diff options
Diffstat (limited to 'drivers/scsi')
-rw-r--r-- | drivers/scsi/lpfc/lpfc_attr.c | 64 | ||||
-rw-r--r-- | drivers/scsi/lpfc/lpfc_hw.h | 4 | ||||
-rw-r--r-- | drivers/scsi/lpfc/lpfc_hw4.h | 19 | ||||
-rw-r--r-- | drivers/scsi/lpfc/lpfc_init.c | 18 |
4 files changed, 98 insertions, 7 deletions
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 8dcbf8fff67..44816be4d72 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -755,6 +755,61 @@ lpfc_issue_reset(struct device *dev, struct device_attribute *attr, } /** + * lpfc_sli4_fw_dump_request - Request firmware to perform a firmware dump + * @phba: lpfc_hba pointer. + * + * Description: + * Request SLI4 interface type-2 device to perform a dump of firmware dump + * object into it's /dbg directory of the flash file system. + * + * Returns: + * zero for success + **/ +static ssize_t +lpfc_sli4_fw_dump_request(struct lpfc_hba *phba) +{ + struct completion online_compl; + uint32_t reg_val; + int status = 0; + int rc; + + if (!phba->cfg_enable_hba_reset) + return -EIO; + + status = lpfc_do_offline(phba, LPFC_EVT_OFFLINE); + + if (status != 0) + return status; + + /* wait for the device to be quiesced before firmware reset */ + msleep(100); + + reg_val = readl(phba->sli4_hba.conf_regs_memmap_p + + LPFC_CTL_PDEV_CTL_OFFSET); + reg_val |= LPFC_FW_DUMP_REQUEST; + writel(reg_val, phba->sli4_hba.conf_regs_memmap_p + + LPFC_CTL_PDEV_CTL_OFFSET); + /* flush */ + readl(phba->sli4_hba.conf_regs_memmap_p + LPFC_CTL_PDEV_CTL_OFFSET); + + /* delay driver action following IF_TYPE_2 reset */ + msleep(100); + + init_completion(&online_compl); + rc = lpfc_workq_post_event(phba, &status, &online_compl, + LPFC_EVT_ONLINE); + if (rc == 0) + return -ENOMEM; + + wait_for_completion(&online_compl); + + if (status != 0) + return -EIO; + + return 0; +} + +/** * lpfc_nport_evt_cnt_show - Return the number of nport events * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. @@ -848,6 +903,13 @@ lpfc_board_mode_store(struct device *dev, struct device_attribute *attr, return -EINVAL; else status = lpfc_do_offline(phba, LPFC_EVT_KILL); + else if (strncmp(buf, "dump", sizeof("dump") - 1) == 0) + if ((phba->sli_rev < LPFC_SLI_REV4) || + (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) != + LPFC_SLI_INTF_IF_TYPE_2)) + return -EPERM; + else + status = lpfc_sli4_fw_dump_request(phba); else return -EINVAL; @@ -3961,7 +4023,7 @@ static struct bin_attribute sysfs_mbox_attr = { .name = "mbox", .mode = S_IRUSR | S_IWUSR, }, - .size = MAILBOX_CMD_SIZE, + .size = MAILBOX_SYSFS_MAX, .read = sysfs_mbox_read, .write = sysfs_mbox_write, }; diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h index 86b6f7e6686..6aa53aca23e 100644 --- a/drivers/scsi/lpfc/lpfc_hw.h +++ b/drivers/scsi/lpfc/lpfc_hw.h @@ -1199,7 +1199,9 @@ typedef struct { #define PCI_DEVICE_ID_BALIUS 0xe131 #define PCI_DEVICE_ID_PROTEUS_PF 0xe180 #define PCI_DEVICE_ID_LANCER_FC 0xe200 +#define PCI_DEVICE_ID_LANCER_FC_VF 0xe208 #define PCI_DEVICE_ID_LANCER_FCOE 0xe260 +#define PCI_DEVICE_ID_LANCER_FCOE_VF 0xe268 #define PCI_DEVICE_ID_SAT_SMB 0xf011 #define PCI_DEVICE_ID_SAT_MID 0xf015 #define PCI_DEVICE_ID_RFLY 0xf095 @@ -3021,7 +3023,7 @@ typedef struct { #define MAILBOX_EXT_SIZE (MAILBOX_EXT_WSIZE * sizeof(uint32_t)) #define MAILBOX_HBA_EXT_OFFSET 0x100 /* max mbox xmit size is a page size for sysfs IO operations */ -#define MAILBOX_MAX_XMIT_SIZE PAGE_SIZE +#define MAILBOX_SYSFS_MAX 4096 typedef union { uint32_t varWords[MAILBOX_CMD_WSIZE - 1]; /* first word is type/ diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h index 2e75f3df04f..ca7c1dd6193 100644 --- a/drivers/scsi/lpfc/lpfc_hw4.h +++ b/drivers/scsi/lpfc/lpfc_hw4.h @@ -170,6 +170,25 @@ struct lpfc_sli_intf { #define LPFC_PCI_FUNC3 3 #define LPFC_PCI_FUNC4 4 +/* SLI4 interface type-2 control register offsets */ +#define LPFC_CTL_PORT_SEM_OFFSET 0x400 +#define LPFC_CTL_PORT_STA_OFFSET 0x404 +#define LPFC_CTL_PORT_CTL_OFFSET 0x408 +#define LPFC_CTL_PORT_ER1_OFFSET 0x40C +#define LPFC_CTL_PORT_ER2_OFFSET 0x410 +#define LPFC_CTL_PDEV_CTL_OFFSET 0x414 + +/* Some SLI4 interface type-2 PDEV_CTL register bits */ +#define LPFC_CTL_PDEV_CTL_DRST 0x00000001 +#define LPFC_CTL_PDEV_CTL_FRST 0x00000002 +#define LPFC_CTL_PDEV_CTL_DD 0x00000004 +#define LPFC_CTL_PDEV_CTL_LC 0x00000008 +#define LPFC_CTL_PDEV_CTL_FRL_ALL 0x00 +#define LPFC_CTL_PDEV_CTL_FRL_FC_FCOE 0x10 +#define LPFC_CTL_PDEV_CTL_FRL_NIC 0x20 + +#define LPFC_FW_DUMP_REQUEST (LPFC_CTL_PDEV_CTL_DD | LPFC_CTL_PDEV_CTL_FRST) + /* Active interrupt test count */ #define LPFC_ACT_INTR_CNT 4 diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index f297f9d027d..16b4da4530b 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -1784,7 +1784,9 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp) && descp && descp[0] != '\0') return; - if (phba->lmt & LMT_10Gb) + if (phba->lmt & LMT_16Gb) + max_speed = 16; + else if (phba->lmt & LMT_10Gb) max_speed = 10; else if (phba->lmt & LMT_8Gb) max_speed = 8; @@ -1951,12 +1953,13 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp) "Fibre Channel Adapter"}; break; case PCI_DEVICE_ID_LANCER_FC: - oneConnect = 1; - m = (typeof(m)){"Undefined", "PCIe", "Fibre Channel Adapter"}; + case PCI_DEVICE_ID_LANCER_FC_VF: + m = (typeof(m)){"LPe16000", "PCIe", "Fibre Channel Adapter"}; break; case PCI_DEVICE_ID_LANCER_FCOE: + case PCI_DEVICE_ID_LANCER_FCOE_VF: oneConnect = 1; - m = (typeof(m)){"Undefined", "PCIe", "FCoE"}; + m = (typeof(m)){"OCe50100", "PCIe", "FCoE"}; break; default: m = (typeof(m)){"Unknown", "", ""}; @@ -1965,7 +1968,8 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp) if (mdp && mdp[0] == '\0') snprintf(mdp, 79,"%s", m.name); - /* oneConnect hba requires special processing, they are all initiators + /* + * oneConnect hba requires special processing, they are all initiators * and we put the port number on the end */ if (descp && descp[0] == '\0') { @@ -9580,6 +9584,10 @@ static struct pci_device_id lpfc_id_table[] = { PCI_ANY_ID, PCI_ANY_ID, }, {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LANCER_FCOE, PCI_ANY_ID, PCI_ANY_ID, }, + {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LANCER_FC_VF, + PCI_ANY_ID, PCI_ANY_ID, }, + {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LANCER_FCOE_VF, + PCI_ANY_ID, PCI_ANY_ID, }, { 0 } }; |