diff options
Diffstat (limited to 'drivers/scsi/sata_sil.c')
-rw-r--r-- | drivers/scsi/sata_sil.c | 126 |
1 files changed, 50 insertions, 76 deletions
diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c index 9face3c6aa2..4f2a67ed39d 100644 --- a/drivers/scsi/sata_sil.c +++ b/drivers/scsi/sata_sil.c @@ -49,24 +49,30 @@ #define DRV_VERSION "0.9" enum { + /* + * host flags + */ SIL_FLAG_RERR_ON_DMA_ACT = (1 << 29), SIL_FLAG_MOD15WRITE = (1 << 30), + SIL_DFL_HOST_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_MMIO, + /* + * Controller IDs + */ sil_3112 = 0, - sil_3112_m15w = 1, - sil_3512 = 2, - sil_3114 = 3, - - SIL_FIFO_R0 = 0x40, - SIL_FIFO_W0 = 0x41, - SIL_FIFO_R1 = 0x44, - SIL_FIFO_W1 = 0x45, - SIL_FIFO_R2 = 0x240, - SIL_FIFO_W2 = 0x241, - SIL_FIFO_R3 = 0x244, - SIL_FIFO_W3 = 0x245, + sil_3512 = 1, + sil_3114 = 2, + /* + * Register offsets + */ SIL_SYSCFG = 0x48, + + /* + * Register bits + */ + /* SYSCFG */ SIL_MASK_IDE0_INT = (1 << 22), SIL_MASK_IDE1_INT = (1 << 23), SIL_MASK_IDE2_INT = (1 << 24), @@ -75,9 +81,12 @@ enum { SIL_MASK_4PORT = SIL_MASK_2PORT | SIL_MASK_IDE2_INT | SIL_MASK_IDE3_INT, - SIL_IDE2_BMDMA = 0x200, - + /* BMDMA/BMDMA2 */ SIL_INTR_STEERING = (1 << 1), + + /* + * Others + */ SIL_QUIRK_MOD15WRITE = (1 << 0), SIL_QUIRK_UDMA5MAX = (1 << 1), }; @@ -90,13 +99,13 @@ static void sil_post_set_mode (struct ata_port *ap); static const struct pci_device_id sil_pci_tbl[] = { - { 0x1095, 0x3112, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w }, - { 0x1095, 0x0240, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w }, + { 0x1095, 0x3112, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, + { 0x1095, 0x0240, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, { 0x1095, 0x3512, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3512 }, { 0x1095, 0x3114, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3114 }, - { 0x1002, 0x436e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w }, - { 0x1002, 0x4379, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w }, - { 0x1002, 0x437a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w }, + { 0x1002, 0x436e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, + { 0x1002, 0x4379, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, + { 0x1002, 0x437a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, { } /* terminate list */ }; @@ -137,11 +146,11 @@ static struct scsi_host_template sil_sht = { .name = DRV_NAME, .ioctl = ata_scsi_ioctl, .queuecommand = ata_scsi_queuecmd, + .eh_timed_out = ata_scsi_timed_out, .eh_strategy_handler = ata_scsi_error, .can_queue = ATA_DEF_QUEUE, .this_id = ATA_SHT_THIS_ID, .sg_tablesize = LIBATA_MAX_PRD, - .max_sectors = ATA_MAX_SECTORS, .cmd_per_lun = ATA_SHT_CMD_PER_LUN, .emulated = ATA_SHT_EMULATED, .use_clustering = ATA_SHT_USE_CLUSTERING, @@ -159,7 +168,7 @@ static const struct ata_port_operations sil_ops = { .check_status = ata_check_status, .exec_command = ata_exec_command, .dev_select = ata_std_dev_select, - .phy_reset = sata_phy_reset, + .probe_reset = ata_std_probe_reset, .post_set_mode = sil_post_set_mode, .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, @@ -181,19 +190,7 @@ static const struct ata_port_info sil_port_info[] = { /* sil_3112 */ { .sht = &sil_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_SRST | ATA_FLAG_MMIO, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = 0x3f, /* udma0-5 */ - .port_ops = &sil_ops, - }, - /* sil_3112_15w - keep it sync'd w/ sil_3112 */ - { - .sht = &sil_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_SRST | ATA_FLAG_MMIO | - SIL_FLAG_MOD15WRITE, + .host_flags = SIL_DFL_HOST_FLAGS | SIL_FLAG_MOD15WRITE, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x3f, /* udma0-5 */ @@ -202,9 +199,7 @@ static const struct ata_port_info sil_port_info[] = { /* sil_3512 */ { .sht = &sil_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_SRST | ATA_FLAG_MMIO | - SIL_FLAG_RERR_ON_DMA_ACT, + .host_flags = SIL_DFL_HOST_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x3f, /* udma0-5 */ @@ -213,9 +208,7 @@ static const struct ata_port_info sil_port_info[] = { /* sil_3114 */ { .sht = &sil_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_SRST | ATA_FLAG_MMIO | - SIL_FLAG_RERR_ON_DMA_ACT, + .host_flags = SIL_DFL_HOST_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x3f, /* udma0-5 */ @@ -229,16 +222,17 @@ static const struct { unsigned long tf; /* ATA taskfile register block */ unsigned long ctl; /* ATA control/altstatus register block */ unsigned long bmdma; /* DMA register block */ + unsigned long fifo_cfg; /* FIFO Valid Byte Count and Control */ unsigned long scr; /* SATA control register block */ unsigned long sien; /* SATA Interrupt Enable register */ unsigned long xfer_mode;/* data transfer mode register */ unsigned long sfis_cfg; /* SATA FIS reception config register */ } sil_port[] = { /* port 0 ... */ - { 0x80, 0x8A, 0x00, 0x100, 0x148, 0xb4, 0x14c }, - { 0xC0, 0xCA, 0x08, 0x180, 0x1c8, 0xf4, 0x1cc }, - { 0x280, 0x28A, 0x200, 0x300, 0x348, 0x2b4, 0x34c }, - { 0x2C0, 0x2CA, 0x208, 0x380, 0x3c8, 0x2f4, 0x3cc }, + { 0x80, 0x8A, 0x00, 0x40, 0x100, 0x148, 0xb4, 0x14c }, + { 0xC0, 0xCA, 0x08, 0x44, 0x180, 0x1c8, 0xf4, 0x1cc }, + { 0x280, 0x28A, 0x200, 0x240, 0x300, 0x348, 0x2b4, 0x34c }, + { 0x2C0, 0x2CA, 0x208, 0x244, 0x380, 0x3c8, 0x2f4, 0x3cc }, /* ... port 3 */ }; @@ -354,22 +348,12 @@ static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) static void sil_dev_config(struct ata_port *ap, struct ata_device *dev) { unsigned int n, quirks = 0; - unsigned char model_num[40]; - const char *s; - unsigned int len; + unsigned char model_num[41]; - ata_dev_id_string(dev->id, model_num, ATA_ID_PROD_OFS, - sizeof(model_num)); - s = &model_num[0]; - len = strnlen(s, sizeof(model_num)); - - /* ATAPI specifies that empty space is blank-filled; remove blanks */ - while ((len > 0) && (s[len - 1] == ' ')) - len--; + ata_id_c_string(dev->id, model_num, ATA_ID_PROD_OFS, sizeof(model_num)); for (n = 0; sil_blacklist[n].product; n++) - if (!memcmp(sil_blacklist[n].product, s, - strlen(sil_blacklist[n].product))) { + if (!strcmp(sil_blacklist[n].product, model_num)) { quirks = sil_blacklist[n].quirk; break; } @@ -380,16 +364,14 @@ static void sil_dev_config(struct ata_port *ap, struct ata_device *dev) (quirks & SIL_QUIRK_MOD15WRITE))) { printk(KERN_INFO "ata%u(%u): applying Seagate errata fix (mod15write workaround)\n", ap->id, dev->devno); - ap->host->max_sectors = 15; - ap->host->hostt->max_sectors = 15; - dev->flags |= ATA_DFLAG_LOCK_SECTORS; + dev->max_sectors = 15; return; } /* limit to udma5 */ if (quirks & SIL_QUIRK_UDMA5MAX) { printk(KERN_INFO "ata%u(%u): applying Maxtor errata fix %s\n", - ap->id, dev->devno, s); + ap->id, dev->devno, model_num); ap->udma_mask &= ATA_UDMA5; return; } @@ -431,13 +413,12 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) if (rc) goto err_out_regions; - probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL); + probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL); if (probe_ent == NULL) { rc = -ENOMEM; goto err_out_regions; } - memset(probe_ent, 0, sizeof(*probe_ent)); INIT_LIST_HEAD(&probe_ent->node); probe_ent->dev = pci_dev_to_dev(pdev); probe_ent->port_ops = sil_port_info[ent->driver_data].port_ops; @@ -474,19 +455,12 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) if (cls) { cls >>= 3; cls++; /* cls = (line_size/8)+1 */ - writeb(cls, mmio_base + SIL_FIFO_R0); - writeb(cls, mmio_base + SIL_FIFO_W0); - writeb(cls, mmio_base + SIL_FIFO_R1); - writeb(cls, mmio_base + SIL_FIFO_W1); - if (ent->driver_data == sil_3114) { - writeb(cls, mmio_base + SIL_FIFO_R2); - writeb(cls, mmio_base + SIL_FIFO_W2); - writeb(cls, mmio_base + SIL_FIFO_R3); - writeb(cls, mmio_base + SIL_FIFO_W3); - } + for (i = 0; i < probe_ent->n_ports; i++) + writew(cls << 8 | cls, + mmio_base + sil_port[i].fifo_cfg); } else dev_printk(KERN_WARNING, &pdev->dev, - "cache line size not set. Driver may not function\n"); + "cache line size not set. Driver may not function\n"); /* Apply R_ERR on DMA activate FIS errata workaround */ if (probe_ent->host_flags & SIL_FLAG_RERR_ON_DMA_ACT) { @@ -509,10 +483,10 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) irq_mask = SIL_MASK_4PORT; /* flip the magic "make 4 ports work" bit */ - tmp = readl(mmio_base + SIL_IDE2_BMDMA); + tmp = readl(mmio_base + sil_port[2].bmdma); if ((tmp & SIL_INTR_STEERING) == 0) writel(tmp | SIL_INTR_STEERING, - mmio_base + SIL_IDE2_BMDMA); + mmio_base + sil_port[2].bmdma); } else { irq_mask = SIL_MASK_2PORT; |