diff options
Diffstat (limited to 'drivers/scsi')
43 files changed, 8086 insertions, 1553 deletions
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 81ccbd7f9e3..26be540d1dd 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -888,6 +888,25 @@ config SCSI_IBMVSCSIS To compile this driver as a module, choose M here: the module will be called ibmvstgt. +config SCSI_IBMVFC + tristate "IBM Virtual FC support" + depends on PPC_PSERIES && SCSI + select SCSI_FC_ATTRS + help + This is the IBM POWER Virtual FC Client + + To compile this driver as a module, choose M here: the + module will be called ibmvfc. + +config SCSI_IBMVFC_TRACE + bool "enable driver internal trace" + depends on SCSI_IBMVFC + default y + help + If you say Y here, the driver will trace all commands issued + to the adapter. Performance impact is minimal. Trace can be + dumped using /sys/class/scsi_host/hostXX/trace. + config SCSI_INITIO tristate "Initio 9100U(W) support" depends on PCI && SCSI @@ -1738,10 +1757,12 @@ config SCSI_SUNESP select SCSI_SPI_ATTRS help This is the driver for the Sun ESP SCSI host adapter. The ESP - chipset is present in most SPARC SBUS-based computers. + chipset is present in most SPARC SBUS-based computers and + supports the Emulex family of ESP SCSI chips (esp100, esp100A, + esp236, fas101, fas236) as well as the Qlogic fas366 SCSI chip. To compile this driver as a module, choose M here: the - module will be called esp. + module will be called sun_esp. config ZFCP tristate "FCP host bus adapter driver for IBM eServer zSeries" @@ -1771,4 +1792,6 @@ endif # SCSI_LOWLEVEL source "drivers/scsi/pcmcia/Kconfig" +source "drivers/scsi/device_handler/Kconfig" + endmenu diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index 6c775e350c9..a8149677de2 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -34,6 +34,7 @@ obj-$(CONFIG_SCSI_ISCSI_ATTRS) += scsi_transport_iscsi.o obj-$(CONFIG_SCSI_SAS_ATTRS) += scsi_transport_sas.o obj-$(CONFIG_SCSI_SAS_LIBSAS) += libsas/ obj-$(CONFIG_SCSI_SRP_ATTRS) += scsi_transport_srp.o +obj-$(CONFIG_SCSI_DH) += device_handler/ obj-$(CONFIG_ISCSI_TCP) += libiscsi.o iscsi_tcp.o obj-$(CONFIG_INFINIBAND_ISER) += libiscsi.o @@ -118,6 +119,7 @@ obj-$(CONFIG_SCSI_IPR) += ipr.o obj-$(CONFIG_SCSI_SRP) += libsrp.o obj-$(CONFIG_SCSI_IBMVSCSI) += ibmvscsi/ obj-$(CONFIG_SCSI_IBMVSCSIS) += ibmvscsi/ +obj-$(CONFIG_SCSI_IBMVFC) += ibmvscsi/ obj-$(CONFIG_SCSI_HPTIOP) += hptiop.o obj-$(CONFIG_SCSI_STEX) += stex.o obj-$(CONFIG_SCSI_MVSAS) += mvsas.o diff --git a/drivers/scsi/aacraid/commctrl.c b/drivers/scsi/aacraid/commctrl.c index 5fd83deab36..a7355260cfc 100644 --- a/drivers/scsi/aacraid/commctrl.c +++ b/drivers/scsi/aacraid/commctrl.c @@ -41,6 +41,7 @@ #include <linux/kthread.h> #include <linux/semaphore.h> #include <asm/uaccess.h> +#include <scsi/scsi_host.h> #include "aacraid.h" @@ -581,6 +582,14 @@ static int aac_send_raw_srb(struct aac_dev* dev, void __user * arg) for (i = 0; i < upsg->count; i++) { u64 addr; void* p; + if (upsg->sg[i].count > + (dev->adapter_info.options & + AAC_OPT_NEW_COMM) ? + (dev->scsi_host_ptr->max_sectors << 9) : + 65536) { + rcode = -EINVAL; + goto cleanup; + } /* Does this really need to be GFP_DMA? */ p = kmalloc(upsg->sg[i].count,GFP_KERNEL|__GFP_DMA); if(!p) { @@ -625,6 +634,14 @@ static int aac_send_raw_srb(struct aac_dev* dev, void __user * arg) for (i = 0; i < usg->count; i++) { u64 addr; void* p; + if (usg->sg[i].count > + (dev->adapter_info.options & + AAC_OPT_NEW_COMM) ? + (dev->scsi_host_ptr->max_sectors << 9) : + 65536) { + rcode = -EINVAL; + goto cleanup; + } /* Does this really need to be GFP_DMA? */ p = kmalloc(usg->sg[i].count,GFP_KERNEL|__GFP_DMA); if(!p) { @@ -667,6 +684,14 @@ static int aac_send_raw_srb(struct aac_dev* dev, void __user * arg) for (i = 0; i < upsg->count; i++) { uintptr_t addr; void* p; + if (usg->sg[i].count > + (dev->adapter_info.options & + AAC_OPT_NEW_COMM) ? + (dev->scsi_host_ptr->max_sectors << 9) : + 65536) { + rcode = -EINVAL; + goto cleanup; + } /* Does this really need to be GFP_DMA? */ p = kmalloc(usg->sg[i].count,GFP_KERNEL|__GFP_DMA); if(!p) { @@ -698,6 +723,14 @@ static int aac_send_raw_srb(struct aac_dev* dev, void __user * arg) for (i = 0; i < upsg->count; i++) { dma_addr_t addr; void* p; + if (upsg->sg[i].count > + (dev->adapter_info.options & + AAC_OPT_NEW_COMM) ? + (dev->scsi_host_ptr->max_sectors << 9) : + 65536) { + rcode = -EINVAL; + goto cleanup; + } p = kmalloc(upsg->sg[i].count, GFP_KERNEL); if (!p) { dprintk((KERN_DEBUG"aacraid: Could not allocate SG buffer - size = %d buffer number %d of %d\n", diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c index 68c140e8267..9aa301c1ed0 100644 --- a/drivers/scsi/aacraid/linit.c +++ b/drivers/scsi/aacraid/linit.c @@ -865,7 +865,7 @@ static ssize_t aac_show_bios_version(struct device *device, return len; } -ssize_t aac_show_serial_number(struct device *device, +static ssize_t aac_show_serial_number(struct device *device, struct device_attribute *attr, char *buf) { struct aac_dev *dev = (struct aac_dev*)class_to_shost(device)->hostdata; diff --git a/drivers/scsi/device_handler/Kconfig b/drivers/scsi/device_handler/Kconfig new file mode 100644 index 00000000000..2adc0f666b6 --- /dev/null +++ b/drivers/scsi/device_handler/Kconfig @@ -0,0 +1,32 @@ +# +# SCSI Device Handler configuration +# + +menuconfig SCSI_DH + tristate "SCSI Device Handlers" + depends on SCSI + default n + help + SCSI Device Handlers provide device specific support for + devices utilized in multipath configurations. Say Y here to + select support for specific hardware. + +config SCSI_DH_RDAC + tristate "LSI RDAC Device Handler" + depends on SCSI_DH + help + If you have a LSI RDAC select y. Otherwise, say N. + +config SCSI_DH_HP_SW + tristate "HP/COMPAQ MSA Device Handler" + depends on SCSI_DH + help + If you have a HP/COMPAQ MSA device that requires START_STOP to + be sent to start it and cannot upgrade the firmware then select y. + Otherwise, say N. + +config SCSI_DH_EMC + tristate "EMC CLARiiON Device Handler" + depends on SCSI_DH + help + If you have a EMC CLARiiON select y. Otherwise, say N. diff --git a/drivers/scsi/device_handler/Makefile b/drivers/scsi/device_handler/Makefile new file mode 100644 index 00000000000..35272e93b1c --- /dev/null +++ b/drivers/scsi/device_handler/Makefile @@ -0,0 +1,7 @@ +# +# SCSI Device Handler +# +obj-$(CONFIG_SCSI_DH) += scsi_dh.o +obj-$(CONFIG_SCSI_DH_RDAC) += scsi_dh_rdac.o +obj-$(CONFIG_SCSI_DH_HP_SW) += scsi_dh_hp_sw.o +obj-$(CONFIG_SCSI_DH_EMC) += scsi_dh_emc.o diff --git a/drivers/scsi/device_handler/scsi_dh.c b/drivers/scsi/device_handler/scsi_dh.c new file mode 100644 index 00000000000..ab6c21cd968 --- /dev/null +++ b/drivers/scsi/device_handler/scsi_dh.c @@ -0,0 +1,162 @@ +/* + * SCSI device handler infrastruture. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright IBM Corporation, 2007 + * Authors: + * Chandra Seetharaman <sekharan@us.ibm.com> + * Mike Anderson <andmike@linux.vnet.ibm.com> + */ + +#include <scsi/scsi_dh.h> +#include "../scsi_priv.h" + +static DEFINE_SPINLOCK(list_lock); +static LIST_HEAD(scsi_dh_list); + +static struct scsi_device_handler *get_device_handler(const char *name) +{ + struct scsi_device_handler *tmp, *found = NULL; + + spin_lock(&list_lock); + list_for_each_entry(tmp, &scsi_dh_list, list) { + if (!strcmp(tmp->name, name)) { + found = tmp; + break; + } + } + spin_unlock(&list_lock); + return found; +} + +static int scsi_dh_notifier_add(struct device *dev, void *data) +{ + struct scsi_device_handler *scsi_dh = data; + + scsi_dh->nb.notifier_call(&scsi_dh->nb, BUS_NOTIFY_ADD_DEVICE, dev); + return 0; +} + +/* + * scsi_register_device_handler - register a device handler personality + * module. + * @scsi_dh - device handler to be registered. + * + * Returns 0 on success, -EBUSY if handler already registered. + */ +int scsi_register_device_handler(struct scsi_device_handler *scsi_dh) +{ + int ret = -EBUSY; + struct scsi_device_handler *tmp; + + tmp = get_device_handler(scsi_dh->name); + if (tmp) + goto done; + + ret = bus_register_notifier(&scsi_bus_type, &scsi_dh->nb); + + bus_for_each_dev(&scsi_bus_type, NULL, scsi_dh, scsi_dh_notifier_add); + spin_lock(&list_lock); + list_add(&scsi_dh->list, &scsi_dh_list); + spin_unlock(&list_lock); + +done: + return ret; +} +EXPORT_SYMBOL_GPL(scsi_register_device_handler); + +static int scsi_dh_notifier_remove(struct device *dev, void *data) +{ + struct scsi_device_handler *scsi_dh = data; + + scsi_dh->nb.notifier_call(&scsi_dh->nb, BUS_NOTIFY_DEL_DEVICE, dev); + return 0; +} + +/* + * scsi_unregister_device_handler - register a device handler personality + * module. + * @scsi_dh - device handler to be unregistered. + * + * Returns 0 on success, -ENODEV if handler not registered. + */ +int scsi_unregister_device_handler(struct scsi_device_handler *scsi_dh) +{ + int ret = -ENODEV; + struct scsi_device_handler *tmp; + + tmp = get_device_handler(scsi_dh->name); + if (!tmp) + goto done; + + ret = bus_unregister_notifier(&scsi_bus_type, &scsi_dh->nb); + + bus_for_each_dev(&scsi_bus_type, NULL, scsi_dh, + scsi_dh_notifier_remove); + spin_lock(&list_lock); + list_del(&scsi_dh->list); + spin_unlock(&list_lock); + +done: + return ret; +} +EXPORT_SYMBOL_GPL(scsi_unregister_device_handler); + +/* + * scsi_dh_activate - activate the path associated with the scsi_device + * corresponding to the given request queue. + * @q - Request queue that is associated with the scsi_device to be + * activated. + */ +int scsi_dh_activate(struct request_queue *q) +{ + int err = 0; + unsigned long flags; + struct scsi_device *sdev; + struct scsi_device_handler *scsi_dh = NULL; + + spin_lock_irqsave(q->queue_lock, flags); + sdev = q->queuedata; + if (sdev && sdev->scsi_dh_data) + scsi_dh = sdev->scsi_dh_data->scsi_dh; + if (!scsi_dh || !get_device(&sdev->sdev_gendev)) + err = SCSI_DH_NOSYS; + spin_unlock_irqrestore(q->queue_lock, flags); + + if (err) + return err; + + if (scsi_dh->activate) + err = scsi_dh->activate(sdev); + put_device(&sdev->sdev_gendev); + return err; +} +EXPORT_SYMBOL_GPL(scsi_dh_activate); + +/* + * scsi_dh_handler_exist - Return TRUE(1) if a device handler exists for + * the given name. FALSE(0) otherwise. + * @name - name of the device handler. + */ +int scsi_dh_handler_exist(const char *name) +{ + return (get_device_handler(name) != NULL); +} +EXPORT_SYMBOL_GPL(scsi_dh_handler_exist); + +MODULE_DESCRIPTION("SCSI device handler"); +MODULE_AUTHOR("Chandra Seetharaman <sekharan@us.ibm.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/scsi/device_handler/scsi_dh_emc.c b/drivers/scsi/device_handler/scsi_dh_emc.c new file mode 100644 index 00000000000..ed53f14007a --- /dev/null +++ b/drivers/scsi/device_handler/scsi_dh_emc.c @@ -0,0 +1,499 @@ +/* + * Target driver for EMC CLARiiON AX/CX-series hardware. + * Based on code from Lars Marowsky-Bree <lmb@suse.de> + * and Ed Goggin <egoggin@emc.com>. + * + * Copyright (C) 2006 Red Hat, Inc. All rights reserved. + * Copyright (C) 2006 Mike Christie + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include <scsi/scsi.h> +#include <scsi/scsi_eh.h> +#include <scsi/scsi_dh.h> +#include <scsi/scsi_device.h> + +#define CLARIION_NAME "emc_clariion" + +#define CLARIION_TRESPASS_PAGE 0x22 +#define CLARIION_BUFFER_SIZE 0x80 +#define CLARIION_TIMEOUT (60 * HZ) +#define CLARIION_RETRIES 3 +#define CLARIION_UNBOUND_LU -1 + +static unsigned char long_trespass[] = { + 0, 0, 0, 0, + CLARIION_TRESPASS_PAGE, /* Page code */ + 0x09, /* Page length - 2 */ + 0x81, /* Trespass code + Honor reservation bit */ + 0xff, 0xff, /* Trespass target */ + 0, 0, 0, 0, 0, 0 /* Reserved bytes / unknown */ +}; + +static unsigned char long_trespass_hr[] = { + 0, 0, 0, 0, + CLARIION_TRESPASS_PAGE, /* Page code */ + 0x09, /* Page length - 2 */ + 0x01, /* Trespass code + Honor reservation bit */ + 0xff, 0xff, /* Trespass target */ + 0, 0, 0, 0, 0, 0 /* Reserved bytes / unknown */ +}; + +static unsigned char short_trespass[] = { + 0, 0, 0, 0, + CLARIION_TRESPASS_PAGE, /* Page code */ + 0x02, /* Page length - 2 */ + 0x81, /* Trespass code + Honor reservation bit */ + 0xff, /* Trespass target */ +}; + +static unsigned char short_trespass_hr[] = { + 0, 0, 0, 0, + CLARIION_TRESPASS_PAGE, /* Page code */ + 0x02, /* Page length - 2 */ + 0x01, /* Trespass code + Honor reservation bit */ + 0xff, /* Trespass target */ +}; + +struct clariion_dh_data { + /* + * Use short trespass command (FC-series) or the long version + * (default for AX/CX CLARiiON arrays). + */ + unsigned short_trespass; + /* + * Whether or not (default) to honor SCSI reservations when + * initiating a switch-over. + */ + unsigned hr; + /* I/O buffer for both MODE_SELECT and INQUIRY commands. */ + char buffer[CLARIION_BUFFER_SIZE]; + /* + * SCSI sense buffer for commands -- assumes serial issuance + * and completion sequence of all commands for same multipath. + */ + unsigned char sense[SCSI_SENSE_BUFFERSIZE]; + /* which SP (A=0,B=1,UNBOUND=-1) is dflt SP for path's mapped dev */ + int default_sp; + /* which SP (A=0,B=1,UNBOUND=-1) is active for path's mapped dev */ + int current_sp; +}; + +static inline struct clariion_dh_data + *get_clariion_data(struct scsi_device *sdev) +{ + struct scsi_dh_data *scsi_dh_data = sdev->scsi_dh_data; + BUG_ON(scsi_dh_data == NULL); + return ((struct clariion_dh_data *) scsi_dh_data->buf); +} + +/* + * Parse MODE_SELECT cmd reply. + */ +static int trespass_endio(struct scsi_device *sdev, int result) +{ + int err = SCSI_DH_OK; + struct scsi_sense_hdr sshdr; + struct clariion_dh_data *csdev = get_clariion_data(sdev); + char *sense = csdev->sense; + + if (status_byte(result) == CHECK_CONDITION && + scsi_normalize_sense(sense, SCSI_SENSE_BUFFERSIZE, &sshdr)) { + sdev_printk(KERN_ERR, sdev, "Found valid sense data 0x%2x, " + "0x%2x, 0x%2x while sending CLARiiON trespass " + "command.\n", sshdr.sense_key, sshdr.asc, + sshdr.ascq); + + if ((sshdr.sense_key == 0x05) && (sshdr.asc == 0x04) && + (sshdr.ascq == 0x00)) { + /* + * Array based copy in progress -- do not send + * mode_select or copy will be aborted mid-stream. + */ + sdev_printk(KERN_INFO, sdev, "Array Based Copy in " + "progress while sending CLARiiON trespass " + "command.\n"); + err = SCSI_DH_DEV_TEMP_BUSY; + } else if ((sshdr.sense_key == 0x02) && (sshdr.asc == 0x04) && + (sshdr.ascq == 0x03)) { + /* + * LUN Not Ready - Manual Intervention Required + * indicates in-progress ucode upgrade (NDU). + */ + sdev_printk(KERN_INFO, sdev, "Detected in-progress " + "ucode upgrade NDU operation while sending " + "CLARiiON trespass command.\n"); + err = SCSI_DH_DEV_TEMP_BUSY; + } else + err = SCSI_DH_DEV_FAILED; + } else if (result) { + sdev_printk(KERN_ERR, sdev, "Error 0x%x while sending " + "CLARiiON trespass command.\n", result); + err = SCSI_DH_IO; + } + + return err; +} + +static int parse_sp_info_reply(struct scsi_device *sdev, int result, + int *default_sp, int *current_sp, int *new_current_sp) +{ + int err = SCSI_DH_OK; + struct clariion_dh_data *csdev = get_clariion_data(sdev); + + if (result == 0) { + /* check for in-progress ucode upgrade (NDU) */ + if (csdev->buffer[48] != 0) { + sdev_printk(KERN_NOTICE, sdev, "Detected in-progress " + "ucode upgrade NDU operation while finding " + "current active SP."); + err = SCSI_DH_DEV_TEMP_BUSY; + } else { + *default_sp = csdev->buffer[5]; + + if (csdev->buffer[4] == 2) + /* SP for path is current */ + *current_sp = csdev->buffer[8]; + else { + if (csdev->buffer[4] == 1) + /* SP for this path is NOT current */ + if (csdev->buffer[8] == 0) + *current_sp = 1; + else + *current_sp = 0; + else + /* unbound LU or LUNZ */ + *current_sp = CLARIION_UNBOUND_LU; + } + *new_current_sp = csdev->buffer[8]; + } + } else { + struct scsi_sense_hdr sshdr; + + err = SCSI_DH_IO; + + if (scsi_normalize_sense(csdev->sense, SCSI_SENSE_BUFFERSIZE, + &sshdr)) + sdev_printk(KERN_ERR, sdev, "Found valid sense data " + "0x%2x, 0x%2x, 0x%2x while finding current " + "active SP.", sshdr.sense_key, sshdr.asc, + sshdr.ascq); + else + sdev_printk(KERN_ERR, sdev, "Error 0x%x finding " + "current active SP.", result); + } + + return err; +} + +static int sp_info_endio(struct scsi_device *sdev, int result, + int mode_select_sent, int *done) +{ + struct clariion_dh_data *csdev = get_clariion_data(sdev); + int err_flags, default_sp, current_sp, new_current_sp; + + err_flags = parse_sp_info_reply(sdev, result, &default_sp, + ¤t_sp, &new_current_sp); + + if (err_flags != SCSI_DH_OK) + goto done; + + if (mode_select_sent) { + csdev->default_sp = default_sp; + csdev->current_sp = current_sp; + } else { + /* + * Issue the actual module_selec request IFF either + * (1) we do not know the identity of the current SP OR + * (2) what we think we know is actually correct. + */ + if ((current_sp != CLARIION_UNBOUND_LU) && + (new_current_sp != current_sp)) { + + csdev->default_sp = default_sp; + csdev->current_sp = current_sp; + + sdev_printk(KERN_INFO, sdev, "Ignoring path group " + "switch-over command for CLARiiON SP%s since " + " mapped device is already initialized.", + current_sp ? "B" : "A"); + if (done) + *done = 1; /* as good as doing it */ + } + } +done: + return err_flags; +} + +/* +* Get block request for REQ_BLOCK_PC command issued to path. Currently +* limited to MODE_SELECT (trespass) and INQUIRY (VPD page 0xC0) commands. +* +* Uses data and sense buffers in hardware handler context structure and +* assumes serial servicing of commands, both issuance and completion. +*/ +static struct request *get_req(struct scsi_device *sdev, int cmd) +{ + struct clariion_dh_data *csdev = get_clariion_data(sdev); + struct request *rq; + unsigned char *page22; + int len = 0; + + rq = blk_get_request(sdev->request_queue, + (cmd == MODE_SELECT) ? WRITE : READ, GFP_ATOMIC); + if (!rq) { + sdev_printk(KERN_INFO, sdev, "get_req: blk_get_request failed"); + return NULL; + } + + memset(&rq->cmd, 0, BLK_MAX_CDB); + rq->cmd[0] = cmd; + rq->cmd_len = COMMAND_SIZE(rq->cmd[0]); + + switch (cmd) { + case MODE_SELECT: + if (csdev->short_trespass) { + page22 = csdev->hr ? short_trespass_hr : short_trespass; + len = sizeof(short_trespass); + } else { + page22 = csdev->hr ? long_trespass_hr : long_trespass; + len = sizeof(long_trespass); + } + /* + * Can't DMA from kernel BSS -- must copy selected trespass + * command mode page contents to context buffer which is + * allocated by kmalloc. + */ + BUG_ON((len > CLARIION_BUFFER_SIZE)); + memcpy(csdev->buffer, page22, len); + rq->cmd_flags |= REQ_RW; + rq->cmd[1] = 0x10; + break; + case INQUIRY: + rq->cmd[1] = 0x1; + rq->cmd[2] = 0xC0; + len = CLARIION_BUFFER_SIZE; + memset(csdev->buffer, 0, CLARIION_BUFFER_SIZE); + break; + default: + BUG_ON(1); + break; + } + + rq->cmd[4] = len; + rq->cmd_type = REQ_TYPE_BLOCK_PC; + rq->cmd_flags |= REQ_FAILFAST; + rq->timeout = CLARIION_TIMEOUT; + rq->retries = CLARIION_RETRIES; + + rq->sense = csdev->sense; + memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE); + rq->sense_len = 0; + + if (blk_rq_map_kern(sdev->request_queue, rq, csdev->buffer, + len, GFP_ATOMIC)) { + __blk_put_request(rq->q, rq); + return NULL; + } + + return rq; +} + +static int send_cmd(struct scsi_device *sdev, int cmd) +{ + struct request *rq = get_req(sdev, cmd); + + if (!rq) + return SCSI_DH_RES_TEMP_UNAVAIL; + + return blk_execute_rq(sdev->request_queue, NULL, rq, 1); +} + +static int clariion_activate(struct scsi_device *sdev) +{ + int result, done = 0; + + result = send_cmd(sdev, INQUIRY); + result = sp_info_endio(sdev, result, 0, &done); + if (result || done) + goto done; + + result = send_cmd(sdev, MODE_SELECT); + result = trespass_endio(sdev, result); + if (result) + goto done; + + result = send_cmd(sdev, INQUIRY); + result = sp_info_endio(sdev, result, 1, NULL); +done: + return result; +} + +static int clariion_check_sense(struct scsi_device *sdev, + struct scsi_sense_hdr *sense_hdr) +{ + switch (sense_hdr->sense_key) { + case NOT_READY: + if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x03) + /* + * LUN Not Ready - Manual Intervention Required + * indicates this is a passive path. + * + * FIXME: However, if this is seen and EVPD C0 + * indicates that this is due to a NDU in + * progress, we should set FAIL_PATH too. + * This indicates we might have to do a SCSI + * inquiry in the end_io path. Ugh. + * + * Can return FAILED only when we want the error + * recovery process to kick in. + */ + return SUCCESS; + break; + case ILLEGAL_REQUEST: + if (sense_hdr->asc == 0x25 && sense_hdr->ascq == 0x01) + /* + * An array based copy is in progress. Do not + * fail the path, do not bypass to another PG, + * do not retry. Fail the IO immediately. + * (Actually this is the same conclusion as in + * the default handler, but lets make sure.) + * + * Can return FAILED only when we want the error + * recovery process to kick in. + */ + return SUCCESS; + break; + case UNIT_ATTENTION: + if (sense_hdr->asc == 0x29 && sense_hdr->ascq == 0x00) + /* + * Unit Attention Code. This is the first IO + * to the new path, so just retry. + */ + return NEEDS_RETRY; + break; + } + + /* success just means we do not care what scsi-ml does */ + return SUCCESS; +} + +static const struct { + char *vendor; + char *model; +} clariion_dev_list[] = { + {"DGC", "RAID"}, + {"DGC", "DISK"}, + {NULL, NULL}, +}; +</ |