diff options
Diffstat (limited to 'drivers/scsi/qla2xxx/qla_os.c')
| -rw-r--r-- | drivers/scsi/qla2xxx/qla_os.c | 30 |
1 files changed, 22 insertions, 8 deletions
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index e02df276804..4cace3f20c0 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -106,17 +106,21 @@ MODULE_PARM_DESC(ql2xmaxqdepth, "Maximum queue depth to report for target devices."); /* Do not change the value of this after module load */ -int ql2xenabledif = 1; +int ql2xenabledif = 0; module_param(ql2xenabledif, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(ql2xenabledif, " Enable T10-CRC-DIF " - " Default is 0 - No DIF Support. 1 - Enable it"); + " Default is 0 - No DIF Support. 1 - Enable it" + ", 2 - Enable DIF for all types, except Type 0."); -int ql2xenablehba_err_chk; +int ql2xenablehba_err_chk = 2; module_param(ql2xenablehba_err_chk, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(ql2xenablehba_err_chk, - " Enable T10-CRC-DIF Error isolation by HBA" - " Default is 0 - Error isolation disabled, 1 - Enable it"); + " Enable T10-CRC-DIF Error isolation by HBA:\n" + " Default is 1.\n" + " 0 -- Error isolation disabled\n" + " 1 -- Error isolation enabled only for DIX Type 0\n" + " 2 -- Error isolation enabled for all Types\n"); int ql2xiidmaenable=1; module_param(ql2xiidmaenable, int, S_IRUGO); @@ -909,7 +913,14 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd) "Abort command mbx success.\n"); wait = 1; } + + spin_lock_irqsave(&ha->hardware_lock, flags); qla2x00_sp_compl(ha, sp); + spin_unlock_irqrestore(&ha->hardware_lock, flags); + + /* Did the command return during mailbox execution? */ + if (ret == FAILED && !CMD_SP(cmd)) + ret = SUCCESS; /* Wait for the command to be returned. */ if (wait) { @@ -2251,7 +2262,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) host->this_id = 255; host->cmd_per_lun = 3; host->unique_id = host->host_no; - if ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) && ql2xenabledif) + if (IS_T10_PI_CAPABLE(ha) && ql2xenabledif) host->max_cmd_len = 32; else host->max_cmd_len = MAX_CMDSZ; @@ -2378,13 +2389,16 @@ skip_dpc: "Detected hba at address=%p.\n", ha); - if ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) && ql2xenabledif) { + if (IS_T10_PI_CAPABLE(ha) && ql2xenabledif) { if (ha->fw_attributes & BIT_4) { + int prot = 0; base_vha->flags.difdix_supported = 1; ql_dbg(ql_dbg_init, base_vha, 0x00f1, "Registering for DIF/DIX type 1 and 3 protection.\n"); + if (ql2xenabledif == 1) + prot = SHOST_DIX_TYPE0_PROTECTION; scsi_host_set_prot(host, - SHOST_DIF_TYPE1_PROTECTION + prot | SHOST_DIF_TYPE1_PROTECTION | SHOST_DIF_TYPE2_PROTECTION | SHOST_DIF_TYPE3_PROTECTION | SHOST_DIX_TYPE1_PROTECTION |