diff options
Diffstat (limited to 'drivers/scsi')
134 files changed, 324 insertions, 324 deletions
diff --git a/drivers/scsi/3w-9xxx.h b/drivers/scsi/3w-9xxx.h index 3343824855d..040f7214e5b 100644 --- a/drivers/scsi/3w-9xxx.h +++ b/drivers/scsi/3w-9xxx.h @@ -61,7 +61,7 @@ static twa_message_type twa_aen_table[] = { {0x0000, "AEN queue empty"}, {0x0001, "Controller reset occurred"}, {0x0002, "Degraded unit detected"}, - {0x0003, "Controller error occured"}, + {0x0003, "Controller error occurred"}, {0x0004, "Background rebuild failed"}, {0x0005, "Background rebuild done"}, {0x0006, "Incomplete unit detected"}, diff --git a/drivers/scsi/3w-xxxx.h b/drivers/scsi/3w-xxxx.h index 8b9f9d17e7f..49dcf03c631 100644 --- a/drivers/scsi/3w-xxxx.h +++ b/drivers/scsi/3w-xxxx.h @@ -8,7 +8,7 @@ Copyright (C) 1999-2010 3ware Inc. - Kernel compatiblity By: Andre Hedrick <andre@suse.com> + Kernel compatibility By: Andre Hedrick <andre@suse.com> Non-Copyright (C) 2000 Andre Hedrick <andre@suse.com> This program is free software; you can redistribute it and/or modify diff --git a/drivers/scsi/53c700.scr b/drivers/scsi/53c700.scr index a064a092c60..ec822e3b7a2 100644 --- a/drivers/scsi/53c700.scr +++ b/drivers/scsi/53c700.scr @@ -31,7 +31,7 @@ ABSOLUTE StatusAddress = 0 ; Addr to receive status return ABSOLUTE ReceiveMsgAddress = 0 ; Addr to receive msg ; ; This is the magic component for handling scatter-gather. Each of the -; SG components is preceeded by a script fragment which moves the +; SG components is preceded by a script fragment which moves the ; necessary amount of data and jumps to the next SG segment. The final ; SG segment jumps back to . However, this address is the first SG script ; segment. diff --git a/drivers/scsi/53c700_d.h_shipped b/drivers/scsi/53c700_d.h_shipped index 0b42a51257f..aa623da333c 100644 --- a/drivers/scsi/53c700_d.h_shipped +++ b/drivers/scsi/53c700_d.h_shipped @@ -34,7 +34,7 @@ ABSOLUTE StatusAddress = 0 ; Addr to receive status return ABSOLUTE ReceiveMsgAddress = 0 ; Addr to receive msg ; ; This is the magic component for handling scatter-gather. Each of the -; SG components is preceeded by a script fragment which moves the +; SG components is preceded by a script fragment which moves the ; necessary amount of data and jumps to the next SG segment. The final ; SG segment jumps back to . However, this address is the first SG script ; segment. diff --git a/drivers/scsi/FlashPoint.c b/drivers/scsi/FlashPoint.c index e40cdfb7541..dcd716d6860 100644 --- a/drivers/scsi/FlashPoint.c +++ b/drivers/scsi/FlashPoint.c @@ -2509,7 +2509,7 @@ static void FPT_ssel(unsigned long port, unsigned char p_card) WR_HARPOON(port + hp_autostart_3, (SELECT + SELCHK_STRT)); - /* Setup our STATE so we know what happend when + /* Setup our STATE so we know what happened when the wheels fall off. */ currSCCB->Sccb_scsistat = SELECT_ST; @@ -2900,7 +2900,7 @@ static void FPT_SendMsg(unsigned long port, unsigned char message) * * Function: FPT_sdecm * - * Description: Determine the proper responce to the message from the + * Description: Determine the proper response to the message from the * target device. * *---------------------------------------------------------------------*/ diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c index e7cd2fcbe03..165e4dd865d 100644 --- a/drivers/scsi/NCR5380.c +++ b/drivers/scsi/NCR5380.c @@ -1198,12 +1198,12 @@ static irqreturn_t NCR5380_intr(int dummy, void *dev_id) */ if ((NCR5380_read(MODE_REG) & MR_DMA) && ((basr & BASR_END_DMA_TRANSFER) || !(basr & BASR_PHASE_MATCH))) { - int transfered; + int transferred; if (!hostdata->connected) panic("scsi%d : received end of DMA interrupt with no connected cmd\n", instance->hostno); - transfered = (hostdata->dmalen - NCR5380_dma_residual(instance)); + transferred = (hostdata->dmalen - NCR5380_dma_residual(instance)); hostdata->connected->SCp.this_residual -= transferred; hostdata->connected->SCp.ptr += transferred; hostdata->dmalen = 0; @@ -1563,7 +1563,7 @@ failed: * bytes to transfer, **data - pointer to data pointer. * * Returns : -1 when different phase is entered without transferring - * maximum number of bytes, 0 if all bytes or transfered or exit + * maximum number of bytes, 0 if all bytes or transferred or exit * is in same phase. * * Also, *phase, *count, *data are modified in place. @@ -1800,7 +1800,7 @@ static int do_abort(struct Scsi_Host *host) { * bytes to transfer, **data - pointer to data pointer. * * Returns : -1 when different phase is entered without transferring - * maximum number of bytes, 0 if all bytes or transfered or exit + * maximum number of bytes, 0 if all bytes or transferred or exit * is in same phase. * * Also, *phase, *count, *data are modified in place. diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c index 118ce83a737..06199574144 100644 --- a/drivers/scsi/aacraid/aachba.c +++ b/drivers/scsi/aacraid/aachba.c @@ -747,8 +747,8 @@ char * get_container_type(unsigned tindex) * Arguments: [1] pointer to void [1] int * * Purpose: Sets SCSI inquiry data strings for vendor, product - * and revision level. Allows strings to be set in platform dependant - * files instead of in OS dependant driver source. + * and revision level. Allows strings to be set in platform dependent + * files instead of in OS dependent driver source. */ static void setinqstr(struct aac_dev *dev, void *data, int tindex) diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h index 29ab00016b7..ffb587817ef 100644 --- a/drivers/scsi/aacraid/aacraid.h +++ b/drivers/scsi/aacraid/aacraid.h @@ -1259,7 +1259,7 @@ struct aac_dev #define CACHE_UNSTABLE 2 /* - * Lets the client know at which level the data was commited on + * Lets the client know at which level the data was committed on * a write request */ diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c index dd7ad3ba2da..e7d0d47b918 100644 --- a/drivers/scsi/aacraid/commsup.c +++ b/drivers/scsi/aacraid/commsup.c @@ -421,7 +421,7 @@ int aac_fib_send(u16 command, struct fib *fibptr, unsigned long size, if (!(hw_fib->header.XferState & cpu_to_le32(HostOwned))) return -EBUSY; /* - * There are 5 cases with the wait and reponse requested flags. + * There are 5 cases with the wait and response requested flags. * The only invalid cases are if the caller requests to wait and * does not request a response and if the caller does not want a * response and the Fib is not allocated from pool. If a response diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c index 081c6de92bc..bfd618a6949 100644 --- a/drivers/scsi/advansys.c +++ b/drivers/scsi/advansys.c @@ -4544,7 +4544,7 @@ AscMemWordCopyPtrToLram(PortAddr iop_base, ushort s_addr, * Copy 4 bytes to LRAM. * * The source data is assumed to be in little-endian order in memory - * and is maintained in little-endian order when writen to LRAM. + * and is maintained in little-endian order when written to LRAM. */ static void AscMemDWordCopyPtrToLram(PortAddr iop_base, diff --git a/drivers/scsi/aha1740.c b/drivers/scsi/aha1740.c index d058f1ab82b..1c10b796c1a 100644 --- a/drivers/scsi/aha1740.c +++ b/drivers/scsi/aha1740.c @@ -461,7 +461,7 @@ static int aha1740_queuecommand_lck(Scsi_Cmnd * SCpnt, void (*done)(Scsi_Cmnd *) /* The Adaptec Spec says the card is so fast that the loops will only be executed once in the code below. Even if this was true with the fastest processors when the spec was - written, it doesn't seem to be true with todays fast + written, it doesn't seem to be true with today's fast processors. We print a warning if the code is executed more often than LOOPCNT_WARN. If this happens, it should be investigated. If the count reaches LOOPCNT_MAX, we assume diff --git a/drivers/scsi/aic7xxx/aic79xx.h b/drivers/scsi/aic7xxx/aic79xx.h index 95ee5038518..9b059422aac 100644 --- a/drivers/scsi/aic7xxx/aic79xx.h +++ b/drivers/scsi/aic7xxx/aic79xx.h @@ -473,7 +473,7 @@ struct hardware_scb { * o A residual has occurred if SG_FULL_RESID is set in sgptr, * or residual_sgptr does not have SG_LIST_NULL set. * - * o We are transfering the last segment if residual_datacnt has + * o We are transferring the last segment if residual_datacnt has * the SG_LAST_SEG flag set. * * Host: @@ -516,7 +516,7 @@ struct hardware_scb { */ /* - * Definition of a scatter/gather element as transfered to the controller. + * Definition of a scatter/gather element as transferred to the controller. * The aic7xxx chips only support a 24bit length. We use the top byte of * the length to store additional address bits and a flag to indicate * that a given segment terminates the transfer. This gives us an diff --git a/drivers/scsi/aic7xxx/aic79xx.reg b/drivers/scsi/aic7xxx/aic79xx.reg index 0666c22ab55..7e12c31ccfd 100644 --- a/drivers/scsi/aic7xxx/aic79xx.reg +++ b/drivers/scsi/aic7xxx/aic79xx.reg @@ -305,7 +305,7 @@ register HS_MAILBOX { } /* - * Sequencer Interupt Status + * Sequencer Interrupt Status */ register SEQINTSTAT { address 0x00C @@ -685,7 +685,7 @@ register DCHRXMSG0 { } /* - * CMC Recieve Message 0 + * CMC Receive Message 0 */ register CMCRXMSG0 { address 0x090 @@ -696,7 +696,7 @@ register CMCRXMSG0 { } /* - * Overlay Recieve Message 0 + * Overlay Receive Message 0 */ register OVLYRXMSG0 { address 0x090 @@ -732,7 +732,7 @@ register DCHRXMSG1 { } /* - * CMC Recieve Message 1 + * CMC Receive Message 1 */ register CMCRXMSG1 { address 0x091 @@ -742,7 +742,7 @@ register CMCRXMSG1 { } /* - * Overlay Recieve Message 1 + * Overlay Receive Message 1 */ register OVLYRXMSG1 { address 0x091 @@ -777,7 +777,7 @@ register DCHRXMSG2 { } /* - * CMC Recieve Message 2 + * CMC Receive Message 2 */ register CMCRXMSG2 { address 0x092 @@ -787,7 +787,7 @@ register CMCRXMSG2 { } /* - * Overlay Recieve Message 2 + * Overlay Receive Message 2 */ register OVLYRXMSG2 { address 0x092 @@ -816,7 +816,7 @@ register DCHRXMSG3 { } /* - * CMC Recieve Message 3 + * CMC Receive Message 3 */ register CMCRXMSG3 { address 0x093 @@ -826,7 +826,7 @@ register CMCRXMSG3 { } /* - * Overlay Recieve Message 3 + * Overlay Receive Message 3 */ register OVLYRXMSG3 { address 0x093 @@ -1249,7 +1249,7 @@ register TARGPCISTAT { /* * LQ Packet In - * The last LQ Packet recieved + * The last LQ Packet received */ register LQIN { address 0x020 @@ -2573,7 +2573,7 @@ register IOPDNCTL { } /* - * Shaddow Host Address. + * Shadow Host Address. */ register SHADDR { address 0x060 @@ -3983,7 +3983,7 @@ scratch_ram { /* * The maximum amount of time to wait, when interrupt coalescing - * is enabled, before issueing a CMDCMPLT interrupt for a completed + * is enabled, before issuing a CMDCMPLT interrupt for a completed * command. */ INT_COALESCING_TIMER { diff --git a/drivers/scsi/aic7xxx/aic79xx.seq b/drivers/scsi/aic7xxx/aic79xx.seq index 2fb78e35a9e..3a36d9362a1 100644 --- a/drivers/scsi/aic7xxx/aic79xx.seq +++ b/drivers/scsi/aic7xxx/aic79xx.seq @@ -567,7 +567,7 @@ BEGIN_CRITICAL; shr SELOID, 4, SCB_SCSIID; /* * If we want to send a message to the device, ensure - * we are selecting with atn irregardless of our packetized + * we are selecting with atn regardless of our packetized * agreement. Since SPI4 only allows target reset or PPR * messages if this is a packetized connection, the change * to our negotiation table entry for this selection will @@ -960,7 +960,7 @@ p_status_okay: * This is done to allow the host to send messages outside of an identify * sequence while protecting the seqencer from testing the MK_MESSAGE bit * on an SCB that might not be for the current nexus. (For example, a - * BDR message in responce to a bad reselection would leave us pointed to + * BDR message in response to a bad reselection would leave us pointed to * an SCB that doesn't have anything to do with the current target). * * Otherwise, treat MSG_OUT as a 1 byte message to send (abort, abort tag, @@ -1507,7 +1507,7 @@ service_fifo: * If the other FIFO needs loading, then it * must not have claimed the S/G cache yet * (SG_CACHE_AVAIL would have been cleared in - * the orginal FIFO mode and we test this above). + * the original FIFO mode and we test this above). * Return to the idle loop so we can process the * FIFO not currently on the bus first. */ @@ -1521,7 +1521,7 @@ idle_sgfetch_okay: idle_sgfetch_start: /* * We fetch a "cacheline aligned" and sized amount of data - * so we don't end up referencing a non-existant page. + * so we don't end up referencing a non-existent page. * Cacheline aligned is in quotes because the kernel will * set the prefetch amount to a reasonable level if the * cacheline size is unknown. @@ -1551,7 +1551,7 @@ idle_sg_avail: test DFSTATUS, PRELOAD_AVAIL jz return; /* * On the A, preloading a segment before HDMAENACK - * comes true can clobber the shaddow address of the + * comes true can clobber the shadow address of the * first segment in the S/G FIFO. Wait until it is * safe to proceed. */ @@ -2004,10 +2004,10 @@ pkt_handle_xfer: * Defer handling of this NONPACKREQ until we * can be sure it pertains to this FIFO. SAVEPTRS * will not be asserted if the NONPACKREQ is for us, - * so we must simulate it if shaddow is valid. If - * shaddow is not valid, keep running this FIFO until we + * so we must simulate it if shadow is valid. If + * shadow is not valid, keep running this FIFO until we * have satisfied the transfer by loading segments and - * waiting for either shaddow valid or last_seg_done. + * waiting for either shadow valid or last_seg_done. */ test MDFFSTAT, SHVALID jnz pkt_saveptrs; pkt_service_fifo: @@ -2171,7 +2171,7 @@ pkt_status_check_nonpackreq: /* * The unexpected nonpkt phase handler assumes that any * data channel use will have a FIFO reference count. It - * turns out that the status handler doesn't need a refernce + * turns out that the status handler doesn't need a references * count since the status received flag, and thus completion * processing, cannot be set until the handler is finished. * We increment the count here to make the nonpkt handler diff --git a/drivers/scsi/aic7xxx/aic79xx_core.c b/drivers/scsi/aic7xxx/aic79xx_core.c index 3233bf56443..5f8617dd43b 100644 --- a/drivers/scsi/aic7xxx/aic79xx_core.c +++ b/drivers/scsi/aic7xxx/aic79xx_core.c @@ -562,7 +562,7 @@ ahd_targetcmd_offset(struct ahd_softc *ahd, u_int index) } #endif -/*********************** Miscelaneous Support Functions ***********************/ +/*********************** Miscellaneous Support Functions ***********************/ /* * Return pointers to the transfer negotiation information * for the specified our_id/remote_id pair. @@ -599,7 +599,7 @@ void ahd_outw(struct ahd_softc *ahd, u_int port, u_int value) { /* - * Write low byte first to accomodate registers + * Write low byte first to accommodate registers * such as PRGMCNT where the order maters. */ ahd_outb(ahd, port, value & 0xFF); @@ -2067,7 +2067,7 @@ ahd_handle_seqint(struct ahd_softc *ahd, u_int intstat) * that requires host assistance for completion. * While handling the message phase(s), we will be * notified by the sequencer after each byte is - * transfered so we can track bus phase changes. + * transferred so we can track bus phase changes. * * If this is the first time we've seen a HOST_MSG_LOOP * interrupt, initialize the state of the host message @@ -2487,7 +2487,7 @@ ahd_handle_scsiint(struct ahd_softc *ahd, u_int intstat) /* * Although the driver does not care about the * 'Selection in Progress' status bit, the busy - * LED does. SELINGO is only cleared by a successfull + * LED does. SELINGO is only cleared by a successful * selection, so we must manually clear it to insure * the LED turns off just incase no future successful * selections occur (e.g. no devices on the bus). @@ -3548,7 +3548,7 @@ ahd_clear_critical_section(struct ahd_softc *ahd) ahd_outb(ahd, SEQCTL0, ahd_inb(ahd, SEQCTL0) & ~STEP); ahd_outb(ahd, SIMODE1, simode1); /* - * SCSIINT seems to glitch occassionally when + * SCSIINT seems to glitch occasionally when * the interrupt masks are restored. Clear SCSIINT * one more time so that only persistent errors * are seen as a real interrupt. @@ -3838,7 +3838,7 @@ ahd_validate_width(struct ahd_softc *ahd, struct ahd_initiator_tinfo *tinfo, /* * Update the bitmask of targets for which the controller should - * negotiate with at the next convenient oportunity. This currently + * negotiate with at the next convenient opportunity. This currently * means the next time we send the initial identify messages for * a new transaction. */ @@ -4200,7 +4200,7 @@ ahd_update_neg_table(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, /* * During packetized transfers, the target will - * give us the oportunity to send command packets + * give us the opportunity to send command packets * without us asserting attention. */ if ((tinfo->ppr_options & MSG_EXT_PPR_IU_REQ) == 0) @@ -5651,7 +5651,7 @@ ahd_handle_msg_reject(struct ahd_softc *ahd, struct ahd_devinfo *devinfo) /* * Requeue all tagged commands for this target - * currently in our posession so they can be + * currently in our possession so they can be * converted to untagged commands. */ ahd_search_qinfifo(ahd, SCB_GET_TARGET(ahd, scb), @@ -6245,7 +6245,7 @@ ahd_shutdown(void *arg) /* * Reset the controller and record some information about it * that is only available just after a reset. If "reinit" is - * non-zero, this reset occured after initial configuration + * non-zero, this reset occurred after initial configuration * and the caller requests that the chip be fully reinitialized * to a runable state. Chip interrupts are *not* enabled after * a reinitialization. The caller must enable interrupts via @@ -6495,7 +6495,7 @@ ahd_init_scbdata(struct ahd_softc *ahd) } /* - * Note that we were successfull + * Note that we were successful */ return (0); @@ -7079,7 +7079,7 @@ ahd_init(struct ahd_softc *ahd) return (ENOMEM); /* - * Verify that the compiler hasn't over-agressively + * Verify that the compiler hasn't over-aggressively * padded important structures. */ if (sizeof(struct hardware_scb) != 64) @@ -10087,7 +10087,7 @@ ahd_write_seeprom(struct ahd_softc *ahd, uint16_t *buf, return (error); /* - * Write the data. If we don't get throught the loop at + * Write the data. If we don't get through the loop at * least once, the arguments were invalid. */ retval = EINVAL; diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.c b/drivers/scsi/aic7xxx/aic79xx_osm.c index 25d06662447..7d48700257a 100644 --- a/drivers/scsi/aic7xxx/aic79xx_osm.c +++ b/drivers/scsi/aic7xxx/aic79xx_osm.c @@ -1441,7 +1441,7 @@ ahd_platform_set_tags(struct ahd_softc *ahd, struct scsi_device *sdev, usertags = ahd_linux_user_tagdepth(ahd, devinfo); if (!was_queuing) { /* - * Start out agressively and allow our + * Start out aggressively and allow our * dynamic queue depth algorithm to take * care of the rest. */ diff --git a/drivers/scsi/aic7xxx/aic7xxx.h b/drivers/scsi/aic7xxx/aic7xxx.h index 17444bc18bc..f695774645c 100644 --- a/drivers/scsi/aic7xxx/aic7xxx.h +++ b/drivers/scsi/aic7xxx/aic7xxx.h @@ -440,7 +440,7 @@ struct hardware_scb { * o A residual has occurred if SG_FULL_RESID is set in sgptr, * or residual_sgptr does not have SG_LIST_NULL set. * - * o We are transfering the last segment if residual_datacnt has + * o We are transferring the last segment if residual_datacnt has * the SG_LAST_SEG flag set. * * Host: @@ -494,7 +494,7 @@ struct hardware_scb { */ /* - * Definition of a scatter/gather element as transfered to the controller. + * Definition of a scatter/gather element as transferred to the controller. * The aic7xxx chips only support a 24bit length. We use the top byte of * the length to store additional address bits and a flag to indicate * that a given segment terminates the transfer. This gives us an diff --git a/drivers/scsi/aic7xxx/aic7xxx.reg b/drivers/scsi/aic7xxx/aic7xxx.reg index 9a96e55da39..ba0b411d03e 100644 --- a/drivers/scsi/aic7xxx/aic7xxx.reg +++ b/drivers/scsi/aic7xxx/aic7xxx.reg @@ -351,7 +351,7 @@ register SSTAT2 { address 0x00d access_mode RO field OVERRUN 0x80 - field SHVALID 0x40 /* Shaddow Layer non-zero */ + field SHVALID 0x40 /* Shadow Layer non-zero */ field EXP_ACTIVE 0x10 /* SCSI Expander Active */ field CRCVALERR 0x08 /* CRC doesn't match (U3 only) */ field CRCENDERR 0x04 /* No terminal CRC packet (U3 only) */ diff --git a/drivers/scsi/aic7xxx/aic7xxx.seq b/drivers/scsi/aic7xxx/aic7xxx.seq index 5a4cfc954a9..e60041e8f2d 100644 --- a/drivers/scsi/aic7xxx/aic7xxx.seq +++ b/drivers/scsi/aic7xxx/aic7xxx.seq @@ -57,10 +57,10 @@ PREFIX = "ahc_" * a later time. This problem cannot be resolved by holding a single entry * in scratch ram since a reconnecting target can request sense and this will * create yet another SCB waiting for selection. The solution used here is to - * use byte 27 of the SCB as a psuedo-next pointer and to thread a list + * use byte 27 of the SCB as a pseudo-next pointer and to thread a list * of SCBs that are awaiting selection. Since 0-0xfe are valid SCB indexes, * SCB_LIST_NULL is 0xff which is out of range. An entry is also added to - * this list everytime a request sense occurs or after completing a non-tagged + * this list every time a request sense occurs or after completing a non-tagged * command for which a second SCB has been queued. The sequencer will * automatically consume the entries. */ @@ -752,7 +752,7 @@ idle_loop: /* * We fetch a "cacheline aligned" and sized amount of data - * so we don't end up referencing a non-existant page. + * so we don't end up referencing a non-existent page. * Cacheline aligned is in quotes because the kernel will * set the prefetch amount to a reasonable level if the * cacheline size is unknown. @@ -1485,7 +1485,7 @@ p_status_okay: * This is done to allow the host to send messages outside of an identify * sequence while protecting the seqencer from testing the MK_MESSAGE bit * on an SCB that might not be for the current nexus. (For example, a - * BDR message in responce to a bad reselection would leave us pointed to + * BDR message in response to a bad reselection would leave us pointed to * an SCB that doesn't have anything to do with the current target). * * Otherwise, treat MSG_OUT as a 1 byte message to send (abort, abort tag, @@ -1999,7 +1999,7 @@ if ((ahc->flags & AHC_TARGETROLE) != 0) { * from out to in, wait an additional data release delay before continuing. */ change_phase: - /* Wait for preceeding I/O session to complete. */ + /* Wait for preceding I/O session to complete. */ test SCSISIGI, ACKI jnz .; /* Change the phase */ diff --git a/drivers/scsi/aic7xxx/aic7xxx_core.c b/drivers/scsi/aic7xxx/aic7xxx_core.c index e021b4812d5..dc28b0a91b2 100644 --- a/drivers/scsi/aic7xxx/aic7xxx_core.c +++ b/drivers/scsi/aic7xxx/aic7xxx_core.c @@ -427,7 +427,7 @@ ahc_targetcmd_offset(struct ahc_softc *ahc, u_int index) } #endif -/*********************** Miscelaneous Support Functions ***********************/ +/*********************** Miscellaneous Support Functions ***********************/ /* * Determine whether the sequencer reported a residual * for this SCB/transaction. @@ -1243,7 +1243,7 @@ ahc_handle_seqint(struct ahc_softc *ahc, u_int intstat) * that requires host assistance for completion. * While handling the message phase(s), we will be * notified by the sequencer after each byte is - * transfered so we can track bus phase changes. + * transferred so we can track bus phase changes. * * If this is the first time we've seen a HOST_MSG_LOOP * interrupt, initialize the state of the host message @@ -1487,7 +1487,7 @@ ahc_handle_seqint(struct ahc_softc *ahc, u_int intstat) scbptr, ahc_inb(ahc, ARG_1), ahc->scb_data->hscbs[scbptr].tag); ahc_dump_card_state(ahc); - panic("for saftey"); + panic("for safety"); break; } case OUT_OF_RANGE: @@ -1733,7 +1733,7 @@ ahc_handle_scsiint(struct ahc_softc *ahc, u_int intstat) /* * Although the driver does not care about the * 'Selection in Progress' status bit, the busy - * LED does. SELINGO is only cleared by a successfull + * LED does. SELINGO is only cleared by a successful * selection, so we must manually clear it to insure * the LED turns off just incase no future successful * selections occur (e.g. no devices on the bus). @@ -1943,7 +1943,7 @@ ahc_handle_scsiint(struct ahc_softc *ahc, u_int intstat) if (lastphase != P_BUSFREE) { /* * Renegotiate with this device at the - * next oportunity just in case this busfree + * next opportunity just in case this busfree * is due to a negotiation mismatch with the * device. */ @@ -2442,7 +2442,7 @@ ahc_validate_width(struct ahc_softc *ahc, struct ahc_initiator_tinfo *tinfo, /* * Update the bitmask of targets for which the controller should - * negotiate with at the next convenient oportunity. This currently + * negotiate with at the next convenient opportunity. This currently * means the next time we send the initial identify messages for * a new transaction. */ @@ -4131,7 +4131,7 @@ ahc_handle_msg_reject(struct ahc_softc *ahc, struct ahc_devinfo *devinfo) /* * Requeue all tagged commands for this target - * currently in our posession so they can be + * currently in our possession so they can be * converted to untagged commands. */ ahc_search_qinfifo(ahc, SCB_GET_TARGET(ahc, scb), @@ -4581,7 +4581,7 @@ ahc_shutdown(void *arg) /* * Reset the controller and record some information about it * that is only available just after a reset. If "reinit" is - * non-zero, this reset occured after initial configuration + * non-zero, this reset occurred after initial configuration * and the caller requests that the chip be fully reinitialized * to a runable state. Chip interrupts are *not* enabled after * a reinitialization. The caller must enable interrupts via @@ -4899,7 +4899,7 @@ ahc_init_scbdata(struct ahc_softc *ahc) ahc->next_queued_scb = ahc_get_scb(ahc); /* - * Note that we were successfull + * Note that we were successful */ return (0); diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm.c b/drivers/scsi/aic7xxx/aic7xxx_osm.c index 4a359bb307c..c6251bb4f43 100644 --- a/drivers/scsi/aic7xxx/aic7xxx_osm.c +++ b/drivers/scsi/aic7xxx/aic7xxx_osm.c @@ -294,7 +294,7 @@ static uint32_t aic7xxx_extended; * dubious at best. To my knowledge, this option has never actually * solved a PCI parity problem, but on certain machines with broken PCI * chipset configurations where stray PCI transactions with bad parity are - * the norm rather than the exception, the error messages can be overwelming. + * the norm rather than the exception, the error messages can be overwhelming. * It's included in the driver for completeness. * 0 = Shut off PCI parity check * non-0 = reverse polarity pci parity checking @@ -1318,7 +1318,7 @@ ahc_platform_set_tags(struct ahc_softc *ahc, struct scsi_device *sdev, usertags = ahc_linux_user_tagdepth(ahc, devinfo); if (!was_queuing) { /* - * Start out agressively and allow our + * Start out aggressively and allow our * dynamic queue depth algorithm to take * care of the rest. */ diff --git a/drivers/scsi/aic7xxx/aic7xxx_pci.c b/drivers/scsi/aic7xxx/aic7xxx_pci.c index 2b11a427236..6917b4f5ac9 100644 --- a/drivers/scsi/aic7xxx/aic7xxx_pci.c +++ b/drivers/scsi/aic7xxx/aic7xxx_pci.c @@ -789,7 +789,7 @@ ahc_pci_config(struct ahc_softc *ahc, const struct ahc_pci_identity *entry) ahc->bus_intr = ahc_pci_intr; ahc->bus_chip_init = ahc_pci_chip_init; - /* Remeber how the card was setup in case there is no SEEPROM */ + /* Remember how the card was setup in case there is no SEEPROM */ if ((ahc_inb(ahc, HCNTRL) & POWRDN) == 0) { ahc_pause(ahc); if ((ahc->features & AHC_ULTRA2) != 0) @@ -860,7 +860,7 @@ ahc_pci_config(struct ahc_softc *ahc, const struct ahc_pci_identity *entry) } /* - * We cannot perform ULTRA speeds without the presense + * We cannot perform ULTRA speeds without the presence * of the external precision resistor. */ if ((ahc->features & AHC_ULTRA) != 0) { @@ -969,7 +969,7 @@ ahc_pci_config(struct ahc_softc *ahc, const struct ahc_pci_identity *entry) } /* - * Test for the presense of external sram in an + * Test for the presence of external sram in an * "unshared" configuration. */ static int diff --git a/drivers/scsi/aic7xxx/aicasm/aicasm_gram.y b/drivers/scsi/aic7xxx/aicasm/aicasm_gram.y index e4064433842..f1586a43790 100644 --- a/drivers/scsi/aic7xxx/aicasm/aicasm_gram.y +++ b/drivers/scsi/aic7xxx/aicasm/aicasm_gram.y @@ -803,7 +803,7 @@ macro_arglist: | macro_arglist ',' T_ARG { if ($1 == 0) { - stop("Comma without preceeding argument in arg list", + stop("Comma without preceding argument in arg list", EX_DATAERR); /* NOTREACHED */ } @@ -1319,8 +1319,8 @@ code: ; /* - * This grammer differs from the one in the aic7xxx - * reference manual since the grammer listed there is + * This grammar differs from the one in the aic7xxx + * reference manual since the grammar listed there is * ambiguous and causes a shift/reduce conflict. * It also seems more logical as the "immediate" * argument is listed as the second arg like the @@ -1799,7 +1799,7 @@ format_3_instr(int opcode, symbol_ref_t *src, instr = seq_alloc(); f3_instr = &instr->format.format3; if (address->symbol == NULL) { - /* 'dot' referrence. Use the current instruction pointer */ + /* 'dot' reference. Use the current instruction pointer */ addr = instruction_ptr + address->offset; } else if (address->symbol->type == UNINITIALIZED) { /* forward reference */ diff --git a/drivers/scsi/aic7xxx/aicasm/aicasm_macro_gram.y b/drivers/scsi/aic7xxx/aicasm/aicasm_macro_gram.y index ff46aa6801b..708326df076 100644 --- a/drivers/scsi/aic7xxx/aicasm/aicasm_macro_gram.y +++ b/drivers/scsi/aic7xxx/aicasm/aicasm_macro_gram.y @@ -115,7 +115,7 @@ macro_arglist: | macro_arglist ',' T_ARG { if ($1 == 0) { - stop("Comma without preceeding argument in arg list", + stop("Comma without preceding argument in arg list", EX_DATAERR); /* NOTREACHED */ } diff --git a/drivers/scsi/aic7xxx_old.c b/drivers/scsi/aic7xxx_old.c index 4ff60a08df0..5b212f0df89 100644 --- a/drivers/scsi/aic7xxx_old.c +++ b/drivers/scsi/aic7xxx_old.c @@ -905,7 +905,7 @@ struct aic_dev_data { * problems with architectures I can't test on (because I don't have one, * such as the Alpha based systems) which happen to give faults for * non-aligned memory accesses, care was taken to align this structure - * in a way that gauranteed all accesses larger than 8 bits were aligned + * in a way that guaranteed all accesses larger than 8 bits were aligned * on the appropriate boundary. It's also organized to try and be more * cache line efficient. Be careful when changing this lest you might hurt * overall performance and bring down the wrath of the masses. @@ -1180,7 +1180,7 @@ static int aic7xxx_pci_parity = 0; * the card's registers in a hex dump format tailored to each model of * controller. * - * NOTE: THE CONTROLLER IS LEFT IN AN UNUSEABLE STATE BY THIS OPTION. + * NOTE: THE CONTROLLER IS LEFT IN AN UNUSABLE STATE BY THIS OPTION. * YOU CANNOT BOOT UP WITH THIS OPTION, IT IS FOR DEBUGGING PURPOSES * ONLY */ @@ -3467,7 +3467,7 @@ aic7xxx_reset_current_bus(struct aic7xxx_host *p) /* Turn off the bus' current operations, after all, we shouldn't have any * valid commands left to cause a RSELI and SELO once we've tossed the * bus away with this reset, so we might as well shut down the sequencer - * until the bus is restarted as oppossed to saving the current settings + * until the bus is restarted as opposed to saving the current settings * and restoring them (which makes no sense to me). */ /* Turn on the bus reset. */ @@ -4070,7 +4070,7 @@ aic7xxx_handle_seqint(struct aic7xxx_host *p, unsigned char intstat) aic_dev->max_q_depth = aic_dev->temp_q_depth = 1; /* * We set this command up as a bus device reset. However, we have - * to clear the tag type as it's causing us problems. We shouldnt + * to clear the tag type as it's causing us problems. We shouldn't * have to worry about any other commands being active, since if * the device is refusing tagged commands, this should be the * first tagged command sent to the device, however, we do have @@ -9748,7 +9748,7 @@ skip_pci_controller: } /* - * We are commited now, everything has been checked and this card + * We are committed now, everything has been checked and this card * has been found, now we just set it up */ @@ -9906,7 +9906,7 @@ skip_pci_controller: * 2: All PCI controllers with BIOS_ENABLED next, according to BIOS * address, going from lowest to highest. * 3: Remaining VLB/EISA controllers going in slot order. - * 4: Remaining PCI controllers, going in PCI device order (reversable) + * 4: Remaining PCI controllers, going in PCI device order (reversible) */ { diff --git a/drivers/scsi/aic7xxx_old/aic7xxx.seq b/drivers/scsi/aic7xxx_old/aic7xxx.seq index 1565be9ebd4..823ff287322 100644 --- a/drivers/scsi/aic7xxx_old/aic7xxx.seq +++ b/drivers/scsi/aic7xxx_old/aic7xxx.seq @@ -51,7 +51,7 @@ * use byte 27 of the SCB as a pseudo-next pointer and to thread a list * of SCBs that are awaiting selection. Since 0-0xfe are valid SCB indexes, * SCB_LIST_NULL is 0xff which is out of range. An entry is also added to - * this list everytime a request sense occurs or after completing a non-tagged + * this list every time a request sense occurs or after completing a non-tagged * command for which a second SCB has been queued. The sequencer will * automatically consume the entries. */ @@ -696,7 +696,7 @@ p_status: * This is done to allow the hsot to send messages outside of an identify * sequence while protecting the seqencer from testing the MK_MESSAGE bit * on an SCB that might not be for the current nexus. (For example, a - * BDR message in responce to a bad reselection would leave us pointed to + * BDR message in response to a bad reselection would leave us pointed to * an SCB that doesn't have anything to do with the current target). * Otherwise, treat MSG_OUT as a 1 byte message to send (abort, abort tag, * bus device reset). @@ -716,8 +716,8 @@ p_mesgout_identify: } else { and SINDEX,0x7,SCB_TCL; /* lun */ } - and A,DISCENB,SCB_CONTROL; /* mask off disconnect privledge */ - or SINDEX,A; /* or in disconnect privledge */ + and A,DISCENB,SCB_CONTROL; /* mask off disconnect privilege */ + or SINDEX,A; /* or in disconnect privilege */ or SINDEX,MSG_IDENTIFYFLAG; p_mesgout_mk_message: test SCB_CONTROL,MK_MESSAGE jz p_mesgout_tag; diff --git a/drivers/scsi/aic94xx/aic94xx_reg_def.h b/drivers/scsi/aic94xx/aic94xx_reg_def.h index 40273a747d2..dd6cc8008b1 100644 --- a/drivers/scsi/aic94xx/aic94xx_reg_def.h +++ b/drivers/scsi/aic94xx/aic94xx_reg_def.h @@ -2134,7 +2134,7 @@ * The host accesses this scratch in a different manner from the * link sequencer. The sequencer has to use LSEQ registers * LmSCRPAGE and LmMnSCRPAGE to access the scratch memory. A flat -* mapping of the scratch memory is avaliable for software +* mapping of the scratch memory is available for software * convenience and to prevent corruption while the sequencer is * running. This memory is mapped onto addresses 800h - 9FFh. * diff --git a/drivers/scsi/arm/acornscsi.c b/drivers/scsi/arm/acornscsi.c index ec166726b31..c454e44cf51 100644 --- a/drivers/scsi/arm/acornscsi.c +++ b/drivers/scsi/arm/acornscsi.c @@ -100,7 +100,7 @@ */ #define TIMEOUT_TIME 10 /* - * Define this if you want to have verbose explaination of SCSI + * Define this if you want to have verbose explanation of SCSI * status/messages. */ #undef CONFIG_ACORNSCSI_CONSTANTS @@ -1561,7 +1561,7 @@ void acornscsi_message(AS_Host *host) /* * If we were negociating sync transfer, we don't yet know if * this REJECT is for the sync transfer or for the tagged queue/wide - * transfer. Re-initiate sync transfer negociation now, and if + * transfer. Re-initiate sync transfer negotiation now, and if * we got a REJECT in response to SDTR, then it'll be set to DONE. */ if (host->device[host->SCpnt->device->id].sync_state == SYNC_SENT_REQUEST) diff --git a/drivers/scsi/arm/acornscsi.h b/drivers/scsi/arm/acornscsi.h index 8d2172a0b35..01bc715a3ae 100644 --- a/drivers/scsi/arm/acornscsi.h +++ b/drivers/scsi/arm/acornscsi.h @@ -223,8 +223,8 @@ typedef enum { * Synchronous transfer state */ typedef enum { /* Synchronous transfer state */ - SYNC_ASYNCHRONOUS, /* don't negociate synchronous transfers*/ - SYNC_NEGOCIATE, /* start negociation */ + SYNC_ASYNCHRONOUS, /* don't negotiate synchronous transfers*/ + SYNC_NEGOCIATE, /* start negotiation */ SYNC_SENT_REQUEST, /* sent SDTR message */ SYNC_COMPLETED, /* received SDTR reply */ } syncxfer_t; @@ -322,7 +322,7 @@ typedef struct acornscsi_hostdata { /* per-device info */ struct { unsigned char sync_xfer; /* synchronous transfer (SBIC value) */ - syncxfer_t sync_state; /* sync xfer negociation state */ + syncxfer_t sync_state; /* sync xfer negotiation state */ unsigned char disconnect_ok:1; /* device can disconnect */ } device[8]; unsigned long busyluns[64 / sizeof(unsigned long)];/* array of bits indicating LUNs busy */ diff --git a/drivers/scsi/arm/arxescsi.c b/drivers/scsi/arm/arxescsi.c index 2836fe248df..a750aa72b8e 100644 --- a/drivers/scsi/arm/arxescsi.c +++ b/drivers/scsi/arm/arxescsi.c @@ -228,7 +228,7 @@ static const char *arxescsi_info(struct Scsi_Host *host) * Params : buffer - a buffer to write information to * start - a pointer into this buffer set by this routine to the start * of the required information. - * offset - offset into information that we have read upto. + * offset - offset into information that we have read up to. * length - length of buffer * host_no - host number to return information for * inout - 0 for reading, 1 for writing. diff --git a/drivers/scsi/arm/cumana_2.c b/drivers/scsi/arm/cumana_2.c index c9902b5c1f2..547987b8638 100644 --- a/drivers/scsi/arm/cumana_2.c +++ b/drivers/scsi/arm/cumana_2.c @@ -344,7 +344,7 @@ cumanascsi_2_set_proc_info(struct Scsi_Host *host, char *buffer, int length) * Params : buffer - a buffer to write information to * start - a pointer into this buffer set by this routine to the start * of the required information. - * offset - offset into information that we have read upto. + * offset - offset into information that we have read up to. * length - length of buffer * host_no - host number to return information for * inout - 0 for reading, 1 for writing. diff --git a/drivers/scsi/arm/eesox.c b/drivers/scsi/arm/eesox.c index d8435132f46..edfd12b48c2 100644 --- a/drivers/scsi/arm/eesox.c +++ b/drivers/scsi/arm/eesox.c @@ -429,7 +429,7 @@ eesoxscsi_set_proc_info(struct Scsi_Host *host, char *buffer, int length) * Params : buffer - a buffer to write information to * start - a pointer into this buffer set by this routine to the start * of the required information. - * offset - offset into information that we have read upto. + * offset - offset into information that we have read up to. * length - length of buffer * host_no - host number to return information for * inout - 0 for reading, 1 for writing. diff --git a/drivers/scsi/arm/fas216.c b/drivers/scsi/arm/fas216.c index 2b2ce21e227..e85c40b6e19 100644 --- a/drivers/scsi/arm/fas216.c +++ b/drivers/scsi/arm/fas216.c @@ -2119,7 +2119,7 @@ request_sense: * executed, unless a target connects to us. */ if (info->reqSCpnt) - printk(KERN_WARNING "scsi%d.%c: loosing request command\n", + printk(KERN_WARNING "scsi%d.%c: losing request command\n", info->host->host_no, '0' + SCpnt->device->id); info->reqSCpnt = SCpnt; } @@ -2294,7 +2294,7 @@ static int fas216_noqueue_command_lck(struct scsi_cmnd *SCpnt, * If we don't have an IRQ, then we must poll the card for * it's interrupt, and use that to call this driver's * interrupt routine. That way, we keep the command - * progressing. Maybe we can add some inteligence here + * progressing. Maybe we can add some intelligence here * and go to sleep if we know that the device is going * to be some time (eg, disconnected). */ diff --git a/drivers/scsi/arm/fas216.h b/drivers/scsi/arm/fas216.h index f30f8d659dc..84b7127c012 100644 --- a/drivers/scsi/arm/fas216.h +++ b/drivers/scsi/arm/fas216.h @@ -203,11 +203,11 @@ typedef enum { } fasdmatype_t; typedef enum { - neg_wait, /* Negociate with device */ - neg_inprogress, /* Negociation sent */ - neg_complete, /* Negociation complete */ - neg_targcomplete, /* Target completed negociation */ - neg_invalid /* Negociation not supported */ + neg_wait, /* Negotiate with device */ + neg_inprogress, /* Negotiation sent */ + neg_complete, /* Negotiation complete */ + neg_targcomplete, /* Target completed negotiation */ + neg_invalid /* Negotiation not supported */ } neg_t; #define MAGIC 0x441296bdUL diff --git a/drivers/scsi/arm/powertec.c b/drivers/scsi/arm/powertec.c index e2297b4c1b9..9274c0677b9 100644 --- a/drivers/scsi/arm/powertec.c +++ b/drivers/scsi/arm/powertec.c @@ -232,7 +232,7 @@ powertecscsi_set_proc_info(struct Scsi_Host *host, char *buffer, int length) * Params : buffer - a buffer to write information to * start - a pointer into this buffer set by this routine to the start * of the required information. - * offset - offset into information that we have read upto. + * offset - offset into information that we have read up to. * length - length of buffer * inout - 0 for reading, 1 for writing. * Returns : length of data written to buffer. diff --git a/drivers/scsi/atari_NCR5380.c b/drivers/scsi/atari_NCR5380.c index 88b2928b4d3..ea439f93ed8 100644 --- a/drivers/scsi/atari_NCR5380.c +++ b/drivers/scsi/atari_NCR5380.c @@ -464,7 +464,7 @@ static void free_all_tags(void) * * Parameters: Scsi_Cmnd *cmd * The command to work on. The first scatter buffer's data are - * assumed to be already transfered into ptr/this_residual. + * assumed to be already transferred into ptr/this_residual. */ static void merge_contiguous_buffers(Scsi_Cmnd *cmd) @@ -1720,7 +1720,7 @@ static int NCR5380_select(struct Scsi_Host *instance, Scsi_Cmnd *cmd, int tag) * bytes to transfer, **data - pointer to data pointer. * * Returns : -1 when different phase is entered without transferring - * maximum number of bytes, 0 if all bytes are transfered or exit + * maximum number of bytes, 0 if all bytes are transferred or exit * is in same phase. * * Also, *phase, *count, *data are modified in place. @@ -1911,7 +1911,7 @@ static int do_abort(struct Scsi_Host *host) * bytes to transfer, **data - pointer to data pointer. * * Returns : -1 when different phase is entered without transferring - * maximum number of bytes, 0 if all bytes or transfered or exit + * maximum number of bytes, 0 if all bytes or transferred or exit * is in same phase. * * Also, *phase, *count, *data are modified in place. diff --git a/drivers/scsi/atp870u.c b/drivers/scsi/atp870u.c index 76029d570be..7e6eca4a125 100644 --- a/drivers/scsi/atp870u.c +++ b/drivers/scsi/atp870u.c @@ -1228,7 +1228,7 @@ TCM_5: /* isolation complete.. */ printk(" \n%x %x %x %s\n ",assignid_map,mbuf[0],mbuf[1],&mbuf[2]); */ i = 15; j = mbuf[0]; - if ((j & 0x20) != 0) { /* bit5=1:ID upto 7 */ + if ((j & 0x20) != 0) { /* bit5=1:ID up to 7 */ i = 7; } if ((j & 0x06) == 0) { /* IDvalid? */ diff --git a/drivers/scsi/be2iscsi/be_cmds.h b/drivers/scsi/be2iscsi/be_cmds.h index 5218de4ab35..fbd1dc2c15f 100644 --- a/drivers/scsi/be2iscsi/be_cmds.h +++ b/drivers/scsi/be2iscsi/be_cmds.h @@ -877,7 +877,7 @@ struct be_all_if_id { */ #define CXN_KILLED_PDU_SIZE_EXCEEDS_DSL 3 /* Connection got invalidated * internally - * due to a recieved PDU + * due to a received PDU * size > DSL */ #define CXN_KILLED_BURST_LEN_MISMATCH 4 /* Connection got invalidated @@ -886,7 +886,7 @@ struct be_all_if_id { * FBL/MBL. */ #define CXN_KILLED_AHS_RCVD 5 /* Connection got invalidated - * internally due to a recieved + * internally due to a received * PDU Hdr that has * AHS */ #define CXN_KILLED_HDR_DIGEST_ERR 6 /* Connection got invalidated @@ -899,12 +899,12 @@ struct be_all_if_id { * pdu hdr */ #define CXN_KILLED_STALE_ITT_TTT_RCVD 8 /* Connection got invalidated - * internally due to a recieved + * internally due to a received * ITT/TTT that does not belong * to this Connection */ #define CXN_KILLED_INVALID_ITT_TTT_RCVD 9 /* Connection got invalidated - * internally due to recieved + * internally due to received * ITT/TTT value > Max * Supported ITTs/TTTs */ @@ -936,21 +936,21 @@ struct be_all_if_id { * index. */ #define CXN_KILLED_OVER_RUN_RESIDUAL 16 /* Command got invalidated - * internally due to recived + * internally due to received * command has residual * over run bytes. */ #define CXN_KILLED_UNDER_RUN_RESIDUAL 17 /* Command got invalidated - * internally due to recived + * internally due to received * command has residual under * run bytes. */ #define CMD_KILLED_INVALID_STATSN_RCVD 18 /* Command got invalidated - * internally due to a recieved + * internally due to a received * PDU has an invalid StatusSN */ #define CMD_KILLED_INVALID_R2T_RCVD 19 /* Command got invalidated - * internally due to a recieved + * internally due to a received * an R2T with some invalid * fields in it */ @@ -973,7 +973,7 @@ struct be_all_if_id { */ #define CMD_CXN_KILLED_INVALID_DATASN_RCVD 24 /* Command got invalidated * internally due to a - * recieved PDU has an invalid + * received PDU has an invalid * DataSN */ #define CXN_INVALIDATE_NOTIFY 25 /* Connection invalidation diff --git a/drivers/scsi/bfa/bfa_core.c b/drivers/scsi/bfa/bfa_core.c index 1cd5c8b0618..91838c51fb7 100644 --- a/drivers/scsi/bfa/bfa_core.c +++ b/drivers/scsi/bfa/bfa_core.c @@ -355,7 +355,7 @@ bfa_msix_lpu_err(struct bfa_s *bfa, int vec) /* * ERR_PSS bit needs to be cleared as well in case * interrups are shared so driver's interrupt handler is - * still called eventhough it is already masked out. + * still called even though it is already masked out. */ curr_value = readl( bfa->ioc.ioc_regs.pss_err_status_reg); diff --git a/drivers/scsi/bfa/bfa_defs_svc.h b/drivers/scsi/bfa/bfa_defs_svc.h index 648c8417672..207f598877c 100644 --- a/drivers/scsi/bfa/bfa_defs_svc.h +++ b/drivers/scsi/bfa/bfa_defs_svc.h @@ -145,7 +145,7 @@ struct bfa_fw_io_stats_s { u32 ioh_data_oor_event; /* Data out of range */ u32 ioh_ro_ooo_event; /* Relative offset out of range */ u32 ioh_cpu_owned_event; /* IOH hit -iost owned by f/w */ - u32 ioh_unexp_frame_event; /* unexpected frame recieved + u32 ioh_unexp_frame_event; /* unexpected frame received * count */ u32 ioh_err_int; /* IOH error int during data-phase * for scsi write @@ -566,8 +566,8 @@ struct bfa_itnim_iostats_s { u32 input_reqs; /* Data in-bound requests */ u32 output_reqs; /* Data out-bound requests */ u32 io_comps; /* Total IO Completions */ - u32 wr_throughput; /* Write data transfered in bytes */ - u32 rd_throughput; /* Read data transfered in bytes */ + u32 wr_throughput; /* Write data transferred in bytes */ + u32 rd_throughput; /* Read data transferred in bytes */ u32 iocomp_ok; /* Slowpath IO completions */ u32 iocomp_underrun; /* IO underrun */ diff --git a/drivers/scsi/bfa/bfa_fc.h b/drivers/scsi/bfa/bfa_fc.h index 8e764fae8dc..bf0067e0fd0 100644 --- a/drivers/scsi/bfa/bfa_fc.h +++ b/drivers/scsi/bfa/bfa_fc.h @@ -315,7 +315,7 @@ struct fc_plogi_csp_s { query_dbc:1, hg_supp:1; #endif - __be16 rxsz; /* recieve data_field size */ + __be16 rxsz; /* receive data_field size */ __be16 conseq; __be16 ro_bitmap; __be32 e_d_tov; diff --git a/drivers/scsi/bfa/bfa_fcs.c b/drivers/scsi/bfa/bfa_fcs.c index f674f931862..9b43ca4b677 100644 --- a/drivers/scsi/bfa/bfa_fcs.c +++ b/drivers/scsi/bfa/bfa_fcs.c @@ -1033,7 +1033,7 @@ bfa_fcs_fabric_delvport(struct bfa_fcs_fabric_s *fabric, /* - * Lookup for a vport withing a fabric given its pwwn + * Lookup for a vport within a fabric given its pwwn */ struct bfa_fcs_vport_s * bfa_fcs_fabric_vport_lookup(struct bfa_fcs_fabric_s *fabric, wwn_t pwwn) diff --git a/drivers/scsi/bfa/bfa_fcs.h b/drivers/scsi/bfa/bfa_fcs.h index 0fd63168573..61cdce4bd91 100644 --- a/drivers/scsi/bfa/bfa_fcs.h +++ b/drivers/scsi/bfa/bfa_fcs.h @@ -705,7 +705,7 @@ enum rport_event { RPSM_EVENT_ADDRESS_CHANGE = 15, /* Rport's PID has changed */ RPSM_EVENT_ADDRESS_DISC = 16, /* Need to Discover rport's PID */ RPSM_EVENT_PRLO_RCVD = 17, /* PRLO from remote device */ - RPSM_EVENT_PLOGI_RETRY = 18, /* Retry PLOGI continously */ + RPSM_EVENT_PLOGI_RETRY = 18, /* Retry PLOGI continuously */ }; /* diff --git a/drivers/scsi/bfa/bfa_fcs_lport.c b/drivers/scsi/bfa/bfa_fcs_lport.c index 43fa986bb58..1d6be8c1447 100644 --- a/drivers/scsi/bfa/bfa_fcs_lport.c +++ b/drivers/scsi/bfa/bfa_fcs_lport.c @@ -1149,7 +1149,7 @@ bfa_fcs_lport_fdmi_sm_offline(struct bfa_fcs_lport_fdmi_s *fdmi, } else { /* * For a base port, we should first register the HBA - * atribute. The HBA attribute also contains the base + * attribute. The HBA attribute also contains the base * port registration. */ bfa_sm_set_state(fdmi, diff --git a/drivers/scsi/bfa/bfa_svc.c b/drivers/scsi/bfa/bfa_svc.c index 1d34921f88b..16d9a5f61c1 100644 --- a/drivers/scsi/bfa/bfa_svc.c +++ b/drivers/scsi/bfa/bfa_svc.c @@ -1035,7 +1035,7 @@ bfa_fcxp_free(struct bfa_fcxp_s *fcxp) * @param[in] rport BFA rport pointer. Could be left NULL for WKA rports * @param[in] vf_id virtual Fabric ID * @param[in] lp_tag lport tag - * @param[in] cts use Continous sequence + * @param[in] cts use Continuous sequence * @param[in] cos fc Class of Service * @param[in] reqlen request length, does not include FCHS length * @param[in] fchs fc Header Pointer. The header content will be copied @@ -5022,7 +5022,7 @@ bfa_uf_start(struct bfa_s *bfa) } /* - * Register handler for all unsolicted recieve frames. + * Register handler for all unsolicted receive frames. * * @param[in] bfa BFA instance * @param[in] ufrecv receive handler function diff --git a/drivers/scsi/bfa/bfa_svc.h b/drivers/scsi/bfa/bfa_svc.h index 331ad992a58..5902a45c080 100644 --- a/drivers/scsi/bfa/bfa_svc.h +++ b/drivers/scsi/bfa/bfa_svc.h @@ -127,7 +127,7 @@ struct bfa_fcxp_req_info_s { * rport nexus is established */ struct fchs_s fchs; /* request FC header structure */ - u8 cts; /* continous sequence */ + u8 cts; /* continuous sequence */ u8 class; /* FC class for the request/response */ u16 max_frmsz; /* max send frame size */ u16 vf_id; /* vsan tag if applicable */ diff --git a/drivers/scsi/bfa/bfad.c b/drivers/scsi/bfa/bfad.c index 44524cf55d3..0fd510a0156 100644 --- a/drivers/scsi/bfa/bfad.c +++ b/drivers/scsi/bfa/bfad.c @@ -1278,7 +1278,7 @@ bfad_setup_intr(struct bfad_s *bfad) * interrupts into one vector, so even if we * can try to request less vectors, we don't * know how to associate interrupt events to - * vectors. Linux doesn't dupicate vectors + * vectors. Linux doesn't duplicate vectors * in the MSIX table for this case. */ diff --git a/drivers/scsi/bnx2fc/57xx_hsi_bnx2fc.h b/drivers/scsi/bnx2fc/57xx_hsi_bnx2fc.h index 69d031d9846..97a61b4d81b 100644 --- a/drivers/scsi/bnx2fc/57xx_hsi_bnx2fc.h +++ b/drivers/scsi/bnx2fc/57xx_hsi_bnx2fc.h @@ -898,7 +898,7 @@ struct fcoe_confqe { /* - * FCoE conection data base + * FCoE connection data base */ struct fcoe_conn_db { #if defined(__BIG_ENDIAN) diff --git a/drivers/scsi/bnx2fc/bnx2fc_els.c b/drivers/scsi/bnx2fc/bnx2fc_els.c index 7a11a255157..52c358427ce 100644 --- a/drivers/scsi/bnx2fc/bnx2fc_els.c +++ b/drivers/scsi/bnx2fc/bnx2fc_els.c @@ -397,7 +397,7 @@ void bnx2fc_process_els_compl(struct bnx2fc_cmd *els_req, &els_req->req_flags)) { BNX2FC_ELS_DBG("Timer context finished processing this " "els - 0x%x\n", els_req->xid); - /* This IO doesnt receive cleanup completion */ + /* This IO doesn't receive cleanup completion */ kref_put(&els_req->refcount, bnx2fc_cmd_release); return; } diff --git a/drivers/scsi/bnx2fc/bnx2fc_io.c b/drivers/scsi/bnx2fc/bnx2fc_io.c index d3fc302c241..1decefbf32e 100644 --- a/drivers/scsi/bnx2fc/bnx2fc_io.c +++ b/drivers/scsi/bnx2fc/bnx2fc_io.c @@ -1273,7 +1273,7 @@ static void bnx2fc_lun_reset_cmpl(struct bnx2fc_cmd *io_req) bnx2fc_cmd_release); /* timer hold */ rc = bnx2fc_initiate_abts(cmd); - /* abts shouldnt fail in this context */ + /* abts shouldn't fail in this context */ WARN_ON(rc != SUCCESS); } else printk(KERN_ERR PFX "lun_rst: abts already in" @@ -1308,7 +1308,7 @@ static void bnx2fc_tgt_reset_cmpl(struct bnx2fc_cmd *io_req) kref_put(&io_req->refcount, bnx2fc_cmd_release); /* timer hold */ rc = bnx2fc_initiate_abts(cmd); - /* abts shouldnt fail in this context */ + /* abts shouldn't fail in this context */ WARN_ON(rc != SUCCESS); } else diff --git a/drivers/scsi/bnx2fc/bnx2fc_tgt.c b/drivers/scsi/bnx2fc/bnx2fc_tgt.c index 7cc05e4e82d..a2e3830bd26 100644 --- a/drivers/scsi/bnx2fc/bnx2fc_tgt.c +++ b/drivers/scsi/bnx2fc/bnx2fc_tgt.c @@ -395,7 +395,7 @@ void bnx2fc_rport_event_handler(struct fc_lport *lport, rp = rport->dd_data; if (rport->port_id == FC_FID_DIR_SERV) { /* - * bnx2fc_rport structure doesnt exist for + * bnx2fc_rport structure doesn't exist for * directory server. * We should not come here, as lport will * take care of fabric login diff --git a/drivers/scsi/bnx2i/bnx2i_hwi.c b/drivers/scsi/bnx2i/bnx2i_hwi.c index 1da34c019b8..f0b89513fae 100644 --- a/drivers/scsi/bnx2i/bnx2i_hwi.c +++ b/drivers/scsi/bnx2i/bnx2i_hwi.c @@ -173,7 +173,7 @@ void bnx2i_arm_cq_event_coalescing(struct bnx2i_endpoint *ep, u8 action) /** * bnx2i_get_rq_buf - copy RQ buffer contents to driver buffer - * @conn: iscsi connection on which RQ event occured + * @conn: iscsi connection on which RQ event occurred * @ptr: driver buffer to which RQ buffer contents is to * be copied * @len: length of valid data inside RQ buf diff --git a/drivers/scsi/cxgbi/libcxgbi.h b/drivers/scsi/cxgbi/libcxgbi.h index 0a20fd5f710..9267844519c 100644 --- a/drivers/scsi/cxgbi/libcxgbi.h +++ b/drivers/scsi/cxgbi/libcxgbi.h @@ -262,9 +262,9 @@ struct cxgbi_skb_tx_cb { enum cxgbi_skcb_flags { SKCBF_TX_NEED_HDR, /* packet needs a header */ SKCBF_RX_COALESCED, /* received whole pdu */ - SKCBF_RX_HDR, /* recieved pdu header */ - SKCBF_RX_DATA, /* recieved pdu payload */ - SKCBF_RX_STATUS, /* recieved ddp status */ + SKCBF_RX_HDR, /* received pdu header */ + SKCBF_RX_DATA, /* received pdu payload */ + SKCBF_RX_STATUS, /* received ddp status */ SKCBF_RX_DATA_DDPD, /* pdu payload ddp'd */ SKCBF_RX_HCRC_ERR, /* header digest error */ SKCBF_RX_DCRC_ERR, /* data digest error */ diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c index b0f8523e665..b10b3841535 100644 --- a/drivers/scsi/dc395x.c +++ b/drivers/scsi/dc395x.c @@ -235,7 +235,7 @@ struct ScsiReqBlk { u8 sg_count; /* No of HW sg entries for this request */ u8 sg_index; /* Index of HW sg entry for this request */ - size_t total_xfer_length; /* Total number of bytes remaining to be transfered */ + size_t total_xfer_length; /* Total number of bytes remaining to be transferred */ size_t request_length; /* Total number of bytes in this request */ /* * The sense buffer handling function, request_sense, uses @@ -1774,7 +1774,7 @@ static void dc395x_handle_interrupt(struct AdapterCtlBlk *acb, dc395x_statev(acb, srb, &scsi_status); /* - * if there were any exception occured scsi_status + * if there were any exception occurred scsi_status * will be modify to bus free phase new scsi_status * transfer out from ... previous dc395x_statev */ @@ -1954,11 +1954,11 @@ static void sg_verify_length(struct ScsiReqBlk *srb) static void sg_update_list(struct ScsiReqBlk *srb, u32 left) { u8 idx; - u32 xferred = srb->total_xfer_length - left; /* bytes transfered */ + u32 xferred = srb->total_xfer_length - left; /* bytes transferred */ struct SGentry *psge = srb->segment_x + srb->sg_index; dprintkdbg(DBG_0, - "sg_update_list: Transfered %i of %i bytes, %i remain\n", + "sg_update_list: Transferred %i of %i bytes, %i remain\n", xferred, srb->total_xfer_length, left); if (xferred == 0) { /* nothing to update since we did not transfer any data */ @@ -1990,7 +1990,7 @@ static void sg_update_list(struct ScsiReqBlk *srb, u32 left) /* - * We have transfered a single byte (PIO mode?) and need to update + * We have transferred a single byte (PIO mode?) and need to update * the count of bytes remaining (total_xfer_length) and update the sg * entry to either point to next byte in the current sg entry, or of * already at the end to point to the start of the next sg entry @@ -2029,7 +2029,7 @@ static void cleanup_after_transfer(struct AdapterCtlBlk *acb, /* - * Those no of bytes will be transfered w/ PIO through the SCSI FIFO + * Those no of bytes will be transferred w/ PIO through the SCSI FIFO * Seems to be needed for unknown reasons; could be a hardware bug :-( */ #define DC395x_LASTPIO 4 @@ -2256,7 +2256,7 @@ static void data_in_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb, DC395x_read32(acb, TRM_S1040_DMA_CXCNT), srb->total_xfer_length, d_left_counter); #if DC395x_LASTPIO - /* KG: Less than or equal to 4 bytes can not be transfered via DMA, it seems. */ + /* KG: Less than or equal to 4 bytes can not be transferred via DMA, it seems. */ if (d_left_counter && srb->total_xfer_length <= DC395x_LASTPIO) { size_t left_io = srb->total_xfer_length; diff --git a/drivers/scsi/dc395x.h b/drivers/scsi/dc395x.h index b38360e5fe4..fbf35e37701 100644 --- a/drivers/scsi/dc395x.h +++ b/drivers/scsi/dc395x.h @@ -617,7 +617,7 @@ struct ScsiInqData #define NTC_DO_SEND_START 0x08 /* Send start command SPINUP */ #define NTC_DO_DISCONNECT 0x04 /* Enable SCSI disconnect */ #define NTC_DO_SYNC_NEGO 0x02 /* Sync negotiation */ -#define NTC_DO_PARITY_CHK 0x01 /* (it sould define at NAC) */ +#define NTC_DO_PARITY_CHK 0x01 /* (it should define at NAC) */ /* Parity check enable */ /************************************************************************/ diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c index 7cae0bc8539..42fe52902ad 100644 --- a/drivers/scsi/device_handler/scsi_dh_alua.c +++ b/drivers/scsi/device_handler/scsi_dh_alua.c @@ -541,7 +541,7 @@ static int alua_check_sense(struct scsi_device *sdev, * * Evaluate the Target Port Group State. * Returns SCSI_DH_DEV_OFFLINED if the path is - * found to be unuseable. + * found to be unusable. */ static int alua_rtpg(struct scsi_device *sdev, struct alua_dh_data *h) { @@ -620,7 +620,7 @@ static int alua_rtpg(struct scsi_device *sdev, struct alua_dh_data *h) break; case TPGS_STATE_OFFLINE: case TPGS_STATE_UNAVAILABLE: - /* Path unuseable for unavailable/offline */ + /* Path unusable for unavailable/offline */ err = SCSI_DH_DEV_OFFLINED; break; default: diff --git a/drivers/scsi/dpt/sys_info.h b/drivers/scsi/dpt/sys_info.h index a90c4cb8ea8..a4aa1c31ff7 100644 --- a/drivers/scsi/dpt/sys_info.h +++ b/drivers/scsi/dpt/sys_info.h @@ -79,9 +79,9 @@ typedef struct { #endif - uSHORT cylinders; /* Upto 1024 */ - uCHAR heads; /* Upto 255 */ - uCHAR sectors; /* Upto 63 */ + uSHORT cylinders; /* Up to 1024 */ + uCHAR heads; /* Up to 255 */ + uCHAR sectors; /* Up to 63 */ #ifdef __cplusplus diff --git a/drivers/scsi/eata.c b/drivers/scsi/eata.c index 53925ac178f..0eb4fe6a4c8 100644 --- a/drivers/scsi/eata.c +++ b/drivers/scsi/eata.c @@ -63,7 +63,7 @@ * ep:[y|n] eisa_probe=[1|0] CONFIG_EISA defined * pp:[y|n] pci_probe=[1|0] CONFIG_PCI defined * - * The default action is to perform probing if the corrisponding + * The default action is to perform probing if the corresponding * bus is configured and to skip probing otherwise. * * + If pci_probe is in effect and a list of I/O ports is specified diff --git a/drivers/scsi/fcoe/fcoe_ctlr.c b/drivers/scsi/fcoe/fcoe_ctlr.c index c93f007e702..9d38be2a41f 100644 --- a/drivers/scsi/fcoe/fcoe_ctlr.c +++ b/drivers/scsi/fcoe/fcoe_ctlr.c @@ -656,7 +656,7 @@ int fcoe_ctlr_els_send(struct fcoe_ctlr *fip, struct fc_lport *lport, * If non-FIP, we may have gotten an SID by accepting an FLOGI * from a point-to-point connection. Switch to using * the source mac based on the SID. The destination - * MAC in this case would have been set by receving the + * MAC in this case would have been set by receiving the * FLOGI. */ if (fip->state == FIP_ST_NON_FIP) { @@ -1876,7 +1876,7 @@ static void fcoe_ctlr_vn_send(struct fcoe_ctlr *fip, * fcoe_ctlr_vn_rport_callback - Event handler for rport events. * @lport: The lport which is receiving the event * @rdata: remote port private data - * @event: The event that occured + * @event: The event that occurred * * Locking Note: The rport lock must not be held when calling this function. */ diff --git a/drivers/scsi/fdomain.c b/drivers/scsi/fdomain.c index 69b7aa54f43..643f6d500fe 100644 --- a/drivers/scsi/fdomain.c +++ b/drivers/scsi/fdomain.c @@ -174,7 +174,7 @@ Future Domain sold DOS BIOS source for $250 and the UN*X driver source was $750, but these required a non-disclosure agreement, so even if I could have afforded them, they would *not* have been useful for writing this - publically distributable driver. Future Domain technical support has + publicly distributable driver. Future Domain technical support has provided some information on the phone and have sent a few useful FAXs. They have been much more helpful since they started to recognize that the word "Linux" refers to an operating system :-). diff --git a/drivers/scsi/fnic/fnic_fcs.c b/drivers/scsi/fnic/fnic_fcs.c index 2b48d79bad9..3c53c3478ee 100644 --- a/drivers/scsi/fnic/fnic_fcs.c +++ b/drivers/scsi/fnic/fnic_fcs.c @@ -411,7 +411,7 @@ int fnic_rq_cmpl_handler(struct fnic *fnic, int rq_work_to_do) err = vnic_rq_fill(&fnic->rq[i], fnic_alloc_rq_frame); if (err) shost_printk(KERN_ERR, fnic->lport->host, - "fnic_alloc_rq_frame cant alloc" + "fnic_alloc_rq_frame can't alloc" " frame\n"); } tot_rq_work_done += cur_work_done; diff --git a/drivers/scsi/fnic/fnic_scsi.c b/drivers/scsi/fnic/fnic_scsi.c index 22d02404d15..538b31c2cf5 100644 --- a/drivers/scsi/fnic/fnic_scsi.c +++ b/drivers/scsi/fnic/fnic_scsi.c @@ -1123,7 +1123,7 @@ void fnic_rport_exch_reset(struct fnic *fnic, u32 port_id) fc_lun.scsi_lun, io_req)) { /* * Revert the cmd state back to old state, if - * it hasnt changed in between. This cmd will get + * it hasn't changed in between. This cmd will get * aborted later by scsi_eh, or cleaned up during * lun reset */ @@ -1208,7 +1208,7 @@ void fnic_terminate_rport_io(struct fc_rport *rport) fc_lun.scsi_lun, io_req)) { /* * Revert the cmd state back to old state, if - * it hasnt changed in between. This cmd will get + * it hasn't changed in between. This cmd will get * aborted later by scsi_eh, or cleaned up during * lun reset */ diff --git a/drivers/scsi/g_NCR5380.c b/drivers/scsi/g_NCR5380.c index 427a56d3117..81182badfeb 100644 --- a/drivers/scsi/g_NCR5380.c +++ b/drivers/scsi/g_NCR5380.c @@ -566,7 +566,7 @@ generic_NCR5380_biosparam(struct scsi_device *sdev, struct block_device *bdev, * @dst: buffer to read into * @len: buffer length * - * Perform a psuedo DMA mode read from an NCR53C400 or equivalent + * Perform a pseudo DMA mode read from an NCR53C400 or equivalent * controller */ @@ -650,7 +650,7 @@ static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst, * @dst: buffer to read into * @len: buffer length * - * Perform a psuedo DMA mode read from an NCR53C400 or equivalent + * Perform a pseudo DMA mode read from an NCR53C400 or equivalent * controller */ diff --git a/drivers/scsi/gdth.h b/drivers/scsi/gdth.h index 120a0625a7b..d969855ac64 100644 --- a/drivers/scsi/gdth.h +++ b/drivers/scsi/gdth.h @@ -895,7 +895,7 @@ typedef struct { u8 ldr_no; /* log. drive no. */ u8 rw_attribs; /* r/w attributes */ u8 cluster_type; /* cluster properties */ - u8 media_changed; /* Flag:MOUNT/UNMOUNT occured */ + u8 media_changed; /* Flag:MOUNT/UNMOUNT occurred */ u32 start_sec; /* start sector */ } hdr[MAX_LDRIVES]; /* host drives */ struct { diff --git a/drivers/scsi/gvp11.c b/drivers/scsi/gvp11.c index 2ce26eb7a1e..50bb54150a7 100644 --- a/drivers/scsi/gvp11.c +++ b/drivers/scsi/gvp11.c @@ -300,7 +300,7 @@ static int __devinit gvp11_probe(struct zorro_dev *z, /* * Rumors state that some GVP ram boards use the same product * code as the SCSI controllers. Therefore if the board-size - * is not 64KB we asume it is a ram board and bail out. + * is not 64KB we assume it is a ram board and bail out. */ if (zorro_resource_len(z) != 0x10000) return -ENODEV; diff --git a/drivers/scsi/imm.c b/drivers/scsi/imm.c index 99aa0e5699b..26cd9d1d757 100644 --- a/drivers/scsi/imm.c +++ b/drivers/scsi/imm.c @@ -3,7 +3,7 @@ * * (The IMM is the embedded controller in the ZIP Plus drive.) * - * My unoffical company acronym list is 21 pages long: + * My unofficial company acronym list is 21 pages long: * FLA: Four letter acronym with built in facility for * future expansion to five letters. */ diff --git a/drivers/scsi/initio.c b/drivers/scsi/initio.c index 9627d062e16..dd741bcd6cc 100644 --- a/drivers/scsi/initio.c +++ b/drivers/scsi/initio.c @@ -242,7 +242,7 @@ static u8 i91udftNvRam[64] = static u8 initio_rate_tbl[8] = /* fast 20 */ { - /* nanosecond devide by 4 */ + /* nanosecond divide by 4 */ 12, /* 50ns, 20M */ 18, /* 75ns, 13.3M */ 25, /* 100ns, 10M */ @@ -1917,7 +1917,7 @@ static int int_initio_scsi_rst(struct initio_host * host) } /** - * int_initio_scsi_resel - Reselection occured + * int_initio_scsi_resel - Reselection occurred * @host: InitIO host adapter * * A SCSI reselection event has been signalled and the interrupt diff --git a/drivers/scsi/initio.h b/drivers/scsi/initio.h index e58af9e9550..219b901bdc2 100644 --- a/drivers/scsi/initio.h +++ b/drivers/scsi/initio.h @@ -116,7 +116,7 @@ typedef struct { #define TUL_SBusId 0x89 /* 09 R SCSI BUS ID */ #define TUL_STimeOut 0x8A /* 0A W Sel/Resel Time Out Register */ #define TUL_SIdent 0x8A /* 0A R Identify Message Register */ -#define TUL_SAvail 0x8A /* 0A R Availiable Counter Register */ +#define TUL_SAvail 0x8A /* 0A R Available Counter Register */ #define TUL_SData 0x8B /* 0B R/W SCSI data in/out */ #define TUL_SFifo 0x8C /* 0C R/W FIFO */ #define TUL_SSignal 0x90 /* 10 R/W SCSI signal in/out */ @@ -389,7 +389,7 @@ struct scsi_ctrl_blk { /* Bit Definition for status */ #define SCB_RENT 0x01 #define SCB_PEND 0x02 -#define SCB_CONTIG 0x04 /* Contigent Allegiance */ +#define SCB_CONTIG 0x04 /* Contingent Allegiance */ #define SCB_SELECT 0x08 #define SCB_BUSY 0x10 #define SCB_DONE 0x20 diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c index b2511acd39b..218f71a8726 100644 --- a/drivers/scsi/ips.c +++ b/drivers/scsi/ips.c @@ -137,7 +137,7 @@ /* - Fix path/name for scsi_hosts.h include for 2.6 kernels */ /* - Fix sort order of 7k */ /* - Remove 3 unused "inline" functions */ -/* 7.12.xx - Use STATIC functions whereever possible */ +/* 7.12.xx - Use STATIC functions wherever possible */ /* - Clean up deprecated MODULE_PARM calls */ /* 7.12.05 - Remove Version Matching per IBM request */ /*****************************************************************************/ @@ -1665,7 +1665,7 @@ ips_flash_copperhead(ips_ha_t * ha, ips_passthru_t * pt, ips_scb_t * scb) int datasize; /* Trombone is the only copperhead that can do packet flash, but only - * for firmware. No one said it had to make sence. */ + * for firmware. No one said it had to make sense. */ if (IPS_IS_TROMBONE(ha) && pt->CoppCP.cmd.flashfw.type == IPS_FW_IMAGE) { if (ips_usrcmd(ha, pt, scb)) return IPS_SUCCESS; diff --git a/drivers/scsi/ips.h b/drivers/scsi/ips.h index 4e49fbcfe8a..f2df0593332 100644 --- a/drivers/scsi/ips.h +++ b/drivers/scsi/ips.h @@ -1193,7 +1193,7 @@ typedef struct { #define IPS_VER_SEBRING "7.12.02" #define IPS_VER_KEYWEST "7.12.02" -/* Compatability IDs for various adapters */ +/* Compatibility IDs for various adapters */ #define IPS_COMPAT_UNKNOWN "" #define IPS_COMPAT_CURRENT "KW710" #define IPS_COMPAT_SERVERAID1 "2.25.01" diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index a860452a8f7..3df985305f6 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -295,7 +295,7 @@ static int iscsi_sw_tcp_xmit(struct iscsi_conn *conn) rc = iscsi_sw_tcp_xmit_segment(tcp_conn, segment); /* * We may not have been able to send data because the conn - * is getting stopped. libiscsi will know so propogate err + * is getting stopped. libiscsi will know so propagate err * for it to do the right thing. */ if (rc == -EAGAIN) diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c index 28231badd9e..77035a746f6 100644 --- a/drivers/scsi/libfc/fc_exch.c +++ b/drivers/scsi/libfc/fc_exch.c @@ -1042,7 +1042,7 @@ static void fc_exch_set_addr(struct fc_exch *ep, } /** - * fc_seq_els_rsp_send() - Send an ELS response using infomation from + * fc_seq_els_rsp_send() - Send an ELS response using information from * the existing sequence/exchange. * @fp: The received frame * @els_cmd: The ELS command to be sent @@ -1153,7 +1153,7 @@ static void fc_seq_send_ack(struct fc_seq *sp, const struct fc_frame *rx_fp) * fc_exch_send_ba_rjt() - Send BLS Reject * @rx_fp: The frame being rejected * @reason: The reason the frame is being rejected - * @explan: The explaination for the rejection + * @explan: The explanation for the rejection * * This is for rejecting BA_ABTS only. */ diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c index b1b03af158b..5b799a37ad0 100644 --- a/drivers/scsi/libfc/fc_fcp.c +++ b/drivers/scsi/libfc/fc_fcp.c @@ -870,7 +870,7 @@ static void fc_fcp_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp) fsp->scsi_resid = ntohl(rp_ex->fr_resid); /* * The cmnd->underflow is the minimum number of - * bytes that must be transfered for this + * bytes that must be transferred for this * command. Provided a sense condition is not * present, make sure the actual amount * transferred is at least the underflow value @@ -1306,7 +1306,7 @@ static int fc_lun_reset(struct fc_lport *lport, struct fc_fcp_pkt *fsp, } /** - * fc_tm_done() - Task Managment response handler + * fc_tm_done() - Task Management response handler * @seq: The sequence that the response is on * @fp: The response frame * @arg: The FCP packet the response is for diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c index 8c08b210001..906bbcad0e2 100644 --- a/drivers/scsi/libfc/fc_lport.c +++ b/drivers/scsi/libfc/fc_lport.c @@ -52,7 +52,7 @@ * while making the callback. To ensure that the rport is not free'd while * processing the callback the rport callbacks are serialized through a * single-threaded workqueue. An rport would never be free'd while in a - * callback handler becuase no other rport work in this queue can be executed + * callback handler because no other rport work in this queue can be executed * at the same time. * * When discovery succeeds or fails a callback is made to the lport as @@ -163,7 +163,7 @@ static int fc_frame_drop(struct fc_lport *lport, struct fc_frame *fp) * fc_lport_rport_callback() - Event handler for rport events * @lport: The lport which is receiving the event * @rdata: private remote port data - * @event: The event that occured + * @event: The event that occurred * * Locking Note: The rport lock should not be held when calling * this function. @@ -379,7 +379,7 @@ static void fc_lport_add_fc4_type(struct fc_lport *lport, enum fc_fh_type type) /** * fc_lport_recv_rlir_req() - Handle received Registered Link Incident Report. - * @lport: Fibre Channel local port recieving the RLIR + * @lport: Fibre Channel local port receiving the RLIR * @fp: The RLIR request frame * * Locking Note: The lport lock is expected to be held before calling @@ -396,7 +396,7 @@ static void fc_lport_recv_rlir_req(struct fc_lport *lport, struct fc_frame *fp) /** * fc_lport_recv_echo_req() - Handle received ECHO request - * @lport: The local port recieving the ECHO + * @lport: The local port receiving the ECHO * @fp: ECHO request frame * * Locking Note: The lport lock is expected to be held before calling @@ -432,7 +432,7 @@ static void fc_lport_recv_echo_req(struct fc_lport *lport, /** * fc_lport_recv_rnid_req() - Handle received Request Node ID data request - * @lport: The local port recieving the RNID + * @lport: The local port receiving the RNID * @fp: The RNID request frame * * Locking Note: The lport lock is expected to be held before calling @@ -491,7 +491,7 @@ static void fc_lport_recv_rnid_req(struct fc_lport *lport, /** * fc_lport_recv_logo_req() - Handle received fabric LOGO request - * @lport: The local port recieving the LOGO + * @lport: The local port receiving the LOGO * @fp: The LOGO request frame * * Locking Note: The lport lock is exected to be held before calling @@ -771,7 +771,7 @@ EXPORT_SYMBOL(fc_lport_set_local_id); /** * fc_lport_recv_flogi_req() - Receive a FLOGI request - * @lport: The local port that recieved the request + * @lport: The local port that received the request * @rx_fp: The FLOGI frame * * A received FLOGI request indicates a point-to-point connection. @@ -858,7 +858,7 @@ out: * if an rport should handle the request. * * Locking Note: This function should not be called with the lport - * lock held becuase it will grab the lock. + * lock held because it will grab the lock. */ static void fc_lport_recv_els_req(struct fc_lport *lport, struct fc_frame *fp) @@ -925,7 +925,7 @@ struct fc4_prov fc_lport_els_prov = { * @fp: The frame the request is in * * Locking Note: This function should not be called with the lport - * lock held becuase it may grab the lock. + * lock held because it may grab the lock. */ static void fc_lport_recv_req(struct fc_lport *lport, struct fc_frame *fp) diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c index f3f693b772a..874e29d9533 100644 --- a/drivers/scsi/libsas/sas_expander.c +++ b/drivers/scsi/libsas/sas_expander.c @@ -240,7 +240,7 @@ static int sas_ex_phy_discover_helper(struct domain_device *dev, u8 *disc_req, disc_resp, DISCOVER_RESP_SIZE); if (res) return res; - /* This is detecting a failure to transmit inital + /* This is detecting a failure to transmit initial * dev to host FIS as described in section G.5 of * sas-2 r 04b */ dr = &((struct smp_resp *)disc_resp)->disc; diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 4e0faa00b96..17d789325f4 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -4515,7 +4515,7 @@ static FC_RPORT_ATTR(field, S_IRUGO, lpfc_show_rport_##field, NULL) * Description: * This function is called by the transport after the @fc_vport's symbolic name * has been changed. This function re-registers the symbolic name with the - * switch to propogate the change into the fabric if the vport is active. + * switch to propagate the change into the fabric if the vport is active. **/ static void lpfc_set_vport_symbolic_name(struct fc_vport *fc_vport) diff --git a/drivers/scsi/lpfc/lpfc_bsg.c b/drivers/scsi/lpfc/lpfc_bsg.c index 793b9f1131f..77b2871d96b 100644 --- a/drivers/scsi/lpfc/lpfc_bsg.c +++ b/drivers/scsi/lpfc/lpfc_bsg.c @@ -1939,7 +1939,7 @@ out: * @rxxri: Receive exchange id * @len: Number of data bytes * - * This function allocates and posts a data buffer of sufficient size to recieve + * This function allocates and posts a data buffer of sufficient size to receive * an unsolicted CT command. **/ static int lpfcdiag_loop_post_rxbufs(struct lpfc_hba *phba, uint16_t rxxri, diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c index a753581509d..3d967741c70 100644 --- a/drivers/scsi/lpfc/lpfc_debugfs.c +++ b/drivers/scsi/lpfc/lpfc_debugfs.c @@ -908,7 +908,7 @@ lpfc_debugfs_dumpData_open(struct inode *inode, struct file *file) if (!debug) goto out; - /* Round to page boundry */ + /* Round to page boundary */ printk(KERN_ERR "9059 BLKGRD: %s: _dump_buf_data=0x%p\n", __func__, _dump_buf_data); debug->buffer = _dump_buf_data; @@ -938,7 +938,7 @@ lpfc_debugfs_dumpDif_open(struct inode *inode, struct file *file) if (!debug) goto out; - /* Round to page boundry */ + /* Round to page boundary */ printk(KERN_ERR "9060 BLKGRD: %s: _dump_buf_dif=0x%p file=%s\n", __func__, _dump_buf_dif, file->f_dentry->d_name.name); debug->buffer = _dump_buf_dif; @@ -2158,7 +2158,7 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport) debugfs_create_dir(name, phba->hba_debugfs_root); if (!vport->vport_debugfs_root) { lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, - "0417 Cant create debugfs\n"); + "0417 Can't create debugfs\n"); goto debug_failed; } atomic_inc(&phba->debugfs_vport_count); @@ -2211,7 +2211,7 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport) vport, &lpfc_debugfs_op_nodelist); if (!vport->debug_nodelist) { lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, - "0409 Cant create debugfs nodelist\n"); + "0409 Can't create debugfs nodelist\n"); goto debug_failed; } diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index 735028fedda..d34b69f9cdb 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -102,7 +102,7 @@ lpfc_els_chk_latt(struct lpfc_vport *vport) phba->pport->port_state); /* CLEAR_LA should re-enable link attention events and - * we should then imediately take a LATT event. The + * we should then immediately take a LATT event. The * LATT processing should call lpfc_linkdown() which * will cleanup any left over in-progress discovery * events. @@ -1599,7 +1599,7 @@ out: * This routine is the completion callback function for issuing the Port * Login (PLOGI) command. For PLOGI completion, there must be an active * ndlp on the vport node list that matches the remote node ID from the - * PLOGI reponse IOCB. If such ndlp does not exist, the PLOGI is simply + * PLOGI response IOCB. If such ndlp does not exist, the PLOGI is simply * ignored and command IOCB released. The PLOGI response IOCB status is * checked for error conditons. If there is error status reported, PLOGI * retry shall be attempted by invoking the lpfc_els_retry() routine. diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index 154c715fb3a..301498301a8 100644 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -739,7 +739,7 @@ lpfc_do_work(void *p) /* * This is only called to handle FC worker events. Since this a rare - * occurance, we allocate a struct lpfc_work_evt structure here instead of + * occurrence, we allocate a struct lpfc_work_evt structure here instead of * embedding it in the IOCB. */ int @@ -1348,7 +1348,7 @@ lpfc_register_fcf(struct lpfc_hba *phba) int rc; spin_lock_irq(&phba->hbalock); - /* If the FCF is not availabe do nothing. */ + /* If the FCF is not available do nothing. */ if (!(phba->fcf.fcf_flag & FCF_AVAILABLE)) { phba->hba_flag &= ~(FCF_TS_INPROG | FCF_RR_INPROG); spin_unlock_irq(&phba->hbalock); @@ -1538,7 +1538,7 @@ lpfc_match_fcf_conn_list(struct lpfc_hba *phba, /* * If user did not specify any addressing mode, or if the - * prefered addressing mode specified by user is not supported + * preferred addressing mode specified by user is not supported * by FCF, allow fabric to pick the addressing mode. */ *addr_mode = bf_get(lpfc_fcf_record_mac_addr_prov, @@ -1553,7 +1553,7 @@ lpfc_match_fcf_conn_list(struct lpfc_hba *phba, FCFCNCT_AM_SPMA) ? LPFC_FCF_SPMA : LPFC_FCF_FPMA; /* - * If the user specified a prefered address mode, use the + * If the user specified a preferred address mode, use the * addr mode only if FCF support the addr_mode. */ else if ((conn_entry->conn_rec.flags & FCFCNCT_AM_VALID) && @@ -3117,7 +3117,7 @@ lpfc_mbx_cmpl_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) * back at reg login state so this * mbox needs to be ignored becase * there is another reg login in - * proccess. + * process. */ spin_lock_irq(shost->host_lock); ndlp->nlp_flag &= ~NLP_IGNR_REG_CMPL; @@ -4477,7 +4477,7 @@ lpfc_setup_disc_node(struct lpfc_vport *vport, uint32_t did) if ((vport->fc_flag & FC_RSCN_MODE) && !(vport->fc_flag & FC_NDISC_ACTIVE)) { if (lpfc_rscn_payload_check(vport, did)) { - /* If we've already recieved a PLOGI from this NPort + /* If we've already received a PLOGI from this NPort * we don't need to try to discover it again. */ if (ndlp->nlp_flag & NLP_RCV_PLOGI) @@ -4493,7 +4493,7 @@ lpfc_setup_disc_node(struct lpfc_vport *vport, uint32_t did) } else ndlp = NULL; } else { - /* If we've already recieved a PLOGI from this NPort, + /* If we've already received a PLOGI from this NPort, * or we are already in the process of discovery on it, * we don't need to try to discover it again. */ @@ -5756,7 +5756,7 @@ lpfc_read_fcoe_param(struct lpfc_hba *phba, * @size: Size of the data buffer. * @rec_type: Record type to be searched. * - * This function searches config region data to find the begining + * This function searches config region data to find the beginning * of the record specified by record_type. If record found, this * function return pointer to the record else return NULL. */ diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index e6ebe516cfb..505f88443b5 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -4466,7 +4466,7 @@ lpfc_sli4_driver_resource_unset(struct lpfc_hba *phba) } /** - * lpfc_init_api_table_setup - Set up init api fucntion jump table + * lpfc_init_api_table_setup - Set up init api function jump table * @phba: The hba struct for which this call is being executed. * @dev_grp: The HBA PCI-Device group number. * @@ -4850,7 +4850,7 @@ out_free_mem: * * Return codes * 0 - successful - * -ENOMEM - No availble memory + * -ENOMEM - No available memory * -EIO - The mailbox failed to complete successfully. **/ int @@ -5730,7 +5730,7 @@ lpfc_destroy_bootstrap_mbox(struct lpfc_hba *phba) * * Return codes * 0 - successful - * -ENOMEM - No availble memory + * -ENOMEM - No available memory * -EIO - The mailbox failed to complete successfully. **/ static int @@ -5835,7 +5835,7 @@ lpfc_sli4_read_config(struct lpfc_hba *phba) * * Return codes * 0 - successful - * -ENOMEM - No availble memory + * -ENOMEM - No available memory * -EIO - The mailbox failed to complete successfully. **/ static int @@ -5894,7 +5894,7 @@ lpfc_setup_endian_order(struct lpfc_hba *phba) * * Return codes * 0 - successful - * -ENOMEM - No availble memory + * -ENOMEM - No available memory * -EIO - The mailbox failed to complete successfully. **/ static int @@ -6189,7 +6189,7 @@ out_error: * * Return codes * 0 - successful - * -ENOMEM - No availble memory + * -ENOMEM - No available memory * -EIO - The mailbox failed to complete successfully. **/ static void @@ -6253,7 +6253,7 @@ lpfc_sli4_queue_destroy(struct lpfc_hba *phba) * * Return codes * 0 - successful - * -ENOMEM - No availble memory + * -ENOMEM - No available memory * -EIO - The mailbox failed to complete successfully. **/ int @@ -6498,7 +6498,7 @@ out_error: * * Return codes * 0 - successful - * -ENOMEM - No availble memory + * -ENOMEM - No available memory * -EIO - The mailbox failed to complete successfully. **/ void @@ -6543,7 +6543,7 @@ lpfc_sli4_queue_unset(struct lpfc_hba *phba) * * Return codes * 0 - successful - * -ENOMEM - No availble memory + * -ENOMEM - No available memory **/ static int lpfc_sli4_cq_event_pool_create(struct lpfc_hba *phba) @@ -6704,7 +6704,7 @@ lpfc_sli4_cq_event_release_all(struct lpfc_hba *phba) * * Return codes * 0 - successful - * -ENOMEM - No availble memory + * -ENOMEM - No available memory * -EIO - The mailbox failed to complete successfully. **/ int diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c index dba32dfdb59..fbab9734e9b 100644 --- a/drivers/scsi/lpfc/lpfc_mbox.c +++ b/drivers/scsi/lpfc/lpfc_mbox.c @@ -1834,7 +1834,7 @@ lpfc_sli4_mbox_opcode_get(struct lpfc_hba *phba, struct lpfcMboxq *mbox) * @fcf_index: index to fcf table. * * This routine routine allocates and constructs non-embedded mailbox command - * for reading a FCF table entry refered by @fcf_index. + * for reading a FCF table entry referred by @fcf_index. * * Return: pointer to the mailbox command constructed if successful, otherwise * NULL. diff --git a/drivers/scsi/lpfc/lpfc_nl.h b/drivers/scsi/lpfc/lpfc_nl.h index f3cfbe2ce98..f2b1bbcb196 100644 --- a/drivers/scsi/lpfc/lpfc_nl.h +++ b/drivers/scsi/lpfc/lpfc_nl.h @@ -50,7 +50,7 @@ * and subcategory. The event type must come first. * The subcategory further defines the data that follows in the rest * of the payload. Each category will have its own unique header plus - * any addtional data unique to the subcategory. + * any additional data unique to the subcategory. * The payload sent via the fc transport is one-way driver->application. */ diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c index 52b35159fc3..0d92d4205ea 100644 --- a/drivers/scsi/lpfc/lpfc_nportdisc.c +++ b/drivers/scsi/lpfc/lpfc_nportdisc.c @@ -658,7 +658,7 @@ lpfc_disc_set_adisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) return 0; } /** - * lpfc_release_rpi - Release a RPI by issueing unreg_login mailbox cmd. + * lpfc_release_rpi - Release a RPI by issuing unreg_login mailbox cmd. * @phba : Pointer to lpfc_hba structure. * @vport: Pointer to lpfc_vport structure. * @rpi : rpi to be release. diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index 2b962b020cf..fe7cc84e773 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -577,7 +577,7 @@ lpfc_new_scsi_buf_s3(struct lpfc_vport *vport, int num_to_alloc) iocb->un.fcpi64.bdl.addrHigh = 0; iocb->ulpBdeCount = 0; iocb->ulpLe = 0; - /* fill in responce BDE */ + /* fill in response BDE */ iocb->unsli3.fcp_ext.rbde.tus.f.bdeFlags = BUFF_TYPE_BDE_64; iocb->unsli3.fcp_ext.rbde.tus.f.bdeSize = @@ -1217,10 +1217,10 @@ lpfc_scsi_prep_dma_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) (2 * sizeof(struct ulp_bde64))); data_bde->addrHigh = putPaddrHigh(physaddr); data_bde->addrLow = putPaddrLow(physaddr); - /* ebde count includes the responce bde and data bpl */ + /* ebde count includes the response bde and data bpl */ iocb_cmd->unsli3.fcp_ext.ebde_count = 2; } else { - /* ebde count includes the responce bde and data bdes */ + /* ebde count includes the response bde and data bdes */ iocb_cmd->unsli3.fcp_ext.ebde_count = (num_bde + 1); } } else { @@ -2380,7 +2380,7 @@ lpfc_handle_fcp_err(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd, } /* * The cmnd->underflow is the minimum number of bytes that must - * be transfered for this command. Provided a sense condition + * be transferred for this command. Provided a sense condition * is not present, make sure the actual amount transferred is at * least the underflow value or fail. */ @@ -2873,7 +2873,7 @@ lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_vport *vport, } /** - * lpfc_scsi_api_table_setup - Set up scsi api fucntion jump table + * lpfc_scsi_api_table_setup - Set up scsi api function jump table * @phba: The hba struct for which this call is being executed. * @dev_grp: The HBA PCI-Device group number. * diff --git a/drivers/scsi/lpfc/lpfc_scsi.h b/drivers/scsi/lpfc/lpfc_scsi.h index 5932273870a..ce645b20a6a 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.h +++ b/drivers/scsi/lpfc/lpfc_scsi.h @@ -130,7 +130,7 @@ struct lpfc_scsi_buf { dma_addr_t nonsg_phys; /* Non scatter-gather physical address. */ /* - * data and dma_handle are the kernel virutal and bus address of the + * data and dma_handle are the kernel virtual and bus address of the * dma-able buffer containing the fcp_cmd, fcp_rsp and a scatter * gather bde list that supports the sg_tablesize value. */ diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 4746dcd756d..dacabbe0a58 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -2817,7 +2817,7 @@ void lpfc_poll_eratt(unsigned long ptr) * This function is called from the interrupt context when there is a ring * event for the fcp ring. The caller does not hold any lock. * The function processes each response iocb in the response ring until it - * finds an iocb with LE bit set and chains all the iocbs upto the iocb with + * finds an iocb with LE bit set and chains all the iocbs up to the iocb with * LE bit set. The function will call the completion handler of the command iocb * if the response iocb indicates a completion for a command iocb or it is * an abort completion. The function will call lpfc_sli_process_unsol_iocb @@ -5117,7 +5117,7 @@ lpfc_mbox_timeout_handler(struct lpfc_hba *phba) /* Setting state unknown so lpfc_sli_abort_iocb_ring * would get IOCB_ERROR from lpfc_sli_issue_iocb, allowing - * it to fail all oustanding SCSI IO. + * it to fail all outstanding SCSI IO. */ spin_lock_irq(&phba->pport->work_port_lock); phba->pport->work_port_events &= ~WORKER_MBOX_TMO; @@ -6031,7 +6031,7 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag) } /** - * lpfc_mbox_api_table_setup - Set up mbox api fucntion jump table + * lpfc_mbox_api_table_setup - Set up mbox api function jump table * @phba: The hba struct for which this call is being executed. * @dev_grp: The HBA PCI-Device group number. * @@ -6847,7 +6847,7 @@ __lpfc_sli_issue_iocb(struct lpfc_hba *phba, uint32_t ring_number, } /** - * lpfc_sli_api_table_setup - Set up sli api fucntion jump table + * lpfc_sli_api_table_setup - Set up sli api function jump table * @phba: The hba struct for which this call is being executed. * @dev_grp: The HBA PCI-Device group number. * @@ -7521,7 +7521,7 @@ lpfc_sli_ring_taggedbuf_get(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, struct lpfc_dmabuf *mp, *next_mp; struct list_head *slp = &pring->postbufq; - /* Search postbufq, from the begining, looking for a match on tag */ + /* Search postbufq, from the beginning, looking for a match on tag */ spin_lock_irq(&phba->hbalock); list_for_each_entry_safe(mp, next_mp, &pring->postbufq, list) { if (mp->buffer_tag == tag) { @@ -7565,7 +7565,7 @@ lpfc_sli_ringpostbuf_get(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, struct lpfc_dmabuf *mp, *next_mp; struct list_head *slp = &pring->postbufq; - /* Search postbufq, from the begining, looking for a match on phys */ + /* Search postbufq, from the beginning, looking for a match on phys */ spin_lock_irq(&phba->hbalock); list_for_each_entry_safe(mp, next_mp, &pring->postbufq, list) { if (mp->phys == phys) { @@ -8438,7 +8438,7 @@ lpfc_sli_mbox_sys_shutdown(struct lpfc_hba *phba) * for possible error attention events. The caller must hold the hostlock * with spin_lock_irq(). * - * This fucntion returns 1 when there is Error Attention in the Host Attention + * This function returns 1 when there is Error Attention in the Host Attention * Register and returns 0 otherwise. **/ static int @@ -8491,7 +8491,7 @@ unplug_err: * for possible error attention events. The caller must hold the hostlock * with spin_lock_irq(). * - * This fucntion returns 1 when there is Error Attention in the Host Attention + * This function returns 1 when there is Error Attention in the Host Attention * Register and returns 0 otherwise. **/ static int @@ -8581,7 +8581,7 @@ lpfc_sli4_eratt_read(struct lpfc_hba *phba) * This function is called from timer soft interrupt context to check HBA's * error attention register bit for error attention events. * - * This fucntion returns 1 when there is Error Attention in the Host Attention + * This function returns 1 when there is Error Attention in the Host Attention * Register and returns 0 otherwise. **/ int @@ -9684,7 +9684,7 @@ out: * @cq: Pointer to the completion queue. * @wcqe: Pointer to a completion queue entry. * - * This routine process a slow-path work-queue or recieve queue completion queue + * This routine process a slow-path work-queue or receive queue completion queue * entry. * * Return: true if work posted to worker thread, otherwise false. @@ -12971,7 +12971,7 @@ lpfc_sli4_build_dflt_fcf_record(struct lpfc_hba *phba, * record and processing it one at a time starting from the @fcf_index * for initial FCF discovery or fast FCF failover rediscovery. * - * Return 0 if the mailbox command is submitted sucessfully, none 0 + * Return 0 if the mailbox command is submitted successfully, none 0 * otherwise. **/ int @@ -13032,7 +13032,7 @@ fail_fcf_scan: * This routine is invoked to read an FCF record indicated by @fcf_index * and to use it for FLOGI roundrobin FCF failover. * - * Return 0 if the mailbox command is submitted sucessfully, none 0 + * Return 0 if the mailbox command is submitted successfully, none 0 * otherwise. **/ int @@ -13078,7 +13078,7 @@ fail_fcf_read: * This routine is invoked to read an FCF record indicated by @fcf_index to * determine whether it's eligible for FLOGI roundrobin failover list. * - * Return 0 if the mailbox command is submitted sucessfully, none 0 + * Return 0 if the mailbox command is submitted successfully, none 0 * otherwise. **/ int diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c index c212694a971..f2684dd09ed 100644 --- a/drivers/scsi/megaraid.c +++ b/drivers/scsi/megaraid.c @@ -284,7 +284,7 @@ mega_query_adapter(adapter_t *adapter) adapter->host->max_id = 16; /* max targets per channel */ - adapter->host->max_lun = 7; /* Upto 7 luns for non disk devices */ + adapter->host->max_lun = 7; /* Up to 7 luns for non disk devices */ adapter->host->cmd_per_lun = max_cmd_per_lun; @@ -3734,7 +3734,7 @@ mega_m_to_n(void __user *arg, nitioctl_t *uioc) * check is the application conforms to NIT. We do not have to do much * in that case. * We exploit the fact that the signature is stored in the very - * begining of the structure. + * beginning of the structure. */ if( copy_from_user(signature, arg, 7) ) diff --git a/drivers/scsi/megaraid.h b/drivers/scsi/megaraid.h index 853411911b2..9a7897f8ca4 100644 --- a/drivers/scsi/megaraid.h +++ b/drivers/scsi/megaraid.h @@ -532,9 +532,9 @@ struct uioctl_t { /* * struct mcontroller is used to pass information about the controllers in the - * system. Its upto the application how to use the information. We are passing + * system. Its up to the application how to use the information. We are passing * as much info about the cards as possible and useful. Before issuing the - * call to find information about the cards, the applicaiton needs to issue a + * call to find information about the cards, the application needs to issue a * ioctl first to find out the number of controllers in the system. */ #define MAX_CONTROLLERS 32 @@ -804,7 +804,7 @@ typedef struct { unsigned long base; void __iomem *mmio_base; - /* mbox64 with mbox not aligned on 16-byte boundry */ + /* mbox64 with mbox not aligned on 16-byte boundary */ mbox64_t *una_mbox64; dma_addr_t una_mbox64_dma; diff --git a/drivers/scsi/megaraid/mbox_defs.h b/drivers/scsi/megaraid/mbox_defs.h index ce2487a888e..e01c6f7c2ca 100644 --- a/drivers/scsi/megaraid/mbox_defs.h +++ b/drivers/scsi/megaraid/mbox_defs.h @@ -660,7 +660,7 @@ typedef struct { * @lparam : logical drives parameters * @span : span * - * 8-LD logical drive with upto 8 spans + * 8-LD logical drive with up to 8 spans */ typedef struct { logdrv_param_t lparam; @@ -673,7 +673,7 @@ typedef struct { * @lparam : logical drives parameters * @span : span * - * 8-LD logical drive with upto 4 spans + * 8-LD logical drive with up to 4 spans */ typedef struct { logdrv_param_t lparam; @@ -720,7 +720,7 @@ typedef struct { * @ldrv : logical drives information * @pdrv : physical drives information * - * Disk array for 8LD logical drives with upto 8 spans + * Disk array for 8LD logical drives with up to 8 spans */ typedef struct { uint8_t numldrv; @@ -737,7 +737,7 @@ typedef struct { * @ldrv : logical drives information * @pdrv : physical drives information * - * Disk array for 8LD logical drives with upto 4 spans + * Disk array for 8LD logical drives with up to 4 spans */ typedef struct { uint8_t numldrv; diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c index 5708cb27d07..1dba32870b4 100644 --- a/drivers/scsi/megaraid/megaraid_mbox.c +++ b/drivers/scsi/megaraid/megaraid_mbox.c @@ -2689,7 +2689,7 @@ megaraid_reset_handler(struct scsi_cmnd *scp) (MBOX_RESET_WAIT + MBOX_RESET_EXT_WAIT) - i)); } - // bailout if no recovery happended in reset time + // bailout if no recovery happened in reset time if (adapter->outstanding_cmds == 0) { break; } @@ -3452,7 +3452,7 @@ megaraid_mbox_display_scb(adapter_t *adapter, scb_t *scb) * megaraid_mbox_setup_device_map - manage device ids * @adapter : Driver's soft state * - * Manange the device ids to have an appropraite mapping between the kernel + * Manange the device ids to have an appropriate mapping between the kernel * scsi addresses and megaraid scsi and logical drive addresses. We export * scsi devices on their actual addresses, whereas the logical drives are * exported on a virtual scsi channel. @@ -3973,7 +3973,7 @@ megaraid_sysfs_get_ldmap_timeout(unsigned long data) * NOTE: The commands issuance functionality is not generalized and * implemented in context of "get ld map" command only. If required, the * command issuance logical can be trivially pulled out and implemented as a - * standalone libary. For now, this should suffice since there is no other + * standalone library. For now, this should suffice since there is no other * user of this interface. * * Return 0 on success. diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h index 635b228c3ea..046dcc672ec 100644 --- a/drivers/scsi/megaraid/megaraid_sas.h +++ b/drivers/scsi/megaraid/megaraid_sas.h @@ -1347,7 +1347,7 @@ struct megasas_instance { struct timer_list io_completion_timer; struct list_head internal_reset_pending_q; - /* Ptr to hba specfic information */ + /* Ptr to hba specific information */ void *ctrl_context; u8 msi_flag; struct msix_entry msixentry; diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c index bbd10c81fd9..66d4cea4df9 100644 --- a/drivers/scsi/megaraid/megaraid_sas_base.c +++ b/drivers/scsi/megaraid/megaraid_sas_base.c @@ -1698,7 +1698,7 @@ void megasas_do_ocr(struct megasas_instance *instance) * megasas_wait_for_outstanding - Wait for all outstanding cmds * @instance: Adapter soft state * - * This function waits for upto MEGASAS_RESET_WAIT_TIME seconds for FW to + * This function waits for up to MEGASAS_RESET_WAIT_TIME seconds for FW to * complete all its outstanding commands. Returns error if one or more IOs * are pending after this time period. It also marks the controller dead. */ diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_init.h b/drivers/scsi/mpt2sas/mpi/mpi2_init.h index 20e6b886934..165454d5259 100644 --- a/drivers/scsi/mpt2sas/mpi/mpi2_init.h +++ b/drivers/scsi/mpt2sas/mpi/mpi2_init.h @@ -21,7 +21,7 @@ * 05-21-08 02.00.05 Fixed typo in name of Mpi2SepRequest_t. * 10-02-08 02.00.06 Removed Untagged and No Disconnect values from SCSI IO * Control field Task Attribute flags. - * Moved LUN field defines to mpi2.h becasue they are + * Moved LUN field defines to mpi2.h because they are * common to many structures. * 05-06-09 02.00.07 Changed task management type of Query Unit Attention to * Query Asynchronous Event. diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c index 5e001ffd4c1..3346357031e 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.c +++ b/drivers/scsi/mpt2sas/mpt2sas_base.c @@ -925,7 +925,7 @@ _base_interrupt(int irq, void *bus_id) } /** - * mpt2sas_base_release_callback_handler - clear interupt callback handler + * mpt2sas_base_release_callback_handler - clear interrupt callback handler * @cb_idx: callback index * * Return nothing. @@ -1113,7 +1113,7 @@ _base_restore_msix_table(struct MPT2SAS_ADAPTER *ioc) * @ioc: per adapter object * * Check to see if card is capable of MSIX, and set number - * of avaliable msix vectors + * of available msix vectors */ static int _base_check_enable_msix(struct MPT2SAS_ADAPTER *ioc) @@ -1595,7 +1595,7 @@ mpt2sas_base_put_smid_scsi_io(struct MPT2SAS_ADAPTER *ioc, u16 smid, u16 handle) /** - * mpt2sas_base_put_smid_hi_priority - send Task Managment request to firmware + * mpt2sas_base_put_smid_hi_priority - send Task Management request to firmware * @ioc: per adapter object * @smid: system request message index * @@ -2599,7 +2599,7 @@ _base_wait_for_doorbell_int(struct MPT2SAS_ADAPTER *ioc, int timeout, int_status = readl(&ioc->chip->HostInterruptStatus); if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) { dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: " - "successfull count(%d), timeout(%d)\n", ioc->name, + "successful count(%d), timeout(%d)\n", ioc->name, __func__, count, timeout)); return 0; } @@ -2640,7 +2640,7 @@ _base_wait_for_doorbell_ack(struct MPT2SAS_ADAPTER *ioc, int timeout, int_status = readl(&ioc->chip->HostInterruptStatus); if (!(int_status & MPI2_HIS_SYS2IOC_DB_STATUS)) { dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: " - "successfull count(%d), timeout(%d)\n", ioc->name, + "successful count(%d), timeout(%d)\n", ioc->name, __func__, count, timeout)); return 0; } else if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) { @@ -2688,7 +2688,7 @@ _base_wait_for_doorbell_not_used(struct MPT2SAS_ADAPTER *ioc, int timeout, doorbell_reg = readl(&ioc->chip->Doorbell); if (!(doorbell_reg & MPI2_DOORBELL_USED)) { dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: " - "successfull count(%d), timeout(%d)\n", ioc->name, + "successful count(%d), timeout(%d)\n", ioc->name, __func__, count, timeout)); return 0; } diff --git a/drivers/scsi/mpt2sas/mpt2sas_config.c b/drivers/scsi/mpt2sas/mpt2sas_config.c index 6afd67b324f..6861244249a 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_config.c +++ b/drivers/scsi/mpt2sas/mpt2sas_config.c @@ -93,7 +93,7 @@ struct config_request{ * @mpi_reply: reply message frame * Context: none. * - * Function for displaying debug info helpfull when debugging issues + * Function for displaying debug info helpful when debugging issues * in this module. */ static void diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.c b/drivers/scsi/mpt2sas/mpt2sas_ctl.c index e92b77af548..1c6d2b405ee 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_ctl.c +++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.c @@ -116,7 +116,7 @@ _ctl_sas_device_find_by_handle(struct MPT2SAS_ADAPTER *ioc, u16 handle) * @mpi_reply: reply message frame * Context: none. * - * Function for displaying debug info helpfull when debugging issues + * Function for displaying debug info helpful when debugging issues * in this module. */ static void diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index 6ceb7759bfe..d2064a0533a 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -397,7 +397,7 @@ _scsih_get_sas_address(struct MPT2SAS_ADAPTER *ioc, u16 handle, * @is_raid: [flag] 1 = raid object, 0 = sas object * * Determines whether this device should be first reported device to - * to scsi-ml or sas transport, this purpose is for persistant boot device. + * to scsi-ml or sas transport, this purpose is for persistent boot device. * There are primary, alternate, and current entries in bios page 2. The order * priority is primary, alternate, then current. This routine saves * the corresponding device object and is_raid flag in the ioc object. @@ -2671,10 +2671,10 @@ _scsih_block_io_to_children_attached_directly(struct MPT2SAS_ADAPTER *ioc, * @handle: device handle * Context: interrupt time. * - * This code is to initiate the device removal handshake protocal + * This code is to initiate the device removal handshake protocol * with controller firmware. This function will issue target reset * using high priority request queue. It will send a sas iounit - * controll request (MPI2_SAS_OP_REMOVE_DEVICE) from this completion. + * control request (MPI2_SAS_OP_REMOVE_DEVICE) from this completion. * * This is designed to send muliple task management request at the same * time to the fifo. If the fifo is full, we will append the request, @@ -2749,9 +2749,9 @@ _scsih_tm_tr_send(struct MPT2SAS_ADAPTER *ioc, u16 handle) * @reply: reply message frame(lower 32bit addr) * Context: interrupt time. * - * This is the sas iounit controll completion routine. + * This is the sas iounit control completion routine. * This code is part of the code to initiate the device removal - * handshake protocal with controller firmware. + * handshake protocol with controller firmware. * * Return 1 meaning mf should be freed from _base_interrupt * 0 means the mf is freed from this function. @@ -2878,8 +2878,8 @@ _scsih_tm_volume_tr_complete(struct MPT2SAS_ADAPTER *ioc, u16 smid, * * This is the target reset completion routine. * This code is part of the code to initiate the device removal - * handshake protocal with controller firmware. - * It will send a sas iounit controll request (MPI2_SAS_OP_REMOVE_DEVICE) + * handshake protocol with controller firmware. + * It will send a sas iounit control request (MPI2_SAS_OP_REMOVE_DEVICE) * * Return 1 meaning mf should be freed from _base_interrupt * 0 means the mf is freed from this function. @@ -2984,7 +2984,7 @@ _scsih_check_for_pending_tm(struct MPT2SAS_ADAPTER *ioc, u16 smid) * * This routine added to better handle cable breaker. * - * This handles the case where driver recieves multiple expander + * This handles the case where driver receives multiple expander * add and delete events in a single shot. When there is a delete event * the routine will void any pending add events waiting in the event queue. * @@ -3511,7 +3511,7 @@ _scsih_normalize_sense(char *sense_buffer, struct sense_info *data) #ifdef CONFIG_SCSI_MPT2SAS_LOGGING /** - * _scsih_scsi_ioc_info - translated non-successfull SCSI_IO request + * _scsih_scsi_ioc_info - translated non-successful SCSI_IO request * @ioc: per adapter object * @scmd: pointer to scsi command object * @mpi_reply: reply mf payload returned from firmware @@ -5138,7 +5138,7 @@ _scsih_sas_broadcast_primative_event(struct MPT2SAS_ADAPTER *ioc, unsigned long flags; int r; - dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "broadcast primative: " + dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "broadcast primitive: " "phy number(%d), width(%d)\n", ioc->name, event_data->PhyNum, event_data->PortWidth)); dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter\n", ioc->name, diff --git a/drivers/scsi/ncr53c8xx.c b/drivers/scsi/ncr53c8xx.c index 46cc3825638..835d8d66e69 100644 --- a/drivers/scsi/ncr53c8xx.c +++ b/drivers/scsi/ncr53c8xx.c @@ -2679,7 +2679,7 @@ static struct script script0 __initdata = { }/*-------------------------< RESEL_TAG >-------------------*/,{ /* ** Read IDENTIFY + SIMPLE + TAG using a single MOVE. - ** Agressive optimization, is'nt it? + ** Aggressive optimization, is'nt it? ** No need to test the SIMPLE TAG message, since the ** driver only supports conformant devices for tags. ;-) */ diff --git a/drivers/scsi/nsp32.c b/drivers/scsi/nsp32.c index 6b8b021400f..f6a50c98c36 100644 --- a/drivers/scsi/nsp32.c +++ b/drivers/scsi/nsp32.c @@ -1288,7 +1288,7 @@ static irqreturn_t do_nsp32_isr(int irq, void *dev_id) nsp32_dbg(NSP32_DEBUG_INTR, "SSACK=0x%lx", nsp32_read4(base, SAVED_SACK_CNT)); - scsi_set_resid(SCpnt, 0); /* all data transfered! */ + scsi_set_resid(SCpnt, 0); /* all data transferred! */ } /* @@ -1630,7 +1630,7 @@ static int nsp32_busfree_occur(struct scsi_cmnd *SCpnt, unsigned short execph) /* * If SAVEDSACKCNT == 0, it means SavedDataPointer is - * come after data transfering. + * come after data transferring. */ if (s_sacklen > 0) { /* @@ -1785,7 +1785,7 @@ static void nsp32_adjust_busfree(struct scsi_cmnd *SCpnt, unsigned int s_sacklen the head element of the sg. restlen is correctly calculated. */ } - /* calculate the rest length for transfering */ + /* calculate the rest length for transferring */ restlen = sentlen - s_sacklen; /* update adjusting current SG table entry */ diff --git a/drivers/scsi/nsp32.h b/drivers/scsi/nsp32.h index 9565acf1aa7..c0221829069 100644 --- a/drivers/scsi/nsp32.h +++ b/drivers/scsi/nsp32.h @@ -507,7 +507,7 @@ typedef struct _nsp32_lunt { /* * SCSI TARGET/LUN definition */ -#define NSP32_HOST_SCSIID 7 /* SCSI initiator is everytime defined as 7 */ +#define NSP32_HOST_SCSIID 7 /* SCSI initiator is every time defined as 7 */ #define MAX_TARGET 8 #define MAX_LUN 8 /* XXX: In SPI3, max number of LUN is 64. */ diff --git a/drivers/scsi/osst.c b/drivers/scsi/osst.c index 521e2182d45..58f5be4740e 100644 --- a/drivers/scsi/osst.c +++ b/drivers/scsi/osst.c @@ -1366,7 +1366,7 @@ error: /* The values below are based on the OnStream frame payload size of 32K == 2**15, * that is, OSST_FRAME_SHIFT + OSST_SECTOR_SHIFT must be 15. With a minimum block * size of 512 bytes, we need to be able to resolve 32K/512 == 64 == 2**6 positions - * inside each frame. Finaly, OSST_SECTOR_MASK == 2**OSST_FRAME_SHIFT - 1. + * inside each frame. Finally, OSST_SECTOR_MASK == 2**OSST_FRAME_SHIFT - 1. */ #define OSST_FRAME_SHIFT 6 #define OSST_SECTOR_SHIFT 9 @@ -3131,7 +3131,7 @@ static int osst_flush_write_buffer(struct osst_tape *STp, struct osst_request ** } #if DEBUG if (debugging) - printk(OSST_DEB_MSG "%s:D: Flushing %d bytes, Transfering %d bytes in %d lblocks.\n", + printk(OSST_DEB_MSG "%s:D: Flushing %d bytes, Transferring %d bytes in %d lblocks.\n", name, offset, transfer, blks); #endif @@ -3811,7 +3811,7 @@ static ssize_t osst_read(struct file * filp, char __user * buf, size_t count, lo if (transfer == 0) { printk(KERN_WARNING - "%s:W: Nothing can be transfered, requested %Zd, tape block size (%d%c).\n", + "%s:W: Nothing can be transferred, requested %Zd, tape block size (%d%c).\n", name, count, STp->block_size < 1024? STp->block_size:STp->block_size/1024, STp->block_size<1024?'b':'k'); diff --git a/drivers/scsi/osst.h b/drivers/scsi/osst.h index 11d26c57f3f..b4fea98ba27 100644 --- a/drivers/scsi/osst.h +++ b/drivers/scsi/osst.h @@ -413,7 +413,7 @@ typedef struct os_dat_s { * AUX */ typedef struct os_aux_s { - __be32 format_id; /* hardware compability AUX is based on */ + __be32 format_id; /* hardware compatibility AUX is based on */ char application_sig[4]; /* driver used to write this media */ __be32 hdwr; /* reserved */ __be32 update_frame_cntr; /* for configuration frame */ diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c index be3f33d31a9..54bdf6d85c6 100644 --- a/drivers/scsi/pcmcia/nsp_cs.c +++ b/drivers/scsi/pcmcia/nsp_cs.c @@ -742,7 +742,7 @@ static void nsp_pio_read(struct scsi_cmnd *SCpnt) res = nsp_fifo_count(SCpnt) - ocount; //nsp_dbg(NSP_DEBUG_DATA_IO, "ptr=0x%p this=0x%x ocount=0x%x res=0x%x", SCpnt->SCp.ptr, SCpnt->SCp.this_residual, ocount, res); - if (res == 0) { /* if some data avilable ? */ + if (res == 0) { /* if some data available ? */ if (stat == BUSPHASE_DATA_IN) { /* phase changed? */ //nsp_dbg(NSP_DEBUG_DATA_IO, " wait for data this=%d", SCpnt->SCp.this_residual); continue; diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c index 18b6c55cd08..8b7db1e53c1 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.c +++ b/drivers/scsi/pm8001/pm8001_hwi.c @@ -339,7 +339,7 @@ update_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha, int number) /** * bar4_shift - function is called to shift BAR base address - * @pm8001_ha : our hba card infomation + * @pm8001_ha : our hba card information * @shiftValue : shifting value in memory bar. */ static int bar4_shift(struct pm8001_hba_info *pm8001_ha, u32 shiftValue) diff --git a/drivers/scsi/pm8001/pm8001_hwi.h b/drivers/scsi/pm8001/pm8001_hwi.h index 833a5201eda..909132041c0 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.h +++ b/drivers/scsi/pm8001/pm8001_hwi.h @@ -209,7 +209,7 @@ struct pio_setup_fis { /* * brief the data structure of SATA Completion Response - * use to discribe the sata task response (64 bytes) + * use to describe the sata task response (64 bytes) */ struct sata_completion_resp { __le32 tag; @@ -951,7 +951,7 @@ struct set_dev_state_resp { #define PCIE_EVENT_INTERRUPT 0x003044 #define PCIE_ERROR_INTERRUPT_ENABLE 0x003048 #define PCIE_ERROR_INTERRUPT 0x00304C -/* signature defintion for host scratch pad0 register */ +/* signature definition for host scratch pad0 register */ #define SPC_SOFT_RESET_SIGNATURE 0x252acbcd /* Signature for Soft Reset */ diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h index bdb6b27dedd..aa05e661d11 100644 --- a/drivers/scsi/pm8001/pm8001_sas.h +++ b/drivers/scsi/pm8001/pm8001_sas.h @@ -445,7 +445,7 @@ struct fw_control_info { struct fw_control_ex { struct fw_control_info *fw_control; void *buffer;/* keep buffer pointer to be - freed when the responce comes*/ + freed when the response comes*/ void *virtAddr;/* keep virtual address of the data */ void *usrAddr;/* keep virtual address of the user data */ diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c index bcf858e88c6..96d5ad0c1e4 100644 --- a/drivers/scsi/pmcraid.c +++ b/drivers/scsi/pmcraid.c @@ -213,7 +213,7 @@ static int pmcraid_slave_alloc(struct scsi_device *scsi_dev) * pmcraid_slave_configure - Configures a SCSI device * @scsi_dev: scsi device struct * - * This fucntion is executed by SCSI mid layer just after a device is first + * This function is executed by SCSI mid layer just after a device is first * scanned (i.e. it has responded to an INQUIRY). For VSET resources, the * timeout value (default 30s) will be over-written to a higher value (60s) * and max_sectors value will be over-written to 512. It also sets queue depth @@ -2122,7 +2122,7 @@ static void pmcraid_fail_outstanding_cmds(struct pmcraid_instance *pinstance) * * This function executes most of the steps required for IOA reset. This gets * called by user threads (modprobe/insmod/rmmod) timer, tasklet and midlayer's - * 'eh_' thread. Access to variables used for controling the reset sequence is + * 'eh_' thread. Access to variables used for controlling the reset sequence is * synchronized using host lock. Various functions called during reset process * would make use of a single command block, pointer to which is also stored in * adapter instance structure. @@ -2994,7 +2994,7 @@ static int pmcraid_abort_complete(struct pmcraid_cmd *cancel_cmd) /* If the abort task is not timed out we will get a Good completion * as sense_key, otherwise we may get one the following responses - * due to subsquent bus reset or device reset. In case IOASC is + * due to subsequent bus reset or device reset. In case IOASC is * NR_SYNC_REQUIRED, set sync_reqd flag for the corresponding resource */ if (ioasc == PMCRAID_IOASC_UA_BUS_WAS_RESET || @@ -3933,7 +3933,7 @@ static long pmcraid_ioctl_passthrough( /* if abort task couldn't find the command i.e it got * completed prior to aborting, return good completion. - * if command got aborted succesfully or there was IOA + * if command got aborted successfully or there was IOA * reset due to abort task itself getting timedout then * return -ETIMEDOUT */ @@ -5932,7 +5932,7 @@ static int __devinit pmcraid_probe( * However, firmware supports 64-bit streaming DMA buffers, whereas * coherent buffers are to be 32-bit. Since pci_alloc_consistent always * returns memory within 4GB (if not, change this logic), coherent - * buffers are within firmware acceptible address ranges. + * buffers are within firmware acceptable address ranges. */ if ((sizeof(dma_addr_t) == 4) || pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) diff --git a/drivers/scsi/pmcraid.h b/drivers/scsi/pmcraid.h index 4db210d9394..34e4c915002 100644 --- a/drivers/scsi/pmcraid.h +++ b/drivers/scsi/pmcraid.h @@ -1024,7 +1024,7 @@ static struct pmcraid_ioasc_error pmcraid_ioasc_error_table[] = { /* - * pmcraid_ioctl_header - definition of header structure that preceeds all the + * pmcraid_ioctl_header - definition of header structure that precedes all the * buffers given as ioctl arguments. * * .signature : always ASCII string, "PMCRAID" diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c index 5dec684bf01..8ba5744c267 100644 --- a/drivers/scsi/qla1280.c +++ b/drivers/scsi/qla1280.c @@ -78,7 +78,7 @@ - Clean up vchan handling Rev 3.23.33 July 3, 2003, Jes Sorensen - Don't define register access macros before define determining MMIO. - This just happend to work out on ia64 but not elsewhere. + This just happened to work out on ia64 but not elsewhere. - Don't try and read from the card while it is in reset as it won't respond and causes an MCA Rev 3.23.32 June 23, 2003, Jes Sorensen diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index 6c51c0a35b9..ee20353c855 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -2086,7 +2086,7 @@ struct ct_sns_pkt { }; /* - * SNS command structures -- for 2200 compatability. + * SNS command structures -- for 2200 compatibility. */ #define RFT_ID_SNS_SCMD_LEN 22 #define RFT_ID_SNS_CMD_SIZE 60 diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h index 631fefc8482..f5ba09c8a66 100644 --- a/drivers/scsi/qla2xxx/qla_fw.h +++ b/drivers/scsi/qla2xxx/qla_fw.h @@ -539,7 +539,7 @@ struct sts_entry_24xx { * If DIF Error is set in comp_status, these additional fields are * defined: * &data[10] : uint8_t report_runt_bg[2]; - computed guard - * &data[12] : uint8_t actual_dif[8]; - DIF Data recieved + * &data[12] : uint8_t actual_dif[8]; - DIF Data received * &data[20] : uint8_t expected_dif[8]; - DIF Data computed */ }; diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index d17ed9a94a0..712518d0512 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -414,7 +414,7 @@ skip_rio: "marked OFFLINE!\n"); vha->flags.online = 0; } else { - /* Check to see if MPI timeout occured */ + /* Check to see if MPI timeout occurred */ if ((mbx & MBX_3) && (ha->flags.port0)) set_bit(MPI_RESET_NEEDED, &vha->dpc_flags); diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index 7a7c0ecfe7d..34893397ac8 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -303,7 +303,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) !test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) { qla_printk(KERN_WARNING, ha, - "Mailbox command timeout occured. " + "Mailbox command timeout occurred. " "Scheduling ISP " "abort. eeh_busy: 0x%x\n", ha->flags.eeh_busy); set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags); @@ -321,7 +321,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) !test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) { qla_printk(KERN_WARNING, ha, - "Mailbox command timeout occured. " + "Mailbox command timeout occurred. " "Issuing ISP abort.\n"); set_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags); @@ -3789,7 +3789,7 @@ qla2x00_loopback_test(scsi_qla_host_t *vha, struct msg_echo_lb *mreq, mcp->mb[20] = LSW(MSD(mreq->send_dma)); mcp->mb[21] = MSW(MSD(mreq->send_dma)); - /* recieve data address */ + /* receive data address */ mcp->mb[16] = LSW(mreq->rcv_dma); mcp->mb[17] = MSW(mreq->rcv_dma); mcp->mb[6] = LSW(MSD(mreq->rcv_dma)); diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c index 76ec876e6b2..455fe134d31 100644 --- a/drivers/scsi/qla2xxx/qla_nx.c +++ b/drivers/scsi/qla2xxx/qla_nx.c @@ -2598,7 +2598,7 @@ qla82xx_calc_dsd_lists(uint16_t dsds) * qla82xx_start_scsi() - Send a SCSI command to the ISP * @sp: command to send to the ISP * - * Returns non-zero if a failure occured, else zero. + * Returns non-zero if a failure occurred, else zero. */ int qla82xx_start_scsi(srb_t *sp) diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 75a966c9486..aa774752916 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -1046,7 +1046,7 @@ qla2xxx_eh_bus_reset(struct scsi_cmnd *cmd) eh_bus_reset_done: qla_printk(KERN_INFO, vha->hw, "%s: reset %s\n", __func__, - (ret == FAILED) ? "failed" : "succeded"); + (ret == FAILED) ? "failed" : "succeeded"); return ret; } @@ -1136,7 +1136,7 @@ qla2xxx_eh_host_reset(struct scsi_cmnd *cmd) eh_host_reset_lock: qla_printk(KERN_INFO, ha, "%s: reset %s\n", __func__, - (ret == FAILED) ? "failed" : "succeded"); + (ret == FAILED) ? "failed" : "succeeded"); return ret; } @@ -3902,7 +3902,7 @@ uint32_t qla82xx_error_recovery(scsi_qla_host_t *base_vha) continue; if (atomic_read(&other_pdev->enable_cnt)) { DEBUG17(qla_printk(KERN_INFO, ha, - "Found PCI func availabe and enabled at 0x%x\n", + "Found PCI func available and enabled at 0x%x\n", fn)); pci_dev_put(other_pdev); break; diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h index c1f8d1b150f..4757878d59d 100644 --- a/drivers/scsi/qla4xxx/ql4_def.h +++ b/drivers/scsi/qla4xxx/ql4_def.h @@ -182,7 +182,7 @@ struct srb { uint16_t flags; /* (1) Status flags. */ #define SRB_DMA_VALID BIT_3 /* DMA Buffer mapped. */ -#define SRB_GOT_SENSE BIT_4 /* sense data recieved. */ +#define SRB_GOT_SENSE BIT_4 /* sense data received. */ uint8_t state; /* (1) Status flags. */ #define SRB_NO_QUEUE_STATE 0 /* Request is in between states */ diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c index bbb2e903d38..48e2241ddaf 100644 --- a/drivers/scsi/qla4xxx/ql4_init.c +++ b/drivers/scsi/qla4xxx/ql4_init.c @@ -1338,7 +1338,7 @@ exit_init_hba: } DEBUG2(printk("scsi%ld: initialize adapter: %s\n", ha->host_no, - status == QLA_ERROR ? "FAILED" : "SUCCEDED")); + status == QLA_ERROR ? "FAILED" : "SUCCEEDED")); return status; } diff --git a/drivers/scsi/qla4xxx/ql4_nvram.h b/drivers/scsi/qla4xxx/ql4_nvram.h index b3831bd2947..945cc328f57 100644 --- a/drivers/scsi/qla4xxx/ql4_nvram.h +++ b/drivers/scsi/qla4xxx/ql4_nvram.h @@ -28,7 +28,7 @@ #define FM93C56A_ERASE 0x3 #define FM93C56A_ERASE_ALL 0x0 -/* Command Extentions */ +/* Command Extensions */ #define FM93C56A_WEN_EXT 0x3 #define FM93C56A_WRITE_ALL_EXT 0x1 #define FM93C56A_WDS_EXT 0x0 diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c index a4acb0dd7be..230ba097d28 100644 --- a/drivers/scsi/qla4xxx/ql4_os.c +++ b/drivers/scsi/qla4xxx/ql4_os.c @@ -1213,7 +1213,7 @@ recover_ha_init_adapter: clear_bit(DPC_RESET_ACTIVE, &ha->dpc_flags); DEBUG2(printk("scsi%ld: recover adapter: %s\n", ha->host_no, - status == QLA_ERROR ? "FAILED" : "SUCCEDED")); + status == QLA_ERROR ? "FAILED" : "SUCCEEDED")); return status; } @@ -2110,7 +2110,7 @@ static int qla4xxx_eh_abort(struct scsi_cmnd *cmd) ql4_printk(KERN_INFO, ha, "scsi%ld:%d:%d: Abort command - %s\n", - ha->host_no, id, lun, (ret == SUCCESS) ? "succeded" : "failed"); + ha->host_no, id, lun, (ret == SUCCESS) ? "succeeded" : "failed"); return ret; } @@ -2278,7 +2278,7 @@ static int qla4xxx_eh_host_reset(struct scsi_cmnd *cmd) return_status = SUCCESS; ql4_printk(KERN_INFO, ha, "HOST RESET %s.\n", - return_status == FAILED ? "FAILED" : "SUCCEDED"); + return_status == FAILED ? "FAILED" : "SUCCEEDED"); return return_status; } @@ -2492,7 +2492,7 @@ qla4xxx_pci_slot_reset(struct pci_dev *pdev) /* Initialize device or resume if in suspended state */ rc = pci_enable_device(pdev); if (rc) { - ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: Cant re-enable " + ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: Can't re-enable " "device after reset\n", ha->host_no, __func__); goto exit_slot_reset; } diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c index fa5758cbded..6888b2ca5bf 100644 --- a/drivers/scsi/scsi_debug.c +++ b/drivers/scsi/scsi_debug.c @@ -2454,7 +2454,7 @@ static void scsi_debug_slave_destroy(struct scsi_device *sdp) printk(KERN_INFO "scsi_debug: slave_destroy <%u %u %u %u>\n", sdp->host->host_no, sdp->channel, sdp->id, sdp->lun); if (devip) { - /* make this slot avaliable for re-use */ + /* make this slot available for re-use */ devip->used = 0; sdp->hostdata = NULL; } diff --git a/drivers/scsi/scsi_netlink.c b/drivers/scsi/scsi_netlink.c index a2ed201885a..26a8a45584e 100644 --- a/drivers/scsi/scsi_netlink.c +++ b/drivers/scsi/scsi_netlink.c @@ -499,7 +499,7 @@ scsi_netlink_init(void) SCSI_NL_GRP_CNT, scsi_nl_rcv_msg, NULL, THIS_MODULE); if (!scsi_nl_sock) { - printk(KERN_ERR "%s: register of recieve handler failed\n", + printk(KERN_ERR "%s: register of receive handler failed\n", __func__); netlink_unregister_notifier(&scsi_netlink_notifier); return; diff --git a/drivers/scsi/scsi_tgt_lib.c b/drivers/scsi/scsi_tgt_lib.c index f67282058ba..8bca8c25ba6 100644 --- a/drivers/scsi/scsi_tgt_lib.c +++ b/drivers/scsi/scsi_tgt_lib.c @@ -93,7 +93,7 @@ struct scsi_cmnd *scsi_host_get_command(struct Scsi_Host *shost, /* * The blk helpers are used to the READ/WRITE requests - * transfering data from a initiator point of view. Since + * transferring data from a initiator point of view. Since * we are in target mode we want the opposite. */ rq = blk_get_request(shost->uspace_req_q, !write, gfp_mask); diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c index 2941d2d92c9..fdf3fa63905 100644 --- a/drivers/scsi/scsi_transport_fc.c +++ b/drivers/scsi/scsi_transport_fc.c @@ -2378,7 +2378,7 @@ fc_flush_devloss(struct Scsi_Host *shost) * fc_remove_host - called to terminate any fc_transport-related elements for a scsi host. * @shost: Which &Scsi_Host * - * This routine is expected to be called immediately preceeding the + * This routine is expected to be called immediately preceding the * a driver's call to scsi_remove_host(). * * WARNING: A driver utilizing the fc_transport, which fails to call @@ -2458,7 +2458,7 @@ static void fc_terminate_rport_io(struct fc_rport *rport) } /** - * fc_starget_delete - called to delete the scsi decendents of an rport + * fc_starget_delete - called to delete the scsi descendants of an rport * @work: remote port to be operated on. * * Deletes target and all sdevs. diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index b61ebec6bca..bd0806e64e8 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -1055,7 +1055,7 @@ static int sd_getgeo(struct block_device *bdev, struct hd_geometry *geo) * @arg: this is third argument given to ioctl(2) system call. * Often contains a pointer. * - * Returns 0 if successful (some ioctls return postive numbers on + * Returns 0 if successful (some ioctls return positive numbers on * success as well). Returns a negated errno value in case of error. * * Note: most ioctls are forward onto the block subsystem or further diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c index aefadc6a160..95019c747cc 100644 --- a/drivers/scsi/sr.c +++ b/drivers/scsi/sr.c @@ -567,7 +567,7 @@ static const struct block_device_operations sr_bdops = .revalidate_disk = sr_block_revalidate_disk, /* * No compat_ioctl for now because sr_block_ioctl never - * seems to pass arbitary ioctls down to host drivers. + * seems to pass arbitrary ioctls down to host drivers. */ }; diff --git a/drivers/scsi/sun3_NCR5380.c b/drivers/scsi/sun3_NCR5380.c index 4f0e5485ffd..07eaef1c722 100644 --- a/drivers/scsi/sun3_NCR5380.c +++ b/drivers/scsi/sun3_NCR5380.c @@ -467,7 +467,7 @@ static void free_all_tags( void ) * * Parameters: struct scsi_cmnd *cmd * The command to work on. The first scatter buffer's data are - * assumed to be already transfered into ptr/this_residual. + * assumed to be already transferred into ptr/this_residual. */ static void merge_contiguous_buffers(struct scsi_cmnd *cmd) @@ -1717,7 +1717,7 @@ static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd, * bytes to transfer, **data - pointer to data pointer. * * Returns : -1 when different phase is entered without transferring - * maximum number of bytes, 0 if all bytes are transfered or exit + * maximum number of bytes, 0 if all bytes are transferred or exit * is in same phase. * * Also, *phase, *count, *data are modified in place. @@ -1904,7 +1904,7 @@ static int do_abort (struct Scsi_Host *host) * bytes to transfer, **data - pointer to data pointer. * * Returns : -1 when different phase is entered without transferring - * maximum number of bytes, 0 if all bytes or transfered or exit + * maximum number of bytes, 0 if all bytes or transferred or exit * is in same phase. * * Also, *phase, *count, *data are modified in place. diff --git a/drivers/scsi/sym53c416.c b/drivers/scsi/sym53c416.c index 190107ae120..012c86edd59 100644 --- a/drivers/scsi/sym53c416.c +++ b/drivers/scsi/sym53c416.c @@ -774,7 +774,7 @@ static int sym53c416_host_reset(Scsi_Cmnd *SCpnt) /* printk("sym53c416_reset\n"); */ base = SCpnt->device->host->io_port; - /* search scsi_id - fixme, we shouldnt need to iterate for this! */ + /* search scsi_id - fixme, we shouldn't need to iterate for this! */ for(i = 0; i < host_index && scsi_id == -1; i++) if(hosts[i].base == base) scsi_id = hosts[i].scsi_id; diff --git a/drivers/scsi/sym53c8xx_2/sym_fw1.h b/drivers/scsi/sym53c8xx_2/sym_fw1.h index 7b08d6caaa9..63952ee300b 100644 --- a/drivers/scsi/sym53c8xx_2/sym_fw1.h +++ b/drivers/scsi/sym53c8xx_2/sym_fw1.h @@ -1449,7 +1449,7 @@ static struct SYM_FWB_SCR SYM_FWB_SCR = { PADDR_B (msg_weird_seen), /* * We donnot handle extended messages from SCRIPTS. - * Read the amount of data correponding to the + * Read the amount of data corresponding to the * message length and call the C code. */ SCR_COPY (1), diff --git a/drivers/scsi/sym53c8xx_2/sym_fw2.h b/drivers/scsi/sym53c8xx_2/sym_fw2.h index ae1fb179b88..c87d72443a1 100644 --- a/drivers/scsi/sym53c8xx_2/sym_fw2.h +++ b/drivers/scsi/sym53c8xx_2/sym_fw2.h @@ -1326,7 +1326,7 @@ static struct SYM_FWB_SCR SYM_FWB_SCR = { PADDR_B (msg_weird_seen), /* * We donnot handle extended messages from SCRIPTS. - * Read the amount of data correponding to the + * Read the amount of data corresponding to the * message length and call the C code. */ SCR_STORE_REL (scratcha, 1), diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.c b/drivers/scsi/sym53c8xx_2/sym_hipd.c index 2c3e89ddf06..d92fe4037e9 100644 --- a/drivers/scsi/sym53c8xx_2/sym_hipd.c +++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c @@ -2457,7 +2457,7 @@ static void sym_int_ma (struct sym_hcb *np) } /* - * The data in the dma fifo has not been transfered to + * The data in the dma fifo has not been transferred to * the target -> add the amount to the rest * and clear the data. * Check the sstat2 register in case of wide transfer. @@ -5094,7 +5094,7 @@ fail: } /* - * Lun control block deallocation. Returns the number of valid remaing LCBs + * Lun control block deallocation. Returns the number of valid remaining LCBs * for the target. */ int sym_free_lcb(struct sym_hcb *np, u_char tn, u_char ln) diff --git a/drivers/scsi/sym53c8xx_2/sym_malloc.c b/drivers/scsi/sym53c8xx_2/sym_malloc.c index 883cac10daf..6f9af0de7ec 100644 --- a/drivers/scsi/sym53c8xx_2/sym_malloc.c +++ b/drivers/scsi/sym53c8xx_2/sym_malloc.c @@ -50,7 +50,7 @@ * from the SCRIPTS code. In addition, cache line alignment * is guaranteed for power of 2 cache line size. * - * This allocator has been developped for the Linux sym53c8xx + * This allocator has been developed for the Linux sym53c8xx * driver, since this O/S does not provide naturally aligned * allocations. * It has the advantage of allowing the driver to use private diff --git a/drivers/scsi/wd33c93.c b/drivers/scsi/wd33c93.c index 5f697e0bd00..4468ae3610f 100644 --- a/drivers/scsi/wd33c93.c +++ b/drivers/scsi/wd33c93.c @@ -1843,7 +1843,7 @@ check_setup_args(char *key, int *flags, int *val, char *buf) * * The original driver used to rely on a fixed sx_table, containing periods * for (only) the lower limits of the respective input-clock-frequency ranges - * (8-10/12-15/16-20 MHz). Although it seems, that no problems ocurred with + * (8-10/12-15/16-20 MHz). Although it seems, that no problems occurred with * this setting so far, it might be desirable to adjust the transfer periods * closer to the really attached, possibly 25% higher, input-clock, since * - the wd33c93 may really use a significant shorter period, than it has diff --git a/drivers/scsi/wd7000.c b/drivers/scsi/wd7000.c index db451ae0a36..9ee0afef2d1 100644 --- a/drivers/scsi/wd7000.c +++ b/drivers/scsi/wd7000.c @@ -837,7 +837,7 @@ static inline Scb *alloc_scbs(struct Scsi_Host *host, int needed) } } - /* Take the lock, then check we didnt get beaten, if so try again */ + /* Take the lock, then check we didn't get beaten, if so try again */ spin_lock_irqsave(&scbpool_lock, flags); if (freescbs < needed) { spin_unlock_irqrestore(&scbpool_lock, flags); |