1 files changed, 395 insertions, 251 deletions

diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c
index cb9082fd7e2..b5f8fa95567 100644
--- a/drivers/scsi/sata_sil24.c
+++ b/drivers/scsi/sata_sil24.c
@@ -31,15 +31,15 @@
 #include <asm/io.h>
 
 #define DRV_NAME	"sata_sil24"
-#define DRV_VERSION	"0.23"
+#define DRV_VERSION	"0.3"
 
 /*
  * Port request block (PRB) 32 bytes
  */
 struct sil24_prb {
-	u16	ctrl;
-	u16	prot;
-	u32	rx_cnt;
+	__le16	ctrl;
+	__le16	prot;
+	__le32	rx_cnt;
 	u8	fis[6 * 4];
 };
 
@@ -47,17 +47,17 @@ struct sil24_prb {
  * Scatter gather entry (SGE) 16 bytes
  */
 struct sil24_sge {
-	u64	addr;
-	u32	cnt;
-	u32	flags;
+	__le64	addr;
+	__le32	cnt;
+	__le32	flags;
 };
 
 /*
  * Port multiplier
  */
 struct sil24_port_multiplier {
-	u32	diag;
-	u32	sactive;
+	__le32	diag;
+	__le32	sactive;
 };
 
 enum {
@@ -86,12 +86,21 @@ enum {
 	/* HOST_SLOT_STAT bits */
 	HOST_SSTAT_ATTN		= (1 << 31),
 
+	/* HOST_CTRL bits */
+	HOST_CTRL_M66EN		= (1 << 16), /* M66EN PCI bus signal */
+	HOST_CTRL_TRDY		= (1 << 17), /* latched PCI TRDY */
+	HOST_CTRL_STOP		= (1 << 18), /* latched PCI STOP */
+	HOST_CTRL_DEVSEL	= (1 << 19), /* latched PCI DEVSEL */
+	HOST_CTRL_REQ64		= (1 << 20), /* latched PCI REQ64 */
+
 	/*
 	 * Port registers
 	 * (8192 bytes @ +0x0000, +0x2000, +0x4000 and +0x6000 @ BAR2)
 	 */
 	PORT_REGS_SIZE		= 0x2000,
-	PORT_PRB		= 0x0000, /* (32 bytes PRB + 16 bytes SGEs * 6) * 31 (3968 bytes) */
+
+	PORT_LRAM		= 0x0000, /* 31 LRAM slots and PM regs */
+	PORT_LRAM_SLOT_SZ	= 0x0080, /* 32 bytes PRB + 2 SGE, ACT... */
 
 	PORT_PM			= 0x0f80, /* 8 bytes PM * 16 (128 bytes) */
 		/* 32 bit regs */
@@ -142,8 +151,16 @@ enum {
 	PORT_IRQ_PWR_CHG	= (1 << 3), /* power management change */
 	PORT_IRQ_PHYRDY_CHG	= (1 << 4), /* PHY ready change */
 	PORT_IRQ_COMWAKE	= (1 << 5), /* COMWAKE received */
-	PORT_IRQ_UNK_FIS	= (1 << 6), /* Unknown FIS received */
-	PORT_IRQ_SDB_FIS	= (1 << 11), /* SDB FIS received */
+	PORT_IRQ_UNK_FIS	= (1 << 6), /* unknown FIS received */
+	PORT_IRQ_DEV_XCHG	= (1 << 7), /* device exchanged */
+	PORT_IRQ_8B10B		= (1 << 8), /* 8b/10b decode error threshold */
+	PORT_IRQ_CRC		= (1 << 9), /* CRC error threshold */
+	PORT_IRQ_HANDSHAKE	= (1 << 10), /* handshake error threshold */
+	PORT_IRQ_SDB_NOTIFY	= (1 << 11), /* SDB notify received */
+
+	DEF_PORT_IRQ		= PORT_IRQ_COMPLETE | PORT_IRQ_ERROR |
+				  PORT_IRQ_PHYRDY_CHG | PORT_IRQ_DEV_XCHG |
+				  PORT_IRQ_UNK_FIS,
 
 	/* bits[27:16] are unmasked (raw) */
 	PORT_IRQ_RAW_SHIFT	= 16,
@@ -174,7 +191,7 @@ enum {
 	PORT_CERR_CMD_PCIPERR	= 27, /* ctrl[15:13] 110 - PCI parity err while fetching PRB */
 	PORT_CERR_XFR_UNDEF	= 32, /* PSD ecode 00 - undefined */
 	PORT_CERR_XFR_TGTABRT	= 33, /* PSD ecode 01 - target abort */
-	PORT_CERR_XFR_MSGABRT	= 34, /* PSD ecode 10 - master abort */
+	PORT_CERR_XFR_MSTABRT	= 34, /* PSD ecode 10 - master abort */
 	PORT_CERR_XFR_PCIPERR	= 35, /* PSD ecode 11 - PCI prity err during transfer */
 	PORT_CERR_SENDSERVICE	= 36, /* FIS received while sending service */
 
@@ -202,11 +219,19 @@ enum {
 	SGE_DRD			= (1 << 29), /* discard data read (/dev/null)
 						data address ignored */
 
+	SIL24_MAX_CMDS		= 31,
+
 	/* board id */
 	BID_SIL3124		= 0,
 	BID_SIL3132		= 1,
 	BID_SIL3131		= 2,
 
+	/* host flags */
+	SIL24_COMMON_FLAGS	= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+				  ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
+				  ATA_FLAG_NCQ | ATA_FLAG_SKIP_D2H_BSY,
+	SIL24_FLAG_PCIX_IRQ_WOC	= (1 << 24), /* IRQ loss errata on PCI-X */
+
 	IRQ_STAT_4PORTS		= 0xf,
 };
 
@@ -226,6 +251,58 @@ union sil24_cmd_block {
 	struct sil24_atapi_block atapi;
 };
 
+static struct sil24_cerr_info {
+	unsigned int err_mask, action;
+	const char *desc;
+} sil24_cerr_db[] = {
+	[0]			= { AC_ERR_DEV, ATA_EH_REVALIDATE,
+				    "device error" },
+	[PORT_CERR_DEV]		= { AC_ERR_DEV, ATA_EH_REVALIDATE,
+				    "device error via D2H FIS" },
+	[PORT_CERR_SDB]		= { AC_ERR_DEV, ATA_EH_REVALIDATE,
+				    "device error via SDB FIS" },
+	[PORT_CERR_DATA]	= { AC_ERR_ATA_BUS, ATA_EH_SOFTRESET,
+				    "error in data FIS" },
+	[PORT_CERR_SEND]	= { AC_ERR_ATA_BUS, ATA_EH_SOFTRESET,
+				    "failed to transmit command FIS" },
+	[PORT_CERR_INCONSISTENT] = { AC_ERR_HSM, ATA_EH_SOFTRESET,
+				     "protocol mismatch" },
+	[PORT_CERR_DIRECTION]	= { AC_ERR_HSM, ATA_EH_SOFTRESET,
+				    "data directon mismatch" },
+	[PORT_CERR_UNDERRUN]	= { AC_ERR_HSM, ATA_EH_SOFTRESET,
+				    "ran out of SGEs while writing" },
+	[PORT_CERR_OVERRUN]	= { AC_ERR_HSM, ATA_EH_SOFTRESET,
+				    "ran out of SGEs while reading" },
+	[PORT_CERR_PKT_PROT]	= { AC_ERR_HSM, ATA_EH_SOFTRESET,
+				    "invalid data directon for ATAPI CDB" },
+	[PORT_CERR_SGT_BOUNDARY] = { AC_ERR_SYSTEM, ATA_EH_SOFTRESET,
+				     "SGT no on qword boundary" },
+	[PORT_CERR_SGT_TGTABRT]	= { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
+				    "PCI target abort while fetching SGT" },
+	[PORT_CERR_SGT_MSTABRT]	= { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
+				    "PCI master abort while fetching SGT" },
+	[PORT_CERR_SGT_PCIPERR]	= { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
+				    "PCI parity error while fetching SGT" },
+	[PORT_CERR_CMD_BOUNDARY] = { AC_ERR_SYSTEM, ATA_EH_SOFTRESET,
+				     "PRB not on qword boundary" },
+	[PORT_CERR_CMD_TGTABRT]	= { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
+				    "PCI target abort while fetching PRB" },
+	[PORT_CERR_CMD_MSTABRT]	= { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
+				    "PCI master abort while fetching PRB" },
+	[PORT_CERR_CMD_PCIPERR]	= { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
+				    "PCI parity error while fetching PRB" },
+	[PORT_CERR_XFR_UNDEF]	= { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
+				    "undefined error while transferring data" },
+	[PORT_CERR_XFR_TGTABRT]	= { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
+				    "PCI target abort while transferring data" },
+	[PORT_CERR_XFR_MSTABRT]	= { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
+				    "PCI master abort while transferring data" },
+	[PORT_CERR_XFR_PCIPERR]	= { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
+				    "PCI parity error while transferring data" },
+	[PORT_CERR_SENDSERVICE]	= { AC_ERR_HSM, ATA_EH_SOFTRESET,
+				    "FIS received while sending service FIS" },
+};
+
 /*
  * ap->private_data
  *
@@ -249,12 +326,14 @@ static u8 sil24_check_status(struct ata_port *ap);
 static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg);
 static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val);
 static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf);
-static int sil24_probe_reset(struct ata_port *ap, unsigned int *classes);
 static void sil24_qc_prep(struct ata_queued_cmd *qc);
 static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc);
 static void sil24_irq_clear(struct ata_port *ap);
-static void sil24_eng_timeout(struct ata_port *ap);
 static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs *regs);
+static void sil24_freeze(struct ata_port *ap);
+static void sil24_thaw(struct ata_port *ap);
+static void sil24_error_handler(struct ata_port *ap);
+static void sil24_post_internal_cmd(struct ata_queued_cmd *qc);
 static int sil24_port_start(struct ata_port *ap);
 static void sil24_port_stop(struct ata_port *ap);
 static void sil24_host_stop(struct ata_host_set *host_set);
@@ -281,7 +360,8 @@ static struct scsi_host_template sil24_sht = {
 	.name			= DRV_NAME,
 	.ioctl			= ata_scsi_ioctl,
 	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
+	.change_queue_depth	= ata_scsi_change_queue_depth,
+	.can_queue		= SIL24_MAX_CMDS,
 	.this_id		= ATA_SHT_THIS_ID,
 	.sg_tablesize		= LIBATA_MAX_PRD,
 	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
@@ -290,6 +370,7 @@ static struct scsi_host_template sil24_sht = {
 	.proc_name		= DRV_NAME,
 	.dma_boundary		= ATA_DMA_BOUNDARY,
 	.slave_configure	= ata_scsi_slave_config,
+	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
 };
 
@@ -304,19 +385,20 @@ static const struct ata_port_operations sil24_ops = {
 
 	.tf_read		= sil24_tf_read,
 
-	.probe_reset		= sil24_probe_reset,
-
 	.qc_prep		= sil24_qc_prep,
 	.qc_issue		= sil24_qc_issue,
 
-	.eng_timeout		= sil24_eng_timeout,
-
 	.irq_handler		= sil24_interrupt,
 	.irq_clear		= sil24_irq_clear,
 
 	.scr_read		= sil24_scr_read,
 	.scr_write		= sil24_scr_write,
 
+	.freeze			= sil24_freeze,
+	.thaw			= sil24_thaw,
+	.error_handler		= sil24_error_handler,
+	.post_internal_cmd	= sil24_post_internal_cmd,
+
 	.port_start		= sil24_port_start,
 	.port_stop		= sil24_port_stop,
 	.host_stop		= sil24_host_stop,
@@ -333,9 +415,8 @@ static struct ata_port_info sil24_port_info[] = {
 	/* sil_3124 */
 	{
 		.sht		= &sil24_sht,
-		.host_flags	= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-				  ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
-				  SIL24_NPORTS2FLAG(4),
+		.host_flags	= SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(4) |
+				  SIL24_FLAG_PCIX_IRQ_WOC,
 		.pio_mask	= 0x1f,			/* pio0-4 */
 		.mwdma_mask	= 0x07,			/* mwdma0-2 */
 		.udma_mask	= 0x3f,			/* udma0-5 */
@@ -344,9 +425,7 @@ static struct ata_port_info sil24_port_info[] = {
 	/* sil_3132 */
 	{
 		.sht		= &sil24_sht,
-		.host_flags	= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-				  ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
-				  SIL24_NPORTS2FLAG(2),
+		.host_flags	= SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(2),
 		.pio_mask	= 0x1f,			/* pio0-4 */
 		.mwdma_mask	= 0x07,			/* mwdma0-2 */
 		.udma_mask	= 0x3f,			/* udma0-5 */
@@ -355,9 +434,7 @@ static struct ata_port_info sil24_port_info[] = {
 	/* sil_3131/sil_3531 */
 	{
 		.sht		= &sil24_sht,
-		.host_flags	= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-				  ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
-				  SIL24_NPORTS2FLAG(1),
+		.host_flags	= SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(1),
 		.pio_mask	= 0x1f,			/* pio0-4 */
 		.mwdma_mask	= 0x07,			/* mwdma0-2 */
 		.udma_mask	= 0x3f,			/* udma0-5 */
@@ -365,6 +442,13 @@ static struct ata_port_info sil24_port_info[] = {
 	},
 };
 
+static int sil24_tag(int tag)
+{
+	if (unlikely(ata_tag_internal(tag)))
+		return 0;
+	return tag;
+}
+
 static void sil24_dev_config(struct ata_port *ap, struct ata_device *dev)
 {
 	void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
@@ -426,56 +510,65 @@ static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
 	*tf = pp->tf;
 }
 
-static int sil24_softreset(struct ata_port *ap, int verbose,
-			   unsigned int *class)
+static int sil24_init_port(struct ata_port *ap)
+{
+	void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
+	u32 tmp;
+
+	writel(PORT_CS_INIT, port + PORT_CTRL_STAT);
+	ata_wait_register(port + PORT_CTRL_STAT,
+			  PORT_CS_INIT, PORT_CS_INIT, 10, 100);
+	tmp = ata_wait_register(port + PORT_CTRL_STAT,
+				PORT_CS_RDY, 0, 10, 100);
+
+	if ((tmp & (PORT_CS_INIT | PORT_CS_RDY)) != PORT_CS_RDY)
+		return -EIO;
+	return 0;
+}
+
+static int sil24_softreset(struct ata_port *ap, unsigned int *class)
 {
 	void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
 	struct sil24_port_priv *pp = ap->private_data;
 	struct sil24_prb *prb = &pp->cmd_block[0].ata.prb;
 	dma_addr_t paddr = pp->cmd_block_dma;
-	unsigned long timeout = jiffies + ATA_TMOUT_BOOT * HZ;
-	u32 irq_enable, irq_stat;
+	u32 mask, irq_stat;
+	const char *reason;
 
 	DPRINTK("ENTER\n");
 
-	if (!sata_dev_present(ap)) {
+	if (ata_port_offline(ap)) {
 		DPRINTK("PHY reports no device\n");
 		*class = ATA_DEV_NONE;
 		goto out;
 	}
 
-	/* temporarily turn off IRQs during SRST */
-	irq_enable = readl(port + PORT_IRQ_ENABLE_SET);
-	writel(irq_enable, port + PORT_IRQ_ENABLE_CLR);
-
-	/*
-	 * XXX: Not sure whether the following sleep is needed or not.
-	 * The original driver had it.  So....
-	 */
-	msleep(10);
+	/* put the port into known state */
+	if (sil24_init_port(ap)) {
+		reason ="port not ready";
+		goto err;
+	}
 
+	/* do SRST */
 	prb->ctrl = cpu_to_le16(PRB_CTRL_SRST);
 	prb->fis[1] = 0; /* no PM yet */
 
 	writel((u32)paddr, port + PORT_CMD_ACTIVATE);
+	writel((u64)paddr >> 32, port + PORT_CMD_ACTIVATE + 4);
 
-	do {
-		irq_stat = readl(port + PORT_IRQ_STAT);
-		writel(irq_stat, port + PORT_IRQ_STAT);		/* clear irq */
-
-		irq_stat >>= PORT_IRQ_RAW_SHIFT;
-		if (irq_stat & (PORT_IRQ_COMPLETE | PORT_IRQ_ERROR))
-			break;
+	mask = (PORT_IRQ_COMPLETE | PORT_IRQ_ERROR) << PORT_IRQ_RAW_SHIFT;
+	irq_stat = ata_wait_register(port + PORT_IRQ_STAT, mask, 0x0,
+				     100, ATA_TMOUT_BOOT / HZ * 1000);
 
-		msleep(100);
-	} while (time_before(jiffies, timeout));
-
-	/* restore IRQs */
-	writel(irq_enable, port + PORT_IRQ_ENABLE_SET);
+	writel(irq_stat, port + PORT_IRQ_STAT); /* clear IRQs */
+	irq_stat >>= PORT_IRQ_RAW_SHIFT;
 
 	if (!(irq_stat & PORT_IRQ_COMPLETE)) {
-		DPRINTK("EXIT, srst failed\n");
-		return -EIO;
+		if (irq_stat & PORT_IRQ_ERROR)
+			reason = "SRST command error";
+		else
+			reason = "timeout";
+		goto err;
 	}
 
 	sil24_update_tf(ap);
@@ -487,22 +580,57 @@ static int sil24_softreset(struct ata_port *ap, int verbose,
  out:
 	DPRINTK("EXIT, class=%u\n", *class);
 	return 0;
+
+ err:
+	ata_port_printk(ap, KERN_ERR, "softreset failed (%s)\n", reason);
+	return -EIO;
 }
 
-static int sil24_hardreset(struct ata_port *ap, int verbose,
-			   unsigned int *class)
+static int sil24_hardreset(struct ata_port *ap, unsigned int *class)
 {
-	unsigned int dummy_class;
+	void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
+	const char *reason;
+	int tout_msec, rc;
+	u32 tmp;
 
-	/* sil24 doesn't report device signature after hard reset */
-	return sata_std_hardreset(ap, verbose, &dummy_class);
-}
+	/* sil24 does the right thing(tm) without any protection */
+	sata_set_spd(ap);
 
-static int sil24_probe_reset(struct ata_port *ap, unsigned int *classes)
-{
-	return ata_drive_probe_reset(ap, ata_std_probeinit,
-				     sil24_softreset, sil24_hardreset,
-				     ata_std_postreset, classes);
+	tout_msec = 100;
+	if (ata_port_online(ap))
+		tout_msec = 5000;
+
+	writel(PORT_CS_DEV_RST, port + PORT_CTRL_STAT);
+	tmp = ata_wait_register(port + PORT_CTRL_STAT,
+				PORT_CS_DEV_RST, PORT_CS_DEV_RST, 10, tout_msec);
+
+	/* SStatus oscillates between zero and valid status after
+	 * DEV_RST, debounce it.
+	 */
+	rc = sata_phy_debounce(ap, sata_deb_timing_before_fsrst);
+	if (rc) {
+		reason = "PHY debouncing failed";
+		goto err;
+	}
+
+	if (tmp & PORT_CS_DEV_RST) {
+		if (ata_port_offline(ap))
+			return 0;
+		reason = "link not ready";
+		goto err;
+	}
+
+	/* Sil24 doesn't store signature FIS after hardreset, so we
+	 * can't wait for BSY to clear.  Some devices take a long time
+	 * to get ready and those devices will choke if we don't wait
+	 * for BSY clearance here.  Tell libata to perform follow-up
+	 * softreset.
+	 */
+	return -EAGAIN;
+
+ err:
+	ata_port_printk(ap, KERN_ERR, "hardreset failed (%s)\n", reason);
+	return -EIO;
 }
 
 static inline void sil24_fill_sg(struct ata_queued_cmd *qc,
@@ -528,17 +656,20 @@ static void sil24_qc_prep(struct ata_queued_cmd *qc)
 {
 	struct ata_port *ap = qc->ap;
 	struct sil24_port_priv *pp = ap->private_data;
-	union sil24_cmd_block *cb = pp->cmd_block + qc->tag;
+	union sil24_cmd_block *cb;
 	struct sil24_prb *prb;
 	struct sil24_sge *sge;
+	u16 ctrl = 0;
+
+	cb = &pp->cmd_block[sil24_tag(qc->tag)];
 
 	switch (qc->tf.protocol) {
 	case ATA_PROT_PIO:
 	case ATA_PROT_DMA:
+	case ATA_PROT_NCQ:
 	case ATA_PROT_NODATA:
 		prb = &cb->ata.prb;
 		sge = cb->ata.sge;
-		prb->ctrl = 0;
 		break;
 
 	case ATA_PROT_ATAPI:
@@ -551,12 +682,10 @@ static void sil24_qc_prep(struct ata_queued_cmd *qc)
 
 		if (qc->tf.protocol != ATA_PROT_ATAPI_NODATA) {
 			if (qc->tf.flags & ATA_TFLAG_WRITE)
-				prb->ctrl = cpu_to_le16(PRB_CTRL_PACKET_WRITE);
+				ctrl = PRB_CTRL_PACKET_WRITE;
 			else
-				prb->ctrl = cpu_to_le16(PRB_CTRL_PACKET_READ);
-		} else
-			prb->ctrl = 0;
-
+				ctrl = PRB_CTRL_PACKET_READ;
+		}
 		break;
 
 	default:
@@ -565,6 +694,7 @@ static void sil24_qc_prep(struct ata_queued_cmd *qc)
 		BUG();
 	}
 
+	prb->ctrl = cpu_to_le16(ctrl);
 	ata_tf_to_fis(&qc->tf, prb->fis, 0);
 
 	if (qc->flags & ATA_QCFLAG_DMAMAP)
@@ -574,11 +704,18 @@ static void sil24_qc_prep(struct ata_queued_cmd *qc)
 static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc)
 {
 	struct ata_port *ap = qc->ap;
-	void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
 	struct sil24_port_priv *pp = ap->private_data;
-	dma_addr_t paddr = pp->cmd_block_dma + qc->tag * sizeof(*pp->cmd_block);
+	void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
+	unsigned int tag = sil24_tag(qc->tag);
+	dma_addr_t paddr;
+	void __iomem *activate;
+
+	paddr = pp->cmd_block_dma + tag * sizeof(*pp->cmd_block);
+	activate = port + PORT_CMD_ACTIVATE + tag * 8;
+
+	writel((u32)paddr, activate);
+	writel((u64)paddr >> 32, activate + 4);
 
-	writel((u32)paddr, port + PORT_CMD_ACTIVATE);
 	return 0;
 }
 
@@ -587,162 +724,139 @@ static void sil24_irq_clear(struct ata_port *ap)
 	/* unused */
 }
 
-static int __sil24_restart_controller(void __iomem *port)
+static void sil24_freeze(struct ata_port *ap)
 {
-	u32 tmp;
-	int cnt;
-
-	writel(PORT_CS_INIT, port + PORT_CTRL_STAT);
-
-	/* Max ~10ms */
-	for (cnt = 0; cnt < 10000; cnt++) {
-		tmp = readl(port + PORT_CTRL_STAT);
-		if (tmp & PORT_CS_RDY)
-			return 0;
-		udelay(1);
-	}
+	void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
 
-	return -1;
+	/* Port-wide IRQ mask in HOST_CTRL doesn't really work, clear
+	 * PORT_IRQ_ENABLE instead.
+	 */
+	writel(0xffff, port + PORT_IRQ_ENABLE_CLR);
 }
 
-static void sil24_restart_controller(struct ata_port *ap)
+static void sil24_thaw(struct ata_port *ap)
 {
-	if (__sil24_restart_controller((void __iomem *)ap->ioaddr.cmd_addr))
-		printk(KERN_ERR DRV_NAME
-		       " ata%u: failed to restart controller\n", ap->id);
+	void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
+	u32 tmp;
+
+	/* clear IRQ */
+	tmp = readl(port + PORT_IRQ_STAT);
+	writel(tmp, port + PORT_IRQ_STAT);
+
+	/* turn IRQ back on */
+	writel(DEF_PORT_IRQ, port + PORT_IRQ_ENABLE_SET);
 }
 
-static int __sil24_reset_controller(void __iomem *port)
+static void sil24_error_intr(struct ata_port *ap)
 {
-	int cnt;
-	u32 tmp;
+	void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
+	struct ata_eh_info *ehi = &ap->eh_info;
+	int freeze = 0;
+	u32 irq_stat;
 
-	/* Reset controller state.  Is this correct? */
-	writel(PORT_CS_DEV_RST, port + PORT_CTRL_STAT);
-	readl(port + PORT_CTRL_STAT);	/* sync */
+	/* on error, we need to clear IRQ explicitly */
+	irq_stat = readl(port + PORT_IRQ_STAT);
+	writel(irq_stat, port + PORT_IRQ_STAT);
 
-	/* Max ~100ms */
-	for (cnt = 0; cnt < 1000; cnt++) {
-		udelay(100);
-		tmp = readl(port + PORT_CTRL_STAT);
-		if (!(tmp & PORT_CS_DEV_RST))
-			break;
-	}
+	/* first, analyze and record host port events */
+	ata_ehi_clear_desc(ehi);
 
-	if (tmp & PORT_CS_DEV_RST)
-		return -1;
+	ata_ehi_push_desc(ehi, "irq_stat 0x%08x", irq_stat);
 
-	if (tmp & PORT_CS_RDY)
-		return 0;
+	if (irq_stat & (PORT_IRQ_PHYRDY_CHG | PORT_IRQ_DEV_XCHG)) {
+		ata_ehi_hotplugged(ehi);
+		ata_ehi_push_desc(ehi, ", %s",
+			       irq_stat & PORT_IRQ_PHYRDY_CHG ?
+			       "PHY RDY changed" : "device exchanged");
+		freeze = 1;
+	}
 
-	return __sil24_restart_controller(port);
-}
+	if (irq_stat & PORT_IRQ_UNK_FIS) {
+		ehi->err_mask |= AC_ERR_HSM;
+		ehi->action |= ATA_EH_SOFTRESET;
+		ata_ehi_push_desc(ehi , ", unknown FIS");
+		freeze = 1;
+	}
 
-static void sil24_reset_controller(struct ata_port *ap)
-{
-	printk(KERN_NOTICE DRV_NAME
-	       " ata%u: resetting controller...\n", ap->id);
-	if (__sil24_reset_controller((void __iomem *)ap->ioaddr.cmd_addr))
-                printk(KERN_ERR DRV_NAME
-                       " ata%u: failed to reset controller\n", ap->id);
-}
+	/* deal with command error */
+	if (irq_stat & PORT_IRQ_ERROR) {
+		struct sil24_cerr_info *ci = NULL;
+		unsigned int err_mask = 0, action = 0;
+		struct ata_queued_cmd *qc;
+		u32 cerr;
+
+		/* analyze CMD_ERR */
+		cerr = readl(port + PORT_CMD_ERR);
+		if (cerr < ARRAY_SIZE(sil24_cerr_db))
+			ci = &sil24_cerr_db[cerr];
+
+		if (ci && ci->desc) {
+			err_mask |= ci->err_mask;
+			action |= ci->action;
+			ata_ehi_push_desc(ehi, ", %s", ci->desc);
+		} else {
+			err_mask |= AC_ERR_OTHER;
+			action |= ATA_EH_SOFTRESET;
+			ata_ehi_push_desc(ehi, ", unknown command error %d",
+					  cerr);
+		}
 
-static void sil24_eng_timeout(struct ata_port *ap)
-{
-	struct ata_queued_cmd *qc;
+		/* record error info */
+		qc = ata_qc_from_tag(ap, ap->active_tag);
+		if (qc) {
+			sil24_update_tf(ap);
+			qc->err_mask |= err_mask;
+		} else
+			ehi->err_mask |= err_mask;
 
-	qc = ata_qc_from_tag(ap, ap->active_tag);
+		ehi->action |= action;
+	}
 
-	printk(KERN_ERR "ata%u: command timeout\n", ap->id);
-	qc->err_mask |= AC_ERR_TIMEOUT;
-	ata_eh_qc_complete(qc);
+	/* freeze or abort */
+	if (freeze)
+		ata_port_freeze(ap);
+	else
+		ata_port_abort(ap);
+}
 
-	sil24_reset_controller(ap);
+static void sil24_finish_qc(struct ata_queued_cmd *qc)
+{
+	if (qc->flags & ATA_QCFLAG_RESULT_TF)
+		sil24_update_tf(qc->ap);
 }
 
-static void sil24_error_intr(struct ata_port *ap, u32 slot_stat)
+static inline void sil24_host_intr(struct ata_port *ap)
 {
-	struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag);
-	struct sil24_port_priv *pp = ap->private_data;
 	void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
-	u32 irq_stat, cmd_err, sstatus, serror;
-	unsigned int err_mask;
+	u32 slot_stat, qc_active;
+	int rc;
 
-	irq_stat = readl(port + PORT_IRQ_STAT);
-	writel(irq_stat, port + PORT_IRQ_STAT);		/* clear irq */
+	slot_stat = readl(port + PORT_SLOT_STAT);
 
-	if (!(irq_stat & PORT_IRQ_ERROR)) {
-		/* ignore non-completion, non-error irqs for now */
-		printk(KERN_WARNING DRV_NAME
-		       "ata%u: non-error exception irq (irq_stat %x)\n",
-		       ap->id, irq_stat);
+	if (unlikely(slot_stat & HOST_SSTAT_ATTN)) {
+		sil24_error_intr(ap);
 		return;
 	}
 
-	cmd_err = readl(port + PORT_CMD_ERR);
-	sstatus = readl(port + PORT_SSTATUS);
-	serror = readl(port + PORT_SERROR);
-	if (serror)
-		writel(serror, port + PORT_SERROR);
+	if (ap->flags & SIL24_FLAG_PCIX_IRQ_WOC)
+		writel(PORT_IRQ_COMPLETE, port + PORT_IRQ_STAT);
 
-	/*
-	 * Don't log ATAPI device errors.  They're supposed to happen
-	 * and any serious errors will be logged using sense data by
-	 * the SCSI layer.
-	 */
-	if (ap->device[0].class != ATA_DEV_ATAPI || cmd_err > PORT_CERR_SDB)
-		printk("ata%u: error interrupt on port%d\n"
-		       "  stat=0x%x irq=0x%x cmd_err=%d sstatus=0x%x serror=0x%x\n",
-		       ap->id, ap->port_no, slot_stat, irq_stat, cmd_err, sstatus, serror);
-
-	if (cmd_err == PORT_CERR_DEV || cmd_err == PORT_CERR_SDB) {
-		/*
-		 * Device is reporting error, tf registers are valid.
-		 */
-		sil24_update_tf(ap);
-		err_mask = ac_err_mask(pp->tf.command);
-		sil24_restart_controller(ap);
-	} else {
-		/*
-		 * Other errors.  libata currently doesn't have any
-		 * mechanism to report these errors.  Just turn on
-		 * ATA_ERR.
-		 */
-		err_mask = AC_ERR_OTHER;
-		sil24_reset_controller(ap);
+	qc_active = slot_stat & ~HOST_SSTAT_ATTN;
+	rc = ata_qc_complete_multiple(ap, qc_active, sil24_finish_qc);
+	if (rc > 0)
+		return;
+	if (rc < 0) {
+		struct ata_eh_info *ehi = &ap->eh_info;
+		ehi->err_mask |= AC_ERR_HSM;
+		ehi->action |= ATA_EH_SOFTRESET;
+		ata_port_freeze(ap);
+		return;
 	}
 
-	if (qc) {
-		qc->err_mask |= err_mask;
-		ata_qc_complete(qc);
-	}
-}
-
-static inline void sil24_host_intr(struct ata_port *ap)
-{
-	struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag);
-	void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
-	u32 slot_stat;
-
-	slot_stat = readl(port + PORT_SLOT_STAT);
-	if (!(slot_stat & HOST_SSTAT_ATTN)) {
-		struct sil24_port_priv *pp = ap->private_data;
-		/*
-		 * !HOST_SSAT_ATTN guarantees successful completion,
-		 * so reading back tf registers is unnecessary for
-		 * most commands.  TODO: read tf registers for
-		 * commands which require these values on successful
-		 * completion (EXECUTE DEVICE DIAGNOSTIC, CHECK POWER,
-		 * DEVICE RESET and READ PORT MULTIPLIER (any more?).
-		 */
-		sil24_update_tf(ap);
-
-		if (qc) {
-			qc->err_mask |= ac_err_mask(pp->tf.command);
-			ata_qc_complete(qc);
-		}
-	} else
-		sil24_error_intr(ap, slot_stat);
+	if (ata_ratelimit())
+		ata_port_printk(ap, KERN_INFO, "spurious interrupt "
+			"(slot_stat 0x%x active_tag %d sactive 0x%x)\n",
+			slot_stat, ap->active_tag, ap->sactive);
 }
 
 static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs *regs)
@@ -769,7 +883,7 @@ static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs *
 	for (i = 0; i < host_set->n_ports; i++)
 		if (status & (1 << i)) {
 			struct ata_port *ap = host_set->ports[i];
-			if (ap && !(ap->flags & ATA_FLAG_PORT_DISABLED)) {
+			if (ap && !(ap->flags & ATA_FLAG_DISABLED)) {
 				sil24_host_intr(host_set->ports[i]);
 				handled++;
 			} else
@@ -782,9 +896,35 @@ static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs *
 	return IRQ_RETVAL(handled);
 }
 
+static void sil24_error_handler(struct ata_port *ap)
+{
+	struct ata_eh_context *ehc = &ap->eh_context;
+
+	if (sil24_init_port(ap)) {
+		ata_eh_freeze_port(ap);
+		ehc->i.action |= ATA_EH_HARDRESET;
+	}
+
+	/* perform recovery */
+	ata_do_eh(ap, ata_std_prereset, sil24_softreset, sil24_hardreset,
+		  ata_std_postreset);
+}
+
+static void sil24_post_internal_cmd(struct ata_queued_cmd *qc)
+{
+	struct ata_port *ap = qc->ap;
+
+	if (qc->flags & ATA_QCFLAG_FAILED)
+		qc->err_mask |= AC_ERR_OTHER;
+
+	/* make DMA engine forget about the failed command */
+	if (qc->err_mask)
+		sil24_init_port(ap);
+}
+
 static inline void sil24_cblk_free(struct sil24_port_priv *pp, struct device *dev)
 {
-	const size_t cb_size = sizeof(*pp->cmd_block);
+	const size_t cb_size = sizeof(*pp->cmd_block) * SIL24_MAX_CMDS;
 
 	dma_free_coherent(dev, cb_size, pp->cmd_block, pp->cmd_block_dma);
 }
@@ -794,7 +934,7 @@ static int sil24_port_start(struct ata_port *ap)
 	struct device *dev = ap->host_set->dev;
 	struct sil24_port_priv *pp;
 	union sil24_cmd_block *cb;
-	size_t cb_size = sizeof(*cb);
+	size_t cb_size = sizeof(*cb) * SIL24_MAX_CMDS;
 	dma_addr_t cb_dma;
 	int rc = -ENOMEM;
 
@@ -858,6 +998,7 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	void __iomem *host_base = NULL;
 	void __iomem *port_base = NULL;
 	int i, rc;
+	u32 tmp;
 
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
@@ -910,37 +1051,53 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	/*
 	 * Configure the device
 	 */
-	/*
-	 * FIXME: This device is certainly 64-bit capable.  We just
-	 * don't know how to use it.  After fixing 32bit activation in
-	 * this function, enable 64bit masks here.
-	 */
-	rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
-	if (rc) {
-		dev_printk(KERN_ERR, &pdev->dev,
-			   "32-bit DMA enable failed\n");
-		goto out_free;
-	}
-	rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
-	if (rc) {
-		dev_printk(KERN_ERR, &pdev->dev,
-			   "32-bit consistent DMA enable failed\n");
-		goto out_free;
+	if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
+		rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
+		if (rc) {
+			rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+			if (rc) {
+				dev_printk(KERN_ERR, &pdev->dev,
+					   "64-bit DMA enable failed\n");
+				goto out_free;
+			}
+		}
+	} else {
+		rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+		if (rc) {
+			dev_printk(KERN_ERR, &pdev->dev,
+				   "32-bit DMA enable failed\n");
+			goto out_free;
+		}
+		rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+		if (rc) {
+			dev_printk(KERN_ERR, &pdev->dev,
+				   "32-bit consistent DMA enable failed\n");
+			goto out_free;
+		}
 	}
 
 	/* GPIO off */
 	writel(0, host_base + HOST_FLASH_CMD);
 
-	/* Mask interrupts during initialization */
+	/* Apply workaround for completion IRQ loss on PCI-X errata */
+	if (probe_ent->host_flags & SIL24_FLAG_PCIX_IRQ_WOC) {
+		tmp = readl(host_base + HOST_CTRL);
+		if (tmp & (HOST_CTRL_TRDY | HOST_CTRL_STOP | HOST_CTRL_DEVSEL))
+			dev_printk(KERN_INFO, &pdev->dev,
+				   "Applying completion IRQ loss on PCI-X "
+				   "errata fix\n");
+		else
+			probe_ent->host_flags &= ~SIL24_FLAG_PCIX_IRQ_WOC;
+	}
+
+	/* clear global reset & mask interrupts during initialization */
 	writel(0, host_base + HOST_CTRL);
 
 	for (i = 0; i < probe_ent->n_ports; i++) {
 		void __iomem *port = port_base + i * PORT_REGS_SIZE;
 		unsigned long portu = (unsigned long)port;
-		u32 tmp;
-		int cnt;
 
-		probe_ent->port[i].cmd_addr = portu + PORT_PRB;
+		probe_ent->port[i].cmd_addr = portu;
 		probe_ent->port[i].scr_addr = portu + PORT_SCONTROL;
 
 		ata_std_ports(&probe_ent->port[i]);
@@ -952,18 +1109,20 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		tmp = readl(port + PORT_CTRL_STAT);
 		if (tmp & PORT_CS_PORT_RST) {
 			writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR);
-			readl(port + PORT_CTRL_STAT);	/* sync */
-			for (cnt = 0; cnt < 10; cnt++) {
-				msleep(10);
-				tmp = readl(port + PORT_CTRL_STAT);
-				if (!(tmp & PORT_CS_PORT_RST))
-					break;
-			}
+			tmp = ata_wait_register(port + PORT_CTRL_STAT,
+						PORT_CS_PORT_RST,
+						PORT_CS_PORT_RST, 10, 100);
 			if (tmp & PORT_CS_PORT_RST)
 				dev_printk(KERN_ERR, &pdev->dev,
 				           "failed to clear port RST\n");
 		}
 
+		/* Configure IRQ WoC */
+		if (probe_ent->host_flags & SIL24_FLAG_PCIX_IRQ_WOC)
+			writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_STAT);
+		else
+			writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR);
+
 		/* Zero error counters. */
 		writel(0x8000, port + PORT_DECODE_ERR_THRESH);
 		writel(0x8000, port + PORT_CRC_ERR_THRESH);
@@ -972,26 +1131,11 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		writel(0x0000, port + PORT_CRC_ERR_CNT);
 		writel(0x0000, port + PORT_HSHK_ERR_CNT);
 
-		/* FIXME: 32bit activation? */
-		writel(0, port + PORT_ACTIVATE_UPPER_ADDR);
-		writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_STAT);
-
-		/* Configure interrupts */
-		writel(0xffff, port + PORT_IRQ_ENABLE_CLR);
-		writel(PORT_IRQ_COMPLETE | PORT_IRQ_ERROR | PORT_IRQ_SDB_FIS,
-		       port + PORT_IRQ_ENABLE_SET);
-
-		/* Clear interrupts */
-		writel(0x0fff0fff, port + PORT_IRQ_STAT);
-		writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR);
+		/* Always use 64bit activation */
+		writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_CLR);
 
 		/* Clear port multiplier enable and resume bits */
 		writel(PORT_CS_PM_EN | PORT_CS_RESUME, port + PORT_CTRL_CLR);
-
-		/* Reset itself */
-		if (__sil24_reset_controller(port))
-			dev_printk(KERN_ERR, &pdev->dev,
-			           "failed to reset controller\n");
 	}
 
 	/* Turn on interrupts */