diff options
Diffstat (limited to 'drivers/scsi')
27 files changed, 71 insertions, 71 deletions
diff --git a/drivers/scsi/53c700.c b/drivers/scsi/53c700.c index f5a9addb705..07ce9bfcdf0 100644 --- a/drivers/scsi/53c700.c +++ b/drivers/scsi/53c700.c @@ -1491,7 +1491,7 @@ NCR_700_intr(int irq, void *dev_id) unsigned long flags; int handled = 0; - /* Use the host lock to serialise acess to the 53c700 + /* Use the host lock to serialise access to the 53c700 * hardware. Note: In future, we may need to take the queue * lock to enter the done routines. When that happens, we * need to ensure that for this driver, the host lock and the diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h index cdbdec9f4fb..83986ed8655 100644 --- a/drivers/scsi/aacraid/aacraid.h +++ b/drivers/scsi/aacraid/aacraid.h @@ -526,10 +526,10 @@ struct aac_driver_ident /* * The adapter interface specs all queues to be located in the same - * physically contigous block. The host structure that defines the + * physically contiguous block. The host structure that defines the * commuication queues will assume they are each a separate physically - * contigous memory region that will support them all being one big - * contigous block. + * contiguous memory region that will support them all being one big + * contiguous block. * There is a command and response queue for each level and direction of * commuication. These regions are accessed by both the host and adapter. */ diff --git a/drivers/scsi/aacraid/comminit.c b/drivers/scsi/aacraid/comminit.c index d598eba630d..666d5151d62 100644 --- a/drivers/scsi/aacraid/comminit.c +++ b/drivers/scsi/aacraid/comminit.c @@ -226,7 +226,7 @@ static int aac_comm_init(struct aac_dev * dev) spin_lock_init(&dev->fib_lock); /* - * Allocate the physically contigous space for the commuication + * Allocate the physically contiguous space for the commuication * queue headers. */ diff --git a/drivers/scsi/aic7xxx/aic79xx.seq b/drivers/scsi/aic7xxx/aic79xx.seq index 3b66b5ae3d9..2fb78e35a9e 100644 --- a/drivers/scsi/aic7xxx/aic79xx.seq +++ b/drivers/scsi/aic7xxx/aic79xx.seq @@ -217,7 +217,7 @@ BEGIN_CRITICAL; scbdma_tohost_done: test CCSCBCTL, CCARREN jz fill_qoutfifo_dmadone; /* - * An SCB has been succesfully uploaded to the host. + * An SCB has been successfully uploaded to the host. * If the SCB was uploaded for some reason other than * bad SCSI status (currently only for underruns), we * queue the SCB for normal completion. Otherwise, we diff --git a/drivers/scsi/aic7xxx/aic79xx_core.c b/drivers/scsi/aic7xxx/aic79xx_core.c index 63b521d615f..4d419c155ce 100644 --- a/drivers/scsi/aic7xxx/aic79xx_core.c +++ b/drivers/scsi/aic7xxx/aic79xx_core.c @@ -2487,7 +2487,7 @@ ahd_handle_scsiint(struct ahd_softc *ahd, u_int intstat) /* * Although the driver does not care about the * 'Selection in Progress' status bit, the busy - * LED does. SELINGO is only cleared by a sucessfull + * LED does. SELINGO is only cleared by a successfull * selection, so we must manually clear it to insure * the LED turns off just incase no future successful * selections occur (e.g. no devices on the bus). diff --git a/drivers/scsi/aic7xxx/aic7xxx_core.c b/drivers/scsi/aic7xxx/aic7xxx_core.c index 8dfb59d5899..45aa728a76b 100644 --- a/drivers/scsi/aic7xxx/aic7xxx_core.c +++ b/drivers/scsi/aic7xxx/aic7xxx_core.c @@ -1733,7 +1733,7 @@ ahc_handle_scsiint(struct ahc_softc *ahc, u_int intstat) /* * Although the driver does not care about the * 'Selection in Progress' status bit, the busy - * LED does. SELINGO is only cleared by a sucessfull + * LED does. SELINGO is only cleared by a successfull * selection, so we must manually clear it to insure * the LED turns off just incase no future successful * selections occur (e.g. no devices on the bus). diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_pport.h b/drivers/scsi/bfa/include/defs/bfa_defs_pport.h index a000bc4e2d4..bf320412ee2 100644 --- a/drivers/scsi/bfa/include/defs/bfa_defs_pport.h +++ b/drivers/scsi/bfa/include/defs/bfa_defs_pport.h @@ -61,7 +61,7 @@ enum bfa_pport_speed { * Port operational type (in sync with SNIA port type). */ enum bfa_pport_type { - BFA_PPORT_TYPE_UNKNOWN = 1, /* port type is unkown */ + BFA_PPORT_TYPE_UNKNOWN = 1, /* port type is unknown */ BFA_PPORT_TYPE_TRUNKED = 2, /* Trunked mode */ BFA_PPORT_TYPE_NPORT = 5, /* P2P with switched fabric */ BFA_PPORT_TYPE_NLPORT = 6, /* public loop */ diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_tsensor.h b/drivers/scsi/bfa/include/defs/bfa_defs_tsensor.h index 31881d21851..ade763dbc8c 100644 --- a/drivers/scsi/bfa/include/defs/bfa_defs_tsensor.h +++ b/drivers/scsi/bfa/include/defs/bfa_defs_tsensor.h @@ -25,7 +25,7 @@ * Temperature sensor status values */ enum bfa_tsensor_status { - BFA_TSENSOR_STATUS_UNKNOWN = 1, /* unkown status */ + BFA_TSENSOR_STATUS_UNKNOWN = 1, /* unknown status */ BFA_TSENSOR_STATUS_FAULTY = 2, /* sensor is faulty */ BFA_TSENSOR_STATUS_BELOW_MIN = 3, /* temperature below mininum */ BFA_TSENSOR_STATUS_NOMINAL = 4, /* normal temperature */ diff --git a/drivers/scsi/hptiop.c b/drivers/scsi/hptiop.c index a0e7e711ff9..5be67a6fca9 100644 --- a/drivers/scsi/hptiop.c +++ b/drivers/scsi/hptiop.c @@ -834,7 +834,7 @@ static int hptiop_reset_hba(struct hptiop_hba *hba) atomic_read(&hba->resetting) == 0, 60 * HZ); if (atomic_read(&hba->resetting)) { - /* IOP is in unkown state, abort reset */ + /* IOP is in unknown state, abort reset */ printk(KERN_ERR "scsi%d: reset failed\n", hba->host->host_no); return -1; } diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c index bd2f7719744..6486ae4591b 100644 --- a/drivers/scsi/libfc/fc_lport.c +++ b/drivers/scsi/libfc/fc_lport.c @@ -56,7 +56,7 @@ * at the same time. * * When discovery succeeds or fails a callback is made to the lport as - * notification. Currently, succesful discovery causes the lport to take no + * notification. Currently, successful discovery causes the lport to take no * action. A failure will cause the lport to reset. There is likely a circular * locking problem with this implementation. */ diff --git a/drivers/scsi/libiscsi_tcp.c b/drivers/scsi/libiscsi_tcp.c index 2e0746d7030..ca25ee5190b 100644 --- a/drivers/scsi/libiscsi_tcp.c +++ b/drivers/scsi/libiscsi_tcp.c @@ -1004,7 +1004,7 @@ static struct iscsi_r2t_info *iscsi_tcp_get_curr_r2t(struct iscsi_task *task) * iscsi_tcp_task_xmit - xmit normal PDU task * @task: iscsi command task * - * We're expected to return 0 when everything was transmitted succesfully, + * We're expected to return 0 when everything was transmitted successfully, * -EAGAIN if there's still data in the queue, or != 0 for any other kind * of error. */ diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index e1a30a16a9f..9bd19aa1424 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -654,7 +654,7 @@ lpfc_selective_reset(struct lpfc_hba *phba) * Notes: * Assumes any error from lpfc_selective_reset() will be negative. * If lpfc_selective_reset() returns zero then the length of the buffer - * is returned which indicates succcess + * is returned which indicates success * * Returns: * -EINVAL if the buffer does not contain the string "selective" @@ -3147,7 +3147,7 @@ sysfs_ctlreg_write(struct kobject *kobj, struct bin_attribute *bin_attr, * sysfs_ctlreg_read - Read method for reading from ctlreg * @kobj: kernel kobject that contains the kernel class device. * @bin_attr: kernel attributes passed to us. - * @buf: if succesful contains the data from the adapter IOREG space. + * @buf: if successful contains the data from the adapter IOREG space. * @off: offset into buffer to beginning of data. * @count: bytes to transfer. * diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index 45337cd23fe..a14ab4580d4 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -802,7 +802,7 @@ lpfc_cmpl_els_flogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, /* FLOGI completes successfully */ lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS, - "0101 FLOGI completes sucessfully " + "0101 FLOGI completes successfully " "Data: x%x x%x x%x x%x\n", irsp->un.ulpWord[4], sp->cmn.e_d_tov, sp->cmn.w2.r_a_tov, sp->cmn.edtovResolution); @@ -4133,7 +4133,7 @@ lpfc_els_rcv_rscn(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, /* Indicate we are walking fc_rscn_id_list on this vport */ vport->fc_rscn_flush = 1; spin_unlock_irq(shost->host_lock); - /* Get the array count after sucessfully have the token */ + /* Get the array count after successfully have the token */ rscn_cnt = vport->fc_rscn_id_cnt; /* If we are already processing an RSCN, save the received * RSCN payload buffer, cmdiocb->context2 to process later. diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 562d8cee874..82f8ab5c72c 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -645,7 +645,7 @@ lpfc_hba_down_prep(struct lpfc_hba *phba) * down the SLI Layer. * * Return codes - * 0 - sucess. + * 0 - success. * Any other value - error. **/ static int @@ -700,7 +700,7 @@ lpfc_hba_down_post_s3(struct lpfc_hba *phba) * down the SLI Layer. * * Return codes - * 0 - sucess. + * 0 - success. * Any other value - error. **/ static int @@ -755,7 +755,7 @@ lpfc_hba_down_post_s4(struct lpfc_hba *phba) * uninitialization after the HBA is reset when bring down the SLI Layer. * * Return codes - * 0 - sucess. + * 0 - success. * Any other value - error. **/ int @@ -1254,7 +1254,7 @@ lpfc_handle_eratt_s4(struct lpfc_hba *phba) * routine from the API jump table function pointer from the lpfc_hba struct. * * Return codes - * 0 - sucess. + * 0 - success. * Any other value - error. **/ void @@ -3124,7 +3124,7 @@ static void lpfc_log_intr_mode(struct lpfc_hba *phba, uint32_t intr_mode) * PCI devices. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static int @@ -3220,7 +3220,7 @@ lpfc_reset_hba(struct lpfc_hba *phba) * support the SLI-3 HBA device it attached to. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static int @@ -3321,7 +3321,7 @@ lpfc_sli_driver_resource_unset(struct lpfc_hba *phba) * support the SLI-4 HBA device it attached to. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static int @@ -3642,7 +3642,7 @@ lpfc_init_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp) * device specific resource setup to support the HBA device it attached to. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static int @@ -3688,7 +3688,7 @@ lpfc_setup_driver_resource_phase1(struct lpfc_hba *phba) * device specific resource setup to support the HBA device it attached to. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static int @@ -3753,7 +3753,7 @@ lpfc_free_iocb_list(struct lpfc_hba *phba) * list and set up the IOCB tag array accordingly. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static int @@ -3872,7 +3872,7 @@ lpfc_free_active_sgl(struct lpfc_hba *phba) * list and set up the sgl xritag tag array accordingly. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static int @@ -3986,7 +3986,7 @@ out_free_mem: * enabled and the driver is reinitializing the device. * * Return codes - * 0 - sucessful + * 0 - successful * ENOMEM - No availble memory * EIO - The mailbox failed to complete successfully. **/ @@ -4146,7 +4146,7 @@ lpfc_sli4_remove_rpi_hdrs(struct lpfc_hba *phba) * PCI device data structure is set. * * Return codes - * pointer to @phba - sucessful + * pointer to @phba - successful * NULL - error **/ static struct lpfc_hba * @@ -4202,7 +4202,7 @@ lpfc_hba_free(struct lpfc_hba *phba) * host with it. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static int @@ -4365,7 +4365,7 @@ lpfc_post_init_setup(struct lpfc_hba *phba) * with SLI-3 interface spec. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static int @@ -4662,7 +4662,7 @@ lpfc_sli4_bar2_register_memmap(struct lpfc_hba *phba, uint32_t vf) * this routine. * * Return codes - * 0 - sucessful + * 0 - successful * ENOMEM - could not allocated memory. **/ static int @@ -4761,7 +4761,7 @@ lpfc_destroy_bootstrap_mbox(struct lpfc_hba *phba) * allocation for the port. * * Return codes - * 0 - sucessful + * 0 - successful * ENOMEM - No availble memory * EIO - The mailbox failed to complete successfully. **/ @@ -4861,7 +4861,7 @@ lpfc_sli4_read_config(struct lpfc_hba *phba) * HBA consistent with the SLI-4 interface spec. * * Return codes - * 0 - sucessful + * 0 - successful * ENOMEM - No availble memory * EIO - The mailbox failed to complete successfully. **/ @@ -4910,7 +4910,7 @@ lpfc_setup_endian_order(struct lpfc_hba *phba) * we just use some constant number as place holder. * * Return codes - * 0 - sucessful + * 0 - successful * ENOMEM - No availble memory * EIO - The mailbox failed to complete successfully. **/ @@ -5218,7 +5218,7 @@ out_error: * operation. * * Return codes - * 0 - sucessful + * 0 - successful * ENOMEM - No availble memory * EIO - The mailbox failed to complete successfully. **/ @@ -5286,7 +5286,7 @@ lpfc_sli4_queue_destroy(struct lpfc_hba *phba) * operation. * * Return codes - * 0 - sucessful + * 0 - successful * ENOMEM - No availble memory * EIO - The mailbox failed to complete successfully. **/ @@ -5552,7 +5552,7 @@ out_error: * operation. * * Return codes - * 0 - sucessful + * 0 - successful * ENOMEM - No availble memory * EIO - The mailbox failed to complete successfully. **/ @@ -5599,7 +5599,7 @@ lpfc_sli4_queue_unset(struct lpfc_hba *phba) * Later, this can be used for all the slow-path events. * * Return codes - * 0 - sucessful + * 0 - successful * -ENOMEM - No availble memory **/ static int @@ -5760,7 +5760,7 @@ lpfc_sli4_cq_event_release_all(struct lpfc_hba *phba) * all resources assigned to the PCI function which originates this request. * * Return codes - * 0 - sucessful + * 0 - successful * ENOMEM - No availble memory * EIO - The mailbox failed to complete successfully. **/ @@ -5923,7 +5923,7 @@ lpfc_sli4_fcfi_unreg(struct lpfc_hba *phba, uint16_t fcfi) * with SLI-4 interface spec. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static int @@ -6052,7 +6052,7 @@ lpfc_sli4_pci_mem_unset(struct lpfc_hba *phba) * will be left with MSI-X enabled and leaks its vectors. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static int @@ -6184,7 +6184,7 @@ lpfc_sli_disable_msix(struct lpfc_hba *phba) * is done in this function. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error */ static int @@ -6243,7 +6243,7 @@ lpfc_sli_disable_msi(struct lpfc_hba *phba) * MSI-X -> MSI -> IRQ. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static uint32_t @@ -6333,7 +6333,7 @@ lpfc_sli_disable_intr(struct lpfc_hba *phba) * enabled and leaks its vectors. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static int @@ -6443,7 +6443,7 @@ lpfc_sli4_disable_msix(struct lpfc_hba *phba) * which is done in this function. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static int @@ -6508,7 +6508,7 @@ lpfc_sli4_disable_msi(struct lpfc_hba *phba) * MSI-X -> MSI -> IRQ. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static uint32_t diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 43cbe336f1f..42d4f3dae1d 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -1794,7 +1794,7 @@ lpfc_sli_handle_mb_event(struct lpfc_hba *phba) */ if (lpfc_sli_chk_mbx_command(pmbox->mbxCommand) == MBX_SHUTDOWN) { - /* Unknow mailbox command compl */ + /* Unknown mailbox command compl */ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI, "(%d):0323 Unknown Mailbox command " "x%x (x%x) Cmpl\n", @@ -4163,7 +4163,7 @@ lpfc_sli4_read_fcoe_params(struct lpfc_hba *phba, * addition, this routine gets the port vpd data. * * Return codes - * 0 - sucessful + * 0 - successful * ENOMEM - could not allocated memory. **/ static int @@ -11091,7 +11091,7 @@ lpfc_sli4_handle_received_buffer(struct lpfc_hba *phba) * sequential. * * Return codes - * 0 - sucessful + * 0 - successful * EIO - The mailbox failed to complete successfully. * When this error occurs, the driver is not guaranteed * to have any rpi regions posted to the device and @@ -11129,7 +11129,7 @@ lpfc_sli4_post_all_rpi_hdrs(struct lpfc_hba *phba) * maps up to 64 rpi context regions. * * Return codes - * 0 - sucessful + * 0 - successful * ENOMEM - No available memory * EIO - The mailbox failed to complete successfully. **/ @@ -11191,7 +11191,7 @@ lpfc_sli4_post_rpi_hdr(struct lpfc_hba *phba, struct lpfc_rpi_hdr *rpi_page) * PAGE_SIZE modulo 64 rpi context headers. * * Returns - * A nonzero rpi defined as rpi_base <= rpi < max_rpi if sucessful + * A nonzero rpi defined as rpi_base <= rpi < max_rpi if successful * LPFC_RPI_ALLOC_ERROR if no rpis are available. **/ int diff --git a/drivers/scsi/megaraid.h b/drivers/scsi/megaraid.h index 512c2cc1a33..d310f49d077 100644 --- a/drivers/scsi/megaraid.h +++ b/drivers/scsi/megaraid.h @@ -381,7 +381,7 @@ typedef struct { u8 battery_status; /* * BIT 0: battery module missing * BIT 1: VBAD - * BIT 2: temprature high + * BIT 2: temperature high * BIT 3: battery pack missing * BIT 4,5: * 00 - charge complete diff --git a/drivers/scsi/megaraid/mbox_defs.h b/drivers/scsi/megaraid/mbox_defs.h index b25b74764ec..ce2487a888e 100644 --- a/drivers/scsi/megaraid/mbox_defs.h +++ b/drivers/scsi/megaraid/mbox_defs.h @@ -497,7 +497,7 @@ typedef struct { * @inserted_drive : channel:Id of inserted drive * @battery_status : bit 0: battery module missing * bit 1: VBAD - * bit 2: temprature high + * bit 2: temperature high * bit 3: battery pack missing * bit 4,5: * 00 - charge complete diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c index 234f0b7eb21..f9ae8037a71 100644 --- a/drivers/scsi/megaraid/megaraid_mbox.c +++ b/drivers/scsi/megaraid/megaraid_mbox.c @@ -2704,7 +2704,7 @@ megaraid_reset_handler(struct scsi_cmnd *scp) } else { con_log(CL_ANN, (KERN_NOTICE - "megaraid mbox: reset sequence completed sucessfully\n")); + "megaraid mbox: reset sequence completed successfully\n")); } diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index 86ab32d7ab1..756e509d495 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -2894,7 +2894,7 @@ _scsih_normalize_sense(char *sense_buffer, struct sense_info *data) #ifdef CONFIG_SCSI_MPT2SAS_LOGGING /** - * _scsih_scsi_ioc_info - translated non-succesfull SCSI_IO request + * _scsih_scsi_ioc_info - translated non-successfull SCSI_IO request * @ioc: per adapter object * @scmd: pointer to scsi command object * @mpi_reply: reply mf payload returned from firmware diff --git a/drivers/scsi/ncr53c8xx.c b/drivers/scsi/ncr53c8xx.c index e3c482aa87b..a2d56982830 100644 --- a/drivers/scsi/ncr53c8xx.c +++ b/drivers/scsi/ncr53c8xx.c @@ -6495,7 +6495,7 @@ static void ncr_int_ma (struct ncb *np) ** we force a SIR_NEGO_PROTO interrupt (it is a hack that avoids ** bloat for such a should_not_happen situation). ** In all other situation, we reset the BUS. - ** Are these assumptions reasonnable ? (Wait and see ...) + ** Are these assumptions reasonable ? (Wait and see ...) */ unexpected_phase: dsp -= 8; diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c index f7c70e2a822..d3d39f86fcf 100644 --- a/drivers/scsi/pmcraid.c +++ b/drivers/scsi/pmcraid.c @@ -3342,7 +3342,7 @@ static int pmcraid_chr_fasync(int fd, struct file *filep, int mode) * @direction : data transfer direction * * Return value - * 0 on sucess, non-zero error code on failure + * 0 on success, non-zero error code on failure */ static int pmcraid_build_passthrough_ioadls( struct pmcraid_cmd *cmd, @@ -3401,7 +3401,7 @@ static int pmcraid_build_passthrough_ioadls( * @direction: data transfer direction * * Return value - * 0 on sucess, non-zero error code on failure + * 0 on success, non-zero error code on failure */ static void pmcraid_release_passthrough_ioadls( struct pmcraid_cmd *cmd, @@ -3429,7 +3429,7 @@ static void pmcraid_release_passthrough_ioadls( * @arg: pointer to pmcraid_passthrough_buffer user buffer * * Return value - * 0 on sucess, non-zero error code on failure + * 0 on success, non-zero error code on failure */ static long pmcraid_ioctl_passthrough( struct pmcraid_instance *pinstance, diff --git a/drivers/scsi/pmcraid.h b/drivers/scsi/pmcraid.h index 3441b3f9082..2752b56cad5 100644 --- a/drivers/scsi/pmcraid.h +++ b/drivers/scsi/pmcraid.h @@ -771,11 +771,11 @@ static struct pmcraid_ioasc_error pmcraid_ioasc_error_table[] = { {0x01180600, IOASC_LOG_LEVEL_MUST, "Recovered Error, soft media error, sector reassignment suggested"}, {0x015D0000, IOASC_LOG_LEVEL_MUST, - "Recovered Error, failure prediction thresold exceeded"}, + "Recovered Error, failure prediction threshold exceeded"}, {0x015D9200, IOASC_LOG_LEVEL_MUST, - "Recovered Error, soft Cache Card Battery error thresold"}, + "Recovered Error, soft Cache Card Battery error threshold"}, {0x015D9200, IOASC_LOG_LEVEL_MUST, - "Recovered Error, soft Cache Card Battery error thresold"}, + "Recovered Error, soft Cache Card Battery error threshold"}, {0x02048000, IOASC_LOG_LEVEL_MUST, "Not Ready, IOA Reset Required"}, {0x02408500, IOASC_LOG_LEVEL_MUST, diff --git a/drivers/scsi/scsi_netlink.c b/drivers/scsi/scsi_netlink.c index 723fdecd91b..0fd6ae6911a 100644 --- a/drivers/scsi/scsi_netlink.c +++ b/drivers/scsi/scsi_netlink.c @@ -613,7 +613,7 @@ EXPORT_SYMBOL_GPL(scsi_nl_send_transport_msg); * @data_buf: pointer to vendor unique data buffer * * Returns: - * 0 on succesful return + * 0 on successful return * otherwise, failing error code * * Notes: diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c index fd47cb1bee1..f27e52d963d 100644 --- a/drivers/scsi/scsi_transport_sas.c +++ b/drivers/scsi/scsi_transport_sas.c @@ -666,7 +666,7 @@ EXPORT_SYMBOL(sas_phy_add); * * Note: * This function must only be called on a PHY that has not - * sucessfully been added using sas_phy_add(). + * successfully been added using sas_phy_add(). */ void sas_phy_free(struct sas_phy *phy) { @@ -896,7 +896,7 @@ EXPORT_SYMBOL(sas_port_add); * * Note: * This function must only be called on a PORT that has not - * sucessfully been added using sas_port_add(). + * successfully been added using sas_port_add(). */ void sas_port_free(struct sas_port *port) { @@ -1476,7 +1476,7 @@ EXPORT_SYMBOL(sas_rphy_add); * * Note: * This function must only be called on a remote - * PHY that has not sucessfully been added using + * PHY that has not successfully been added using * sas_rphy_add() (or has been sas_rphy_remove()'d) */ void sas_rphy_free(struct sas_rphy *rphy) diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c index 45374d66d26..2b38f6ad6e1 100644 --- a/drivers/scsi/sym53c8xx_2/sym_glue.c +++ b/drivers/scsi/sym53c8xx_2/sym_glue.c @@ -1864,7 +1864,7 @@ static pci_ers_result_t sym2_io_slot_dump(struct pci_dev *pdev) * * This routine is similar to sym_set_workarounds(), except * that, at this point, we already know that the device was - * succesfully intialized at least once before, and so most + * successfully intialized at least once before, and so most * of the steps taken there are un-needed here. */ static void sym2_reset_workarounds(struct pci_dev *pdev) diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.c b/drivers/scsi/sym53c8xx_2/sym_hipd.c index 297deb817a5..a7bc8b7b09a 100644 --- a/drivers/scsi/sym53c8xx_2/sym_hipd.c +++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c @@ -2692,7 +2692,7 @@ static void sym_int_ma (struct sym_hcb *np) * we force a SIR_NEGO_PROTO interrupt (it is a hack that avoids * bloat for such a should_not_happen situation). * In all other situation, we reset the BUS. - * Are these assumptions reasonnable ? (Wait and see ...) + * Are these assumptions reasonable ? (Wait and see ...) */ unexpected_phase: dsp -= 8; diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.h b/drivers/scsi/sym53c8xx_2/sym_hipd.h index 053e63c8682..5a80cbac3f9 100644 --- a/drivers/scsi/sym53c8xx_2/sym_hipd.h +++ b/drivers/scsi/sym53c8xx_2/sym_hipd.h @@ -54,7 +54,7 @@ * * SYM_OPT_LIMIT_COMMAND_REORDERING * When this option is set, the driver tries to limit tagged - * command reordering to some reasonnable value. + * command reordering to some reasonable value. * (set for Linux) */ #if 0 |