diff options
Diffstat (limited to 'drivers/scsi')
-rw-r--r-- | drivers/scsi/Kconfig | 8 | ||||
-rw-r--r-- | drivers/scsi/Makefile | 2 | ||||
-rw-r--r-- | drivers/scsi/ahci.c | 197 | ||||
-rw-r--r-- | drivers/scsi/ata_piix.c | 392 | ||||
-rw-r--r-- | drivers/scsi/libata-bmdma.c | 703 | ||||
-rw-r--r-- | drivers/scsi/libata-core.c | 2794 | ||||
-rw-r--r-- | drivers/scsi/libata-scsi.c | 240 | ||||
-rw-r--r-- | drivers/scsi/libata.h | 3 | ||||
-rw-r--r-- | drivers/scsi/pcmcia/Kconfig | 1 | ||||
-rw-r--r-- | drivers/scsi/pdc_adma.c | 6 | ||||
-rw-r--r-- | drivers/scsi/sata_mv.c | 281 | ||||
-rw-r--r-- | drivers/scsi/sata_nv.c | 2 | ||||
-rw-r--r-- | drivers/scsi/sata_promise.c | 129 | ||||
-rw-r--r-- | drivers/scsi/sata_qstor.c | 10 | ||||
-rw-r--r-- | drivers/scsi/sata_sil.c | 126 | ||||
-rw-r--r-- | drivers/scsi/sata_sil24.c | 102 | ||||
-rw-r--r-- | drivers/scsi/sata_sis.c | 2 | ||||
-rw-r--r-- | drivers/scsi/sata_svw.c | 2 | ||||
-rw-r--r-- | drivers/scsi/sata_sx4.c | 25 | ||||
-rw-r--r-- | drivers/scsi/sata_uli.c | 2 | ||||
-rw-r--r-- | drivers/scsi/sata_via.c | 2 | ||||
-rw-r--r-- | drivers/scsi/sata_vsc.c | 2 | ||||
-rw-r--r-- | drivers/scsi/scsi_devinfo.c | 1 | ||||
-rw-r--r-- | drivers/scsi/scsi_error.c | 7 | ||||
-rw-r--r-- | drivers/scsi/scsi_transport_fc.c | 2 |
25 files changed, 3066 insertions, 1975 deletions
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 3c606cf8c8c..5c94a5d4efc 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -379,6 +379,14 @@ config SCSI_AHA1740 config SCSI_AACRAID tristate "Adaptec AACRAID support" depends on SCSI && PCI + help + This driver supports a variety of Dell, HP, Adaptec, IBM and + ICP storage products. For a list of supported products, refer + to <file:Documentation/scsi/aacraid.txt>. + + To compile this driver as a module, choose M here: the module + will be called aacraid. + source "drivers/scsi/aic7xxx/Kconfig.aic7xxx" diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index 320e765fa0c..15dc2e00e1b 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -163,7 +163,7 @@ ncr53c8xx-flags-$(CONFIG_SCSI_ZALON) \ CFLAGS_ncr53c8xx.o := $(ncr53c8xx-flags-y) $(ncr53c8xx-flags-m) zalon7xx-objs := zalon.o ncr53c8xx.o NCR_Q720_mod-objs := NCR_Q720.o ncr53c8xx.o -libata-objs := libata-core.o libata-scsi.o +libata-objs := libata-core.o libata-scsi.o libata-bmdma.o oktagon_esp_mod-objs := oktagon_esp.o oktagon_io.o # Files generated that shall be removed upon make clean diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index 559ff7aae3f..e97ab3e6de4 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -66,6 +66,9 @@ enum { AHCI_IRQ_ON_SG = (1 << 31), AHCI_CMD_ATAPI = (1 << 5), AHCI_CMD_WRITE = (1 << 6), + AHCI_CMD_PREFETCH = (1 << 7), + AHCI_CMD_RESET = (1 << 8), + AHCI_CMD_CLR_BUSY = (1 << 10), RX_FIS_D2H_REG = 0x40, /* offset of D2H Register FIS data */ @@ -85,6 +88,7 @@ enum { /* HOST_CAP bits */ HOST_CAP_64 = (1 << 31), /* PCI DAC (64-bit DMA) support */ + HOST_CAP_CLO = (1 << 24), /* Command List Override support */ /* registers for each SATA port */ PORT_LST_ADDR = 0x00, /* command list DMA addr */ @@ -138,6 +142,7 @@ enum { PORT_CMD_LIST_ON = (1 << 15), /* cmd list DMA engine running */ PORT_CMD_FIS_ON = (1 << 14), /* FIS DMA engine running */ PORT_CMD_FIS_RX = (1 << 4), /* Enable FIS receive DMA engine */ + PORT_CMD_CLO = (1 << 3), /* Command list override */ PORT_CMD_POWER_ON = (1 << 2), /* Power up device */ PORT_CMD_SPIN_UP = (1 << 1), /* Spin up device */ PORT_CMD_START = (1 << 0), /* Enable port DMA engine */ @@ -184,9 +189,9 @@ struct ahci_port_priv { static u32 ahci_scr_read (struct ata_port *ap, unsigned int sc_reg); static void ahci_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); static int ahci_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); -static int ahci_qc_issue(struct ata_queued_cmd *qc); +static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc); static irqreturn_t ahci_interrupt (int irq, void *dev_instance, struct pt_regs *regs); -static void ahci_phy_reset(struct ata_port *ap); +static int ahci_probe_reset(struct ata_port *ap, unsigned int *classes); static void ahci_irq_clear(struct ata_port *ap); static void ahci_eng_timeout(struct ata_port *ap); static int ahci_port_start(struct ata_port *ap); @@ -202,11 +207,11 @@ static struct scsi_host_template ahci_sht = { .name = DRV_NAME, .ioctl = ata_scsi_ioctl, .queuecommand = ata_scsi_queuecmd, + .eh_timed_out = ata_scsi_timed_out, .eh_strategy_handler = ata_scsi_error, .can_queue = ATA_DEF_QUEUE, .this_id = ATA_SHT_THIS_ID, .sg_tablesize = AHCI_MAX_SG, - .max_sectors = ATA_MAX_SECTORS, .cmd_per_lun = ATA_SHT_CMD_PER_LUN, .emulated = ATA_SHT_EMULATED, .use_clustering = AHCI_USE_CLUSTERING, @@ -225,7 +230,7 @@ static const struct ata_port_operations ahci_ops = { .tf_read = ahci_tf_read, - .phy_reset = ahci_phy_reset, + .probe_reset = ahci_probe_reset, .qc_prep = ahci_qc_prep, .qc_issue = ahci_qc_issue, @@ -247,8 +252,7 @@ static const struct ata_port_info ahci_port_info[] = { { .sht = &ahci_sht, .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO | - ATA_FLAG_PIO_DMA, + ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = 0x7f, /* udma0-6 ; FIXME */ .port_ops = &ahci_ops, @@ -450,17 +454,48 @@ static void ahci_scr_write (struct ata_port *ap, unsigned int sc_reg_in, writel(val, (void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); } -static void ahci_phy_reset(struct ata_port *ap) +static int ahci_stop_engine(struct ata_port *ap) { - void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr; - struct ata_taskfile tf; - struct ata_device *dev = &ap->device[0]; - u32 new_tmp, tmp; + void __iomem *mmio = ap->host_set->mmio_base; + void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); + int work; + u32 tmp; - __sata_phy_reset(ap); + tmp = readl(port_mmio + PORT_CMD); + tmp &= ~PORT_CMD_START; + writel(tmp, port_mmio + PORT_CMD); - if (ap->flags & ATA_FLAG_PORT_DISABLED) - return; + /* wait for engine to stop. TODO: this could be + * as long as 500 msec + */ + work = 1000; + while (work-- > 0) { + tmp = readl(port_mmio + PORT_CMD); + if ((tmp & PORT_CMD_LIST_ON) == 0) + return 0; + udelay(10); + } + + return -EIO; +} + +static void ahci_start_engine(struct ata_port *ap) +{ + void __iomem *mmio = ap->host_set->mmio_base; + void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); + u32 tmp; + + tmp = readl(port_mmio + PORT_CMD); + tmp |= PORT_CMD_START; + writel(tmp, port_mmio + PORT_CMD); + readl(port_mmio + PORT_CMD); /* flush */ +} + +static unsigned int ahci_dev_classify(struct ata_port *ap) +{ + void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr; + struct ata_taskfile tf; + u32 tmp; tmp = readl(port_mmio + PORT_SIG); tf.lbah = (tmp >> 24) & 0xff; @@ -468,15 +503,46 @@ static void ahci_phy_reset(struct ata_port *ap) tf.lbal = (tmp >> 8) & 0xff; tf.nsect = (tmp) & 0xff; - dev->class = ata_dev_classify(&tf); - if (!ata_dev_present(dev)) { - ata_port_disable(ap); - return; - } + return ata_dev_classify(&tf); +} + +static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, u32 opts) +{ + pp->cmd_slot[0].opts = cpu_to_le32(opts); + pp->cmd_slot[0].status = 0; + pp->cmd_slot[0].tbl_addr = cpu_to_le32(pp->cmd_tbl_dma & 0xffffffff); + pp->cmd_slot[0].tbl_addr_hi = cpu_to_le32((pp->cmd_tbl_dma >> 16) >> 16); +} + +static int ahci_hardreset(struct ata_port *ap, int verbose, unsigned int *class) +{ + int rc; + + DPRINTK("ENTER\n"); + + ahci_stop_engine(ap); + rc = sata_std_hardreset(ap, verbose, class); + ahci_start_engine(ap); + + if (rc == 0) + *class = ahci_dev_classify(ap); + if (*class == ATA_DEV_UNKNOWN) + *class = ATA_DEV_NONE; + + DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class); + return rc; +} + +static void ahci_postreset(struct ata_port *ap, unsigned int *class) +{ + void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr; + u32 new_tmp, tmp; + + ata_std_postreset(ap, class); /* Make sure port's ATAPI bit is set appropriately */ new_tmp = tmp = readl(port_mmio + PORT_CMD); - if (dev->class == ATA_DEV_ATAPI) + if (*class == ATA_DEV_ATAPI) new_tmp |= PORT_CMD_ATAPI; else new_tmp &= ~PORT_CMD_ATAPI; @@ -486,6 +552,12 @@ static void ahci_phy_reset(struct ata_port *ap) } } +static int ahci_probe_reset(struct ata_port *ap, unsigned int *classes) +{ + return ata_drive_probe_reset(ap, NULL, NULL, ahci_hardreset, + ahci_postreset, classes); +} + static u8 ahci_check_status(struct ata_port *ap) { void __iomem *mmio = (void __iomem *) ap->ioaddr.cmd_addr; @@ -533,42 +605,36 @@ static void ahci_qc_prep(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; struct ahci_port_priv *pp = ap->private_data; + int is_atapi = is_atapi_taskfile(&qc->tf); u32 opts; const u32 cmd_fis_len = 5; /* five dwords */ unsigned int n_elem; /* - * Fill in command slot information (currently only one slot, - * slot 0, is currently since we don't do queueing) - */ - - opts = cmd_fis_len; - if (qc->tf.flags & ATA_TFLAG_WRITE) - opts |= AHCI_CMD_WRITE; - if (is_atapi_taskfile(&qc->tf)) - opts |= AHCI_CMD_ATAPI; - - pp->cmd_slot[0].opts = cpu_to_le32(opts); - pp->cmd_slot[0].status = 0; - pp->cmd_slot[0].tbl_addr = cpu_to_le32(pp->cmd_tbl_dma & 0xffffffff); - pp->cmd_slot[0].tbl_addr_hi = cpu_to_le32((pp->cmd_tbl_dma >> 16) >> 16); - - /* * Fill in command table information. First, the header, * a SATA Register - Host to Device command FIS. */ ata_tf_to_fis(&qc->tf, pp->cmd_tbl, 0); - if (opts & AHCI_CMD_ATAPI) { + if (is_atapi) { memset(pp->cmd_tbl + AHCI_CMD_TBL_CDB, 0, 32); - memcpy(pp->cmd_tbl + AHCI_CMD_TBL_CDB, qc->cdb, ap->cdb_len); + memcpy(pp->cmd_tbl + AHCI_CMD_TBL_CDB, qc->cdb, + qc->dev->cdb_len); } - if (!(qc->flags & ATA_QCFLAG_DMAMAP)) - return; + n_elem = 0; + if (qc->flags & ATA_QCFLAG_DMAMAP) + n_elem = ahci_fill_sg(qc); - n_elem = ahci_fill_sg(qc); + /* + * Fill in command slot information. + */ + opts = cmd_fis_len | n_elem << 16; + if (qc->tf.flags & ATA_TFLAG_WRITE) + opts |= AHCI_CMD_WRITE; + if (is_atapi) + opts |= AHCI_CMD_ATAPI | AHCI_CMD_PREFETCH; - pp->cmd_slot[0].opts |= cpu_to_le32(n_elem << 16); + ahci_fill_cmd_slot(pp, opts); } static void ahci_restart_port(struct ata_port *ap, u32 irq_stat) @@ -576,7 +642,6 @@ static void ahci_restart_port(struct ata_port *ap, u32 irq_stat) void __iomem *mmio = ap->host_set->mmio_base; void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); u32 tmp; - int work; if ((ap->device[0].class != ATA_DEV_ATAPI) || ((irq_stat & PORT_IRQ_TF_ERR) == 0)) @@ -592,20 +657,7 @@ static void ahci_restart_port(struct ata_port *ap, u32 irq_stat) readl(port_mmio + PORT_SCR_ERR)); /* stop DMA */ - tmp = readl(port_mmio + PORT_CMD); - tmp &= ~PORT_CMD_START; - writel(tmp, port_mmio + PORT_CMD); - - /* wait for engine to stop. TODO: this could be - * as long as 500 msec - */ - work = 1000; - while (work-- > 0) { - tmp = readl(port_mmio + PORT_CMD); - if ((tmp & PORT_CMD_LIST_ON) == 0) - break; - udelay(10); - } + ahci_stop_engine(ap); /* clear SATA phy error, if any */ tmp = readl(port_mmio + PORT_SCR_ERR); @@ -624,10 +676,7 @@ static void ahci_restart_port(struct ata_port *ap, u32 irq_stat) } /* re-start DMA */ - tmp = readl(port_mmio + PORT_CMD); - tmp |= PORT_CMD_START; - writel(tmp, port_mmio + PORT_CMD); - readl(port_mmio + PORT_CMD); /* flush */ + ahci_start_engine(ap); } static void ahci_eng_timeout(struct ata_port *ap) @@ -642,25 +691,13 @@ static void ahci_eng_timeout(struct ata_port *ap) spin_lock_irqsave(&host_set->lock, flags); + ahci_restart_port(ap, readl(port_mmio + PORT_IRQ_STAT)); qc = ata_qc_from_tag(ap, ap->active_tag); - if (!qc) { - printk(KERN_ERR "ata%u: BUG: timeout without command\n", - ap->id); - } else { - ahci_restart_port(ap, readl(port_mmio + PORT_IRQ_STAT)); - - /* hack alert! We cannot use the supplied completion - * function from inside the ->eh_strategy_handler() thread. - * libata is the only user of ->eh_strategy_handler() in - * any kernel, so the default scsi_done() assumes it is - * not being called from the SCSI EH. - */ - qc->scsidone = scsi_finish_command; - qc->err_mask |= AC_ERR_OTHER; - ata_qc_complete(qc); - } + qc->err_mask |= AC_ERR_TIMEOUT; spin_unlock_irqrestore(&host_set->lock, flags); + + ata_eh_qc_complete(qc); } static inline int ahci_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc) @@ -678,7 +715,7 @@ static inline int ahci_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc) ci = readl(port_mmio + PORT_CMD_ISSUE); if (likely((ci & 0x1) == 0)) { if (qc) { - assert(qc->err_mask == 0); + WARN_ON(qc->err_mask); ata_qc_complete(qc); qc = NULL; } @@ -697,7 +734,7 @@ static inline int ahci_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc) ahci_restart_port(ap, status); if (qc) { - qc->err_mask |= AC_ERR_OTHER; + qc->err_mask |= err_mask; ata_qc_complete(qc); } } @@ -770,7 +807,7 @@ static irqreturn_t ahci_interrupt (int irq, void *dev_instance, struct pt_regs * return IRQ_RETVAL(handled); } -static int ahci_qc_issue(struct ata_queued_cmd *qc) +static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr; diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index fc3ca051cee..9327b62f97d 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -101,36 +101,54 @@ enum { ICH5_PCS = 0x92, /* port control and status */ PIIX_SCC = 0x0A, /* sub-class code register */ - PIIX_FLAG_AHCI = (1 << 28), /* AHCI possible */ - PIIX_FLAG_CHECKINTR = (1 << 29), /* make sure PCI INTx enabled */ - PIIX_FLAG_COMBINED = (1 << 30), /* combined mode possible */ + PIIX_FLAG_IGNORE_PCS = (1 << 25), /* ignore PCS present bits */ + PIIX_FLAG_SCR = (1 << 26), /* SCR available */ + PIIX_FLAG_AHCI = (1 << 27), /* AHCI possible */ + PIIX_FLAG_CHECKINTR = (1 << 28), /* make sure PCI INTx enabled */ + PIIX_FLAG_COMBINED = (1 << 29), /* combined mode possible */ + /* ICH6/7 use different scheme for map value */ + PIIX_FLAG_COMBINED_ICH6 = PIIX_FLAG_COMBINED | (1 << 30), /* combined mode. if set, PATA is channel 0. * if clear, PATA is channel 1. */ - PIIX_COMB_PATA_P0 = (1 << 1), - PIIX_COMB = (1 << 2), /* combined mode enabled? */ - PIIX_PORT_ENABLED = (1 << 0), PIIX_PORT_PRESENT = (1 << 4), PIIX_80C_PRI = (1 << 5) | (1 << 4), PIIX_80C_SEC = (1 << 7) | (1 << 6), - ich5_pata = 0, - ich5_sata = 1, - piix4_pata = 2, - ich6_sata = 3, - ich6_sata_ahci = 4, + /* controller IDs */ + piix4_pata = 0, + ich5_pata = 1, + ich5_sata = 2, + esb_sata = 3, + ich6_sata = 4, + ich6_sata_ahci = 5, + ich6m_sata_ahci = 6, + + /* constants for mapping table */ + P0 = 0, /* port 0 */ + P1 = 1, /* port 1 */ + P2 = 2, /* port 2 */ + P3 = 3, /* port 3 */ + IDE = -1, /* IDE */ + NA = -2, /* not avaliable */ + RV = -3, /* reserved */ PIIX_AHCI_DEVICE = 6, }; +struct piix_map_db { + const u32 mask; + const int map[][4]; +}; + static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); -static void piix_pata_phy_reset(struct ata_port *ap); -static void piix_sata_phy_reset(struct ata_port *ap); +static int piix_pata_probe_reset(struct ata_port *ap, unsigned int *classes); +static int piix_sata_probe_reset(struct ata_port *ap, unsigned int *classes); static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev); static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev); @@ -147,19 +165,32 @@ static const struct pci_device_id piix_pci_tbl[] = { * list in drivers/pci/quirks.c. */ + /* 82801EB (ICH5) */ { 0x8086, 0x24d1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_sata }, + /* 82801EB (ICH5) */ { 0x8086, 0x24df, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_sata }, - { 0x8086, 0x25a3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_sata }, - { 0x8086, 0x25b0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_sata }, + /* 6300ESB (ICH5 variant with broken PCS present bits) */ + { 0x8086, 0x25a3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, esb_sata }, + /* 6300ESB pretending RAID */ + { 0x8086, 0x25b0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, esb_sata }, + /* 82801FB/FW (ICH6/ICH6W) */ { 0x8086, 0x2651, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata }, + /* 82801FR/FRW (ICH6R/ICH6RW) */ { 0x8086, 0x2652, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci }, - { 0x8086, 0x2653, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci }, + /* 82801FBM ICH6M (ICH6R with only port 0 and 2 implemented) */ + { 0x8086, 0x2653, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6m_sata_ahci }, + /* 82801GB/GR/GH (ICH7, identical to ICH6) */ { 0x8086, 0x27c0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci }, - { 0x8086, 0x27c4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci }, + /* 2801GBM/GHM (ICH7M, identical to ICH6M) */ + { 0x8086, 0x27c4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6m_sata_ahci }, + /* Enterprise Southbridge 2 (where's the datasheet?) */ { 0x8086, 0x2680, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci }, + /* SATA Controller 1 IDE (ICH8, no datasheet yet) */ { 0x8086, 0x2820, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci }, + /* SATA Controller 2 IDE (ICH8, ditto) */ { 0x8086, 0x2825, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci }, - { 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci }, + /* Mobile SATA Controller IDE (ICH8M, ditto) */ + { 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6m_sata_ahci }, { } /* terminate list */ }; @@ -178,11 +209,11 @@ static struct scsi_host_template piix_sht = { .name = DRV_NAME, .ioctl = ata_scsi_ioctl, .queuecommand = ata_scsi_queuecmd, + .eh_timed_out = ata_scsi_timed_out, .eh_strategy_handler = ata_scsi_error, .can_queue = ATA_DEF_QUEUE, .this_id = ATA_SHT_THIS_ID, .sg_tablesize = LIBATA_MAX_PRD, - .max_sectors = ATA_MAX_SECTORS, .cmd_per_lun = ATA_SHT_CMD_PER_LUN, .emulated = ATA_SHT_EMULATED, .use_clustering = ATA_SHT_USE_CLUSTERING, @@ -205,7 +236,7 @@ static const struct ata_port_operations piix_pata_ops = { .exec_command = ata_exec_command, .dev_select = ata_std_dev_select, - .phy_reset = piix_pata_phy_reset, + .probe_reset = piix_pata_probe_reset, .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, @@ -233,7 +264,7 @@ static const struct ata_port_operations piix_sata_ops = { .exec_command = ata_exec_command, .dev_select = ata_std_dev_select, - .phy_reset = piix_sata_phy_reset, + .probe_reset = piix_sata_probe_reset, .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, @@ -252,12 +283,62 @@ static const struct ata_port_operations piix_sata_ops = { .host_stop = ata_host_stop, }; +static struct piix_map_db ich5_map_db = { + .mask = 0x7, + .map = { + /* PM PS SM SS MAP */ + { P0, NA, P1, NA }, /* 000b */ + { P1, NA, P0, NA }, /* 001b */ + { RV, RV, RV, RV }, + { RV, RV, RV, RV }, + { P0, P1, IDE, IDE }, /* 100b */ + { P1, P0, IDE, IDE }, /* 101b */ + { IDE, IDE, P0, P1 }, /* 110b */ + { IDE, IDE, P1, P0 }, /* 111b */ + }, +}; + +static struct piix_map_db ich6_map_db = { + .mask = 0x3, + .map = { + /* PM PS SM SS MAP */ + { P0, P1, P2, P3 }, /* 00b */ + { IDE, IDE, P1, P3 }, /* 01b */ + { P0, P2, IDE, IDE }, /* 10b */ + { RV, RV, RV, RV }, + }, +}; + +static struct piix_map_db ich6m_map_db = { + .mask = 0x3, + .map = { + /* PM PS SM SS MAP */ + { P0, P1, P2, P3 }, /* 00b */ + { RV, RV, RV, RV }, + { P0, P2, IDE, IDE }, /* 10b */ + { RV, RV, RV, RV }, + }, +}; + static struct ata_port_info piix_port_info[] = { + /* piix4_pata */ + { + .sht = &piix_sht, + .host_flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = 0x1f, /* pio0-4 */ +#if 0 + .mwdma_mask = 0x06, /* mwdma1-2 */ +#else + .mwdma_mask = 0x00, /* mwdma broken */ +#endif + .udma_mask = ATA_UDMA_MASK_40C, + .port_ops = &piix_pata_ops, + }, + /* ich5_pata */ { .sht = &piix_sht, - .host_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | - PIIX_FLAG_CHECKINTR, + .host_flags = ATA_FLAG_SLAVE_POSS | PIIX_FLAG_CHECKINTR, .pio_mask = 0x1f, /* pio0-4 */ #if 0 .mwdma_mask = 0x06, /* mwdma1-2 */ @@ -271,50 +352,63 @@ static struct ata_port_info piix_port_info[] = { /* ich5_sata */ { .sht = &piix_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_SRST | - PIIX_FLAG_COMBINED | PIIX_FLAG_CHECKINTR, + .host_flags = ATA_FLAG_SATA | PIIX_FLAG_COMBINED | + PIIX_FLAG_CHECKINTR, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x7f, /* udma0-6 */ .port_ops = &piix_sata_ops, + .private_data = &ich5_map_db, }, - /* piix4_pata */ + /* i6300esb_sata */ { .sht = &piix_sht, - .host_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .host_flags = ATA_FLAG_SATA | PIIX_FLAG_COMBINED | + PIIX_FLAG_CHECKINTR | PIIX_FLAG_IGNORE_PCS, .pio_mask = 0x1f, /* pio0-4 */ -#if 0 - .mwdma_mask = 0x06, /* mwdma1-2 */ -#else - .mwdma_mask = 0x00, /* mwdma broken */ -#endif - .udma_mask = ATA_UDMA_MASK_40C, - .port_ops = &piix_pata_ops, + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x7f, /* udma0-6 */ + .port_ops = &piix_sata_ops, + .private_data = &ich5_map_db, }, /* ich6_sata */ { .sht = &piix_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_SRST | - PIIX_FLAG_COMBINED | PIIX_FLAG_CHECKINTR | - ATA_FLAG_SLAVE_POSS, + .host_flags = ATA_FLAG_SATA | PIIX_FLAG_COMBINED_ICH6 | + PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x7f, /* udma0-6 */ .port_ops = &piix_sata_ops, + .private_data = &ich6_map_db, }, /* ich6_sata_ahci */ { .sht = &piix_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_SRST | - PIIX_FLAG_COMBINED | PIIX_FLAG_CHECKINTR | - ATA_FLAG_SLAVE_POSS | PIIX_FLAG_AHCI, + .host_flags = ATA_FLAG_SATA | PIIX_FLAG_COMBINED_ICH6 | + PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR | + PIIX_FLAG_AHCI, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x7f, /* udma0-6 */ + .port_ops = &piix_sata_ops, + .private_data = &ich6_map_db, + }, + + /* ich6m_sata_ahci */ + { + .sht = &piix_sht, + .host_flags = ATA_FLAG_SATA | PIIX_FLAG_COMBINED_ICH6 | + PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR | + PIIX_FLAG_AHCI, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x7f, /* udma0-6 */ .port_ops = &piix_sata_ops, + .private_data = &ich6m_map_db, }, }; @@ -363,102 +457,123 @@ cbl40: } /** - * piix_pata_phy_reset - Probe specified port on PATA host controller - * @ap: Port to probe + * piix_pata_probeinit - probeinit for PATA host controller + * @ap: Target port * - * Probe PATA phy. + * Probeinit including cable detection. * * LOCKING: * None (inherited from caller). */ +static void piix_pata_probeinit(struct ata_port *ap) +{ + piix_pata_cbl_detect(ap); + ata_std_probeinit(ap); +} -static void piix_pata_phy_reset(struct ata_port *ap) +/** + * piix_pata_probe_reset - Perform reset on PATA port and classify + * @ap: Port to reset + * @classes: Resulting classes of attached devices + * + * Reset PATA phy and classify attached devices. + * + * LOCKING: + * None (inherited from caller). + */ +static int piix_pata_probe_reset(struct ata_port *ap, unsigned int *classes) { struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->hard_port_no])) { - ata_port_disable(ap); printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id); - return; + return 0; } - piix_pata_cbl_detect(ap); - - ata_port_probe(ap); - - ata_bus_reset(ap); + return ata_drive_probe_reset(ap, piix_pata_probeinit, + ata_std_softreset, NULL, + ata_std_postreset, classes); } /** * piix_sata_probe - Probe PCI device for present SATA devices * @ap: Port associated with the PCI device we wish to probe * - * Reads SATA PCI device's PCI config register Port Configuration - * and Status (PCS) to determine port and device availability. + * Reads and configures SATA PCI device's PCI config register + * Port Configuration and Status (PCS) to determine port and + * device availability. * * LOCKING: * None (inherited from caller). * * RETURNS: - * Non-zero if port is enabled, it may or may not have a device - * attached in that case (PRESENT bit would only be set if BIOS probe - * was done). Zero is returned if port is disabled. + * Mask of avaliable devices on the port. */ -static int piix_sata_probe (struct ata_port *ap) +static unsigned int piix_sata_probe (struct ata_port *ap) { struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); - int combined = (ap->flags & ATA_FLAG_SLAVE_POSS); - int orig_mask, mask, i; + const unsigned int *map = ap->host_set->private_data; + int base = 2 * ap->hard_port_no; + unsigned int present_mask = 0; + int port, i; u8 pcs; - mask = (PIIX_PORT_PRESENT << ap->hard_port_no) | - (PIIX_PORT_ENABLED << ap->hard_port_no); - pci_read_config_byte(pdev, ICH5_PCS, &pcs); - orig_mask = (int) pcs & 0xff; - - /* TODO: this is vaguely wrong for ICH6 combined mode, - * where only two of the four SATA ports are mapped - * onto a single ATA channel. It is also vaguely inaccurate - * for ICH5, which has only two ports. However, this is ok, - * as further device presence detection code will handle - * any false positives produced here. - */ + DPRINTK("ata%u: ENTER, pcs=0x%x base=%d\n", ap->id, pcs, base); - for (i = 0; i < 4; i++) { - mask = (PIIX_PORT_ENABLED << i); + /* enable all ports on this ap and wait for them to settle */ + for (i = 0; i < 2; i++) { + port = map[base + i]; + if (port >= 0) + pcs |= 1 << port; + } + + pci_write_config_byte(pdev, ICH5_PCS, pcs); + msleep(100); - if ((orig_mask & mask) == mask) - if (combined || (i == ap->hard_port_no)) - return 1; + /* let's see which devices are present */ + pci_read_config_byte(pdev, ICH5_PCS, &pcs); + + for (i = 0; i < 2; i++) { + port = map[base + i]; + if (port < 0) + continue; + if (ap->flags & PIIX_FLAG_IGNORE_PCS || pcs & 1 << (4 + port)) + present_mask |= 1 << i; + else + pcs &= ~(1 << port); } - return 0; + /* disable offline ports on non-AHCI controllers */ + if (!(ap->flags & PIIX_FLAG_AHCI)) + pci_write_config_byte(pdev, ICH5_PCS, pcs); + + DPRINTK("ata%u: LEAVE, pcs=0x%x present_mask=0x%x\n", + ap->id, pcs, present_mask); + + return present_mask; } /** - * piix_sata_phy_reset - Probe specified port on SATA host controller - * @ap: Port to probe + * piix_sata_probe_reset - Perform reset on SATA port and classify + * @ap: Port to reset + * @classes: Resulting classes of attached devices * - * Probe SATA phy. + * Reset SATA phy and classify attached devices. * * LOCKING: * None (inherited from caller). */ - -static void piix_sata_phy_reset(struct ata_port *ap) +static int piix_sata_probe_reset(struct ata_port *ap, unsigned int *classes) { if (!piix_sata_probe(ap)) { - ata_port_disable(ap); printk(KERN_INFO "ata%u: SATA port has no device.\n", ap->id); - return; + return 0; } - ap->cbl = ATA_CBL_SATA; - - ata_port_probe(ap); - - ata_bus_reset(ap); + return ata_drive_probe_reset(ap, ata_std_probeinit, + ata_std_softreset, NULL, + ata_std_postreset, classes); } /** @@ -627,6 +742,7 @@ static int piix_disable_ahci(struct pci_dev *pdev) /** * piix_check_450nx_errata - Check for problem 450NX setup + * @ata_dev: the PCI device to check * * Check for the present of 450NX errata #19 and errata #25. If * they are found return an error code so we can turn off DMA @@ -659,6 +775,54 @@ static int __devinit piix_check_450nx_errata(struct pci_dev *ata_dev) return no_piix_dma; } +static void __devinit piix_init_sata_map(struct pci_dev *pdev, + struct ata_port_info *pinfo) +{ + struct piix_map_db *map_db = pinfo[0].private_data; + const unsigned int *map; + int i, invalid_map = 0; + u8 map_value; + + pci_read_config_byte(pdev, ICH5_PMR, &map_value); + + map = map_db->map[map_value & map_db->mask]; + + dev_printk(KERN_INFO, &pdev->dev, "MAP ["); + for (i = 0; i < 4; i++) { + switch (map[i]) { + case RV: + invalid_map = 1; + printk(" XX"); + break; + + case NA: + printk(" --"); + break; + + case IDE: + WARN_ON((i & 1) || map[i + 1] != IDE); + pinfo[i / 2] = piix_port_info[ich5_pata]; + i++; + printk(" IDE IDE"); + break; + + default: + printk(" P%d", map[i]); + if (i & 1) + pinfo[i / 2].host_flags |= ATA_FLAG_SLAVE_POSS; + break; + } + } + printk(" ]\n"); + + if (invalid_map) + dev_printk(KERN_ERR, &pdev->dev, + "invalid MAP value %u\n", map_value); + + pinfo[0].private_data = (void *)map; + pinfo[1].private_data = (void *)map; +} + /** * piix_init_one - Register PIIX ATA PCI device with kernel services * @pdev: PCI device to register @@ -677,9 +841,9 @@ static int __devinit piix_check_450nx_errata(struct pci_dev *ata_dev) static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version; - struct ata_port_info *port_info[2]; - unsigned int combined = 0; - unsigned int pata_chan = 0, sata_chan = 0; + struct ata_port_info port_info[2]; + struct ata_port_info *ppinfo[2] = { &port_info[0], &port_info[1] }; + unsigned long host_flags; if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, @@ -689,10 +853,12 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) if (!in_module_init) return -ENODEV; - port_info[0] = &piix_port_info[ent->driver_data]; - port_info[1] = &piix_port_info[ent->driver_data]; + port_info[0] = piix_port_info[ent->driver_data]; + port_info[1] = piix_port_info[ent->driver_data]; + + host_flags = port_info[0].host_flags; - if (port_info[0]->host_flags & PIIX_FLAG_AHCI) { + if (host_flags & PIIX_FLAG_AHCI) { u8 tmp; pci_read_config_byte(pdev, PIIX_SCC, &tmp); if (tmp == PIIX_AHCI_DEVICE) { @@ -702,18 +868,9 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) } } - if (port_info[0]->host_flags & PIIX_FLAG_COMBINED) { - u8 tmp; - pci_read_config_byte(pdev, ICH5_PMR, &tmp); - - if (tmp & PIIX_COMB) { - combined = 1; - if (tmp & PIIX_COMB_PATA_P0) - sata_chan = 1; - else - pata_chan = 1; - } - } + /* Initialize SATA map */ + if (host_flags & ATA_FLAG_SATA) + piix_init_sata_map(pdev, port_info); /* On ICH5, some BIOSen disable the interrupt using the * PCI_COMMAND_INTX_DISABLE bit added in PCI 2.3. @@ -721,28 +878,19 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) * MSI is disabled (and it is disabled, as we don't use * message-signalled interrupts currently). */ - if (port_info[0]->host_flags & PIIX_FLAG_CHECKINTR) + if (host_flags & PIIX_FLAG_CHECKINTR) pci_intx(pdev, 1); - if (combined) { - port_info[sata_chan] = &piix_port_info[ent->driver_data]; - port_info[sata_chan]->host_flags |= ATA_FLAG_SLAVE_POSS; - port_info[pata_chan] = &piix_port_info[ich5_pata]; - - dev_printk(KERN_WARNING, &pdev->dev, - "combined mode detected (p=%u, s=%u)\n", - pata_chan, sata_chan); - } if (piix_check_450nx_errata(pdev)) { /* This writes into the master table but it does not really matter for this errata as we will apply it to all the PIIX devices on the board */ - port_info[0]->mwdma_mask = 0; - port_info[0]->udma_mask = 0; - port_info[1]->mwdma_mask = 0; - port_info[1]->udma_mask = 0; + port_info[0].mwdma_mask = 0; + port_info[0].udma_mask = 0; + port_info[1].mwdma_mask = 0; + port_info[1].udma_mask = 0; } - return ata_pci_init_one(pdev, port_info, 2); + return ata_pci_init_one(pdev, ppinfo, 2); } static int __init piix_init(void) diff --git a/drivers/scsi/libata-bmdma.c b/drivers/scsi/libata-bmdma.c new file mode 100644 index 00000000000..a93336adcd2 --- /dev/null +++ b/drivers/scsi/libata-bmdma.c @@ -0,0 +1,703 @@ +/* + * libata-bmdma.c - helper library for PCI IDE BMDMA + * + * Maintained by: Jeff Garzik <jgarzik@pobox.com> + * Please ALWAYS copy linux-ide@vger.kernel.org + * on emails. + * + * Copyright 2003-2006 Red Hat, Inc. All rights reserved. + * Copyright 2003-2006 Jeff Garzik + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * Hardware documentation available from http://www.t13.org/ and + * http://www.sata-io.org/ + * + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/libata.h> + +#include "libata.h" + +/** + * ata_tf_load_pio - send taskfile registers to host controller + * @ap: Port to which output is sent + * @tf: ATA taskfile register set + * + * Outputs ATA taskfile to standard ATA host controller. + * + * LOCKING: + * Inherited from caller. + */ + +static void ata_tf_load_pio(struct ata_port *ap, const struct ata_taskfile *tf) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; + + if (tf->ctl != ap->last_ctl) { + outb(tf->ctl, ioaddr->ctl_addr); + ap->last_ctl = tf->ctl; + ata_wait_idle(ap); + } + + if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { + outb(tf->hob_feature, ioaddr->feature_addr); + outb(tf->hob_nsect, ioaddr->nsect_addr); + outb(tf->hob_lbal, ioaddr->lbal_addr); + outb(tf->hob_lbam, ioaddr->lbam_addr); + outb(tf->hob_lbah, ioaddr->lbah_addr); + VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n", + tf->hob_feature, + tf->hob_nsect, + tf->hob_lbal, + tf->hob_lbam, + tf->hob_lbah); + } + + if (is_addr) { + outb(tf->feature, ioaddr->feature_addr); + outb(tf->nsect, ioaddr->nsect_addr); + outb(tf->lbal, ioaddr->lbal_addr); + outb(tf->lbam, ioaddr->lbam_addr); + outb(tf->lbah, ioaddr->lbah_addr); + VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n", + tf->feature, + tf->nsect, + tf->lbal, + tf->lbam, + tf->lbah); + } + + if (tf->flags & ATA_TFLAG_DEVICE) { + outb(tf->device, ioaddr->device_addr); + VPRINTK("device 0x%X\n", tf->device); + } + + ata_wait_idle(ap); +} + +/** + * ata_tf_load_mmio - send taskfile registers to host controller + * @ap: Port to which output is sent + * @tf: ATA taskfile register set + * + * Outputs ATA taskfile to standard ATA host controller using MMIO. + * + * LOCKING: + * Inherited from caller. + */ + +static void ata_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; + + if (tf->ctl != ap->last_ctl) { + writeb(tf->ctl, (void __iomem *) ap->ioaddr.ctl_addr); + ap->last_ctl = tf->ctl; + ata_wait_idle(ap); + } + + if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { + writeb(tf->hob_feature, (void __iomem *) ioaddr->feature_addr); + writeb(tf->hob_nsect, (void __iomem *) ioaddr->nsect_addr); + writeb(tf->hob_lbal, (void __iomem *) ioaddr->lbal_addr); + writeb(tf->hob_lbam, (void __iomem *) ioaddr->lbam_addr); + writeb(tf->hob_lbah, (void __iomem *) ioaddr->lbah_addr); + VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n", + tf->hob_feature, + tf->hob_nsect, + tf->hob_lbal, + tf->hob_lbam, + tf->hob_lbah); + } + + if (is_addr) { + writeb(tf->feature, (void __iomem *) ioaddr->feature_addr); + writeb(tf->nsect, (void __iomem *) ioaddr->nsect_addr); + writeb(tf->lbal, (void __iomem *) ioaddr->lbal_addr); + writeb(tf->lbam, (void __iomem *) ioaddr->lbam_addr); + writeb(tf->lbah, (void __iomem *) ioaddr->lbah_addr); + VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n", + tf->feature, + tf->nsect, + tf->lbal, + tf->lbam, + tf->lbah); + } + + if (tf->flags & ATA_TFLAG_DEVICE) { + writeb(tf->device, (void __iomem *) ioaddr->device_addr); + VPRINTK("device 0x%X\n", tf->device); + } + + ata_wait_idle(ap); +} + + +/** + * ata_tf_load - send taskfile registers to host controller + * @ap: Port to which output is sent + * @tf: ATA taskfile register set + * + * Outputs ATA taskfile to standard ATA host controller using MMIO + * or PIO as indicated by the ATA_FLAG_MMIO flag. + * Writes the control, feature, nsect, lbal, lbam, and lbah registers. + * Optionally (ATA_TFLAG_LBA48) writes hob_feature, hob_nsect, + * hob_lbal, hob_lbam, and hob_lbah. + * + * This function waits for idle (!BUSY and !DRQ) after writing + * registers. If the control register has a new value, this + * function also waits for idle after writing control and before + * writing the remaining registers. + * + * May be used as the tf_load() entry in ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ +void ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) +{ + if (ap->flags & ATA_FLAG_MMIO) + ata_tf_load_mmio(ap, tf); + else + ata_tf_load_pio(ap, tf); +} + +/** + * ata_exec_command_pio - issue ATA command to host controller + * @ap: port to which command is being issued + * @tf: ATA taskfile register set + * + * Issues PIO write to ATA command register, with proper + * synchronization with interrupt handler / other threads. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + +static void ata_exec_command_pio(struct ata_port *ap, const struct ata_taskfile *tf) +{ + DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command); + + outb(tf->command, ap->ioaddr.command_addr); + ata_pause(ap); +} + + +/** + * ata_exec_command_mmio - issue ATA command to host controller + * @ap: port to which command is being issued + * @tf: ATA taskfile register set + * + * Issues MMIO write to ATA command register, with proper + * synchronization with interrupt handler / other threads. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + +static void ata_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf) +{ + DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command); + + writeb(tf->command, (void __iomem *) ap->ioaddr.command_addr); + ata_pause(ap); +} + + +/** + * ata_exec_command - issue ATA command to host controller + * @ap: port to which command is being issued + * @tf: ATA taskfile register set + * + * Issues PIO/MMIO write to ATA command register, with proper + * synchronization with interrupt handler / other threads. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ +void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf) +{ + if (ap->flags & ATA_FLAG_MMIO) + ata_exec_command_mmio(ap, tf); + else + ata_exec_command_pio(ap, tf); +} + +/** + * ata_tf_read_pio - input device's ATA taskfile shadow registers + * @ap: Port from which input is read + * @tf: ATA taskfile register set for storing input + * + * Reads ATA taskfile registers for currently-selected device + * into @tf. + * + * LOCKING: + * Inherited from caller. + */ + +static void ata_tf_read_pio(struct ata_port *ap, struct ata_taskfile *tf) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + + tf->command = ata_check_status(ap); + tf->feature = inb(ioaddr->error_addr); + tf->nsect = inb(ioaddr->nsect_addr); + tf->lbal = inb(ioaddr->lbal_addr); + tf->lbam = inb(ioaddr->lbam_addr); + tf->lbah = inb(ioaddr->lbah_addr); + tf->device = inb(ioaddr->device_addr); + + if (tf->flags & ATA_TFLAG_LBA48) { + outb(tf->ctl | ATA_HOB, ioaddr->ctl_addr); + tf->hob_feature = inb(ioaddr->error_addr); + tf->hob_nsect = inb(ioaddr->nsect_addr); + tf->hob_lbal = inb(ioaddr->lbal_addr); + tf->hob_lbam = inb(ioaddr->lbam_addr); + tf->hob_lbah = inb(ioaddr->lbah_addr); + } +} + +/** + * ata_tf_read_mmio - input device's ATA taskfile shadow registers + * @ap: Port from which input is read + * @tf: ATA taskfile register set for storing input + * + * Reads ATA taskfile registers for currently-selected device + * into @tf via MMIO. + * + * LOCKING: + * Inherited from caller. + */ + +static void ata_tf_read_mmio(struct ata_port *ap, struct ata_taskfile *tf) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + + tf->command = ata_check_status(ap); + tf->feature = readb((void __iomem *)ioaddr->error_addr); + tf->nsect = readb((void __iomem *)ioaddr->nsect_addr); + tf->lbal = readb((void __iomem *)ioaddr->lbal_addr); + tf->lbam = readb((void __iomem *)ioaddr->lbam_addr); + tf->lbah = readb((void __iomem *)ioaddr->lbah_addr); + tf->device = readb((void __iomem *)ioaddr->device_addr); + + if (tf->flags & ATA_TFLAG_LBA48) { + writeb(tf->ctl | ATA_HOB, (void __iomem *) ap->ioaddr.ctl_addr); + tf->hob_feature = readb((void __iomem *)ioaddr->error_addr); + tf->hob_nsect = readb((void __iomem *)ioaddr->nsect_addr); + tf->hob_lbal = readb((void __iomem *)ioaddr->lbal_addr); + tf->hob_lbam = readb((void __iomem *)ioaddr->lbam_addr); + tf->hob_lbah = readb((void __iomem *)ioaddr->lbah_addr); + } +} + + +/** + * ata_tf_read - input device's ATA taskfile shadow registers + * @ap: Port from which input is read + * @tf: ATA taskfile register set for storing input + * + * Reads ATA taskfile registers for currently-selected device + * into @tf. + * + * Reads nsect, lbal, lbam, lbah, and device. If ATA_TFLAG_LBA48 + * is set, also reads the hob registers. + * + * May be used as the tf_read() entry in ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ +void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf) +{ + if (ap->flags & ATA_FLAG_MMIO) + ata_tf_read_mmio(ap, tf); + else + ata_tf_read_pio(ap, tf); +} + +/** + * ata_check_status_pio - Read device status reg & clear interrupt + * @ap: port where the device is + * + * Reads ATA taskfile status register for currently-selected device + * and return its value. This also clears pending interrupts + * from this device + * + * LOCKING: + * Inherited from caller. + */ +static u8 ata_check_status_pio(struct ata_port *ap) +{ + return inb(ap->ioaddr.status_addr); +} + +/** + * ata_check_status_mmio - Read device status reg & clear interrupt + * @ap: port where the device is + * + * Reads ATA taskfile status register for currently-selected device + * via MMIO and return its value. This also clears pending interrupts + * from this device + * + * LOCKING: + * Inherited from caller. + */ +static u8 ata_check_status_mmio(struct ata_port *ap) +{ + return readb((void __iomem *) ap->ioaddr.status_addr); +} + + +/** + * ata_check_status - Read device status reg & clear interrupt + * @ap: port where the device is + * + * Reads ATA taskfile status register for currently-selected device + * and return its value. This also clears pending interrupts + * from this device + * + * May be used as the check_status() entry in ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ +u8 ata_check_status(struct ata_port *ap) +{ + if (ap->flags & ATA_FLAG_MMIO) + return ata_check_status_mmio(ap); + return ata_check_status_pio(ap); +} + + +/** + * ata_altstatus - Read device alternate status reg + * @ap: port where the device is + * + * Reads ATA taskfile alternate status register for + * currently-selected device and return its value. + * + * Note: may NOT be used as the check_altstatus() entry in + * ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ +u8 ata_altstatus(struct ata_port *ap) +{ + if (ap->ops->check_altstatus) + return ap->ops->check_altstatus(ap); + + if (ap->flags & ATA_FLAG_MMIO) + return readb((void __iomem *)ap->ioaddr.altstatus_addr); + return inb(ap->ioaddr.altstatus_addr); +} + +#ifdef CONFIG_PCI +static struct ata_probe_ent * +ata_probe_ent_alloc(struct device *dev, const struct ata_port_info *port) +{ + struct ata_probe_ent *probe_ent; + + probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL); + if (!probe_ent) { + printk(KERN_ERR DRV_NAME "(%s): out of memory\n", + kobject_name(&(dev->kobj))); + return NULL; + } + + INIT_LIST_HEAD(&probe_ent->node); + probe_ent->dev = dev; + + probe_ent->sht = port->sht; + probe_ent->host_flags = port->host_flags; + probe_ent->pio_mask = port->pio_mask; + probe_ent->mwdma_mask = port->mwdma_mask; + probe_ent->udma_mask = port->udma_mask; + probe_ent->port_ops = port->port_ops; + + return probe_ent; +} + + +/** + * ata_pci_init_native_mode - Initialize native-mode driver + * @pdev: pci device to be initialized + * @port: array[2] of pointers to port info structures. + * @ports: bitmap of ports present + * + * Utility function which allocates and initializes an + * ata_probe_ent structure for a standard dual-port + * PIO-based IDE controller. The returned ata_probe_ent + * structure can be passed to ata_device_add(). The returned + * ata_probe_ent structure should then be freed with kfree(). + * + * The caller need only pass the address of the primary port, the + * secondary will be deduced automatically. If the device has non + * standard secondary port mappings this function can be called twice, + * once for each interface. + */ + +struct ata_probe_ent * +ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int ports) +{ + struct ata_probe_ent *probe_ent = + ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]); + int p = 0; + + if (!probe_ent) + return NULL; + + probe_ent->irq = pdev->irq; + probe_ent->irq_flags = SA_SHIRQ; + probe_ent->private_data = port[0]->private_data; + + if (ports & ATA_PORT_PRIMARY) { + probe_ent->port[p].cmd_addr = pci_resource_start(pdev, 0); + probe_ent->port[p].altstatus_addr = + probe_ent->port[p].ctl_addr = + pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS; + probe_ent->port[p].bmdma_addr = pci_resource_start(pdev, 4); + ata_std_ports(&probe_ent->port[p]); + p++; + } + + if (ports & ATA_PORT_SECONDARY) { + probe_ent->port[p].cmd_addr = pci_resource_start(pdev, 2); + probe_ent->port[p].altstatus_addr = + probe_ent->port[p].ctl_addr = + pci_resource_start(pdev, 3) | ATA_PCI_CTL_OFS; + probe_ent->port[p].bmdma_addr = pci_resource_start(pdev, 4) + 8; + ata_std_ports(&probe_ent->port[p]); + p++; + } + + probe_ent->n_ports = p; + return probe_ent; +} + + +static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev, + struct ata_port_info *port, int port_num) +{ + struct ata_probe_ent *probe_ent; + + probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port); + if (!probe_ent) + return NULL; + + probe_ent->legacy_mode = 1; + probe_ent->n_ports = 1; + probe_ent->hard_port_no = port_num; + probe_ent->private_data = port->private_data; + + switch(port_num) + { + case 0: + probe_ent->irq = 14; + probe_ent->port[0].cmd_addr = 0x1f0; + probe_ent->port[0].altstatus_addr = + probe_ent->port[0].ctl_addr = 0x3f6; + break; + case 1: + probe_ent->irq = 15; + probe_ent->port[0].cmd_addr = 0x170; + probe_ent->port[0].altstatus_addr = + probe_ent->port[0].ctl_addr = 0x376; + break; + } + + probe_ent->port[0].bmdma_addr = + pci_resource_start(pdev, 4) + 8 * port_num; + ata_std_ports(&probe_ent->port[0]); + + return probe_ent; +} + + +/** + * ata_pci_init_one - Initialize/register PCI IDE host controller + * @pdev: Controller to be initialized + * @port_info: Information from low-level host driver + * @n_ports: Number of ports attached to host controller + * + * This is a helper function which can be called from a driver's + * xxx_init_one() probe function if the hardware uses traditional + * IDE taskfile registers. + * + * This function calls pci_enable_device(), reserves its register + * regions, sets the dma mask, enables bus master mode, and calls + * ata_device_add() + * + * LOCKING: + * Inherited from PCI layer (may sleep). + * + * RETURNS: + * Zero on success, negative on errno-based value on error. + */ + +int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, + unsigned int n_ports) +{ + struct ata_probe_ent *probe_ent = NULL, *probe_ent2 = NULL; + struct ata_port_info *port[2]; + u8 tmp8, mask; + unsigned int legacy_mode = 0; + int disable_dev_on_err = 1; + int rc; + + DPRINTK("ENTER\n"); + + port[0] = port_info[0]; + if (n_ports > 1) + port[1] = port_info[1]; + else + port[1] = port[0]; + + if ((port[0]->host_flags & ATA_FLAG_NO_LEGACY) == 0 + && (pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) { + /* TODO: What if one channel is in native mode ... */ + pci_read_config_byte(pdev, PCI_CLASS_PROG, &tmp8); + mask = (1 << 2) | (1 << 0); + if ((tmp8 & mask) != mask) + legacy_mode = (1 << 3); + } + + /* FIXME... */ + if ((!legacy_mode) && (n_ports > 2)) { + printk(KERN_ERR "ata: BUG: native mode, n_ports > 2\n"); + n_ports = 2; + /* For now */ + } + + /* FIXME: Really for ATA it isn't safe because the device may be + multi-purpose and we want to leave it alone if it was already + enabled. Secondly for shared use as Arjan says we want refcounting + + Checking dev->is_enabled is insufficient as this is not set at + boot for the primary video which is BIOS enabled + */ + + rc = pci_enable_device(pdev); + if (rc) + return rc; + + rc = pci_request_regions(pdev, DRV_NAME); + if (rc) { + disable_dev_on_err = 0; + goto err_out; + } + + /* FIXME: Should use platform specific mappers for legacy port ranges */ + if (legacy_mode) { + if (!request_region(0x1f0, 8, "libata")) { + struct resource *conflict, res; + res.start = 0x1f0; + res.end = 0x1f0 + 8 - 1; + conflict = ____request_resource(&ioport_resource, &res); + if (!strcmp(conflict->name, "libata")) + legacy_mode |= (1 << 0); + else { + disable_dev_on_err = 0; + printk(KERN_WARNING "ata: 0x1f0 IDE port busy\n"); + } + } else + legacy_mode |= (1 << 0); + + if (!request_region(0x170, 8, "libata")) { + struct resource *conflict, res; + res.start = 0x170; + res.end = 0x170 + 8 - 1; + conflict = ____request_resource(&ioport_resource, &res); + if (!strcmp(conflict->name, "libata")) + legacy_mode |= (1 << 1); + else { + disable_dev_on_err = 0; + printk(KERN_WARNING "ata: 0x170 IDE port busy\n"); + } + } else + legacy_mode |= (1 << 1); + } + + /* we have legacy mode, but all ports are unavailable */ + if (legacy_mode == (1 << 3)) { + rc = -EBUSY; + goto err_out_regions; + } + + rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); + if (rc) + goto err_out_regions; + rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); + if (rc) + goto err_out_regions; + + if (legacy_mode) { + if (legacy_mode & (1 << 0)) + probe_ent = ata_pci_init_legacy_port(pdev, port[0], 0); + if (legacy_mode & (1 << 1)) + probe_ent2 = ata_pci_init_legacy_port(pdev, port[1], 1); + } else { + if (n_ports == 2) + probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); + else + probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY); + } + if (!probe_ent && !probe_ent2) { + rc = -ENOMEM; + goto err_out_regions; + } + + pci_set_master(pdev); + + /* FIXME: check ata_device_add return */ + if (legacy_mode) { + if (legacy_mode & (1 << 0)) + ata_device_add(probe_ent); + if (legacy_mode & (1 << 1)) + ata_device_add(probe_ent2); + } else + ata_device_add(probe_ent); + + kfree(probe_ent); + kfree(probe_ent2); + + return 0; + +err_out_regions: + if (legacy_mode & (1 << 0)) + release_region(0x1f0, 8); + if (legacy_mode & (1 << 1)) + release_region(0x170, 8); + pci_release_regions(pdev); +err_out: + if (disable_dev_on_err) + pci_disable_device(pdev); + return rc; +} + +#endif /* CONFIG_PCI */ + diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 4f91b0dc572..714b42bad93 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -61,24 +61,17 @@ #include "libata.h" -static unsigned int ata_busy_sleep (struct ata_port *ap, - unsigned long tmout_pat, - unsigned long tmout); -static void ata_dev_reread_id(struct ata_port *ap, struct ata_device *dev); -static void ata_dev_init_params(struct ata_port *ap, struct ata_device *dev); +static unsigned int ata_dev_init_params(struct ata_port *ap, + struct ata_device *dev); static void ata_set_mode(struct ata_port *ap); static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev); -static unsigned int ata_get_mode_mask(const struct ata_port *ap, int shift); -static int fgb(u32 bitmap); -static int ata_choose_xfer_mode(const struct ata_port *ap, - u8 *xfer_mode_out, - unsigned int *xfer_shift_out); -static void __ata_qc_complete(struct ata_queued_cmd *qc); +static unsigned int ata_dev_xfermask(struct ata_port *ap, + struct ata_device *dev); static unsigned int ata_unique_id = 1; static struct workqueue_struct *ata_wq; -int atapi_enabled = 0; +int atapi_enabled = 1; module_param(atapi_enabled, int, 0444); MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on)"); @@ -91,403 +84,6 @@ MODULE_DESCRIPTION("Library module for ATA devices"); MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_VERSION); -/** - * ata_tf_load_pio - send taskfile registers to host controller - * @ap: Port to which output is sent - * @tf: ATA taskfile register set - * - * Outputs ATA taskfile to standard ATA host controller. - * - * LOCKING: - * Inherited from caller. - */ - -static void ata_tf_load_pio(struct ata_port *ap, const struct ata_taskfile *tf) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; - - if (tf->ctl != ap->last_ctl) { - outb(tf->ctl, ioaddr->ctl_addr); - ap->last_ctl = tf->ctl; - ata_wait_idle(ap); - } - - if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { - outb(tf->hob_feature, ioaddr->feature_addr); - outb(tf->hob_nsect, ioaddr->nsect_addr); - outb(tf->hob_lbal, ioaddr->lbal_addr); - outb(tf->hob_lbam, ioaddr->lbam_addr); - outb(tf->hob_lbah, ioaddr->lbah_addr); - VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n", - tf->hob_feature, - tf->hob_nsect, - tf->hob_lbal, - tf->hob_lbam, - tf->hob_lbah); - } - - if (is_addr) { - outb(tf->feature, ioaddr->feature_addr); - outb(tf->nsect, ioaddr->nsect_addr); - outb(tf->lbal, ioaddr->lbal_addr); - outb(tf->lbam, ioaddr->lbam_addr); - outb(tf->lbah, ioaddr->lbah_addr); - VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n", - tf->feature, - tf->nsect, - tf->lbal, - tf->lbam, - tf->lbah); - } - - if (tf->flags & ATA_TFLAG_DEVICE) { - outb(tf->device, ioaddr->device_addr); - VPRINTK("device 0x%X\n", tf->device); - } - - ata_wait_idle(ap); -} - -/** - * ata_tf_load_mmio - send taskfile registers to host controller - * @ap: Port to which output is sent - * @tf: ATA taskfile register set - * - * Outputs ATA taskfile to standard ATA host controller using MMIO. - * - * LOCKING: - * Inherited from caller. - */ - -static void ata_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; - - if (tf->ctl != ap->last_ctl) { - writeb(tf->ctl, (void __iomem *) ap->ioaddr.ctl_addr); - ap->last_ctl = tf->ctl; - ata_wait_idle(ap); - } - - if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { - writeb(tf->hob_feature, (void __iomem *) ioaddr->feature_addr); - writeb(tf->hob_nsect, (void __iomem *) ioaddr->nsect_addr); - writeb(tf->hob_lbal, (void __iomem *) ioaddr->lbal_addr); - writeb(tf->hob_lbam, (void __iomem *) ioaddr->lbam_addr); - writeb(tf->hob_lbah, (void __iomem *) ioaddr->lbah_addr); - VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n", - tf->hob_feature, - tf->hob_nsect, - tf->hob_lbal, - tf->hob_lbam, - tf->hob_lbah); - } - - if (is_addr) { - writeb(tf->feature, (void __iomem *) ioaddr->feature_addr); - writeb(tf->nsect, (void __iomem *) ioaddr->nsect_addr); - writeb(tf->lbal, (void __iomem *) ioaddr->lbal_addr); - writeb(tf->lbam, (void __iomem *) ioaddr->lbam_addr); - writeb(tf->lbah, (void __iomem *) ioaddr->lbah_addr); - VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n", - tf->feature, - tf->nsect, - tf->lbal, - tf->lbam, - tf->lbah); - } - - if (tf->flags & ATA_TFLAG_DEVICE) { - writeb(tf->device, (void __iomem *) ioaddr->device_addr); - VPRINTK("device 0x%X\n", tf->device); - } - - ata_wait_idle(ap); -} - - -/** - * ata_tf_load - send taskfile registers to host controller - * @ap: Port to which output is sent - * @tf: ATA taskfile register set - * - * Outputs ATA taskfile to standard ATA host controller using MMIO - * or PIO as indicated by the ATA_FLAG_MMIO flag. - * Writes the control, feature, nsect, lbal, lbam, and lbah registers. - * Optionally (ATA_TFLAG_LBA48) writes hob_feature, hob_nsect, - * hob_lbal, hob_lbam, and hob_lbah. - * - * This function waits for idle (!BUSY and !DRQ) after writing - * registers. If the control register has a new value, this - * function also waits for idle after writing control and before - * writing the remaining registers. - * - * May be used as the tf_load() entry in ata_port_operations. - * - * LOCKING: - * Inherited from caller. - */ -void ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) -{ - if (ap->flags & ATA_FLAG_MMIO) - ata_tf_load_mmio(ap, tf); - else - ata_tf_load_pio(ap, tf); -} - -/** - * ata_exec_command_pio - issue ATA command to host controller - * @ap: port to which command is being issued - * @tf: ATA taskfile register set - * - * Issues PIO write to ATA command register, with proper - * synchronization with interrupt handler / other threads. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -static void ata_exec_command_pio(struct ata_port *ap, const struct ata_taskfile *tf) -{ - DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command); - - outb(tf->command, ap->ioaddr.command_addr); - ata_pause(ap); -} - - -/** - * ata_exec_command_mmio - issue ATA command to host controller - * @ap: port to which command is being issued - * @tf: ATA taskfile register set - * - * Issues MMIO write to ATA command register, with proper - * synchronization with interrupt handler / other threads. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -static void ata_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf) -{ - DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command); - - writeb(tf->command, (void __iomem *) ap->ioaddr.command_addr); - ata_pause(ap); -} - - -/** - * ata_exec_command - issue ATA command to host controller - * @ap: port to which command is being issued - * @tf: ATA taskfile register set - * - * Issues PIO/MMIO write to ATA command register, with proper - * synchronization with interrupt handler / other threads. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ -void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf) -{ - if (ap->flags & ATA_FLAG_MMIO) - ata_exec_command_mmio(ap, tf); - else - ata_exec_command_pio(ap, tf); -} - -/** - * ata_tf_to_host - issue ATA taskfile to host controller - * @ap: port to which command is being issued - * @tf: ATA taskfile register set - * - * Issues ATA taskfile register set to ATA host controller, - * with proper synchronization with interrupt handler and - * other threads. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -static inline void ata_tf_to_host(struct ata_port *ap, - const struct ata_taskfile *tf) -{ - ap->ops->tf_load(ap, tf); - ap->ops->exec_command(ap, tf); -} - -/** - * ata_tf_read_pio - input device's ATA taskfile shadow registers - * @ap: Port from which input is read - * @tf: ATA taskfile register set for storing input - * - * Reads ATA taskfile registers for currently-selected device - * into @tf. - * - * LOCKING: - * Inherited from caller. - */ - -static void ata_tf_read_pio(struct ata_port *ap, struct ata_taskfile *tf) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - - tf->command = ata_check_status(ap); - tf->feature = inb(ioaddr->error_addr); - tf->nsect = inb(ioaddr->nsect_addr); - tf->lbal = inb(ioaddr->lbal_addr); - tf->lbam = inb(ioaddr->lbam_addr); - tf->lbah = inb(ioaddr->lbah_addr); - tf->device = inb(ioaddr->device_addr); - - if (tf->flags & ATA_TFLAG_LBA48) { - outb(tf->ctl | ATA_HOB, ioaddr->ctl_addr); - tf->hob_feature = inb(ioaddr->error_addr); - tf->hob_nsect = inb(ioaddr->nsect_addr); - tf->hob_lbal = inb(ioaddr->lbal_addr); - tf->hob_lbam = inb(ioaddr->lbam_addr); - tf->hob_lbah = inb(ioaddr->lbah_addr); - } -} - -/** - * ata_tf_read_mmio - input device's ATA taskfile shadow registers - * @ap: Port from which input is read - * @tf: ATA taskfile register set for storing input - * - * Reads ATA taskfile registers for currently-selected device - * into @tf via MMIO. - * - * LOCKING: - * Inherited from caller. - */ - -static void ata_tf_read_mmio(struct ata_port *ap, struct ata_taskfile *tf) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - - tf->command = ata_check_status(ap); - tf->feature = readb((void __iomem *)ioaddr->error_addr); - tf->nsect = readb((void __iomem *)ioaddr->nsect_addr); - tf->lbal = readb((void __iomem *)ioaddr->lbal_addr); - tf->lbam = readb((void __iomem *)ioaddr->lbam_addr); - tf->lbah = readb((void __iomem *)ioaddr->lbah_addr); - tf->device = readb((void __iomem *)ioaddr->device_addr); - - if (tf->flags & ATA_TFLAG_LBA48) { - writeb(tf->ctl | ATA_HOB, (void __iomem *) ap->ioaddr.ctl_addr); - tf->hob_feature = readb((void __iomem *)ioaddr->error_addr); - tf->hob_nsect = readb((void __iomem *)ioaddr->nsect_addr); - tf->hob_lbal = readb((void __iomem *)ioaddr->lbal_addr); - tf->hob_lbam = readb((void __iomem *)ioaddr->lbam_addr); - tf->hob_lbah = readb((void __iomem *)ioaddr->lbah_addr); - } -} - - -/** - * ata_tf_read - input device's ATA taskfile shadow registers - * @ap: Port from which input is read - * @tf: ATA taskfile register set for storing input - * - * Reads ATA taskfile registers for currently-selected device - * into @tf. - * - * Reads nsect, lbal, lbam, lbah, and device. If ATA_TFLAG_LBA48 - * is set, also reads the hob registers. - * - * May be used as the tf_read() entry in ata_port_operations. - * - * LOCKING: - * Inherited from caller. - */ -void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf) -{ - if (ap->flags & ATA_FLAG_MMIO) - ata_tf_read_mmio(ap, tf); - else - ata_tf_read_pio(ap, tf); -} - -/** - * ata_check_status_pio - Read device status reg & clear interrupt - * @ap: port where the device is - * - * Reads ATA taskfile status register for currently-selected device - * and return its value. This also clears pending interrupts - * from this device - * - * LOCKING: - * Inherited from caller. - */ -static u8 ata_check_status_pio(struct ata_port *ap) -{ - return inb(ap->ioaddr.status_addr); -} - -/** - * ata_check_status_mmio - Read device status reg & clear interrupt - * @ap: port where the device is - * - * Reads ATA taskfile status register for currently-selected device - * via MMIO and return its value. This also clears pending interrupts - * from this device - * - * LOCKING: - * Inherited from caller. - */ -static u8 ata_check_status_mmio(struct ata_port *ap) -{ - return readb((void __iomem *) ap->ioaddr.status_addr); -} - - -/** - * ata_check_status - Read device status reg & clear interrupt - * @ap: port where the device is - * - * Reads ATA taskfile status register for currently-selected device - * and return its value. This also clears pending interrupts - * from this device - * - * May be used as the check_status() entry in ata_port_operations. - * - * LOCKING: - * Inherited from caller. - */ -u8 ata_check_status(struct ata_port *ap) -{ - if (ap->flags & ATA_FLAG_MMIO) - return ata_check_status_mmio(ap); - return ata_check_status_pio(ap); -} - - -/** - * ata_altstatus - Read device alternate status reg - * @ap: port where the device is - * - * Reads ATA taskfile alternate status register for - * currently-selected device and return its value. - * - * Note: may NOT be used as the check_altstatus() entry in - * ata_port_operations. - * - * LOCKING: - * Inherited from caller. - */ -u8 ata_altstatus(struct ata_port *ap) -{ - if (ap->ops->check_altstatus) - return ap->ops->check_altstatus(ap); - - if (ap->flags & ATA_FLAG_MMIO) - return readb((void __iomem *)ap->ioaddr.altstatus_addr); - return inb(ap->ioaddr.altstatus_addr); -} - /** * ata_tf_to_fis - Convert ATA taskfile to SATA FIS structure @@ -632,58 +228,148 @@ int ata_rwcmd_protocol(struct ata_queued_cmd *qc) return -1; } -static const char * const xfer_mode_str[] = { - "UDMA/16", - "UDMA/25", - "UDMA/33", - "UDMA/44", - "UDMA/66", - "UDMA/100", - "UDMA/133", - "UDMA7", - "MWDMA0", - "MWDMA1", - "MWDMA2", - "PIO0", - "PIO1", - "PIO2", - "PIO3", - "PIO4", +/** + * ata_pack_xfermask - Pack pio, mwdma and udma masks into xfer_mask + * @pio_mask: pio_mask + * @mwdma_mask: mwdma_mask + * @udma_mask: udma_mask + * + * Pack @pio_mask, @mwdma_mask and @udma_mask into a single + * unsigned int xfer_mask. + * + * LOCKING: + * None. + * + * RETURNS: + * Packed xfer_mask. + */ +static unsigned int ata_pack_xfermask(unsigned int pio_mask, + unsigned int mwdma_mask, + unsigned int udma_mask) +{ + return ((pio_mask << ATA_SHIFT_PIO) & ATA_MASK_PIO) | + ((mwdma_mask << ATA_SHIFT_MWDMA) & ATA_MASK_MWDMA) | + ((udma_mask << ATA_SHIFT_UDMA) & ATA_MASK_UDMA); +} + +static const struct ata_xfer_ent { + unsigned int shift, bits; + u8 base; +} ata_xfer_tbl[] = { + { ATA_SHIFT_PIO, ATA_BITS_PIO, XFER_PIO_0 }, + { ATA_SHIFT_MWDMA, ATA_BITS_MWDMA, XFER_MW_DMA_0 }, + { ATA_SHIFT_UDMA, ATA_BITS_UDMA, XFER_UDMA_0 }, + { -1, }, }; /** - * ata_udma_string - convert UDMA bit offset to string - * @mask: mask of bits supported; only highest bit counts. + * ata_xfer_mask2mode - Find matching XFER_* for the given xfer_mask + * @xfer_mask: xfer_mask of interest * - * Determine string which represents the highest speed - * (highest bit in @udma_mask). + * Return matching XFER_* value for @xfer_mask. Only the highest + * bit of @xfer_mask is considered. * * LOCKING: * None. * * RETURNS: - * Constant C string representing highest speed listed in - * @udma_mask, or the constant C string "<n/a>". + * Matching XFER_* value, 0 if no match found. */ +static u8 ata_xfer_mask2mode(unsigned int xfer_mask) +{ + int highbit = fls(xfer_mask) - 1; + const struct ata_xfer_ent *ent; -static const char *ata_mode_string(unsigned int mask) + for (ent = ata_xfer_tbl; ent->shift >= 0; ent++) + if (highbit >= ent->shift && highbit < ent->shift + ent->bits) + return ent->base + highbit - ent->shift; + return 0; +} + +/** + * ata_xfer_mode2mask - Find matching xfer_mask for XFER_* + * @xfer_mode: XFER_* of interest + * + * Return matching xfer_mask for @xfer_mode. + * + * LOCKING: + * None. + * + * RETURNS: + * Matching xfer_mask, 0 if no match found. + */ +static unsigned int ata_xfer_mode2mask(u8 xfer_mode) { - int i; + const struct ata_xfer_ent *ent; - for (i = 7; i >= 0; i--) - if (mask & (1 << i)) - goto out; - for (i = ATA_SHIFT_MWDMA + 2; i >= ATA_SHIFT_MWDMA; i--) - if (mask & (1 << i)) - goto out; - for (i = ATA_SHIFT_PIO + 4; i >= ATA_SHIFT_PIO; i--) - if (mask & (1 << i)) - goto out; + for (ent = ata_xfer_tbl; ent->shift >= 0; ent++) + if (xfer_mode >= ent->base && xfer_mode < ent->base + ent->bits) + return 1 << (ent->shift + xfer_mode - ent->base); + return 0; +} - return "<n/a>"; +/** + * ata_xfer_mode2shift - Find matching xfer_shift for XFER_* + * @xfer_mode: XFER_* of interest + * + * Return matching xfer_shift for @xfer_mode. + * + * LOCKING: + * None. + * + * RETURNS: + * Matching xfer_shift, -1 if no match found. + */ +static int ata_xfer_mode2shift(unsigned int xfer_mode) +{ + const struct ata_xfer_ent *ent; -out: - return xfer_mode_str[i]; + for (ent = ata_xfer_tbl; ent->shift >= 0; ent++) + if (xfer_mode >= ent->base && xfer_mode < ent->base + ent->bits) + return ent->shift; + return -1; +} + +/** + * ata_mode_string - convert xfer_mask to string + * @xfer_mask: mask of bits supported; only highest bit counts. + * + * Determine string which represents the highest speed + * (highest bit in @modemask). + * + * LOCKING: + * None. + * + * RETURNS: + * Constant C string representing highest speed listed in + * @mode_mask, or the constant C string "<n/a>". + */ +static const char *ata_mode_string(unsigned int xfer_mask) +{ + static const char * const xfer_mode_str[] = { + "PIO0", + "PIO1", + "PIO2", + "PIO3", + "PIO4", + "MWDMA0", + "MWDMA1", + "MWDMA2", + "UDMA/16", + "UDMA/25", + "UDMA/33", + "UDMA/44", + "UDMA/66", + "UDMA/100", + "UDMA/133", + "UDMA7", + }; + int highbit; + + highbit = fls(xfer_mask) - 1; + if (highbit >= 0 && highbit < ARRAY_SIZE(xfer_mode_str)) + return xfer_mode_str[highbit]; + return "<n/a>"; } /** @@ -838,6 +524,7 @@ unsigned int ata_dev_classify(const struct ata_taskfile *tf) * ata_dev_try_classify - Parse returned ATA device signature * @ap: ATA channel to examine * @device: Device to examine (starting at zero) + * @r_err: Value of error register on completion * * After an event -- SRST, E.D.D., or SATA COMRESET -- occurs, * an ATA/ATAPI-defined set of values is placed in the ATA @@ -850,11 +537,14 @@ unsigned int ata_dev_classify(const struct ata_taskfile *tf) * * LOCKING: * caller. + * + * RETURNS: + * Device type - %ATA_DEV_ATA, %ATA_DEV_ATAPI or %ATA_DEV_NONE. */ -static u8 ata_dev_try_classify(struct ata_port *ap, unsigned int device) +static unsigned int +ata_dev_try_classify(struct ata_port *ap, unsigned int device, u8 *r_err) { - struct ata_device *dev = &ap->device[device]; struct ata_taskfile tf; unsigned int class; u8 err; @@ -865,8 +555,8 @@ static u8 ata_dev_try_classify(struct ata_port *ap, unsigned int device) ap->ops->tf_read(ap, &tf); err = tf.feature; - - dev->class = ATA_DEV_NONE; + if (r_err) + *r_err = err; /* see if device passed diags */ if (err == 1) @@ -874,22 +564,20 @@ static u8 ata_dev_try_classify(struct ata_port *ap, unsigned int device) else if ((device == 0) && (err == 0x81)) /* do nothing */ ; else - return err; + return ATA_DEV_NONE; - /* determine if device if ATA or ATAPI */ + /* determine if device is ATA or ATAPI */ class = ata_dev_classify(&tf); + if (class == ATA_DEV_UNKNOWN) - return err; + return ATA_DEV_NONE; if ((class == ATA_DEV_ATA) && (ata_chk_status(ap) == 0)) - return err; - - dev->class = class; - - return err; + return ATA_DEV_NONE; + return class; } /** - * ata_dev_id_string - Convert IDENTIFY DEVICE page into string + * ata_id_string - Convert IDENTIFY DEVICE page into string * @id: IDENTIFY DEVICE results we will examine * @s: string into which data is output * @ofs: offset into identify device page @@ -903,8 +591,8 @@ static u8 ata_dev_try_classify(struct ata_port *ap, unsigned int device) * caller. */ -void ata_dev_id_string(const u16 *id, unsigned char *s, - unsigned int ofs, unsigned int len) +void ata_id_string(const u16 *id, unsigned char *s, + unsigned int ofs, unsigned int len) { unsigned int c; @@ -922,6 +610,49 @@ void ata_dev_id_string(const u16 *id, unsigned char *s, } } +/** + * ata_id_c_string - Convert IDENTIFY DEVICE page into C string + * @id: IDENTIFY DEVICE results we will examine + * @s: string into which data is output + * @ofs: offset into identify device page + * @len: length of string to return. must be an odd number. + * + * This function is identical to ata_id_string except that it + * trims trailing spaces and terminates the resulting string with + * null. @len must be actual maximum length (even number) + 1. + * + * LOCKING: + * caller. + */ +void ata_id_c_string(const u16 *id, unsigned char *s, + unsigned int ofs, unsigned int len) +{ + unsigned char *p; + + WARN_ON(!(len & 1)); + + ata_id_string(id, s, ofs, len - 1); + + p = s + strnlen(s, len - 1); + while (p > s && p[-1] == ' ') + p--; + *p = '\0'; +} + +static u64 ata_id_n_sectors(const u16 *id) +{ + if (ata_id_has_lba(id)) { + if (ata_id_has_lba48(id)) + return ata_id_u64(id, 100); + else + return ata_id_u32(id, 60); + } else { + if (ata_id_current_chs_valid(id)) + return ata_id_u32(id, 57); + else + return id[1] * id[3] * id[6]; + } +} /** * ata_noop_dev_select - Select device 0/1 on ATA bus @@ -1011,90 +742,172 @@ void ata_dev_select(struct ata_port *ap, unsigned int device, /** * ata_dump_id - IDENTIFY DEVICE info debugging output - * @dev: Device whose IDENTIFY DEVICE page we will dump + * @id: IDENTIFY DEVICE page to dump * - * Dump selected 16-bit words from a detected device's - * IDENTIFY PAGE page. + * Dump selected 16-bit words from the given IDENTIFY DEVICE + * page. * * LOCKING: * caller. */ -static inline void ata_dump_id(const struct ata_device *dev) +static inline void ata_dump_id(const u16 *id) { DPRINTK("49==0x%04x " "53==0x%04x " "63==0x%04x " "64==0x%04x " "75==0x%04x \n", - dev->id[49], - dev->id[53], - dev->id[63], - dev->id[64], - dev->id[75]); + id[49], + id[53], + id[63], + id[64], + id[75]); DPRINTK("80==0x%04x " "81==0x%04x " "82==0x%04x " "83==0x%04x " "84==0x%04x \n", - dev->id[80], - dev->id[81], - dev->id[82], - dev->id[83], - dev->id[84]); + id[80], + id[81], + id[82], + id[83], + id[84]); DPRINTK("88==0x%04x " "93==0x%04x\n", - dev->id[88], - dev->id[93]); + id[88], + id[93]); } -/* - * Compute the PIO modes available for this device. This is not as - * trivial as it seems if we must consider early devices correctly. +/** + * ata_id_xfermask - Compute xfermask from the given IDENTIFY data + * @id: IDENTIFY data to compute xfer mask from + * + * Compute the xfermask for this device. This is not as trivial + * as it seems if we must consider early devices correctly. + * + * FIXME: pre IDE drive timing (do we care ?). + * + * LOCKING: + * None. * - * FIXME: pre IDE drive timing (do we care ?). + * RETURNS: + * Computed xfermask */ - -static unsigned int ata_pio_modes(const struct ata_device *adev) +static unsigned int ata_id_xfermask(const u16 *id) { - u16 modes; + unsigned int pio_mask, mwdma_mask, udma_mask; /* Usual case. Word 53 indicates word 64 is valid */ - if (adev->id[ATA_ID_FIELD_VALID] & (1 << 1)) { - modes = adev->id[ATA_ID_PIO_MODES] & 0x03; - modes <<= 3; - modes |= 0x7; - return modes; + if (id[ATA_ID_FIELD_VALID] & (1 << 1)) { + pio_mask = id[ATA_ID_PIO_MODES] & 0x03; + pio_mask <<= 3; + pio_mask |= 0x7; + } else { + /* If word 64 isn't valid then Word 51 high byte holds + * the PIO timing number for the maximum. Turn it into + * a mask. + */ + pio_mask = (2 << (id[ATA_ID_OLD_PIO_MODES] & 0xFF)) - 1 ; + + /* But wait.. there's more. Design your standards by + * committee and you too can get a free iordy field to + * process. However its the speeds not the modes that + * are supported... Note drivers using the timing API + * will get this right anyway + */ } - /* If word 64 isn't valid then Word 51 high byte holds the PIO timing - number for the maximum. Turn it into a mask and return it */ - modes = (2 << ((adev->id[ATA_ID_OLD_PIO_MODES] >> 8) & 0xFF)) - 1 ; - return modes; - /* But wait.. there's more. Design your standards by committee and - you too can get a free iordy field to process. However its the - speeds not the modes that are supported... Note drivers using the - timing API will get this right anyway */ + mwdma_mask = id[ATA_ID_MWDMA_MODES] & 0x07; + + udma_mask = 0; + if (id[ATA_ID_FIELD_VALID] & (1 << 2)) + udma_mask = id[ATA_ID_UDMA_MODES] & 0xff; + + return ata_pack_xfermask(pio_mask, mwdma_mask, udma_mask); } -struct ata_exec_internal_arg { - unsigned int err_mask; - struct ata_taskfile *tf; - struct completion *waiting; -}; +/** + * ata_port_queue_task - Queue port_task + * @ap: The ata_port to queue port_task for + * + * Schedule @fn(@data) for execution after @delay jiffies using + * port_task. There is one port_task per port and it's the + * user(low level driver)'s responsibility to make sure that only + * one task is active at any given time. + * + * libata core layer takes care of synchronization between + * port_task and EH. ata_port_queue_task() may be ignored for EH + * synchronization. + * + * LOCKING: + * Inherited from caller. + */ +void ata_port_queue_task(struct ata_port *ap, void (*fn)(void *), void *data, + unsigned long delay) +{ + int rc; + + if (ap->flags & ATA_FLAG_FLUSH_PORT_TASK) + return; + + PREPARE_WORK(&ap->port_task, fn, data); + + if (!delay) + rc = queue_work(ata_wq, &ap->port_task); + else + rc = queue_delayed_work(ata_wq, &ap->port_task, delay); + + /* rc == 0 means that another user is using port task */ + WARN_ON(rc == 0); +} -int ata_qc_complete_internal(struct ata_queued_cmd *qc) +/** + * ata_port_flush_task - Flush port_task + * @ap: The ata_port to flush port_task for + * + * After this function completes, port_task is guranteed not to + * be running or scheduled. + * + * LOCKING: + * Kernel thread context (may sleep) + */ +void ata_port_flush_task(struct ata_port *ap) { - struct ata_exec_internal_arg *arg = qc->private_data; - struct completion *waiting = arg->waiting; + unsigned long flags; - if (!(qc->err_mask & ~AC_ERR_DEV)) - qc->ap->ops->tf_read(qc->ap, arg->tf); - arg->err_mask = qc->err_mask; - arg->waiting = NULL; - complete(waiting); + DPRINTK("ENTER\n"); - return 0; + spin_lock_irqsave(&ap->host_set->lock, flags); + ap->flags |= ATA_FLAG_FLUSH_PORT_TASK; + spin_unlock_irqrestore(&ap->host_set->lock, flags); + + DPRINTK("flush #1\n"); + flush_workqueue(ata_wq); + + /* + * At this point, if a task is running, it's guaranteed to see + * the FLUSH flag; thus, it will never queue pio tasks again. + * Cancel and flush. + */ + if (!cancel_delayed_work(&ap->port_task)) { + DPRINTK("flush #2\n"); + flush_workqueue(ata_wq); + } + + spin_lock_irqsave(&ap->host_set->lock, flags); + ap->flags &= ~ATA_FLAG_FLUSH_PORT_TASK; + spin_unlock_irqrestore(&ap->host_set->lock, flags); + + DPRINTK("EXIT\n"); +} + +void ata_qc_complete_internal(struct ata_queued_cmd *qc) +{ + struct completion *waiting = qc->private_data; + + qc->ap->ops->tf_read(qc->ap, &qc->tf); + complete(waiting); } /** @@ -1125,7 +938,7 @@ ata_exec_internal(struct ata_port *ap, struct ata_device *dev, struct ata_queued_cmd *qc; DECLARE_COMPLETION(wait); unsigned long flags; - struct ata_exec_internal_arg arg; + unsigned int err_mask; spin_lock_irqsave(&ap->host_set->lock, flags); @@ -1139,13 +952,12 @@ ata_exec_internal(struct ata_port *ap, struct ata_device *dev, qc->nsect = buflen / ATA_SECT_SIZE; } - arg.waiting = &wait; - arg.tf = tf; - qc->private_data = &arg; + qc->private_data = &wait; qc->complete_fn = ata_qc_complete_internal; - if (ata_qc_issue(qc)) - goto issue_fail; + qc->err_mask = ata_qc_issue(qc); + if (qc->err_mask) + ata_qc_complete(qc); spin_unlock_irqrestore(&ap->host_set->lock, flags); @@ -1158,8 +970,8 @@ ata_exec_internal(struct ata_port *ap, struct ata_device *dev, * before the caller cleans up, it will result in a * spurious interrupt. We can live with that. */ - if (arg.waiting) { - qc->err_mask = AC_ERR_OTHER; + if (qc->flags & ATA_QCFLAG_ACTIVE) { + qc->err_mask = AC_ERR_TIMEOUT; ata_qc_complete(qc); printk(KERN_WARNING "ata%u: qc timeout (cmd 0x%x)\n", ap->id, command); @@ -1168,12 +980,12 @@ ata_exec_internal(struct ata_port *ap, struct ata_device *dev, spin_unlock_irqrestore(&ap->host_set->lock, flags); } - return arg.err_mask; + *tf = qc->tf; + err_mask = qc->err_mask; - issue_fail: ata_qc_free(qc); - spin_unlock_irqrestore(&ap->host_set->lock, flags); - return AC_ERR_OTHER; + + return err_mask; } /** @@ -1210,73 +1022,78 @@ unsigned int ata_pio_need_iordy(const struct ata_device *adev) } /** - * ata_dev_identify - obtain IDENTIFY x DEVICE page - * @ap: port on which device we wish to probe resides - * @device: device bus address, starting at zero - * - * Following bus reset, we issue the IDENTIFY [PACKET] DEVICE - * command, and read back the 512-byte device information page. - * The device information page is fed to us via the standard - * PIO-IN protocol, but we hand-code it here. (TODO: investigate - * using standard PIO-IN paths) - * - * After reading the device information page, we use several - * bits of information from it to initialize data structures - * that will be used during the lifetime of the ata_device. - * Other data from the info page is used to disqualify certain - * older ATA devices we do not wish to support. + * ata_dev_read_id - Read ID data from the specified device + * @ap: port on which target device resides + * @dev: target device + * @p_class: pointer to class of the target device (may be changed) + * @post_reset: is this read ID post-reset? + * @p_id: read IDENTIFY page (newly allocated) + * + * Read ID data from the specified device. ATA_CMD_ID_ATA is + * performed on ATA devices and ATA_CMD_ID_ATAPI on ATAPI + * devices. This function also takes care of EDD signature + * misreporting (to be removed once EDD support is gone) and + * issues ATA_CMD_INIT_DEV_PARAMS for pre-ATA4 drives. * * LOCKING: - * Inherited from caller. Some functions called by this function - * obtain the host_set lock. + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -errno otherwise. */ - -static void ata_dev_identify(struct ata_port *ap, unsigned int device) +static int ata_dev_read_id(struct ata_port *ap, struct ata_device *dev, + unsigned int *p_class, int post_reset, u16 **p_id) { - struct ata_device *dev = &ap->device[device]; - unsigned int major_version; - u16 tmp; - unsigned long xfer_modes; + unsigned int class = *p_class; unsigned int using_edd; struct ata_taskfile tf; - unsigned int err_mask; + unsigned int err_mask = 0; + u16 *id; + const char *reason; int rc; - if (!ata_dev_present(dev)) { - DPRINTK("ENTER/EXIT (host %u, dev %u) -- nodev\n", - ap->id, device); - return; - } + DPRINTK("ENTER, host %u, dev %u\n", ap->id, dev->devno); - if (ap->flags & (ATA_FLAG_SRST | ATA_FLAG_SATA_RESET)) + if (ap->ops->probe_reset || + ap->flags & (ATA_FLAG_SRST | ATA_FLAG_SATA_RESET)) using_edd = 0; else using_edd = 1; - DPRINTK("ENTER, host %u, dev %u\n", ap->id, device); - - assert (dev->class == ATA_DEV_ATA || dev->class == ATA_DEV_ATAPI || - dev->class == ATA_DEV_NONE); + ata_dev_select(ap, dev->devno, 1, 1); /* select device 0/1 */ - ata_dev_select(ap, device, 1, 1); /* select device 0/1 */ + id = kmalloc(sizeof(id[0]) * ATA_ID_WORDS, GFP_KERNEL); + if (id == NULL) { + rc = -ENOMEM; + reason = "out of memory"; + goto err_out; + } -retry: - ata_tf_init(ap, &tf, device); + retry: + ata_tf_init(ap, &tf, dev->devno); - if (dev->class == ATA_DEV_ATA) { + switch (class) { + case ATA_DEV_ATA: tf.command = ATA_CMD_ID_ATA; - DPRINTK("do ATA identify\n"); - } else { + break; + case ATA_DEV_ATAPI: tf.command = ATA_CMD_ID_ATAPI; - DPRINTK("do ATAPI identify\n"); + break; + default: + rc = -ENODEV; + reason = "unsupported class"; + goto err_out; } tf.protocol = ATA_PROT_PIO; err_mask = ata_exec_internal(ap, dev, &tf, DMA_FROM_DEVICE, - dev->id, sizeof(dev->id)); + id, sizeof(id[0]) * ATA_ID_WORDS); if (err_mask) { + rc = -EIO; + reason = "I/O error"; + if (err_mask & ~AC_ERR_DEV) goto err_out; @@ -1291,180 +1108,223 @@ retry: * ATA software reset (SRST, the default) does not appear * to have this problem. */ - if ((using_edd) && (dev->class == ATA_DEV_ATA)) { + if ((using_edd) && (class == ATA_DEV_ATA)) { u8 err = tf.feature; if (err & ATA_ABORTED) { - dev->class = ATA_DEV_ATAPI; + class = ATA_DEV_ATAPI; goto retry; } } goto err_out; } - swap_buf_le16(dev->id, ATA_ID_WORDS); + swap_buf_le16(id, ATA_ID_WORDS); + + /* sanity check */ + if ((class == ATA_DEV_ATA) != ata_id_is_ata(id)) { + rc = -EINVAL; + reason = "device reports illegal type"; + goto err_out; + } + + if (post_reset && class == ATA_DEV_ATA) { + /* + * The exact sequence expected by certain pre-ATA4 drives is: + * SRST RESET + * IDENTIFY + * INITIALIZE DEVICE PARAMETERS + * anything else.. + * Some drives were very specific about that exact sequence. + */ + if (ata_id_major_version(id) < 4 || !ata_id_has_lba(id)) { + err_mask = ata_dev_init_params(ap, dev); + if (err_mask) { + rc = -EIO; + reason = "INIT_DEV_PARAMS failed"; + goto err_out; + } + + /* current CHS translation info (id[53-58]) might be + * changed. reread the identify device info. + */ + post_reset = 0; + goto retry; + } + } + + *p_class = class; + *p_id = id; + return 0; + + err_out: + printk(KERN_WARNING "ata%u: dev %u failed to IDENTIFY (%s)\n", + ap->id, dev->devno, reason); + kfree(id); + return rc; +} + +static inline u8 ata_dev_knobble(const struct ata_port *ap, + struct ata_device *dev) +{ + return ((ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(dev->id))); +} + +/** + * ata_dev_configure - Configure the specified ATA/ATAPI device + * @ap: Port on which target device resides + * @dev: Target device to configure + * @print_info: Enable device info printout + * + * Configure @dev according to @dev->id. Generic and low-level + * driver specific fixups are also applied. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -errno otherwise + */ +static int ata_dev_configure(struct ata_port *ap, struct ata_device *dev, + int print_info) +{ + const u16 *id = dev->id; + unsigned int xfer_mask; + int i, rc; + + if (!ata_dev_present(dev)) { + DPRINTK("ENTER/EXIT (host %u, dev %u) -- nodev\n", + ap->id, dev->devno); + return 0; + } + + DPRINTK("ENTER, host %u, dev %u\n", ap->id, dev->devno); /* print device capabilities */ - printk(KERN_DEBUG "ata%u: dev %u cfg " - "49:%04x 82:%04x 83:%04x 84:%04x 85:%04x 86:%04x 87:%04x 88:%04x\n", - ap->id, device, dev->id[49], - dev->id[82], dev->id[83], dev->id[84], - dev->id[85], dev->id[86], dev->id[87], - dev->id[88]); + if (print_info) + printk(KERN_DEBUG "ata%u: dev %u cfg 49:%04x 82:%04x 83:%04x " + "84:%04x 85:%04x 86:%04x 87:%04x 88:%04x\n", + ap->id, dev->devno, id[49], id[82], id[83], + id[84], id[85], id[86], id[87], id[88]); + + /* initialize to-be-configured parameters */ + dev->flags = 0; + dev->max_sectors = 0; + dev->cdb_len = 0; + dev->n_sectors = 0; + dev->cylinders = 0; + dev->heads = 0; + dev->sectors = 0; /* * common ATA, ATAPI feature tests */ /* we require DMA support (bits 8 of word 49) */ - if (!ata_id_has_dma(dev->id)) { + if (!ata_id_has_dma(id)) { printk(KERN_DEBUG "ata%u: no dma\n", ap->id); + rc = -EINVAL; goto err_out_nosup; } - /* quick-n-dirty find max transfer mode; for printk only */ - xfer_modes = dev->id[ATA_ID_UDMA_MODES]; - if (!xfer_modes) - xfer_modes = (dev->id[ATA_ID_MWDMA_MODES]) << ATA_SHIFT_MWDMA; - if (!xfer_modes) - xfer_modes = ata_pio_modes(dev); + /* find max transfer mode; for printk only */ + xfer_mask = ata_id_xfermask(id); - ata_dump_id(dev); + ata_dump_id(id); /* ATA-specific feature tests */ if (dev->class == ATA_DEV_ATA) { - if (!ata_id_is_ata(dev->id)) /* sanity check */ - goto err_out_nosup; + dev->n_sectors = ata_id_n_sectors(id); - /* get major version */ - tmp = dev->id[ATA_ID_MAJOR_VER]; - for (major_version = 14; major_version >= 1; major_version--) - if (tmp & (1 << major_version)) - break; + if (ata_id_has_lba(id)) { + const char *lba_desc; - /* - * The exact sequence expected by certain pre-ATA4 drives is: - * SRST RESET - * IDENTIFY - * INITIALIZE DEVICE PARAMETERS - * anything else.. - * Some drives were very specific about that exact sequence. - */ - if (major_version < 4 || (!ata_id_has_lba(dev->id))) { - ata_dev_init_params(ap, dev); - - /* current CHS translation info (id[53-58]) might be - * changed. reread the identify device info. - */ - ata_dev_reread_id(ap, dev); - } - - if (ata_id_has_lba(dev->id)) { + lba_desc = "LBA"; dev->flags |= ATA_DFLAG_LBA; - - if (ata_id_has_lba48(dev->id)) { + if (ata_id_has_lba48(id)) { dev->flags |= ATA_DFLAG_LBA48; - dev->n_sectors = ata_id_u64(dev->id, 100); - } else { - dev->n_sectors = ata_id_u32(dev->id, 60); + lba_desc = "LBA48"; } /* print device info to dmesg */ - printk(KERN_INFO "ata%u: dev %u ATA-%d, max %s, %Lu sectors:%s\n", - ap->id, device, - major_version, - ata_mode_string(xfer_modes), - (unsigned long long)dev->n_sectors, - dev->flags & ATA_DFLAG_LBA48 ? " LBA48" : " LBA"); - } else { + if (print_info) + printk(KERN_INFO "ata%u: dev %u ATA-%d, " + "max %s, %Lu sectors: %s\n", + ap->id, dev->devno, + ata_id_major_version(id), + ata_mode_string(xfer_mask), + (unsigned long long)dev->n_sectors, + lba_desc); + } else { /* CHS */ /* Default translation */ - dev->cylinders = dev->id[1]; - dev->heads = dev->id[3]; - dev->sectors = dev->id[6]; - dev->n_sectors = dev->cylinders * dev->heads * dev->sectors; + dev->cylinders = id[1]; + dev->heads = id[3]; + dev->sectors = id[6]; - if (ata_id_current_chs_valid(dev->id)) { + if (ata_id_current_chs_valid(id)) { /* Current CHS translation is valid. */ - dev->cylinders = dev->id[54]; - dev->heads = dev->id[55]; - dev->sectors = dev->id[56]; - - dev->n_sectors = ata_id_u32(dev->id, 57); + dev->cylinders = id[54]; + dev->heads = id[55]; + dev->sectors = id[56]; } /* print device info to dmesg */ - printk(KERN_INFO "ata%u: dev %u ATA-%d, max %s, %Lu sectors: CHS %d/%d/%d\n", - ap->id, device, - major_version, - ata_mode_string(xfer_modes), - (unsigned long long)dev->n_sectors, - (int)dev->cylinders, (int)dev->heads, (int)dev->sectors); - + if (print_info) + printk(KERN_INFO "ata%u: dev %u ATA-%d, " + "max %s, %Lu sectors: CHS %u/%u/%u\n", + ap->id, dev->devno, + ata_id_major_version(id), + ata_mode_string(xfer_mask), + (unsigned long long)dev->n_sectors, + dev->cylinders, dev->heads, dev->sectors); } - ap->host->max_cmd_len = 16; + dev->cdb_len = 16; } /* ATAPI-specific feature tests */ else if (dev->class == ATA_DEV_ATAPI) { - if (ata_id_is_ata(dev->id)) /* sanity check */ - goto err_out_nosup; - - rc = atapi_cdb_len(dev->id); + rc = atapi_cdb_len(id); if ((rc < 12) || (rc > ATAPI_CDB_LEN)) { printk(KERN_WARNING "ata%u: unsupported CDB len\n", ap->id); + rc = -EINVAL; goto err_out_nosup; } - ap->cdb_len = (unsigned int) rc; - ap->host->max_cmd_len = (unsigned char) ap->cdb_len; + dev->cdb_len = (unsigned int) rc; /* print device info to dmesg */ - printk(KERN_INFO "ata%u: dev %u ATAPI, max %s\n", - ap->id, device, - ata_mode_string(xfer_modes)); + if (print_info) + printk(KERN_INFO "ata%u: dev %u ATAPI, max %s\n", + ap->id, dev->devno, ata_mode_string(xfer_mask)); } - DPRINTK("EXIT, drv_stat = 0x%x\n", ata_chk_status(ap)); - return; - -err_out_nosup: - printk(KERN_WARNING "ata%u: dev %u not supported, ignoring\n", - ap->id, device); -err_out: - dev->class++; /* converts ATA_DEV_xxx into ATA_DEV_xxx_UNSUP */ - DPRINTK("EXIT, err\n"); -} - - -static inline u8 ata_dev_knobble(const struct ata_port *ap) -{ - return ((ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(ap->device->id))); -} - -/** - * ata_dev_config - Run device specific handlers and check for - * SATA->PATA bridges - * @ap: Bus - * @i: Device - * - * LOCKING: - */ + ap->host->max_cmd_len = 0; + for (i = 0; i < ATA_MAX_DEVICES; i++) + ap->host->max_cmd_len = max_t(unsigned int, + ap->host->max_cmd_len, + ap->device[i].cdb_len); -void ata_dev_config(struct ata_port *ap, unsigned int i) -{ /* limit bridge transfers to udma5, 200 sectors */ - if (ata_dev_knobble(ap)) { - printk(KERN_INFO "ata%u(%u): applying bridge limits\n", - ap->id, ap->device->devno); + if (ata_dev_knobble(ap, dev)) { + if (print_info) + printk(KERN_INFO "ata%u(%u): applying bridge limits\n", + ap->id, dev->devno); ap->udma_mask &= ATA_UDMA5; - ap->host->max_sectors = ATA_MAX_SECTORS; - ap->host->hostt->max_sectors = ATA_MAX_SECTORS; - ap->device[i].flags |= ATA_DFLAG_LOCK_SECTORS; + dev->max_sectors = ATA_MAX_SECTORS; } if (ap->ops->dev_config) - ap->ops->dev_config(ap, &ap->device[i]); + ap->ops->dev_config(ap, dev); + + DPRINTK("EXIT, drv_stat = 0x%x\n", ata_chk_status(ap)); + return 0; + +err_out_nosup: + printk(KERN_WARNING "ata%u: dev %u not supported, ignoring\n", + ap->id, dev->devno); + DPRINTK("EXIT, err\n"); + return rc; } /** @@ -1484,21 +1344,59 @@ void ata_dev_config(struct ata_port *ap, unsigned int i) static int ata_bus_probe(struct ata_port *ap) { - unsigned int i, found = 0; + unsigned int classes[ATA_MAX_DEVICES]; + unsigned int i, rc, found = 0; - ap->ops->phy_reset(ap); - if (ap->flags & ATA_FLAG_PORT_DISABLED) - goto err_out; + ata_port_probe(ap); + + /* reset and determine device classes */ + for (i = 0; i < ATA_MAX_DEVICES; i++) + classes[i] = ATA_DEV_UNKNOWN; + + if (ap->ops->probe_reset) { + rc = ap->ops->probe_reset(ap, classes); + if (rc) { + printk("ata%u: reset failed (errno=%d)\n", ap->id, rc); + return rc; + } + } else { + ap->ops->phy_reset(ap); + + if (!(ap->flags & ATA_FLAG_PORT_DISABLED)) + for (i = 0; i < ATA_MAX_DEVICES; i++) + classes[i] = ap->device[i].class; + + ata_port_probe(ap); + } + for (i = 0; i < ATA_MAX_DEVICES; i++) + if (classes[i] == ATA_DEV_UNKNOWN) + classes[i] = ATA_DEV_NONE; + + /* read IDENTIFY page and configure devices */ for (i = 0; i < ATA_MAX_DEVICES; i++) { - ata_dev_identify(ap, i); - if (ata_dev_present(&ap->device[i])) { - found = 1; - ata_dev_config(ap,i); + struct ata_device *dev = &ap->device[i]; + + dev->class = classes[i]; + + if (!ata_dev_present(dev)) + continue; + + WARN_ON(dev->id != NULL); + if (ata_dev_read_id(ap, dev, &dev->class, 1, &dev->id)) { + dev->class = ATA_DEV_NONE; + continue; + } + + if (ata_dev_configure(ap, dev, 1)) { + dev->class++; /* disable device */ + continue; } + + found = 1; } - if ((!found) || (ap->flags & ATA_FLAG_PORT_DISABLED)) + if (!found) goto err_out_disable; ata_set_mode(ap); @@ -1509,7 +1407,6 @@ static int ata_bus_probe(struct ata_port *ap) err_out_disable: ap->ops->port_disable(ap); -err_out: return -1; } @@ -1530,6 +1427,41 @@ void ata_port_probe(struct ata_port *ap) } /** + * sata_print_link_status - Print SATA link status + * @ap: SATA port to printk link status about + * + * This function prints link speed and status of a SATA link. + * + * LOCKING: + * None. + */ +static void sata_print_link_status(struct ata_port *ap) +{ + u32 sstatus, tmp; + const char *speed; + + if (!ap->ops->scr_read) + return; + + sstatus = scr_read(ap, SCR_STATUS); + + if (sata_dev_present(ap)) { + tmp = (sstatus >> 4) & 0xf; + if (tmp & (1 << 0)) + speed = "1.5"; + else if (tmp & (1 << 1)) + speed = "3.0"; + else + speed = "<unknown>"; + printk(KERN_INFO "ata%u: SATA link up %s Gbps (SStatus %X)\n", + ap->id, speed, sstatus); + } else { + printk(KERN_INFO "ata%u: SATA link down (SStatus %X)\n", + ap->id, sstatus); + } +} + +/** * __sata_phy_reset - Wake/reset a low-level SATA PHY * @ap: SATA port associated with target SATA PHY. * @@ -1563,27 +1495,14 @@ void __sata_phy_reset(struct ata_port *ap) break; } while (time_before(jiffies, timeout)); - /* TODO: phy layer with polling, timeouts, etc. */ - sstatus = scr_read(ap, SCR_STATUS); - if (sata_dev_present(ap)) { - const char *speed; - u32 tmp; + /* print link status */ + sata_print_link_status(ap); - tmp = (sstatus >> 4) & 0xf; - if (tmp & (1 << 0)) - speed = "1.5"; - else if (tmp & (1 << 1)) - speed = "3.0"; - else - speed = "<unknown>"; - printk(KERN_INFO "ata%u: SATA link up %s Gbps (SStatus %X)\n", - ap->id, speed, sstatus); + /* TODO: phy layer with polling, timeouts, etc. */ + if (sata_dev_present(ap)) ata_port_probe(ap); - } else { - printk(KERN_INFO "ata%u: SATA link down (SStatus %X)\n", - ap->id, sstatus); + else ata_port_disable(ap); - } if (ap->flags & ATA_FLAG_PORT_DISABLED) return; @@ -1756,9 +1675,9 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed, ata_timing_quantize(t, t, T, UT); /* - * Even in DMA/UDMA modes we still use PIO access for IDENTIFY, S.M.A.R.T - * and some other commands. We have to ensure that the DMA cycle timing is - * slower/equal than the fastest PIO timing. + * Even in DMA/UDMA modes we still use PIO access for IDENTIFY, + * S.M.A.R.T * and some other commands. We have to ensure that the + * DMA cycle timing is slower/equal than the fastest PIO timing. */ if (speed > XFER_PIO_4) { @@ -1767,7 +1686,7 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed, } /* - * Lenghten active & recovery time so that cycle time is correct. + * Lengthen active & recovery time so that cycle time is correct. */ if (t->act8b + t->rec8b < t->cyc8b) { @@ -1783,31 +1702,8 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed, return 0; } -static const struct { - unsigned int shift; - u8 base; -} xfer_mode_classes[] = { - { ATA_SHIFT_UDMA, XFER_UDMA_0 }, - { ATA_SHIFT_MWDMA, XFER_MW_DMA_0 }, - { ATA_SHIFT_PIO, XFER_PIO_0 }, -}; - -static u8 base_from_shift(unsigned int shift) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(xfer_mode_classes); i++) - if (xfer_mode_classes[i].shift == shift) - return xfer_mode_classes[i].base; - - return 0xff; -} - static void ata_dev_set_mode(struct ata_port *ap, struct ata_device *dev) { - int ofs, idx; - u8 base; - if (!ata_dev_present(dev) || (ap->flags & ATA_FLAG_PORT_DISABLED)) return; @@ -1816,65 +1712,58 @@ static void ata_dev_set_mode(struct ata_port *ap, struct ata_device *dev) ata_dev_set_xfermode(ap, dev); - base = base_from_shift(dev->xfer_shift); - ofs = dev->xfer_mode - base; - idx = ofs + dev->xfer_shift; - WARN_ON(idx >= ARRAY_SIZE(xfer_mode_str)); + if (ata_dev_revalidate(ap, dev, 0)) { + printk(KERN_ERR "ata%u: failed to revalidate after set " + "xfermode, disabled\n", ap->id); + ata_port_disable(ap); + } - DPRINTK("idx=%d xfer_shift=%u, xfer_mode=0x%x, base=0x%x, offset=%d\n", - idx, dev->xfer_shift, (int)dev->xfer_mode, (int)base, ofs); + DPRINTK("xfer_shift=%u, xfer_mode=0x%x\n", + dev->xfer_shift, (int)dev->xfer_mode); printk(KERN_INFO "ata%u: dev %u configured for %s\n", - ap->id, dev->devno, xfer_mode_str[idx]); + ap->id, dev->devno, + ata_mode_string(ata_xfer_mode2mask(dev->xfer_mode))); } static int ata_host_set_pio(struct ata_port *ap) { - unsigned int mask; - int x, i; - u8 base, xfer_mode; - - mask = ata_get_mode_mask(ap, ATA_SHIFT_PIO); - x = fgb(mask); - if (x < 0) { - printk(KERN_WARNING "ata%u: no PIO support\n", ap->id); - return -1; - } - - base = base_from_shift(ATA_SHIFT_PIO); - xfer_mode = base + x; - - DPRINTK("base 0x%x xfer_mode 0x%x mask 0x%x x %d\n", - (int)base, (int)xfer_mode, mask, x); + int i; for (i = 0; i < ATA_MAX_DEVICES; i++) { struct ata_device *dev = &ap->device[i]; - if (ata_dev_present(dev)) { - dev->pio_mode = xfer_mode; - dev->xfer_mode = xfer_mode; - dev->xfer_shift = ATA_SHIFT_PIO; - if (ap->ops->set_piomode) - ap->ops->set_piomode(ap, dev); + + if (!ata_dev_present(dev)) + continue; + + if (!dev->pio_mode) { + printk(KERN_WARNING "ata%u: no PIO support\n", ap->id); + return -1; } + + dev->xfer_mode = dev->pio_mode; + dev->xfer_shift = ATA_SHIFT_PIO; + if (ap->ops->set_piomode) + ap->ops->set_piomode(ap, dev); } return 0; } -static void ata_host_set_dma(struct ata_port *ap, u8 xfer_mode, - unsigned int xfer_shift) +static void ata_host_set_dma(struct ata_port *ap) { int i; for (i = 0; i < ATA_MAX_DEVICES; i++) { struct ata_device *dev = &ap->device[i]; - if (ata_dev_present(dev)) { - dev->dma_mode = xfer_mode; - dev->xfer_mode = xfer_mode; - dev->xfer_shift = xfer_shift; - if (ap->ops->set_dmamode) - ap->ops->set_dmamode(ap, dev); - } + + if (!ata_dev_present(dev) || !dev->dma_mode) + continue; + + dev->xfer_mode = dev->dma_mode; + dev->xfer_shift = ata_xfer_mode2shift(dev->dma_mode); + if (ap->ops->set_dmamode) + ap->ops->set_dmamode(ap, dev); } } @@ -1886,32 +1775,37 @@ static void ata_host_set_dma(struct ata_port *ap, u8 xfer_mode, * * LOCKING: * PCI/etc. bus probe sem. - * */ static void ata_set_mode(struct ata_port *ap) { - unsigned int xfer_shift; - u8 xfer_mode; - int rc; + int i, rc; - /* step 1: always set host PIO timings */ - rc = ata_host_set_pio(ap); - if (rc) - goto err_out; + /* step 1: calculate xfer_mask */ + for (i = 0; i < ATA_MAX_DEVICES; i++) { + struct ata_device *dev = &ap->device[i]; + unsigned int xfer_mask; - /* step 2: choose the best data xfer mode */ - xfer_mode = xfer_shift = 0; - rc = ata_choose_xfer_mode(ap, &xfer_mode, &xfer_shift); + if (!ata_dev_present(dev)) + continue; + + xfer_mask = ata_dev_xfermask(ap, dev); + + dev->pio_mode = ata_xfer_mask2mode(xfer_mask & ATA_MASK_PIO); + dev->dma_mode = ata_xfer_mask2mode(xfer_mask & (ATA_MASK_MWDMA | + ATA_MASK_UDMA)); + } + + /* step 2: always set host PIO timings */ + rc = ata_host_set_pio(ap); if (rc) goto err_out; - /* step 3: if that xfer mode isn't PIO, set host DMA timings */ - if (xfer_shift != ATA_SHIFT_PIO) - ata_host_set_dma(ap, xfer_mode, xfer_shift); + /* step 3: set host DMA timings */ + ata_host_set_dma(ap); /* step 4: update devices' xfer mode */ - ata_dev_set_mode(ap, &ap->device[0]); - ata_dev_set_mode(ap, &ap->device[1]); + for (i = 0; i < ATA_MAX_DEVICES; i++) + ata_dev_set_mode(ap, &ap->device[i]); if (ap->flags & ATA_FLAG_PORT_DISABLED) return; @@ -1926,6 +1820,26 @@ err_out: } /** + * ata_tf_to_host - issue ATA taskfile to host controller + * @ap: port to which command is being issued + * @tf: ATA taskfile register set + * + * Issues ATA taskfile register set to ATA host controller, + * with proper synchronization with interrupt handler and + * other threads. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + +static inline void ata_tf_to_host(struct ata_port *ap, + const struct ata_taskfile *tf) +{ + ap->ops->tf_load(ap, tf); + ap->ops->exec_command(ap, tf); +} + +/** * ata_busy_sleep - sleep until BSY clears, or timeout * @ap: port containing status register to be polled * @tmout_pat: impatience timeout @@ -1935,12 +1849,10 @@ err_out: * or a timeout occurs. * * LOCKING: None. - * */ -static unsigned int ata_busy_sleep (struct ata_port *ap, - unsigned long tmout_pat, - unsigned long tmout) +unsigned int ata_busy_sleep (struct ata_port *ap, + unsigned long tmout_pat, unsigned long tmout) { unsigned long timer_start, timeout; u8 status; @@ -2159,9 +2071,9 @@ void ata_bus_reset(struct ata_port *ap) /* * determine by signature whether we have ATA or ATAPI devices */ - err = ata_dev_try_classify(ap, 0); + ap->device[0].class = ata_dev_try_classify(ap, 0, &err); if ((slave_possible) && (err != 0x81)) - ata_dev_try_classify(ap, 1); + ap->device[1].class = ata_dev_try_classify(ap, 1, &err); /* re-enable interrupts */ if (ap->ioaddr.ctl_addr) /* FIXME: hack. create a hook instead */ @@ -2196,11 +2108,446 @@ err_out: DPRINTK("EXIT\n"); } -static void ata_pr_blacklisted(const struct ata_port *ap, - const struct ata_device *dev) +static int sata_phy_resume(struct ata_port *ap) { - printk(KERN_WARNING "ata%u: dev %u is on DMA blacklist, disabling DMA\n", - ap->id, dev->devno); + unsigned long timeout = jiffies + (HZ * 5); + u32 sstatus; + + scr_write_flush(ap, SCR_CONTROL, 0x300); + + /* Wait for phy to become ready, if necessary. */ + do { + msleep(200); + sstatus = scr_read(ap, SCR_STATUS); + if ((sstatus & 0xf) != 1) + return 0; + } while (time_before(jiffies, timeout)); + + return -1; +} + +/** + * ata_std_probeinit - initialize probing + * @ap: port to be probed + * + * @ap is about to be probed. Initialize it. This function is + * to be used as standard callback for ata_drive_probe_reset(). + * + * NOTE!!! Do not use this function as probeinit if a low level + * driver implements only hardreset. Just pass NULL as probeinit + * in that case. Using this function is probably okay but doing + * so makes reset sequence different from the original + * ->phy_reset implementation and Jeff nervous. :-P + */ +extern void ata_std_probeinit(struct ata_port *ap) +{ + if (ap->flags & ATA_FLAG_SATA && ap->ops->scr_read) { + sata_phy_resume(ap); + if (sata_dev_present(ap)) + ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT); + } +} + +/** + * ata_std_softreset - reset host port via ATA SRST + * @ap: port to reset + * @verbose: fail verbosely + * @classes: resulting classes of attached devices + * + * Reset host port using ATA SRST. This function is to be used + * as standard callback for ata_drive_*_reset() functions. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +int ata_std_softreset(struct ata_port *ap, int verbose, unsigned int *classes) +{ + unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS; + unsigned int devmask = 0, err_mask; + u8 err; + + DPRINTK("ENTER\n"); + + if (ap->ops->scr_read && !sata_dev_present(ap)) { + classes[0] = ATA_DEV_NONE; + goto out; + } + + /* determine if device 0/1 are present */ + if (ata_devchk(ap, 0)) + devmask |= (1 << 0); + if (slave_possible && ata_devchk(ap, 1)) + devmask |= (1 << 1); + + /* select device 0 again */ + ap->ops->dev_select(ap, 0); + + /* issue bus reset */ + DPRINTK("about to softreset, devmask=%x\n", devmask); + err_mask = ata_bus_softreset(ap, devmask); + if (err_mask) { + if (verbose) + printk(KERN_ERR "ata%u: SRST failed (err_mask=0x%x)\n", + ap->id, err_mask); + else + DPRINTK("EXIT, softreset failed (err_mask=0x%x)\n", + err_mask); + return -EIO; + } + + /* determine by signature whether we have ATA or ATAPI devices */ + classes[0] = ata_dev_try_classify(ap, 0, &err); + if (slave_possible && err != 0x81) + classes[1] = ata_dev_try_classify(ap, 1, &err); + + out: + DPRINTK("EXIT, classes[0]=%u [1]=%u\n", classes[0], classes[1]); + return 0; +} + +/** + * sata_std_hardreset - reset host port via SATA phy reset + * @ap: port to reset + * @verbose: fail verbosely + * @class: resulting class of attached device + * + * SATA phy-reset host port using DET bits of SControl register. + * This function is to be used as standard callback for + * ata_drive_*_reset(). + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +int sata_std_hardreset(struct ata_port *ap, int verbose, unsigned int *class) +{ + DPRINTK("ENTER\n"); + + /* Issue phy wake/reset */ + scr_write_flush(ap, SCR_CONTROL, 0x301); + + /* + * Couldn't find anything in SATA I/II specs, but AHCI-1.1 + * 10.4.2 says at least 1 ms. + */ + msleep(1); + + /* Bring phy back */ + sata_phy_resume(ap); + + /* TODO: phy layer with polling, timeouts, etc. */ + if (!sata_dev_present(ap)) { + *class = ATA_DEV_NONE; + DPRINTK("EXIT, link offline\n"); + return 0; + } + + if (ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT)) { + if (verbose) + printk(KERN_ERR "ata%u: COMRESET failed " + "(device not ready)\n", ap->id); + else + DPRINTK("EXIT, device not ready\n"); + return -EIO; + } + + ap->ops->dev_select(ap, 0); /* probably unnecessary */ + + *class = ata_dev_try_classify(ap, 0, NULL); + + DPRINTK("EXIT, class=%u\n", *class); + return 0; +} + +/** + * ata_std_postreset - standard postreset callback + * @ap: the target ata_port + * @classes: classes of attached devices + * + * This function is invoked after a successful reset. Note that + * the device might have been reset more than once using + * different reset methods before postreset is invoked. + * + * This function is to be used as standard callback for + * ata_drive_*_reset(). + * + * LOCKING: + * Kernel thread context (may sleep) + */ +void ata_std_postreset(struct ata_port *ap, unsigned int *classes) +{ + DPRINTK("ENTER\n"); + + /* set cable type if it isn't already set */ + if (ap->cbl == ATA_CBL_NONE && ap->flags & ATA_FLAG_SATA) + ap->cbl = ATA_CBL_SATA; + + /* print link status */ + if (ap->cbl == ATA_CBL_SATA) + sata_print_link_status(ap); + + /* re-enable interrupts */ + if (ap->ioaddr.ctl_addr) /* FIXME: hack. create a hook instead */ + ata_irq_on(ap); + + /* is double-select really necessary? */ + if (classes[0] != ATA_DEV_NONE) + ap->ops->dev_select(ap, 1); + if (classes[1] != ATA_DEV_NONE) + ap->ops->dev_select(ap, 0); + + /* bail out if no device is present */ + if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) { + DPRINTK("EXIT, no device\n"); + return; + } + + /* set up device control */ + if (ap->ioaddr.ctl_addr) { + if (ap->flags & ATA_FLAG_MMIO) + writeb(ap->ctl, (void __iomem *) ap->ioaddr.ctl_addr); + else + outb(ap->ctl, ap->ioaddr.ctl_addr); + } + + DPRINTK("EXIT\n"); +} + +/** + * ata_std_probe_reset - standard probe reset method + * @ap: prot to perform probe-reset + * @classes: resulting classes of attached devices + * + * The stock off-the-shelf ->probe_reset method. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +int ata_std_probe_reset(struct ata_port *ap, unsigned int *classes) +{ + ata_reset_fn_t hardreset; + + hardreset = NULL; + if (ap->flags & ATA_FLAG_SATA && ap->ops->scr_read) + hardreset = sata_std_hardreset; + + return ata_drive_probe_reset(ap, ata_std_probeinit, + ata_std_softreset, hardreset, + ata_std_postreset, classes); +} + +static int do_probe_reset(struct ata_port *ap, ata_reset_fn_t reset, + ata_postreset_fn_t postreset, + unsigned int *classes) +{ + int i, rc; + + for (i = 0; i < ATA_MAX_DEVICES; i++) + classes[i] = ATA_DEV_UNKNOWN; + + rc = reset(ap, 0, classes); + if (rc) + return rc; + + /* If any class isn't ATA_DEV_UNKNOWN, consider classification + * is complete and convert all ATA_DEV_UNKNOWN to + * ATA_DEV_NONE. + */ + for (i = 0; i < ATA_MAX_DEVICES; i++) + if (classes[i] != ATA_DEV_UNKNOWN) + break; + + if (i < ATA_MAX_DEVICES) + for (i = 0; i < ATA_MAX_DEVICES; i++) + if (classes[i] == ATA_DEV_UNKNOWN) + classes[i] = ATA_DEV_NONE; + + if (postreset) + postreset(ap, classes); + + return classes[0] != ATA_DEV_UNKNOWN ? 0 : -ENODEV; +} + +/** + * ata_drive_probe_reset - Perform probe reset with given methods + * @ap: port to reset + * @probeinit: probeinit method (can be NULL) + * @softreset: softreset method (can be NULL) + * @hardreset: hardreset method (can be NULL) + * @postreset: postreset method (can be NULL) + * @classes: resulting classes of attached devices + * + * Reset the specified port and classify attached devices using + * given methods. This function prefers softreset but tries all + * possible reset sequences to reset and classify devices. This + * function is intended to be used for constructing ->probe_reset + * callback by low level drivers. + * + * Reset methods should follow the following rules. + * + * - Return 0 on sucess, -errno on failure. + * - If classification is supported, fill classes[] with + * recognized class codes. + * - If classification is not supported, leave classes[] alone. + * - If verbose is non-zero, print error message on failure; + * otherwise, shut up. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -EINVAL if no reset method is avaliable, -ENODEV + * if classification fails, and any error code from reset + * methods. + */ +int ata_drive_probe_reset(struct ata_port *ap, ata_probeinit_fn_t probeinit, + ata_reset_fn_t softreset, ata_reset_fn_t hardreset, + ata_postreset_fn_t postreset, unsigned int *classes) +{ + int rc = -EINVAL; + + if (probeinit) + probeinit(ap); + + if (softreset) { + rc = do_probe_reset(ap, softreset, postreset, classes); + if (rc == 0) + return 0; + } + + if (!hardreset) + return rc; + + rc = do_probe_reset(ap, hardreset, postreset, classes); + if (rc == 0 || rc != -ENODEV) + return rc; + + if (softreset) + rc = do_probe_reset(ap, softreset, postreset, classes); + + return rc; +} + +/** + * ata_dev_same_device - Determine whether new ID matches configured device + * @ap: port on which the device to compare against resides + * @dev: device to compare against + * @new_class: class of the new device + * @new_id: IDENTIFY page of the new device + * + * Compare @new_class and @new_id against @dev and determine + * whether @dev is the device indicated by @new_class and + * @new_id. + * + * LOCKING: + * None. + * + * RETURNS: + * 1 if @dev matches @new_class and @new_id, 0 otherwise. + */ +static int ata_dev_same_device(struct ata_port *ap, struct ata_device *dev, + unsigned int new_class, const u16 *new_id) +{ + const u16 *old_id = dev->id; + unsigned char model[2][41], serial[2][21]; + u64 new_n_sectors; + + if (dev->class != new_class) { + printk(KERN_INFO + "ata%u: dev %u class mismatch %d != %d\n", + ap->id, dev->devno, dev->class, new_class); + return 0; + } + + ata_id_c_string(old_id, model[0], ATA_ID_PROD_OFS, sizeof(model[0])); + ata_id_c_string(new_id, model[1], ATA_ID_PROD_OFS, sizeof(model[1])); + ata_id_c_string(old_id, serial[0], ATA_ID_SERNO_OFS, sizeof(serial[0])); + ata_id_c_string(new_id, serial[1], ATA_ID_SERNO_OFS, sizeof(serial[1])); + new_n_sectors = ata_id_n_sectors(new_id); + + if (strcmp(model[0], model[1])) { + printk(KERN_INFO + "ata%u: dev %u model number mismatch '%s' != '%s'\n", + ap->id, dev->devno, model[0], model[1]); + return 0; + } + + if (strcmp(serial[0], serial[1])) { + printk(KERN_INFO + "ata%u: dev %u serial number mismatch '%s' != '%s'\n", + ap->id, dev->devno, serial[0], serial[1]); + return 0; + } + + if (dev->class == ATA_DEV_ATA && dev->n_sectors != new_n_sectors) { + printk(KERN_INFO + "ata%u: dev %u n_sectors mismatch %llu != %llu\n", + ap->id, dev->devno, (unsigned long long)dev->n_sectors, + (unsigned long long)new_n_sectors); + return 0; + } + + return 1; +} + +/** + * ata_dev_revalidate - Revalidate ATA device + * @ap: port on which the device to revalidate resides + * @dev: device to revalidate + * @post_reset: is this revalidation after reset? + * + * Re-read IDENTIFY page and make sure @dev is still attached to + * the port. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, negative errno otherwise + */ +int ata_dev_revalidate(struct ata_port *ap, struct ata_device *dev, + int post_reset) +{ + unsigned int class; + u16 *id; + int rc; + + if (!ata_dev_present(dev)) + return -ENODEV; + + class = dev->class; + id = NULL; + + /* allocate & read ID data */ + rc = ata_dev_read_id(ap, dev, &class, post_reset, &id); + if (rc) + goto fail; + + /* is the device still there? */ + if (!ata_dev_same_device(ap, dev, class, id)) { + rc = -ENODEV; + goto fail; + } + + kfree(dev->id); + dev->id = id; + + /* configure device according to the new ID */ + return ata_dev_configure(ap, dev, 0); + + fail: + printk(KERN_ERR "ata%u: dev %u revalidation failed (errno=%d)\n", + ap->id, dev->devno, rc); + kfree(id); + return rc; } static const char * const ata_dma_blacklist [] = { @@ -2237,151 +2584,57 @@ static const char * const ata_dma_blacklist [] = { static int ata_dma_blacklisted(const struct ata_device *dev) { - unsigned char model_num[40]; - char *s; - unsigned int len; + unsigned char model_num[41]; int i; - ata_dev_id_string(dev->id, model_num, ATA_ID_PROD_OFS, - sizeof(model_num)); - s = &model_num[0]; - len = strnlen(s, sizeof(model_num)); - - /* ATAPI specifies that empty space is blank-filled; remove blanks */ - while ((len > 0) && (s[len - 1] == ' ')) { - len--; - s[len] = 0; - } + ata_id_c_string(dev->id, model_num, ATA_ID_PROD_OFS, sizeof(model_num)); for (i = 0; i < ARRAY_SIZE(ata_dma_blacklist); i++) - if (!strncmp(ata_dma_blacklist[i], s, len)) + if (!strcmp(ata_dma_blacklist[i], model_num)) return 1; return 0; } -static unsigned int ata_get_mode_mask(const struct ata_port *ap, int shift) -{ - const struct ata_device *master, *slave; - unsigned int mask; - - master = &ap->device[0]; - slave = &ap->device[1]; - - assert (ata_dev_present(master) || ata_dev_present(slave)); - - if (shift == ATA_SHIFT_UDMA) { - mask = ap->udma_mask; - if (ata_dev_present(master)) { - mask &= (master->id[ATA_ID_UDMA_MODES] & 0xff); - if (ata_dma_blacklisted(master)) { - mask = 0; - ata_pr_blacklisted(ap, master); - } - } - if (ata_dev_present(slave)) { - mask &= (slave->id[ATA_ID_UDMA_MODES] & 0xff); - if (ata_dma_blacklisted(slave)) { - mask = 0; - ata_pr_blacklisted(ap, slave); - } - } - } - else if (shift == ATA_SHIFT_MWDMA) { - mask = ap->mwdma_mask; - if (ata_dev_present(master)) { - mask &= (master->id[ATA_ID_MWDMA_MODES] & 0x07); - if (ata_dma_blacklisted(master)) { - mask = 0; - ata_pr_blacklisted(ap, master); - } - } - if (ata_dev_present(slave)) { - mask &= (slave->id[ATA_ID_MWDMA_MODES] & 0x07); - if (ata_dma_blacklisted(slave)) { - mask = 0; - ata_pr_blacklisted(ap, slave); - } - } - } - else if (shift == ATA_SHIFT_PIO) { - mask = ap->pio_mask; - if (ata_dev_present(master)) { - /* spec doesn't return explicit support for - * PIO0-2, so we fake it - */ - u16 tmp_mode = master->id[ATA_ID_PIO_MODES] & 0x03; - tmp_mode <<= 3; - tmp_mode |= 0x7; - mask &= tmp_mode; - } - if (ata_dev_present(slave)) { - /* spec doesn't return explicit support for - * PIO0-2, so we fake it - */ - u16 tmp_mode = slave->id[ATA_ID_PIO_MODES] & 0x03; - tmp_mode <<= 3; - tmp_mode |= 0x7; - mask &= tmp_mode; - } - } - else { - mask = 0xffffffff; /* shut up compiler warning */ - BUG(); - } - - return mask; -} - -/* find greatest bit */ -static int fgb(u32 bitmap) -{ - unsigned int i; - int x = -1; - - for (i = 0; i < 32; i++) - if (bitmap & (1 << i)) - x = i; - - return x; -} - /** - * ata_choose_xfer_mode - attempt to find best transfer mode - * @ap: Port for which an xfer mode will be selected - * @xfer_mode_out: (output) SET FEATURES - XFER MODE code - * @xfer_shift_out: (output) bit shift that selects this mode + * ata_dev_xfermask - Compute supported xfermask of the given device + * @ap: Port on which the device to compute xfermask for resides + * @dev: Device to compute xfermask for * - * Based on host and device capabilities, determine the - * maximum transfer mode that is amenable to all. + * Compute supported xfermask of @dev. This function is + * responsible for applying all known limits including host + * controller limits, device blacklist, etc... * * LOCKING: - * PCI/etc. bus probe sem. + * None. * * RETURNS: - * Zero on success, negative on error. + * Computed xfermask. */ - -static int ata_choose_xfer_mode(const struct ata_port *ap, - u8 *xfer_mode_out, - unsigned int *xfer_shift_out) +static unsigned int ata_dev_xfermask(struct ata_port *ap, + struct ata_device *dev) { - unsigned int mask, shift; - int x, i; + unsigned long xfer_mask; + int i; - for (i = 0; i < ARRAY_SIZE(xfer_mode_classes); i++) { - shift = xfer_mode_classes[i].shift; - mask = ata_get_mode_mask(ap, shift); + xfer_mask = ata_pack_xfermask(ap->pio_mask, ap->mwdma_mask, + ap->udma_mask); - x = fgb(mask); - if (x >= 0) { - *xfer_mode_out = xfer_mode_classes[i].base + x; - *xfer_shift_out = shift; - return 0; - } + /* use port-wide xfermask for now */ + for (i = 0; i < ATA_MAX_DEVICES; i++) { + struct ata_device *d = &ap->device[i]; + if (!ata_dev_present(d)) + continue; + xfer_mask &= ata_id_xfermask(d->id); + if (ata_dma_blacklisted(d)) + xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); } - return -1; + if (ata_dma_blacklisted(dev)) + printk(KERN_WARNING "ata%u: dev %u is on DMA blacklist, " + "disabling DMA\n", ap->id, dev->devno); + + return xfer_mask; } /** @@ -2420,63 +2673,28 @@ static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev) } /** - * ata_dev_reread_id - Reread the device identify device info - * @ap: port where the device is - * @dev: device to reread the identify device info - * - * LOCKING: - */ - -static void ata_dev_reread_id(struct ata_port *ap, struct ata_device *dev) -{ - struct ata_taskfile tf; - - ata_tf_init(ap, &tf, dev->devno); - - if (dev->class == ATA_DEV_ATA) { - tf.command = ATA_CMD_ID_ATA; - DPRINTK("do ATA identify\n"); - } else { - tf.command = ATA_CMD_ID_ATAPI; - DPRINTK("do ATAPI identify\n"); - } - - tf.flags |= ATA_TFLAG_DEVICE; - tf.protocol = ATA_PROT_PIO; - - if (ata_exec_internal(ap, dev, &tf, DMA_FROM_DEVICE, - dev->id, sizeof(dev->id))) - goto err_out; - - swap_buf_le16(dev->id, ATA_ID_WORDS); - - ata_dump_id(dev); - - DPRINTK("EXIT\n"); - - return; -err_out: - printk(KERN_ERR "ata%u: failed to reread ID, disabled\n", ap->id); - ata_port_disable(ap); -} - -/** * ata_dev_init_params - Issue INIT DEV PARAMS command * @ap: Port associated with device @dev * @dev: Device to which command will be sent * * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, AC_ERR_* mask otherwise. */ -static void ata_dev_init_params(struct ata_port *ap, struct ata_device *dev) +static unsigned int ata_dev_init_params(struct ata_port *ap, + struct ata_device *dev) { struct ata_taskfile tf; + unsigned int err_mask; u16 sectors = dev->id[6]; u16 heads = dev->id[3]; /* Number of sectors per track 1-255. Number of heads 1-16 */ if (sectors < 1 || sectors > 255 || heads < 1 || heads > 16) - return; + return 0; /* set up init dev params taskfile */ DPRINTK("init dev params \n"); @@ -2488,13 +2706,10 @@ static void ata_dev_init_params(struct ata_port *ap, struct ata_device *dev) tf.nsect = sectors; tf.device |= (heads - 1) & 0x0f; /* max head = num. of heads - 1 */ - if (ata_exec_internal(ap, dev, &tf, DMA_NONE, NULL, 0)) { - printk(KERN_ERR "ata%u: failed to init parameters, disabled\n", - ap->id); - ata_port_disable(ap); - } + err_mask = ata_exec_internal(ap, dev, &tf, DMA_NONE, NULL, 0); - DPRINTK("EXIT\n"); + DPRINTK("EXIT, err_mask=%x\n", err_mask); + return err_mask; } /** @@ -2514,11 +2729,11 @@ static void ata_sg_clean(struct ata_queued_cmd *qc) int dir = qc->dma_dir; void *pad_buf = NULL; - assert(qc->flags & ATA_QCFLAG_DMAMAP); - assert(sg != NULL); + WARN_ON(!(qc->flags & ATA_QCFLAG_DMAMAP)); + WARN_ON(sg == NULL); if (qc->flags & ATA_QCFLAG_SINGLE) - assert(qc->n_elem <= 1); + WARN_ON(qc->n_elem > 1); VPRINTK("unmapping %u sg elements\n", qc->n_elem); @@ -2573,8 +2788,8 @@ static void ata_fill_sg(struct ata_queued_cmd *qc) struct scatterlist *sg; unsigned int idx; - assert(qc->__sg != NULL); - assert(qc->n_elem > 0 || qc->pad_len > 0); + WARN_ON(qc->__sg == NULL); + WARN_ON(qc->n_elem == 0 && qc->pad_len == 0); idx = 0; ata_for_each_sg(sg, qc) { @@ -2727,7 +2942,7 @@ static int ata_sg_setup_one(struct ata_queued_cmd *qc) void *pad_buf = ap->pad + (qc->tag * ATA_DMA_PAD_SZ); struct scatterlist *psg = &qc->pad_sgent; - assert(qc->dev->class == ATA_DEV_ATAPI); + WARN_ON(qc->dev->class != ATA_DEV_ATAPI); memset(pad_buf, 0, ATA_DMA_PAD_SZ); @@ -2791,7 +3006,7 @@ static int ata_sg_setup(struct ata_queued_cmd *qc) int n_elem, pre_n_elem, dir, trim_sg = 0; VPRINTK("ENTER, ata%u\n", ap->id); - assert(qc->flags & ATA_QCFLAG_SG); + WARN_ON(!(qc->flags & ATA_QCFLAG_SG)); /* we must lengthen transfers to end on a 32-bit boundary */ qc->pad_len = lsg->length & 3; @@ -2800,7 +3015,7 @@ static int ata_sg_setup(struct ata_queued_cmd *qc) struct scatterlist *psg = &qc->pad_sgent; unsigned int offset; - assert(qc->dev->class == ATA_DEV_ATAPI); + WARN_ON(qc->dev->class != ATA_DEV_ATAPI); memset(pad_buf, 0, ATA_DMA_PAD_SZ); @@ -2876,7 +3091,7 @@ void ata_poll_qc_complete(struct ata_queued_cmd *qc) } /** - * ata_pio_poll - + * ata_pio_poll - poll using PIO, depending on current state * @ap: the target ata_port * * LOCKING: @@ -2894,7 +3109,7 @@ static unsigned long ata_pio_poll(struct ata_port *ap) unsigned int reg_state = HSM_ST_UNKNOWN; qc = ata_qc_from_tag(ap, ap->active_tag); - assert(qc != NULL); + WARN_ON(qc == NULL); switch (ap->hsm_task_state) { case HSM_ST: @@ -2915,7 +3130,7 @@ static unsigned long ata_pio_poll(struct ata_port *ap) status = ata_chk_status(ap); if (status & ATA_BUSY) { if (time_after(jiffies, ap->pio_task_timeout)) { - qc->err_mask |= AC_ERR_ATA_BUS; + qc->err_mask |= AC_ERR_TIMEOUT; ap->hsm_task_state = HSM_ST_TMOUT; return 0; } @@ -2962,7 +3177,7 @@ static int ata_pio_complete (struct ata_port *ap) } qc = ata_qc_from_tag(ap, ap->active_tag); - assert(qc != NULL); + WARN_ON(qc == NULL); drv_stat = ata_wait_idle(ap); if (!ata_ok(drv_stat)) { @@ -2973,7 +3188,7 @@ static int ata_pio_complete (struct ata_port *ap) ap->hsm_task_state = HSM_ST_IDLE; - assert(qc->err_mask == 0); + WARN_ON(qc->err_mask); ata_poll_qc_complete(qc); /* another command may start at this point */ @@ -2983,7 +3198,7 @@ static int ata_pio_complete (struct ata_port *ap) /** - * swap_buf_le16 - swap halves of 16-words in place + * swap_buf_le16 - swap halves of 16-bit words in place * @buf: Buffer to swap * @buf_words: Number of 16-bit words in buffer. * @@ -3293,7 +3508,7 @@ static void atapi_pio_bytes(struct ata_queued_cmd *qc) err_out: printk(KERN_INFO "ata%u: dev %u: ATAPI check failed\n", ap->id, dev->devno); - qc->err_mask |= AC_ERR_ATA_BUS; + qc->err_mask |= AC_ERR_HSM; ap->hsm_task_state = HSM_ST_ERR; } @@ -3330,7 +3545,7 @@ static void ata_pio_block(struct ata_port *ap) } qc = ata_qc_from_tag(ap, ap->active_tag); - assert(qc != NULL); + WARN_ON(qc == NULL); /* check error */ if (status & (ATA_ERR | ATA_DF)) { @@ -3351,7 +3566,7 @@ static void ata_pio_block(struct ata_port *ap) } else { /* handle BSY=0, DRQ=0 as error */ if ((status & ATA_DRQ) == 0) { - qc->err_mask |= AC_ERR_ATA_BUS; + qc->err_mask |= AC_ERR_HSM; ap->hsm_task_state = HSM_ST_ERR; return; } @@ -3365,7 +3580,7 @@ static void ata_pio_error(struct ata_port *ap) struct ata_queued_cmd *qc; qc = ata_qc_from_tag(ap, ap->active_tag); - assert(qc != NULL); + WARN_ON(qc == NULL); if (qc->tf.command != ATA_CMD_PACKET) printk(KERN_WARNING "ata%u: PIO error\n", ap->id); @@ -3373,7 +3588,7 @@ static void ata_pio_error(struct ata_port *ap) /* make sure qc->err_mask is available to * know what's wrong and recover */ - assert(qc->err_mask); + WARN_ON(qc->err_mask == 0); ap->hsm_task_state = HSM_ST_IDLE; @@ -3414,12 +3629,84 @@ fsm_start: } if (timeout) - queue_delayed_work(ata_wq, &ap->pio_task, timeout); + ata_port_queue_task(ap, ata_pio_task, ap, timeout); else if (!qc_completed) goto fsm_start; } /** + * atapi_packet_task - Write CDB bytes to hardware + * @_data: Port to which ATAPI device is attached. + * + * When device has indicated its readiness to accept + * a CDB, this function is called. Send the CDB. + * If DMA is to be performed, exit immediately. + * Otherwise, we are in polling mode, so poll + * status under operation succeeds or fails. + * + * LOCKING: + * Kernel thread context (may sleep) + */ + +static void atapi_packet_task(void *_data) +{ + struct ata_port *ap = _data; + struct ata_queued_cmd *qc; + u8 status; + + qc = ata_qc_from_tag(ap, ap->active_tag); + WARN_ON(qc == NULL); + WARN_ON(!(qc->flags & ATA_QCFLAG_ACTIVE)); + + /* sleep-wait for BSY to clear */ + DPRINTK("busy wait\n"); + if (ata_busy_sleep(ap, ATA_TMOUT_CDB_QUICK, ATA_TMOUT_CDB)) { + qc->err_mask |= AC_ERR_TIMEOUT; + goto err_out; + } + + /* make sure DRQ is set */ + status = ata_chk_status(ap); + if ((status & (ATA_BUSY | ATA_DRQ)) != ATA_DRQ) { + qc->err_mask |= AC_ERR_HSM; + goto err_out; + } + + /* send SCSI cdb */ + DPRINTK("send cdb\n"); + WARN_ON(qc->dev->cdb_len < 12); + + if (qc->tf.protocol == ATA_PROT_ATAPI_DMA || + qc->tf.protocol == ATA_PROT_ATAPI_NODATA) { + unsigned long flags; + + /* Once we're done issuing command and kicking bmdma, + * irq handler takes over. To not lose irq, we need + * to clear NOINTR flag before sending cdb, but + * interrupt handler shouldn't be invoked before we're + * finished. Hence, the following locking. + */ + spin_lock_irqsave(&ap->host_set->lock, flags); + ap->flags &= ~ATA_FLAG_NOINTR; + ata_data_xfer(ap, qc->cdb, qc->dev->cdb_len, 1); + if (qc->tf.protocol == ATA_PROT_ATAPI_DMA) + ap->ops->bmdma_start(qc); /* initiate bmdma */ + spin_unlock_irqrestore(&ap->host_set->lock, flags); + } else { + ata_data_xfer(ap, qc->cdb, qc->dev->cdb_len, 1); + + /* PIO commands are handled by polling */ + ap->hsm_task_state = HSM_ST; + ata_port_queue_task(ap, ata_pio_task, ap, 0); + } + + return; + +err_out: + ata_poll_qc_complete(qc); +} + +/** * ata_qc_timeout - Handle timeout of queued command * @qc: Command that timed out * @@ -3447,15 +3734,9 @@ static void ata_qc_timeout(struct ata_queued_cmd *qc) DPRINTK("ENTER\n"); - spin_lock_irqsave(&host_set->lock, flags); + ap->hsm_task_state = HSM_ST_IDLE; - /* hack alert! We cannot use the supplied completion - * function from inside the ->eh_strategy_handler() thread. - * libata is the only user of ->eh_strategy_handler() in - * any kernel, so the default scsi_done() assumes it is - * not being called from the SCSI EH. - */ - qc->scsidone = scsi_finish_command; + spin_lock_irqsave(&host_set->lock, flags); switch (qc->tf.protocol) { @@ -3480,12 +3761,13 @@ static void ata_qc_timeout(struct ata_queued_cmd *qc) /* complete taskfile transaction */ qc->err_mask |= ac_err_mask(drv_stat); - ata_qc_complete(qc); break; } spin_unlock_irqrestore(&host_set->lock, flags); + ata_eh_qc_complete(qc); + DPRINTK("EXIT\n"); } @@ -3510,20 +3792,10 @@ static void ata_qc_timeout(struct ata_queued_cmd *qc) void ata_eng_timeout(struct ata_port *ap) { - struct ata_queued_cmd *qc; - DPRINTK("ENTER\n"); - qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc) - ata_qc_timeout(qc); - else { - printk(KERN_ERR "ata%u: BUG: timeout without command\n", - ap->id); - goto out; - } + ata_qc_timeout(ata_qc_from_tag(ap, ap->active_tag)); -out: DPRINTK("EXIT\n"); } @@ -3579,21 +3851,6 @@ struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap, return qc; } -static void __ata_qc_complete(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - unsigned int tag; - - qc->flags = 0; - tag = qc->tag; - if (likely(ata_tag_valid(tag))) { - if (tag == ap->active_tag) - ap->active_tag = ATA_TAG_POISON; - qc->tag = ATA_TAG_POISON; - clear_bit(tag, &ap->qactive); - } -} - /** * ata_qc_free - free unused ata_queued_cmd * @qc: Command to complete @@ -3606,29 +3863,25 @@ static void __ata_qc_complete(struct ata_queued_cmd *qc) */ void ata_qc_free(struct ata_queued_cmd *qc) { - assert(qc != NULL); /* ata_qc_from_tag _might_ return NULL */ + struct ata_port *ap = qc->ap; + unsigned int tag; - __ata_qc_complete(qc); -} + WARN_ON(qc == NULL); /* ata_qc_from_tag _might_ return NULL */ -/** - * ata_qc_complete - Complete an active ATA command - * @qc: Command to complete - * @err_mask: ATA Status register contents - * - * Indicate to the mid and upper layers that an ATA - * command has completed, with either an ok or not-ok status. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ + qc->flags = 0; + tag = qc->tag; + if (likely(ata_tag_valid(tag))) { + if (tag == ap->active_tag) + ap->active_tag = ATA_TAG_POISON; + qc->tag = ATA_TAG_POISON; + clear_bit(tag, &ap->qactive); + } +} -void ata_qc_complete(struct ata_queued_cmd *qc) +void __ata_qc_complete(struct ata_queued_cmd *qc) { - int rc; - - assert(qc != NULL); /* ata_qc_from_tag _might_ return NULL */ - assert(qc->flags & ATA_QCFLAG_ACTIVE); + WARN_ON(qc == NULL); /* ata_qc_from_tag _might_ return NULL */ + WARN_ON(!(qc->flags & ATA_QCFLAG_ACTIVE)); if (likely(qc->flags & ATA_QCFLAG_DMAMAP)) ata_sg_clean(qc); @@ -3640,17 +3893,7 @@ void ata_qc_complete(struct ata_queued_cmd *qc) qc->flags &= ~ATA_QCFLAG_ACTIVE; /* call completion callback */ - rc = qc->complete_fn(qc); - - /* if callback indicates not to complete command (non-zero), - * return immediately - */ - if (rc != 0) - return; - - __ata_qc_complete(qc); - - VPRINTK("EXIT\n"); + qc->complete_fn(qc); } static inline int ata_should_dma_map(struct ata_queued_cmd *qc) @@ -3690,20 +3933,20 @@ static inline int ata_should_dma_map(struct ata_queued_cmd *qc) * spin_lock_irqsave(host_set lock) * * RETURNS: - * Zero on success, negative on error. + * Zero on success, AC_ERR_* mask on failure */ -int ata_qc_issue(struct ata_queued_cmd *qc) +unsigned int ata_qc_issue(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; if (ata_should_dma_map(qc)) { if (qc->flags & ATA_QCFLAG_SG) { if (ata_sg_setup(qc)) - goto err_out; + goto sg_err; } else if (qc->flags & ATA_QCFLAG_SINGLE) { if (ata_sg_setup_one(qc)) - goto err_out; + goto sg_err; } } else { qc->flags &= ~ATA_QCFLAG_DMAMAP; @@ -3716,8 +3959,9 @@ int ata_qc_issue(struct ata_queued_cmd *qc) return ap->ops->qc_issue(qc); -err_out: - return -1; +sg_err: + qc->flags &= ~ATA_QCFLAG_DMAMAP; + return AC_ERR_SYSTEM; } @@ -3736,10 +3980,10 @@ err_out: * spin_lock_irqsave(host_set lock) * * RETURNS: - * Zero on success, negative on error. + * Zero on success, AC_ERR_* mask on failure */ -int ata_qc_issue_prot(struct ata_queued_cmd *qc) +unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; @@ -3760,31 +4004,31 @@ int ata_qc_issue_prot(struct ata_queued_cmd *qc) ata_qc_set_polling(qc); ata_tf_to_host(ap, &qc->tf); ap->hsm_task_state = HSM_ST; - queue_work(ata_wq, &ap->pio_task); + ata_port_queue_task(ap, ata_pio_task, ap, 0); break; case ATA_PROT_ATAPI: ata_qc_set_polling(qc); ata_tf_to_host(ap, &qc->tf); - queue_work(ata_wq, &ap->packet_task); + ata_port_queue_task(ap, atapi_packet_task, ap, 0); break; case ATA_PROT_ATAPI_NODATA: ap->flags |= ATA_FLAG_NOINTR; ata_tf_to_host(ap, &qc->tf); - queue_work(ata_wq, &ap->packet_task); + ata_port_queue_task(ap, atapi_packet_task, ap, 0); break; case ATA_PROT_ATAPI_DMA: ap->flags |= ATA_FLAG_NOINTR; ap->ops->tf_load(ap, &qc->tf); /* load tf registers */ ap->ops->bmdma_setup(qc); /* set up bmdma */ - queue_work(ata_wq, &ap->packet_task); + ata_port_queue_task(ap, atapi_packet_task, ap, 0); break; default: WARN_ON(1); - return -1; + return AC_ERR_SYSTEM; } return 0; @@ -4147,91 +4391,6 @@ irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs) return IRQ_RETVAL(handled); } -/** - * atapi_packet_task - Write CDB bytes to hardware - * @_data: Port to which ATAPI device is attached. - * - * When device has indicated its readiness to accept - * a CDB, this function is called. Send the CDB. - * If DMA is to be performed, exit immediately. - * Otherwise, we are in polling mode, so poll - * status under operation succeeds or fails. - * - * LOCKING: - * Kernel thread context (may sleep) - */ - -static void atapi_packet_task(void *_data) -{ - struct ata_port *ap = _data; - struct ata_queued_cmd *qc; - u8 status; - - qc = ata_qc_from_tag(ap, ap->active_tag); - assert(qc != NULL); - assert(qc->flags & ATA_QCFLAG_ACTIVE); - - /* sleep-wait for BSY to clear */ - DPRINTK("busy wait\n"); - if (ata_busy_sleep(ap, ATA_TMOUT_CDB_QUICK, ATA_TMOUT_CDB)) { - qc->err_mask |= AC_ERR_ATA_BUS; - goto err_out; - } - - /* make sure DRQ is set */ - status = ata_chk_status(ap); - if ((status & (ATA_BUSY | ATA_DRQ)) != ATA_DRQ) { - qc->err_mask |= AC_ERR_ATA_BUS; - goto err_out; - } - - /* send SCSI cdb */ - DPRINTK("send cdb\n"); - assert(ap->cdb_len >= 12); - - if (qc->tf.protocol == ATA_PROT_ATAPI_DMA || - qc->tf.protocol == ATA_PROT_ATAPI_NODATA) { - unsigned long flags; - - /* Once we're done issuing command and kicking bmdma, - * irq handler takes over. To not lose irq, we need - * to clear NOINTR flag before sending cdb, but - * interrupt handler shouldn't be invoked before we're - * finished. Hence, the following locking. - */ - spin_lock_irqsave(&ap->host_set->lock, flags); - ap->flags &= ~ATA_FLAG_NOINTR; - ata_data_xfer(ap, qc->cdb, ap->cdb_len, 1); - if (qc->tf.protocol == ATA_PROT_ATAPI_DMA) - ap->ops->bmdma_start(qc); /* initiate bmdma */ - spin_unlock_irqrestore(&ap->host_set->lock, flags); - } else { - ata_data_xfer(ap, qc->cdb, ap->cdb_len, 1); - - /* PIO commands are handled by polling */ - ap->hsm_task_state = HSM_ST; - queue_work(ata_wq, &ap->pio_task); - } - - return; - -err_out: - ata_poll_qc_complete(qc); -} - - -/** - * ata_port_start - Set port up for dma. - * @ap: Port to initialize - * - * Called just after data structures for each port are - * initialized. Allocates space for PRD table. - * - * May be used as the port_start() entry in ata_port_operations. - * - * LOCKING: - * Inherited from caller. - */ /* * Execute a 'simple' command, that only consists of the opcode 'cmd' itself, @@ -4284,6 +4443,8 @@ static int ata_start_drive(struct ata_port *ap, struct ata_device *dev) /** * ata_device_resume - wakeup a previously suspended devices + * @ap: port the device is connected to + * @dev: the device to resume * * Kick the drive back into action, by sending it an idle immediate * command and making sure its transfer mode matches between drive @@ -4306,10 +4467,11 @@ int ata_device_resume(struct ata_port *ap, struct ata_device *dev) /** * ata_device_suspend - prepare a device for suspend + * @ap: port the device is connected to + * @dev: the device to suspend * * Flush the cache on the drive, if appropriate, then issue a * standbynow command. - * */ int ata_device_suspend(struct ata_port *ap, struct ata_device *dev) { @@ -4323,6 +4485,19 @@ int ata_device_suspend(struct ata_port *ap, struct ata_device *dev) return 0; } +/** + * ata_port_start - Set port up for dma. + * @ap: Port to initialize + * + * Called just after data structures for each port are + * initialized. Allocates space for PRD table. + * + * May be used as the port_start() entry in ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ + int ata_port_start (struct ata_port *ap) { struct device *dev = ap->host_set->dev; @@ -4436,8 +4611,8 @@ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host, ap->active_tag = ATA_TAG_POISON; ap->last_ctl = 0xFF; - INIT_WORK(&ap->packet_task, atapi_packet_task, ap); - INIT_WORK(&ap->pio_task, ata_pio_task, ap); + INIT_WORK(&ap->port_task, NULL, NULL); + INIT_LIST_HEAD(&ap->eh_done_q); for (i = 0; i < ATA_MAX_DEVICES; i++) ap->device[i].devno = i; @@ -4579,9 +4754,9 @@ int ata_device_add(const struct ata_probe_ent *ent) ap = host_set->ports[i]; - DPRINTK("ata%u: probe begin\n", ap->id); + DPRINTK("ata%u: bus probe begin\n", ap->id); rc = ata_bus_probe(ap); - DPRINTK("ata%u: probe end\n", ap->id); + DPRINTK("ata%u: bus probe end\n", ap->id); if (rc) { /* FIXME: do something useful here? @@ -4605,7 +4780,7 @@ int ata_device_add(const struct ata_probe_ent *ent) } /* probes are done, now scan each port's disk(s) */ - DPRINTK("probe begin\n"); + DPRINTK("host probe begin\n"); for (i = 0; i < count; i++) { struct ata_port *ap = host_set->ports[i]; @@ -4691,11 +4866,14 @@ void ata_host_set_remove(struct ata_host_set *host_set) int ata_scsi_release(struct Scsi_Host *host) { struct ata_port *ap = (struct ata_port *) &host->hostdata[0]; + int i; DPRINTK("ENTER\n"); ap->ops->port_disable(ap); ata_host_remove(ap, 0); + for (i = 0; i < ATA_MAX_DEVICES; i++) + kfree(ap->device[i].id); DPRINTK("EXIT\n"); return 1; @@ -4727,32 +4905,6 @@ void ata_std_ports(struct ata_ioports *ioaddr) ioaddr->command_addr = ioaddr->cmd_addr + ATA_REG_CMD; } -static struct ata_probe_ent * -ata_probe_ent_alloc(struct device *dev, const struct ata_port_info *port) -{ - struct ata_probe_ent *probe_ent; - - probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL); - if (!probe_ent) { - printk(KERN_ERR DRV_NAME "(%s): out of memory\n", - kobject_name(&(dev->kobj))); - return NULL; - } - - INIT_LIST_HEAD(&probe_ent->node); - probe_ent->dev = dev; - - probe_ent->sht = port->sht; - probe_ent->host_flags = port->host_flags; - probe_ent->pio_mask = port->pio_mask; - probe_ent->mwdma_mask = port->mwdma_mask; - probe_ent->udma_mask = port->udma_mask; - probe_ent->port_ops = port->port_ops; - - return probe_ent; -} - - #ifdef CONFIG_PCI @@ -4764,256 +4916,6 @@ void ata_pci_host_stop (struct ata_host_set *host_set) } /** - * ata_pci_init_native_mode - Initialize native-mode driver - * @pdev: pci device to be initialized - * @port: array[2] of pointers to port info structures. - * @ports: bitmap of ports present - * - * Utility function which allocates and initializes an - * ata_probe_ent structure for a standard dual-port - * PIO-based IDE controller. The returned ata_probe_ent - * structure can be passed to ata_device_add(). The returned - * ata_probe_ent structure should then be freed with kfree(). - * - * The caller need only pass the address of the primary port, the - * secondary will be deduced automatically. If the device has non - * standard secondary port mappings this function can be called twice, - * once for each interface. - */ - -struct ata_probe_ent * -ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int ports) -{ - struct ata_probe_ent *probe_ent = - ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]); - int p = 0; - - if (!probe_ent) - return NULL; - - probe_ent->irq = pdev->irq; - probe_ent->irq_flags = SA_SHIRQ; - probe_ent->private_data = port[0]->private_data; - - if (ports & ATA_PORT_PRIMARY) { - probe_ent->port[p].cmd_addr = pci_resource_start(pdev, 0); - probe_ent->port[p].altstatus_addr = - probe_ent->port[p].ctl_addr = - pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS; - probe_ent->port[p].bmdma_addr = pci_resource_start(pdev, 4); - ata_std_ports(&probe_ent->port[p]); - p++; - } - - if (ports & ATA_PORT_SECONDARY) { - probe_ent->port[p].cmd_addr = pci_resource_start(pdev, 2); - probe_ent->port[p].altstatus_addr = - probe_ent->port[p].ctl_addr = - pci_resource_start(pdev, 3) | ATA_PCI_CTL_OFS; - probe_ent->port[p].bmdma_addr = pci_resource_start(pdev, 4) + 8; - ata_std_ports(&probe_ent->port[p]); - p++; - } - - probe_ent->n_ports = p; - return probe_ent; -} - -static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev, struct ata_port_info *port, int port_num) -{ - struct ata_probe_ent *probe_ent; - - probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port); - if (!probe_ent) - return NULL; - - probe_ent->legacy_mode = 1; - probe_ent->n_ports = 1; - probe_ent->hard_port_no = port_num; - probe_ent->private_data = port->private_data; - - switch(port_num) - { - case 0: - probe_ent->irq = 14; - probe_ent->port[0].cmd_addr = 0x1f0; - probe_ent->port[0].altstatus_addr = - probe_ent->port[0].ctl_addr = 0x3f6; - break; - case 1: - probe_ent->irq = 15; - probe_ent->port[0].cmd_addr = 0x170; - probe_ent->port[0].altstatus_addr = - probe_ent->port[0].ctl_addr = 0x376; - break; - } - probe_ent->port[0].bmdma_addr = pci_resource_start(pdev, 4) + 8 * port_num; - ata_std_ports(&probe_ent->port[0]); - return probe_ent; -} - -/** - * ata_pci_init_one - Initialize/register PCI IDE host controller - * @pdev: Controller to be initialized - * @port_info: Information from low-level host driver - * @n_ports: Number of ports attached to host controller - * - * This is a helper function which can be called from a driver's - * xxx_init_one() probe function if the hardware uses traditional - * IDE taskfile registers. - * - * This function calls pci_enable_device(), reserves its register - * regions, sets the dma mask, enables bus master mode, and calls - * ata_device_add() - * - * LOCKING: - * Inherited from PCI layer (may sleep). - * - * RETURNS: - * Zero on success, negative on errno-based value on error. - */ - -int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, - unsigned int n_ports) -{ - struct ata_probe_ent *probe_ent = NULL, *probe_ent2 = NULL; - struct ata_port_info *port[2]; - u8 tmp8, mask; - unsigned int legacy_mode = 0; - int disable_dev_on_err = 1; - int rc; - - DPRINTK("ENTER\n"); - - port[0] = port_info[0]; - if (n_ports > 1) - port[1] = port_info[1]; - else - port[1] = port[0]; - - if ((port[0]->host_flags & ATA_FLAG_NO_LEGACY) == 0 - && (pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) { - /* TODO: What if one channel is in native mode ... */ - pci_read_config_byte(pdev, PCI_CLASS_PROG, &tmp8); - mask = (1 << 2) | (1 << 0); - if ((tmp8 & mask) != mask) - legacy_mode = (1 << 3); - } - - /* FIXME... */ - if ((!legacy_mode) && (n_ports > 2)) { - printk(KERN_ERR "ata: BUG: native mode, n_ports > 2\n"); - n_ports = 2; - /* For now */ - } - - /* FIXME: Really for ATA it isn't safe because the device may be - multi-purpose and we want to leave it alone if it was already - enabled. Secondly for shared use as Arjan says we want refcounting - - Checking dev->is_enabled is insufficient as this is not set at - boot for the primary video which is BIOS enabled - */ - - rc = pci_enable_device(pdev); - if (rc) - return rc; - - rc = pci_request_regions(pdev, DRV_NAME); - if (rc) { - disable_dev_on_err = 0; - goto err_out; - } - - /* FIXME: Should use platform specific mappers for legacy port ranges */ - if (legacy_mode) { - if (!request_region(0x1f0, 8, "libata")) { - struct resource *conflict, res; - res.start = 0x1f0; - res.end = 0x1f0 + 8 - 1; - conflict = ____request_resource(&ioport_resource, &res); - if (!strcmp(conflict->name, "libata")) - legacy_mode |= (1 << 0); - else { - disable_dev_on_err = 0; - printk(KERN_WARNING "ata: 0x1f0 IDE port busy\n"); - } - } else - legacy_mode |= (1 << 0); - - if (!request_region(0x170, 8, "libata")) { - struct resource *conflict, res; - res.start = 0x170; - res.end = 0x170 + 8 - 1; - conflict = ____request_resource(&ioport_resource, &res); - if (!strcmp(conflict->name, "libata")) - legacy_mode |= (1 << 1); - else { - disable_dev_on_err = 0; - printk(KERN_WARNING "ata: 0x170 IDE port busy\n"); - } - } else - legacy_mode |= (1 << 1); - } - - /* we have legacy mode, but all ports are unavailable */ - if (legacy_mode == (1 << 3)) { - rc = -EBUSY; - goto err_out_regions; - } - - rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); - if (rc) - goto err_out_regions; - rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); - if (rc) - goto err_out_regions; - - if (legacy_mode) { - if (legacy_mode & (1 << 0)) - probe_ent = ata_pci_init_legacy_port(pdev, port[0], 0); - if (legacy_mode & (1 << 1)) - probe_ent2 = ata_pci_init_legacy_port(pdev, port[1], 1); - } else { - if (n_ports == 2) - probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); - else - probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY); - } - if (!probe_ent && !probe_ent2) { - rc = -ENOMEM; - goto err_out_regions; - } - - pci_set_master(pdev); - - /* FIXME: check ata_device_add return */ - if (legacy_mode) { - if (legacy_mode & (1 << 0)) - ata_device_add(probe_ent); - if (legacy_mode & (1 << 1)) - ata_device_add(probe_ent2); - } else - ata_device_add(probe_ent); - - kfree(probe_ent); - kfree(probe_ent2); - - return 0; - -err_out_regions: - if (legacy_mode & (1 << 0)) - release_region(0x1f0, 8); - if (legacy_mode & (1 << 1)) - release_region(0x170, 8); - pci_release_regions(pdev); -err_out: - if (disable_dev_on_err) - pci_disable_device(pdev); - return rc; -} - -/** * ata_pci_remove_one - PCI layer callback for device removal * @pdev: PCI device that was removed * @@ -5143,7 +5045,7 @@ EXPORT_SYMBOL_GPL(ata_device_add); EXPORT_SYMBOL_GPL(ata_host_set_remove); EXPORT_SYMBOL_GPL(ata_sg_init); EXPORT_SYMBOL_GPL(ata_sg_init_one); -EXPORT_SYMBOL_GPL(ata_qc_complete); +EXPORT_SYMBOL_GPL(__ata_qc_complete); EXPORT_SYMBOL_GPL(ata_qc_issue_prot); EXPORT_SYMBOL_GPL(ata_eng_timeout); EXPORT_SYMBOL_GPL(ata_tf_load); @@ -5169,18 +5071,30 @@ EXPORT_SYMBOL_GPL(ata_port_probe); EXPORT_SYMBOL_GPL(sata_phy_reset); EXPORT_SYMBOL_GPL(__sata_phy_reset); EXPORT_SYMBOL_GPL(ata_bus_reset); +EXPORT_SYMBOL_GPL(ata_std_probeinit); +EXPORT_SYMBOL_GPL(ata_std_softreset); +EXPORT_SYMBOL_GPL(sata_std_hardreset); +EXPORT_SYMBOL_GPL(ata_std_postreset); +EXPORT_SYMBOL_GPL(ata_std_probe_reset); +EXPORT_SYMBOL_GPL(ata_drive_probe_reset); +EXPORT_SYMBOL_GPL(ata_dev_revalidate); EXPORT_SYMBOL_GPL(ata_port_disable); EXPORT_SYMBOL_GPL(ata_ratelimit); +EXPORT_SYMBOL_GPL(ata_busy_sleep); +EXPORT_SYMBOL_GPL(ata_port_queue_task); EXPORT_SYMBOL_GPL(ata_scsi_ioctl); EXPORT_SYMBOL_GPL(ata_scsi_queuecmd); +EXPORT_SYMBOL_GPL(ata_scsi_timed_out); EXPORT_SYMBOL_GPL(ata_scsi_error); EXPORT_SYMBOL_GPL(ata_scsi_slave_config); EXPORT_SYMBOL_GPL(ata_scsi_release); EXPORT_SYMBOL_GPL(ata_host_intr); EXPORT_SYMBOL_GPL(ata_dev_classify); -EXPORT_SYMBOL_GPL(ata_dev_id_string); -EXPORT_SYMBOL_GPL(ata_dev_config); +EXPORT_SYMBOL_GPL(ata_id_string); +EXPORT_SYMBOL_GPL(ata_id_c_string); EXPORT_SYMBOL_GPL(ata_scsi_simulate); +EXPORT_SYMBOL_GPL(ata_eh_qc_complete); +EXPORT_SYMBOL_GPL(ata_eh_qc_retry); EXPORT_SYMBOL_GPL(ata_pio_need_iordy); EXPORT_SYMBOL_GPL(ata_timing_compute); diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 59503c9ccac..ccedb453697 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -151,7 +151,7 @@ int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg) struct scsi_sense_hdr sshdr; enum dma_data_direction data_dir; - if (NULL == (void *)arg) + if (arg == NULL) return -EINVAL; if (copy_from_user(args, arg, sizeof(args))) @@ -201,7 +201,7 @@ int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg) /* Need code to retrieve data from check condition? */ if ((argbuf) - && copy_to_user((void *)(arg + sizeof(args)), argbuf, argsize)) + && copy_to_user(arg + sizeof(args), argbuf, argsize)) rc = -EFAULT; error: if (argbuf) @@ -228,7 +228,7 @@ int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg) u8 args[7]; struct scsi_sense_hdr sshdr; - if (NULL == (void *)arg) + if (arg == NULL) return -EINVAL; if (copy_from_user(args, arg, sizeof(args))) @@ -553,7 +553,7 @@ void ata_gen_ata_desc_sense(struct ata_queued_cmd *qc) /* * Read the controller registers. */ - assert(NULL != qc->ap->ops->tf_read); + WARN_ON(qc->ap->ops->tf_read == NULL); qc->ap->ops->tf_read(qc->ap, tf); /* @@ -628,7 +628,7 @@ void ata_gen_fixed_sense(struct ata_queued_cmd *qc) /* * Read the controller registers. */ - assert(NULL != qc->ap->ops->tf_read); + WARN_ON(qc->ap->ops->tf_read == NULL); qc->ap->ops->tf_read(qc->ap, tf); /* @@ -684,23 +684,23 @@ int ata_scsi_slave_config(struct scsi_device *sdev) if (sdev->id < ATA_MAX_DEVICES) { struct ata_port *ap; struct ata_device *dev; + unsigned int max_sectors; ap = (struct ata_port *) &sdev->host->hostdata[0]; dev = &ap->device[sdev->id]; - /* TODO: 1024 is an arbitrary number, not the + /* TODO: 2048 is an arbitrary number, not the * hardware maximum. This should be increased to * 65534 when Jens Axboe's patch for dynamically * determining max_sectors is merged. */ - if ((dev->flags & ATA_DFLAG_LBA48) && - ((dev->flags & ATA_DFLAG_LOCK_SECTORS) == 0)) { - /* - * do not overwrite sdev->host->max_sectors, since - * other drives on this host may not support LBA48 - */ - blk_queue_max_sectors(sdev->request_queue, 2048); - } + max_sectors = ATA_MAX_SECTORS; + if (dev->flags & ATA_DFLAG_LBA48) + max_sectors = 2048; + if (dev->max_sectors) + max_sectors = dev->max_sectors; + + blk_queue_max_sectors(sdev->request_queue, max_sectors); /* * SATA DMA transfers must be multiples of 4 byte, so @@ -717,6 +717,47 @@ int ata_scsi_slave_config(struct scsi_device *sdev) } /** + * ata_scsi_timed_out - SCSI layer time out callback + * @cmd: timed out SCSI command + * + * Handles SCSI layer timeout. We race with normal completion of + * the qc for @cmd. If the qc is already gone, we lose and let + * the scsi command finish (EH_HANDLED). Otherwise, the qc has + * timed out and EH should be invoked. Prevent ata_qc_complete() + * from finishing it by setting EH_SCHEDULED and return + * EH_NOT_HANDLED. + * + * LOCKING: + * Called from timer context + * + * RETURNS: + * EH_HANDLED or EH_NOT_HANDLED + */ +enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd) +{ + struct Scsi_Host *host = cmd->device->host; + struct ata_port *ap = (struct ata_port *) &host->hostdata[0]; + unsigned long flags; + struct ata_queued_cmd *qc; + enum scsi_eh_timer_return ret = EH_HANDLED; + + DPRINTK("ENTER\n"); + + spin_lock_irqsave(&ap->host_set->lock, flags); + qc = ata_qc_from_tag(ap, ap->active_tag); + if (qc) { + WARN_ON(qc->scsicmd != cmd); + qc->flags |= ATA_QCFLAG_EH_SCHEDULED; + qc->err_mask |= AC_ERR_TIMEOUT; + ret = EH_NOT_HANDLED; + } + spin_unlock_irqrestore(&ap->host_set->lock, flags); + + DPRINTK("EXIT, ret=%d\n", ret); + return ret; +} + +/** * ata_scsi_error - SCSI layer error handler callback * @host: SCSI host on which error occurred * @@ -732,23 +773,84 @@ int ata_scsi_slave_config(struct scsi_device *sdev) int ata_scsi_error(struct Scsi_Host *host) { struct ata_port *ap; + unsigned long flags; DPRINTK("ENTER\n"); ap = (struct ata_port *) &host->hostdata[0]; + + spin_lock_irqsave(&ap->host_set->lock, flags); + WARN_ON(ap->flags & ATA_FLAG_IN_EH); + ap->flags |= ATA_FLAG_IN_EH; + WARN_ON(ata_qc_from_tag(ap, ap->active_tag) == NULL); + spin_unlock_irqrestore(&ap->host_set->lock, flags); + + ata_port_flush_task(ap); + ap->ops->eng_timeout(ap); - /* TODO: this is per-command; when queueing is supported - * this code will either change or move to a more - * appropriate place - */ - host->host_failed--; - INIT_LIST_HEAD(&host->eh_cmd_q); + WARN_ON(host->host_failed || !list_empty(&host->eh_cmd_q)); + + scsi_eh_flush_done_q(&ap->eh_done_q); + + spin_lock_irqsave(&ap->host_set->lock, flags); + ap->flags &= ~ATA_FLAG_IN_EH; + spin_unlock_irqrestore(&ap->host_set->lock, flags); DPRINTK("EXIT\n"); return 0; } +static void ata_eh_scsidone(struct scsi_cmnd *scmd) +{ + /* nada */ +} + +static void __ata_eh_qc_complete(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct scsi_cmnd *scmd = qc->scsicmd; + unsigned long flags; + + spin_lock_irqsave(&ap->host_set->lock, flags); + qc->scsidone = ata_eh_scsidone; + __ata_qc_complete(qc); + WARN_ON(ata_tag_valid(qc->tag)); + spin_unlock_irqrestore(&ap->host_set->lock, flags); + + scsi_eh_finish_cmd(scmd, &ap->eh_done_q); +} + +/** + * ata_eh_qc_complete - Complete an active ATA command from EH + * @qc: Command to complete + * + * Indicate to the mid and upper layers that an ATA command has + * completed. To be used from EH. + */ +void ata_eh_qc_complete(struct ata_queued_cmd *qc) +{ + struct scsi_cmnd *scmd = qc->scsicmd; + scmd->retries = scmd->allowed; + __ata_eh_qc_complete(qc); +} + +/** + * ata_eh_qc_retry - Tell midlayer to retry an ATA command after EH + * @qc: Command to retry + * + * Indicate to the mid and upper layers that an ATA command + * should be retried. To be used from EH. + * + * SCSI midlayer limits the number of retries to scmd->allowed. + * This function might need to adjust scmd->retries for commands + * which get retried due to unrelated NCQ failures. + */ +void ata_eh_qc_retry(struct ata_queued_cmd *qc) +{ + __ata_eh_qc_complete(qc); +} + /** * ata_scsi_start_stop_xlat - Translate SCSI START STOP UNIT command * @qc: Storage for translated ATA taskfile @@ -985,9 +1087,13 @@ static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, const u8 *sc if (dev->flags & ATA_DFLAG_LBA) { tf->flags |= ATA_TFLAG_LBA; - if (dev->flags & ATA_DFLAG_LBA48) { - if (n_block > (64 * 1024)) - goto invalid_fld; + if (lba_28_ok(block, n_block)) { + /* use LBA28 */ + tf->command = ATA_CMD_VERIFY; + tf->device |= (block >> 24) & 0xf; + } else if (lba_48_ok(block, n_block)) { + if (!(dev->flags & ATA_DFLAG_LBA48)) + goto out_of_range; /* use LBA48 */ tf->flags |= ATA_TFLAG_LBA48; @@ -998,15 +1104,9 @@ static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, const u8 *sc tf->hob_lbah = (block >> 40) & 0xff; tf->hob_lbam = (block >> 32) & 0xff; tf->hob_lbal = (block >> 24) & 0xff; - } else { - if (n_block > 256) - goto invalid_fld; - - /* use LBA28 */ - tf->command = ATA_CMD_VERIFY; - - tf->device |= (block >> 24) & 0xf; - } + } else + /* request too large even for LBA48 */ + goto out_of_range; tf->nsect = n_block & 0xff; @@ -1019,8 +1119,8 @@ static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, const u8 *sc /* CHS */ u32 sect, head, cyl, track; - if (n_block > 256) - goto invalid_fld; + if (!lba_28_ok(block, n_block)) + goto out_of_range; /* Convert LBA to CHS */ track = (u32)block / dev->sectors; @@ -1139,9 +1239,11 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, const u8 *scsicm if (dev->flags & ATA_DFLAG_LBA) { tf->flags |= ATA_TFLAG_LBA; - if (dev->flags & ATA_DFLAG_LBA48) { - /* The request -may- be too large for LBA48. */ - if ((block >> 48) || (n_block > 65536)) + if (lba_28_ok(block, n_block)) { + /* use LBA28 */ + tf->device |= (block >> 24) & 0xf; + } else if (lba_48_ok(block, n_block)) { + if (!(dev->flags & ATA_DFLAG_LBA48)) goto out_of_range; /* use LBA48 */ @@ -1152,15 +1254,9 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, const u8 *scsicm tf->hob_lbah = (block >> 40) & 0xff; tf->hob_lbam = (block >> 32) & 0xff; tf->hob_lbal = (block >> 24) & 0xff; - } else { - /* use LBA28 */ - - /* The request -may- be too large for LBA28. */ - if ((block >> 28) || (n_block > 256)) - goto out_of_range; - - tf->device |= (block >> 24) & 0xf; - } + } else + /* request too large even for LBA48 */ + goto out_of_range; if (unlikely(ata_rwcmd_protocol(qc) < 0)) goto invalid_fld; @@ -1178,7 +1274,7 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, const u8 *scsicm u32 sect, head, cyl, track; /* The request -may- be too large for CHS addressing. */ - if ((block >> 28) || (n_block > 256)) + if (!lba_28_ok(block, n_block)) goto out_of_range; if (unlikely(ata_rwcmd_protocol(qc) < 0)) @@ -1225,7 +1321,7 @@ nothing_to_do: return 1; } -static int ata_scsi_qc_complete(struct ata_queued_cmd *qc) +static void ata_scsi_qc_complete(struct ata_queued_cmd *qc) { struct scsi_cmnd *cmd = qc->scsicmd; u8 *cdb = cmd->cmnd; @@ -1262,7 +1358,7 @@ static int ata_scsi_qc_complete(struct ata_queued_cmd *qc) qc->scsidone(cmd); - return 0; + ata_qc_free(qc); } /** @@ -1328,8 +1424,9 @@ static void ata_scsi_translate(struct ata_port *ap, struct ata_device *dev, goto early_finish; /* select device, send command to hardware */ - if (ata_qc_issue(qc)) - goto err_did; + qc->err_mask = ata_qc_issue(qc); + if (qc->err_mask) + ata_qc_complete(qc); VPRINTK("EXIT\n"); return; @@ -1472,8 +1569,8 @@ unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf, if (buflen > 35) { memcpy(&rbuf[8], "ATA ", 8); - ata_dev_id_string(args->id, &rbuf[16], ATA_ID_PROD_OFS, 16); - ata_dev_id_string(args->id, &rbuf[32], ATA_ID_FW_REV_OFS, 4); + ata_id_string(args->id, &rbuf[16], ATA_ID_PROD_OFS, 16); + ata_id_string(args->id, &rbuf[32], ATA_ID_FW_REV_OFS, 4); if (rbuf[32] == 0 || rbuf[32] == ' ') memcpy(&rbuf[32], "n/a ", 4); } @@ -1547,8 +1644,8 @@ unsigned int ata_scsiop_inq_80(struct ata_scsi_args *args, u8 *rbuf, memcpy(rbuf, hdr, sizeof(hdr)); if (buflen > (ATA_SERNO_LEN + 4 - 1)) - ata_dev_id_string(args->id, (unsigned char *) &rbuf[4], - ATA_ID_SERNO_OFS, ATA_SERNO_LEN); + ata_id_string(args->id, (unsigned char *) &rbuf[4], + ATA_ID_SERNO_OFS, ATA_SERNO_LEN); return 0; } @@ -1713,15 +1810,12 @@ static int ata_dev_supports_fua(u16 *id) if (!ata_id_has_fua(id)) return 0; - model[40] = '\0'; - fw[8] = '\0'; - - ata_dev_id_string(id, model, ATA_ID_PROD_OFS, sizeof(model) - 1); - ata_dev_id_string(id, fw, ATA_ID_FW_REV_OFS, sizeof(fw) - 1); + ata_id_c_string(id, model, ATA_ID_PROD_OFS, sizeof(model)); + ata_id_c_string(id, fw, ATA_ID_FW_REV_OFS, sizeof(fw)); - if (strncmp(model, "Maxtor", 6)) + if (strcmp(model, "Maxtor")) return 1; - if (strncmp(fw, "BANC1G10", 8)) + if (strcmp(fw, "BANC1G10")) return 1; return 0; /* blacklisted */ @@ -2015,7 +2109,7 @@ void ata_scsi_badcmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), u8 done(cmd); } -static int atapi_sense_complete(struct ata_queued_cmd *qc) +static void atapi_sense_complete(struct ata_queued_cmd *qc) { if (qc->err_mask && ((qc->err_mask & AC_ERR_DEV) == 0)) /* FIXME: not quite right; we don't want the @@ -2026,7 +2120,7 @@ static int atapi_sense_complete(struct ata_queued_cmd *qc) ata_gen_ata_desc_sense(qc); qc->scsidone(qc->scsicmd); - return 0; + ata_qc_free(qc); } /* is it pointless to prefer PIO for "safety reasons"? */ @@ -2056,7 +2150,7 @@ static void atapi_request_sense(struct ata_queued_cmd *qc) ata_sg_init_one(qc, cmd->sense_buffer, sizeof(cmd->sense_buffer)); qc->dma_dir = DMA_FROM_DEVICE; - memset(&qc->cdb, 0, ap->cdb_len); + memset(&qc->cdb, 0, qc->dev->cdb_len); qc->cdb[0] = REQUEST_SENSE; qc->cdb[4] = SCSI_SENSE_BUFFERSIZE; @@ -2075,15 +2169,14 @@ static void atapi_request_sense(struct ata_queued_cmd *qc) qc->complete_fn = atapi_sense_complete; - if (ata_qc_issue(qc)) { - qc->err_mask |= AC_ERR_OTHER; + qc->err_mask = ata_qc_issue(qc); + if (qc->err_mask) ata_qc_complete(qc); - } DPRINTK("EXIT\n"); } -static int atapi_qc_complete(struct ata_queued_cmd *qc) +static void atapi_qc_complete(struct ata_queued_cmd *qc) { struct scsi_cmnd *cmd = qc->scsicmd; unsigned int err_mask = qc->err_mask; @@ -2093,7 +2186,7 @@ static int atapi_qc_complete(struct ata_queued_cmd *qc) if (unlikely(err_mask & AC_ERR_DEV)) { cmd->result = SAM_STAT_CHECK_CONDITION; atapi_request_sense(qc); - return 1; + return; } else if (unlikely(err_mask)) @@ -2133,7 +2226,7 @@ static int atapi_qc_complete(struct ata_queued_cmd *qc) } qc->scsidone(cmd); - return 0; + ata_qc_free(qc); } /** * atapi_xlat - Initialize PACKET taskfile @@ -2159,7 +2252,7 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd) if (ata_check_atapi_dma(qc)) using_pio = 1; - memcpy(&qc->cdb, scsicmd, qc->ap->cdb_len); + memcpy(&qc->cdb, scsicmd, dev->cdb_len); qc->complete_fn = atapi_qc_complete; @@ -2519,7 +2612,8 @@ out_unlock: /** * ata_scsi_simulate - simulate SCSI command on ATA device - * @id: current IDENTIFY data for target device. + * @ap: port the device is connected to + * @dev: the target device * @cmd: SCSI command being sent to device. * @done: SCSI command completion function. * diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index fddaf479a54..f4c48c91b63 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -45,8 +45,9 @@ extern int libata_fua; extern struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap, struct ata_device *dev); extern int ata_rwcmd_protocol(struct ata_queued_cmd *qc); +extern void ata_port_flush_task(struct ata_port *ap); extern void ata_qc_free(struct ata_queued_cmd *qc); -extern int ata_qc_issue(struct ata_queued_cmd *qc); +extern unsigned int ata_qc_issue(struct ata_queued_cmd *qc); extern int ata_check_atapi_dma(struct ata_queued_cmd *qc); extern void ata_dev_select(struct ata_port *ap, unsigned int device, unsigned int wait, unsigned int can_sleep); diff --git a/drivers/scsi/pcmcia/Kconfig b/drivers/scsi/pcmcia/Kconfig index df52190f4d9..eac8e179cff 100644 --- a/drivers/scsi/pcmcia/Kconfig +++ b/drivers/scsi/pcmcia/Kconfig @@ -8,6 +8,7 @@ menu "PCMCIA SCSI adapter support" config PCMCIA_AHA152X tristate "Adaptec AHA152X PCMCIA support" depends on m && !64BIT + select SCSI_SPI_ATTRS help Say Y here if you intend to attach this type of PCMCIA SCSI host adapter to your computer. diff --git a/drivers/scsi/pdc_adma.c b/drivers/scsi/pdc_adma.c index e8df0c9ec1e..5f33cc932e7 100644 --- a/drivers/scsi/pdc_adma.c +++ b/drivers/scsi/pdc_adma.c @@ -131,7 +131,7 @@ static void adma_host_stop(struct ata_host_set *host_set); static void adma_port_stop(struct ata_port *ap); static void adma_phy_reset(struct ata_port *ap); static void adma_qc_prep(struct ata_queued_cmd *qc); -static int adma_qc_issue(struct ata_queued_cmd *qc); +static unsigned int adma_qc_issue(struct ata_queued_cmd *qc); static int adma_check_atapi_dma(struct ata_queued_cmd *qc); static void adma_bmdma_stop(struct ata_queued_cmd *qc); static u8 adma_bmdma_status(struct ata_port *ap); @@ -143,11 +143,11 @@ static struct scsi_host_template adma_ata_sht = { .name = DRV_NAME, .ioctl = ata_scsi_ioctl, .queuecommand = ata_scsi_queuecmd, + .eh_timed_out = ata_scsi_timed_out, .eh_strategy_handler = ata_scsi_error, .can_queue = ATA_DEF_QUEUE, .this_id = ATA_SHT_THIS_ID, .sg_tablesize = LIBATA_MAX_PRD, - .max_sectors = ATA_MAX_SECTORS, .cmd_per_lun = ATA_SHT_CMD_PER_LUN, .emulated = ATA_SHT_EMULATED, .use_clustering = ENABLE_CLUSTERING, @@ -419,7 +419,7 @@ static inline void adma_packet_start(struct ata_queued_cmd *qc) writew(aPIOMD4 | aGO, chan + ADMA_CONTROL); } -static int adma_qc_issue(struct ata_queued_cmd *qc) +static unsigned int adma_qc_issue(struct ata_queued_cmd *qc) { struct adma_port_priv *pp = qc->ap->private_data; diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index 2770005324b..e561281967d 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -37,7 +37,7 @@ #include <asm/io.h> #define DRV_NAME "sata_mv" -#define DRV_VERSION "0.5" +#define DRV_VERSION "0.6" enum { /* BAR's are enumerated in terms of pci_resource_start() terms */ @@ -228,7 +228,9 @@ enum { MV_HP_ERRATA_50XXB2 = (1 << 2), MV_HP_ERRATA_60X1B2 = (1 << 3), MV_HP_ERRATA_60X1C0 = (1 << 4), - MV_HP_50XX = (1 << 5), + MV_HP_ERRATA_XX42A0 = (1 << 5), + MV_HP_50XX = (1 << 6), + MV_HP_GEN_IIE = (1 << 7), /* Port private flags (pp_flags) */ MV_PP_FLAG_EDMA_EN = (1 << 0), @@ -237,6 +239,9 @@ enum { #define IS_50XX(hpriv) ((hpriv)->hp_flags & MV_HP_50XX) #define IS_60XX(hpriv) (((hpriv)->hp_flags & MV_HP_50XX) == 0) +#define IS_GEN_I(hpriv) IS_50XX(hpriv) +#define IS_GEN_II(hpriv) IS_60XX(hpriv) +#define IS_GEN_IIE(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_IIE) enum { /* Our DMA boundary is determined by an ePRD being unable to handle @@ -255,6 +260,8 @@ enum chip_type { chip_5080, chip_604x, chip_608x, + chip_6042, + chip_7042, }; /* Command ReQuest Block: 32B */ @@ -265,6 +272,14 @@ struct mv_crqb { u16 ata_cmd[11]; }; +struct mv_crqb_iie { + u32 addr; + u32 addr_hi; + u32 flags; + u32 len; + u32 ata_cmd[4]; +}; + /* Command ResPonse Block: 8B */ struct mv_crpb { u16 id; @@ -328,7 +343,8 @@ static void mv_host_stop(struct ata_host_set *host_set); static int mv_port_start(struct ata_port *ap); static void mv_port_stop(struct ata_port *ap); static void mv_qc_prep(struct ata_queued_cmd *qc); -static int mv_qc_issue(struct ata_queued_cmd *qc); +static void mv_qc_prep_iie(struct ata_queued_cmd *qc); +static unsigned int mv_qc_issue(struct ata_queued_cmd *qc); static irqreturn_t mv_interrupt(int irq, void *dev_instance, struct pt_regs *regs); static void mv_eng_timeout(struct ata_port *ap); @@ -362,11 +378,11 @@ static struct scsi_host_template mv_sht = { .name = DRV_NAME, .ioctl = ata_scsi_ioctl, .queuecommand = ata_scsi_queuecmd, + .eh_timed_out = ata_scsi_timed_out, .eh_strategy_handler = ata_scsi_error, .can_queue = MV_USE_Q_DEPTH, .this_id = ATA_SHT_THIS_ID, .sg_tablesize = MV_MAX_SG_CT / 2, - .max_sectors = ATA_MAX_SECTORS, .cmd_per_lun = ATA_SHT_CMD_PER_LUN, .emulated = ATA_SHT_EMULATED, .use_clustering = ATA_SHT_USE_CLUSTERING, @@ -430,6 +446,33 @@ static const struct ata_port_operations mv6_ops = { .host_stop = mv_host_stop, }; +static const struct ata_port_operations mv_iie_ops = { + .port_disable = ata_port_disable, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .phy_reset = mv_phy_reset, + + .qc_prep = mv_qc_prep_iie, + .qc_issue = mv_qc_issue, + + .eng_timeout = mv_eng_timeout, + + .irq_handler = mv_interrupt, + .irq_clear = mv_irq_clear, + + .scr_read = mv_scr_read, + .scr_write = mv_scr_write, + + .port_start = mv_port_start, + .port_stop = mv_port_stop, + .host_stop = mv_host_stop, +}; + static const struct ata_port_info mv_port_info[] = { { /* chip_504x */ .sht = &mv_sht, @@ -467,6 +510,21 @@ static const struct ata_port_info mv_port_info[] = { .udma_mask = 0x7f, /* udma0-6 */ .port_ops = &mv6_ops, }, + { /* chip_6042 */ + .sht = &mv_sht, + .host_flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS), + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = 0x7f, /* udma0-6 */ + .port_ops = &mv_iie_ops, + }, + { /* chip_7042 */ + .sht = &mv_sht, + .host_flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS | + MV_FLAG_DUAL_HC), + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = 0x7f, /* udma0-6 */ + .port_ops = &mv_iie_ops, + }, }; static const struct pci_device_id mv_pci_tbl[] = { @@ -477,6 +535,7 @@ static const struct pci_device_id mv_pci_tbl[] = { {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6040), 0, 0, chip_604x}, {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6041), 0, 0, chip_604x}, + {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6042), 0, 0, chip_6042}, {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6080), 0, 0, chip_608x}, {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6081), 0, 0, chip_608x}, @@ -572,8 +631,8 @@ static void mv_irq_clear(struct ata_port *ap) * @base: port base address * @pp: port private data * - * Verify the local cache of the eDMA state is accurate with an - * assert. + * Verify the local cache of the eDMA state is accurate with a + * WARN_ON. * * LOCKING: * Inherited from caller. @@ -584,15 +643,15 @@ static void mv_start_dma(void __iomem *base, struct mv_port_priv *pp) writelfl(EDMA_EN, base + EDMA_CMD_OFS); pp->pp_flags |= MV_PP_FLAG_EDMA_EN; } - assert(EDMA_EN & readl(base + EDMA_CMD_OFS)); + WARN_ON(!(EDMA_EN & readl(base + EDMA_CMD_OFS))); } /** * mv_stop_dma - Disable eDMA engine * @ap: ATA channel to manipulate * - * Verify the local cache of the eDMA state is accurate with an - * assert. + * Verify the local cache of the eDMA state is accurate with a + * WARN_ON. * * LOCKING: * Inherited from caller. @@ -610,7 +669,7 @@ static void mv_stop_dma(struct ata_port *ap) writelfl(EDMA_DS, port_mmio + EDMA_CMD_OFS); pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN; } else { - assert(!(EDMA_EN & readl(port_mmio + EDMA_CMD_OFS))); + WARN_ON(EDMA_EN & readl(port_mmio + EDMA_CMD_OFS)); } /* now properly wait for the eDMA to stop */ @@ -773,6 +832,33 @@ static inline void mv_priv_free(struct mv_port_priv *pp, struct device *dev) dma_free_coherent(dev, MV_PORT_PRIV_DMA_SZ, pp->crpb, pp->crpb_dma); } +static void mv_edma_cfg(struct mv_host_priv *hpriv, void __iomem *port_mmio) +{ + u32 cfg = readl(port_mmio + EDMA_CFG_OFS); + + /* set up non-NCQ EDMA configuration */ + cfg &= ~0x1f; /* clear queue depth */ + cfg &= ~EDMA_CFG_NCQ; /* clear NCQ mode */ + cfg &= ~(1 << 9); /* disable equeue */ + + if (IS_GEN_I(hpriv)) + cfg |= (1 << 8); /* enab config burst size mask */ + + else if (IS_GEN_II(hpriv)) + cfg |= EDMA_CFG_RD_BRST_EXT | EDMA_CFG_WR_BUFF_LEN; + + else if (IS_GEN_IIE(hpriv)) { + cfg |= (1 << 23); /* dis RX PM port mask */ + cfg &= ~(1 << 16); /* dis FIS-based switching (for now) */ + cfg &= ~(1 << 19); /* dis 128-entry queue (for now?) */ + cfg |= (1 << 18); /* enab early completion */ + cfg |= (1 << 17); /* enab host q cache */ + cfg |= (1 << 22); /* enab cutthrough */ + } + + writelfl(cfg, port_mmio + EDMA_CFG_OFS); +} + /** * mv_port_start - Port specific init/start routine. * @ap: ATA channel to manipulate @@ -786,6 +872,7 @@ static inline void mv_priv_free(struct mv_port_priv *pp, struct device *dev) static int mv_port_start(struct ata_port *ap) { struct device *dev = ap->host_set->dev; + struct mv_host_priv *hpriv = ap->host_set->private_data; struct mv_port_priv *pp; void __iomem *port_mmio = mv_ap_base(ap); void *mem; @@ -829,17 +916,26 @@ static int mv_port_start(struct ata_port *ap) pp->sg_tbl = mem; pp->sg_tbl_dma = mem_dma; - writelfl(EDMA_CFG_Q_DEPTH | EDMA_CFG_RD_BRST_EXT | - EDMA_CFG_WR_BUFF_LEN, port_mmio + EDMA_CFG_OFS); + mv_edma_cfg(hpriv, port_mmio); writel((pp->crqb_dma >> 16) >> 16, port_mmio + EDMA_REQ_Q_BASE_HI_OFS); writelfl(pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK, port_mmio + EDMA_REQ_Q_IN_PTR_OFS); - writelfl(0, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS); - writelfl(0, port_mmio + EDMA_RSP_Q_IN_PTR_OFS); + if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0) + writelfl(pp->crqb_dma & 0xffffffff, + port_mmio + EDMA_REQ_Q_OUT_PTR_OFS); + else + writelfl(0, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS); writel((pp->crpb_dma >> 16) >> 16, port_mmio + EDMA_RSP_Q_BASE_HI_OFS); + + if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0) + writelfl(pp->crpb_dma & 0xffffffff, + port_mmio + EDMA_RSP_Q_IN_PTR_OFS); + else + writelfl(0, port_mmio + EDMA_RSP_Q_IN_PTR_OFS); + writelfl(pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK, port_mmio + EDMA_RSP_Q_OUT_PTR_OFS); @@ -960,21 +1056,19 @@ static void mv_qc_prep(struct ata_queued_cmd *qc) struct ata_taskfile *tf; u16 flags = 0; - if (ATA_PROT_DMA != qc->tf.protocol) { + if (ATA_PROT_DMA != qc->tf.protocol) return; - } /* the req producer index should be the same as we remember it */ - assert(((readl(mv_ap_base(qc->ap) + EDMA_REQ_Q_IN_PTR_OFS) >> - EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) == - pp->req_producer); + WARN_ON(((readl(mv_ap_base(qc->ap) + EDMA_REQ_Q_IN_PTR_OFS) >> + EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) != + pp->req_producer); /* Fill in command request block */ - if (!(qc->tf.flags & ATA_TFLAG_WRITE)) { + if (!(qc->tf.flags & ATA_TFLAG_WRITE)) flags |= CRQB_FLAG_READ; - } - assert(MV_MAX_Q_DEPTH > qc->tag); + WARN_ON(MV_MAX_Q_DEPTH <= qc->tag); flags |= qc->tag << CRQB_TAG_SHIFT; pp->crqb[pp->req_producer].sg_addr = @@ -1029,9 +1123,76 @@ static void mv_qc_prep(struct ata_queued_cmd *qc) mv_crqb_pack_cmd(cw++, tf->device, ATA_REG_DEVICE, 0); mv_crqb_pack_cmd(cw++, tf->command, ATA_REG_CMD, 1); /* last */ - if (!(qc->flags & ATA_QCFLAG_DMAMAP)) { + if (!(qc->flags & ATA_QCFLAG_DMAMAP)) + return; + mv_fill_sg(qc); +} + +/** + * mv_qc_prep_iie - Host specific command preparation. + * @qc: queued command to prepare + * + * This routine simply redirects to the general purpose routine + * if command is not DMA. Else, it handles prep of the CRQB + * (command request block), does some sanity checking, and calls + * the SG load routine. + * + * LOCKING: + * Inherited from caller. + */ +static void mv_qc_prep_iie(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct mv_port_priv *pp = ap->private_data; + struct mv_crqb_iie *crqb; + struct ata_taskfile *tf; + u32 flags = 0; + + if (ATA_PROT_DMA != qc->tf.protocol) + return; + + /* the req producer index should be the same as we remember it */ + WARN_ON(((readl(mv_ap_base(qc->ap) + EDMA_REQ_Q_IN_PTR_OFS) >> + EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) != + pp->req_producer); + + /* Fill in Gen IIE command request block + */ + if (!(qc->tf.flags & ATA_TFLAG_WRITE)) + flags |= CRQB_FLAG_READ; + + WARN_ON(MV_MAX_Q_DEPTH <= qc->tag); + flags |= qc->tag << CRQB_TAG_SHIFT; + + crqb = (struct mv_crqb_iie *) &pp->crqb[pp->req_producer]; + crqb->addr = cpu_to_le32(pp->sg_tbl_dma & 0xffffffff); + crqb->addr_hi = cpu_to_le32((pp->sg_tbl_dma >> 16) >> 16); + crqb->flags = cpu_to_le32(flags); + + tf = &qc->tf; + crqb->ata_cmd[0] = cpu_to_le32( + (tf->command << 16) | + (tf->feature << 24) + ); + crqb->ata_cmd[1] = cpu_to_le32( + (tf->lbal << 0) | + (tf->lbam << 8) | + (tf->lbah << 16) | + (tf->device << 24) + ); + crqb->ata_cmd[2] = cpu_to_le32( + (tf->hob_lbal << 0) | + (tf->hob_lbam << 8) | + (tf->hob_lbah << 16) | + (tf->hob_feature << 24) + ); + crqb->ata_cmd[3] = cpu_to_le32( + (tf->nsect << 0) | + (tf->hob_nsect << 8) + ); + + if (!(qc->flags & ATA_QCFLAG_DMAMAP)) return; - } mv_fill_sg(qc); } @@ -1047,7 +1208,7 @@ static void mv_qc_prep(struct ata_queued_cmd *qc) * LOCKING: * Inherited from caller. */ -static int mv_qc_issue(struct ata_queued_cmd *qc) +static unsigned int mv_qc_issue(struct ata_queued_cmd *qc) { void __iomem *port_mmio = mv_ap_base(qc->ap); struct mv_port_priv *pp = qc->ap->private_data; @@ -1065,12 +1226,12 @@ static int mv_qc_issue(struct ata_queued_cmd *qc) in_ptr = readl(port_mmio + EDMA_REQ_Q_IN_PTR_OFS); /* the req producer index should be the same as we remember it */ - assert(((in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) == - pp->req_producer); + WARN_ON(((in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) != + pp->req_producer); /* until we do queuing, the queue should be empty at this point */ - assert(((in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) == - ((readl(port_mmio + EDMA_REQ_Q_OUT_PTR_OFS) >> - EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK)); + WARN_ON(((in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) != + ((readl(port_mmio + EDMA_REQ_Q_OUT_PTR_OFS) >> + EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK)); mv_inc_q_index(&pp->req_producer); /* now incr producer index */ @@ -1090,7 +1251,7 @@ static int mv_qc_issue(struct ata_queued_cmd *qc) * * This routine is for use when the port is in DMA mode, when it * will be using the CRPB (command response block) method of - * returning command completion information. We assert indices + * returning command completion information. We check indices * are good, grab status, and bump the response consumer index to * prove that we're up to date. * @@ -1106,16 +1267,16 @@ static u8 mv_get_crpb_status(struct ata_port *ap) out_ptr = readl(port_mmio + EDMA_RSP_Q_OUT_PTR_OFS); /* the response consumer index should be the same as we remember it */ - assert(((out_ptr >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) == - pp->rsp_consumer); + WARN_ON(((out_ptr >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) != + pp->rsp_consumer); /* increment our consumer index... */ pp->rsp_consumer = mv_inc_q_index(&pp->rsp_consumer); /* and, until we do NCQ, there should only be 1 CRPB waiting */ - assert(((readl(port_mmio + EDMA_RSP_Q_IN_PTR_OFS) >> - EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) == - pp->rsp_consumer); + WARN_ON(((readl(port_mmio + EDMA_RSP_Q_IN_PTR_OFS) >> + EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) != + pp->rsp_consumer); /* write out our inc'd consumer index so EDMA knows we're caught up */ out_ptr &= EDMA_RSP_Q_BASE_LO_MASK; @@ -1192,7 +1353,6 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, u32 hc_irq_cause; int shift, port, port0, hard_port, handled; unsigned int err_mask; - u8 ata_status = 0; if (hc == 0) { port0 = 0; @@ -1210,6 +1370,7 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, hc,relevant,hc_irq_cause); for (port = port0; port < port0 + MV_PORTS_PER_HC; port++) { + u8 ata_status = 0; ap = host_set->ports[port]; hard_port = port & MV_PORT_MASK; /* range 0-3 */ handled = 0; /* ensure ata_status is set if handled++ */ @@ -1681,6 +1842,12 @@ static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, m2 |= hpriv->signal[port].pre; m2 &= ~(1 << 16); + /* according to mvSata 3.6.1, some IIE values are fixed */ + if (IS_GEN_IIE(hpriv)) { + m2 &= ~0xC30FF01F; + m2 |= 0x0000900F; + } + writel(m2, port_mmio + PHY_MODE2); } @@ -1846,7 +2013,6 @@ static void mv_phy_reset(struct ata_port *ap) static void mv_eng_timeout(struct ata_port *ap) { struct ata_queued_cmd *qc; - unsigned long flags; printk(KERN_ERR "ata%u: Entering mv_eng_timeout\n",ap->id); DPRINTK("All regs @ start of eng_timeout\n"); @@ -1861,22 +2027,8 @@ static void mv_eng_timeout(struct ata_port *ap) mv_err_intr(ap); mv_stop_and_reset(ap); - if (!qc) { - printk(KERN_ERR "ata%u: BUG: timeout without command\n", - ap->id); - } else { - /* hack alert! We cannot use the supplied completion - * function from inside the ->eh_strategy_handler() thread. - * libata is the only user of ->eh_strategy_handler() in - * any kernel, so the default scsi_done() assumes it is - * not being called from the SCSI EH. - */ - spin_lock_irqsave(&ap->host_set->lock, flags); - qc->scsidone = scsi_finish_command; - qc->err_mask |= AC_ERR_OTHER; - ata_qc_complete(qc); - spin_unlock_irqrestore(&ap->host_set->lock, flags); - } + qc->err_mask |= AC_ERR_TIMEOUT; + ata_eh_qc_complete(qc); } /** @@ -1995,6 +2147,27 @@ static int mv_chip_id(struct pci_dev *pdev, struct mv_host_priv *hpriv, } break; + case chip_7042: + case chip_6042: + hpriv->ops = &mv6xxx_ops; + + hp_flags |= MV_HP_GEN_IIE; + + switch (rev_id) { + case 0x0: + hp_flags |= MV_HP_ERRATA_XX42A0; + break; + case 0x1: + hp_flags |= MV_HP_ERRATA_60X1C0; + break; + default: + dev_printk(KERN_WARNING, &pdev->dev, + "Applying 60X1C0 workarounds to unknown rev\n"); + hp_flags |= MV_HP_ERRATA_60X1C0; + break; + } + break; + default: printk(KERN_ERR DRV_NAME ": BUG: invalid board index %u\n", board_idx); return 1; diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c index bbbb55eeb73..caffadc2e0a 100644 --- a/drivers/scsi/sata_nv.c +++ b/drivers/scsi/sata_nv.c @@ -229,11 +229,11 @@ static struct scsi_host_template nv_sht = { .name = DRV_NAME, .ioctl = ata_scsi_ioctl, .queuecommand = ata_scsi_queuecmd, + .eh_timed_out = ata_scsi_timed_out, .eh_strategy_handler = ata_scsi_error, .can_queue = ATA_DEF_QUEUE, .this_id = ATA_SHT_THIS_ID, .sg_tablesize = LIBATA_MAX_PRD, - .max_sectors = ATA_MAX_SECTORS, .cmd_per_lun = ATA_SHT_CMD_PER_LUN, .emulated = ATA_SHT_EMULATED, .use_clustering = ATA_SHT_USE_CLUSTERING, diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c index b0b0a69b356..84cb3940ad8 100644 --- a/drivers/scsi/sata_promise.c +++ b/drivers/scsi/sata_promise.c @@ -46,7 +46,7 @@ #include "sata_promise.h" #define DRV_NAME "sata_promise" -#define DRV_VERSION "1.03" +#define DRV_VERSION "1.04" enum { @@ -58,6 +58,7 @@ enum { PDC_GLOBAL_CTL = 0x48, /* Global control/status (per port) */ PDC_CTLSTAT = 0x60, /* IDE control and status (per port) */ PDC_SATA_PLUG_CSR = 0x6C, /* SATA Plug control/status reg */ + PDC2_SATA_PLUG_CSR = 0x60, /* SATAII Plug control/status reg */ PDC_SLEW_CTL = 0x470, /* slew rate control reg */ PDC_ERR_MASK = (1<<19) | (1<<20) | (1<<21) | (1<<22) | @@ -67,8 +68,10 @@ enum { board_20319 = 1, /* FastTrak S150 TX4 */ board_20619 = 2, /* FastTrak TX4000 */ board_20771 = 3, /* FastTrak TX2300 */ + board_2057x = 4, /* SATAII150 Tx2plus */ + board_40518 = 5, /* SATAII150 Tx4 */ - PDC_HAS_PATA = (1 << 1), /* PDC20375 has PATA */ + PDC_HAS_PATA = (1 << 1), /* PDC20375/20575 has PATA */ PDC_RESET = (1 << 11), /* HDMA reset */ @@ -82,6 +85,10 @@ struct pdc_port_priv { dma_addr_t pkt_dma; }; +struct pdc_host_priv { + int hotplug_offset; +}; + static u32 pdc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg); static void pdc_sata_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); @@ -95,7 +102,8 @@ static void pdc_qc_prep(struct ata_queued_cmd *qc); static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf); static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf); static void pdc_irq_clear(struct ata_port *ap); -static int pdc_qc_issue_prot(struct ata_queued_cmd *qc); +static unsigned int pdc_qc_issue_prot(struct ata_queued_cmd *qc); +static void pdc_host_stop(struct ata_host_set *host_set); static struct scsi_host_template pdc_ata_sht = { @@ -103,11 +111,11 @@ static struct scsi_host_template pdc_ata_sht = { .name = DRV_NAME, .ioctl = ata_scsi_ioctl, .queuecommand = ata_scsi_queuecmd, + .eh_timed_out = ata_scsi_timed_out, .eh_strategy_handler = ata_scsi_error, .can_queue = ATA_DEF_QUEUE, .this_id = ATA_SHT_THIS_ID, .sg_tablesize = LIBATA_MAX_PRD, - .max_sectors = ATA_MAX_SECTORS, .cmd_per_lun = ATA_SHT_CMD_PER_LUN, .emulated = ATA_SHT_EMULATED, .use_clustering = ATA_SHT_USE_CLUSTERING, @@ -137,7 +145,7 @@ static const struct ata_port_operations pdc_sata_ops = { .scr_write = pdc_sata_scr_write, .port_start = pdc_port_start, .port_stop = pdc_port_stop, - .host_stop = ata_pci_host_stop, + .host_stop = pdc_host_stop, }; static const struct ata_port_operations pdc_pata_ops = { @@ -158,7 +166,7 @@ static const struct ata_port_operations pdc_pata_ops = { .port_start = pdc_port_start, .port_stop = pdc_port_stop, - .host_stop = ata_pci_host_stop, + .host_stop = pdc_host_stop, }; static const struct ata_port_info pdc_port_info[] = { @@ -201,6 +209,26 @@ static const struct ata_port_info pdc_port_info[] = { .udma_mask = 0x7f, /* udma0-6 ; FIXME */ .port_ops = &pdc_sata_ops, }, + + /* board_2057x */ + { + .sht = &pdc_ata_sht, + .host_flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x7f, /* udma0-6 ; FIXME */ + .port_ops = &pdc_sata_ops, + }, + + /* board_40518 */ + { + .sht = &pdc_ata_sht, + .host_flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x7f, /* udma0-6 ; FIXME */ + .port_ops = &pdc_sata_ops, + }, }; static const struct pci_device_id pdc_ata_pci_tbl[] = { @@ -217,9 +245,9 @@ static const struct pci_device_id pdc_ata_pci_tbl[] = { { PCI_VENDOR_ID_PROMISE, 0x3376, PCI_ANY_ID, PCI_ANY_ID, 0, 0, board_2037x }, { PCI_VENDOR_ID_PROMISE, 0x3574, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_2037x }, + board_2057x }, { PCI_VENDOR_ID_PROMISE, 0x3d75, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_2037x }, + board_2057x }, { PCI_VENDOR_ID_PROMISE, 0x3d73, PCI_ANY_ID, PCI_ANY_ID, 0, 0, board_2037x }, @@ -227,12 +255,14 @@ static const struct pci_device_id pdc_ata_pci_tbl[] = { board_20319 }, { PCI_VENDOR_ID_PROMISE, 0x3319, PCI_ANY_ID, PCI_ANY_ID, 0, 0, board_20319 }, + { PCI_VENDOR_ID_PROMISE, 0x3515, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_20319 }, { PCI_VENDOR_ID_PROMISE, 0x3519, PCI_ANY_ID, PCI_ANY_ID, 0, 0, board_20319 }, { PCI_VENDOR_ID_PROMISE, 0x3d17, PCI_ANY_ID, PCI_ANY_ID, 0, 0, board_20319 }, { PCI_VENDOR_ID_PROMISE, 0x3d18, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_20319 }, + board_40518 }, { PCI_VENDOR_ID_PROMISE, 0x6629, PCI_ANY_ID, PCI_ANY_ID, 0, 0, board_20619 }, @@ -261,12 +291,11 @@ static int pdc_port_start(struct ata_port *ap) if (rc) return rc; - pp = kmalloc(sizeof(*pp), GFP_KERNEL); + pp = kzalloc(sizeof(*pp), GFP_KERNEL); if (!pp) { rc = -ENOMEM; goto err_out; } - memset(pp, 0, sizeof(*pp)); pp->pkt = dma_alloc_coherent(dev, 128, &pp->pkt_dma, GFP_KERNEL); if (!pp->pkt) { @@ -298,6 +327,16 @@ static void pdc_port_stop(struct ata_port *ap) } +static void pdc_host_stop(struct ata_host_set *host_set) +{ + struct pdc_host_priv *hp = host_set->private_data; + + ata_pci_host_stop(host_set); + + kfree(hp); +} + + static void pdc_reset_port(struct ata_port *ap) { void __iomem *mmio = (void __iomem *) ap->ioaddr.cmd_addr + PDC_CTLSTAT; @@ -394,19 +433,6 @@ static void pdc_eng_timeout(struct ata_port *ap) spin_lock_irqsave(&host_set->lock, flags); qc = ata_qc_from_tag(ap, ap->active_tag); - if (!qc) { - printk(KERN_ERR "ata%u: BUG: timeout without command\n", - ap->id); - goto out; - } - - /* hack alert! We cannot use the supplied completion - * function from inside the ->eh_strategy_handler() thread. - * libata is the only user of ->eh_strategy_handler() in - * any kernel, so the default scsi_done() assumes it is - * not being called from the SCSI EH. - */ - qc->scsidone = scsi_finish_command; switch (qc->tf.protocol) { case ATA_PROT_DMA: @@ -414,7 +440,6 @@ static void pdc_eng_timeout(struct ata_port *ap) printk(KERN_ERR "ata%u: command timeout\n", ap->id); drv_stat = ata_wait_idle(ap); qc->err_mask |= __ac_err_mask(drv_stat); - ata_qc_complete(qc); break; default: @@ -424,12 +449,11 @@ static void pdc_eng_timeout(struct ata_port *ap) ap->id, qc->tf.command, drv_stat); qc->err_mask |= ac_err_mask(drv_stat); - ata_qc_complete(qc); break; } -out: spin_unlock_irqrestore(&host_set->lock, flags); + ata_eh_qc_complete(qc); DPRINTK("EXIT\n"); } @@ -495,14 +519,15 @@ static irqreturn_t pdc_interrupt (int irq, void *dev_instance, struct pt_regs *r VPRINTK("QUICK EXIT 2\n"); return IRQ_NONE; } + + spin_lock(&host_set->lock); + mask &= 0xffff; /* only 16 tags possible */ if (!mask) { VPRINTK("QUICK EXIT 3\n"); - return IRQ_NONE; + goto done_irq; } - spin_lock(&host_set->lock); - writel(mask, mmio_base + PDC_INT_SEQMASK); for (i = 0; i < host_set->n_ports; i++) { @@ -519,10 +544,10 @@ static irqreturn_t pdc_interrupt (int irq, void *dev_instance, struct pt_regs *r } } - spin_unlock(&host_set->lock); - VPRINTK("EXIT\n"); +done_irq: + spin_unlock(&host_set->lock); return IRQ_RETVAL(handled); } @@ -544,7 +569,7 @@ static inline void pdc_packet_start(struct ata_queued_cmd *qc) readl((void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); /* flush */ } -static int pdc_qc_issue_prot(struct ata_queued_cmd *qc) +static unsigned int pdc_qc_issue_prot(struct ata_queued_cmd *qc) { switch (qc->tf.protocol) { case ATA_PROT_DMA: @@ -600,6 +625,8 @@ static void pdc_ata_setup_port(struct ata_ioports *port, unsigned long base) static void pdc_host_init(unsigned int chip_id, struct ata_probe_ent *pe) { void __iomem *mmio = pe->mmio_base; + struct pdc_host_priv *hp = pe->private_data; + int hotplug_offset = hp->hotplug_offset; u32 tmp; /* @@ -614,12 +641,12 @@ static void pdc_host_init(unsigned int chip_id, struct ata_probe_ent *pe) writel(tmp, mmio + PDC_FLASH_CTL); /* clear plug/unplug flags for all ports */ - tmp = readl(mmio + PDC_SATA_PLUG_CSR); - writel(tmp | 0xff, mmio + PDC_SATA_PLUG_CSR); + tmp = readl(mmio + hotplug_offset); + writel(tmp | 0xff, mmio + hotplug_offset); /* mask plug/unplug ints */ - tmp = readl(mmio + PDC_SATA_PLUG_CSR); - writel(tmp | 0xff0000, mmio + PDC_SATA_PLUG_CSR); + tmp = readl(mmio + hotplug_offset); + writel(tmp | 0xff0000, mmio + hotplug_offset); /* reduce TBG clock to 133 Mhz. */ tmp = readl(mmio + PDC_TBG_MODE); @@ -641,6 +668,7 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e { static int printed_version; struct ata_probe_ent *probe_ent = NULL; + struct pdc_host_priv *hp; unsigned long base; void __iomem *mmio_base; unsigned int board_idx = (unsigned int) ent->driver_data; @@ -671,13 +699,12 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e if (rc) goto err_out_regions; - probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL); + probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL); if (probe_ent == NULL) { rc = -ENOMEM; goto err_out_regions; } - memset(probe_ent, 0, sizeof(*probe_ent)); probe_ent->dev = pci_dev_to_dev(pdev); INIT_LIST_HEAD(&probe_ent->node); @@ -688,6 +715,16 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e } base = (unsigned long) mmio_base; + hp = kzalloc(sizeof(*hp), GFP_KERNEL); + if (hp == NULL) { + rc = -ENOMEM; + goto err_out_free_ent; + } + + /* Set default hotplug offset */ + hp->hotplug_offset = PDC_SATA_PLUG_CSR; + probe_ent->private_data = hp; + probe_ent->sht = pdc_port_info[board_idx].sht; probe_ent->host_flags = pdc_port_info[board_idx].host_flags; probe_ent->pio_mask = pdc_port_info[board_idx].pio_mask; @@ -707,6 +744,10 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e /* notice 4-port boards */ switch (board_idx) { + case board_40518: + /* Override hotplug offset for SATAII150 */ + hp->hotplug_offset = PDC2_SATA_PLUG_CSR; + /* Fall through */ case board_20319: probe_ent->n_ports = 4; @@ -716,6 +757,10 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e probe_ent->port[2].scr_addr = base + 0x600; probe_ent->port[3].scr_addr = base + 0x700; break; + case board_2057x: + /* Override hotplug offset for SATAII150 */ + hp->hotplug_offset = PDC2_SATA_PLUG_CSR; + /* Fall through */ case board_2037x: probe_ent->n_ports = 2; break; @@ -741,8 +786,10 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e /* initialize adapter */ pdc_host_init(board_idx, probe_ent); - /* FIXME: check ata_device_add return value */ - ata_device_add(probe_ent); + /* FIXME: Need any other frees than hp? */ + if (!ata_device_add(probe_ent)) + kfree(hp); + kfree(probe_ent); return 0; diff --git a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c index 80480f0fb2b..9602f43a298 100644 --- a/drivers/scsi/sata_qstor.c +++ b/drivers/scsi/sata_qstor.c @@ -120,7 +120,7 @@ static void qs_host_stop(struct ata_host_set *host_set); static void qs_port_stop(struct ata_port *ap); static void qs_phy_reset(struct ata_port *ap); static void qs_qc_prep(struct ata_queued_cmd *qc); -static int qs_qc_issue(struct ata_queued_cmd *qc); +static unsigned int qs_qc_issue(struct ata_queued_cmd *qc); static int qs_check_atapi_dma(struct ata_queued_cmd *qc); static void qs_bmdma_stop(struct ata_queued_cmd *qc); static u8 qs_bmdma_status(struct ata_port *ap); @@ -132,11 +132,11 @@ static struct scsi_host_template qs_ata_sht = { .name = DRV_NAME, .ioctl = ata_scsi_ioctl, .queuecommand = ata_scsi_queuecmd, + .eh_timed_out = ata_scsi_timed_out, .eh_strategy_handler = ata_scsi_error, .can_queue = ATA_DEF_QUEUE, .this_id = ATA_SHT_THIS_ID, .sg_tablesize = QS_MAX_PRD, - .max_sectors = ATA_MAX_SECTORS, .cmd_per_lun = ATA_SHT_CMD_PER_LUN, .emulated = ATA_SHT_EMULATED, //FIXME .use_clustering = ATA_SHT_USE_CLUSTERING, @@ -276,8 +276,8 @@ static unsigned int qs_fill_sg(struct ata_queued_cmd *qc) unsigned int nelem; u8 *prd = pp->pkt + QS_CPB_BYTES; - assert(qc->__sg != NULL); - assert(qc->n_elem > 0 || qc->pad_len > 0); + WARN_ON(qc->__sg == NULL); + WARN_ON(qc->n_elem == 0 && qc->pad_len == 0); nelem = 0; ata_for_each_sg(sg, qc) { @@ -352,7 +352,7 @@ static inline void qs_packet_start(struct ata_queued_cmd *qc) readl(chan + QS_CCT_CFF); /* flush */ } -static int qs_qc_issue(struct ata_queued_cmd *qc) +static unsigned int qs_qc_issue(struct ata_queued_cmd *qc) { struct qs_port_priv *pp = qc->ap->private_data; diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c index 9face3c6aa2..4f2a67ed39d 100644 --- a/drivers/scsi/sata_sil.c +++ b/drivers/scsi/sata_sil.c @@ -49,24 +49,30 @@ #define DRV_VERSION "0.9" enum { + /* + * host flags + */ SIL_FLAG_RERR_ON_DMA_ACT = (1 << 29), SIL_FLAG_MOD15WRITE = (1 << 30), + SIL_DFL_HOST_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_MMIO, + /* + * Controller IDs + */ sil_3112 = 0, - sil_3112_m15w = 1, - sil_3512 = 2, - sil_3114 = 3, - - SIL_FIFO_R0 = 0x40, - SIL_FIFO_W0 = 0x41, - SIL_FIFO_R1 = 0x44, - SIL_FIFO_W1 = 0x45, - SIL_FIFO_R2 = 0x240, - SIL_FIFO_W2 = 0x241, - SIL_FIFO_R3 = 0x244, - SIL_FIFO_W3 = 0x245, + sil_3512 = 1, + sil_3114 = 2, + /* + * Register offsets + */ SIL_SYSCFG = 0x48, + + /* + * Register bits + */ + /* SYSCFG */ SIL_MASK_IDE0_INT = (1 << 22), SIL_MASK_IDE1_INT = (1 << 23), SIL_MASK_IDE2_INT = (1 << 24), @@ -75,9 +81,12 @@ enum { SIL_MASK_4PORT = SIL_MASK_2PORT | SIL_MASK_IDE2_INT | SIL_MASK_IDE3_INT, - SIL_IDE2_BMDMA = 0x200, - + /* BMDMA/BMDMA2 */ SIL_INTR_STEERING = (1 << 1), + + /* + * Others + */ SIL_QUIRK_MOD15WRITE = (1 << 0), SIL_QUIRK_UDMA5MAX = (1 << 1), }; @@ -90,13 +99,13 @@ static void sil_post_set_mode (struct ata_port *ap); static const struct pci_device_id sil_pci_tbl[] = { - { 0x1095, 0x3112, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w }, - { 0x1095, 0x0240, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w }, + { 0x1095, 0x3112, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, + { 0x1095, 0x0240, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, { 0x1095, 0x3512, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3512 }, { 0x1095, 0x3114, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3114 }, - { 0x1002, 0x436e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w }, - { 0x1002, 0x4379, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w }, - { 0x1002, 0x437a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w }, + { 0x1002, 0x436e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, + { 0x1002, 0x4379, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, + { 0x1002, 0x437a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, { } /* terminate list */ }; @@ -137,11 +146,11 @@ static struct scsi_host_template sil_sht = { .name = DRV_NAME, .ioctl = ata_scsi_ioctl, .queuecommand = ata_scsi_queuecmd, + .eh_timed_out = ata_scsi_timed_out, .eh_strategy_handler = ata_scsi_error, .can_queue = ATA_DEF_QUEUE, .this_id = ATA_SHT_THIS_ID, .sg_tablesize = LIBATA_MAX_PRD, - .max_sectors = ATA_MAX_SECTORS, .cmd_per_lun = ATA_SHT_CMD_PER_LUN, .emulated = ATA_SHT_EMULATED, .use_clustering = ATA_SHT_USE_CLUSTERING, @@ -159,7 +168,7 @@ static const struct ata_port_operations sil_ops = { .check_status = ata_check_status, .exec_command = ata_exec_command, .dev_select = ata_std_dev_select, - .phy_reset = sata_phy_reset, + .probe_reset = ata_std_probe_reset, .post_set_mode = sil_post_set_mode, .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, @@ -181,19 +190,7 @@ static const struct ata_port_info sil_port_info[] = { /* sil_3112 */ { .sht = &sil_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_SRST | ATA_FLAG_MMIO, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = 0x3f, /* udma0-5 */ - .port_ops = &sil_ops, - }, - /* sil_3112_15w - keep it sync'd w/ sil_3112 */ - { - .sht = &sil_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_SRST | ATA_FLAG_MMIO | - SIL_FLAG_MOD15WRITE, + .host_flags = SIL_DFL_HOST_FLAGS | SIL_FLAG_MOD15WRITE, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x3f, /* udma0-5 */ @@ -202,9 +199,7 @@ static const struct ata_port_info sil_port_info[] = { /* sil_3512 */ { .sht = &sil_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_SRST | ATA_FLAG_MMIO | - SIL_FLAG_RERR_ON_DMA_ACT, + .host_flags = SIL_DFL_HOST_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x3f, /* udma0-5 */ @@ -213,9 +208,7 @@ static const struct ata_port_info sil_port_info[] = { /* sil_3114 */ { .sht = &sil_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_SRST | ATA_FLAG_MMIO | - SIL_FLAG_RERR_ON_DMA_ACT, + .host_flags = SIL_DFL_HOST_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x3f, /* udma0-5 */ @@ -229,16 +222,17 @@ static const struct { unsigned long tf; /* ATA taskfile register block */ unsigned long ctl; /* ATA control/altstatus register block */ unsigned long bmdma; /* DMA register block */ + unsigned long fifo_cfg; /* FIFO Valid Byte Count and Control */ unsigned long scr; /* SATA control register block */ unsigned long sien; /* SATA Interrupt Enable register */ unsigned long xfer_mode;/* data transfer mode register */ unsigned long sfis_cfg; /* SATA FIS reception config register */ } sil_port[] = { /* port 0 ... */ - { 0x80, 0x8A, 0x00, 0x100, 0x148, 0xb4, 0x14c }, - { 0xC0, 0xCA, 0x08, 0x180, 0x1c8, 0xf4, 0x1cc }, - { 0x280, 0x28A, 0x200, 0x300, 0x348, 0x2b4, 0x34c }, - { 0x2C0, 0x2CA, 0x208, 0x380, 0x3c8, 0x2f4, 0x3cc }, + { 0x80, 0x8A, 0x00, 0x40, 0x100, 0x148, 0xb4, 0x14c }, + { 0xC0, 0xCA, 0x08, 0x44, 0x180, 0x1c8, 0xf4, 0x1cc }, + { 0x280, 0x28A, 0x200, 0x240, 0x300, 0x348, 0x2b4, 0x34c }, + { 0x2C0, 0x2CA, 0x208, 0x244, 0x380, 0x3c8, 0x2f4, 0x3cc }, /* ... port 3 */ }; @@ -354,22 +348,12 @@ static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) static void sil_dev_config(struct ata_port *ap, struct ata_device *dev) { unsigned int n, quirks = 0; - unsigned char model_num[40]; - const char *s; - unsigned int len; + unsigned char model_num[41]; - ata_dev_id_string(dev->id, model_num, ATA_ID_PROD_OFS, - sizeof(model_num)); - s = &model_num[0]; - len = strnlen(s, sizeof(model_num)); - - /* ATAPI specifies that empty space is blank-filled; remove blanks */ - while ((len > 0) && (s[len - 1] == ' ')) - len--; + ata_id_c_string(dev->id, model_num, ATA_ID_PROD_OFS, sizeof(model_num)); for (n = 0; sil_blacklist[n].product; n++) - if (!memcmp(sil_blacklist[n].product, s, - strlen(sil_blacklist[n].product))) { + if (!strcmp(sil_blacklist[n].product, model_num)) { quirks = sil_blacklist[n].quirk; break; } @@ -380,16 +364,14 @@ static void sil_dev_config(struct ata_port *ap, struct ata_device *dev) (quirks & SIL_QUIRK_MOD15WRITE))) { printk(KERN_INFO "ata%u(%u): applying Seagate errata fix (mod15write workaround)\n", ap->id, dev->devno); - ap->host->max_sectors = 15; - ap->host->hostt->max_sectors = 15; - dev->flags |= ATA_DFLAG_LOCK_SECTORS; + dev->max_sectors = 15; return; } /* limit to udma5 */ if (quirks & SIL_QUIRK_UDMA5MAX) { printk(KERN_INFO "ata%u(%u): applying Maxtor errata fix %s\n", - ap->id, dev->devno, s); + ap->id, dev->devno, model_num); ap->udma_mask &= ATA_UDMA5; return; } @@ -431,13 +413,12 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) if (rc) goto err_out_regions; - probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL); + probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL); if (probe_ent == NULL) { rc = -ENOMEM; goto err_out_regions; } - memset(probe_ent, 0, sizeof(*probe_ent)); INIT_LIST_HEAD(&probe_ent->node); probe_ent->dev = pci_dev_to_dev(pdev); probe_ent->port_ops = sil_port_info[ent->driver_data].port_ops; @@ -474,19 +455,12 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) if (cls) { cls >>= 3; cls++; /* cls = (line_size/8)+1 */ - writeb(cls, mmio_base + SIL_FIFO_R0); - writeb(cls, mmio_base + SIL_FIFO_W0); - writeb(cls, mmio_base + SIL_FIFO_R1); - writeb(cls, mmio_base + SIL_FIFO_W1); - if (ent->driver_data == sil_3114) { - writeb(cls, mmio_base + SIL_FIFO_R2); - writeb(cls, mmio_base + SIL_FIFO_W2); - writeb(cls, mmio_base + SIL_FIFO_R3); - writeb(cls, mmio_base + SIL_FIFO_W3); - } + for (i = 0; i < probe_ent->n_ports; i++) + writew(cls << 8 | cls, + mmio_base + sil_port[i].fifo_cfg); } else dev_printk(KERN_WARNING, &pdev->dev, - "cache line size not set. Driver may not function\n"); + "cache line size not set. Driver may not function\n"); /* Apply R_ERR on DMA activate FIS errata workaround */ if (probe_ent->host_flags & SIL_FLAG_RERR_ON_DMA_ACT) { @@ -509,10 +483,10 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) irq_mask = SIL_MASK_4PORT; /* flip the magic "make 4 ports work" bit */ - tmp = readl(mmio_base + SIL_IDE2_BMDMA); + tmp = readl(mmio_base + sil_port[2].bmdma); if ((tmp & SIL_INTR_STEERING) == 0) writel(tmp | SIL_INTR_STEERING, - mmio_base + SIL_IDE2_BMDMA); + mmio_base + sil_port[2].bmdma); } else { irq_mask = SIL_MASK_2PORT; diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 923130185a9..9a53a5ed38c 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -249,9 +249,9 @@ static u8 sil24_check_status(struct ata_port *ap); static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg); static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val); static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf); -static void sil24_phy_reset(struct ata_port *ap); +static int sil24_probe_reset(struct ata_port *ap, unsigned int *classes); static void sil24_qc_prep(struct ata_queued_cmd *qc); -static int sil24_qc_issue(struct ata_queued_cmd *qc); +static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc); static void sil24_irq_clear(struct ata_port *ap); static void sil24_eng_timeout(struct ata_port *ap); static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs *regs); @@ -262,6 +262,7 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) static const struct pci_device_id sil24_pci_tbl[] = { { 0x1095, 0x3124, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3124 }, + { 0x8086, 0x3124, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3124 }, { 0x1095, 0x3132, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3132 }, { 0x1095, 0x3131, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3131 }, { 0x1095, 0x3531, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3131 }, @@ -280,11 +281,11 @@ static struct scsi_host_template sil24_sht = { .name = DRV_NAME, .ioctl = ata_scsi_ioctl, .queuecommand = ata_scsi_queuecmd, + .eh_timed_out = ata_scsi_timed_out, .eh_strategy_handler = ata_scsi_error, .can_queue = ATA_DEF_QUEUE, .this_id = ATA_SHT_THIS_ID, .sg_tablesize = LIBATA_MAX_PRD, - .max_sectors = ATA_MAX_SECTORS, .cmd_per_lun = ATA_SHT_CMD_PER_LUN, .emulated = ATA_SHT_EMULATED, .use_clustering = ATA_SHT_USE_CLUSTERING, @@ -305,7 +306,7 @@ static const struct ata_port_operations sil24_ops = { .tf_read = sil24_tf_read, - .phy_reset = sil24_phy_reset, + .probe_reset = sil24_probe_reset, .qc_prep = sil24_qc_prep, .qc_issue = sil24_qc_issue, @@ -335,8 +336,8 @@ static struct ata_port_info sil24_port_info[] = { { .sht = &sil24_sht, .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_SRST | ATA_FLAG_MMIO | - ATA_FLAG_PIO_DMA | SIL24_NPORTS2FLAG(4), + ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | + SIL24_NPORTS2FLAG(4), .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x3f, /* udma0-5 */ @@ -346,8 +347,8 @@ static struct ata_port_info sil24_port_info[] = { { .sht = &sil24_sht, .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_SRST | ATA_FLAG_MMIO | - ATA_FLAG_PIO_DMA | SIL24_NPORTS2FLAG(2), + ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | + SIL24_NPORTS2FLAG(2), .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x3f, /* udma0-5 */ @@ -357,8 +358,8 @@ static struct ata_port_info sil24_port_info[] = { { .sht = &sil24_sht, .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_SRST | ATA_FLAG_MMIO | - ATA_FLAG_PIO_DMA | SIL24_NPORTS2FLAG(1), + ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | + SIL24_NPORTS2FLAG(1), .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x3f, /* udma0-5 */ @@ -370,7 +371,7 @@ static void sil24_dev_config(struct ata_port *ap, struct ata_device *dev) { void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; - if (ap->cdb_len == 16) + if (dev->cdb_len == 16) writel(PORT_CS_CDB16, port + PORT_CTRL_STAT); else writel(PORT_CS_CDB16, port + PORT_CTRL_CLR); @@ -427,14 +428,23 @@ static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf) *tf = pp->tf; } -static int sil24_issue_SRST(struct ata_port *ap) +static int sil24_softreset(struct ata_port *ap, int verbose, + unsigned int *class) { void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; struct sil24_port_priv *pp = ap->private_data; struct sil24_prb *prb = &pp->cmd_block[0].ata.prb; dma_addr_t paddr = pp->cmd_block_dma; + unsigned long timeout = jiffies + ATA_TMOUT_BOOT * HZ; u32 irq_enable, irq_stat; - int cnt; + + DPRINTK("ENTER\n"); + + if (!sata_dev_present(ap)) { + DPRINTK("PHY reports no device\n"); + *class = ATA_DEV_NONE; + goto out; + } /* temporarily turn off IRQs during SRST */ irq_enable = readl(port + PORT_IRQ_ENABLE_SET); @@ -451,7 +461,7 @@ static int sil24_issue_SRST(struct ata_port *ap) writel((u32)paddr, port + PORT_CMD_ACTIVATE); - for (cnt = 0; cnt < 100; cnt++) { + do { irq_stat = readl(port + PORT_IRQ_STAT); writel(irq_stat, port + PORT_IRQ_STAT); /* clear irq */ @@ -459,36 +469,42 @@ static int sil24_issue_SRST(struct ata_port *ap) if (irq_stat & (PORT_IRQ_COMPLETE | PORT_IRQ_ERROR)) break; - msleep(1); - } + msleep(100); + } while (time_before(jiffies, timeout)); /* restore IRQs */ writel(irq_enable, port + PORT_IRQ_ENABLE_SET); - if (!(irq_stat & PORT_IRQ_COMPLETE)) - return -1; + if (!(irq_stat & PORT_IRQ_COMPLETE)) { + DPRINTK("EXIT, srst failed\n"); + return -EIO; + } - /* update TF */ sil24_update_tf(ap); + *class = ata_dev_classify(&pp->tf); + + if (*class == ATA_DEV_UNKNOWN) + *class = ATA_DEV_NONE; + + out: + DPRINTK("EXIT, class=%u\n", *class); return 0; } -static void sil24_phy_reset(struct ata_port *ap) +static int sil24_hardreset(struct ata_port *ap, int verbose, + unsigned int *class) { - struct sil24_port_priv *pp = ap->private_data; + unsigned int dummy_class; - __sata_phy_reset(ap); - if (ap->flags & ATA_FLAG_PORT_DISABLED) - return; - - if (sil24_issue_SRST(ap) < 0) { - printk(KERN_ERR DRV_NAME - " ata%u: SRST failed, disabling port\n", ap->id); - ap->ops->port_disable(ap); - return; - } + /* sil24 doesn't report device signature after hard reset */ + return sata_std_hardreset(ap, verbose, &dummy_class); +} - ap->device->class = ata_dev_classify(&pp->tf); +static int sil24_probe_reset(struct ata_port *ap, unsigned int *classes) +{ + return ata_drive_probe_reset(ap, ata_std_probeinit, + sil24_softreset, sil24_hardreset, + ata_std_postreset, classes); } static inline void sil24_fill_sg(struct ata_queued_cmd *qc, @@ -533,7 +549,7 @@ static void sil24_qc_prep(struct ata_queued_cmd *qc) prb = &cb->atapi.prb; sge = cb->atapi.sge; memset(cb->atapi.cdb, 0, 32); - memcpy(cb->atapi.cdb, qc->cdb, ap->cdb_len); + memcpy(cb->atapi.cdb, qc->cdb, qc->dev->cdb_len); if (qc->tf.protocol != ATA_PROT_ATAPI_NODATA) { if (qc->tf.flags & ATA_TFLAG_WRITE) @@ -557,7 +573,7 @@ static void sil24_qc_prep(struct ata_queued_cmd *qc) sil24_fill_sg(qc, sge); } -static int sil24_qc_issue(struct ata_queued_cmd *qc) +static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; @@ -638,23 +654,10 @@ static void sil24_eng_timeout(struct ata_port *ap) struct ata_queued_cmd *qc; qc = ata_qc_from_tag(ap, ap->active_tag); - if (!qc) { - printk(KERN_ERR "ata%u: BUG: timeout without command\n", - ap->id); - return; - } - /* - * hack alert! We cannot use the supplied completion - * function from inside the ->eh_strategy_handler() thread. - * libata is the only user of ->eh_strategy_handler() in - * any kernel, so the default scsi_done() assumes it is - * not being called from the SCSI EH. - */ printk(KERN_ERR "ata%u: command timeout\n", ap->id); - qc->scsidone = scsi_finish_command; - qc->err_mask |= AC_ERR_OTHER; - ata_qc_complete(qc); + qc->err_mask |= AC_ERR_TIMEOUT; + ata_eh_qc_complete(qc); sil24_reset_controller(ap); } @@ -895,6 +898,7 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) probe_ent->sht = pinfo->sht; probe_ent->host_flags = pinfo->host_flags; probe_ent->pio_mask = pinfo->pio_mask; + probe_ent->mwdma_mask = pinfo->mwdma_mask; probe_ent->udma_mask = pinfo->udma_mask; probe_ent->port_ops = pinfo->port_ops; probe_ent->n_ports = SIL24_FLAG2NPORTS(pinfo->host_flags); diff --git a/drivers/scsi/sata_sis.c b/drivers/scsi/sata_sis.c index 2df8c5632ac..7fd45f86de9 100644 --- a/drivers/scsi/sata_sis.c +++ b/drivers/scsi/sata_sis.c @@ -87,11 +87,11 @@ static struct scsi_host_template sis_sht = { .name = DRV_NAME, .ioctl = ata_scsi_ioctl, .queuecommand = ata_scsi_queuecmd, + .eh_timed_out = ata_scsi_timed_out, .eh_strategy_handler = ata_scsi_error, .can_queue = ATA_DEF_QUEUE, .this_id = ATA_SHT_THIS_ID, .sg_tablesize = ATA_MAX_PRD, - .max_sectors = ATA_MAX_SECTORS, .cmd_per_lun = ATA_SHT_CMD_PER_LUN, .emulated = ATA_SHT_EMULATED, .use_clustering = ATA_SHT_USE_CLUSTERING, diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c index d8472563fde..4aaccd53e73 100644 --- a/drivers/scsi/sata_svw.c +++ b/drivers/scsi/sata_svw.c @@ -288,11 +288,11 @@ static struct scsi_host_template k2_sata_sht = { .name = DRV_NAME, .ioctl = ata_scsi_ioctl, .queuecommand = ata_scsi_queuecmd, + .eh_timed_out = ata_scsi_timed_out, .eh_strategy_handler = ata_scsi_error, .can_queue = ATA_DEF_QUEUE, .this_id = ATA_SHT_THIS_ID, .sg_tablesize = LIBATA_MAX_PRD, - .max_sectors = ATA_MAX_SECTORS, .cmd_per_lun = ATA_SHT_CMD_PER_LUN, .emulated = ATA_SHT_EMULATED, .use_clustering = ATA_SHT_USE_CLUSTERING, diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c index bc87c16c80d..9f8a7681540 100644 --- a/drivers/scsi/sata_sx4.c +++ b/drivers/scsi/sata_sx4.c @@ -174,7 +174,7 @@ static void pdc20621_get_from_dimm(struct ata_probe_ent *pe, static void pdc20621_put_to_dimm(struct ata_probe_ent *pe, void *psource, u32 offset, u32 size); static void pdc20621_irq_clear(struct ata_port *ap); -static int pdc20621_qc_issue_prot(struct ata_queued_cmd *qc); +static unsigned int pdc20621_qc_issue_prot(struct ata_queued_cmd *qc); static struct scsi_host_template pdc_sata_sht = { @@ -182,11 +182,11 @@ static struct scsi_host_template pdc_sata_sht = { .name = DRV_NAME, .ioctl = ata_scsi_ioctl, .queuecommand = ata_scsi_queuecmd, + .eh_timed_out = ata_scsi_timed_out, .eh_strategy_handler = ata_scsi_error, .can_queue = ATA_DEF_QUEUE, .this_id = ATA_SHT_THIS_ID, .sg_tablesize = LIBATA_MAX_PRD, - .max_sectors = ATA_MAX_SECTORS, .cmd_per_lun = ATA_SHT_CMD_PER_LUN, .emulated = ATA_SHT_EMULATED, .use_clustering = ATA_SHT_USE_CLUSTERING, @@ -460,7 +460,7 @@ static void pdc20621_dma_prep(struct ata_queued_cmd *qc) unsigned int i, idx, total_len = 0, sgt_len; u32 *buf = (u32 *) &pp->dimm_buf[PDC_DIMM_HEADER_SZ]; - assert(qc->flags & ATA_QCFLAG_DMAMAP); + WARN_ON(!(qc->flags & ATA_QCFLAG_DMAMAP)); VPRINTK("ata%u: ENTER\n", ap->id); @@ -678,7 +678,7 @@ static void pdc20621_packet_start(struct ata_queued_cmd *qc) } } -static int pdc20621_qc_issue_prot(struct ata_queued_cmd *qc) +static unsigned int pdc20621_qc_issue_prot(struct ata_queued_cmd *qc) { switch (qc->tf.protocol) { case ATA_PROT_DMA: @@ -866,26 +866,12 @@ static void pdc_eng_timeout(struct ata_port *ap) spin_lock_irqsave(&host_set->lock, flags); qc = ata_qc_from_tag(ap, ap->active_tag); - if (!qc) { - printk(KERN_ERR "ata%u: BUG: timeout without command\n", - ap->id); - goto out; - } - - /* hack alert! We cannot use the supplied completion - * function from inside the ->eh_strategy_handler() thread. - * libata is the only user of ->eh_strategy_handler() in - * any kernel, so the default scsi_done() assumes it is - * not being called from the SCSI EH. - */ - qc->scsidone = scsi_finish_command; switch (qc->tf.protocol) { case ATA_PROT_DMA: case ATA_PROT_NODATA: printk(KERN_ERR "ata%u: command timeout\n", ap->id); qc->err_mask |= __ac_err_mask(ata_wait_idle(ap)); - ata_qc_complete(qc); break; default: @@ -895,12 +881,11 @@ static void pdc_eng_timeout(struct ata_port *ap) ap->id, qc->tf.command, drv_stat); qc->err_mask |= ac_err_mask(drv_stat); - ata_qc_complete(qc); break; } -out: spin_unlock_irqrestore(&host_set->lock, flags); + ata_eh_qc_complete(qc); DPRINTK("EXIT\n"); } diff --git a/drivers/scsi/sata_uli.c b/drivers/scsi/sata_uli.c index 9635ca70097..37a487b7d65 100644 --- a/drivers/scsi/sata_uli.c +++ b/drivers/scsi/sata_uli.c @@ -75,11 +75,11 @@ static struct scsi_host_template uli_sht = { .name = DRV_NAME, .ioctl = ata_scsi_ioctl, .queuecommand = ata_scsi_queuecmd, + .eh_timed_out = ata_scsi_timed_out, .eh_strategy_handler = ata_scsi_error, .can_queue = ATA_DEF_QUEUE, .this_id = ATA_SHT_THIS_ID, .sg_tablesize = LIBATA_MAX_PRD, - .max_sectors = ATA_MAX_SECTORS, .cmd_per_lun = ATA_SHT_CMD_PER_LUN, .emulated = ATA_SHT_EMULATED, .use_clustering = ATA_SHT_USE_CLUSTERING, diff --git a/drivers/scsi/sata_via.c b/drivers/scsi/sata_via.c index 6d5b0a794cf..ff65a0b0457 100644 --- a/drivers/scsi/sata_via.c +++ b/drivers/scsi/sata_via.c @@ -94,11 +94,11 @@ static struct scsi_host_template svia_sht = { .name = DRV_NAME, .ioctl = ata_scsi_ioctl, .queuecommand = ata_scsi_queuecmd, + .eh_timed_out = ata_scsi_timed_out, .eh_strategy_handler = ata_scsi_error, .can_queue = ATA_DEF_QUEUE, .this_id = ATA_SHT_THIS_ID, .sg_tablesize = LIBATA_MAX_PRD, - .max_sectors = ATA_MAX_SECTORS, .cmd_per_lun = ATA_SHT_CMD_PER_LUN, .emulated = ATA_SHT_EMULATED, .use_clustering = ATA_SHT_USE_CLUSTERING, diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c index e484e8db681..b574379a7a8 100644 --- a/drivers/scsi/sata_vsc.c +++ b/drivers/scsi/sata_vsc.c @@ -251,11 +251,11 @@ static struct scsi_host_template vsc_sata_sht = { .name = DRV_NAME, .ioctl = ata_scsi_ioctl, .queuecommand = ata_scsi_queuecmd, + .eh_timed_out = ata_scsi_timed_out, .eh_strategy_handler = ata_scsi_error, .can_queue = ATA_DEF_QUEUE, .this_id = ATA_SHT_THIS_ID, .sg_tablesize = LIBATA_MAX_PRD, - .max_sectors = ATA_MAX_SECTORS, .cmd_per_lun = ATA_SHT_CMD_PER_LUN, .emulated = ATA_SHT_EMULATED, .use_clustering = ATA_SHT_USE_CLUSTERING, diff --git a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c index f01ec0a7c50..84c3937ae8f 100644 --- a/drivers/scsi/scsi_devinfo.c +++ b/drivers/scsi/scsi_devinfo.c @@ -126,6 +126,7 @@ static struct { {"ADAPTEC", "Adaptec 5400S", NULL, BLIST_FORCELUN}, {"AFT PRO", "-IX CF", "0.0>", BLIST_FORCELUN}, {"BELKIN", "USB 2 HS-CF", "1.95", BLIST_FORCELUN | BLIST_INQUIRY_36}, + {"BROWNIE", "1600U3P", NULL, BLIST_NOREPORTLUN}, {"CANON", "IPUBJD", NULL, BLIST_SPARSELUN}, {"CBOX3", "USB Storage-SMC", "300A", BLIST_FORCELUN | BLIST_INQUIRY_36}, {"CMD", "CRA-7280", NULL, BLIST_SPARSELUN}, /* CMD RAID Controller */ diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index f988418d805..5f0fdfb2618 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -581,8 +581,7 @@ static int scsi_request_sense(struct scsi_cmnd *scmd) * keep a list of pending commands for final completion, and once we * are ready to leave error handling we handle completion for real. **/ -static void scsi_eh_finish_cmd(struct scsi_cmnd *scmd, - struct list_head *done_q) +void scsi_eh_finish_cmd(struct scsi_cmnd *scmd, struct list_head *done_q) { scmd->device->host->host_failed--; scmd->eh_eflags = 0; @@ -594,6 +593,7 @@ static void scsi_eh_finish_cmd(struct scsi_cmnd *scmd, scsi_setup_cmd_retry(scmd); list_move_tail(&scmd->eh_entry, done_q); } +EXPORT_SYMBOL(scsi_eh_finish_cmd); /** * scsi_eh_get_sense - Get device sense data. @@ -1422,7 +1422,7 @@ static void scsi_eh_ready_devs(struct Scsi_Host *shost, * @done_q: list_head of processed commands. * **/ -static void scsi_eh_flush_done_q(struct list_head *done_q) +void scsi_eh_flush_done_q(struct list_head *done_q) { struct scsi_cmnd *scmd, *next; @@ -1451,6 +1451,7 @@ static void scsi_eh_flush_done_q(struct list_head *done_q) } } } +EXPORT_SYMBOL(scsi_eh_flush_done_q); /** * scsi_unjam_host - Attempt to fix a host which has a cmd that failed. diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c index 1883fee96bd..8db656214b5 100644 --- a/drivers/scsi/scsi_transport_fc.c +++ b/drivers/scsi/scsi_transport_fc.c @@ -224,7 +224,7 @@ static void fc_rport_terminate(struct fc_rport *rport); */ #define FC_STARGET_NUM_ATTRS 3 #define FC_RPORT_NUM_ATTRS 9 -#define FC_HOST_NUM_ATTRS 16 +#define FC_HOST_NUM_ATTRS 17 struct fc_internal { struct scsi_transport_template t; |