will set up the + * Error Attention polling timer for the next poll. + **/ +void lpfc_poll_eratt(unsigned long ptr) +{ + struct lpfc_hba *phba; + uint32_t eratt = 0; + + phba = (struct lpfc_hba *)ptr; + + /* Check chip HA register for error event */ + eratt = lpfc_sli_check_eratt(phba); + + if (eratt) + /* Tell the worker thread there is work to do */ + lpfc_worker_wake_up(phba); + else + /* Restart the timer for next eratt poll */ + mod_timer(&phba->eratt_poll, jiffies + + HZ * LPFC_ERATT_POLL_INTERVAL); + return; +} + +/** + * lpfc_sli_poll_fcp_ring: Handle FCP ring completion in polling mode. + * @phba: Pointer to HBA context object. + * + * This function is called from lpfc_queuecommand, lpfc_poll_timeout, + * lpfc_abort_handler and lpfc_slave_configure when FCP_RING_POLLING + * is enabled. + * + * The caller does not hold any lock. + * The function processes each response iocb in the response ring until it + * finds an iocb with LE bit set and chains all the iocbs upto the iocb with + * LE bit set. The function will call the completion handler of the command iocb + * if the response iocb indicates a completion for a command iocb or it is + * an abort completion. + **/ void lpfc_sli_poll_fcp_ring(struct lpfc_hba *phba) { struct lpfc_sli *psli = &phba->sli; @@ -1320,7 +1763,7 @@ void lpfc_sli_poll_fcp_ring(struct lpfc_hba *phba) IOCB_t *entry = NULL; struct lpfc_iocbq *cmdiocbq = NULL; struct lpfc_iocbq rspiocbq; - struct lpfc_pgp *pgp; + struct lpfc_pgp *pgp = &phba->port_gp[pring->ringno]; uint32_t status; uint32_t portRspPut, portRspMax; int type; @@ -1330,11 +1773,6 @@ void lpfc_sli_poll_fcp_ring(struct lpfc_hba *phba) pring->stats.iocb_event++; - pgp = (phba->sli_rev == 3) ? - &phba->slim2p->mbx.us.s3_pgp.port[pring->ringno] : - &phba->slim2p->mbx.us.s2.port[pring->ringno]; - - /* * The next available response entry should never exceed the maximum * entries. If it does, treat it as an adapter hardware error. @@ -1372,8 +1810,8 @@ void lpfc_sli_poll_fcp_ring(struct lpfc_hba *phba) irsp->un.ulpWord[3], irsp->un.ulpWord[4], irsp->un.ulpWord[5], - *(((uint32_t *) irsp) + 6), - *(((uint32_t *) irsp) + 7)); + *(uint32_t *)&irsp->un1, + *((uint32_t *)&irsp->un1 + 1)); } switch (type) { @@ -1465,17 +1903,28 @@ void lpfc_sli_poll_fcp_ring(struct lpfc_hba *phba) return; } -/* +/** + * lpfc_sli_handle_fast_ring_event: Handle ring events on FCP ring. + * @phba: Pointer to HBA context object. + * @pring: Pointer to driver SLI ring object. + * @mask: Host attention register mask for this ring. + * + * This function is called from the interrupt context when there is a ring + * event for the fcp ring. The caller does not hold any lock. + * The function processes each response iocb in the response ring until it + * finds an iocb with LE bit set and chains all the iocbs upto the iocb with + * LE bit set. The function will call the completion handler of the command iocb + * if the response iocb indicates a completion for a command iocb or it is + * an abort completion. The function will call lpfc_sli_process_unsol_iocb + * function if this is an unsolicited iocb. * This routine presumes LPFC_FCP_RING handling and doesn't bother - * to check it explicitly. - */ + * to check it explicitly. This function always returns 1. + **/ static int lpfc_sli_handle_fast_ring_event(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, uint32_t mask) { - struct lpfc_pgp *pgp = (phba->sli_rev == 3) ? - &phba->slim2p->mbx.us.s3_pgp.port[pring->ringno] : - &phba->slim2p->mbx.us.s2.port[pring->ringno]; + struct lpfc_pgp *pgp = &phba->port_gp[pring->ringno]; IOCB_t *irsp = NULL; IOCB_t *entry = NULL; struct lpfc_iocbq *cmdiocbq = NULL; @@ -1548,8 +1997,8 @@ lpfc_sli_handle_fast_ring_event(struct lpfc_hba *phba, irsp->un.ulpWord[3], irsp->un.ulpWord[4], irsp->un.ulpWord[5], - *(((uint32_t *) irsp) + 6), - *(((uint32_t *) irsp) + 7)); + *(uint32_t *)&irsp->un1, + *((uint32_t *)&irsp->un1 + 1)); } switch (type) { @@ -1646,13 +2095,28 @@ lpfc_sli_handle_fast_ring_event(struct lpfc_hba *phba, return rc; } +/** + * lpfc_sli_handle_slow_ring_event: Handle ring events for non-FCP rings. + * @phba: Pointer to HBA context object. + * @pring: Pointer to driver SLI ring object. + * @mask: Host attention register mask for this ring. + * + * This function is called from the worker thread when there is a ring + * event for non-fcp rings. The caller does not hold any lock . + * The function processes each response iocb in the response ring until it + * finds an iocb with LE bit set and chains all the iocbs upto the iocb with + * LE bit set. The function will call lpfc_sli_process_sol_iocb function if the + * response iocb indicates a completion of a command iocb. The function + * will call lpfc_sli_process_unsol_iocb function if this is an unsolicited + * iocb. The function frees the resources or calls the completion handler if + * this iocb is an abort completion. The function returns 0 when the allocated + * iocbs are not freed, otherwise returns 1. + **/ int lpfc_sli_handle_slow_ring_event(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, uint32_t mask) { - struct lpfc_pgp *pgp = (phba->sli_rev == 3) ? - &phba->slim2p->mbx.us.s3_pgp.port[pring->ringno] : - &phba->slim2p->mbx.us.s2.port[pring->ringno]; + struct lpfc_pgp *pgp; IOCB_t *entry; IOCB_t *irsp = NULL; struct lpfc_iocbq *rspiocbp = NULL; @@ -1666,6 +2130,7 @@ lpfc_sli_handle_slow_ring_event(struct lpfc_hba *phba, int rc = 1; unsigned long iflag; + pgp = &phba->port_gp[pring->ringno]; spin_lock_irqsave(&phba->hbalock, iflag); pring->stats.iocb_event++; @@ -1904,6 +2369,16 @@ lpfc_sli_handle_slow_ring_event(struct lpfc_hba *phba, return rc; } +/** + * lpfc_sli_abort_iocb_ring: Abort all iocbs in the ring. + * @phba: Pointer to HBA context object. + * @pring: Pointer to driver SLI ring object. + * + * This function aborts all iocbs in the given ring and frees all the iocb + * objects in txq. This function issues an abort iocb for all the iocb commands + * in txcmplq. The iocbs in the txcmplq is not guaranteed to complete before + * the return of this function. The caller is not required to hold any locks. + **/ void lpfc_sli_abort_iocb_ring(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) { @@ -1943,6 +2418,83 @@ lpfc_sli_abort_iocb_ring(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) } } +/** + * lpfc_sli_flush_fcp_rings: flush all iocbs in the fcp ring. + * @phba: Pointer to HBA context object. + * + * This function flushes all iocbs in the fcp ring and frees all the iocb + * objects in txq and txcmplq. This function will not issue abort iocbs + * for all the iocb commands in txcmplq, they will just be returned with + * IOERR_SLI_DOWN. This function is invoked with EEH when device's PCI + * slot has been permanently disabled. + **/ +void +lpfc_sli_flush_fcp_rings(struct lpfc_hba *phba) +{ + LIST_HEAD(txq); + LIST_HEAD(txcmplq); + struct lpfc_iocbq *iocb; + IOCB_t *cmd = NULL; + struct lpfc_sli *psli = &phba->sli; + struct lpfc_sli_ring *pring; + + /* Currently, only one fcp ring */ + pring = &psli->ring[psli->fcp_ring]; + + spin_lock_irq(&phba->hbalock); + /* Retrieve everything on txq */ + list_splice_init(&pring->txq, &txq); + pring->txq_cnt = 0; + + /* Retrieve everything on the txcmplq */ + list_splice_init(&pring->txcmplq, &txcmplq); + pring->txcmplq_cnt = 0; + spin_unlock_irq(&phba->hbalock); + + /* Flush the txq */ + while (!list_empty(&txq)) { + iocb = list_get_first(&txq, struct lpfc_iocbq, list); + cmd = &iocb->iocb; + list_del_init(&iocb->list); + + if (!iocb->iocb_cmpl) + lpfc_sli_release_iocbq(phba, iocb); + else { + cmd->ulpStatus = IOSTAT_LOCAL_REJECT; + cmd->un.ulpWord[4] = IOERR_SLI_DOWN; + (iocb->iocb_cmpl) (phba, iocb, iocb); + } + } + + /* Flush the txcmpq */ + while (!list_empty(&txcmplq)) { + iocb = list_get_first(&txcmplq, struct lpfc_iocbq, list); + cmd = &iocb->iocb; + list_del_init(&iocb->list); + + if (!iocb->iocb_cmpl) + lpfc_sli_release_iocbq(phba, iocb); + else { + cmd->ulpStatus = IOSTAT_LOCAL_REJECT; + cmd->un.ulpWord[4] = IOERR_SLI_DOWN; + (iocb->iocb_cmpl) (phba, iocb, iocb); + } + } +} + +/** + * lpfc_sli_brdready: Check for host status bits. + * @phba: Pointer to HBA context object. + * @mask: Bit mask to be checked. + * + * This function reads the host status register and compares + * with the provided bit mask to check if HBA completed + * the restart. This function will wait in a loop for the + * HBA to complete restart. If the HBA does not restart within + * 15 iterations, the function will reset the HBA again. The + * function returns 1 when HBA fail to restart otherwise returns + * zero. + **/ int lpfc_sli_brdready(struct lpfc_hba *phba, uint32_t mask) { @@ -1990,6 +2542,13 @@ lpfc_sli_brdready(struct lpfc_hba *phba, uint32_t mask) #define BARRIER_TEST_PATTERN (0xdeadbeef) +/** + * lpfc_reset_barrier: Make HBA ready for HBA reset. + * @phba: Pointer to HBA context object. + * + * This function is called before resetting an HBA. This + * function requests HBA to quiesce DMAs before a reset. + **/ void lpfc_reset_barrier(struct lpfc_hba *phba) { uint32_t __iomem *resp_buf; @@ -2063,6 +2622,17 @@ restore_hc: readl(phba->HCregaddr); /* flush */ } +/** + * lpfc_sli_brdkill: Issue a kill_board mailbox command. + * @phba: Pointer to HBA context object. + * + * This function issues a kill_board mailbox command and waits for + * the error attention interrupt. This function is called for stopping + * the firmware processing. The caller is not required to hold any + * locks. This function calls lpfc_hba_down_post function to free + * any pending commands after the kill. The function will return 1 when it + * fails to kill the board else will return 0. + **/ int lpfc_sli_brdkill(struct lpfc_hba *phba) { @@ -2139,6 +2709,17 @@ lpfc_sli_brdkill(struct lpfc_hba *phba) return ha_copy & HA_ERATT ? 0 : 1; } +/** + * lpfc_sli_brdreset: Reset the HBA. + * @phba: Pointer to HBA context object. + * + * This function resets the HBA by writing HC_INITFF to the control + * register. After the HBA resets, this function resets all the iocb ring + * indices. This function disables PCI layer parity checking during + * the reset. + * This function returns 0 always. + * The caller is not required to hold any locks. + **/ int lpfc_sli_brdreset(struct lpfc_hba *phba) { @@ -2191,6 +2772,19 @@ lpfc_sli_brdreset(struct lpfc_hba *phba) return 0; } +/** + * lpfc_sli_brdrestart: Restart the HBA. + * @phba: Pointer to HBA context object. + * + * This function is called in the SLI initialization code path to + * restart the HBA. The caller is not required to hold any lock. + * This function writes MBX_RESTART mailbox command to the SLIM and + * resets the HBA. At the end of the function, it calls lpfc_hba_down_post + * function to free any pending commands. The function enables + * POST only during the first initialization. The function returns zero. + * The function does not guarantee completion of MBX_RESTART mailbox + * command before the return of this function. + **/ int lpfc_sli_brdrestart(struct lpfc_hba *phba) { @@ -2251,6 +2845,16 @@ lpfc_sli_brdrestart(struct lpfc_hba *phba) return 0; } +/** + * lpfc_sli_chipset_init: Wait for the restart of the HBA after a restart. + * @phba: Pointer to HBA context object. + * + * This function is called after a HBA restart to wait for successful + * restart of the HBA. Successful restart of the HBA is indicated by + * HS_FFRDY and HS_MBRDY bits. If the HBA fails to restart even after 15 + * iteration, the function will restart the HBA again. The function returns + * zero if HBA successfully restarted else returns negative error code. + **/ static int lpfc_sli_chipset_init(struct lpfc_hba *phba) { @@ -2336,12 +2940,25 @@ lpfc_sli_chipset_init(struct lpfc_hba *phba) return 0; } +/** + * lpfc_sli_hbq_count: Get the number of HBQs to be configured. + * + * This function calculates and returns the number of HBQs required to be + * configured. + **/ int lpfc_sli_hbq_count(void) { return ARRAY_SIZE(lpfc_hbq_defs); } +/** + * lpfc_sli_hbq_entry_count: Calculate total number of hbq entries. + * + * This function adds the number of hbq entries in every HBQ to get + * the total number of hbq entries required for the HBA and returns + * the total count. + **/ static int lpfc_sli_hbq_entry_count(void) { @@ -2354,12 +2971,27 @@ lpfc_sli_hbq_entry_count(void) return count; } +/** + * lpfc_sli_hbq_size: Calculate memory required for all hbq entries. + * + * This function calculates amount of memory required for all hbq entries + * to be configured and returns the total memory required. + **/ int lpfc_sli_hbq_size(void) { return lpfc_sli_hbq_entry_count() * sizeof(struct lpfc_hbq_entry); } +/** + * lpfc_sli_hbq_setup: configure and initialize HBQs. + * @phba: Pointer to HBA context object. + * + * This function is called during the SLI initialization to configure + * all the HBQs and post buffers to the HBQ. The caller is not + * required to hold any locks. This function will return zero if successful + * else it will return negative error code. + **/ static int lpfc_sli_hbq_setup(struct lpfc_hba *phba) { @@ -2415,15 +3047,26 @@ lpfc_sli_hbq_setup(struct lpfc_hba *phba) mempool_free(pmb, phba->mbox_mem_pool); /* Initially populate or replenish the HBQs */ - for (hbqno = 0; hbqno < hbq_count; ++hbqno) { - if (lpfc_sli_hbqbuf_init_hbqs(phba, hbqno)) - return -ENOMEM; - } + for (hbqno = 0; hbqno < hbq_count; ++hbqno) + lpfc_sli_hbqbuf_init_hbqs(phba, hbqno); return 0; } -static int -lpfc_do_config_port(struct lpfc_hba *phba, int sli_mode) +/** + * lpfc_sli_config_port: Issue config port mailbox command. + * @phba: Pointer to HBA context object. + * @sli_mode: sli mode - 2/3 + * + * This function is called by the sli intialization code path + * to issue config_port mailbox command. This function restarts the + * HBA firmware and issues a config_port mailbox command to configure + * the SLI interface in the sli mode specified by sli_mode + * variable. The caller is not required to hold any locks. + * The function returns 0 if successful, else returns negative error + * code. + **/ +int +lpfc_sli_config_port(struct lpfc_hba *phba, int sli_mode) { LPFC_MBOXQ_t *pmb; uint32_t resetcount = 0, rc = 0, done = 0; @@ -2460,13 +3103,15 @@ lpfc_do_config_port(struct lpfc_hba *phba, int sli_mode) if (rc == -ERESTART) { phba->link_state = LPFC_LINK_UNKNOWN; continue; - } else if (rc) { + } else if (rc) break; - } - phba->link_state = LPFC_INIT_MBX_CMDS; lpfc_config_port(phba, pmb); rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL); + phba->sli3_options &= ~(LPFC_SLI3_NPIV_ENABLED | + LPFC_SLI3_HBQ_ENABLED | + LPFC_SLI3_CRP_ENABLED | + LPFC_SLI3_INB_ENABLED); if (rc != MBX_SUCCESS) { lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "0442 Adapter failed to init, mbxCmd x%x " @@ -2476,30 +3121,64 @@ lpfc_do_config_port(struct lpfc_hba *phba, int sli_mode) phba->sli.sli_flag &= ~LPFC_SLI2_ACTIVE; spin_unlock_irq(&phba->hbalock); rc = -ENXIO; - } else { + } else done = 1; - phba->max_vpi = (phba->max_vpi && - pmb->mb.un.varCfgPort.gmv) != 0 - ? pmb->mb.un.varCfgPort.max_vpi - : 0; - } } - if (!done) { rc = -EINVAL; goto do_prep_failed; } - - if ((pmb->mb.un.varCfgPort.sli_mode == 3) && - (!pmb->mb.un.varCfgPort.cMA)) { - rc = -ENXIO; + if (pmb->mb.un.varCfgPort.sli_mode == 3) { + if (!pmb->mb.un.varCfgPort.cMA) { + rc = -ENXIO; + goto do_prep_failed; + } + if (phba->max_vpi && pmb->mb.un.varCfgPort.gmv) { + phba->sli3_options |= LPFC_SLI3_NPIV_ENABLED; + phba->max_vpi = pmb->mb.un.varCfgPort.max_vpi; + } else + phba->max_vpi = 0; + if (pmb->mb.un.varCfgPort.gerbm) + phba->sli3_options |= LPFC_SLI3_HBQ_ENABLED; + if (pmb->mb.un.varCfgPort.gcrp) + phba->sli3_options |= LPFC_SLI3_CRP_ENABLED; + if (pmb->mb.un.varCfgPort.ginb) { + phba->sli3_options |= LPFC_SLI3_INB_ENABLED; + phba->port_gp = phba->mbox->us.s3_inb_pgp.port; + phba->inb_ha_copy = &phba->mbox->us.s3_inb_pgp.ha_copy; + phba->inb_counter = &phba->mbox->us.s3_inb_pgp.counter; + phba->inb_last_counter = + phba->mbox->us.s3_inb_pgp.counter; + } else { + phba->port_gp = phba->mbox->us.s3_pgp.port; + phba->inb_ha_copy = NULL; + phba->inb_counter = NULL; + } + } else { + phba->port_gp = phba->mbox->us.s2.port; + phba->inb_ha_copy = NULL; + phba->inb_counter = NULL; + phba->max_vpi = 0; } - do_prep_failed: mempool_free(pmb, phba->mbox_mem_pool); return rc; } + +/** + * lpfc_sli_hba_setup: SLI intialization function. + * @phba: Pointer to HBA context object. + * + * This function is the main SLI intialization function. This function + * is called by the HBA intialization code, HBA reset code and HBA + * error attention handler code. Caller is not required to hold any + * locks. This function issues config_port mailbox command to configure + * the SLI, setup iocb rings and HBQ rings. In the end the function + * calls the config_port_post function to issue init_link mailbox + * command and to start the discovery. The function will return zero + * if successful, else it will return negative error code. + **/ int lpfc_sli_hba_setup(struct lpfc_hba *phba) { @@ -2528,22 +3207,20 @@ lpfc_sli_hba_setup(struct lpfc_hba *phba) break; } - rc = lpfc_do_config_port(phba, mode); + rc = lpfc_sli_config_port(phba, mode); + if (rc && lpfc_sli_mode == 3) lpfc_printf_log(phba, KERN_ERR, LOG_INIT | LOG_VPORT, "1820 Unable to select SLI-3. " "Not supported by adapter.\n"); if (rc && mode != 2) - rc = lpfc_do_config_port(phba, 2); + rc = lpfc_sli_config_port(phba, 2); if (rc) goto lpfc_sli_hba_setup_error; if (phba->sli_rev == 3) { phba->iocb_cmd_size = SLI3_IOCB_CMD_SIZE; phba->iocb_rsp_size = SLI3_IOCB_RSP_SIZE; - phba->sli3_options |= LPFC_SLI3_ENABLED; - phba->sli3_options |= LPFC_SLI3_HBQ_ENABLED; - } else { phba->iocb_cmd_size = SLI2_IOCB_CMD_SIZE; phba->iocb_rsp_size = SLI2_IOCB_RSP_SIZE; @@ -2558,8 +3235,7 @@ lpfc_sli_hba_setup(struct lpfc_hba *phba) if (rc) goto lpfc_sli_hba_setup_error; - /* Init HBQs */ - + /* Init HBQs */ if (phba->sli3_options & LPFC_SLI3_HBQ_ENABLED) { rc = lpfc_sli_hbq_setup(phba); if (rc) @@ -2581,19 +3257,19 @@ lpfc_sli_hba_setup_error: return rc; } -/*! lpfc_mbox_timeout - * - * \pre - * \post - * \param hba Pointer to per struct lpfc_hba structure - * \param l1 Pointer to the driver's mailbox queue. - * \return - * void - * - * \b Description: + +/** + * lpfc_mbox_timeout: Timeout call back function for mbox timer. + * @ptr: context object - pointer to hba structure. * - * This routine handles mailbox timeout events at timer interrupt context. - */ + * This is the callback function for mailbox timer. The mailbox + * timer is armed when a new mailbox command is issued and the timer + * is deleted when the mailbox complete. The function is called by + * the kernel timer code when a mailbox does not complete within + * expected time. This function wakes up the worker thread to + * process the mailbox timeout and returns. All the processing is + * done by the worker thread function lpfc_mbox_timeout_handler. + **/ void lpfc_mbox_timeout(unsigned long ptr) { @@ -2612,6 +3288,15 @@ lpfc_mbox_timeout(unsigned long ptr) return; } + +/** + * lpfc_mbox_timeout_handler: Worker thread function to handle mailbox timeout. + * @phba: Pointer to HBA context object. + * + * This function is called from worker thread when a mailbox command times out. + * The caller is not required to hold any locks. This function will reset the + * HBA and recover all the pending commands. + **/ void lpfc_mbox_timeout_handler(struct lpfc_hba *phba) { @@ -2666,6 +3351,32 @@ lpfc_mbox_timeout_handler(struct lpfc_hba *phba) return; } +/** + * lpfc_sli_issue_mbox: Issue a mailbox command to firmware. + * @phba: Pointer to HBA context object. + * @pmbox: Pointer to mailbox object. + * @flag: Flag indicating how the mailbox need to be processed. + * + * This function is called by discovery code and HBA management code + * to submit a mailbox command to firmware. This function gets the + * hbalock to protect the data structures. + * The mailbox command can be submitted in polling mode, in which case + * this function will wait in a polling loop for the completion of the + * mailbox. + * If the mailbox is submitted in no_wait mode (not polling) the + * function will submit the command and returns immediately without waiting + * for the mailbox completion. The no_wait is supported only when HBA + * is in SLI2/SLI3 mode - interrupts are enabled. + * The SLI interface allows only one mailbox pending at a time. If the + * mailbox is issued in polling mode and there is already a mailbox + * pending, then the function will return an error. If the mailbox is issued + * in NO_WAIT mode and there is a mailbox pending already, the function + * will return MBX_BUSY after queuing the mailbox into mailbox queue. + * The sli layer owns the mailbox object until the completion of mailbox + * command if this function return MBX_BUSY or MBX_SUCCESS. For all other + * return codes the caller owns the mailbox command after the return of + * the function. + **/ int lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag) { @@ -2676,7 +3387,7 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag) int i; unsigned long timeout; unsigned long drvr_flag = 0; - volatile uint32_t word0, ldata; + uint32_t word0, ldata; void __iomem *to_slim; int processing_queue = 0; @@ -2836,12 +3547,11 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag) if (psli->sli_flag & LPFC_SLI2_ACTIVE) { /* First copy command data to host SLIM area */ - lpfc_sli_pcimem_bcopy(mb, &phba->slim2p->mbx, MAILBOX_CMD_SIZE); + lpfc_sli_pcimem_bcopy(mb, phba->mbox, MAILBOX_CMD_SIZE); } else { if (mb->mbxCommand == MBX_CONFIG_PORT) { /* copy command data into host mbox for cmpl */ - lpfc_sli_pcimem_bcopy(mb, &phba->slim2p->mbx, - MAILBOX_CMD_SIZE); + lpfc_sli_pcimem_bcopy(mb, phba->mbox, MAILBOX_CMD_SIZE); } /* First copy mbox command data to HBA SLIM, skip past first @@ -2851,7 +3561,7 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag) MAILBOX_CMD_SIZE - sizeof (uint32_t)); /* Next copy over first word, with mbxOwner set */ - ldata = *((volatile uint32_t *)mb); + ldata = *((uint32_t *)mb); to_slim = phba->MBslimaddr; writel(ldata, to_slim); readl(to_slim); /* flush */ @@ -2883,7 +3593,7 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag) if (psli->sli_flag & LPFC_SLI2_ACTIVE) { /* First read mbox status word */ - word0 = *((volatile uint32_t *)&phba->slim2p->mbx); + word0 = *((uint32_t *)phba->mbox); word0 = le32_to_cpu(word0); } else { /* First read mbox status word */ @@ -2922,12 +3632,11 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag) if (psli->sli_flag & LPFC_SLI2_ACTIVE) { /* First copy command data */ - word0 = *((volatile uint32_t *) - &phba->slim2p->mbx); + word0 = *((uint32_t *)phba->mbox); word0 = le32_to_cpu(word0); if (mb->mbxCommand == MBX_CONFIG_PORT) { MAILBOX_t *slimmb; - volatile uint32_t slimword0; + uint32_t slimword0; /* Check real SLIM for any errors */ slimword0 = readl(phba->MBslimaddr); slimmb = (MAILBOX_t *) & slimword0; @@ -2948,8 +3657,7 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag) if (psli->sli_flag & LPFC_SLI2_ACTIVE) { /* copy results back to user */ - lpfc_sli_pcimem_bcopy(&phba->slim2p->mbx, mb, - MAILBOX_CMD_SIZE); + lpfc_sli_pcimem_bcopy(phba->mbox, mb, MAILBOX_CMD_SIZE); } else { /* First copy command data */ lpfc_memcpy_from_slim(mb, phba->MBslimaddr, @@ -2980,9 +3688,16 @@ out_not_finished: return MBX_NOT_FINISHED; } -/* - * Caller needs to hold lock. - */ +/** + * __lpfc_sli_ringtx_put: Add an iocb to the txq. + * @phba: Pointer to HBA context object. + * @pring: Pointer to driver SLI ring object. + * @piocb: Pointer to address of newly added command iocb. + * + * This function is called with hbalock held to add a command + * iocb to the txq when SLI layer cannot submit the command iocb + * to the ring. + **/ static void __lpfc_sli_ringtx_put(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, struct lpfc_iocbq *piocb) @@ -2992,6 +3707,23 @@ __lpfc_sli_ringtx_put(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, pring->txq_cnt++; } +/** + * lpfc_sli_next_iocb: Get the next iocb in the txq. + * @phba: Pointer to HBA context object. + * @pring: Pointer to driver SLI ring object. + * @piocb: Pointer to address of newly added command iocb. + * + * This function is called with hbalock held before a new + * iocb is submitted to the firmware. This function checks + * txq to flush the iocbs in txq to Firmware before + * submitting new iocbs to the Firmware. + * If there are iocbs in the txq which need to be submitted + * to firmware, lpfc_sli_next_iocb returns the first element + * of the txq after dequeuing it from txq. + * If there is no iocb in the txq then the function will return + * *piocb and *piocb is set to NULL. Caller needs to check + * *piocb to find if there are more commands in the txq. + **/ static struct lpfc_iocbq * lpfc_sli_next_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, struct lpfc_iocbq **piocb) @@ -3007,9 +3739,30 @@ lpfc_sli_next_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, return nextiocb; } -/* - * Lockless version of lpfc_sli_issue_iocb. - */ +/** + * __lpfc_sli_issue_iocb: Lockless version of lpfc_sli_issue_iocb. + * @phba: Pointer to HBA context object. + * @pring: Pointer to driver SLI ring object. + * @piocb: Pointer to command iocb. + * @flag: Flag indicating if this command can be put into txq. + * + * __lpfc_sli_issue_iocb is used by other functions in the driver + * to issue an iocb command to the HBA. If the PCI slot is recovering + * from error state or if HBA is resetting or if LPFC_STOP_IOCB_EVENT + * flag is turned on, the function returns IOCB_ERROR. + * When the link is down, this function allows only iocbs for + * posting buffers. + * This function finds next available slot in the command ring and + * posts the command to the available slot and writes the port + * attention register to request HBA start processing new iocb. + * If there is no slot available in the ring and + * flag & SLI_IOCB_RET_IOCB is set, the new iocb is added to the + * txq, otherwise the function returns IOCB_BUSY. + * + * This function is called with hbalock held. + * The function will return success after it successfully submit the + * iocb to firmware or after adding to the txq. + **/ static int __lpfc_sli_issue_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, struct lpfc_iocbq *piocb, uint32_t flag) @@ -3052,6 +3805,16 @@ __lpfc_sli_issue_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, * can be issued if the link is not up. */ switch (piocb->iocb.ulpCommand) { + case CMD_GEN_REQUEST64_CR: + case CMD_GEN_REQUEST64_CX: + if (!(phba->sli.sli_flag & LPFC_MENLO_MAINT) || + (piocb->iocb.un.genreq64.w5.hcsw.Rctl != + FC_FCP_CMND) || + (piocb->iocb.un.genreq64.w5.hcsw.Type != + MENLO_TRANSPORT_TYPE)) + + goto iocb_busy; + break; case CMD_QUE_RING_BUF_CN: case CMD_QUE_RING_BUF64_CN: /* @@ -3106,6 +3869,19 @@ __lpfc_sli_issue_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, } +/** + * lpfc_sli_issue_iocb: Wrapper function for __lpfc_sli_issue_iocb. + * @phba: Pointer to HBA context object. + * @pring: Pointer to driver SLI ring object. + * @piocb: Pointer to command iocb. + * @flag: Flag indicating if this command can be put into txq. + * + * lpfc_sli_issue_iocb is a wrapper around __lpfc_sli_issue_iocb + * function. This function gets the hbalock and calls + * __lpfc_sli_issue_iocb function and will return the error returned + * by __lpfc_sli_issue_iocb function. This wrapper is used by + * functions which do not hold hbalock. + **/ int lpfc_sli_issue_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, struct lpfc_iocbq *piocb, uint32_t flag) @@ -3120,6 +3896,17 @@ lpfc_sli_issue_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, return rc; } +/** + * lpfc_extra_ring_setup: Extra ring setup function. + * @phba: Pointer to HBA context object. + * + * This function is called while driver attaches with the + * HBA to setup the extra ring. The extra ring is used + * only when driver needs to support target mode functionality + * or IP over FC functionalities. + * + * This function is called with no lock held. + **/ static int lpfc_extra_ring_setup( struct lpfc_hba *phba) { @@ -3155,6 +3942,19 @@ lpfc_extra_ring_setup( struct lpfc_hba *phba) return 0; } +/** + * lpfc_sli_async_event_handler: ASYNC iocb handler function. + * @phba: Pointer to HBA context object. + * @pring: Pointer to driver SLI ring object. + * @iocbq: Pointer to iocb object. + * + * This function is called by the slow ring event handler + * function when there is an ASYNC event iocb in the ring. + * This function is called with no lock held. + * Currently this function handles only temperature related + * ASYNC events. The function decodes the temperature sensor + * event message and posts events for the management applications. + **/ static void lpfc_sli_async_event_handler(struct lpfc_hba * phba, struct lpfc_sli_ring * pring, struct lpfc_iocbq * iocbq) @@ -3210,6 +4010,17 @@ lpfc_sli_async_event_handler(struct lpfc_hba * phba, } +/** + * lpfc_sli_setup: SLI ring setup function. + * @phba: Pointer to HBA context object. + * + * lpfc_sli_setup sets up rings of the SLI interface with + * number of iocbs per ring and iotags. This function is + * called while driver attach to the HBA and before the + * interrupts are enabled. So there is no need for locking. + * + * This function always returns 0. + **/ int lpfc_sli_setup(struct lpfc_hba *phba) { @@ -3321,6 +4132,17 @@ lpfc_sli_setup(struct lpfc_hba *phba) return 0; } +/** + * lpfc_sli_queue_setup: Queue initialization function. + * @phba: Pointer to HBA context object. + * + * lpfc_sli_queue_setup sets up mailbox queues and iocb queues for each + * ring. This function also initializes ring indices of each ring. + * This function is called during the initialization of the SLI + * interface of an HBA. + * This function is called with no lock held and always returns + * 1. + **/ int lpfc_sli_queue_setup(struct lpfc_hba *phba) { @@ -3349,6 +4171,23 @@ lpfc_sli_queue_setup(struct lpfc_hba *phba) return 1; } +/** + * lpfc_sli_host_down: Vport cleanup function. + * @vport: Pointer to virtual port object. + * + * lpfc_sli_host_down is called to clean up the resources + * associated with a vport before destroying virtual + * port data structures. + * This function does following operations: + * - Free discovery resources associated with this virtual + * port. + * - Free iocbs associated with this virtual port in + * the txq. + * - Send abort for all iocb commands associated with this + * vport in txcmplq. + * + * This function is called with no lock held and always returns 1. + **/ int lpfc_sli_host_down(struct lpfc_vport *vport) { @@ -3411,6 +4250,21 @@ lpfc_sli_host_down(struct lpfc_vport *vport) return 1; } +/** + * lpfc_sli_hba_down: Resource cleanup function for the HBA. + * @phba: Pointer to HBA context object. + * + * This function cleans up all iocb, buffers, mailbox commands + * while shutting down the HBA. This function is called with no + * lock held and always returns 1. + * This function does the following to cleanup driver resources: + * - Free discovery resources for each virtual port + * - Cleanup any pending fabric iocbs + * - Iterate through the iocb txq and free each entry + * in the list. + * - Free up any buffer posted to the HBA + * - Free mailbox commands in the mailbox queue. + **/ int lpfc_sli_hba_down(struct lpfc_hba *phba) { @@ -3501,6 +4355,18 @@ lpfc_sli_hba_down(struct lpfc_hba *phba) return 1; } +/** + * lpfc_sli_pcimem_bcopy: SLI memory copy function. + * @srcp: Source memory pointer. + * @destp: Destination memory pointer. + * @cnt: Number of words required to be copied. + * + * This function is used for copying data between driver memory + * and the SLI memory. This function also changes the endianness + * of each word if native endianness is different from SLI + * endianness. This function can be called with or without + * lock. + **/ void lpfc_sli_pcimem_bcopy(void *srcp, void *destp, uint32_t cnt) { @@ -3518,6 +4384,17 @@ lpfc_sli_pcimem_bcopy(void *srcp, void *destp, uint32_t cnt) } } + +/** + * lpfc_sli_ringpostbuf_put: Function to add a buffer to postbufq. + * @phba: Pointer to HBA context object. + * @pring: Pointer to driver SLI ring object. + * @mp: Pointer to driver buffer object. + * + * This function is called with no lock held. + * It always return zero after adding the buffer to the postbufq + * buffer list. + **/ int lpfc_sli_ringpostbuf_put(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, struct lpfc_dmabuf *mp) @@ -3531,6 +4408,18 @@ lpfc_sli_ringpostbuf_put(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, return 0; } +/** + * lpfc_sli_get_buffer_tag: Tag allocation function for a buffer posted + * using CMD_QUE_XRI64_CX iocb. + * @phba: Pointer to HBA context object. + * + * When HBQ is enabled, buffers are searched based on tags. This function + * allocates a tag for buffer posted using CMD_QUE_XRI64_CX iocb. The + * tag is bit wise or-ed with QUE_BUFTAG_BIT to make sure that the tag + * does not conflict with tags of buffer posted for unsolicited events. + * The function returns the allocated tag. The function is called with + * no locks held. + **/ uint32_t lpfc_sli_get_buffer_tag(struct lpfc_hba *phba) { @@ -3545,6 +4434,22 @@ lpfc_sli_get_buffer_tag(struct lpfc_hba *phba) return phba->buffer_tag_count; } +/** + * lpfc_sli_ring_taggedbuf_get: Search HBQ buffer associated with + * posted using CMD_QUE_XRI64_CX iocb. + * @phba: Pointer to HBA context object. + * @pring: Pointer to driver SLI ring object. + * @tag: Buffer tag. + * + * Buffers posted using CMD_QUE_XRI64_CX iocb are in pring->postbufq + * list. After HBA DMA data to these buffers, CMD_IOCB_RET_XRI64_CX + * iocb is posted to the response ring with the tag of the buffer. + * This function searches the pring->postbufq list using the tag + * to find buffer associated with CMD_IOCB_RET_XRI64_CX + * iocb. If the buffer is found then lpfc_dmabuf object of the + * buffer is returned to the caller else NULL is returned. + * This function is called with no lock held. + **/ struct lpfc_dmabuf * lpfc_sli_ring_taggedbuf_get(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, uint32_t tag) @@ -3565,7 +4470,7 @@ lpfc_sli_ring_taggedbuf_get(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, spin_unlock_irq(&phba->hbalock); lpfc_printf_log(phba, KERN_ERR, LOG_INIT, - "0410 Cannot find virtual addr for buffer tag on " + "0402 Cannot find virtual addr for buffer tag on " "ring %d Data x%lx x%p x%p x%x\n", pring->ringno, (unsigned long) tag, slp->next, slp->prev, pring->postbufq_cnt); @@ -3573,6 +4478,23 @@ lpfc_sli_ring_taggedbuf_get(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, return NULL; } +/** + * lpfc_sli_ringpostbuf_get: SLI2 buffer search function for + * unsolicited ct and els events. + * @phba: Pointer to HBA context object. + * @pring: Pointer to driver SLI ring object. + * @phys: DMA address of the buffer. + * + * This function searches the buffer list using the dma_address + * of unsolicited event to find the driver's lpfc_dmabuf object + * corresponding to the dma_address. The function returns the + * lpfc_dmabuf object if a buffer is found else it returns NULL. + * This function is called by the ct and els unsolicited event + * handlers to get the buffer associated with the unsolicited + * event. + * + * This function is called with no lock held. + **/ struct lpfc_dmabuf * lpfc_sli_ringpostbuf_get(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, dma_addr_t phys) @@ -3600,6 +4522,17 @@ lpfc_sli_ringpostbuf_get(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, return NULL; } +/** + * lpfc_sli_abort_els_cmpl: Completion handler for the els abort iocbs. + * @phba: Pointer to HBA context object. + * @cmdiocb: Pointer to driver command iocb object. + * @rspiocb: Pointer to driver response iocb object. + * + * This function is the completion handler for the abort iocbs for + * ELS commands. This function is called from the ELS ring event + * handler with no lock held. This function frees memory resources + * associated with the abort iocb. + **/ static void lpfc_sli_abort_els_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, struct lpfc_iocbq *rspiocb) @@ -3665,6 +4598,17 @@ lpfc_sli_abort_els_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, return; } +/** + * lpfc_ignore_els_cmpl: Completion handler for aborted ELS command. + * @phba: Pointer to HBA context object. + * @cmdiocb: Pointer to driver command iocb object. + * @rspiocb: Pointer to driver response iocb object. + * + * The function is called from SLI ring event handler with no + * lock held. This function is the completion handler for ELS commands + * which are aborted. The function frees memory resources used for + * the aborted ELS commands. + **/ static void lpfc_ignore_els_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, struct lpfc_iocbq *rspiocb) @@ -3673,7 +4617,7 @@ lpfc_ignore_els_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, /* ELS cmd tag <ulpIoTag> completes */ lpfc_printf_log(phba, KERN_INFO, LOG_ELS, - "0133 Ignoring ELS cmd tag x%x completion Data: " + "0139 Ignoring ELS cmd tag x%x completion Data: " "x%x x%x x%x\n", irsp->ulpIoTag, irsp->ulpStatus, irsp->un.ulpWord[4], irsp->ulpTimeout); @@ -3684,6 +4628,17 @@ lpfc_ignore_els_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, return; } +/** + * lpfc_sli_issue_abort_iotag: Abort function for a command iocb. + * @phba: Pointer to HBA context object. + * @pring: Pointer to driver SLI ring object. + * @cmdiocb: Pointer to driver command iocb object. + * + * This function issues an abort iocb for the provided command + * iocb. This function is called with hbalock held. + * The function returns 0 when it fails due to memory allocation + * failure or when the command iocb is an abort request. + **/ int lpfc_sli_issue_abort_iotag(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, struct lpfc_iocbq *cmdiocb) @@ -3748,6 +4703,8 @@ lpfc_sli_issue_abort_iotag(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, iabt->un.acxri.abortIoTag, abtsiocbp->iotag); retval = __lpfc_sli_issue_iocb(phba, pring, abtsiocbp, 0); + if (retval) + __lpfc_sli_release_iocbq(phba, abtsiocbp); abort_iotag_exit: /* * Caller to this routine should check for IOCB_ERROR @@ -3757,6 +4714,29 @@ abort_iotag_exit: return retval; } +/** + * lpfc_sli_validate_fcp_iocb: Filtering function, used to find commands + * associated with a vport/SCSI target/lun. + * @iocbq: Pointer to driver iocb object. + * @vport: Pointer to driver virtual port object. + * @tgt_id: SCSI ID of the target. + * @lun_id: LUN ID of the scsi device. + * @ctx_cmd: LPFC_CTX_LUN/LPFC_CTX_TGT/LPFC_CTX_HOST + * + * This function acts as iocb filter for functions which abort or count + * all FCP iocbs pending on a lun/SCSI target/SCSI host. It will return + * 0 if the filtering criteria is met for the given iocb and will return + * 1 if the filtering criteria is not met. + * If ctx_cmd == LPFC_CTX_LUN, the function returns 0 only if the + * given iocb is for the SCSI device specified by vport, tgt_id and + * lun_id parameter. + * If ctx_cmd == LPFC_CTX_TGT, the function returns 0 only if the + * given iocb is for the SCSI target specified by vport and tgt_id + * parameters. + * If ctx_cmd == LPFC_CTX_HOST, the function returns 0 only if the + * given iocb is for the SCSI host associated with the given vport. + * This function is called with no locks held. + **/ static int lpfc_sli_validate_fcp_iocb(struct lpfc_iocbq *iocbq, struct lpfc_vport *vport, uint16_t tgt_id, uint64_t lun_id, @@ -3800,6 +4780,25 @@ lpfc_sli_validate_fcp_iocb(struct lpfc_iocbq *iocbq, struct lpfc_vport *vport, return rc; } +/** + * lpfc_sli_sum_iocb: Function to count the number of FCP iocbs pending. + * @vport: Pointer to virtual port. + * @tgt_id: SCSI ID of the target. + * @lun_id: LUN ID of the scsi device. + * @ctx_cmd: LPFC_CTX_LUN/LPFC_CTX_TGT/LPFC_CTX_HOST. + * + * This function returns number of FCP commands pending for the vport. + * When ctx_cmd == LPFC_CTX_LUN, the function returns number of FCP + * commands pending on the vport associated with SCSI device specified + * by tgt_id and lun_id parameters. + * When ctx_cmd == LPFC_CTX_TGT, the function returns number of FCP + * commands pending on the vport associated with SCSI target specified + * by tgt_id parameter. + * When ctx_cmd == LPFC_CTX_HOST, the function returns number of FCP + * commands pending on the vport. + * This function returns the number of iocbs which satisfy the filter. + * This function is called without any lock held. + **/ int lpfc_sli_sum_iocb(struct lpfc_vport *vport, uint16_t tgt_id, uint64_t lun_id, lpfc_ctx_cmd ctx_cmd) @@ -3819,6 +4818,17 @@ lpfc_sli_sum_iocb(struct lpfc_vport *vport, uint16_t tgt_id, uint64_t lun_id, return sum; } +/** + * lpfc_sli_abort_fcp_cmpl: Completion handler function for an aborted + * FCP iocb. + * @phba: Pointer to HBA context object + * @cmdiocb: Pointer to command iocb object. + * @rspiocb: Pointer to response iocb object. + * + * This function is called when an aborted FCP iocb completes. This + * function is called by the ring event handler with no lock held. + * This function frees the iocb. + **/ void lpfc_sli_abort_fcp_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, struct lpfc_iocbq *rspiocb) @@ -3827,6 +4837,28 @@ lpfc_sli_abort_fcp_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, return; } +/** + * lpfc_sli_abort_iocb: This function issue abort for all SCSI commands + * pending on a SCSI host(vport)/target/lun. + * @vport: Pointer to virtual port. + * @pring: Pointer to driver SLI ring object. + * @tgt_id: SCSI ID of the target. + * @lun_id: LUN ID of the scsi device. + * @abort_cmd: LPFC_CTX_LUN/LPFC_CTX_TGT/LPFC_CTX_HOST. + * + * This function sends an abort command for every SCSI command + * associated with the given virtual port pending on the ring + * filtered by lpfc_sli_validate_fcp_iocb function. + * When abort_cmd == LPFC_CTX_LUN, the function sends abort only to the + * FCP iocbs associated with lun specified by tgt_id and lun_id + * parameters + * When abort_cmd == LPFC_CTX_TGT, the function sends abort only to the + * FCP iocbs associated with SCSI target specified by tgt_id parameter. + * When abort_cmd == LPFC_CTX_HOST, the function sends abort to all + * FCP iocbs associated with virtual port. + * This function returns number of iocbs it failed to abort. + * This function is called with no locks held. + **/ int lpfc_sli_abort_iocb(struct lpfc_vport *vport, struct lpfc_sli_ring *pring, uint16_t tgt_id, uint64_t lun_id, lpfc_ctx_cmd abort_cmd) @@ -3878,6 +4910,24 @@ lpfc_sli_abort_iocb(struct lpfc_vport *vport, struct lpfc_sli_ring *pring, return errcnt; } +/** + * lpfc_sli_wake_iocb_wait: iocb completion handler for iocb issued using + * lpfc_sli_issue_iocb_wait. + * @phba: Pointer to HBA context object. + * @cmdiocbq: Pointer to command iocb. + * @rspiocbq: Pointer to response iocb. + * + * This function is the completion handler for iocbs issued using + * lpfc_sli_issue_iocb_wait function. This function is called by the + * ring event handler function without any lock held. This function + * can be called from both worker thread context and interrupt + * context. This function also can be called from other thread which + * cleans up the SLI layer objects. + * This function copy the contents of the response iocb to the + * response iocb memory object provided by the caller of + * lpfc_sli_issue_iocb_wait and then wakes up the thread which + * sleeps for the iocb completion. + **/ static void lpfc_sli_wake_iocb_wait(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocbq, @@ -3899,13 +4949,36 @@ lpfc_sli_wake_iocb_wait(struct lpfc_hba *phba, return; } -/* - * Issue the caller's iocb and wait for its completion, but no longer than the - * caller's timeout. Note that iocb_flags is cleared before the - * lpfc_sli_issue_call since the wake routine sets a unique value and by - * definition this is a wait function. - */ - +/** + * lpfc_sli_issue_iocb_wait: Synchronous function to issue iocb commands. + * @phba: Pointer to HBA context object.. + * @pring: Pointer to sli ring. + * @piocb: Pointer to command iocb. + * @prspiocbq: Pointer to response iocb. + * @timeout: Timeout in number of seconds. + * + * This function issues the iocb to firmware and waits for the + * iocb to complete. If the iocb command is not + * completed within timeout seconds, it returns IOCB_TIMEDOUT. + * Caller should not free the iocb resources if this function + * returns IOCB_TIMEDOUT. + * The function waits for the iocb completion using an + * non-interruptible wait. + * This function will sleep while waiting for iocb completion. + * So, this function should not be called from any context which + * does not allow sleeping. Due to the same reason, this function + * cannot be called with interrupt disabled. + * This function assumes that the iocb completions occur while + * this function sleep. So, this function cannot be called from + * the thread which process iocb completion for this ring. + * This function clears the iocb_flag of the iocb object before + * issuing the iocb and the iocb completion handler sets this + * flag and wakes this thread when the iocb completes. + * The contents of the response iocb will be copied to prspiocbq + * by the completion handler when the command completes. + * This function returns IOCB_SUCCESS when success. + * This function is called with no lock held. + **/ int lpfc_sli_issue_iocb_wait(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, @@ -3963,7 +5036,7 @@ lpfc_sli_issue_iocb_wait(struct lpfc_hba *phba, } } else { lpfc_printf_log(phba, KERN_INFO, LOG_SLI, - ":0332 IOCB wait issue failed, Data x%x\n", + "0332 IOCB wait issue failed, Data x%x\n", retval); retval = IOCB_ERROR; } @@ -3983,6 +5056,32 @@ lpfc_sli_issue_iocb_wait(struct lpfc_hba *phba, return retval; } +/** + * lpfc_sli_issue_mbox_wait: Synchronous function to issue mailbox. + * @phba: Pointer to HBA context object. + * @pmboxq: Pointer to driver mailbox object. + * @timeout: Timeout in number of seconds. + * + * This function issues the mailbox to firmware and waits for the + * mailbox command to complete. If the mailbox command is not + * completed within timeout seconds, it returns MBX_TIMEOUT. + * The function waits for the mailbox completion using an + * interruptible wait. If the thread is woken up due to a + * signal, MBX_TIMEOUT error is returned to the caller. Caller + * should not free the mailbox resources, if this function returns + * MBX_TIMEOUT. + * This function will sleep while waiting for mailbox completion. + * So, this function should not be called from any context which + * does not allow sleeping. Due to the same reason, this function + * cannot be called with interrupt disabled. + * This function assumes that the mailbox completion occurs while + * this function sleep. So, this function cannot be called from + * the worker thread which processes mailbox completion. + * This function is called in the context of HBA management + * applications. + * This function returns MBX_SUCCESS when successful. + * This function is called with no lock held. + **/ int lpfc_sli_issue_mbox_wait(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq, uint32_t timeout) @@ -4027,6 +5126,18 @@ lpfc_sli_issue_mbox_wait(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq, return retval; } +/** + * lpfc_sli_flush_mbox_queue: mailbox queue cleanup function. + * @phba: Pointer to HBA context. + * + * This function is called to cleanup any pending mailbox + * objects in the driver queue before bringing the HBA offline. + * This function is called while resetting the HBA. + * The function is called without any lock held. The function + * takes hbalock to update SLI data structure. + * This function returns 1 when there is an active mailbox + * command pending else returns 0. + **/ int lpfc_sli_flush_mbox_queue(struct lpfc_hba * phba) { @@ -4058,8 +5169,74 @@ lpfc_sli_flush_mbox_queue(struct lpfc_hba * phba) return (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE) ? 1 : 0; } +/** + * lpfc_sli_check_eratt: check error attention events + * @phba: Pointer to HBA context. + * + * This function is called form timer soft interrupt context to check HBA's + * error attention register bit for error attention events. + * + * This fucntion returns 1 when there is Error Attention in the Host Attention + * Register and returns 0 otherwise. + **/ +int +lpfc_sli_check_eratt(struct lpfc_hba *phba) +{ + uint32_t ha_copy; + + /* If somebody is waiting to handle an eratt, don't process it + * here. The brdkill function will do this. + */ + if (phba->link_flag & LS_IGNORE_ERATT) + return 0; + + /* Check if interrupt handler handles this ERATT */ + spin_lock_irq(&phba->hbalock); + if (phba->hba_flag & HBA_ERATT_HANDLED) { + /* Interrupt handler has handled ERATT */ + spin_unlock_irq(&phba->hbalock); + return 0; + } + + /* Read chip Host Attention (HA) register */ + ha_copy = readl(phba->HAregaddr); + if (ha_copy & HA_ERATT) { + /* Read host status register to retrieve error event */ + lpfc_sli_read_hs(phba); + /* Set the driver HA work bitmap */ + phba->work_ha |= HA_ERATT; + /* Indicate polling handles this ERATT */ + phba->hba_flag |= HBA_ERATT_HANDLED; + spin_unlock_irq(&phba->hbalock); + return 1; + } + spin_unlock_irq(&phba->hbalock); + return 0; +} + +/** + * lpfc_sp_intr_handler: The slow-path interrupt handler of lpfc driver. + * @irq: Interrupt number. + * @dev_id: The device context pointer. + * + * This function is directly called from the PCI layer as an interrupt + * service routine when the device is enabled with MSI-X multi-message + * interrupt mode and there are slow-path events in the HBA. However, + * when the device is enabled with either MSI or Pin-IRQ interrupt mode, + * this function is called as part of the device-level interrupt handler. + * When the PCI slot is in error recovery or the HBA is undergoing + * initialization, the interrupt handler will not process the interrupt. + * The link attention and ELS ring attention events are handled by the + * worker thread. The interrupt handler signals the worker thread and + * and returns for these events. This function is called without any + * lock held. It gets the hbalock to access and update SLI data + * structures. + * + * This function returns IRQ_HANDLED when interrupt is handled else it + * returns IRQ_NONE. + **/ irqreturn_t -lpfc_intr_handler(int irq, void *dev_id) +lpfc_sp_intr_handler(int irq, void *dev_id) { struct lpfc_hba *phba; uint32_t ha_copy; @@ -4078,48 +5255,52 @@ lpfc_intr_handler(int irq, void *dev_id) * Get the driver's phba structure from the dev_id and * assume the HBA is not interrupting. */ - phba = (struct lpfc_hba *) dev_id; + phba = (struct lpfc_hba *)dev_id; if (unlikely(!phba)) return IRQ_NONE; - /* If the pci channel is offline, ignore all the interrupts. */ - if (unlikely(pci_channel_offline(phba->pcidev))) - return IRQ_NONE; - - phba->sli.slistat.sli_intr++; - /* - * Call the HBA to see if it is interrupting. If not, don't claim - * the interrupt - */ - - /* Ignore all interrupts during initialization. */ - if (unlikely(phba->link_state < LPFC_LINK_DOWN)) - return IRQ_NONE; - - /* - * Read host attention register to determine interrupt source - * Clear Attention Sources, except Error Attention (to - * preserve status) and Link Attention - */ - spin_lock(&phba->hbalock); - ha_copy = readl(phba->HAregaddr); - /* If somebody is waiting to handle an eratt don't process it - * here. The brdkill function will do this. + * Stuff needs to be attented to when this function is invoked as an + * individual interrupt handler in MSI-X multi-message interrupt mode */ - if (phba->link_flag & LS_IGNORE_ERATT) - ha_copy &= ~HA_ERATT; - writel((ha_copy & ~(HA_LATT | HA_ERATT)), phba->HAregaddr); - readl(phba->HAregaddr); /* flush */ - spin_unlock(&phba->hbalock); - - if (unlikely(!ha_copy)) - return IRQ_NONE; + if (phba->intr_type == MSIX) { + /* If the pci channel is offline, ignore all the interrupts */ + if (unlikely(pci_channel_offline(phba->pcidev))) + return IRQ_NONE; + /* Update device-level interrupt statistics */ + phba->sli.slistat.sli_intr++; + /* Ignore all interrupts during initialization. */ + if (unlikely(phba->link_state < LPFC_LINK_DOWN)) + return IRQ_NONE; + /* Need to read HA REG for slow-path events */ + spin_lock(&phba->hbalock); + ha_copy = readl(phba->HAregaddr); + /* If somebody is waiting to handle an eratt don't process it + * here. The brdkill function will do this. + */ + if (phba->link_flag & LS_IGNORE_ERATT) + ha_copy &= ~HA_ERATT; + /* Check the need for handling ERATT in interrupt handler */ + if (ha_copy & HA_ERATT) { + if (phba->hba_flag & HBA_ERATT_HANDLED) + /* ERATT polling has handled ERATT */ + ha_copy &= ~HA_ERATT; + else + /* Indicate interrupt handler handles ERATT */ + phba->hba_flag |= HBA_ERATT_HANDLED; + } + /* Clear up only attention source related to slow-path */ + writel((ha_copy & (HA_MBATT | HA_R2_CLR_MSK)), + phba->HAregaddr); + readl(phba->HAregaddr); /* flush */ + spin_unlock(&phba->hbalock); + } else + ha_copy = phba->ha_copy; work_ha_copy = ha_copy & phba->work_ha_mask; - if (unlikely(work_ha_copy)) { + if (work_ha_copy) { if (work_ha_copy & HA_LATT) { if (phba->sli.sli_flag & LPFC_PROCESS_LA) { /* @@ -4138,7 +5319,7 @@ lpfc_intr_handler(int irq, void *dev_id) work_ha_copy &= ~HA_LATT; } - if (work_ha_copy & ~(HA_ERATT|HA_MBATT|HA_LATT)) { + if (work_ha_copy & ~(HA_ERATT | HA_MBATT | HA_LATT)) { /* * Turn off Slow Rings interrupts, LPFC_ELS_RING is * the only slow ring. @@ -4179,31 +5360,13 @@ lpfc_intr_handler(int irq, void *dev_id) spin_unlock(&phba->hbalock); } } - - if (work_ha_copy & HA_ERATT) { - /* - * There was a link/board error. Read the - * status register to retrieve the error event - * and process it. - */ - phba->sli.slistat.err_attn_event++; - /* Save status info */ - phba->work_hs = readl(phba->HSregaddr); - phba->work_status[0] = readl(phba->MBslimaddr + 0xa8); - phba->work_status[1] = readl(phba->MBslimaddr + 0xac); - - /* Clear Chip error bit */ - writel(HA_ERATT, phba->HAregaddr); - readl(phba->HAregaddr); /* flush */ - phba->pport->stopped = 1; - } - spin_lock(&phba->hbalock); - if ((work_ha_copy & HA_MBATT) && - (phba->sli.mbox_active)) { + if (work_ha_copy & HA_ERATT) + lpfc_sli_read_hs(phba); + if ((work_ha_copy & HA_MBATT) && (phba->sli.mbox_active)) { pmb = phba->sli.mbox_active; pmbox = &pmb->mb; - mbox = &phba->slim2p->mbx; + mbox = phba->mbox; vport = pmb->vport; /* First check out the status word */ @@ -4270,7 +5433,7 @@ lpfc_intr_handler(int irq, void *dev_id) lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI, - "0306 rc should have" + "0350 rc should have" "been MBX_BUSY"); goto send_current_mbox; } @@ -4283,6 +5446,7 @@ lpfc_intr_handler(int irq, void *dev_id) } } else spin_unlock(&phba->hbalock); + if ((work_ha_copy & HA_MBATT) && (phba->sli.mbox_active == NULL)) { send_current_mbox: @@ -4302,15 +5466,74 @@ send_current_mbox: spin_unlock(&phba->hbalock); lpfc_worker_wake_up(phba); } + return IRQ_HANDLED; - ha_copy &= ~(phba->work_ha_mask); +} /* lpfc_sp_intr_handler */ + +/** + * lpfc_fp_intr_handler: The fast-path interrupt handler of lpfc driver. + * @irq: Interrupt number. + * @dev_id: The device context pointer. + * + * This function is directly called from the PCI layer as an interrupt + * service routine when the device is enabled with MSI-X multi-message + * interrupt mode and there is a fast-path FCP IOCB ring event in the + * HBA. However, when the device is enabled with either MSI or Pin-IRQ + * interrupt mode, this function is called as part of the device-level + * interrupt handler. When the PCI slot is in error recovery or the HBA + * is undergoing initialization, the interrupt handler will not process + * the interrupt. The SCSI FCP fast-path ring event are handled in the + * intrrupt context. This function is called without any lock held. It + * gets the hbalock to access and update SLI data structures. + * + * This function returns IRQ_HANDLED when interrupt is handled else it + * returns IRQ_NONE. + **/ +irqreturn_t +lpfc_fp_intr_handler(int irq, void *dev_id) +{ + struct lpfc_hba *phba; + uint32_t ha_copy; + unsigned long status; + + /* Get the driver's phba structure from the dev_id and + * assume the HBA is not interrupting. + */ + phba = (struct lpfc_hba *) dev_id; + + if (unlikely(!phba)) + return IRQ_NONE; + + /* + * Stuff needs to be attented to when this function is invoked as an + * individual interrupt handler in MSI-X multi-message interrupt mode + */ + if (phba->intr_type == MSIX) { + /* If pci channel is offline, ignore all the interrupts */ + if (unlikely(pci_channel_offline(phba->pcidev))) + return IRQ_NONE; + /* Update device-level interrupt statistics */ + phba->sli.slistat.sli_intr++; + /* Ignore all interrupts during initialization. */ + if (unlikely(phba->link_state < LPFC_LINK_DOWN)) + return IRQ_NONE; + /* Need to read HA REG for FCP ring and other ring events */ + ha_copy = readl(phba->HAregaddr); + /* Clear up only attention source related to fast-path */ + spin_lock(&phba->hbalock); + writel((ha_copy & (HA_R0_CLR_MSK | HA_R1_CLR_MSK)), + phba->HAregaddr); + readl(phba->HAregaddr); /* flush */ + spin_unlock(&phba->hbalock); + } else + ha_copy = phba->ha_copy; /* - * Process all events on FCP ring. Take the optimized path for - * FCP IO. Any other IO is slow path and is handled by - * the worker thread. + * Process all events on FCP ring. Take the optimized path for FCP IO. */ - status = (ha_copy & (HA_RXMASK << (4*LPFC_FCP_RING))); + ha_copy &= ~(phba->work_ha_mask); + + status = (ha_copy & (HA_RXMASK << (4*LPFC_FCP_RING))); status >>= (4*LPFC_FCP_RING); if (status & HA_RXMASK) lpfc_sli_handle_fast_ring_event(phba, @@ -4319,11 +5542,10 @@ send_current_mbox: if (phba->cfg_multi_ring_support == 2) { /* - * Process all events on extra ring. Take the optimized path - * for extra ring IO. Any other IO is slow path and is handled - * by the worker thread. + * Process all events on extra ring. Take the optimized path + * for extra ring IO. */ - status = (ha_copy & (HA_RXMASK << (4*LPFC_EXTRA_RING))); + status = (ha_copy & (HA_RXMASK << (4*LPFC_EXTRA_RING))); status >>= (4*LPFC_EXTRA_RING); if (status & HA_RXMASK) { lpfc_sli_handle_fast_ring_event(phba, @@ -4332,5 +5554,106 @@ send_current_mbox: } } return IRQ_HANDLED; +} /* lpfc_fp_intr_handler */ + +/** + * lpfc_intr_handler: The device-level interrupt handler of lpfc driver. + * @irq: Interrupt number. + * @dev_id: The device context pointer. + * + * This function is the device-level interrupt handler called from the PCI + * layer when either MSI or Pin-IRQ interrupt mode is enabled and there is + * an event in the HBA which requires driver attention. This function + * invokes the slow-path interrupt attention handling function and fast-path + * interrupt attention handling function in turn to process the relevant + * HBA attention events. This function is called without any lock held. It + * gets the hbalock to access and update SLI data structures. + * + * This function returns IRQ_HANDLED when interrupt is handled, else it + * returns IRQ_NONE. + **/ +irqreturn_t +lpfc_intr_handler(int irq, void *dev_id) +{ + struct lpfc_hba *phba; + irqreturn_t sp_irq_rc, fp_irq_rc; + unsigned long status1, status2; + + /* + * Get the driver's phba structure from the dev_id and + * assume the HBA is not interrupting. + */ + phba = (struct lpfc_hba *) dev_id; + + if (unlikely(!phba)) + return IRQ_NONE; + + /* If the pci channel is offline, ignore all the interrupts. */ + if (unlikely(pci_channel_offline(phba->pcidev))) + return IRQ_NONE; + + /* Update device level interrupt statistics */ + phba->sli.slistat.sli_intr++; + + /* Ignore all interrupts during initialization. */ + if (unlikely(phba->link_state < LPFC_LINK_DOWN)) + return IRQ_NONE; + + spin_lock(&phba->hbalock); + phba->ha_copy = readl(phba->HAregaddr); + if (unlikely(!phba->ha_copy)) { + spin_unlock(&phba->hbalock); + return IRQ_NONE; + } else if (phba->ha_copy & HA_ERATT) { + if (phba->hba_flag & HBA_ERATT_HANDLED) + /* ERATT polling has handled ERATT */ + phba->ha_copy &= ~HA_ERATT; + else + /* Indicate interrupt handler handles ERATT */ + phba->hba_flag |= HBA_ERATT_HANDLED; + } + + /* Clear attention sources except link and error attentions */ + writel((phba->ha_copy & ~(HA_LATT | HA_ERATT)), phba->HAregaddr); + readl(phba->HAregaddr); /* flush */ + spin_unlock(&phba->hbalock); + + /* + * Invokes slow-path host attention interrupt handling as appropriate. + */ + + /* status of events with mailbox and link attention */ + status1 = phba->ha_copy & (HA_MBATT | HA_LATT | HA_ERATT); + + /* status of events with ELS ring */ + status2 = (phba->ha_copy & (HA_RXMASK << (4*LPFC_ELS_RING))); + status2 >>= (4*LPFC_ELS_RING); + + if (status1 || (status2 & HA_RXMASK)) + sp_irq_rc = lpfc_sp_intr_handler(irq, dev_id); + else + sp_irq_rc = IRQ_NONE; + + /* + * Invoke fast-path host attention interrupt handling as appropriate. + */ + + /* status of events with FCP ring */ + status1 = (phba->ha_copy & (HA_RXMASK << (4*LPFC_FCP_RING))); + status1 >>= (4*LPFC_FCP_RING); + + /* status of events with extra ring */ + if (phba->cfg_multi_ring_support == 2) { + status2 = (phba->ha_copy & (HA_RXMASK << (4*LPFC_EXTRA_RING))); + status2 >>= (4*LPFC_EXTRA_RING); + } else + status2 = 0; + + if ((status1 & HA_RXMASK) || (status2 & HA_RXMASK)) + fp_irq_rc = lpfc_fp_intr_handler(irq, dev_id); + else + fp_irq_rc = IRQ_NONE; -} /* lpfc_intr_handler */ + /* Return device-level interrupt handling status */ + return (sp_irq_rc == IRQ_HANDLED) ? sp_irq_rc : fp_irq_rc; +} /* lpfc_intr_handler */ diff --git a/drivers/scsi/lpfc/lpfc_sli.h b/drivers/scsi/lpfc/lpfc_sli.h index 7249fd252cb..883938652a6 100644 --- a/drivers/scsi/lpfc/lpfc_sli.h +++ b/drivers/scsi/lpfc/lpfc_sli.h @@ -233,6 +233,7 @@ struct lpfc_sli { #define LPFC_SLI2_ACTIVE 0x200 /* SLI2 overlay in firmware is active */ #define LPFC_PROCESS_LA 0x400 /* Able to process link attention */ #define LPFC_BLOCK_MGMT_IO 0x800 /* Don't allow mgmt mbx or iocb cmds */ +#define LPFC_MENLO_MAINT 0x1000 /* need for menl fw download */ struct lpfc_sli_ring ring[LPFC_MAX_RING]; int fcp_ring; /* ring used for FCP initiator commands */ diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h index ad24cacfbe1..cc43e9de22c 100644 --- a/drivers/scsi/lpfc/lpfc_version.h +++ b/drivers/scsi/lpfc/lpfc_version.h @@ -18,9 +18,11 @@ * included with this package. * *******************************************************************/ -#define LPFC_DRIVER_VERSION "8.2.7" +#define LPFC_DRIVER_VERSION "8.2.8" -#define LPFC_DRIVER_NAME "lpfc" +#define LPFC_DRIVER_NAME "lpfc" +#define LPFC_SP_DRIVER_HANDLER_NAME "lpfc:sp" +#define LPFC_FP_DRIVER_HANDLER_NAME "lpfc:fp" #define LPFC_MODULE_DESC "Emulex LightPulse Fibre Channel SCSI driver " \ LPFC_DRIVER_VERSION diff --git a/drivers/scsi/lpfc/lpfc_vport.c b/drivers/scsi/lpfc/lpfc_vport.c index 109f89d9883..a7de1cc02b4 100644 --- a/drivers/scsi/lpfc/lpfc_vport.c +++ b/drivers/scsi/lpfc/lpfc_vport.c @@ -34,6 +34,7 @@ #include <scsi/scsi_transport_fc.h> #include "lpfc_hw.h" #include "lpfc_sli.h" +#include "lpfc_nl.h" #include "lpfc_disc.h" #include "lpfc_scsi.h" #include "lpfc.h" @@ -204,6 +205,77 @@ lpfc_unique_wwpn(struct lpfc_hba *phba, struct lpfc_vport *new_vport) return 1; } +/** + * lpfc_discovery_wait: Wait for driver discovery to quiesce. + * @vport: The virtual port for which this call is being executed. + * + * This driver calls this routine specifically from lpfc_vport_delete + * to enforce a synchronous execution of vport + * delete relative to discovery activities. The + * lpfc_vport_delete routine should not return until it + * can reasonably guarantee that discovery has quiesced. + * Post FDISC LOGO, the driver must wait until its SAN teardown is + * complete and all resources recovered before allowing + * cleanup. + * + * This routine does not require any locks held. + **/ +static void lpfc_discovery_wait(struct lpfc_vport *vport) +{ + struct lpfc_hba *phba = vport->phba; + uint32_t wait_flags = 0; + unsigned long wait_time_max; + unsigned long start_time; + + wait_flags = FC_RSCN_MODE | FC_RSCN_DISCOVERY | FC_NLP_MORE | + FC_RSCN_DEFERRED | FC_NDISC_ACTIVE | FC_DISC_TMO; + + /* + * The time constraint on this loop is a balance between the + * fabric RA_TOV value and dev_loss tmo. The driver's + * devloss_tmo is 10 giving this loop a 3x multiplier minimally. + */ + wait_time_max = msecs_to_jiffies(((phba->fc_ratov * 3) + 3) * 1000); + wait_time_max += jiffies; + start_time = jiffies; + while (time_before(jiffies, wait_time_max)) { + if ((vport->num_disc_nodes > 0) || + (vport->fc_flag & wait_flags) || + ((vport->port_state > LPFC_VPORT_FAILED) && + (vport->port_state < LPFC_VPORT_READY))) { + lpfc_printf_log(phba, KERN_INFO, LOG_VPORT, + "1833 Vport discovery quiesce Wait:" + " vpi x%x state x%x fc_flags x%x" + " num_nodes x%x, waiting 1000 msecs" + " total wait msecs x%x\n", + vport->vpi, vport->port_state, + vport->fc_flag, vport->num_disc_nodes, + jiffies_to_msecs(jiffies - start_time)); + msleep(1000); + } else { + /* Base case. Wait variants satisfied. Break out */ + lpfc_printf_log(phba, KERN_INFO, LOG_VPORT, + "1834 Vport discovery quiesced:" + " vpi x%x state x%x fc_flags x%x" + " wait msecs x%x\n", + vport->vpi, vport->port_state, + vport->fc_flag, + jiffies_to_msecs(jiffies + - start_time)); + break; + } + } + + if (time_after(jiffies, wait_time_max)) + lpfc_printf_log(phba, KERN_ERR, LOG_VPORT, + "1835 Vport discovery quiesce failed:" + " vpi x%x state x%x fc_flags x%x" + " wait msecs x%x\n", + vport->vpi, vport->port_state, + vport->fc_flag, + jiffies_to_msecs(jiffies - start_time)); +} + int lpfc_vport_create(struct fc_vport *fc_vport, bool disable) { @@ -506,8 +578,12 @@ lpfc_vport_delete(struct fc_vport *fc_vport) * initiated after we've disposed of all other resources associated * with the port. */ - if (!scsi_host_get(shost) || !scsi_host_get(shost)) + if (!scsi_host_get(shost)) + return VPORT_INVAL; + if (!scsi_host_get(shost)) { + scsi_host_put(shost); return VPORT_INVAL; + } spin_lock_irq(&phba->hbalock); vport->load_flag |= FC_UNLOADING; spin_unlock_irq(&phba->hbalock); @@ -597,11 +673,16 @@ lpfc_vport_delete(struct fc_vport *fc_vport) } vport->unreg_vpi_cmpl = VPORT_INVAL; timeout = msecs_to_jiffies(phba->fc_ratov * 2000); + if (ndlp->nlp_state == NLP_STE_UNUSED_NODE) + goto skip_logo; if (!lpfc_issue_els_npiv_logo(vport, ndlp)) while (vport->unreg_vpi_cmpl == VPORT_INVAL && timeout) timeout = schedule_timeout(timeout); } + if (!(phba->pport->load_flag & FC_UNLOADING)) + lpfc_discovery_wait(vport); + skip_logo: lpfc_cleanup(vport); lpfc_sli_host_down(vport); @@ -615,8 +696,10 @@ skip_logo: * Completion of unreg_vpi (lpfc_mbx_cmpl_unreg_vpi) * does the scsi_host_put() to release the vport. */ - lpfc_mbx_unreg_vpi(vport); - } + if (lpfc_mbx_unreg_vpi(vport)) + scsi_host_put(shost); + } else + scsi_host_put(shost); lpfc_free_vpi(phba, vport->vpi); vport->work_port_events = 0; @@ -663,3 +746,82 @@ lpfc_destroy_vport_work_array(struct lpfc_hba *phba, struct lpfc_vport **vports) scsi_host_put(lpfc_shost_from_vport(vports[i])); kfree(vports); } + + +/** + * lpfc_vport_reset_stat_data: Reset the statistical data for the vport. + * @vport: Pointer to vport object. + * + * This function resets the statistical data for the vport. This function + * is called with the host_lock held + **/ +void +lpfc_vport_reset_stat_data(struct lpfc_vport *vport) +{ + struct lpfc_nodelist *ndlp = NULL, *next_ndlp = NULL; + + list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) { + if (!NLP_CHK_NODE_ACT(ndlp)) + continue; + if (ndlp->lat_data) + memset(ndlp->lat_data, 0, LPFC_MAX_BUCKET_COUNT * + sizeof(struct lpfc_scsicmd_bkt)); + } +} + + +/** + * lpfc_alloc_bucket: Allocate data buffer required for collecting + * statistical data. + * @vport: Pointer to vport object. + * + * This function allocates data buffer required for all the FC + * nodes of the vport to collect statistical data. + **/ +void +lpfc_alloc_bucket(struct lpfc_vport *vport) +{ + struct lpfc_nodelist *ndlp = NULL, *next_ndlp = NULL; + + list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) { + if (!NLP_CHK_NODE_ACT(ndlp)) + continue; + + kfree(ndlp->lat_data); + ndlp->lat_data = NULL; + + if (ndlp->nlp_state == NLP_STE_MAPPED_NODE) { + ndlp->lat_data = kcalloc(LPFC_MAX_BUCKET_COUNT, + sizeof(struct lpfc_scsicmd_bkt), + GFP_ATOMIC); + + if (!ndlp->lat_data) + lpfc_printf_vlog(vport, KERN_ERR, LOG_NODE, + "0287 lpfc_alloc_bucket failed to " + "allocate statistical data buffer DID " + "0x%x\n", ndlp->nlp_DID); + } + } +} + +/** + * lpfc_free_bucket: Free data buffer required for collecting + * statistical data. + * @vport: Pointer to vport object. + * + * Th function frees statistical data buffer of all the FC + * nodes of the vport. + **/ +void +lpfc_free_bucket(struct lpfc_vport *vport) +{ + struct lpfc_nodelist *ndlp = NULL, *next_ndlp = NULL; + + list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) { + if (!NLP_CHK_NODE_ACT(ndlp)) + continue; + + kfree(ndlp->lat_data); + ndlp->lat_data = NULL; + } +} diff --git a/drivers/scsi/lpfc/lpfc_vport.h b/drivers/scsi/lpfc/lpfc_vport.h index 96c445333b6..90828340ace 100644 --- a/drivers/scsi/lpfc/lpfc_vport.h +++ b/drivers/scsi/lpfc/lpfc_vport.h @@ -112,4 +112,8 @@ struct vport_cmd_tag { void lpfc_vport_set_state(struct lpfc_vport *vport, enum fc_vport_state new_state); +void lpfc_vport_reset_stat_data(struct lpfc_vport *); +void lpfc_alloc_bucket(struct lpfc_vport *); +void lpfc_free_bucket(struct lpfc_vport *); + #endif /* H_LPFC_VPORT */ diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c index 97b763378e7..afe1de99876 100644 --- a/drivers/scsi/megaraid/megaraid_sas.c +++ b/drivers/scsi/megaraid/megaraid_sas.c @@ -1167,7 +1167,7 @@ static int megasas_generic_reset(struct scsi_cmnd *scmd) * cmd has not been completed within the timeout period. */ static enum -scsi_eh_timer_return megasas_reset_timer(struct scsi_cmnd *scmd) +blk_eh_timer_return megasas_reset_timer(struct scsi_cmnd *scmd) { struct megasas_cmd *cmd = (struct megasas_cmd *)scmd->SCp.ptr; struct megasas_instance *instance; @@ -1175,7 +1175,7 @@ scsi_eh_timer_return megasas_reset_timer(struct scsi_cmnd *scmd) if (time_after(jiffies, scmd->jiffies_at_alloc + (MEGASAS_DEFAULT_CMD_TIMEOUT * 2) * HZ)) { - return EH_NOT_HANDLED; + return BLK_EH_NOT_HANDLED; } instance = cmd->instance; @@ -1189,7 +1189,7 @@ scsi_eh_timer_return megasas_reset_timer(struct scsi_cmnd *scmd) spin_unlock_irqrestore(instance->host->host_lock, flags); } - return EH_RESET_TIMER; + return BLK_EH_RESET_TIMER; } /** diff --git a/drivers/scsi/ncr53c8xx.c b/drivers/scsi/ncr53c8xx.c index c57c94c0ffd..3b7240e4081 100644 --- a/drivers/scsi/ncr53c8xx.c +++ b/drivers/scsi/ncr53c8xx.c @@ -4170,8 +4170,8 @@ static int ncr_queue_command (struct ncb *np, struct scsi_cmnd *cmd) ** **---------------------------------------------------- */ - if (np->settle_time && cmd->timeout_per_command >= HZ) { - u_long tlimit = jiffies + cmd->timeout_per_command - HZ; + if (np->settle_time && cmd->request->timeout >= HZ) { + u_long tlimit = jiffies + cmd->request->timeout - HZ; if (time_after(np->settle_time, tlimit)) np->settle_time = tlimit; } diff --git a/drivers/scsi/osst.c b/drivers/scsi/osst.c index 1c79f9794f4..0ea78d9a37d 100644 --- a/drivers/scsi/osst.c +++ b/drivers/scsi/osst.c @@ -5708,7 +5708,8 @@ static int osst_sysfs_add(dev_t dev, struct device *device, struct osst_tape * S struct device *osst_member; int err; - osst_member = device_create_drvdata(osst_sysfs_class, device, dev, STp, "%s", name); + osst_member = device_create(osst_sysfs_class, device, dev, STp, + "%s", name); if (IS_ERR(osst_member)) { printk(KERN_WARNING "osst :W: Unable to add sysfs class member %s\n", name); return PTR_ERR(osst_member); diff --git a/drivers/scsi/pcmcia/aha152x_stub.c b/drivers/scsi/pcmcia/aha152x_stub.c index 2dd0dc9a9ae..165ff884f48 100644 --- a/drivers/scsi/pcmcia/aha152x_stub.c +++ b/drivers/scsi/pcmcia/aha152x_stub.c @@ -140,44 +140,41 @@ static void aha152x_detach(struct pcmcia_device *link) #define CS_CHECK(fn, ret) \ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) +static int aha152x_config_check(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cfg, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) +{ + /* For New Media T&J, look for a SCSI window */ + if (cfg->io.win[0].len >= 0x20) + p_dev->io.BasePort1 = cfg->io.win[0].base; + else if ((cfg->io.nwin > 1) && + (cfg->io.win[1].len >= 0x20)) + p_dev->io.BasePort1 = cfg->io.win[1].base; + if ((cfg->io.nwin > 0) && + (p_dev->io.BasePort1 < 0xffff)) { + if (!pcmcia_request_io(p_dev, &p_dev->io)) + return 0; + } + return -EINVAL; +} + static int aha152x_config_cs(struct pcmcia_device *link) { scsi_info_t *info = link->priv; struct aha152x_setup s; - tuple_t tuple; - cisparse_t parse; - int i, last_ret, last_fn; - u_char tuple_data[64]; + int last_ret, last_fn; struct Scsi_Host *host; - + DEBUG(0, "aha152x_config(0x%p)\n", link); - tuple.TupleData = tuple_data; - tuple.TupleDataMax = 64; - tuple.TupleOffset = 0; - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - tuple.Attributes = 0; - CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); - while (1) { - if (pcmcia_get_tuple_data(link, &tuple) != 0 || - pcmcia_parse_tuple(link, &tuple, &parse) != 0) - goto next_entry; - /* For New Media T&J, look for a SCSI window */ - if (parse.cftable_entry.io.win[0].len >= 0x20) - link->io.BasePort1 = parse.cftable_entry.io.win[0].base; - else if ((parse.cftable_entry.io.nwin > 1) && - (parse.cftable_entry.io.win[1].len >= 0x20)) - link->io.BasePort1 = parse.cftable_entry.io.win[1].base; - if ((parse.cftable_entry.io.nwin > 0) && - (link->io.BasePort1 < 0xffff)) { - link->conf.ConfigIndex = parse.cftable_entry.index; - i = pcmcia_request_io(link, &link->io); - if (i == CS_SUCCESS) break; - } - next_entry: - CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple)); + last_ret = pcmcia_loop_config(link, aha152x_config_check, NULL); + if (last_ret) { + cs_error(link, RequestIO, last_ret); + goto failed; } - + CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq)); CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf)); @@ -208,6 +205,7 @@ static int aha152x_config_cs(struct pcmcia_device *link) cs_failed: cs_error(link, last_fn, last_ret); +failed: aha152x_release_cs(link); return -ENODEV; } diff --git a/drivers/scsi/pcmcia/fdomain_stub.c b/drivers/scsi/pcmcia/fdomain_stub.c index d8b99351b05..06254f46a0d 100644 --- a/drivers/scsi/pcmcia/fdomain_stub.c +++ b/drivers/scsi/pcmcia/fdomain_stub.c @@ -123,34 +123,30 @@ static void fdomain_detach(struct pcmcia_device *link) #define CS_CHECK(fn, ret) \ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) +static int fdomain_config_check(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cfg, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) +{ + p_dev->io.BasePort1 = cfg->io.win[0].base; + return pcmcia_request_io(p_dev, &p_dev->io); +} + + static int fdomain_config(struct pcmcia_device *link) { scsi_info_t *info = link->priv; - tuple_t tuple; - cisparse_t parse; - int i, last_ret, last_fn; - u_char tuple_data[64]; + int last_ret, last_fn; char str[22]; struct Scsi_Host *host; DEBUG(0, "fdomain_config(0x%p)\n", link); - tuple.TupleData = tuple_data; - tuple.TupleDataMax = 64; - tuple.TupleOffset = 0; - - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); - while (1) { - if (pcmcia_get_tuple_data(link, &tuple) != 0 || - pcmcia_parse_tuple(link, &tuple, &parse) != 0) - goto next_entry; - link->conf.ConfigIndex = parse.cftable_entry.index; - link->io.BasePort1 = parse.cftable_entry.io.win[0].base; - i = pcmcia_request_io(link, &link->io); - if (i == CS_SUCCESS) break; - next_entry: - CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple)); + last_ret = pcmcia_loop_config(link, fdomain_config_check, NULL); + if (last_ret) { + cs_error(link, RequestIO, last_ret); + goto failed; } CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq)); @@ -181,6 +177,7 @@ static int fdomain_config(struct pcmcia_device *link) cs_failed: cs_error(link, last_fn, last_ret); +failed: fdomain_release(link); return -ENODEV; } /* fdomain_config */ diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c index 24e6cb8396e..11a61ea8d5d 100644 --- a/drivers/scsi/pcmcia/nsp_cs.c +++ b/drivers/scsi/pcmcia/nsp_cs.c @@ -1606,133 +1606,129 @@ static void nsp_cs_detach(struct pcmcia_device *link) is received, to configure the PCMCIA socket, and to make the ethernet device available to the system. ======================================================================*/ -#define CS_CHECK(fn, ret) \ -do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) -/*====================================================================*/ -static int nsp_cs_config(struct pcmcia_device *link) -{ - int ret; - scsi_info_t *info = link->priv; - tuple_t tuple; - cisparse_t parse; - int last_ret, last_fn; - unsigned char tuple_data[64]; - config_info_t conf; - win_req_t req; - memreq_t map; - cistpl_cftable_entry_t dflt = { 0 }; - struct Scsi_Host *host; - nsp_hw_data *data = &nsp_data_base; - - nsp_dbg(NSP_DEBUG_INIT, "in"); - - tuple.Attributes = 0; - tuple.TupleData = tuple_data; - tuple.TupleDataMax = sizeof(tuple_data); - tuple.TupleOffset = 0; - - /* Look up the current Vcc */ - CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(link, &conf)); - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); - while (1) { - cistpl_cftable_entry_t *cfg = &(parse.cftable_entry); +struct nsp_cs_configdata { + nsp_hw_data *data; + win_req_t req; +}; - if (pcmcia_get_tuple_data(link, &tuple) != 0 || - pcmcia_parse_tuple(link, &tuple, &parse) != 0) - goto next_entry; +static int nsp_cs_config_check(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cfg, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) +{ + struct nsp_cs_configdata *cfg_mem = priv_data; - if (cfg->flags & CISTPL_CFTABLE_DEFAULT) { dflt = *cfg; } - if (cfg->index == 0) { goto next_entry; } - link->conf.ConfigIndex = cfg->index; + if (cfg->index == 0) + return -ENODEV; - /* Does this card need audio output? */ - if (cfg->flags & CISTPL_CFTABLE_AUDIO) { - link->conf.Attributes |= CONF_ENABLE_SPKR; - link->conf.Status = CCSR_AUDIO_ENA; - } + /* Does this card need audio output? */ + if (cfg->flags & CISTPL_CFTABLE_AUDIO) { + p_dev->conf.Attributes |= CONF_ENABLE_SPKR; + p_dev->conf.Status = CCSR_AUDIO_ENA; + } - /* Use power settings for Vcc and Vpp if present */ - /* Note that the CIS values need to be rescaled */ - if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) { - if (conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM]/10000) { - goto next_entry; - } - } else if (dflt.vcc.present & (1<<CISTPL_POWER_VNOM)) { - if (conf.Vcc != dflt.vcc.param[CISTPL_POWER_VNOM]/10000) { - goto next_entry; - } + /* Use power settings for Vcc and Vpp if present */ + /* Note that the CIS values need to be rescaled */ + if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) { + if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM]/10000) + return -ENODEV; + else if (dflt->vcc.present & (1<<CISTPL_POWER_VNOM)) { + if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM]/10000) + return -ENODEV; } if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) { - link->conf.Vpp = + p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; - } else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM)) { - link->conf.Vpp = - dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000; + } else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) { + p_dev->conf.Vpp = + dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; } /* Do we need to allocate an interrupt? */ - if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1) { - link->conf.Attributes |= CONF_ENABLE_IRQ; - } + if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1) + p_dev->conf.Attributes |= CONF_ENABLE_IRQ; /* IO window settings */ - link->io.NumPorts1 = link->io.NumPorts2 = 0; - if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; + p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { + cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; if (!(io->flags & CISTPL_IO_8BIT)) - link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; if (!(io->flags & CISTPL_IO_16BIT)) - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - link->io.BasePort1 = io->win[0].base; - link->io.NumPorts1 = io->win[0].len; + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; + p_dev->io.BasePort1 = io->win[0].base; + p_dev->io.NumPorts1 = io->win[0].len; if (io->nwin > 1) { - link->io.Attributes2 = link->io.Attributes1; - link->io.BasePort2 = io->win[1].base; - link->io.NumPorts2 = io->win[1].len; + p_dev->io.Attributes2 = p_dev->io.Attributes1; + p_dev->io.BasePort2 = io->win[1].base; + p_dev->io.NumPorts2 = io->win[1].len; } /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(link, &link->io) != 0) + if (pcmcia_request_io(p_dev, &p_dev->io) != 0) goto next_entry; } - if ((cfg->mem.nwin > 0) || (dflt.mem.nwin > 0)) { - cistpl_mem_t *mem = - (cfg->mem.nwin) ? &cfg->mem : &dflt.mem; - req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM; - req.Attributes |= WIN_ENABLE; - req.Base = mem->win[0].host_addr; - req.Size = mem->win[0].len; - if (req.Size < 0x1000) { - req.Size = 0x1000; - } - req.AccessSpeed = 0; - if (pcmcia_request_window(&link, &req, &link->win) != 0) + if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) { + memreq_t map; + cistpl_mem_t *mem = + (cfg->mem.nwin) ? &cfg->mem : &dflt->mem; + cfg_mem->req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM; + cfg_mem->req.Attributes |= WIN_ENABLE; + cfg_mem->req.Base = mem->win[0].host_addr; + cfg_mem->req.Size = mem->win[0].len; + if (cfg_mem->req.Size < 0x1000) + cfg_mem->req.Size = 0x1000; + cfg_mem->req.AccessSpeed = 0; + if (pcmcia_request_window(&p_dev, &cfg_mem->req, &p_dev->win) != 0) goto next_entry; map.Page = 0; map.CardOffset = mem->win[0].card_addr; - if (pcmcia_map_mem_page(link->win, &map) != 0) + if (pcmcia_map_mem_page(p_dev->win, &map) != 0) goto next_entry; - data->MmioAddress = (unsigned long)ioremap_nocache(req.Base, req.Size); - data->MmioLength = req.Size; + cfg_mem->data->MmioAddress = (unsigned long) ioremap_nocache(cfg_mem->req.Base, cfg_mem->req.Size); + cfg_mem->data->MmioLength = cfg_mem->req.Size; } /* If we got this far, we're cool! */ - break; - - next_entry: - nsp_dbg(NSP_DEBUG_INIT, "next"); - pcmcia_disable_device(link); - CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple)); + return 0; } +next_entry: + nsp_dbg(NSP_DEBUG_INIT, "next"); + pcmcia_disable_device(p_dev); + return -ENODEV; +} + +static int nsp_cs_config(struct pcmcia_device *link) +{ + int ret; + scsi_info_t *info = link->priv; + struct nsp_cs_configdata *cfg_mem; + struct Scsi_Host *host; + nsp_hw_data *data = &nsp_data_base; + + nsp_dbg(NSP_DEBUG_INIT, "in"); + + cfg_mem = kzalloc(sizeof(cfg_mem), GFP_KERNEL); + if (!cfg_mem) + return -ENOMEM; + cfg_mem->data = data; + + ret = pcmcia_loop_config(link, nsp_cs_config_check, cfg_mem); + goto cs_failed; + if (link->conf.Attributes & CONF_ENABLE_IRQ) { - CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq)); + if (pcmcia_request_irq(link, &link->irq)) + goto cs_failed; } - CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf)); + + ret = pcmcia_request_configuration(link, &link->conf); + if (ret) + goto cs_failed; if (free_ports) { if (link->io.BasePort1) { @@ -1790,20 +1786,20 @@ static int nsp_cs_config(struct pcmcia_device *link) printk(" & 0x%04x-0x%04x", link->io.BasePort2, link->io.BasePort2+link->io.NumPorts2-1); if (link->win) - printk(", mem 0x%06lx-0x%06lx", req.Base, - req.Base+req.Size-1); + printk(", mem 0x%06lx-0x%06lx", cfg_mem->req.Base, + cfg_mem->req.Base+cfg_mem->req.Size-1); printk("\n"); + kfree(cfg_mem); return 0; cs_failed: nsp_dbg(NSP_DEBUG_INIT, "config fail"); - cs_error(link, last_fn, last_ret); nsp_cs_release(link); + kfree(cfg_mem); return -ENODEV; } /* nsp_cs_config */ -#undef CS_CHECK /*====================================================================== diff --git a/drivers/scsi/pcmcia/qlogic_stub.c b/drivers/scsi/pcmcia/qlogic_stub.c index 67c5a58d17d..20c3e5e6d88 100644 --- a/drivers/scsi/pcmcia/qlogic_stub.c +++ b/drivers/scsi/pcmcia/qlogic_stub.c @@ -195,39 +195,33 @@ static void qlogic_detach(struct pcmcia_device *link) #define CS_CHECK(fn, ret) \ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) +static int qlogic_config_check(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cfg, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) +{ + p_dev->io.BasePort1 = cfg->io.win[0].base; + p_dev->io.NumPorts1 = cfg->io.win[0].len; + + if (p_dev->io.BasePort1 == 0) + return -ENODEV; + + return pcmcia_request_io(p_dev, &p_dev->io); +} + static int qlogic_config(struct pcmcia_device * link) { scsi_info_t *info = link->priv; - tuple_t tuple; - cisparse_t parse; - int i, last_ret, last_fn; - unsigned short tuple_data[32]; + int last_ret, last_fn; struct Scsi_Host *host; DEBUG(0, "qlogic_config(0x%p)\n", link); - info->manf_id = link->manf_id; - - tuple.TupleData = (cisdata_t *) tuple_data; - tuple.TupleDataMax = 64; - tuple.TupleOffset = 0; - - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); - while (1) { - if (pcmcia_get_tuple_data(link, &tuple) != 0 || - pcmcia_parse_tuple(link, &tuple, &parse) != 0) - goto next_entry; - link->conf.ConfigIndex = parse.cftable_entry.index; - link->io.BasePort1 = parse.cftable_entry.io.win[0].base; - link->io.NumPorts1 = parse.cftable_entry.io.win[0].len; - if (link->io.BasePort1 != 0) { - i = pcmcia_request_io(link, &link->io); - if (i == CS_SUCCESS) - break; - } - next_entry: - CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple)); + last_ret = pcmcia_loop_config(link, qlogic_config_check, NULL); + if (last_ret) { + cs_error(link, RequestIO, last_ret); + goto failed; } CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq)); @@ -262,6 +256,7 @@ static int qlogic_config(struct pcmcia_device * link) cs_failed: cs_error(link, last_fn, last_ret); pcmcia_disable_device(link); +failed: return -ENODEV; } /* qlogic_config */ diff --git a/drivers/scsi/pcmcia/sym53c500_cs.c b/drivers/scsi/pcmcia/sym53c500_cs.c index 0be232b58ff..b330c11a175 100644 --- a/drivers/scsi/pcmcia/sym53c500_cs.c +++ b/drivers/scsi/pcmcia/sym53c500_cs.c @@ -700,15 +700,27 @@ static struct scsi_host_template sym53c500_driver_template = { #define CS_CHECK(fn, ret) \ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) +static int SYM53C500_config_check(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cfg, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) +{ + p_dev->io.BasePort1 = cfg->io.win[0].base; + p_dev->io.NumPorts1 = cfg->io.win[0].len; + + if (p_dev->io.BasePort1 == 0) + return -ENODEV; + + return pcmcia_request_io(p_dev, &p_dev->io); +} + static int SYM53C500_config(struct pcmcia_device *link) { struct scsi_info_t *info = link->priv; - tuple_t tuple; - cisparse_t parse; - int i, last_ret, last_fn; + int last_ret, last_fn; int irq_level, port_base; - unsigned short tuple_data[32]; struct Scsi_Host *host; struct scsi_host_template *tpnt = &sym53c500_driver_template; struct sym53c500_data *data; @@ -717,27 +729,10 @@ SYM53C500_config(struct pcmcia_device *link) info->manf_id = link->manf_id; - tuple.TupleData = (cisdata_t *)tuple_data; - tuple.TupleDataMax = 64; - tuple.TupleOffset = 0; - - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); - while (1) { - if (pcmcia_get_tuple_data(link, &tuple) != 0 || - pcmcia_parse_tuple(link, &tuple, &parse) != 0) - goto next_entry; - link->conf.ConfigIndex = parse.cftable_entry.index; - link->io.BasePort1 = parse.cftable_entry.io.win[0].base; - link->io.NumPorts1 = parse.cftable_entry.io.win[0].len; - - if (link->io.BasePort1 != 0) { - i = pcmcia_request_io(link, &link->io); - if (i == CS_SUCCESS) - break; - } -next_entry: - CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple)); + last_ret = pcmcia_loop_config(link, SYM53C500_config_check, NULL); + if (last_ret) { + cs_error(link, RequestIO, last_ret); + goto failed; } CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq)); @@ -831,6 +826,7 @@ err_release: cs_failed: cs_error(link, last_fn, last_ret); +failed: SYM53C500_release(link); return -ENODEV; } /* SYM53C500_config */ diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c index 37f9ba0cd79..b6cd12b2e99 100644 --- a/drivers/scsi/qla1280.c +++ b/drivers/scsi/qla1280.c @@ -2845,7 +2845,7 @@ qla1280_64bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp) memset(((char *)pkt + 8), 0, (REQUEST_ENTRY_SIZE - 8)); /* Set ISP command timeout. */ - pkt->timeout = cpu_to_le16(cmd->timeout_per_command/HZ); + pkt->timeout = cpu_to_le16(cmd->request->timeout/HZ); /* Set device target ID and LUN */ pkt->lun = SCSI_LUN_32(cmd); @@ -3114,7 +3114,7 @@ qla1280_32bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp) memset(((char *)pkt + 8), 0, (REQUEST_ENTRY_SIZE - 8)); /* Set ISP command timeout. */ - pkt->timeout = cpu_to_le16(cmd->timeout_per_command/HZ); + pkt->timeout = cpu_to_le16(cmd->request->timeout/HZ); /* Set device target ID and LUN */ pkt->lun = SCSI_LUN_32(cmd); diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index 45e7dcb4b34..ed731968f15 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -292,10 +292,11 @@ qla2x00_sysfs_write_optrom_ctl(struct kobject *kobj, valid = 0; if (ha->optrom_size == OPTROM_SIZE_2300 && start == 0) valid = 1; - else if (start == (FA_BOOT_CODE_ADDR*4) || - start == (FA_RISC_CODE_ADDR*4)) + else if (start == (ha->flt_region_boot * 4) || + start == (ha->flt_region_fw * 4)) valid = 1; - else if (IS_QLA25XX(ha) && start == (FA_VPD_NVRAM_ADDR*4)) + else if (IS_QLA25XX(ha) && + start == (ha->flt_region_vpd_nvram * 4)) valid = 1; if (!valid) { qla_printk(KERN_WARNING, ha, @@ -1005,7 +1006,6 @@ qla2x00_terminate_rport_io(struct fc_rport *rport) } qla2x00_abort_fcport_cmds(fcport); - scsi_target_unblock(&rport->dev); } static int @@ -1065,6 +1065,8 @@ qla2x00_get_fc_host_stats(struct Scsi_Host *shost) pfc_host_stat->dumped_frames = stats->dumped_frames; pfc_host_stat->nos_count = stats->nos_rcvd; } + pfc_host_stat->fcp_input_megabytes = ha->qla_stats.input_bytes >> 20; + pfc_host_stat->fcp_output_megabytes = ha->qla_stats.output_bytes >> 20; done_free: dma_pool_free(ha->s_dma_pool, stats, stats_dma); diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index 94a720eabfd..83c81921677 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -25,7 +25,6 @@ #include <linux/firmware.h> #include <linux/aer.h> #include <linux/mutex.h> -#include <linux/semaphore.h> #include <scsi/scsi.h> #include <scsi/scsi_host.h> @@ -2157,6 +2156,8 @@ struct qla_chip_state_84xx { struct qla_statistics { uint32_t total_isp_aborts; + uint64_t input_bytes; + uint64_t output_bytes; }; /* @@ -2238,6 +2239,7 @@ typedef struct scsi_qla_host { #define FCPORT_UPDATE_NEEDED 27 #define VP_DPC_NEEDED 28 /* wake up for VP dpc handling */ #define UNLOADING 29 +#define NPIV_CONFIG_NEEDED 30 uint32_t device_flags; #define DFLG_LOCAL_DEVICES BIT_0 @@ -2507,7 +2509,6 @@ typedef struct scsi_qla_host { uint64_t fce_wr, fce_rd; struct mutex fce_mutex; - uint32_t hw_event_start; uint32_t hw_event_ptr; uint32_t hw_event_pause_errors; @@ -2553,6 +2554,14 @@ typedef struct scsi_qla_host { uint32_t fdt_unprotect_sec_cmd; uint32_t fdt_protect_sec_cmd; + uint32_t flt_region_flt; + uint32_t flt_region_fdt; + uint32_t flt_region_boot; + uint32_t flt_region_fw; + uint32_t flt_region_vpd_nvram; + uint32_t flt_region_hw_event; + uint32_t flt_region_npiv_conf; + /* Needed for BEACON */ uint16_t beacon_blink_led; uint8_t beacon_color_state; diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h index cf194517400..d1d14202575 100644 --- a/drivers/scsi/qla2xxx/qla_fw.h +++ b/drivers/scsi/qla2xxx/qla_fw.h @@ -789,14 +789,23 @@ struct device_reg_24xx { #define FA_RISC_CODE_ADDR 0x20000 #define FA_RISC_CODE_SEGMENTS 2 +#define FA_FLASH_DESCR_ADDR_24 0x11000 +#define FA_FLASH_LAYOUT_ADDR_24 0x11400 +#define FA_NPIV_CONF0_ADDR_24 0x16000 +#define FA_NPIV_CONF1_ADDR_24 0x17000 + #define FA_FW_AREA_ADDR 0x40000 #define FA_VPD_NVRAM_ADDR 0x48000 #define FA_FEATURE_ADDR 0x4C000 #define FA_FLASH_DESCR_ADDR 0x50000 +#define FA_FLASH_LAYOUT_ADDR 0x50400 #define FA_HW_EVENT0_ADDR 0x54000 -#define FA_HW_EVENT1_ADDR 0x54200 +#define FA_HW_EVENT1_ADDR 0x54400 #define FA_HW_EVENT_SIZE 0x200 #define FA_HW_EVENT_ENTRY_SIZE 4 +#define FA_NPIV_CONF0_ADDR 0x5C000 +#define FA_NPIV_CONF1_ADDR 0x5D000 + /* * Flash Error Log Event Codes. */ @@ -806,10 +815,6 @@ struct device_reg_24xx { #define HW_EVENT_NVRAM_CHKSUM_ERR 0xF023 #define HW_EVENT_FLASH_FW_ERR 0xF024 -#define FA_BOOT_LOG_ADDR 0x58000 -#define FA_FW_DUMP0_ADDR 0x60000 -#define FA_FW_DUMP1_ADDR 0x70000 - uint32_t flash_data; /* Flash/NVRAM BIOS data. */ uint32_t ctrl_status; /* Control/Status. */ @@ -1203,6 +1208,62 @@ struct qla_fdt_layout { uint8_t unused2[65]; }; +/* Flash Layout Table ********************************************************/ + +struct qla_flt_location { + uint8_t sig[4]; + uint32_t start_lo; + uint32_t start_hi; + uint16_t unused; + uint16_t checksum; +}; + +struct qla_flt_header { + uint16_t version; + uint16_t length; + uint16_t checksum; + uint16_t unused; +}; + +#define FLT_REG_FW 0x01 +#define FLT_REG_BOOT_CODE 0x07 +#define FLT_REG_VPD_0 0x14 +#define FLT_REG_NVRAM_0 0x15 +#define FLT_REG_VPD_1 0x16 +#define FLT_REG_NVRAM_1 0x17 +#define FLT_REG_FDT 0x1a +#define FLT_REG_FLT 0x1c +#define FLT_REG_HW_EVENT_0 0x1d +#define FLT_REG_HW_EVENT_1 0x1f +#define FLT_REG_NPIV_CONF_0 0x29 +#define FLT_REG_NPIV_CONF_1 0x2a + +struct qla_flt_region { + uint32_t code; + uint32_t size; + uint32_t start; + uint32_t end; +}; + +/* Flash NPIV Configuration Table ********************************************/ + +struct qla_npiv_header { + uint8_t sig[2]; + uint16_t version; + uint16_t entries; + uint16_t unused[4]; + uint16_t checksum; +}; + +struct qla_npiv_entry { + uint16_t flags; + uint16_t vf_id; + uint16_t qos; + uint16_t unused1; + uint8_t port_name[WWN_SIZE]; + uint8_t node_name[WWN_SIZE]; +}; + /* 84XX Support **************************************************************/ #define MBA_ISP84XX_ALERT 0x800f /* Alert Notification. */ diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h index 0b156735e9a..753dbe6cce6 100644 --- a/drivers/scsi/qla2xxx/qla_gbl.h +++ b/drivers/scsi/qla2xxx/qla_gbl.h @@ -313,9 +313,11 @@ extern int qla24xx_get_flash_version(scsi_qla_host_t *, void *); extern int qla2xxx_hw_event_log(scsi_qla_host_t *, uint16_t , uint16_t, uint16_t, uint16_t); -extern void qla2xxx_get_flash_info(scsi_qla_host_t *); +extern int qla2xxx_get_flash_info(scsi_qla_host_t *); extern int qla2xxx_get_vpd_field(scsi_qla_host_t *, char *, char *, size_t); +extern void qla2xxx_flash_npiv_conf(scsi_qla_host_t *); + /* * Global Function Prototypes in qla_dbg.c source file. */ diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index ee89ddd64aa..a470f2d3270 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -83,6 +83,13 @@ qla2x00_initialize_adapter(scsi_qla_host_t *ha) ha->isp_ops->reset_chip(ha); + rval = qla2xxx_get_flash_info(ha); + if (rval) { + DEBUG2(printk("scsi(%ld): Unable to validate FLASH data.\n", + ha->host_no)); + return (rval); + } + ha->isp_ops->get_flash_version(ha, ha->request_ring); qla_printk(KERN_INFO, ha, "Configure NVRAM parameters...\n"); @@ -109,7 +116,6 @@ qla2x00_initialize_adapter(scsi_qla_host_t *ha) rval = qla2x00_setup_chip(ha); if (rval) return (rval); - qla2xxx_get_flash_info(ha); } if (IS_QLA84XX(ha)) { ha->cs84xx = qla84xx_get_chip(ha); @@ -2016,7 +2022,7 @@ qla2x00_configure_loop(scsi_qla_host_t *ha) DEBUG3(printk("%s: exiting normally\n", __func__)); } - /* Restore state if a resync event occured during processing */ + /* Restore state if a resync event occurred during processing */ if (test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags)) { if (test_bit(LOCAL_LOOP_UPDATE, &save_flags)) set_bit(LOCAL_LOOP_UPDATE, &ha->dpc_flags); @@ -2561,7 +2567,7 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *ha, struct list_head *new_fcports) rval = QLA_SUCCESS; /* Try GID_PT to get device list, else GAN. */ - swl = kcalloc(MAX_FIBRE_DEVICES, sizeof(sw_info_t), GFP_ATOMIC); + swl = kcalloc(MAX_FIBRE_DEVICES, sizeof(sw_info_t), GFP_KERNEL); if (!swl) { /*EMPTY*/ DEBUG2(printk("scsi(%ld): GID_PT allocations failed, fallback " @@ -3751,7 +3757,7 @@ qla24xx_load_risc_flash(scsi_qla_host_t *ha, uint32_t *srisc_addr) rval = QLA_SUCCESS; segments = FA_RISC_CODE_SEGMENTS; - faddr = FA_RISC_CODE_ADDR; + faddr = ha->flt_region_fw; dcode = (uint32_t *)ha->request_ring; *srisc_addr = 0; diff --git a/drivers/scsi/qla2xxx/qla_inline.h b/drivers/scsi/qla2xxx/qla_inline.h index 92fafbdbbaa..e90afad120e 100644 --- a/drivers/scsi/qla2xxx/qla_inline.h +++ b/drivers/scsi/qla2xxx/qla_inline.h @@ -52,7 +52,7 @@ to_qla_parent(scsi_qla_host_t *ha) * @ha: HA context * @ha_locked: is function called with the hardware lock * - * Returns non-zero if a failure occured, else zero. + * Returns non-zero if a failure occurred, else zero. */ static inline int qla2x00_issue_marker(scsi_qla_host_t *ha, int ha_locked) diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c index d57669aa461..85bc0a48598 100644 --- a/drivers/scsi/qla2xxx/qla_iocb.c +++ b/drivers/scsi/qla2xxx/qla_iocb.c @@ -21,17 +21,22 @@ static void qla2x00_isp_cmd(scsi_qla_host_t *ha); * Returns the proper CF_* direction based on CDB. */ static inline uint16_t -qla2x00_get_cmd_direction(struct scsi_cmnd *cmd) +qla2x00_get_cmd_direction(srb_t *sp) { uint16_t cflags; cflags = 0; /* Set transfer direction */ - if (cmd->sc_data_direction == DMA_TO_DEVICE) + if (sp->cmd->sc_data_direction == DMA_TO_DEVICE) { cflags = CF_WRITE; - else if (cmd->sc_data_direction == DMA_FROM_DEVICE) + sp->fcport->ha->qla_stats.output_bytes += + scsi_bufflen(sp->cmd); + } else if (sp->cmd->sc_data_direction == DMA_FROM_DEVICE) { cflags = CF_READ; + sp->fcport->ha->qla_stats.input_bytes += + scsi_bufflen(sp->cmd); + } return (cflags); } @@ -169,7 +174,7 @@ void qla2x00_build_scsi_iocbs_32(srb_t *sp, cmd_entry_t *cmd_pkt, ha = sp->ha; - cmd_pkt->control_flags |= cpu_to_le16(qla2x00_get_cmd_direction(cmd)); + cmd_pkt->control_flags |= cpu_to_le16(qla2x00_get_cmd_direction(sp)); /* Three DSDs are available in the Command Type 2 IOCB */ avail_dsds = 3; @@ -228,7 +233,7 @@ void qla2x00_build_scsi_iocbs_64(srb_t *sp, cmd_entry_t *cmd_pkt, ha = sp->ha; - cmd_pkt->control_flags |= cpu_to_le16(qla2x00_get_cmd_direction(cmd)); + cmd_pkt->control_flags |= cpu_to_le16(qla2x00_get_cmd_direction(sp)); /* Two DSDs are available in the Command Type 3 IOCB */ avail_dsds = 2; @@ -262,7 +267,7 @@ void qla2x00_build_scsi_iocbs_64(srb_t *sp, cmd_entry_t *cmd_pkt, * qla2x00_start_scsi() - Send a SCSI command to the ISP * @sp: command to send to the ISP * - * Returns non-zero if a failure occured, else zero. + * Returns non-zero if a failure occurred, else zero. */ int qla2x00_start_scsi(srb_t *sp) @@ -407,7 +412,7 @@ queuing_error: * * Can be called from both normal and interrupt context. * - * Returns non-zero if a failure occured, else zero. + * Returns non-zero if a failure occurred, else zero. */ int __qla2x00_marker(scsi_qla_host_t *ha, uint16_t loop_id, uint16_t lun, @@ -625,12 +630,17 @@ qla24xx_build_scsi_iocbs(srb_t *sp, struct cmd_type_7 *cmd_pkt, ha = sp->ha; /* Set transfer direction */ - if (cmd->sc_data_direction == DMA_TO_DEVICE) + if (cmd->sc_data_direction == DMA_TO_DEVICE) { cmd_pkt->task_mgmt_flags = __constant_cpu_to_le16(TMF_WRITE_DATA); - else if (cmd->sc_data_direction == DMA_FROM_DEVICE) + sp->fcport->ha->qla_stats.output_bytes += + scsi_bufflen(sp->cmd); + } else if (cmd->sc_data_direction == DMA_FROM_DEVICE) { cmd_pkt->task_mgmt_flags = __constant_cpu_to_le16(TMF_READ_DATA); + sp->fcport->ha->qla_stats.input_bytes += + scsi_bufflen(sp->cmd); + } /* One DSD is available in the Command Type 3 IOCB */ avail_dsds = 1; @@ -666,7 +676,7 @@ qla24xx_build_scsi_iocbs(srb_t *sp, struct cmd_type_7 *cmd_pkt, * qla24xx_start_scsi() - Send a SCSI command to the ISP * @sp: command to send to the ISP * - * Returns non-zero if a failure occured, else zero. + * Returns non-zero if a failure occurred, else zero. */ int qla24xx_start_scsi(srb_t *sp) diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 45a3b93eed5..a76efd99d00 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -391,9 +391,9 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint16_t *mb) break; case MBA_LIP_OCCURRED: /* Loop Initialization Procedure */ - DEBUG2(printk("scsi(%ld): LIP occured (%x).\n", ha->host_no, + DEBUG2(printk("scsi(%ld): LIP occurred (%x).\n", ha->host_no, mb[1])); - qla_printk(KERN_INFO, ha, "LIP occured (%x).\n", mb[1]); + qla_printk(KERN_INFO, ha, "LIP occurred (%x).\n", mb[1]); if (atomic_read(&ha->loop_state) != LOOP_DOWN) { atomic_set(&ha->loop_state, LOOP_DOWN); @@ -460,7 +460,7 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint16_t *mb) DEBUG2(printk("scsi(%ld): Asynchronous LIP RESET (%x).\n", ha->host_no, mb[1])); qla_printk(KERN_INFO, ha, - "LIP reset occured (%x).\n", mb[1]); + "LIP reset occurred (%x).\n", mb[1]); if (atomic_read(&ha->loop_state) != LOOP_DOWN) { atomic_set(&ha->loop_state, LOOP_DOWN); @@ -543,7 +543,7 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint16_t *mb) case MBA_PORT_UPDATE: /* Port database update */ /* - * If PORT UPDATE is global (recieved LIP_OCCURED/LIP_RESET + * If PORT UPDATE is global (received LIP_OCCURRED/LIP_RESET * event etc. earlier indicating loop is down) then process * it. Otherwise ignore it and Wait for RSCN to come in. */ @@ -589,7 +589,7 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint16_t *mb) "scsi(%ld): RSCN database changed -- %04x %04x %04x.\n", ha->host_no, mb[1], mb[2], mb[3])); - rscn_entry = (mb[1] << 16) | mb[2]; + rscn_entry = ((mb[1] & 0xff) << 16) | mb[2]; host_pid = (ha->d_id.b.domain << 16) | (ha->d_id.b.area << 8) | ha->d_id.b.al_pa; if (rscn_entry == host_pid) { @@ -600,6 +600,8 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint16_t *mb) break; } + /* Ignore reserved bits from RSCN-payload. */ + rscn_entry = ((mb[1] & 0x3ff) << 16) | mb[2]; rscn_queue_index = ha->rscn_in_ptr + 1; if (rscn_queue_index == MAX_RSCN_COUNT) rscn_queue_index = 0; @@ -1060,8 +1062,9 @@ qla2x00_status_entry(scsi_qla_host_t *ha, void *pkt) resid = resid_len; /* Use F/W calculated residual length. */ if (IS_FWI2_CAPABLE(ha)) { - if (scsi_status & SS_RESIDUAL_UNDER && - resid != fw_resid_len) { + if (!(scsi_status & SS_RESIDUAL_UNDER)) { + lscsi_status = 0; + } else if (resid != fw_resid_len) { scsi_status &= ~SS_RESIDUAL_UNDER; lscsi_status = 0; } @@ -1184,7 +1187,12 @@ qla2x00_status_entry(scsi_qla_host_t *ha, void *pkt) cp->serial_number, comp_status, atomic_read(&fcport->state))); - cp->result = DID_BUS_BUSY << 16; + /* + * We are going to have the fc class block the rport + * while we try to recover so instruct the mid layer + * to requeue until the class decides how to handle this. + */ + cp->result = DID_TRANSPORT_DISRUPTED << 16; if (atomic_read(&fcport->state) == FCS_ONLINE) qla2x00_mark_device_lost(fcport->ha, fcport, 1, 1); break; @@ -1211,7 +1219,12 @@ qla2x00_status_entry(scsi_qla_host_t *ha, void *pkt) break; case CS_TIMEOUT: - cp->result = DID_BUS_BUSY << 16; + /* + * We are going to have the fc class block the rport + * while we try to recover so instruct the mid layer + * to requeue until the class decides how to handle this. + */ + cp->result = DID_TRANSPORT_DISRUPTED << 16; if (IS_FWI2_CAPABLE(ha)) { DEBUG2(printk(KERN_INFO @@ -1834,7 +1847,6 @@ clear_risc_ints: WRT_REG_WORD(®->isp.hccr, HCCR_CLR_HOST_INT); } spin_unlock_irq(&ha->hardware_lock); - ha->isp_ops->enable_intrs(ha); fail: return ret; diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index 813bc7784c0..36bc6851e23 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -233,7 +233,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *pvha, mbx_cmd_t *mcp) DEBUG2_3_11(printk("%s(%ld): timeout schedule " "isp_abort_needed.\n", __func__, ha->host_no)); qla_printk(KERN_WARNING, ha, - "Mailbox command timeout occured. Scheduling ISP " + "Mailbox command timeout occurred. Scheduling ISP " "abort.\n"); set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags); qla2xxx_wake_dpc(ha); @@ -244,7 +244,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *pvha, mbx_cmd_t *mcp) DEBUG2_3_11(printk("%s(%ld): timeout calling " "abort_isp\n", __func__, ha->host_no)); qla_printk(KERN_WARNING, ha, - "Mailbox command timeout occured. Issuing ISP " + "Mailbox command timeout occurred. Issuing ISP " "abort.\n"); set_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags); @@ -1995,7 +1995,7 @@ qla2x00_get_fcal_position_map(scsi_qla_host_t *ha, char *pos_map) char *pmap; dma_addr_t pmap_dma; - pmap = dma_pool_alloc(ha->s_dma_pool, GFP_ATOMIC, &pmap_dma); + pmap = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &pmap_dma); if (pmap == NULL) { DEBUG2_3_11(printk("%s(%ld): **** Mem Alloc Failed ****", __func__, ha->host_no)); diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 26afe44265c..2aed4721c0d 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -394,10 +394,8 @@ qla2x00_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) } /* Close window on fcport/rport state-transitioning. */ - if (fcport->drport) { - cmd->result = DID_IMM_RETRY << 16; - goto qc_fail_command; - } + if (fcport->drport) + goto qc_target_busy; if (atomic_read(&fcport->state) != FCS_ONLINE) { if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD || @@ -405,7 +403,7 @@ qla2x00_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) cmd->result = DID_NO_CONNECT << 16; goto qc_fail_command; } - goto qc_host_busy; + goto qc_target_busy; } spin_unlock_irq(ha->host->host_lock); @@ -428,10 +426,11 @@ qc_host_busy_free_sp: qc_host_busy_lock: spin_lock_irq(ha->host->host_lock); - -qc_host_busy: return SCSI_MLQUEUE_HOST_BUSY; +qc_target_busy: + return SCSI_MLQUEUE_TARGET_BUSY; + qc_fail_command: done(cmd); @@ -461,10 +460,8 @@ qla24xx_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) } /* Close window on fcport/rport state-transitioning. */ - if (fcport->drport) { - cmd->result = DID_IMM_RETRY << 16; - goto qc24_fail_command; - } + if (fcport->drport) + goto qc24_target_busy; if (atomic_read(&fcport->state) != FCS_ONLINE) { if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD || @@ -472,7 +469,7 @@ qla24xx_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) cmd->result = DID_NO_CONNECT << 16; goto qc24_fail_command; } - goto qc24_host_busy; + goto qc24_target_busy; } spin_unlock_irq(ha->host->host_lock); @@ -495,10 +492,11 @@ qc24_host_busy_free_sp: qc24_host_busy_lock: spin_lock_irq(ha->host->host_lock); - -qc24_host_busy: return SCSI_MLQUEUE_HOST_BUSY; +qc24_target_busy: + return SCSI_MLQUEUE_TARGET_BUSY; + qc24_fail_command: done(cmd); @@ -1517,6 +1515,7 @@ qla2xxx_scan_start(struct Scsi_Host *shost) set_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags); set_bit(LOCAL_LOOP_UPDATE, &ha->dpc_flags); set_bit(RSCN_UPDATE, &ha->dpc_flags); + set_bit(NPIV_CONFIG_NEEDED, &ha->dpc_flags); } static int @@ -1663,8 +1662,6 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) ha->gid_list_info_size = 8; ha->optrom_size = OPTROM_SIZE_25XX; ha->isp_ops = &qla25xx_isp_ops; - ha->hw_event_start = PCI_FUNC(pdev->devfn) ? - FA_HW_EVENT1_ADDR: FA_HW_EVENT0_ADDR; } host->can_queue = ha->request_q_length + 128; @@ -1740,6 +1737,8 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) if (ret) goto probe_failed; + ha->isp_ops->enable_intrs(ha); + scsi_scan_host(host); qla2x00_alloc_sysfs_attr(ha); @@ -2431,6 +2430,12 @@ qla2x00_do_dpc(void *data) ha->host_no)); } + if (test_bit(NPIV_CONFIG_NEEDED, &ha->dpc_flags) && + atomic_read(&ha->loop_state) == LOOP_READY) { + clear_bit(NPIV_CONFIG_NEEDED, &ha->dpc_flags); + qla2xxx_flash_npiv_conf(ha); + } + if (!ha->interrupts_on) ha->isp_ops->enable_intrs(ha); diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c index 1bca7447493..90a13211717 100644 --- a/drivers/scsi/qla2xxx/qla_sup.c +++ b/drivers/scsi/qla2xxx/qla_sup.c @@ -543,23 +543,198 @@ qla24xx_get_flash_manufacturer(scsi_qla_host_t *ha, uint8_t *man_id, } } -void -qla2xxx_get_flash_info(scsi_qla_host_t *ha) +static int +qla2xxx_find_flt_start(scsi_qla_host_t *ha, uint32_t *start) +{ + const char *loc, *locations[] = { "DEF", "PCI" }; + uint32_t pcihdr, pcids; + uint32_t *dcode; + uint8_t *buf, *bcode, last_image; + uint16_t cnt, chksum, *wptr; + struct qla_flt_location *fltl; + + /* + * FLT-location structure resides after the last PCI region. + */ + + /* Begin with sane defaults. */ + loc = locations[0]; + *start = IS_QLA24XX_TYPE(ha) ? FA_FLASH_LAYOUT_ADDR_24: + FA_FLASH_LAYOUT_ADDR; + + /* Begin with first PCI expansion ROM header. */ + buf = (uint8_t *)ha->request_ring; + dcode = (uint32_t *)ha->request_ring; + pcihdr = 0; + last_image = 1; + do { + /* Verify PCI expansion ROM header. */ + qla24xx_read_flash_data(ha, dcode, pcihdr >> 2, 0x20); + bcode = buf + (pcihdr % 4); + if (bcode[0x0] != 0x55 || bcode[0x1] != 0xaa) + goto end; + + /* Locate PCI data structure. */ + pcids = pcihdr + ((bcode[0x19] << 8) | bcode[0x18]); + qla24xx_read_flash_data(ha, dcode, pcids >> 2, 0x20); + bcode = buf + (pcihdr % 4); + + /* Validate signature of PCI data structure. */ + if (bcode[0x0] != 'P' || bcode[0x1] != 'C' || + bcode[0x2] != 'I' || bcode[0x3] != 'R') + goto end; + + last_image = bcode[0x15] & BIT_7; + + /* Locate next PCI expansion ROM. */ + pcihdr += ((bcode[0x11] << 8) | bcode[0x10]) * 512; + } while (!last_image); + + /* Now verify FLT-location structure. */ + fltl = (struct qla_flt_location *)ha->request_ring; + qla24xx_read_flash_data(ha, dcode, pcihdr >> 2, + sizeof(struct qla_flt_location) >> 2); + if (fltl->sig[0] != 'Q' || fltl->sig[1] != 'F' || + fltl->sig[2] != 'L' || fltl->sig[3] != 'T') + goto end; + + wptr = (uint16_t *)ha->request_ring; + cnt = sizeof(struct qla_flt_location) >> 1; + for (chksum = 0; cnt; cnt--) + chksum += le16_to_cpu(*wptr++); + if (chksum) { + qla_printk(KERN_ERR, ha, + "Inconsistent FLTL detected: checksum=0x%x.\n", chksum); + qla2x00_dump_buffer(buf, sizeof(struct qla_flt_location)); + return QLA_FUNCTION_FAILED; + } + + /* Good data. Use specified location. */ + loc = locations[1]; + *start = le16_to_cpu(fltl->start_hi) << 16 | + le16_to_cpu(fltl->start_lo); +end: + DEBUG2(qla_printk(KERN_DEBUG, ha, "FLTL[%s] = 0x%x.\n", loc, *start)); + return QLA_SUCCESS; +} + +static void +qla2xxx_get_flt_info(scsi_qla_host_t *ha, uint32_t flt_addr) +{ + const char *loc, *locations[] = { "DEF", "FLT" }; + uint16_t *wptr; + uint16_t cnt, chksum; + uint32_t start; + struct qla_flt_header *flt; + struct qla_flt_region *region; + + ha->flt_region_flt = flt_addr; + wptr = (uint16_t *)ha->request_ring; + flt = (struct qla_flt_header *)ha->request_ring; + region = (struct qla_flt_region *)&flt[1]; + ha->isp_ops->read_optrom(ha, (uint8_t *)ha->request_ring, + flt_addr << 2, OPTROM_BURST_SIZE); + if (*wptr == __constant_cpu_to_le16(0xffff)) + goto no_flash_data; + if (flt->version != __constant_cpu_to_le16(1)) { + DEBUG2(qla_printk(KERN_INFO, ha, "Unsupported FLT detected: " + "version=0x%x length=0x%x checksum=0x%x.\n", + le16_to_cpu(flt->version), le16_to_cpu(flt->length), + le16_to_cpu(flt->checksum))); + goto no_flash_data; + } + + cnt = (sizeof(struct qla_flt_header) + le16_to_cpu(flt->length)) >> 1; + for (chksum = 0; cnt; cnt--) + chksum += le16_to_cpu(*wptr++); + if (chksum) { + DEBUG2(qla_printk(KERN_INFO, ha, "Inconsistent FLT detected: " + "version=0x%x length=0x%x checksum=0x%x.\n", + le16_to_cpu(flt->version), le16_to_cpu(flt->length), + chksum)); + goto no_flash_data; + } + + loc = locations[1]; + cnt = le16_to_cpu(flt->length) / sizeof(struct qla_flt_region); + for ( ; cnt; cnt--, region++) { + /* Store addresses as DWORD offsets. */ + start = le32_to_cpu(region->start) >> 2; + + DEBUG3(qla_printk(KERN_DEBUG, ha, "FLT[%02x]: start=0x%x " + "end=0x%x size=0x%x.\n", le32_to_cpu(region->code), start, + le32_to_cpu(region->end) >> 2, le32_to_cpu(region->size))); + + switch (le32_to_cpu(region->code)) { + case FLT_REG_FW: + ha->flt_region_fw = start; + break; + case FLT_REG_BOOT_CODE: + ha->flt_region_boot = start; + break; + case FLT_REG_VPD_0: + ha->flt_region_vpd_nvram = start; + break; + case FLT_REG_FDT: + ha->flt_region_fdt = start; + break; + case FLT_REG_HW_EVENT_0: + if (!PCI_FUNC(ha->pdev->devfn)) + ha->flt_region_hw_event = start; + break; + case FLT_REG_HW_EVENT_1: + if (PCI_FUNC(ha->pdev->devfn)) + ha->flt_region_hw_event = start; + break; + case FLT_REG_NPIV_CONF_0: + if (!PCI_FUNC(ha->pdev->devfn)) + ha->flt_region_npiv_conf = start; + break; + case FLT_REG_NPIV_CONF_1: + if (PCI_FUNC(ha->pdev->devfn)) + ha->flt_region_npiv_conf = start; + break; + } + } + goto done; + +no_flash_data: + /* Use hardcoded defaults. */ + loc = locations[0]; + ha->flt_region_fw = FA_RISC_CODE_ADDR; + ha->flt_region_boot = FA_BOOT_CODE_ADDR; + ha->flt_region_vpd_nvram = FA_VPD_NVRAM_ADDR; + ha->flt_region_fdt = IS_QLA24XX_TYPE(ha) ? FA_FLASH_DESCR_ADDR_24: + FA_FLASH_DESCR_ADDR; + ha->flt_region_hw_event = !PCI_FUNC(ha->pdev->devfn) ? + FA_HW_EVENT0_ADDR: FA_HW_EVENT1_ADDR; + ha->flt_region_npiv_conf = !PCI_FUNC(ha->pdev->devfn) ? + (IS_QLA24XX_TYPE(ha) ? FA_NPIV_CONF0_ADDR_24: FA_NPIV_CONF0_ADDR): + (IS_QLA24XX_TYPE(ha) ? FA_NPIV_CONF1_ADDR_24: FA_NPIV_CONF1_ADDR); +done: + DEBUG2(qla_printk(KERN_DEBUG, ha, "FLT[%s]: boot=0x%x fw=0x%x " + "vpd_nvram=0x%x fdt=0x%x flt=0x%x hwe=0x%x npiv=0x%x.\n", loc, + ha->flt_region_boot, ha->flt_region_fw, ha->flt_region_vpd_nvram, + ha->flt_region_fdt, ha->flt_region_flt, ha->flt_region_hw_event, + ha->flt_region_npiv_conf)); +} + +static void +qla2xxx_get_fdt_info(scsi_qla_host_t *ha) { #define FLASH_BLK_SIZE_32K 0x8000 #define FLASH_BLK_SIZE_64K 0x10000 + const char *loc, *locations[] = { "MID", "FDT" }; uint16_t cnt, chksum; uint16_t *wptr; struct qla_fdt_layout *fdt; uint8_t man_id, flash_id; - - if (!IS_QLA24XX_TYPE(ha) && !IS_QLA25XX(ha)) - return; + uint16_t mid, fid; wptr = (uint16_t *)ha->request_ring; fdt = (struct qla_fdt_layout *)ha->request_ring; ha->isp_ops->read_optrom(ha, (uint8_t *)ha->request_ring, - FA_FLASH_DESCR_ADDR << 2, OPTROM_BURST_SIZE); + ha->flt_region_fdt << 2, OPTROM_BURST_SIZE); if (*wptr == __constant_cpu_to_le16(0xffff)) goto no_flash_data; if (fdt->sig[0] != 'Q' || fdt->sig[1] != 'L' || fdt->sig[2] != 'I' || @@ -577,7 +752,10 @@ qla2xxx_get_flash_info(scsi_qla_host_t *ha) goto no_flash_data; } - ha->fdt_odd_index = le16_to_cpu(fdt->man_id) == 0x1f; + loc = locations[1]; + mid = le16_to_cpu(fdt->man_id); + fid = le16_to_cpu(fdt->id); + ha->fdt_odd_index = mid == 0x1f; ha->fdt_wrt_disable = fdt->wrt_disable_bits; ha->fdt_erase_cmd = flash_conf_to_access_addr(0x0300 | fdt->erase_cmd); ha->fdt_block_size = le32_to_cpu(fdt->block_size); @@ -588,16 +766,12 @@ qla2xxx_get_flash_info(scsi_qla_host_t *ha) flash_conf_to_access_addr(0x0300 | fdt->protect_sec_cmd): flash_conf_to_access_addr(0x0336); } - - DEBUG2(qla_printk(KERN_DEBUG, ha, "Flash[FDT]: (0x%x/0x%x) erase=0x%x " - "pro=%x upro=%x idx=%d wrtd=0x%x blk=0x%x.\n", - le16_to_cpu(fdt->man_id), le16_to_cpu(fdt->id), ha->fdt_erase_cmd, - ha->fdt_protect_sec_cmd, ha->fdt_unprotect_sec_cmd, - ha->fdt_odd_index, ha->fdt_wrt_disable, ha->fdt_block_size)); - return; - + goto done; no_flash_data: + loc = locations[0]; qla24xx_get_flash_manufacturer(ha, &man_id, &flash_id); + mid = man_id; + fid = flash_id; ha->fdt_wrt_disable = 0x9c; ha->fdt_erase_cmd = flash_conf_to_access_addr(0x03d8); switch (man_id) { @@ -625,14 +799,117 @@ no_flash_data: ha->fdt_block_size = FLASH_BLK_SIZE_64K; break; } - - DEBUG2(qla_printk(KERN_DEBUG, ha, "Flash[MID]: (0x%x/0x%x) erase=0x%x " - "pro=%x upro=%x idx=%d wrtd=0x%x blk=0x%x.\n", man_id, flash_id, +done: + DEBUG2(qla_printk(KERN_DEBUG, ha, "FDT[%s]: (0x%x/0x%x) erase=0x%x " + "pro=%x upro=%x idx=%d wrtd=0x%x blk=0x%x.\n", loc, mid, fid, ha->fdt_erase_cmd, ha->fdt_protect_sec_cmd, ha->fdt_unprotect_sec_cmd, ha->fdt_odd_index, ha->fdt_wrt_disable, ha->fdt_block_size)); } +int +qla2xxx_get_flash_info(scsi_qla_host_t *ha) +{ + int ret; + uint32_t flt_addr; + + if (!IS_QLA24XX_TYPE(ha) && !IS_QLA25XX(ha)) + return QLA_SUCCESS; + + ret = qla2xxx_find_flt_start(ha, &flt_addr); + if (ret != QLA_SUCCESS) + return ret; + + qla2xxx_get_flt_info(ha, flt_addr); + qla2xxx_get_fdt_info(ha); + + return QLA_SUCCESS; +} + +void +qla2xxx_flash_npiv_conf(scsi_qla_host_t *ha) +{ +#define NPIV_CONFIG_SIZE (16*1024) + void *data; + uint16_t *wptr; + uint16_t cnt, chksum; + struct qla_npiv_header hdr; + struct qla_npiv_entry *entry; + + if (!IS_QLA24XX_TYPE(ha) && !IS_QLA25XX(ha)) + return; + + ha->isp_ops->read_optrom(ha, (uint8_t *)&hdr, + ha->flt_region_npiv_conf << 2, sizeof(struct qla_npiv_header)); + if (hdr.version == __constant_cpu_to_le16(0xffff)) + return; + if (hdr.version != __constant_cpu_to_le16(1)) { + DEBUG2(qla_printk(KERN_INFO, ha, "Unsupported NPIV-Config " + "detected: version=0x%x entries=0x%x checksum=0x%x.\n", + le16_to_cpu(hdr.version), le16_to_cpu(hdr.entries), + le16_to_cpu(hdr.checksum))); + return; + } + + data = kmalloc(NPIV_CONFIG_SIZE, GFP_KERNEL); + if (!data) { + DEBUG2(qla_printk(KERN_INFO, ha, "NPIV-Config: Unable to " + "allocate memory.\n")); + return; + } + + ha->isp_ops->read_optrom(ha, (uint8_t *)data, + ha->flt_region_npiv_conf << 2, NPIV_CONFIG_SIZE); + + cnt = (sizeof(struct qla_npiv_header) + le16_to_cpu(hdr.entries) * + sizeof(struct qla_npiv_entry)) >> 1; + for (wptr = data, chksum = 0; cnt; cnt--) + chksum += le16_to_cpu(*wptr++); + if (chksum) { + DEBUG2(qla_printk(KERN_INFO, ha, "Inconsistent NPIV-Config " + "detected: version=0x%x entries=0x%x checksum=0x%x.\n", + le16_to_cpu(hdr.version), le16_to_cpu(hdr.entries), + chksum)); + goto done; + } + + entry = data + sizeof(struct qla_npiv_header); + cnt = le16_to_cpu(hdr.entries); + for ( ; cnt; cnt--, entry++) { + uint16_t flags; + struct fc_vport_identifiers vid; + struct fc_vport *vport; + + flags = le16_to_cpu(entry->flags); + if (flags == 0xffff) + continue; + if ((flags & BIT_0) == 0) + continue; + + memset(&vid, 0, sizeof(vid)); + vid.roles = FC_PORT_ROLE_FCP_INITIATOR; + vid.vport_type = FC_PORTTYPE_NPIV; + vid.disable = false; + vid.port_name = wwn_to_u64(entry->port_name); + vid.node_name = wwn_to_u64(entry->node_name); + + DEBUG2(qla_printk(KERN_DEBUG, ha, "NPIV[%02x]: wwpn=%llx " + "wwnn=%llx vf_id=0x%x qos=0x%x.\n", cnt, + (unsigned long long)vid.port_name, + (unsigned long long)vid.node_name, + le16_to_cpu(entry->vf_id), le16_to_cpu(entry->qos))); + + vport = fc_vport_create(ha->host, 0, &vid); + if (!vport) + qla_printk(KERN_INFO, ha, "NPIV-Config: Failed to " + "create vport [%02x]: wwpn=%llx wwnn=%llx.\n", cnt, + (unsigned long long)vid.port_name, + (unsigned long long)vid.node_name); + } +done: + kfree(data); +} + static void qla24xx_unprotect_flash(scsi_qla_host_t *ha) { @@ -920,7 +1197,8 @@ qla25xx_read_nvram_data(scsi_qla_host_t *ha, uint8_t *buf, uint32_t naddr, dwptr = (uint32_t *)buf; for (i = 0; i < bytes >> 2; i++, naddr++) dwptr[i] = cpu_to_le32(qla24xx_read_flash_dword(ha, - flash_data_to_access_addr(FA_VPD_NVRAM_ADDR | naddr))); + flash_data_to_access_addr(ha->flt_region_vpd_nvram | + naddr))); return buf; } @@ -935,10 +1213,10 @@ qla25xx_write_nvram_data(scsi_qla_host_t *ha, uint8_t *buf, uint32_t naddr, dbuf = vmalloc(RMW_BUFFER_SIZE); if (!dbuf) return QLA_MEMORY_ALLOC_FAILED; - ha->isp_ops->read_optrom(ha, dbuf, FA_VPD_NVRAM_ADDR << 2, + ha->isp_ops->read_optrom(ha, dbuf, ha->flt_region_vpd_nvram << 2, RMW_BUFFER_SIZE); memcpy(dbuf + (naddr << 2), buf, bytes); - ha->isp_ops->write_optrom(ha, dbuf, FA_VPD_NVRAM_ADDR << 2, + ha->isp_ops->write_optrom(ha, dbuf, ha->flt_region_vpd_nvram << 2, RMW_BUFFER_SIZE); vfree(dbuf); @@ -2166,7 +2444,7 @@ qla2x00_get_flash_version(scsi_qla_host_t *ha, void *mbuf) memset(dbyte, 0, 8); dcode = (uint16_t *)dbyte; - qla2x00_read_flash_data(ha, dbyte, FA_RISC_CODE_ADDR * 4 + 10, + qla2x00_read_flash_data(ha, dbyte, ha->flt_region_fw * 4 + 10, 8); DEBUG3(printk("%s(%ld): dumping fw ver from flash:\n", __func__, ha->host_no)); @@ -2177,7 +2455,7 @@ qla2x00_get_flash_version(scsi_qla_host_t *ha, void *mbuf) (dcode[0] == 0 && dcode[1] == 0 && dcode[2] == 0 && dcode[3] == 0)) { DEBUG2(printk("%s(): Unrecognized fw revision at " - "%x.\n", __func__, FA_RISC_CODE_ADDR * 4)); + "%x.\n", __func__, ha->flt_region_fw * 4)); } else { /* values are in big endian */ ha->fw_revision[0] = dbyte[0] << 16 | dbyte[1]; @@ -2212,7 +2490,7 @@ qla24xx_get_flash_version(scsi_qla_host_t *ha, void *mbuf) dcode = mbuf; /* Begin with first PCI expansion ROM header. */ - pcihdr = 0; + pcihdr = ha->flt_region_boot; last_image = 1; do { /* Verify PCI expansion ROM header. */ @@ -2282,7 +2560,7 @@ qla24xx_get_flash_version(scsi_qla_host_t *ha, void *mbuf) memset(ha->fw_revision, 0, sizeof(ha->fw_revision)); dcode = mbuf; - qla24xx_read_flash_data(ha, dcode, FA_RISC_CODE_ADDR + 4, 4); + qla24xx_read_flash_data(ha, dcode, ha->flt_region_fw + 4, 4); for (i = 0; i < 4; i++) dcode[i] = be32_to_cpu(dcode[i]); @@ -2291,7 +2569,7 @@ qla24xx_get_flash_version(scsi_qla_host_t *ha, void *mbuf) (dcode[0] == 0 && dcode[1] == 0 && dcode[2] == 0 && dcode[3] == 0)) { DEBUG2(printk("%s(): Unrecognized fw version at %x.\n", - __func__, FA_RISC_CODE_ADDR)); + __func__, ha->flt_region_fw)); } else { ha->fw_revision[0] = dcode[0]; ha->fw_revision[1] = dcode[1]; @@ -2355,7 +2633,7 @@ qla2xxx_hw_event_store(scsi_qla_host_t *ha, uint32_t *fdata) /* Locate first empty entry. */ for (;;) { if (ha->hw_event_ptr >= - ha->hw_event_start + FA_HW_EVENT_SIZE) { + ha->flt_region_hw_event + FA_HW_EVENT_SIZE) { DEBUG2(qla_printk(KERN_WARNING, ha, "HW event -- Log Full!\n")); return QLA_MEMORY_ALLOC_FAILED; @@ -2391,7 +2669,7 @@ qla2xxx_hw_event_log(scsi_qla_host_t *ha, uint16_t code, uint16_t d1, int rval; uint32_t marker[2], fdata[4]; - if (ha->hw_event_start == 0) + if (ha->flt_region_hw_event == 0) return QLA_FUNCTION_FAILED; DEBUG2(qla_printk(KERN_WARNING, ha, @@ -2406,7 +2684,7 @@ qla2xxx_hw_event_log(scsi_qla_host_t *ha, uint16_t code, uint16_t d1, QLA_DRIVER_PATCH_VER, QLA_DRIVER_BETA_VER); /* Locate marker. */ - ha->hw_event_ptr = ha->hw_event_start; + ha->hw_event_ptr = ha->flt_region_hw_event; for (;;) { qla24xx_read_flash_data(ha, fdata, ha->hw_event_ptr, 4); @@ -2415,7 +2693,7 @@ qla2xxx_hw_event_log(scsi_qla_host_t *ha, uint16_t code, uint16_t d1, break; ha->hw_event_ptr += FA_HW_EVENT_ENTRY_SIZE; if (ha->hw_event_ptr >= - ha->hw_event_start + FA_HW_EVENT_SIZE) { + ha->flt_region_hw_event + FA_HW_EVENT_SIZE) { DEBUG2(qla_printk(KERN_WARNING, ha, "HW event -- Log Full!\n")); return QLA_MEMORY_ALLOC_FAILED; diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h index 4160e4caa7b..be5e299df52 100644 --- a/drivers/scsi/qla2xxx/qla_version.h +++ b/drivers/scsi/qla2xxx/qla_version.h @@ -7,7 +7,7 @@ /* * Driver version */ -#define QLA2XXX_VERSION "8.02.01-k7" +#define QLA2XXX_VERSION "8.02.01-k8" #define QLA_DRIVER_MAJOR_VER 8 #define QLA_DRIVER_MINOR_VER 2 diff --git a/drivers/scsi/qla4xxx/ql4_isr.c b/drivers/scsi/qla4xxx/ql4_isr.c index a91a57c57bf..799120fcb9b 100644 --- a/drivers/scsi/qla4xxx/ql4_isr.c +++ b/drivers/scsi/qla4xxx/ql4_isr.c @@ -139,7 +139,7 @@ static void qla4xxx_status_entry(struct scsi_qla_host *ha, ha->host_no, cmd->device->channel, cmd->device->id, cmd->device->lun)); - cmd->result = DID_BUS_BUSY << 16; + cmd->result = DID_TRANSPORT_DISRUPTED << 16; /* * Mark device missing so that we won't continue to send @@ -243,7 +243,7 @@ static void qla4xxx_status_entry(struct scsi_qla_host *ha, if (atomic_read(&ddb_entry->state) == DDB_STATE_ONLINE) qla4xxx_mark_device_missing(ha, ddb_entry); - cmd->result = DID_BUS_BUSY << 16; + cmd->result = DID_TRANSPORT_DISRUPTED << 16; break; case SCS_QUEUE_FULL: diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c index 88bebb13bc5..db7ea3bb4e8 100644 --- a/drivers/scsi/qla4xxx/ql4_os.c +++ b/drivers/scsi/qla4xxx/ql4_os.c @@ -353,7 +353,7 @@ void qla4xxx_mark_device_missing(struct scsi_qla_host *ha, ha->host_no, ddb_entry->bus, ddb_entry->target, ddb_entry->fw_ddb_index)); iscsi_block_session(ddb_entry->sess); - iscsi_conn_error(ddb_entry->conn, ISCSI_ERR_CONN_FAILED); + iscsi_conn_error_event(ddb_entry->conn, ISCSI_ERR_CONN_FAILED); } static struct srb* qla4xxx_get_new_srb(struct scsi_qla_host *ha, @@ -439,7 +439,7 @@ static int qla4xxx_queuecommand(struct scsi_cmnd *cmd, cmd->result = DID_NO_CONNECT << 16; goto qc_fail_command; } - goto qc_host_busy; + return SCSI_MLQUEUE_TARGET_BUSY; } if (test_bit(DPC_RESET_HA_INTR, &ha->dpc_flags)) @@ -1542,7 +1542,7 @@ static int qla4xxx_eh_device_reset(struct scsi_cmnd *cmd) DEBUG2(printk(KERN_INFO "scsi%ld: DEVICE_RESET cmd=%p jiffies = 0x%lx, to=%x," "dpc_flags=%lx, status=%x allowed=%d\n", ha->host_no, - cmd, jiffies, cmd->timeout_per_command / HZ, + cmd, jiffies, cmd->request->timeout / HZ, ha->dpc_flags, cmd->result, cmd->allowed)); /* FIXME: wait for hba to go online */ @@ -1598,7 +1598,7 @@ static int qla4xxx_eh_target_reset(struct scsi_cmnd *cmd) DEBUG2(printk(KERN_INFO "scsi%ld: TARGET_DEVICE_RESET cmd=%p jiffies = 0x%lx, " "to=%x,dpc_flags=%lx, status=%x allowed=%d\n", - ha->host_no, cmd, jiffies, cmd->timeout_per_command / HZ, + ha->host_no, cmd, jiffies, cmd->request->timeout / HZ, ha->dpc_flags, cmd->result, cmd->allowed)); stat = qla4xxx_reset_target(ha, ddb_entry); diff --git a/drivers/scsi/qlogicpti.c b/drivers/scsi/qlogicpti.c index 4a1cf6377f6..69d6ad862b6 100644 --- a/drivers/scsi/qlogicpti.c +++ b/drivers/scsi/qlogicpti.c @@ -1,6 +1,6 @@ /* qlogicpti.c: Performance Technologies QlogicISP sbus card driver. * - * Copyright (C) 1996, 2006 David S. Miller (davem@davemloft.net) + * Copyright (C) 1996, 2006, 2008 David S. Miller (davem@davemloft.net) * * A lot of this driver was directly stolen from Erik H. Moe's PCI * Qlogic ISP driver. Mucho kudos to him for this code. @@ -25,12 +25,14 @@ #include <linux/interrupt.h> #include <linux/module.h> #include <linux/jiffies.h> +#include <linux/dma-mapping.h> +#include <linux/of.h> +#include <linux/of_device.h> #include <asm/byteorder.h> #include "qlogicpti.h" -#include <asm/sbus.h> #include <asm/dma.h> #include <asm/system.h> #include <asm/ptrace.h> @@ -157,7 +159,7 @@ static inline void set_sbus_cfg1(struct qlogicpti *qpti) * is a nop and the chip ends up using the smallest burst * size. -DaveM */ - if (sbus_can_burst64(qpti->sdev) && (bursts & DMA_BURST64)) { + if (sbus_can_burst64() && (bursts & DMA_BURST64)) { val = (SBUS_CFG1_BENAB | SBUS_CFG1_B64); } else #endif @@ -684,19 +686,19 @@ static void __devexit qpti_chain_del(struct qlogicpti *qpti) static int __devinit qpti_map_regs(struct qlogicpti *qpti) { - struct sbus_dev *sdev = qpti->sdev; + struct of_device *op = qpti->op; - qpti->qregs = sbus_ioremap(&sdev->resource[0], 0, - sdev->reg_addrs[0].reg_size, - "PTI Qlogic/ISP"); + qpti->qregs = of_ioremap(&op->resource[0], 0, + resource_size(&op->resource[0]), + "PTI Qlogic/ISP"); if (!qpti->qregs) { printk("PTI: Qlogic/ISP registers are unmappable\n"); return -1; } if (qpti->is_pti) { - qpti->sreg = sbus_ioremap(&sdev->resource[0], (16 * 4096), - sizeof(unsigned char), - "PTI Qlogic/ISP statreg"); + qpti->sreg = of_ioremap(&op->resource[0], (16 * 4096), + sizeof(unsigned char), + "PTI Qlogic/ISP statreg"); if (!qpti->sreg) { printk("PTI: Qlogic/ISP status register is unmappable\n"); return -1; @@ -707,9 +709,9 @@ static int __devinit qpti_map_regs(struct qlogicpti *qpti) static int __devinit qpti_register_irq(struct qlogicpti *qpti) { - struct sbus_dev *sdev = qpti->sdev; + struct of_device *op = qpti->op; - qpti->qhost->irq = qpti->irq = sdev->irqs[0]; + qpti->qhost->irq = qpti->irq = op->irqs[0]; /* We used to try various overly-clever things to * reduce the interrupt processing overhead on @@ -732,17 +734,19 @@ fail: static void __devinit qpti_get_scsi_id(struct qlogicpti *qpti) { - qpti->scsi_id = prom_getintdefault(qpti->prom_node, - "initiator-id", - -1); + struct of_device *op = qpti->op; + struct device_node *dp; + + dp = op->node; + + qpti->scsi_id = of_getintprop_default(dp, "initiator-id", -1); if (qpti->scsi_id == -1) - qpti->scsi_id = prom_getintdefault(qpti->prom_node, - "scsi-initiator-id", - -1); + qpti->scsi_id = of_getintprop_default(dp, "scsi-initiator-id", + -1); if (qpti->scsi_id == -1) qpti->scsi_id = - prom_getintdefault(qpti->sdev->bus->prom_node, - "scsi-initiator-id", 7); + of_getintprop_default(dp->parent, + "scsi-initiator-id", 7); qpti->qhost->this_id = qpti->scsi_id; qpti->qhost->max_sectors = 64; @@ -751,12 +755,11 @@ static void __devinit qpti_get_scsi_id(struct qlogicpti *qpti) static void qpti_get_bursts(struct qlogicpti *qpti) { - struct sbus_dev *sdev = qpti->sdev; + struct of_device *op = qpti->op; u8 bursts, bmask; - bursts = prom_getintdefault(qpti->prom_node, "burst-sizes", 0xff); - bmask = prom_getintdefault(sdev->bus->prom_node, - "burst-sizes", 0xff); + bursts = of_getintprop_default(op->node, "burst-sizes", 0xff); + bmask = of_getintprop_default(op->node->parent, "burst-sizes", 0xff); if (bmask != 0xff) bursts &= bmask; if (bursts == 0xff || @@ -785,25 +788,25 @@ static void qpti_get_clock(struct qlogicpti *qpti) */ static int __devinit qpti_map_queues(struct qlogicpti *qpti) { - struct sbus_dev *sdev = qpti->sdev; + struct of_device *op = qpti->op; #define QSIZE(entries) (((entries) + 1) * QUEUE_ENTRY_LEN) - qpti->res_cpu = sbus_alloc_consistent(sdev, - QSIZE(RES_QUEUE_LEN), - &qpti->res_dvma); + qpti->res_cpu = dma_alloc_coherent(&op->dev, + QSIZE(RES_QUEUE_LEN), + &qpti->res_dvma, GFP_ATOMIC); if (qpti->res_cpu == NULL || qpti->res_dvma == 0) { printk("QPTI: Cannot map response queue.\n"); return -1; } - qpti->req_cpu = sbus_alloc_consistent(sdev, - QSIZE(QLOGICPTI_REQ_QUEUE_LEN), - &qpti->req_dvma); + qpti->req_cpu = dma_alloc_coherent(&op->dev, + QSIZE(QLOGICPTI_REQ_QUEUE_LEN), + &qpti->req_dvma, GFP_ATOMIC); if (qpti->req_cpu == NULL || qpti->req_dvma == 0) { - sbus_free_consistent(sdev, QSIZE(RES_QUEUE_LEN), - qpti->res_cpu, qpti->res_dvma); + dma_free_coherent(&op->dev, QSIZE(RES_QUEUE_LEN), + qpti->res_cpu, qpti->res_dvma); printk("QPTI: Cannot map request queue.\n"); return -1; } @@ -875,8 +878,9 @@ static inline int load_cmd(struct scsi_cmnd *Cmnd, struct Command_Entry *cmd, int sg_count; sg = scsi_sglist(Cmnd); - sg_count = sbus_map_sg(qpti->sdev, sg, scsi_sg_count(Cmnd), - Cmnd->sc_data_direction); + sg_count = dma_map_sg(&qpti->op->dev, sg, + scsi_sg_count(Cmnd), + Cmnd->sc_data_direction); ds = cmd->dataseg; cmd->segment_cnt = sg_count; @@ -914,6 +918,7 @@ static inline int load_cmd(struct scsi_cmnd *Cmnd, struct Command_Entry *cmd, ds[i].d_count = sg_dma_len(s); } sg_count -= n; + sg = s; } } else { cmd->dataseg[0].d_base = 0; @@ -1151,9 +1156,9 @@ static struct scsi_cmnd *qlogicpti_intr_handler(struct qlogicpti *qpti) Cmnd->result = DID_ERROR << 16; if (scsi_bufflen(Cmnd)) - sbus_unmap_sg(qpti->sdev, - scsi_sglist(Cmnd), scsi_sg_count(Cmnd), - Cmnd->sc_data_direction); + dma_unmap_sg(&qpti->op->dev, + scsi_sglist(Cmnd), scsi_sg_count(Cmnd), + Cmnd->sc_data_direction); qpti->cmd_count[Cmnd->device->id]--; sbus_writew(out_ptr, qpti->qregs + MBOX5); @@ -1267,34 +1272,32 @@ static struct scsi_host_template qpti_template = { .use_clustering = ENABLE_CLUSTERING, }; -static int __devinit qpti_sbus_probe(struct of_device *dev, const struct of_device_id *match) +static int __devinit qpti_sbus_probe(struct of_device *op, const struct of_device_id *match) { - static int nqptis; - struct sbus_dev *sdev = to_sbus_device(&dev->dev); - struct device_node *dp = dev->node; struct scsi_host_template *tpnt = match->data; + struct device_node *dp = op->node; struct Scsi_Host *host; struct qlogicpti *qpti; + static int nqptis; const char *fcode; /* Sometimes Antares cards come up not completely * setup, and we get a report of a zero IRQ. */ - if (sdev->irqs[0] == 0) + if (op->irqs[0] == 0) return -ENODEV; host = scsi_host_alloc(tpnt, sizeof(struct qlogicpti)); if (!host) return -ENOMEM; - qpti = (struct qlogicpti *) host->hostdata; + qpti = shost_priv(host); host->max_id = MAX_TARGETS; qpti->qhost = host; - qpti->sdev = sdev; + qpti->op = op; qpti->qpti_id = nqptis; - qpti->prom_node = sdev->prom_node; - strcpy(qpti->prom_name, sdev->ofdev.node->name); + strcpy(qpti->prom_name, op->node->name); qpti->is_pti = strcmp(qpti->prom_name, "QLGC,isp"); if (qpti_map_regs(qpti) < 0) @@ -1340,12 +1343,12 @@ static int __devinit qpti_sbus_probe(struct of_device *dev, const struct of_devi (qpti->ultra ? "Ultra" : "Fast"), (qpti->differential ? "differential" : "single ended")); - if (scsi_add_host(host, &dev->dev)) { + if (scsi_add_host(host, &op->dev)) { printk("qlogicpti%d: Failed scsi_add_host\n", qpti->qpti_id); goto fail_unmap_queues; } - dev_set_drvdata(&sdev->ofdev.dev, qpti); + dev_set_drvdata(&op->dev, qpti); qpti_chain_add(qpti); @@ -1356,19 +1359,20 @@ static int __devinit qpti_sbus_probe(struct of_device *dev, const struct of_devi fail_unmap_queues: #define QSIZE(entries) (((entries) + 1) * QUEUE_ENTRY_LEN) - sbus_free_consistent(qpti->sdev, - QSIZE(RES_QUEUE_LEN), - qpti->res_cpu, qpti->res_dvma); - sbus_free_consistent(qpti->sdev, - QSIZE(QLOGICPTI_REQ_QUEUE_LEN), - qpti->req_cpu, qpti->req_dvma); + dma_free_coherent(&op->dev, + QSIZE(RES_QUEUE_LEN), + qpti->res_cpu, qpti->res_dvma); + dma_free_coherent(&op->dev, + QSIZE(QLOGICPTI_REQ_QUEUE_LEN), + qpti->req_cpu, qpti->req_dvma); #undef QSIZE fail_unmap_regs: - sbus_iounmap(qpti->qregs, - qpti->sdev->reg_addrs[0].reg_size); + of_iounmap(&op->resource[0], qpti->qregs, + resource_size(&op->resource[0])); if (qpti->is_pti) - sbus_iounmap(qpti->sreg, sizeof(unsigned char)); + of_iounmap(&op->resource[0], qpti->sreg, + sizeof(unsigned char)); fail_free_irq: free_irq(qpti->irq, qpti); @@ -1379,9 +1383,9 @@ fail_unlink: return -ENODEV; } -static int __devexit qpti_sbus_remove(struct of_device *dev) +static int __devexit qpti_sbus_remove(struct of_device *op) { - struct qlogicpti *qpti = dev_get_drvdata(&dev->dev); + struct qlogicpti *qpti = dev_get_drvdata(&op->dev); qpti_chain_del(qpti); @@ -1394,24 +1398,25 @@ static int __devexit qpti_sbus_remove(struct of_device *dev) free_irq(qpti->irq, qpti); #define QSIZE(entries) (((entries) + 1) * QUEUE_ENTRY_LEN) - sbus_free_consistent(qpti->sdev, - QSIZE(RES_QUEUE_LEN), - qpti->res_cpu, qpti->res_dvma); - sbus_free_consistent(qpti->sdev, - QSIZE(QLOGICPTI_REQ_QUEUE_LEN), - qpti->req_cpu, qpti->req_dvma); + dma_free_coherent(&op->dev, + QSIZE(RES_QUEUE_LEN), + qpti->res_cpu, qpti->res_dvma); + dma_free_coherent(&op->dev, + QSIZE(QLOGICPTI_REQ_QUEUE_LEN), + qpti->req_cpu, qpti->req_dvma); #undef QSIZE - sbus_iounmap(qpti->qregs, qpti->sdev->reg_addrs[0].reg_size); + of_iounmap(&op->resource[0], qpti->qregs, + resource_size(&op->resource[0])); if (qpti->is_pti) - sbus_iounmap(qpti->sreg, sizeof(unsigned char)); + of_iounmap(&op->resource[0], qpti->sreg, sizeof(unsigned char)); scsi_host_put(qpti->qhost); return 0; } -static struct of_device_id qpti_match[] = { +static const struct of_device_id qpti_match[] = { { .name = "ptisp", .data = &qpti_template, @@ -1441,7 +1446,7 @@ static struct of_platform_driver qpti_sbus_driver = { static int __init qpti_init(void) { - return of_register_driver(&qpti_sbus_driver, &sbus_bus_type); + return of_register_driver(&qpti_sbus_driver, &of_bus_type); } static void __exit qpti_exit(void) @@ -1452,7 +1457,7 @@ static void __exit qpti_exit(void) MODULE_DESCRIPTION("QlogicISP SBUS driver"); MODULE_AUTHOR("David S. Miller (davem@davemloft.net)"); MODULE_LICENSE("GPL"); -MODULE_VERSION("2.0"); +MODULE_VERSION("2.1"); module_init(qpti_init); module_exit(qpti_exit); diff --git a/drivers/scsi/qlogicpti.h b/drivers/scsi/qlogicpti.h index ef6da2df584..9c053bbaa87 100644 --- a/drivers/scsi/qlogicpti.h +++ b/drivers/scsi/qlogicpti.h @@ -342,7 +342,7 @@ struct qlogicpti { u_int req_in_ptr; /* index of next request slot */ u_int res_out_ptr; /* index of next result slot */ long send_marker; /* must we send a marker? */ - struct sbus_dev *sdev; + struct of_device *op; unsigned long __pad; int cmd_count[MAX_TARGETS]; diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c index ee6be596503..f8b79d401d5 100644 --- a/drivers/scsi/scsi.c +++ b/drivers/scsi/scsi.c @@ -291,7 +291,6 @@ struct scsi_cmnd *scsi_get_command(struct scsi_device *dev, gfp_t gfp_mask) unsigned long flags; cmd->device = dev; - init_timer(&cmd->eh_timeout); INIT_LIST_HEAD(&cmd->list); spin_lock_irqsave(&dev->list_lock, flags); list_add_tail(&cmd->list, &dev->cmd_list); @@ -652,26 +651,33 @@ int scsi_dispatch_cmd(struct scsi_cmnd *cmd) unsigned long timeout; int rtn = 0; + /* + * We will use a queued command if possible, otherwise we will + * emulate the queuing and calling of completion function ourselves. + */ + atomic_inc(&cmd->device->iorequest_cnt); + /* check if the device is still usable */ if (unlikely(cmd->device->sdev_state == SDEV_DEL)) { /* in SDEV_DEL we error all commands. DID_NO_CONNECT * returns an immediate error upwards, and signals * that the device is no longer present */ cmd->result = DID_NO_CONNECT << 16; - atomic_inc(&cmd->device->iorequest_cnt); - __scsi_done(cmd); + scsi_done(cmd); /* return 0 (because the command has been processed) */ goto out; } - /* Check to see if the scsi lld put this device into state SDEV_BLOCK. */ - if (unlikely(cmd->device->sdev_state == SDEV_BLOCK)) { + /* Check to see if the scsi lld made this device blocked. */ + if (unlikely(scsi_device_blocked(cmd->device))) { /* - * in SDEV_BLOCK, the command is just put back on the device - * queue. The suspend state has already blocked the queue so - * future requests should not occur until the device - * transitions out of the suspend state. + * in blocked state, the command is just put back on + * the device queue. The suspend state has already + * blocked the queue so future requests should not + * occur until the device transitions out of the + * suspend state. */ + scsi_queue_insert(cmd, SCSI_MLQUEUE_DEVICE_BUSY); SCSI_LOG_MLQUEUE(3, printk("queuecommand : device blocked \n")); @@ -714,21 +720,9 @@ int scsi_dispatch_cmd(struct scsi_cmnd *cmd) host->resetting = 0; } - /* - * AK: unlikely race here: for some reason the timer could - * expire before the serial number is set up below. - */ - scsi_add_timer(cmd, cmd->timeout_per_command, scsi_times_out); - scsi_log_send(cmd); /* - * We will use a queued command if possible, otherwise we will - * emulate the queuing and calling of completion function ourselves. - */ - atomic_inc(&cmd->device->iorequest_cnt); - - /* * Before we queue this command, check if the command * length exceeds what the host adapter can handle. */ @@ -744,6 +738,12 @@ int scsi_dispatch_cmd(struct scsi_cmnd *cmd) } spin_lock_irqsave(host->host_lock, flags); + /* + * AK: unlikely race here: for some reason the timer could + * expire before the serial number is set up below. + * + * TODO: kill serial or move to blk layer + */ scsi_cmd_get_serial(host, cmd); if (unlikely(host->shost_state == SHOST_DEL)) { @@ -754,12 +754,12 @@ int scsi_dispatch_cmd(struct scsi_cmnd *cmd) } spin_unlock_irqrestore(host->host_lock, flags); if (rtn) { - if (scsi_delete_timer(cmd)) { - atomic_inc(&cmd->device->iodone_cnt); - scsi_queue_insert(cmd, - (rtn == SCSI_MLQUEUE_DEVICE_BUSY) ? - rtn : SCSI_MLQUEUE_HOST_BUSY); - } + if (rtn != SCSI_MLQUEUE_DEVICE_BUSY && + rtn != SCSI_MLQUEUE_TARGET_BUSY) + rtn = SCSI_MLQUEUE_HOST_BUSY; + + scsi_queue_insert(cmd, rtn); + SCSI_LOG_MLQUEUE(3, printk("queuecommand : request rejected\n")); } @@ -770,24 +770,6 @@ int scsi_dispatch_cmd(struct scsi_cmnd *cmd) } /** - * scsi_req_abort_cmd -- Request command recovery for the specified command - * @cmd: pointer to the SCSI command of interest - * - * This function requests that SCSI Core start recovery for the - * command by deleting the timer and adding the command to the eh - * queue. It can be called by either LLDDs or SCSI Core. LLDDs who - * implement their own error recovery MAY ignore the timeout event if - * they generated scsi_req_abort_cmd. - */ -void scsi_req_abort_cmd(struct scsi_cmnd *cmd) -{ - if (!scsi_delete_timer(cmd)) - return; - scsi_times_out(cmd); -} -EXPORT_SYMBOL(scsi_req_abort_cmd); - -/** * scsi_done - Enqueue the finished SCSI command into the done queue. * @cmd: The SCSI Command for which a low-level device driver (LLDD) gives * ownership back to SCSI Core -- i.e. the LLDD has finished with it. @@ -802,42 +784,7 @@ EXPORT_SYMBOL(scsi_req_abort_cmd); */ static void scsi_done(struct scsi_cmnd *cmd) { - /* - * We don't have to worry about this one timing out anymore. - * If we are unable to remove the timer, then the command - * has already timed out. In which case, we have no choice but to - * let the timeout function run, as we have no idea where in fact - * that function could really be. It might be on another processor, - * etc, etc. - */ - if (!scsi_delete_timer(cmd)) - return; - __scsi_done(cmd); -} - -/* Private entry to scsi_done() to complete a command when the timer - * isn't running --- used by scsi_times_out */ -void __scsi_done(struct scsi_cmnd *cmd) -{ - struct request *rq = cmd->request; - - /* - * Set the serial numbers back to zero - */ - cmd->serial_number = 0; - - atomic_inc(&cmd->device->iodone_cnt); - if (cmd->result) - atomic_inc(&cmd->device->ioerr_cnt); - - BUG_ON(!rq); - - /* - * The uptodate/nbytes values don't matter, as we allow partial - * completes and thus will check this in the softirq callback - */ - rq->completion_data = cmd; - blk_complete_request(rq); + blk_complete_request(cmd->request); } /* Move this to a header if it becomes more generally useful */ @@ -857,6 +804,7 @@ static struct scsi_driver *scsi_cmd_to_driver(struct scsi_cmnd *cmd) void scsi_finish_command(struct scsi_cmnd *cmd) { struct scsi_device *sdev = cmd->device; + struct scsi_target *starget = scsi_target(sdev); struct Scsi_Host *shost = sdev->host; struct scsi_driver *drv; unsigned int good_bytes; @@ -872,6 +820,7 @@ void scsi_finish_command(struct scsi_cmnd *cmd) * XXX(hch): What about locking? */ shost->host_blocked = 0; + starget->target_blocked = 0; sdev->device_blocked = 0; /* diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index 880051c89bd..94ed262bdf0 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -112,69 +112,8 @@ int scsi_eh_scmd_add(struct scsi_cmnd *scmd, int eh_flag) } /** - * scsi_add_timer - Start timeout timer for a single scsi command. - * @scmd: scsi command that is about to start running. - * @timeout: amount of time to allow this command to run. - * @complete: timeout function to call if timer isn't canceled. - * - * Notes: - * This should be turned into an inline function. Each scsi command - * has its own timer, and as it is added to the queue, we set up the - * timer. When the command completes, we cancel the timer. - */ -void scsi_add_timer(struct scsi_cmnd *scmd, int timeout, - void (*complete)(struct scsi_cmnd *)) -{ - - /* - * If the clock was already running for this command, then - * first delete the timer. The timer handling code gets rather - * confused if we don't do this. - */ - if (scmd->eh_timeout.function) - del_timer(&scmd->eh_timeout); - - scmd->eh_timeout.data = (unsigned long)scmd; - scmd->eh_timeout.expires = jiffies + timeout; - scmd->eh_timeout.function = (void (*)(unsigned long)) complete; - - SCSI_LOG_ERROR_RECOVERY(5, printk("%s: scmd: %p, time:" - " %d, (%p)\n", __func__, - scmd, timeout, complete)); - - add_timer(&scmd->eh_timeout); -} - -/** - * scsi_delete_timer - Delete/cancel timer for a given function. - * @scmd: Cmd that we are canceling timer for - * - * Notes: - * This should be turned into an inline function. - * - * Return value: - * 1 if we were able to detach the timer. 0 if we blew it, and the - * timer function has already started to run. - */ -int scsi_delete_timer(struct scsi_cmnd *scmd) -{ - int rtn; - - rtn = del_timer(&scmd->eh_timeout); - - SCSI_LOG_ERROR_RECOVERY(5, printk("%s: scmd: %p," - " rtn: %d\n", __func__, - scmd, rtn)); - - scmd->eh_timeout.data = (unsigned long)NULL; - scmd->eh_timeout.function = NULL; - - return rtn; -} - -/** * scsi_times_out - Timeout function for normal scsi commands. - * @scmd: Cmd that is timing out. + * @req: request that is timing out. * * Notes: * We do not need to lock this. There is the potential for a race @@ -182,9 +121,11 @@ int scsi_delete_timer(struct scsi_cmnd *scmd) * normal completion function determines that the timer has already * fired, then it mustn't do anything. */ -void scsi_times_out(struct scsi_cmnd *scmd) +enum blk_eh_timer_return scsi_times_out(struct request *req) { - enum scsi_eh_timer_return (* eh_timed_out)(struct scsi_cmnd *); + struct scsi_cmnd *scmd = req->special; + enum blk_eh_timer_return (*eh_timed_out)(struct scsi_cmnd *); + enum blk_eh_timer_return rtn = BLK_EH_NOT_HANDLED; scsi_log_completion(scmd, TIMEOUT_ERROR); @@ -196,22 +137,20 @@ void scsi_times_out(struct scsi_cmnd *scmd) eh_timed_out = NULL; if (eh_timed_out) - switch (eh_timed_out(scmd)) { - case EH_HANDLED: - __scsi_done(scmd); - return; - case EH_RESET_TIMER: - scsi_add_timer(scmd, scmd->timeout_per_command, - scsi_times_out); - return; - case EH_NOT_HANDLED: + rtn = eh_timed_out(scmd); + switch (rtn) { + case BLK_EH_NOT_HANDLED: break; + default: + return rtn; } if (unlikely(!scsi_eh_scmd_add(scmd, SCSI_EH_CANCEL_CMD))) { scmd->result |= DID_TIME_OUT << 16; - __scsi_done(scmd); + return BLK_EH_HANDLED; } + + return BLK_EH_NOT_HANDLED; } /** @@ -391,7 +330,7 @@ static int scsi_check_sense(struct scsi_cmnd *scmd) case HARDWARE_ERROR: if (scmd->device->retry_hwerror) - return NEEDS_RETRY; + return ADD_TO_MLQUEUE; else return SUCCESS; @@ -1126,10 +1065,10 @@ static int scsi_eh_target_reset(struct Scsi_Host *shost, struct list_head *done_q) { struct scsi_cmnd *scmd, *tgtr_scmd, *next; - unsigned int id; + unsigned int id = 0; int rtn; - for (id = 0; id <= shost->max_id; id++) { + do { tgtr_scmd = NULL; list_for_each_entry(scmd, work_q, eh_entry) { if (id == scmd_id(scmd)) { @@ -1137,8 +1076,18 @@ static int scsi_eh_target_reset(struct Scsi_Host *shost, break; } } + if (!tgtr_scmd) { + /* not one exactly equal; find the next highest */ + list_for_each_entry(scmd, work_q, eh_entry) { + if (scmd_id(scmd) > id && + (!tgtr_scmd || + scmd_id(tgtr_scmd) > scmd_id(scmd))) + tgtr_scmd = scmd; + } + } if (!tgtr_scmd) - continue; + /* no more commands, that's it */ + break; SCSI_LOG_ERROR_RECOVERY(3, printk("%s: Sending target reset " "to target %d\n", @@ -1157,7 +1106,8 @@ static int scsi_eh_target_reset(struct Scsi_Host *shost, " failed target: " "%d\n", current->comm, id)); - } + id++; + } while(id != 0); return list_empty(work_q); } @@ -1280,6 +1230,40 @@ static void scsi_eh_offline_sdevs(struct list_head *work_q, } /** + * scsi_noretry_cmd - determinte if command should be failed fast + * @scmd: SCSI cmd to examine. + */ +int scsi_noretry_cmd(struct scsi_cmnd *scmd) +{ + switch (host_byte(scmd->result)) { + case DID_OK: + break; + case DID_BUS_BUSY: + return blk_failfast_transport(scmd->request); + case DID_PARITY: + return blk_failfast_dev(scmd->request); + case DID_ERROR: + if (msg_byte(scmd->result) == COMMAND_COMPLETE && + status_byte(scmd->result) == RESERVATION_CONFLICT) + return 0; + /* fall through */ + case DID_SOFT_ERROR: + return blk_failfast_driver(scmd->request); + } + + switch (status_byte(scmd->result)) { + case CHECK_CONDITION: + /* + * assume caller has checked sense and determinted + * the check condition was retryable. + */ + return blk_failfast_dev(scmd->request); + } + + return 0; +} + +/** * scsi_decide_disposition - Disposition a cmd on return from LLD. * @scmd: SCSI cmd to examine. * @@ -1351,7 +1335,20 @@ int scsi_decide_disposition(struct scsi_cmnd *scmd) case DID_REQUEUE: return ADD_TO_MLQUEUE; - + case DID_TRANSPORT_DISRUPTED: + /* + * LLD/transport was disrupted during processing of the IO. + * The transport class is now blocked/blocking, + * and the transport will decide what to do with the IO + * based on its timers and recovery capablilities. + */ + return ADD_TO_MLQUEUE; + case DID_TRANSPORT_FAILFAST: + /* + * The transport decided to failfast the IO (most likely + * the fast io fail tmo fired), so send IO directly upwards. + */ + return SUCCESS; case DID_ERROR: if (msg_byte(scmd->result) == COMMAND_COMPLETE && status_byte(scmd->result) == RESERVATION_CONFLICT) @@ -1444,7 +1441,7 @@ int scsi_decide_disposition(struct scsi_cmnd *scmd) * even if the request is marked fast fail, we still requeue * for queue congestion conditions (QUEUE_FULL or BUSY) */ if ((++scmd->retries) <= scmd->allowed - && !blk_noretry_request(scmd->request)) { + && !scsi_noretry_cmd(scmd)) { return NEEDS_RETRY; } else { /* @@ -1569,7 +1566,7 @@ void scsi_eh_flush_done_q(struct list_head *done_q) list_for_each_entry_safe(scmd, next, done_q, eh_entry) { list_del_init(&scmd->eh_entry); if (scsi_device_online(scmd->device) && - !blk_noretry_request(scmd->request) && + !scsi_noretry_cmd(scmd) && (++scmd->retries <= scmd->allowed)) { SCSI_LOG_ERROR_RECOVERY(3, printk("%s: flush" " retry cmd: %p\n", @@ -1793,7 +1790,6 @@ scsi_reset_provider(struct scsi_device *dev, int flag) blk_rq_init(NULL, &req); scmd->request = &req; - memset(&scmd->eh_timeout, 0, sizeof(scmd->eh_timeout)); scmd->cmnd = req.cmd; @@ -1804,8 +1800,6 @@ scsi_reset_provider(struct scsi_device *dev, int flag) scmd->sc_data_direction = DMA_BIDIRECTIONAL; - init_timer(&scmd->eh_timeout); - spin_lock_irqsave(shost->host_lock, flags); shost->tmf_in_progress = 1; spin_unlock_irqrestore(shost->host_lock, flags); diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index ff5d56b3ee4..e5a9526d203 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -114,6 +114,7 @@ int scsi_queue_insert(struct scsi_cmnd *cmd, int reason) { struct Scsi_Host *host = cmd->device->host; struct scsi_device *device = cmd->device; + struct scsi_target *starget = scsi_target(device); struct request_queue *q = device->request_queue; unsigned long flags; @@ -133,10 +134,17 @@ int scsi_queue_insert(struct scsi_cmnd *cmd, int reason) * if a command is requeued with no other commands outstanding * either for the device or for the host. */ - if (reason == SCSI_MLQUEUE_HOST_BUSY) + switch (reason) { + case SCSI_MLQUEUE_HOST_BUSY: host->host_blocked = host->max_host_blocked; - else if (reason == SCSI_MLQUEUE_DEVICE_BUSY) + break; + case SCSI_MLQUEUE_DEVICE_BUSY: device->device_blocked = device->max_device_blocked; + break; + case SCSI_MLQUEUE_TARGET_BUSY: + starget->target_blocked = starget->max_target_blocked; + break; + } /* * Decrement the counters, since these commands are no longer @@ -460,10 +468,12 @@ static void scsi_init_cmd_errh(struct scsi_cmnd *cmd) void scsi_device_unbusy(struct scsi_device *sdev) { struct Scsi_Host *shost = sdev->host; + struct scsi_target *starget = scsi_target(sdev); unsigned long flags; spin_lock_irqsave(shost->host_lock, flags); shost->host_busy--; + starget->target_busy--; if (unlikely(scsi_host_in_recovery(shost) && (shost->host_failed || shost->host_eh_scheduled))) scsi_eh_wakeup(shost); @@ -519,6 +529,13 @@ static void scsi_single_lun_run(struct scsi_device *current_sdev) spin_unlock_irqrestore(shost->host_lock, flags); } +static inline int scsi_target_is_busy(struct scsi_target *starget) +{ + return ((starget->can_queue > 0 && + starget->target_busy >= starget->can_queue) || + starget->target_blocked); +} + /* * Function: scsi_run_queue() * @@ -533,7 +550,7 @@ static void scsi_single_lun_run(struct scsi_device *current_sdev) */ static void scsi_run_queue(struct request_queue *q) { - struct scsi_device *sdev = q->queuedata; + struct scsi_device *starved_head = NULL, *sdev = q->queuedata; struct Scsi_Host *shost = sdev->host; unsigned long flags; @@ -560,6 +577,21 @@ static void scsi_run_queue(struct request_queue *q) */ sdev = list_entry(shost->starved_list.next, struct scsi_device, starved_entry); + /* + * The *queue_ready functions can add a device back onto the + * starved list's tail, so we must check for a infinite loop. + */ + if (sdev == starved_head) + break; + if (!starved_head) + starved_head = sdev; + + if (scsi_target_is_busy(scsi_target(sdev))) { + list_move_tail(&sdev->starved_entry, + &shost->starved_list); + continue; + } + list_del_init(&sdev->starved_entry); spin_unlock(shost->host_lock); @@ -575,13 +607,6 @@ static void scsi_run_queue(struct request_queue *q) spin_unlock(sdev->request_queue->queue_lock); spin_lock(shost->host_lock); - if (unlikely(!list_empty(&sdev->starved_entry))) - /* - * sdev lost a race, and was put back on the - * starved list. This is unlikely but without this - * in theory we could loop forever. - */ - break; } spin_unlock_irqrestore(shost->host_lock, flags); @@ -681,7 +706,7 @@ static struct scsi_cmnd *scsi_end_request(struct scsi_cmnd *cmd, int error, leftover = req->data_len; /* kill remainder if no retrys */ - if (error && blk_noretry_request(req)) + if (error && scsi_noretry_cmd(cmd)) blk_end_request(req, error, leftover); else { if (requeue) { @@ -852,7 +877,7 @@ static void scsi_end_bidi_request(struct scsi_cmnd *cmd) void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes) { int result = cmd->result; - int this_count = scsi_bufflen(cmd); + int this_count; struct request_queue *q = cmd->device->request_queue; struct request *req = cmd->request; int error = 0; @@ -908,6 +933,7 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes) */ if (scsi_end_request(cmd, error, good_bytes, result == 0) == NULL) return; + this_count = blk_rq_bytes(req); /* good_bytes = 0, or (inclusive) there were leftovers and * result = 0, so scsi_end_request couldn't retry. @@ -1180,7 +1206,6 @@ int scsi_setup_blk_pc_cmnd(struct scsi_device *sdev, struct request *req) cmd->transfersize = req->data_len; cmd->allowed = req->retries; - cmd->timeout_per_command = req->timeout; return BLKPREP_OK; } EXPORT_SYMBOL(scsi_setup_blk_pc_cmnd); @@ -1250,6 +1275,7 @@ int scsi_prep_state_check(struct scsi_device *sdev, struct request *req) break; case SDEV_QUIESCE: case SDEV_BLOCK: + case SDEV_CREATED_BLOCK: /* * If the devices is blocked we defer normal commands. */ @@ -1343,6 +1369,52 @@ static inline int scsi_dev_queue_ready(struct request_queue *q, return 1; } + +/* + * scsi_target_queue_ready: checks if there we can send commands to target + * @sdev: scsi device on starget to check. + * + * Called with the host lock held. + */ +static inline int scsi_target_queue_ready(struct Scsi_Host *shost, + struct scsi_device *sdev) +{ + struct scsi_target *starget = scsi_target(sdev); + + if (starget->single_lun) { + if (starget->starget_sdev_user && + starget->starget_sdev_user != sdev) + return 0; + starget->starget_sdev_user = sdev; + } + + if (starget->target_busy == 0 && starget->target_blocked) { + /* + * unblock after target_blocked iterates to zero + */ + if (--starget->target_blocked == 0) { + SCSI_LOG_MLQUEUE(3, starget_printk(KERN_INFO, starget, + "unblocking target at zero depth\n")); + } else { + blk_plug_device(sdev->request_queue); + return 0; + } + } + + if (scsi_target_is_busy(starget)) { + if (list_empty(&sdev->starved_entry)) { + list_add_tail(&sdev->starved_entry, + &shost->starved_list); + return 0; + } + } + + /* We're OK to process the command, so we can't be starved */ + if (!list_empty(&sdev->starved_entry)) + list_del_init(&sdev->starved_entry); + return 1; +} + /* * scsi_host_queue_ready: if we can send requests to shost, return 1 else * return 0. We must end up running the queue again whenever 0 is @@ -1389,6 +1461,7 @@ static void scsi_kill_request(struct request *req, struct request_queue *q) { struct scsi_cmnd *cmd = req->special; struct scsi_device *sdev = cmd->device; + struct scsi_target *starget = scsi_target(sdev); struct Scsi_Host *shost = sdev->host; blkdev_dequeue_request(req); @@ -1412,20 +1485,30 @@ static void scsi_kill_request(struct request *req, struct request_queue *q) spin_unlock(sdev->request_queue->queue_lock); spin_lock(shost->host_lock); shost->host_busy++; + starget->target_busy++; spin_unlock(shost->host_lock); spin_lock(sdev->request_queue->queue_lock); - __scsi_done(cmd); + blk_complete_request(req); } static void scsi_softirq_done(struct request *rq) { - struct scsi_cmnd *cmd = rq->completion_data; - unsigned long wait_for = (cmd->allowed + 1) * cmd->timeout_per_command; + struct scsi_cmnd *cmd = rq->special; + unsigned long wait_for = (cmd->allowed + 1) * rq->timeout; int disposition; INIT_LIST_HEAD(&cmd->eh_entry); + /* + * Set the serial numbers back to zero + */ + cmd->serial_number = 0; + + atomic_inc(&cmd->device->iodone_cnt); + if (cmd->result) + atomic_inc(&cmd->device->ioerr_cnt); + disposition = scsi_decide_disposition(cmd); if (disposition != SUCCESS && time_before(cmd->jiffies_at_alloc + wait_for, jiffies)) { @@ -1540,14 +1623,13 @@ static void scsi_request_fn(struct request_queue *q) goto not_ready; } + if (!scsi_target_queue_ready(shost, sdev)) + goto not_ready; + if (!scsi_host_queue_ready(q, shost, sdev)) goto not_ready; - if (scsi_target(sdev)->single_lun) { - if (scsi_target(sdev)->starget_sdev_user && - scsi_target(sdev)->starget_sdev_user != sdev) - goto not_ready; - scsi_target(sdev)->starget_sdev_user = sdev; - } + + scsi_target(sdev)->target_busy++; shost->host_busy++; /* @@ -1674,6 +1756,7 @@ struct request_queue *scsi_alloc_queue(struct scsi_device *sdev) blk_queue_prep_rq(q, scsi_prep_fn); blk_queue_softirq_done(q, scsi_softirq_done); + blk_queue_rq_timed_out(q, scsi_times_out); return q; } @@ -2063,10 +2146,13 @@ scsi_device_set_state(struct scsi_device *sdev, enum scsi_device_state state) switch (state) { case SDEV_CREATED: - /* There are no legal states that come back to - * created. This is the manually initialised start - * state */ - goto illegal; + switch (oldstate) { + case SDEV_CREATED_BLOCK: + break; + default: + goto illegal; + } + break; case SDEV_RUNNING: switch (oldstate) { @@ -2104,8 +2190,17 @@ scsi_device_set_state(struct scsi_device *sdev, enum scsi_device_state state) case SDEV_BLOCK: switch (oldstate) { - case SDEV_CREATED: case SDEV_RUNNING: + case SDEV_CREATED_BLOCK: + break; + default: + goto illegal; + } + break; + + case SDEV_CREATED_BLOCK: + switch (oldstate) { + case SDEV_CREATED: break; default: goto illegal; @@ -2393,8 +2488,12 @@ scsi_internal_device_block(struct scsi_device *sdev) int err = 0; err = scsi_device_set_state(sdev, SDEV_BLOCK); - if (err) - return err; + if (err) { + err = scsi_device_set_state(sdev, SDEV_CREATED_BLOCK); + + if (err) + return err; + } /* * The device has transitioned to SDEV_BLOCK. Stop the @@ -2437,8 +2536,12 @@ scsi_internal_device_unblock(struct scsi_device *sdev) * and goose the device queue if successful. */ err = scsi_device_set_state(sdev, SDEV_RUNNING); - if (err) - return err; + if (err) { + err = scsi_device_set_state(sdev, SDEV_CREATED); + + if (err) + return err; + } spin_lock_irqsave(q->queue_lock, flags); blk_start_queue(q); diff --git a/drivers/scsi/scsi_netlink.c b/drivers/scsi/scsi_netlink.c index ae7ed9a2266..b37e133de80 100644 --- a/drivers/scsi/scsi_netlink.c +++ b/drivers/scsi/scsi_netlink.c @@ -21,6 +21,7 @@ #include <linux/time.h> #include <linux/jiffies.h> #include <linux/security.h> +#include <linux/delay.h> #include <net/sock.h> #include <net/netlink.h> @@ -30,6 +31,39 @@ struct sock *scsi_nl_sock = NULL; EXPORT_SYMBOL_GPL(scsi_nl_sock); +static DEFINE_SPINLOCK(scsi_nl_lock); +static struct list_head scsi_nl_drivers; + +static u32 scsi_nl_state; +#define STATE_EHANDLER_BSY 0x00000001 + +struct scsi_nl_transport { + int (*msg_handler)(struct sk_buff *); + void (*event_handler)(struct notifier_block *, unsigned long, void *); + unsigned int refcnt; + int flags; +}; + +/* flags values (bit flags) */ +#define HANDLER_DELETING 0x1 + +static struct scsi_nl_transport transports[SCSI_NL_MAX_TRANSPORTS] = + { {NULL, }, }; + + +struct scsi_nl_drvr { + struct list_head next; + int (*dmsg_handler)(struct Scsi_Host *shost, void *payload, + u32 len, u32 pid); + void (*devt_handler)(struct notifier_block *nb, + unsigned long event, void *notify_ptr); + struct scsi_host_template *hostt; + u64 vendor_id; + unsigned int refcnt; + int flags; +}; + + /** * scsi_nl_rcv_msg - Receive message handler. @@ -45,8 +79,9 @@ scsi_nl_rcv_msg(struct sk_buff *skb) { struct nlmsghdr *nlh; struct scsi_nl_hdr *hdr; - uint32_t rlen; - int err; + unsigned long flags; + u32 rlen; + int err, tport; while (skb->len >= NLMSG_SPACE(0)) { err = 0; @@ -65,7 +100,7 @@ scsi_nl_rcv_msg(struct sk_buff *skb) if (nlh->nlmsg_type != SCSI_TRANSPORT_MSG) { err = -EBADMSG; - return; + goto next_msg; } hdr = NLMSG_DATA(nlh); @@ -83,12 +118,27 @@ scsi_nl_rcv_msg(struct sk_buff *skb) if (nlh->nlmsg_len < (sizeof(*nlh) + hdr->msglen)) { printk(KERN_WARNING "%s: discarding partial message\n", __func__); - return; + goto next_msg; } /* - * We currently don't support anyone sending us a message + * Deliver message to the appropriate transport */ + spin_lock_irqsave(&scsi_nl_lock, flags); + + tport = hdr->transport; + if ((tport < SCSI_NL_MAX_TRANSPORTS) && + !(transports[tport].flags & HANDLER_DELETING) && + (transports[tport].msg_handler)) { + transports[tport].refcnt++; + spin_unlock_irqrestore(&scsi_nl_lock, flags); + err = transports[tport].msg_handler(skb); + spin_lock_irqsave(&scsi_nl_lock, flags); + transports[tport].refcnt--; + } else + err = -ENOENT; + + spin_unlock_irqrestore(&scsi_nl_lock, flags); next_msg: if ((err) || (nlh->nlmsg_flags & NLM_F_ACK)) @@ -110,14 +160,42 @@ static int scsi_nl_rcv_event(struct notifier_block *this, unsigned long event, void *ptr) { struct netlink_notify *n = ptr; + struct scsi_nl_drvr *driver; + unsigned long flags; + int tport; if (n->protocol != NETLINK_SCSITRANSPORT) return NOTIFY_DONE; + spin_lock_irqsave(&scsi_nl_lock, flags); + scsi_nl_state |= STATE_EHANDLER_BSY; + /* - * Currently, we are not tracking PID's, etc. There is nothing - * to handle. + * Pass event on to any transports that may be listening */ + for (tport = 0; tport < SCSI_NL_MAX_TRANSPORTS; tport++) { + if (!(transports[tport].flags & HANDLER_DELETING) && + (transports[tport].event_handler)) { + spin_unlock_irqrestore(&scsi_nl_lock, flags); + transports[tport].event_handler(this, event, ptr); + spin_lock_irqsave(&scsi_nl_lock, flags); + } + } + + /* + * Pass event on to any drivers that may be listening + */ + list_for_each_entry(driver, &scsi_nl_drivers, next) { + if (!(driver->flags & HANDLER_DELETING) && + (driver->devt_handler)) { + spin_unlock_irqrestore(&scsi_nl_lock, flags); + driver->devt_handler(this, event, ptr); + spin_lock_irqsave(&scsi_nl_lock, flags); + } + } + + scsi_nl_state &= ~STATE_EHANDLER_BSY; + spin_unlock_irqrestore(&scsi_nl_lock, flags); return NOTIFY_DONE; } @@ -128,7 +206,281 @@ static struct notifier_block scsi_netlink_notifier = { /** - * scsi_netlink_init - Called by SCSI subsystem to intialize the SCSI transport netlink interface + * GENERIC SCSI transport receive and event handlers + **/ + +/** + * scsi_generic_msg_handler - receive message handler for GENERIC transport + * messages + * + * @skb: socket receive buffer + * + **/ +static int +scsi_generic_msg_handler(struct sk_buff *skb) +{ + struct nlmsghdr *nlh = nlmsg_hdr(skb); + struct scsi_nl_hdr *snlh = NLMSG_DATA(nlh); + struct scsi_nl_drvr *driver; + struct Scsi_Host *shost; + unsigned long flags; + int err = 0, match, pid; + + pid = NETLINK_CREDS(skb)->pid; + + switch (snlh->msgtype) { + case SCSI_NL_SHOST_VENDOR: + { + struct scsi_nl_host_vendor_msg *msg = NLMSG_DATA(nlh); + + /* Locate the driver that corresponds to the message */ + spin_lock_irqsave(&scsi_nl_lock, flags); + match = 0; + list_for_each_entry(driver, &scsi_nl_drivers, next) { + if (driver->vendor_id == msg->vendor_id) { + match = 1; + break; + } + } + + if ((!match) || (!driver->dmsg_handler)) { + spin_unlock_irqrestore(&scsi_nl_lock, flags); + err = -ESRCH; + goto rcv_exit; + } + + if (driver->flags & HANDLER_DELETING) { + spin_unlock_irqrestore(&scsi_nl_lock, flags); + err = -ESHUTDOWN; + goto rcv_exit; + } + + driver->refcnt++; + spin_unlock_irqrestore(&scsi_nl_lock, flags); + + + /* if successful, scsi_host_lookup takes a shost reference */ + shost = scsi_host_lookup(msg->host_no); + if (!shost) { + err = -ENODEV; + goto driver_exit; + } + + /* is this host owned by the vendor ? */ + if (shost->hostt != driver->hostt) { + err = -EINVAL; + goto vendormsg_put; + } + + /* pass message on to the driver */ + err = driver->dmsg_handler(shost, (void *)&msg[1], + msg->vmsg_datalen, pid); + +vendormsg_put: + /* release reference by scsi_host_lookup */ + scsi_host_put(shost); + +driver_exit: + /* release our own reference on the registration object */ + spin_lock_irqsave(&scsi_nl_lock, flags); + driver->refcnt--; + spin_unlock_irqrestore(&scsi_nl_lock, flags); + break; + } + + default: + err = -EBADR; + break; + } + +rcv_exit: + if (err) + printk(KERN_WARNING "%s: Msgtype %d failed - err %d\n", + __func__, snlh->msgtype, err); + return err; +} + + +/** + * scsi_nl_add_transport - + * Registers message and event handlers for a transport. Enables + * receipt of netlink messages and events to a transport. + * + * @tport: transport registering handlers + * @msg_handler: receive message handler callback + * @event_handler: receive event handler callback + **/ +int +scsi_nl_add_transport(u8 tport, + int (*msg_handler)(struct sk_buff *), + void (*event_handler)(struct notifier_block *, unsigned long, void *)) +{ + unsigned long flags; + int err = 0; + + if (tport >= SCSI_NL_MAX_TRANSPORTS) + return -EINVAL; + + spin_lock_irqsave(&scsi_nl_lock, flags); + + if (scsi_nl_state & STATE_EHANDLER_BSY) { + spin_unlock_irqrestore(&scsi_nl_lock, flags); + msleep(1); + spin_lock_irqsave(&scsi_nl_lock, flags); + } + + if (transports[tport].msg_handler || transports[tport].event_handler) { + err = -EALREADY; + goto register_out; + } + + transports[tport].msg_handler = msg_handler; + transports[tport].event_handler = event_handler; + transports[tport].flags = 0; + transports[tport].refcnt = 0; + +register_out: + spin_unlock_irqrestore(&scsi_nl_lock, flags); + + return err; +} +EXPORT_SYMBOL_GPL(scsi_nl_add_transport); + + +/** + * scsi_nl_remove_transport - + * Disable transport receiption of messages and events + * + * @tport: transport deregistering handlers + * + **/ +void +scsi_nl_remove_transport(u8 tport) +{ + unsigned long flags; + + spin_lock_irqsave(&scsi_nl_lock, flags); + if (scsi_nl_state & STATE_EHANDLER_BSY) { + spin_unlock_irqrestore(&scsi_nl_lock, flags); + msleep(1); + spin_lock_irqsave(&scsi_nl_lock, flags); + } + + if (tport < SCSI_NL_MAX_TRANSPORTS) { + transports[tport].flags |= HANDLER_DELETING; + + while (transports[tport].refcnt != 0) { + spin_unlock_irqrestore(&scsi_nl_lock, flags); + schedule_timeout_uninterruptible(HZ/4); + spin_lock_irqsave(&scsi_nl_lock, flags); + } + transports[tport].msg_handler = NULL; + transports[tport].event_handler = NULL; + transports[tport].flags = 0; + } + + spin_unlock_irqrestore(&scsi_nl_lock, flags); + + return; +} +EXPORT_SYMBOL_GPL(scsi_nl_remove_transport); + + +/** + * scsi_nl_add_driver - + * A driver is registering its interfaces for SCSI netlink messages + * + * @vendor_id: A unique identification value for the driver. + * @hostt: address of the driver's host template. Used + * to verify an shost is bound to the driver + * @nlmsg_handler: receive message handler callback + * @nlevt_handler: receive event handler callback + * + * Returns: + * 0 on Success + * error result otherwise + **/ +int +scsi_nl_add_driver(u64 vendor_id, struct scsi_host_template *hostt, + int (*nlmsg_handler)(struct Scsi_Host *shost, void *payload, + u32 len, u32 pid), + void (*nlevt_handler)(struct notifier_block *nb, + unsigned long event, void *notify_ptr)) +{ + struct scsi_nl_drvr *driver; + unsigned long flags; + + driver = kzalloc(sizeof(*driver), GFP_KERNEL); + if (unlikely(!driver)) { + printk(KERN_ERR "%s: allocation failure\n", __func__); + return -ENOMEM; + } + + driver->dmsg_handler = nlmsg_handler; + driver->devt_handler = nlevt_handler; + driver->hostt = hostt; + driver->vendor_id = vendor_id; + + spin_lock_irqsave(&scsi_nl_lock, flags); + if (scsi_nl_state & STATE_EHANDLER_BSY) { + spin_unlock_irqrestore(&scsi_nl_lock, flags); + msleep(1); + spin_lock_irqsave(&scsi_nl_lock, flags); + } + list_add_tail(&driver->next, &scsi_nl_drivers); + spin_unlock_irqrestore(&scsi_nl_lock, flags); + + return 0; +} +EXPORT_SYMBOL_GPL(scsi_nl_add_driver); + + +/** + * scsi_nl_remove_driver - + * An driver is unregistering with the SCSI netlink messages + * + * @vendor_id: The unique identification value for the driver. + **/ +void +scsi_nl_remove_driver(u64 vendor_id) +{ + struct scsi_nl_drvr *driver; + unsigned long flags; + + spin_lock_irqsave(&scsi_nl_lock, flags); + if (scsi_nl_state & STATE_EHANDLER_BSY) { + spin_unlock_irqrestore(&scsi_nl_lock, flags); + msleep(1); + spin_lock_irqsave(&scsi_nl_lock, flags); + } + + list_for_each_entry(driver, &scsi_nl_drivers, next) { + if (driver->vendor_id == vendor_id) { + driver->flags |= HANDLER_DELETING; + while (driver->refcnt != 0) { + spin_unlock_irqrestore(&scsi_nl_lock, flags); + schedule_timeout_uninterruptible(HZ/4); + spin_lock_irqsave(&scsi_nl_lock, flags); + } + list_del(&driver->next); + kfree(driver); + spin_unlock_irqrestore(&scsi_nl_lock, flags); + return; + } + } + + spin_unlock_irqrestore(&scsi_nl_lock, flags); + + printk(KERN_ERR "%s: removal of driver failed - vendor_id 0x%llx\n", + __func__, (unsigned long long)vendor_id); + return; +} +EXPORT_SYMBOL_GPL(scsi_nl_remove_driver); + + +/** + * scsi_netlink_init - Called by SCSI subsystem to intialize + * the SCSI transport netlink interface * **/ void @@ -136,6 +488,8 @@ scsi_netlink_init(void) { int error; + INIT_LIST_HEAD(&scsi_nl_drivers); + error = netlink_register_notifier(&scsi_netlink_notifier); if (error) { printk(KERN_ERR "%s: register of event handler failed - %d\n", @@ -150,8 +504,15 @@ scsi_netlink_init(void) printk(KERN_ERR "%s: register of recieve handler failed\n", __func__); netlink_unregister_notifier(&scsi_netlink_notifier); + return; } + /* Register the entry points for the generic SCSI transport */ + error = scsi_nl_add_transport(SCSI_NL_TRANSPORT, + scsi_generic_msg_handler, NULL); + if (error) + printk(KERN_ERR "%s: register of GENERIC transport handler" + " failed - %d\n", __func__, error); return; } @@ -163,6 +524,8 @@ scsi_netlink_init(void) void scsi_netlink_exit(void) { + scsi_nl_remove_transport(SCSI_NL_TRANSPORT); + if (scsi_nl_sock) { netlink_kernel_release(scsi_nl_sock); netlink_unregister_notifier(&scsi_netlink_notifier); @@ -172,3 +535,147 @@ scsi_netlink_exit(void) } +/* + * Exported Interfaces + */ + +/** + * scsi_nl_send_transport_msg - + * Generic function to send a single message from a SCSI transport to + * a single process + * + * @pid: receiving pid + * @hdr: message payload + * + **/ +void +scsi_nl_send_transport_msg(u32 pid, struct scsi_nl_hdr *hdr) +{ + struct sk_buff *skb; + struct nlmsghdr *nlh; + const char *fn; + char *datab; + u32 len, skblen; + int err; + + if (!scsi_nl_sock) { + err = -ENOENT; + fn = "netlink socket"; + goto msg_fail; + } + + len = NLMSG_SPACE(hdr->msglen); + skblen = NLMSG_SPACE(len); + + skb = alloc_skb(skblen, GFP_KERNEL); + if (!skb) { + err = -ENOBUFS; + fn = "alloc_skb"; + goto msg_fail; + } + + nlh = nlmsg_put(skb, pid, 0, SCSI_TRANSPORT_MSG, len - sizeof(*nlh), 0); + if (!nlh) { + err = -ENOBUFS; + fn = "nlmsg_put"; + goto msg_fail_skb; + } + datab = NLMSG_DATA(nlh); + memcpy(datab, hdr, hdr->msglen); + + err = nlmsg_unicast(scsi_nl_sock, skb, pid); + if (err < 0) { + fn = "nlmsg_unicast"; + /* nlmsg_unicast already kfree_skb'd */ + goto msg_fail; + } + + return; + +msg_fail_skb: + kfree_skb(skb); +msg_fail: + printk(KERN_WARNING + "%s: Dropped Message : pid %d Transport %d, msgtype x%x, " + "msglen %d: %s : err %d\n", + __func__, pid, hdr->transport, hdr->msgtype, hdr->msglen, + fn, err); + return; +} +EXPORT_SYMBOL_GPL(scsi_nl_send_transport_msg); + + +/** + * scsi_nl_send_vendor_msg - called to send a shost vendor unique message + * to a specific process id. + * + * @pid: process id of the receiver + * @host_no: host # sending the message + * @vendor_id: unique identifier for the driver's vendor + * @data_len: amount, in bytes, of vendor unique payload data + * @data_buf: pointer to vendor unique data buffer + * + * Returns: + * 0 on succesful return + * otherwise, failing error code + * + * Notes: + * This routine assumes no locks are held on entry. + */ +int +scsi_nl_send_vendor_msg(u32 pid, unsigned short host_no, u64 vendor_id, + char *data_buf, u32 data_len) +{ + struct sk_buff *skb; + struct nlmsghdr *nlh; + struct scsi_nl_host_vendor_msg *msg; + u32 len, skblen; + int err; + + if (!scsi_nl_sock) { + err = -ENOENT; + goto send_vendor_fail; + } + + len = SCSI_NL_MSGALIGN(sizeof(*msg) + data_len); + skblen = NLMSG_SPACE(len); + + skb = alloc_skb(skblen, GFP_KERNEL); + if (!skb) { + err = -ENOBUFS; + goto send_vendor_fail; + } + + nlh = nlmsg_put(skb, 0, 0, SCSI_TRANSPORT_MSG, + skblen - sizeof(*nlh), 0); + if (!nlh) { + err = -ENOBUFS; + goto send_vendor_fail_skb; + } + msg = NLMSG_DATA(nlh); + + INIT_SCSI_NL_HDR(&msg->snlh, SCSI_NL_TRANSPORT, + SCSI_NL_SHOST_VENDOR, len); + msg->vendor_id = vendor_id; + msg->host_no = host_no; + msg->vmsg_datalen = data_len; /* bytes */ + memcpy(&msg[1], data_buf, data_len); + + err = nlmsg_unicast(scsi_nl_sock, skb, pid); + if (err) + /* nlmsg_multicast already kfree_skb'd */ + goto send_vendor_fail; + + return 0; + +send_vendor_fail_skb: + kfree_skb(skb); +send_vendor_fail: + printk(KERN_WARNING + "%s: Dropped SCSI Msg : host %d vendor_unique - err %d\n", + __func__, host_no, err); + return err; +} +EXPORT_SYMBOL(scsi_nl_send_vendor_msg); + + diff --git a/drivers/scsi/scsi_priv.h b/drivers/scsi/scsi_priv.h index 79f0f751120..e1850904ff7 100644 --- a/drivers/scsi/scsi_priv.h +++ b/drivers/scsi/scsi_priv.h @@ -4,6 +4,7 @@ #include <linux/device.h> struct request_queue; +struct request; struct scsi_cmnd; struct scsi_device; struct scsi_host_template; @@ -27,7 +28,6 @@ extern void scsi_exit_hosts(void); extern int scsi_dispatch_cmd(struct scsi_cmnd *cmd); extern int scsi_setup_command_freelist(struct Scsi_Host *shost); extern void scsi_destroy_command_freelist(struct Scsi_Host *shost); -extern void __scsi_done(struct scsi_cmnd *cmd); #ifdef CONFIG_SCSI_LOGGING void scsi_log_send(struct scsi_cmnd *cmd); void scsi_log_completion(struct scsi_cmnd *cmd, int disposition); @@ -49,10 +49,7 @@ extern int __init scsi_init_devinfo(void); extern void scsi_exit_devinfo(void); /* scsi_error.c */ -extern void scsi_add_timer(struct scsi_cmnd *, int, - void (*)(struct scsi_cmnd *)); -extern int scsi_delete_timer(struct scsi_cmnd *); -extern void scsi_times_out(struct scsi_cmnd *cmd); +extern enum blk_eh_timer_return scsi_times_out(struct request *req); extern int scsi_error_handler(void *host); extern int scsi_decide_disposition(struct scsi_cmnd *cmd); extern void scsi_eh_wakeup(struct Scsi_Host *shost); @@ -62,6 +59,7 @@ void scsi_eh_ready_devs(struct Scsi_Host *shost, struct list_head *done_q); int scsi_eh_get_sense(struct list_head *work_q, struct list_head *done_q); +int scsi_noretry_cmd(struct scsi_cmnd *scmd); /* scsi_lib.c */ extern int scsi_maybe_unblock_host(struct scsi_device *sdev); diff --git a/drivers/scsi/scsi_proc.c b/drivers/scsi/scsi_proc.c index c6a904a45bf..82f7b2dd08a 100644 --- a/drivers/scsi/scsi_proc.c +++ b/drivers/scsi/scsi_proc.c @@ -259,8 +259,8 @@ static int scsi_add_single_device(uint host, uint channel, uint id, uint lun) int error = -ENXIO; shost = scsi_host_lookup(host); - if (IS_ERR(shost)) - return PTR_ERR(shost); + if (!shost) + return error; if (shost->transportt->user_scan) error = shost->transportt->user_scan(shost, channel, id, lun); @@ -287,8 +287,8 @@ static int scsi_remove_single_device(uint host, uint channel, uint id, uint lun) int error = -ENXIO; shost = scsi_host_lookup(host); - if (IS_ERR(shost)) - return PTR_ERR(shost); + if (!shost) + return error; sdev = scsi_device_lookup(shost, channel, id, lun); if (sdev) { scsi_remove_device(sdev); diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index 84b4879cff1..b14dc02c3de 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -419,6 +419,7 @@ static struct scsi_target *scsi_alloc_target(struct device *parent, dev->type = &scsi_target_type; starget->id = id; starget->channel = channel; + starget->can_queue = 0; INIT_LIST_HEAD(&starget->siblings); INIT_LIST_HEAD(&starget->devices); starget->state = STARGET_CREATED; @@ -730,6 +731,8 @@ static int scsi_probe_lun(struct scsi_device *sdev, unsigned char *inq_result, static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result, int *bflags, int async) { + int ret; + /* * XXX do not save the inquiry, since it can change underneath us, * save just vendor/model/rev. @@ -885,7 +888,17 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result, /* set the device running here so that slave configure * may do I/O */ - scsi_device_set_state(sdev, SDEV_RUNNING); + ret = scsi_device_set_state(sdev, SDEV_RUNNING); + if (ret) { + ret = scsi_device_set_state(sdev, SDEV_BLOCK); + + if (ret) { + sdev_printk(KERN_ERR, sdev, + "in wrong state %s to complete scan\n", + scsi_device_state_name(sdev->sdev_state)); + return SCSI_SCAN_NO_RESPONSE; + } + } if (*bflags & BLIST_MS_192_BYTES_FOR_3F) sdev->use_192_bytes_for_3f = 1; @@ -899,7 +912,7 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result, transport_configure_device(&sdev->sdev_gendev); if (sdev->host->hostt->slave_configure) { - int ret = sdev->host->hostt->slave_configure(sdev); + ret = sdev->host->hostt->slave_configure(sdev); if (ret) { /* * if LLDD reports slave not present, don't clutter @@ -994,7 +1007,7 @@ static int scsi_probe_and_add_lun(struct scsi_target *starget, */ sdev = scsi_device_lookup_by_target(starget, lun); if (sdev) { - if (rescan || sdev->sdev_state != SDEV_CREATED) { + if (rescan || !scsi_device_created(sdev)) { SCSI_LOG_SCAN_BUS(3, printk(KERN_INFO "scsi scan: device exists on %s\n", sdev->sdev_gendev.bus_id)); @@ -1080,7 +1093,8 @@ static int scsi_probe_and_add_lun(struct scsi_target *starget, * PDT=1Fh none (no FDD connected to the requested logical unit) */ if (((result[0] >> 5) == 1 || starget->pdt_1f_for_no_lun) && - (result[0] & 0x1f) == 0x1f) { + (result[0] & 0x1f) == 0x1f && + !scsi_is_wlun(lun)) { SCSI_LOG_SCAN_BUS(3, printk(KERN_INFO "scsi scan: peripheral device type" " of 31, no device added\n")); @@ -1466,7 +1480,7 @@ static int scsi_report_lun_scan(struct scsi_target *starget, int bflags, kfree(lun_data); out: scsi_device_put(sdev); - if (sdev->sdev_state == SDEV_CREATED) + if (scsi_device_created(sdev)) /* * the sdev we used didn't appear in the report luns scan */ diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c index ab3c71869be..93c28f30bbd 100644 --- a/drivers/scsi/scsi_sysfs.c +++ b/drivers/scsi/scsi_sysfs.c @@ -34,6 +34,7 @@ static const struct { { SDEV_QUIESCE, "quiesce" }, { SDEV_OFFLINE, "offline" }, { SDEV_BLOCK, "blocked" }, + { SDEV_CREATED_BLOCK, "created-blocked" }, }; const char *scsi_device_state_name(enum scsi_device_state state) @@ -560,12 +561,15 @@ sdev_rd_attr (vendor, "%.8s\n"); sdev_rd_attr (model, "%.16s\n"); sdev_rd_attr (rev, "%.4s\n"); +/* + * TODO: can we make these symlinks to the block layer ones? + */ static ssize_t sdev_show_timeout (struct device *dev, struct device_attribute *attr, char *buf) { struct scsi_device *sdev; sdev = to_scsi_device(dev); - return snprintf (buf, 20, "%d\n", sdev->timeout / HZ); + return snprintf(buf, 20, "%d\n", sdev->request_queue->rq_timeout / HZ); } static ssize_t @@ -576,7 +580,7 @@ sdev_store_timeout (struct device *dev, struct device_attribute *attr, int timeout; sdev = to_scsi_device(dev); sscanf (buf, "%d\n", &timeout); - sdev->timeout = timeout * HZ; + blk_queue_rq_timeout(sdev->request_queue, timeout * HZ); return count; } static DEVICE_ATTR(timeout, S_IRUGO | S_IWUSR, sdev_show_timeout, sdev_store_timeout); diff --git a/drivers/scsi/scsi_tgt_lib.c b/drivers/scsi/scsi_tgt_lib.c index 257e097c39a..48ba413f7f6 100644 --- a/drivers/scsi/scsi_tgt_lib.c +++ b/drivers/scsi/scsi_tgt_lib.c @@ -362,7 +362,7 @@ static int scsi_map_user_pages(struct scsi_tgt_cmd *tcmd, struct scsi_cmnd *cmd, int err; dprintk("%lx %u\n", uaddr, len); - err = blk_rq_map_user(q, rq, (void *)uaddr, len); + err = blk_rq_map_user(q, rq, NULL, (void *)uaddr, len, GFP_KERNEL); if (err) { /* * TODO: need to fixup sg_tablesize, max_segment_size, @@ -460,7 +460,7 @@ int scsi_tgt_kspace_exec(int host_no, u64 itn_id, int result, u64 tag, /* TODO: replace with a O(1) alg */ shost = scsi_host_lookup(host_no); - if (IS_ERR(shost)) { + if (!shost) { printk(KERN_ERR "Could not find host no %d\n", host_no); return -EINVAL; } @@ -550,7 +550,7 @@ int scsi_tgt_kspace_tsk_mgmt(int host_no, u64 itn_id, u64 mid, int result) dprintk("%d %d %llx\n", host_no, result, (unsigned long long) mid); shost = scsi_host_lookup(host_no); - if (IS_ERR(shost)) { + if (!shost) { printk(KERN_ERR "Could not find host no %d\n", host_no); return err; } @@ -603,7 +603,7 @@ int scsi_tgt_kspace_it_nexus_rsp(int host_no, u64 itn_id, int result) dprintk("%d %d%llx\n", host_no, result, (unsigned long long)itn_id); shost = scsi_host_lookup(host_no); - if (IS_ERR(shost)) { + if (!shost) { printk(KERN_ERR "Could not find host no %d\n", host_no); return err; } diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c index 56823fd1fb8..1e71abf0607 100644 --- a/drivers/scsi/scsi_transport_fc.c +++ b/drivers/scsi/scsi_transport_fc.c @@ -40,31 +40,7 @@ static int fc_queue_work(struct Scsi_Host *, struct work_struct *); static void fc_vport_sched_delete(struct work_struct *work); - -/* - * This is a temporary carrier for creating a vport. It will eventually - * be replaced by a real message definition for sgio or netlink. - * - * fc_vport_identifiers: This set of data contains all elements - * to uniquely identify and instantiate a FC virtual port. - * - * Notes: - * symbolic_name: The driver is to append the symbolic_name string data - * to the symbolic_node_name data that it generates by default. - * the resulting combination should then be registered with the switch. - * It is expected that things like Xen may stuff a VM title into - * this field. - */ -struct fc_vport_identifiers { - u64 node_name; - u64 port_name; - u32 roles; - bool disable; - enum fc_port_type vport_type; /* only FC_PORTTYPE_NPIV allowed */ - char symbolic_name[FC_VPORT_SYMBOLIC_NAMELEN]; -}; - -static int fc_vport_create(struct Scsi_Host *shost, int channel, +static int fc_vport_setup(struct Scsi_Host *shost, int channel, struct device *pdev, struct fc_vport_identifiers *ids, struct fc_vport **vport); @@ -1760,7 +1736,7 @@ store_fc_host_vport_create(struct device *dev, struct device_attribute *attr, vid.disable = false; /* always enabled */ /* we only allow support on Channel 0 !!! */ - stat = fc_vport_create(shost, 0, &shost->shost_gendev, &vid, &vport); + stat = fc_vport_setup(shost, 0, &shost->shost_gendev, &vid, &vport); return stat ? stat : count; } static FC_DEVICE_ATTR(host, vport_create, S_IWUSR, NULL, @@ -1950,15 +1926,15 @@ static int fc_vport_match(struct attribute_container *cont, * Notes: * This routine assumes no locks are held on entry. */ -static enum scsi_eh_timer_return +static enum blk_eh_timer_return fc_timed_out(struct scsi_cmnd *scmd) { struct fc_rport *rport = starget_to_rport(scsi_target(scmd->device)); if (rport->port_state == FC_PORTSTATE_BLOCKED) - return EH_RESET_TIMER; + return BLK_EH_RESET_TIMER; - return EH_NOT_HANDLED; + return BLK_EH_NOT_HANDLED; } /* @@ -2157,8 +2133,7 @@ fc_attach_transport(struct fc_function_template *ft) SETUP_PRIVATE_RPORT_ATTRIBUTE_RD(roles); SETUP_PRIVATE_RPORT_ATTRIBUTE_RD(port_state); SETUP_PRIVATE_RPORT_ATTRIBUTE_RD(scsi_target_id); - if (ft->terminate_rport_io) - SETUP_PRIVATE_RPORT_ATTRIBUTE_RW(fast_io_fail_tmo); + SETUP_PRIVATE_RPORT_ATTRIBUTE_RW(fast_io_fail_tmo); BUG_ON(count > FC_RPORT_NUM_ATTRS); @@ -2352,6 +2327,22 @@ fc_remove_host(struct Scsi_Host *shost) } EXPORT_SYMBOL(fc_remove_host); +static void fc_terminate_rport_io(struct fc_rport *rport) +{ + struct Scsi_Host *shost = rport_to_shost(rport); + struct fc_internal *i = to_fc_internal(shost->transportt); + + /* Involve the LLDD if possible to terminate all io on the rport. */ + if (i->f->terminate_rport_io) + i->f->terminate_rport_io(rport); + + /* + * must unblock to flush queued IO. The caller will have set + * the port_state or flags, so that fc_remote_port_chkready will + * fail IO. + */ + scsi_target_unblock(&rport->dev); +} /** * fc_starget_delete - called to delete the scsi decendents of an rport @@ -2364,13 +2355,8 @@ fc_starget_delete(struct work_struct *work) { struct fc_rport *rport = container_of(work, struct fc_rport, stgt_delete_work); - struct Scsi_Host *shost = rport_to_shost(rport); - struct fc_internal *i = to_fc_internal(shost->transportt); - - /* Involve the LLDD if possible to terminate all io on the rport. */ - if (i->f->terminate_rport_io) - i->f->terminate_rport_io(rport); + fc_terminate_rport_io(rport); scsi_remove_target(&rport->dev); } @@ -2396,10 +2382,7 @@ fc_rport_final_delete(struct work_struct *work) if (rport->flags & FC_RPORT_SCAN_PENDING) scsi_flush_work(shost); - /* involve the LLDD to terminate all pending i/o */ - if (i->f->terminate_rport_io) - i->f->terminate_rport_io(rport); - + fc_terminate_rport_io(rport); /* * Cancel any outstanding timers. These should really exist * only when rmmod'ing the LLDD and we're asking for @@ -2663,7 +2646,8 @@ fc_remote_port_add(struct Scsi_Host *shost, int channel, spin_lock_irqsave(shost->host_lock, flags); - rport->flags &= ~FC_RPORT_DEVLOSS_PENDING; + rport->flags &= ~(FC_RPORT_FAST_FAIL_TIMEDOUT | + FC_RPORT_DEVLOSS_PENDING); /* if target, initiate a scan */ if (rport->scsi_target_id != -1) { @@ -2726,6 +2710,7 @@ fc_remote_port_add(struct Scsi_Host *shost, int channel, rport->port_id = ids->port_id; rport->roles = ids->roles; rport->port_state = FC_PORTSTATE_ONLINE; + rport->flags &= ~FC_RPORT_FAST_FAIL_TIMEDOUT; if (fci->f->dd_fcrport_size) memset(rport->dd_data, 0, @@ -2808,7 +2793,6 @@ void fc_remote_port_delete(struct fc_rport *rport) { struct Scsi_Host *shost = rport_to_shost(rport); - struct fc_internal *i = to_fc_internal(shost->transportt); int timeout = rport->dev_loss_tmo; unsigned long flags; @@ -2854,7 +2838,7 @@ fc_remote_port_delete(struct fc_rport *rport) /* see if we need to kill io faster than waiting for device loss */ if ((rport->fast_io_fail_tmo != -1) && - (rport->fast_io_fail_tmo < timeout) && (i->f->terminate_rport_io)) + (rport->fast_io_fail_tmo < timeout)) fc_queue_devloss_work(shost, &rport->fail_io_work, rport->fast_io_fail_tmo * HZ); @@ -2930,7 +2914,8 @@ fc_remote_port_rolechg(struct fc_rport *rport, u32 roles) fc_flush_devloss(shost); spin_lock_irqsave(shost->host_lock, flags); - rport->flags &= ~FC_RPORT_DEVLOSS_PENDING; + rport->flags &= ~(FC_RPORT_FAST_FAIL_TIMEDOUT | + FC_RPORT_DEVLOSS_PENDING); spin_unlock_irqrestore(shost->host_lock, flags); /* ensure any stgt delete functions are done */ @@ -3025,6 +3010,7 @@ fc_timeout_deleted_rport(struct work_struct *work) rport->supported_classes = FC_COS_UNSPECIFIED; rport->roles = FC_PORT_ROLE_UNKNOWN; rport->port_state = FC_PORTSTATE_NOTPRESENT; + rport->flags &= ~FC_RPORT_FAST_FAIL_TIMEDOUT; /* remove the identifiers that aren't used in the consisting binding */ switch (fc_host->tgtid_bind_type) { @@ -3067,13 +3053,12 @@ fc_timeout_fail_rport_io(struct work_struct *work) { struct fc_rport *rport = container_of(work, struct fc_rport, fail_io_work.work); - struct Scsi_Host *shost = rport_to_shost(rport); - struct fc_internal *i = to_fc_internal(shost->transportt); if (rport->port_state != FC_PORTSTATE_BLOCKED) return; - i->f->terminate_rport_io(rport); + rport->flags |= FC_RPORT_FAST_FAIL_TIMEDOUT; + fc_terminate_rport_io(rport); } /** @@ -3103,7 +3088,7 @@ fc_scsi_scan_rport(struct work_struct *work) /** - * fc_vport_create - allocates and creates a FC virtual port. + * fc_vport_setup - allocates and creates a FC virtual port. * @shost: scsi host the virtual port is connected to. * @channel: Channel on shost port connected to. * @pdev: parent device for vport @@ -3118,7 +3103,7 @@ fc_scsi_scan_rport(struct work_struct *work) * This routine assumes no locks are held on entry. */ static int -fc_vport_create(struct Scsi_Host *shost, int channel, struct device *pdev, +fc_vport_setup(struct Scsi_Host *shost, int channel, struct device *pdev, struct fc_vport_identifiers *ids, struct fc_vport **ret_vport) { struct fc_host_attrs *fc_host = shost_to_fc_host(shost); @@ -3231,6 +3216,28 @@ delete_vport: return error; } +/** + * fc_vport_create - Admin App or LLDD requests creation of a vport + * @shost: scsi host the virtual port is connected to. + * @channel: channel on shost port connected to. + * @ids: The world wide names, FC4 port roles, etc for + * the virtual port. + * + * Notes: + * This routine assumes no locks are held on entry. + */ +struct fc_vport * +fc_vport_create(struct Scsi_Host *shost, int channel, + struct fc_vport_identifiers *ids) +{ + int stat; + struct fc_vport *vport; + + stat = fc_vport_setup(shost, channel, &shost->shost_gendev, + ids, &vport); + return stat ? NULL : vport; +} +EXPORT_SYMBOL(fc_vport_create); /** * fc_vport_terminate - Admin App or LLDD requests termination of a vport diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c index 043c3921164..4a803ebaf50 100644 --- a/drivers/scsi/scsi_transport_iscsi.c +++ b/drivers/scsi/scsi_transport_iscsi.c @@ -138,7 +138,7 @@ static ssize_t show_ep_handle(struct device *dev, struct device_attribute *attr, char *buf) { struct iscsi_endpoint *ep = iscsi_dev_to_endpoint(dev); - return sprintf(buf, "%u\n", ep->id); + return sprintf(buf, "%llu\n", (unsigned long long) ep->id); } static ISCSI_ATTR(ep, handle, S_IRUGO, show_ep_handle, NULL); @@ -156,7 +156,7 @@ static struct attribute_group iscsi_endpoint_group = { static int iscsi_match_epid(struct device *dev, void *data) { struct iscsi_endpoint *ep = iscsi_dev_to_endpoint(dev); - unsigned int *epid = (unsigned int *) data; + uint64_t *epid = (uint64_t *) data; return *epid == ep->id; } @@ -166,7 +166,7 @@ iscsi_create_endpoint(int dd_size) { struct device *dev; struct iscsi_endpoint *ep; - unsigned int id; + uint64_t id; int err; for (id = 1; id < ISCSI_MAX_EPID; id++) { @@ -187,7 +187,8 @@ iscsi_create_endpoint(int dd_size) ep->id = id; ep->dev.class = &iscsi_endpoint_class; - snprintf(ep->dev.bus_id, BUS_ID_SIZE, "ep-%u", id); + snprintf(ep->dev.bus_id, BUS_ID_SIZE, "ep-%llu", + (unsigned long long) id); err = device_register(&ep->dev); if (err) goto free_ep; @@ -374,10 +375,10 @@ int iscsi_session_chkready(struct iscsi_cls_session *session) err = 0; break; case ISCSI_SESSION_FAILED: - err = DID_IMM_RETRY << 16; + err = DID_TRANSPORT_DISRUPTED << 16; break; case ISCSI_SESSION_FREE: - err = DID_NO_CONNECT << 16; + err = DID_TRANSPORT_FAILFAST << 16; break; default: err = DID_NO_CONNECT << 16; @@ -1010,7 +1011,7 @@ int iscsi_recv_pdu(struct iscsi_cls_conn *conn, struct iscsi_hdr *hdr, skb = alloc_skb(len, GFP_ATOMIC); if (!skb) { - iscsi_conn_error(conn, ISCSI_ERR_CONN_FAILED); + iscsi_conn_error_event(conn, ISCSI_ERR_CONN_FAILED); iscsi_cls_conn_printk(KERN_ERR, conn, "can not deliver " "control PDU: OOM\n"); return -ENOMEM; @@ -1031,7 +1032,7 @@ int iscsi_recv_pdu(struct iscsi_cls_conn *conn, struct iscsi_hdr *hdr, } EXPORT_SYMBOL_GPL(iscsi_recv_pdu); -void iscsi_conn_error(struct iscsi_cls_conn *conn, enum iscsi_err error) +void iscsi_conn_error_event(struct iscsi_cls_conn *conn, enum iscsi_err error) { struct nlmsghdr *nlh; struct sk_buff *skb; @@ -1063,7 +1064,7 @@ void iscsi_conn_error(struct iscsi_cls_conn *conn, enum iscsi_err error) iscsi_cls_conn_printk(KERN_INFO, conn, "detected conn error (%d)\n", error); } -EXPORT_SYMBOL_GPL(iscsi_conn_error); +EXPORT_SYMBOL_GPL(iscsi_conn_error_event); static int iscsi_if_send_reply(int pid, int seq, int type, int done, int multi, @@ -1361,7 +1362,7 @@ iscsi_tgt_dscvr(struct iscsi_transport *transport, return -EINVAL; shost = scsi_host_lookup(ev->u.tgt_dscvr.host_no); - if (IS_ERR(shost)) { + if (!shost) { printk(KERN_ERR "target discovery could not find host no %u\n", ev->u.tgt_dscvr.host_no); return -ENODEV; @@ -1387,7 +1388,7 @@ iscsi_set_host_param(struct iscsi_transport *transport, return -ENOSYS; shost = scsi_host_lookup(ev->u.set_host_param.host_no); - if (IS_ERR(shost)) { + if (!shost) { printk(KERN_ERR "set_host_param could not find host no %u\n", ev->u.set_host_param.host_no); return -ENODEV; diff --git a/drivers/scsi/scsi_transport_spi.c b/drivers/scsi/scsi_transport_spi.c index b29360ed0bd..7c2d28924d2 100644 --- a/drivers/scsi/scsi_transport_spi.c +++ b/drivers/scsi/scsi_transport_spi.c @@ -109,7 +109,9 @@ static int spi_execute(struct scsi_device *sdev, const void *cmd, for(i = 0; i < DV_RETRIES; i++) { result = scsi_execute(sdev, cmd, dir, buffer, bufflen, sense, DV_TIMEOUT, /* retries */ 1, - REQ_FAILFAST); + REQ_FAILFAST_DEV | + REQ_FAILFAST_TRANSPORT | + REQ_FAILFAST_DRIVER); if (result & DRIVER_SENSE) { struct scsi_sense_hdr sshdr_tmp; if (!sshdr) diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index e5e7d785645..7c4d2e68df1 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -47,6 +47,7 @@ #include <linux/blkpg.h> #include <linux/delay.h> #include <linux/mutex.h> +#include <linux/string_helpers.h> #include <asm/uaccess.h> #include <scsi/scsi.h> @@ -86,6 +87,12 @@ MODULE_ALIAS_SCSI_DEVICE(TYPE_DISK); MODULE_ALIAS_SCSI_DEVICE(TYPE_MOD); MODULE_ALIAS_SCSI_DEVICE(TYPE_RBC); +#if !defined(CONFIG_DEBUG_BLOCK_EXT_DEVT) +#define SD_MINORS 16 +#else +#define SD_MINORS 0 +#endif + static int sd_revalidate_disk(struct gendisk *); static int sd_probe(struct device *); static int sd_remove(struct device *); @@ -159,7 +166,7 @@ sd_store_cache_type(struct device *dev, struct device_attribute *attr, sd_print_sense_hdr(sdkp, &sshdr); return -EINVAL; } - sd_revalidate_disk(sdkp->disk); + revalidate_disk(sdkp->disk); return count; } @@ -377,8 +384,7 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq) sector_t block = rq->sector; sector_t threshold; unsigned int this_count = rq->nr_sectors; - unsigned int timeout = sdp->timeout; - int ret; + int ret, host_dif; if (rq->cmd_type == REQ_TYPE_BLOCK_PC) { ret = scsi_setup_blk_pc_cmnd(sdp, rq); @@ -509,7 +515,8 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq) rq->nr_sectors)); /* Set RDPROTECT/WRPROTECT if disk is formatted with DIF */ - if (scsi_host_dif_capable(sdp->host, sdkp->protection_type)) + host_dif = scsi_host_dif_capable(sdp->host, sdkp->protection_type); + if (host_dif) SCpnt->cmnd[1] = 1 << 5; else SCpnt->cmnd[1] = 0; @@ -567,8 +574,9 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq) SCpnt->sdb.length = this_count * sdp->sector_size; /* If DIF or DIX is enabled, tell HBA how to handle request */ - if (sdkp->protection_type || scsi_prot_sg_count(SCpnt)) - sd_dif_op(SCpnt, sdkp->protection_type, scsi_prot_sg_count(SCpnt)); + if (host_dif || scsi_prot_sg_count(SCpnt)) + sd_dif_op(SCpnt, host_dif, scsi_prot_sg_count(SCpnt), + sdkp->protection_type); /* * We shouldn't disconnect in the middle of a sector, so with a dumb @@ -578,7 +586,6 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq) SCpnt->transfersize = sdp->sector_size; SCpnt->underflow = this_count << 9; SCpnt->allowed = SD_MAX_RETRIES; - SCpnt->timeout_per_command = timeout; /* * This indicates that the command is ready from our end to be @@ -910,7 +917,7 @@ static void sd_rescan(struct device *dev) struct scsi_disk *sdkp = scsi_disk_get_from_dev(dev); if (sdkp) { - sd_revalidate_disk(sdkp->disk); + revalidate_disk(sdkp->disk); scsi_disk_put(sdkp); } } @@ -1247,14 +1254,12 @@ void sd_read_protection_type(struct scsi_disk *sdkp, unsigned char *buffer) else type = ((buffer[12] >> 1) & 7) + 1; /* P_TYPE 0 = Type 1 */ + sdkp->protection_type = type; + switch (type) { case SD_DIF_TYPE0_PROTECTION: - sdkp->protection_type = 0; - break; - case SD_DIF_TYPE1_PROTECTION: case SD_DIF_TYPE3_PROTECTION: - sdkp->protection_type = type; break; case SD_DIF_TYPE2_PROTECTION: @@ -1272,7 +1277,6 @@ void sd_read_protection_type(struct scsi_disk *sdkp, unsigned char *buffer) return; disable: - sdkp->protection_type = 0; sdkp->capacity = 0; } @@ -1429,27 +1433,21 @@ got_data: */ sector_size = 512; } + blk_queue_hardsect_size(sdp->request_queue, sector_size); + { - /* - * The msdos fs needs to know the hardware sector size - * So I have created this table. See ll_rw_blk.c - * Jacques Gelinas (Jacques@solucorp.qc.ca) - */ - int hard_sector = sector_size; - sector_t sz = (sdkp->capacity/2) * (hard_sector/256); - struct request_queue *queue = sdp->request_queue; - sector_t mb = sz; + char cap_str_2[10], cap_str_10[10]; + u64 sz = sdkp->capacity << ffz(~sector_size); - blk_queue_hardsect_size(queue, hard_sector); - /* avoid 64-bit division on 32-bit platforms */ - sector_div(sz, 625); - mb -= sz - 974; - sector_div(mb, 1950); + string_get_size(sz, STRING_UNITS_2, cap_str_2, + sizeof(cap_str_2)); + string_get_size(sz, STRING_UNITS_10, cap_str_10, + sizeof(cap_str_10)); sd_printk(KERN_NOTICE, sdkp, - "%llu %d-byte hardware sectors (%llu MB)\n", + "%llu %d-byte hardware sectors: (%s/%s)\n", (unsigned long long)sdkp->capacity, - hard_sector, (unsigned long long)mb); + sector_size, cap_str_10, cap_str_2); } /* Rescale capacity to 512-byte units */ @@ -1764,6 +1762,52 @@ static int sd_revalidate_disk(struct gendisk *disk) } /** + * sd_format_disk_name - format disk name + * @prefix: name prefix - ie. "sd" for SCSI disks + * @index: index of the disk to format name for + * @buf: output buffer + * @buflen: length of the output buffer + * + * SCSI disk names starts at sda. The 26th device is sdz and the + * 27th is sdaa. The last one for two lettered suffix is sdzz + * which is followed by sdaaa. + * + * This is basically 26 base counting with one extra 'nil' entry + * at the beggining from the second digit on and can be + * determined using similar method as 26 base conversion with the + * index shifted -1 after each digit is computed. + * + * CONTEXT: + * Don't care. + * + * RETURNS: + * 0 on success, -errno on failure. + */ +static int sd_format_disk_name(char *prefix, int index, char *buf, int buflen) +{ + const int base = 'z' - 'a' + 1; + char *begin = buf + strlen(prefix); + char *end = buf + buflen; + char *p; + int unit; + + p = end - 1; + *p = '\0'; + unit = base; + do { + if (p == begin) + return -EINVAL; + *--p = 'a' + (index % unit); + index = (index / unit) - 1; + } while (index >= 0); + + memmove(begin, p, end - p); + memcpy(buf, prefix, strlen(prefix)); + + return 0; +} + +/** * sd_probe - called during driver initialization and whenever a * new scsi device is attached to the system. It is called once * for each scsi device (not just disks) present. @@ -1801,7 +1845,7 @@ static int sd_probe(struct device *dev) if (!sdkp) goto out; - gd = alloc_disk(16); + gd = alloc_disk(SD_MINORS); if (!gd) goto out_free; @@ -1815,8 +1859,8 @@ static int sd_probe(struct device *dev) if (error) goto out_put; - error = -EBUSY; - if (index >= SD_MAX_DISKS) + error = sd_format_disk_name("sd", index, gd->disk_name, DISK_NAME_LEN); + if (error) goto out_free_index; sdkp->device = sdp; @@ -1826,11 +1870,12 @@ static int sd_probe(struct device *dev) sdkp->openers = 0; sdkp->previous_state = 1; - if (!sdp->timeout) { + if (!sdp->request_queue->rq_timeout) { if (sdp->type != TYPE_MOD) - sdp->timeout = SD_TIMEOUT; + blk_queue_rq_timeout(sdp->request_queue, SD_TIMEOUT); else - sdp->timeout = SD_MOD_TIMEOUT; + blk_queue_rq_timeout(sdp->request_queue, + SD_MOD_TIMEOUT); } device_initialize(&sdkp->dev); @@ -1843,24 +1888,12 @@ static int sd_probe(struct device *dev) get_device(&sdp->sdev_gendev); - gd->major = sd_major((index & 0xf0) >> 4); - gd->first_minor = ((index & 0xf) << 4) | (index & 0xfff00); - gd->minors = 16; - gd->fops = &sd_fops; - - if (index < 26) { - sprintf(gd->disk_name, "sd%c", 'a' + index % 26); - } else if (index < (26 + 1) * 26) { - sprintf(gd->disk_name, "sd%c%c", - 'a' + index / 26 - 1,'a' + index % 26); - } else { - const unsigned int m1 = (index / 26 - 1) / 26 - 1; - const unsigned int m2 = (index / 26 - 1) % 26; - const unsigned int m3 = index % 26; - sprintf(gd->disk_name, "sd%c%c%c", - 'a' + m1, 'a' + m2, 'a' + m3); + if (index < SD_MAX_DISKS) { + gd->major = sd_major((index & 0xf0) >> 4); + gd->first_minor = ((index & 0xf) << 4) | (index & 0xfff00); + gd->minors = SD_MINORS; } - + gd->fops = &sd_fops; gd->private_data = &sdkp->driver; gd->queue = sdkp->device->request_queue; @@ -1869,7 +1902,7 @@ static int sd_probe(struct device *dev) blk_queue_prep_rq(sdp->request_queue, sd_prep_fn); gd->driverfs_dev = &sdp->sdev_gendev; - gd->flags = GENHD_FL_DRIVERFS; + gd->flags = GENHD_FL_EXT_DEVT | GENHD_FL_DRIVERFS; if (sdp->removable) gd->flags |= GENHD_FL_REMOVABLE; diff --git a/drivers/scsi/sd.h b/drivers/scsi/sd.h index 95b9f06534d..75638e7d3f6 100644 --- a/drivers/scsi/sd.h +++ b/drivers/scsi/sd.h @@ -97,19 +97,28 @@ struct sd_dif_tuple { __be32 ref_tag; /* Target LBA or indirect LBA */ }; -#if defined(CONFIG_BLK_DEV_INTEGRITY) +#ifdef CONFIG_BLK_DEV_INTEGRITY -extern void sd_dif_op(struct scsi_cmnd *, unsigned int, unsigned int); +extern void sd_dif_op(struct scsi_cmnd *, unsigned int, unsigned int, unsigned int); extern void sd_dif_config_host(struct scsi_disk *); extern int sd_dif_prepare(struct request *rq, sector_t, unsigned int); extern void sd_dif_complete(struct scsi_cmnd *, unsigned int); #else /* CONFIG_BLK_DEV_INTEGRITY */ -#define sd_dif_op(a, b, c) do { } while (0) -#define sd_dif_config_host(a) do { } while (0) -#define sd_dif_prepare(a, b, c) (0) -#define sd_dif_complete(a, b) (0) +static inline void sd_dif_op(struct scsi_cmnd *cmd, unsigned int a, unsigned int b, unsigned int c) +{ +} +static inline void sd_dif_config_host(struct scsi_disk *disk) +{ +} +static inline int sd_dif_prepare(struct request *rq, sector_t s, unsigned int a) +{ + return 0; +} +static inline void sd_dif_complete(struct scsi_cmnd *cmd, unsigned int a) +{ +} #endif /* CONFIG_BLK_DEV_INTEGRITY */ diff --git a/drivers/scsi/sd_dif.c b/drivers/scsi/sd_dif.c index 4d17f3d35aa..3ebb1f28949 100644 --- a/drivers/scsi/sd_dif.c +++ b/drivers/scsi/sd_dif.c @@ -311,25 +311,26 @@ void sd_dif_config_host(struct scsi_disk *sdkp) struct scsi_device *sdp = sdkp->device; struct gendisk *disk = sdkp->disk; u8 type = sdkp->protection_type; + int dif, dix; - /* If this HBA doesn't support DIX, resort to normal I/O or DIF */ - if (scsi_host_dix_capable(sdp->host, type) == 0) { + dif = scsi_host_dif_capable(sdp->host, type); + dix = scsi_host_dix_capable(sdp->host, type); - if (type == SD_DIF_TYPE0_PROTECTION) - return; - - if (scsi_host_dif_capable(sdp->host, type) == 0) { - sd_printk(KERN_INFO, sdkp, "Type %d protection " \ - "unsupported by HBA. Disabling DIF.\n", type); - sdkp->protection_type = 0; - return; - } + if (!dix && scsi_host_dix_capable(sdp->host, 0)) { + dif = 0; dix = 1; + } - sd_printk(KERN_INFO, sdkp, "Enabling DIF Type %d protection\n", - type); + if (type) { + if (dif) + sd_printk(KERN_NOTICE, sdkp, + "Enabling DIF Type %d protection\n", type); + else + sd_printk(KERN_NOTICE, sdkp, + "Disabling DIF Type %d protection\n", type); + } + if (!dix) return; - } /* Enable DMA of protection information */ if (scsi_host_get_guard(sdkp->device->host) & SHOST_DIX_GUARD_IP) @@ -343,17 +344,17 @@ void sd_dif_config_host(struct scsi_disk *sdkp) else blk_integrity_register(disk, &dif_type1_integrity_crc); - sd_printk(KERN_INFO, sdkp, - "Enabling %s integrity protection\n", disk->integrity->name); + sd_printk(KERN_NOTICE, sdkp, + "Enabling DIX %s protection\n", disk->integrity->name); /* Signal to block layer that we support sector tagging */ - if (type && sdkp->ATO) { + if (dif && type && sdkp->ATO) { if (type == SD_DIF_TYPE3_PROTECTION) disk->integrity->tag_size = sizeof(u16) + sizeof(u32); else disk->integrity->tag_size = sizeof(u16); - sd_printk(KERN_INFO, sdkp, "DIF application tag size %u\n", + sd_printk(KERN_NOTICE, sdkp, "DIF application tag size %u\n", disk->integrity->tag_size); } } @@ -361,7 +362,7 @@ void sd_dif_config_host(struct scsi_disk *sdkp) /* * DIF DMA operation magic decoder ring. */ -void sd_dif_op(struct scsi_cmnd *scmd, unsigned int dif, unsigned int dix) +void sd_dif_op(struct scsi_cmnd *scmd, unsigned int dif, unsigned int dix, unsigned int type) { int csum_convert, prot_op; @@ -406,7 +407,8 @@ void sd_dif_op(struct scsi_cmnd *scmd, unsigned int dif, unsigned int dix) } scsi_set_prot_op(scmd, prot_op); - scsi_set_prot_type(scmd, dif); + if (dif) + scsi_set_prot_type(scmd, type); } /* diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index 661f9f21650..93bd59a1ed7 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -47,7 +47,6 @@ static int sg_version_num = 30534; /* 2 digits for each component */ #include <linux/seq_file.h> #include <linux/blkdev.h> #include <linux/delay.h> -#include <linux/scatterlist.h> #include <linux/blktrace_api.h> #include <linux/smp_lock.h> @@ -69,7 +68,6 @@ static void sg_proc_cleanup(void); #endif #define SG_ALLOW_DIO_DEF 0 -#define SG_ALLOW_DIO_CODE /* compile out by commenting this define */ #define SG_MAX_DEVS 32768 @@ -118,8 +116,8 @@ typedef struct sg_scatter_hold { /* holding area for scsi scatter gather info */ unsigned short k_use_sg; /* Count of kernel scatter-gather pieces */ unsigned sglist_len; /* size of malloc'd scatter-gather list ++ */ unsigned bufflen; /* Size of (aggregate) data buffer */ - unsigned b_malloc_len; /* actual len malloc'ed in buffer */ - struct scatterlist *buffer;/* scatter list */ + struct page **pages; + int page_order; char dio_in_use; /* 0->indirect IO (or mmap), 1->dio */ unsigned char cmd_opcode; /* first byte of command */ } Sg_scatter_hold; @@ -137,6 +135,8 @@ typedef struct sg_request { /* SG_MAX_QUEUE requests outstanding per file */ char orphan; /* 1 -> drop on sight, 0 -> normal */ char sg_io_owned; /* 1 -> packet belongs to SG_IO */ volatile char done; /* 0->before bh, 1->before read, 2->read */ + struct request *rq; + struct bio *bio; } Sg_request; typedef struct sg_fd { /* holds the state of a file descriptor */ @@ -175,8 +175,8 @@ typedef struct sg_device { /* holds the state of each scsi generic device */ static int sg_fasync(int fd, struct file *filp, int mode); /* tasklet or soft irq callback */ -static void sg_cmd_done(void *data, char *sense, int result, int resid); -static int sg_start_req(Sg_request * srp); +static void sg_rq_end_io(struct request *rq, int uptodate); +static int sg_start_req(Sg_request *srp, unsigned char *cmd); static void sg_finish_rem_req(Sg_request * srp); static int sg_build_indirect(Sg_scatter_hold * schp, Sg_fd * sfp, int buff_size); static int sg_build_sgat(Sg_scatter_hold * schp, const Sg_fd * sfp, @@ -188,17 +188,11 @@ static ssize_t sg_new_write(Sg_fd *sfp, struct file *file, int read_only, Sg_request **o_srp); static int sg_common_write(Sg_fd * sfp, Sg_request * srp, unsigned char *cmnd, int timeout, int blocking); -static int sg_u_iovec(sg_io_hdr_t * hp, int sg_num, int ind, - int wr_xf, int *countp, unsigned char __user **up); -static int sg_write_xfer(Sg_request * srp); -static int sg_read_xfer(Sg_request * srp); static int sg_read_oxfer(Sg_request * srp, char __user *outp, int num_read_xfer); static void sg_remove_scat(Sg_scatter_hold * schp); static void sg_build_reserve(Sg_fd * sfp, int req_size); static void sg_link_reserve(Sg_fd * sfp, Sg_request * srp, int size); static void sg_unlink_reserve(Sg_fd * sfp, Sg_request * srp); -static struct page *sg_page_malloc(int rqSz, int lowDma, int *retSzp); -static void sg_page_free(struct page *page, int size); static Sg_fd *sg_add_sfp(Sg_device * sdp, int dev); static int sg_remove_sfp(Sg_device * sdp, Sg_fd * sfp); static void __sg_remove_sfp(Sg_device * sdp, Sg_fd * sfp); @@ -206,7 +200,6 @@ static Sg_request *sg_get_rq_mark(Sg_fd * sfp, int pack_id); static Sg_request *sg_add_request(Sg_fd * sfp); static int sg_remove_request(Sg_fd * sfp, Sg_request * srp); static int sg_res_in_use(Sg_fd * sfp); -static int sg_build_direct(Sg_request * srp, Sg_fd * sfp, int dxfer_len); static Sg_device *sg_get_dev(int dev); #ifdef CONFIG_SCSI_PROC_FS static int sg_last_dev(void); @@ -529,8 +522,7 @@ sg_new_read(Sg_fd * sfp, char __user *buf, size_t count, Sg_request * srp) err = -EFAULT; goto err_out; } - err = sg_read_xfer(srp); - err_out: +err_out: sg_finish_rem_req(srp); return (0 == err) ? count : err; } @@ -612,7 +604,10 @@ sg_write(struct file *filp, const char __user *buf, size_t count, loff_t * ppos) else hp->dxfer_direction = (mxsize > 0) ? SG_DXFER_FROM_DEV : SG_DXFER_NONE; hp->dxfer_len = mxsize; - hp->dxferp = (char __user *)buf + cmd_size; + if (hp->dxfer_direction == SG_DXFER_TO_DEV) + hp->dxferp = (char __user *)buf + cmd_size; + else + hp->dxferp = NULL; hp->sbp = NULL; hp->timeout = old_hdr.reply_len; /* structure abuse ... */ hp->flags = input_size; /* structure abuse ... */ @@ -732,16 +727,12 @@ sg_common_write(Sg_fd * sfp, Sg_request * srp, SCSI_LOG_TIMEOUT(4, printk("sg_common_write: scsi opcode=0x%02x, cmd_size=%d\n", (int) cmnd[0], (int) hp->cmd_len)); - if ((k = sg_start_req(srp))) { + k = sg_start_req(srp, cmnd); + if (k) { SCSI_LOG_TIMEOUT(1, printk("sg_common_write: start_req err=%d\n", k)); sg_finish_rem_req(srp); return k; /* probably out of space --> ENOMEM */ } - if ((k = sg_write_xfer(srp))) { - SCSI_LOG_TIMEOUT(1, printk("sg_common_write: write_xfer, bad address\n")); - sg_finish_rem_req(srp); - return k; - } if (sdp->detached) { sg_finish_rem_req(srp); return -ENODEV; @@ -763,20 +754,11 @@ sg_common_write(Sg_fd * sfp, Sg_request * srp, break; } hp->duration = jiffies_to_msecs(jiffies); -/* Now send everything of to mid-level. The next time we hear about this - packet is when sg_cmd_done() is called (i.e. a callback). */ - if (scsi_execute_async(sdp->device, cmnd, hp->cmd_len, data_dir, srp->data.buffer, - hp->dxfer_len, srp->data.k_use_sg, timeout, - SG_DEFAULT_RETRIES, srp, sg_cmd_done, - GFP_ATOMIC)) { - SCSI_LOG_TIMEOUT(1, printk("sg_common_write: scsi_execute_async failed\n")); - /* - * most likely out of mem, but could also be a bad map - */ - sg_finish_rem_req(srp); - return -ENOMEM; - } else - return 0; + + srp->rq->timeout = timeout; + blk_execute_rq_nowait(sdp->device->request_queue, sdp->disk, + srp->rq, 1, sg_rq_end_io); + return 0; } static int @@ -1192,8 +1174,7 @@ sg_vma_fault(struct vm_area_struct *vma, struct vm_fault *vmf) Sg_fd *sfp; unsigned long offset, len, sa; Sg_scatter_hold *rsv_schp; - struct scatterlist *sg; - int k; + int k, length; if ((NULL == vma) || (!(sfp = (Sg_fd *) vma->vm_private_data))) return VM_FAULT_SIGBUS; @@ -1203,15 +1184,14 @@ sg_vma_fault(struct vm_area_struct *vma, struct vm_fault *vmf) return VM_FAULT_SIGBUS; SCSI_LOG_TIMEOUT(3, printk("sg_vma_fault: offset=%lu, scatg=%d\n", offset, rsv_schp->k_use_sg)); - sg = rsv_schp->buffer; sa = vma->vm_start; - for (k = 0; (k < rsv_schp->k_use_sg) && (sa < vma->vm_end); - ++k, sg = sg_next(sg)) { + length = 1 << (PAGE_SHIFT + rsv_schp->page_order); + for (k = 0; k < rsv_schp->k_use_sg && sa < vma->vm_end; k++) { len = vma->vm_end - sa; - len = (len < sg->length) ? len : sg->length; + len = (len < length) ? len : length; if (offset < len) { - struct page *page; - page = virt_to_page(page_address(sg_page(sg)) + offset); + struct page *page = nth_page(rsv_schp->pages[k], + offset >> PAGE_SHIFT); get_page(page); /* increment page count */ vmf->page = page; return 0; /* success */ @@ -1233,8 +1213,7 @@ sg_mmap(struct file *filp, struct vm_area_struct *vma) Sg_fd *sfp; unsigned long req_sz, len, sa; Sg_scatter_hold *rsv_schp; - int k; - struct scatterlist *sg; + int k, length; if ((!filp) || (!vma) || (!(sfp = (Sg_fd *) filp->private_data))) return -ENXIO; @@ -1248,11 +1227,10 @@ sg_mmap(struct file *filp, struct vm_area_struct *vma) return -ENOMEM; /* cannot map more than reserved buffer */ sa = vma->vm_start; - sg = rsv_schp->buffer; - for (k = 0; (k < rsv_schp->k_use_sg) && (sa < vma->vm_end); - ++k, sg = sg_next(sg)) { + length = 1 << (PAGE_SHIFT + rsv_schp->page_order); + for (k = 0; k < rsv_schp->k_use_sg && sa < vma->vm_end; k++) { len = vma->vm_end - sa; - len = (len < sg->length) ? len : sg->length; + len = (len < length) ? len : length; sa += len; } @@ -1263,16 +1241,19 @@ sg_mmap(struct file *filp, struct vm_area_struct *vma) return 0; } -/* This function is a "bottom half" handler that is called by the - * mid level when a command is completed (or has failed). */ -static void -sg_cmd_done(void *data, char *sense, int result, int resid) +/* + * This function is a "bottom half" handler that is called by the mid + * level when a command is completed (or has failed). + */ +static void sg_rq_end_io(struct request *rq, int uptodate) { - Sg_request *srp = data; + struct sg_request *srp = rq->end_io_data; Sg_device *sdp = NULL; Sg_fd *sfp; unsigned long iflags; unsigned int ms; + char *sense; + int result, resid; if (NULL == srp) { printk(KERN_ERR "sg_cmd_done: NULL request\n"); @@ -1286,6 +1267,9 @@ sg_cmd_done(void *data, char *sense, int result, int resid) return; } + sense = rq->sense; + result = rq->errors; + resid = rq->data_len; SCSI_LOG_TIMEOUT(4, printk("sg_cmd_done: %s, pack_id=%d, res=0x%x\n", sdp->disk->disk_name, srp->header.pack_id, result)); @@ -1296,7 +1280,6 @@ sg_cmd_done(void *data, char *sense, int result, int resid) if (0 != result) { struct scsi_sense_hdr sshdr; - memcpy(srp->sense_b, sense, sizeof (srp->sense_b)); srp->header.status = 0xff & result; srp->header.masked_status = status_byte(result); srp->header.msg_status = msg_byte(result); @@ -1467,12 +1450,10 @@ sg_add(struct device *cl_dev, struct class_interface *cl_intf) if (sg_sysfs_valid) { struct device *sg_class_member; - sg_class_member = device_create_drvdata(sg_sysfs_class, - cl_dev->parent, - MKDEV(SCSI_GENERIC_MAJOR, - sdp->index), - sdp, - "%s", disk->disk_name); + sg_class_member = device_create(sg_sysfs_class, cl_dev->parent, + MKDEV(SCSI_GENERIC_MAJOR, + sdp->index), + sdp, "%s", disk->disk_name); if (IS_ERR(sg_class_member)) { printk(KERN_ERR "sg_add: " "device_create failed\n"); @@ -1634,37 +1615,79 @@ exit_sg(void) idr_destroy(&sg_index_idr); } -static int -sg_start_req(Sg_request * srp) +static int sg_start_req(Sg_request *srp, unsigned char *cmd) { int res; + struct request *rq; Sg_fd *sfp = srp->parentfp; sg_io_hdr_t *hp = &srp->header; int dxfer_len = (int) hp->dxfer_len; int dxfer_dir = hp->dxfer_direction; + unsigned int iov_count = hp->iovec_count; Sg_scatter_hold *req_schp = &srp->data; Sg_scatter_hold *rsv_schp = &sfp->reserve; + struct request_queue *q = sfp->parentdp->device->request_queue; + struct rq_map_data *md, map_data; + int rw = hp->dxfer_direction == SG_DXFER_TO_DEV ? WRITE : READ; + + SCSI_LOG_TIMEOUT(4, printk(KERN_INFO "sg_start_req: dxfer_len=%d\n", + dxfer_len)); + + rq = blk_get_request(q, rw, GFP_ATOMIC); + if (!rq) + return -ENOMEM; + + memcpy(rq->cmd, cmd, hp->cmd_len); + + rq->cmd_len = hp->cmd_len; + rq->cmd_type = REQ_TYPE_BLOCK_PC; + + srp->rq = rq; + rq->end_io_data = srp; + rq->sense = srp->sense_b; + rq->retries = SG_DEFAULT_RETRIES; - SCSI_LOG_TIMEOUT(4, printk("sg_start_req: dxfer_len=%d\n", dxfer_len)); if ((dxfer_len <= 0) || (dxfer_dir == SG_DXFER_NONE)) return 0; - if (sg_allow_dio && (hp->flags & SG_FLAG_DIRECT_IO) && - (dxfer_dir != SG_DXFER_UNKNOWN) && (0 == hp->iovec_count) && - (!sfp->parentdp->device->host->unchecked_isa_dma)) { - res = sg_build_direct(srp, sfp, dxfer_len); - if (res <= 0) /* -ve -> error, 0 -> done, 1 -> try indirect */ - return res; - } - if ((!sg_res_in_use(sfp)) && (dxfer_len <= rsv_schp->bufflen)) - sg_link_reserve(sfp, srp, dxfer_len); - else { - res = sg_build_indirect(req_schp, sfp, dxfer_len); - if (res) { - sg_remove_scat(req_schp); - return res; + + if (sg_allow_dio && hp->flags & SG_FLAG_DIRECT_IO && + dxfer_dir != SG_DXFER_UNKNOWN && !iov_count && + !sfp->parentdp->device->host->unchecked_isa_dma && + blk_rq_aligned(q, hp->dxferp, dxfer_len)) + md = NULL; + else + md = &map_data; + + if (md) { + if (!sg_res_in_use(sfp) && dxfer_len <= rsv_schp->bufflen) + sg_link_reserve(sfp, srp, dxfer_len); + else { + res = sg_build_indirect(req_schp, sfp, dxfer_len); + if (res) + return res; } + + md->pages = req_schp->pages; + md->page_order = req_schp->page_order; + md->nr_entries = req_schp->k_use_sg; } - return 0; + + if (iov_count) + res = blk_rq_map_user_iov(q, rq, md, hp->dxferp, iov_count, + hp->dxfer_len, GFP_ATOMIC); + else + res = blk_rq_map_user(q, rq, md, hp->dxferp, + hp->dxfer_len, GFP_ATOMIC); + + if (!res) { + srp->bio = rq->bio; + + if (!md) { + req_schp->dio_in_use = 1; + hp->info |= SG_INFO_DIRECT_IO; + } + } + return res; } static void @@ -1678,186 +1701,37 @@ sg_finish_rem_req(Sg_request * srp) sg_unlink_reserve(sfp, srp); else sg_remove_scat(req_schp); + + if (srp->rq) { + if (srp->bio) + blk_rq_unmap_user(srp->bio); + + blk_put_request(srp->rq); + } + sg_remove_request(sfp, srp); } static int sg_build_sgat(Sg_scatter_hold * schp, const Sg_fd * sfp, int tablesize) { - int sg_bufflen = tablesize * sizeof(struct scatterlist); + int sg_bufflen = tablesize * sizeof(struct page *); gfp_t gfp_flags = GFP_ATOMIC | __GFP_NOWARN; - /* - * TODO: test without low_dma, we should not need it since - * the block layer will bounce the buffer for us - * - * XXX(hch): we shouldn't need GFP_DMA for the actual S/G list. - */ - if (sfp->low_dma) - gfp_flags |= GFP_DMA; - schp->buffer = kzalloc(sg_bufflen, gfp_flags); - if (!schp->buffer) + schp->pages = kzalloc(sg_bufflen, gfp_flags); + if (!schp->pages) return -ENOMEM; - sg_init_table(schp->buffer, tablesize); schp->sglist_len = sg_bufflen; return tablesize; /* number of scat_gath elements allocated */ } -#ifdef SG_ALLOW_DIO_CODE -/* vvvvvvvv following code borrowed from st driver's direct IO vvvvvvvvv */ - /* TODO: hopefully we can use the generic block layer code */ - -/* Pin down user pages and put them into a scatter gather list. Returns <= 0 if - - mapping of all pages not successful - (i.e., either completely successful or fails) -*/ -static int -st_map_user_pages(struct scatterlist *sgl, const unsigned int max_pages, - unsigned long uaddr, size_t count, int rw) -{ - unsigned long end = (uaddr + count + PAGE_SIZE - 1) >> PAGE_SHIFT; - unsigned long start = uaddr >> PAGE_SHIFT; - const int nr_pages = end - start; - int res, i, j; - struct page **pages; - - /* User attempted Overflow! */ - if ((uaddr + count) < uaddr) - return -EINVAL; - - /* Too big */ - if (nr_pages > max_pages) - return -ENOMEM; - - /* Hmm? */ - if (count == 0) - return 0; - - if ((pages = kmalloc(max_pages * sizeof(*pages), GFP_ATOMIC)) == NULL) - return -ENOMEM; - - /* Try to fault in all of the necessary pages */ - down_read(¤t->mm->mmap_sem); - /* rw==READ means read from drive, write into memory area */ - res = get_user_pages( - current, - current->mm, - uaddr, - nr_pages, - rw == READ, - 0, /* don't force */ - pages, - NULL); - up_read(¤t->mm->mmap_sem); - - /* Errors and no page mapped should return here */ - if (res < nr_pages) - goto out_unmap; - - for (i=0; i < nr_pages; i++) { - /* FIXME: flush superflous for rw==READ, - * probably wrong function for rw==WRITE - */ - flush_dcache_page(pages[i]); - /* ?? Is locking needed? I don't think so */ - /* if (!trylock_page(pages[i])) - goto out_unlock; */ - } - - sg_set_page(sgl, pages[0], 0, uaddr & ~PAGE_MASK); - if (nr_pages > 1) { - sgl[0].length = PAGE_SIZE - sgl[0].offset; - count -= sgl[0].length; - for (i=1; i < nr_pages ; i++) - sg_set_page(&sgl[i], pages[i], count < PAGE_SIZE ? count : PAGE_SIZE, 0); - } - else { - sgl[0].length = count; - } - - kfree(pages); - return nr_pages; - - out_unmap: - if (res > 0) { - for (j=0; j < res; j++) - page_cache_release(pages[j]); - res = 0; - } - kfree(pages); - return res; -} - - -/* And unmap them... */ -static int -st_unmap_user_pages(struct scatterlist *sgl, const unsigned int nr_pages, - int dirtied) -{ - int i; - - for (i=0; i < nr_pages; i++) { - struct page *page = sg_page(&sgl[i]); - - if (dirtied) - SetPageDirty(page); - /* unlock_page(page); */ - /* FIXME: cache flush missing for rw==READ - * FIXME: call the correct reference counting function - */ - page_cache_release(page); - } - - return 0; -} - -/* ^^^^^^^^ above code borrowed from st driver's direct IO ^^^^^^^^^ */ -#endif - - -/* Returns: -ve -> error, 0 -> done, 1 -> try indirect */ -static int -sg_build_direct(Sg_request * srp, Sg_fd * sfp, int dxfer_len) -{ -#ifdef SG_ALLOW_DIO_CODE - sg_io_hdr_t *hp = &srp->header; - Sg_scatter_hold *schp = &srp->data; - int sg_tablesize = sfp->parentdp->sg_tablesize; - int mx_sc_elems, res; - struct scsi_device *sdev = sfp->parentdp->device; - - if (((unsigned long)hp->dxferp & - queue_dma_alignment(sdev->request_queue)) != 0) - return 1; - - mx_sc_elems = sg_build_sgat(schp, sfp, sg_tablesize); - if (mx_sc_elems <= 0) { - return 1; - } - res = st_map_user_pages(schp->buffer, mx_sc_elems, - (unsigned long)hp->dxferp, dxfer_len, - (SG_DXFER_TO_DEV == hp->dxfer_direction) ? 1 : 0); - if (res <= 0) { - sg_remove_scat(schp); - return 1; - } - schp->k_use_sg = res; - schp->dio_in_use = 1; - hp->info |= SG_INFO_DIRECT_IO; - return 0; -#else - return 1; -#endif -} - static int sg_build_indirect(Sg_scatter_hold * schp, Sg_fd * sfp, int buff_size) { - struct scatterlist *sg; - int ret_sz = 0, k, rem_sz, num, mx_sc_elems; + int ret_sz = 0, i, k, rem_sz, num, mx_sc_elems; int sg_tablesize = sfp->parentdp->sg_tablesize; - int blk_size = buff_size; - struct page *p = NULL; + int blk_size = buff_size, order; + gfp_t gfp_mask = GFP_ATOMIC | __GFP_COMP | __GFP_NOWARN; if (blk_size < 0) return -EFAULT; @@ -1881,15 +1755,26 @@ sg_build_indirect(Sg_scatter_hold * schp, Sg_fd * sfp, int buff_size) } else scatter_elem_sz_prev = num; } - for (k = 0, sg = schp->buffer, rem_sz = blk_size; - (rem_sz > 0) && (k < mx_sc_elems); - ++k, rem_sz -= ret_sz, sg = sg_next(sg)) { - + + if (sfp->low_dma) + gfp_mask |= GFP_DMA; + + if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO)) + gfp_mask |= __GFP_ZERO; + + order = get_order(num); +retry: + ret_sz = 1 << (PAGE_SHIFT + order); + + for (k = 0, rem_sz = blk_size; rem_sz > 0 && k < mx_sc_elems; + k++, rem_sz -= ret_sz) { + num = (rem_sz > scatter_elem_sz_prev) ? - scatter_elem_sz_prev : rem_sz; - p = sg_page_malloc(num, sfp->low_dma, &ret_sz); - if (!p) - return -ENOMEM; + scatter_elem_sz_prev : rem_sz; + + schp->pages[k] = alloc_pages(gfp_mask, order); + if (!schp->pages[k]) + goto out; if (num == scatter_elem_sz_prev) { if (unlikely(ret_sz > scatter_elem_sz_prev)) { @@ -1897,12 +1782,12 @@ sg_build_indirect(Sg_scatter_hold * schp, Sg_fd * sfp, int buff_size) scatter_elem_sz_prev = ret_sz; } } - sg_set_page(sg, p, (ret_sz > num) ? num : ret_sz, 0); SCSI_LOG_TIMEOUT(5, printk("sg_build_indirect: k=%d, num=%d, " "ret_sz=%d\n", k, num, ret_sz)); } /* end of for loop */ + schp->page_order = order; schp->k_use_sg = k; SCSI_LOG_TIMEOUT(5, printk("sg_build_indirect: k_use_sg=%d, " "rem_sz=%d\n", k, rem_sz)); @@ -1910,223 +1795,42 @@ sg_build_indirect(Sg_scatter_hold * schp, Sg_fd * sfp, int buff_size) schp->bufflen = blk_size; if (rem_sz > 0) /* must have failed */ return -ENOMEM; - return 0; -} - -static int -sg_write_xfer(Sg_request * srp) -{ - sg_io_hdr_t *hp = &srp->header; - Sg_scatter_hold *schp = &srp->data; - struct scatterlist *sg = schp->buffer; - int num_xfer = 0; - int j, k, onum, usglen, ksglen, res; - int iovec_count = (int) hp->iovec_count; - int dxfer_dir = hp->dxfer_direction; - unsigned char *p; - unsigned char __user *up; - int new_interface = ('\0' == hp->interface_id) ? 0 : 1; - - if ((SG_DXFER_UNKNOWN == dxfer_dir) || (SG_DXFER_TO_DEV == dxfer_dir) || - (SG_DXFER_TO_FROM_DEV == dxfer_dir)) { - num_xfer = (int) (new_interface ? hp->dxfer_len : hp->flags); - if (schp->bufflen < num_xfer) - num_xfer = schp->bufflen; - } - if ((num_xfer <= 0) || (schp->dio_in_use) || - (new_interface - && ((SG_FLAG_NO_DXFER | SG_FLAG_MMAP_IO) & hp->flags))) - return 0; - - SCSI_LOG_TIMEOUT(4, printk("sg_write_xfer: num_xfer=%d, iovec_count=%d, k_use_sg=%d\n", - num_xfer, iovec_count, schp->k_use_sg)); - if (iovec_count) { - onum = iovec_count; - if (!access_ok(VERIFY_READ, hp->dxferp, SZ_SG_IOVEC * onum)) - return -EFAULT; - } else - onum = 1; - - ksglen = sg->length; - p = page_address(sg_page(sg)); - for (j = 0, k = 0; j < onum; ++j) { - res = sg_u_iovec(hp, iovec_count, j, 1, &usglen, &up); - if (res) - return res; - - for (; p; sg = sg_next(sg), ksglen = sg->length, - p = page_address(sg_page(sg))) { - if (usglen <= 0) - break; - if (ksglen > usglen) { - if (usglen >= num_xfer) { - if (__copy_from_user(p, up, num_xfer)) - return -EFAULT; - return 0; - } - if (__copy_from_user(p, up, usglen)) - return -EFAULT; - p += usglen; - ksglen -= usglen; - break; - } else { - if (ksglen >= num_xfer) { - if (__copy_from_user(p, up, num_xfer)) - return -EFAULT; - return 0; - } - if (__copy_from_user(p, up, ksglen)) - return -EFAULT; - up += ksglen; - usglen -= ksglen; - } - ++k; - if (k >= schp->k_use_sg) - return 0; - } - } - - return 0; -} +out: + for (i = 0; i < k; i++) + __free_pages(schp->pages[k], order); -static int -sg_u_iovec(sg_io_hdr_t * hp, int sg_num, int ind, - int wr_xf, int *countp, unsigned char __user **up) -{ - int num_xfer = (int) hp->dxfer_len; - unsigned char __user *p = hp->dxferp; - int count; + if (--order >= 0) + goto retry; - if (0 == sg_num) { - if (wr_xf && ('\0' == hp->interface_id)) - count = (int) hp->flags; /* holds "old" input_size */ - else - count = num_xfer; - } else { - sg_iovec_t iovec; - if (__copy_from_user(&iovec, p + ind*SZ_SG_IOVEC, SZ_SG_IOVEC)) - return -EFAULT; - p = iovec.iov_base; - count = (int) iovec.iov_len; - } - if (!access_ok(wr_xf ? VERIFY_READ : VERIFY_WRITE, p, count)) - return -EFAULT; - if (up) - *up = p; - if (countp) - *countp = count; - return 0; + return -ENOMEM; } static void sg_remove_scat(Sg_scatter_hold * schp) { SCSI_LOG_TIMEOUT(4, printk("sg_remove_scat: k_use_sg=%d\n", schp->k_use_sg)); - if (schp->buffer && (schp->sglist_len > 0)) { - struct scatterlist *sg = schp->buffer; - - if (schp->dio_in_use) { -#ifdef SG_ALLOW_DIO_CODE - st_unmap_user_pages(sg, schp->k_use_sg, TRUE); -#endif - } else { + if (schp->pages && schp->sglist_len > 0) { + if (!schp->dio_in_use) { int k; - for (k = 0; (k < schp->k_use_sg) && sg_page(sg); - ++k, sg = sg_next(sg)) { + for (k = 0; k < schp->k_use_sg && schp->pages[k]; k++) { SCSI_LOG_TIMEOUT(5, printk( - "sg_remove_scat: k=%d, pg=0x%p, len=%d\n", - k, sg_page(sg), sg->length)); - sg_page_free(sg_page(sg), sg->length); + "sg_remove_scat: k=%d, pg=0x%p\n", + k, schp->pages[k])); + __free_pages(schp->pages[k], schp->page_order); } - } - kfree(schp->buffer); - } - memset(schp, 0, sizeof (*schp)); -} -static int -sg_read_xfer(Sg_request * srp) -{ - sg_io_hdr_t *hp = &srp->header; - Sg_scatter_hold *schp = &srp->data; - struct scatterlist *sg = schp->buffer; - int num_xfer = 0; - int j, k, onum, usglen, ksglen, res; - int iovec_count = (int) hp->iovec_count; - int dxfer_dir = hp->dxfer_direction; - unsigned char *p; - unsigned char __user *up; - int new_interface = ('\0' == hp->interface_id) ? 0 : 1; - - if ((SG_DXFER_UNKNOWN == dxfer_dir) || (SG_DXFER_FROM_DEV == dxfer_dir) - || (SG_DXFER_TO_FROM_DEV == dxfer_dir)) { - num_xfer = hp->dxfer_len; - if (schp->bufflen < num_xfer) - num_xfer = schp->bufflen; - } - if ((num_xfer <= 0) || (schp->dio_in_use) || - (new_interface - && ((SG_FLAG_NO_DXFER | SG_FLAG_MMAP_IO) & hp->flags))) - return 0; - - SCSI_LOG_TIMEOUT(4, printk("sg_read_xfer: num_xfer=%d, iovec_count=%d, k_use_sg=%d\n", - num_xfer, iovec_count, schp->k_use_sg)); - if (iovec_count) { - onum = iovec_count; - if (!access_ok(VERIFY_READ, hp->dxferp, SZ_SG_IOVEC * onum)) - return -EFAULT; - } else - onum = 1; - - p = page_address(sg_page(sg)); - ksglen = sg->length; - for (j = 0, k = 0; j < onum; ++j) { - res = sg_u_iovec(hp, iovec_count, j, 0, &usglen, &up); - if (res) - return res; - - for (; p; sg = sg_next(sg), ksglen = sg->length, - p = page_address(sg_page(sg))) { - if (usglen <= 0) - break; - if (ksglen > usglen) { - if (usglen >= num_xfer) { - if (__copy_to_user(up, p, num_xfer)) - return -EFAULT; - return 0; - } - if (__copy_to_user(up, p, usglen)) - return -EFAULT; - p += usglen; - ksglen -= usglen; - break; - } else { - if (ksglen >= num_xfer) { - if (__copy_to_user(up, p, num_xfer)) - return -EFAULT; - return 0; - } - if (__copy_to_user(up, p, ksglen)) - return -EFAULT; - up += ksglen; - usglen -= ksglen; - } - ++k; - if (k >= schp->k_use_sg) - return 0; + kfree(schp->pages); } } - - return 0; + memset(schp, 0, sizeof (*schp)); } static int sg_read_oxfer(Sg_request * srp, char __user *outp, int num_read_xfer) { Sg_scatter_hold *schp = &srp->data; - struct scatterlist *sg = schp->buffer; int k, num; SCSI_LOG_TIMEOUT(4, printk("sg_read_oxfer: num_read_xfer=%d\n", @@ -2134,15 +1838,15 @@ sg_read_oxfer(Sg_request * srp, char __user *outp, int num_read_xfer) if ((!outp) || (num_read_xfer <= 0)) return 0; - for (k = 0; (k < schp->k_use_sg) && sg_page(sg); ++k, sg = sg_next(sg)) { - num = sg->length; + num = 1 << (PAGE_SHIFT + schp->page_order); + for (k = 0; k < schp->k_use_sg && schp->pages[k]; k++) { if (num > num_read_xfer) { - if (__copy_to_user(outp, page_address(sg_page(sg)), + if (__copy_to_user(outp, page_address(schp->pages[k]), num_read_xfer)) return -EFAULT; break; } else { - if (__copy_to_user(outp, page_address(sg_page(sg)), + if (__copy_to_user(outp, page_address(schp->pages[k]), num)) return -EFAULT; num_read_xfer -= num; @@ -2177,24 +1881,21 @@ sg_link_reserve(Sg_fd * sfp, Sg_request * srp, int size) { Sg_scatter_hold *req_schp = &srp->data; Sg_scatter_hold *rsv_schp = &sfp->reserve; - struct scatterlist *sg = rsv_schp->buffer; int k, num, rem; srp->res_used = 1; SCSI_LOG_TIMEOUT(4, printk("sg_link_reserve: size=%d\n", size)); rem = size; - for (k = 0; k < rsv_schp->k_use_sg; ++k, sg = sg_next(sg)) { - num = sg->length; + num = 1 << (PAGE_SHIFT + rsv_schp->page_order); + for (k = 0; k < rsv_schp->k_use_sg; k++) { if (rem <= num) { - sfp->save_scat_len = num; - sg->length = rem; req_schp->k_use_sg = k + 1; req_schp->sglist_len = rsv_schp->sglist_len; - req_schp->buffer = rsv_schp->buffer; + req_schp->pages = rsv_schp->pages; req_schp->bufflen = size; - req_schp->b_malloc_len = rsv_schp->b_malloc_len; + req_schp->page_order = rsv_schp->page_order; break; } else rem -= num; @@ -2208,22 +1909,13 @@ static void sg_unlink_reserve(Sg_fd * sfp, Sg_request * srp) { Sg_scatter_hold *req_schp = &srp->data; - Sg_scatter_hold *rsv_schp = &sfp->reserve; SCSI_LOG_TIMEOUT(4, printk("sg_unlink_reserve: req->k_use_sg=%d\n", (int) req_schp->k_use_sg)); - if ((rsv_schp->k_use_sg > 0) && (req_schp->k_use_sg > 0)) { - struct scatterlist *sg = rsv_schp->buffer; - - if (sfp->save_scat_len > 0) - (sg + (req_schp->k_use_sg - 1))->length = - (unsigned) sfp->save_scat_len; - else - SCSI_LOG_TIMEOUT(1, printk ("sg_unlink_reserve: BAD save_scat_len\n")); - } req_schp->k_use_sg = 0; req_schp->bufflen = 0; - req_schp->buffer = NULL; + req_schp->pages = NULL; + req_schp->page_order = 0; req_schp->sglist_len = 0; sfp->save_scat_len = 0; srp->res_used = 0; @@ -2481,53 +2173,6 @@ sg_res_in_use(Sg_fd * sfp) return srp ? 1 : 0; } -/* The size fetched (value output via retSzp) set when non-NULL return */ -static struct page * -sg_page_malloc(int rqSz, int lowDma, int *retSzp) -{ - struct page *resp = NULL; - gfp_t page_mask; - int order, a_size; - int resSz; - - if ((rqSz <= 0) || (NULL == retSzp)) - return resp; - - if (lowDma) - page_mask = GFP_ATOMIC | GFP_DMA | __GFP_COMP | __GFP_NOWARN; - else - page_mask = GFP_ATOMIC | __GFP_COMP | __GFP_NOWARN; - - for (order = 0, a_size = PAGE_SIZE; a_size < rqSz; - order++, a_size <<= 1) ; - resSz = a_size; /* rounded up if necessary */ - resp = alloc_pages(page_mask, order); - while ((!resp) && order) { - --order; - a_size >>= 1; /* divide by 2, until PAGE_SIZE */ - resp = alloc_pages(page_mask, order); /* try half */ - resSz = a_size; - } - if (resp) { - if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO)) - memset(page_address(resp), 0, resSz); - *retSzp = resSz; - } - return resp; -} - -static void -sg_page_free(struct page *page, int size) -{ - int order, a_size; - - if (!page) - return; - for (order = 0, a_size = PAGE_SIZE; a_size < size; - order++, a_size <<= 1) ; - __free_pages(page, order); -} - #ifdef CONFIG_SCSI_PROC_FS static int sg_idr_max_id(int id, void *p, void *data) diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c index 27f5bfd1def..0f17009c99d 100644 --- a/drivers/scsi/sr.c +++ b/drivers/scsi/sr.c @@ -331,7 +331,7 @@ static int sr_done(struct scsi_cmnd *SCpnt) static int sr_prep_fn(struct request_queue *q, struct request *rq) { - int block=0, this_count, s_size, timeout = SR_TIMEOUT; + int block = 0, this_count, s_size; struct scsi_cd *cd; struct scsi_cmnd *SCpnt; struct scsi_device *sdp = q->queuedata; @@ -461,7 +461,6 @@ static int sr_prep_fn(struct request_queue *q, struct request *rq) SCpnt->transfersize = cd->device->sector_size; SCpnt->underflow = this_count << 9; SCpnt->allowed = MAX_RETRIES; - SCpnt->timeout_per_command = timeout; /* * This indicates that the command is ready from our end to be @@ -620,6 +619,8 @@ static int sr_probe(struct device *dev) disk->fops = &sr_bdops; disk->flags = GENHD_FL_CD; + blk_queue_rq_timeout(sdev->request_queue, SR_TIMEOUT); + cd->device = sdev; cd->disk = disk; cd->driver = &sr_template; @@ -878,7 +879,7 @@ static void sr_kref_release(struct kref *kref) struct gendisk *disk = cd->disk; spin_lock(&sr_index_lock); - clear_bit(disk->first_minor, sr_index_bits); + clear_bit(MINOR(disk_devt(disk)), sr_index_bits); spin_unlock(&sr_index_lock); unregister_cdrom(&cd->cdi); diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c index c2bb53e3d94..5c28d08f18f 100644 --- a/drivers/scsi/st.c +++ b/drivers/scsi/st.c @@ -4428,13 +4428,10 @@ static int do_create_class_files(struct scsi_tape *STp, int dev_num, int mode) snprintf(name, 10, "%s%s%s", rew ? "n" : "", STp->disk->disk_name, st_formats[i]); st_class_member = - device_create_drvdata(st_sysfs_class, - &STp->device->sdev_gendev, - MKDEV(SCSI_TAPE_MAJOR, - TAPE_MINOR(dev_num, - mode, rew)), - &STp->modes[mode], - "%s", name); + device_create(st_sysfs_class, &STp->device->sdev_gendev, + MKDEV(SCSI_TAPE_MAJOR, + TAPE_MINOR(dev_num, mode, rew)), + &STp->modes[mode], "%s", name); if (IS_ERR(st_class_member)) { printk(KERN_WARNING "st%d: device_create failed\n", dev_num); diff --git a/drivers/scsi/sun_esp.c b/drivers/scsi/sun_esp.c index f9cf7015136..3d73aad4bc8 100644 --- a/drivers/scsi/sun_esp.c +++ b/drivers/scsi/sun_esp.c @@ -1,6 +1,6 @@ /* sun_esp.c: ESP front-end for Sparc SBUS systems. * - * Copyright (C) 2007 David S. Miller (davem@davemloft.net) + * Copyright (C) 2007, 2008 David S. Miller (davem@davemloft.net) */ #include <linux/kernel.h> @@ -9,60 +9,70 @@ #include <linux/module.h> #include <linux/mm.h> #include <linux/init.h> +#include <linux/dma-mapping.h> +#include <linux/of.h> +#include <linux/of_device.h> #include <asm/irq.h> #include <asm/io.h> #include <asm/dma.h> -#include <asm/sbus.h> - #include <scsi/scsi_host.h> #include "esp_scsi.h" #define DRV_MODULE_NAME "sun_esp" #define PFX DRV_MODULE_NAME ": " -#define DRV_VERSION "1.000" -#define DRV_MODULE_RELDATE "April 19, 2007" +#define DRV_VERSION "1.100" +#define DRV_MODULE_RELDATE "August 27, 2008" #define dma_read32(REG) \ sbus_readl(esp->dma_regs + (REG)) #define dma_write32(VAL, REG) \ sbus_writel((VAL), esp->dma_regs + (REG)) -static int __devinit esp_sbus_find_dma(struct esp *esp, struct sbus_dev *dma_sdev) -{ - struct sbus_dev *sdev = esp->dev; - struct sbus_dma *dma; +/* DVMA chip revisions */ +enum dvma_rev { + dvmarev0, + dvmaesc1, + dvmarev1, + dvmarev2, + dvmarev3, + dvmarevplus, + dvmahme +}; - if (dma_sdev != NULL) { - for_each_dvma(dma) { - if (dma->sdev == dma_sdev) - break; - } - } else { - for_each_dvma(dma) { - if (dma->sdev == NULL) - break; +static int __devinit esp_sbus_setup_dma(struct esp *esp, + struct of_device *dma_of) +{ + esp->dma = dma_of; - /* If bus + slot are the same and it has the - * correct OBP name, it's ours. - */ - if (sdev->bus == dma->sdev->bus && - sdev->slot == dma->sdev->slot && - (!strcmp(dma->sdev->prom_name, "dma") || - !strcmp(dma->sdev->prom_name, "espdma"))) - break; - } - } + esp->dma_regs = of_ioremap(&dma_of->resource[0], 0, + resource_size(&dma_of->resource[0]), + "espdma"); + if (!esp->dma_regs) + return -ENOMEM; - if (dma == NULL) { - printk(KERN_ERR PFX "[%s] Cannot find dma.\n", - sdev->ofdev.node->full_name); - return -ENODEV; + switch (dma_read32(DMA_CSR) & DMA_DEVICE_ID) { + case DMA_VERS0: + esp->dmarev = dvmarev0; + break; + case DMA_ESCV1: + esp->dmarev = dvmaesc1; + break; + case DMA_VERS1: + esp->dmarev = dvmarev1; + break; + case DMA_VERS2: + esp->dmarev = dvmarev2; + break; + case DMA_VERHME: + esp->dmarev = dvmahme; + break; + case DMA_VERSPLUS: + esp->dmarev = dvmarevplus; + break; } - esp->dma = dma; - esp->dma_regs = dma->regs; return 0; @@ -70,18 +80,18 @@ static int __devinit esp_sbus_find_dma(struct esp *esp, struct sbus_dev *dma_sde static int __devinit esp_sbus_map_regs(struct esp *esp, int hme) { - struct sbus_dev *sdev = esp->dev; + struct of_device *op = esp->dev; struct resource *res; /* On HME, two reg sets exist, first is DVMA, * second is ESP registers. */ if (hme) - res = &sdev->resource[1]; + res = &op->resource[1]; else - res = &sdev->resource[0]; + res = &op->resource[0]; - esp->regs = sbus_ioremap(res, 0, SBUS_ESP_REG_SIZE, "ESP"); + esp->regs = of_ioremap(res, 0, SBUS_ESP_REG_SIZE, "ESP"); if (!esp->regs) return -ENOMEM; @@ -90,10 +100,11 @@ static int __devinit esp_sbus_map_regs(struct esp *esp, int hme) static int __devinit esp_sbus_map_command_block(struct esp *esp) { - struct sbus_dev *sdev = esp->dev; + struct of_device *op = esp->dev; - esp->command_block = sbus_alloc_consistent(sdev, 16, - &esp->command_block_dma); + esp->command_block = dma_alloc_coherent(&op->dev, 16, + &esp->command_block_dma, + GFP_ATOMIC); if (!esp->command_block) return -ENOMEM; return 0; @@ -102,17 +113,18 @@ static int __devinit esp_sbus_map_command_block(struct esp *esp) static int __devinit esp_sbus_register_irq(struct esp *esp) { struct Scsi_Host *host = esp->host; - struct sbus_dev *sdev = esp->dev; + struct of_device *op = esp->dev; - host->irq = sdev->irqs[0]; + host->irq = op->irqs[0]; return request_irq(host->irq, scsi_esp_intr, IRQF_SHARED, "ESP", esp); } -static void __devinit esp_get_scsi_id(struct esp *esp) +static void __devinit esp_get_scsi_id(struct esp *esp, struct of_device *espdma) { - struct sbus_dev *sdev = esp->dev; - struct device_node *dp = sdev->ofdev.node; + struct of_device *op = esp->dev; + struct device_node *dp; + dp = op->node; esp->scsi_id = of_getintprop_default(dp, "initiator-id", 0xff); if (esp->scsi_id != 0xff) goto done; @@ -121,13 +133,7 @@ static void __devinit esp_get_scsi_id(struct esp *esp) if (esp->scsi_id != 0xff) goto done; - if (!sdev->bus) { - /* SUN4 */ - esp->scsi_id = 7; - goto done; - } - - esp->scsi_id = of_getintprop_default(sdev->bus->ofdev.node, + esp->scsi_id = of_getintprop_default(espdma->node, "scsi-initiator-id", 7); done: @@ -137,9 +143,10 @@ done: static void __devinit esp_get_differential(struct esp *esp) { - struct sbus_dev *sdev = esp->dev; - struct device_node *dp = sdev->ofdev.node; + struct of_device *op = esp->dev; + struct device_node *dp; + dp = op->node; if (of_find_property(dp, "differential", NULL)) esp->flags |= ESP_FLAG_DIFFERENTIAL; else @@ -148,43 +155,36 @@ static void __devinit esp_get_differential(struct esp *esp) static void __devinit esp_get_clock_params(struct esp *esp) { - struct sbus_dev *sdev = esp->dev; - struct device_node *dp = sdev->ofdev.node; - struct device_node *bus_dp; + struct of_device *op = esp->dev; + struct device_node *bus_dp, *dp; int fmhz; - bus_dp = NULL; - if (sdev != NULL && sdev->bus != NULL) - bus_dp = sdev->bus->ofdev.node; + dp = op->node; + bus_dp = dp->parent; fmhz = of_getintprop_default(dp, "clock-frequency", 0); if (fmhz == 0) - fmhz = (!bus_dp) ? 0 : - of_getintprop_default(bus_dp, "clock-frequency", 0); + fmhz = of_getintprop_default(bus_dp, "clock-frequency", 0); esp->cfreq = fmhz; } -static void __devinit esp_get_bursts(struct esp *esp, struct sbus_dev *dma) +static void __devinit esp_get_bursts(struct esp *esp, struct of_device *dma_of) { - struct sbus_dev *sdev = esp->dev; - struct device_node *dp = sdev->ofdev.node; - u8 bursts; + struct device_node *dma_dp = dma_of->node; + struct of_device *op = esp->dev; + struct device_node *dp; + u8 bursts, val; + dp = op->node; bursts = of_getintprop_default(dp, "burst-sizes", 0xff); - if (dma) { - struct device_node *dma_dp = dma->ofdev.node; - u8 val = of_getintprop_default(dma_dp, "burst-sizes", 0xff); - if (val != 0xff) - bursts &= val; - } + val = of_getintprop_default(dma_dp, "burst-sizes", 0xff); + if (val != 0xff) + bursts &= val; - if (sdev->bus) { - u8 val = of_getintprop_default(sdev->bus->ofdev.node, - "burst-sizes", 0xff); - if (val != 0xff) - bursts &= val; - } + val = of_getintprop_default(dma_dp->parent, "burst-sizes", 0xff); + if (val != 0xff) + bursts &= val; if (bursts == 0xff || (bursts & DMA_BURST16) == 0 || @@ -194,9 +194,9 @@ static void __devinit esp_get_bursts(struct esp *esp, struct sbus_dev *dma) esp->bursts = bursts; } -static void __devinit esp_sbus_get_props(struct esp *esp, struct sbus_dev *espdma) +static void __devinit esp_sbus_get_props(struct esp *esp, struct of_device *espdma) { - esp_get_scsi_id(esp); + esp_get_scsi_id(esp, espdma); esp_get_differential(esp); esp_get_clock_params(esp); esp_get_bursts(esp, espdma); @@ -215,25 +215,33 @@ static u8 sbus_esp_read8(struct esp *esp, unsigned long reg) static dma_addr_t sbus_esp_map_single(struct esp *esp, void *buf, size_t sz, int dir) { - return sbus_map_single(esp->dev, buf, sz, dir); + struct of_device *op = esp->dev; + + return dma_map_single(&op->dev, buf, sz, dir); } static int sbus_esp_map_sg(struct esp *esp, struct scatterlist *sg, int num_sg, int dir) { - return sbus_map_sg(esp->dev, sg, num_sg, dir); + struct of_device *op = esp->dev; + + return dma_map_sg(&op->dev, sg, num_sg, dir); } static void sbus_esp_unmap_single(struct esp *esp, dma_addr_t addr, size_t sz, int dir) { - sbus_unmap_single(esp->dev, addr, sz, dir); + struct of_device *op = esp->dev; + + dma_unmap_single(&op->dev, addr, sz, dir); } static void sbus_esp_unmap_sg(struct esp *esp, struct scatterlist *sg, int num_sg, int dir) { - sbus_unmap_sg(esp->dev, sg, num_sg, dir); + struct of_device *op = esp->dev; + + dma_unmap_sg(&op->dev, sg, num_sg, dir); } static int sbus_esp_irq_pending(struct esp *esp) @@ -247,24 +255,26 @@ static void sbus_esp_reset_dma(struct esp *esp) { int can_do_burst16, can_do_burst32, can_do_burst64; int can_do_sbus64, lim; + struct of_device *op; u32 val; can_do_burst16 = (esp->bursts & DMA_BURST16) != 0; can_do_burst32 = (esp->bursts & DMA_BURST32) != 0; can_do_burst64 = 0; can_do_sbus64 = 0; - if (sbus_can_dma_64bit(esp->dev)) + op = esp->dev; + if (sbus_can_dma_64bit()) can_do_sbus64 = 1; - if (sbus_can_burst64(esp->sdev)) + if (sbus_can_burst64()) can_do_burst64 = (esp->bursts & DMA_BURST64) != 0; /* Put the DVMA into a known state. */ - if (esp->dma->revision != dvmahme) { + if (esp->dmarev != dvmahme) { val = dma_read32(DMA_CSR); dma_write32(val | DMA_RST_SCSI, DMA_CSR); dma_write32(val & ~DMA_RST_SCSI, DMA_CSR); } - switch (esp->dma->revision) { + switch (esp->dmarev) { case dvmahme: dma_write32(DMA_RESET_FAS366, DMA_CSR); dma_write32(DMA_RST_SCSI, DMA_CSR); @@ -282,7 +292,7 @@ static void sbus_esp_reset_dma(struct esp *esp) if (can_do_sbus64) { esp->prev_hme_dmacsr |= DMA_SCSI_SBUS64; - sbus_set_sbus64(esp->dev, esp->bursts); + sbus_set_sbus64(&op->dev, esp->bursts); } lim = 1000; @@ -346,14 +356,14 @@ static void sbus_esp_dma_drain(struct esp *esp) u32 csr; int lim; - if (esp->dma->revision == dvmahme) + if (esp->dmarev == dvmahme) return; csr = dma_read32(DMA_CSR); if (!(csr & DMA_FIFO_ISDRAIN)) return; - if (esp->dma->revision != dvmarev3 && esp->dma->revision != dvmaesc1) + if (esp->dmarev != dvmarev3 && esp->dmarev != dvmaesc1) dma_write32(csr | DMA_FIFO_STDRAIN, DMA_CSR); lim = 1000; @@ -369,7 +379,7 @@ static void sbus_esp_dma_drain(struct esp *esp) static void sbus_esp_dma_invalidate(struct esp *esp) { - if (esp->dma->revision == dvmahme) { + if (esp->dmarev == dvmahme) { dma_write32(DMA_RST_SCSI, DMA_CSR); esp->prev_hme_dmacsr = ((esp->prev_hme_dmacsr | @@ -440,7 +450,7 @@ static void sbus_esp_send_dma_cmd(struct esp *esp, u32 addr, u32 esp_count, else csr &= ~DMA_ST_WRITE; dma_write32(csr, DMA_CSR); - if (esp->dma->revision == dvmaesc1) { + if (esp->dmarev == dvmaesc1) { u32 end = PAGE_ALIGN(addr + dma_count + 16U); dma_write32(end - addr, DMA_COUNT); } @@ -476,10 +486,8 @@ static const struct esp_driver_ops sbus_esp_ops = { .dma_error = sbus_esp_dma_error, }; -static int __devinit esp_sbus_probe_one(struct device *dev, - struct sbus_dev *esp_dev, - struct sbus_dev *espdma, - struct sbus_bus *sbus, +static int __devinit esp_sbus_probe_one(struct of_device *op, + struct of_device *espdma, int hme) { struct scsi_host_template *tpnt = &scsi_esp_template; @@ -497,13 +505,13 @@ static int __devinit esp_sbus_probe_one(struct device *dev, esp = shost_priv(host); esp->host = host; - esp->dev = esp_dev; + esp->dev = op; esp->ops = &sbus_esp_ops; if (hme) esp->flags |= ESP_FLAG_WIDE_CAPABLE; - err = esp_sbus_find_dma(esp, espdma); + err = esp_sbus_setup_dma(esp, espdma); if (err < 0) goto fail_unlink; @@ -525,15 +533,15 @@ static int __devinit esp_sbus_probe_one(struct device *dev, * come up with the reset bit set, so make sure that * is clear first. */ - if (esp->dma->revision == dvmaesc1) { + if (esp->dmarev == dvmaesc1) { u32 val = dma_read32(DMA_CSR); dma_write32(val & ~DMA_RST_SCSI, DMA_CSR); } - dev_set_drvdata(&esp_dev->ofdev.dev, esp); + dev_set_drvdata(&op->dev, esp); - err = scsi_esp_register(esp, dev); + err = scsi_esp_register(esp, &op->dev); if (err) goto fail_free_irq; @@ -542,41 +550,46 @@ static int __devinit esp_sbus_probe_one(struct device *dev, fail_free_irq: free_irq(host->irq, esp); fail_unmap_command_block: - sbus_free_consistent(esp->dev, 16, - esp->command_block, - esp->command_block_dma); + dma_free_coherent(&op->dev, 16, + esp->command_block, + esp->command_block_dma); fail_unmap_regs: - sbus_iounmap(esp->regs, SBUS_ESP_REG_SIZE); + of_iounmap(&op->resource[(hme ? 1 : 0)], esp->regs, SBUS_ESP_REG_SIZE); fail_unlink: scsi_host_put(host); fail: return err; } -static int __devinit esp_sbus_probe(struct of_device *dev, const struct of_device_id *match) +static int __devinit esp_sbus_probe(struct of_device *op, const struct of_device_id *match) { - struct sbus_dev *sdev = to_sbus_device(&dev->dev); - struct device_node *dp = dev->node; - struct sbus_dev *dma_sdev = NULL; + struct device_node *dma_node = NULL; + struct device_node *dp = op->node; + struct of_device *dma_of = NULL; int hme = 0; if (dp->parent && (!strcmp(dp->parent->name, "espdma") || !strcmp(dp->parent->name, "dma"))) - dma_sdev = sdev->parent; + dma_node = dp->parent; else if (!strcmp(dp->name, "SUNW,fas")) { - dma_sdev = sdev; + dma_node = op->node; hme = 1; } + if (dma_node) + dma_of = of_find_device_by_node(dma_node); + if (!dma_of) + return -ENODEV; - return esp_sbus_probe_one(&dev->dev, sdev, dma_sdev, - sdev->bus, hme); + return esp_sbus_probe_one(op, dma_of, hme); } -static int __devexit esp_sbus_remove(struct of_device *dev) +static int __devexit esp_sbus_remove(struct of_device *op) { - struct esp *esp = dev_get_drvdata(&dev->dev); + struct esp *esp = dev_get_drvdata(&op->dev); + struct of_device *dma_of = esp->dma; unsigned int irq = esp->host->irq; + bool is_hme; u32 val; scsi_esp_unregister(esp); @@ -586,17 +599,25 @@ static int __devexit esp_sbus_remove(struct of_device *dev) dma_write32(val & ~DMA_INT_ENAB, DMA_CSR); free_irq(irq, esp); - sbus_free_consistent(esp->dev, 16, - esp->command_block, - esp->command_block_dma); - sbus_iounmap(esp->regs, SBUS_ESP_REG_SIZE); + + is_hme = (esp->dmarev == dvmahme); + + dma_free_coherent(&op->dev, 16, + esp->command_block, + esp->command_block_dma); + of_iounmap(&op->resource[(is_hme ? 1 : 0)], esp->regs, + SBUS_ESP_REG_SIZE); + of_iounmap(&dma_of->resource[0], esp->dma_regs, + resource_size(&dma_of->resource[0])); scsi_host_put(esp->host); + dev_set_drvdata(&op->dev, NULL); + return 0; } -static struct of_device_id esp_match[] = { +static const struct of_device_id esp_match[] = { { .name = "SUNW,esp", }, @@ -619,7 +640,7 @@ static struct of_platform_driver esp_sbus_driver = { static int __init sunesp_init(void) { - return of_register_driver(&esp_sbus_driver, &sbus_bus_type); + return of_register_driver(&esp_sbus_driver, &of_bus_type); } static void __exit sunesp_exit(void) diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c index d39107b7669..f4e6cde1fd0 100644 --- a/drivers/scsi/sym53c8xx_2/sym_glue.c +++ b/drivers/scsi/sym53c8xx_2/sym_glue.c @@ -519,8 +519,8 @@ static int sym53c8xx_queue_command(struct scsi_cmnd *cmd, * Shorten our settle_time if needed for * this command not to time out. */ - if (np->s.settle_time_valid && cmd->timeout_per_command) { - unsigned long tlimit = jiffies + cmd->timeout_per_command; + if (np->s.settle_time_valid && cmd->request->timeout) { + unsigned long tlimit = jiffies + cmd->request->timeout; tlimit -= SYM_CONF_TIMER_INTERVAL*2; if (time_after(np->s.settle_time, tlimit)) { np->s.settle_time = tlimit; diff --git a/drivers/scsi/tmscsim.c b/drivers/scsi/tmscsim.c index 1723d71cbf3..69ac6e590f1 100644 --- a/drivers/scsi/tmscsim.c +++ b/drivers/scsi/tmscsim.c @@ -2573,8 +2573,8 @@ static struct pci_driver dc390_driver = { static int __init dc390_module_init(void) { if (!disable_clustering) - printk(KERN_INFO "DC390: clustering now enabled by default. If you get problems load\n" - "\twith \"disable_clustering=1\" and report to maintainers\n"); + printk(KERN_INFO "DC390: clustering now enabled by default. If you get problems load\n"); + printk(KERN_INFO " with \"disable_clustering=1\" and report to maintainers\n"); if (tmscsim[0] == -1 || tmscsim[0] > 15) { tmscsim[0] = 7; |