diff options
Diffstat (limited to 'drivers/scsi/ultrastor.c')
| -rw-r--r-- | drivers/scsi/ultrastor.c | 1204 |
1 files changed, 1204 insertions, 0 deletions
diff --git a/drivers/scsi/ultrastor.c b/drivers/scsi/ultrastor.c new file mode 100644 index 00000000000..7484916fe2a --- /dev/null +++ b/drivers/scsi/ultrastor.c @@ -0,0 +1,1204 @@ +/* + * ultrastor.c Copyright (C) 1992 David B. Gentzel + * Low-level SCSI driver for UltraStor 14F, 24F, and 34F + * by David B. Gentzel, Whitfield Software Services, Carnegie, PA + * (gentzel@nova.enet.dec.com) + * scatter/gather added by Scott Taylor (n217cg@tamuts.tamu.edu) + * 24F and multiple command support by John F. Carr (jfc@athena.mit.edu) + * John's work modified by Caleb Epstein (cae@jpmorgan.com) and + * Eric Youngdale (ericy@cais.com). + * Thanks to UltraStor for providing the necessary documentation + * + * This is an old driver, for the 14F and 34F you should be using the + * u14-34f driver instead. + */ + +/* + * TODO: + * 1. Find out why scatter/gather is limited to 16 requests per command. + * This is fixed, at least on the 24F, as of version 1.12 - CAE. + * 2. Look at command linking (mscp.command_link and + * mscp.command_link_id). (Does not work with many disks, + * and no performance increase. ERY). + * 3. Allow multiple adapters. + */ + +/* + * NOTES: + * The UltraStor 14F, 24F, and 34F are a family of intelligent, high + * performance SCSI-2 host adapters. They all support command queueing + * and scatter/gather I/O. Some of them can also emulate the standard + * WD1003 interface for use with OS's which don't support SCSI. Here + * is the scoop on the various models: + * 14F - ISA first-party DMA HA with floppy support and WD1003 emulation. + * 14N - ISA HA with floppy support. I think that this is a non-DMA + * HA. Nothing further known. + * 24F - EISA Bus Master HA with floppy support and WD1003 emulation. + * 34F - VL-Bus Bus Master HA with floppy support (no WD1003 emulation). + * + * The 14F, 24F, and 34F are supported by this driver. + * + * Places flagged with a triple question-mark are things which are either + * unfinished, questionable, or wrong. + */ + +/* Changes from version 1.11 alpha to 1.12 + * + * Increased the size of the scatter-gather list to 33 entries for + * the 24F adapter (it was 16). I don't have the specs for the 14F + * or the 34F, so they may support larger s-g lists as well. + * + * Caleb Epstein <cae@jpmorgan.com> + */ + +/* Changes from version 1.9 to 1.11 + * + * Patches to bring this driver up to speed with the default kernel + * driver which supports only the 14F and 34F adapters. This version + * should compile cleanly into 0.99.13, 0.99.12 and probably 0.99.11. + * + * Fixes from Eric Youngdale to fix a few possible race conditions and + * several problems with bit testing operations (insufficient + * parentheses). + * + * Removed the ultrastor_abort() and ultrastor_reset() functions + * (enclosed them in #if 0 / #endif). These functions, at least on + * the 24F, cause the SCSI bus to do odd things and generally lead to + * kernel panics and machine hangs. This is like the Adaptec code. + * + * Use check/snarf_region for 14f, 34f to avoid I/O space address conflicts. + */ + +/* Changes from version 1.8 to version 1.9 + * + * 0.99.11 patches (cae@jpmorgan.com) */ + +/* Changes from version 1.7 to version 1.8 + * + * Better error reporting. + */ + +/* Changes from version 1.6 to version 1.7 + * + * Removed CSIR command code. + * + * Better race condition avoidance (xchgb function added). + * + * Set ICM and OGM status to zero at probe (24F) + * + * reset sends soft reset to UltraStor adapter + * + * reset adapter if adapter interrupts with an invalid MSCP address + * + * handle aborted command interrupt (24F) + * + */ + +/* Changes from version 1.5 to version 1.6: + * + * Read MSCP address from ICM _before_ clearing the interrupt flag. + * This fixes a race condition. + */ + +/* Changes from version 1.4 to version 1.5: + * + * Abort now calls done when multiple commands are enabled. + * + * Clear busy when aborted command finishes, not when abort is called. + * + * More debugging messages for aborts. + */ + +/* Changes from version 1.3 to version 1.4: + * + * Enable automatic request of sense data on error (requires newer version + * of scsi.c to be useful). + * + * Fix PORT_OVERRIDE for 14F. + * + * Fix abort and reset to work properly (config.aborted wasn't cleared + * after it was tested, so after a command abort no further commands would + * work). + * + * Boot time test to enable SCSI bus reset (defaults to not allowing reset). + * + * Fix test for OGM busy -- the busy bit is in different places on the 24F. + * + * Release ICM slot by clearing first byte on 24F. + */ + +#include <linux/module.h> +#include <linux/blkdev.h> +#include <linux/interrupt.h> +#include <linux/stddef.h> +#include <linux/string.h> +#include <linux/kernel.h> +#include <linux/ioport.h> +#include <linux/proc_fs.h> +#include <linux/spinlock.h> +#include <linux/stat.h> +#include <linux/bitops.h> + +#include <asm/io.h> +#include <asm/system.h> +#include <asm/dma.h> + +#define ULTRASTOR_PRIVATE /* Get the private stuff from ultrastor.h */ +#include "scsi.h" +#include <scsi/scsi_host.h> +#include "ultrastor.h" + +#define FALSE 0 +#define TRUE 1 + +#ifndef ULTRASTOR_DEBUG +#define ULTRASTOR_DEBUG (UD_ABORT|UD_CSIR|UD_RESET) +#endif + +#define VERSION "1.12" + +#define PACKED __attribute__((packed)) +#define ALIGNED(x) __attribute__((aligned(x))) + + +/* The 14F uses an array of 4-byte ints for its scatter/gather list. + The data can be unaligned, but need not be. It's easier to give + the list normal alignment since it doesn't need to fit into a + packed structure. */ + +typedef struct { + u32 address; + u32 num_bytes; +} ultrastor_sg_list; + + +/* MailBox SCSI Command Packet. Basic command structure for communicating + with controller. */ +struct mscp { + unsigned char opcode: 3; /* type of command */ + unsigned char xdir: 2; /* data transfer direction */ + unsigned char dcn: 1; /* disable disconnect */ + unsigned char ca: 1; /* use cache (if available) */ + unsigned char sg: 1; /* scatter/gather operation */ + unsigned char target_id: 3; /* target SCSI id */ + unsigned char ch_no: 2; /* SCSI channel (always 0 for 14f) */ + unsigned char lun: 3; /* logical unit number */ + unsigned int transfer_data PACKED; /* transfer data pointer */ + unsigned int transfer_data_length PACKED; /* length in bytes */ + unsigned int command_link PACKED; /* for linking command chains */ + unsigned char scsi_command_link_id; /* identifies command in chain */ + unsigned char number_of_sg_list; /* (if sg is set) 8 bytes per list */ + unsigned char length_of_sense_byte; + unsigned char length_of_scsi_cdbs; /* 6, 10, or 12 */ + unsigned char scsi_cdbs[12]; /* SCSI commands */ + unsigned char adapter_status; /* non-zero indicates HA error */ + unsigned char target_status; /* non-zero indicates target error */ + u32 sense_data PACKED; + /* The following fields are for software only. They are included in + the MSCP structure because they are associated with SCSI requests. */ + void (*done)(Scsi_Cmnd *); + Scsi_Cmnd *SCint; + ultrastor_sg_list sglist[ULTRASTOR_24F_MAX_SG]; /* use larger size for 24F */ +}; + + +/* Port addresses (relative to the base address) */ +#define U14F_PRODUCT_ID(port) ((port) + 0x4) +#define CONFIG(port) ((port) + 0x6) + +/* Port addresses relative to the doorbell base address. */ +#define LCL_DOORBELL_MASK(port) ((port) + 0x0) +#define LCL_DOORBELL_INTR(port) ((port) + 0x1) +#define SYS_DOORBELL_MASK(port) ((port) + 0x2) +#define SYS_DOORBELL_INTR(port) ((port) + 0x3) + + +/* Used to store configuration info read from config i/o registers. Most of + this is not used yet, but might as well save it. + + This structure also holds port addresses that are not at the same offset + on the 14F and 24F. + + This structure holds all data that must be duplicated to support multiple + adapters. */ + +static struct ultrastor_config +{ + unsigned short port_address; /* base address of card */ + unsigned short doorbell_address; /* base address of doorbell CSRs */ + unsigned short ogm_address; /* base address of OGM */ + unsigned short icm_address; /* base address of ICM */ + const void *bios_segment; + unsigned char interrupt: 4; + unsigned char dma_channel: 3; + unsigned char bios_drive_number: 1; + unsigned char heads; + unsigned char sectors; + unsigned char ha_scsi_id: 3; + unsigned char subversion: 4; + unsigned char revision; + /* The slot number is used to distinguish the 24F (slot != 0) from + the 14F and 34F (slot == 0). */ + unsigned char slot; + +#ifdef PRINT_U24F_VERSION + volatile int csir_done; +#endif + + /* A pool of MSCP structures for this adapter, and a bitmask of + busy structures. (If ULTRASTOR_14F_MAX_CMDS == 1, a 1 byte + busy flag is used instead.) */ + +#if ULTRASTOR_MAX_CMDS == 1 + unsigned char mscp_busy; +#else + unsigned long mscp_free; +#endif + volatile unsigned char aborted[ULTRASTOR_MAX_CMDS]; + struct mscp mscp[ULTRASTOR_MAX_CMDS]; +} config = {0}; + +/* Set this to 1 to reset the SCSI bus on error. */ +static int ultrastor_bus_reset; + + +/* Allowed BIOS base addresses (NULL indicates reserved) */ +static const void *const bios_segment_table[8] = { + NULL, (void *)0xC4000, (void *)0xC8000, (void *)0xCC000, + (void *)0xD0000, (void *)0xD4000, (void *)0xD8000, (void *)0xDC000, +}; + +/* Allowed IRQs for 14f */ +static const unsigned char interrupt_table_14f[4] = { 15, 14, 11, 10 }; + +/* Allowed DMA channels for 14f (0 indicates reserved) */ +static const unsigned char dma_channel_table_14f[4] = { 5, 6, 7, 0 }; + +/* Head/sector mappings allowed by 14f */ +static const struct { + unsigned char heads; + unsigned char sectors; +} mapping_table[4] = { { 16, 63 }, { 64, 32 }, { 64, 63 }, { 64, 32 } }; + +#ifndef PORT_OVERRIDE +/* ??? A probe of address 0x310 screws up NE2000 cards */ +static const unsigned short ultrastor_ports_14f[] = { + 0x330, 0x340, /*0x310,*/ 0x230, 0x240, 0x210, 0x130, 0x140, +}; +#endif + +static void ultrastor_interrupt(int, void *, struct pt_regs *); +static irqreturn_t do_ultrastor_interrupt(int, void *, struct pt_regs *); +static inline void build_sg_list(struct mscp *, Scsi_Cmnd *SCpnt); + + +/* Always called with host lock held */ + +static inline int find_and_clear_bit_16(unsigned long *field) +{ + int rv; + + if (*field == 0) panic("No free mscp"); + asm("xorl %0,%0\n0:\tbsfw %1,%w0\n\tbtr %0,%1\n\tjnc 0b" + : "=&r" (rv), "=m" (*field) : "1" (*field)); + return rv; +} + +/* This has been re-implemented with the help of Richard Earnshaw, + <rwe@pegasus.esprit.ec.org> and works with gcc-2.5.8 and gcc-2.6.0. + The instability noted by jfc below appears to be a bug in + gcc-2.5.x when compiling w/o optimization. --Caleb + + This asm is fragile: it doesn't work without the casts and it may + not work without optimization. Maybe I should add a swap builtin + to gcc. --jfc */ +static inline unsigned char xchgb(unsigned char reg, + volatile unsigned char *mem) +{ + __asm__ ("xchgb %0,%1" : "=q" (reg), "=m" (*mem) : "0" (reg)); + return reg; +} + +#if ULTRASTOR_DEBUG & (UD_COMMAND | UD_ABORT) + +/* Always called with the host lock held */ +static void log_ultrastor_abort(struct ultrastor_config *config, + int command) +{ + static char fmt[80] = "abort %d (%x); MSCP free pool: %x;"; + int i; + + for (i = 0; i < ULTRASTOR_MAX_CMDS; i++) + { + fmt[20 + i*2] = ' '; + if (! (config->mscp_free & (1 << i))) + fmt[21 + i*2] = '0' + config->mscp[i].target_id; + else + fmt[21 + i*2] = '-'; + } + fmt[20 + ULTRASTOR_MAX_CMDS * 2] = '\n'; + fmt[21 + ULTRASTOR_MAX_CMDS * 2] = 0; + printk(fmt, command, &config->mscp[command], config->mscp_free); + +} +#endif + +static int ultrastor_14f_detect(Scsi_Host_Template * tpnt) +{ + size_t i; + unsigned char in_byte, version_byte = 0; + struct config_1 { + unsigned char bios_segment: 3; + unsigned char removable_disks_as_fixed: 1; + unsigned char interrupt: 2; + unsigned char dma_channel: 2; + } config_1; + struct config_2 { + unsigned char ha_scsi_id: 3; + unsigned char mapping_mode: 2; + unsigned char bios_drive_number: 1; + unsigned char tfr_port: 2; + } config_2; + +#if (ULTRASTOR_DEBUG & UD_DETECT) + printk("US14F: detect: called\n"); +#endif + + /* If a 24F has already been configured, don't look for a 14F. */ + if (config.bios_segment) + return FALSE; + +#ifdef PORT_OVERRIDE + if(!request_region(PORT_OVERRIDE, 0xc, "ultrastor")) { + printk("Ultrastor I/O space already in use\n"); + return FALSE; + }; + config.port_address = PORT_OVERRIDE; +#else + for (i = 0; i < ARRAY_SIZE(ultrastor_ports_14f); i++) { + if(!request_region(ultrastor_ports_14f[i], 0x0c, "ultrastor")) continue; + config.port_address = ultrastor_ports_14f[i]; +#endif + +#if (ULTRASTOR_DEBUG & UD_DETECT) + printk("US14F: detect: testing port address %03X\n", config.port_address); +#endif + + in_byte = inb(U14F_PRODUCT_ID(config.port_address)); + if (in_byte != US14F_PRODUCT_ID_0) { +#if (ULTRASTOR_DEBUG & UD_DETECT) +# ifdef PORT_OVERRIDE + printk("US14F: detect: wrong product ID 0 - %02X\n", in_byte); +# else + printk("US14F: detect: no adapter at port %03X\n", config.port_address); +# endif +#endif +#ifdef PORT_OVERRIDE + goto out_release_port; +#else + release_region(config.port_address, 0x0c); + continue; +#endif + } + in_byte = inb(U14F_PRODUCT_ID(config.port_address) + 1); + /* Only upper nibble is significant for Product ID 1 */ + if ((in_byte & 0xF0) != US14F_PRODUCT_ID_1) { +#if (ULTRASTOR_DEBUG & UD_DETECT) +# ifdef PORT_OVERRIDE + printk("US14F: detect: wrong product ID 1 - %02X\n", in_byte); +# else + printk("US14F: detect: no adapter at port %03X\n", config.port_address); +# endif +#endif +#ifdef PORT_OVERRIDE + goto out_release_port; +#else + release_region(config.port_address, 0x0c); + continue; +#endif + } + version_byte = in_byte; +#ifndef PORT_OVERRIDE + break; + } + if (i == ARRAY_SIZE(ultrastor_ports_14f)) { +# if (ULTRASTOR_DEBUG & UD_DETECT) + printk("US14F: detect: no port address found!\n"); +# endif + /* all ports probed already released - we can just go straight out */ + return FALSE; + } +#endif + +#if (ULTRASTOR_DEBUG & UD_DETECT) + printk("US14F: detect: adapter found at port address %03X\n", + config.port_address); +#endif + + /* Set local doorbell mask to disallow bus reset unless + ultrastor_bus_reset is true. */ + outb(ultrastor_bus_reset ? 0xc2 : 0x82, LCL_DOORBELL_MASK(config.port_address)); + + /* All above tests passed, must be the right thing. Get some useful + info. */ + + /* Register the I/O space that we use */ + + *(char *)&config_1 = inb(CONFIG(config.port_address + 0)); + *(char *)&config_2 = inb(CONFIG(config.port_address + 1)); + config.bios_segment = bios_segment_table[config_1.bios_segment]; + config.doorbell_address = config.port_address; + config.ogm_address = config.port_address + 0x8; + config.icm_address = config.port_address + 0xC; + config.interrupt = interrupt_table_14f[config_1.interrupt]; + config.ha_scsi_id = config_2.ha_scsi_id; + config.heads = mapping_table[config_2.mapping_mode].heads; + config.sectors = mapping_table[config_2.mapping_mode].sectors; + config.bios_drive_number = config_2.bios_drive_number; + config.subversion = (version_byte & 0x0F); + if (config.subversion == U34F) + config.dma_channel = 0; + else + config.dma_channel = dma_channel_table_14f[config_1.dma_channel]; + + if (!config.bios_segment) { +#if (ULTRASTOR_DEBUG & UD_DETECT) + printk("US14F: detect: not detected.\n"); +#endif + goto out_release_port; + } + + /* Final consistency check, verify previous info. */ + if (config.subversion != U34F) + if (!config.dma_channel || !(config_2.tfr_port & 0x2)) { +#if (ULTRASTOR_DEBUG & UD_DETECT) + printk("US14F: detect: consistency check failed\n"); +#endif + goto out_release_port; + } + + /* If we were TRULY paranoid, we could issue a host adapter inquiry + command here and verify the data returned. But frankly, I'm + exhausted! */ + + /* Finally! Now I'm satisfied... */ +#if (ULTRASTOR_DEBUG & UD_DETECT) + printk("US14F: detect: detect succeeded\n" + " Port address: %03X\n" + " BIOS segment: %05X\n" + " Interrupt: %u\n" + " DMA channel: %u\n" + " H/A SCSI ID: %u\n" + " Subversion: %u\n", + config.port_address, config.bios_segment, config.interrupt, + config.dma_channel, config.ha_scsi_id, config.subversion); +#endif + tpnt->this_id = config.ha_scsi_id; + tpnt->unchecked_isa_dma = (config.subversion != U34F); + +#if ULTRASTOR_MAX_CMDS > 1 + config.mscp_free = ~0; +#endif + + /* + * Brrr, &config.mscp[0].SCint->host) it is something magical.... + * XXX and FIXME + */ + if (request_irq(config.interrupt, do_ultrastor_interrupt, 0, "Ultrastor", &config.mscp[0].SCint->device->host)) { + printk("Unable to allocate IRQ%u for UltraStor controller.\n", + config.interrupt); + goto out_release_port; + } + if (config.dma_channel && request_dma(config.dma_channel,"Ultrastor")) { + printk("Unable to allocate DMA channel %u for UltraStor controller.\n", + config.dma_channel); + free_irq(config.interrupt, NULL); + goto out_release_port; + } + tpnt->sg_tablesize = ULTRASTOR_14F_MAX_SG; + printk("UltraStor driver version" VERSION ". Using %d SG lists.\n", + ULTRASTOR_14F_MAX_SG); + + return TRUE; +out_release_port: + release_region(config.port_address, 0x0c); + return FALSE; +} + +static int ultrastor_24f_detect(Scsi_Host_Template * tpnt) +{ + int i; + struct Scsi_Host * shpnt = NULL; + +#if (ULTRASTOR_DEBUG & UD_DETECT) + printk("US24F: detect"); +#endif + + /* probe each EISA slot at slot address C80 */ + for (i = 1; i < 15; i++) + { + unsigned char config_1, config_2; + unsigned short addr = (i << 12) | ULTRASTOR_24F_PORT; + + if (inb(addr) != US24F_PRODUCT_ID_0 && + inb(addr+1) != US24F_PRODUCT_ID_1 && + inb(addr+2) != US24F_PRODUCT_ID_2) + continue; + + config.revision = inb(addr+3); + config.slot = i; + if (! (inb(addr+4) & 1)) + { +#if (ULTRASTOR_DEBUG & UD_DETECT) + printk("U24F: found disabled card in slot %u\n", i); +#endif + continue; + } +#if (ULTRASTOR_DEBUG & UD_DETECT) + printk("U24F: found card in slot %u\n", i); +#endif + config_1 = inb(addr + 5); + config.bios_segment = bios_segment_table[config_1 & 7]; + switch(config_1 >> 4) + { + case 1: + config.interrupt = 15; + break; + case 2: + config.interrupt = 14; + break; + case 4: + config.interrupt = 11; + break; + case 8: + config.interrupt = 10; + break; + default: + printk("U24F: invalid IRQ\n"); + return FALSE; + } + + /* BIOS addr set */ + /* base port set */ + config.port_address = addr; + config.doorbell_address = addr + 12; + config.ogm_address = addr + 0x17; + config.icm_address = addr + 0x1C; + config_2 = inb(addr + 7); + config.ha_scsi_id = config_2 & 7; + config.heads = mapping_table[(config_2 >> 3) & 3].heads; + config.sectors = mapping_table[(config_2 >> 3) & 3].sectors; +#if (ULTRASTOR_DEBUG & UD_DETECT) + printk("US24F: detect: detect succeeded\n" + " Port address: %03X\n" + " BIOS segment: %05X\n" + " Interrupt: %u\n" + " H/A SCSI ID: %u\n", + config.port_address, config.bios_segment, + config.interrupt, config.ha_scsi_id); +#endif + tpnt->this_id = config.ha_scsi_id; + tpnt->unchecked_isa_dma = 0; + tpnt->sg_tablesize = ULTRASTOR_24F_MAX_SG; + + shpnt = scsi_register(tpnt, 0); + if (!shpnt) { + printk(KERN_WARNING "(ultrastor:) Could not register scsi device. Aborting registration.\n"); + free_irq(config.interrupt, do_ultrastor_interrupt); + return FALSE; + } + + if (request_irq(config.interrupt, do_ultrastor_interrupt, 0, "Ultrastor", shpnt)) + { + printk("Unable to allocate IRQ%u for UltraStor controller.\n", + config.interrupt); + return FALSE; + } + + shpnt->irq = config.interrupt; + shpnt->dma_channel = config.dma_channel; + shpnt->io_port = config.port_address; + +#if ULTRASTOR_MAX_CMDS > 1 + config.mscp_free = ~0; +#endif + /* Mark ICM and OGM free */ + outb(0, addr + 0x16); + outb(0, addr + 0x1B); + + /* Set local doorbell mask to disallow bus reset unless + ultrastor_bus_reset is true. */ + outb(ultrastor_bus_reset ? 0xc2 : 0x82, LCL_DOORBELL_MASK(addr+12)); + outb(0x02, SYS_DOORBELL_MASK(addr+12)); + printk("UltraStor driver version " VERSION ". Using %d SG lists.\n", + tpnt->sg_tablesize); + return TRUE; + } + return FALSE; +} + +static int ultrastor_detect(Scsi_Host_Template * tpnt) +{ + tpnt->proc_name = "ultrastor"; + return ultrastor_14f_detect(tpnt) || ultrastor_24f_detect(tpnt); +} + +static int ultrastor_release(struct Scsi_Host *shost) +{ + if (shost->irq) + free_irq(shost->irq, NULL); + if (shost->dma_channel != 0xff) + free_dma(shost->dma_channel); + if (shost->io_port && shost->n_io_port) + release_region(shost->io_port, shost->n_io_port); + scsi_unregister(shost); + return 0; +} + +static const char *ultrastor_info(struct Scsi_Host * shpnt) +{ + static char buf[64]; + + if (config.slot) + sprintf(buf, "UltraStor 24F SCSI @ Slot %u IRQ%u", + config.slot, config.interrupt); + else if (config.subversion) + sprintf(buf, "UltraStor 34F SCSI @ Port %03X BIOS %05X IRQ%u", + config.port_address, (int)config.bios_segment, + config.interrupt); + else + sprintf(buf, "UltraStor 14F SCSI @ Port %03X BIOS %05X IRQ%u DMA%u", + config.port_address, (int)config.bios_segment, + config.interrupt, config.dma_channel); + return buf; +} + +static inline void build_sg_list(struct mscp *mscp, Scsi_Cmnd *SCpnt) +{ + struct scatterlist *sl; + long transfer_length = 0; + int i, max; + + sl = (struct scatterlist *) SCpnt->request_buffer; + max = SCpnt->use_sg; + for (i = 0; i < max; i++) { + mscp->sglist[i].address = isa_page_to_bus(sl[i].page) + sl[i].offset; + mscp->sglist[i].num_bytes = sl[i].length; + transfer_length += sl[i].length; + } + mscp->number_of_sg_list = max; + mscp->transfer_data = isa_virt_to_bus(mscp->sglist); + /* ??? May not be necessary. Docs are unclear as to whether transfer + length field is ignored or whether it should be set to the total + number of bytes of the transfer. */ + mscp->transfer_data_length = transfer_length; +} + +static int ultrastor_queuecommand(Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *)) +{ + struct mscp *my_mscp; +#if ULTRASTOR_MAX_CMDS > 1 + int mscp_index; +#endif + unsigned int status; + + /* Next test is for debugging; "can't happen" */ + if ((config.mscp_free & ((1U << ULTRASTOR_MAX_CMDS) - 1)) == 0) + panic("ultrastor_queuecommand: no free MSCP\n"); + mscp_index = find_and_clear_bit_16(&config.mscp_free); + + /* Has the command been aborted? */ + if (xchgb(0xff, &config.aborted[mscp_index]) != 0) + { + status = DID_ABORT << 16; + goto aborted; + } + + my_mscp = &config.mscp[mscp_index]; + + *(unsigned char *)my_mscp = OP_SCSI | (DTD_SCSI << 3); + + /* Tape drives don't work properly if the cache is used. The SCSI + READ command for a tape doesn't have a block offset, and the adapter + incorrectly assumes that all reads from the tape read the same + blocks. Results will depend on read buffer size and other disk + activity. + + ??? Which other device types should never use the cache? */ + my_mscp->ca = SCpnt->device->type != TYPE_TAPE; + my_mscp->target_id = SCpnt->device->id; + my_mscp->ch_no = 0; + my_mscp->lun = SCpnt->device->lun; + if (SCpnt->use_sg) { + /* Set scatter/gather flag in SCSI command packet */ + my_mscp->sg = TRUE; + build_sg_list(my_mscp, SCpnt); + } else { + /* Unset scatter/gather flag in SCSI command packet */ + my_mscp->sg = FALSE; + my_mscp->transfer_data = isa_virt_to_bus(SCpnt->request_buffer); + my_mscp->transfer_data_length = SCpnt->request_bufflen; + } + my_mscp->command_link = 0; /*???*/ + my_mscp->scsi_command_link_id = 0; /*???*/ + my_mscp->length_of_sense_byte = sizeof SCpnt->sense_buffer; + my_mscp->length_of_scsi_cdbs = SCpnt->cmd_len; + memcpy(my_mscp->scsi_cdbs, SCpnt->cmnd, my_mscp->length_of_scsi_cdbs); + my_mscp->adapter_status = 0; + my_mscp->target_status = 0; + my_mscp->sense_data = isa_virt_to_bus(&SCpnt->sense_buffer); + my_mscp->done = done; + my_mscp->SCint = SCpnt; + SCpnt->host_scribble = (unsigned char *)my_mscp; + + /* Find free OGM slot. On 24F, look for OGM status byte == 0. + On 14F and 34F, wait for local interrupt pending flag to clear. + + FIXME: now we are using new_eh we should punt here and let the + midlayer sort it out */ + +retry: + if (config.slot) + while (inb(config.ogm_address - 1) != 0 && config.aborted[mscp_index] == 0xff) + barrier(); + + /* else??? */ + + while ((inb(LCL_DOORBELL_INTR(config.doorbell_address)) & (config.slot ? 2 : 1)) && config.aborted[mscp_index] == 0xff) + barrier(); + + /* To avoid race conditions, keep the code to write to the adapter + atomic. This simplifies the abort code. Right now the + scsi mid layer has the host_lock already held + */ + + if (inb(LCL_DOORBELL_INTR(config.doorbell_address)) & (config.slot ? 2 : 1)) + goto retry; + + status = xchgb(0, &config.aborted[mscp_index]); + if (status != 0xff) { + +#if ULTRASTOR_DEBUG & (UD_COMMAND | UD_ABORT) + printk("USx4F: queuecommand: aborted\n"); +#if ULTRASTOR_MAX_CMDS > 1 + log_ultrastor_abort(&config, mscp_index); +#endif +#endif + status <<= 16; + + aborted: + set_bit(mscp_index, &config.mscp_free); + /* If the driver queues commands, call the done proc here. Otherwise + return an error. */ +#if ULTRASTOR_MAX_CMDS > 1 + SCpnt->result = status; + done(SCpnt); + return 0; +#else + return status; +#endif + } + + /* Store pointer in OGM address bytes */ + outl(isa_virt_to_bus(my_mscp), config.ogm_address); + + /* Issue OGM interrupt */ + if (config.slot) { + /* Write OGM command register on 24F */ + outb(1, config.ogm_address - 1); + outb(0x2, LCL_DOORBELL_INTR(config.doorbell_address)); + } else { + outb(0x1, LCL_DOORBELL_INTR(config.doorbell_address)); + } + +#if (ULTRASTOR_DEBUG & UD_COMMAND) + printk("USx4F: queuecommand: returning\n"); +#endif + + return 0; +} + +/* This code must deal with 2 cases: + + 1. The command has not been written to the OGM. In this case, set + the abort flag and return. + + 2. The command has been written to the OGM and is stuck somewhere in + the adapter. + + 2a. On a 24F, ask the adapter to abort the command. It will interrupt + when it does. + + 2b. Call the command's done procedure. + + */ + +static int ultrastor_abort(Scsi_Cmnd *SCpnt) +{ +#if ULTRASTOR_DEBUG & UD_ABORT + char out[108]; + unsigned char icm_status = 0, ogm_status = 0; + unsigned int icm_addr = 0, ogm_addr = 0; +#endif + unsigned int mscp_index; + unsigned char old_aborted; + unsigned long flags; + void (*done)(Scsi_Cmnd *); + struct Scsi_Host *host = SCpnt->device->host; + + if(config.slot) + return FAILED; /* Do not attempt an abort for the 24f */ + + /* Simple consistency checking */ + if(!SCpnt->host_scribble) + return FAILED; + + mscp_index = ((struct mscp *)SCpnt->host_scribble) - config.mscp; + if (mscp_index >= ULTRASTOR_MAX_CMDS) + panic("Ux4F aborting invalid MSCP"); + +#if ULTRASTOR_DEBUG & UD_ABORT + if (config.slot) + { + int port0 = (config.slot << 12) | 0xc80; + int i; + unsigned long flags; + + spin_lock_irqsave(host->host_lock, flags); + strcpy(out, "OGM %d:%x ICM %d:%x ports: "); + for (i = 0; i < 16; i++) + { + unsigned char p = inb(port0 + i); + out[28 + i * 3] = "0123456789abcdef"[p >> 4]; + out[29 + i * 3] = "0123456789abcdef"[p & 15]; + out[30 + i * 3] = ' '; + } + out[28 + i * 3] = '\n'; + out[29 + i * 3] = 0; + ogm_status = inb(port0 + 22); + ogm_addr = (unsigned int)isa_bus_to_virt(inl(port0 + 23)); + icm_status = inb(port0 + 27); + icm_addr = (unsigned int)isa_bus_to_virt(inl(port0 + 28)); + spin_lock_irqsave(host->host_lock, flags); + } + + /* First check to see if an interrupt is pending. I suspect the SiS + chipset loses interrupts. (I also suspect is mangles data, but + one bug at a time... */ + if (config.slot ? inb(config.icm_address - 1) == 2 : + (inb(SYS_DOORBELL_INTR(config.doorbell_address)) & 1)) + { + printk("Ux4F: abort while completed command pending\n"); + + spin_lock_irqsave(host->host_lock, flags); + /* FIXME: Ewww... need to think about passing host around properly */ + ultrastor_interrupt(0, NULL, NULL); + spin_unlock_irqrestore(host->host_lock, flags); + return SUCCESS; + } +#endif + + old_aborted = xchgb(DID_ABORT, &config.aborted[mscp_index]); + + /* aborted == 0xff is the signal that queuecommand has not yet sent + the command. It will notice the new abort flag and fail. */ + if (old_aborted == 0xff) + return SUCCESS; + + /* On 24F, send an abort MSCP request. The adapter will interrupt + and the interrupt handler will call done. */ + if (config.slot && inb(config.ogm_address - 1) == 0) + { + unsigned long flags; + + spin_lock_irqsave(host->host_lock, flags); + outl(isa_virt_to_bus(&config.mscp[mscp_index]), config.ogm_address); + udelay(8); + outb(0x80, config.ogm_address - 1); + outb(0x2, LCL_DOORBELL_INTR(config.doorbell_address)); +#if ULTRASTOR_DEBUG & UD_ABORT + log_ultrastor_abort(&config, mscp_index); + printk(out, ogm_status, ogm_addr, icm_status, icm_addr); +#endif + spin_unlock_irqrestore(host->host_lock, flags); + /* FIXME: add a wait for the abort to complete */ + return SUCCESS; + } + +#if ULTRASTOR_DEBUG & UD_ABORT + log_ultrastor_abort(&config, mscp_index); +#endif + + /* Can't request a graceful abort. Either this is not a 24F or + the OGM is busy. Don't free the command -- the adapter might + still be using it. Setting SCint = 0 causes the interrupt + handler to ignore the command. */ + + /* FIXME - devices that implement soft resets will still be running + the command after a bus reset. We would probably rather leave + the command in the queue. The upper level code will automatically + leave the command in the active state instead of requeueing it. ERY */ + +#if ULTRASTOR_DEBUG & UD_ABORT + if (config.mscp[mscp_index].SCint != SCpnt) + printk("abort: command mismatch, %p != %p\n", + config.mscp[mscp_index].SCint, SCpnt); +#endif + if (config.mscp[mscp_index].SCint == 0) + return SCSI_ABORT_NOT_RUNNING; + + if (config.mscp[mscp_index].SCint != SCpnt) panic("Bad abort"); + config.mscp[mscp_index].SCint = NULL; + done = config.mscp[mscp_index].done; + config.mscp[mscp_index].done = NULL; + SCpnt->result = DID_ABORT << 16; + + /* Take the host lock to guard against scsi layer re-entry */ + spin_lock_irqsave(host->host_lock, flags); + done(SCpnt); + spin_unlock_irqrestore(host->host_lock, flags); + + /* Need to set a timeout here in case command never completes. */ + return SUCCESS; +} + +static int ultrastor_host_reset(Scsi_Cmnd * SCpnt) +{ + unsigned long flags; + int i; + struct Scsi_Host *host = SCpnt->device->host; + +#if (ULTRASTOR_DEBUG & UD_RESET) + printk("US14F: reset: called\n"); +#endif + + if(config.slot) + return FAILED; + + spin_lock_irqsave(host->host_lock, flags); + /* Reset the adapter and SCSI bus. The SCSI bus reset can be + inhibited by clearing ultrastor_bus_reset before probe. */ + outb(0xc0, LCL_DOORBELL_INTR(config.doorbell_address)); + if (config.slot) + { + outb(0, config.ogm_address - 1); + outb(0, config.icm_address - 1); + } + +#if ULTRASTOR_MAX_CMDS == 1 + if (config.mscp_busy && config.mscp->done && config.mscp->SCint) + { + config.mscp->SCint->result = DID_RESET << 16; + config.mscp->done(config.mscp->SCint); + } + config.mscp->SCint = 0; +#else + for (i = 0; i < ULTRASTOR_MAX_CMDS; i++) + { + if (! (config.mscp_free & (1 << i)) && + config.mscp[i].done && config.mscp[i].SCint) + { + config.mscp[i].SCint->result = DID_RESET << 16; + config.mscp[i].done(config.mscp[i].SCint); + config.mscp[i].done = NULL; + } + config.mscp[i].SCint = NULL; + } +#endif + + /* FIXME - if the device implements soft resets, then the command + will still be running. ERY + + Even bigger deal with new_eh! + */ + + memset((unsigned char *)config.aborted, 0, sizeof config.aborted); +#if ULTRASTOR_MAX_CMDS == 1 + config.mscp_busy = 0; +#else + config.mscp_free = ~0; +#endif + + spin_unlock_irqrestore(host->host_lock, flags); + return SCSI_RESET_SUCCESS; + +} + +int ultrastor_biosparam(struct scsi_device *sdev, struct block_device *bdev, + sector_t capacity, int * dkinfo) +{ + int size = capacity; + unsigned int s = config.heads * config.sectors; + + dkinfo[0] = config.heads; + dkinfo[1] = config.sectors; + dkinfo[2] = size / s; /* Ignore partial cylinders */ +#if 0 + if (dkinfo[2] > 1024) + dkinfo[2] = 1024; +#endif + return 0; +} + +static void ultrastor_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + unsigned int status; +#if ULTRASTOR_MAX_CMDS > 1 + unsigned int mscp_index; +#endif + struct mscp *mscp; + void (*done)(Scsi_Cmnd *); + Scsi_Cmnd *SCtmp; + +#if ULTRASTOR_MAX_CMDS == 1 + mscp = &config.mscp[0]; +#else + mscp = (struct mscp *)isa_bus_to_virt(inl(config.icm_address)); + mscp_index = mscp - config.mscp; + if (mscp_index >= ULTRASTOR_MAX_CMDS) { + printk("Ux4F interrupt: bad MSCP address %x\n", (unsigned int) mscp); + /* A command has been lost. Reset and report an error + for all commands. */ + ultrastor_host_reset(dev_id); + return; + } +#endif + + /* Clean ICM slot (set ICMINT bit to 0) */ + if (config.slot) { + unsigned char icm_status = inb(config.icm_address - 1); +#if ULTRASTOR_DEBUG & (UD_INTERRUPT|UD_ERROR|UD_ABORT) + if (icm_status != 1 && icm_status != 2) + printk("US24F: ICM status %x for MSCP %d (%x)\n", icm_status, + mscp_index, (unsigned int) mscp); +#endif + /* The manual says clear interrupt then write 0 to ICM status. + This seems backwards, but I'll do it anyway. --jfc */ + outb(2, SYS_DOORBELL_INTR(config.doorbell_address)); + outb(0, config.icm_address - 1); + if (icm_status == 4) { + printk("UltraStor abort command failed\n"); + return; + } + if (icm_status == 3) { + void (*done)(Scsi_Cmnd *) = mscp->done; + if (done) { + mscp->done = NULL; + mscp->SCint->result = DID_ABORT << 16; + done(mscp->SCint); + } + return; + } + } else { + outb(1, SYS_DOORBELL_INTR(config.doorbell_address)); + } + + SCtmp = mscp->SCint; + mscp->SCint = NULL; + + if (SCtmp == 0) + { +#if ULTRASTOR_DEBUG & (UD_ABORT|UD_INTERRUPT) + printk("MSCP %d (%x): no command\n", mscp_index, (unsigned int) mscp); +#endif +#if ULTRASTOR_MAX_CMDS == 1 + config.mscp_busy = FALSE; +#else + set_bit(mscp_index, &config.mscp_free); +#endif + config.aborted[mscp_index] = 0; + return; + } + + /* Save done locally and zero before calling. This is needed as + once we call done, we may get another command queued before this + interrupt service routine can return. */ + done = mscp->done; + mscp->done = NULL; + + /* Let the higher levels know that we're done */ + switch (mscp->adapter_status) + { + case 0: + status = DID_OK << 16; + break; + case 0x01: /* invalid command */ + case 0x02: /* invalid parameters */ + case 0x03: /* invalid data list */ + default: + status = DID_ERROR << 16; + break; + case 0x84: /* SCSI bus abort */ + status = DID_ABORT << 16; + break; + case 0x91: + status = DID_TIME_OUT << 16; + break; + } + + SCtmp->result = status | mscp->target_status; + + SCtmp->host_scribble = NULL; + + /* Free up mscp block for next command */ +#if ULTRASTOR_MAX_CMDS == 1 + config.mscp_busy = FALSE; +#else + set_bit(mscp_index, &config.mscp_free); +#endif + +#if ULTRASTOR_DEBUG & (UD_ABORT|UD_INTERRUPT) + if (config.aborted[mscp_index]) + printk("Ux4 interrupt: MSCP %d (%x) aborted = %d\n", + mscp_index, (unsigned int) mscp, config.aborted[mscp_index]); +#endif + config.aborted[mscp_index] = 0; + + if (done) + done(SCtmp); + else + printk("US14F: interrupt: unexpected interrupt\n"); + + if (config.slot ? inb(config.icm_address - 1) : + (inb(SYS_DOORBELL_INTR(config.doorbell_address)) & 1)) +#if (ULTRASTOR_DEBUG & UD_MULTI_CMD) + printk("Ux4F: multiple commands completed\n"); +#else + ; +#endif + +#if (ULTRASTOR_DEBUG & UD_INTERRUPT) + printk("USx4F: interrupt: returning\n"); +#endif +} + +static irqreturn_t do_ultrastor_interrupt(int irq, void *dev_id, + struct pt_regs *regs) +{ + unsigned long flags; + struct Scsi_Host *dev = dev_id; + + spin_lock_irqsave(dev->host_lock, flags); + ultrastor_interrupt(irq, dev_id, regs); + spin_unlock_irqrestore(dev->host_lock, flags); + return IRQ_HANDLED; +} + +MODULE_LICENSE("GPL"); + +static Scsi_Host_Template driver_template = { + .name = "UltraStor 14F/24F/34F", + .detect = ultrastor_detect, + .release = ultrastor_release, + .info = ultrastor_info, + .queuecommand = ultrastor_queuecommand, + .eh_abort_handler = ultrastor_abort, + .eh_host_reset_handler = ultrastor_host_reset, + .bios_param = ultrastor_biosparam, + .can_queue = ULTRASTOR_MAX_CMDS, + .sg_tablesize = ULTRASTOR_14F_MAX_SG, + .cmd_per_lun = ULTRASTOR_MAX_CMDS_PER_LUN, + .unchecked_isa_dma = 1, + .use_clustering = ENABLE_CLUSTERING, +}; +#include "scsi_module.c" |